[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (michael@michael-System-Product-Name) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #46 SMP PREEMPT Thu Aug 29 17:45:30 CST 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefcc000 s61592 r8192 d32616 u102400 [ 0.000000] pcpu-alloc: s61592 r8192 d32616 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 quiet [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29500(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3979856K/4159488K available (15230K kernel code, 2914K rwdata, 6564K rodata, 8576K init, 609K bss, 114096K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f60000 ( 15232 KB) [ 0.000000] .rodata : 0xffffff8008f60000 - 0xffffff80095d0000 ( 6592 KB) [ 0.000000] .init : 0xffffff80095d0000 - 0xffffff8009e30000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e30000 - 0xffffff800a108808 ( 2915 KB) [ 0.000000] .bss : 0xffffff800a108808 - 0xffffff800a1a0dbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.002069] Console: colour dummy device 80x25 [ 0.002080] console [tty0] enabled [ 0.002088] kmemleak: Kernel memory leak detector disabled [ 0.002100] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.002110] pid_max: default: 32768 minimum: 301 [ 0.002516] Security Framework initialized [ 0.002722] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002729] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003492] ftrace: allocating 46935 entries in 184 pages [ 0.160782] sched-energy: CPU device node has no sched-energy-costs [ 0.160797] ASID allocator initialised with 65536 entries [ 0.198430] tegra-id: chipid=22117. [ 0.198438] tegra-id: opt_subrevision=0. [ 0.198453] Tegra Speedo/IDDQ fuse revision 4 [ 0.198457] Tegra: CPU Speedo ID 7, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.198461] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.198466] Tegra: CPU Speedo Value 2004, SoC Speedo Value 1891, GPU Speedo Value 2016 [ 0.198470] Tegra: CPU IDDQ Value 1720, SoC IDDQ Value 1900, GPU IDDQ Value 2380 [ 0.198485] Tegra Revision: A02 SKU: 0x17 CPU Process: 0 SoC Process: 0 [ 0.198493] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/jetson/kernel-dts/tegra210-jetson-tx1-p2597-2180-a01-devkit.dts [ 0.198500] DTB Build time: Aug 30 2019 09:59:21 [ 0.248618] CPU1: Booted secondary processor [411fd071] [ 0.280596] CPU2: Booted secondary processor [411fd071] [ 0.312584] CPU3: Booted secondary processor [411fd071] [ 0.312651] Brought up 4 CPUs [ 0.312655] SMP: Total of 4 processors activated. [ 0.312662] CPU features: detected feature: 32-bit EL0 Support [ 0.312889] CPU: All CPU(s) started at EL2 [ 0.312904] alternatives: patching kernel code [ 0.317949] devtmpfs: initialized [ 0.369725] Initilizing CustomIPI irq domain [ 0.369950] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.369963] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.371027] pinctrl core: initialized pinctrl subsystem [ 0.371245] OS set in device tree is not L4T. [ 0.371456] regulator-dummy: no parameters [ 0.371638] Initializing plugin-manager [ 0.371707] Plugin module not found [ 0.372969] node /plugin-manager/fragement@0 match with board >=2180-1000-300 [ 0.374065] node /plugin-manager/fragement@5 match with odm-data enable-tegra-wdt [ 0.374510] node /plugin-manager/fragement@7 match with odm-data enable-tegra-wdt [ 0.376675] NET: Registered protocol family 16 [ 0.377715] persistent_ram: found existing invalid buffer, size 0, start 1024 [ 0.377736] persistent_ram: found existing invalid buffer, size 0, start 32 [ 0.377817] persistent_ram: found existing invalid buffer, size 134225920, start 65536 [ 0.377844] pstore: using zlib compression [ 0.377862] console [pstore-1] enabled [ 0.377866] pstore: Registered ramoops as persistent store backend [ 0.377871] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.392185] cpuidle: using governor menu [ 0.395784] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.397621] vdso: 2 pages (1 code @ ffffff8008f67000, 1 data @ ffffff8009e34000) [ 0.397634] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.399765] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.402616] tegra_powergate_init: DONE [ 0.402625] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/jetson/kernel-dts/tegra210-jetson-tx1-p2597-2180-a01-devkit.dts [ 0.402631] DTB Build time: Aug 30 2019 09:59:21 [ 0.404442] Tegra reboot handler registered. [ 0.408102] iommu: Adding device tegra-carveouts to group 0 [ 0.408191] platform tegra-carveouts: domain=ffffffc0f954af18 allocates as[0]=ffffffc0f95640a8 [ 0.408436] iommu: Adding device smmu_test to group 1 [ 0.408477] platform smmu_test: domain=ffffffc0f9556198 allocates as[0]=ffffffc0f9564110 [ 0.409130] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.409184] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.409242] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.409250] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.409260] mc-err: mcerr ops are set to t21x [ 0.418401] iommu: Adding device 70090000.xusb to group 2 [ 0.418650] iommu: Adding device 70006000.serial to group 3 [ 0.418702] platform 70006000.serial: domain=ffffffc0f9620798 allocates as[0]=ffffffc0f9564178 [ 0.419026] iommu: Adding device 70006040.serial to group 4 [ 0.419258] iommu: Adding device 70006200.serial to group 5 [ 0.419498] iommu: Adding device 70006300.serial to group 6 [ 0.419659] iommu: Adding device sound to group 7 [ 0.419694] platform sound: domain=ffffffc0f9620e58 allocates as[0]=ffffffc0f95641e0 [ 0.420133] iommu: Adding device 7000d400.spi to group 8 [ 0.420378] iommu: Adding device 7000da00.spi to group 9 [ 0.420689] iommu: Adding device 50000000.host1x to group 10 [ 0.420943] iommu: Adding device 54080000.vi to group 11 [ 0.421301] iommu: Adding device 54600000.isp to group 12 [ 0.421548] iommu: Adding device 54680000.isp to group 13 [ 0.421819] iommu: Adding device tegradc.0 to group 14 [ 0.421855] platform tegradc.0: domain=ffffffc0f963dc18 allocates as[0]=ffffffc0f9564248 [ 0.422180] iommu: Adding device tegradc.1 to group 15 [ 0.422217] platform tegradc.1: domain=ffffffc0f963de58 allocates as[0]=ffffffc0f95642b0 [ 0.422472] iommu: Adding device 54340000.vic to group 16 [ 0.422661] iommu: Adding device 544c0000.nvenc to group 17 [ 0.422837] iommu: Adding device 54500000.tsec to group 18 [ 0.423011] iommu: Adding device 54100000.tsecb to group 19 [ 0.423200] iommu: Adding device 54480000.nvdec to group 20 [ 0.423385] iommu: Adding device 54380000.nvjpg to group 21 [ 0.424348] iommu: Adding device 546c0000.i2c to group 22 [ 0.424670] iommu: Adding device 57000000.gpu to group 23 [ 0.424705] platform 57000000.gpu: domain=ffffffc0f9648e58 allocates as[0]=ffffffc0f9564318 [ 0.424733] platform 57000000.gpu: domain=ffffffc0f9648e58 allocates as[1]=ffffffc0f9564380 [ 0.424762] platform 57000000.gpu: domain=ffffffc0f9648e58 allocates as[2]=ffffffc0f95643e8 [ 0.424791] platform 57000000.gpu: domain=ffffffc0f9648e58 allocates as[3]=ffffffc0f9564450 [ 0.425392] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.425402] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.425411] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.425415] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.425418] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.480746] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.480751] tegra-pmc: Clear bootloader IO dpd settings [ 0.480769] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.480816] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.481051] iommu: Adding device 70012000.se to group 24 [ 0.481553] iommu: Adding device 1003000.pcie to group 25 [ 0.481590] platform 1003000.pcie: domain=ffffffc0f96df618 allocates as[0]=ffffffc0f95644b8 [ 0.481911] iommu: Adding device 7000c000.i2c to group 26 [ 0.482148] iommu: Adding device 7000c400.i2c to group 27 [ 0.482392] iommu: Adding device 7000c500.i2c to group 28 [ 0.482622] iommu: Adding device 7000c700.i2c to group 29 [ 0.482854] iommu: Adding device 7000d000.i2c to group 30 [ 0.483085] iommu: Adding device 7000d100.i2c to group 31 [ 0.483326] iommu: Adding device sdhci-tegra.3 to group 32 [ 0.483360] platform sdhci-tegra.3: domain=ffffffc0f96ed198 allocates as[0]=ffffffc0f9564520 [ 0.483865] iommu: Adding device sdhci-tegra.0 to group 33 [ 0.483900] platform sdhci-tegra.0: domain=ffffffc0f96ed498 allocates as[0]=ffffffc0f9564588 [ 0.484561] iommu: Adding device 700d0000.xudc to group 34 [ 0.487032] iommu: Adding device 70027000.sata to group 35 [ 0.489255] vdd-ac-bat: 5000 mV [ 0.490232] vdd-cpu-fixed: 1000 mV [ 0.517218] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.519026] GPIO line 58 (wlan-default-input) hogged as input [ 0.519043] GPIO line 65 (wlan-default-input) hogged as input [ 0.519063] GPIO line 56 (wlan-default-output-high) hogged as output/high [ 0.519079] GPIO line 64 (wlan-default-output-high) hogged as output/high [ 0.519094] GPIO line 66 (wlan-default-output-high) hogged as output/high [ 0.519112] GPIO line 148 (camera-control-output-low) hogged as output/low [ 0.519127] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.519141] GPIO line 149 (camera-control-output-low) hogged as output/low [ 0.519156] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.519380] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.526175] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.526424] SCSI subsystem initialized [ 0.526588] libata version 3.00 loaded. [ 0.526819] usbcore: registered new interface driver usbfs [ 0.526860] usbcore: registered new interface driver hub [ 0.526921] usbcore: registered new device driver usb [ 0.529364] gpiochip_setup_dev: registered GPIOs 496 to 511 on device: gpiochip1 (tca9539) [ 0.530953] gpiochip_setup_dev: registered GPIOs 480 to 495 on device: gpiochip2 (tca9539) [ 0.533222] max77620 4-003c: PMIC Version OTP:0x3C and ES:0x8 [ 0.536599] random: fast init done [ 0.536742] vdd-core: 600 <--> 1400 mV at 1125 mV [ 0.540719] vddio-ddr: at 1125 mV [ 0.541241] vdd-pre-reg: 1350 mV [ 0.544612] vdd-1v8: 1800 mV [ 0.548642] avdd-sys: 1200 mV [ 0.552613] vdd-pex: 1050 mV [ 0.553031] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.553501] vdd-cam-hv: Bringing 3100000uV into 2800000-2800000uV [ 0.553574] vdd-cam-hv: 2800 mV [ 0.554061] vdd-rtc: Bringing 1000000uV into 850000-850000uV [ 0.556615] vdd-rtc: 850 mV [ 0.557123] avdd-ts-hv: Bringing 3100000uV into 3300000-3300000uV [ 0.557193] avdd-ts-hv: 3300 mV [ 0.557698] vdd-ts: Bringing 2800000uV into 1800000-1800000uV [ 0.557776] vdd-ts: 1800 mV [ 0.560613] vdd-gen-pll-edp: 1050 mV [ 0.564616] vdd-hdmi-dp: 1050 mV [ 0.565529] GPIO line 474 (spmic-default-output-high) hogged as output/high [ 0.565716] gpiochip_setup_dev: registered GPIOs 472 to 479 on device: gpiochip3 (max77620-gpio) [ 0.566931] max77620 4-003c: max77620 probe successful [ 0.568835] media: Linux media interface: v0.10 [ 0.568873] Linux video capture interface: v2.00 [ 0.569602] pps_core: LinuxPPS API ver. 1 registered [ 0.569605] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.569623] PTP clock support registered [ 0.572342] tegra_fiq_debugger_init: found FIQ source (IRQ 100) [ 0.580580] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.581143] Advanced Linux Sound Architecture Driver Initialized. [ 0.581572] Bluetooth: Core ver 2.22 [ 0.581604] NET: Registered protocol family 31 [ 0.581607] Bluetooth: HCI device and connection manager initialized [ 0.581616] Bluetooth: HCI socket layer initialized [ 0.581622] Bluetooth: L2CAP socket layer initialized [ 0.581639] Bluetooth: SCO socket layer initialized [ 0.582917] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.582932] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.582974] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.582988] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.585617] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.588212] vdd-3v3: 3300 mV [ 0.589144] max77620-gpio7: supplied by vdd-gen-pll-edp [ 0.592183] max77620-gpio7: 1050 mV [ 0.592536] lcd-bl-en: 1800 mV [ 0.592945] en-vdd-sd: supplied by vdd-3v3 [ 0.592970] en-vdd-sd: 3300 mV [ 0.593533] en-vdd-cam: 1800 mV [ 0.596189] vdd-sys-boost: 5000 mV [ 0.596761] vdd-hdmi: 5000 mV [ 0.597075] aux-3v3: 3300 mV [ 0.597373] snsr_pm: 3300 mV [ 0.600190] vdd-disp-3v0: 3000 mV [ 0.600784] vdd-fan: 5000 mV [ 0.601209] usb-vbus1: supplied by vdd-3v3 [ 0.601234] usb-vbus1: 5000 mV [ 0.601846] en-vdd-ts-1v8: 1800 mV [ 0.602442] en-vdd-ts-hv-3v3: 3300 mV [ 0.603148] en-vdd-disp-3v3: 3300 mV [ 0.603754] en-mdm-pwr-3v7: 3700 mV [ 0.604480] en-vdd-disp-1v8: 1800 mV [ 0.605116] en-vdd-cam-hv-2v8: 2800 mV [ 0.605522] rtl-5v0: 5000 mV [ 0.605916] en-usb-vbus2: 5000 mV [ 0.606624] en-vdd-cam-1v2: supplied by vdd-3v3 [ 0.606649] en-vdd-cam-1v2: 1200 mV [ 0.607112] en-vdd-vcm-2v8: supplied by vdd-3v3 [ 0.607146] en-vdd-vcm-2v8: 2800 mV [ 0.607853] en-vdd-cam-1v2-alt: supplied by vdd-3v3 [ 0.607877] en-vdd-cam-1v2-alt: 1200 mV [ 0.608995] camchar: rtcpu character device driver loaded [ 0.610444] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:2 [ 0.611650] clocksource: Switched to clocksource arch_sys_counter [ 0.641728] VFS: Disk quotas dquot_6.6.0 [ 0.641820] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.642133] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.642338] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.642344] nvmap_page_pool_init: Total RAM pages: 1011348 [ 0.642348] nvmap_page_pool_init: nvmap page pool size: 126418 pages (493 MB) [ 0.642424] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.642597] misc nvmap: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.642698] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.649565] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.651062] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.651361] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.651488] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.652645] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tdiode_tegra [ 0.652814] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type PMIC-Die [ 0.653011] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type Tboard_tegra [ 0.653170] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.653173] pre_t19x_iso_plat_init(): max_iso_bw=33280000KB [ 0.653557] NET: Registered protocol family 2 [ 0.654345] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.654549] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.654941] TCP: Hash tables configured (established 32768 bind 32768) [ 0.655004] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.655082] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.655413] NET: Registered protocol family 1 [ 0.655965] RPC: Registered named UNIX socket transport module. [ 0.655969] RPC: Registered udp transport module. [ 0.655973] RPC: Registered tcp transport module. [ 0.655976] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.655984] PCI: CLS 0 bytes, default 64 [ 0.656133] Trying to unpack rootfs image as initramfs... [ 0.885556] Freeing initrd memory: 5432K [ 0.893380] host1x 50000000.host1x: initialized [ 0.894779] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.897276] audit: initializing netlink subsys (disabled) [ 0.897320] audit: type=2000 audit(0.755:1): initialized [ 0.897869] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.906698] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.908025] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.908695] 9p: Installing v9fs 9p2000 file system support [ 0.911487] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.911578] io scheduler noop registered [ 0.911863] io scheduler cfq registered (default) [ 0.913737] gic 702f9000.agic: GIC IRQ controller registered [ 0.916713] iommu: Adding device 702ef000.adsp to group 36 [ 0.923182] iommu: Adding device aconnect@702c0000:adsp_audio to group 37 [ 0.923307] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.923878] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x8228c12 [ 0.923885] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.925114] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.925206] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.925289] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.925444] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-hsic.3, lane = hsic-0, function = xusb [ 0.925591] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-0, function = pcie-x1 [ 0.925672] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-1, function = pcie-x4 [ 0.925754] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-2, function = pcie-x4 [ 0.925836] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-3, function = pcie-x4 [ 0.925921] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-4, function = pcie-x4 [ 0.926002] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-5, function = xusb [ 0.926086] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.10, lane = pcie-6, function = xusb [ 0.926223] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-sata.11, lane = sata-0, function = sata [ 0.931184] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.932505] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.934032] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.935708] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.935973] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.936796] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.936932] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1020000, vi_iso_bw=750000, max_bw=1020000 [ 0.937142] Adding