[0028.288] I> MB1 (version: 0.28.0.0-t234-54845784-ec016368) [0028.293] I> t234-A01-0-Silicon (0x12347) Prod [0028.298] I> Boot-mode : Coldboot [0028.301] I> Emulation: [0028.303] I> Entry timestamp: 0x00000000 [0028.307] I> last_boot_error: 0x0 [0028.310] I> BR-BCT: preprod_dev_sign: 0 [0028.314] I> rst_source: 0x0, rst_level: 0x0 [0028.318] I> Task: Bootchain select WAR set (0x5000c741) [0028.323] I> Active chain: 0 [0028.326] I> Task: CRC check (0x5001dab5) [0028.330] I> Task: Initialize MB2 params (0x5000d78d) [0028.335] I> MB2-params @ 0x40060000 [0028.339] I> Task: Crypto init (0x5001cb8d) [0028.343] I> Task: Secure debug controls (0x5000cd21) [0028.348] I> Task: strap war set (0x5000c70d) [0028.352] I> strap value(0x4000001) set to 0x4000001 [0028.357] I> Task: Initialize SOC Therm (0x5001af85) [0028.362] I> Task: Program NV master stream id (0x5000ccd5) [0028.367] I> Task: Verify boot mode (0xd482021) [0028.373] I> Task: Alias fuses (0x500109cd) [0028.377] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0028.385] I> Task: Print SKU type (0x5000fee1) [0028.389] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000038 [0028.394] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0028.398] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0028.403] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0028.407] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0028.411] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0028.415] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0028.419] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0028.423] I> FUSE_SKU_INFO_0 = 0xd3 [0028.427] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0028.431] I> FUSE_PACKAGE_INFO_0 = 0x2 [0028.435] I> SKU: Prod [0028.437] I> Task: Boost clocks (0x5001462d) [0028.441] I> Initializing PLLC2 for AXI_CBB. [0028.445] I> AXI_CBB : src = 35, divisor = 0 [0028.449] I> Task: Voltage monitor (0x50014639) [0028.454] I> VMON: Vmon re-calibration and fine tuning done [0028.459] I> Task: UPHY init (0x5000dced) [0028.463] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0028.469] I> Task: Boot device init (0x50000b39) [0028.473] I> Boot_device: RCM [0028.476] I> USB configuration success [0028.480] I> Task: TSC init (0x5001fa6d) [0028.484] I> Task: Load membct (0x50011fb9) [0028.488] I> RAM_CODE 0x4000001 [0028.491] I> Loading MEMBCT [0028.494] I> Active chain: 0 [0028.496] I> Slot: 0 [0028.498] I> Binary[0] block-0 (partition size: 0x40000) [0028.504] I> get_binary_info: Binary name: MEM-BCT-0 [0028.509] I> Size of crypto header is 8192 [0028.512] I> BCH load address is : 0x40050000 [0028.517] I> Size of crypto header is 8192 [0028.521] I> BCH of MEM-BCT-0 read from storage [0028.525] I> BCH address is : 0x40050000 [0028.529] I> MEM-BCT-0 header integrity check is success [0028.534] I> Binary magic in BCH component 0 is MEM0 [0028.539] I> component binary type is 0 [0028.545] I> MEM-BCT-0 binary is read from storage [0028.550] I> MEM-BCT-0 binary integrity check is success [0028.555] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0028.561] I> RAM_CODE 0x4000001 [0028.567] I> RAM_CODE 0x4000001 [0028.570] I> Task: Load Page retirement list (0x50011601) [0028.576] I> Task: SDRAM params override (0x50011f95) [0028.581] I> Task: Save mem-bct info (0x500147fd) [0028.585] I> Task: Carveout allocate (0x50014861) [0028.590] I> ECC region[0]: Start:0x0, End:0x0 [0028.594] I> ECC region[1]: Start:0x0, End:0x0 [0028.598] I> ECC region[2]: Start:0x0, End:0x0 [0028.603] I> ECC region[3]: Start:0x0, End:0x0 [0028.607] I> ECC region[4]: Start:0x0, End:0x0 [0028.611] I> Non-ECC region[0]: Start:0x80000000, End:0x480000000 [0028.617] I> Non-ECC region[1]: Start:0x0, End:0x0 [0028.622] I> Non-ECC region[2]: Start:0x0, End:0x0 [0028.626] I> Non-ECC region[3]: Start:0x0, End:0x0 [0028.631] I> Non-ECC region[4]: Start:0x0, End:0x0 [0028.641] I> allocated(CO:44) base:0x449800000 size:0x36800000 align: 0x100000 [0028.648] I> allocated(CO:31) base:0x440000000 size:0x8000000 align: 0x8000000 [0028.655] I> allocated(CO:43) base:0x43c000000 size:0x4000000 align: 0x200000 [0028.662] I> allocated(CO:20) base:0x43a000000 size:0x2000000 align: 0x2000000 [0028.669] I> allocated(CO:24) base:0x438000000 size:0x2000000 align: 0x2000000 [0028.676] I> allocated(CO:28) base:0x436000000 size:0x2000000 align: 0x2000000 [0028.683] I> allocated(CO:29) base:0x434000000 size:0x2000000 align: 0x2000000 [0028.690] I> allocated(CO:22) base:0x448000000 size:0x1000000 align: 0x1000000 [0028.697] I> allocated(CO:41) base:0x433000000 size:0x1000000 align: 0x100000 [0028.704] I> allocated(CO:35) base:0x432200000 size:0xe00000 align: 0x10000 [0028.711] I> allocated(CO:02) base:0x449000000 size:0x800000 align: 0x800000 [0028.718] I> allocated(CO:03) base:0x431800000 size:0x800000 align: 0x800000 [0028.725] I> allocated(CO:06) base:0x431000000 size:0x800000 align: 0x800000 [0028.732] I> allocated(CO:10) base:0x430800000 size:0x800000 align: 0x800000 [0028.739] I> allocated(CO:56) base:0x430000000 size:0x800000 align: 0x200000 [0028.746] I> allocated(CO:07) base:0x42fc00000 size:0x400000 align: 0x400000 [0028.753] I> allocated(CO:33) base:0x42f800000 size:0x400000 align: 0x200000 [0028.760] I> allocated(CO:01) base:0x432100000 size:0x100000 align: 0x100000 [0028.767] I> allocated(CO:04) base:0x432000000 size:0x100000 align: 0x100000 [0028.774] I> allocated(CO:05) base:0x42f700000 size:0x100000 align: 0x100000 [0028.781] I> allocated(CO:08) base:0x42f600000 size:0x100000 align: 0x100000 [0028.787] I> allocated(CO:09) base:0x42f500000 size:0x100000 align: 0x100000 [0028.794] I> allocated(CO:15) base:0x42f400000 size:0x100000 align: 0x100000 [0028.801] I> allocated(CO:17) base:0x42f300000 size:0x100000 align: 0x100000 [0028.808] I> allocated(CO:23) base:0x42f200000 size:0x100000 align: 0x100000 [0028.815] I> allocated(CO:27) base:0x42f100000 size:0x100000 align: 0x100000 [0028.822] I> allocated(CO:42) base:0x42f000000 size:0x100000 align: 0x100000 [0028.829] I> allocated(CO:54) base:0x42ef80000 size:0x80000 align: 0x80000 [0028.836] I> allocated(CO:34) base:0x42ef70000 size:0x10000 align: 0x10000 [0028.842] I> allocated(CO:46) base:0x400000000 size:0x20000000 align: 0x20000000 [0028.850] I> allocated(CO:47) base:0x42ea00000 size:0x400000 align: 0x200000 [0028.857] I> allocated(CO:72) base:0x42e800000 size:0x200000 align: 0x10000 [0028.864] I> allocated(CO:48) base:0x42ef50000 size:0x20000 align: 0x10000 [0028.870] I> allocated(CO:69) base:0x42ef30000 size:0x20000 align: 0x10000 [0028.877] I> allocated(CO:49) base:0x42ef20000 size:0x10000 align: 0x10000 [0028.884] I> allocated(CO:50) base:0x42ef10000 size:0x10000 align: 0x10000 [0028.891] I> allocated(CO:52) base:0x42ef00000 size:0x10000 align: 0x10000 [0028.897] I> NSDRAM base: 0x80000000, end: 0x42ef70000 [0028.902] I> Task: Thermal check (0x500208f9) [0028.906] I> max_chip_limit = 105 [0028.910] I> min_chip_limit = -28 [0028.913] I> max temp read = 48 [0028.916] I> min temp read = 47 [0028.919] I> Task: Update FSI SCR with thermal fuse data (0x50020a05) [0028.925] I> Task: Enable WDT 5th expiry (0x50020699) [0028.930] I> Task: I2C register (0x50000ad9) [0028.934] I> Task: Reset FSI (0x50014635) [0028.938] I> Task: Pinmux init (0x500137bd) [0028.942] I> Task: Prod config init (0x50013c09) [0028.947] I> Task: Pad voltage init (0x50013859) [0028.951] I> Task: Prod init (0x50013c4d) [0028.955] I> Task: Common rail init (0x50014305) [0028.960] I> DONE: Thermal config [0028.964] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0028.971] I> DONE: SOC rail config [0028.975] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0028.981] I> DONE: MEMIO rail config [0028.985] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT. [0028.991] I> DONE: GPU rail info [0028.995] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT. [0029.001] I> DONE: CV rail info [0029.004] I> Task: Mem clock src (0x50011de5) [0029.008] I> Task: Misc. board config (0x500143ad) [0029.014] W> PMIC_CONFIG: Platform config not found in MB1 BCT. [0029.019] I> Task: SDRAM init (0x50011de9) [0029.026] I> SDRAM-params @ 0xd485000 [0029.029] I> MSS code-drop: NvBootSdramInit [0029.033] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0029.041] I> MSS CAR: Init PLLM [0029.044] I> MSS CAR: Init PLLHUB [0029.048] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0029.060] I> mb1_sdram_init Done ! [0029.063] I> SDRAM Size in Total 0x400000000 [0029.067] I> Task: Dram Ecc scrub (0x50011729) [0029.072] I> Task: DRAM alias check (0x50011f8d) [0029.090] I> Task: Program NSDRAM carveout (0x50015171) [0029.096] I> NSDRAM carveout encryption is enabled [0029.101] I> Program NSDRAM carveout [0029.106] I> Task: Register checker (0x50011f91) [0029.113] I> Task: Enable clock-mon (0x5001fa5d) [0029.120] I> FMON: Fmon re-programming done [0029.124] I> Task: Mapper init (0x5001dfed) [0029.130] I> Task: SC7 Context Init (0x5001fd5d) [0029.135] I> Task: CCPLEX IST init (0x5000d561) [0029.142] I> Task: CPU WP0 (0x5000c7a9) [0029.147] I> Loading MCE [0029.150] I> Active chain: 0 [0029.153] I> Slot: 0 [0029.156] I> Binary[8] block-0 (partition size: 0x80000) [0029.162] I> get_binary_info: Binary name: MCE [0029.167] I> Size of crypto header is 8192 [0029.171] I> BCH load address is : 0x4003e000 [0029.177] I> Size of crypto header is 8192 [0031.306] I> BCH of MCE read from storage [0031.310] I> BCH address is : 0x4003e000 [0031.316] I> MCE header integrity check is success [0031.321] I> Binary magic in BCH component 0 is MTSM [0031.327] I> component binary type is 8 [0031.331] I> Size of crypto header is 8192 [0031.344] I> MCE binary is read from storage [0031.350] I> MCE binary integrity check is success [0031.355] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0031.363] I> Size of crypto header is 8192 [0031.368] I> Sending WP0 mailbox command to PSC [0031.380] I> Task: XUSB Powergate (0x50000ae5) [0031.385] I> Skipping powergate XUSB. [0031.389] I> Task: MB1 fixed firewalls (0x5001f0d9) [0031.410] I> Task: Load bpmp-fw (0x5001f41d) [0031.416] I> Active chain: 0 [0031.419] I> Slot: 0 [0031.422] I> Binary[15] block-0 (partition size: 0x180000) [0031.428] I> get_binary_info: Binary name: BPMP_FW [0031.434] I> Size of crypto header is 8192 [0031.438] I> BCH load address is : 0x807fe000 [0031.444] I> Size of crypto header is 8192 [0031.449] I> BCH of BPMP_FW read from storage [0031.454] I> BCH address is : 0x807fe000 [0031.459] I> BPMP_FW header integrity check is success [0031.465] I> Binary magic in BCH component 0 is BPMF [0031.470] I> component binary type is 15 [0031.475] I> Size of crypto header is 8192 [0031.527] I> BPMP_FW binary is read from storage [0031.535] I> BPMP_FW binary integrity check is success [0031.540] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfdc40) [0031.549] I> Active chain: 0 [0031.552] I> Slot: 0 [0031.554] I> Binary[16] block-251658752 (partition size: 0x400000) [0031.562] I> get_binary_info: Binary name: BPMP_FW_DTB [0031.568] I> Size of crypto header is 8192 [0031.573] I> BCH load address is : 0x807fc000 [0031.578] I> Size of crypto header is 8192 [0031.583] I> BCH of BPMP_FW_DTB read from storage [0031.589] I> BCH address is : 0x807fc000 [0031.594] I> BPMP_FW_DTB header integrity check is success [0031.600] I> Binary magic in BCH component 0 is BPMD [0031.606] I> component binary type is 16 [0031.610] I> Size of crypto header is 8192 [0031.621] I> BPMP_FW_DTB binary is read from storage [0031.627] I> BPMP_FW_DTB binary integrity check is success [0031.633] I> Binary BPMP_FW_DTB loaded successfully at 0x807dc170 (0x1fe80) [0031.642] I> Task: Load psc-fw (0x5001f5a5) [0031.648] I> Active chain: 0 [0031.651] I> Slot: 0 [0031.653] I> Binary[17] block-0 (partition size: 0xc0000) [0031.660] I> get_binary_info: Binary name: PSC_FW [0031.665] I> Size of crypto header is 8192 [0031.670] I> BCH load address is : 0x80ffe000 [0031.675] I> Size of crypto header is 8192 [0031.680] I> BCH of PSC_FW read from storage [0031.685] I> BCH address is : 0x80ffe000 [0031.691] I> PSC_FW header integrity check is success [0031.696] I> Binary magic in BCH component 0 is PFWP [0031.701] I> component binary type is 17 [0031.706] I> Size of crypto header is 8192 [0031.727] I> PSC_FW binary is read from storage [0031.733] I> PSC_FW binary integrity check is success [0031.739] I> Binary PSC_FW loaded successfully at 0x80000000 (0x59980) [0031.748] I> Task: Load nvdec-fw (0x5001f619) [0031.753] I> Active chain: 0 [0031.757] I> Slot: 0 [0031.759] I> Binary[7] block-0 (partition size: 0x100000) [0031.765] I> get_binary_info: Binary name: NVDEC [0031.770] I> Size of crypto header is 8192 [0031.775] I> BCH load address is : 0x800fe000 [0031.781] I> Size of crypto header is 8192 [0031.786] I> BCH of NVDEC read from storage [0031.790] I> BCH address is : 0x800fe000 [0031.796] I> NVDEC header integrity check is success [0031.802] I> Binary magic in BCH component 0 is NDEC [0031.807] I> component binary type is 7 [0031.811] I> Size of crypto header is 8192 [0031.829] I> NVDEC binary is read from storage [0031.835] I> NVDEC binary integrity check is success [0031.840] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0031.851] I> Task: Load tsec-fw (0x5001f9a5) [0031.857] I> TSEC-FW load support not enabled [0031.861] I> Task: GPIO interrupt map (0x50014541) [0031.868] I> Task: SC7 context save (0x5001fe9d) [0031.874] I> Task: Load MB2/Applet/FSKP (0x5000d691) [0031.880] I> Loading MB2 [0031.883] I> Active chain: 0 [0031.886] I> Slot: 0 [0031.889] I> Binary[6] block-0 (partition size: 0x80000) [0031.895] I> get_binary_info: Binary name: MB2 [0031.900] I> Size of crypto header is 8192 [0031.904] I> BCH load address is : 0x8007e000 [0031.910] I> Size of crypto header is 8192 [0031.915] I> BCH of MB2 read from storage [0031.920] I> BCH address is : 0x8007e000 [0031.925] I> MB2 header integrity check is success [0031.930] I> Binary magic in BCH component 0 is MB2B [0031.936] I> component binary type is 6 [0031.940] I> Size of crypto header is 8192 [0031.965] I> MB2 binary is read from storage [0031.970] I> MB2 binary integrity check is success [0031.976] I> Binary MB2 loaded successfully at 0x80000000 (0x68e00) [0031.984] I> Task: Map CCPLEX SHARED carveout (0x5000d835) [0031.991] I> Task: Prepare MB2 params (0x5000d8f1) [0031.999] I> BR-BCT Boot Chain Fields [0032.003] I> u32_non_gpio_select_boot_chain : 0 [0032.009] I> u32_num_boot_chains : 2 [0032.014] I> bf_bl_gpio_select_boot_chain_1b : 0 [0032.020] I> Task: Program misc carveouts (0x50014bcd) [0032.026] I> Program IPC carveouts [0032.034] I> Task: Dram ecc test (0x500117a5) [0032.039] I> Task: Misc NV security settings (0x5000d0f9) [0032.046] I> NVDEC sticky bits programming done [0032.051] I> Successfully powergated NVDEC [0032.056] I> Task: Disable/Reload WDT (0x500206e1) [0032.062] I> Programmed SLCG global override := 0x0 [0032.067] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-a9c0116a) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : RCM BOOT I> Emulation: I> Entry timestamp: 0x01e9e43f I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x430000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e80) I> Task: Enable hot-plug capability (0x50025b5c) I> Task: Set blob address (0x50001e58) I> Task: PSC mailbox init (0x50015c10) I> Task: Crypto init (0x5000573c) I> Task: Enable GP-SE clock (0x50001fe4) I> Task: DICE Identity init (0x50018fcc) I> DICE is not enabled. I> Task: I2C register (0x50001e44) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e2c) I> Task: Load and authenticate registered FWs (0x5001bfc0) I> Task: Load AUXP FWs (0x500256fc) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x42f600000 I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x42f300000 I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x43a000000 I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x42fc00000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x42f700000 I> Task: Carveout setup (0x5001e6a0) I> Program remaining OEM carveouts I> Task: Enable FSI VMON (0x5001566c) I> Task: Restore XUSB sec (0x50001d44) I> Task: Enable FSI SE clock (0x5001606c) I> Task: Initialize SBSA UART CAR (0x50001f48) I> Task: Initialize CPUBL Params (0x50016f88) I> CPUBL-params @ 0x436000000 I> Task: Prepare eeprom data (0x50016d54) I> Task: Unpowergate APE (0x500167cc) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: OEM firewalls (0x50022920) I> OEM firewalls configured I> Task: Powergate APE (0x50016940) I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings (0x50022ff0) I> Task: Unhalt AUXPs (0x50025964) I> Unhalting SPE.. I> Enabling combined UART \0ÿýÿàspe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 243b265b351d6bb9cc7b2e3acc5d90f8 spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler ÿá I> Task: Trigger mailbox for PSC-BL1 exit (0x50015c90) I> Sending opcode 0x4d420802 to psc ÿçINFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x448002000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: 8a33b23-73b589c-8a15f76-rel-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 ÿáI> Received ACK from psc I> Task: ÿçINFO: MONITOR: user task addr:0x448022000, blob offset:0x00020000 INFO: MONITOR: populated user images:13 INFO: mret to Supervisor! INFO: psc supervisor init. INFO: psc_irq_init... INFO: enter idle task. ÿâ bpmp: socket 0 bpmp: base binary md5 is ccd7dae126b648f6d4de17417b40e939 bpmp: combined binary md5 is 9a7bb16aee9be45a56e6b18b82f5e183 bpmp: firmware tag is 9a7bb16aee9be45a56e6-ccd7dae126b initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized tj_init initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ÿáStart secure NOR provision (0x50018af8) I> Task: ÿâinitialized avfs_clk_platform initialized powergate ÿáLoad FSI keyblob (0x5001ÿâinitialized dvs ÿá60bÿâinitialized clk_mach_config initialized pm initialized suspend initialized strap initialized mce_dbell ÿá4) I> Task: Unhalt AUXPs (0x5002596c) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalt successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x50017080) I> Task: Load TOS (0x50017784) I> Task: Load and authenticate registered FWs (0x5001bfc0) ÿå[ 4.091999] Camera-FW on t234-rce-safe started ÿáI> MB2-params @ 0x40060000 ÿåTCU early console enabled. ÿáI> cpubl: Authentication Finalize Done I> Binÿâinitialized emc initialized emc_mrq ÿè ÿáary cpubl loaded successfully at 0x42ea00000ÿâinitialized clk_cal initialized uphy_dt initialized uphy_mrq ÿá ÿâinitialized uphy ÿáI> tos: Authentication Finalize Done I> Binary tos lÿâinitialized pg_late initialized pg_mrq_init swdtimer_init: 0 reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ÿáoaded successfully at 0x43fdfe0d0 I> Relocating OP-TEE dtb from: 0x43feff840 to 0x42ef30000, sizeÿâinitialized clk_cal_late initialized noc_late initialized cvc ÿá: 0x1976 I> [0] START: 0x80000000ÿâinitialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable pwm3 enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable usb2_trk enable xusb_ss_dev enable xusb_fs_dev enable xusb_falcon enable dsi_lp enable xusb_core_mux enable xusb_core_dev initialized clk_mach_post initialized pg_post initialized regulator_post initialized proÿå[ 4.221654] Camera-FW on t234-rce-safe ready SHA1=10150ec0 (crt 21.751 ms,ÿâfile initialized fuse_late initialized mrq initialized patrol_scrubber iniÿå total boot 152.465 ms) ÿâtialized cactmon initialized extras_post bpmp: init complete ÿèDCE: FW Boot Done ÿá, SIZE: 0x3aef70000 I> [1] START: 0x436000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x430000200 I> EKB detected (length: 0x410) @ VA:0x430000200 I> Task: Prepare TOS params (0x500176fc) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x42ef30000 I> Task: Disable MSS perf stats (0x500259f8) I> Task: Program display sticky bits (0x50025974) I> Task: SMMU external bypass disable (0x50015bf4) I> Task: SMMU init (0x50015b10) I> Task: Program CBB PCIE AMAP regions (0x50018ce0) I> Task: Program GICv3 registers (0x50025a98) I> Task: Audit firewall settings (0x50022c08) I> MB2 finished ÿäNOTICE: BL31: v2.6(release):6363e7382 NOTICE: BL31: Built : 15:09:30, Jan 24 2023 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.19 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Jan 24 23:20:42 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: WARNING: Test OEM keys are being used! I/TC: This is only for TZ-SE testing and should NOT be used for a shipping product! I/TC: Primary CPU switching to normal world boot ÿá Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) [=3h EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 8 initializing I/TC: Secondary CPU 8 switching to normal world boot I/TC: Secondary CPU 9 initializing I/TC: Secondary CPU 9 switching to normal world boot I/TC: Secondary CPU 10 initializing I/TC: Secondary CPU 10 switching to normal world boot I/TC: Secondary CPU 11 initializing I/TC: Secondary CPU 11 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-6348-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Tue Jan 24 15:09:44 PST 2023 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: NVIDIA Orin NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: SMBIOS=0xffff0000 SMBIOS 3.0=0x427c30000 MEMATTR=0x42682d018 RNG=0x42e7ece98 MEMRESERVE=0x426835f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000411800000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000437ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000423ffffff] [ 0.000000] node 0: [mem 0x0000000424000000-0x00000004261bffff] [ 0.000000] node 0: [mem 0x00000004261c0000-0x000000042670ffff] [ 0.000000] node 0: [mem 0x0000000426710000-0x000000042673ffff] [ 0.000000] node 0: [mem 0x0000000426740000-0x000000042675ffff] [ 0.000000] node 0: [mem 0x0000000426760000-0x000000042681ffff] [ 0.000000] node 0: [mem 0x0000000426820000-0x00000004279f6fff] [ 0.000000] node 0: [mem 0x00000004279f7000-0x0000000427be4fff] [ 0.000000] node 0: [mem 0x0000000427be5000-0x0000000427c1ffff] [ 0.000000] node 0: [mem 0x0000000427c20000-0x0000000427c3ffff] [ 0.000000] node 0: [mem 0x0000000427c40000-0x000000042854ffff] [ 0.000000] node 0: [mem 0x0000000428550000-0x00000004287cffff] [ 0.000000] node 0: [mem 0x00000004287d0000-0x00000004288cffff] [ 0.000000] node 0: [mem 0x00000004288d0000-0x000000042896ffff] [ 0.000000] node 0: [mem 0x0000000428970000-0x0000000428a7ffff] [ 0.000000] node 0: [mem 0x0000000428a80000-0x0000000428b1ffff] [ 0.000000] node 0: [mem 0x0000000428b20000-0x00000004293effff] [ 0.000000] node 0: [mem 0x00000004293f0000-0x000000042977ffff] [ 0.000000] node 0: [mem 0x0000000429780000-0x000000042e79ffff] [ 0.000000] node 0: [mem 0x000000042e7a0000-0x000000042e7effff] [ 0.000000] node 0: [mem 0x000000042e7f0000-0x000000042e7fffff] [ 0.000000] node 0: [mem 0x000000042ea00000-0x000000042eefffff] [ 0.000000] node 0: [mem 0x0000000436000000-0x0000000437ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000437ffffff] [ 0.000000] On node 0, zone Normal: 256 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3809024 [ 0.000000] Kernel command line: root=/dev/initrd rw rootwait mminit_loglevel=4 console=ttyTCU0,115200 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB) [ 0.000000] Memory: 14547608K/15479808K available (18432K kernel code, 3168K rwdata, 7164K rodata, 3968K init, 1110K bss, 670056K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000649] Console: colour dummy device 80x25 [ 0.000690] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000698] pid_max: default: 32768 minimum: 301 [ 0.000766] LSM: Security Framework initializing [ 0.000789] Yama: becoming mindful. [ 0.000807] SELinux: Initializing. [ 0.000882] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000910] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.001945] rcu: Hierarchical SRCU implementation. [ 0.002034] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.002491] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/p3768/kernel-dts/tegra234-p3767-0000-p3509-a02.dts [ 0.002496] DTB Build time: Jan 24 2023 15:26:10 [ 0.003728] Tegra Revision: A01 SKU: 0xd3 CPU Process: 0 SoC Process: 0 [ 0.003949] Remapping and enabling EFI services. [ 0.005047] smp: Bringing