[ 57.058668] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 388.966967] sysrq: Rehutdown state requested 1 Rebooting system ... [0000.064] I> MB1 (version: 0.28.0.0-t234-54845784-ec016368) [0000.069] I> t234-A01-0-Silicon (0x12347) Prod [0000.074] I> Boot-mode : Coldboot [0000.077] I> Emulation: [0000.079] I> Entry timestamp: 0x00000000 [0000.083] I> last_boot_error: 0x0 [0000.086] I> BR-BCT: preprod_dev_sign: 0 [0000.090] I> rst_source: 0xb, rst_level: 0x1 [0000.094] I> Task: Bootchain select WAR set (0x5000c741) [0000.099] I> Active chain: 0 [0000.102] I> Task: CRC check (0x5001dab5) [0000.106] I> Task: Initialize MB2 params (0x5000d78d) [0000.111] I> MB2-params @ 0x40060000 [0000.115] I> Task: Crypto init (0x5001cb8d) [0000.119] I> Task: Secure debug controls (0x5000cd21) [0000.124] I> Task: strap war set (0x5000c70d) [0000.128] I> strap value(0x4000001) set to 0x4000001 [0000.133] I> Task: Initialize SOC Therm (0x5001af85) [0000.138] I> Task: Program NV master stream id (0x5000ccd5) [0000.143] I> Task: Verify boot mode (0xd482021) [0000.149] I> Task: Alias fuses (0x500109cd) [0000.153] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.160] I> Task: Print SKU type (0x5000fee1) [0000.165] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000038 [0000.170] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0000.174] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0000.179] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.183] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.187] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.191] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.195] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.199] I> FUSE_SKU_INFO_0 = 0xd3 [0000.203] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.207] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.210] I> SKU: Prod [0000.213] I> Task: Boost clocks (0x5001462d) [0000.217] I> Initializing PLLC2 for AXI_CBB. [0000.221] I> AXI_CBB : src = 35, divisor = 0 [0000.225] I> Task: Voltage monitor (0x50014639) [0000.229] I> VMON: Vmon re-calibration and fine tuning done [0000.235] I> Task: UPHY init (0x5000dced) [0000.239] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0000.245] I> Task: Boot device init (0x50000b39) [0000.249] I> Boot_device: QSPI_FLASH instance: 0 [0000.254] I> Qspi clock source : pllc_out0 [0000.258] I> QSPI Flash: Macronix 64MB [0000.261] I> QSPI-0l initialized successfully [0000.266] I> Task: TSC init (0x5001fa6d) [0000.270] I> Task: Load membct (0x50011fb9) [0000.274] I> RAM_CODE 0x4000001 [0000.277] I> Loading MEMBCT [0000.279] I> Active chain: 0 [0000.282] I> Slot: 0 [0000.284] I> Binary[0] block-0 (partition size: 0x40000) [0000.289] I> get_binary_info: Binary name: MEM-BCT-0 [0000.294] I> Size of crypto header is 8192 [0000.298] I> BCH load address is : 0x40050000 [0000.302] I> Size of crypto header is 8192 [0000.306] I> BCH of MEM-BCT-0 read from storage [0000.311] I> BCH address is : 0x40050000 [0000.315] I> MEM-BCT-0 header integrity check is success [0000.320] I> Binary magic in BCH component 0 is MEM0 [0000.325] I> component binary type is 0 [0000.329] I> MEM-BCT-0 binary is read from storage [0000.334] I> MEM-BCT-0 binary integrity check is success [0000.339] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.345] I> RAM_CODE 0x4000001 [0000.351] I> RAM_CODE 0x4000001 [0000.355] I> Task: Load Page retirement list (0x50011601) [0000.360] I> Task: SDRAM params override (0x50011f95) [0000.365] I> Task: Save