domain tsec-pd to PM domain host1x-pd [ 0.938983] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 0.939534] tsec 54500000.tsec: initialized [ 0.940628] tsec 54100000.tsecb: initialized [ 0.941409] Adding domain nvdec-pd to PM domain host1x-pd [ 0.944249] nvdec 54480000.nvdec: initialized [ 0.945297] Adding domain vic03-pd to PM domain host1x-pd [ 0.945476] Adding domain msenc-pd to PM domain host1x-pd [ 0.945634] Adding domain nvjpg-pd to PM domain host1x-pd [ 0.949745] falcon 54340000.vic: initialized [ 0.950848] falcon 544c0000.nvenc: initialized [ 0.952091] falcon 54380000.nvjpg: initialized [ 0.956255] tegradc tegradc.0: Michael tegradc of_dc_parse_platform_data [ 0.956323] tegradc tegradc.0: disp0 connected to head0->/host1x/sor [ 0.956402] display board info: id 0xffff, fab 0x0 [ 0.956493] tegradc tegradc.0: No lt-data, using default setting [ 0.956508] Michael tegradc parse_disp_default_out [ 0.956597] tegradc tegradc.0: DT parsed successfully [ 0.956634] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0 [ 0.956852] tegradc tegradc.0: Michael tegradc : tegra_dc_dp_init [ 0.956874] tegradc tegradc.0: Michael tegradc dp->early_enable = false [ 0.956890] tegradc tegradc.0: Michael tegradc !dp->dpaux [ 0.957280] tegradc tegradc.0: Michael tegradc dc->out->type != TEGRA_DC_OUT_FAKE_DP [ 0.957303] tegradc tegradc.0: Michael tegradc hpd_switch_name2 : dp [ 0.957317] tegradc tegradc.0: Michael tegradc tegra_dc_sor_init [ 0.957334] tegradc tegradc.0: Michael tegradc tegra_dc_sor_init sor->ctrl_num : 0 [ 0.957370] tegradc tegradc.0: Michael tegradc sor0 [ 0.957435] Test Michael tegradc : 0 [ 0.957445] Michael tegradc : 0 [ 0.957905] tegradc tegradc.0: Michael tegradc enter sor->pinctrl_sor [ 0.957921] tegradc tegradc.0: dpd enable lookup fail:-19 [ 0.958056] tegradc tegradc.0: Michael tegradc portnum : 0, powergate_id : 17 [ 0.958125] Michael tegradc tegra_hpd_init [ 0.958824] tegradc tegradc.0: probed [ 0.962271] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.965019] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 10 channels [ 0.965488] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 0.965741] kfuse 7000fc00.kfuse: initialized [ 0.967396] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.968181] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 0.968190] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 0.968588] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 0.969500] vdd-gpu: applied init 1000000uV constraint [ 0.969506] vdd-gpu: 710 <--> 1320 mV at 1002 mV [ 0.969930] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 0.973003] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.973072] No Device Node present for smmu client: serial8250 !! [ 0.973078] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 0.973108] iommu: Adding device serial8250 to group 38 [ 0.973282] Console: switching to colour frame buffer device 480x135 [ 0.973942] tegradc tegradc.0: fb registered [ 0.974751] console [ttyS0] disabled [ 0.974783] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 0.977163] Michael tegradc tegra_dpaux_config_pad_mode : 0 [ 0.977163] tegradc tegradc.0: Michael tegradc _tegra_dc_enable [ 0.977168] tegradc tegradc.0: Michael tegradc dc->out->type : 3 1 [ 0.977175] tegradc tegradc.0: Michael is not tegradc tegra_dc_is_nvdisplay [ 0.977178] tegradc tegradc.0: Michael tegradc _tegra_dc_controller_enable [ 1.091648] console [ttyS0] enabled [ 1.092558] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.092919] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.093164] serial-tegra 70006300.serial: RX in PIO mode [ 1.093265] 70006300.serial: ttyTHS3 at MMIO 0x70006300 (irq = 66, base_baud = 0) is a TEGRA_UART [ 1.094185] [drm] Initialized [ 1.102298] brd: module loaded [ 1.106471] loop: module loaded [ 1.106547] tegra_profiler: version: 1.134, samples/io: 47/26 [ 1.106640] tegra_profiler: auth: init [ 1.106975] nct1008_nct72 0-004c: starting parse dt [ 1.107048] nct1008_nct72 0-004c: !!!Found deprecated property!!! [ 1.107055] nct1008_nct72 0-004c: success parsing dt [ 1.107259] nct1008_nct72 0-004c: success in enabling tmp451 VDD rail [ 1.107529] THERMAL EST: found 2 subdevs [ 1.107534] THERMAL EST num_resources: 0 [ 1.107539] [THERMAL EST subdev 0] [ 1.107544] [THERMAL EST subdev 1] [ 1.107917] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 1.107921] THERMAL EST: thz register success. [ 1.108031] THERMAL EST: end of probe, return err: 0 [ 1.108808] hisi_sas: driver version v1.6 [ 1.109845] tegra-ahci 70027000.sata: Missing devslp-active state [ 1.110575] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 1.110585] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 1.111553] scsi host0: tegra_ahci [ 1.112064] scsi host1: tegra_ahci [ 1.112242] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 101 [ 1.112246] ata2: DUMMY [ 1.115825] libphy: Fixed MDIO Bus: probed [ 1.116440] tun: Universal TUN/TAP device driver, 1.6 [ 1.116443] tun: (C) 1999-2004 Max Krasnyansky [ 1.117174] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.117178] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.117220] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.117223] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.117262] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.117264] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.117305] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.117308] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.118168] PPP generic driver version 2.4.2 [ 1.118302] PPP BSD Compression module registered [ 1.118306] PPP Deflate Compression module registered [ 1.118324] PPP MPPE Compression module registered [ 1.118328] NET: Registered protocol family 24 [ 1.118382] usbcore: registered new interface driver r8152 [ 1.118420] usbcore: registered new interface driver asix [ 1.118455] usbcore: registered new interface driver ax88179_178a [ 1.118489] usbcore: registered new interface driver cdc_ether [ 1.118522] usbcore: registered new interface driver net1080 [ 1.118558] usbcore: registered new interface driver cdc_subset [ 1.118592] usbcore: registered new interface driver zaurus [ 1.118635] usbcore: registered new interface driver cdc_ncm [ 1.118763] VFIO - User Level meta-driver version: 0.3 [ 1.119779] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.119792] ehci-pci: EHCI PCI platform driver [ 1.119829] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.119837] ohci-pci: OHCI PCI platform driver [ 1.119877] ohci-platform: OHCI generic platform driver [ 1.122294] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.123281] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.124386] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f95f1000 id [ 1.125769] usbcore: registered new interface driver uas [ 1.125821] usbcore: registered new interface driver usb-storage [ 1.125901] usbcore: registered new interface driver usbserial [ 1.126885] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-05-08 09:42:10 UTC, Version: 50.22 release [ 1.126940] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.126957] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.127840] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.127881] tegra-xusb 70090000.xusb: irq 62, io mem 0x70090000 [ 1.128047] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.128053] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.128058] usb usb1: Product: xHCI Host Controller [ 1.128062] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.128067] usb usb1: SerialNumber: 70090000.xusb [ 1.128567] hub 1-0:1.0: USB hub found [ 1.128605] hub 1-0:1.0: 5 ports detected [ 1.129202] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.129215] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.129296] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.129392] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.129398] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.129402] usb usb2: Product: xHCI Host Controller [ 1.129406] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.129411] usb usb2: SerialNumber: 70090000.xusb [ 1.129805] hub 2-0:1.0: USB hub found [ 1.129837] hub 2-0:1.0: 4 ports detected [ 1.130102] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.131068] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.131091] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.131418] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.131973] mousedev: PS/2 mouse device common for all mice [ 1.132048] usbcore: registered new interface driver xpad [ 1.139520] nct1008_nct72 0-004c: LOC shutdown limit 120 [ 1.140032] nct1008_nct72 0-004c: EXT shutdown limit 105 [ 1.172728] nct1008_nct72 0-004c: initial LOC temp: 40000 [ 1.173022] nct1008_nct72 0-004c: initial EXT temp: 41500 [ 