nvidia@ubuntu:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5494-d8000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Apr 20 14:25:12 PDT 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00140000@92cb4000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 gpt tegra_fbmem=0x140000@0x92cb4000 is_hdmi_initialised=1 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 nv-auto-config quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 nv-auto-config [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29664(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3567192K/4159488K available (15358K kernel code, 2956K rwdata, 6696K rodata, 8640K init, 612K bss, 117160K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001690] Console: colour dummy device 80x25 [ 0.001700] console [tty0] enabled [ 0.001706] bootconsole [uart8250] disabled [ 0.001724] kmemleak: Kernel memory leak detector disabled [ 0.001744] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001757] pid_max: default: 32768 minimum: 301 [ 0.002207] Security Framework initialized [ 0.002429] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002437] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003555] ftrace: allocating 47098 entries in 184 pages [ 0.171777] sched-energy: CPU device node has no sched-energy-costs [ 0.171809] ASID allocator initialised with 65536 entries [ 0.207921] tegra-id: chipid=22117. [ 0.207934] tegra-id: opt_subrevision=0. [ 0.207952] Tegra Speedo/IDDQ fuse revision 4 [ 0.207958] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.207963] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.207970] Tegra: CPU Speedo Value 2078, SoC Speedo Value 1979, GPU Speedo Value 2088 [ 0.207974] Tegra: CPU IDDQ Value 2068, SoC IDDQ Value 2268, GPU IDDQ Value 2965 [ 0.207994] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.208010] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.208017] DTB Build time: Apr 20 2022 14:28:59 [ 0.257081] CPU1: Booted secondary processor [411fd071] [ 0.288988] CPU2: Booted secondary processor [411fd071] [ 0.320969] CPU3: Booted secondary processor [411fd071] [ 0.321063] Brought up 4 CPUs [ 0.321070] SMP: Total of 4 processors activated. [ 0.321077] CPU features: detected feature: 32-bit EL0 Support [ 0.321339] CPU: All CPU(s) started at EL2 [ 0.321356] alternatives: patching kernel code [ 0.329489] devtmpfs: initialized [ 0.367517] Initilizing CustomIPI irq domain [ 0.367828] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.367848] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.378570] pinctrl core: initialized pinctrl subsystem [ 0.379157] OS set in device tree is not L4T. [ 0.379583] regulator-dummy: no parameters [ 0.379850] Initializing plugin-manager [ 0.380006] Plugin module not found [ 0.380207] node /plugin-manager/fragement@0 match with board >=3448-0002-100 [ 0.380719] node /plugin-manager/fragment@1 match with board >=3448-0002-101 [ 0.381192] node /plugin-manager/fragment@3 match with board >=3448-0002-100 [ 0.381936] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.382143] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.382760] node /plugin-manager/fragement@13 match with board >=3448-0002-300 [ 0.386341] NET: Registered protocol family 16 [ 0.391292] pstore: using zlib compression [ 0.391334] console [pstore-1] enabled [ 0.391338] pstore: Registered ramoops as persistent store backend [ 0.391344] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.405120] cpuidle: using governor menu [ 0.409450] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.411224] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.411248] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.413599] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.415940] Serial: AMBA PL011 UART driver [ 0.416448] tegra_powergate_init: DONE [ 0.416464] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.416471] DTB Build time: Apr 20 2022 14:28:59 [ 0.418409] Tegra reboot handler registered. [ 0.422931] iommu: Adding device tegra-carveouts to group 0 [ 0.423067] platform tegra-carveouts: domain=ffffffc0f943f3d8 allocates as[0]=ffffffc0f94300a8 [ 0.423421] iommu: Adding device smmu_test to group 1 [ 0.423472] platform smmu_test: domain=ffffffc0f943f618 allocates as[0]=ffffffc0f9430110 [ 0.424276] mc: mapped MMIO address: 0xffffff8008041000 -> 0x70019000 [ 0.424331] mc: mapped MMIO address: 0xffffff8008067000 -> 0x7001c000 [ 0.424396] mc: mapped MMIO address: 0xffffff800807b000 -> 0x7001d000 [ 0.424405] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.424430] mc-err: mcerr ops are set to t21x [ 0.435116] iommu: Adding device 70090000.xusb to group 2 [ 0.435395] iommu: Adding device 70006000.serial to group 3 [ 0.435469] platform 70006000.serial: domain=ffffffc0f94f0558 allocates as[0]=ffffffc0f9430178 [ 0.435887] iommu: Adding device 70006040.serial to group 4 [ 0.436169] iommu: Adding device 70006200.serial to group 5 [ 0.436398] iommu: Adding device sound to group 6 [ 0.436449] platform sound: domain=ffffffc0f94f0a98 allocates as[0]=ffffffc0f94301e0 [ 0.437064] iommu: Adding device 7000d400.spi to group 7 [ 0.437339] iommu: Adding device 7000d600.spi to group 8 [ 0.437683] iommu: Adding device 50000000.host1x to group 9 [ 0.437954] iommu: Adding device 54080000.vi to group 10 [ 0.438349] iommu: Adding device 54600000.isp to group 11 [ 0.438612] iommu: Adding device 54680000.isp to group 12 [ 0.438917] iommu: Adding device tegradc.0 to group 13 [ 0.438967] platform tegradc.0: domain=ffffffc0f94fa858 allocates as[0]=ffffffc0f9430248 [ 0.440356] platform tegradc.0: IOVA linear map 0x0000000092cb4000(140000) [ 0.440749] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.441122] iommu: Adding device tegradc.1 to group 14 [ 0.441177] platform tegradc.1: domain=ffffffc0f94faa98 allocates as[0]=ffffffc0f94302b0 [ 0.442561] platform tegradc.1: IOVA linear map 0x0000000092cb4000(140000) [ 0.442951] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.443190] iommu: Adding device 54340000.vic to group 15 [ 0.443399] iommu: Adding device 544c0000.nvenc to group 16 [ 0.443588] iommu: Adding device 54500000.tsec to group 17 [ 0.443798] iommu: Adding device 54100000.tsecb to group 18 [ 0.444002] iommu: Adding device 54480000.nvdec to group 19 [ 0.444212] iommu: Adding device 54380000.nvjpg to group 20 [ 0.445351] iommu: Adding device 546c0000.i2c to group 21 [ 0.445677] iommu: Adding device 57000000.gpu to group 22 [ 0.445729] platform 57000000.gpu: domain=ffffffc0f9507a98 allocates as[0]=ffffffc0f9430318 [ 0.445766] platform 57000000.gpu: domain=ffffffc0f9507a98 allocates as[1]=ffffffc0f9430380 [ 0.445801] platform 57000000.gpu: domain=ffffffc0f9507a98 allocates as[2]=ffffffc0f94303e8 [ 0.445842] platform 57000000.gpu: domain=ffffffc0f9507a98 allocates as[3]=ffffffc0f9430450 [ 0.446705] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.446714] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.446726] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.446731] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.446736] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.497167] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.497177] tegra-pmc: Clear bootloader IO dpd settings [ 0.497199] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.497264] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.497557] iommu: Adding device 70012000.se to group 23 [ 0.498155] iommu: Adding device 1003000.pcie to group 24 [ 0.498208] platform 1003000.pcie: domain=ffffffc0f959c258 allocates as[0]=ffffffc0f94304b8 [ 0.498640] iommu: Adding device 7000c000.i2c to group 25 [ 