mem-bct info (0x500147fd) [0000.369] I> Task: Carveout allocate (0x50014861) [0000.374] I> RCM blob carveout will not be allocated [0000.379] I> ECC region[0]: Start:0x0, End:0x0 [0000.383] I> ECC region[1]: Start:0x0, End:0x0 [0000.387] I> ECC region[2]: Start:0x0, End:0x0 [0000.391] I> ECC region[3]: Start:0x0, End:0x0 [0000.396] I> ECC region[4]: Start:0x0, End:0x0 [0000.400] I> Non-ECC region[0]: Start:0x80000000, End:0x480000000 [0000.406] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.411] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.415] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.420] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.430] I> allocated(CO:44) base:0x449800000 size:0x36800000 align: 0x100000 [0000.437] I> allocated(CO:31) base:0x440000000 size:0x8000000 align: 0x8000000 [0000.444] I> allocated(CO:43) base:0x43c000000 size:0x4000000 align: 0x200000 [0000.451] I> allocated(CO:20) base:0x43a000000 size:0x2000000 align: 0x2000000 [0000.458] I> allocated(CO:24) base:0x438000000 size:0x2000000 align: 0x2000000 [0000.465] I> allocated(CO:28) base:0x436000000 size:0x2000000 align: 0x2000000 [0000.472] I> allocated(CO:29) base:0x434000000 size:0x2000000 align: 0x2000000 [0000.479] I> allocated(CO:22) base:0x448000000 size:0x1000000 align: 0x1000000 [0000.486] I> allocated(CO:41) base:0x433000000 size:0x1000000 align: 0x100000 [0000.493] I> allocated(CO:35) base:0x432200000 size:0xe00000 align: 0x10000 [0000.500] I> allocated(CO:02) base:0x449000000 size:0x800000 align: 0x800000 [0000.507] I> allocated(CO:03) base:0x431800000 size:0x800000 align: 0x800000 [0000.514] I> allocated(CO:06) base:0x431000000 size:0x800000 align: 0x800000 [0000.521] I> allocated(CO:10) base:0x430800000 size:0x800000 align: 0x800000 [0000.528] I> allocated(CO:56) base:0x430000000 size:0x800000 align: 0x200000 [0000.535] I> allocated(CO:07) base:0x42fc00000 size:0x400000 align: 0x400000 [0000.542] I> allocated(CO:33) base:0x42f800000 size:0x400000 align: 0x200000 [0000.549] I> allocated(CO:01) base:0x432100000 size:0x100000 align: 0x100000 [0000.555] I> allocated(CO:04) base:0x432000000 size:0x100000 align: 0x100000 [0000.562] I> allocated(CO:05) base:0x42f700000 size:0x100000 align: 0x100000 [0000.569] I> allocated(CO:08) base:0x42f600000 size:0x100000 align: 0x100000 [0000.576] I> allocated(CO:09) base:0x42f500000 size:0x100000 align: 0x100000 [0000.583] I> allocated(CO:15) base:0x42f400000 size:0x100000 align: 0x100000 [0000.590] I> allocated(CO:17) base:0x42f300000 size:0x100000 align: 0x100000 [0000.597] I> allocated(CO:23) base:0x42f200000 size:0x100000 align: 0x100000 [0000.604] I> allocated(CO:27) base:0x42f100000 size:0x100000 align: 0x100000 [0000.611] I> allocated(CO:42) base:0x42f000000 size:0x100000 align: 0x100000 [0000.618] I> allocated(CO:54) base:0x42ef80000 size:0x80000 align: 0x80000 [0000.625] I> allocated(CO:34) base:0x42ef70000 size:0x10000 align: 0x10000 [0000.631] I> allocated(CO:47) base:0x42ea00000 size:0x400000 align: 0x200000 [0000.638] I> allocated(CO:72) base:0x42e800000 size:0x200000 align: 0x10000 [0000.645] I> allocated(CO:48) base:0x42ef50000 size:0x20000 align: 0x10000 [0000.652] I> allocated(CO:69) base:0x42ef30000 size:0x20000 align: 0x10000 [0000.658] I> allocated(CO:49) base:0x42ef20000 size:0x10000 align: 0x10000 [0000.665] I> allocated(CO:50) base:0x42ef10000 size:0x10000 align: 0x10000 [0000.672] I> allocated(CO:52) base:0x42ef00000 size:0x10000 align: 0x10000 [0000.679] I> NSDRAM base: 0x80000000, end: 