=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2022.07.28 10:53:56 =~=~=~=~=~=~=~=~=~=~=~= [0000.256] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-7d3edb9d) [0000.265] I> bit @ 0xd480000 [0000.268] I> Boot-device: eMMC [0000.275] I> sdmmc bdev is already initialized [0000.280] I> pmic: reset reason (nverc) : 0x50 [0000.311] I> Found 18 partitions in SDMMC_BOOT (instance 3) [0000.330] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.336] W> No valid slot number is found in scratch register [0000.342] W> Return default slot: _a [0000.345] I> A/B: bin_type (16) slot 0 [0000.349] I> Loading partition bpmp-fw at 0xd7800000 [0000.354] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.359] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.384] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.389] W> No valid slot number is found in scratch register [0000.395] W> Return default slot: _a [0000.399] I> A/B: bin_type (17) slot 0 [0000.402] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.407] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.413] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.436] I> Binary(17) of size 465840 is loaded @ 0xd798e200 [0000.616] I> Loading SCE-FW ... [0000.619] W> No valid slot number is found in scratch register [0000.624] W> Return default slot: _a [0000.628] I> A/B: bin_type (12) slot 0 [0000.631] I> Loading partition sce-fw at 0xd7300000 [0000.636] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.642] I> Addr: 0xd7300000, start-block: 58784120, num_blocks: 1 [0000.661] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.666] I> Init SCE [0000.669] I> Loading APE-FW ... [0000.672] W> No valid slot number is found in scratch register [0000.677] W> Return default slot: _a [0000.681] I> A/B: bin_type (11) slot 0 [0000.684] I> Loading partition adsp-fw at 0xd7400000 [0000.689] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.695] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.714] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.720] I> Copy BTCM section [0000.723] W> No valid slot number is found in scratch register [0000.728] W> Return default slot: _a [0000.732] I> A/B: bin_type (13) slot 0 [0000.735] I> Loading partition cpu-bootloader at 0x96000000 [0000.741] I> Reading two headers - addr:0x96000000 blocks:1 [0000.746] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.768] I> Binary(13) of size 283728 is loaded @ 0x96000000 [0000.773] W> No valid slot number is found in scratch register [0000.779] W> Return default slot: _a [0000.782] I> A/B: bin_type (20) slot 0 [0000.786] I> Loading partition bootloader-dtb at 0x8520f400 [0000.791] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.797] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.819] I> Binary(20) of size 343232 is loaded @ 0x8520f400 [0000.825] W> No valid slot number is found in scratch register [0000.830] W> Return default slot: _a [0000.834] I> A/B: bin_type (14) slot 0 [0000.837] I> Loading partition secure-os at 0x8530f600 [0000.842] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.848] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.869] I> Binary(14) of size 312752 is loaded @ 0x8530f600 [0000.877] I> TOS boot-params @ 0x85000000 [0000.881] I> TOS params prepared [0000.884] I> Loading EKS ... [0000.887] I> A/B: bin_type (15) slot 0 [0000.890] I> Loading partition eks at 0x8590f800 [0000.895] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.900] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0000.919] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.925] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.930] I> Copied encrypted keys [0000.933] I> boot profiler @ 0x275844000 [0000.937] I> boot profiler for TOS @ 0x275844000 [0000.942] I> Unhalting SCE [0000.945] I> Primary Memory Start:80000000 Size:70000000 [0000.950] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.957] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):23b153a63 NOTICE: BL31: Built : 22:43:09, Dec 9 2019 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! keystore-demo: 141: Hello world from keystore-demo app keystore-demo: 207: main: EKB contents match expected value exit called, thread 0xffffffffea87ad58, name trusty_app_2_7d18fc60-e9fc-11e8 platform_bootstrap_epilog: trusty bootstrap complete [0001.317] I> Welcome to Cboot [0001.320] I> Cboot Version: t186-c3c778fb [0001.324] I> CPU-BL Params @ 0x275800000 [0001.327] I> 0) Base:0x00000000 Size:0x00000000 [0001.332] I> 1) Base:0x277f00000 Size:0x00100000 [0001.336] I> 2) Base:0x277e00000 Size:0x00100000 [0001.341] I> 3) Base:0x277d00000 Size:0x00100000 [0001.345] I> 4) Base:0x277c00000 Size:0x00100000 [0001.350] I> 5) Base:0x277b00000 Size:0x00100000 [0001.354] I> 6) Base:0x277800000 Size:0x00200000 [0001.359] I> 7) Base:0x277400000 Size:0x00400000 [0001.363] I> 8) Base:0x277a00000 Size:0x00100000 [0001.368] I> 9) Base:0x277300000 Size:0x00100000 [0001.372] I> 10) Base:0x276800000 Size:0x00800000 [0001.377] I> 11) Base:0x30000000 Size:0x00040000 [0001.381] I> 12) Base:0xf0000000 Size:0x00100000 [0001.386] I> 13) Base:0x30040000 Size:0x00001000 [0001.390] I> 14) Base:0x30048000 Size:0x00001000 [0001.395] I> 15) Base:0x30049000 Size:0x00001000 [0001.399] I> 16) Base:0x3004a000 Size:0x00001000 [0001.403] I> 17) Base:0x3004b000 Size:0x00001000 [0001.408] I> 18) Base:0x3004c000 Size:0x00001000 [0001.412] I> 19) Base:0x3004d000 Size:0x00001000 [0001.417] I> 20) Base:0x3004e000 Size:0x00001000 [0001.421] I> 21) Base:0x3004f000 Size:0x00001000 [0001.426] I> 22) Base:0x00000000 Size:0x00000000 [0001.430] I> 23) Base:0xf0100000 Size:0x00010000 [0001.434] I> 24) Base:0x00000000 Size:0x00000000 [0001.439] I> 25) Base:0x00000000 Size:0x00000000 [0001.443] I> 26) Base:0x00000000 Size:0x00000000 [0001.448] I> 27) Base:0x00000000 Size:0x00000000 [0001.452] I> 28) Base:0x84400000 Size:0x00400000 [0001.457] I> 29) Base:0x30000000 Size:0x00010000 [0001.461] I> 30) Base:0x278000000 Size:0x08000000 [0001.466] I> 31) Base:0x00000000 Size:0x00000000 [0001.470] I> 32) Base:0x276000000 Size:0x00600000 [0001.475] I> 33) Base:0x80000000 Size:0x70000000 [0001.479] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.483] I> 35) Base:0x00000000 Size:0x00000000 [0001.488] I> 36) Base:0x00000000 Size:0x00000000 [0001.492] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.497] I> 38) Base:0x84000000 Size:0x00400000 [0001.501] I> 39) Base:0x96000000 Size:0x02000000 [0001.506] I> 40) Base:0x85000000 Size:0x01200000 [0001.510] I> 41) Base:0x275800000 Size:0x00500000 [0001.515] I> 42) Base:0x00000000 Size:0x00000000 [0001.519] I> 43) Base:0x00000000 Size:0x00000000 [0001.524] GIC-SPI Target CPU: 4 [0001.527] Interrupts Init done [0001.530] calling constructors [0001.533] initializing heap [0001.536] initializing threads [0001.539] initializing timers [0001.542] creating bootstrap completion thread [0001.547] top of bootstrap2() [0001.550] CPU: ARM Cortex A57 [0001.553] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.558] initializing platform [0001.562] I> Bl_dtb @0x8520f400 [0001.564] I> gpio framework initialized [0001.571] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.580] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.588] I> GPIO framework and drivers are initialized. [0001.593] I> Boot-device: eMMC [0001.600] I> sdmmc bdev is already initialized [0001.631] I> Found 18 partitions in SDMMC_BOOT (instance 3) [0001.648] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.654] W> opt-in fuse is not set, skip fuse_burning [0001.659] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.665] W> No valid slot number is found in scratch register [0001.670] W> Return default slot: _a [0001.674] I> A/B: bin_type (21) slot 0 [0001.677] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.694] I> Kernel_dtb @0x80000000 [0001.698] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.708] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.715] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.724] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.735] I> fixed regulator driver initialized [0001.766] I> register 'maxim' power off handle [0001.772] I> virtual i2c enabled [0001.775] I> registered 'maxim,max77620' pmic [0001.780] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.793] I> Find /i2c@c250000's alias i2c7 [0001.797] I> Reading eeprom i2c=7 address=0x50 [0001.826] I> Device at /i2c@c250000:0x50 [0001.830] I> Reading eeprom i2c=7 address=0x57 [0001.858] I> Device at /i2c@c250000:0x57 [0001.863] I> Find /i2c@c240000's alias i2c1 [0001.867] I> Reading eeprom i2c=1 address=0x51 [0001.872] E> I2C: slave not found in slaves. [0001.876] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.884] E> I2C_DEV: Failed to send register address 0x00000000. [0001.890] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.899] E> eeprom: Retry to read I2C slave device. [0001.904] E> I2C: slave not found in slaves. [0001.908] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.916] E> I2C_DEV: Failed to send register address 0x00000000. [0001.922] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.931] E> eeprom: Failed to read I2C slave device [0001.936] I> Eeprom read failed 0x3526070d [0001.941] I> Find /i2c@3160000's alias i2c0 [0001.945] I> Reading eeprom i2c=0 address=0x50 [0001.949] E> I2C: slave not found in