hmecd001409@DSC:~/BSP/flashdir/Linux_for_Tegra$ sudo ./tools/kernel_flash/l4t_initrd_flash.sh --external-device nvme0n1p1 -c tools/kernel_flash/flash_l4t_external.xml -p “-c bootloader/t186ref/cfg/flash_t234_qspi.xml” --showlogs --network usb0 jetson-orin-nano-devkit internal [sudo] password for hmecd001409: /home/hmecd001409/BSP/flashdir/Linux_for_Tegra/tools/kernel_flash/l4t_initrd_flash_internal.sh --no-flash --external-device nvme0n1p1 -c tools/kernel_flash/flash_l4t_external.xml -p “-c bootloader/t186ref/cfg/flash_t234_qspi.xml” --showlogs --network usb0 jetson-orin-nano-devkit internal ************************************ * * * Step 1: Generate flash packages * * * ************************************ Create folder to store images to flash Generate image for internal storage devices Generate images to be flashed ADDITIONAL_DTB_OVERLAY="" /home/hmecd001409/BSP/flashdir/Linux_for_Tegra/flash.sh --no-flash --sign “-c jetson-orin-nano-devkit internal ############################################################################### # L4T BSP Information: # R35 , REVISION: 3.1 # User release: 0.0 ############################################################################### copying emc_fuse_dev_params(/home/hmecd001409/BSP/flashdir/Linux_for_Tegra/bootloader/t186ref/BCT/tegra234-br-bct-diag-boot.dts)... done. copying device_config(/home/hmecd001409/BSP/flashdir/Linux_for_Tegra/bootloader/t186ref/BCT/tegra234-mb1-bct-device-p3767-0000.dts)... done. copying misc_config(/home/hmecd001409/BSP/flashdir/Linux_for_Tegra/bootloader/t186ref/BCT/tegra234-mb1-bct-misc-p3767-0000.dts)... done. ./tegraflash.py --chip 0x23 --applet "/home/hmecd001409/BSP/flashdir/Linux_for_Tegra/bootloader/mb1_t234_prod.bin" --skipuid --cfg readinfo_t234_min_prod.xml --dev_params tegra234-br-bct-diag-boot.dts --device_config tegra234-mb1-bct-device-p3767-0000.dts --misc_config tegra234-mb1-bct-misc-p3767-0000.dts --bins "mb2_applet applet_t234.bin" --cmd "dump eeprom cvm cvm.bin; dump custinfo custinfo_out.bin; reboot recovery" Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0228 ] tegrarcm_v2 --chip 0x23 0 --ismb2applet [ 0.0238 ] File rcm_state open failed [ 0.0243 ] ERROR: failed to read rcm_state [ 0.0243 ] [ 0.0262 ] tegrasign_v3.py --key None --getmode mode.txt [ 0.0265 ] Assuming zero filled SBK key [ 0.0251 ] Pre-processing config: tegra234-mb1-bct-device-p3767-0000.dts [ 0.0323 ] Pre-processing config: tegra234-mb1-bct-misc-p3767-0000.dts [ 0.0422 ] Parsing partition layout [ 0.0434 ] tegraparser_v2 --pt readinfo_t234_min_prod.xml.tmp [ 0.0452 ] Kernel DTB used: None [ 0.0453 ] WARNING: dce base dtb is not provided [ 0.0453 ] Parsing partition layout [ 0.0463 ] tegraparser_v2 --pt readinfo_t234_min_prod.xml.tmp [ 0.0476 ] Creating list of images to be signed [ 0.0487 ] tegrahost_v2 --chip 0x23 0 --partitionlayout readinfo_t234_min_prod.xml.bin --list images_list.xml zerosbk [ 0.0498 ] MB1: Nvheader already present is mb1_t234_prod_aligned.bin [ 0.0509 ] Header already present for mb1_t234_prod_aligned_sigheader.bin [ 0.0512 ] MB1: Nvheader already present is mb1_t234_prod_aligned.bin [ 0.0559 ] Header already present for mb1_t234_prod_aligned_sigheader.bin [ 0.0565 ] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin [ 0.0613 ] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin [ 0.0616 ] adding BCH for mb2_t234_aligned.bin [ 0.0642 ] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin [ 0.0769 ] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin [ 0.0773 ] adding BCH for mb2_t234_aligned.bin [ 0.0918 ] Filling MB1 storage info [ 0.0919 ] Parsing dev params for multi chains [ 0.0993 ] Generating br-bct [ 0.1004 ] Updating dev and MSS params in BR BCT [ 0.1006 ] tegrabct_v2 --dev_param tegra234-br-bct-diag-boot_cpp.dtb --brbct br_bct.cfg --chip 0x23 0 [ 0.1020 ] Updating bl info [ 0.1031 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.xml.bin [ 0.1041 ] WARNING: boot chain is not completed. set to 0 [ 0.1050 ] Generating signatures [ 0.1067 ] tegrasign_v3.py --key None --list images_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.1070 ] Assuming zero filled SBK key [ 0.1205 ] Warning: pub_key.key is not found [ 0.1193 ] Parsing dev params for multi chains [ 0.1193 ] Generating br-bct [ 0.1203 ] Updating dev and MSS params in BR BCT [ 0.1205 ] tegrabct_v2 --dev_param tegra234-br-bct-diag-boot_cpp.dtb --brbct br_bct.cfg --chip 0x23 0 [ 0.1218 ] Updating bl info [ 0.1228 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.xml.bin --updatesig images_list_signed.xml [ 0.1238 ] WARNING: boot chain is not completed. set to 0 [ 0.1250 ] Get Signed section of bct [ 0.1261 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --listbct bct_list.xml [ 0.1272 ] Signing BCT [ 0.1289 ] tegrasign_v3.py --key None --list bct_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.1292 ] Assuming zero filled SBK key [ 0.1323 ] Sha saved in br_bct_BR.sha [ 0.1327 ] Warning: pub_key.key is not found [ 0.1311 ] Updating BCT with signature [ 0.1321 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesig bct_list_signed.xml [ 0.1331 ] Offset :4608 Len :3584 [ 0.1337 ] Generating SHA2 Hash [ 0.1354 ] tegrasign_v3.py --key None --list bct_list.xml --sha sha512 [ 0.1357 ] Assuming zero filled SBK key [ 0.1357 ] Assuming zero filled SBK key [ 0.1389 ] Sha saved in br_bct_BR.sha [ 0.1377 ] Updating BCT with SHA2 Hash [ 0.1387 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesha bct_list_signed.xml [ 0.1397 ] Offset :4608 Len :3584 [ 0.1400 ] Offset :68 Len :8124 [ 0.1403 ] Generating coldboot mb1-bct [ 0.1414 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct.cfg --misc tegra234-mb1-bct-misc-p3767-0000_cpp.dtb --device tegra234-mb1-bct-device-p3767-0000_cpp.dtb [ 0.1424 ] MB1-BCT version: 0.10 [ 0.1427 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.1432 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.1436 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.1440 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.1442 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.1442 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.1442 ] ERROR: /misc/tsc_controls/tsc_locking_config is not supported [ 0.1442 ] ERROR: /misc/tsc_controls/tsc_locking_diff_configuration is not supported [ 0.1442 ] ERROR: /misc/tsc_controls/tsc_locking_ref_frequency_configuration is not supported [ 0.1442 ] ERROR: /misc/tsc_controls/tsc_locking_control is not supported [ 0.1442 ] ERROR: /misc/tsc_controls/tsc_locking_adjust_configuration is not supported [ 0.1442 ] ERROR: /misc/tsc_controls/tsc_locking_fast_adjust_configuration is not supported [ 0.1442 ] ERROR: /misc/tsc_controls/tsc_locking_adjust_delta_control is not supported [ 0.1442 ] ERROR: /misc/tsc_controls/tsc_capture_control_ptx is not supported [ 0.1442 ] ERROR: /misc/tsc_controls/tsc_capture_config_ptx is not supported [ 0.1442 ] ERROR: /misc/tsc_controls/tsc_stscrsr is not supported [ 0.1442 ] ERROR: /misc/tsc_controls/tsc_locking_adjust_num_control is not supported [ 0.1442 ] [ 0.1442 ] Parsing config file :tegra234-mb1-bct-device-p3767-0000_cpp.dtb [ 0.1442 ] Added Platform Config 9 data with size :- 100 [ 0.1442 ] [ 0.1443 ] Updating mb1-bct with firmware information [ 0.1454 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct_MB1.bct --updatefwinfo readinfo_t234_min_prod.xml.bin [ 0.1479 ] tegrahost_v2 --chip 0x23 0 --align mb1_cold_boot_bct_MB1_aligned.bct [ 0.1500 ] tegrahost_v2 --chip 0x23 0 --magicid MBCT --appendsigheader mb1_cold_boot_bct_MB1_aligned.bct zerosbk [ 0.1509 ] adding BCH for mb1_cold_boot_bct_MB1_aligned.bct [ 0.1535 ] tegrasign_v3.py --key None --list mb1_cold_boot_bct_MB1_aligned_sigheader.bct_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.1538 ] Assuming zero filled SBK key [ 0.1559 ] Warning: pub_key.key is not found [ 0.1554 ] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_cold_boot_bct_MB1_aligned_sigheader.bct.encrypt mb1_cold_boot_bct_MB1_aligned_sigheader.bct.hash zerosbk [ 0.1571 ] Generating recovery mb1-bct [ 0.1581 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_bct.cfg --misc tegra234-mb1-bct-misc-p3767-0000_cpp.dtb --device tegra234-mb1-bct-device-p3767-0000_cpp.dtb [ 