0x42ef70000 [0000.684] I> Task: Thermal check (0x500208f9) [0000.688] I> max_chip_limit = 105 [0000.691] I> min_chip_limit = -28 [0000.694] I> max temp read = 38 [0000.697] I> min temp read = 36 [0000.700] I> Task: Update FSI SCR with thermal fuse data (0x50020a05) [0000.706] I> Task: Enable WDT 5th expiry (0x50020699) [0000.711] I> Task: I2C register (0x50000ad9) [0000.715] I> Task: Reset FSI (0x50014635) [0000.719] I> Task: Pinmux init (0x500137bd) [0000.724] I> Task: Prod config init (0x50013c09) [0000.728] I> Task: Pad voltage init (0x50013859) [0000.733] I> Task: Prod init (0x50013c4d) [0000.737] I> Task: Common rail init (0x50014305) [0000.741] I> DONE: Thermal config [0000.745] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.753] I> DONE: SOC rail config [0000.757] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0000.763] I> DONE: MEMIO rail config [0000.767] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT. [0000.773] I> DONE: GPU rail info [0000.777] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT. [0000.783] I> DONE: CV rail info [0000.786] I> Task: Mem clock src (0x50011de5) [0000.791] I> Task: Misc. board config (0x500143ad) [0000.796] W> PMIC_CONFIG: Platform config not found in MB1 BCT. [0000.802] I> Task: SDRAM init (0x50011de9) [0000.808] I> SDRAM-params @ 0xd485000 [0000.812] I> MSS code-drop: NvBootSdramInit [0000.816] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0000.823] I> MSS CAR: Init PLLM [0000.826] I> MSS CAR: Init PLLHUB [0000.831] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0000.842] I> mb1_sdram_init Done ! [0000.845] I> SDRAM Size in Total 0x400000000 [0000.850] I> Task: Dram Ecc scrub (0x50011729) [0000.854] I> Task: DRAM alias check (0x50011f8d) [0000.872] I> Task: Program NSDRAM carveout (0x50015171) [0000.878] I> NSDRAM carveout encryption is enabled [0000.883] I> Program NSDRAM carveout [0000.887] I> Task: Register checker (0x50011f91) [0000.895] I> Task: Enable clock-mon (0x5001fa5d) [0000.901] I> FMON: Fmon re-programming done [0000.905] I> Task: Mapper init (0x5001dfed) [0000.911] I> Task: SC7 Context Init (0x5001fd5d) [0000.917] I> Task: CCPLEX IST init (0x5000d561) [0000.923] I> Task: CPU WP0 (0x5000c7a9) [0000.928] I> Loading MCE [0000.931] I> Active chain: 0 [0000.934] I> Slot: 0 [0000.936] I> Binary[8] block-0 (partition size: 0x80000) [0000.942] I> get_binary_info: Binary name: MCE [0000.947] I> Size of crypto header is 8192 [0000.952] I> BCH load address is : 0x4003e000 [0000.957] I> Size of crypto header is 8192 [0000.962] I> BCH of MCE read from storage [0000.966] I> BCH address is : 0x4003e000 [0000.971] I> MCE header integrity check is success [0000.977] I> Binary magic in BCH component 0 is MTSM [0000.982] I> component binary type is 8 [0000.986] I> Size of crypto header is 8192 [0000.992] I> MCE binary is read from storage [0000.998] I> MCE binary integrity check is success [0001.003] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0001.011] I> Size of crypto header is 8192 [0001.026] I> Size of crypto header is 8192 [0001.031] I> Sending WP0 mailbox command to PSC [0001.041] I> Task: XUSB Powergate (0x50000ae5) [0001.047] I> Skipping powergate XUSB. [0001.051] I> Task: MB1 fixed firewalls (0x5001f0d9) [0001.071] I> Task: Load bpmp-fw (0x5001f41d) [0001.077] I> Active chain: 0 [0001.080] I> Slot: 0 [0001.082] I> Binary[15] block-0 (partition size: 0x180000) [0001.088] I> get_binary_info: Binary name: BPMP_FW [0001.094] I> Size of crypto header is 8192 [0001.098] I> BCH