0.498953] iommu: Adding device 7000c400.i2c to group 26 [ 0.499205] iommu: Adding device 7000c500.i2c to group 27 [ 0.499457] iommu: Adding device 7000c700.i2c to group 28 [ 0.499706] iommu: Adding device 7000d000.i2c to group 29 [ 0.499960] iommu: Adding device 7000d100.i2c to group 30 [ 0.500232] iommu: Adding device sdhci-tegra.3 to group 31 [ 0.500281] platform sdhci-tegra.3: domain=ffffffc0f959cd98 allocates as[0]=ffffffc0f9430520 [ 0.501143] iommu: Adding device 700d0000.xudc to group 32 [ 0.504402] vdd-ac-bat: 5000 mV [ 0.504805] vdd-5v0-sys: 5000 mV [ 0.505516] vdd-5v0-hdmi: 5000 mV [ 0.505948] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.506195] vdd-1v8-sys: 1800 mV [ 0.506568] vdd-fan: 5000 mV [ 0.506817] vdd-fan: supplied by vdd-5v0-sys [ 0.507050] vdd-usb-vbus: 5000 mV [ 0.507250] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.507581] vdd-usb-vbus2: 5000 mV [ 0.538302] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.540526] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.541857] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.541887] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.541906] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.542251] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.550310] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.550661] SCSI subsystem initialized [ 0.550835] libata version 3.00 loaded. [ 0.551141] usbcore: registered new interface driver usbfs [ 0.551191] usbcore: registered new interface driver hub [ 0.551237] usbcore: registered new device driver usb [ 0.555276] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.560349] vdd-core: 600 <--> 1162 mV at 1075 mV [ 0.561420] random: fast init done [ 0.561429] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.564995] vdd-ddr-1v1: 1150 mV [ 0.568985] vdd-pre-reg-1v35: 1350 mV [ 0.572984] vdd-1v8: 1800 mV [ 0.576985] avdd-sys-1v2: 1200 mV [ 0.580983] vdd-pex-1v0: 1050 mV [ 0.581632] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.582167] max77620-ldo3: at 3100 mV [ 0.584986] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.585510] max77620-ldo5: at 3100 mV [ 0.588985] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.592984] avdd-1v05-pll: 1050 mV [ 0.596982] avdd-io-hdmi-dp: 1050 mV [ 0.599488] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.599787] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.600078] max77620 4-003c: max77620 probe successful [ 0.602672] media: Linux media interface: v0.10 [ 0.602738] Linux video capture interface: v2.00 [ 0.603739] pps_core: LinuxPPS API ver. 1 registered [ 0.603747] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.603773] PTP clock support registered [ 0.607118] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.607912] Advanced Linux Sound Architecture Driver Initialized. [ 0.608554] Bluetooth: Core ver 2.22 [ 0.608620] NET: Registered protocol family 31 [ 0.608625] Bluetooth: HCI device and connection manager initialized [ 0.608639] Bluetooth: HCI socket layer initialized [ 0.608648] Bluetooth: L2CAP socket layer initialized [ 0.608675] Bluetooth: SCO socket layer initialized [ 0.610362] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.610376] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.610419] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.610433] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.613681] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.614862] vdd-3v3-sys: 3300 mV [ 0.615222] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.615274] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.617151] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.617589] vdd-3v3-sd: 3300 mV [ 0.617977] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.618472] avdd-io-edp-1v05: 1050 mV [ 0.618821] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.618986] vdd-usb-hub-en: 5000 mV [ 0.619345] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.620415] camchar: rtcpu character device driver loaded [ 0.621207] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1 [ 0.622657] clocksource: Switched to clocksource arch_sys_counter [ 0.663079] VFS: Disk quotas dquot_6.6.0 [ 0.663207] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.663689] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.664134] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.664150] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.664347] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.664353] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.664364] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.664398] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.664404] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.664418] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.664426] nvmap_page_pool_init: Total RAM pages: 1010582 [ 0.664432] nvmap_page_pool_init: nvmap page pool size: 126322 pages (493 MB) [ 0.664533] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.664942] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.665663] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.675579] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.676050] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.676412] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.676693] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.676871] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.677129] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.677133] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.677561] NET: Registered protocol family 2 [ 0.677686] IP idents hash table entries: 65536 (order: 7, 524288 bytes) [ 0.680018] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.680229] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.680743] TCP: Hash tables configured (established 32768 bind 32768) [ 0.680894] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.680974] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.681393] NET: Registered protocol family 1 [ 0.682111] RPC: Registered named UNIX socket transport module. [ 0.682116] RPC: Registered udp transport module. [ 0.682120] RPC: Registered tcp transport module. [ 0.682124] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.682138] PCI: CLS 0 bytes, default 64 [ 0.682390] Trying to unpack rootfs image as initramfs... [ 0.980102] Freeing initrd memory: 6992K [ 0.989877] host1x 50000000.host1x: initialized [ 0.991878] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.995262] audit: initializing netlink subsys (disabled) [ 0.995333] audit: type=2000 audit(0.847:1): initialized [ 0.996001] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.005861] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.007347] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.008120] 9p: Installing v9fs 9p2000 file system support [ 1.011311] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.011420] io scheduler noop registered [ 1.011729] io scheduler cfq registered (default) [ 1.014429] gic 702f9000.agic: GIC IRQ controller registered [ 1.017262] iommu: Adding device 702ef000.adsp to group 33 [ 1.026393] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 1.026552] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.027184] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x8987c10 [ 