1.173598] nct1008_nct72 0-004c: hi_b:0, lo_b:0 [ 1.174073] nct1008_nct72 0-004c: nct1008_probe: initialized [ 1.231730] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 1.248276] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.250482] rtc rtc1: alarm rtc device [ 1.250496] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.250516] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.250995] i2c /dev entries driver [ 1.253055] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.255213] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.255219] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.255569] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.255597] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.255606] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.255784] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.255794] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.255802] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.255981] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.255986] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature 2147483647 forced to 127000 [ 1.255994] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.255999] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.256284] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.256912] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.256971] tegra_aotag tegra-aotag: Invalid temp readout [ 1.256979] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.256988] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.257862] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.258349] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.258783] parse_throttle_dt_data: Num cap clks = 6 [ 1.258789] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.258797] parse_throttle_dt_data: clk=gpu type=4 [ 1.258829] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.258858] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.258891] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.258895] parse_throttle_dt_data: clk=emc type=3 [ 1.259292] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.259402] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.260136] FAN dev name: pwm-fan [ 1.260177] FAN:gpio request success. [ 1.260231] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.260472] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 1.260592] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.260600] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.260675] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.260681] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.260686] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.260691] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.260696] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.260701] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.260706] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.260711] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.260716] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.260721] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.261189] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds. [ 1.261444] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1) [ 1.262206] device-mapper: uevent: version 1.0.3 [ 1.262604] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.268252] tegra210-cpufreq cpufreq: probe()...completed [ 1.269008] sdhci: Secure Digital Host Controller Interface driver [ 1.269010] sdhci: Copyright(c) Pierre Ossman [ 1.269012] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.269339] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 1.271803] sdhci-tegra sdhci-tegra.1: Client registration for eMC Successful [ 1.275847] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 1.275874] sdhci-tegra sdhci-tegra.0: Got WP GPIO [ 1.276241] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 1.279695] tegra-se 70012000.se: tegra_se_probe: complete [ 1.280327] hidraw: raw HID events driver (C) Jiri Kosina [ 1.281534] usbcore: registered new interface driver usbhid [ 1.281537] usbhid: USB HID core driver [ 1.286475] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.286636] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.288309] nvpmodel: initialized successfully [ 1.289390] usbcore: registered new interface driver snd-usb-audio [ 1.289447] No Device Node present for smmu client: snd-soc-dummy !! [ 1.289451] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.289468] iommu: Adding device snd-soc-dummy to group 39 [ 1.291786] tegradc tegradc.0: Michael tegradc tegra_dc_init [ 1.294744] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.297249] tegradc tegradc.0: Michael tegradc dc->mode.pclk != 0 [ 1.297353] tegradc tegradc.0: nominal-pclk:522090000 parent:522089062 div:1.0 pclk:522089062 516869100~569078100 [ 1.297385] tegradc tegradc.0: Michael tegradc tegra_dc_dp_enable [ 1.303963] Michael tegradc For eDP, driver gets to decide the best mode [ 1.309381] tegra210-i2s tegra210-i2s.0: Missing prop fsync-width for I2S0 [ 1.310674] tegra210-i2s tegra210-i2s.2: Missing prop fsync-width for I2S2 [ 1.311148] tegra210-i2s tegra210-i2s.3: Missing prop fsync-width for I2S3 [ 1.311658] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 1.311857] tegra210-i2s tegra210-i2s.4: Missing prop fsync-width for I2S4 [ 1.314742] Michael tegradc tegra_dp_hpd_op_edid_ready [ 1.315664] mmc1: SDHCI controller on sdhci-tegra.1 [sdhci-tegra.1] using ADMA 64-bit with 64 bit addr [ 1.319841] Micahel tegradc tegra_dp_read_sink_cap [ 1.322286] OPE platform probe [ 1.322358] OPE platform probe successful [ 1.322800] OPE platform probe [ 1.322875] OPE platform probe successful [ 1.323747] mmc2: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 1.324030] tegra-asoc: sound: This is a dummy codec [ 1.327132] tegradc tegradc.0: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.335311] tegradc tegradc.0: Michael tegradc prepare enter tegra_sor_config_dp_clk_t21x [ 1.343505] Michael tegradc For DP on sor0, set pll_dp as parent of sor clock [ 1.346756] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.346889] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.347009] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.347124] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.347239] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.347353] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.347481] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.347597] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.347728] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.347866] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.350532] dp lt: state 0 (Reset), pending_lt_evt 1 [ 1.350540] dp lt: switching from state 0 (Reset) to state 0 (Reset) [ 1.350543] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.352212] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1.352216] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.352652] Michael tegradc set_lt_config [ 1.356516] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1.356531] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1.356554] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1.356571] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1.358835] u32 classifier [ 1.358837] Actions configured [ 1.358900] Initializing XFRM netlink socket [ 1.359561] NET: Registered protocol family 10 [ 1.360188] NET: Registered protocol family 17 [ 1.360222] NET: Registered protocol family 15 [ 1.360289] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.360328] Bluetooth: RFCOMM socket layer initialized [ 1.360336] Bluetooth: RFCOMM ver 1.11 [ 1.360340] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.360344] Bluetooth: HIDP socket layer initialized [ 1.360360] 9pnet: Installing 9P2000 support [ 1.360397] Key type dns_resolver registered [ 1.360798] Registered cp15_barrier emulation handler [ 1.360804] Registered setend emulation handler [ 1.361775] registered taskstats version 1 [ 1.362364] Adding domain ve2-pd to PM domain host1x-pd [ 1.362609] Adding domain ve-pd to PM domain host1x-pd [ 1.380137] dp lt: CR not done [ 1.380791] dp lt: new config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 1.380794] dp lt: new config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 1.380795] dp lt: new config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 1.380797] dp lt: new config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 1.380799] dp lt: CR retry [ 1.380802] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.380806] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.380809] Michael tegradc set_lt_config [ 1.381138] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.381455] mmcblk0: mmc0:0001 016G32 