Terminal ready
[0000.221] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c368a720)
[0000.229] I> Boot-device: eMMC
[0000.236] I> sdmmc bdev is already initialized
[0000.241] I> pmic: reset reason (nverc)	: 0x50
[0000.274] I> Found 19 partitions in SDMMC_BOOT (instance 3)
[0000.294] I> Found 33 partitions in SDMMC_USER (instance 3)
[0000.300] W> No valid slot number is found in scratch register
[0000.306] W> Return default slot: _a
[0000.309] I> A/B: bin_type (16) slot 0
[0000.313] I> Loading partition bpmp-fw at 0xd7800000
[0000.317] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.323] I> Addr: 0xd7800000, start-block: 29417480, num_blocks: 1
[0000.348] I> Binary(16) of size 534416 is loaded @ 0xd7800000
[0000.353] W> No valid slot number is found in scratch register
[0000.359] W> Return default slot: _a
[0000.362] I> A/B: bin_type (17) slot 0
[0000.366] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.371] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.377] I> Addr: 0xd79f0000, start-block: 29419896, num_blocks: 1
[0000.396] I> Binary(17) of size 113200 is loaded @ 0xd79e4400
[0000.424] I> Loading SCE-FW ...
[0000.427] W> No valid slot number is found in scratch register
[0000.432] W> Return default slot: _a
[0000.436] I> A/B: bin_type (12) slot 0
[0000.439] I> Loading partition sce-fw at 0xd7300000
[0000.444] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.450] I> Addr: 0xd7300000, start-block: 29423992, num_blocks: 1
[0000.469] I> Binary(12) of size 125632 is loaded @ 0xd7300000
[0000.474] I> Init SCE
[0000.477] I> Loading APE-FW ...
[0000.480] W> No valid slot number is found in scratch register
[0000.485] W> Return default slot: _a
[0000.489] I> A/B: bin_type (11) slot 0
[0000.492] I> Loading partition adsp-fw at 0xd7400000
[0000.497] I> Reading two headers - addr:0xd7400000 blocks:1
[0000.503] I> Addr: 0xd7400000, start-block: 29401096, num_blocks: 1
[0000.522] I> Binary(11) of size 77216 is loaded @ 0xd7400000
[0000.528] I> Copy BTCM section
[0000.530] W> No valid slot number is found in scratch register
[0000.536] W> Return default slot: _a
[0000.540] I> A/B: bin_type (13) slot 0
[0000.543] I> Loading partition cpu-bootloader at 0x96000000
[0000.549] I> Reading two headers - addr:0x96000000 blocks:1
[0000.554] I> Addr: 0x96000000, start-block: 29380616, num_blocks: 1
[0000.575] I> Binary(13) of size 308800 is loaded @ 0x96000000
[0000.581] W> No valid slot number is found in scratch register
[0000.586] W> Return default slot: _a
[0000.590] I> A/B: bin_type (20) slot 0
[0000.593] I> Loading partition bootloader-dtb at 0x85205400
[0000.599] I> Reading two headers - addr:0x85205400 blocks:1
[0000.604] I> Addr: 0x85205400, start-block: 29382664, num_blocks: 1
[0000.624] I> Binary(20) of size 185264 is loaded @ 0x85205400
[0000.630] W> No valid slot number is found in scratch register
[0000.635] W> Return default slot: _a
[0000.639] I> A/B: bin_type (14) slot 0
[0000.642] I> Loading partition secure-os at 0x85305600
[0000.647] I> Reading two headers - addr:0x85305600 blocks:1
[0000.653] I> Addr: 0x85305600, start-block: 29384712, num_blocks: 1
[0000.675] I> Binary(14) of size 402864 is loaded @ 0x85305600
[0000.682] I> TOS boot-params @ 0x85000000
[0000.686] I> TOS params prepared
[0000.690] I> Loading EKS ...