1.027193] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.028850] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.028957] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.029054] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.029241] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.029335] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.029428] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.029514] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.029605] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.029693] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.029784] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.036173] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.037878] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.039854] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.041150] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.041504] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.042796] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.042937] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.043155] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.043423] Adding domain tsec-pd to PM domain host1x-pd [ 1.046689] tsec 54500000.tsec: initialized [ 1.048088] tsec 54100000.tsecb: initialized [ 1.048812] Adding domain nvdec-pd to PM domain host1x-pd [ 1.052312] nvdec 54480000.nvdec: initialized [ 1.053425] Adding domain vic03-pd to PM domain host1x-pd [ 1.053613] Adding domain msenc-pd to PM domain host1x-pd [ 1.053784] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.058027] falcon 54340000.vic: initialized [ 1.059426] falcon 544c0000.nvenc: initialized [ 1.060823] falcon 54380000.nvjpg: initialized [ 1.065381] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=96 [ 1.065430] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.065465] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.065510] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.065602] display board info: id 0x0, fab 0x0 [ 1.065658] generic_infoframe_type: 0x87 [ 1.065747] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.065752] tegra_cec 70015000.tegra_cec: probed [ 1.065808] tegradc tegradc.0: DT parsed successfully [ 1.065868] tegradc tegradc.0: Display dc.ffffff800abc0000 registered with id=0 [ 1.066430] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 640x480 (on 0x0mm) pclk=25173906 [ 1.069914] tegradc tegradc.0: probed [ 1.074588] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 1.074597] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.074603] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 1.074609] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 1.074615] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.074654] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400 [ 1.074731] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.074940] iommu: Adding device 0000:00:01.0 to group 35 [ 1.075024] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 1.075095] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.075282] iommu: Adding device 0000:00:02.0 to group 36 [ 1.075357] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.075367] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.075498] pci 0000:01:00.0: [12d8:2608] type 01 class 0x060400 [ 1.075642] pci 0000:01:00.0: supports D1 D2 [ 1.075646] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.075855] iommu: Adding device 0000:01:00.0 to group 37 [ 1.076506] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.081048] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.081485] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.081491] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.081719] kfuse 7000fc00.kfuse: initialized [ 1.082342] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.083059] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.083715] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.083722] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.084024] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.085065] vdd-gpu: applied init 1000000uV constraint [ 1.085070] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.085284] Console: switching to colour frame buffer device 80x30 [ 1.085310] tegradc tegradc.0: fb registered [ 1.085431] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.088353] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.088431] No Device Node present for smmu client: serial8250 !! [ 1.088438] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.088461] iommu: Adding device serial8250 to group 38 [ 1.090049] console [ttyS0] disabled [ 1.090097] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.090139] console [ttyS0] enabled [ 1.091007] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.091238] serial-tegra 70006200.serial: RX in PIO mode [ 1.091280] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 1.091310] tegradc tegradc.0: hdmi: tmds rate:25174K prod-setting:prod_c_hdmi_0m_54m [ 1.091325] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.091670] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 1.091681] tegradc tegradc.0: hdmi: BL set VIC 0 [ 1.091685] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 1.092055] pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.092213] pci 0000:02:01.0: [12d8:2608] type 01 class 0x060400 [ 1.092244] [drm] Initialized [ 1.092358] pci 0000:02:01.0: supports D1 D2 [ 1.092363] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.092584] iommu: Adding device 0000:02:01.0 to group 39 [ 1.092663] pci 0000:02:02.0: [12d8:2608] type 01 class 0x060400 [ 1.092802] pci 0000:02:02.0: supports D1 D2 [ 1.092807] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.093007] iommu: Adding device 0000:02:02.0 to group 40 [ 1.093073] pci 0000:02:03.0: [12d8:2608] type 01 class 0x060400 [ 1.093209] pci 0000:02:03.0: supports D1 D2 [ 1.093214] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.093385] iommu: Adding device 0000:02:03.0 to group 41 [ 1.093456] pci 0000:02:04.0: [12d8:2608] type 01 class 0x060400 [ 1.093591] pci 0000:02:04.0: supports D1 D2 [ 1.093595] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.093774] iommu: Adding device 0000:02:04.0 to group 42 [ 1.093865] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.093876] pci 0000:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.093887] pci 0000:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.093897] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.094034] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 1.094061] pci 0000:03:00.0: reg 0x10: [io 0x0000-0x00ff] [ 1.094092] pci 0000:03:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 1.094113] pci 0000:03:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.094249] pci 0000:03:00.0: supports D1 D2 [ 1.094254] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.094435] iommu: Adding device 0000:03:00.0 to group 43 [ 1.100557] brd: module loaded [ 1.102733] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03 [ 1.102892] pci 0000:04:00.0: [8086:24fd] type 00 class 0x028000 [ 1.102938] pci 0000:04:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 1.103176] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 1.103382] iommu: Adding device 0000:04:00.0 to group 44 [ 1.104778] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.104782] Extcon AUX1(HDMI) enable [ 1.105379] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.105434] tegradc tegradc.1: No lt-data, using default setting [ 1.105454] tegradc tegradc.1: No hpd-gpio in DT [ 1.105480] tegradc tegradc.1: DT parsed successfully [ 1.105510] tegradc tegradc.1: Display dc.ffffff800d540000 registered with id=1 [ 1.106422] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.107418] loop: module loaded [ 1.107470] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.107563] tegra_profiler: auth: init [ 1.108094] THERMAL EST: found 2 subdevs [ 1.108098] THERMAL