[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.201-tegra (buildbrain@mobile-u64-5497-d7000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Fri Jul 9 08:56:29 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 3f800000 [ 0.000000] OF: fdt: - bfa00000 , 3fe00000 [ 0.000000] OF: fdt: - ffa00000 , 600000 [ 0.000000] Found tegra_fbmem: 003a0000@92ca9000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fb800000 [ 0.000000] On node 0 totalpages: 522752 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 522752 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304 [ 0.000000] pcpu-alloc: s57560 r8192 d32552 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514560 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=2048M@2048M section=256M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 core_edp_mv=1075 core_edp_ma=4000 gpt tegra_fbmem=0x3a0000@0x92ca9000 is_hdmi_initialised=1 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29452(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 1942552K/2091008K available (15294K kernel code, 2942K rwdata, 6664K rodata, 8576K init, 609K bss, 82920K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13f808 ( 2943 KB) [ 0.000000] .bss : 0xffffff800a13f808 - 0xffffff800a1d7cbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf02000000 ( 32 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001809] Console: colour dummy device 80x25 [ 0.001820] console [tty0] enabled [ 0.001826] bootconsole [uart8250] disabled [ 0.001843] kmemleak: Kernel memory leak detector disabled [ 0.001862] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001874] pid_max: default: 32768 minimum: 301 [ 0.002331] Security Framework initialized [ 0.002549] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.002555] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.003671] ftrace: allocating 47208 entries in 185 pages [ 0.172732] sched-energy: CPU device node has no sched-energy-costs [ 0.172764] ASID allocator initialised with 65536 entries [ 0.212339] tegra-id: chipid=22117. [ 0.212350] tegra-id: opt_subrevision=0. [ 0.212368] Tegra Speedo/IDDQ fuse revision 4 [ 0.212373] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.212377] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.212383] Tegra: CPU Speedo Value 2076, SoC Speedo Value 1964, GPU Speedo Value 2077 [ 0.212387] Tegra: CPU IDDQ Value 2272, SoC IDDQ Value 2584, GPU IDDQ Value 3000 [ 0.212406] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.212422] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/batuu/kernel-dts/tegra210-p3448-0003-p3542-0000.dts [ 0.212429] DTB Build time: Feb 19 2021 08:42:41 [ 0.261059] CPU1: Booted secondary processor [411fd071] [ 0.292976] CPU2: Booted secondary processor [411fd071] [ 0.324941] CPU3: Booted secondary processor [411fd071] [ 0.325038] Brought up 4 CPUs [ 0.325045] SMP: Total of 4 processors activated. [ 0.325052] CPU features: detected feature: 32-bit EL0 Support [ 0.325315] CPU: All CPU(s) started at EL2 [ 0.325333] alternatives: patching kernel code [ 0.332941] devtmpfs: initialized [ 0.373920] Initilizing CustomIPI irq domain [ 0.374308] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.374329] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.376080] pinctrl core: initialized pinctrl subsystem [ 0.376534] OS set in device tree is not L4T. [ 0.376922] regulator-dummy: no parameters [ 0.377227] Initializing plugin-manager [ 0.377366] Plugin module not found [ 0.377687] node /plugin-manager/fragment@1 match with board >=3448-0003-400 [ 0.378851] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.379064] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.379466] node /plugin-manager/fragement@9 match with board >=3448-0003-000 [ 0.380763] node /plugin-manager/fragment@12 match with board >=3448-0003-400 [ 0.381016] node /plugin-manager/fragement@13 match with board >=3448-0003-400 [ 0.384987] NET: Registered protocol family 16 [ 0.386392] pstore: using zlib compression [ 0.386429] console [pstore-1] enabled [ 0.386434] pstore: Registered ramoops as persistent store backend [ 0.386439] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.401076] cpuidle: using governor menu [ 0.404390] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.406359] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000) [ 0.406381] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.409543] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.412098] Serial: AMBA PL011 UART driver [ 0.412588] tegra_powergate_init: DONE [ 0.412604] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/batuu/kernel-dts/tegra210-p3448-0003-p3542-0000.dts [ 0.412609] DTB Build time: Feb 19 2021 08:42:41 [ 0.414672] Tegra reboot handler registered. [ 0.419227] iommu: Adding device tegra-carveouts to group 0 [ 0.419340] platform tegra-carveouts: domain=ffffffc078b66318 allocates as[0]=ffffffc07845c0a8 [ 0.419685] iommu: Adding device smmu_test to group 1 [ 0.419736] platform smmu_test: domain=ffffffc078b66558 allocates as[0]=ffffffc07845c110 [ 0.420545] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.420597] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.420664] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.420672] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.420708] mc-err: mcerr ops are set to t21x [ 0.428669] iommu: Adding device 70090000.xusb to group 2 [ 0.428966] iommu: Adding device 70006000.serial to group 3 [ 0.429055] platform 70006000.serial: domain=ffffffc0784c3558 allocates as[0]=ffffffc07845c178 [ 0.429487] iommu: Adding device 70006040.serial to group 4 [ 0.429745] iommu: Adding device 70006200.serial to group 5 [ 0.429964] iommu: Adding device sound to group 6 [ 0.430023] platform sound: domain=ffffffc0784c3a98 allocates as[0]=ffffffc07845c1e0 [ 0.430571] iommu: Adding device 7000d400.spi to group 7 [ 0.430823] iommu: Adding device 7000d600.spi to group 8 [ 0.431094] iommu: Adding device 70410000.spi to group 9 [ 0.431406] iommu: Adding