[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3357) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Jun 25 21:22:12 PDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a069d000 [ 0.000000] Found lut_mem: 00002008@a0697000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2030589 [ 0.000000] DMA zone: 7152 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 457725 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1ffd04000 s61656 r8192 d32552 u102400 [ 0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1998861 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt tegra_fbmem=0x800000@0xa069d000 lut_mem=0x2008@0xa0697000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix=_b boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29176(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7182180K/8122356K available (15294K kernel code, 2934K rwdata, 6640K rodata, 8576K init, 609K bss, 186512K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a13d808 - 0xffffff800a1d5f7c ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000743] Console: colour dummy device 80x25 [ 0.000754] console [tty0] enabled [ 0.000762] bootconsole [tegra_comb_uart0] disabled [ 0.000775] kmemleak: Kernel memory leak detector disabled [ 0.000793] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000808] pid_max: default: 32768 minimum: 301 [ 0.001871] Security Framework initialized [ 0.002438] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002470] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004092] ftrace: allocating 47104 entries in 185 pages [ 0.391943] sched-energy: Sched-energy-costs installed from DT [ 0.391964] ASID allocator initialised with 65536 entries [ 0.429497] tegra-id: chipid=21917. [ 0.429509] tegra-id: opt_subrevision=1. [ 0.429536] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.429570] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.429580] DTB Build time: Jun 25 2020 21:27:47 [ 0.477645] CPU1: Booted secondary processor [4e0f0040] [ 0.509762] CPU2: Booted secondary processor [4e0f0040] [ 0.541830] CPU3: Booted secondary processor [4e0f0040] [ 0.574113] CPU4: Booted secondary processor [4e0f0040] [ 0.606163] CPU5: Booted secondary processor [4e0f0040] [ 0.606356] Brought up 6 CPUs [ 0.606366] SMP: Total of 6 processors activated. [ 0.606375] CPU features: detected feature: Privileged Access Never [ 0.606382] CPU features: detected feature: LSE atomic instructions [ 0.606388] CPU features: detected feature: User Access Override [ 0.606394] CPU features: detected feature: 32-bit EL0 Support [ 0.607852] CPU: All CPU(s) started at EL2 [ 0.607919] alternatives: patching kernel code [ 0.614389] devtmpfs: initialized [ 0.655485] Initilizing CustomIPI irq domain [ 0.655771] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.655788] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.667373] pinctrl core: initialized pinctrl subsystem [ 0.667613] OS set in device tree is not L4T. [ 0.667885] regulator-dummy: no parameters [ 0.668136] Initializing plugin-manager [ 0.668189] Plugin module not found [ 0.668231] Plugin-manager status disabled [ 0.669319] NET: Registered protocol family 16 [ 0.670611] pstore: using zlib compression [ 0.670635] console [pstore-1] enabled [ 0.670643] pstore: Registered ramoops as persistent store backend [ 0.670652] ramoops: attached 0x200000@0xf0600000, ecc: 0/0 [ 0.688969] cpuidle: using governor menu [ 0.689948] bpmp: waiting for handshake [ 0.689961] bpmp: handshake completed [ 0.689978] bpmp: synchronizing channels [ 0.689990] bpmp: channels synchronized [ 0.690000] bpmp: mail init ok [ 0.692813] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.693116] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.693123] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.693130] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.693157] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.693162] t19x-arm-smmu 12000000.iommu: nested translation [ 0.693170] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.693178] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.693184] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.693191] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.693198] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.696423] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000) [ 0.696468] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.699065] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.700048] tegra_aon_clk_init: ok [ 0.700061] Registering BPMP clocks... [ 0.700163] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.700741] Serial: AMBA PL011 UART driver [ 0.700898] tegra_powergate_init: DONE [ 0.701047] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.701061] DTB Build time: Jun 25 2020 21:27:47 [ 0.703685] Tegra reboot handler registered. [ 0.711829] iommu: Adding device 14160000.pcie to group 0 [ 0.712526] iommu: Adding device 141a0000.pcie to group 1 [ 0.714130] iommu: Adding device 2490000.ether_qos to group 2 [ 0.714609] iommu: Adding device 3100000.serial to group 3 [ 0.715102] iommu: Adding device 3110000.serial to group 4 [ 0.715478] iommu: Adding device 3140000.serial to group 5 [ 0.716042] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.716274] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.716300] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.716324] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.716334] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.716388] tegra-pmc: PMC Prod config success [ 0.716591] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.716604] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.716956] iommu: Adding device 3400000.sdhci to group 6 [ 0.717533] iommu: Adding device 3210000.spi to group 7 [ 0.717921] iommu: Adding device 3230000.spi to group 8 [ 0.718342] iommu: Adding device 3270000.spi to group 9 [ 0.719450] iommu: Adding device 3160000.i2c to group 10 [ 0.719853] iommu: Adding device c240000.i2c to group 11 [ 0.720271] iommu: Adding device 3180000.i2c to group 12 [ 0.720704] iommu: Adding device 3190000.i2c to group 13 [ 0.721255] iommu: Adding device 31b0000.i2c to group 14 [ 0.721677] iommu: Adding device 31c0000.i2c to group 15 [ 0.722073] iommu: Adding device c250000.i2c to group 16 [ 0.722484] iommu: Adding device 31e0000.i2c to group 17 [ 0.723138] iommu: Adding device sound to group 18 [ 0.723679] iommu: Adding device 3510000.hda to group 19 [ 0.724324] iommu: Adding device bc00000.rtcpu to group 20 [ 0.726511] iommu: Adding device 13e10000.host1x to group 21 [ 0.726962] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.727415] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.727774] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.728200] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.728596] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.728991] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.729398] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.729790] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.730323] iommu: Adding device 15340000.vic to group 30 [ 0.730749] iommu: Adding device 15380000.nvjpg to group 31 [ 0.731055] iommu: Adding device 15500000.tsec to group 32 [ 0.731339] iommu: Adding device 15100000.tsecb to group 33 [ 0.731641] iommu: Adding device 15480000.nvdec to group 34 [ 0.731923] iommu: Adding device 15140000.nvdec1 to group 35 [ 0.732205] iommu: Adding device 154c0000.nvenc to group 36 [ 0.732516] iommu: Adding device 15a80000.nvenc1 to group 37 [ 0.732928] iommu: Adding device 15880000.nvdla0 to group 38 [ 0.733408] iommu: Adding device 158c0000.nvdla1 to group 39 [ 0.733973] iommu: Adding device 15200000.nvdisplay to group 40 [ 0.734163] platform 15200000.nvdisplay: IOVA linear map 0x00000000a069d000(800000) [ 0.734174] platform 15200000.nvdisplay: IOVA linear map 0x00000000a0697000(3000) [ 0.738115] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.738199] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.738742] iommu: Adding device 15210000.nvdisplay to group 41 [ 0.738819] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.740498] iommu: Adding device 15c10000.vi to group 42 [ 0.740644] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.741062] iommu: Adding device 14800000.isp to group 43 [ 0.742055] iommu: Adding device 16000000.pva0 to group 44 [ 0.742617] iommu: Adding device 16800000.pva1 to group 45 [ 0.743023] iommu: Adding device 15810000.se to group 46 [ 0.743449] iommu: Adding device 15820000.se to group 47 [ 0.743747] iommu: Adding device 15830000.se to group 48 [ 0.744079] iommu: Adding device 15840000.se to group 49 [ 0.744369] iommu: Adding device c1a0000.aon to group 50 [ 0.746120] iommu: Adding device d000000.bpmp to group 51 [ 0.746501] bpmp: ping status is 0 [ 0.746625] bpmp d000000.bpmp: firmware tag is 57f8a77779f848bf2ecf21dabee5645f [ 0.749842] bpmp d000000.bpmp: probe ok [ 0.751355] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.751800] iommu: Adding device smmu_test to group 52 [ 0.752858] mc: mapped MMIO address: 0xffffff800a590000 -> 0x2c10000 [ 0.752879] mc: mapped MMIO address: 0xffffff800a5b0000 -> 0x2c20000 [ 0.752894] mc: mapped MMIO address: 0xffffff800a5d0000 -> 0x2c30000 [ 0.752910] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c40000 [ 0.752926] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c50000 [ 0.752944] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2b80000 [ 0.752959] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2b90000 [ 0.752974] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2ba0000 [ 0.752991] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2bb0000 [ 0.753006] mc: mapped MMIO address: 0xffffff800b090000 -> 0x1700000 [ 0.753021] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x1710000 [ 0.753035] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1720000 [ 0.753050] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1730000 [ 0.753079] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1740000 [ 0.753095] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1750000 [ 0.753110] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1760000 [ 0.753125] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1770000 [ 0.753194] mc-err: mcerr ops are set to t19x [ 0.759239] iommu: Adding device 2600000.dma to group 53 [ 0.765265] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.766461] GPIO line 339 (wifi-enable) hogged as output/high [ 0.766501] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.766535] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.766853] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.775267] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.775340] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.775404] GPIO line 266 (w-disable1) hogged as output/high [ 0.775438] GPIO line 264 (w-disable2) hogged as output/high [ 0.775790] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.778257] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.778271] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.779072] iommu: Adding device 3550000.xudc to group 54 [ 0.779766] iommu: Adding device 3610000.xhci to group 55 [ 0.782004] arm64_ras arm64_ras: probed [ 0.782423] ras_fhi_enable: FHI 468 enabled on CPU0 [ 0.782457] ras_fhi_enable: FHI 469 enabled on CPU1 [ 0.782518] ras_fhi_enable: FHI 470 enabled on CPU2 [ 0.782569] ras_fhi_enable: FHI 471 enabled on CPU3 [ 0.782631] ras_fhi_enable: FHI 472 enabled on CPU4 [ 0.782693] ras_fhi_enable: FHI 