14.7 GiB [ 1.381588] mmcblk0boot0: mmc0:0001 016G32 partition 1 4.00 MiB [ 1.384694] dp lt: config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 1.384709] dp lt: config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 1.384719] dp lt: config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 1.384738] dp lt: config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 1.385697] mmcblk0boot1: mmc0:0001 016G32 partition 2 4.00 MiB [ 1.389857] mmcblk0rpmb: mmc0:0001 016G32 partition 3 4.00 MiB [ 1.391131] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 1.408091] dp lt: CR done [ 1.408095] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1.408100] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.421645] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.426561] ata1: SATA link down (SStatus 0 SControl 300) [ 1.431913] tegradc tegradc.0: dp: aux read defer (0x10020000) -- 6 [ 1.433605] dp lt: CE not done [ 1.434274] dp lt: new config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 1.434276] dp lt: new config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 1.434278] dp lt: new config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 1.434280] dp lt: new config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 1.434282] Michael tegradc set_lt_config [ 1.438132] dp lt: config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 1.438147] dp lt: config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 1.438158] dp lt: config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 1.438168] dp lt: config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 1.439069] dp lt: CE retry [ 1.439072] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 1.439076] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.455692] usb 1-3: new low-speed USB device number 2 using tegra-xusb [ 1.459907] tegradc tegradc.0: dp: aux read defer (0x10020000) -- 6 [ 1.461599] dp lt: CE not done [ 1.462267] dp lt: new config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 1.462269] dp lt: new config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 1.462271] dp lt: new config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 1.462273] dp lt: new config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 1.462274] Michael tegradc set_lt_config [ 1.466119] dp lt: config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 1.466133] dp lt: config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 1.466143] dp lt: config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 1.466153] dp lt: config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 1.467056] dp lt: CE retry [ 1.467059] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 1.467062] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.487907] tegradc tegradc.0: dp: aux read defer (0x10020000) -- 6 [ 1.489600] dp lt: CE not done [ 1.490268] dp lt: new config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 1.490270] dp lt: new config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 1.490272] dp lt: new config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 1.490274] dp lt: new config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 1.490275] Michael tegradc set_lt_config [ 1.494120] dp lt: config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 1.494133] dp lt: config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 1.494144] dp lt: config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 1.494154] dp lt: config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 1.495053] dp lt: CE retry [ 1.495056] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 1.495060] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.497669] usb 1-3: New USB device found, idVendor=04d9, idProduct=1503 [ 1.497673] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.497676] usb 1-3: Product: USB Keyboard [ 1.497678] usb 1-3: Manufacturer: [ 1.509092] input: USB Keyboard as /devices/70090000.xusb/usb1/1-3/1-3:1.0/0003:04D9:1503.0001/input/input1 [ 1.515918] tegradc tegradc.0: dp: aux read defer (0x10020000) -- 6 [ 1.517612] dp lt: CE not done [ 1.518281] dp lt: new config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 1.518283] dp lt: new config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 1.518284] dp lt: new config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 1.518287] dp lt: new config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 1.518288] Michael tegradc set_lt_config [ 1.522134] dp lt: config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 1.522148] dp lt: config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 1.522159] dp lt: config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 1.522170] dp lt: config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 1.523061] dp lt: CE retry [ 1.523064] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 1.523068] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.543914] tegradc tegradc.0: dp: aux read defer (0x10020000) -- 6 [ 1.545606] dp lt: CE not done [ 1.546274] dp lt: new config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 1.546276] dp lt: new config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 1.546278] dp lt: new config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 1.546280] dp lt: new config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 1.546281] Michael tegradc set_lt_config [ 1.550124] dp lt: config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 1.550139] dp lt: config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 1.550150] dp lt: config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 1.550160] dp lt: config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 1.551052] dp lt: CE retry [ 1.551055] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 1.551058] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.559565] mmc1: hw tuning done ... [ 1.563644] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 1.567976] hid-generic 0003:04D9:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-70090000.xusb-3/input0 [ 1.571907] tegradc tegradc.0: dp: aux read defer (0x10020000) -- 6 [ 1.573592] dp lt: CE not done [ 1.574256] dp lt: new config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 1.574259] dp lt: new config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 1.574260] dp lt: new config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 1.574262] dp lt: new config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 1.574264] Michael tegradc set_lt_config [ 1.578117] dp lt: config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 1.578130] dp lt: config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 1.578141] dp lt: config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 1.578151] dp lt: config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 1.579044] dp lt: CE retry [ 1.579047] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 1.579051] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.585754] input: USB Keyboard as /devices/70090000.xusb/usb1/1-3/1-3:1.1/0003:04D9:1503.0002/input/input2 [ 1.599910] tegradc tegradc.0: dp: aux read defer (0x10020000) -- 6 [ 1.601594] dp lt: CE not done [ 1.601596] dp lt: CE retry limit 5 reached [ 1.601599] dp lt: switching from state 3 (channel equalization) to state 7 (reduce lane count) [ 1.601603] dp lt: state 7 (reduce lane count), pending_lt_evt 0 [ 1.603237] dp lt: retry CR, lanes: 2, link rate: 0x14 [ 1.603239] dp lt: switching from state 7 (reduce lane count) to state 2 (clock recovery) [ 1.603242] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.603844] Michael tegradc set_lt_config [ 1.607694] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1.607708] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1.631912] dp lt: CR not done [ 1.632358] dp lt: new config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 1.632360] dp lt: new config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 1.632362] dp lt: CR retry [ 1.632364] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.632368] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.632369] Michael tegradc set_lt_config [ 1.636219] dp lt: config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 1.636234] dp lt: config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 1.643924] hid-generic 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-70090000.xusb-3/input1 [ 1.659914] dp lt: CR done [ 1.659917] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1.659921] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.683911] tegradc tegradc.0: dp: aux read defer (0x10020000) -- 6 [ 1.685797] dp lt: CE done [ 1.685800] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1.685940] tegradc tegradc.0: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.685943] tegradc