▒▒
[0005.910] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses.
[0005.918] I> MB1 (prd-version: 2.2.0.0-t194-41334769-3540ffaa)
[0005.923] I> Boot-mode: Platform RCM
[0005.927] I> Platform: Silicon
[0005.929] I> Chip revision : A02P
[0005.932] I> Bootrom patch version : 15 (correctly patched)
[0005.938] I> ATE fuse revision : 0x200
[0005.941] I> Ram repair fuse : 0x0
[0005.944] I> Ram Code : 0x2
[0005.947] I> rst_source: 0x0, rst_level: 0x0
[0005.952] I> USB configuration success
[0008.040] I> mb2 image downloaded
[0008.066] I> Recovery boot mode 0
[0008.071] I> UPHY full init done
[0008.078] I> MB1 done

[0008.083] I> Welcome to MB2(TBoot-BPMP) Applet (version: default.t194-mobile-a1105112)
[0008.090] I> DMA Heap @ [0x40020000 - 0x40065800]
[0008.095] I> Default Heap @ [0xd486400 - 0xd48a400]
[0008.099] W> Profiler not initialized
[0008.171] I> sdmmc DDR50 mode
[0008.175] E> SPI_FLASH: Invalid value device id: 7.
[0008.179] I> QSPI Flash is not present.
[0008.185] E> CLK_RST: instance 6 not found in module 44.
[0008.190] E> MPhy CAR configuration failed error = 1747992077
[0008.196] E> UFS initialization failed
[0008.199] I> UFS is not present
[0008.205] I> Found 17 partitions in SDMMC_BOOT (instance 3)
[0008.215] I> Found 42 partitions in SDMMC_USER (instance 3)
[0008.220] W> Profiler not initialized
[0008.223] I> Entering 3p server
[0008.226] I> USB configuration success
[0009.184] I> Populate chip info
[0009.228] I> Populate eeprom info
[0009.232] I> Populate eeprom info for module cvm
[0009.237]  > DEVICE_PROD: device prod is not initialized.
[0009.295] I> Rebooting : reboot-recovery


[0009.300] I> Reset to recovery mode
▒▒
[0013.402] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses.
[0013.410] I> MB1 (prd-version: 2.2.0.0-t194-41334769-3540ffaa)
[0013.416] I> Boot-mode: RCM
[0013.418] I> Platform: Silicon
[0013.421] I> Chip revision : A02P
[0013.424] I> Bootrom patch version : 15 (correctly patched)
[0013.429] I> ATE fuse revision : 0x200
[0013.433] I> Ram repair fuse : 0x0
[0013.436] I> Ram Code : 0x2
[0013.438] I> rst_source: 0xb, rst_level: 0x1
[0013.444] I> USB configuration success
[0015.450] I> bct_bootrom image downloaded
[0015.459] W> PROD_CONFIG: device prod data is empty in MB1 BCT.
[0015.466] I> Temperature = 36000
[0015.469] W> Skipping boost for clk: BPMP_CPU_NIC
[0015.473] W> Skipping boost for clk: BPMP_APB
[0015.477] W> Skipping boost for clk: AXI_CBB
[0015.481] W> Skipping boost for clk: AON_CPU_NIC
[0015.486] W> Skipping boost for clk: CAN1
[0015.489] W> Skipping boost for clk: CAN2
[0015.494] I> Boot-device: SDMMC (instance: 3)
[0015.498] I> bct_mb1 image downloaded
[0015.508] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000
[0015.516] W>  Thermal config not found in BCT
[0015.524] W>  MEMIO rail config not found in BCT
[0015.540] I> bct_mem image downloaded
[0016.921] I> blob image downloaded
[0016.953] I> Recovery boot mode 0
[0016.997] W>  Platform config not found in BCT
[0017.030] I> MB1 done

▒▒▒▒main enter
SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27
HW Function test
Start Scheduler.
in late init
▒▒
  [0017.040] I> Welcome to MB2(TBoot-BPMP) Recovery (version: default.t194-mobile-85062811)
[0017.040] I> DMA Heap @ [0x526fa000 - 0x52ffa000]
[0017.041] I> Default Heap @ [0xd486400 - 0xd48a400]
[0017.043] E> DEVICE_PROD: Invalid value data = 70020000, size = 0.
[0017.048] W> device prod register failed
[0017.062] I> Relocating BR-BCT
[0017.063]  > DEVICE_PROD: device prod is not initialized.
[0017.089] E> I2C: slave not found in slaves.
[0017.090] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true.
[0017.091] E> I2C_DEV: Failed to send register address 0x00000000.
[0017.092] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0.
[0017.093] E> eeprom: Failed to read I2C slave device
[0017.096] I> Failed to read CVB eeprom data @ AE
[0017.101] I> Retrying CVB eeprom read @ AC ...
[0017.105] E> I2C: slave not found in slaves.
[0017.109] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true.
[0017.117] E> I2C_DEV: Failed to send register address 0x00000000.
[0017.123] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0.
[0017.132] E> eeprom: Failed to read I2C slave device
[0017.137] I> Failed to read CVB eeprom data @ AC
[0017.141] E> Error getting EEPROM data!
[0017.145] E> cpubl: Parallel task execution failed
[0017.149] I> mb2_load_authenticate_binaries done: execution failed
[0017.155] I> nvtboot_boot done: execution failed
[0017.160] E> Top caller module: EEPROM, error module: I2C, reason: 0x0d, aux_info: 0x05
[0017.168] I> Reset to recovery mode
[0017.1