[0000.311] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 1 from HW fuses. [0000.320] I> MB1 (prd-version: 1.5.1.2-t194-41334769-9ec1833d) [0000.325] I> Boot-mode: Coldboot [0000.328] I> Chip revision : A02 [0000.331] I> Bootrom patch version : 7 (correctly patched) [0000.336] I> ATE fuse revision : 0x200 [0000.340] I> Ram repair fuse : 0x0 [0000.343] I> Ram Code : 0x0 [0000.345] I> rst_source : 0x0 [0000.348] I> rst_level : 0x0 [0000.352] I> Boot-device: eMMC [0000.367] I> sdmmc DDR50 mode [0000.371] W> No valid slot number is found in scratch register [0000.376] W> Return default slot: _a [0000.380] I> Active Boot chain : 0 [0000.383] I> Boot-device: eMMC [0000.386] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.394] I> Temperature = 21000 [0000.397] W> Skipping boost for clk: BPMP_CPU_NIC [0000.402] W> Skipping boost for clk: BPMP_APB [0000.406] W> Skipping boost for clk: AXI_CBB [0000.409] W> Skipping boost for clk: AON_CPU_NIC [0000.414] W> Skipping boost for clk: CAN1 [0000.417] W> Skipping boost for clk: CAN2 [0000.422] I> Boot-device: eMMC [0000.425] I> Boot-device: eMMC [0000.434] I> Sdmmc: HS400 mode enabled [0000.438] I> ECC region[0]: Start:0x0, End:0x0 [0000.443] I> ECC region[1]: Start:0x0, End:0x0 [0000.447] I> ECC region[2]: Start:0x0, End:0x0 [0000.451] I> ECC region[3]: Start:0x0, End:0x0 [0000.455] I> ECC region[4]: Start:0x0, End:0x0 [0000.459] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.465] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.469] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.474] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.478] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.484] E> FAILED: Thermal config [0000.491] E> FAILED: MEMIO rail config [0000.504] I> Boot-device: eMMC [0000.514] I> sdmmc bdev is already initialized [0000.581] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ÿâ [0000.589] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-fc4604fb) [0000.590] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.590] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.591] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.597] W> device prod register failed [0000.600] I> Boot-device: eMMC [0000.603] I> Boot_device: SDMMC_BOOT instance: 3 [0000.609] I> sdmmc-3 params source = boot args [0000.612] I> sdmmc bdev is already initialized [0000.616] I> sdmmc-3 params source = boot args [0000.623] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.630] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.632] W> No valid slot number is found in scratch register [0000.637] W> Return default slot: _a [0000.641] I> Active Boot chain : 0 [0000.644] I> parsing oem signed section of bpmp-fw header done [0000.650] I> bpmp-fw binary init read from storage [0000.655] I> oem authentication of bpmp-fw header done [0000.661] I> bpmp-fw binary done read from storage [0000.664] I> bpmp-fw: Authentication init Done [0000.668] I> parsing oem signed section of cpubl header done [0000.674] I> cpubl binary init read from storage [0000.678] I> bpmp-fw: Authentication Finalize Done [0000.683] I> oem authentication of cpubl header done [0000.687] I> cpubl binary done read from storage [0000.692] I> cpubl: Authentication init Done [0000.697] I> parsing oem signed section of rce header done [0000.701] I> rce binary init read from storage [0000.706] I> Relocating BR-BCT [0000.709] I> cpubl: Authentication Finalize Done [0000.713] I> oem authentication of rce header done [0000.718] I> rce binary done read from storage [0000.722] I> rce: Authentication init Done [0000.727] I> parsing oem signed section of ape header done [0000.731] I> ape binary init read from storage [0000.736] I> rce: Authentication Finalize Done [0000.740] I> oem