load address is : 0x807fe000 [0001.104] I> Size of crypto header is 8192 [0001.108] I> BCH of BPMP_FW read from storage [0001.113] I> BCH address is : 0x807fe000 [0001.119] I> BPMP_FW header integrity check is success [0001.124] I> Binary magic in BCH component 0 is BPMF [0001.129] I> component binary type is 15 [0001.134] I> Size of crypto header is 8192 [0001.149] I> BPMP_FW binary is read from storage [0001.156] I> BPMP_FW binary integrity check is success [0001.162] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfdc40) [0001.170] I> Active chain: 0 [0001.173] I> Slot: 0 [0001.175] I> Binary[16] block-10000 (partition size: 0x400000) [0001.182] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.188] I> Size of crypto header is 8192 [0001.192] I> BCH load address is : 0x807fc000 [0001.198] I> Size of crypto header is 8192 [0001.203] I> BCH of BPMP_FW_DTB read from storage [0001.208] I> BCH address is : 0x807fc000 [0001.213] I> BPMP_FW_DTB header integrity check is success [0001.219] I> Binary magic in BCH component 0 is BPMD [0001.224] I> component binary type is 16 [0001.228] I> Size of crypto header is 8192 [0001.235] I> BPMP_FW_DTB binary is read from storage [0001.241] I> BPMP_FW_DTB binary integrity check is success [0001.246] I> Binary BPMP_FW_DTB loaded successfully at 0x807dbff0 (0x1fe80) [0001.255] I> Task: Load psc-fw (0x5001f5a5) [0001.261] I> Active chain: 0 [0001.264] I> Slot: 0 [0001.266] I> Binary[17] block-0 (partition size: 0xc0000) [0001.273] I> get_binary_info: Binary name: PSC_FW [0001.278] I> Size of crypto header is 8192 [0001.282] I> BCH load address is : 0x80ffe000 [0001.288] I> Size of crypto header is 8192 [0001.292] I> BCH of PSC_FW read from storage [0001.297] I> BCH address is : 0x80ffe000 [0001.303] I> PSC_FW header integrity check is success [0001.308] I> Binary magic in BCH component 0 is PFWP [0001.313] I> component binary type is 17 [0001.317] I> Size of crypto header is 8192 [0001.326] I> PSC_FW binary is read from storage [0001.332] I> PSC_FW binary integrity check is success [0001.337] I> Binary PSC_FW loaded successfully at 0x80000000 (0x59980) [0001.346] I> Task: Load nvdec-fw (0x5001f619) [0001.351] I> Active chain: 0 [0001.355] I> Slot: 0 [0001.357] I> Binary[7] block-0 (partition size: 0x100000) [0001.363] I> get_binary_info: Binary name: NVDEC [0001.368] I> Size of crypto header is 8192 [0001.373] I> BCH load address is : 0x800fe000 [0001.378] I> Size of crypto header is 8192 [0001.383] I> BCH of NVDEC read from storage [0001.387] I> BCH address is : 0x800fe000 [0001.393] I> NVDEC header integrity check is success [0001.398] I> Binary magic in BCH component 0 is NDEC [0001.404] I> component binary type is 7 [0001.408] I> Size of crypto header is 8192 [0001.415] I> NVDEC binary is read from storage [0001.421] I> NVDEC binary integrity check is success [0001.426] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0001.437] I> Task: Load tsec-fw (0x5001f9a5) [0001.442] I> TSEC-FW load support not enabled [0001.447] I> Task: GPIO interrupt map (0x50014541) [0001.453] I> Task: SC7 context save (0x5001fe9d) [0001.459] I> NV_SC7 Context addr: 0xa0000000 [0001.465] I> Active chain: 0 [0001.468] I> Slot: 0 [0001.470] I> Binary[27] block-0 (partition size: 0x100000) [0001.476] I> get_binary_info: Binary name: BR_BCT [0001.481] I> Size of crypto header is 8192 [0001.486] I> Size of crypto header is 8192 [0001.491] I> BR_BCT binary is read from storage [0001.496] I> BR_BCT binary integrity check is success [0001.502] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.509] I> Active chain: 0 [0001.513] I> Slot: 0 [0001.515] I> Binary[13] block-0 (partition size: 0x30000) [0001.521] I> get_binary_info: Binary name: SC7-FW [0001.526] I> Size of crypto header is 8192 [0001.531] I> Size of crypto header is 8192 [0001.535] I> BCH load address is : 0xa0002000 [0001.541] I> Size of crypto header is 8192 [0001.546] I> BCH of SC7-FW read from storage [0001.550] I> BCH address is : 0xa0002000 [0001.556] I> SC7-FW header integrity check is success [0001.561] I> Binary magic in BCH component 0 is WB0B [0001.566] I> component binary type is 13 [0001.570] I> Size of crypto header is 8192 [0001.577] I> SC7-FW binary is read from storage [0001.582] I> SC7-FW binary integrity check is success [0001.588] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x26220) [0001.596] I> Active chain: 0 [0001.599] I> Slot: 0 [0001.601] I> Binary[22] block-0 (partition size: 0x30000) [0001.607] I> get_binary_info: Binary name: PSC_RF [0001.613] I> Size of crypto header is 8192 [0001.617] I> Size of crypto header is 8192 [0001.622] I> BCH load address is : 0xa002a220 [0001.627] I> Size of crypto header is 8192 [0001.632] I> BCH of PSC_RF read from storage [0001.637] I> BCH address is : 0xa002a220 [0001.642] I> PSC_RF header integrity check is success [0001.648] I> Binary magic in BCH component 0 is PSCR [0001.653] I> component binary type is 22 [0001.657] I> Size of crypto header is 8192 [0001.663] I> PSC_RF binary is read from storage [0001.669] I> PSC_RF binary integrity check is success [0001.674] I> Binary PSC_RF loaded successfully at 0xa002c220 (0x1b000) [0001.696] I> Active chain: 0 [0001.699] I> Slot: 0 [0001.702] I> Binary[14] block-0 (partition size: 0x20000) [0001.708] I> get_binary_info: Binary name: MB2_RF [0001.713] I> Size of crypto header is 8192 [0001.717] I> Size of crypto header is 8192 [0001.722] I> BCH load address is : 0xa008ea48 [0001.727] I> Size of crypto header is 8192 [0001.732] I> BCH of MB2_RF read from storage [0001.737] I> BCH address is : 0xa008ea48 [0001.742] I> MB2_RF header integrity check is success [0001.748] I> Binary magic in BCH component 0 is MB2R [0001.753] I> component binary type is 14 [0001.757] I> Size of crypto header is 8192 [0001.763] I> MB2_RF binary is read from storage [0001.769] I> MB2_RF binary integrity check is success [0001.774] I> Binary MB2_RF loaded successfully at 0xa0090a48 (0x1bfa0) [0001.784] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.791] I> SC7 context fuse-bypass data is empty [0001.799] I> SC7 context save done [0001.803] I> Task: Load MB2/Applet/FSKP (0x5000d691) [0001.809] I> Loading MB2 [0001.812] I> Active chain: 0 [0001.815] I> Slot: 0 [0001.817] I> Binary[6] block-0 (partition size: 0x80000) [0001.823] I> get_binary_info: Binary name: MB2 [0001.828] I> Size of crypto header is 8192 [0001.833] I> BCH load address is : 0x8007e000 [0001.838] I> Size of crypto header is 8192 [0001.843] I> BCH of MB2 read from storage [0001.848] I> BCH address is : 0x8007e000 [0001.853] I> MB2 header integrity check is success [0001.858] I> Binary magic in BCH component 0 is MB2B [0001.864] I> component binary type is 6 [0001.868] I> Size of crypto header is 8192 [0001.877] I> MB2 binary is read from storage [0001.883] I> MB2 binary integrity check is success [0001.888] I> Binary MB2 loaded successfully at 0x80000000 (0x68e00) [0001.896] I> Task: Map CCPLEX SHARED carveout (0x5000d835) [0001.903] I> Task: Prepare MB2 params (0x5000d8f1) [0001.911] I> BR-BCT Boot Chain Fields [0001.915] I> u32_non_gpio_select_boot_chain : 0 [0001.920] I> u32_num_boot_chains : 2 [0001.925] I> bf_bl_gpio_select_boot_chain_1b : 0 [0001.931] I> Task: Program misc carveouts (0x50014bcd) [0001.937] I> Program IPC carveouts [0001.945] I> Task: Dram ecc test (0x500117a5) [0001.950] I> Task: Misc NV security settings (0x5000d0f9) [0001.957] I> NVDEC sticky bits programming done [0001.962] I> Successfully powergated NVDEC [0001.966] I> Task: Disable/Reload WDT (0x500206e1) [0001.972] I> Programmed SLCG global override := 0x0 [0001.977] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-a9c0116a) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x001eb313 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x430000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e80) I> Task: Enable hot-plug capability (0x50025b5c) I> Task: PSC mailbox init (0x50015c10) I> Task: Crypto init (0x5000573c) I> Task: Enable GP-SE clock (0x50001fe4) I> Task: DICE Identity init (0x50018fcc) I> DICE is not enabled. I> Task: OEM SC7 context save init (0x500186cc) I> Task: I2C register (0x50001e44) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e2c) I> Task: Boot device init (0x50001d74) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001d70) I> Found 57 partitions in QSPI_FLASH (instance 0) I> Task: Load and authenticate registered FWs (0x5001bfc0) I> Task: Load AUXP FWs (0x500256fc) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x42f600000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x42f300000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x43a000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 9434016 bytes I> dce: plain binary integrity check is success I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x43a000000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x42fc00000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x42f700000 I> Task: Carveout setup (0x5001e6a0) I> Program remaining OEM carveouts I> Task: Enable FSITHERM (0x50015ae4) I> Task: Enable FSI VMON (0x5001566c) I> Task: Validate FSI Therm readings (0x500156c4) I> Task: Restore XUSB sec (0x50001d44) I> Task: Enable FSI SE clock (0x5001606c) I> Task: Initialize SBSA UART CAR (0x50001f48) I> Task: Initialize CPUBL Params (0x50016f88) I> CPUBL-params @ 0x436000000 I> Task: Prepare eeprom data (0x50016d54) I> Task: FSI padctl context save (0x5001885c) E> Skipping FSI padctl config save: fsi not enabled I> Task: Unpowergate APE (0x500167cc) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: OEM firewalls (0x50022920) I> OEM firewalls configured I> Task: Powergate APE (0x50016940) I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings (0x50022ff0) I> Task: Unhalt AUXPs (0x50025964) I> Unhalting SPE.. I> Enabling combined UART spe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 243b265b351d6bb9cc7b2e3acc5d90f8 spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler h> Task: Trigger mailbox for PSC-BL1 exit (0x50015c90) I> Sending opcode 0x4d420802 to psc hNFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x448002000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: 8a33b23-73b589c-8a15f76-rel-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 h> Received ACK from psc I> TashNFO: MONITOR: user task addr: pmp: socket 0 bpmp: base binary md5 is ccd7dae126b648f6d4de17417b40e939 bpmp: combined binary md5Ox448022000, blob offset:0x00020000 INFO: MONITOR: populated user images:13 s 9a7bb16aee9be45a56e6b18b82f5e183 