[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5494-d8000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Apr 20 14:25:12 PDT 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00800000@92cb4000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 gpt tegra_fbmem=0x800000@0x92cb4000 is_hdmi_initialised=1 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29692(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3560280K/4159488K available (15358K kernel code, 2956K rwdata, 6696K rodata, 8640K init, 612K bss, 124072K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001740] Console: colour dummy device 80x25 [ 0.001750] console [tty0] enabled [ 0.001756] bootconsole [uart8250] disabled [ 0.001775] kmemleak: Kernel memory leak detector disabled [ 0.001797] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001811] pid_max: default: 32768 minimum: 301 [ 0.002262] Security Framework initialized [ 0.002482] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002491] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003643] ftrace: allocating 47098 entries in 184 pages [ 0.173025] sched-energy: CPU device node has no sched-energy-costs [ 0.173057] ASID allocator initialised with 65536 entries [ 0.212334] tegra-id: chipid=22117. [ 0.212347] tegra-id: opt_subrevision=0. [ 0.212364] Tegra Speedo/IDDQ fuse revision 4 [ 0.212370] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.212376] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.212382] Tegra: CPU Speedo Value 2046, SoC Speedo Value 1938, GPU Speedo Value 2056 [ 0.212388] Tegra: CPU IDDQ Value 1888, SoC IDDQ Value 2124, GPU IDDQ Value 2615 [ 0.212407] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.212425] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.212432] DTB Build time: Apr 20 2022 14:28:59 [ 0.261133] CPU1: Booted secondary processor [411fd071] [ 0.293030] CPU2: Booted secondary processor [411fd071] [ 0.325003] CPU3: Booted secondary processor [411fd071] [ 0.325090] Brought up 4 CPUs [ 0.325096] SMP: Total of 4 processors activated. [ 0.325103] CPU features: detected feature: 32-bit EL0 Support [ 0.325363] CPU: All CPU(s) started at EL2 [ 0.325379] alternatives: patching kernel code [ 0.333813] devtmpfs: initialized [ 0.372367] Initilizing CustomIPI irq domain [ 0.372691] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.372709] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.384313] pinctrl core: initialized pinctrl subsystem [ 0.384953] OS set in device tree is not L4T. [ 0.385420] regulator-dummy: no parameters [ 0.385696] Initializing plugin-manager [ 0.385855] Plugin module not found [ 0.386046] node /plugin-manager/fragement@0 match with board >=3448-0002-100 [ 0.386591] node /plugin-manager/fragment@1 match with board >=3448-0002-101 [ 0.387020] node /plugin-manager/fragment@3 match with board >=3448-0002-100 [ 0.387745] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.387954] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.388574] node /plugin-manager/fragement@13 match with board >=3448-0002-300 [ 0.392148] NET: Registered protocol family 16 [ 0.393722] pstore: using zlib compression [ 0.393765] console [pstore-1] enabled [ 0.393770] pstore: Registered ramoops as persistent store backend [ 0.393776] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.409147] cpuidle: using governor menu [ 0.413521] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.415251] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.415276] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.417764] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.420187] Serial: AMBA PL011 UART driver [ 0.420692] tegra_powergate_init: DONE [ 0.420709] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.420715] DTB Build time: Apr 20 2022 14:28:59 [ 0.422759] Tegra reboot handler registered. [ 0.427422] iommu: Adding device tegra-carveouts to group 0 [ 0.427573] platform tegra-carveouts: domain=ffffffc0f94183d8 allocates as[0]=ffffffc0f9bcc0a8 [ 0.427948] iommu: Adding device smmu_test to group 1 [ 0.427995] platform smmu_test: domain=ffffffc0f9418618 allocates as[0]=ffffffc0f9bcc110 [ 0.428816] mc: mapped MMIO address: 0xffffff8008041000 -> 0x70019000 [ 0.428877] mc: mapped MMIO address: 0xffffff8008067000 -> 0x7001c000 [ 0.428933] mc: mapped MMIO address: 0xffffff800807b000 -> 0x7001d000 [ 0.428943] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.428970] mc-err: mcerr ops are set to t21x [ 0.439635] iommu: Adding device 70090000.xusb to group 2 [ 0.439911] iommu: Adding device 70006000.serial to group 3 [ 0.439970] platform 70006000.serial: domain=ffffffc0f9458cd8 allocates as[0]=ffffffc0f9bcc178 [ 0.440422] iommu: Adding device 70006040.serial to group 4 [ 0.440684] iommu: Adding device 70006200.serial to group 5 [ 0.440872] iommu: Adding device sound to group 6 [ 0.440928] platform sound: domain=ffffffc0f94ce258 allocates as[0]=ffffffc0f9bcc1e0 [ 0.441535] iommu: Adding device 7000d400.spi to group 7 [ 0.441849] iommu: Adding device 7000d600.spi to group 8 [ 0.442189] iommu: Adding device 50000000.host1x to group 9 [ 0.442469] iommu: Adding device 54080000.vi to group 10 [ 0.442876] iommu: Adding device 54600000.isp to group 11 [ 0.443156] iommu: Adding device 54680000.isp to group 12 [ 0.443433] iommu: Adding device tegradc.0 to group 13 [ 0.443491] platform tegradc.0: domain=ffffffc0f94e5018 allocates as[0]=ffffffc0f9bcc248 [ 0.447680] platform tegradc.0: IOVA linear map 0x0000000092cb4000(800000) [ 0.448072] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.448407] iommu: Adding device tegradc.1 to group 14 [ 0.448459] platform tegradc.1: domain=ffffffc0f94e5258 allocates as[0]=ffffffc0f9bcc2b0 [ 0.452635] platform tegradc.1: IOVA linear map 0x0000000092cb4000(800000) [ 0.453028] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.453329] iommu: Adding device 54340000.vic to group 15 [ 0.453536] iommu: Adding device 544c0000.nvenc to group 16 [ 0.453743] iommu: Adding device 54500000.tsec to group 17 [ 0.453939] iommu: Adding device 54100000.tsecb to group 18 [ 0.454131] iommu: Adding device 54480000.nvdec to group 19 [ 0.454328] iommu: Adding device 54380000.nvjpg to group 