device 50000000.host1x to group 10 [ 0.431685] iommu: Adding device 54080000.vi to group 11 [ 0.432084] iommu: Adding device 54600000.isp to group 12 [ 0.432349] iommu: Adding device 54680000.isp to group 13 [ 0.432656] iommu: Adding device tegradc.0 to group 14 [ 0.432706] platform tegradc.0: domain=ffffffc0785119d8 allocates as[0]=ffffffc07845c248 [ 0.436485] platform tegradc.0: IOVA linear map 0x0000000092ca9000(3a0000) [ 0.436740] iommu: Adding device 54340000.vic to group 15 [ 0.436936] iommu: Adding device 544c0000.nvenc to group 16 [ 0.437226] iommu: Adding device 54500000.tsec to group 17 [ 0.437420] iommu: Adding device 54100000.tsecb to group 18 [ 0.437621] iommu: Adding device 54480000.nvdec to group 19 [ 0.437809] iommu: Adding device 54380000.nvjpg to group 20 [ 0.438520] iommu: Adding device 546c0000.i2c to group 21 [ 0.438881] iommu: Adding device 57000000.gpu to group 22 [ 0.438930] platform 57000000.gpu: domain=ffffffc07851f858 allocates as[0]=ffffffc07845c2b0 [ 0.438965] platform 57000000.gpu: domain=ffffffc07851f858 allocates as[1]=ffffffc07845c318 [ 0.438997] platform 57000000.gpu: domain=ffffffc07851f858 allocates as[2]=ffffffc07845c380 [ 0.439036] platform 57000000.gpu: domain=ffffffc07851f858 allocates as[3]=ffffffc07845c3e8 [ 0.439908] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.439920] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.439934] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.439938] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.439942] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.493163] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.493171] tegra-pmc: Clear bootloader IO dpd settings [ 0.493192] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.493256] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.493566] iommu: Adding device 70012000.se to group 23 [ 0.494403] iommu: Adding device 7000c000.i2c to group 24 [ 0.494708] iommu: Adding device 7000c400.i2c to group 25 [ 0.495008] iommu: Adding device 7000c500.i2c to group 26 [ 0.495319] iommu: Adding device 7000c700.i2c to group 27 [ 0.495633] iommu: Adding device 7000d000.i2c to group 28 [ 0.495928] iommu: Adding device 7000d100.i2c to group 29 [ 0.496290] iommu: Adding device sdhci-tegra.0 to group 30 [ 0.496342] platform sdhci-tegra.0: domain=ffffffc0785a39d8 allocates as[0]=ffffffc07845c450 [ 0.497292] iommu: Adding device 700d0000.xudc to group 31 [ 0.501197] vdd-ac-bat: 5000 mV [ 0.501593] vdd-5v0-sys: 5000 mV [ 0.502668] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.502711] vdd-5v0-hdmi: 5000 mV [ 0.503228] vdd-1v8-sys: 1800 mV [ 0.503674] vdd-fan: supplied by vdd-5v0-sys [ 0.503708] vdd-fan: 5000 mV [ 0.504139] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.504172] vdd-usb-vbus: 5000 mV [ 0.504851] vdd-usb-vbus2: 5000 mV [ 0.534147] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.536785] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.537902] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.537923] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.537956] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.538349] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.546325] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.546678] SCSI subsystem initialized [ 0.546956] libata version 3.00 loaded. [ 0.547274] usbcore: registered new interface driver usbfs [ 0.547321] usbcore: registered new interface driver hub [ 0.547384] usbcore: registered new device driver usb [ 0.551252] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.556351] vdd-core: 600 <--> 1162 mV at 1075 mV [ 0.557327] random: fast init done [ 0.557456] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.560387] vdd-ddr-1v1: 1150 mV [ 0.564230] vdd-pre-reg-1v35: 1350 mV [ 0.568230] vdd-1v8: 1800 mV [ 0.572231] avdd-sys-1v2: 1200 mV [ 0.576229] vdd-pex-1v0: 1050 mV [ 0.576907] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.577456] max77620-ldo3: at 3100 mV [ 0.580241] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.580780] max77620-ldo5: at 3100 mV [ 0.581323] max77620-ldo6: at 2800 mV [ 0.584235] avdd-1v05-pll: 1050 mV [ 0.588229] avdd-io-hdmi-dp: 1050 mV [ 0.590908] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.591187] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.591460] max77620 4-003c: max77620 probe successful [ 0.594131] media: Linux media interface: v0.10 [ 0.594190] Linux video capture interface: v2.00 [ 0.595058] pps_core: LinuxPPS API ver. 1 registered [ 0.595064] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.595085] PTP clock support registered [ 0.598387] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.599223] Advanced Linux Sound Architecture Driver Initialized. [ 0.599875] Bluetooth: Core ver 2.22 [ 0.599923] NET: Registered protocol family 31 [ 0.599928] Bluetooth: HCI device and connection manager initialized [ 0.599941] Bluetooth: HCI socket layer initialized [ 0.599949] Bluetooth: L2CAP socket layer initialized [ 0.599973] Bluetooth: SCO socket layer initialized [ 0.601632] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.601649] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.601698] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.601713] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.605394] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.606646] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.606733] vdd-3v3-sys: 3300 mV [ 0.607006] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.608323] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.608802] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.608867] vdd-3v3-sd: 3300 mV [ 0.609976] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.610020] avdd-io-edp-1v05: 1050 mV [ 0.610447] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.610483] vdd-usb-hub-en: 5000 mV [ 0.611817] camchar: rtcpu character device driver loaded [ 0.612647] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.613994] clocksource: Switched to clocksource arch_sys_counter [ 0.654206] VFS: Disk quotas dquot_6.6.0 [ 0.654333] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.654798] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.655208] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.655218] nvmap_page_pool_init: Total RAM pages: 502022 [ 0.655222] nvmap_page_pool_init: nvmap page pool size: 62752 pages (245 MB) [ 0.655353] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.655609] misc nvmap: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.655772] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.665123] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.665616] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.666035] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.666334] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.666549] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.666841] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.666845] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.667296] NET: Registered protocol family 2 [ 0.668289] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.668399] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.668655] TCP: Hash tables configured (established 16384 bind 16384) [ 0.668802] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.668845] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.669195] NET: Registered protocol family 1 [ 0.669937] RPC: Registered named UNIX socket transport module. [ 0.669943] RPC: Registered udp transport module. [ 0.669947] RPC: Registered tcp transport module. [ 0.669951] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.669965] PCI: CLS 0 bytes, default 64 [ 0.670249] Trying to unpack rootfs image as initramfs... [ 0.973211] Freeing initrd memory: 6988K [ 0.983245] host1x 50000000.host1x: initialized [ 0.985055] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.988338] audit: initializing netlink subsys (disabled) [ 0.988404] audit: type=2000 audit(0.839:1): initialized [ 0.989169] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.999092] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.000562] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.001350] 9p: Installing v9fs 9p2000 file system support [ 1.004602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.004743] io scheduler noop registered [ 1.005031] io scheduler cfq registered (default) [ 1.007709] gic 702f9000.agic: GIC IRQ controller registered [ 1.010671] iommu: Adding device 702ef000.adsp to group 32 [ 1.019746] iommu: Adding device aconnect@702c0000:adsp_audio to group 33 [ 1.019907] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.020468] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x8a29c11 [ 1.020476] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.022156] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.022253] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.022352] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.022551] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.022638] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.022727] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.022819] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.022915] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.023002] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.023098] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.023700] tegra-xusb-padctl 7009f000.xusb_padctl: failed to setup XUSB ports: -517 [ 1.030095] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.031797] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.033664] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.033712] tegra-pcie 1003000.pcie: PHY get deferred: -517 [ 1.033718] tegra-pcie 1003000.pcie: failed to get PHYs: -517 [ 1.035257] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.035469] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000 [ 1.035715] Adding domain tsec-pd to PM domain host1x-pd [ 1.038820] tsec 54500000.tsec: initialized [ 1.040140] tsec 54100000.tsecb: initialized [ 1.040823] Adding domain nvdec-pd to PM domain host1x-pd [ 1.044554] nvdec 54480000.nvdec: initialized [ 1.045621] Adding domain vic03-pd to PM domain host1x-pd [ 1.045806] Adding domain msenc-pd to PM domain host1x-pd [ 1.045964] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.050554] falcon 54340000.vic: initialized [ 1.051838] falcon 544c0000.nvenc: initialized [ 1.053164] falcon 54380000.nvjpg: initialized [ 1.057487] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=95 [ 1.057539] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.057572] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.057765] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.057855] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.057859] display board info: id 0x0, fab 0x0 [ 1.057863] tegra_cec 70015000.tegra_cec: probed [ 1.057927] generic_infoframe_type: 0x87 [ 1.058270] tegradc tegradc.0: DT parsed successfully [ 1.058321] tegradc tegradc.0: Display dc.ffffff800ab80000 registered with id=0 [ 1.058847] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1280x720 (on 0x0mm) pclk=74175000 [ 1.062294] tegradc tegradc.0: probed [ 1.067014] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.073450] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.074380] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.074386] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.074743] kfuse 7000fc00.kfuse: initialized [ 1.076140] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.077162] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.078654] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.078670] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.079162] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.080761] vdd-gpu: applied init 1000000uV constraint [ 1.080771] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.081229] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.085579] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.085684] No