473 enabled on CPU5 [ 0.782878] carmel_ras_enable: RAS enabled on cpu0 [ 0.783037] carmel_ras_enable: RAS enabled on cpu1 [ 0.783213] carmel_ras_enable: RAS enabled on cpu2 [ 0.783381] carmel_ras_enable: RAS enabled on cpu3 [ 0.783565] carmel_ras_enable: RAS enabled on cpu4 [ 0.783746] carmel_ras_enable: RAS enabled on cpu5 [ 0.783819] carmel_ras carmel_ras: probed [ 0.784980] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 477, noc_nonsecure_irq = 476> [ 0.785499] tegra-cbb c600000.aon-noc: noc_secure_irq = 479, noc_nonsecure_irq = 478> [ 0.786481] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 481, noc_nonsecure_irq = 480> [ 0.787406] tegra-cbb be00000.rce-noc: noc_secure_irq = 483, noc_nonsecure_irq = 482> [ 0.788355] tegra-cbb b600000.sce-noc: noc_secure_irq = 485, noc_nonsecure_irq = 484> [ 0.788725] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.790115] vdd-ac-bat: 5000 mV [ 0.790555] vdd-sdmmc1-sw: 3300 mV [ 0.790933] vdd-1v8-sd: 1800 mV [ 0.791261] vdd-3v3-cvb: 3300 mV [ 0.791558] vdd-1v8-cvb: 1800 mV [ 0.791906] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.791945] vdd-epb-1v0: 1000 mV [ 0.792346] avdd-cam-2v8: 2800 mV [ 0.792685] vdd-fan: 5000 mV [ 0.793022] vdd-hdmi-5v0: 5000 mV [ 0.793334] vdd_sys_en: 1200 mV [ 0.831596] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.836414] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.836753] SCSI subsystem initialized [ 0.836971] libata version 3.00 loaded. [ 0.837189] usbcore: registered new interface driver usbfs [ 0.837272] usbcore: registered new interface driver hub [ 0.837392] usbcore: registered new device driver usb [ 0.849619] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.852718] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.861966] vdd-1v0: at 1000 mV [ 0.870010] vdd-1v8-hs: at 1800 mV [ 0.878053] vdd-1v8-ls: at 1800 mV [ 0.886033] vdd-1v8-ao: at 1800 mV [ 0.894082] vddio-ddr-1v1: at 1100 mV [ 0.901839] vdd-rtc: at 800 mV [ 0.903115] spmic-ldo1: at 2375 mV [ 0.913883] vdd-ao-3v3: at 3300 mV [ 0.925921] vddio-emmc-3v3: at 3300 mV [ 0.927229] spmic-ldo4: at 1587 mV [ 0.937957] vdd-usb-3v3: at 3300 mV [ 0.949997] vddio-sdmmc1-3v3: at 3300 mV [ 0.955305] vdd-csi-1v2: at 1200 mV [ 0.956791] spmic-ldo8: at 1800 mV [ 0.961752] GPIO line 246 (gpio_default) hogged as output/high [ 0.963138] GPIO line 247 (gpio_default) hogged as output/high [ 0.963487] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.963828] max77620 4-003c: max77620 probe successful [ 0.964484] media: Linux media interface: v0.10 [ 0.964531] Linux video capture interface: v2.00 [ 0.965902] pps_core: LinuxPPS API ver. 1 registered [ 0.965909] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.965927] PTP clock support registered [ 0.966219] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.966477] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.966507] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.969257] trusty trusty: trusty version: Built: 20:53:35 Oct 27 2020 [ 0.969320] trusty trusty: selected api version: 3 (requested 3) [ 0.970424] Advanced Linux Sound Architecture Driver Initialized. [ 0.970999] Bluetooth: Core ver 2.22 [ 0.971042] NET: Registered protocol family 31 [ 0.971049] Bluetooth: HCI device and connection manager initialized [ 0.971060] Bluetooth: HCI socket layer initialized [ 0.971068] Bluetooth: L2CAP socket layer initialized [ 0.971092] Bluetooth: SCO socket layer initialized [ 0.974132] camchar: rtcpu character device driver loaded [ 0.974857] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.974977] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.976775] clocksource: Switched to clocksource arch_sys_counter [ 1.023126] VFS: Disk quotas dquot_6.6.0 [ 1.023207] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.023525] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.024972] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.025029] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.025296] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.025304] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.025317] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.025325] nvmap_page_pool_init: Total RAM pages: 1983961 [ 1.025332] nvmap_page_pool_init: nvmap page pool size: 247995 pages (968 MB) [ 1.025589] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.026124] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.027696] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.041162] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.041373] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.041583] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.041784] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.042002] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.043145] la/ptsa driver initialized. [ 1.043453] NET: Registered protocol family 2 [ 1.044188] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.044469] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.045110] TCP: Hash tables configured (established 65536 bind 65536) [ 1.045163] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.045290] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.045722] NET: Registered protocol family 1 [ 1.046378] RPC: Registered named UNIX socket transport module. [ 1.046385] RPC: Registered udp transport module. [ 1.046390] RPC: Registered tcp transport module. [ 1.046394] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.046405] PCI: CLS 0 bytes, default 64 [ 1.046642] Trying to unpack rootfs image as initramfs... [ 1.231950] Freeing initrd memory: 5432K [ 1.251165] random: fast init done [ 1.255815] host1x 13e10000.host1x: initialized [ 1.258472] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.263486] audit: initializing netlink subsys (disabled) [ 1.263530] audit: type=2000 audit(0.888:1): initialized [ 1.264281] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.274925] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.276281] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.277024] 9p: Installing v9fs 9p2000 file system support [ 1.281683] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.281891] io scheduler noop registered [ 1.282111] io scheduler cfq registered (default) [ 1.285901] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.320524] iommu: Adding device 2993000.adsp to group 56 [ 1.427136] iommu: Adding device aconnect@2a41000:adsp_audio to group 57 [ 1.428056] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.441819] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.442292] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.442933] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.443458] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.443845] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.447195] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.447394] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.451302] tsec 15500000.tsec: initialized [ 1.453037] tsec 15100000.tsecb: initialized [ 1.457430] nvdec 15480000.nvdec: initialized [ 1.460125] nvdec 15140000.nvdec1: initialized [ 1.467134] falcon 15340000.vic: initialized [ 1.469271] falcon 15380000.nvjpg: initialized [ 1.471256] falcon 154c0000.nvenc: initialized [ 1.473301] falcon 15a80000.nvenc1: initialized [ 1.476903] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.478302] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.479637] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.481102] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.482515] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.483821] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.485166] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.486506] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.490230] t194-nvcsi 15a00000.nvcsi: initialized [ 1.496208] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.496618] scare-pigeon 14b00000.isp-thi: initialized [ 1.502543] pva 16000000.pva0: initialized [ 1.508213] pva 16800000.pva1: initialized [ 1.513378] nvdla 15880000.nvdla0: initialized [ 1.518336] nvdla 158c0000.nvdla1: initialized [ 1.519870] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.519886] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.519947] tegradccommon 15200000.dc_common: dma mapping done [ 1.520097] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=77 [ 1.520108] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.520458] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.520481] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.520756] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.520799] tegra_cec 3960000.tegra_cec: probed [ 1.521460] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.521515] generic_infoframe_type: 0x87 [ 1.521594] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.521641] tegradc 15200000.nvdisplay: Display dc.ffffff800bd10000 registered with id=0 [ 1.526720] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 7088400 KB/s [ 1.526729] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 800000000 Hz [ 1.526735] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.527067] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.527078] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.528222] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.530908] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.530917] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.533750] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.534777] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.534786] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.535085] kfuse 3830000.kfuse: initialized [ 1.537408] tegradc 15200000.nvdisplay: probed [ 1.540046] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.542479] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.543594] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.544437] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.545522] console [ttyTCU0] enabled [ 1.545877] [drm] Initialized [ 1.557487] brd: module loaded [ 1.562967] loop: module loaded [ 1.563062] tegra_profiler: version: 1.141, samples/io: 48/28 [ 1.563211] tegra_profiler: auth: init [ 1.563902] THERMAL EST: found 3 subdevs [ 1.563910] THERMAL EST num_resources: 0 [ 1.563916] [THERMAL EST subdev 0] [ 1.563923] [THERMAL EST subdev 1] [ 1.563961] [THERMAL EST subdev 2] [ 1.563972] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.564308] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.564313] THERMAL EST: thz register success. [ 1.564499] THERMAL EST: end of probe, return err: 0 [ 1.565310] sd: No Scsi addr parsed to reserve index [ 1.565341] hisi_sas: driver version v1.6 [ 1.575883] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.575893] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.575905] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.576173] 1 ofpart partitions found on MTD device spi6.0 [ 1.576180] Creating 1 MTD partitions on "spi6.0": [ 1.576222] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.578651] libphy: Fixed MDIO Bus: probed [ 1.579228] tun: Universal TUN/TAP device driver, 1.6 [ 1.579233] tun: (C) 1999-2004 Max Krasnyansky [ 1.580220] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.580225] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.580264] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.580268] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.580300] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.580304] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.580350] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.580355] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.590844] Console: switching to colour frame buffer device 240x67 [ 1.590981] tegradc 15200000.nvdisplay: fb registered [ 1.591246] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.591910] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.591992] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.594444] Parent Clock set for DC plld2 [ 1.646546] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.647239] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.647254] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.672912] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.672946] Extcon AUX1(HDMI) enable [ 1.673448] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.673483] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.673594] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.673642] tegradc 15210000.nvdisplay: Display dc.ffffff800d150000 registered with id=1 [ 1.673922] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.673931] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.683367] tegradc 15210000.nvdisplay: probed [ 1.683690] tegradc 15210000.nvdisplay: fb registered [ 1.687007] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.687016] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.687027] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.687041] tegradc 15210000.nvdisplay: blank - powerdown [ 1.687056] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.687061] Extcon DP: HPD disabled [ 1.687066] hpd: hpd_switch 0 [ 1.687071] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.687082] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.687091] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.808022] tegradc 15200000.nvdisplay: blank - powerdown [ 1.824474] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 7 8f e4 [ 1.824582] libphy: dwc_phy: probed [ 1.827187] PPP generic driver version 2.4.2 [ 1.827325] PPP BSD Compression module registered [ 1.827329] PPP Deflate Compression module registered [ 1.827346] PPP MPPE Compression module registered [ 1.827350] NET: Registered protocol family 24 [ 1.827394] usbcore: registered new interface driver r8152 [ 1.827423] usbcore: registered new interface driver asix [ 1.827449] usbcore: registered new interface driver ax88179_178a [ 1.827471] usbcore: registered new interface driver cdc_ether [ 1.827494] usbcore: registered new interface driver net1080 [ 1.827553] usbcore: registered new interface driver cdc_subset [ 1.827603] usbcore: registered new interface driver zaurus [ 1.827642] usbcore: registered new interface driver cdc_ncm [ 1.827802] VFIO - User Level meta-driver version: 0.3 [ 1.829743] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.829765] ehci-pci: EHCI PCI platform driver [ 1.829794] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.829802] ohci-pci: OHCI PCI platform driver [ 1.829828] ohci-platform: OHCI generic platform driver [ 1.835820] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.837848] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f5bbe400 id [ 1.838449] usbcore: registered new interface driver uas [ 1.838510] usbcore: registered new interface driver usb-storage [ 1.838703] usbcore: registered new interface driver usbserial [ 1.840237] tegra-xusb 3610000.xhci: Firmware timestamp: 2019-07-24 05:47:34 UTC, Version: 60.06 release [ 1.840268] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.840294] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.841027] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.841074] tegra-xusb 3610000.xhci: irq 463, io mem 0x03610000 [ 1.841254] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.841260] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.841265] usb usb1: Product: xHCI Host Controller [ 1.841270] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.841274] usb usb1: SerialNumber: 3610000.xhci [ 1.841852] hub 1-0:1.0: USB hub found [ 1.841903] hub 1-0:1.0: 4 ports detected [ 1.842401] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.842412] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.842423] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.842709] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.842715] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.842720] usb usb2: Product: xHCI Host Controller [ 1.842724] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.842728] usb usb2: SerialNumber: 3610000.xhci [ 1.843136] hub 2-0:1.0: USB hub found [ 1.843171] hub 2-0:1.0: 4 ports detected [ 1.843862] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.843956] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.845006] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.845014] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.845039] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.845303] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.845743] mousedev: PS/2 mouse device common for all mice [ 1.845876] usbcore: registered new interface driver xpad [ 1.846976] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.846981] Extcon AUX1(HDMI) disable [ 1.873520] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.874564] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.894829] tegradc 15200000.nvdisplay: unblank [ 1.896623] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.896985] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.905559] Parent Clock set for DC plld2 [ 1.910125] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.911541] tegradc 15200000.nvdisplay: hdmi: get RGB quant from EDID. [ 1.911552] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.946068] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.946071] Extcon AUX1(HDMI) enable [ 1.980641] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.982245] Wake73 for irq=42 [ 1.983537] rtc rtc1: alarm rtc device [ 1.983555] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.983583] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.983720] i2c /dev entries driver [ 1.986072] i2c i2c-2: Added multiplexed i2c bus 9 [ 1.986492] i2c i2c-2: Added multiplexed i2c bus 10 [ 1.986498] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 1.987064] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.010606] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.010665] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.010725] imx219 9-0010: board setup failed [ 2.010856] imx219: probe of 9-0010 failed with error -121 [ 2.011322] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.034552] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.034615] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.034649] imx219 10-0010: board setup failed [ 2.034733] imx219: probe of 10-0010 failed with error -121 [ 2.035936] max77620-power max20024-power: Event recorder REG_NVERC : 0x40 [ 2.042743] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 2.046882] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 2.046912] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 2.046956] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 2.047075] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 2.047148] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 2.047154] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 2.047406] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 2.047462] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 2.047468] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 2.047723] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 2.047778] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 2.047783] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 2.048135] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 2.048212] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 2.048218] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 2.048480] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 2.049173] FAN dev name: pwm-fan [ 2.049232] FAN:gpio request success. [ 2.049241] FAN: can't find tach_gpio [ 2.049268] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.049350] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.049690] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.049698] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.050271] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.050277] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.050282] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.050286] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.050291] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.050296] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.050301] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.050306] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.050311] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.050315] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.051186] device-mapper: uevent: version 1.0.3 [ 2.051571] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.055292] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.056479] cpuidle: Initializing cpuidle driver [ 2.057446] sdhci: Secure Digital Host Controller Interface driver [ 2.057449] sdhci: Copyright(c) Pierre Ossman [ 2.057451] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.057806] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 2.058681] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 2.060466] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 245 [ 2.064988] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.065969] tegra-se-nvhost 15810000.se: initialized [ 2.066960] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.067977] tegra-se-nvhost 15820000.se: initialized [ 2.069234] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.070272] tegra-se-nvhost 15830000.se: initialized [ 2.070935] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.071827] tegra-se-nvhost 15840000.se: initialized [ 2.072900] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.073146] hidraw: raw HID events driver (C) Jiri Kosina [ 2.075392] usbcore: registered new interface driver usbhid [ 2.075394] usbhid: USB HID core driver [ 2.079524] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.080690] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.081157] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.081748] denver_knobs_init:MTS_VERSION:50168445 [ 2.081897] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.082463] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.082899] t19x_cache tegra-cache: probed [ 2.085606] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.085635] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.086339] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.086754] PLL_AON clock registered [ 2.087990] Clocks initialized successfully [ 2.089569] nvpmodel: initialized successfully [ 2.090711] trusty-virtio trusty:virtio: initializing [ 2.090916] trusty_ipc virtio0: vring0: va(pa) ffffffc1e2b5a000(0) qsz 32 notifyid 1 [ 2.090926] trusty_ipc virtio0: vring1: va(pa) ffffffc1e2b70000(0) qsz 32 notifyid 2 [ 2.091055] trusty-virtio trusty:virtio: initializing done [ 2.091354] trusty_ipc virtio0: is online [ 2.091707] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.092146] usbcore: registered new interface driver snd-usb-audio [ 2.104935] gpio tegra-gpio wake8 for gpio=55(G:7) [ 