slaves. [0001.953] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.961] E> I2C_DEV: Failed to send register address 0x00000000. [0001.967] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.976] E> eeprom: Failed to read I2C slave device [0001.981] I> Eeprom read failed 0x3526070d [0001.986] I> Find /i2c@3180000's alias i2c2 [0001.990] I> Reading eeprom i2c=2 address=0x54 [0001.994] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.025] I> Disabling gpio chip_id = 2, gpio pin = 9 [0002.030] I> Device at /i2c@3180000:0x54 [0002.034] I> Reading eeprom i2c=2 address=0x57 [0002.038] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.043] E> I2C: slave not found in slaves. [0002.048] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0002.055] E> I2C_DEV: Failed to send register address 0x00000000. [0002.061] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0002.071] E> eeprom: Failed to read I2C slave device [0002.075] I> Disabling gpio chip_id = 2, gpio pin = 9 [0002.081] I> Eeprom read failed 0x00000000 [0002.085] I> create_pm_ids: id: 3310-1000-D00-E, len: 15 [0002.090] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.101] I> create_pm_ids: id: 2597-0000-900-E, len: 15 [0002.106] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.117] I> create_pm_ids: id: 3326-1000-000-M, len: 15 [0002.122] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0002.154] I> enabling 'vdd-hdmi' regulator [0002.169] I> regulator 'vdd-hdmi' already enabled [0002.173] E> tegrabl_display_init_regulator: hdmi cable is not connected [0002.180] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.189] E> cannot find any other nvdisp nodes [0002.193] E> no valid display unit config found in dtb [0002.199] W> display init failed [0002.202] initializing target [0002.205] calling apps_init() [0002.208] starting app kernel_boot_app [0002.231] I> found decompressor handler: lz4-legacy [0002.235] I> decompressing BMP blob ... [0002.245] I> Kernel type = Normal [0002.248] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0002.263] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0002.270] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0002.277] I> ########## Fixed storage boot ########## [0002.282] I> Loading kernel from partition ... [0002.286] W> No valid slot number is found in scratch register [0002.292] W> Return default slot: _a [0002.295] I> A/B: bin_type (24) slot 0 [0002.311] I> Boot image size read from image header: f2f08 [0002.316] I> Boot image load address: 0x0x80400000 [0002.321] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.280] I> Validate kernel ... [0003.283] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0003.291] I> kernel-dtb is already loaded [0003.295] I> Validate kernel-dtb ... [0003.298] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0003.306] I> Checking boot.img header magic ... [0003.310] I> [OK] [0003.312] I> Kernel hdr @0x80400000 [0003.315] I> Kernel dtb @0x80000000 [0003.318] I> decompressor handler not found [0003.322] I> Copying kernel image (477882 bytes) from 0x80400800 to 0x80800000 ... [0003.330] I> Done [0003.331] I> Move ramdisk (len: 0) from 0x80475800 to 0x94830000 [0003.339] I> Updated bpmp info to DTB [0003.344] I> Ramdisk: Base: 0x94830000; Size: 0x0 [0003.349] I> Updated initrd info to DTB [0003.353] W> WARN: Fail to override "console=none" in commandline [0003.359] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.366] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.373] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.380] I> disabled_core_mask: 0xffffff0c [0003.384] W> No valid slot number is found in scratch register [0003.390] W> Return default slot: _a [0003.393] I> Active slot suffix: [0003.396] I> add_boot_slot_suffix: slot_suffix = [0003.401] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0003.437] I> Updated bootarg info to DTB [0003.441] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:dd:f6:8c [0003.447] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:dd:f6:8d [0003.454] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:dd:f6:8e [0003.460] E> Found no plugin manager ids in source DT [0003.465] W> Add plugin manager ids from board info [0003.469] E> "plugin-manager" doesn't exist, creating [0003.474] E> "ids" doesn't exist, creating [0003.478] E> "connection" doesn't exist, creating [0003.483] E> "configs" doesn't exist, creating [0003.487] I> create_pm_ids: id: 3310-1000-D00-E, len: 15 [0003.492] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.503] I> create_pm_ids: id: 2597-0000-900-E, len: 15 [0003.508] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.519] I> create_pm_ids: id: 3326-1000-000-M, len: 15 [0003.525] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0003.535] I> Adding plugin-manager/ids/3310-1000-D00=/i2c@c250000:module@0x50 [0003.543] E> "i2c@c250000" doesn't exist, creating [0003.547] E> "module@0x50" doesn't exist, creating [0003.552] I> Adding plugin-manager/ids/2597-0000-900=/i2c@c250000:module@0x57 [0003.560] E> "module@0x57" doesn't exist, creating [0003.565] I> Adding plugin-manager/ids/3326-1000-000=/i2c@3180000:module@0x54 [0003.572] E> "i2c@3180000" doesn't exist, creating [0003.576] E> "module@0x54" doesn't exist, creating [0003.583] I> Adding plugin-manager/ids/3310-1000-D00-E [0003.590] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.596] I> Adding plugin-manager/configs/3310-power-config 00 [0003.602] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.608] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.614] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.620] I> Adding plugin-manager/configs/3310-display-config 00 [0003.626] I> Adding plugin-manager/cvm [0003.630] E> "chip-id" doesn't exist, creating [0003.634] I> Adding plugin-manager/chip-id/A02P [0003.639] E> "odm-data" doesn't exist, creating [0003.643] I> Adding /chosen/plugin-manager/odm-data [0003.653] I> added [base:0x80000000, size:0x70000000] to /memory [0003.659] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.665] I> added [base:0x275e00000, size:0x200000] to /memory [0003.670] I> added [base:0x276600000, size:0x200000] to /memory [0003.676] I> added [base:0x277000000, size:0x200000] to /memory [0003.682] I> Updated memory info to DTB [0003.686] E> add_disp_param: failed to get display params for du=0 [0003.694] E> "reset" doesn't exist, creating [0003.698] E> "pmc-reset-reason" doesn't exist, creating [0003.704] E> "pmic-reset-reason" doesn't exist, creating [0003.710] I> Adding ecid(00000001645966462400000011038440) to DT [0003.716] I> disabled_core_mask: 0xffffff0c [0003.729] I> Add serial number:0421419031036 as DT property [0003.737] I> Plugin-manager override starting [0003.743] I> node /plugin-manager/fragement@0 matches [0003.753] I> node /plugin-manager/fragement@4 matches [0003.765] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.784] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.793] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.802] I> node /plugin-manager/fragment-devslp@0 matches [0003.819] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.832] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.842] I> node /plugin-manager/fragment-p3310-c01 matches [0003.854] I> node /plugin-manager/fragment-p3310-c03 matches [0003.887] I> node /plugin-manager/fragment-e3326@0 matches [0003.961] I> node /plugin-manager/fragment-p3310-c00-camera matches [0003.987] I> Disable plugin-manager status in FDT [0003.992] I> Plugin-manager override finished successfully [0003.997] I> tegrabl_load_kernel_and_dtb: Done [0004.001] E> tegrabl_display_clear: display is not initialized [0004.007] W> Boot logo display failed... [0004.011] I> Kernel EP: 0x80800000, DTB: 0x80000000 U-Boot 2016.07-g0536cf2a27 (Dec 09 2019 - 22:43:10 -0800) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 2  1  0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 733 bytes read in 116 ms (5.9 KiB/s) 1: primary kernel Retrieving file: /boot/initrd 5565140 bytes read in 183 ms (29 MiB/s) Retrieving file: /boot/Image 34191368 bytes read in 858 ms (38 MiB/s) append: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000080000000, end 0000000080058c55 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-1935) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Dec 9 22:52:02 PST 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 1.056014] tegra-xusb-padctl 3520000.xusb_padctl: Invalid OC pin: 2 [ 1.420894] tegra210-axbar tegra210-axbar: Can't retrieve parent clock [ 1.431521] tegra-asoc: sound: ASoC: CPU DAI ADMAIF1 not registered [ 1.437840] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 1.462660] tegra-asoc: sound: ASoC: CPU DAI ADMAIF1 not registered [ 1.468997] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 1.478285] tegra-asoc: sound: ASoC: CPU DAI ADMAIF1 not registered [ 1.484567] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 1.492403] tegra-asoc: sound: ASoC: CPU DAI ADMAIF1 not registered [ 1.498687] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 1.521507] tegra-asoc: sound: ASoC: CPU DAI ADMAIF1 not registered [ 1.527849] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 2.096170] cgroup: cgroup2: unknown option "nsdelegate" [ 2.611980] tegra-asoc: sound: ASoC: CPU DAI ADMAIF1 not registered [ 2.618273] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 2.720861] tegra-asoc: sound: ASoC: CPU DAI ADMAIF1 not registered [ 2.727414] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 3.552083] using random self ethernet address [ 3.559162] using random host ethernet address [ 3.873599] tegra-asoc: sound: ASoC: CPU DAI ADMAIF1 not registered [ 3.880783] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 3.900940] tegra-asoc: sound: ASoC: CPU DAI ADMAIF1 not registered [ 3.907479] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 3.944643] tegra-asoc: sound: ASoC: CPU DAI ADMAIF1 not registered [ 3.951009] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 4.224605] tegra-asoc: sound: ASoC: CPU DAI ADMAIF1 not registered [ 4.231121] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 4.240318] tegra-asoc: sound: ASoC: CPU DAI ADMAIF1 not registered [ 4.246624] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 4.278740] random: crng init done [ 4.282150] random: 7 urandom warning(s) missed due to ratelimiting [ 4.327396] using random self ethernet address [ 4.334131] using random host ethernet address [ 4.364980] tegra-asoc: sound: ASoC: CPU DAI ADMAIF1 not registered [ 4.374201] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 4.435219] tegra-asoc: sound: ASoC: CPU DAI ADMAIF1 not registered [ 4.435225] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 5.611277] vdd-1v8: voltage operation not allowed [ 5.616288] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 5.642574] vdd-1v8: voltage operation not allowed [ 5.647720] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 5.676725] vdd-1v8: voltage operation not allowed [ 5.681720] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 5.691036] vdd-1v8: voltage operation not allowed [ 5.696073] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 5.819858] vdd-1v8: voltage operation not allowed [ 5.824966] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 5.834475] vdd-1v8: voltage operation not allowed [ 5.839405] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 5.850584] vdd-1v8: voltage operation not allowed [ 5.855510] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 9.365688] Bridge firewalling registered Ubuntu 18.04.3 LTS uvision-desktop ttyS0 uvision-desktop login: [ 33.856762] tegra-asoc: sound: ASoC: CPU DAI ADMAIF1 not registered [ 33.863164] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 34.859227] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6 [ 34.870535] sd 2:0:0:0: [sda] 120845300 512-byte logical blocks: (61.9 GB/57.6 GiB) [ 34.878566] sd 2:0:0:0: [sda] Write Protect is off [ 34.884397] tegra-asoc: sound: ASoC: CPU DAI ADMAIF1 not registered [ 34.890773] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 34.897129] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 34.915766] sd 2:0:0:0: [sda] Attached SCSI removable disk ls Password: Ubuntu 18.04.3 LTS uvision-desktop ttyS0 uvision-desktop login: Ubuntu 18.04.3 LTS uvision-desktop ttyS0 uvision-desktop login: Ubuntu 18.04.3 LTS uvision-desktop ttyS0 uvision-desktop login: uvision Password: Last login: δΈ‰ 7月 1 17:12:57 CST 2020 from 192.168.0.145 on pts/0 Welcome to Ubuntu 18.04.3 LTS (GNU/Linux 4.9.140-tegra aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. 566 packages can be updated. 463 updates are security updates. New release '20.04.4 LTS' available. Run 'do-release-upgrade' to upgrade to it. uvision@uvision-desktop:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/mmcblk0p1 28G 17G 9.7G 63% / none 3.8G 0 3.8G 0% /dev tmpfs 3.9G 52K 3.9G 1% /dev/shm tmpfs 3.9G 21M 3.9G 1% /run tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/sda1 58G 37G 21G 65% /media/1900-2257 tmpfs 786M 0 786M 0% /run/user/1000 uvision@uvision-desktop:~$ mkditsudo mkdir OTA [sudo] password for uvision: uvision@uvision-desktop:~$ ls Desktop Downloads Music Pictures Templates Documents examples.desktop OTA Public Videos uvision@uvision-desktop:~$ sudo cat /boot/extlinux/extlinux.conf. cat: /boot/extlinux/extlinux.conf.: No such file or directory uvision@uvision-desktop:~$ cat /boot/extlinux/extlinux.conf. TIMEOUT 30 DEFAULT primary MENU TITLE L4T boot options LABEL primary MENU LABEL primary kernel LINUX /boot/Image INITRD /boot/initrd APPEND ${cbootargs} quiet # When testing a custom kernel, it is recommended that you create a backup of # the original kernel and add a new entry to this file so that the device can # fallback to the original kernel. To do this: # # 1, Make a backup of the original kernel # sudo cp /boot/Image /boot/Image.backup # # 2, Copy your custom kernel into /boot/Image # # 3, Uncomment below menu setting lines for the original kernel # # 4, Reboot # LABEL backup # MENU LABEL backup kernel # LINUX /boot/Image.backup # INITRD /boot/initrd # APPEND ${cbootargs} uvision@uvision-desktop:~$ cat /boot/extlinux/extlinux.conf /boot/extlinux/extlinux.conf /boot/extlinux/extlinux.conf /boot/extlinux/extlinux.conf s /boot/extlinux/extlinux.confu /boot/extlinux/extlinux.confd /boot/extlinux/extlinux.confo /boot/extlinux/extlinux.conf /boot/extlinux/extlinux.confv /boot/extlinux/extlinux.confi /boot/extlinux/extlinux.confm /boot/extlinux/extlinux.conf /boot/extlinux/extlinux.conf/boot/extlinux/extlinux.conf "/boot/extlinux/extlinux.conf" 29L, 733Cβ–½ TIMEOUT 30 DEFAULT primary MENU TITLE L4T boot options LABEL primaryMENU LABEL primary kernelLINUX /boot/ImageINITRD /boot/initrdAPPEND ${cbootargs} quiet # When testing a custom kernel, it is recommended that you create a backup of # the original kernel and add a new entry to this file so that the device can # fallback to the original kernel. To do this: # # 1, Make a backup of the original kernel # sudo cp /boot/Image /boot/Image.backup # # 2, Copy your custom kernel into /boot/Image # # 3, Uncomment below menu setting lines for the original kernel # # 4, Reboot1,1Top^[[2; i -- INSERT --1,1Top2345678910,1234567891012345678920123456 quiet7root=/dev/mmcblk0p1 rw rootwait rootfstype=e quiet71xt4 quiet4^[ 10,73Top::wq "/boot/extlinux/extlinux.conf" 29L, 781C written uvision@uvision-desktop:~$ ls Desktop Downloads Music Pictures Templates Documents examples.desktop OTA Public Videos uvision@uvision-desktop:~$ cd OTA/ uvision@uvision-desktop:~/OTA$ pwd /home/uvision/OTA uvision@uvision-desktop:~/OTA$ export WORKDIR=/home/uvision/OTA uvision@uvision-desktop:~/OTA$ sudo tar xpf \ > ./media/uvision/oo^C uvision@uvision-desktop:~/OTA$ df -h Filesystem Size Used Avail Use% Mounted on /dev/mmcblk0p1 28G 17G 9.7G 63% / none 3.8G 0 3.8G 0% /dev tmpfs 3.9G 52K 3.9G 1% /dev/shm tmpfs 3.9G 21M 3.9G 1% /run tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/sda1 58G 37G 21G 65% /media/1900-2257 tmpfs 786M 0 786M 0% /run/user/1000 uvision@uvision-desktop:~/OTA$ df -hsudo tar xpf \ > /media/^C uvision@uvision-desktop:~/OTA$ sudo mkdir OTSA_TX2 mkdir: cannot create directory β€˜OTA_TX2’: Permission denied uvision@uvision-desktop:~/OTA$ cd uvision@uvision-desktop:~$ sudo mkdoir OTA_TX2 uvision@uvision-desktop:~$ ls Desktop Downloads Music OTA_TX2 Public Videos Documents examples.desktop OTA Pictures Templates uvision@uvision-desktop:~$ cdsudo cp -r /media/1900-2257/otcd /media/1900-2257/ uvision@uvision-desktop:/media/1900-2257$ ls '????0304' 0601 0701 0705 0706 0725 0910 111 1125 2022022autoAcq '2022-03-04 11.zip' 2D_0629.rar 2D.rar 3D_0629.rar 3dCamera_SIT_20210531 3D.rar '515????' 8 amd64-release.txt autorun.ico autorun.inf boot BOOTEX.LOG calibration.json camera.mp4 cfg.ini Clonezilla-Live-Version Delivery_uAIVision.Device_vRelease8.0v1.1 Delivery_uAIVision.Device_vRelease8.0v1.2 dtbs.zip EFI GPL HWJ ldlinux.sys live log.zip MI OTA_TX2 prj.tar.gz Professional_Plus_2016_64Bit.zip RTSP syslinux syslinux.cfg 'System Volume Information' Tool uaiexperience uaiexperience.tar.gz uAIVision.DAQ uAIVision.DeviceLogs uAIVision.Device.XR.DSA 'uAI Vision Upgrade Tool R7.2.zip' utils uVisionAutoRun.zip uvisiondemo uVision.RTSPViewer_v1.11 uvision@uvision-desktop:/media/1900-2257$ sudo cp -r OtTA_TX2/ ./ cp: 'OTA_TX2/' and './OTA_TX2' are the same file uvision@uvision-desktop:/media/1900-2257$ lscd uvision@uvision-desktop:~$ ls Desktop Downloads Music OTA_TX2 Public Videos Documents examples.desktop OTA Pictures Templates uvision@uvision-desktop:~$ cdsudo rm -rf OTA_TX2/ uvision@uvision-desktop:~$ ls Desktop Downloads Music Pictures Templates Documents examples.desktop OTA Public Videos uvision@uvision-desktop:~$ lssudo rm -rf OTA_TX2/lscdsudo cp -r OTA_TX2/ .lssudo cp -r OTA_TX2/ .cd /media/1900-2257/ uvision@uvision-desktop:/media/1900-2257$ ls '????0304' 0601 0701 0705 0706 0725 0910 111 1125 2022022autoAcq '2022-03-04 11.zip' 2D_0629.rar 2D.rar 3D_0629.rar 3dCamera_SIT_20210531 3D.rar '515????' 8 amd64-release.txt autorun.ico autorun.inf boot BOOTEX.LOG calibration.json camera.mp4 cfg.ini Clonezilla-Live-Version Delivery_uAIVision.Device_vRelease8.0v1.1 Delivery_uAIVision.Device_vRelease8.0v1.2 dtbs.zip EFI GPL HWJ ldlinux.sys live log.zip MI OTA_TX2 prj.tar.gz Professional_Plus_2016_64Bit.zip RTSP syslinux syslinux.cfg 'System Volume Information' Tool uaiexperience uaiexperience.tar.gz uAIVision.DAQ uAIVision.DeviceLogs uAIVision.Device.XR.DSA 'uAI Vision Upgrade Tool R7.2.zip' utils uVisionAutoRun.zip uvisiondemo uVision.RTSPViewer_v1.11 uvision@uvision-desktop:/media/1900-2257$ sudo rm cp -r /OtOTA_TX2/ . cp: 'OTA_TX2/' and './OTA_TX2' are the same file uvision@uvision-desktop:/media/1900-2257$ sudo cp -r OTA_TX2/ ./uvision/ /uvision/h /uvision/o /uvision/m /uvision/e /uvision/[1@//uvision/ uvision@uvision-desktop:/media/1900-2257$ cd uvision@uvision-desktop:~$ ls Desktop Downloads Music OTA_TX2 Public Videos Documents examples.desktop OTA Pictures Templates uvision@uvision-desktop:~$ cd OTA_TX2/ uvision@uvision-desktop:~/OTA_TX2$ ls ota_payload_package.tar.gz ota_tools_R32.6.1_aarch64.tbz2 uvision@uvision-desktop:~/OTA_TX2$ cd cd ${WORKDIR} uvision@uvision-desktop:~/OTA$ sudo tar xpf \ > ../OTA_TX2/ota_tools_R32.6.1_aarch64.tbz2 uvision@uvision-desktop:~/OTA$ ls Linux_for_Tegra uvision@uvision-desktop:~/OTA$ cd Linux_for_Tegra/ uvision@uvision-desktop:~/OTA/Linux_for_Tegra$ ls bootloader jetson-tx2-R28_2-R32i-emmc.conf jetson-tx2-R28_3-R32i-emmc.conf jetson-tx2-R28_4-R32i-emmc.conf jetson-tx2-R32_1_2-R32i-emmc.conf jetson-tx2-R32A-R32i-emmc.conf jetson-tx2-R32i-sd.conf jetson-xavier-R32_1_2-R32i-emmc.conf jetson-xavier-R32A-R32i-emmc.conf p2597-0000+p3310-1000-R28_2-R32i-emmc.conf p2597-0000+p3310-1000-R28_3-R32i-emmc.conf p2597-0000+p3310-1000-R28_4-R32i-emmc.conf p2597-0000+p3310-1000-R32_1_2-R32i-emmc.conf p2597-0000+p3310-1000-R32A-R32i-emmc.conf p2597-0000+p3310-1000-R32i-sd.conf p2822-0000+p2888-0004-R32_1_2-R32i-emmc.conf p2822-0000+p2888-0004-R32A-R32i-emmc.conf tools uvision@uvision-desktop:~/OTA/Linux_for_Tegra$ cd / uvision@uvision-desktop:/$ ls bin dev home lost+found mnt proc root sbin srv tmp var boot etc lib media opt README.txt run snap sys usr uvision@uvision-desktop:/$ sudo mkdir ota uvision@uvision-desktop:/$ ls bin dev home lost+found mnt ota README.txt run snap sys usr boot etc lib media opt proc root sbin srv tmp var uvision@uvision-desktop:/$ suddo o cp /home/uvision/OTA_TX2/ota_payload_package.tar. .gz /ota/ uvision@uvision-desktop:/$ cd /o opt/ ota/ uvision@uvision-desktop:/$ cd /oota/ uvision@uvision-desktop:/ota$ ls ota_payload_package.tar.gz uvision@uvision-desktop:/ota$ cd ${WORKDIR}/Linux_for_Tegra/tools/ota_tools/versi ion_upgrade uvision@uvision-desktop:~/OTA/Linux_for_Tegra/tools/ota_tools/version_upgrade$ su udo ./nv_ota_start.sh /dev/mmcblk0 /ota/ota_payload_package.tar.gz Command: ./nv_ota_start.sh /dev/mmcblk0 /ota/ota_payload_package.tar.gz init_ota_log /ota_log Creating log dir at /ota_log Create log file at /ota_log/ota_20220728-111153.log OTA_LOG_FILE=/ota_log/ota_20220728-111153.log Extract /ota/ota_payload_package.tar.gz update_nv_boot_control_in_rootfs /ota_work 3310-B01---1--jetson-tx2-devkit- check_prerequisites get_chip_id chip_id Skip checking root device for non-T194 devices nv_ota_update_without_layout_change.sh /ota_work/ota_package.tar.gz Command: nv_ota_update_without_layout_change.sh /ota_work/ota_package.tar.gz decompress_ota_package /ota_work/ota_package.tar.gz /ota_work decompress_ota_package: start at 2022εΉ΄ 07月 28ζ—₯ ζ˜ŸζœŸε›› 11:12:29 CST Sha1 checksum for /ota_work/ota_package.tar (8de7540a875803f8ea7495cf555f5f893f299c59) matches decompress_ota_package: end at 2022εΉ΄ 07月 28ζ—₯ ζ˜ŸζœŸε›› 11:13:48 CST check_target_board /ota_work TARGET_BOARD get_chip_id CHIP_ID update_utilities_for_BUP_update /ota_work enable_a_b_redundancy Nvidia A/B-Redundancy Update tool Version 2.1 enabling A/B redundancy A/B Redundancy has been enabled. get_rootfs_a_b_enabled ROOTFS_AB_ENABLED UNIFIED_AB_ENABLED ROOTFS_AB_ENABLED=0 UNIFIED_AB_ENABLED=0 check_bsp_version /ota_work BASE_VERSION get_update_control /ota_work UPDATE_BOOTLOADER UPDATE_ROOTFS UPDATE_BOOTLOADER=1, UPDATE_ROOTFS=1 update_bootloader /ota_work 0 0x18 get_update_slot bootloader 0 update_slot update_slot=B update_bootloader_with_UE /ota_work 0x18 Nvidia A/B-Redundancy Update tool Version 2.1 verifying update Verify bootloader update begins. The rotate count has been restored. The current slot 0 is marked as boot successful SM: S1 The priority of current slot 0 has been restored. Verify rootfs update begins. RootFS A/B is not enabled, verification finishes. Nvidia A/B-Redundancy Update tool Version 2.1 Got payload file: /ota_work/bl_update_payload current slot 0 SM: S11 Set slot 1 as unbootable and start updating. Start running: /usr/sbin/nv_bootloader_payload_updater --no-dependent-partition /ota_work/bl_update_payload Got update payload: /ota_work/bl_update_payload Tegra User Block Device: /dev/disk/by-partlabel Tegra Boot Block Device: /dev/mmcblk0boot0 HEADER: MAGIC NVIDIA__BLOB__V2 HEX_VALUE 16909857 BLOB_SIZE 6194258 HEADER_SIZE 48 NUMBER_OF_ELEMENTS 18 HEADER_TYPE 0 UNCOMP_SIZE 6194258 MB1_RATCHET_LV 0 MTS_RATCHET_LV 0 ROLLBACK_FUSE_LV 0 Device TN Spec: 3310-D00-1000-E.0-1-0-jetson-tx2-mmcblk0p1 Device Compatible Spec: 3310-B01---1--jetson-tx2-devkit- Device TN Spec: 3310-D00-1000-E.0-1-0-jetson-tx2-mmcblk0p1 Device