20 [ 0.455388] iommu: Adding device 546c0000.i2c to group 21 [ 0.455715] iommu: Adding device 57000000.gpu to group 22 [ 0.455787] platform 57000000.gpu: domain=ffffffc0f9548258 allocates as[0]=ffffffc0f9bcc318 [ 0.455831] platform 57000000.gpu: domain=ffffffc0f9548258 allocates as[1]=ffffffc0f9bcc380 [ 0.455868] platform 57000000.gpu: domain=ffffffc0f9548258 allocates as[2]=ffffffc0f9bcc3e8 [ 0.455907] platform 57000000.gpu: domain=ffffffc0f9548258 allocates as[3]=ffffffc0f9bcc450 [ 0.456779] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.456789] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.456800] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.456806] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.456811] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.509340] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.509349] tegra-pmc: Clear bootloader IO dpd settings [ 0.509368] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.509437] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.509731] iommu: Adding device 70012000.se to group 23 [ 0.510318] iommu: Adding device 1003000.pcie to group 24 [ 0.510369] platform 1003000.pcie: domain=ffffffc0f95489d8 allocates as[0]=ffffffc0f9bcc4b8 [ 0.510804] iommu: Adding device 7000c000.i2c to group 25 [ 0.511073] iommu: Adding device 7000c400.i2c to group 26 [ 0.511335] iommu: Adding device 7000c500.i2c to group 27 [ 0.511604] iommu: Adding device 7000c700.i2c to group 28 [ 0.511867] iommu: Adding device 7000d000.i2c to group 29 [ 0.512159] iommu: Adding device 7000d100.i2c to group 30 [ 0.512429] iommu: Adding device sdhci-tegra.3 to group 31 [ 0.512479] platform sdhci-tegra.3: domain=ffffffc0f9598558 allocates as[0]=ffffffc0f9bcc520 [ 0.513369] iommu: Adding device 700d0000.xudc to group 32 [ 0.516675] vdd-ac-bat: 5000 mV [ 0.517054] vdd-5v0-sys: 5000 mV [ 0.517785] vdd-5v0-hdmi: 5000 mV [ 0.518254] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.518531] vdd-1v8-sys: 1800 mV [ 0.518959] vdd-fan: 5000 mV [ 0.519186] vdd-fan: supplied by vdd-5v0-sys [ 0.519423] vdd-usb-vbus: 5000 mV [ 0.519674] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.520035] vdd-usb-vbus2: 5000 mV [ 0.550226] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.552521] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.553690] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.553718] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.553738] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.554085] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.562386] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.562737] SCSI subsystem initialized [ 0.562920] libata version 3.00 loaded. [ 0.563184] usbcore: registered new interface driver usbfs [ 0.563243] usbcore: registered new interface driver hub [ 0.563286] usbcore: registered new device driver usb [ 0.567482] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.572354] vdd-core: 600 <--> 1162 mV at 1125 mV [ 0.573077] random: fast init done [ 0.573344] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.576243] vdd-ddr-1v1: 1150 mV [ 0.580282] vdd-pre-reg-1v35: 1350 mV [ 0.584240] vdd-1v8: 1800 mV [ 0.588237] avdd-sys-1v2: 1200 mV [ 0.592242] vdd-pex-1v0: 1050 mV [ 0.592921] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.593456] max77620-ldo3: at 3100 mV [ 0.596245] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.596813] max77620-ldo5: at 3100 mV [ 0.600245] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.604240] avdd-1v05-pll: 1050 mV [ 0.608245] avdd-io-hdmi-dp: 1050 mV [ 0.610760] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.611086] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.611385] max77620 4-003c: max77620 probe successful [ 0.614212] media: Linux media interface: v0.10 [ 0.614275] Linux video capture interface: v2.00 [ 0.615296] pps_core: LinuxPPS API ver. 1 registered [ 0.615304] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.615325] PTP clock support registered [ 0.618630] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.619505] Advanced Linux Sound Architecture Driver Initialized. [ 0.620173] Bluetooth: Core ver 2.22 [ 0.620225] NET: Registered protocol family 31 [ 0.620229] Bluetooth: HCI device and connection manager initialized [ 0.620244] Bluetooth: HCI socket layer initialized [ 0.620252] Bluetooth: L2CAP socket layer initialized [ 0.620277] Bluetooth: SCO socket layer initialized [ 0.622017] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.622033] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.622077] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.622090] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.625587] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.626911] vdd-3v3-sys: 3300 mV [ 0.627297] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.627349] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.628324] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.628767] vdd-3v3-sd: 3300 mV [ 0.629186] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.629763] avdd-io-edp-1v05: 1050 mV [ 0.630153] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.630298] vdd-usb-hub-en: 5000 mV [ 0.630682] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.631795] camchar: rtcpu character device driver loaded [ 0.632623] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.634079] clocksource: Switched to clocksource arch_sys_counter [ 0.675228] VFS: Disk quotas dquot_6.6.0 [ 0.675361] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.675872] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.676382] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.676400] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.676615] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.676620] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.676633] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.676665] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.676671] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.676687] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.676695] nvmap_page_pool_init: Total RAM pages: 1008854 [ 0.676701] nvmap_page_pool_init: nvmap