EST num_resources: 0 [ 1.108102] [THERMAL EST subdev 0] [ 1.108107] [THERMAL EST subdev 1] [ 1.108426] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.108428] THERMAL EST: thz register success. [ 1.108526] THERMAL EST: end of probe, return err: 0 [ 1.109193] sd: No Scsi addr parsed to reserve index [ 1.109219] hisi_sas: driver version v1.6 [ 1.114974] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04 [ 1.115113] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05 [ 1.115249] pci 0000:06:00.0: [1d79:2263] type 00 class 0x010802 [ 1.115286] pci 0000:06:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 1.115664] iommu: Adding device 0000:06:00.0 to group 45 [ 1.118948] libphy: Fixed MDIO Bus: probed [ 1.119507] tun: Universal TUN/TAP device driver, 1.6 [ 1.119511] tun: (C) 1999-2004 Max Krasnyansky [ 1.123253] tegradc tegradc.1: probed [ 1.123308] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.123311] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.123368] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.123370] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.123411] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.123414] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.123456] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.123459] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.123639] tegradc tegradc.1: fb registered [ 1.124350] PPP generic driver version 2.4.2 [ 1.126725] PPP BSD Compression module registered [ 1.126728] PPP Deflate Compression module registered [ 1.126743] PPP MPPE Compression module registered [ 1.126747] NET: Registered protocol family 24 [ 1.126754] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06 [ 1.126766] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 06 [ 1.126776] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 06 [ 1.126781] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.126786] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.126794] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.126798] usbcore: registered new interface driver r8152 [ 1.126803] tegradc tegradc.1: blank - powerdown [ 1.126814] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.126817] Extcon DP: HPD disabled [ 1.126820] hpd: hpd_switch 0 [ 1.126824] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.126832] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.126838] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.126840] usbcore: registered new interface driver asix [ 1.126881] usbcore: registered new interface driver ax88179_178a [ 1.126915] usbcore: registered new interface driver cdc_ether [ 1.126938] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000 [ 1.126946] usbcore: registered new interface driver net1080 [ 1.126961] pci 0000:07:00.0: reg 0x10: [io 0x0000-0x00ff] [ 1.126975] usbcore: registered new interface driver cdc_subset [ 1.126989] pci 0000:07:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 1.127003] usbcore: registered new interface driver zaurus [ 1.127008] pci 0000:07:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.127043] usbcore: registered new interface driver cdc_ncm [ 1.127143] pci 0000:07:00.0: supports D1 D2 [ 1.127147] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.127185] VFIO - User Level meta-driver version: 0.3 [ 1.127352] iommu: Adding device 0000:07:00.0 to group 46 [ 1.128395] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.128405] ehci-pci: EHCI PCI platform driver [ 1.128446] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.128453] ohci-pci: OHCI PCI platform driver [ 1.128487] ohci-platform: OHCI generic platform driver [ 1.130366] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.135434] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.136510] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f9064c00 id [ 1.138034] usbcore: registered new interface driver uas [ 1.138085] usbcore: registered new interface driver usb-storage [ 1.138169] usbcore: registered new interface driver usbserial [ 1.138709] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07 [ 1.138836] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x137fffff] [ 1.138845] pci 0000:00:01.0: BAR 15: assigned [mem 0x20000000-0x207fffff 64bit pref] [ 1.138853] pci 0000:00:02.0: BAR 15: assigned [mem 0x20800000-0x208fffff 64bit pref] [ 1.138859] pci 0000:00:01.0: BAR 13: assigned [io 0x1000-0x4fff] [ 1.138865] pci 0000:00:02.0: BAR 13: assigned [io 0x5000-0x5fff] [ 1.138874] pci 0000:01:00.0: BAR 14: assigned [mem 0x13000000-0x137fffff] [ 1.138881] pci 0000:01:00.0: BAR 15: assigned [mem 0x20000000-0x207fffff 64bit pref] [ 1.138886] pci 0000:01:00.0: BAR 13: assigned [io 0x1000-0x4fff] [ 1.138897] pci 0000:02:01.0: BAR 14: assigned [mem 0x13000000-0x131fffff] [ 1.138904] pci 0000:02:01.0: BAR 15: assigned [mem 0x20000000-0x201fffff 64bit pref] [ 1.138910] pci 0000:02:02.0: BAR 14: assigned [mem 0x13200000-0x133fffff] [ 1.138916] pci 0000:02:02.0: BAR 15: assigned [mem 0x20200000-0x203fffff 64bit pref] [ 1.138921] pci 0000:02:03.0: BAR 14: assigned [mem 0x13400000-0x135fffff] [ 1.138927] pci 0000:02:03.0: BAR 15: assigned [mem 0x20400000-0x205fffff 64bit pref] [ 1.138933] pci 0000:02:04.0: BAR 14: assigned [mem 0x13600000-0x137fffff] [ 1.138939] pci 0000:02:04.0: BAR 15: assigned [mem 0x20600000-0x207fffff 64bit pref] [ 1.138944] pci 0000:02:01.0: BAR 13: assigned [io 0x1000-0x1fff] [ 1.138950] pci 0000:02:02.0: BAR 13: assigned [io 0x2000-0x2fff] [ 1.138955] pci 0000:02:03.0: BAR 13: assigned [io 0x3000-0x3fff] [ 1.138960] pci 0000:02:04.0: BAR 13: assigned [io 0x4000-0x4fff] [ 1.138969] pci 0000:03:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 1.138990] pci 0000:03:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref] [ 1.139008] pci 0000:03:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 1.139018] pci 0000:02:01.0: PCI bridge to [bus 03] [ 1.139024] pci 0000:02:01.0: bridge window [io 0x1000-0x1fff] [ 1.139032] pci 0000:02:01.0: bridge window [mem 0x13000000-0x131fffff] [ 1.139039] pci 0000:02:01.0: bridge window [mem 0x20000000-0x201fffff 64bit pref] [ 1.139051] pci 0000:04:00.0: BAR 0: assigned [mem 0x13200000-0x13201fff 64bit] [ 1.139075] pci 0000:02:02.0: PCI bridge to [bus 04] [ 1.139080] pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] [ 1.139088] pci 0000:02:02.0: bridge window [mem 0x13200000-0x133fffff] [ 1.139095] pci 0000:02:02.0: bridge window [mem 0x20200000-0x203fffff 64bit pref] [ 1.139105] pci 0000:02:03.0: PCI bridge to [bus 05] [ 1.139110] pci 0000:02:03.0: bridge window [io 0x3000-0x3fff] [ 1.139118] pci 0000:02:03.0: bridge window [mem 0x13400000-0x135fffff] [ 1.139125] pci 0000:02:03.0: bridge window [mem 0x20400000-0x205fffff 64bit pref] [ 1.139138] pci 0000:06:00.0: BAR 0: assigned [mem 0x13600000-0x13603fff 64bit] [ 1.139156] pci 0000:02:04.0: PCI bridge to [bus 06] [ 1.139162] pci 0000:02:04.0: bridge window [io 0x4000-0x4fff] [ 1.139170] pci 0000:02:04.0: bridge window [mem 0x13600000-0x137fffff] [ 1.139176] pci 0000:02:04.0: bridge window [mem 0x20600000-0x207fffff 64bit pref] [ 1.139185] pci 0000:01:00.0: PCI bridge to [bus 02-06] [ 1.139191] pci 0000:01:00.0: bridge window [io 0x1000-0x4fff] [ 1.139199] pci 0000:01:00.0: bridge window [mem 0x13000000-0x137fffff] [ 1.139206] pci 0000:01:00.0: bridge window [mem 0x20000000-0x207fffff 64bit pref] [ 1.139215] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 1.139220] pci 0000:00:01.0: bridge window [io 0x1000-0x4fff] [ 1.139226] pci 0000:00:01.0: bridge window [mem 0x13000000-0x137fffff] [ 1.139231] pci 0000:00:01.0: bridge window [mem 0x20000000-0x207fffff 64bit