root@pesi-desktop:/home/pesi# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-2533) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Tue Nov 5 13:43:53 PST 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefb3000 s61592 r8192 d32616 u102400 [ 0.000000] pcpu-alloc: s61592 r8192 d32616 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29496(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3570364K/4159488K available (15230K kernel code, 2914K rwdata, 6628K rodata, 8576K init, 609K bss, 113988K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f60000 ( 15232 KB) [ 0.000000] .rodata : 0xffffff8008f60000 - 0xffffff80095e0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095e0000 - 0xffffff8009e40000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e40000 - 0xffffff800a118808 ( 2915 KB) [ 0.000000] .bss : 0xffffff800a118808 - 0xffffff800a1b0dbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001615] Console: colour dummy device 80x25 [ 0.001634] console [tty0] enabled [ 0.001650] kmemleak: Kernel memory leak detector disabled [ 0.001672] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001687] pid_max: default: 32768 minimum: 301 [ 0.002135] Security Framework initialized [ 0.002359] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002366] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003475] ftrace: allocating 46939 entries in 184 pages [ 0.172948] sched-energy: CPU device node has no sched-energy-costs [ 0.172982] ASID allocator initialised with 65536 entries [ 0.211917] tegra-id: chipid=22117. [ 0.211930] tegra-id: opt_subrevision=0. [ 0.211947] Tegra Speedo/IDDQ fuse revision 4 [ 0.211951] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.211956] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.211962] Tegra: CPU Speedo Value 2006, SoC Speedo Value 1887, GPU Speedo Value 1999 [ 0.211966] Tegra: CPU IDDQ Value 1620, SoC IDDQ Value 1716, GPU IDDQ Value 2085 [ 0.211985] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.212000] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.212008] DTB Build time: Mar 11 2020 14:14:00 [ 0.261048] CPU1: Booted secondary processor [411fd071] [ 0.292968] CPU2: Booted secondary processor [411fd071] [ 0.324937] CPU3: Booted secondary processor [411fd071] [ 0.325025] Brought up 4 CPUs [ 0.325033] SMP: Total of 4 processors activated. [ 0.325040] CPU features: detected feature: 32-bit EL0 Support [ 0.325302] CPU: All CPU(s) started at EL2 [ 0.325320] alternatives: patching kernel code [ 0.333484] devtmpfs: initialized [ 0.370897] Initilizing CustomIPI irq domain [ 0.371287] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.371307] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.381786] pinctrl core: initialized pinctrl subsystem [ 0.382447] OS set in device tree is not L4T. [ 0.382848] regulator-dummy: no parameters [ 0.383116] Initializing plugin-manager [ 0.383224] Plugin module not found [ 0.383454] node /plugin-manager/fragement@0 match with board >=3448-0002-100 [ 0.384000] node /plugin-manager/fragment@1 match with board >=3448-0002-101 [ 0.384502] node /plugin-manager/fragment@3 match with board >=3448-0002-100 [ 0.385255] node /plugin-manager/fragement@6 match with odm-data enable-tegra-wdt [ 0.385695] node /plugin-manager/fragement@8 match with odm-data enable-tegra-wdt [ 0.386311] node /plugin-manager/fragement@10 match with board >=3448-0002-300 [ 0.391550] NET: Registered protocol family 16 [ 0.392935] persistent_ram: found existing invalid buffer, size 0, start 8454144 [ 0.392987] pstore: using zlib compression [ 0.393029] console [pstore-1] enabled [ 0.393034] pstore: Registered ramoops as persistent store backend [ 0.393039] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.409005] cpuidle: using governor menu [ 0.413159] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.414723] vdso: 2 pages (1 code @ ffffff8008f67000, 1 data @ ffffff8009e44000) [ 0.414744] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.417431] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.419916] tegra_powergate_init: DONE [ 0.419932] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.419939] DTB Build time: Mar 11 2020 14:14:00 [ 0.421619] Tegra reboot handler registered. [ 0.426049] iommu: Adding device tegra-carveouts to group 0 [ 0.426162] platform tegra-carveouts: domain=ffffffc0f9b44a98 allocates as[0]=ffffffc0f94400a8 [ 0.426504] iommu: Adding device smmu_test to group 1 [ 0.426551] platform smmu_test: domain=ffffffc0f9b44cd8 allocates as[0]=ffffffc0f9440110 [ 0.427355] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.427407] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.427465] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.427474] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.427491] mc-err: mcerr ops are set to t21x [ 0.436646] iommu: Adding device 70090000.xusb to group 2 [ 0.436928] iommu: Adding device 70006000.serial to group 3 [ 0.437015] platform 70006000.serial: domain=ffffffc0f94b03d8 allocates as[0]=ffffffc0f9440178 [ 0.437440] iommu: Adding device 70006040.serial to group 4 [ 0.437694] iommu: Adding device 70006200.serial to group 5 [ 0.437879] iommu: Adding device sound to group 6 [ 0.437940] platform sound: domain=ffffffc0f94b0918 allocates as[0]=ffffffc0f94401e0 [ 0.438477] iommu: Adding device 7000d400.spi to group 7 [ 0.438732] iommu: Adding device 7000d600.spi to group 8 [ 0.439036] iommu: Adding device 50000000.host1x to group 9 [ 0.439311] iommu: Adding device 54080000.vi to group 10 [ 0.439703] iommu: Adding device 54600000.isp to group 11 [ 0.439956] iommu: Adding device 54680000.isp to group 12 [ 0.440227] iommu: Adding device tegradc.0 to group 13 [ 0.440277] platform tegradc.0: domain=ffffffc0f94bb6d8 allocates as[0]=ffffffc0f9440248 [ 0.440797] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.441176] iommu: Adding device tegradc.1 to group 14 [ 