page pool size: 126106 pages (492 MB) [ 0.676790] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.677275] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.678301] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.686801] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.687256] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.687623] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.687897] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.688084] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.688365] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.688369] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.688804] NET: Registered protocol family 2 [ 0.688937] IP idents hash table entries: 65536 (order: 7, 524288 bytes) [ 0.691216] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.691433] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.691997] TCP: Hash tables configured (established 32768 bind 32768) [ 0.692163] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.692244] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.692661] NET: Registered protocol family 1 [ 0.693352] RPC: Registered named UNIX socket transport module. [ 0.693357] RPC: Registered udp transport module. [ 0.693361] RPC: Registered tcp transport module. [ 0.693365] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.693380] PCI: CLS 0 bytes, default 64 [ 0.693615] Trying to unpack rootfs image as initramfs... [ 0.993601] Freeing initrd memory: 6992K [ 1.003710] host1x 50000000.host1x: initialized [ 1.005720] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.009168] audit: initializing netlink subsys (disabled) [ 1.009266] audit: type=2000 audit(0.855:1): initialized [ 1.010027] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.020144] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.021622] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.022484] 9p: Installing v9fs 9p2000 file system support [ 1.025736] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.025853] io scheduler noop registered [ 1.026188] io scheduler cfq registered (default) [ 1.029005] gic 702f9000.agic: GIC IRQ controller registered [ 1.032024] iommu: Adding device 702ef000.adsp to group 33 [ 1.040934] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 1.041091] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.041707] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x920940f [ 1.041715] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.043985] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.044103] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.044203] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.044403] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.044495] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.044583] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.044673] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.044775] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.044865] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.044955] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.051259] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.052965] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.054951] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.056225] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.056574] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.057823] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.058047] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.058256] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.058533] Adding domain tsec-pd to PM domain host1x-pd [ 1.061874] tsec 54500000.tsec: initialized [ 1.063306] tsec 54100000.tsecb: initialized [ 1.064038] Adding domain nvdec-pd to PM domain host1x-pd [ 1.067600] nvdec 54480000.nvdec: initialized [ 1.068752] Adding domain vic03-pd to PM domain host1x-pd [ 1.068937] Adding domain msenc-pd to PM domain host1x-pd [ 1.069100] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.073188] falcon 54340000.vic: initialized [ 1.074504] falcon 544c0000.nvenc: initialized [ 1.075881] falcon 54380000.nvjpg: initialized [ 1.080528] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=96 [ 1.080577] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.080615] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.080670] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.080772] display board info: id 0x0, fab 0x0 [ 1.080832] generic_infoframe_type: 0x87 [ 1.080912] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.080919] tegra_cec 70015000.tegra_cec: probed [ 1.080986] tegradc tegradc.0: DT parsed successfully [ 1.081041] tegradc tegradc.0: Display dc.ffffff800abc0000 registered with id=0 [ 1.081653] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781 [ 1.089482] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 1.089491] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.089497] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 1.089502] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 1.089508] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.089533] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400 [ 1.089609] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.089777] iommu: Adding device 0000:00:01.0 to group 35 [ 1.089858] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 1.089927] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.090107] iommu: Adding device 0000:00:02.0 to group 36 [ 1.090110] tegradc tegradc.0: probed [ 1.090175] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.090185] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.090360] pci 0000:01:00.0: [144d:a808] type 00 class 0x010802 [ 1.090390] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 1.090742] iommu: Adding device 0000:01:00.0 to group 37 [ 1.091012] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.095562] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.096017] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.096022] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.096251] kfuse 7000fc00.kfuse: initialized [ 