tegradc.0: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.685946] tegradc tegradc.0: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.685948] tegradc tegradc.0: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.685950] tegradc tegradc.0: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.685952] tegradc tegradc.0: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.685954] tegradc tegradc.0: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.685955] tegradc tegradc.0: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.685957] tegradc tegradc.0: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.685960] tegradc tegradc.0: Michael tegradc tegra_fb_blank :4 [ 1.685962] tegradc tegradc.0: blank - powerdown [ 1.686776] tegradc tegradc.0: nominal-pclk:274420000 parent:274416796 div:1.0 pclk:274416796 271675800~299117800 [ 1.723891] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 1.723893] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 1.723895] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.723896] dp lt: link training force disable [ 1.723897] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 1.827893] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.241570] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.243635] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.251875] tegradc tegradc.0: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 2.251944] tegradc tegradc.0: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 2.277579] tegradc tegradc.0: Michael tegradc tegra_fb_blank :0 [ 2.277581] tegradc tegradc.0: unblank [ 2.277583] tegradc tegradc.0: Michael tegradc _tegra_dc_enable [ 2.277586] tegradc tegradc.0: Michael tegradc dc->out->type : 3 1 [ 2.277589] tegradc tegradc.0: Michael is not tegradc tegra_dc_is_nvdisplay [ 2.277591] tegradc tegradc.0: Michael tegradc _tegra_dc_controller_enable [ 2.592232] tegradc tegradc.0: Michael tegradc tegra_dc_init [ 2.596462] tegradc tegradc.0: Michael tegradc dc->mode.pclk != 0 [ 2.596552] tegradc tegradc.0: nominal-pclk:274420000 parent:274416796 div:1.0 pclk:274416796 271675800~299117800 [ 2.596582] tegradc tegradc.0: Michael tegradc tegra_dc_dp_enable [ 2.600742] Michael tegradc For eDP, driver gets to decide the best mode [ 2.600744] Michael tegradc tegra_dp_hpd_op_edid_ready [ 2.603199] Micahel tegradc tegra_dp_read_sink_cap [ 2.603199] tegradc tegradc.0: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 2.611341] tegradc tegradc.0: Michael tegradc prepare enter tegra_sor_config_dp_clk_t21x [ 2.611365] Michael tegradc For DP on sor0, set pll_dp as parent of sor clock [ 2.611365] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 2.611367] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 2.611369] dp lt: state 0 (Reset), pending_lt_evt 0 [ 2.612899] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 2.612901] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 2.613343] Michael tegradc set_lt_config [ 2.613343] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 2.613353] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 2.613363] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 2.613373] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 2.636132] dp lt: CR not done [ 2.636800] dp lt: new config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 2.636801] dp lt: new config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 2.636802] dp lt: new config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 2.636803] dp lt: new config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 2.636804] dp lt: CR retry [ 2.636806] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 2.636809] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 2.636820] Michael tegradc set_lt_config [ 2.636821] dp lt: config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 2.636830] dp lt: config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 2.636840] dp lt: config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 2.636850] dp lt: config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 2.652368] tegra-pcie 1003000.pcie: link 1 down, retrying [ 2.660080] dp lt: CR done [ 2.660082] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 2.660084] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 2.683857] tegradc tegradc.0: dp: aux read defer (0x10020000) -- 6 [ 2.685547] dp lt: CE not done [ 2.686214] dp lt: new config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 2.686215] dp lt: new config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 2.686216] dp lt: new config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 2.686218] dp lt: new config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 2.686228] Michael tegradc set_lt_config [ 2.686229] dp lt: config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 2.686238] dp lt: config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 2.686248] dp lt: config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 2.686258] dp lt: config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 2.687155] dp lt: CE retry [ 2.687156] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 2.687159] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 2.707857] tegradc tegradc.0: dp: aux read defer (0x10020000) -- 6 [ 2.709547] dp lt: CE not done [ 2.710214] dp lt: new config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 2.710216] dp lt: new config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 2.710217] dp lt: new config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 2.710218] dp lt: new config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 2.710229] Michael tegradc set_lt_config [ 2.710229] dp lt: config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 2.710238] dp lt: config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 2.710248] dp lt: config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 2.710258] dp lt: config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 2.711155] dp lt: CE retry [ 2.711156] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 2.711159] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 2.731902] tegradc tegradc.0: dp: aux read defer (0x10020000) -- 6 [ 2.733593] dp lt: CE not done [ 2.734260] dp lt: new config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 2.734261] dp lt: new config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 2.734263] dp lt: new config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 2.734264] dp lt: new config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 2.734275] Michael tegradc set_lt_config [ 2.734276] dp lt: config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 2.734285] dp lt: config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 2.734295] dp lt: config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 2.734305] dp lt: config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 2.735203] dp lt: CE retry [ 2.735204] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 2.735207] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 2.755907] tegradc tegradc.0: dp: aux read defer (0x10020000) -- 6 [ 2.757598] dp lt: CE not done [ 2.758264] dp lt: new config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 2.758266] dp lt: new config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 2.758267] dp lt: new config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 2.758268] dp lt: new config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 2.758279] Michael tegradc set_lt_config [ 2.758280] dp lt: config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 2.758290] dp lt: config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 2.758299] dp lt: config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 2.758309] dp lt: config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 2.759207] dp lt: CE retry [ 2.759209] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 2.759212] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 2.779853] tegradc tegradc.0: dp: aux read defer (0x10020000) -- 6 [ 2.781543] dp lt: CE not done [ 2.782210] dp lt: new config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 2.782211] dp lt: new config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 2.782213] dp lt: new config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 2.782214] dp lt: new config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 2.782225] Michael tegradc set_lt_config [ 2.782225] dp lt: config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 2.782235] dp lt: config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 2.782245] dp lt: config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 2.782254] dp lt: config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 2.783151] dp lt: CE retry [ 