bpmp: firmware tag is 9a7bb16aee9be45a56e6-ccd7dae126b initialized vwdt hNFO: mret to Supervisor! INFO: psc supervisor init. nitialized mail_early initialized fuse initialized vfrel initiahNFO: psc_irq_init... INFO: enter idle task. ized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized tj_init initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator initialized avfs_clk_platform initialized powergate : Start secure NOR provnitialized dvs sinitialized clk_mach_config initialized pm suspend progress: 0x0 initialized suspend initialized strap initialized mce_dbell n (0x50018af8) I> Task: Load FSI keyblob (0x500160b4) I> Task: Unhalt AUXPs (0x5002596c) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalt successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x50017080) I> Task: Load TOS (0x50017784) I> Task: Load and authenticate registered FWs (0x5001bfc0) I> Scratch RSV109: 0x00000001 z 2.388310] Camera-FW on t234-rce-safe started TCU early console enabled. nitialized emc initialized emc_mrq ctive chain: 0nitialized clk_cal initialized uphy_dt initialized uphy_mrq I> nitialized uphy oartition name: A_cpu-bootloader I> Size of partitinitialized pg_late initialized pg_mrq_init swdtimer_init: 0 reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post n: 3670016 I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloadernitialized clk_cal_late initialized noc_late initialized cvc initialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable pwm3 enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable dsi_lp initialized clk_mach_post initialized pg_post initialized regulator_post initialized profile initialized fuse_late initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post bpmp: init complete z 2.518258] Camera-FW on t234-rce-safe ready SHA1=10150ec0 (crt 20.883 ms, total boot 151.890 ms) h> Scratch RSV109: 0x00000001 CE: FW Boot Done ctive chain: 0 I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name: A_secure-os I> MB2-params @ 0x40060000 I> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0x42ea00000 I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x43fdfe000 I> Relocating OP-TEE dtb from: 0x43feff770 to 0x42ef30000, size: 0x1976 I> [0] START: 0x80000000, SIZE: 0x3aef70000 I> [1] START: 0x436000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x430000200 I> EKB detected (length: 0x410) @ VA:0x430000200 I> Task: Prepare TOS params (0x500176fc) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x42ef30000 I> Task: OEM SC7 context save (0x50018958) I> OEM sc7 context saved I> Task: Disable MSS perf stats (0x500259f8) I> Task: Program display sticky bits (0x50025974) I> Task: Storage device deinit (0x50001eec) I> Task: SMMU external bypass disable (0x50015bf4) I> Task: SMMU init (0x50015b10) I> Task: Program CBB PCIE AMAP regions (0x50018ce0) I> Task: Program GICv3 registers (0x50025a98) I> Task: Audit firewall settings (0x50022c08) I> Task: Bootchain failure check (0x5000242c) I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> MB2 finished OTICE: BL31: v2.6(release):6363e7382 NOTICE: BL31: Built : 15:09:30, Jan 24 2023 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.19 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Jan 24 23:20:42 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: WARNING: Test OEM keys are being used! I/TC: This is only for TZ-SE testing and should NOT be used for a shipping product! I/TC: Primary CPU switching to normal world boot