1.096886] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.097559] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.098351] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.098358] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.098672] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.099629] vdd-gpu: applied init 1000000uV constraint [ 1.099635] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.099967] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.102145] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.102297] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 1.102321] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 1.102349] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 1.102368] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.102497] pci 0000:02:00.0: supports D1 D2 [ 1.102502] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.102740] iommu: Adding device 0000:02:00.0 to group 38 [ 1.102981] Console: switching to colour frame buffer device 240x67 [ 1.103053] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.103094] tegradc tegradc.0: fb registered [ 1.103148] No Device Node present for smmu client: serial8250 !! [ 1.103155] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.103179] iommu: Adding device serial8250 to group 39 [ 1.108744] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 1.108769] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m [ 1.109115] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 1.109124] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 1.110650] console [ttyS0] disabled [ 1.110691] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.110726] console [ttyS0] enabled [ 1.111479] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.111696] serial-tegra 70006200.serial: RX in PIO mode [ 1.111775] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.112568] [drm] Initialized [ 1.114149] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 1.114196] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 1.114205] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 1.114211] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 1.114221] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13003fff 64bit] [ 1.114236] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.114244] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 1.114256] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 1.114274] pci 0000:02:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref] [ 1.114290] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 1.114298] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.114304] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 1.114312] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 1.114590] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.114595] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.114601] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 1.114712] aer 0000:00:01.0:pcie002: service driver aer loaded [ 1.114913] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.114918] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.114924] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 1.115023] aer 0000:00:02.0:pcie002: service driver aer loaded [ 1.120515] brd: module loaded [ 1.124423] loop: module loaded [ 1.124480] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.124570] tegra_profiler: auth: init [ 1.125158] THERMAL EST: found 2 subdevs [ 1.125163] THERMAL EST num_resources: 0 [ 1.125168] [THERMAL EST subdev 0] [ 1.125173] [THERMAL EST subdev 1] [ 1.125500] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.125503] THERMAL EST: thz register success. [ 1.125605] THERMAL EST: end of probe, return err: 0 [ 1.126419] sd: No Scsi addr parsed to reserve index [ 1.126446] hisi_sas: driver version v1.6 [ 1.127101] nvme nvme0: pci function 0000:01:00.0 [ 1.127144] nvme 0000:01:00.0: enabling device (0000 -> 0002) [ 1.131319] libphy: Fixed MDIO Bus: probed [ 1.131898] tun: Universal TUN/TAP device driver, 1.6 [ 1.131901] tun: (C) 1999-2004 Max Krasnyansky [ 1.132741] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.132744] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.132791] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.132794] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.132839] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.132841] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.132888] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.132891] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.133523] r8168 0000:02:00.0: enabling device (0000 -> 0003) [ 1.133541] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 1.134919] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.134923] Extcon AUX1(HDMI) enable [ 1.135502] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.135557] tegradc tegradc.1: No lt-data, using default setting [ 1.135576] tegradc tegradc.1: No hpd-gpio in DT [ 1.135602] tegradc tegradc.1: DT parsed successfully [ 1.135654] tegradc tegradc.1: Display dc.ffffff800d540000 registered with id=1 [ 1.136538] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.146022] tegradc tegradc.1: probed [ 1.146527] tegradc tegradc.1: fb registered [ 1.149654] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.149660] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.149668] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.149676] tegradc tegradc.1: blank - powerdown [ 1.149687] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.149690] Extcon DP: HPD disabled [ 1.149693] hpd: hpd_switch 0 [ 1.149697] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.149705] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.149711] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.154638] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 1.154699] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 48:b0:2d:69:e2:68 from device tree [ 1.155085] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 1.155117] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 1.155556] PPP generic driver version 2.4.2 [ 1.158147] PPP BSD Compression module registered [ 1.158151] PPP Deflate Compression module registered [ 1.158166] PPP MPPE