[BEGIN] 2022/11/11 16:35:05 [0000.305] I> Boot-device: eMMC [0000.312] I> sdmmc bdev is already initialized [0000.317] I> pmic: reset reason (nverc) : 0x80 [0000.350] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.369] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.375] W> No valid slot number is found in scratch register [0000.381] W> Return default slot: _a [0000.385] I> A/B: bin_type (16) slot 0 [0000.388] I> Loading partition bpmp-fw at 0xd7800000 [0000.393] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.398] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.423] I> Binary(16) of size 534416 is loaded @ 0xd7800000 [0000.429] W> No valid slot number is found in scratch register [0000.434] W> Return default slot: _a [0000.438] I> A/B: bin_type (17) slot 0 [0000.441] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.447] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.452] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.478] I> Binary(17) of size 604720 is loaded @ 0xd796c400 [0000.708] I> Loading SCE-FW ... [0000.711] W> No valid slot number is found in scratch register [0000.716] W> Return default slot: _a [0000.720] I> A/B: bin_type (12) slot 0 [0000.724] I> Loading partition sce-fw at 0xd7300000 [0000.728] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.734] I> Addr: 0xd7300000, start-block: 58784120, num_blocks: 1 [0000.753] I> Binary(12) of size 125632 is loaded @ 0xd7300000 [0000.759] I> Init SCE [0000.761] I> Loading APE-FW ... [0000.764] W> No valid slot number is found in scratch register [0000.770] W> Return default slot: _a [0000.773] I> A/B: bin_type (11) slot 0 [0000.777] I> Loading partition adsp-fw at 0xd7400000 [0000.781] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.787] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.806] I> Binary(11) of size 77216 is loaded @ 0xd7400000 [0000.812] I> Copy BTCM section [0000.815] W> No valid slot number is found in scratch register [0000.820] W> Return default slot: _a [0000.824] I> A/B: bin_type (13) slot 0 [0000.827] I> Loading partition cpu-bootloader at 0x96000000 [0000.833] I> Reading two headers - addr:0x96000000 blocks:1 [0000.838] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.860] I> Binary(13) of size 308800 is loaded @ 0x96000000 [0000.865] W> No valid slot number is found in scratch register [0000.871] W> Return default slot: _a [0000.874] I> A/B: bin_type (20) slot 0 [0000.878] I> Loading partition bootloader-dtb at 0x85205400 [0000.883] I> Reading two headers - addr:0x85205400 blocks:1 [0000.889] I> Addr: 0x85205400, start-block: 58742792, num_blocks: 1 [0000.909] I> Binary(20) of size 263744 is loaded @ 0x85205400 [0000.915] W> No valid slot number is found in scratch register [0000.921] W> Return default slot: _a [0000.924] I> A/B: bin_type (14) slot 0 [0000.928] I> Loading partition secure-os at 0x85305600 [0000.933] I> Reading two headers - addr:0x85305600 blocks:1 [0000.938] I> Addr: 0x85305600, start-block: 58744840, num_blocks: 1 [0000.960] I> Binary(14) of size 402864 is loaded @ 0x85305600 [0000.968] I> TOS boot-params @ 0x85000000 [0000.972] I> TOS params prepared [0000.975] I> Loading EKS ... [0000.978] I> A/B: bin_type (15) slot 0 [0000.981] I> Loading partition eks at 0x85905800 [0000.986] I> Reading two headers - addr:0x85905800 blocks:1 [0000.991] I> Addr: 0x85905800, start-block: 58757128, num_blocks: 1 [0001.010] I> Binary(15) of size 1040 is loaded @ 0x85905800 [0001.015] I> EKB detected (length: 0x400) @ 0x85905800 [0001.021] I> Copied encrypted keys [0001.024] I> boot profiler @ 0x275844000 [0001.028] I> boot profiler for TOS @ 0x275844000 [0001.033] I> Unhalting SCE [0001.036] I> Primary Memory Start:80000000 Size:70000000 [0001.041] I> Extended Memory Start:f0110000 Size:1856f0000 [0001.048] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:17, Jul 26 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 315: key_mgnt_processing ....... hwkey-agent: 223: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete [0001.421] I> Welcome to Cboot [0001.423] I> Cboot Version: t186-00029e71 [0001.427] I> CPU-BL Params @ 0x275800000 [0001.431] I> 0) Base:0x00000000 Size:0x00000000 [0001.435] I> 1) Base:0x277f00000 Size:0x00100000 [0001.440] I> 2) Base:0x277e00000 Size:0x00100000 [0001.444] I> 3) Base:0x277d00000 Size:0x00100000 [0001.449] I> 4) Base:0x277c00000 Size:0x00100000 [0001.453] I> 5) Base:0x277b00000 Size:0x00100000 [0001.458] I> 6) Base:0x277800000 Size:0x00200000 [0001.462] I> 7) Base:0x277400000 Size:0x00400000 [0001.467] I> 8) Base:0x277a00000 Size:0x00100000 [0001.472] I> 9) Base:0x277300000 Size:0x00100000 [0001.476] I> 10) Base:0x276800000 Size:0x00800000 [0001.481] I> 11) Base:0x30000000 Size:0x00040000 [0001.485] I> 12) Base:0xf0000000 Size:0x00100000 [0001.489] I> 13) Base:0x30040000 Size:0x00001000 [0001.494] I> 14) Base:0x30048000 Size:0x00001000 [0001.498] I> 15) Base:0x30049000 Size:0x00001000 [0001.503] I> 16) Base:0x3004a000 Size:0x00001000 [0001.507] I> 17) Base:0x3004b000 Size:0x00001000 [0001.512] I> 18) Base:0x3004c000 Size:0x00001000 [0001.516] I> 19) Base:0x3004d000 Size:0x00001000 [0001.520] I> 20) Base:0x3004e000 Size:0x00001000 [0001.525] I> 21) Base:0x3004f000 Size:0x00001000 [0001.529] I> 22) Base:0x00000000 Size:0x00000000 [0001.534] I> 23) Base:0xf0100000 Size:0x00010000 [0001.538] I> 24) Base:0x00000000 Size:0x00000000 [0001.543] I> 25) Base:0x00000000 Size:0x00000000 [0001.547] I> 26) Base:0x00000000 Size:0x00000000 [0001.551] I> 27) Base:0x00000000 Size:0x00000000 [0001.556] I> 28) Base:0x84400000 Size:0x00400000 [0001.560] I> 29) Base:0x30000000 Size:0x00010000 [0001.565] I> 30) Base:0x278000000 Size:0x08000000 [0001.569] I> 31) Base:0x00000000 Size:0x00000000 [0001.574] I> 32) Base:0x276000000 Size:0x00600000 [0001.578] I> 33) Base:0x80000000 Size:0x70000000 [0001.583] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.587] I> 35) Base:0x00000000 Size:0x00000000 [0001.592] I> 36) Base:0x00000000 Size:0x00000000 [0001.596] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.601] I> 38) Base:0x84000000 Size:0x00400000 [0001.605] I> 39) Base:0x96000000 Size:0x02000000 [0001.609] I> 40) Base:0x85000000 Size:0x01200000 [0001.614] I> 41) Base:0x275800000 Size:0x00500000 [0001.618] I> 42) Base:0x00000000 Size:0x00000000 [0001.623] I> 43) Base:0x00000000 Size:0x00000000 [0001.627] GIC-SPI Target CPU: 4 [0001.630] Interrupts Init done [0001.634] calling constructors [0001.637] initializing heap [0001.640] initializing threads [0001.643] initializing timers [0001.646] creating bootstrap completion thread [0001.651] top of bootstrap2() [0001.654] CPU: ARM Cortex A57 [0001.657] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.662] initializing platform [0001.665] I> Bl_dtb @0x85205400 [0001.668] I> gpio framework initialized [0001.674] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.683] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.690] I> GPIO framework and drivers are initialized. [0001.695] I> Boot-device: eMMC [0001.702] I> sdmmc bdev is already initialized [0001.733] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.751] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.756] W> opt-in fuse is not set, skip fuse_burning [0001.761] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.767] W> No valid slot number is found in scratch register [0001.773] W> Return default slot: _a [0001.782] I> A/B: bin_type (21) slot 0 [0001.786] I> Loading kernel-dtb from partition [0001.790] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.808] I> Kernel_dtb @0x80000000 [0001.811] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.819] E> I2C: slave not found in slaves. [0001.823] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0001.831] E> I2C_DEV: Failed to send register address 0x00000004. [0001.837] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0001.846] E> tca9539_device_init: failed to write polar reg [0001.852] E> tegrabl_tca9539_init: failed