2.105006] mmc0: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.112929] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.113220] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.113457] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.113658] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.172810] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.210014] OPE platform probe [ 2.210135] OPE platform probe successful [ 2.211776] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489 [ 2.211782] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.211785] usb 1-2: Product: 4-Port USB 2.0 Hub [ 2.211789] usb 1-2: Manufacturer: Generic [ 2.213287] hub 1-2:1.0: USB hub found [ 2.214542] hub 1-2:1.0: 4 ports detected [ 2.290249] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.290378] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.290490] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.290599] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.290705] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.290814] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.290920] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.291053] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.291187] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.291318] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.291408] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.291494] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.291577] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.291660] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.291745] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.291830] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.291919] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.292041] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.292150] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.292242] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.322082] u32 classifier [ 2.322084] Actions configured [ 2.322173] Initializing XFRM netlink socket [ 2.322592] NET: Registered protocol family 10 [ 2.323348] NET: Registered protocol family 17 [ 2.323359] NET: Registered protocol family 15 [ 2.323394] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.323493] Bluetooth: RFCOMM socket layer initialized [ 2.323510] Bluetooth: RFCOMM ver 1.11 [ 2.323517] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.323522] Bluetooth: HIDP socket layer initialized [ 2.323566] 9pnet: Installing 9P2000 support [ 2.323602] Key type dns_resolver registered [ 2.323906] Registered cp15_barrier emulation handler [ 2.323926] Registered setend emulation handler [ 2.325839] registered taskstats version 1 [ 2.326322] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.327444] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.327460] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.327468] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.327473] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.413594] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.436807] tegra-pcie-dw 14160000.pcie: link is up [ 2.437119] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.437127] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.437133] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.437139] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.437142] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.437173] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.437368] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.437602] iommu: Adding device 0004:00:00.0 to group 58 [ 2.438026] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 2.438162] pci 0004:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 2.438166] pci 0004:01:00.0: reg 0x10: [io size 0x0100] [ 2.438327] pci 0004:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 2.439068] pci 0004:01:00.0: supports D1 D2 [ 2.439071] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.439407] iommu: Adding device 0004:01:00.0 to group 59 [ 2.454062] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 2.454067] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.454074] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 2.454155] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.454181] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.454186] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 2.454192] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 2.454210] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 2.454268] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 2.454479] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.454483] pci 0004:01:00.0: Signaling PME through PCIe PME interrupt [ 2.454488] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.454566] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.456014] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.461326] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.461340] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.461354] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.461361] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 2.544804] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.555686] mmc0: hw tuning done ... [ 2.555719] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 2.556146] mmcblk0: mmc0:aaaa SD128 119 GiB [ 2.564310] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.580827] tegra-pcie-dw 141a0000.pcie: link is up [ 2.581002] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 2.581008] pci_bus 0005:00: root bus resource [bus 00-ff] [ 2.581014] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 2.581019] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 2.581023] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 2.581047] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 2.581193] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 2.581427] iommu: Adding device 0005:00:00.0 to group 60 [ 2.581674] pci 0005:01:00.0: [144d:a80a] type 00 class 0x010802 [ 2.581781] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.582783] iommu: Adding device 0005:01:00.0 to group 61 [ 2.593640] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 2.593651] pci 0005:01:00.0: BAR 0: assigned [mem 0x1f40000000-0x1f40003fff 64bit] [ 2.593723] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 2.593730] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 2.593744] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 2.593787] pci 0005:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 2.594014] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 2.594017] pci 0005:01:00.0: Signaling PME through PCIe PME interrupt [ 2.594022] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 2.594106] aer 0005:00:00.0:pcie002: service driver aer loaded [ 2.594532] nvme nvme0: pci function 0005:01:00.0 [ 2.595457] nvme 0005:01:00.0: enabling device (0000 -> 0002) [ 2.600860] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 2.604221] tegra-cbb 14040000.cv-noc: noc_secure_irq = 89, noc_nonsecure_irq = 88> [ 2.608928] tegra194-isp5 14800000.isp: initialized [ 2.609345] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 2.609349] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.616122] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 2.619080] tegra194-vi5 15c10000.vi: initialized [ 2.621947] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549 [ 2.621952] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.621955] usb 1-3: Product: Bluetooth Radio [ 2.621958] usb 1-3: Manufacturer: Realtek [ 2.621961] usb 1-3: SerialNumber: 00e04c000001 [ 2.623699] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 2.623812] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 2.624582] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 2.706557] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 2.706988] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 2.707193] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 2.707353] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 2.707764] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 2.707843] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 2.708087] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (65) [ 2.708090] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 2.709261] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=cf2bef3ad10e437272857b76308abef8ffb80bda [ 2.709786] gpio tegra-gpio wake67 for gpio=48(G:0) [ 2.709857] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 2.710007] input: gpio-keys as /devices/gpio-keys/input/input4 [ 2.741766] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:15 UTC (946688415) [ 2.742233] mmcblk mmc0:aaaa: Card claimed for testing. [ 2.783405] bpmp: mounted debugfs mirror [ 2.789522] vdd-1v8-sd: disabling [ 2.789526] vdd-1v8-cvb: disabling [ 2.789528] vdd-epb-1v0: disabling [ 2.789530] avdd-cam-2v8: disabling [ 2.789532] vdd-fan: disabling [ 2.789534] vdd_sys_en: disabling [ 2.789540] ALSA device list: [ 2.789543] #0: tegra-hda-xnx at 0x3518000 irq 64 [ 2.789545] #1: jetson-xaviernx-ape [ 2.920801] usb 1-2.3: new full-speed USB device number 4 using tegra-xusb [ 2.943869] usb 1-2.3: New USB device found, idVendor=046d, idProduct=c534 [ 2.943874] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.943878] usb 1-2.3: Product: USB Receiver [ 2.943880] usb 1-2.3: Manufacturer: Logitech [ 2.946510] input: Logitech USB Receiver as /devices/3610000.xhci/usb1/1-2/1-2.3/1-2.3:1.0/0003:046D:C534.0001/input/input5 [ 3.005487] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3610000.xhci-2.3/input0 [ 3.008198] input: Logitech USB Receiver as /devices/3610000.xhci/usb1/1-2/1-2.3/1-2.3:1.1/0003:046D:C534.0002/input/input6 [ 3.065253] hid-generic 0003:046D:C534.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3610000.xhci-2.3/input1 [ 3.956250] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 3.956254] Extcon HDMI: HPD enabled [ 3.956271] tegradc 15200000.nvdisplay: hdmi: plugged [ 3.958102] Freeing unused kernel memory: 8576K [ 3.997022] Root device found: mmcblk0p1 [ 3.998199] Found dev node: /dev/mmcblk0p1 [ 4.052085] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.053147] Rootfs mounted over mmcblk0p1 [ 4.088982] Switching from initrd to actual rootfs [ 4.291467] systemd[1]: System time before build time, advancing clock. [ 4.316073] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.319796] cgroup: cgroup2: unknown option "nsdelegate" [ 4.335944] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.336592] systemd[1]: Detected architecture arm64. [ 4.342737] systemd[1]: Set hostname to . [ 4.452969] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 4.452981] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.618855] random: systemd: uninitialized urandom read (16 bytes read) [ 4.618892] systemd[1]: Reached target User and Group Name Lookups. [ 4.619072] random: systemd: uninitialized urandom read (16 bytes read) [ 4.622091] systemd[1]: Created slice User and Session Slice. [ 4.622363] random: systemd: uninitialized urandom read (16 bytes read) [ 4.622734] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.622814] systemd[1]: Reached target Swap. [ 4.623926] systemd[1]: Created slice System Slice. [ 4.695544] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 4.814550] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 5.058018] systemd-journald[2343]: Received request to flush runtime journal from PID 1 [ 5.940005] random: crng init done [ 5.940153] random: 7 urandom warning(s) missed due to ratelimiting [ 6.004521] Wake76 for irq=199 [ 6.004529] Wake77 