Compatible Spec: 3310-B01---1--jetson-tx2-devkit- Device is fused board. ENTRY_TABLE: PART POS LEN VER TNSPEC TYPE UPDATABLE bpmp-fw 2208 534816 12897 1 1 sce-fw 537024 126032 12897 1 1 cpu-bootloader 663056 309200 12897 1 1 mb2 972256 122784 12897 0 1 spe-fw 1095040 95984 12897 0 1 adsp-fw 1191024 77616 12897 1 1 secure-os 1268640 403264 12897 1 1 mb1 1671904 99856 12897 2 1 mts-bootpack 1771760 2298464 12897 1 1 mts-preboot 4070224 58384 12897 0 1 sc7 4128608 23632 12897 1 1 bpmp-fw-dtb 4152240 605120 12897 3310-B01---1-0-jetson-tx2-devkit-mmcblk0p1 1 1 bootloader-dtb 4757360 375968 12897 3310-B01---1-0-jetson-tx2-devkit-mmcblk0p1 1 1 VER 5133328 98 12897 3310-B01---1-0-jetson-tx2-devkit-mmcblk0p1 0 1 BCT 5133426 3584 12897 3310-B01---1-0-jetson-tx2-devkit-mmcblk0p1 2 1 MB1_BCT 5137010 50096 12897 3310-B01---1-0-jetson-tx2-devkit-mmcblk0p1 0 1 kernel 5187106 631184 12897 1 1 kernel-dtb 5818290 375968 12897 3310-B01---1-0-jetson-tx2-devkit-mmcblk0p1 1 1 Saving Entry table to /opt/ota_package/entry_table Writing 534816 bytes to /dev/disk/by-partlabel/bpmp-fw_b for bpmp-fw Writing 126032 bytes to /dev/disk/by-partlabel/sce-fw_b for sce-fw Writing 309200 bytes to /dev/disk/by-partlabel/cpu-bootloader_b for cpu-bootloader mb2 write: slot = 1 offset = 1276928 bytes = 122784 spe-fw write: slot = 1 offset = 883712 bytes = 95984 Writing 77616 bytes to /dev/disk/by-partlabel/adsp-fw_b for adsp-fw Writing 403264 bytes to /dev/disk/by-partlabel/secure-os_b for secure-os Writing 2298464 bytes to /dev/disk/by-partlabel/mts-bootpack_b for mts-bootpack mts-preboot write: slot = 1 offset = 1801216 bytes = 58384 Writing 23632 bytes to /dev/disk/by-partlabel/sc7_b for sc7 Writing 605120 bytes to /dev/disk/by-partlabel/bpmp-fw-dtb_b for bpmp-fw-dtb Writing 375968 bytes to /dev/disk/by-partlabel/bootloader-dtb_b for bootloader-dtb VER write: slot = 1 offset = 2071552 bytes = 98 MB1_BCT write: slot = 1 offset = 622592 bytes = 50096 Writing 631184 bytes to /dev/disk/by-partlabel/kernel_b for kernel Writing 375968 bytes to /dev/disk/by-partlabel/kernel-dtb_b for kernel-dtb mb1 write: slot = 0 offset = 32768 bytes = 99856 BCT slot = 0 write: offset = 3584 bytes = 3584 BCT slot = 0 write: offset = 0 bytes = 3584 BCT slot = 1 write: offset = 16384 bytes = 3584 mb1 write: slot = 1 offset = 294912 bytes = 99856 Update bup successfully SM: S12 Setting slot 1 as active boot slot Copy /opt/ota_package/entry_table into /ota_work/entry_table.ota_backup Bootloader on non-current slot(B) is updated update_rootfs /ota_work 0 update_rootfs_with_a_b_disabled /ota_work write_base_recovery /ota_work Verifying image /ota_work/recovery.img.R32_3_4 with sha1 chksum file /ota_work/recovery.img.R32_3_4.sha1sum Sha1 checksum for /ota_work/recovery.img.R32_3_4 (4f8aaed6b57a5a17653c13e588190a272b8bc856) matches Verifying image /ota_work/recovery.dtb.R32_3_4 with sha1 chksum file /ota_work/recovery.dtb.R32_3_4.sha1sum Sha1 checksum for /ota_work/recovery.dtb.R32_3_4 (10fe2884eacddba9e02623acc218523ee295da9e) matches Backed up kernel and kernel-dtb partition under /ota_work before writing them Writing base recovery image into /dev/disk/by-partlabel/recovery Read back base recovery image into /ota_work/image.tmp and verify it Reading 47647120 bytes from /dev/disk/by-partlabel/recovery: 1KB block=46530 remainder=400 offset=47646720 Verifying image /ota_work/image.tmp with sha1 chksum file /ota_work/recovery.img.R32_3_4.sha1sum Sha1 checksum for /ota_work/image.tmp (4f8aaed6b57a5a17653c13e588190a272b8bc856) matches Writing base recovery dtb into /dev/disk/by-partlabel/recovery-dtb Read back base recovery dtb into /ota_work/image.tmp and verify it Reading 343696 bytes from /dev/disk/by-partlabel/recovery-dtb: 1KB block=335 remainder=656 offset=343040 Verifying image /ota_work/image.tmp with sha1 chksum file /ota_work/recovery.dtb.R32_3_4.sha1sum Sha1 checksum for /ota_work/image.tmp (10fe2884eacddba9e02623acc218523ee295da9e) matches write_kernel_bootctrl /ota_work images-R32-ToT 512+0 records in 512+0 records out 262144 bytes (262 kB, 256 KiB) copied, 0.018846 s, 13.9 MB/s Backed up kernel-bootctrl partition under /ota_work before writing them Writing bootctrl update file into /dev/disk/by-partlabel/kernel-bootctrl Read back bootctrl update file into /ota_work/image.tmp and verify it Reading 20 bytes from /dev/disk/by-partlabel/kernel-bootctrl: 1KB block=0 remainder=20 offset=0 backup_extlinux_conf /ota_work Backing up /boot/extlinux/extlinux.conf Rootfs is to be updated in recovery kernel once device is rebooted. uvision@uvision-desktop:~/OTA/Linux_for_Tegra/tools/ota_tools/version_upgrade$ [ 4201.546188] FAT-fs (sda1): unable to read boot sector to mark fs as dirty