authentication of ape header done [0000.744] I> ape binary done read from storage [0000.749] I> ape: Authentication init Done [0000.754] I> parsing oem signed section of tos header done [0000.758] I> tos binary init read from storage [0000.762] I> ape: Authentication Finalize Done [0000.767] I> oem authentication of tos header done [0000.771] I> tos binary done read from storage [0000.776] I> tos: Authentication init Done [0000.780] I> parsing oem signed section of bpmp-fw-dtb header done [0000.786] I> bpmp-fw-dtb binary init read from storage [0000.791] I> tos: Authentication Finalize Done [0000.796] I> oem authentication of bpmp-fw-dtb header done [0000.800] I> bpmp-fw-dtb binary done read from storage [0000.805] I> bpmp-fw-dtb: Authentication init Done [0000.811] I> parsing oem signed section of cpubl-dtb header done [0000.816] I> cpubl-dtb binary init read from storage [0000.820] I> bpmp-fw-dtb: Authentication Finalize Done [0000.857] I> oem authentication of cpubl-dtb header done [0000.858] I> cpubl-dtb binary done read from storage [0000.858] I> cpubl-dtb: Authentication init Done [0000.860] I> parsing oem signed section of eks header done [0000.861] I> eks binary init read from storage [0000.861] I> cpubl-dtb: Authentication Finalize Done [0000.862] I> oem authentication of eks header done [0000.866] I> eks binary done read from storage [0000.870] I> eks: Authentication init Done [0000.874] I> eks: Authentication Finalize Done [0000.878] I> EKB detected (length: 0x410) @ VA:0x5270a400 ÿäNOTICE: BL31: v1.3(release):23b153a63 NOTICE: BL31: Built : 22:43:07, Dec 9 2019 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! keystore-demo: 141: Hello world from keystore-demo app keystore-demo: 207: main: EKB contents match expected value exit called, thread 0xffffffffea88ed58, name trusty_app_2_7d18fc60-e9fc-11e8 platform_bootstrap_epilog: trusty bootstrap complete ÿâ welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is c1b4e372932429f2737cf722e1219e71 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg initialized mrq initialized ÿá [0001.340] I> Welcome to Cboot [0001.341] I> Cboot Version: t194-8a9e8a5aÿâfmon_post initialized ÿá [0001.341] I> CPU-BL Params @ 0xf2820000 [0001.341] I> 0) Base:0x00000000 Size:0x00000000 [0001.343] I> 1) Base:0xf1100000 Size:0x00100000 [0001.347] I> 2) Base:0xf2000000 Size:0x00200000 [0001.352] I> 3) Base:0xf1200000 Size:0x00200000 [0001.356] I> 4) Base:0xf1000000 Size:0x00100000 [0001.360] I> 5) Base:0xf0f00000 Size:0x00100000ÿâclk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ÿá [0001.430] I> 6) Base:0xf3800000 Size:0x00400000 [0001.434] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.439] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.443] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.448] I> 10) Base:0xf3000000 Size:0x00800000 [0001.452] I> 11) Base:0x40000000 Size:0x00040000 [0001.457] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.461] I> 13) Base:0x40046000 Size:0x00002000 [0001.465] I> 14) Base:0x40048000 Size:0x00002000 [0001.470] I> 15) Base:0xac000000 Size:0x00004000 [0001.474] I> 16) Base:0x4004a000 Size:0x00002000 ÿâemc_debugfs initialized ÿá[0001.479] I> 17) Base:0xf0b00000 Size:0x00100000 ÿâdvs_debugfs initialized fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ÿá[0001.486] I> 18) Base:0x4004c000 Size:0x00002000 [0001.539] I> 19) Base:0xf2200000 Size:0x00600000 [0001.543] I> 20) Base:0x4004e000 Size:0x00002000 [0001.547] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.552] I> 22) Base:0x00000000 Size:0x00000000 [0001.556] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.561] I> 24) Base:0xf6000000 Size:0x02000000 [0001.565] I> 25) Base:0x40050000 Size:0x00002000 [0001.570] I> 26) Base:0x40040000 