[0000.692] I> A/B: bin_type (15) slot 0
[0000.696] I> Loading partition eks at 0x85905800
[0000.700] I> Reading two headers - addr:0x85905800 blocks:1
[0000.706] I> Addr: 0x85905800, start-block: 29397000, num_blocks: 1
[0000.725] I> Binary(15) of size 1040 is loaded @ 0x85905800
[0000.730] I> EKB detected (length: 0x400) @ 0x85905800
[0000.735] I> Copied encrypted keys
[0000.739] I> boot profiler @ 0x175844000
[0000.743] I> boot profiler for TOS @ 0x175844000
[0000.747] I> Unhalting SCE
[0000.750] I> Primary Memory Start:80000000 Size:70000000
[0000.755] I> Extended Memory Start:f0110000 Size:856f0000
[0000.762] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.3(release):b5eeb33f7
NOTICE:  BL31: Built : 12:15:17, Jul 26 2021
ipc-unittest-main: 1519: Welcome to IPC unittest!!!
ipc-unittest-main: 1531: waiting forever
ipc-unittest-srv: 329: Init unittest services!!!
hwkey-agent: 41: hwkey-agent is running!!
hwkey-agent: 315: key_mgnt_processing .......
hwkey-agent: 223: Setting EKB key 0 to slot 14
hwkey-agent: 178: Init hweky-agent services!!
luks-srv: 40: luks-srv is running!!
luks-srv: 157: Init luks-srv IPC services!!
platform_bootstrap_epilog: trusty bootstrap complete
[0000.936] I> Welcome to Cboot
[0000.939] I> Cboot Version: t186-00029e71
[0000.943] I> CPU-BL Params @ 0x175800000
[0000.946] I>  0) Base:0x00000000 Size:0x00000000
[0000.951] I>  1) Base:0x177f00000 Size:0x00100000
[0000.955] I>  2) Base:0x177e00000 Size:0x00100000
[0000.960] I>  3) Base:0x177d00000 Size:0x00100000
[0000.964] I>  4) Base:0x177c00000 Size:0x00100000
[0000.969] I>  5) Base:0x177b00000 Size:0x00100000
[0000.973] I>  6) Base:0x177800000 Size:0x00200000
[0000.978] I>  7) Base:0x177400000 Size:0x00400000
[0000.982] I>  8) Base:0x177a00000 Size:0x00100000
[0000.987] I>  9) Base:0x177300000 Size:0x00100000
[0000.991] I> 10) Base:0x176800000 Size:0x00800000
[0000.996] I> 11) Base:0x30000000 Size:0x00040000
[0001.000] I> 12) Base:0xf0000000 Size:0x00100000
[0001.005] I> 13) Base:0x30040000 Size:0x00001000
[0001.009] I> 14) Base:0x30048000 Size:0x00001000
[0001.014] I> 15) Base:0x30049000 Size:0x00001000
[0001.018] I> 16) Base:0x3004a000 Size:0x00001000
[0001.022] I> 17) Base:0x3004b000 Size:0x00001000
[0001.027] I> 18) Base:0x3004c000 Size:0x00001000
[0001.031] I> 19) Base:0x3004d000 Size:0x00001000
[0001.036] I> 20) Base:0x3004e000 Size:0x00001000
[0001.040] I> 21) Base:0x3004f000 Size:0x00001000
[0001.045] I> 22) Base:0x00000000 Size:0x00000000
[0001.049] I> 23) Base:0xf0100000 Size:0x00010000
[0001.054] I> 24) Base:0x00000000 Size:0x00000000
[0001.058] I> 25) Base:0x00000000 Size:0x00000000
[0001.062] I> 26) Base:0x00000000 Size:0x00000000
[0001.067] I> 27) Base:0x00000000 Size:0x00000000
[0001.071] I> 28) Base:0x84400000 Size:0x00400000
[0001.076] I> 29) Base:0x30000000 Size:0x00010000
[0001.080] I> 30) Base:0x178000000 Size:0x08000000
[0001.085] I> 31) Base:0x00000000 Size:0x00000000
[0001.089] I> 32) Base:0x176000000 Size:0x00600000
[0001.094] I> 33) Base:0x80000000 Size:0x70000000
[0001.098] I> 34) Base:0xf0110000 Size:0x856f0000
[0001.102] I> 35) Base:0x00000000 Size:0x00000000
[0001.107] I> 36) Base:0x00000000 Size:0x00000000
[0001.111] I> 37) Base:0x1772e0000 Size:0x00020000
[0001.116] I> 38) Base:0x84000000 Size:0x00400000
[0001.120] I> 39) Base:0x96000000 Size:0x02000000
[0001.125] I> 40) Base:0x85000000 Size:0x01200000