for irq=199 [ 6.004532] Wake78 for irq=199 [ 6.004535] Wake79 for irq=199 [ 6.004538] Wake80 for irq=199 [ 6.004541] Wake81 for irq=199 [ 6.004544] Wake82 for irq=199 [ 6.004597] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 6.004603] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 6.329640] usb 2-3: new SuperSpeedPlus USB device number 2 using tegra-xusb [ 6.370389] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489 [ 6.370399] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.370416] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.370420] usb 2-3: Manufacturer: Generic [ 6.380403] hub 2-3:1.0: USB hub found [ 6.382590] hub 2-3:1.0: 4 ports detected [ 6.420198] using random self ethernet address [ 6.420376] using random host ethernet address [ 6.437913] rtl88x2ce 0004:01:00.0: enabling device (0000 -> 0003) [ 6.602261] usbcore: registered new interface driver btusb [ 6.715081] rtk_btusb: Realtek Bluetooth USB driver ver 3.1 [ 6.715088] rtk_btcoex: rtk_btcoex_init: version: 1.2 [ 6.715092] rtk_btcoex: create workqueue [ 6.716522] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2 [ 6.716594] rtk_btusb: btusb_probe intf->cur_altsetting->desc.bInterfaceNumber 0 [ 6.716599] rtk_btusb: btusb_probe can_wakeup 1, may wakeup 0 [ 6.716602] rtk_btusb: patch_add [ 6.718186] rtk_btusb: auto suspend is disabled [ 6.718195] rtk_btusb: pid = 0x3549 [ 6.718199] rtk_btusb: patch_add: Reset gEVersion to 0xff [ 6.718218] rtk_btusb: set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); [ 6.726667] rtk_btusb: btusb_probe: done [ 6.726688] rtk_btusb: btusb_open start [ 6.726695] rtk_btusb: btusb_open hdev->promisc ==0 [ 6.726770] usbcore: registered new interface driver rtk_btusb [ 6.726890] rtk_btusb: download_patch start [ 6.726895] rtk_btusb: chip type value: 0x73 [ 6.726900] rtk_btusb: HCI reset. [ 6.737664] rtk_btusb: read_ver_rsp->lmp_subver = 0x8822 [ 6.737671] rtk_btusb: read_ver_rsp->hci_rev = 0xc [ 6.737675] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 6.737678] rtk_btusb: load_firmware start [ 6.737682] rtk_btusb: lmp_version = 0x8822 [ 6.737685] rtk_btusb: config filename rtl8822cu_config [ 6.740223] rtk_btusb: no bdaddr file /opt/bdaddr [ 6.740230] rtk_btusb: 55 ab 23 87 00 00 [ 6.740241] rtk_btusb: Config file length 6, new length 6 [ 6.740245] rtk_btusb: fw name is rtl8822cu_fw [ 6.754131] rtk_btusb: This is not 8723a, use new patch style! [ 6.754328] rtk_btusb: rtk_get_eversion: gEVersion 255 [ 6.755664] rtk_btusb: eversion->status = 0x0, eversion->version = 0x3 [ 6.755670] rtk_btusb: load_firmware: New gEVersion 3 [ 6.755675] rtk_btusb: rtk_get_fw_project_id: opcode 0, len 1, data 13 [ 6.755680] rtk_btusb: lmp_version is 8822, project_id is 8822, match! [ 6.755683] rtk_btusb: fw_version = 0x98a42f7 [ 6.755686] rtk_btusb: number_of_total_patch = 3 [ 6.755689] rtk_btusb: chipID 4 [ 6.755693] rtk_btusb: patch_length 0x55f0 [ 6.755696] rtk_btusb: start_offset 0x00005d00 [ 6.755701] rtk_btusb: Svn version: 21761 [ 6.755704] rtk_btusb: Coexistence: BTCOEX_20190509-0d0d [ 6.755707] rtk_btusb: buf_len = 0x55f6 [ 6.755732] rtk_btusb: fw: exists, config file: exists [ 6.755735] rtk_btusb: load_firmware done [ 6.755755] rtk_btusb: download_data start [ 6.869667] rtk_btusb: download_data done [ 6.869674] rtk_btusb: HCI reset. [ 6.880659] rtk_btusb: read_ver_rsp->lmp_subver = 0x42f7 [ 6.880666] rtk_btusb: read_ver_rsp->hci_rev = 0x98a [ 6.880670] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 6.880679] rtk_btusb: Rtk patch end 0 [ 6.880683] rtk_btusb: btusb_open set HCI_RUNNING [ 6.880708] rtk_btcoex: Open BTCOEX [ 6.880712] rtk_btusb: btusb_open end [ 6.884663] rtk_btcoex: BTCOEX hci_rev 0x098a [ 6.884671] rtk_btcoex: BTCOEX lmp_subver 0x42f7 [ 6.904675] rtk_btusb: btusb_notify: hci0 evt 3 [ 6.918166] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.918186] Bluetooth: BNEP socket layer initialized [ 6.956815] usb 2-3: usb_suspend_both: status 0 [ 6.956990] usb usb2: usb_suspend_both: status 0 [ 7.574248] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.639871] Mass Storage Function, version: 2009/09/11 [ 7.639877] LUN: removable file: (no medium) [ 7.645439] using random self ethernet address [ 7.645443] using random host ethernet address [ 7.893672] gpio tegra-gpio wake20 for gpio=52(G:4) [ 7.899948] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.910807] rndis0: HOST MAC 66:7a:2f:4e:e0:40 [ 7.911629] rndis0: MAC 66:7a:2f:4e:e0:41 [ 7.912179] usb0: HOST MAC 66:7a:2f:4e:e0:42 [ 7.912212] usb0: MAC 66:7a:2f:4e:e0:43 [ 7.912231] tegra-xudc-new 3550000.xudc: exiting ELPG [ 7.912926] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 7.912945] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 7.912996] tegra-xudc-new 3550000.xudc: entering ELPG [ 7.913214] tegra-xudc-new 3550000.xudc: entering ELPG done [ 7.913269] tegra-xudc-new 3550000.xudc: exiting ELPG [ 7.913823] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 7.913852] tegra-xudc-new 3550000.xudc: entering ELPG [ 7.914109] tegra-xudc-new 3550000.xudc: entering ELPG done [ 7.914990] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.206851] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.210615] l4tbr0: port 1(rndis0) entered blocking state [ 8.210618] l4tbr0: port 1(rndis0) entered disabled state [ 8.210806] device rndis0 entered promiscuous mode [ 8.216572] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 8.221629] l4tbr0: port 2(usb0) entered blocking state [ 8.221633] l4tbr0: port 2(usb0) entered disabled state [ 8.221836] device usb0 entered promiscuous mode [ 8.229513] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 8.340492] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.228580] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 9.686740] zram: Added device: zram0 [ 9.690400] zram: Added device: zram1 [ 9.691498] zram: Added device: zram2 [ 9.694608] zram: Added device: zram3 [ 9.697518] zram: Added device: zram4 [ 9.701671] zram: Added device: zram5 [ 9.752062] zram0: detected capacity change from 0 to 678387712 [ 9.809077] Adding 662484k swap on /dev/zram0. Priority:5 extents:1 across:662484k SS [ 9.822191] zram1: detected capacity change from 0 to 678387712 [ 9.856308] Adding 662484k swap on /dev/zram1. Priority:5 extents:1 across:662484k SS [ 9.866002] zram2: detected capacity change from 0 to 678387712 [ 9.887143] Adding 662484k swap on /dev/zram2. Priority:5 extents:1 across:662484k SS [ 9.891655] zram3: detected capacity change from 0 to 678387712 [ 9.915704] Adding 662484k swap on /dev/zram3. Priority:5 extents:1 across:662484k SS [ 9.918661] zram4: detected capacity change from 0 to 678387712 [ 9.933031] Adding 662484k swap on /dev/zram4. Priority:5 extents:1 across:662484k SS [ 9.936069] zram5: detected capacity change from 0 to 678387712 [ 9.954491] Adding 662484k swap on /dev/zram5. Priority:5 extents:1 across:662484k SS [ 11.741993] tegradc 15200000.nvdisplay: blank - powerdown [ 11.795127] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 11.795131] Extcon AUX1(HDMI) disable [ 11.819700] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 11.821022] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 11.821244] tegradc 15200000.nvdisplay: unblank [ 11.824547] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 11.825700] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 11.828291] Parent Clock set for DC plld2 [ 11.834512] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 11.836217] tegradc 15200000.nvdisplay: hdmi: get RGB quant from EDID. [ 11.836228] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 11.871780] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 11.871783] Extcon AUX1(HDMI) enable [ 11.872279] tegradc 15200000.nvdisplay: unblank [ 11.872293] tegradc 15210000.nvdisplay: blank - powerdown [ 12.793382] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 17.226831] fuse init (API version 7.26) [ 18.620860] tegradc 15200000.nvdisplay: unblank [ 18.620873] tegradc 15210000.nvdisplay: blank - powerdown [ 506.672060] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 585.071783] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 777.711486] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 859.471323] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 1039.790568] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 1124.909464] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 1296.267953] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 1382.507344] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 1558.346375] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 1654.665889] FAN cooling trip_level:0 cur_temp:37750 trip_temps[1]:46000 [ 1820.425188] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 1917.864956] FAN cooling trip_level:0 cur_temp:37750 trip_temps[1]:46000 [ 2083.624303] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 2179.943919] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 2346.823123] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 2445.382879] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 2608.902245] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 2707.461764] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 2868.741274] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 2970.660910] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 3128.580312] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 3229.379825] FAN cooling trip_level:0 cur_temp:37750 trip_temps[1]:46000 [ 3388.419210] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 3489.218857] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 3648.258249] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 3750.177975] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 3912.577425] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 4017.856875] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 4178.016411] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 4281.056060] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 4437.855502] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 4542.014934] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 4701.054331] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 4801.853961] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 4963.133442] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 5069.533177] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 5234.172419] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 5339.451978] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 5496.251509] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 5601.531125] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 5758.330493] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 5863.610029] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 6022.649427] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 6127.929050] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 6285.835693] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 6389.987043] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 6546.776486] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 6647.570802] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 6764.061090] usb 2-3.2: new SuperSpeed USB device number 3 using tegra-xusb [ 6764.081384] usb 2-3.2: LPM exit latency is zeroed, disabling LPM. [ 6764.082179] usb 2-3.2: New USB device found, idVendor=2560, idProduct=c124 [ 6764.082189] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6764.082195] usb 2-3.2: Product: See3CAM_20CUG [ 6764.082200] usb 2-3.2: Manufacturer: e-con systems [ 6764.082206] usb 2-3.2: SerialNumber: 32209904 [ 6764.085635] hid-generic 0003:2560:C124.0003: hidraw2: USB HID v1.11 Device [e-con systems See3CAM_20CUG] on usb-3610000.xhci-3.2/input2 [ 6764.133969] uvcvideo: Found UVC 1.00 device See3CAM_20CUG (2560:c124) [ 6764.138012] uvcvideo 2-3.2:1.0: Entity type for entity Extension 3 was not initialized! [ 6764.138212] uvcvideo 2-3.2:1.0: Entity type for entity Processing 2 was not initialized! [ 6764.138363] uvcvideo 2-3.2:1.0: Entity type for entity Camera 1 was not initialized! [ 6764.138911] input: See3CAM_20CUG as /devices/3610000.xhci/usb2/2-3/2-3.2/2-3.2:1.0/input/input7 [ 6764.139645] usbcore: registered new interface driver uvcvideo [ 6764.139652] USB Video Class driver (1.1.1) [ 6766.168774] usb 2-3.2: usb_suspend_both: status 0 [ 6766.224766] usb 2-3: usb_suspend_both: status 0 [ 6766.225012] usb usb2: usb_suspend_both: status 0 [ 6804.363365] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 6905.159229] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 7061.953734] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 7164.990466] FAN cooling trip_level:0 cur_temp:37850 trip_temps[1]:46000 [ 7321.786066] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 7423.703413] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 7584.979423] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 7689.136941] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 7804.098429] usb 2-3.1: new SuperSpeed USB device number 4 using tegra-xusb [ 7804.118757] usb 2-3.1: LPM exit latency is zeroed, disabling LPM. [ 7804.119542] usb 2-3.1: New USB device found, idVendor=2560, idProduct=c124 [ 7804.119556] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7804.119563] usb 2-3.1: Product: See3CAM_20CUG [ 7804.119580] usb 2-3.1: Manufacturer: e-con systems [ 7804.119586] usb 2-3.1: SerialNumber: 320F9904 [ 7804.122006] uvcvideo: Found UVC 1.00 device See3CAM_20CUG (2560:c124) [ 7804.124045] uvcvideo 2-3.1:1.0: Entity type for entity Extension 3 was not initialized! [ 7804.124242] uvcvideo 2-3.1:1.0: Entity type for entity Processing 2 was not initialized! [ 7804.124413] uvcvideo 2-3.1:1.0: Entity type for entity Camera 1 was not initialized! [ 7804.124973] input: See3CAM_20CUG as /devices/3610000.xhci/usb2/2-3/2-3.1/2-3.1:1.0/input/input8 [ 7804.127172] hid-generic 0003:2560:C124.0004: hidraw3: USB HID v1.11 Device [e-con systems See3CAM_20CUG] on usb-3610000.xhci-3.1/input2 [ 7806.194169] usb 2-3.1: usb_suspend_both: status 0 [ 7806.250155] usb 2-3: usb_suspend_both: status 0 [ 7806.250332] usb usb2: usb_suspend_both: status 0 [ 7811.374271] usb 2-3.4: new SuperSpeed USB device number 5 using tegra-xusb [ 7811.394612] usb 2-3.4: LPM exit latency is zeroed, disabling LPM. [ 7811.395384] usb 2-3.4: New USB device found, idVendor=2560, idProduct=c124 [ 7811.395393] usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7811.395400] usb 2-3.4: Product: See3CAM_20CUG [ 7811.395405] usb 2-3.4: Manufacturer: e-con systems [ 7811.395410] usb 2-3.4: SerialNumber: 3C2A9904 [ 7811.396864] uvcvideo: Found UVC 1.00 device See3CAM_20CUG (2560:c124) [ 7811.398403] uvcvideo 2-3.4:1.0: Entity type for entity Extension 3 was not initialized! [ 7811.398606] uvcvideo 2-3.4:1.0: Entity type for entity Processing 2 was not initialized! [ 7811.398746] uvcvideo 2-3.4:1.0: Entity type for entity Camera 1 was not initialized! [ 7811.399192] input: See3CAM_20CUG as /devices/3610000.xhci/usb2/2-3/2-3.4/2-3.4:1.0/input/input9 [ 7811.400788] hid-generic 0003:2560:C124.0005: hidraw4: USB HID v1.11 Device [e-con systems See3CAM_20CUG] on usb-3610000.xhci-3.4/input2 [ 7814.146051] usb 2-3.4: usb_suspend_both: status 0 [ 7814.202023] usb 2-3: usb_suspend_both: status 0 [ 7814.202290] usb usb2: usb_suspend_both: status 0 [ 7836.973771] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [ 9109.201573] usb 2-3.1: usb_suspend_both: status 0 [ 9109.225560] usb 2-3.2: usb_suspend_both: status 0 [ 9110.249553] usb 2-3.4: usb_suspend_both: status 0 [ 9110.305532] usb 2-3: usb_suspend_both: status 0 [ 9110.305713] usb usb2: usb_suspend_both: status 0 [ 9110.682370] usb 2-3.1: USB disconnect, device number 4 [ 9110.793572] usb 2-3: usb_suspend_both: status 0 [ 9110.793864] usb usb2: usb_suspend_both: status 0 [ 9111.870249] usb 2-3.2: USB disconnect, device number 3 [ 9111.993546] usb 2-3: usb_suspend_both: status 0 [ 9111.993781] usb usb2: usb_suspend_both: status 0 [ 9117.873673] usb 2-3.2: new SuperSpeed USB device number 6 using tegra-xusb [ 9117.893912] usb 2-3.2: LPM exit latency is zeroed, disabling LPM. [ 9117.894641] usb 2-3.2: New USB device found, idVendor=2560, idProduct=c124 [ 9117.894650] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9117.894656] usb 2-3.2: Product: See3CAM_20CUG [ 9117.894662] usb 2-3.2: Manufacturer: e-con systems [ 9117.894667] usb 2-3.2: SerialNumber: 320F9904 [ 9117.896019] uvcvideo: Found UVC 1.00 device See3CAM_20CUG (2560:c124) [ 9117.900962] uvcvideo 2-3.2:1.0: Entity type for entity Extension 3 was not initialized! [ 9117.901156] uvcvideo 2-3.2:1.0: Entity type for entity Processing 2 was not initialized! [ 9117.901304] uvcvideo 2-3.2:1.0: Entity type for entity Camera 1 was not initialized! [ 9117.901759] input: See3CAM_20CUG as /devices/3610000.xhci/usb2/2-3/2-3.2/2-3.2:1.0/input/input10 [ 9117.903521] hid-generic 0003:2560:C124.0006: hidraw2: USB HID v1.11 Device [e-con systems See3CAM_20CUG] on usb-3610000.xhci-3.2/input2 [ 9119.245605] usb 2-3.1: new SuperSpeed USB device number 7 using tegra-xusb [ 9119.265896] usb 2-3.1: LPM exit latency is zeroed, disabling LPM. [ 9119.266687] usb 2-3.1: New USB device found, idVendor=2560, idProduct=c124 [ 9119.266695] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9119.266704] usb 2-3.1: Product: See3CAM_20CUG [ 9119.266735] usb 2-3.1: Manufacturer: e-con systems [ 9119.266740] usb 2-3.1: SerialNumber: 32209904 [ 9119.268209] uvcvideo: Found UVC 1.00 device See3CAM_20CUG (2560:c124) [ 9119.269481] uvcvideo 2-3.1:1.0: Entity type for entity Extension 3 was not initialized! [ 9119.269671] uvcvideo 2-3.1:1.0: Entity type for entity Processing 2 was not initialized! [ 9119.269814] uvcvideo 2-3.1:1.0: Entity type for entity Camera 1 was not initialized! [ 9119.270395] input: See3CAM_20CUG as /devices/3610000.xhci/usb2/2-3/2-3.1/2-3.1:1.0/input/input11 [ 9119.272348] hid-generic 0003:2560:C124.0007: hidraw3: USB HID v1.11 Device [e-con systems See3CAM_20CUG] on usb-3610000.xhci-3.1/input2 [ 9120.233382] usb 2-3.2: usb_suspend_both: status 0 [10156.022275] uvcvideo: Failed to resubmit video URB (-1). [10156.022473] uvcvideo: Failed to resubmit video URB (-1). [10157.271063] usb 2-3.1: usb_suspend_both: status 0 [10158.039064] usb 2-3.2: usb_suspend_both: status 0 [10158.119018] usb 2-3.4: usb_suspend_both: status 0 [10158.175014] usb 2-3: usb_suspend_both: status 0 [10158.175186] usb usb2: usb_suspend_both: status 0 [10158.407761] usb 2-3.1: USB disconnect, device number 7 [10158.523036] usb 2-3: usb_suspend_both: status 0 [10158.523222] usb usb2: usb_suspend_both: status 0 [10159.039862] usb 2-3.2: USB disconnect, device number 6 [10159.147030] usb 2-3: usb_suspend_both: status 0 [10159.147222] usb usb2: usb_suspend_both: status 0 [10160.219802] usb 2-3.4: USB disconnect, device number 5 [10160.319024] usb 2-3: usb_suspend_both: status 0 [10160.319203] usb usb2: usb_suspend_both: status 0 [10182.906787] usb 2-3.2: new SuperSpeed USB device number 8 using tegra-xusb [10182.927092] usb 2-3.2: LPM exit latency is zeroed, disabling LPM. [10182.927883] usb 2-3.2: New USB device found, idVendor=2560, idProduct=c124 [10182.927892] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [10182.927899] usb 2-3.2: Product: See3CAM_20CUG [10182.927905] usb 2-3.2: Manufacturer: e-con systems [10182.927910] usb 2-3.2: SerialNumber: 32209904 [10182.929278] uvcvideo: Found UVC 1.00 device See3CAM_20CUG (2560:c124) [10182.930925] uvcvideo 2-3.2:1.0: Entity type for entity Extension 3 was not initialized! [10182.931114] uvcvideo 2-3.2:1.0: Entity type for entity Processing 2 was not initialized! [10182.931262] uvcvideo 2-3.2:1.0: Entity type for entity Camera 1 was not initialized! [10182.931853] input: See3CAM_20CUG as /devices/3610000.xhci/usb2/2-3/2-3.2/2-3.2:1.0/input/input12 [10182.934070] hid-generic 0003:2560:C124.0008: hidraw2: USB HID v1.11 Device [e-con systems See3CAM_20CUG] on usb-3610000.xhci-3.2/input2 [10185.174536] usb 2-3.2: usb_suspend_both: status 0 [10185.230509] usb 2-3: usb_suspend_both: status 0 [10185.230702] usb usb2: usb_suspend_both: status 0 [10186.074740] usb 2-3.1: new SuperSpeed USB device number 9 using tegra-xusb [10186.095013] usb 2-3.1: LPM exit latency is zeroed, disabling LPM. [10186.095788] usb 2-3.1: New USB device found, idVendor=2560, idProduct=c124 [10186.095797] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [10186.095803] usb 2-3.1: Product: See3CAM_20CUG [10186.095809] usb 2-3.1: Manufacturer: e-con systems [10186.095814] usb 2-3.1: SerialNumber: 320F9904 [10186.097154] uvcvideo: Found UVC 1.00 device See3CAM_20CUG (2560:c124) [10186.098378] uvcvideo 2-3.1:1.0: Entity type for entity Extension 3 was not initialized! [10186.098619] uvcvideo 2-3.1:1.0: Entity type for entity Processing 2 was not initialized! [10186.098780] uvcvideo 2-3.1:1.0: Entity type for entity Camera 1 was not initialized! [10186.099299] input: See3CAM_20CUG as /devices/3610000.xhci/usb2/2-3/2-3.1/2-3.1:1.0/input/input13 [10186.101222] hid-generic 0003:2560:C124.0009: hidraw3: USB HID v1.11 Device [e-con systems See3CAM_20CUG] on usb-3610000.xhci-3.1/input2 [10188.162472] usb 2-3.1: usb_suspend_both: status 0 [10188.218519] usb 2-3: usb_suspend_both: status 0 [10188.218729] usb usb2: usb_suspend_both: status 0 [10189.986692] usb 2-3.4: new SuperSpeed USB device number 10 using tegra-xusb [10190.006958] usb 2-3.4: LPM exit latency is zeroed, disabling LPM. [10190.007713] usb 2-3.4: New USB device found, idVendor=2560, idProduct=c124 [10190.007721] usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [10190.007727] usb 2-3.4: Product: See3CAM_20CUG [10190.007733] usb 2-3.4: Manufacturer: e-con systems [10190.007738] usb 2-3.4: SerialNumber: 3C2A9904 [10190.009181] uvcvideo: Found UVC 1.00 device See3CAM_20CUG (2560:c124) [10190.012353] uvcvideo 2-3.4:1.0: Entity type for entity Extension 3 was not initialized! [10190.012542] uvcvideo 2-3.4:1.0: Entity type for entity Processing 2 was not initialized! [10190.012709] uvcvideo 2-3.4:1.0: Entity type for entity Camera 1 was not initialized! [10190.013323] input: See3CAM_20CUG as /devices/3610000.xhci/usb2/2-3/2-3.4/2-3.4:1.0/input/input14 [10190.015470] hid-generic 0003:2560:C124.000A: hidraw4: USB HID v1.11 Device [e-con systems See3CAM_20CUG] on usb-3610000.xhci-3.4/input2 [11777.214758] uvcvideo: Non-zero status (-71) in video completion handler. [11777.643257] uvcvideo: Non-zero status (-71) in video completion handler. [11777.926621] uvcvideo: Non-zero status (-71) in video completion handler. [11777.931284] uvcvideo: Non-zero status (-71) in video completion handler. [11778.096272] uvcvideo: Non-zero status (-71) in video completion handler. [11778.201265] uvcvideo: Non-zero status (-71) in video completion handler. [11778.581257] uvcvideo: Non-zero status (-71) in video completion handler. [11778.918256] uvcvideo: Non-zero status (-71) in video completion handler. [11779.466249] uvcvideo: Non-zero status (-71) in video completion handler. [11779.510244] uvcvideo: Non-zero status (-71) in video completion handler. [11779.860235] uvcvideo: Non-zero status (-71) in video completion handler. [11779.927232] uvcvideo: Non-zero status (-71) in video completion handler. [11779.982227] uvcvideo: Non-zero status (-71) in video completion handler. [11779.991226] uvcvideo: Non-zero status (-71) in video completion handler. [11780.041236] uvcvideo: Non-zero status (-71) in video completion handler. [11780.081236] uvcvideo: Non-zero status (-71) in video completion handler. [11780.327245] uvcvideo: Non-zero status (-71) in video completion handler. [11780.731209] uvcvideo: Non-zero status (-71) in video completion handler. [11780.921358] uvcvideo: Non-zero status (-71) in video completion handler. [11781.194202] uvcvideo: Non-zero status (-71) in video completion handler. [11781.238068] uvcvideo: Non-zero status (-71) in video completion handler. [11781.354199] uvcvideo: Non-zero status (-71) in video completion handler. [11781.385198] uvcvideo: Non-zero status (-71) in video completion handler. [11781.510199] uvcvideo: Non-zero status (-71) in video completion handler. [11782.527190] uvcvideo: Non-zero status (-71) in video completion handler. [11783.989153] uvcvideo: Non-zero status (-71) in video completion handler. [11784.688131] uvcvideo: Non-zero status (-71) in video completion handler. [11784.923138] uvcvideo: Non-zero status (-71) in video completion handler. [11784.939124] uvcvideo: Non-zero status (-71) in video completion handler. [11784.972130] uvcvideo: Non-zero status (-71) in video completion handler. [11785.106125] uvcvideo: Non-zero status (-71) in video completion handler. [11785.155325] uvcvideo: Non-zero status (-71) in video completion handler. [11785.199127] uvcvideo: Non-zero status (-71) in video completion handler. [11785.398120] uvcvideo: Non-zero status (-71) in video completion handler. [11785.885110] uvcvideo: Non-zero status (-71) in video completion handler. [11785.889106] uvcvideo: Non-zero status (-71) in video completion handler. [11786.185107] uvcvideo: Non-zero status (-71) in video completion handler. [11787.439078] uvcvideo: Non-zero status (-71) in video completion handler. [11787.839113] uvcvideo: Non-zero status (-71) in video completion handler. [11788.839224] uvcvideo: Non-zero status (-71) in video completion handler. [11788.939057] uvcvideo: Non-zero status (-71) in video completion handler. [11790.967016] uvcvideo: Non-zero status (-71) in video completion handler. [11791.182018] uvcvideo: Non-zero status (-71) in video completion handler. [11791.400001] uvcvideo: Non-zero status (-71) in video completion handler. [11791.543006] uvcvideo: Non-zero status (-71) in video completion handler. [11791.667001] uvcvideo: Non-zero status (-71) in video completion handler. [11792.028995] uvcvideo: Non-zero status (-71) in video completion handler. [11792.058991] uvcvideo: Non-zero status (-71) in video completion handler. [11792.155994] uvcvideo: Non-zero status (-71) in video completion handler. [11792.190994] uvcvideo: Non-zero status (-71) in video completion handler. [11792.564993] uvcvideo: Non-zero status (-71) in video completion handler. [11792.672987] uvcvideo: Non-zero status (-71) in video completion handler. [11792.889982] uvcvideo: Non-zero status (-71) in video completion handler. [11792.988979] uvcvideo: Non-zero status (-71) in video completion handler. [11793.156984] uvcvideo: Non-zero status (-71) in video completion handler. [11794.153957] uvcvideo: Non-zero status (-71) in video completion handler. [11794.938933] uvcvideo: Non-zero status (-71) in video completion handler. [12229.119212] usb 2-3.1: usb_suspend_both: status 0 [12230.103173] usb 2-3.2: usb_suspend_both: status 0 [12231.127166] usb 2-3.4: usb_suspend_both: status 0 [12231.183172] usb 2-3: usb_suspend_both: status 0 [12231.183390] usb usb2: usb_suspend_both: status 0 [12236.850588] uvcvideo: Non-zero status (-71) in video completion handler. [12236.851843] uvcvideo: Non-zero status (-71) in video completion handler. [12236.853105] uvcvideo: Non-zero status (-71) in video completion handler. [12236.854343] uvcvideo: Non-zero status (-71) in video completion handler. [12236.855598] uvcvideo: Non-zero status (-71) in video completion handler. [12236.856840] uvcvideo: Non-zero status (-71) in video completion handler. [12236.858082] uvcvideo: Non-zero status (-71) in video completion handler. [12236.859334] uvcvideo: Non-zero status (-71) in video completion handler. [12236.860579] uvcvideo: Non-zero status (-71) in video completion handler. [12236.861823] uvcvideo: Non-zero status (-71) in video completion handler. [12236.863064] uvcvideo: Non-zero status (-71) in video completion handler. [12236.864324] uvcvideo: Non-zero status (-71) in video completion handler. [12236.865570] uvcvideo: Non-zero status (-71) in video completion handler. [12236.866812] uvcvideo: Non-zero status (-71) in video completion handler. [12236.868069] uvcvideo: Non-zero status (-71) in video completion handler. [12236.869319] uvcvideo: Non-zero status (-71) in video completion handler. [12236.870596] uvcvideo: Non-zero status (-71) in video completion handler. [12236.875005] uvcvideo: Non-zero status (-71) in video completion handler. [12236.881718] uvcvideo: Non-zero status (-71) in video completion handler. [12236.888204] uvcvideo: Non-zero status (-71) in video completion handler. [12236.894931] uvcvideo: Non-zero status (-71) in video completion handler. [12236.901935] uvcvideo: Non-zero status (-71) in video completion handler. [12236.908407] uvcvideo: Non-zero status (-71) in video completion handler. [12236.915406] uvcvideo: Non-zero status (-71) in video completion handler. [12236.922147] uvcvideo: Non-zero status (-71) in video completion handler. [12236.928887] uvcvideo: Non-zero status (-71) in video completion handler. [12236.935616] uvcvideo: Non-zero status (-71) in video completion handler. [12236.942093] uvcvideo: Non-zero status (-71) in video completion handler. [12236.949089] uvcvideo: Non-zero status (-71) in video completion handler. [12236.955838] uvcvideo: Non-zero status (-71) in video completion handler. [12236.962568] uvcvideo: Non-zero status (-71) in video completion handler. [12236.969046] uvcvideo: Non-zero status (-71) in video completion handler. [12236.976037] uvcvideo: Non-zero status (-71) in video completion handler. [12236.982525] uvcvideo: Non-zero status (-71) in video completion handler. [12236.989256] uvcvideo: Non-zero status (-71) in video completion handler. [12236.996261] uvcvideo: Non-zero status (-71) in video completion handler. [12237.002989] uvcvideo: Non-zero status (-71) in video completion handler. [12237.009722] uvcvideo: Non-zero status (-71) in video completion handler. [12237.016196] uvcvideo: Non-zero status (-71) in video completion handler. [12237.023203] uvcvideo: Non-zero status (-71) in video completion handler. [12237.029938] uvcvideo: Non-zero status (-71) in video completion handler. [12237.036416] uvcvideo: Non-zero status (-71) in video completion handler. [12237.043170] uvcvideo: Non-zero status (-71) in video completion handler. [12237.049894] uvcvideo: Non-zero status (-71) in video completion handler. [12237.056896] uvcvideo: Non-zero status (-71) in video completion handler. [12237.063645] uvcvideo: Non-zero status (-71) in video completion handler. [12237.070104] uvcvideo: Non-zero status (-71) in video completion handler. [12237.077099] uvcvideo: Non-zero status (-71) in video completion handler. [12237.083853] uvcvideo: Non-zero status (-71) in video completion handler. [12237.090583] uvcvideo: Non-zero status (-71) in video completion handler. [12237.097317] uvcvideo: Non-zero status (-71) in video completion handler. [12237.103795] uvcvideo: Non-zero status (-71) in video completion handler. [12237.110530] uvcvideo: Non-zero status (-71) in video completion handler. [12237.117529] uvcvideo: Non-zero status (-71) in video completion handler. [12237.124271] uvcvideo: Non-zero status (-71) in video completion handler. [12237.131025] uvcvideo: Non-zero status (-71) in video completion handler. [12237.137740] uvcvideo: Non-zero status (-71) in video completion handler. [12237.279096] usb 2-3.2: usb_suspend_both: status 0 [12238.295103] usb 2-3.4: usb_suspend_both: status 0 [12241.135106] usb 2-3.1: usb_suspend_both: status 0 [12241.193495] usb 2-3: usb_suspend_both: status 0 [12241.193680] usb usb2: usb_suspend_both: status 0 [12245.043869] usb 2-3.1: USB disconnect, device number 9 [12245.135056] usb 2-3: usb_suspend_both: status 0 [12245.135250] usb usb2: usb_suspend_both: status 0 [12251.971184] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [12289.386810] usb 2-3.1: new SuperSpeed USB device number 11 using tegra-xusb [12289.407126] usb 2-3.1: LPM exit latency is zeroed, disabling LPM. [12289.407907] usb 2-3.1: New USB device found, idVendor=2560, idProduct=c124 [12289.407915] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [12289.407921] usb 2-3.1: Product: See3CAM_20CUG [12289.407927] usb 2-3.1: Manufacturer: e-con systems [12289.407932] usb 2-3.1: SerialNumber: 320F9904 [12289.409346] uvcvideo: Found UVC 1.00 device See3CAM_20CUG (2560:c124) [12289.410751] uvcvideo 2-3.1:1.0: Entity type for entity Extension 3 was not initialized! [12289.410976] uvcvideo 2-3.1:1.0: Entity type for entity Processing 2 was not initialized! [12289.411125] uvcvideo 2-3.1:1.0: Entity type for entity Camera 1 was not initialized! [12289.411592] input: See3CAM_20CUG as /devices/3610000.xhci/usb2/2-3/2-3.1/2-3.1:1.0/input/input15 [12289.413333] hid-generic 0003:2560:C124.000B: hidraw3: USB HID v1.11 Device [e-con systems See3CAM_20CUG] on usb-3610000.xhci-3.1/input2 [12292.054579] usb 2-3.1: usb_suspend_both: status 0 [12292.110571] usb 2-3: usb_suspend_both: status 0 [12292.110735] usb usb2: usb_suspend_both: status 0 [12296.150559] usb 2-3.1: usb_suspend_both: status 0 [12296.150583] usb 2-3.4: usb_suspend_both: status 0 [12299.222494] usb 2-3.4: usb_suspend_both: status 0 [12338.214288] FAN rising trip_level:1 cur_temp:46050 trip_temps[2]:60000 [14407.102888] usb 2-3.1: usb_suspend_both: status 0 [14407.102914] usb 2-3.2: usb_suspend_both: status 0 [14408.126867] usb 2-3.4: usb_suspend_both: status 0 [14408.182864] usb 2-3: usb_suspend_both: status 0 [14408.183044] usb usb2: usb_suspend_both: status 0 [14408.699705] usb 2-3.1: USB disconnect, device number 11 [14408.814939] usb 2-3: usb_suspend_both: status 0 [14408.815172] usb usb2: usb_suspend_both: status 0 [14425.491068] usb 2-3.1: new SuperSpeed USB device number 12 using tegra-xusb [14425.511395] usb 2-3.1: LPM exit latency is zeroed, disabling LPM. [14425.512225] usb 2-3.1: New USB device found, idVendor=2560, idProduct=c124 [14425.512233] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [14425.512240] usb 2-3.1: Product: See3CAM_20CUG [14425.512245] usb 2-3.1: Manufacturer: e-con systems [14425.512251] usb 2-3.1: SerialNumber: 320F9904 [14425.513626] uvcvideo: Found UVC 1.00 device See3CAM_20CUG (2560:c124) [14425.514892] uvcvideo 2-3.1:1.0: Entity type for entity Extension 3 was not initialized! [14425.515072] uvcvideo 2-3.1:1.0: Entity type for entity Processing 2 was not initialized! [14425.515230] uvcvideo 2-3.1:1.0: Entity type for entity Camera 1 was not initialized! [14425.515656] input: See3CAM_20CUG as /devices/3610000.xhci/usb2/2-3/2-3.1/2-3.1:1.0/input/input16 [14425.517543] hid-generic 0003:2560:C124.000C: hidraw3: USB HID v1.11 Device [e-con systems See3CAM_20CUG] on