Size:0x00006000 [0001.574] I> 27) Base:0xf1800000 Size:0x00400000 [0001.579] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.583] I> 29) Base:0xf1400000 Size:0x00400000 [0001.588] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.592] I> 31) Base:0x00000000 Size:0x00000000 [0001.597] I> 32) Base:0xf8000000 Size:0x08000000 [0001.601] I> 33) Base:0x00000000 Size:0x00000000 [0001.605] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.610] I> 35) Base:0xab000000 Size:0x01000000 [0001.614] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.619] I> 37) Base:0xf2800000 Size:0x00800000 [0001.623] I> 38) Base:0x80000000 Size:0x20000000 [0001.628] I> 39) Base:0xb0000000 Size:0x08000000 [0001.632] I> 40) Base:0x00000000 Size:0x00000000 [0001.637] I> 41) Base:0x00000000 Size:0x00000000 [0001.641] I> 42) Base:0x00000000 Size:0x00000000 [0001.646] I> 43) Base:0x00000000 Size:0x00000000 [0001.650] I> 44) Base:0x00000000 Size:0x00000000 [0001.655] I> 45) Base:0x00000000 Size:0x00000000 [0001.659] GIC-SPI Target CPU: 0 [0001.662] Interrupts Init done [0001.665] calling constructors [0001.668] initializing heap [0001.670] I> Heap: [0xa0690588 ... 0xab000000] [0001.675] initializing threads [0001.678] initializing timers [0001.680] creating bootstrap completion thread [0001.685] top of bootstrap2() [0001.687] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.692] initializing platform [0001.695] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.701] W> device prod register failed [0001.704] I> Bl_dtb @0xaaf00000 [0001.712] E> "plugin-manager" doesn't exist, creating [0001.712] E> "ids" doesn't exist, creating [0001.717] E> "connection" doesn't exist, creating [0001.721] E> "configs" doesn't exist, creating [0001.732] I> Find /i2c@3160000's alias i2c0 [0001.733] I> Reading eeprom i2c=0 address=0x50 [0001.758] I> Device at /i2c@3160000:0x50 [0001.759] I> Reading eeprom i2c=0 address=0x56 [0001.783] I> Device at /i2c@3160000:0x56 [0001.786] I> Find /i2c@3180000's alias i2c2 [0001.786] I> Reading eeprom i2c=2 address=0x54 [0001.788] E> I2C: slave not found in slaves. [0001.788] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.789] E> I2C_DEV: Failed to send register address 0x00000000. [0001.790] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.797] E> eeprom: Failed to read I2C slave device [0001.802] I> Eeprom read failed 0x3526070d [0001.806] I> Reading eeprom i2c=2 address=0x57 [0001.811] E> I2C: slave not found in slaves. [0001.815] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.822] E> I2C_DEV: Failed to send register address 0x00000000. [0001.828] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.837] E> eeprom: Failed to read I2C slave device [0001.842] I> Eeprom read failed 0x3526070d [0001.846] I> Reading eeprom i2c=2 address=0x52 [0001.851] E> I2C: slave not found in slaves. [0001.855] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.862] E> I2C_DEV: Failed to send register address 0x00000000. [0001.868] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.878] E> eeprom: Failed to read I2C slave device [0001.882] I> Eeprom read failed 0x3526070d [0001.889] I> Find /i2c@c240000's alias i2c1 [0001.890] I> Reading eeprom i2c=1 address=0x52 [0001.897] E> I2C: Timeout while polling for bus clear. Last value 0x00000000. [0001.902] E> I2C: Failed to clear bus for instance 1. [0001.907] E> I2C: Failed to clear bus for instance 1. [0001.911] E> I2C_DEV: Failed to initialize instance 1. [0001.916] E> eeprom: Can't get handle to eeprom device @164 [0001.922] I> Eeprom read failed 0x3536002a [0001.926] I> Reading eeprom i2c=1 address=0x50 [0001.932] E> I2C: Timeout while polling for bus clear. Last value 0x00000000. [0001.937] E> I2C: Failed to clear bus for instance 