up secondary CPUs ... [ 0.033733] Detected PIPT I-cache on CPU1 [ 0.033767] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.033796] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.062420] Detected PIPT I-cache on CPU2 [ 0.062429] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.062443] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.091040] Detected PIPT I-cache on CPU3 [ 0.091048] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.091061] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.121710] Detected PIPT I-cache on CPU4 [ 0.121733] GICv3: CPU4: found redistributor 20000 region 0:0x000000000f540000 [ 0.121760] CPU4: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.150407] Detected PIPT I-cache on CPU5 [ 0.150417] GICv3: CPU5: found redistributor 20100 region 0:0x000000000f560000 [ 0.150431] CPU5: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.179655] Detected PIPT I-cache on CPU6 [ 0.179664] GICv3: CPU6: found redistributor 20200 region 0:0x000000000f580000 [ 0.179678] CPU6: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.208901] Detected PIPT I-cache on CPU7 [ 0.208912] GICv3: CPU7: found redistributor 20300 region 0:0x000000000f5a0000 [ 0.208925] CPU7: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.208982] smp: Brought up 1 node, 8 CPUs [ 0.208996] SMP: Total of 8 processors activated. [ 0.209000] CPU features: detected: Privileged Access Never [ 0.209001] CPU features: detected: LSE atomic instructions [ 0.209003] CPU features: detected: User Access Override [ 0.209005] CPU features: detected: 32-bit EL0 Support [ 0.209007] CPU features: detected: Common not Private translations [ 0.209009] CPU features: detected: RAS Extension Support [ 0.209010] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.209011] CPU features: detected: CRC32 instructions [ 0.209013] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.241773] CPU: All CPU(s) started at EL2 [ 0.243689] devtmpfs: initialized [ 0.257642] Registered cp15_barrier emulation handler [ 0.257649] Registered setend emulation handler [ 0.257654] KASLR enabled [ 0.257761] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.257771] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.259242] pinctrl core: initialized pinctrl subsystem [ 0.259776] SMBIOS 3.0.0 present. [ 0.259784] DMI: Unknown NVIDIA Orin NX Developer Kit/NVIDIA Orin NX Developer Kit, BIOS 2.1-32413640 01/24/2023 [ 0.260054] NET: Registered protocol family 16 [ 0.260870] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.260976] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.261074] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.261097] audit: initializing netlink subsys (disabled) [ 0.261174] audit: type=2000 audit(0.260:1): state=initialized audit_enabled=0 res=1 [ 0.261334] thermal_sys: Registered thermal governor 'step_wise' [ 0.261336] thermal_sys: Registered thermal governor 'power_allocator' [ 0.261339] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.262102] cpuidle: using governor menu [ 0.262191] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.262277] ASID allocator initialised with 32768 entries [ 0.262364] Serial: AMBA PL011 UART driver [ 0.264151] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.264172] Tegra reboot handler registered. [ 0.281827] mc: mapped MMIO address: 0xffff800010b30000 -> 0x2c10000 [ 0.281838] mc: mapped MMIO address: 0xffff800010b50000 -> 0x2c20000 [ 0.281846] mc: mapped MMIO address: 0xffff800010b70000 -> 0x2c30000 [ 0.281851] mc: mapped MMIO address: 0xffff800010b90000 -> 0x2c40000 [ 0.281857] mc: mapped MMIO address: 0xffff800010bb0000 -> 0x2c50000 [ 0.281862] mc: mapped MMIO address: 0xffff800010bd0000 -> 0x2b80000 [ 0.281868] mc: mapped MMIO address: 0xffff800010bf0000 -> 0x2b90000 [ 0.281875] mc: mapped MMIO address: 0xffff800010c10000 -> 0x2ba0000 [ 0.281881] mc: mapped MMIO address: 0xffff800010c30000 -> 0x2bb0000 [ 0.281885] mc: mapped MMIO address: 0xffff800010c50000 -> 0x1700000 [ 0.281890] mc: mapped MMIO address: 0xffff800010c70000 -> 0x1710000 [ 0.281895] mc: mapped MMIO address: 0xffff800010c90000 -> 0x1720000 [ 0.281900] mc: mapped MMIO address: 0xffff800010cb0000 -> 0x1730000 [ 0.281905] mc: mapped MMIO address: 0xffff800010cd0000 -> 0x1740000 [ 0.281913] mc: mapped MMIO address: 0xffff800010cf0000 -> 0x1750000 [ 0.281918] mc: mapped MMIO address: 0xffff800010d10000 -> 0x1760000 [ 0.281923] mc: mapped MMIO address: 0xffff800010d30000 -> 0x1770000 [ 0.281931] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.281949] mc-err: mcerr ops are set to t23x [ 0.282573] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 62, base_baud = 0) is a SBSA [ 0.286349] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.286353] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.286355] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.286356] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.288027] ACPI: Interpreter disabled. [ 0.288403] ddr-vddq: supplied by vdd-5v [ 0.288570] ddr-vdd2: supplied by vdd-5v [ 0.288666] vdd-AO-1v2: supplied by vdd-5v [ 0.288764] vdd-3v3: supplied by vdd-5v [ 0.288866] vdd-rtc: supplied by vdd-AO-1v2 [ 0.288943] vdd-0v95-uphy: supplied by vdd-AO-1v2 [ 0.289037] vdd-0v95-hdmi: supplied by vdd-AO-1v2 [ 0.289244] vdd-1v8: supplied by vdd-3v3-sys [ 0.289328] vdd-3v3-AO: supplied by vdd-5v-sys [ 0.289410] vdd-av10-hub: supplied by vdd-5v-sys [ 0.289507] vdd-vbus-a: supplied by vdd-5v-sys [ 0.289591] vdd-vbus-b: supplied by vdd-5v-sys [ 0.289732] vdd-3v3-dp: supplied by vdd-3v3-sys [ 0.289955] iommu: Default domain type: Translated [ 0.289986] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.290143] SCSI subsystem initialized [ 0.290208] usbcore: registered new interface driver usbfs [ 0.290220] usbcore: registered new interface driver hub [ 0.290232] usbcore: registered new device driver usb [ 0.290416] mc: Linux media interface: v0.10 [ 0.290425] videodev: Linux video capture interface: v2.00 [ 0.290576] pps_core: LinuxPPS API ver. 1 registered [ 0.290578] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.290583] PTP clock support registered [ 0.290823] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 0.290853] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 0.292174] Registered efivars operations [ 0.292670] FPGA manager framework [ 0.292712] Advanced Linux Sound Architecture Driver Initialized. [ 0.293003] Bluetooth: Core ver 2.22 [ 0.293017] NET: Registered protocol family 31 [ 0.293019] Bluetooth: HCI device and connection manager initialized [ 0.293026] Bluetooth: HCI socket layer initialized [ 0.293031] Bluetooth: L2CAP socket layer initialized [ 0.293040] Bluetooth: SCO socket layer initialized [ 0.293550] camchar: rtcpu character device driver loaded [ 0.293777] clocksource: Switched to clocksource arch_sys_counter [ 0.447733] VFS: Disk quotas dquot_6.6.0 [ 0.447772] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.447911] pnp: PnP ACPI: disabled [ 0.450314] la/ptsa driver initialized. [ 0.450370] NET: Registered protocol family 2 [ 0.450571] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.452769] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.452790] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.452904] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.453409] TCP: Hash tables configured (established 131072 bind 65536) [ 0.453475] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.453511] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.453603] NET: Registered protocol family 1 [ 0.453817] RPC: Registered named UNIX socket transport module. [ 0.453821] RPC: Registered udp transport module. [ 0.453822] RPC: Registered tcp transport module. [ 0.453824] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.453831] PCI: CLS 0 bytes, default 64 [ 0.453932] Trying to unpack rootfs image as initramfs... [ 0.666149] Freeing initrd memory: 20672K [ 0.668036] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.668198] kvm [1]: IPA Size Limit: 48 bits [ 0.668338] kvm [1]: VHE mode initialized successfully [ 