Compression module registered [ 1.158171] NET: Registered protocol family 24 [ 1.158221] usbcore: registered new interface driver r8152 [ 1.158262] usbcore: registered new interface driver asix [ 1.158305] usbcore: registered new interface driver ax88179_178a [ 1.158343] usbcore: registered new interface driver cdc_ether [ 1.158377] usbcore: registered new interface driver net1080 [ 1.158410] usbcore: registered new interface driver cdc_subset [ 1.158447] usbcore: registered new interface driver zaurus [ 1.158491] usbcore: registered new interface driver cdc_ncm [ 1.158628] VFIO - User Level meta-driver version: 0.3 [ 1.159668] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.159680] ehci-pci: EHCI PCI platform driver [ 1.159720] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.159727] ohci-pci: OHCI PCI platform driver [ 1.159763] ohci-platform: OHCI generic platform driver [ 1.161828] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.166808] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.166951] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244 [ 1.167894] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f97a1c00 id [ 1.169410] usbcore: registered new interface driver uas [ 1.169453] usbcore: registered new interface driver usb-storage [ 1.169523] usbcore: registered new interface driver usbserial [ 1.171361] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release [ 1.171395] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.171417] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.172129] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.172164] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.172319] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.172325] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.172330] usb usb1: Product: xHCI Host Controller [ 1.172335] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.172339] usb usb1: SerialNumber: 70090000.xusb [ 1.173612] hub 1-0:1.0: USB hub found [ 1.173647] hub 1-0:1.0: 5 ports detected [ 1.174222] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.174237] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.174336] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.174436] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.174442] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.174447] usb usb2: Product: xHCI Host Controller [ 1.174451] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.174456] usb usb2: SerialNumber: 70090000.xusb [ 1.174772] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.174898] hub 2-0:1.0: USB hub found [ 1.174931] hub 2-0:1.0: 4 ports detected [ 1.175587] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.175593] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.175802] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.175812] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.175835] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.176077] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.176582] mousedev: PS/2 mouse device common for all mice [ 1.176652] usbcore: registered new interface driver xpad [ 1.269603] tegradc tegradc.0: blank - powerdown [ 1.274132] nvme0n1: p1 [ 1.274192] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.278304] usb usb2: usb_suspend_both: status 0 [ 1.306653] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.308816] rtc rtc1: alarm rtc device [ 1.308830] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.308847] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.309250] i2c /dev entries driver [ 1.311038] i2c i2c-6: Added multiplexed i2c bus 7 [ 1.311347] i2c i2c-6: Added multiplexed i2c bus 8 [ 1.311351] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 1.311935] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.319261] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 1.319264] Extcon AUX1(HDMI) disable [ 1.335205] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.335271] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.335335] imx219 7-0010: board setup failed [ 1.335386] imx219: probe of 7-0010 failed with error -121 [ 1.335881] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.359140] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.359205] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.359271] imx219 8-0010: board setup failed [ 1.359321] imx219: probe of 8-0010 failed with error -121 [ 1.360375] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.362434] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.362439] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.362737] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.362749] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.362756] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.362878] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.362887] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.362893] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.363035] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.363043] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.363048] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.363220] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.363785] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.363830] tegra_aotag tegra-aotag: Invalid temp readout [ 1.363850] tegra_aotag tegra-aotag: Invalid temp readout [ 1.363865] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.363874] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.364620] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.364633] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.364772] tegra_aotag tegra-aotag: Invalid temp readout [ 1.364793] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.365136] parse_throttle_dt_data: Num cap clks = 6 [ 1.365140] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.365146] parse_throttle_dt_data: clk=gpu type=4 [ 1.365165] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.365186] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.365209] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.365212] parse_throttle_dt_data: clk=emc type=3 [ 