1. [0001.942] E> I2C: Failed to clear bus for instance 1. [0001.947] E> I2C_DEV: Failed to initialize instance 1. [0001.952] E> eeprom: Can't get handle to eeprom device @160 [0001.957] I> Eeprom read failed 0x3536002a [0001.961] I> create_pm_ids: id: 2888-0001-400-J, len: 15 [0001.966] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.977] I> create_pm_ids: id: 2822-0000-600-D, len: 15 [0001.983] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.994] I> Adding plugin-manager/ids/2888-0001-400=/i2c@3160000:module@0x50 [0002.001] E> "i2c@3160000" doesn't exist, creating [0002.005] E> "module@0x50" doesn't exist, creating [0002.010] I> Adding plugin-manager/ids/2822-0000-600=/i2c@3160000:module@0x56 [0002.017] E> "module@0x56" doesn't exist, creating [0002.025] I> Adding plugin-manager/cvm [0002.026] E> "chip-id" doesn't exist, creating [0002.029] I> Adding plugin-manager/chip-id/A02 [0002.034] I> Plugin-manager override starting [0002.039] I> node /plugin-manager/fragement-tegra-wdt-en matches [0002.051] I> node /plugin-manager/fragement-soft-wdt matches [0002.063] I> node /plugin-manager/fragment-pcie-c5-rp matches [0002.069] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0002.084] I> Disable plugin-manager status in FDT [0002.085] I> Plugin-manager override finished successfully [0002.085] I> gpio framework initialized [0002.087] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0002.089] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.090] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.098] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.105] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.111] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.117] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.125] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.133] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.139] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.147] I> fixed regulator driver initialized [0002.157] I> register 'maxim' power off handle [0002.158] I> virtual i2c enabled [0002.158] I> registered 'maxim,max20024' pmic [0002.161] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.168] I> Boot-device: eMMC [0002.171] I> Boot_device: SDMMC_BOOT instance: 3 [0002.179] I> sdmmc-3 params source = boot args [0002.180] I> sdmmc bdev is already initialized [0002.184] I> sdmmc-3 params source = boot args [0002.214] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.227] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.240] I> enabling 'vdd-hdmi-5v0' regulator [0002.247] I> regulator 'vdd-hdmi-5v0' already enabled [0002.247] E> tegrabl_display_init_regulator: hdmi cable is not connected [0002.248] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.253] E> invalid display type [0002.258] E> invalid display type [0002.260] E> cannot find any other nvdisp nodes [0002.260] E> no valid display unit config found in dtb [0002.261] W> display init failed [0002.262] I> Load in CBoot Boot Options partition and parse it [0002.264] E> Cannot read beyond partition boundary for CPUBL-CFG [0002.270] E> tegrabl_read_cbo Failed to read CPUBL-CFG partition [0002.276] W> platform_init: tegrabl_read_cbo failed with error 0xd0d0104 [0002.282] I> Hit any key to stop autoboot: 4 3 2 1 [0004.290] initializing target [0004.290] calling apps_init() [0004.291] starting app kernel_boot_app [0004.310] I> found decompressor handler: lz4-legacy [0004.311] I> decompressing BMP blob ... [0004.316] I> Kernel type = Normal [0004.316] I> Loading partition kernel-bootctrl at 0xa42b0000 from device(0x1) [0004.323] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.323] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.324] I> ########## SD boot ########## [0004.324] I> No