0.668974] Initialise system trusted keyrings [ 0.669081] workingset: timestamp_bits=46 max_order=22 bucket_order=0 [ 0.671285] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.671567] NFS: Registering the id_resolver key type [ 0.671578] Key type id_resolver registered [ 0.671580] Key type id_legacy registered [ 0.671612] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.671620] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.671631] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.683679] NET: Registered protocol family 38 [ 0.683685] Key type asymmetric registered [ 0.683689] Asymmetric key parser 'x509' registered [ 0.683711] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.683758] io scheduler mq-deadline registered [ 0.683760] io scheduler kyber registered [ 0.687434] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.687458] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.687471] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.689869] tegra_dc_assign_hw_data: no matching compatible node [ 0.689872] tegradccommon module_init failed [ 0.689875] tegradc module_init failed [ 0.690119] EINJ: ACPI disabled. [ 0.691573] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.691582] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 0.691586] tegra-pmc: ### PMC reset level: L0 [ 0.691588] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.693047] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.699833] random: fast init done [ 0.700861] printk: console [ttyTCU0] enabled [ 2.198192] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.203857] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.208405] arm-smmu 12000000.iommu: stage 1 translation [ 2.213730] arm-smmu 12000000.iommu: stage 2 translation [ 2.219240] arm-smmu 12000000.iommu: nested translation [ 2.224406] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.231579] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 2.240272] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.244616] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.251177] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.258577] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.264213] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.268938] arm-smmu 10000000.iommu: stage 1 translation [ 2.274449] arm-smmu 10000000.iommu: stage 2 translation [ 2.279873] arm-smmu 10000000.iommu: nested translation [ 2.285300] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.292478] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 2.301156] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.305688] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.312249] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.319232] arm-smmu 8000000.iommu: probing hardware configuration... [ 2.325380] arm-smmu 8000000.iommu: SMMUv2 with: [ 2.330105] arm-smmu 8000000.iommu: stage 1 translation [ 2.335612] arm-smmu 8000000.iommu: stage 2 translation [ 2.341036] arm-smmu 8000000.iommu: nested translation [ 2.346198] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 2.353375] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 2.362078] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 2.366586] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.373148] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.380498] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.389234] tegra_profiler: version: 1.150, samples/io: 50/29 [ 2.393356] tegra_profiler: auth: init [ 2.397423] nvsciipc: loaded module [ 2.401775] tegra23x-qspi 3270000.spi: Adding to iommu group 0 [ 2.406826] tegra23x-qspi 3270000.spi: Node prod_c_nonsecure has invalid entries [ 2.414102] tegra23x-qspi 3270000.spi: Node prod_c_nonsecure: Child has not proper setting [ 2.422327] tegra23x-qspi 3270000.spi: Node spi: Faild to read the Prod Setting. [ 2.429764] tegra23x-qspi 3270000.spi: Prod settings list not found [ 2.436577] tun: Universal TUN/TAP device driver, 1.6 [ 2.441590] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.448404] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.453933] e1000e: Intel(R) PRO/1000 Network Driver [ 2.458899] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.464779] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.470101] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.475853] PPP generic driver version 2.4.2 [ 2.480039] PPP BSD Compression module registered [ 2.484720] PPP Deflate Compression module registered [ 2.489892] PPP MPPE Compression module registered [ 2.494883] usbcore: registered new interface driver r8152 [ 2.500211] usbcore: registered new interface driver asix [ 2.505727] usbcore: registered new interface driver ax88179_178a [ 2.511841] usbcore: registered new interface driver cdc_ether [ 2.517792] usbcore: registered new interface driver net1080 [ 2.523393] usbcore: registered new interface driver cdc_subset [ 2.529427] usbcore: registered new interface driver zaurus [ 2.535126] usbcore: registered new interface driver cdc_ncm [ 2.540806] usbcore: registered new interface driver aqc111 [ 2.546344] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.552533] ohci-pci: OHCI PCI platform driver [ 2.556826] ohci-platform: OHCI generic platform driver [ 2.562182] tegra-xusb 3610000.xhci: Adding to iommu group 1 [ 2.568142] usbcore: registered new interface driver uas [ 2.573111] usbcore: registered new interface driver usb-storage [ 2.579104] tegra-xudc 3550000.xudc: Adding to iommu group 2 [ 2.584809] mousedev: PS/2 mouse device common for all mice [ 2.590258] usbcore: registered new interface driver xpad [ 2.597494] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.601023] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:53 UTC (53) [ 2.608800] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.615071] i2c /dev entries driver [ 2.618624] tegra-i2c 3160000.i2c: Adding to iommu group 3 [ 2.624188] tegra-i2c c240000.i2c: Adding to iommu group 3 [ 2.629588] tegra-i2c 3180000.i2c: Adding to iommu group 3 [ 2.634997] tegra-i2c 3190000.i2c: Adding to iommu group 3 [ 2.640333] tegra-i2c 31b0000.i2c: Adding to iommu group 3 [ 2.645840] tegra-i2c 31c0000.i2c: Adding to iommu group 3 [ 2.651271] tegra-i2c c250000.i2c: Adding to iommu group 3 [ 2.656605] tegra-i2c 31e0000.i2c: Adding to iommu group 3 [ 2.665720] device-mapper: uevent: version 1.0.3 [ 2.666634] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.676082] sdhci: Secure Digital Host Controller Interface driver [ 2.681242] sdhci: Copyright(c) Pierre Ossman [ 2.685527] Synopsys Designware Multimedia Card Interface Driver [ 2.691642] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.697860] sdhci-tegra 3400000.sdhci: Adding to iommu group 4 [ 2.698011] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 2.710718] tegra-bpmp bpmp: firmware: 9a7bb16aee9be45a56e6-ccd7dae126b [ 2.718489] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 2.722443] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x82 [ 2.733072] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 2.733261] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful ÿâFailed to create /rm/vdd_cpu Failed to create /rm/vdd_cpu debugfs initialized ÿá[ 4.416876] hid: raw HID events driver (C) Jiri Kosina [ 4.417501] usbcore: registered new interface driver usbhid [ 4.417670] usbhid: USB HID core driver [ 4.418205] tegra-dce d800000.dce: Adding to iommu group 5 [ 4.419870] dce: dce_ipc_channel_init:314 Invalid Channel State [0x0] for ch_type [2] [ 4.420820] tegra234-aon c000000.aon: Adding to iommu group 6 [ 4.421585] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 4.421881] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [0]. Ignored... [ 4.422124] dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0] [ 4.422443] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x1] [ 4.422708] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [1] ... [ 4.422710] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored... [ 4.422726] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored... [ 4.422925] dce: dce_admin_setup_clients_ipc:529 