0.1591 ] MB1-BCT version: 0.10 [ 0.1593 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.1599 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.1603 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.1608 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.1609 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.1609 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.1610 ] ERROR: /misc/tsc_controls/tsc_locking_config is not supported [ 0.1610 ] ERROR: /misc/tsc_controls/tsc_locking_diff_configuration is not supported [ 0.1610 ] ERROR: /misc/tsc_controls/tsc_locking_ref_frequency_configuration is not supported [ 0.1610 ] ERROR: /misc/tsc_controls/tsc_locking_control is not supported [ 0.1610 ] ERROR: /misc/tsc_controls/tsc_locking_adjust_configuration is not supported [ 0.1610 ] ERROR: /misc/tsc_controls/tsc_locking_fast_adjust_configuration is not supported [ 0.1610 ] ERROR: /misc/tsc_controls/tsc_locking_adjust_delta_control is not supported [ 0.1610 ] ERROR: /misc/tsc_controls/tsc_capture_control_ptx is not supported [ 0.1610 ] ERROR: /misc/tsc_controls/tsc_capture_config_ptx is not supported [ 0.1610 ] ERROR: /misc/tsc_controls/tsc_stscrsr is not supported [ 0.1610 ] ERROR: /misc/tsc_controls/tsc_locking_adjust_num_control is not supported [ 0.1610 ] [ 0.1610 ] Parsing config file :tegra234-mb1-bct-device-p3767-0000_cpp.dtb [ 0.1610 ] Added Platform Config 9 data with size :- 100 [ 0.1610 ] [ 0.1611 ] Updating mb1-bct with firmware information [ 0.1621 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_bct_MB1.bct --recov --updatefwinfo readinfo_t234_min_prod.xml.bin [ 0.1646 ] tegrahost_v2 --chip 0x23 0 --align mb1_bct_MB1_aligned.bct [ 0.1667 ] tegrahost_v2 --chip 0x23 0 --magicid MBCT --appendsigheader mb1_bct_MB1_aligned.bct zerosbk [ 0.1676 ] adding BCH for mb1_bct_MB1_aligned.bct [ 0.1703 ] tegrasign_v3.py --key None --list mb1_bct_MB1_aligned_sigheader.bct_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.1705 ] Assuming zero filled SBK key [ 0.1725 ] Warning: pub_key.key is not found [ 0.1720 ] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_bct_MB1_aligned_sigheader.bct.encrypt mb1_bct_MB1_aligned_sigheader.bct.hash zerosbk [ 0.1737 ] Error: Skip generating mem_bct because sdram_config is not defined [ 0.1737 ] Error: Skip generating mem_bct because sdram_config is not defined [ 0.1737 ] Copying signatures [ 0.1747 ] tegrahost_v2 --chip 0x23 0 --partitionlayout readinfo_t234_min_prod.xml.bin --updatesig images_list_signed.xml [ 0.1805 ] mb1_t234_prod_aligned_sigheader.bin.encrypt filename is from images_list [ 0.1807 ] psc_bl1_t234_prod_aligned_sigheader.bin.encrypt filename is from images_list [ 0.1807 ] Boot Rom communication [ 0.1820 ] tegrarcm_v2 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt [ 0.1830 ] BR_CID: 0x80012344705DE6406C00000017010140 [ 0.2101 ] Sending bct_br [ 0.2537 ] Sending mb1 [ 0.2548 ] Sending psc_bl1 [ 0.2656 ] Sending bct_mb1 [ 0.2717 ] Boot Rom communication completed [ 0.2763 ] tegrahost_v2 --chip 0x23 0 --align applet_t234_aligned.bin [ 0.2828 ] tegrahost_v2 --chip 0x23 0 --magicid MB2A --appendsigheader applet_t234_aligned.bin zerosbk [ 0.2859 ] adding BCH for applet_t234_aligned.bin [ 0.3144 ] tegrasign_v3.py --key None --list applet_t234_aligned_sigheader.bin_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.3149 ] Assuming zero filled SBK key [ 0.3193 ] Warning: pub_key.key is not found [ 0.3197 ] tegrahost_v2 --chip 0x23 0 --updatesigheader applet_t234_aligned_sigheader.bin.encrypt applet_t234_aligned_sigheader.bin.hash zerosbk [ 0.3235 ] Sending mb2_applet... [ 0.3253 ] tegrarcm_v2 --chip 0x23 0 --pollbl --download applet applet_t234_sigheader.bin.encrypt [ 0.3269 ] BL: version 0.32.0.0-t234-54845784-57325615 last_boot_error: 656573201 [ 0.4838 ] Sending applet [ 0.5104 ] ERROR: might be timeout in USB write. Error: Return value 3 Command tegrarcm_v2 --chip 0x23 0 --pollbl --download applet applet_t234_sigheader.bin.encrypt Reading board information failed. Error: failed to generate images Cleaning up... hmecd001409@DSC:~/BSP/flashdir/Linux_for_Tegra$