sdcard [0004.325] I> -0 params source = [0004.327] E> Blockdev open: exit error [0004.331] E> SD boot failed, err: 724238353 [0004.335] I> ########## USB boot ########## [0004.344] W> No valid slot number is found in scratch register [0004.344] W> Return default slot: _a [0004.360] I> USB Firmware Version: 60.06 release [0004.416] I> regulator of usb2-0 already enabled [0004.425] I> regulator of usb2-1 already enabled [0004.434] I> regulator of usb2-2 already enabled [0004.446] I> enabling 'vdd-5v-sata' regulator [0005.515] I> USB 2.0 port 4 new high-speed USB device detected [0005.517] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa069a300, cmd_ring.dma = 0xa069a380 [0005.517] E> slot id is 1 [0005.519] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa069a300, cmd_ring.dma = 0xa069a380 [0005.524] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa069a300, cmd_ring.dma = 0xa069a380 [0005.528] I> [0005.528] I> Enumerated USB Device 2109:2813 [0005.532] I> [0005.534] E> Enumerated device doesn't belong to MSD class or protocol is not bulk-only!! [0005.542] E> USBMSD: Failed to initialize Enumerated USB device either not an MSD device or supported protoco[0005.551] E> USBMSD: Failed to open usbmsd open, 0. [0005.556] E> Error opening USBMSD driver 0, err: 7c7c0312 [0005.561] E> Failed to initialize device 5-0 [0005.565] E> USB boot failed, err: 2088502034 [0005.570] I> ########## Fixed storage boot ########## [0005.574] I> Already published: 00010003 [0005.578] I> Look for boot partition [0005.582] I> Fallback: assuming 0th partition is boot partition [0005.587] I> Detect filesystem [0005.614] I> Loading extlinux.conf ... [0005.615] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0005.652] I> L4T boot options [0005.652] I> [1]: "primary kernel" [0005.652] I> Enter choice: [0008.653] I> Continuing with default option: 1 [0008.653] I> Loading kernel sig file from rootfs ... [0008.653] I> rootfs path: /sdmmc_user/boot/Image.sig [0008.672] I> Loading kernel binary from rootfs ... [0008.672] I> rootfs path: /sdmmc_user/boot/Image [0008.888] I> Validate kernel ... [0008.889] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0009.231] I> No kernel-dtb binary path [0009.231] I> Loading kernel-dtb binary from partition ... [0009.231] W> No valid slot number is found in scratch register [0009.232] W> Return default slot: _a [0009.232] I> A/B: bin_type (38) slot 0 [0009.232] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0009.241] I> Validate kernel-dtb ... [0009.242] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0009.247] I> Loading ramdisk from rootfs ... [0009.248] I> rootfs path: /sdmmc_user/boot/initrd [0009.301] I> Kernel hdr @0xa42b0000 [0009.301] I> Kernel dtb @0x90000000 [0009.301] I> decompressor handler not found [0009.301] I> Copying kernel image (34191376 bytes) from 0xa42b0000 to 0x80080000 ... [0009.308] I> Done [0009.310] I> Updated bpmp info to DTB [0009.311] I> Ramdisk: Base: 0x92000000; Size: 0x54ead4 [0009.311] I> Updated initrd info to DTB [0009.311] W> WARN: Fail to override "console=none" in commandline [0009.314] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0009.321] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0009.328] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0009.335] W> No valid slot number is found in scratch register [0009.341] W> Return default slot: _a [0009.345] I> Active slot suffix: [0009.348] I> add_boot_slot_suffix: slot_suffix = [0009.352] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 rootfstype=ext4 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0009.386] I> Updated bootarg info to DTB [0009.390] W> MAC addr invalid! [0009.393] E> Failed to get WIFI MAC address [0009.397] W> MAC addr invalid! [0009.399] E> Failed