to init device! [0001.857] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.864] E> I2C: slave not found in slaves. [0001.868] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false. [0001.875] E> I2C_DEV: Failed to send register address 0x00000004. [0001.881] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0. [0001.891] E> tca9539_device_init: failed to write polar reg [0001.896] E> tegrabl_tca9539_init: failed to init device! [0001.903] I> fixed regulator driver initialized [0001.930] I> register 'maxim' power off handle [0001.935] I> virtual i2c enabled [0001.938] I> registered 'maxim,max77620' pmic [0001.942] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.953] E> failed to read label property for node 224988: 13 [0001.961] E> failed to read reg property for node 225084: 13 [0001.968] E> failed to read reg property for node 225136: 13 [0001.975] E> failed to read label property for node 225220: 13 [0001.982] E> failed to read label property for node 225288: 13 [0001.990] E> failed to read reg property for node 225356: 13 [0001.997] E> failed to read reg property for node 225428: 13 [0002.005] I> Find /i2c@c250000's alias i2c7 [0002.009] I> Reading eeprom i2c=7 address=0x50 [0002.038] I> Device at /i2c@c250000:0x50 [0002.042] I> Reading eeprom i2c=7 address=0x57 [0002.046] E> I2C: slave not found in slaves. [0002.050] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0002.058] E> I2C_DEV: Failed to send register address 0x00000000. [0002.064] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0002.073] E> eeprom: Failed to read I2C slave device [0002.078] I> Eeprom read failed 0x3526070d [0002.083] I> Find /i2c@c240000's alias i2c1 [0002.087] I> Reading eeprom i2c=1 address=0x51 [0002.092] E> I2C: slave not found in slaves. [0002.096] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.104] E> I2C_DEV: Failed to send register address 0x00000000. [0002.110] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.119] E> eeprom: Retry to read I2C slave device. [0002.124] E> I2C: slave not found in slaves. [0002.128] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.136] E> I2C_DEV: Failed to send register address 0x00000000. [0002.142] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.151] E> eeprom: Failed to read I2C slave device [0002.156] I> Eeprom read failed 0x3526070d [0002.161] I> Find /i2c@3160000's alias i2c0 [0002.165] I> Reading eeprom i2c=0 address=0x50 [0002.169] E> I2C: slave not found in slaves. [0002.173] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.181] E> I2C_DEV: Failed to send register address 0x00000000. [0002.187] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0002.196] E> eeprom: Failed to read I2C slave device [0002.201] I> Eeprom read failed 0x3526070d [0002.206] I> Find /i2c@3180000's alias i2c2 [0002.210] I> Reading eeprom i2c=2 address=0x54 [0002.214] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.219] C> GPIO driver for chip_id 0x2 could not be found [0002.224] E> cam_eeprom_read: Can't get gpio driver [0002.229] I> Eeprom read failed 0x4d4d000d [0002.233] I> Reading eeprom i2c=2 address=0x57 [0002.237] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.242] C> GPIO driver for chip_id 0x2 could not be found [0002.247] E> cam_eeprom_read: Can't get gpio driver [0002.252] I> Eeprom read failed 0x4d4d000d [0002.256] I> create_pm_ids: id: 3310-1000-D00-P, len: 15 [0002.261] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.286] I> enabling 'vdd-hdmi' regulator [0002.290] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.298] E> cannot find any other nvdisp nodes [0002.302] E> no valid display unit config found in dtb [0002.308] W> display init failed [0002.311] initializing target [0002.314] calling apps_init() [0002.317] starting app kernel_boot_app [0002.339] I> found decompressor handler: lz4-legacy [0002.344] I> decompressing BMP blob ... [0002.356] I> Kernel type = Normal [0002.359] I> ########## Fixed storage boot ########## [0002.364] I> Loading kernel-bootctrl from partition [0002.368] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0002.382] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0002.389] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0002.396] W> No valid slot number is found in scratch register [0002.402] W> Return default slot: _a [0002.405] I> A/B: bin_type (24) slot 0 [0002.421] I> Boot image size read from image header: 1fdc808 [0002.427] I> Boot image load address: 0x80400000 [0002.431] I> Loading kernel from partition [0002.435] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.377] I> Validate kernel ... [0003.380] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0003.458] I> Decrypt the buffer ... [0003.462] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0003.470] I> done [0003.472] I> Checking boot.img header magic ... [0003.476] I> [OK] [0003.478] I> kernel-dtb is already loaded [0003.482] I> Validate kernel-dtb ... [0003.485] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0003.493] I> Decrypt the buffer ... [0003.496] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0003.505] I> done [0003.507] I> Kernel hdr @0x80400000 [0003.510] I> Kernel dtb @0x80000000 [0003.513] I> decompressor handler not found [0003.517] I> Copying kernel image (33409032 bytes) from 0x80400800 to 0x82600000 ... [0003.538] I> Done [0003.539] I> Move ramdisk (len: 0) from 0x823dd800 to 0x96710000 [0003.547] I> Updated bpmp info to DTB [0003.553] I> Ramdisk: Base: 0x96710000; Size: 0x0 [0003.557] I> Updated initrd info to DTB [0003.561] W> WARN: Fail to override "console=none" in commandline [0003.567] I> Active rootfs suffix: [0003.570] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.577] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.584] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.592] I> disabled_core_mask: 0xffffff0c [0003.596] W> No valid slot number is found in scratch register [0003.601] W> Return default slot: _a [0003.605] I> Active slot suffix: [0003.608] I> add_boot_slot_suffix: slot_suffix = [0003.612] I> Linux Cmdline: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 [0003.660] I> Updated bootarg info to DTB [0003.664] I> eeprom_get_mac_addr: MAC (type: 0): 48:b0:2d:48:5b:ab [0003.670] I> eeprom_get_mac_addr: MAC (type: 1): 48:b0:2d:48:5b:ac [0003.676] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:48:5b:ad [0003.682] E> Found no plugin manager ids in source DT [0003.687] W> Add plugin manager ids from board info [0003.692] W> "plugin-manager" doesn't exist, creating [0003.697] W> "ids" doesn't exist, creating [0003.701] W> "connection" doesn't exist, creating [0003.705] W> "configs" doesn't exist, creating [0003.710] I> create_pm_ids: id: 3310-1000-D00-P, len: 15 [0003.715] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.726] I> Adding plugin-manager/ids/3310-1000-D00=/i2c@c250000:module@0x50 [0003.733] W> "i2c@c250000" doesn't exist, creating [0003.738] W> "module@0x50" doesn't exist, creating [0003.744] I> Adding plugin-manager/ids/3310-1000-D00-P [0003.751] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.756] I> Adding plugin-manager/configs/3310-power-config 00 [0003.762] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.768] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.774] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.780] I> Adding plugin-manager/configs/3310-display-config 00 [0003.786] I> Adding plugin-manager/cvm [0003.790] W> "chip-id" doesn't exist, creating [0003.794] I> Adding plugin-manager/chip-id/A02P [0003.799] W> "odm-data" doesn't exist, creating [0003.804] I> Adding /chosen/plugin-manager/odm-data [0003.813] I> added [base:0x80000000, size:0x70000000] to /memory [0003.819] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.825] I> added [base:0x275e00000, size:0x200000] to /memory [0003.830] I> added [base:0x276600000, size:0x200000] to /memory [0003.836] I> added [base:0x277000000, size:0x200000] to /memory [0003.842] I> Updated memory info