Device Node present for smmu client: serial8250 !! [ 1.085696] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.085735] iommu: Adding device serial8250 to group 34 [ 1.088090] console [ttyS0] disabled [ 1.088162] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.088251] console [ttyS0] enabled [ 1.089185] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.089511] serial-tegra 70006200.serial: RX in PIO mode [ 1.089620] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.090318] Console: switching to colour frame buffer device 160x45 [ 1.090384] tegradc tegradc.0: fb registered [ 1.091074] [drm] Initialized [ 1.097962] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 1.098047] tegradc tegradc.0: hdmi: tmds rate:74175K prod-setting:prod_c_hdmi_54m_75m [ 1.098567] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 1.098580] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 1.103599] brd: module loaded [ 1.109027] loop: module loaded [ 1.109131] tegra_profiler: version: 1.143, samples/io: 48/28 [ 1.109259] tegra_profiler: auth: init [ 1.110767] THERMAL EST: found 2 subdevs [ 1.110777] THERMAL EST num_resources: 0 [ 1.110784] [THERMAL EST subdev 0] [ 1.110790] [THERMAL EST subdev 1] [ 1.111255] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.111258] THERMAL EST: thz register success. [ 1.111434] THERMAL EST: end of probe, return err: 0 [ 1.112620] sd: No Scsi addr parsed to reserve index [ 1.112662] hisi_sas: driver version v1.6 [ 1.117478] tegra-qspi 70410000.spi: Prod settings list not found [ 1.118785] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 1.118795] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 1.121880] libphy: Fixed MDIO Bus: probed [ 1.122874] tun: Universal TUN/TAP device driver, 1.6 [ 1.122880] tun: (C) 1999-2004 Max Krasnyansky [ 1.123844] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.123849] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.123897] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.123900] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.123946] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.123950] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.124002] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.124005] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.124925] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.124931] Extcon AUX1(HDMI) enable [ 1.125345] PPP generic driver version 2.4.2 [ 1.125569] PPP BSD Compression module registered [ 1.125575] PPP Deflate Compression module registered [ 1.125615] PPP MPPE Compression module registered [ 1.125621] NET: Registered protocol family 24 [ 1.125704] usbcore: registered new interface driver r8152 [ 1.125765] usbcore: registered new interface driver asix [ 1.125817] usbcore: registered new interface driver ax88179_178a [ 1.125861] usbcore: registered new interface driver cdc_ether [ 1.125898] usbcore: registered new interface driver net1080 [ 1.125934] usbcore: registered new interface driver cdc_subset [ 1.125971] usbcore: registered new interface driver zaurus [ 1.126082] usbcore: registered new interface driver cdc_ncm [ 1.126289] VFIO - User Level meta-driver version: 0.3 [ 1.127632] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.127655] ehci-pci: EHCI PCI platform driver [ 1.127700] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.127713] ohci-pci: OHCI PCI platform driver [ 1.127755] ohci-platform: OHCI generic platform driver [ 1.129477] usbcore: registered new interface driver uas [ 1.129534] usbcore: registered new interface driver usb-storage [ 1.129646] usbcore: registered new interface driver usbserial [ 1.133418] mousedev: PS/2 mouse device common for all mice [ 1.133497] usbcore: registered new interface driver xpad [ 1.163060] tegradc tegradc.0: nominal-pclk:74175824 parent:74175000 div:1.0 pclk:74175000 73434042~80851622 [ 1.257479] tegradc tegradc.0: blank - powerdown [ 1.261730] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.263873] rtc rtc1: alarm rtc device [ 1.263887] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.263903] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.264263] i2c /dev entries driver [ 1.265756] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.289043] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.289114] imx219 6-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.289182] imx219 6-0010: board setup failed [ 1.289233] imx219: probe of 6-0010 failed with error -121 [ 1.290052] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.291921] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.291926] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.292233] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.292245] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.292252] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.292394] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.292403] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.292409] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.292560] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.292568] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.292572] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.292751] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.293257] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.293303] tegra_aotag tegra-aotag: Invalid temp readout [ 1.293322] tegra_aotag tegra-aotag: Invalid temp readout [ 1.293338] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.293346] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.294101] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.294115] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.294261] tegra_aotag tegra-aotag: Invalid temp readout [ 1.294282] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.294618] parse_throttle_dt_data: Num cap clks = 6 [ 1.294622] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.294628] parse_throttle_dt_data: clk=gpu type=4 [ 1.294649] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.294667] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.294686] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.294689] parse_throttle_dt_data: clk=emc type=3 [ 1.294981] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.295074] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.295176] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.295717] FAN dev name: pwm-fan [ 1.295757] FAN:gpio request success. [ 1.295809] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.296037] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.296155] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.296162] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.296242] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.296246] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.296250] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.296255] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.296259] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.296263] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.296267] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.296270] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.296274] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.296278] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.298372] device-mapper: uevent: version 1.0.3 [ 1.298758] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.301396] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 1.301399] Extcon AUX1(HDMI) disable [ 1.301418] tegra210-cpufreq cpufreq: probe()...completed [ 1.302228] sdhci: Secure Digital Host Controller Interface driver [ 1.302230] sdhci: Copyright(c) Pierre Ossman [ 1.302231] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.302736] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 1.303121] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 1.303246] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 298 [ 1.307963] tegra-se 70012000.se: tegra_se_probe: complete [ 1.308472] hidraw: raw HID events driver (C) Jiri Kosina [ 1.309679] usbcore: registered new interface driver usbhid [ 1.309680] usbhid: USB HID core driver [ 1.310724] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.310899] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.312855] nvpmodel: initialized successfully [ 1.313914] usbcore: registered new interface driver snd-usb-audio [ 1.313995] No Device Node present for smmu client: snd-soc-dummy !! [ 1.314000] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.314018] iommu: Adding device snd-soc-dummy to group 35 [ 1.319863] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.324431] tegradc tegradc.0: unblank [ 1.338579] OPE platform probe [ 1.338664] OPE platform probe successful [ 1.338953] OPE platform probe [ 1.339035] OPE platform probe successful [ 1.339915] tegradc tegradc.0: nominal-pclk:74250000 parent:74250000 div:1.0 pclk:74250000 73507500~80932500 [ 1.340033] tegradc tegradc.0: hdmi: tmds rate:74250K prod-setting:prod_c_hdmi_54m_75m [ 1.341154] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.350207] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 1.363336] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.363463] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.363594] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.363722] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.363856] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.363984] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.364109] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.364237] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.364361] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.364486] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.375867] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.375870] Extcon AUX1(HDMI) enable [ 1.376659] u32 classifier [ 1.376660] Actions configured [ 1.376730] Initializing XFRM netlink socket [ 1.377429] NET: Registered protocol family 10 [ 1.378078] NET: Registered protocol family 17 [ 1.378090] NET: Registered protocol family 15 [ 1.378162] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.378204] Bluetooth: RFCOMM socket layer initialized [ 1.378213] Bluetooth: RFCOMM ver 1.11 [ 1.378217] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.378222] Bluetooth: HIDP socket layer initialized [ 1.378239] 9pnet: Installing 9P2000 support [ 1.378274] Key type dns_resolver registered [ 1.378709] Registered cp15_barrier emulation handler [ 1.378714] Registered setend emulation handler [ 1.379680] registered taskstats version 1 [ 1.380181] Adding domain ve2-pd to PM domain host1x-pd [ 1.380436] Adding domain ve-pd to PM domain host1x-pd [ 1.382560] isp 54600000.isp: initialized [ 1.383555] isp 54680000.isp: initialized [ 1.391444] tegradc tegradc.0: sync windows ret = 246 [ 1.393637] last reset is due to power on reset [ 1.393640] KERNEL: PMC reset status reg: 0x0 [ 1.393700] BL: PMC reset status reg: 0x0 [ 1.393702] BL: PMIC poweroff Event Recorder: 0x80 [ 1.394419] vdd-usb-vbus-en: supplied by vdd-5v0-sys [ 1.394453] vdd-usb-vbus-en: 5000 mV [ 1.395674] clk_cbus_recalc_rate: no gbus parent [ 1.395679] clk_cbus_round_rate: no gbus parent [ 1.395681] clk_cbus_round_rate: no gbus parent [ 1.395687] clk_cbus_recalc_rate: no gbus parent [ 1.395780] clk_cbus_recalc_rate: no gbus parent [ 1.395782] clk_cbus_round_rate: no gbus parent [ 1.395784] clk_cbus_round_rate: no gbus parent [ 1.395787] clk_cbus_recalc_rate: no gbus parent [ 1.396484] tegra_dvfs: GPU-cap: registered [ 1.396544] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.396546] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 1.396547] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled [ 1.397924] tegra_dvfs: vdd-gpu-vts: registered [ 1.398071] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x8a29c11 [ 