17:47:14 INFO: Device info before flashing: Jetson AGX Orin | 001/005 | 1-4 | Recovery
17:47:14 DEBUG: running command < true >
17:47:14 INFO: exec_command: true
17:47:14 INFO: command finished successfully
17:47:14 DEBUG: running command < /tmp/device_mode_host_setup.sh >
17:47:14 INFO: exec_command: /tmp/device_mode_host_setup.sh
17:47:14 INFO: Found route default wlp0s20f3, setting up device mode
17:47:14 INFO: [host] [sudo] password for mouyun:
17:47:14 INFO: net.ipv4.ip_forward = 1
17:47:14 INFO: Device mode on host successfully set with DNS 8.8.8.8!
17:47:14 INFO: command finished successfully
17:47:14 DEBUG: running command < true >
17:47:14 INFO: exec_command: true
17:47:14 INFO: command finished successfully
17:47:14 DEBUG: Flash Jetson Linux - flash: using adapter to install NV_L4T_FLASH_JETSON_LINUX_COMP@JETSON_AGX_ORIN_TARGETS to /home/mouyun/nvidia/nvidia_sdk/JetPack_5.1_Linux_JETSON_AGX_ORIN_TARGETS
17:47:14 INFO: Flash Jetson Linux - flash: [host] [ Disk Avail:53.83 GB ]
17:47:14 INFO: Flash Jetson Linux - flash: change working directory to /home/mouyun/nvidia/nvidia_sdk/JetPack_5.1_Linux_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra
17:47:14 INFO: Flash Jetson Linux - flash: [ Component Install Started ]
17:47:14 INFO: Flash Jetson Linux - flash: current working directory is /home/mouyun/nvidia/nvidia_sdk/JetPack_5.1_Linux_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra
17:47:14 INFO: Flash Jetson Linux - flash: **********************
17:47:14 INFO: Flash Jetson Linux - flash: exec_command: /tmp/tmp_NV_L4T_FLASH_JETSON_LINUX_COMP.sh
17:47:14 INFO: Flash Jetson Linux - flash: sudo ./nvsdkmanager_flash.sh
17:47:14 INFO: Flash Jetson Linux - flash: Defaulting to autoflash
17:47:14 INFO: Flash Jetson Linux - flash: *** Checking ONLINE mode ... OK.
17:47:14 INFO: Flash Jetson Linux - flash: *** Checking target board connection ... 1 connections found.
17:47:18 INFO: Flash Jetson Linux - flash: *** Reading ECID ... FUSELEVEL=fuselevel_production hwchipid=0x23 bootauth=NS
17:47:18 INFO: Flash Jetson Linux - flash: *** Reading EEPROM ... "/home/mouyun/nvidia/nvidia_sdk/JetPack_5.1_Linux_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/tegraflash.py" --chip 0x23 --applet "/home/mouyun/nvidia/nvidia_sdk/JetPack_5.1_Linux_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/mb1_t234_prod.bin" --cfg readinfo_t234_min_prod.xml --dev_params tegra234-br-bct-diag-boot.dts --device_config tegra234-mb1-bct-device-p3701-0000.dts --misc_config tegra234-mb1-bct-misc-p3701-0000.dts --bins "mb2_applet applet_t234.bin" --skipuid --cmd "dump eeprom cvm cvm.bin; reboot recovery"
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.0130 ] tegrarcm_v2 --chip 0x23 0 --ismb2applet
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.0141 ] File rcm_state open failed
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.1139 ] MB1: Nvheader already present is mb1_t234_prod_aligned.bin
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.1877 ] Header already present for mb1_t234_prod_aligned_sigheader.bin
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.1889 ] MB1: Nvheader already present is mb1_t234_prod_aligned.bin
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.1968 ] Header already present for mb1_t234_prod_aligned_sigheader.bin
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.1990 ] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.2067 ] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.2100 ] adding BCH for mb2_t234_aligned.bin
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.2166 ] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.2324 ] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.2332 ] adding BCH for mb2_t234_aligned.bin
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.2675 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.xml.bin
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.2685 ] WARNING: boot chain is not completed. set to 0
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.3384 ] Assuming zero filled SBK key
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.3839 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.xml.bin --updatesig images_list_signed.xml
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.3849 ] WARNING: boot chain is not completed. set to 0
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.3960 ] Assuming zero filled SBK key
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.4098 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesig bct_list_signed.xml
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.4109 ] Offset :4608 Len :3584
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.4158 ] Assuming zero filled SBK key