0.441225] platform tegradc.1: domain=ffffffc0f94bb918 allocates as[0]=ffffffc0f94402b0 [ 0.441733] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.441973] iommu: Adding device 54340000.vic to group 15 [ 0.442174] iommu: Adding device 544c0000.nvenc to group 16 [ 0.442358] iommu: Adding device 54500000.tsec to group 17 [ 0.442547] iommu: Adding device 54100000.tsecb to group 18 [ 0.442739] iommu: Adding device 54480000.nvdec to group 19 [ 0.442923] iommu: Adding device 54380000.nvjpg to group 20 [ 0.443943] iommu: Adding device 546c0000.i2c to group 21 [ 0.444298] iommu: Adding device 57000000.gpu to group 22 [ 0.444353] platform 57000000.gpu: domain=ffffffc0f94c7918 allocates as[0]=ffffffc0f9440318 [ 0.444391] platform 57000000.gpu: domain=ffffffc0f94c7918 allocates as[1]=ffffffc0f9440380 [ 0.444433] platform 57000000.gpu: domain=ffffffc0f94c7918 allocates as[2]=ffffffc0f94403e8 [ 0.444467] platform 57000000.gpu: domain=ffffffc0f94c7918 allocates as[3]=ffffffc0f9440450 [ 0.445381] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.445392] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.445404] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.445407] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.445412] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.497141] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.497150] tegra-pmc: Clear bootloader IO dpd settings [ 0.497170] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.497236] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.497523] iommu: Adding device 70012000.se to group 23 [ 0.498260] iommu: Adding device 7000c000.i2c to group 24 [ 0.498512] iommu: Adding device 7000c400.i2c to group 25 [ 0.498755] iommu: Adding device 7000c500.i2c to group 26 [ 0.499010] iommu: Adding device 7000c700.i2c to group 27 [ 0.499255] iommu: Adding device 7000d000.i2c to group 28 [ 0.499509] iommu: Adding device 7000d100.i2c to group 29 [ 0.499799] iommu: Adding device sdhci-tegra.3 to group 30 [ 0.499854] platform sdhci-tegra.3: domain=ffffffc0f9565a98 allocates as[0]=ffffffc0f94404b8 [ 0.500277] iommu: Adding device sdhci-tegra.2 to group 31 [ 0.500325] platform sdhci-tegra.2: domain=ffffffc0f9565cd8 allocates as[0]=ffffffc0f9440520 [ 0.501179] iommu: Adding device 700d0000.xudc to group 32 [ 0.504448] vdd-ac-bat: 5000 mV [ 0.504795] vdd-5v0-sys: 5000 mV [ 0.505770] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.505810] vdd-5v0-hdmi: 5000 mV [ 0.506194] vdd-1v8-sys: 1800 mV [ 0.506586] vdd-fan: supplied by vdd-5v0-sys [ 0.506620] vdd-fan: 5000 mV [ 0.507004] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.507060] vdd-usb-vbus: 5000 mV [ 0.507580] vdd-usb-vbus2: 5000 mV [ 0.538105] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.540563] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.541680] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.541698] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.541734] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.542095] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.549820] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.550165] SCSI subsystem initialized [ 0.550395] libata version 3.00 loaded. [ 0.550676] usbcore: registered new interface driver usbfs [ 0.550728] usbcore: registered new interface driver hub [ 0.550798] usbcore: registered new device driver usb [ 0.554583] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.560316] vdd-core: 600 <--> 1162 mV at 1125 mV [ 0.561125] random: fast init done [ 0.561229] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.564240] vdd-ddr-1v1: 1150 mV [ 0.568236] vdd-pre-reg-1v35: 1350 mV [ 0.572242] vdd-1v8: 1800 mV [ 0.576234] avdd-sys-1v2: 1200 mV [ 0.580237] vdd-pex-1v0: 1050 mV [ 0.580790] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.581268] max77620-ldo3: at 3100 mV [ 0.584237] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.584723] max77620-ldo5: at 3100 mV [ 0.588241] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.592234] avdd-1v05-pll: 1050 mV [ 0.596237] avdd-io-hdmi-dp: 1050 mV [ 0.597410] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.597677] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.599033] max77620 4-003c: max77620 probe successful [ 0.601703] media: Linux media interface: v0.10 [ 0.601761] Linux video capture interface: v2.00 [ 0.602626] pps_core: LinuxPPS API ver. 1 registered [ 0.602630] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.602649] PTP clock support registered [ 0.606431] tegra_fiq_debugger_init: found FIQ source (IRQ 98) [ 0.612693] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.613551] Advanced Linux Sound Architecture Driver Initialized. [ 0.614183] Bluetooth: Core ver 2.22 [ 0.614230] NET: Registered protocol family 31 [ 0.614233] Bluetooth: HCI device and connection manager initialized [ 0.614248] Bluetooth: HCI socket layer initialized [ 0.614256] Bluetooth: L2CAP socket layer initialized [ 0.614281] Bluetooth: SCO socket layer initialized [ 0.615990] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.616007] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.616052] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.616065] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.619155] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.620134] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.620189] vdd-3v3-sys: 3300 mV [ 0.620473] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.625071] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.625538] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.625574] vdd-3v3-sd: 3300 mV [ 0.626440] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.626486] avdd-io-edp-1v05: 1050 mV [ 0.626940] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.627003] vdd-usb-hub-en: 5000 mV [ 0.628397] camchar: rtcpu character device driver loaded [ 0.629163] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.630451] clocksource: Switched to clocksource arch_sys_counter [ 0.670389] VFS: Disk quotas dquot_6.6.0 [ 0.670568] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.671058] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.671432] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.671449] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.671706] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.671712] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.671723] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.671758] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.671764] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.671777] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.671786] nvmap_page_pool_init: Total RAM pages: 1011375 [ 0.671790] nvmap_page_pool_init: nvmap page pool size: 126421 pages (493 MB) [ 0.671873] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.672341] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.673148] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.681327] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.681729] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.681966] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.682172] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.682347] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.682654] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.682660] pre_t19x_iso_plat_init(): max_iso_bw=33280000KB [ 0.683093] NET: Registered protocol family 2 [ 0.684062] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.684274] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.684769] TCP: Hash tables configured (established 32768 bind 32768) [ 0.684915] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.684997] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.685417] NET: Registered protocol family 1 [ 0.686152] RPC: Registered named UNIX socket transport module. [ 0.686157] RPC: Registered udp transport module. [ 0.686161] RPC: Registered tcp transport module. [ 0.686165] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.686179] PCI: CLS 0 bytes, default 64 [ 0.686427] Trying to unpack rootfs image as initramfs... [ 0.934403] Freeing initrd memory: 5428K [ 0.944171] host1x 50000000.host1x: initialized [ 0.945960] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.949186] audit: initializing netlink subsys (disabled) [ 0.949284] audit: type=2000 audit(0.795:1): initialized [ 0.950047] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.960060] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.961547] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.962340] 9p: Installing v9fs 9p2000 file system support [ 0.965641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.965780] io scheduler noop registered [ 0.966072] io scheduler cfq registered (default) [ 0.968803] gic 702f9000.agic: GIC IRQ controller registered [ 0.971634] iommu: Adding device 702ef000.adsp to group 33 [ 0.978569] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 0.978727] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.979301] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x71e8c0f [ 0.979310] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.980902] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.981011] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.981110] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.981303] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 0.981389] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 0.981481] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 0.981566] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 0.981655] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 0.981740] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 0.981832] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 0.987223] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.988938] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.990845] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.992120] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.992480] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.993698] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.993923] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.994153] Adding domain tsec-pd to PM domain host1x-pd [ 0.996303] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 0.997171] tsec 54500000.tsec: initialized [ 0.998721] tsec 54100000.tsecb: initialized [ 0.999420] Adding domain nvdec-pd to PM domain host1x-pd [ 1.002813] nvdec 54480000.nvdec: initialized [ 1.003841] Adding domain vic03-pd to PM domain host1x-pd [ 1.004019] Adding domain msenc-pd to PM domain host1x-pd [ 1.004181] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.008030] falcon 54340000.vic: initialized [ 1.009244] falcon 544c0000.nvenc: initialized [ 1.010607] falcon 54380000.nvjpg: initialized [ 1.015082] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.015213] display board info: id 0x0, fab 0x0 [ 1.015277] generic_infoframe_type: 0x87 [ 1.015411] tegradc tegradc.0: DT parsed successfully [ 1.015457] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0 [ 1.018592] tegradc tegradc.0: probed [ 1.022888] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.027130] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 10 channels [ 1.027933] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.028256] kfuse 7000fc00.kfuse: initialized [ 1.029630] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.030672] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.032007] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.032027] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.032483] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.033793] vdd-gpu: applied init 1000000uV constraint [ 