to DTB [0003.846] E> add_disp_param: failed to get display params for du=0 [0003.854] W> "reset" doesn't exist, creating [0003.858] W> "pmc-reset-reason" doesn't exist, creating [0003.864] W> "pmic-reset-reason" doesn't exist, creating [0003.870] I> Adding ecid(00000001640221001c00000013fd84c0) to DT [0003.876] I> disabled_core_mask: 0xffffff0c [0003.887] I> Add serial number:1561621034912 as DT property [0003.896] I> Plugin-manager override starting [0003.901] I> node /plugin-manager/fragement@0 matches [0003.912] I> node /plugin-manager/fragement@4 matches [0003.924] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.943] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.952] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.961] I> node /plugin-manager/fragment-devslp@0 matches [0003.972] I> node /plugin-manager/fragment-500-pcie-config matches [0003.986] I> node /plugin-manager/fragment-500-xusb-config matches [0004.008] I> node /plugin-manager/fragment-p3310-c00-comm matches [0004.021] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0004.031] I> node /plugin-manager/fragment-p3310-c01 matches [0004.044] I> node /plugin-manager/fragment-p3310-c03 matches [0004.078] I> Disable plugin-manager status in FDT [0004.083] I> Plugin-manager override finished successfully [0004.088] I> tegrabl_load_kernel_and_dtb: Done [0004.092] E> tegrabl_display_clear: display is not initialized [0004.098] W> Boot logo display failed... [0004.102] I> Kernel EP: 0x82600000, DTB: 0x80000000 [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253 (root@ubuntu-HP-288-Pro-G6-Microtower-PC) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef9002 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 23 pages/cpu s57112 r8192 d28904 u94208 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfsty [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29988(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7286156K/8220672K available (15102K kernel code, 2482K rwdata, 6528K rodata, 8448K init, 617K bss, 180852K reserved, 753664K cma-reserve) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008200000 - 0xffffff80090c0000 ( 15104 KB) [ 0.000000] .rodata : 0xffffff80090c0000 - 0xffffff8009730000 ( 6592 KB) [ 0.000000] .init : 0xffffff8009730000 - 0xffffff8009f70000 ( 8448 KB) [ 0.000000] .data : 0xffffff8009f70000 - 0xffffff800a1dc808 ( 2483 KB) [ 0.000000] .bss : 0xffffff800a1dc808 - 0xffffff800a276eac ( 618 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009527] Console: colour dummy device 80x25 [ 0.014188] console [tty0] enabled [ 0.017744] bootconsole [uart8250] disabled [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253 (root@ubuntu-HP-288-Pro-G6-Microtower-PC) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef9002 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 23 pages/cpu s57112 r8192 d28904 u94208 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfsty [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29988(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7286156K/8220672K available (15102K kernel code, 2482K rwdata, 6528K rodata, 8448K init, 617K bss, 180852K reserved, 753664K cma-reserve) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008200000 - 0xffffff80090c0000 ( 15104 KB) [ 0.000000] .rodata : 0xffffff80090c0000 - 0xffffff8009730000 ( 6592 KB) [ 0.000000] .init : 0xffffff8009730000 - 0xffffff8009f70000 ( 8448 KB) [ 0.000000] .data : 0xffffff8009f70000 - 0xffffff800a1dc808 ( 2483 KB) [ 0.000000] .bss : 0xffffff800a1dc808 - 0xffffff800a276eac ( 618 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009527] Console: colour dummy device 80x25 [ 0.014188] console [tty0] enabled [ 0.017744] bootconsole [uart8250] disabled [ 0.022119] kmemleak: Kernel memory leak detector disabled [ 0.022134] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022149] pid_max: default: 32768 minimum: 301 [ 0.022463] Security Framework initialized [ 0.022625] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022635] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023229] ftrace: allocating 46452 entries in 182 pages [ 0.145526] sched-energy: Sched-energy-costs installed from DT [ 0.145544] ASID allocator initialised with 65536 entries [ 0.183282] tegra-id: chipid=21817. [ 0.183295] tegra-id: opt_subrevision=1. [ 0.183316] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.183329] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.183343] DTB Build time: Nov 11 2022 15:17:12 [ 0.231095] CPU1: Booted secondary processor [4e0f0030] [ 0.262499] CPU2: Booted secondary processor [4e0f0030] [ 0.293493] CPU3: Booted secondary processor [411fd073] [ 0.325466] CPU4: Booted secondary processor [411fd073] [ 0.357467] CPU5: Booted secondary processor [411fd073] [ 0.357521] Brought up 6 CPUs [ 0.357556] SMP: Total of 6 processors activated. [ 0.357569] CPU features: detected feature: 32-bit EL0 Support [ 0.359710] CPU: All CPU(s) started at EL2 [ 0.359914] alternatives: patching kernel code [ 0.362819] devtmpfs: initialized [ 0.396900] Initilizing CustomIPI irq domain [ 0.397064] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.397088] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.405120] pinctrl core: initialized pinctrl subsystem [ 0.405371] OS set in device tree is not L4T. [ 0.405600] regulator-dummy: no parameters [ 0.405748] Initializing plugin-manager [ 0.405814] Plugin module not found [ 0.405860] Plugin-manager status disabled [ 0.407443] NET: Registered protocol family 16 [ 0.408410] pstore: using zlib compression [ 0.408665] console [pstore-1] enabled [ 0.408675] pstore: Registered ramoops as persistent store backend [ 0.408687] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.421504] cpuidle: using governor menu [ 0.423018] bpmp: waiting for handshake [ 0.423033] bpmp: handshake completed [ 0.423058] bpmp: synchronizing channels [ 0.423074] bpmp: channels synchronized [ 0.423085] bpmp: mail init ok [ 0.425159] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.425175] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.425188] arm-smmu 12000000.iommu: stage 1 translation [ 0.425200] arm-smmu 12000000.iommu: stage 2 translation [ 0.425211] arm-smmu 12000000.iommu: nested translation [ 0.425226] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.425244] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.425263] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.425276] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.425288] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.427060] vdso: 2 pages (1 code @ ffffff80090c7000, 1 data @ ffffff8009f74000) [ 0.427091] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.429671] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.431307] Registering BPMP clocks... [ 0.431401] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.432210] Serial: AMBA PL011 UART driver [ 0.433340] tegra_powergate_init: DONE [ 0.433357] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.433381] DTB Build time: Nov 11 2022 15:17:12 [ 0.435245] Tegra reboot handler registered. [ 0.436612] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.436689] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.436712] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.436724] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.436736] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.436892] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.436916] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.437263] iommu: Adding device 3460000.sdhci to group 0 [ 0.437997] iommu: Adding device 3400000.sdhci to group 1 [ 0.439041] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.439064] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.439540] iommu: Adding device 3160000.i2c to group 3 [ 0.439996] iommu: Adding device c240000.i2c to group 4 [ 0.440362] iommu: Adding device 3180000.i2c to group 5 [ 0.440714] iommu: Adding device 3190000.i2c to group 6 [ 0.441142] iommu: Adding device 31b0000.i2c to group 7 [ 0.441525] iommu: Adding device 31c0000.i2c to group 8 [ 0.441882] iommu: Adding device c250000.i2c to group 9 [ 0.442233] iommu: Adding device 31e0000.i2c to group 10 [ 0.443700] iommu: Adding device 3210000.spi to group 11 [ 0.444060] iommu: Adding device c260000.spi to group 12 [ 0.444425] iommu: Adding device 3240000.spi to group 13 [ 0.445148] iommu: Adding device 3100000.serial to group 14 [ 0.445556] iommu: Adding device 3110000.serial to group 15 [ 0.445926] iommu: Adding device c280000.serial to group 16 [ 0.446295] iommu: Adding device 3130000.serial to group 17 [ 0.446670] iommu: Adding device c290000.serial to group 18 [ 0.448092] iommu: Adding device 2490000.ether_qos to group 19 [ 0.448117] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.449015] iommu: Adding device b000000.rtcpu to group 20 [ 0.451333] iommu: Adding device 13e10000.host1x to group 21 [ 0.451651] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.451963] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.452283] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.452598] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.452916] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.453241] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.453579] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.453900] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.454384] iommu: Adding device 150c0000.nvcsi to group 30 [ 0.455059] iommu: Adding device 15700000.vi to group 31 [ 0.455428] iommu: Adding device 15600000.isp to group 32 [ 0.455660] iommu: Adding device 15200000.dc_common to group 33 [ 0.456326] iommu: Adding device 15210000.nvdisplay to group 34 [ 0.456713] iommu: Adding device 15340000.vic to group 35 [ 0.456955] iommu: Adding device 154c0000.nvenc to group 36 [ 0.457216] iommu: Adding device 15480000.nvdec to group 37 [ 0.457618] iommu: Adding device 15380000.nvjpg to group 38 [ 0.457861] iommu: Adding device 15500000.tsec to group 39 [ 0.458101] iommu: Adding device 15100000.tsecb to group 40 [ 0.458824] iommu: Adding device 15810000.se to group 41 [ 0.459051] iommu: Adding device 15820000.se to group 42 [ 0.459282] iommu: Adding device 15830000.se to group 43 [ 0.459508] iommu: Adding device 15840000.se to group 44 [ 0.460404] iommu: Adding device smmu_test to group 45 [ 0.461010] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c10000 [ 0.461034] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c20000 [ 0.461055] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c30000 [ 0.461075] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c40000 [ 0.461094] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c50000 [ 0.461112] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.461129] mc-err: mcerr ops are set to t18x [ 0.461283] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.462473] iommu: Adding device 3530000.xhci to group 46 [ 0.462500] arm-smmu: forcing sodev map for 3530000.xhci [ 0.462961] iommu: Adding device 3550000.xudc to group 47 [ 0.462982] arm-smmu: forcing sodev map for 3550000.xudc [ 0.463690] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.463709] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.463723] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.464381] iommu: Adding device 17000000.gp10b to group 48 [ 0.465461] tegra-reset 5000000.clock: registered 193 resets. [ 0.467825] iommu: Adding device d000000.bpmp to group 49 [ 0.468032] bpmp: ping status is 0 [ 0.468132] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.470398] bpmp d000000.bpmp: probe ok [ 0.473759] iommu: Adding device 2600000.dma to group 50 [ 0.474677] gpio gpiochip0: gpio-line-names specifies 180 line names but there are 192 lines on the chip [ 0.475210] GPIO line 461 (camera-control-output-high) hogged as output/high [ 0.475253] GPIO line 424 (wifi-enable) hogged as output/high [ 0.475293] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.475332] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.475499] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.479244] gpio gpiochip1: gpio-line-names specifies 60 line names but there are 64 lines on the chip [ 0.479379] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.479529] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.481191] iommu: Adding device 10003000.pcie-controller to group 51 [ 0.481220] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.481641] iommu: Adding device sound to group 52 [ 0.482027] iommu: Adding device 3510000.hda to group 53 [ 0.489619] iommu: Adding device c1a0000.aon to group 54 [ 0.490071] vdd-ac-bat: 5000 mV [ 0.491742] vdd-1v8-ap: 1800 mV [ 0.518517] random: fast init done [ 0.521928] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.524647] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.524852] SCSI subsystem initialized [ 0.525140] usbcore: registered new interface driver usbfs [ 0.525186] usbcore: registered new interface driver hub [ 0.525225] usbcore: registered new device driver usb [ 0.536988] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.541734] vddio-ddr: at 1125 mV [ 0.545480] avdd_dsi_csi: 1200 mV [ 0.549503] vdd-1v8: 1800 mV [ 0.553503] vdd-3v3-sys: 3300 mV [ 0.554615] spmic-ldo0: at 1800 mV [ 0.555316] spmic-ldo1: at 800 mV [ 0.557502] vddio-3v3: 3300 mV [ 0.558263] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.561502] vdd-rtc: at 800 mV [ 0.562265] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.565505] spmic-ldo6: at 1500 mV [ 0.569502] vdd-pex-1v00: 1000 mV [ 0.570137] dvdd-pex: 1000 mV [ 0.572357] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.572523] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.572695] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.572888] max77620 4-003c: max77620 probe successful [ 0.573288] media: Linux media interface: v0.10 [ 0.573323] Linux video capture interface: v2.00 [ 0.576990] pps_core: LinuxPPS API ver. 1 registered [ 0.577005] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.577035] PTP clock support registered [ 0.577242] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.577457] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.577518] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.578774] trusty trusty: trusty version: Built: 12:20:14 Jul 26 2021 [ 0.578807] trusty trusty: selected api version: 3 (requested 3) [ 0.579622] Advanced Linux Sound Architecture Driver Initialized. [ 0.579973] Bluetooth: Core ver 2.22 [ 0.580012] NET: Registered protocol family 31 [ 0.580024] Bluetooth: HCI device and connection manager initialized [ 0.580040] Bluetooth: HCI socket layer initialized [ 0.580054] Bluetooth: L2CAP socket layer initialized [ 0.580075] Bluetooth: SCO socket layer initialized [ 0.580593] en-vdd-sd: 3300 mV [ 0.580995] vdd-usb0-5v: 5000 mV [ 0.581328] vdd-usb1-5v: 5000 mV [ 0.581823] vdd-3v3: 3300 mV [ 0.582078] en-vdd-vcm-2v8: 2800 mV [ 0.582326] vdd-sys-bl: 3300 mV [ 0.584379] camchar: rtcpu character device driver loaded [ 0.584927] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.586668] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.587577] clocksource: Switched to clocksource arch_sys_counter [ 0.609737] VFS: Disk quotas dquot_6.6.0 [ 0.609830] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.610079] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.610607] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.610731] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.610746] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.610763] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.610795] nvmap_page_pool_init: Total RAM pages: 2009955 [ 0.610807] nvmap_page_pool_init: nvmap page pool size: 251244 pages (981 MB) [ 