Get queue info failed for [2] [ 4.423397] c000000.aon:hsp: probed [ 4.428735] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2] [ 4.430070] tegra234-aon c000000.aon: init done [ 4.437464] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [3] ... [ 4.437468] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored... [ 4.437478] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored... [ 4.442514] tegra23x-psc e860000.psc: Adding to iommu group 7 [ 4.450650] dce: dce_start_boot_flow:173 DCE_BOOT_DONE [ 4.459244] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 4.484524] tegra23x-psc e860000.psc: init done [ 4.489413] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 8 [ 4.496295] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 4.507181] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.512503] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.523449] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.534414] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.545621] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.557363] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.569881] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.582072] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (111) [ 4.587955] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.596251] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=10150ec03f8849d1537396903b70d4a48a255aba [ 4.609133] t19x_cache tegra-cache: probed [ 4.611359] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 4.622502] optee: probing for conduit method. [ 4.622633] optee: revision 3.19 (18d0f61b) [ 4.622732] optee: dynamic shared memory is enabled [ 4.630859] optee: initialized driver [ 4.645884] nvpmodel: initialized successfully [ 4.646093] tegra_hv: get_hvd: not initialized yet [ 4.646239] user_ivc_mempool: hypervisor not present [ 4.649097] usbcore: registered new interface driver snd-usb-audio [ 4.655600] u32 classifier [ 4.657684] input device check on [ 4.661364] Actions configured [ 4.664761] Initializing XFRM netlink socket [ 4.669522] NET: Registered protocol family 10 [ 4.674804] Segment Routing with IPv6 [ 4.677067] NET: Registered protocol family 17 [ 4.681424] NET: Registered protocol family 15 [ 4.685836] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.699271] Bluetooth: RFCOMM socket layer initialized [ 4.704080] Bluetooth: RFCOMM ver 1.11 [ 4.708006] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.713867] Bluetooth: HIDP socket layer initialized [ 4.719446] 9pnet: Installing 9P2000 support [ 4.723282] Key type dns_resolver registered [ 4.727866] registered taskstats version 1 [ 4.731725] Loading compiled-in X.509 certificates [ 4.747931] Loaded X.509 cert 'Build time autogenerated kernel key: d2e6b29ce3ba3f3d31103e414d71889f8474be7b' [ 4.748575] tegra194-pcie 14100000.pcie: Adding to iommu group 9 [ 4.758960] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 4.759820] tegra194-pcie 14160000.pcie: Adding to iommu group 10 [ 4.770963] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 4.771568] tegra194-pcie 140a0000.pcie: Adding to iommu group 11 [ 4.783002] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 4.809060] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 12 [ 4.812308] host1x 13e40000.host1x: Adding to iommu group 13 [ 5.824175] t23x_init_gating_regs: Timed out waiting for syncpt ram init! [ 5.838175] host1x 13e40000.host1x: initialized [ 5.838723] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 14 [ 5.839247] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000) [ 5.840927] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 15 [ 5.841402] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000) [ 5.843061] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 16 [ 5.843484] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000) [ 5.845090] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 17 [ 5.845502] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.847103] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 18 [ 5.847549] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.849144] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 19 [ 5.849568] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.860282] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 20 [ 5.866787] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.878318] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 21 [ 5.884806] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.896383] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 22 [ 5.902872] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000) [ 5.914365] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 23 [ 5.920876] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000) [ 5.932374] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 24 [ 5.938886] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000) [ 5.950398] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 25 [ 5.956908] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000) [ 5.968439] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 26 [ 5.974929] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000) [ 5.986444] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 27 [ 5.992983] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000) [ 6.004481] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 28 [ 6.010995] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000) [ 6.022510] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 29 [ 6.029046] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000) [ 6.040559] falcon 15340000.vic: Adding to iommu group 30 [ 6.053210] falcon 15340000.vic: initialized [ 6.053663] falcon 15380000.nvjpg: Adding to iommu group 31 [ 6.060053] falcon 15380000.nvjpg: initialized [ 6.060313] falcon 15540000.nvjpg1: Adding to iommu group 32 [ 6.069759] falcon 15540000.nvjpg1: initialized [ 6.070033] falcon 154c0000.nvenc: Adding to iommu group 33 [ 6.083169] falcon 154c0000.nvenc: initialized [ 6.083431] falcon 15a50000.ofa: Adding to iommu group 34 [ 6.090711] falcon 15a50000.ofa: initialized [ 6.090979] nvdec 15480000.nvdec: Adding to iommu group 35 [ 6.107238] nvdec 15480000.nvdec: initialized [ 6.107515] tsec 15500000.tsec: Adding to iommu group 36 [ 6.116131] tsec 15500000.tsec: initialized [ 6.119190] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.129169] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.137322] gpio-397 (camera-control-output-low): hogged as output/low [ 6.137531] gpio-486 (camera-control-output-low): hogged as output/low [ 6.138727] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 6.142509] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 6.148665] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.154975] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 6.160486] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.167966] tegra194-isp5 14800000.isp: Adding to iommu group 37 [ 6.174159] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.180503] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 6.186633] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.195555] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.204906] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 38 [ 6.212746] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 39 [ 6.219767] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 6.228612] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 6.234843] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 6.244308] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 6.250846] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.260219] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 6.266631] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 40 [ 6.275007] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000) [ 6.285860] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 41 [ 6.294397] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000) [ 6.305090] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 42 [ 6.313442] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000) [ 6.317223] random: crng init done [ 6.324370] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 43 [ 6.336134] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000) [ 6.346838] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 44 [ 6.355374] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000) [ 6.366084] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 45 [ 6.374635] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000) [ 6.385352] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 46 [ 6.393916] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000) [ 6.404592] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 47 [ 6.413125] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000) [ 6.423850] pva 16000000.pva0: Adding to iommu group 48 [ 6.433709] pva 16000000.pva0: initialized [ 6.444791] nvdla 15880000.nvdla0: Adding to iommu group 49 [ 6.449713] nvdla 15880000.nvdla0: initialized [ 6.451544] nvdla 158c0000.nvdla1: Adding to iommu group 50 [ 6.455835] nvdla 158c0000.nvdla1: initialized [ 6.457603] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 3 [ 6.460500] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 6.466720] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.473015] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.479634] serial-tegra 3100000.serial: Adding to iommu group 3 [ 6.485813] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 16, base_baud = 0) is a TEGRA_UART [ 6.494810] serial-tegra 3130000.serial: Adding to iommu group 3 [ 6.500765] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 60, base_baud = 0) is a TEGRA_UART [ 6.509383] serial-tegra 3140000.serial: Adding to iommu group 3 [ 6.515469] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 61, base_baud = 0) is a TEGRA_UART [ 6.524303] tegra23x-qspi 3270000.spi: Node prod_c_nonsecure has invalid entries [ 6.531466] tegra23x-qspi 3270000.spi: Node prod_c_nonsecure: Child has not proper setting [ 6.539776] tegra23x-qspi 3270000.spi: Node spi: Faild to read the Prod Setting. [ 6.547212] tegra23x-qspi 3270000.spi: Prod settings list not found [ 6.577854] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release [ 6.578105] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.578263] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.579296] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 6.585492] tegra-xusb 3610000.xhci: irq 228, io mem 0x03610000 [ 6.591695] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.599536] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.606799] usb usb1: Product: xHCI Host Controller [ 6.611783] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.617908] usb usb1: SerialNumber: 3610000.xhci [ 6.623386] hub 1-0:1.0: USB hub found [ 6.626601] hub 1-0:1.0: 4 ports detected [ 6.630838] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.636032] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.643642] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.651062] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.659221] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.666475] usb usb2: Product: xHCI Host Controller [ 6.671458] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.677670] usb usb2: SerialNumber: 3610000.xhci [ 6.682821] hub 2-0:1.0: USB hub found [ 6.686092] hub 2-0:1.0: 4 ports detected [ 6.710512] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.710934] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.711064] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.711528] tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event probing [ 6.727141] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 2004000 KHz, changing to: 1984000 KHz [ 6.730044] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2075000 KHz, changing to: 1984000 KHz [ 6.737450] tegra194-cpufreq e000000.ccplex: probed with ICC [ 6.743828] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.745431] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 6.749572] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 6.760191] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 6.761806] irq: IRQ292: trimming hierarchy from :interrupt-controller@f400000-1 [ 6.768589] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 6.768593] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 6.776234] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 292 [ 6.893925] usb 1-3: new high-speed USB device number 2 using tegra-xusb [ 7.069387] usb 1-3: New USB device found, idVendor=0bda, idProduct=5423, bcdDevice= 1.01 [ 7.069639] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.069853] usb 1-3: Product: 4-Port USB 2.0 Hub [ 7.069986] usb 1-3: Manufacturer: Generic [ 7.072995] hub 1-3:1.0: USB hub found [ 7.075924] hub 1-3:1.0: 4 ports detected [ 7.377926] usb 1-3.2: new high-speed USB device number 3 using tegra-xusb [ 7.523006] usb 1-3.2: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00 [ 7.523247] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.523446] usb 1-3.2: Product: USB DISK [ 7.523554] usb 1-3.2: Manufacturer: SMI Corporation [ 7.523697] usb 1-3.2: SerialNumber: CCBYMMDDHHmmSSLSB3XY [ 7.524121] usb 1-3.2: rejected 1 configuration due to insufficient available bus power [ 7.524339] usb 1-3.2: no configuration chosen from 1 choice [ 7.605922] usb 1-3.3: new full-speed USB device number 4 using tegra-xusb [ 7.714894] usb 1-3.3: New USB device found, idVendor=062a, idProduct=4101, bcdDevice= 1.17 [ 7.715132] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.715337] usb 1-3.3: Product: 2.4G Keyboard Mouse [ 7.715488] usb 1-3.3: Manufacturer: MOSART Semi. [ 7.721588] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/3610000.xhci/usb1/1-3/1-3.3/1-3.3:1.0/0003:062A:4101.0001/input/input0 [ 7.782438] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-3610000.xhci-3.3/input0 [ 7.786594] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/3610000.xhci/usb1/1-3/1-3.3/1-3.3:1.1/0003:062A:4101.0002/input/input1 [ 7.787524] input: MOSART Semi. 2.4G Keyboard Mouse Consumer Control as /devices/platform/3610000.xhci/usb1/1-3/1-3.3/1-3.3:1.1/0003:062A:4101.0002/input/input2 [ 7.846163] input: MOSART Semi. 2.4G Keyboard Mouse System Control as /devices/platform/3610000.xhci/usb1/1-3/1-3.3/1-3.3:1.1/0003:062A:4101.0002/input/input3 [ 7.846820] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/3610000.xhci/usb1/1-3/1-3.3/1-3.3:1.1/0003:062A:4101.0002/input/input4 [ 7.847817] hid-generic 0003:062A:4101.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-3610000.xhci-3.3/input1 [ 7.882090] tegra194-pcie 14100000.pcie: Phy link never came up [ 7.882327] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 7.882506] pci_bus 0001:00: root bus resource [bus 00-ff] [ 7.882652] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 7.882906] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 7.883190] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 7.883442] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 7.883768] pci 0001:00:00.0: PME# supported from D0 D3hot [ 7.891320] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 7.891466] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 7.891938] pcieport 0001:00:00.0: Adding to iommu group 9 [ 7.892282] pcieport 0001:00:00.0: PME: Signaling with IRQ 54 [ 7.892891] pcieport 0001:00:00.0: AER: enabled with IRQ 54 [ 7.893255] pci_bus 0001:01: busn_res: [bus 01-ff] is released [ 7.893484] pci 0001:00:00.0: Removing from iommu group 9 [ 7.895454] pci_bus 0001:00: busn_res: [bus 00-ff] is released [ 7.903143] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 7.908685] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 7.914526] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 7.923188] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 7.929786] usb 1-3.4: new high-speed USB device number 5 using tegra-xusb [ 7.931844] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 8.043392] usb 1-3.4: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.10 [ 8.043631] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.043859] usb 1-3.4: Product: DataTraveler 3.0 [ 8.043992] usb 1-3.4: Manufacturer: Kingston [ 8.044132] usb 1-3.4: SerialNumber: E0D55E6CBC98E5C118920AE4 [ 8.044544] usb 1-3.4: rejected 1 configuration due to insufficient available bus power [ 8.044755] usb 1-3.4: no configuration chosen from 1 choice [ 9.046082] tegra194-pcie 14160000.pcie: Phy link never came up [ 9.046316] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 9.046514] pci_bus 0004:00: root bus resource [bus 00-ff] [ 9.046672] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 9.046958] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 9.047261] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 9.047538] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 9.047861] pci 0004:00:00.0: PME# supported from D0 D3hot [ 9.055078] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 9.055232] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 9.055679] pcieport 0004:00:00.0: Adding to iommu group 10 [ 9.056016] pcieport 0004:00:00.0: PME: Signaling with IRQ 56 [ 9.056641] pcieport 0004:00:00.0: AER: enabled with IRQ 56 [ 9.057148] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 9.057377] pci 0004:00:00.0: Removing from iommu group 10 [ 9.057516] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 9.062393] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 9.067178] vdd-3v3-sd: supplied by vdd-3v3 [ 9.071293] irq: IRQ293: trimming hierarchy from :pmc@c360000 [ 9.077325] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 9.078495] tegra194-isp5 14800000.isp: initialized [ 9.092087] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 9.096057] (NULL device *): fops function table already registered [ 9.102924] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 9.109035] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 9.109125] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 9.114878] irq: IRQ294: trimming hierarchy from :interrupt-controller@f400000-1 [ 9.133973] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 292 [ 9.234840] tegra194-pcie 140a0000.pcie: host bridge /pcie@140a0000 ranges: [ 9.235057] tegra194-pcie 140a0000.pcie: IO 0x002a100000..0x002a1fffff -> 0x002a100000 [ 9.235308] tegra194-pcie 140a0000.pcie: MEM 0x3528000000..0x352fffffff -> 0x0040000000 [ 9.235565] tegra194-pcie 140a0000.pcie: MEM 0x3240000000..0x3527ffffff -> 0x3240000000 [ 9.341922] tegra194-pcie 140a0000.pcie: Link up [ 9.344213] tegra194-pcie 140a0000.pcie: PCI host bridge to bus 0008:00 [ 9.344414] pci_bus 0008:00: root bus resource [bus 00-ff] [ 9.344569] pci_bus 0008:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x2a100000-0x2a1fffff]) [ 9.344826] pci_bus 0008:00: root bus resource [mem 0x3528000000-0x352fffffff] (bus address [0x40000000-0x47ffffff]) [ 9.345102] pci_bus 0008:00: root bus resource [mem 0x3240000000-0x3527ffffff pref] [ 9.345352] pci 0008:00:00.0: [10de:229c] type 01 class 0x060400 [ 9.345654] pci 0008:00:00.0: PME# supported from D0 D3hot [ 9.349845] pci 0008:01:00.0: [10ec:8168] type 00 class 0x020000 [ 9.350139] pci 0008:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 9.350465] pci 0008:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 9.350747] pci 0008:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 9.351939] pci 0008:01:00.0: supports D1 D2 [ 9.352049] pci 0008:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 9.356357] pci 0008:00:00.0: BAR 14: assigned [mem 0x3528000000-0x35280fffff] [ 9.356546] pci 0008:00:00.0: BAR 13: assigned [io 0x200000-0x200fff] [ 9.356992] pci 0008:01:00.0: BAR 4: assigned [mem 0x3528000000-0x3528003fff 64bit] [ 9.364787] pci 0008:01:00.0: BAR 2: assigned [mem 0x3528004000-0x3528004fff 64bit] [ 9.372659] pci 0008:01:00.0: BAR 0: assigned [io 0x200000-0x2000ff] [ 9.379158] pci 0008:00:00.0: PCI bridge to [bus 01-ff] [ 9.384382] pci 0008:00:00.0: bridge window [io 0x200000-0x200fff] [ 9.390770] pci 0008:00:00.0: bridge window [mem 0x3528000000-0x35280fffff] [ 9.398130] pci 0008:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 9.406669] pci 0008:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 9.415351] pcieport 0008:00:00.0: Adding to iommu group 11 [ 9.420987] pcieport 0008:00:00.0: PME: Signaling with IRQ 58 [ 9.427019] pcieport 0008:00:00.0: AER: enabled with IRQ 58 [ 9.433268] irq: IRQ296: trimming hierarchy from :pmc@c360000 [ 9.438007] irq: IRQ297: trimming hierarchy from :interrupt-controller@f400000-1 [ 9.445398] input: gpio-keys as /devices/platform/gpio-keys/input/input5 [ 9.452677] tegra-se-nvhost 15810000.se: Adding to iommu group 51 [ 9.458646] tegra-se-nvhost 15810000.se: initialized [ 9.472550] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 9.472803] tegra-se-nvhost 15820000.se: Adding to iommu group 52 [ 9.475825] tegra-se-nvhost 15820000.se: initialized [ 9.482975] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 9.486576] tegra-se-nvhost 15840000.se: Adding to iommu group 53 [ 9.493070] tegra-se-nvhost 15840000.se: initialized [ 9.499991] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 9.504435] tegra_actmon d230000.actmon: in actmon_register()... [ 9.510095] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 9.515656] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 9.523469] hvc_sysfs: hypervisor is not present [ 9.562595] ALSA device list: [ 9.562686] No soundcards found. [ 9.563418] Freeing unused kernel memory: 3968K [ 9.577801] Run /init as init process [ 9.590636] Root device found: initrd [ 9.591097] Mount initrd as rootfs and enter recovery mode enable_remote_access enable remote access insmod /lib/modules/5.10.104-tegra/kernel/drivers/mtd/mtd.ko insmod /lib/modules/5.10.104-tegra/kernel/drivers/mtd/devices/qspi_mtd.ko [ 9.602434] qspi_mtd spi6.0: MX25U51279G (65536 Kbytes) [ 9.602566] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x4000000 (64MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 9.606696] 1 fixed-partitions partitions found on MTD device spi6.0 [ 9.606869] Creating 1 MTD partitions on "spi6.0": [ 9.606997] 0x000000000000-0x000004000000 : "Whole_flash0" insmod /lib/modules/5.10.104-tegra/kernel/drivers/spi/spi-tegra210-qspi.ko insmod /lib/modules/5.10.104-tegra/kernel/drivers/hwmon/pwm-fan.ko [ 10.178546] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit Connection timeout: device /dev/nvme0n1 is still not ready. [ 19.637007] using random self ethernet address [ 19.637145] using random host ethernet address [ 19.640198] Mass Storage Function, version: 2009/09/11 [ 19.640344] LUN: removable file: (no medium) [ 19.641810] LUN: removable file: (no medium) [ 19.642949] LUN: removable file: (no medium) [ 19.644029] LUN: removable file: (no medium) Connection timeout: device /dev/nvme0n1 is still not ready. [ 19.646395] rndis0: HOST MAC b6:cd:2a:aa:f3:55 [ 19.646509] rndis0: MAC 9e:65:8f:48:6b:ba [ 19.647634] tegra-xudc 3550000.xudc: EP 0 (type: ctrl, dir: out) enabled bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell bash-5.0# [ 20.050800] tegra-xudc 3550000.xudc: EP 5 (type: intr, dir: in) enabled [ 20.051021] tegra-xudc 3550000.xudc: EP 3 (type: bulk, dir: in) enabled [ 20.051218] tegra-xudc 3550000.xudc: EP 2 (type: bulk, dir: out) enabled [ 20.051519] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 20.051659] tegra-xudc 3550000.xudc: EP 7 (type: bulk, dir: in) enabled [ 20.051937] tegra-xudc 3550000.xudc: EP 4 (type: bulk, dir: out) enabled [ 89.057070] NFS: state manager: check lease failed on NFSv4 server fc00:1:1:0::1 with error 13 [ 94.175178] NFS: state manager: check lease failed on NFSv4 server fc00:1:1:0::1 with error 13 [ 99.295537] NFS: state manager: check lease failed on NFSv4 server fc00:1:1:0::1 with error 13 [ 104.415560] NFS: state manager: check lease failed on NFSv4 server fc00:1:1:0::1 with error 13 [ 109.536005] NFS: state manager: check lease failed on NFSv4 server fc00:1:1:0::1 with error 13 [ 114.655716] NFS: state manager: check lease failed on NFSv4 server fc00:1:1:0::1 with error 13