[0001.129] I> 41) Base:0x175800000 Size:0x00500000
[0001.134] I> 42) Base:0x00000000 Size:0x00000000
[0001.138] I> 43) Base:0x00000000 Size:0x00000000
[0001.142] GIC-SPI Target CPU: 4
[0001.146] Interrupts Init done
[0001.149] calling constructors
[0001.152] initializing heap
[0001.155] initializing threads
[0001.158] initializing timers
[0001.161] creating bootstrap completion thread
[0001.166] top of bootstrap2()
[0001.169] CPU: ARM Cortex A57
[0001.172] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.178] initializing platform
[0001.181] I> Bl_dtb @0x85205400
[0001.184] I> gpio framework initialized
[0001.189] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver
[0001.198] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver
[0001.205] I> GPIO framework and drivers are initialized.
[0001.210] I> Boot-device: eMMC
[0001.218] I> sdmmc bdev is already initialized
[0001.248] I> Found 19 partitions in SDMMC_BOOT (instance 3)
[0001.266] I> Found 33 partitions in SDMMC_USER (instance 3)
[0001.271] W> opt-in fuse is not set, skip fuse_burning
[0001.276] I> Reserved memory at 0xfbe00000 for U-Boot relocation
[0001.282] W> No valid slot number is found in scratch register
[0001.288] W> Return default slot: _a
[0001.297] I> A/B: bin_type (21) slot 0
[0001.301] I> Loading kernel-dtb from partition
[0001.305] I> Loading partition kernel-dtb at 0x80000000 from device(0x1)
[0001.322] I> Kernel_dtb @0x80000000
[0001.326] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.333] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539
[0001.343] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539
[0001.351] W> tegrabl_tca9539_init: failed to fetch phandle from dt
[0001.357] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8
[0001.365] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539
[0001.375] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539
[0001.383] W> tegrabl_tca9539_init: failed to fetch phandle from dt
[0001.390] I> fixed regulator driver initialized
[0001.412] I> register 'maxim' power off handle
[0001.417] I> virtual i2c enabled
[0001.421] I> registered 'maxim,max77620' pmic
[0001.425] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.435] E> failed to read label property for node 150404: 13
[0001.442] E> failed to read reg property for node 150500: 13
[0001.449] E> failed to read reg property for node 150552: 13
[0001.455] E> failed to read label property for node 150636: 13
[0001.462] E> failed to read reg property for node 150704: 13
[0001.469] E> failed to read reg property for node 150776: 13
[0001.476] I> Find /i2c@c250000's alias i2c7
[0001.480] I> Reading eeprom i2c=7 address=0x50
[0001.510] I> Device at /i2c@c250000:0x50
[0001.513] I> Reading eeprom i2c=7 address=0x57
[0001.518] E> I2C: slave not found in slaves.
[0001.522] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true.
[0001.530] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.535] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7.
[0001.545] E> eeprom: Failed to read I2C slave device
[0001.550] I> Eeprom read failed 0x3526070d
[0001.554] I> Find /i2c@3160000's alias i2c0
[0001.558] I> Reading eeprom i2c=0 address=0x50
[0001.563] E> I2C: slave not found in slaves.
[0001.567] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true.
[0001.575] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.581] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0.