1.398075] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.398776] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.398834] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.398892] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.399002] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.399057] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.399112] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.399166] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.399250] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.399331] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.399385] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.400693] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.403898] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.404018] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.404610] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.405407] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.405693] tegra-xusb 70090000.xusb: extcon 0: ffffffc0781ca400 id [ 1.407180] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.407483] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.407990] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.407995] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.408493] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.408761] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.409156] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.409335] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 1.409362] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.409374] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.410177] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.410202] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.410944] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.410949] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.410952] usb usb1: Product: xHCI Host Controller [ 1.410954] usb usb1: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 1.410957] usb usb1: SerialNumber: 70090000.xusb [ 1.411128] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.411289] hub 1-0:1.0: USB hub found [ 1.411314] hub 1-0:1.0: 5 ports detected [ 1.411824] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.413911] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.413919] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.413996] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.414053] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.414057] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.414059] usb usb2: Product: xHCI Host Controller [ 1.414061] usb usb2: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 1.414064] usb usb2: SerialNumber: 70090000.xusb [ 1.414376] hub 2-0:1.0: USB hub found [ 1.414396] hub 2-0:1.0: 4 ports detected [ 1.414881] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.414885] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.423736] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.423739] Extcon HDMI: HPD enabled [ 1.423756] tegradc tegradc.0: hdmi: plugged [ 1.455215] tegra_rtc 7000e000.rtc: setting system clock to 2023-01-17 07:55:51 UTC (1673942151) [ 1.456232] vi 54080000.vi: vi_probe: ++ [ 1.458984] vi 54080000.vi: initialized [ 1.460984] vi 54080000.vi: subdev nvcsi--1 bound [ 1.461854] Disable partitions left on by BL [ 1.461857] disb [ 1.461897] bwmgr: missing cdev-type property [ 1.462043] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.462050] DRAM derating cdev registered. [ 1.463033] ALSA device list: [ 1.463037] #0: tegra-hda at 0x70038000 irq 81 [ 1.463039] #1: tegra-snd-t210ref-mobile-rt565x [ 1.466097] Freeing unused kernel memory: 8576K [ 1.489645] Root device found: mmcblk0p1 [ 1.514574] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.514638] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 1.520075] usb usb2: usb_suspend_both: status 0 [ 1.558147] mmc0: hw tuning done ... [ 1.558198] mmc0: new ultra high speed SDR104 SDXC card at address 0001 [ 1.558555] mmcblk0: mmc0:0001 EC2QT 59.6 GiB [ 1.562442] mmcblk0: p1 [ 1.694707] Found dev node: /dev/mmcblk0p1 [ 1.738014] usb 1-2: new low-speed USB device number 2 using tegra-xusb [ 1.766940] usb 1-2: New USB device found, idVendor=093a, idProduct=2510 [ 1.766946] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.766950] usb 1-2: Product: USB Optical Mouse [ 1.766953] usb 1-2: Manufacturer: PixArt [ 1.770242] input: PixArt USB Optical Mouse as /devices/70090000.xusb/usb1/1-2/1-2:1.0/0003:093A:2510.0001/input/input2 [ 1.770520] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-70090000.xusb-2/input0 [ 1.836251] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.890004] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 1.910616] usb 1-3: New USB device found, idVendor=1a40, idProduct=0801 [ 1.910621] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.910624] usb 1-3: Product: USB 2.0 Hub [ 1.911400] hub 1-3:1.0: USB hub found [ 1.911463] hub 1-3:1.0: 4 ports detected [ 2.066009] tegra_cec 70015000.tegra_cec: physical address: 30:00. [ 2.198006] usb 1-3.1: new high-speed USB device number 4 using tegra-xusb [ 2.219253] usb 1-3.1: New USB device found, idVendor=03f0, idProduct=cf07 [ 2.219257] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.219261] usb 1-3.1: Product: HP Webcam HD 5210 [ 2.219263] usb 1-3.1: Manufacturer: HP [ 2.219266] usb 1-3.1: SerialNumber: 1109 [ 2.244072] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.334001] usb 1-3.2: new full-speed USB device number 5 using tegra-xusb [ 2.357802] usb 1-3.2: New USB device found, idVendor=046d, idProduct=c52b [ 2.357807] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.357810] usb 1-3.2: Product: USB Receiver [ 2.357813] usb 1-3.2: Manufacturer: Logitech [ 