pref] [ 1.139241] pci 0000:07:00.0: BAR 4: assigned [mem 0x20800000-0x20803fff 64bit pref] [ 1.139259] pci 0000:07:00.0: BAR 2: assigned [mem 0x20804000-0x20804fff 64bit pref] [ 1.139275] pci 0000:07:00.0: BAR 0: assigned [io 0x5000-0x50ff] [ 1.139282] pci 0000:00:02.0: PCI bridge to [bus 07] [ 1.139287] pci 0000:00:02.0: bridge window [io 0x5000-0x5fff] [ 1.139295] pci 0000:00:02.0: bridge window [mem 0x20800000-0x208fffff 64bit pref] [ 1.139672] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.139677] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.139682] pci 0000:02:01.0: Signaling PME through PCIe PME interrupt [ 1.139685] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 1.139689] pci 0000:02:02.0: Signaling PME through PCIe PME interrupt [ 1.139693] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 1.139696] pci 0000:02:03.0: Signaling PME through PCIe PME interrupt [ 1.139700] pci 0000:02:04.0: Signaling PME through PCIe PME interrupt [ 1.139704] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt [ 1.139710] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 1.139836] aer 0000:00:01.0:pcie002: service driver aer loaded [ 1.139863] tegradc tegradc.0: nominal-pclk:25174825 parent:25173906 div:1.0 pclk:25173906 24923052~27440532 [ 1.139984] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release [ 1.140018] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.140037] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.140042] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.140047] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt [ 1.140053] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 1.140148] aer 0000:00:02.0:pcie002: service driver aer loaded [ 1.140760] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.140797] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.140954] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.140961] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.140966] usb usb1: Product: xHCI Host Controller [ 1.140970] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.140975] usb usb1: SerialNumber: 70090000.xusb [ 1.142123] r8168 0000:03:00.0: enabling device (0000 -> 0003) [ 1.142141] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 1.142364] hub 1-0:1.0: USB hub found [ 1.142400] hub 1-0:1.0: 5 ports detected [ 1.142937] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.142949] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.143074] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.143183] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.143190] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.143194] usb usb2: Product: xHCI Host Controller [ 1.143199] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.143204] usb usb2: SerialNumber: 70090000.xusb [ 1.143674] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.144063] hub 2-0:1.0: USB hub found [ 1.144097] hub 2-0:1.0: 4 ports detected [ 1.144797] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.144803] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.145182] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.145191] tegra-xudc-new 700d0000.xudc: vbus state: 1 [ 1.145202] tegra-xudc-new 700d0000.xudc: device mode on: 0 [ 1.145221] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0 [ 1.145243] tegra-xudc-new 700d0000.xudc: active: 0 => 1 [ 1.145779] mousedev: PS/2 mouse device common for all mice [ 1.145848] usbcore: registered new interface driver xpad [ 1.164139] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 1.164156] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 1.164480] nvme nvme0: pci function 0000:06:00.0 [ 1.164511] nvme 0000:06:00.0: enabling device (0000 -> 0002) [ 1.164609] r8168 0000:07:00.0: enabling device (0000 -> 0003) [ 1.164627] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 1.185678] r8168 0000:07:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 1.185744] r8168 0000:07:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 48:b0:2d:67:ad:a4 from device tree [ 1.186098] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 1.186110] sysfs: cannot create duplicate filename '/kernel/rt8168_power' [ 1.186128] ------------[ cut here ]------------ [ 1.186142] WARNING: CPU: 2 PID: 1013 at /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 [ 1.186145] Modules linked in: [ 1.186156] CPU: 2 PID: 1013 Comm: kworker/2:1 Not tainted 4.9.253-tegra #1 [ 1.186160] Hardware name: NVIDIA Jetson Nano Developer Kit (DT) [ 1.186173] Workqueue: events pcie_delayed_detect [ 1.186180] task: ffffffc0f7832a00 task.stack: ffffffc0f783c000 [ 1.186186] PC is at sysfs_warn_dup+0x68/0x88 [ 1.186191] LR is at sysfs_warn_dup+0x68/0x88 [ 1.186195] pc : [] lr : [] pstate: 40400045 [ 1.186198] sp : ffffffc0f783f8b0 [ 1.186201] x29: ffffffc0f783f8b0 x28: ffffffc0fa64c0a0 [ 1.186210] x27: 0000000000000000 x26: ffffff8009060000 [ 1.186218] x25: ffffff800a1ca0b8 x24: ffffffc0f7820918 [ 1.186225] x23: ffffff800a7b4000 x22: ffffffc0f9ae24c0 [ 1.186232] x21: ffffffc0f9aeb0f0 x20: ffffff80094a61b8 [ 1.186239] x19: ffffffc0f9761000 x18: 00000000fffffff6 [ 1.186246] x17: 0000000000000000 x16: 0000000000000000 [ 1.186252] x15: 0000000000000007 x14: 73746e6574617020 [ 1.186259] x13: 676e69776f6c6c6f x12: 0000000000000000 [ 1.186265] x11: 0000000000000004 x10: 0000000000000282 [ 1.186272] x9 : 0000000000000000 x8 : ffffffc0fefa12e4 [ 1.186279] x7 : 0000000000000000 x6 : 0000000000000001 [ 1.186285] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.186292] x3 : ffffffffffffffff x2 : ffffff8009ea4260 [ 1.186299] x1 : ffffffc0f7832a00 x0 : 000000000000003e [ 1.186310] ---[ end trace 3c072e7aa4cfebc7 ]--- [ 1.186313] Call trace: [ 1.186320] [] sysfs_warn_dup+0x68/0x88 [ 1.186326] [] sysfs_create_dir_ns+0x9c/0xb0 [ 1.186333] [] kobject_add_internal+0x98/0x348 [ 1.186338] [] kobject_add+0x88/0xf0 [ 1.186343] [] kobject_create_and_add+0x38/0x80 [ 1.186350] [] rtl8168_init_one+0x1194/0x1248 [ 1.186354] [] rtl8168_probe+0x7c/0x118 [ 1.186360] [] pci_device_probe+0xa4/0x140 [ 1.186366] [] driver_probe_device+0x298/0x448 [ 1.186371] [] __device_attach_driver+0xa8/0x148 [ 1.186376] [] bus_for_each_drv+0x58/0xa8 [ 1.186381] [] __device_attach+0xc8/0x158 [ 1.186385] [] device_attach+0x24/0x30 [ 1.186392] [] pci_bus_add_device+0x58/0x98 [ 1.186397] [] pci_bus_add_devices+0x40/0x90 [ 1.186402] [] pci_bus_add_devices+0x88/0x90 [ 1.186406] [] pcie_delayed_detect+0x974/0xe00 [ 1.186413] [] process_one_work+0x1e4/0x4b0 [ 1.186418] [] worker_thread+0x50/0x4c8 [ 1.186423] [] kthread+0xec/0xf0 [ 1.186428] [] ret_from_fork+0x10/0x30 [ 1.186433] kobject_add_internal failed for rt8168_power with -EEXIST, don't try to register things with the same name in the same directory. [ 1.199142] kobject_create_and_add: kobject_add error: -17 [ 1.199145] unable to create rt8168_power_saver kernel object! [ 1.204993] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 1.222460] tegradc tegradc.0: blank - powerdown [ 1.246771] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.246855] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 1.247070] usb usb2: usb_suspend_both: status 0 [ 1.262166] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 1.262168] Extcon AUX1(HDMI) disable [ 1.275230] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.277381] rtc rtc1: alarm rtc device [ 1.277392] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.277411] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.277828] i2c /dev entries driver [ 1.279506] i2c i2c-6: Added multiplexed i2c bus 7 [ 1.279863] i2c i2c-6: Added multiplexed i2c bus 8 [ 1.279868] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 