ietson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) ** WARNING: Test Key is used. ** Error: Could not detect network connection. Error: Could not detect network connection. UEFI Interactive Shell v2.2 EDK II UEFI v2.70 (EDK II, 0x00010000) Mapping table FS1: Alias(s):F1: MemoryMapped(0xB,0x42EA00000,0x42ECA30BF) FS0: Alias(s):F0: Fv(49A79A15-8F69-4BE7-A30C-A172F44ABCE7) FS2: Alias(s):HD2f0b0b:;BLK1: VenHw(1E5A432C-0466-4D31-B009-D4D9239271D3)/MemoryMapped(0xB,0x3610000 ,0x364FFFF)/USB(0x5,0x0)/USB(0x1,0x0)/HD(1,GPT,1DA82FE9-627B-400F-A832-D8E217A3D 102,0x186F28,0x6E00000) FS3: Alias(s):HD2f0b0l:;BLK3: VenHw(1E5A432C-0466-4D31-B009-D4D9239271D3)/MemoryMapped(0xB,0x3610000 ,0x364FFFF)/USB(0x5,0x0)/USB(0x1,0x0)/HD(11,GPT,4DC6189E-8CF3-4F6B-B599-343093F3 C16B,0x11EB28,0x20000) BLK0: Alias(s): VenHw(1E5A432C-0466-4D31-B009-D4D9239271D3)/MemoryMapped(0xB,0x3610000 ,0x364FFFF)/USB(0x5,0x0)/USB(0x1,0x0) BLK7: Alias(s): VenHw(1E5A432C-0466-4D31-B009-D4D9239271D3)/MemoryMapped(0xB,0x3610000 ,0x364FFFF)/USB(0x5,0x0)/USB(0x1,0x0)/HD(2,GPT,71746C2D-60BD-4C4D-9837-873AD80F9 E79,0x28,0x20000) BLK8: Alias(s): VenHw(1E5A432C-0466-4D31-B009-D4D9239271D3)/MemoryMapped(0xB,0x3610000 ,0x364FFFF)/USB(0x5,0x0)/USB(0x1,0x0)/HD(3,GPT,0C9A34C0-1D56-46F9-B7E4-544BEE33F 74F,0x20028,0x380) BLK9: Alias(s): VenHw(1E5A432C-0466-4D31-B009-D4D9239271D3)/MemoryMapped(0xB,0x3610000 ,0x364FFFF)/USB(0x5,0x0)/USB(0x1,0x0)/HD(4,GPT,1DFBDAF4-6F06-496B-83D4-872DB0676 363,0x203A8,0x10000) BLK10: Alias(s): VenHw(1E5A432C-0466-4D31-B009-D4D9239271D3)/MemoryMapped(0xB,0x3610000 ,0x364FFFF)/USB(0x5,0x0)/USB(0x1,0x0)/HD(5,GPT,1908B6D4-EB12-46C0-A4D5-F142C57B6 907,0x303A8,0x20000) BLK11: Alias(s): VenHw(1E5A432C-0466-4D31-B009-D4D9239271D3)/MemoryMapped(0xB,0x3610000 ,0x364FFFF)/USB(0x5,0x0)/USB(0x1,0x0)/HD(6,GPT,390F928E-DE69-4B2C-918B-B32CDCE3C 311,0x503A8,0x380) BLK12: Alias(s): VenHw(1E5A432C-0466-4D31-B009-D4D9239271D3)/MemoryMapped(0xB,0x3610000 ,0x364FFFF)/USB(0x5,0x0)/USB(0x1,0x0)/HD(7,GPT,13948F1F-B110-4560-BCC2-001DE68E9 367,0x50728,0x10000) BLK13: Alias(s): VenHw(1E5A432C-0466-4D31-B009-D4D9239271D3)/MemoryMapped(0xB,0x3610000 ,0x364FFFF)/USB(0x5,0x0)/USB(0x1,0x0)/HD(8,GPT,353EC421-16CB-47EF-B26A-7C3425BE6 B39,0x60728,0x28000) BLK14: Alias(s): VenHw(1E5A432C-0466-4D31-B009-D4D9239271D3)/MemoryMapped(0xB,0x3610000 ,0x364FFFF)/USB(0x5,0x0)/USB(0x1,0x0)/HD(9,GPT,79042CB7-D048-4755-B0C3-454CE4987 86A,0x88728,0x400) BLK2: Alias(s): VenHw(1E5A432C-0466-4D31-B009-D4D9239271D3)/MemoryMapped(0xB,0x3610000 ,0x364FFFF)/USB(0x5,0x0)/USB(0x1,0x0)/HD(10,GPT,53A33106-FB48-46CC-BCA8-1664C665 3D60,0x88B28,0x96000) BLK4: Alias(s): VenHw(1E5A432C-0466-4D31-B009-D4D9239271D3)/MemoryMapped(0xB,0x3610000 ,0x364FFFF)/USB(0x5,0x0)/USB(0x1,0x0)/HD(12,GPT,38D6FBF9-6E78-4DBC-835B-254FCEB2 DF51,0x13EB28,0x28000) BLK5: Alias(s): VenHw(1E5A432C-0466-4D31-B009-D4D9239271D3)/MemoryMapped(0xB,0x3610000 ,0x364FFFF)/USB(0x5,0x0)/USB(0x1,0x0)/HD(13,GPT,247D598A-3127-4217-932E-495918EC 8C5D,0x166B28,0x400) BLK6: Alias(s): VenHw(1E5A432C-0466-4D31-B009-D4D9239271D3)/MemoryMapped(0xB,0x3610000 ,0x364FFFF)/USB(0x5,0x0)/USB(0x1,0x0)/HD(14,GPT,2D440F90-B9A4-45FC-B4CF-506FB09E D840,0x166F28,0x20000) Press ESC in 5 seconds to skip startup.nsh or any other key to continue.Press ESC in 4 seconds to skip startup.nsh or any other key to continue.Press ESC in 3 seconds to skip startup.nsh or any other key to continue.Press ESC in 2 seconds to skip startup.nsh or any other key to continue.Press ESC in 1 seconds to skip startup.nsh or any other key to continue. Shell>