0.610861] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.611330] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.613435] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.619268] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.619534] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.619989] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.620080] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.620200] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.620315] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.620482] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.620697] la/ptsa driver initialized. [ 0.620714] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.620726] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.621021] NET: Registered protocol family 2 [ 0.621670] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.621988] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.622588] TCP: Hash tables configured (established 65536 bind 65536) [ 0.622648] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.622773] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.623105] NET: Registered protocol family 1 [ 0.623423] RPC: Registered named UNIX socket transport module. [ 0.623438] RPC: Registered udp transport module. [ 0.623449] RPC: Registered tcp transport module. [ 0.623459] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.623617] Trying to unpack rootfs image as initramfs... [ 0.638948] host1x 13e10000.host1x: initialized [ 0.640215] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.642204] audit: initializing netlink subsys (disabled) [ 0.642243] audit: type=2000 audit(0.520:1): initialized [ 0.642638] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.649187] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.650162] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.650675] 9p: Installing v9fs 9p2000 file system support [ 0.652819] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.652890] io scheduler noop registered [ 0.653101] io scheduler cfq registered (default) [ 0.656398] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.761918] iommu: Adding device aconnect@2a41000:adsp_audio to group 55 [ 0.796468] iommu: Adding device 2993000.adsp to group 56 [ 0.797506] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.799871] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 0.803424] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.804612] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.805681] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.806727] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.809051] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 0.810041] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.810392] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 0.810457] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.810580] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 0.810600] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1000000, vi_iso_bw=1500000, max_bw=3916800 [ 0.812189] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.813468] tsec 15500000.tsec: initialized [ 0.814575] tsec 15100000.tsecb: initialized [ 0.817338] nvdec 15480000.nvdec: initialized [ 0.822338] falcon 15340000.vic: initialized [ 0.823793] falcon 154c0000.nvenc: initialized [ 0.825074] falcon 15380000.nvjpg: initialized [ 0.826889] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.828320] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.829734] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.831216] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.832724] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.834196] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.835767] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.837229] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.840389] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.840412] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.840448] tegradccommon 15200000.dc_common: dma mapping done [ 0.840631] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=392 [ 0.840922] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 0.840981] generic_infoframe_type: 0x87 [ 0.841072] tegradc 15210000.nvdisplay: DT parsed successfully [ 0.841102] tegradc 15210000.nvdisplay: Display dc.ffffff800b3a0000 registered with id=0 [ 0.841312] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 0.846331] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.846350] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.846366] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.846492] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 0.846517] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 0.846599] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 0.846615] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 0.846698] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 0.846712] tegra_cec 3960000.tegra_cec: probed [ 0.847386] tegradc 15210000.nvdisplay: dc_hdmi_hotplug_init: couldn't get regulator vdd_hdmi_5v0, -517 [ 0.850151] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 0.850173] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 0.859193] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 0.859877] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 0.859940] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.860356] kfuse 3830000.kfuse: initialized [ 0.861698] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.864862] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.867323] console [ttyS0] disabled [ 0.867384] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 1.064800] tegradc 15210000.nvdisplay: probed [ 1.236690] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.640774] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.848798] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 1.848801] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.044858] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.046873] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.448966] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.853061] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.158016] console [ttyS0] enabled [ 3.158273] Console: switching to colour frame buffer device 160x64 [ 3.162102] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 3.163002] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 3.163961] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 3.164820] c290000.serial: ttyTHS6 at MMIO 0xc290000 (irq = 40, base_baud = 0) is a TEGRA_UART [ 3.165853] [drm] Initialized [ 3.179054] brd: module loaded [ 3.191391] loop: module loaded [ 3.191434] tegra_profiler: version: 1.145, samples/io: 49/28 [ 3.191527] tegra_profiler: auth: init [ 3.191870] nct1008_nct72 7-004c: starting parse dt [ 3.191968] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 3.191973] nct1008_nct72 7-004c: success parsing dt [ 3.192069] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 3.192406] THERMAL EST: found 3 subdevs [ 3.192409] THERMAL EST num_resources: 0 [ 3.192412] [THERMAL EST subdev 0] [ 3.192415] [THERMAL EST subdev 1] [ 3.192418] [THERMAL EST subdev 2] [ 3.192665] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 3.192666] THERMAL EST: thz register success. [ 3.192763] THERMAL EST: end of probe, return err: 0 [ 3.193354] sd: No Scsi addr parsed to reserve index [ 3.193374] hisi_sas: driver version v1.6 [ 3.196846] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 3.196851] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 3.197540] scsi host0: tegra_ahci [ 3.197885] scsi host1: tegra_ahci [ 3.198016] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 3.198018] ata2: DUMMY [ 3.203163] libphy: Fixed MDIO Bus: probed [ 3.203588] tun: Universal TUN/TAP device driver, 1.6 [ 3.203590] tun: (C) 1999-2004 Max Krasnyansky [ 3.206271] CAN device driver interface [ 3.208180] Message RAM Configuration [ 3.208180] | base addr |0x0c312000| [ 3.208180] | sidfc_flssa |0x00000000| [ 3.208180] | xidfc_flesa |0x00000040| [ 3.208180] | rxf0c_f0sa |0x000000c0| [ 3.208180] | rxf1c_f1sa |0x000009c0| [ 3.208180] | rxbc_rbsa |0x000009c0| [ 3.208180] | txefc_efsa |0x000009c0| [ 3.208180] | txbc_tbsa |0x00000a40| [ 3.208180] | tmc_tmsa |0x00000ec0| [ 3.208352] Release 3.2.0 from 19.12.2014 [ 3.208644] net can0: mttcan device registered (regs=ffffff800a49d000, irq=389) [ 3.210075] Message RAM Configuration [ 3.210075] | base addr |0x0c322000| [ 3.210075] | sidfc_flssa |0x00000000| [ 3.210075] | xidfc_flesa |0x00000040| [ 3.210075] | rxf0c_f0sa |0x000000c0| [ 3.210075] | rxf1c_f1sa |0x000009c0| [ 3.210075] | rxbc_rbsa |0x000009c0| [ 3.210075] | txefc_efsa |0x000009c0| [ 3.210075] | txbc_tbsa |0x00000a40| [ 3.210075] | tmc_tmsa |0x00000ec0| [ 3.210245] Release 3.2.0 from 19.12.2014 [ 3.210518] net can1: mttcan device registered (regs=ffffff800a7ca000, irq=390) [ 3.211095] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.211096] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.211125] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.211126] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.211157] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.211158] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.211189] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 3.211190] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 3.219593] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 3.222013] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 3.222469] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 48 5b ad [ 3.222498] Using phyrst_lpmode = 0 from DT [ 3.222566] libphy: dwc_phy: probed [ 3.222850] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 3.224732] PPP generic driver version 2.4.2 [ 3.224846] PPP BSD Compression module registered [ 3.224848] PPP Deflate Compression module registered [ 3.224860] PPP MPPE Compression module registered [ 3.224863] NET: Registered protocol family 24 [ 3.224905] usbcore: registered new interface driver r8152 [ 3.224935] usbcore: registered new interface driver asix [ 3.224962] usbcore: registered new interface driver ax88179_178a [ 3.224987] usbcore: registered new interface driver cdc_ether [ 3.225013] usbcore: registered new interface driver net1080 [ 3.225041] usbcore: registered new interface driver cdc_subset [ 3.225065] usbcore: registered new interface driver zaurus [ 3.225098] usbcore: registered new interface driver cdc_ncm [ 3.225200] VFIO - User Level meta-driver version: 0.3 [ 3.225984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.225993] ehci-pci: EHCI PCI platform driver [ 3.226021] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.226026] ohci-pci: OHCI PCI platform driver [ 3.226053] ohci-platform: OHCI generic platform driver [ 3.227889] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 3.228243] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 3.231026] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 3.232649] tegra-xusb 3530000.xhci: extcon 0: ffffffc1eb338800 id [ 3.232711] tegra-xusb 3530000.xhci: Direct firmware load for tegra18x_xusb_firmware failed with error -2 [ 3.232714] tegra-xusb 3530000.xhci: Falling back to user helper [ 3.233169] usbcore: registered new interface driver uas [ 3.233204] usbcore: registered new interface driver usb-storage [ 3.233270] usbcore: registered new interface driver usbserial [ 3.237363] tegra-xudc-new 3550000.xudc: device count: 1 [ 3.238416] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 3.257502] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.259497] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.263798] nct1008_nct72 7-004c: initial LOC temp: 42000 [ 3.264098] nct1008_nct72 7-004c: initial EXT temp: 56500 [ 3.264696] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 3.264978] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 3.265159] nct1008_nct72 7-004c: nct1008_probe: initialized [ 3.367698] tegra-usb-cd usb_cd: notification status (0x0, 0x1) [ 3.367701] tegra-usb-cd usb_cd: connected to SDP [ 3.367710] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 3.367872] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 3.368410] mousedev: PS/2 mouse device common for all mice [ 3.368461] usbcore: registered new interface driver xpad [ 3.463922] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.464279] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.496971] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.497894] Wake73 for irq=42 [ 3.499121] rtc rtc1: alarm rtc device [ 3.499130] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 3.499150] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.499319] i2c /dev entries driver [ 3.500283] ov9281 2-0060: probing v4l2 sensor. [ 3.500428] ov9281 2-0060: henry debug ov9281_probe() line==1183 [ 3.500431] ov9281 2-0060: Resetting ov9281 sensor [ 3.510949] ov9281 2-0060: henry debug camera_common_initialize() line==1017 [ 3.510957] ov9281 2-0060: camera_common_parse_ports: port 0 num of lanes 2 [ 3.510991] extract_pixel_format: henry debug formatyuv_grey8 [ 3.511016] ov9281 2-0060: ov9281_probe: name ov9281_a [ 3.511019] ov9281 2-0060: ov9281_probe: name ov9281_a [ 3.511021] ov9281 2-0060: camera_common_create_debugfs ov9281_a [ 3.511031] ov9281 2-0060: henry debug ov9281_probe();line==1239;csi_port==0 [ 3.511036] ov9281 2-0060: henry debug ov9281_probe();line==1243;sub device name==ov9281 2-0060 [ 3.511039] ov9281 2-0060: henry debug ov9281_probe();line==1244 [ 3.511041] ov9281 2-0060: ov9281_ctrls_init++ [ 3.511059] ov9281 2-0060: henry debug ov9281_probe();line==1249 [ 3.511067] ov9281 2-0060: camera_common_mclk_enable: enable MCLK with 26000000 Hz [ 3.511097] ov9281 2-0060: camera_common_dpd_disable: csi 0 [ 3.511100] ov9281 2-0060: ov9281_power_on: power on [ 3.516479] ov9281 2-0060: Using default I2C address 0x60 [ 3.516482] ov9281 2-0060: henry debug ov9281_probe();line==1254 [ 3.516994] ov9281 2-0060: henry debug ov9281_probe();line==1259 [ 3.575509] ov9281 2-0060: henry debug ov9281_probe();line==1286 [ 3.575512] ov9281 2-0060: Probed v4l2 sensor. [ 3.575518] ov9281 2-0060: ov9281_power_off: power off [ 3.575682] ov9281 2-0060: camera_common_dpd_enable: csi 0 [ 3.575686] ov9281 2-0060: camera_common_mclk_disable: disable MCLK [ 3.575727] ov9281 2-0010: probing v4l2 sensor. [ 3.575847] ov9281 2-0010: henry debug ov9281_probe() line==1183 [ 3.575850] ov9281 2-0010: Resetting ov9281 sensor [ 3.586374] ov9281 2-0010: henry debug camera_common_initialize() line==1017 [ 3.586381] ov9281 2-0010: camera_common_parse_ports: port 1 num of lanes 2 [ 3.586408] extract_pixel_format: henry debug formatyuv_grey8 [ 3.586432] ov9281 2-0010: ov9281_probe: name ov9281_b [ 3.586434] ov9281 2-0010: ov9281_probe: name ov9281_b [ 3.586437] ov9281 2-0010: camera_common_create_debugfs ov9281_b [ 3.586447] ov9281 2-0010: henry debug ov9281_probe();line==1239;csi_port==1 [ 3.586452] ov9281 2-0010: henry debug ov9281_probe();line==1243;sub device name==ov9281 2-0010 [ 3.586454] ov9281 2-0010: henry debug ov9281_probe();line==1244 [ 3.586457] ov9281 2-0010: ov9281_ctrls_init++ [ 3.586470] ov9281 2-0010: henry debug ov9281_probe();line==1249 [ 3.586476] ov9281 2-0010: camera_common_mclk_enable: enable MCLK with 26000000 Hz [ 3.586506] ov9281 2-0010: camera_common_dpd_disable: csi 1 [ 3.586509] ov9281 2-0010: ov9281_power_on: power on [ 3.591888] ov9281 2-0010: Using default I2C address 0x10 [ 3.591890] ov9281 2-0010: henry debug ov9281_probe();line==1254 [ 3.592228] ov9281 2-0010: henry debug ov9281_probe();line==1259 [ 3.651505] ov9281 2-0010: henry debug ov9281_probe();line==1286 [ 3.651508] ov9281 2-0010: Probed v4l2 sensor. [ 3.651513] ov9281 2-0010: ov9281_power_off: power off [ 3.651673] ov9281 2-0010: camera_common_dpd_enable: csi 1 [ 3.651676] ov9281 2-0010: camera_common_mclk_disable: disable MCLK [ 3.652281] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.657017] parse_throttle_dt_data: Num cap clks = 4 [ 3.657020] parse_throttle_dt_data: clk=mcpu type=1 [ 3.657022] parse_throttle_dt_data: clk=bcpu type=2 [ 3.657028] parse_throttle_dt_data: clk=gpu type=4 [ 3.657030] parse_throttle_dt_data: clk=emc type=3 [ 3.657793] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.658296] FAN: coudln't get the regulator [ 3.658762] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 3.659706] device-mapper: uevent: version 1.0.3 [ 3.660051] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.660314] CPU EMC frequency mapping table: from device tree [ 3.666667] cpufreq: platform driver Initialization: pass [ 3.667912] cpuidle: Initializing cpuidle driver init for Denver cluster [ 3.668038] cpuidle: Initializing cpuidle driver init for A57 cluster [ 3.673714] sdhci: Secure Digital Host Controller Interface driver [ 3.673715] sdhci: Copyright(c) Pierre Ossman [ 3.673716] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.674904] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 3.676672] CMDQ: cmdq_platfm_init successful [ 3.677633] CQE: CMD_TIMING bit set for R1B DCMD [ 3.680118] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 3.685658] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 3.685708] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 3.687371] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 3.689080] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 259 [ 3.703517] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.703644] ata1.00: ATA-10: FORESEE 64GB SSD, V4.6, max UDMA/133 [ 3.703647] ata1.00: 125045424 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.703781] ata1.00: configured for UDMA/133 [ 3.723491] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.731507] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.739547] gpio tegra-gpio wake71 for gpio=125(P:5) [ 3.739588] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.765192] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 3.779229] mmc0: periodic cache flush enabled [ 3.779234] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 3.779558] mmcblk0: mmc0:0001 DG4032 29.1 GiB [ 3.783670] mmcblk0boot0: mmc0:0001 DG4032 partition 1 4.00 MiB [ 3.787779] mmcblk0boot1: mmc0:0001 DG4032 partition 2 4.00 MiB [ 3.791880] mmcblk0rpmb: mmc0:0001 DG4032 partition 3 4.00 MiB [ 3.796525] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 3.976292] mmc1: Applying tuning correction [ 3.976304] mmc1: Tap value after applying correction 59 [ 3.976310] mmc1: hw tuning done ... [ 3.979704] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 4.381129] tegradc 15210000.nvdisplay: fb registered [ 4.386400] gpio tegra-gpio wake21 for gpio=121(P:1) [ 4.392241] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4.398351] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4.404439] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 4.411768] Parent Clock set for DC plld2 [ 4.419370] tegradc 15210000.nvdisplay: hdmi: tmds rate:107964K prod-setting:prod_c_hdmi_54m_111m [ 4.429480] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 4.471236] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4.478458] Extcon AUX1(HDMI) enable [ 4.482552] scsi 0:0:0:0: Direct-Access ATA FORESEE 64GB SSD V4.6 PQ: 0 ANSI: 5 [ 4.491009] tegra-se-nvhost 15810000.se: initialized [ 4.497101] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 4.503787] tegra-se-nvhost 15820000.se: initialized [ 4.509669] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 4.516359] tegra-se-nvhost 15830000.se: initialized [ 4.522096] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 4.528743] tegra-se-nvhost 15840000.se: initialized [ 4.531761] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 4.531896] sd 0:0:0:0: [sda] Write Protect is off [ 4.531944] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.532732] sda: sda1 [ 4.533216] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.563062] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 4.569982] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.576561] hidraw: raw HID events driver (C) Jiri Kosina [ 4.582770] usbcore: registered new interface driver usbhid [ 4.588355] usbhid: USB HID core driver [ 4.597790] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 4.608183] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 4.616405] tegradc 15210000.nvdisplay: blank - powerdown [ 4.616648] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.616766] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 4.616957] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 4.623930] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 4.624004] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 4.624057] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 4.624105] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 4.624202] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 4.624514] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (53) [ 4.624516] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 4.624970] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 4.626514] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.626932] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.627303] register_ari_mca_banks: Registered MCA ROC:IOB [ 4.627606] register_ari_mca_banks: Registered MCA ROC:CCE [ 4.628293] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.628295] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 4.628297] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 4.628353] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.628355] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 4.628356] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 4.628413] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.628414] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 4.628416] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 4.628463] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.628464] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 4.628466] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 4.628514] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.628515] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 4.628517] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 4.628564] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.628568] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 4.628570] tegra18-bridge 2100000.axip2p: bridge probed OK [ 4.628617] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.628621] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 4.628623] tegra18-bridge 2110000.axip2p: bridge probed OK [ 4.628670] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.628673] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 4.628675] tegra18-bridge 2120000.axip2p: bridge probed OK [ 4.628721] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.628725] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 4.628727] tegra18-bridge 2130000.axip2p: bridge probed OK [ 4.628783] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.628785] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 4.628786] tegra18-bridge 2140000.axip2p: bridge probed OK [ 4.628834] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.628838] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 4.628840] tegra18-bridge 2150000.axip2p: bridge probed OK [ 4.628887] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.628891] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 4.628893] tegra18-bridge 2160000.axip2p: bridge probed OK [ 4.628939] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.628944] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 4.628945] tegra18-bridge 2170000.axip2p: bridge probed OK [ 4.628993] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.628998] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 4.628999] tegra18-bridge 2180000.axip2p: bridge probed OK [ 4.629046] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.629049] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 4.629051] tegra18-bridge 2190000.axip2p: bridge probed OK [ 4.629109] **** A57 ECC: Enabled [ 4.629110] tegra18_a57_serr_init: on CPU 5 a A57 Core [ 4.629173] tegra18x_actmon