2.655783] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.657858] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.762345] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.762350] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.762353] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.762356] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.762360] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.762379] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.762437] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.762572] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.762670] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.762693] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.762723] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.762742] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.762874] pci 0000:01:00.0: supports D1 D2 [ 2.762877] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.774127] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.774149] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 2.774153] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.774158] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit] [ 2.774174] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit] [ 2.774189] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.774196] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.774199] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.774204] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] [ 2.774398] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.774401] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.774406] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.774475] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.774633] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.774648] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.788669] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.788731] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 48:b0:2d:2e:49:e9 from device tree [ 2.789126] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.789141] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 4.210008] tegra_cec 70015000.tegra_cec: timeout in tegra_cec_native_write_l:172. [ 4.217639] tegra_cec 70015000.tegra_cec: Sent res: -62. [ 4.217643] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 6.428891] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted [ 6.428894] EXT4-fs (mmcblk0p1): recovery complete [ 6.469788] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 6.471775] Rootfs mounted over mmcblk0p1 [ 6.490811] Switching from initrd to actual rootfs [ 6.702965] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.715728] cgroup: cgroup2: unknown option "nsdelegate" [ 6.736853] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 6.737609] systemd[1]: Detected architecture arm64. [ 6.763035] systemd[1]: Set hostname to . [ 6.876023] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 6.876031] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 7.023037] random: systemd: uninitialized urandom read (16 bytes read) [ 7.023241] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.023366] random: systemd: uninitialized urandom read (16 bytes read) [ 7.025061] systemd[1]: Created slice User and Session Slice. [ 7.025246] random: systemd: uninitialized urandom read (16 bytes read) [ 7.026629] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.026684] systemd[1]: Reached target User and Group Name Lookups. [ 7.027513] systemd[1]: Created slice System Slice. [ 7.079533] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 7.212364] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 7.223339] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 7.223362] cpu-throttle-alert cooling device registered. [ 7.223483] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 7.223498] gpu-throttle-alert cooling device registered. [ 7.223646] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 7.223658] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 7.223673] hot-surface-alert cooling device registered. [ 7.276710] systemd-journald[2019]: Received request to flush runtime journal from PID 1 [ 7.513196] Adding 4194300k swap on /swapfile. Priority:-1 extents:6 across:4530172k SS [ 7.888016] using random self ethernet address [ 7.894062] using random host ethernet address [ 8.178011] random: crng init done [ 8.181442] random: 7 urandom warning(s) missed due to ratelimiting [ 8.842109] Mass Storage Function, version: 2009/09/11 [ 8.842115] LUN: removable file: (no medium) [ 8.847730] using random self ethernet address [ 8.854263] using random host ethernet address [ 9.217733] rndis0: HOST MAC 8a:00:e7:27:5f:58 [ 9.217809] rndis0: MAC 8a:00:e7:27:5f:59 [ 9.222741] usb0: HOST MAC 8a:00:e7:27:5f:5a [ 9.222772] usb0: MAC 8a:00:e7:27:5f:5b [ 9.222792] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 9.223462] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 9.223480] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 9.223509] tegra-xudc-new 700d0000.xudc: entering ELPG [ 9.223721] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 9.223739] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 9.224248] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 9.224260] tegra-xudc-new 700d0000.xudc: entering ELPG [ 9.224618] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 9.228853] l4tbr0: port 1(rndis0) entered blocking state [ 9.228858] l4tbr0: port 1(rndis0) entered disabled state [ 9.229030] device rndis0 entered promiscuous mode [ 9.239208] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 9.244205] l4tbr0: port 2(usb0) entered blocking state [ 9.244210] l4tbr0: port 2(usb0) entered disabled state [ 9.244400] device usb0 entered promiscuous mode [ 9.261773] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 9.365504] uvcvideo: Found UVC 1.00 device HP Webcam HD 5210 (03f0:cf07) [ 9.400163] uvcvideo 1-3.1:1.0: Entity type for entity Extension 8 was not initialized! [ 9.416908] uvcvideo 1-3.1:1.0: Entity type for entity Extension 2 was not initialized! [ 9.416913] uvcvideo 1-3.1:1.0: Entity type for entity Extension 6 was not initialized! [ 9.416918] uvcvideo 1-3.1:1.0: Entity type for entity Extension 5 was not initialized! [ 9.416922] uvcvideo 1-3.1:1.0: Entity type for entity Processing 3 was not initialized! [ 9.416926] uvcvideo 1-3.1:1.0: Entity type for entity Camera 1 was not initialized! [ 9.417271] input: HP Webcam HD 5210 as /devices/70090000.xusb/usb1/1-3/1-3.1/1-3.1:1.0/input/input3 [ 9.448763] usbcore: registered new interface driver uvcvideo [ 9.448765] USB Video Class driver (1.1.1) [ 9.462082] logitech-djreceiver 0003:046D:C52B.0004: hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-70090000.xusb-3.2/input2 [ 10.048176] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.049193] eth0: 0xffffff800ac43000, 48:b0:2d:2e:49:e9, IRQ 405 [ 10.058944] input: Logitech K520 as /devices/70090000.xusb/usb1/1-3/1-3.2/1-3.2:1.2/0003:046D:C52B.0004/0003:046D:2011.0005/input/input4 [ 10.060468] logitech-hidpp-device 0003:046D:2011.