sudo ./flash.sh jetson-agx-orin-devkit mmcblk0p ############################################################################### # L4T BSP Information: # R35 , REVISION: 2.1 # User release: 0.0 ############################################################################### # Target Board Information: # Name: jetson-agx-orin-devkit, Board Family: t186ref, SoC: Tegra 234, # OpMode: production, Boot Authentication: NS, # Disk encryption: disabled , ############################################################################### copying emc_fuse_dev_params(/home/dipak/sources_orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra234-br-bct-diag-boot.dts)... done. copying device_config(/home/dipak/sources_orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra234-mb1-bct-device-p3701-0000.dts)... done. copying misc_config(/home/dipak/sources_orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra234-mb1-bct-misc-p3701-0000.dts)... done. ./tegraflash.py --chip 0x23 --applet "/home/dipak/sources_orin/Linux_for_Tegra/bootloader/mb1_t234_prod.bin" --skipuid --cfg readinfo_t234_min_prod.xml --dev_params tegra234-br-bct-diag-boot.dts --device_config tegra234-mb1-bct-device-p3701-0000.dts --misc_config tegra234-mb1-bct-misc-p3701-0000.dts --bins "mb2_applet applet_t234.bin" --cmd "dump eeprom cvm cvm.bin; dump custinfo custinfo_out.bin; reboot recovery" Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0152 ] tegrarcm_v2 --chip 0x23 0 --ismb2applet [ 0.0154 ] File rcm_state open failed [ 0.0156 ] ERROR: failed to read rcm_state [ 0.0157 ] [ 0.0189 ] tegrasign_v3.py --key None --getmode mode.txt [ 0.0190 ] Assuming zero filled SBK key [ 0.0160 ] Pre-processing config: tegra234-mb1-bct-device-p3701-0000.dts [ 0.0315 ] Pre-processing config: tegra234-mb1-bct-misc-p3701-0000.dts [ 0.0521 ] Parsing partition layout [ 0.0535 ] tegraparser_v2 --pt readinfo_t234_min_prod.xml.tmp [ 0.0565 ] Kernel DTB used: None [ 0.0566 ] WARNING: dce base dtb is not provided [ 0.0566 ] Parsing partition layout [ 0.0578 ] tegraparser_v2 --pt readinfo_t234_min_prod.xml.tmp [ 0.0590 ] Creating list of images to be signed [ 0.0641 ] tegrahost_v2 --chip 0x23 0 --partitionlayout readinfo_t234_min_prod.xml.bin --list images_list.xml zerosbk [ 0.0654 ] MB1: Nvheader already present is mb1_t234_prod_aligned.bin [ 0.0687 ] Header already present for mb1_t234_prod_aligned_sigheader.bin [ 0.0690 ] MB1: Nvheader already present is mb1_t234_prod_aligned.bin [ 0.0751 ] Header already present for mb1_t234_prod_aligned_sigheader.bin [ 0.0756 ] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin [ 0.0899 ] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin [ 0.0902 ] adding BCH for mb2_t234_aligned.bin [ 0.0948 ] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin [ 0.1175 ] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin [ 0.1178 ] adding BCH for mb2_t234_aligned.bin [ 0.1426 ] Filling MB1 storage info [ 0.1427 ] Parsing dev params for multi chains [ 0.1560 ] Generating br-bct [ 0.1573 ] Updating dev and MSS params in BR BCT [ 0.1573 ] tegrabct_v2 --dev_param tegra234-br-bct-diag-boot_cpp.dtb --brbct br_bct.cfg --chip 0x23 0 [ 0.1644 ] Updating bl info [ 0.1651 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.xml.bin [ 0.1656 ] WARNING: boot chain is not completed. set to 0 [ 0.1667 ] Generating signatures [ 0.1699 ] tegrasign_v3.py --key None --list images_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.1701 ] Assuming zero filled SBK key [ 0.1907 ] Warning: pub_key.key is not found [ 0.1878 ] Parsing dev params for multi chains [ 0.1879 ] Generating br-bct [ 0.1884 ] Updating dev and MSS params in BR BCT [ 0.1885 ] tegrabct_v2 --dev_param tegra234-br-bct-diag-boot_cpp.dtb --brbct br_bct.cfg --chip 0x23 0 [ 0.1923 ] Updating bl info [ 0.1931 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.xml.bin --updatesig images_list_signed.xml [ 0.1935 ] WARNING: boot chain is not completed. set to 0 [ 0.1957 ] Get Signed section of bct [ 0.1962 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --listbct bct_list.xml [ 0.1973 ] Signing BCT [ 0.2004 ] tegrasign_v3.py --key None --list bct_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.2006 ] Assuming zero filled SBK key [ 0.2039 ] Sha saved in br_bct_BR.sha [ 0.2047 ] Warning: pub_key.key is not found [ 0.2016 ] Updating BCT with signature [ 0.2026 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesig bct_list_signed.xml [ 0.2034 ] Offset :4608 Len :3584 [ 0.2039 ] Generating SHA2 Hash [ 0.2071 ] tegrasign_v3.py --key None --list bct_list.xml --sha sha512 [ 0.2074 ] Assuming zero filled SBK key [ 0.2074 ] Assuming zero filled SBK key [ 0.2108 ] Sha saved in br_bct_BR.sha [ 0.2080 ] Updating BCT with SHA2 Hash [ 0.2085 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesha bct_list_signed.xml [ 0.2088 ] Offset :4608 Len :3584 [ 0.2094 ] Offset :68 Len :8124 [ 0.2097 ] Generating coldboot mb1-bct [ 0.2101 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct.cfg --misc tegra234-mb1-bct-misc-p3701-0000_cpp.dtb --device tegra234-mb1-bct-device-p3701-0000_cpp.dtb [ 0.2103 ] MB1-BCT version: 0.9 [ 0.2105 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.2110 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.2112 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.2114 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.2117 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.2119 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.2119 ] [ 0.2119 ] Parsing config file :tegra234-mb1-bct-device-p3701-0000_cpp.dtb [ 0.2119 ] Added Platform Config 9 data with size :- 100 [ 0.2119 ] [ 0.2119 ] Updating mb1-bct with firmware information [ 0.2124 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct_MB1.bct --updatefwinfo readinfo_t234_min_prod.xml.bin [ 0.2139 ] tegrahost_v2 --chip 0x23 0 --align mb1_cold_boot_bct_MB1_aligned.bct [ 0.2146 ] tegrahost_v2 --chip 0x23 0 --magicid MBCT --appendsigheader mb1_cold_boot_bct_MB1_aligned.bct zerosbk [ 0.2149 ] adding BCH for mb1_cold_boot_bct_MB1_aligned.bct [ 0.2192 ] tegrasign_v3.py --key None --list mb1_cold_boot_bct_MB1_aligned_sigheader.bct_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.2194 ] Assuming zero filled SBK key [ 0.2245 ] Warning: pub_key.key is not found [ 0.2220 ] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_cold_boot_bct_MB1_aligned_sigheader.bct.encrypt mb1_cold_boot_bct_MB1_aligned_sigheader.bct.hash zerosbk [ 0.2234 ] Generating recovery mb1-bct [ 0.2239 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_bct.cfg --misc tegra234-mb1-bct-misc-p3701-0000_cpp.dtb --device tegra234-mb1-bct-device-p3701-0000_cpp.dtb [ 0.2244 ] MB1-BCT version: 0.9 [ 0.2245 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.2251 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.2253 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.2256 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.2260 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.2260 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.2260 ] [ 0.2260 ] Parsing config file :tegra234-mb1-bct-device-p3701-0000_cpp.dtb [ 0.2260 ] Added Platform Config 9 data with size :- 100 [ 0.2260 ] [ 0.2261 ] Updating mb1-bct with firmware information [ 0.2269 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_bct_MB1.bct --recov --updatefwinfo readinfo_t234_min_prod.xml.bin [ 0.2292 ] tegrahost_v2 --chip 0x23 0 --align mb1_bct_MB1_aligned.bct [ 0.2310 ] tegrahost_v2 --chip 0x23 0 --magicid MBCT --appendsigheader mb1_bct_MB1_aligned.bct zerosbk [ 0.2316 ] adding BCH for mb1_bct_MB1_aligned.bct [ 0.2358 ] tegrasign_v3.py --key None --list mb1_bct_MB1_aligned_sigheader.bct_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.2360 ] Assuming zero filled SBK key [ 0.2374 ] Warning: pub_key.key is not found [ 0.2347 ] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_bct_MB1_aligned_sigheader.bct.encrypt mb1_bct_MB1_aligned_sigheader.bct.hash zerosbk [ 0.2357 ] Error: Skip generating mem_bct because sdram_config is not defined [ 0.2357 ] Error: Skip generating mem_bct because sdram_config is not defined [ 0.2357 ] Copying signatures [ 0.2361 ] tegrahost_v2 --chip 0x23 0 --partitionlayout readinfo_t234_min_prod.xml.bin --updatesig images_list_signed.xml [ 0.2424 ] mb1_t234_prod_aligned_sigheader.bin.encrypt filename is from images_list [ 0.2426 ] psc_bl1_t234_prod_aligned_sigheader.bin.encrypt filename is from images_list [ 0.2426 ] Boot Rom communication [ 0.2431 ] tegrarcm_v2 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt [ 0.2434 ] BR_CID: 0x80012344705DD3570400000015FE8100 [ 0.2602 ] Sending bct_br [ 0.2603 ] ERROR: might be timeout in USB write. Error: Return value 3 Command tegrarcm_v2 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt Reading board information failed.