usb-3610000.xhci-3.1/input2 [14428.094847] usb 2-3.1: usb_suspend_both: status 0 [14428.150844] usb 2-3: usb_suspend_both: status 0 [14428.151004] usb usb2: usb_suspend_both: status 0 [17108.469925] sdhci-tegra 3400000.sdhci: Tuning done, restoring the best tap value : 58 [18156.170761] usb 2-3.1: usb_suspend_both: status 0 [18156.170781] usb 2-3.2: usb_suspend_both: status 0 [18156.462246] usb 2-3.1: USB disconnect, device number 12 [18156.970709] usb 2-3.4: usb_suspend_both: status 0 [18157.026700] usb 2-3: usb_suspend_both: status 0 [18157.026900] usb usb2: usb_suspend_both: status 0 [18157.259620] usb 2-3.2: USB disconnect, device number 8 [18157.390752] usb 2-3: usb_suspend_both: status 0 [18157.390954] usb usb2: usb_suspend_both: status 0 [18159.910882] usb 2-3.2: new SuperSpeed USB device number 13 using tegra-xusb [18159.931180] usb 2-3.2: LPM exit latency is zeroed, disabling LPM. [18159.931962] usb 2-3.2: New USB device found, idVendor=2560, idProduct=c124 [18159.931971] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [18159.932006] usb 2-3.2: Product: See3CAM_20CUG [18159.932012] usb 2-3.2: Manufacturer: e-con systems [18159.932018] usb 2-3.2: SerialNumber: 320F9904 [18159.933346] uvcvideo: Found UVC 1.00 device See3CAM_20CUG (2560:c124) [18159.934587] uvcvideo 2-3.2:1.0: Entity type for entity Extension 3 was not initialized! [18159.934893] uvcvideo 2-3.2:1.0: Entity type for entity Processing 2 was not initialized! [18159.935044] uvcvideo 2-3.2:1.0: Entity type for entity Camera 1 was not initialized! [18159.935552] input: See3CAM_20CUG as /devices/3610000.xhci/usb2/2-3/2-3.2/2-3.2:1.0/input/input17 [18159.937492] hid-generic 0003:2560:C124.000D: hidraw2: USB HID v1.11 Device [e-con systems See3CAM_20CUG] on usb-3610000.xhci-3.2/input2 [18161.582920] usb 2-3.1: new SuperSpeed USB device number 14 using tegra-xusb [18161.603195] usb 2-3.1: LPM exit latency is zeroed, disabling LPM. [18161.603948] usb 2-3.1: New USB device found, idVendor=2560, idProduct=c124 [18161.603956] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [18161.603963] usb 2-3.1: Product: See3CAM_20CUG [18161.603968] usb 2-3.1: Manufacturer: e-con systems [18161.603974] usb 2-3.1: SerialNumber: 32209904 [18161.605371] uvcvideo: Found UVC 1.00 device See3CAM_20CUG (2560:c124) [18161.606682] uvcvideo 2-3.1:1.0: Entity type for entity Extension 3 was not initialized! [18161.606869] uvcvideo 2-3.1:1.0: Entity type for entity Processing 2 was not initialized! [18161.607017] uvcvideo 2-3.1:1.0: Entity type for entity Camera 1 was not initialized! [18161.607553] input: See3CAM_20CUG as /devices/3610000.xhci/usb2/2-3/2-3.1/2-3.1:1.0/input/input18 [18161.610120] hid-generic 0003:2560:C124.000E: hidraw3: USB HID v1.11 Device [e-con systems See3CAM_20CUG] on usb-3610000.xhci-3.1/input2 [18162.058644] usb 2-3.2: usb_suspend_both: status 0 [18164.106618] usb 2-3.1: usb_suspend_both: status 0 [18164.162604] usb 2-3: usb_suspend_both: status 0 [18164.162769] usb usb2: usb_suspend_both: status 0 [19964.822852] uvcvideo: Failed to resubmit video URB (-1). [19966.074981] usb 2-3.1: usb_suspend_both: status 0 [19966.206988] usb 2-3.2: usb_suspend_both: status 0 [19966.939007] usb 2-3.4: usb_suspend_both: status 0 [19966.994966] usb 2-3: usb_suspend_both: status 0 [19966.995166] usb usb2: usb_suspend_both: status 0 [19980.879878] usb 2-3.1: USB disconnect, device number 14 [19980.938661] usb 2-3.2: USB disconnect, device number 13 [19981.194819] usb 2-3: usb_suspend_both: status 0 [19981.195019] usb usb2: usb_suspend_both: status 0 [19981.567699] usb 2-3.4: USB disconnect, device number 10 [19981.690870] usb 2-3: usb_suspend_both: status 0 [19981.691048] usb usb2: usb_suspend_both: status 0 [19983.519008] usb 2-3.2: new SuperSpeed USB device number 15 using tegra-xusb [19983.539304] usb 2-3.2: LPM exit latency is zeroed, disabling LPM. [19983.540051] usb 2-3.2: New USB device found, idVendor=2560, idProduct=c124 [19983.540060] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [19983.540067] usb 2-3.2: Product: See3CAM_20CUG [19983.540073] usb 2-3.2: Manufacturer: e-con systems [19983.540078] usb 2-3.2: SerialNumber: 3C2A9904 [19983.541305] uvcvideo: Found UVC 1.00 device See3CAM_20CUG (2560:c124) [19983.542489] uvcvideo 2-3.2:1.0: Entity type for entity Extension 3 was not initialized! [19983.542687] uvcvideo 2-3.2:1.0: Entity type for entity Processing 2 was not initialized! [19983.542918] uvcvideo 2-3.2:1.0: Entity type for entity Camera 1 was not initialized! [19983.546990] input: See3CAM_20CUG as /devices/3610000.xhci/usb2/2-3/2-3.2/2-3.2:1.0/input/input19 [19983.548762] hid-generic 0003:2560:C124.000F: hidraw2: USB HID v1.11 Device [e-con systems See3CAM_20CUG] on usb-3610000.xhci-3.2/input2 [19984.915024] usb 2-3.1: new SuperSpeed USB device number 16 using tegra-xusb [19984.935762] usb 2-3.1: LPM exit latency is zeroed, disabling LPM. [19984.936507] usb 2-3.1: New USB device found, idVendor=2560, idProduct=c124 [19984.936544] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [19984.936552] usb 2-3.1: Product: See3CAM_20CUG [19984.936558] usb 2-3.1: Manufacturer: e-con systems [19984.936564] usb 2-3.1: SerialNumber: 320F9904 [19984.941690] uvcvideo: Found UVC 1.00 device See3CAM_20CUG (2560:c124) [19984.942941] uvcvideo 2-3.1:1.0: Entity type for entity Extension 3 was not initialized! [19984.943136] uvcvideo 2-3.1:1.0: Entity type for entity Processing 2 was not initialized! [19984.943309] uvcvideo 2-3.1:1.0: Entity type for entity Camera 1 was not initialized! [19984.943771] input: See3CAM_20CUG as /devices/3610000.xhci/usb2/2-3/2-3.1/2-3.1:1.0/input/input20 [19984.945467] hid-generic 0003:2560:C124.0010: hidraw3: USB HID v1.11 Device [e-con systems See3CAM_20CUG] on usb-3610000.xhci-3.1/input2 [19986.046844] usb 2-3.2: usb_suspend_both: status 0 [19986.131006] usb 2-3.4: new SuperSpeed USB device number 17 using tegra-xusb [19986.151293] usb 2-3.4: LPM exit latency is zeroed, disabling LPM. [19986.152025] usb 2-3.4: New USB device found, idVendor=2560, idProduct=c124 [19986.152035] usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [19986.152043] usb 2-3.4: Product: See3CAM_20CUG [19986.152048] usb 2-3.4: Manufacturer: e-con systems [19986.152053] usb 2-3.4: SerialNumber: 32209904 [19986.153546] uvcvideo: Found UVC 1.00 device See3CAM_20CUG (2560:c124) [19986.155029] uvcvideo 2-3.4:1.0: Entity type for entity Extension 3 was not initialized! [19986.155218] uvcvideo 2-3.4:1.0: Entity type for entity Processing 2 was not initialized! [19986.155358] uvcvideo 2-3.4:1.0: Entity type for entity Camera 1 was not initialized! [19986.155908] input: See3CAM_20CUG as /devices/3610000.xhci/usb2/2-3/2-3.4/2-3.4:1.0/input/input21 [19986.157835] hid-generic 0003:2560:C124.0011: hidraw4: USB HID v1.11 Device [e-con systems See3CAM_20CUG] on usb-3610000.xhci-3.4/input2 [19987.014766] usb 2-3.1: usb_suspend_both: status 0 [19988.986765] usb 2-3.4: usb_suspend_both: status 0 [19989.042730] usb 2-3: usb_suspend_both: status 0 [19989.042900] usb usb2: usb_suspend_both: status 0 [20011.994495] usb 2-3.4: usb_suspend_both: status 0 [20326.930411] uvcvideo: Non-zero status (-71) in video completion handler. [20327.373251] uvcvideo: Non-zero status (-71) in video completion handler. [20327.376240] uvcvideo: Non-zero status (-71) in video completion handler. [20327.493246] uvcvideo: Non-zero status (-71) in video completion handler. [20327.555243] uvcvideo: Non-zero status (-71) in video completion handler. [20327.567230] uvcvideo: Non-zero status (-71) in video completion handler. [20328.719225] uvcvideo: Non-zero status (-71) in video completion handler. [20328.750225] uvcvideo: Non-zero status (-71) in video completion handler. [20328.862220] uvcvideo: Non-zero status (-71) in video completion handler. [20329.161209] uvcvideo: Non-zero status (-71) in video completion handler. [20329.329210] uvcvideo: Non-zero status (-71) in video completion handler. [20329.345207] uvcvideo: Non-zero status (-71) in video completion handler. [20329.356198] uvcvideo: Non-zero status (-71) in video completion handler. [20329.373197] uvcvideo: Non-zero status (-71) in video completion handler. [20332.675142] uvcvideo: Non-zero status (-71) in video completion handler. [20332.824139] uvcvideo: Non-zero status (-71) in video completion handler. [20332.896140] uvcvideo: Non-zero status (-71) in video completion handler. [20332.985136] uvcvideo: Non-zero status (-71) in video completion handler. [20333.031136] uvcvideo: Non-zero status (-71) in video completion handler. [20333.685128] uvcvideo: Non-zero status (-71) in video completion handler. [20333.983120] uvcvideo: Non-zero status (-71) in video completion handler. [20334.444111] uvcvideo: Non-zero status (-71) in video completion handler. [20334.851106] uvcvideo: Non-zero status (-71) in video completion handler. [20334.856098] uvcvideo: Non-zero status (-71) in video completion handler. [20335.930092] uvcvideo: Non-zero status (-71) in video completion handler. [20336.097078] uvcvideo: Non-zero status (-71) in video completion handler. [20336.686065] uvcvideo: Non-zero status (-71) in video completion handler. [20338.607031] uvcvideo: Non-zero status (-71) in video completion handler. [20338.682034] uvcvideo: Non-zero status (-71) in video completion handler. [20339.306022] uvcvideo: Non-zero status (-71) in video completion handler. [20339.798008] uvcvideo: Non-zero status (-71) in video completion handler. [20340.335999] uvcvideo: Non-zero status (-71) in video completion handler. [20340.705995] uvcvideo: Non-zero status (-71) in video completion handler. [20340.769988] uvcvideo: Non-zero status (-71) in video completion handler. [20340.873989] uvcvideo: Non-zero status (-71) in video completion handler. [20340.944985] uvcvideo: Non-zero status (-71) in video completion handler. [20341.023985] uvcvideo: Non-zero status (-71) in video completion handler. [20341.505982] uvcvideo: Non-zero status (-71) in video completion handler. [20342.484965] uvcvideo: Non-zero status (-71) in video completion handler. [20342.656953] uvcvideo: Non-zero status (-71) in video completion handler. [20343.057942] uvcvideo: Non-zero status (-71) in video completion handler. [20343.161959] uvcvideo: Non-zero status (-71) in video completion handler. [20343.222940] uvcvideo: Non-zero status (-71) in video completion handler. [20345.119912] uvcvideo: Non-zero status (-71) in video completion handler. [20345.535897] uvcvideo: Non-zero status (-71) in video completion handler. [20345.603890] uvcvideo: Non-zero status (-71) in video completion handler. [20345.634902] uvcvideo: Non-zero status (-71) in video completion handler. [20345.957890] uvcvideo: Non-zero status (-71) in video completion handler. [20345.989885] uvcvideo: Non-zero status (-71) in video completion handler. [20346.035888] uvcvideo: Non-zero status (-71) in video completion handler. [20346.438880] uvcvideo: Non-zero status (-71) in video completion handler. [20346.450877] uvcvideo: Non-zero status (-71) in video completion handler. [20346.886874] uvcvideo: Non-zero status (-71) in video completion handler. [20347.041871] uvcvideo: Non-zero status (-71) in video completion handler. [20347.073866] uvcvideo: Non-zero status (-71) in video completion handler. [20347.077860] uvcvideo: Non-zero status (-71) in video completion handler. [20347.108862] uvcvideo: Non-zero status (-71) in video completion handler. [23170.001457] usb 2-3.4: usb_suspend_both: status 0 [23171.929432] usb 2-3.2: usb_suspend_both: status 0