1.280535] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.303813] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.303879] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.303953] imx219 7-0010: board setup failed [ 1.304011] imx219: probe of 7-0010 failed with error -121 [ 1.304517] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.305542] tegradc tegradc.0: unblank [ 1.317692] tegradc tegradc.0: nominal-pclk:138500000 parent:138500000 div:1.0 pclk:138500000 137115000~150965000 [ 1.317754] tegradc tegradc.0: hdmi: tmds rate:138500K prod-setting:prod_c_hdmi_75m_150m [ 1.327773] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.327837] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.327900] imx219 8-0010: board setup failed [ 1.327947] imx219: probe of 8-0010 failed with error -121 [ 1.329013] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.331057] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.331061] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.331363] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.331375] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.331382] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.331506] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.331515] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.331521] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.331674] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.331682] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.331686] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.331858] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.332401] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.332445] tegra_aotag tegra-aotag: Invalid temp readout [ 1.332464] tegra_aotag tegra-aotag: Invalid temp readout [ 1.332480] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.332488] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.333264] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.333278] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.333472] tegra_aotag tegra-aotag: Invalid temp readout [ 1.333494] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.333934] parse_throttle_dt_data: Num cap clks = 6 [ 1.333939] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.333945] parse_throttle_dt_data: clk=gpu type=4 [ 1.333964] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.333984] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.334006] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.334009] parse_throttle_dt_data: clk=emc type=3 [ 1.334383] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.334530] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.334697] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.335324] FAN dev name: pwm-fan [ 1.335365] FAN:gpio request success. [ 1.335405] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.335679] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.335791] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.335797] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.335869] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.335874] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.335878] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.335882] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.335886] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.335890] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.335894] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.335898] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.335902] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.335907] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.338121] device-mapper: uevent: version 1.0.3 [ 1.338516] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.341103] tegra210-cpufreq cpufreq: probe()...completed [ 1.341805] sdhci: Secure Digital Host Controller Interface driver [ 1.341807] sdhci: Copyright(c) Pierre Ossman [ 1.341809] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.342170] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 1.349174] tegra-se 70012000.se: tegra_se_probe: complete [ 1.349814] hidraw: raw HID events driver (C) Jiri Kosina [ 1.351347] usbcore: registered new interface driver usbhid [ 1.351348] usbhid: USB HID core driver [ 1.352283] tegradc tegradc.0: sync windows ret = 246 [ 1.353576] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.353747] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.355721] nvpmodel: initialized successfully [ 1.356797] usbcore: registered new interface driver snd-usb-audio [ 1.356862] No Device Node present for smmu client: snd-soc-dummy !! [ 1.356867] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.356884] iommu: Adding device snd-soc-dummy to group 47 [ 1.362392] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.377081] OPE platform probe [ 1.377169] OPE platform probe successful [ 1.377443] OPE platform probe [ 1.377522] OPE platform probe successful [ 1.386729] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 1.400769] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.400773] Extcon HDMI: HPD enabled [ 1.400794] tegradc tegradc.0: hdmi: plugged [ 1.401725] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.401843] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.401979] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.402097] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.402209] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.402426] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.402546] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.402684] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.402871] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.402990] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.414690] u32 classifier [ 1.414693] Actions configured [ 1.414769] Initializing XFRM netlink socket [ 1.415483] NET: Registered protocol family 10 [ 1.416186] NET: Registered protocol family 17 [ 1.416198] NET: Registered protocol family 15 [ 1.416275] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.416324] Bluetooth: RFCOMM socket layer initialized [ 1.416333] Bluetooth: RFCOMM ver 1.11 [ 1.416338] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.416343] Bluetooth: HIDP socket layer initialized [ 1.416360] 9pnet: Installing 9P2000 support [ 1.416397] Key type dns_resolver registered [ 1.416815] Registered cp15_barrier emulation handler [ 1.416821] Registered setend emulation handler [ 1.417843] registered taskstats version 1 [ 1.418565] Adding domain ve2-pd to PM domain host1x-pd [ 1.418818] Adding domain ve-pd to PM domain host1x-pd [ 1.420907] isp 54600000.isp: initialized [ 1.421812] isp 54680000.isp: initialized [ 1.432162] last reset is due to software reset [ 1.432166] KERNEL: PMC reset status reg: 0x3 [ 1.432225] BL: PMC reset status reg: 0x3 [ 1.432228] BL: PMIC poweroff Event Recorder: 0x0 [ 1.433702] clk_cbus_recalc_rate: no gbus parent [ 1.433708] clk_cbus_round_rate: no gbus parent [ 1.433710] clk_cbus_round_rate: no gbus parent [ 1.433715] clk_cbus_recalc_rate: no gbus parent [ 1.433818] clk_cbus_recalc_rate: no gbus parent [ 1.433821] clk_cbus_round_rate: no gbus parent [ 1.433823] clk_cbus_round_rate: no gbus parent [ 1.433827] clk_cbus_recalc_rate: no gbus parent [ 1.434508] tegra_dvfs: GPU-cap: registered [ 1.434562] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.434565] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 1.434567] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled [ 1.435952] tegra_dvfs: vdd-gpu-vts: registered [ 