1.365562] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.365655] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.365762] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.366405] FAN dev name: pwm-fan [ 1.366448] FAN:gpio request success. [ 1.366489] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.366736] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.366853] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.366859] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.366929] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.366933] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.366937] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.366941] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.366945] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.366949] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.366953] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.366956] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.366960] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.366964] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.368997] device-mapper: uevent: version 1.0.3 [ 1.369601] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.372223] tegra210-cpufreq cpufreq: probe()...completed [ 1.373006] sdhci: Secure Digital Host Controller Interface driver [ 1.373007] sdhci: Copyright(c) Pierre Ossman [ 1.373009] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.373367] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 1.380663] tegra-se 70012000.se: tegra_se_probe: complete [ 1.381198] hidraw: raw HID events driver (C) Jiri Kosina [ 1.382356] usbcore: registered new interface driver usbhid [ 1.382358] usbhid: USB HID core driver [ 1.384432] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.384604] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.386711] nvpmodel: initialized successfully [ 1.387691] usbcore: registered new interface driver snd-usb-audio [ 1.387749] No Device Node present for smmu client: snd-soc-dummy !! [ 1.387753] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.387771] iommu: Adding device snd-soc-dummy to group 40 [ 1.399973] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.403025] OPE platform probe [ 1.403114] OPE platform probe successful [ 1.403370] OPE platform probe [ 1.403459] OPE platform probe successful [ 1.410842] tegradc tegradc.0: unblank [ 1.414148] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 1.425691] tegradc tegradc.0: nominal-pclk:533250000 parent:533250000 div:1.0 pclk:533250000 527917500~581242500 [ 1.425745] tegradc tegradc.0: hdmi: tmds rate:533250K prod-setting:prod_c_hdmi_300m_600m [ 1.426755] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.427452] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.427569] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.427687] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.427800] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.427915] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.428037] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.428151] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.428263] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.428375] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.428490] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.440610] u32 classifier [ 1.440612] Actions configured [ 1.440680] Initializing XFRM netlink socket [ 1.441395] NET: Registered protocol family 10 [ 1.442101] NET: Registered protocol family 17 [ 1.442111] NET: Registered protocol family 15 [ 1.442182] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.442280] Bluetooth: RFCOMM socket layer initialized [ 1.442290] Bluetooth: RFCOMM ver 1.11 [ 1.442294] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.442299] Bluetooth: HIDP socket layer initialized [ 1.442315] 9pnet: Installing 9P2000 support [ 1.442354] Key type dns_resolver registered [ 1.442753] Registered cp15_barrier emulation handler [ 1.442758] Registered setend emulation handler [ 1.443845] registered taskstats version 1 [ 1.444462] Adding domain ve2-pd to PM domain host1x-pd [ 1.444696] Adding domain ve-pd to PM domain host1x-pd [ 1.446680] isp 54600000.isp: initialized [ 1.447577] isp 54680000.isp: initialized [ 1.457786] last reset is due to software reset [ 1.457789] KERNEL: PMC reset status reg: 0x3 [ 1.457846] BL: PMC reset status reg: 0x3 [ 1.457848] BL: PMIC poweroff Event Recorder: 0x0 [ 1.459350] clk_cbus_recalc_rate: no gbus parent [ 1.459354] clk_cbus_round_rate: no gbus parent [ 1.459356] clk_cbus_round_rate: no gbus parent [ 1.459362] clk_cbus_recalc_rate: no gbus parent [ 1.459465] clk_cbus_recalc_rate: no gbus parent [ 1.459467] clk_cbus_round_rate: no gbus parent [ 1.459469] clk_cbus_round_rate: no gbus parent [ 1.459472] clk_cbus_recalc_rate: no gbus parent [ 1.460137] tegra_dvfs: GPU-cap: registered [ 1.460192] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.460194] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled [ 1.460196] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled [ 1.461504] tegra_dvfs: vdd-gpu-vts: registered [ 1.461882] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.462540] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.463065] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.466461] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.470864] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.475086] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 1.475322] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 1.479487] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.481706] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 1.494246] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.494269] Extcon AUX1(HDMI) enable [ 1.494794] tegra_rtc 7000e000.rtc: setting system clock to 2022-09-14 14:08:01 UTC (1663164481) [ 1.495790] vi 54080000.vi: vi_probe: ++ [ 1.497971] vi 54080000.vi: initialized [ 1.500055] vi 54080000.vi: subdev nvcsi--2 bound [ 1.500155] vi 54080000.vi: subdev nvcsi--1 bound [ 1.500382] mmcblk mmc0:0001: Card claimed for testing. [ 1.501643] Disable partitions left on by BL [ 1.501646] disb [ 1.501693] bwmgr: missing cdev-type property [ 