1.033800] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.034162] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.038637] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.038797] No Device Node present for smmu client: serial8250 !! [ 1.038813] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.038884] iommu: Adding device serial8250 to group 35 [ 1.041453] console [ttyS0] disabled [ 1.041522] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.041615] console [ttyS0] enabled [ 1.042525] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.042806] serial-tegra 70006200.serial: RX in PIO mode [ 1.042901] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.044010] [drm] Initialized [ 1.044810] Console: switching to colour frame buffer device 80x30 [ 1.044847] tegradc tegradc.0: fb registered [ 1.046361] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.046639] tegradc tegradc.1: No lt-data, using default setting [ 1.046670] tegradc tegradc.1: No hpd-gpio in DT [ 1.046705] tegradc tegradc.1: DT parsed successfully [ 1.046756] tegradc tegradc.1: Display dc.ffffff800d4c0000 registered with id=1 [ 1.048461] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.055038] brd: module loaded [ 1.559808] Host read timeout at address 545c00c4 [ 1.561763] tegradc tegradc.1: probed [ 1.567491] loop: module loaded [ 1.567639] tegra_profiler: version: 1.134, samples/io: 47/26 [ 1.567809] tegra_profiler: auth: init [ 1.570107] THERMAL EST: found 2 subdevs [ 1.570122] THERMAL EST num_resources: 0 [ 1.570129] [THERMAL EST subdev 0] [ 1.570137] [THERMAL EST subdev 1] [ 1.570848] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.570857] THERMAL EST: thz register success. [ 1.571183] THERMAL EST: end of probe, return err: 0 [ 1.573024] hisi_sas: driver version v1.6 [ 1.583525] libphy: Fixed MDIO Bus: probed [ 1.584130] tun: Universal TUN/TAP device driver, 1.6 [ 1.584134] tun: (C) 1999-2004 Max Krasnyansky [ 1.585161] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.585169] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.585239] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.585244] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.585295] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.585298] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.585347] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.585352] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.586254] tegradc tegradc.1: fb registered [ 1.586683] PPP generic driver version 2.4.2 [ 1.586872] PPP BSD Compression module registered [ 1.586879] PPP Deflate Compression module registered [ 1.586918] PPP MPPE Compression module registered [ 1.586925] NET: Registered protocol family 24 [ 1.587001] usbcore: registered new interface driver r8152 [ 1.587052] usbcore: registered new interface driver asix [ 1.587108] usbcore: registered new interface driver ax88179_178a [ 1.587145] usbcore: registered new interface driver cdc_ether [ 1.587179] usbcore: registered new interface driver net1080 [ 1.587210] usbcore: registered new interface driver cdc_subset [ 1.587245] usbcore: registered new interface driver zaurus [ 1.587304] usbcore: registered new interface driver cdc_ncm [ 1.587472] VFIO - User Level meta-driver version: 0.3 [ 1.588842] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.588868] ehci-pci: EHCI PCI platform driver [ 1.588913] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.588925] ohci-pci: OHCI PCI platform driver [ 1.588970] ohci-platform: OHCI generic platform driver [ 1.590190] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 2 [ 1.591664] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 1 [ 1.591816] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.592410] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.593120] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 0 [ 1.593593] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f9707c00 id [ 1.594612] tegradc tegradc.1: dp: aux write got error (0x10000100) [ 1.594796] usbcore: registered new interface driver uas [ 1.594858] usbcore: registered new interface driver usb-storage [ 1.594977] usbcore: registered new interface driver usbserial [ 1.597994] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.599654] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.599669] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.600194] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.600494] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.600665] mousedev: PS/2 mouse device common for all mice [ 1.600766] usbcore: registered new interface driver xpad [ 1.600955] tegradc tegradc.1: dp: Failed for I2C write addr:80, size:1, stat:0x10000100 [ 1.601161] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-05-08 09:42:10 UTC, Version: 50.22 release [ 1.601221] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.601250] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.602167] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.602214] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.602579] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.602585] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.602590] usb usb1: Product: xHCI Host Controller [ 1.602593] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.602597] usb usb1: SerialNumber: 70090000.xusb [ 1.603164] hub 1-0:1.0: USB hub found [ 1.603205] hub 1-0:1.0: 5 ports detected [ 1.603766] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.603776] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.603923] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.604036] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.604040] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.604044] usb usb2: Product: xHCI Host Controller [ 1.604047] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.604051] usb usb2: SerialNumber: 70090000.xusb [ 1.604501] hub 2-0:1.0: USB hub found [ 1.604568] hub 2-0:1.0: 4 ports detected [ 1.616527] tegradc