[0001.590] E> eeprom: Failed to read I2C slave device
[0001.595] I> Eeprom read failed 0x3526070d
[0001.600] I> Find /i2c@3180000's alias i2c2
[0001.604] I> Reading eeprom i2c=2 address=0x54
[0001.608] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.613] C> GPIO driver for chip_id 0x2 could not be found
[0001.618] E> cam_eeprom_read: Can't get gpio driver
[0001.623] I> Eeprom read failed 0x4d4d000d
[0001.627] I> Reading eeprom i2c=2 address=0x57
[0001.631] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.636] C> GPIO driver for chip_id 0x2 could not be found
[0001.641] E> cam_eeprom_read: Can't get gpio driver
[0001.646] I> Eeprom read failed 0x4d4d000d
[0001.650] I> create_pm_ids: id: 3636-0001-300-H, len: 15
[0001.655] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.670] E> cannot find any other nvdisp nodes
[0001.674] E> no valid display unit config found in dtb
[0001.680] W> display init failed
[0001.683] initializing target
[0001.686] calling apps_init()
[0001.689] starting app kernel_boot_app
[0001.712] I> found decompressor handler: lz4-legacy
[0001.717] I> decompressing BMP blob ...
[0001.729] I> Kernel type = Normal
[0001.732] I> ########## Fixed storage boot ##########
[0001.737] I> Loading kernel-bootctrl from partition
[0001.742] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1)
[0001.756] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid
[0001.763] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data
[0001.770] W> No valid slot number is found in scratch register
[0001.775] W> Return default slot: _a
[0001.779] I> A/B: bin_type (24) slot 0
[0001.794] I> Boot image size read from image header: 99085
[0001.800] I> Boot image load address: 0x80400000
[0001.804] I> Loading kernel from partition
[0001.808] I> Loading partition kernel at 0x80400000 from device(0x1)
[0002.751] I> Validate kernel ...
[0002.754] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000
[0002.762] I> Decrypt the buffer ... [0002.765] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption.
[0002.774] I> done
[0002.776] I> Checking boot.img header magic ... [0002.780] I> [OK]
[0002.782] I> kernel-dtb is already loaded
[0002.786] I> Validate kernel-dtb ...
[0002.789] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000
[0002.796] I> Decrypt the buffer ... [0002.800] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption.
[0002.809] I> done
[0002.810] I> Kernel hdr @0x80400000
[0002.814] I> Kernel dtb @0x80000000
[0002.817] I> decompressor handler not found
[0002.821] I> Copying kernel image (626821 bytes) from 0x80400800 to 0x80600000 ... [0002.828] I> Done
[0002.830] I> Move ramdisk (len: 0) from 0x8049a000 to 0x947d0000
[0002.837] I> Updated bpmp info to DTB
[0002.842] I> Ramdisk: Base: 0x947d0000; Size: 0x0
[0002.847] I> Updated initrd info to DTB
[0002.850] W> WARN: Fail to override "console=none" in commandline
[0002.856] I> Active rootfs suffix: 
[0002.859] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params
[0002.867] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params
[0002.874] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params
[0002.881] I> disabled_core_mask: 0xffffff0c
[0002.885] W> No valid slot number is found in scratch register
[0002.891] W> Return default slot: _a
[0002.894] I> Active slot suffix: 
[0002.897] I> add_boot_slot_suffix: slot_suffix = 
[0002.902] I> Linux Cmdline: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4  video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 
[0002.937] I> Updated bootarg info to DTB
[0002.941] W> MAC addr invalid!
[0002.944] E> Failed to get WIFI MAC address
[0002.948] W> MAC addr invalid!