to get Bluetooth MAC address [0009.404] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:cb:a4:05 [0009.411] E> "plugin-manager" doesn't exist, creating [0009.415] I> Adding /chosen/plugin-manager/cvm [0009.419] E> "chip-id" doesn't exist, creating [0009.423] I> Adding /chosen/plugin-manager/chip-id [0009.428] E> "configs" doesn't exist, creating [0009.432] I> Adding /chosen/plugin-manager/configs [0009.437] E> "ids" doesn't exist, creating [0009.441] I> Adding /chosen/plugin-manager/ids [0009.446] E> "odm-data" doesn't exist, creating [0009.450] I> Adding /chosen/plugin-manager/odm-data [0009.458] E> "memory" doesn't exist, creating [0009.459] I> [0] START: 0x80000000, END: 0xac000000 [0009.463] I> [1] START: 0xac004000, END: 0xf09d0000 [0009.468] I> [2] START: 0xf09dc000, END: 0xf09e0000 [0009.473] I> dram_block larger than 80000000 [0009.477] I> [3] START: 0x100000000, END: 0x480000000 [0009.482] I> added [base:0x80000000, size:0x2c000000] to /memory [0009.488] I> added [base:0xac200000, size:0x44600000] to /memory [0009.493] I> added [base:0x100000000, size:0x380000000] to /memory [0009.501] I> Updated memory info to DTB [0009.503] E> add_disp_param: failed to get display params for du=0 [0009.510] E> "reset" doesn't exist, creating [0009.514] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0009.518] I> Enabled cpu-0 (mpidr: 0x0) node in FDT [0009.523] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0009.527] I> Enabled cpu-1 (mpidr: 0x1) node in FDT [0009.532] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0009.537] I> Enabled cpu-2 (mpidr: 0x100) node in FDT [0009.542] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0009.547] I> Enabled cpu-3 (mpidr: 0x101) node in FDT [0009.551] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0009.556] I> Enabled cpu-4 (mpidr: 0x200) node in FDT [0009.561] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0009.566] I> Enabled cpu-5 (mpidr: 0x201) node in FDT [0009.571] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0009.575] I> Enabled cpu-6 (mpidr: 0x300) node in FDT [0009.580] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0009.585] I> Enabled cpu-7 (mpidr: 0x301) node in FDT [0009.591] E> "misc-data" doesn't exist, creating [0009.595] I> Boot-device: eMMC [0009.597] I> Add boot-sdmmc to plugin-manager/misc-data [0009.603] I> Add storage-sdmmc to plugin-manager/misc-data [0009.608] W> Unknown storage device [0009.611] I> Add serial number:0423418010426 as DT property [0009.618] I> Plugin-manager override starting [0009.621] I> node /plugin-manager/fragement-tegra-wdt-en matches [0009.629] I> node /plugin-manager/fragement-soft-wdt matches [0009.636] I> node /plugin-manager/fragment-pcie-c5-rp matches [0009.640] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0009.651] I> Disable plugin-manager status in FDT [0009.652] I> Plugin-manager override finished successfully [0009.654] I> tegrabl_load_kernel_and_dtb: Done [0009.658] E> tegrabl_display_clear: display is not initialized [0009.664] W> Boot logo display failed... [0009.667] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-1935) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Dec 9 22:52:02 PST 2019 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 380000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 12.125804] tegra-i2c c240000.i2c: pio timed out addr: 0x8 tlen:28 rlen:24 [ 12.126028] tegra-i2c c240000.i2c: --- register dump for debugging ---- [ 12.126181] tegra-i2c c240000.i2c: I2C_CNFG - 0x22c00 [ 12.126305] tegra-i2c c240000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 12.126462] tegra-i2c c240000.i2c: I2C_FIFO_CONTROL - 0x0 [ 12.126603] tegra-i2c c240000.i2c: I2C_FIFO_STATUS - 0x800080 [ 12.126736] tegra-i2c c240000.i2c: I2C_MST_FIFO_CONTROL - 0x70000 [ 12.126897] tegra-i2c c240000.i2c: I2C_MST_FIFO_STATUS - 0x7c0000 [ 12.127034] tegra-i2c c240000.i2c: I2C_MST_PACKET_TRANSFER_CNT - 0x0 [ 12.127213] tegra-i2c c240000.i2c: I2C_INT_MASK - 0x7d [ 12.127334] tegra-i2c c240000.i2c: I2C_INT_STATUS - 0x2 [ 12.127474] tegra-i2c c240000.i2c: i2c transfer timed out addr: 0x8 [ 12.127659] ucsi_ccg 1-0008: read version failed [ 12.127768] ucsi_ccg 1-0008: get_fw_info fail,, err=-110 [ 22.621784] tegra-i2c c240000.i2c: pio timed out addr: 0x40 tlen:16 rlen:0 [ 22.621988] tegra-i2c c240000.i2c: --- register dump for debugging ---- [ 22.622111] tegra-i2c c240000.i2c: I2C_CNFG - 0x22c00 [ 22.622206] tegra-i2c c240000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 22.622328] tegra-i2c c240000.i2c: I2C_FIFO_CONTROL - 0x0 [ 22.622429] tegra-i2c c240000.i2c: I2C_FIFO_STATUS - 0x800080 [ 22.622531] tegra-i2c c240000.i2c: I2C_MST_FIFO_CONTROL - 0x70000 [ 22.622657] tegra-i2c c240000.i2c: I2C_MST_FIFO_STATUS - 0x7f0000 [ 22.622767] tegra-i2c c240000.i2c: I2C_MST_PACKET_TRANSFER_CNT - 0x0 [ 22.622882] tegra-i2c c240000.i2c: I2C_INT_MASK - 0x7c [ 22.622975] tegra-i2c c240000.i2c: I2C_INT_STATUS - 0x2 [ 22.623071] tegra-i2c c240000.i2c: i2c transfer timed out addr: 0x40 [ 22.623415] ina3221x 1-0040: ina3221 reset failure status: 0xffffff92 [ 32.861805] tegra-i2c c240000.i2c: pio timed out addr: 0x41 tlen:16 rlen:0 [ 32.861969] tegra-i2c c240000.i2c: --- register dump for debugging ---- [ 32.862083] tegra-i2c c240000.i2c: I2C_CNFG - 0x22c00 [ 32.862172] tegra-i2c c240000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 32.862285] tegra-i2c c240000.i2c: I2C_FIFO_CONTROL - 0x0 [ 32.862378] tegra-i2c c240000.i2c: I2C_FIFO_STATUS - 0x800080 [ 32.862475] tegra-i2c c240000.i2c: I2C_MST_FIFO_CONTROL - 0x70000 [ 32.862578] tegra-i2c c240000.i2c: I2C_MST_FIFO_STATUS - 0x7f0000 [ 32.862684] tegra-i2c c240000.i2c: I2C_MST_PACKET_TRANSFER_CNT - 0x0 [ 32.862794] tegra-i2c c240000.i2c: I2C_INT_MASK - 0x7c [ 32.862882] tegra-i2c c240000.i2c: I2C_INT_STATUS - 0x2 [ 32.862971] tegra-i2c c240000.i2c: i2c transfer timed out addr: 0x41 [ 32.863421] ina3221x 1-0041: ina3221 reset failure status: 0xffffff92 [ 36.432090] cgroup: cgroup2: unknown option "nsdelegate" [ 37.492061] Could not get extcon-dev /host1x/nvdisplay@15210000:typec0(0) [ 37.494180] Could not get extcon-dev /host1x/nvdisplay@15220000:typec1(1) [ 37.497016] Could not get extcon-dev /xhci@3610000:id(0) [ 37.500910] Could not get extcon-dev /xudc@3550000:vbus(0) [ 37.508781] Could not get extcon-dev /host1x/nvdisplay@15210000:typec0(0) [ 37.508912] iwlwifi 0003:01:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2 [ 37.508916] iwlwifi 0003:01:00.0: Falling back to user helper [ 37.511123] Could not get extcon-dev /host1x/nvdisplay@15220000:typec1(1) [ 37.513944] Could not get extcon-dev /xhci@3610000:id(0) [ 37.517589] Could not get extcon-dev /xudc@3550000:vbus(0) [ 37.730875] random: crng init done [ 37.730988] random: 7 urandom warning(s) missed due to ratelimiting [ 38.063730] iwlwifi 0003:01:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2 [ 38.063918] iwlwifi 0003:01:00.0: Falling back to user helper [ 38.065328] iwlwifi 0003:01:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2 [ 38.065510] iwlwifi 0003:01:00.0: Falling back to user helper [ 38.067093] iwlwifi 0003:01:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2 [ 38.067264] iwlwifi 0003:01:00.0: Falling back to user helper [ 38.225805] thermal thermal_zone8: failed to read out thermal zone (-5) [ 104.909912] /dev/ttyGS0 is invalid, change system configuration setup on /dev/ttyTCU0 [ 104.911958] Please complete system configuration setup on the serial port. e.g. /dev/ttyUSBx where can x 0, 1, 2 etc.