2.783154] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 2.783156] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 2.803906] tegradc tegradc.0: dp: aux read defer (0x10020000) -- 6 [ 2.805599] dp lt: CE not done [ 2.806266] dp lt: new config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 2.806267] dp lt: new config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 2.806269] dp lt: new config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 2.806270] dp lt: new config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 2.806281] Michael tegradc set_lt_config [ 2.806281] dp lt: config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 2.806291] dp lt: config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 2.806300] dp lt: config: lane 2: vs level: 3, pe level: 0, pc2 level: 0 [ 2.806310] dp lt: config: lane 3: vs level: 3, pe level: 0, pc2 level: 0 [ 2.807208] dp lt: CE retry [ 2.807210] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 2.807213] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 2.827907] tegradc tegradc.0: dp: aux read defer (0x10020000) -- 6 [ 2.829598] dp lt: CE not done [ 2.829599] dp lt: CE retry limit 5 reached [ 2.829601] dp lt: switching from state 3 (channel equalization) to state 7 (reduce lane count) [ 2.829604] dp lt: state 7 (reduce lane count), pending_lt_evt 0 [ 2.831240] dp lt: retry CR, lanes: 2, link rate: 0x14 [ 2.831242] dp lt: switching from state 7 (reduce lane count) to state 2 (clock recovery) [ 2.831244] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 2.831687] Michael tegradc set_lt_config [ 2.831687] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 2.831698] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 2.855859] dp lt: CR not done [ 2.856304] dp lt: new config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 2.856306] dp lt: new config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 2.856306] dp lt: CR retry [ 2.856308] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 2.856310] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 2.856322] Michael tegradc set_lt_config [ 2.856322] dp lt: config: lane 0: vs level: 3, pe level: 0, pc2 level: 0 [ 2.856332] dp lt: config: lane 1: vs level: 3, pe level: 0, pc2 level: 0 [ 2.879907] dp lt: CR done [ 2.879909] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 2.879912] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 2.903905] tegradc tegradc.0: dp: aux read defer (0x10020000) -- 6 [ 2.905787] dp lt: CE done [ 2.905789] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 2.906074] tegradc tegradc.0: sync windows ret = 250 [ 3.017016] tegradc tegradc.1: Michael tegradc of_dc_parse_platform_data [ 3.023778] tegradc tegradc.1: disp1 connected to head1->/host1x/sor1 [ 3.023816] tegradc tegradc.1: No lt-data, using default setting [ 3.023823] Michael tegradc parse_disp_default_out [ 3.028465] tegradc tegradc.1: No hpd-gpio in DT [ 3.028487] tegradc tegradc.1: DT parsed successfully [ 3.028505] tegradc tegradc.1: Display dc.ffffff800d4c0000 registered with id=1 [ 3.029464] tegradc tegradc.1: Michael tegradc : tegra_dc_dp_init [ 3.035736] tegradc tegradc.1: Michael tegradc dp->early_enable = true [ 3.042397] tegradc tegradc.1: Michael tegradc !dp->dpaux [ 3.048203] tegradc tegradc.1: Michael tegradc dc->out->type != TEGRA_DC_OUT_FAKE_DP [ 3.056086] tegradc tegradc.1: Michael tegradc hpd_switch_name1 : dp1 [ 3.062557] tegradc tegradc.1: Michael tegradc tegra_dc_sor_init [ 3.065741] tegra-pcie 1003000.pcie: link 1 down, retrying [ 3.068598] tegradc tegradc.1: Michael tegradc tegra_dc_sor_init sor->ctrl_num : 1 [ 3.076273] tegradc tegradc.1: Michael tegradc sor1 [ 3.081205] tegradc tegradc.1: Michael tegradc !(tegra_dc_is_t21x() && sor->ctrl_num == 0) [ 3.089525] Test Michael tegradc : 1 [ 3.092942] Michael tegradc : 1 [ 3.096301] tegradc tegradc.1: Michael tegradc enter sor->pinctrl_sor [ 3.102823] tegradc tegradc.1: Michael tegradc portnum : 0, powergate_id : 17 [ 3.110065] Michael tegradc tegra_hpd_init [ 3.114009] tegradc tegradc.1: Michael tegradc tegra_dc_dp_hpd_state sor_num : 1 , powergate id:17 [ 3.126029] tegradc tegradc.1: Michael test tegradc tegra_dc_dp_hpd_state : 0 .val : 0 [ 3.135008] tegradc tegradc.1: probed [ 3.141786] tegradc tegradc.1: fb registered [ 3.144881] Michael tegradc tegra_dpaux_config_pad_mode : 0 [ 3.150323] tegradc tegradc.1: Michael tegradc tegra_dc_dp_hpd_state sor_num : 1 , powergate id:17 [ 3.159328] tegradc tegradc.1: Michael test tegradc tegra_dc_dp_hpd_state : 0 .val : 0 [ 3.167278] tegradc tegradc.1: Michael tegradc _tegra_dc_enable [ 3.173225] tegradc tegradc.1: Michael tegradc tegra_dc_dp_hpd_state sor_num : 1 , powergate id:17 [ 3.182218] tegradc tegradc.1: Michael test tegradc tegra_dc_dp_hpd_state : 0 .val : 0 [ 3.190168] tegradc tegradc.1: Michael tegradc dc->out->type : 3 0 [ 3.196373] tegradc tegradc.1: Michael tegradc tegra_dc_dp_hpd_state sor_num : 1 , powergate id:17 [ 3.205370] tegradc tegradc.1: Michael test tegradc tegra_dc_dp_hpd_state : 0 .val : 0 [ 3.215350] tegradc tegradc.1: Michael tegradc dc->out->type == TEGRA_DC_OUT_DP [ 3.224733] tegradc tegradc.1: Michael tegradc tegra_dc_dp_hpd_state sor_num : 1 , powergate id:17 [ 3.224740] tegradc tegradc.1: Michael tegradc tegra_dc_dp_hpd_state sor_num : 1 , powergate id:17 [ 3.224744] tegradc tegradc.1: Michael test tegradc tegra_dc_dp_hpd_state : 0 .val : 0 [ 3.224747] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 3.224749] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 3.224752] tegradc tegradc.1: Michael tegradc tegra_dc_dp_hpd_state sor_num : 1 , powergate id:17 [ 3.224756] tegradc tegradc.1: Michael test tegradc tegra_dc_dp_hpd_state : 0 .val : 0 [ 3.224757] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 3.278057] tegradc tegradc.1: Michael tegradc tegra_fb_blank :4 [ 3.278059] tegradc tegradc.1: blank - powerdown [ 3.278064] hpd: hpd_switch 0 [ 3.278067] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 3.278071] tegradc tegradc.1: Michael tegradc tegra_dc_dp_hpd_state sor_num : 1 , powergate id:17 [ 3.289138] tegradc tegradc.1: Michael test tegradc tegra_dc_dp_hpd_state : 0 .val : 0 [ 3.290392] isp 54600000.isp: initialized [ 3.291181] isp 54680000.isp: initialized [ 3.299529] tegradc tegradc.1: Michael test tegradc tegra_dc_dp_hpd_state : 0 .val : 0 [ 3.301018] last reset is due to software reset [ 3.301020] KERNEL: PMC reset status reg: 0x3 [ 3.301102] BL: PMC reset status reg: 0x3 [ 3.301103] BL: PMIC poweroff Event Recorder: 0x0 [ 3.302779] clk_cbus_recalc_rate: no gbus parent [ 3.302783] clk_cbus_round_rate: no gbus parent [ 3.302784] clk_cbus_round_rate: no gbus parent [ 3.302791] clk_cbus_recalc_rate: no gbus parent [ 3.303168] clk_cbus_recalc_rate: no gbus parent [ 3.303171] clk_cbus_round_rate: no gbus parent [ 3.303172] clk_cbus_round_rate: no gbus parent [ 3.303174] clk_cbus_recalc_rate: no gbus parent [ 3.303188] tegra_dvfs: GPU-cap: registered [ 3.303243] tegra dvfs: vdd-cpu: nominal 1226mV, offset 708000uV, step 19200uV, scaling enabled [ 3.303245] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled [ 3.303247] tegra dvfs: vdd-gpu: nominal 1120mV, offset 710000uV, step 10000uV, scaling enabled [ 3.304954] tegra_dvfs: vdd-gpu-vts: registered [ 3.305962] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 3.306834] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 3.307361] input: gpio-keys as /devices/gpio-keys/input/input3 [ 3.309581] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 3.309587] tegradc tegradc.1: Michael tegradc tegra_dc_dp_hpd_state sor_num : 1 , powergate id:17 [ 3.320675] tegradc tegradc.1: Michael test tegradc tegra_dc_dp_hpd_state : 0 .val : 0 [ 3.330699] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 3.340540] tegra_rtc 7000e000.rtc: setting system clock to 2019-08-30 02:02:36 UTC (1567130556) [ 3.341784] vi 54080000.vi: vi_probe: ++ [ 3.344942] vi 54080000.vi: initialized [ 3.346866] vi 54080000.vi: ep of_device is not enabled /host1x/vi/ports/port@0/endpoint. [ 3.346870] vi 54080000.vi: ep of_device is not enabled /host1x/vi/ports/port@1/endpoint. [ 3.346874] vi 54080000.vi: ep of_device is not enabled /host1x/vi/ports/port@2/endpoint. [ 3.346877] vi 54080000.vi: ep of_device is not enabled /host1x/vi/ports/port@3/endpoint. [ 3.347096] mmcblk mmc0:0001: Card claimed for testing. [ 3.348948] Disable partitions left on by BL [ 3.348952] disb [ 3.349037] bwmgr: missing cdev-type property [ 3.349315] DRAM derating cdev registered. [ 3.350702] vdd-cpu-fixed: disabling [ 3.350712] vdd-cam-hv: disabling [ 3.350834] avdd-ts-hv: disabling [ 3.350894] vdd-ts: disabling [ 3.350955] en-vdd-sd: disabling [ 3.350957] en-vdd-cam: disabling [ 3.350960] aux-3v3: disabling [ 3.350963] snsr_pm: disabling [ 3.350965] vdd-disp-3v0: disabling [ 3.350968] vdd-fan: disabling [ 3.350971] usb-vbus1: disabling [ 3.350973] en-vdd-ts-1v8: disabling [ 3.350975] en-vdd-ts-hv-3v3: disabling [ 3.350978] en-mdm-pwr-3v7: disabling [ 3.350981] en-vdd-cam-hv-2v8: disabling [ 3.350984] en-vdd-cam-1v2: disabling [ 3.350987] en-vdd-vcm-2v8: disabling [ 3.350989] en-vdd-cam-1v2-alt: disabling [ 3.351064] ALSA device list: [ 3.351067] #0: tegra-hda at 0x70038000 irq 83 [ 3.351069] #1: tegra-snd-t210ref-mobile-rt565x [ 3.353819] Freeing unused kernel memory: 8576K [ 3.369691] L4T-INITRD Build DATE: Fri Aug 30 02:02:36 UTC 2019 [ 3.373475] Root device found: mmcblk0p1 [ 3.374353] Found dev node: /dev/mmcblk0p1 [ 3.478301] tegra-pcie 1003000.pcie: link 1 down, retrying [ 3.480378] tegra-pcie 1003000.pcie: link 1 down, ignoring [ 3.514817] EXT4-fs (mmcblk0p1): 52 orphan inodes deleted [ 3.514820] EXT4-fs (mmcblk0p1): recovery complete [ 3.531885] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.532576] Rootfs mounted over mmcblk0p1 [ 3.548545] Switching from initrd to actual rootfs [ 3.635323] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.644830] cgroup: cgroup2: unknown option "nsdelegate" [ 3.661575] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.662225] systemd[1]: Detected architecture arm64. [ 3.682570] systemd[1]: Set hostname to . [ 3.684993] tegra-pcie 1003000.pcie: PCIE: no end points detected [ 3.685112] tegra-pcie 1003000.pcie: PCIE: Disable power rails [ 3.737705] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.737712] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.821790] random: systemd: uninitialized urandom read (16 bytes read) [ 3.823087] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.823188] random: systemd: uninitialized urandom read (16 bytes read) [ 3.823206] systemd[1]: Reached target User and Group Name Lookups. [ 3.823253] random: systemd: uninitialized urandom read (16 bytes read) [ 3.823355] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.824760] systemd[1]: Created slice User and Session Slice. [ 3.825481] systemd[1]: Created slice System Slice. [ 3.846753] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.960103] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 4.105072] systemd-journald[2060]: Received request to flush runtime journal from PID 1 [ 4.779739] using random self ethernet address [ 4.792073] using random host ethernet address [ 4.844127] Mass Storage Function, version: 2009/09/11 [ 4.844133] LUN: removable file: (no medium) [ 4.849950] using random self ethernet address [ 4.867466] using random host ethernet address [ 4.906074] rndis0: HOST MAC 22:85:c5:97:79:d4 [ 4.906231] rndis0: MAC 22:85:c5:97:79:d5 [ 4.909936] usb0: HOST MAC 22:85:c5:97:79:d6 [ 4.909966] usb0: MAC 22:85:c5:97:79:d7 [ 4.909984] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 4.910666] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 4.910681] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 4.910751] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.911021] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.911033] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 4.912029] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 4.912048] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.912333] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.916608] l4tbr0: port 1(rndis0) entered blocking state [ 4.916613] l4tbr0: port 1(rndis0) entered disabled state [ 4.917511] device rndis0 entered promiscuous mode [ 4.927386] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 4.944813] l4tbr0: port 2(usb0) entered blocking state [ 4.944818] l4tbr0: port 2(usb0) entered disabled state [ 4.949154] device usb0 entered promiscuous mode [ 4.963610] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 5.150736] random: crng init done [ 5.156207] random: 7 urandom warning(s) missed due to ratelimiting [ 5.289015] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 5.289022] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 5.616199] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 5.616717] zram: Added device: zram0 [ 5.620334] zram: Added device: zram1 [ 5.622483] zram: Added device: zram2 [ 5.624139] zram: Added device: zram3 [ 5.637025] usb 2-1: New USB device found, idVendor=0955, idProduct=09ff [ 5.637031] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 5.637034] usb 2-1: Product: USB 10/100/1000 LAN [ 5.637037] usb 2-1: Manufacturer: Nvidia [ 5.637040] usb 2-1: SerialNumber: 000001000000 [ 5.687063] zram0: detected capacity change from 0 to 519606272 [ 5.772549] usb 2-1: reset SuperSpeed USB device number 2 using tegra-xusb [ 5.791385] Adding 507424k swap on /dev/zram0. Priority:5 extents:1 across:507424k SS [ 5.798938] r8152 2-1:1.0 eth0: v2.09.00 (2017/08/21) [ 5.798944] r8152 2-1:1.0 eth0: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 5.808047] zram1: detected capacity change from 0 to 519606272 [ 5.824440] Adding 507424k swap on /dev/zram1. Priority:5 extents:1 across:507424k SS [ 5.834997] zram2: detected capacity change from 0 to 519606272 [ 5.858458] Adding 507424k swap on /dev/zram2. Priority:5 extents:1 across:507424k SS [ 5.872836] zram3: detected capacity change from 0 to 519606272 [ 5.894728] Adding 507424k swap on /dev/zram3. Priority:5 extents:1 across:507424k SS [ 5.996214] dhd_module_init in [ 5.996288] found wifi platform device bcmdhd_wlan [ 5.997401] Power-up adapter 'DHD generic adapter' [ 5.997426] wifi_platform_set_power = 1 [ 6.203876] wifi_platform_bus_enumerate device present 1 [ 6.228011] wifi_platform_bus_enumerate device present 0 [ 6.230401] F1 signature read @0x18000000=0x17214354 [ 6.238630] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 6.239503] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 6.239601] wifi_platform_get_mac_addr [ 6.243362] ids dhd_log_netlink_init [ 6.246469] wl_create_event_handler(): thread:wl_event_handler:147c started [ 6.246513] wl_event_handler : [ 6.246517] tsk Enter, tsk = 0xffffffc0d8b01a90 [ 6.248222] dhd_attach(): thread:dhd_watchdog_thread:147e started [ 6.249555] dhd_attach(): thread:dhd_dpc:147f started [ 6.249941] dhd_attach(): thread:dhd_rxf:1483 started [ 6.249963] dhd_deferred_work_init: work queue initialized [ 6.250161] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 6.254027] Register interface [wlan0] MAC: 00:04:4b:bf:91:e1 [ 6.254034] dhd_prot_ioctl : bus is down. we have nothing to do [ 6.254171] sdhci-tegra sdhci-tegra.1: Tuning done, restoring the best tap value : 43 [ 6.255229] wifi_platform_set_power = 0 [ 6.679707] tegradc tegradc.0: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 6.679728] tegradc tegradc.0: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 6.765261] tegradc tegradc.0: Michael tegradc tegra_fb_blank :0 [ 6.765263] tegradc tegradc.0: unblank [ 6.765482] tegradc tegradc.1: Michael tegradc tegra_fb_blank :4 [ 6.765485] tegradc tegradc.1: blank - powerdown [ 7.227972] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.228101] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 7.228110] wl_android_wifi_on in [ 7.228116] wifi_platform_set_power = 1 [ 7.591984] sdhci-tegra sdhci-tegra.1: Tuning done, restoring the best tap value : 43 [ 7.592519] F1 signature read @0x18000000=0x17214354 [ 7.598173] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 7.598996] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 7.663877] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 7.725447] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 7.726937] wifi_platform_get_mac_addr [ 7.728542] Firmware up: op_mode=0x0005, MAC=00:04:4b:bf:91:e1 [ 7.732331] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ 7.732370] Skipping the clm download. len:0 memblk: (null) [ 7.734369] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 7.738802] Firmware version = wl0: May 17 2019 16:59:40 version 7.35.349.79 (r714996 CY) FWID 01-8499e313 [ 7.740965] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 7.772716] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.780073] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.852096] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : [ 7.852099] P2P interface registered [ 7.861555] WLC_E_IF: NO_IF set, event Ignored [ 7.871809] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.677482] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.677493] Bluetooth: BNEP socket layer initialized [ 10.003122] fuse init (API version 7.26) [ 10.390051] tegradc tegradc.0: Michael tegradc tegra_fb_blank :0 [ 10.390054] tegradc tegradc.0: unblank [ 10.390185] tegradc tegradc.1: Michael tegradc tegra_fb_blank :4 [ 10.390187] tegradc tegradc.1: blank - powerdown [ 20.899468] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.902660] r8152 2-1:1.0 eth0: carrier on