[0002.951] E> Failed to get Bluetooth MAC address
[0002.955] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:3b:62:04
[0002.961] E> Found no plugin manager ids in source DT
[0002.966] W> Add plugin manager ids from board info
[0002.971] W> "plugin-manager" doesn't exist, creating
[0002.976] W> "ids" doesn't exist, creating
[0002.980] W> "connection" doesn't exist, creating
[0002.984] W> "configs" doesn't exist, creating
[0002.989] I> create_pm_ids: id: 3636-0001-300-H, len: 15
[0002.994] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0003.005] I> Adding plugin-manager/ids/3636-0001-300=/i2c@c250000:module@0x50
[0003.012] W> "i2c@c250000" doesn't exist, creating
[0003.017] W> "module@0x50" doesn't exist, creating
[0003.022] I> Adding plugin-manager/ids/3636-0001-300-H
[0003.028] I> Adding plugin-manager/configs/3636-mem-type 00
[0003.034] I> Adding plugin-manager/configs/3636-power-config 00
[0003.040] I> Adding plugin-manager/configs/3636-misc-config 00
[0003.046] I> Adding plugin-manager/configs/3636-modem-config 00
[0003.052] I> Adding plugin-manager/configs/3636-touch-config 00
[0003.057] I> Adding plugin-manager/configs/3636-display-config 00
[0003.063] I> Adding plugin-manager/cvm
[0003.067] W> "chip-id" doesn't exist, creating
[0003.072] I> Adding plugin-manager/chip-id/A02P
[0003.076] W> "odm-data" doesn't exist, creating
[0003.081] I> Adding /chosen/plugin-manager/odm-data
[0003.089] I> added [base:0x80000000, size:0x70000000] to /memory
[0003.095] I> added [base:0xf0200000, size:0x85600000] to /memory
[0003.100] I> added [base:0x175e00000, size:0x200000] to /memory
[0003.106] I> added [base:0x176600000, size:0x200000] to /memory
[0003.112] I> added [base:0x177000000, size:0x200000] to /memory
[0003.118] I> Updated memory info to DTB
[0003.122] E> add_disp_param: failed to get display params for du=0
[0003.129] W> "reset" doesn't exist, creating
[0003.133] W> "pmc-reset-reason" doesn't exist, creating
[0003.138] W> "pmic-reset-reason" doesn't exist, creating
[0003.144] I> Adding ecid(00000001647e25c70000000015fc0400) to DT
[0003.150] I> disabled_core_mask: 0xffffff0c
[0003.159] I> Add serial number:1420921112484 as DT property
[0003.166] I> Plugin-manager override starting
[0003.171] I> node /plugin-manager/fragement@0 matches
[0003.178] I> node /plugin-manager/fragement@3 matches
[0003.191] I> Disable plugin-manager status in FDT
[0003.196] I> Plugin-manager override finished successfully
[0003.201] I> tegrabl_load_kernel_and_dtb: Done
[0003.206] E> tegrabl_display_clear: display is not initialized
[0003.211] W> Boot logo display failed...
[0003.215] I> Kernel EP: 0x80600000, DTB: 0x80000000


U-Boot 2020.04-g46e4604c78 (Jul 26 2021 - 12:10:58 -0700)

SoC: tegra186
Model: NVIDIA P3636-0001
Board: NVIDIA P3636-0001
DRAM:  3.8 GiB
MMC:   sdhci@3400000: 1, sdhci@3460000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   
Warning: ethernet@2490000 using MAC address from ROM
eth0: ethernet@2490000
Hit any key to stop autoboot:  0 
Card did not respond to voltage select!
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
783 bytes read in 24 ms (31.3 KiB/s)
1:	primary kernel
Retrieving file: /boot/initrd
7238344 bytes read in 190 ms (36.3 MiB/s)
Retrieving file: /boot/Image
34224136 bytes read in 821 ms (39.8 MiB/s)
append: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4  video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 
## Flattened Device Tree blob at 80000000
   Booting using the fdt blob at 0x80000000
ERROR: reserving fdt memory region failed (addr=0 size=0)
ERROR: reserving fdt memory region failed (addr=0 size=0)
ERROR: reserving fdt memory region failed (addr=0 size=0)
   Using Device Tree in place at 0000000080000000, end 0000000080032340
copying carveout for /host1x@13e00000/display-hub@15200000/display@15200000...
copying carveout for /host1x@13e00000/display-hub@15200000/display@15210000...
copying carveout for /host1x@13e00000/display-hub@15200000/display@15220000...

Starting kernel ...