d230000.actmon: in actmon_register()... [ 4.629620] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 4.630026] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 4.630142] denver_knobs_init:MTS_VERSION:53679346 [ 4.631974] nvpmodel: initialized successfully [ 4.632813] trusty-virtio trusty:virtio: initializing [ 4.632902] trusty_ipc virtio0: vring0: va(pa) ffffffc1e9f98000(0) qsz 32 notifyid 1 [ 4.632907] trusty_ipc virtio0: vring1: va(pa) ffffffc1e9f9a000(0) qsz 32 notifyid 2 [ 4.632967] trusty-virtio trusty:virtio: initializing done [ 4.633067] trusty_ipc virtio0: is online [ 4.634366] usbcore: registered new interface driver snd-usb-audio [ 4.648665] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 4.648796] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 4.657696] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 4.657698] Extcon AUX1(HDMI) disable [ 4.662437] OPE platform probe [ 4.662495] OPE platform probe successful [ 4.674836] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 4.674911] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 4.675465] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 4.686618] tegradc 15210000.nvdisplay: unblank [ 4.687414] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4.687500] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4.687581] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 4.688825] Parent Clock set for DC plld2 [ 4.692104] tegradc 15210000.nvdisplay: hdmi: tmds rate:108000K prod-setting:prod_c_hdmi_54m_111m [ 4.693326] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 4.728474] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4.728475] Extcon AUX1(HDMI) enable [ 4.742305] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 4.742371] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 4.742440] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 4.742502] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 4.742567] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 4.742634] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 4.742699] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 4.742764] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 4.742827] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 4.742891] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 4.742962] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 4.743031] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 4.743094] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 4.743160] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 4.743223] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 4.743288] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 4.743354] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 4.743420] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 4.743422] tegradc 15210000.nvdisplay: sync windows ret = 247 [ 4.743507] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 4.743575] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 4.902507] input: tegra-snd-t186ref-mobile-rt565x Headset Jack as /devices/sound/sound/card1/input2 [ 4.903382] u32 classifier [ 4.903383] Actions configured [ 4.903441] Initializing XFRM netlink socket [ 4.904010] NET: Registered protocol family 10 [ 4.904663] NET: Registered protocol family 17 [ 4.904671] NET: Registered protocol family 15 [ 4.904728] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.904730] can: controller area network core (rev 20120528 abi 9) [ 4.904794] NET: Registered protocol family 29 [ 4.904805] can: raw protocol (rev 20120528) [ 4.904856] Bluetooth: RFCOMM socket layer initialized [ 4.904864] Bluetooth: RFCOMM ver 1.11 [ 4.904867] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.904871] Bluetooth: HIDP socket layer initialized [ 4.904886] 9pnet: Installing 9P2000 support [ 4.904915] Key type dns_resolver registered [ 4.906967] Registered cp15_barrier emulation handler [ 4.906979] Registered setend emulation handler [ 4.908153] registered taskstats version 1 [ 5.798838] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 5.807075] Extcon HDMI: HPD enabled [ 5.811668] tegradc 15210000.nvdisplay: hdmi: plugged [ 5.818615] isp 15600000.isp: initialized [ 5.827876] nvcsi 150c0000.nvcsi: initialized [ 5.834720] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 5.839112] Wake83 for irq=51 [ 5.839187] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 5.839262] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 5.839336] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 5.839468] input: gpio-keys as /devices/gpio-keys/input/input3 [ 5.873043] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 02:06:23 UTC (946692383) [ 5.874779] tegra-vi4 15700000.vi: initialized [ 5.875669] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound [ 5.875683] tegra-vi4 15700000.vi: subdev ov9281 2-0060 bound [ 5.882828] ov9281 2-0060: camera_common_g_fmt++ [ 5.883118] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 5.883122] tegra-vi4 15700000.vi: subdev ov9281 2-0010 bound [ 5.883250] ov9281 2-0010: camera_common_g_fmt++ [ 5.928509] mmcblk mmc0:0001: Card claimed for testing. [ 5.962766] bpmp: mounted debugfs mirror [ 5.968879] bwmgr: missing cdev-type property [ 5.980052] ALSA device list: [ 5.984046] #0: tegra-hda at 0x3518000 irq 385 [ 5.989695] #1: tegra-snd-t186ref-mobile-rt565x [ 6.466577] EXT4-fs (mmcblk0p1): 12 orphan inodes deleted [ 6.473086] EXT4-fs (mmcblk0p1): recovery complete [ 6.484061] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 6.493278] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 6.501890] devtmpfs: mounted [ 6.508229] Freeing unused kernel memory: 8448K [ 6.585191] systemd[1]: System time before build time, advancing clock. [ 6.619302] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.634537] cgroup: cgroup2: unknown option "nsdelegate" [ 6.646163] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL ) [ 6.672164] systemd[1]: Detected architecture arm64. [ 6.700914] systemd[1]: Set hostname to . [ 6.778922] random: crng init done [ 6.789499] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not su. [ 6.809876] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 6.930566] systemd[1]: Created slice System Slice. [ 6.939206] systemd[1]: Listening on Journal Audit Socket. [ 6.948332] systemd[1]: Listening on Syslog Socket. [ 6.957984] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.970747] systemd[1]: Listening on udev Kernel Socket. [ 7.059072] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 7.187881] systemd-journald[2143]: Received request to flush runtime journal from PID 1 [ 7.903626] using random self ethernet address [ 7.909363] using random host ethernet address [ 8.277429] ov9281 2-0010: camera_common_mclk_enable: enable MCLK with 26000000 Hz [ 8.298558] ov9281 2-0060: camera_common_mclk_enable: enable MCLK with 26000000 Hz [ 8.298935] ov9281 2-0060: camera_common_dpd_disable: csi 0 [ 8.298938] ov9281 2-0060: ov9281_power_on: power on [ 8.312032] ov9281 2-0060: ov9281_power_off: power off [ 8.313104] ov9281 2-0060: camera_common_dpd_enable: csi 0 [ 8.313107] ov9281 2-0060: camera_common_mclk_disable: disable MCLK [ 8.412962] ov9281 2-0010: camera_common_dpd_disable: csi 1 [ 8.432151] using random self ethernet address [ 8.432153] using random host ethernet address [ 8.533345] ov9281 2-0010: ov9281_power_on: power on [ 8.547174] ov9281 2-0010: ov9281_power_off: power off [ 8.559749] ov9281 2-0010: camera_common_dpd_enable: csi 1 [ 8.559752] ov9281 2-0010: camera_common_mclk_disable: disable MCLK [ 9.087784] mttcan c310000.mttcan can0: bit-timing not yet defined [ 9.133930] mttcan c310000.mttcan can0: failed to open can device [ 9.149683] mttcan c320000.mttcan can1: bit-timing not yet defined [ 9.149685] mttcan c320000.mttcan can1: failed to open can device [ 9.269164] CPU1: shutdown [ 9.315693] CPU2: shutdown [ 10.376852] Bridge firewalling registered Ubuntu 18.04.5 LTS u-desktop ttyS0 [END] 2022/11/11 16:35:40