1.501786] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.501791] DRAM derating cdev registered. [ 1.502098] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.502665] ALSA device list: [ 1.502667] #0: tegra-hda at 0x70038000 irq 82 [ 1.502669] #1: tegra-snd-t210ref-mobile-rt565x [ 1.510359] tegradc tegradc.0: sync windows ret = 246 [ 1.543318] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489 [ 1.543322] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.543325] usb 1-2: Product: 4-Port USB 2.0 Hub [ 1.543328] usb 1-2: Manufacturer: Generic [ 1.544940] hub 1-2:1.0: USB hub found [ 1.545935] hub 1-2:1.0: 4 ports detected [ 1.581919] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.581922] Extcon HDMI: HPD enabled [ 1.581935] tegradc tegradc.0: hdmi: plugged [ 1.585208] Freeing unused kernel memory: 8640K [ 1.609624] Root device found: mmcblk0p1 [ 1.611282] Found dev node: /dev/mmcblk0p1 [ 1.631591] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.633442] Rootfs mounted over mmcblk0p1 [ 1.648137] Switching from initrd to actual rootfs [ 1.654971] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 1.691659] usb 2-1: New USB device found, idVendor=0bda, idProduct=0489 [ 1.691666] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.691669] usb 2-1: Product: 4-Port USB 3.0 Hub [ 1.691673] usb 2-1: Manufacturer: Generic [ 1.696403] hub 2-1:1.0: USB hub found [ 1.698153] hub 2-1:1.0: 4 ports detected [ 1.745500] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.756791] cgroup: cgroup2: unknown option "nsdelegate" [ 1.768579] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.769366] systemd[1]: Detected architecture arm64. [ 1.791179] systemd[1]: Set hostname to . [ 1.870096] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 1.870105] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 1.966378] random: systemd: uninitialized urandom read (16 bytes read) [ 1.966409] systemd[1]: Reached target User and Group Name Lookups. [ 1.966627] random: systemd: uninitialized urandom read (16 bytes read) [ 1.968191] systemd[1]: Created slice System Slice. [ 1.968250] random: systemd: uninitialized urandom read (16 bytes read) [ 1.968412] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 1.968606] systemd[1]: Listening on udev Control Socket. [ 1.968722] systemd[1]: Listening on udev Kernel Socket. [ 2.031906] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.091875] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 2.102117] tegra_cec 70015000.tegra_cec: physical address: 10:00. [ 2.155703] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: errors=remount-ro,discard [ 2.166642] tegra_cec 70015000.tegra_cec: Sent res: -113. [ 2.166648] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.218240] systemd-journald[2038]: Received SIGTERM from PID 1 (systemd). [ 2.230309] FAN rising trip_level:1 cur_temp:55500 trip_temps[2]:61000 [ 2.250295] systemd: 38 output lines suppressed due to ratelimiting [ 2.258096] usb 1-2.1: new high-speed USB device number 3 using tegra-xusb [ 2.279025] usb 1-2.1: New USB device found, idVendor=13b1, idProduct=0045 [ 2.279030] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.279034] usb 1-2.1: Product: WUSB6300 V2 [ 2.279037] usb 1-2.1: Manufacturer: Linksys [ 2.279040] usb 1-2.1: SerialNumber: 123456 [ 2.327823] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.328626] systemd[1]: Detected architecture arm64. [ 2.331264] systemd[1]: Set hostname to . [ 2.358185] usb 1-2.3: new low-speed USB device number 4 using tegra-xusb [ 2.386698] usb 1-2.3: New USB device found, idVendor=17ef, idProduct=6099 [ 2.386704] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.386707] usb 1-2.3: Product: Lenovo Traditional USB Keyboard [ 2.386709] usb 1-2.3: Manufacturer: LiteOn [ 2.391871] input: LiteOn Lenovo Traditional USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.3/1-2.3:1.0/0003:17EF:6099.0001/input/input2 [ 2.395663] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.413000] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.450588] hid-generic 0003:17EF:6099.0001: input,hidraw0: USB HID v1.11 Keyboard [LiteOn Lenovo Traditional USB Keyboard] on usb-70090000.xusb-2.3/input0 [ 2.456056] input: LiteOn Lenovo Traditional USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.3/1-2.3:1.1/0003:17EF:6099.0002/input/input3 [ 2.486410] usb 2-1.2: new SuperSpeed USB device number 3 using tegra-xusb [ 2.507031] usb 2-1.2: New USB device found, idVendor=8086, idProduct=0b3a [ 2.507037] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.507040] usb 2-1.2: Product: Intel(R) RealSense(TM) Depth Camera 435i [ 2.507044] usb 2-1.2: Manufacturer: Intel(R) RealSense(TM) Depth Camera 435i [ 2.507047] usb 2-1.2: SerialNumber: 035323050773 [ 2.514733] hid-generic 0003:17EF:6099.0002: input,hidraw1: USB HID v1.11 Device [LiteOn Lenovo Traditional USB Keyboard] on usb-70090000.xusb-2.3/input1 [ 2.536314] systemd[1]: Started Journal Service. [ 2.545073] systemd[1]: systemd-udevd.service: Failed with result 'protocol'. [ 2.594090] usb 1-2.4: new full-speed USB device number 5 using tegra-xusb [ 2.606430] systemd[1]: Started Apply Kernel Variables. [ 2.606840] systemd[1]: Mounted Kernel Configuration File System. [ 2.607158] systemd[1]: systemd-udev-trigger.service: Main process exited, code=killed, status=15/TERM [ 2.618529] usb 1-2.4: New USB device found, idVendor=1532, idProduct=0098 [ 2.618534] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.618537] usb 1-2.4: Product: Razer DeathAdder Essential [ 2.618540] usb 1-2.4: Manufacturer: Razer [ 2.620736] input: Razer Razer DeathAdder Essential as /devices/70090000.xusb/usb1/1-2/1-2.4/1-2.4:1.0/0003:1532:0098.0004/input/input4 [ 2.621063] hid-generic 0003:1532:0098.0004: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder Essential] on usb-70090000.xusb-2.4/input0 [ 2.624099] input: Razer Razer DeathAdder Essential as /devices/70090000.xusb/usb1/1-2/1-2.4/1-2.4:1.1/0003:1532:0098.0005/input/input5 [ 2.686435] hid-generic 0003:1532:0098.0005: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer DeathAdder Essential] on usb-70090000.xusb-2.4/input1 [ 2.687819] input: Razer Razer