1.436735] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.437358] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.437846] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.439356] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.439704] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.439818] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 1.439926] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 1.444057] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.446420] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 1.467351] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:19:48 UTC (946689588) [ 1.468358] vi 54080000.vi: vi_probe: ++ [ 1.470720] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.470819] vi 54080000.vi: initialized [ 1.472816] vi 54080000.vi: subdev nvcsi--2 bound [ 1.472925] vi 54080000.vi: subdev nvcsi--1 bound [ 1.473158] mmcblk mmc0:0001: Card claimed for testing. [ 1.474523] Disable partitions left on by BL [ 1.474526] disb [ 1.474578] bwmgr: missing cdev-type property [ 1.474704] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.474710] DRAM derating cdev registered. [ 1.475580] ALSA device list: [ 1.475584] #0: tegra-hda at 0x70038000 irq 82 [ 1.475586] #1: tegra-snd-t210ref-mobile-rt565x [ 1.478944] Freeing unused kernel memory: 8640K [ 1.493167] usb 1-2: New USB device found, idVendor=2109, idProduct=2822 [ 1.493173] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.493177] usb 1-2: Product: USB2.0 Hub [ 1.493180] usb 1-2: Manufacturer: VIA Labs, Inc. [ 1.494151] hub 1-2:1.0: USB hub found [ 1.494249] hub 1-2:1.0: 5 ports detected [ 1.504478] Root device found: mmcblk0p1 [ 1.505900] Found dev node: /dev/mmcblk0p1 [ 1.617067] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 1.637032] usb 2-1: New USB device found, idVendor=2109, idProduct=0822 [ 1.637036] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.637039] usb 2-1: Product: USB3.1 Hub [ 1.637042] usb 2-1: Manufacturer: VIA Labs, Inc. [ 1.638020] hub 2-1:1.0: USB hub found [ 1.638165] hub 2-1:1.0: 4 ports detected [ 1.754716] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 1.776732] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b [ 1.776737] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.789345] EXT4-fs (mmcblk0p1): 26 orphan inodes deleted [ 1.789347] EXT4-fs (mmcblk0p1): recovery complete [ 1.810527] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.812347] Rootfs mounted over mmcblk0p1 [ 1.825608] Switching from initrd to actual rootfs [ 1.898256] systemd[1]: System time before build time, advancing clock. [ 1.917204] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.928496] cgroup: cgroup2: unknown option "nsdelegate" [ 1.945332] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.946112] systemd[1]: Detected architecture arm64. [ 1.968311] systemd[1]: Set hostname to . [ 2.054455] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.054464] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.066711] tegra_cec 70015000.tegra_cec: physical address: 00:00. [ 2.131232] tegra_cec 70015000.tegra_cec: Sent res: -113. [ 2.131237] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.151051] random: systemd: uninitialized urandom read (16 bytes read) [ 2.151082] systemd[1]: Reached target Swap. [ 2.151391] random: systemd: uninitialized urandom read (16 bytes read) [ 2.153290] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.153326] random: systemd: uninitialized urandom read (16 bytes read) [ 2.154991] systemd[1]: Created slice User and Session Slice. [ 2.155794] systemd[1]: Created slice System Slice. [ 2.156644] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 2.202694] usb 1-2.3: new low-speed USB device number 4 using tegra-xusb [ 2.209487] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.226937] usb 1-2.3: New USB device found, idVendor=093a, idProduct=2510 [ 2.226944] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.226947] usb 1-2.3: Product: USB Optical Mouse [ 2.226951] usb 1-2.3: Manufacturer: PixArt [ 2.230748] input: PixArt USB Optical Mouse as /devices/70090000.xusb/usb1/1-2/1-2.3/1-2.3:1.0/0003:093A:2510.0001/input/input2 [ 2.231384] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-70090000.xusb-2.3/input0 [ 2.275266] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 2.303015] usb 2-1.2: new SuperSpeed USB device number 3 using tegra-xusb [ 2.324101] usb 2-1.2: New USB device found, idVendor=152d, idProduct=0578 [ 2.324108] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.324112] usb 2-1.2: Product: USB to ATA/ATAPI Bridge [ 2.324115] usb 2-1.2: Manufacturer: JMicron [ 2.324118] usb 2-1.2: SerialNumber: 0123456789ABCDEF [ 2.329489] scsi host0: uas [ 2.332328] scsi 0:0:0:0: Direct-Access JMicron Generic 3102 PQ: 0 ANSI: 6 [ 2.363661] sd 0:0:0:0: [sda] Unit Not Ready [ 2.368131] sd 0:0:0:0: [sda] Sense Key : 0x4 [current] [ 2.368136] sd 0:0:0:0: [sda] ASC=0x44 <>ASCQ=0x81 [ 2.369299] sd 0:0:0:0: [sda] Read Capacity(16) failed: Result: hostbyte=0x00 driverbyte=0x08 [ 2.369306] sd 0:0:0:0: [sda] Sense Key : 0x4 [current] [ 2.369310] sd 0:0:0:0: [sda] ASC=0x44 <>ASCQ=0x81 [ 2.370410] sd 0:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x00 driverbyte=0x08 [ 2.370417] sd 0:0:0:0: [sda] Sense Key : 0x4 [current] [ 2.370421] sd 0:0:0:0: [sda] ASC=0x44 <>ASCQ=0x81 [ 2.372256] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled [ 2.380188] sd 0:0:0:0: [sda] Asking for cache data failed [ 2.386423] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 2.401468] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (0 bytes) [ 2.420734] sd 0:0:0:0: [sda] Unit Not Ready [ 2.425074] sd 0:0:0:0: [sda] Sense Key : 0x4 [current] [ 2.425079] sd 0:0:0:0: [sda] ASC=0x44 <>ASCQ=0x81 [ 2.426224] sd 0:0:0:0: [sda] Read Capacity(16) failed: Result: hostbyte=0x00 driverbyte=0x08 [ 2.426231] sd 0:0:0:0: [sda] Sense Key : 0x4 [current] [ 2.426236] sd 0:0:0:0: [sda] ASC=0x44 <>ASCQ=0x81 [ 2.427336] sd 0:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x00 driverbyte=0x08 [ 2.427343] sd 0:0:0:0: [sda] Sense Key : 0x4 [current] [ 2.427348] sd 0:0:0:0: [sda] ASC=0x44 <>ASCQ=0x81 [ 2.430588] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.458708] usb 1-2.4: new low-speed USB device number 5 using tegra-xusb [ 2.485453] usb 1-2.4: New USB device found, idVendor=413c, idProduct=2113 [ 2.485460] usb 1-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.485464] usb 1-2.4: Product: Dell KB216 Wired Keyboard [ 2.490129] input: Dell KB216 Wired Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.4/1-2.4:1.0/0003:413C:2113.0002/input/input3 [ 2.532017] systemd-journald[2028]: Received request to flush runtime journal from PID 1 [ 2.547133] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-70090000.xusb-2.4/input0 [ 2.552617] input: Dell KB216 Wired Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.4/1-2.4:1.1/0003:413C:2113.0003/input/input4 [ 2.610994] hid-generic 0003:413C:2113.0003: input,hidraw2: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-70090000.xusb-2.4/input1 [ 2.690734] usb 1-2.5: new high-speed USB device number 6 using tegra-xusb [ 2.711945] usb 1-2.5: New USB device found, idVendor=2109, idProduct=8822 [ 2.711951] usb 1-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.711955] usb 1-2.5: Product: USB Billboard Device [ 2.711958] usb 1-2.5: Manufacturer: VIA Labs, Inc. [ 2.711961] usb 1-2.5: SerialNumber: 0000000000000001 [ 3.123895] using random self ethernet address [ 3.131175] using random host ethernet address [ 3.652996] Mass Storage Function, version: 2009/09/11 [ 3.653002] LUN: removable file: (no medium) [ 3.675232] using