tegradc.1: nominal-pclk:25200000 parent:25200000 div:1.0 pclk:25200000 24948000~27468000 [ 1.617264] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 2 [ 1.618700] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 1 [ 1.620155] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 0 [ 1.621604] tegradc tegradc.1: dp: aux write got error (0x10000100) [ 1.627905] tegradc tegradc.1: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.636823] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 2 [ 1.638273] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 1 [ 1.639724] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 0 [ 1.641172] tegradc tegradc.1: dp: aux write got error (0x10000100) [ 1.647460] tegradc tegradc.1: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.656379] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 2 [ 1.657828] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 1 [ 1.659089] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 0 [ 1.660538] tegradc tegradc.1: dp: aux write got error (0x10000100) [ 1.666814] tegradc tegradc.1: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.675734] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 2 [ 1.677192] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 1 [ 1.678654] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 0 [ 1.680113] tegradc tegradc.1: dp: aux write got error (0x10000100) [ 1.686389] tegradc tegradc.1: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.694657] tegradc tegradc.1: dp: failed to exit panel power save mode (0xfffffff2) [ 1.702528] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.702546] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 1.702554] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 1.731733] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.734286] rtc rtc1: alarm rtc device [ 1.734307] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.734362] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.734952] i2c /dev entries driver [ 1.737049] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.739456] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.739464] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.739956] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.739975] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.739985] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.740120] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.740130] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.740138] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.740283] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.740294] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.740300] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.740473] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.741265] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.741318] tegra_aotag tegra-aotag: Invalid temp readout [ 1.741347] tegra_aotag tegra-aotag: Invalid temp readout [ 1.741365] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.741374] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.742274] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.742298] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.742538] tegra_aotag tegra-aotag: Invalid temp readout [ 1.742568] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.742995] parse_throttle_dt_data: Num cap clks = 6 [ 1.743002] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.743017] parse_throttle_dt_data: clk=gpu type=4 [ 1.743047] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.743069] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.743091] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.743096] parse_throttle_dt_data: clk=emc type=3 [ 1.743458] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.743570] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.743713] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.744488] FAN dev name: pwm-fan [ 1.744548] FAN:gpio request success. [ 1.744617] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.744917] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.745110] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.745121] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.745219] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.745225] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.745230] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.745235] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.745240] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.745245] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.745250] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.745255] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.745260] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.745265] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.745918] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds. [ 1.746269] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1) [ 1.747209] device-mapper: uevent: version 1.0.3 [ 1.747672] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.753207] tegra210-cpufreq cpufreq: probe()...completed [ 1.753898] sdhci: Secure Digital Host Controller Interface driver [ 1.753900] sdhci: Copyright(c) Pierre Ossman [ 1.753902] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.754258] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 1.755731] sdhci-tegra sdhci-tegra.2: Got CD GPIO [ 1.756102] sdhci-tegra sdhci-tegra.2: Client registration for eMC Successful [ 1.756220] sdhci-tegra sdhci-tegra.2: wakeup init done, cdirq 163 [ 1.758870] tegra-se 70012000.se: tegra_se_probe: complete [ 1.759398] hidraw: raw HID events driver (C) Jiri Kosina [ 1.762062] usbcore: registered new interface driver usbhid [ 1.762065] usbhid: USB HID core driver [ 1.764285] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.764567] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.766180] nvpmodel: initialized successfully [ 1.767216] usbcore: registered new interface driver snd-usb-audio [ 1.767272] No Device Node present for smmu client: snd-soc-dummy !! [ 1.767277] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.767295] iommu: Adding device snd-soc-dummy to group 36 [ 1.774505] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.795626] OPE platform probe [ 1.795717] OPE platform probe successful [ 1.796075] OPE platform probe [ 1.796158] OPE platform probe successful [ 1.802461] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 1.807659] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA 64-bit with 64 bit addr [ 1.813043] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 1.813049] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 1.822460] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 1.823109] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 2 [ 1.824632] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 1 [ 1.826071] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 0 [ 1.827511] tegradc tegradc.1: dp: aux write got error (0x10000100) [ 1.833790] tegradc tegradc.1: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.842674] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 2 [ 1.844361] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 1 [ 1.846865] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 0 [ 1.848305] tegradc tegradc.1: dp: aux write got error (0x10000100) [ 1.854622] tegradc tegradc.1: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.863764] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 2 [ 1.868749] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 1 [ 1.870192] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 0 [ 1.871529] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.871640] tegradc tegradc.1: dp: aux write got error (0x10000100) [ 1.877913] tegradc tegradc.1: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.886278] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.886415] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.886684] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.886816] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.886871] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 2 [ 1.888132] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.888264] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.888413] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.889505] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 1 [ 1.889693] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.889824] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.893337] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.893754] tegradc tegradc.1: dp: aux write retry (0x10000100) -- 0 [ 1.893769] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.893898] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.894975] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 1.895089] tegradc tegradc.1: dp: aux write got error (0x10000100) [ 1.901366] tegradc tegradc.1: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.910888] tegradc tegradc.1: dp: failed to exit panel power save mode (0xfffffff2) [ 1.918640] hpd: edid read prepare failed [ 1.920341] u32 classifier [ 1.920342] Actions configured [ 1.920415] Initializing XFRM netlink socket [ 1.921146] NET: Registered protocol family 10 [ 1.921814] NET: Registered protocol family 17 [ 1.921825] NET: Registered protocol family 15 [ 1.921900] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.921948] Bluetooth: RFCOMM socket layer initialized [ 1.921957] Bluetooth: RFCOMM ver 1.11 [ 1.921961] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.921965] Bluetooth: HIDP socket layer initialized [ 1.921984] 9pnet: Installing 9P2000 support [ 1.922020] Key type dns_resolver registered [ 1.922472] Registered cp15_barrier emulation handler [ 1.922485] hpd: DC from connected to disconnected [ 1.922533] Registered setend emulation handler [ 1.926205] registered taskstats version 1 [ 1.926480] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.926781] Adding domain ve2-pd to PM domain host1x-pd [ 1.927073] Adding domain ve-pd to PM domain host1x-pd [ 1.929119] isp 54600000.isp: initialized [ 1.930114] isp 54680000.isp: initialized [ 1.931618] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.940440] last reset is due to power on reset [ 1.940444] KERNEL: PMC reset status reg: 0x0 [ 1.940522] BL: PMC reset status reg: 0x0 [ 1.940524] BL: PMIC poweroff Event Recorder: 0x50 [ 1.941931] clk_cbus_recalc_rate: no gbus parent [ 1.941937] clk_cbus_round_rate: no gbus parent [ 1.941939] clk_cbus_round_rate: no gbus parent [ 1.941947] clk_cbus_recalc_rate: no gbus parent [ 1.942050] clk_cbus_recalc_rate: no gbus parent [ 1.942053] clk_cbus_round_rate: no gbus parent [ 1.942056] clk_cbus_round_rate: no gbus parent [ 1.942060] clk_cbus_recalc_rate: no gbus parent [ 1.942748] tegra_dvfs: GPU-cap: registered [ 1.942802] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.942805] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled [ 1.942807] tegra dvfs: vdd-gpu: nominal 1078mV, offset 708000uV, step 10000uV, scaling enabled [ 1.944187] tegra_dvfs: vdd-gpu-vts: registered [ 1.944881] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.945474] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.946050] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.951234] usb 1-2: New USB device found, idVendor=0bda, idProduct=818b [ 1.951238] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.951241] usb 1-2: Product: 802.11n NIC [ 1.951244] usb 1-2: Manufacturer: Realtek [ 1.951246] usb 1-2: SerialNumber: 6CE8C607006F [ 1.957377] mmc1: new high speed SDHC card at address 0001 [ 1.957649] mmcblk1: mmc1:0001 JB1RT 29.8 GiB [ 1.958682] mmcblk1: p1 [ 1.979163] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:14 UTC (946688414) [ 1.980156] vi 54080000.vi: vi_probe: ++ [ 1.983016] vi 54080000.vi: initialized [ 1.985078] vi 54080000.vi: subdev nvcsi--2 bound [ 1.985180] vi 54080000.vi: subdev nvcsi--1 bound [ 1.985426] mmcblk mmc0:0001: Card claimed for testing. [ 1.985436] mmcblk mmc1:0001: Card claimed for testing. [ 1.986743] Disable partitions left on by BL [ 1.986747] disb [ 1.986793] bwmgr: missing cdev-type property [ 1.986921] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.986928] DRAM derating cdev registered. [ 1.987948] vdd-fan: disabling [ 1.987951] vdd-usb-vbus: disabling [ 1.987953] vdd-usb-vbus2: disabling [ 1.987961] vddio-sdmmc-ap: disabling [ 1.988051] vdd-3v3-sd: disabling [ 1.988056] vdd-usb-hub-en: disabling [ 1.988144] ALSA device list: [ 1.988147] #0: tegra-hda at 0x70038000 irq 82 [ 1.988150] #1: tegra-snd-t210ref-mobile-rt565x [ 1.991193] Freeing unused kernel memory: 8576K [ 2.009307] L4T-INITRD Build DATE: Sat Jan 1 01:00:14 UTC 2000 [ 2.013685] Root device found: mmcblk0p1 [ 2.014800] Found dev node: /dev/mmcblk0p1 [ 2.178299] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted [ 2.178303] EXT4-fs (mmcblk0p1): recovery complete [ 2.184431] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.185222] Rootfs mounted over mmcblk0p1 [ 2.197603] Switching from initrd to actual rootfs [ 2.269770] systemd[1]: System time before build time, advancing clock. [ 2.284623] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.296079] cgroup: cgroup2: unknown option "nsdelegate" [ 2.306876] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.307608] systemd[1]: Detected architecture arm64. [ 2.331847] systemd[1]: Set hostname to . [ 2.342469] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.392316] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.392327] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.486212] random: systemd: uninitialized urandom read (16 bytes read) [ 2.486244] systemd[1]: Reached target User and Group Name Lookups. [ 2.486866] random: systemd: uninitialized urandom read (16 bytes read) [ 2.487218] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.487354] random: systemd: uninitialized urandom read (16 bytes read) [ 2.489942] systemd[1]: Created slice System Slice. [ 2.490243] systemd[1]: Listening on Journal Socket. [ 2.493402] systemd[1]: Starting Load Kernel Modules... [ 2.568072] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.622554] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 2.752066] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.754092] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.797427] systemd-journald[1941]: Received request to flush runtime journal from PID 1 [ 2.857854] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.857862] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.857867] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.857871] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.857875] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.857897] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.857963] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.858155] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.858272] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.858297] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.858327] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 2.858347] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.858558] pci 0000:01:00.0: supports D1 D2 [ 2.858562] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.870512] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.870545] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 2.870550] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.870557] pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 2.870576] pci 0000:01:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref] [ 2.870593] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.870601] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.870605] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.870612] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 2.870885] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.870889] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.870894] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.870991] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.871169] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.871186] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.894338] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.894450] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e9:d4:1b from device tree [ 2.894936] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.894952] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.935223] tegradc tegradc.1: blank - powerdown [ 2.935236] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 2.935239] Extcon DP: HPD disabled [ 2.935242] hpd: hpd_switch 0 [ 2.935245] hpd: switching from state 2 (Check EDID) to state 3 (Disabled) [ 3.560074] using random self ethernet address [ 3.574523] using random host ethernet address [ 3.620531] Mass Storage Function, version: 2009/09/11 [ 3.620538] LUN: removable file: (no medium) [ 3.643263] using random self ethernet address [ 3.670971] using random host ethernet address [ 3.753804] rndis0: HOST MAC b6:17:91:21:c6:24 [ 3.753893] rndis0: MAC b6:17:91:21:c6:25 [ 3.759162] usb0: HOST MAC b6:17:91:21:c6:26 [ 3.759194] usb0: MAC b6:17:91:21:c6:27 [ 3.759215] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 3.760157] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 3.760171] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 3.764334] tegra-xudc-new 700d0000.xudc: entering ELPG [ 3.764594] l4tbr0: port 1(rndis0) entered blocking state [ 3.764596] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 3.764600] l4tbr0: port 1(rndis0) entered disabled state [ 3.764772] device rndis0 