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.4281 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesha bct_list_signed.xml
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.4295 ] Offset :68 Len :8124
17:47:18 ERROR: Flash Jetson Linux - flash: [ 0.4346 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.4366 ] Added Platform Config 9 data with size :- 100
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.4493 ] tegrahost_v2 --chip 0x23 0 --magicid MBCT --appendsigheader mb1_cold_boot_bct_MB1_aligned.bct zerosbk
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.4505 ] adding BCH for mb1_cold_boot_bct_MB1_aligned.bct
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.4553 ] Assuming zero filled SBK key
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.4708 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_bct.cfg --misc tegra234-mb1-bct-misc-p3701-0000_cpp.dtb --device tegra234-mb1-bct-device-p3701-0000_cpp.dtb
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.4745 ] Added Platform Config 9 data with size :- 100
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.4850 ] tegrahost_v2 --chip 0x23 0 --magicid MBCT --appendsigheader mb1_bct_MB1_aligned.bct zerosbk
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.4859 ] adding BCH for mb1_bct_MB1_aligned.bct
17:47:18 INFO: Flash Jetson Linux - flash: [ 0.4907 ] Assuming zero filled SBK key
17:47:19 INFO: Flash Jetson Linux - flash: [ 0.5185 ] tegrarcm_v2 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt
17:47:19 INFO: Flash Jetson Linux - flash: [ 0.5197 ] BR_CID: 0x80012344705DD8146C000000070181C0
17:47:19 INFO: Flash Jetson Linux - flash: [ 0.9115 ] Sending bct_br
17:47:19 INFO: Flash Jetson Linux - flash: [ 1.1239 ] Sending mb1
17:47:19 INFO: Flash Jetson Linux - flash: [ 1.1329 ] Sending psc_bl1
17:47:19 INFO: Flash Jetson Linux - flash: [ 1.1510 ] Sending bct_mb1
17:47:19 INFO: Flash Jetson Linux - flash: [ 1.1684 ] tegrahost_v2 --chip 0x23 0 --magicid MB2A --appendsigheader applet_t234_aligned.bin zerosbk
17:47:19 INFO: Flash Jetson Linux - flash: [ 1.1713 ] adding BCH for applet_t234_aligned.bin
17:47:19 INFO: Flash Jetson Linux - flash: [ 1.1884 ] Assuming zero filled SBK key
17:47:19 INFO: Flash Jetson Linux - flash: [ 1.2096 ] tegrarcm_v2 --chip 0x23 0 --pollbl --download applet applet_t234_sigheader.bin.encrypt
17:47:19 INFO: Flash Jetson Linux - flash: [ 1.2108 ] BL: version 0.28.0.0-t234-54845784-ec016368 last_boot_error: 0
17:47:20 INFO: Flash Jetson Linux - flash: [ 1.5912 ] Sending applet
17:47:20 INFO: Flash Jetson Linux - flash: [ 2.0690 ] MB2 Applet version 01.00.0000
17:47:20 INFO: Flash Jetson Linux - flash: [ 2.2616 ] tegrarcm_v2 --chip 0x23 0 --ismb2applet
17:47:20 INFO: Flash Jetson Linux - flash: [ 2.2627 ] MB2 Applet version 01.00.0000
17:47:21 INFO: Flash Jetson Linux - flash: [ 2.4843 ] tegrarcm_v2 --chip 0x23 0 --oem platformdetails chip chip_info.bin
17:47:21 INFO: Flash Jetson Linux - flash: [ 2.9152 ] Chip minor revision: 1
17:47:21 INFO: Flash Jetson Linux - flash: [ 2.9261 ] tegrarcm_v2 --oem platformdetails eeprom cvm /home/mouyun/nvidia/nvidia_sdk/JetPack_5.1_Linux_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/cvm.bin --chip 0x23 0
17:47:21 INFO: Flash Jetson Linux - flash: [ 2.9314 ] MB2 Applet version 01.00.0000
17:47:21 INFO: Flash Jetson Linux - flash: [ 3.3330 ] Saved platform info in /home/mouyun/nvidia/nvidia_sdk/JetPack_5.1_Linux_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/cvm.bin
17:47:22 INFO: Flash Jetson Linux - flash: [ 3.5704 ] MB2 Applet version 01.00.0000
17:47:22 INFO: Flash Jetson Linux - flash: [ 3.9988 ] tegrarcm_v2 --chip 0x23 0 --reboot recovery
17:47:22 INFO: Flash Jetson Linux - flash: [ 4.0001 ] MB2 Applet version 01.00.0000
17:47:24 INFO: Flash Jetson Linux - flash: --- Reading board information succeeded.
17:47:24 INFO: Flash Jetson Linux - flash: Parsing module EEPROM:
17:47:24 INFO: Flash Jetson Linux - flash: --- Parsing board ID (3701) succeeded.
17:47:24 INFO: Flash Jetson Linux - flash: --- Parsing board version (500) succeeded.
17:47:24 INFO: Flash Jetson Linux - flash: --- Parsing board SKU (0005) succeeded.
17:47:24 INFO: Flash Jetson Linux - flash: --- Parsing board REV (M.0) succeeded.
17:47:24 ERROR: Flash Jetson Linux - flash: Error: Target board not found.
17:47:24 INFO: Flash Jetson Linux - flash: [ Component Install Finished with Error ]
17:47:24 INFO: Flash Jetson Linux - flash: [host] [ 4.59 MB released. Disk Avail: 53.83 GB ]
17:47:24 INFO: Flash Jetson Linux - flash: [ NV_L4T_FLASH_JETSON_LINUX_COMP Install took 10s ]
17:47:24 ERROR: Flash Jetson Linux - flash: command terminated with error
17:47:24 SUMMARY: Flash Jetson Linux - flash: First Error: Installation failed.