DeathAdder Essential as /devices/70090000.xusb/usb1/1-2/1-2.4/1-2.4:1.2/0003:1532:0098.0006/input/input6 [ 2.721006] systemd-journald[2868]: Received request to flush runtime journal from PID 1 [ 2.747129] hid-generic 0003:1532:0098.0006: input,hidraw4: USB HID v1.11 Keyboard [Razer Razer DeathAdder Essential] on usb-70090000.xusb-2.4/input2 [ 3.551750] uvcvideo: Found UVC 1.50 device Intel(R) RealSense(TM) Depth Camera 435i (8086:0b3a) [ 3.577330] uvcvideo: Unable to create debugfs 2-3 directory. [ 3.577551] uvcvideo 2-1.2:1.0: Entity type for entity Intel(R) RealSense(TM) Depth Ca was not initialized! [ 3.598196] using random self ethernet address [ 3.598199] using random host ethernet address [ 3.612482] uvcvideo 2-1.2:1.0: Entity type for entity Processing 2 was not initialized! [ 3.621528] uvcvideo 2-1.2:1.0: Entity type for entity Camera 1 was not initialized! [ 3.629866] input: Intel(R) RealSense(TM) Depth Ca as /devices/70090000.xusb/usb2/2-1/2-1.2/2-1.2:1.0/input/input7 [ 3.630405] uvcvideo: Found UVC 1.50 device Intel(R) RealSense(TM) Depth Camera 435i (8086:0b3a) [ 3.634476] uvcvideo: Unable to create debugfs 2-3 directory. [ 3.634632] uvcvideo 2-1.2:1.3: Entity type for entity Processing 7 was not initialized! [ 3.643850] uvcvideo 2-1.2:1.3: Entity type for entity Extension 8 was not initialized! [ 3.653258] uvcvideo 2-1.2:1.3: Entity type for entity Camera 6 was not initialized! [ 3.663263] usbcore: registered new interface driver uvcvideo [ 3.663266] USB Video Class driver (1.1.1) [ 3.809341] random: crng init done [ 3.812774] random: 7 urandom warning(s) missed due to ratelimiting [ 4.383138] Mass Storage Function, version: 2009/09/11 [ 4.383144] LUN: removable file: (no medium) [ 4.393148] using random self ethernet address [ 4.408812] using random host ethernet address [ 4.437278] rndis0: HOST MAC fa:24:8d:c0:cd:e0 [ 4.437554] rndis0: MAC fa:24:8d:c0:cd:e1 [ 4.439883] usb0: HOST MAC fa:24:8d:c0:cd:e2 [ 4.440229] usb0: MAC fa:24:8d:c0:cd:e3 [ 4.440252] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 4.442992] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 4.443012] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 4.443059] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.443341] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.443362] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 4.443871] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 4.443882] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.444111] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.449059] l4tbr0: port 1(rndis0) entered blocking state [ 4.449064] l4tbr0: port 1(rndis0) entered disabled state [ 4.449255] device rndis0 entered promiscuous mode [ 4.466299] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 4.471610] l4tbr0: port 2(usb0) entered blocking state [ 4.471616] l4tbr0: port 2(usb0) entered disabled state [ 4.480544] device usb0 entered promiscuous mode [ 4.492814] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 4.739757] zram: Added device: zram0 [ 4.740185] zram: Added device: zram1 [ 4.740601] zram: Added device: zram2 [ 4.740993] zram: Added device: zram3 [ 4.763225] zram0: detected capacity change from 0 to 518537216 [ 4.803391] Adding 506380k swap on /dev/zram0. Priority:5 extents:1 across:506380k SS [ 4.813135] zram1: detected capacity change from 0 to 518537216 [ 4.841577] Adding 506380k swap on /dev/zram1. Priority:5 extents:1 across:506380k SS [ 4.861324] zram2: detected capacity change from 0 to 518537216 [ 4.894757] Adding 506380k swap on /dev/zram2. Priority:5 extents:1 across:506380k SS [ 4.918727] zram3: detected capacity change from 0 to 518537216 [ 4.947384] Adding 506380k swap on /dev/zram3. Priority:5 extents:1 across:506380k SS [ 5.392495] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.401373] eth0: 0xffffff800a4aa000, 48:b0:2d:69:e2:68, IRQ 406 [ 5.419978] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.420002] cpu-throttle-alert cooling device registered. [ 5.426418] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.426438] gpu-throttle-alert cooling device registered. [ 5.426622] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.426635] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.426649] hot-surface-alert cooling device registered. [ 5.484759] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.640233] Bridge firewalling registered [ 5.687501] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.852408] tegradc tegradc.0: unblank [ 5.852669] tegradc tegradc.1: blank - powerdown [ 6.026127] usb 2-1.2: usb_suspend_both: status 0 [ 6.074123] usb 2-1: usb_suspend_both: status 0 [ 6.074294] usb usb2: usb_suspend_both: status 0 [ 6.138641] Netfilter messages via NETLINK v0.30. [ 6.140600] ctnetlink v0.93: registering with nfnetlink. [ 6.561743] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 7.244895] hid-sensor-hub 0003:8086:0B3A.0003: No report with id 0xffffffff found [ 7.262950] hid-sensor-hub 0003:8086:0B3A.0003: No report with id 0xffffffff found [ 7.338158] hid-sensor-hub 0003:8086:0B3A.0003: No report with id 0xffffffff found [ 7.349201] hid-sensor-hub 0003:8086:0B3A.0003: No report with id 0xffffffff found [ 7.883322] fuse init (API version 7.26) [ 8.302150] hid-sensor-hub 0003:8086:0B3A.0003: No report with id 0xffffffff found [ 8.534646] r8168: eth0: link up [ 8.534679] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.151401] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.151411] Bluetooth: BNEP socket layer initialized [ 11.176094] tegradc tegradc.0: unblank [ 11.176105] tegradc tegradc.1: blank - powerdown [ 12.151994] hid-sensor-hub 0003:8086:0B3A.0003: No report with id 0xffffffff found [ 13.439973] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 19.018397] usb 2-1.2: usb_suspend_both: status 0 [ 19.074683] usb 2-1: usb_suspend_both: status 0 [ 19.075088] usb usb2: usb_suspend_both: status 0 [ 31.864715] vdd-usb-vbus: disabling [ 31.864755] vdd-usb-vbus2: disabling [ 31.864835] vddio-sdmmc-ap: disabling [ 31.865464] vddio-sdmmc3-ap: disabling [ 31.866016] vdd-3v3-sd: disabling [ 31.866058] avdd-io-edp-1v05: disabling [ 31.866435] vdd-usb-hub-en: disabling