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K520] on usb-70090000.xusb-3.2:2 [ 10.099951] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.555106] zram: Added device: zram0 [ 10.575103] zram: Added device: zram1 [ 10.581052] zram: Added device: zram2 [ 10.582448] zram: Added device: zram3 [ 10.626464] zram0: detected capacity change from 0 to 259026944 [ 10.692171] Adding 252952k swap on /dev/zram0. Priority:5 extents:1 across:252952k SS [ 10.695692] zram1: detected capacity change from 0 to 259026944 [ 10.724792] Adding 252952k swap on /dev/zram1. Priority:5 extents:1 across:252952k SS [ 10.757152] zram2: detected capacity change from 0 to 259026944 [ 10.772129] Adding 252952k swap on /dev/zram2. Priority:5 extents:1 across:252952k SS [ 10.780721] zram3: detected capacity change from 0 to 259026944 [ 10.810161] Adding 252952k swap on /dev/zram3. Priority:5 extents:1 across:252952k SS [ 11.974151] usb 1-3.1: usb_suspend_both: status 0 [ 12.270359] Bridge firewalling registered [ 12.352520] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 12.598383] tegradc tegradc.0: unblank [ 12.611204] Netfilter messages via NETLINK v0.30. [ 12.613819] ctnetlink v0.93: registering with nfnetlink. [ 12.721139] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 13.170052] r8168: eth0: link up [ 13.170091] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.367170] fuse init (API version 7.26) [ 18.321506] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.321516] Bluetooth: BNEP socket layer initialized [ 25.990607] usb 1-3.1: usb_suspend_both: status 0 [ 31.860648] vdd-fan: disabling [ 31.860689] vdd-usb-vbus: disabling [ 31.860720] vdd-usb-vbus2: disabling [ 31.860821] avdd-io-edp-1v05: disabling [ 31.860852] vdd-usb-hub-en: disabling [ 128.569668] tegradc tegradc.0: unblank [ 152.808763] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 152.808770] Extcon AUX1(HDMI) disable [ 152.828407] tegradc tegradc.0: blank - powerdown [ 152.828473] extcon-disp-state extcon:disp-state: cable 51 state 0 [ 152.828476] Extcon HDMI: HPD disabled [ 152.828509] tegradc tegradc.0: hdmi: unplugged [ 152.857986] tegradc tegradc.0: blank - powerdown [ 152.857997] tegradc tegradc.0: unblank [ 152.858021] tegradc tegradc.0: unblank [ 363.868390] tegradc tegradc.0: blank - powerdown [ 363.868404] tegradc tegradc.0: unblank [ 363.873286] tegradc tegradc.0: nominal-pclk:74250000 parent:74250000 div:1.0 pclk:74250000 73507500~80932500 [ 363.873378] tegradc tegradc.0: hdmi: tmds rate:74250K prod-setting:prod_c_hdmi_54m_75m [ 363.874425] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 363.912770] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 363.912774] Extcon AUX1(HDMI) enable [ 363.913027] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 363.913030] Extcon HDMI: HPD enabled [ 363.913049] tegradc tegradc.0: hdmi: plugged [ 363.950971] tegradc tegradc.0: unblank [ 529.690963] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 529.690966] Extcon AUX1(HDMI) disable [ 529.711443] tegradc tegradc.0: blank - powerdown [ 529.711518] extcon-disp-state extcon:disp-state: cable 51 state 0 [ 529.711521] Extcon HDMI: HPD disabled [ 529.711544] tegradc tegradc.0: hdmi: unplugged [ 529.720545] tegradc tegradc.0: blank - powerdown [ 529.720556] tegradc tegradc.0: unblank [ 529.720580] tegradc tegradc.0: unblank [ 629.137334] usb 1-3.1: usb_suspend_both: status 0 [ 713.985745] tegradc tegradc.0: blank - powerdown [ 713.985889] tegradc tegradc.0: unblank [ 714.003647] tegradc tegradc.0: nominal-pclk:74250000 parent:74250000 div:1.0 pclk:74250000 73507500~80932500 [ 714.003769] tegradc tegradc.0: hdmi: tmds rate:74250K prod-setting:prod_c_hdmi_54m_75m [ 714.004794] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 714.042625] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 714.042635] Extcon AUX1(HDMI) enable [ 714.043559] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 714.043578] Extcon HDMI: HPD enabled [ 714.043623] tegradc tegradc.0: hdmi: plugged [ 714.060191] tegradc tegradc.0: unblank [ 740.614388] tegradc tegradc.0: blank - powerdown [ 740.672245] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 740.672265] Extcon AUX1(HDMI) disable [ 740.692219] tegradc tegradc.0: unblank [ 740.696827] tegradc tegradc.0: nominal-pclk:74250000 parent:74250000 div:1.0 pclk:74250000 73507500~80932500 [ 740.696908] tegradc tegradc.0: hdmi: tmds rate:74250K prod-setting:prod_c_hdmi_54m_75m [ 740.697917] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 740.733309] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 740.733313] Extcon AUX1(HDMI) enable [ 740.733632] tegradc tegradc.0: unblank [ 832.217976] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 832.217980] Extcon AUX1(HDMI) disable [ 832.241910] tegradc tegradc.0: blank - powerdown [ 832.241983] extcon-disp-state extcon:disp-state: cable 51 state 0 [ 832.241986] Extcon HDMI: HPD disabled [ 832.242009] tegradc tegradc.0: hdmi: unplugged [ 832.263794] tegradc tegradc.0: blank - powerdown [ 832.263805] tegradc tegradc.0: unblank [ 832.263829] tegradc tegradc.0: unblank [ 840.077969] usb 1-3.1: usb_suspend_both: status 0