entered promiscuous mode [ 3.797785] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 3.806522] l4tbr0: port 2(usb0) entered blocking state [ 3.806527] l4tbr0: port 2(usb0) entered disabled state [ 3.806696] device usb0 entered promiscuous mode [ 3.812571] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 4.078547] random: crng init done [ 4.081954] random: 7 urandom warning(s) missed due to ratelimiting [ 4.268146] zram: Added device: zram0 [ 4.272302] zram: Added device: zram1 [ 4.274627] zram: Added device: zram2 [ 4.278161] zram: Added device: zram3 [ 4.320048] zram0: detected capacity change from 0 to 519618560 [ 4.438003] Adding 507436k swap on /dev/zram0. Priority:5 extents:1 across:507436k SS [ 4.443955] zram1: detected capacity change from 0 to 519618560 [ 4.522218] Adding 507436k swap on /dev/zram1. Priority:5 extents:1 across:507436k SS [ 4.548656] zram2: detected capacity change from 0 to 519618560 [ 4.560972] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.562147] eth0: 0xffffff800abba000, 00:04:4b:e9:d4:1b, IRQ 405 [ 4.577302] Adding 507436k swap on /dev/zram2. Priority:5 extents:1 across:507436k SS [ 4.606753] zram3: detected capacity change from 0 to 519618560 [ 4.622960] Adding 507436k swap on /dev/zram3. Priority:5 extents:1 across:507436k SS [ 4.719906] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.520941] tegradc tegradc.0: blank - powerdown [ 5.520951] tegradc tegradc.1: blank - powerdown [ 5.768118] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 5.768124] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 5.870915] usb usb2: usb_suspend_both: status 0 [ 6.069957] usb 1-2: This Realtek USB WiFi dongle (0x0bda:0x818b) is untested! [ 6.069965] usb 1-2: Please report results to Jes.Sorensen@gmail.com [ 6.146112] fuse init (API version 7.26) [ 6.305921] usb 1-2: Vendor: Realtek [ 6.305926] usb 1-2: Product: 802.11n NIC [ 6.305930] usb 1-2: Serial: \xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff [ 6.305934] usb 1-2: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes): [ 6.305938] usb 1-2: 00: 29 81 00 7c 01 40 03 00 [ 6.305942] usb 1-2: 08: 70 34 04 50 14 00 00 00 [ 6.305945] usb 1-2: 10: 28 28 28 28 28 28 28 28 [ 6.305949] usb 1-2: 18: 28 28 28 01 ef ef ff ff [ 6.305952] usb 1-2: 20: ff ff ff ff ff ff ff ff [ 6.305954] usb 1-2: 28: ff ff ff ff ff ff ff ff [ 6.305957] usb 1-2: 30: ff ff ff ff ff ff ff ff [ 6.305960] usb 1-2: 38: ff ff 26 26 26 26 26 26 [ 6.305963] usb 1-2: 40: 26 26 26 26 26 01 ef ef [ 6.305966] usb 1-2: 48: ff ff ff ff ff ff ff ff [ 6.305969] usb 1-2: 50: ff ff ff ff ff ff ff ff [ 6.305972] usb 1-2: 58: ff ff ff ff ff ff ff ff [ 6.305974] usb 1-2: 60: ff ff ff ff ff ff ff ff [ 6.305977] usb 1-2: 68: ff ff ff ff ff ff ff ff [ 6.305980] usb 1-2: 70: ff ff ff ff ff ff ff ff [ 6.305983] usb 1-2: 78: ff ff ff ff ff ff ff ff [ 6.305985] usb 1-2: 80: ff ff ff ff ff ff ff ff [ 6.305988] usb 1-2: 88: ff ff ff ff ff ff ff ff [ 6.305991] usb 1-2: 90: ff ff ff ff ff ff ff ff [ 6.305993] usb 1-2: 98: ff ff ff ff ff ff ff ff [ 6.305996] usb 1-2: a0: ff ff ff ff ff ff ff ff [ 6.305999] usb 1-2: a8: ff ff ff ff ff ff ff ff [ 6.306002] usb 1-2: b0: ff ff ff ff ff ff ff ff [ 6.306004] usb 1-2: b8: 20 2d 1c 00 00 00 ff ff [ 6.306007] usb 1-2: c0: ff 01 00 10 00 00 00 ff [ 6.306010] usb 1-2: c8: 00 00 ff ff ff ff ff ff [ 6.306013] usb 1-2: d0: da 0b 8b 81 e6 47 02 6c [ 6.306016] usb 1-2: d8: e8 c6 07 00 6f 09 03 52 [ 6.306019] usb 1-2: e0: 65 61 6c 74 65 6b 0d 03 [ 6.306022] usb 1-2: e8: 38 30 32 2e 31 31 6e 20 [ 6.306024] usb 1-2: f0: 4e 49 43 00 ff ff ff ff [ 6.306027] usb 1-2: f8: ff ff ff ff ff ff ff ff [ 6.306030] usb 1-2: 100: ff ff ff ff ff ff ff ff [ 6.306033] usb 1-2: 108: ff ff ff ff ff ff ff ff [ 6.306036] usb 1-2: 110: ff ff ff ff ff ff ff 0d [ 6.306039] usb 1-2: 118: 03 00 05 00 30 00 00 00 [ 6.306042] usb 1-2: 120: 00 93 ff ff ff ff ff ff [ 6.306045] usb 1-2: 128: ff ff ff ff ff ff ff ff [ 6.306048] usb 1-2: 130: f6 a8 98 2d 03 92 98 00 [ 6.306051] usb 1-2: 138: fc 8c 00 11 9b 44 02 0a [ 6.306054] usb 1-2: 140: ff ff ff ff ff ff ff ff [ 6.306057] usb 1-2: 148: ff ff ff ff ff ff ff ff [ 6.306059] usb 1-2: 150: ff ff ff ff ff ff ff ff [ 6.306062] usb 1-2: 158: ff ff ff ff ff ff ff ff [ 6.306065] usb 1-2: 160: ff ff ff ff ff ff ff ff [ 6.306068] usb 1-2: 168: ff ff ff ff ff ff ff ff [ 6.306070] usb 1-2: 170: ff ff ff ff ff ff ff ff [ 6.306073] usb 1-2: 178: ff ff ff ff ff ff ff ff [ 6.306076] usb 1-2: 180: ff ff ff ff ff ff ff ff [ 6.306079] usb 1-2: 188: ff ff ff ff ff ff ff ff [ 6.306082] usb 1-2: 190: ff ff ff ff ff ff ff ff [ 6.306085] usb 1-2: 198: ff ff ff ff ff ff ff ff [ 6.306087] usb 1-2: 1a0: ff ff ff ff ff ff ff ff [ 6.306090] usb 1-2: 1a8: ff ff ff ff ff ff ff ff [ 6.306093] usb 1-2: 1b0: ff ff ff ff ff ff ff ff [ 6.306096] usb 1-2: 1b8: ff ff ff ff ff ff ff ff [ 6.306099] usb 1-2: 1c0: ff ff ff ff ff ff ff ff [ 6.306101] usb 1-2: 1c8: ff ff ff ff ff ff ff ff [ 6.306104] usb 1-2: 1d0: ff ff ff ff ff ff ff ff [ 6.306107] usb 1-2: 1d8: ff ff ff ff ff ff ff ff [ 6.306110] usb 1-2: 1e0: ff ff ff ff ff ff ff ff [ 6.306112] usb 1-2: 1e8: ff ff ff ff ff ff ff ff [ 6.306115] usb 1-2: 1f0: ff ff ff ff ff ff ff ff [ 6.306118] usb 1-2: 1f8: ff ff ff ff ff ff ff ff [ 6.306124] usb 1-2: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 [ 6.306128] usb 1-2: RTL8192EU MAC: 6c:e8:c6:07:00:6f [ 6.306132] usb 1-2: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin [ 6.308159] usb 1-2: Firmware revision 19.0 (signature 0x92e1) [ 7.231301] usb 1-2: rtl8192eu_rx_iqk_path_a: Path A RX IQK failed! [ 7.264813] usb 1-2: rtl8192eu_rx_iqk_path_a: Path A RX IQK failed! [ 7.388076] usbcore: registered new interface driver rtl8xxxu [ 7.438800] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.450976] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.520290] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready root@pesi-desktop:/home/pesi#