random self ethernet address [ 3.684680] using random host ethernet address [ 3.729612] random: crng init done [ 3.733046] random: 7 urandom warning(s) missed due to ratelimiting [ 3.755326] rndis0: HOST MAC fa:dd:5e:7d:34:d4 [ 3.755614] rndis0: MAC fa:dd:5e:7d:34:d5 [ 3.760173] usb0: HOST MAC fa:dd:5e:7d:34:d6 [ 3.761981] usb0: MAC fa:dd:5e:7d:34:d7 [ 3.762022] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 3.767997] l4tbr0: port 1(rndis0) entered blocking state [ 3.768002] l4tbr0: port 1(rndis0) entered disabled state [ 3.772659] device rndis0 entered promiscuous mode [ 3.778211] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 3.785341] l4tbr0: port 2(usb0) entered blocking state [ 3.785345] l4tbr0: port 2(usb0) entered disabled state [ 3.785669] device usb0 entered promiscuous mode [ 3.804119] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 4.058079] android_work: did not send uevent (0 0 (null)) [ 4.131195] android_work: sent uevent USB_STATE=CONNECTED [ 4.186226] android_work: sent uevent USB_STATE=DISCONNECTED [ 4.277116] Intel(R) Wireless WiFi driver for Linux [ 4.277120] Copyright(c) 2003- 2015 Intel Corporation [ 4.277282] iwlwifi 0000:04:00.0: enabling device (0000 -> 0002) [ 4.279105] android_work: sent uevent USB_STATE=CONNECTED [ 4.282343] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2 [ 4.291634] configfs-gadget gadget: high-speed config #1: c [ 4.291658] tegra-xudc-new 700d0000.xudc: ep 5 (type: 3, dir: in) enabled [ 4.291673] tegra-xudc-new 700d0000.xudc: ep 3 (type: 2, dir: in) enabled [ 4.291687] tegra-xudc-new 700d0000.xudc: ep 2 (type: 2, dir: out) enabled [ 4.291773] tegra-xudc-new 700d0000.xudc: ep 9 (type: 3, dir: in) enabled [ 4.291788] tegra-xudc-new 700d0000.xudc: ep 7 (type: 2, dir: in) enabled [ 4.291801] tegra-xudc-new 700d0000.xudc: ep 4 (type: 2, dir: out) enabled [ 4.291834] tegra-xudc-new 700d0000.xudc: ep 15 (type: 3, dir: in) enabled [ 4.291852] tegra-xudc-new 700d0000.xudc: ep 11 (type: 2, dir: in) enabled [ 4.291871] tegra-xudc-new 700d0000.xudc: ep 6 (type: 2, dir: out) enabled [ 4.294193] iwlwifi 0000:04:00.0: Falling back to user helper [ 4.301021] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled [ 4.301036] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled [ 4.301855] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 4.301981] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 4.302027] tegra-xudc-new 700d0000.xudc: ep 13 disabled [ 4.302116] tegra-xudc-new 700d0000.xudc: ep 8 disabled [ 4.302466] android_work: sent uevent USB_STATE=CONFIGURED [ 4.319435] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled [ 4.319453] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled [ 4.485043] zram: Added device: zram0 [ 4.485520] zram: Added device: zram1 [ 4.497679] zram: Added device: zram2 [ 4.500747] zram: Added device: zram3 [ 4.532594] zram0: detected capacity change from 0 to 519421952 [ 4.565596] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.565622] cpu-throttle-alert cooling device registered. [ 4.565773] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.565788] gpu-throttle-alert cooling device registered. [ 4.566010] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.566026] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.566040] hot-surface-alert cooling device registered. [ 4.608626] Adding 507244k swap on /dev/zram0. Priority:5 extents:1 across:507244k SS [ 4.637974] zram1: detected capacity change from 0 to 519421952 [ 4.644719] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 4.651696] eth1: 0xffffff800a7b4000, 48:b0:2d:67:ad:a4, IRQ 411 [ 4.697526] Adding 507244k swap on /dev/zram1. Priority:5 extents:1 across:507244k SS [ 4.710507] zram2: detected capacity change from 0 to 519421952 [ 4.748320] Adding 507244k swap on /dev/zram2. Priority:5 extents:1 across:507244k SS [ 4.759729] zram3: detected capacity change from 0 to 519421952 [ 4.774091] Adding 507244k swap on /dev/zram3. Priority:5 extents:1 across:507244k SS [ 4.778233] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 4.813941] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.827732] eth0: 0xffffff800a4fe000, 00:00:00:00:00:03, IRQ 409 [ 4.849131] usbcore: registered new interface driver btusb [ 4.855419] Bluetooth: hci0: Firmware revision 0.1 build 226 week 17 2018 [ 4.920133] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.425982] Bridge firewalling registered [ 5.466734] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.789881] tegradc tegradc.0: unblank [ 5.790123] tegradc tegradc.1: blank - powerdown [ 5.942539] Netfilter messages via NETLINK v0.30. [ 5.944770] ctnetlink v0.93: registering with nfnetlink. [ 6.219865] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 6.597326] fuse init (API version 7.26) [ 6.738739] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2 [ 6.749308] iwlwifi 0000:04:00.0: Falling back to user helper [ 7.067737] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.067748] Bluetooth: BNEP socket layer initialized [ 7.199226] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2 [ 7.211803] iwlwifi 0000:04:00.0: Falling back to user helper [ 7.221977] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2 [ 7.232264] iwlwifi 0000:04:00.0: Falling back to user helper [ 7.261067] iwlwifi 0000:04:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm [ 7.317621] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230 [ 7.318832] iwlwifi 0000:04:00.0: L1 Disabled - LTR Enabled [ 7.319094] iwlwifi 0000:04:00.0: L1 Disabled - LTR Enabled [ 7.435183] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 7.436032] thermal thermal_zone6: failed to read out thermal zone (-5) [ 7.442764] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type iwlwifi_1 [ 7.522868] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.525096] iwlwifi 0000:04:00.0: L1 Disabled - LTR Enabled [ 7.525361] iwlwifi 0000:04:00.0: L1 Disabled - LTR Enabled [ 7.644752] iwlwifi 0000:04:00.0: L1 Disabled - LTR Enabled [ 7.645014] iwlwifi 0000:04:00.0: L1 Disabled - LTR Enabled [ 7.698428] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.763078] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.851206] r8168: eth1: link up [ 8.851268] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 10.784571] l4tbr0: port 2(usb0) entered blocking state [ 10.784577] l4tbr0: port 2(usb0) entered forwarding state [ 10.784652] l4tbr0: port 1(rndis0) entered blocking state [ 10.784656] l4tbr0: port 1(rndis0) entered forwarding state [ 10.785924] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 10.785946] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 26.389851] tegradc tegradc.0: blank - powerdown [ 26.447201] extcon-disp-state extcon:disp-state: cable 47 state 0 already set. [ 26.447212] Extcon AUX1(HDMI) disable [ 26.467688] tegradc tegradc.1: blank - powerdown [ 26.623117] tegradc tegradc.0: blank - powerdown [ 26.623129] tegradc tegradc.0: unblank [ 26.627522] tegradc tegradc.0: nominal-pclk:138500000 parent:138500000 div:1.0 pclk:138500000 137115000~150965000 [ 26.627616] tegradc tegradc.0: hdmi: tmds rate:138500K prod-setting:prod_c_hdmi_75m_150m [ 26.652261] tegradc tegradc.0: unblank [ 26.652292] tegradc tegradc.1: blank - powerdown [ 30.117881] tegradc tegradc.0: unblank [ 30.117895] tegradc tegradc.1: blank - powerdown [ 31.859295] vdd-fan: disabling [ 31.859300] vdd-usb-vbus: disabling [ 31.859302] vdd-usb-vbus2: disabling [ 31.859311] vddio-sdmmc-ap: disabling [ 31.859387] vddio-sdmmc3-ap: disabling [ 31.859446] vdd-3v3-sd: disabling [ 31.859451] avdd-io-edp-1v05: disabling [ 31.859454] vdd-usb-hub-en: disabling