[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (root@skyangel) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #4 SMP PREEMPT Thu Feb 10 11:50:39 CST 2022 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a06b2000 [ 0.000000] Found lut_mem: 00002008@a06af000 [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2031101 [ 0.000000] DMA zone: 7160 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 458237 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1999365 [ 0.000000] Kernel command line: console=ttyTCU0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06b2000 lut_mem=0x2008@0xa06af000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29988(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7182596K/8124404K available (15358K kernel code, 2956K rwdata, 6640K rodata, 8640K init, 612K bss, 188144K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009600000 ( 6656 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e70000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e70000 - 0xffffff800a153008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a153008 - 0xffffff800a1ec0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.008486] Console: colour dummy device 80x25 [ 0.012452] console [tty0] enabled [ 0.015838] bootconsole [tegra_comb_uart0] disabled [ 0.020850] kmemleak: Kernel memory leak detector disabled [ 0.020883] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.020919] pid_max: default: 32768 minimum: 301 [ 0.022007] Security Framework initialized [ 0.022565] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022615] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.024096] ftrace: allocating 47077 entries in 184 pages [ 0.427217] sched-energy: Sched-energy-costs installed from DT [ 0.427279] ASID allocator initialised with 65536 entries [ 0.462151] tegra-id: chipid=21917. [ 0.462176] tegra-id: opt_subrevision=1. [ 0.462212] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.462258] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000-qai300.dts [ 0.462311] DTB Build time: Feb 10 2022 14:42:02 [ 0.510382] CPU1: Booted secondary processor [4e0f0040] [ 0.542443] CPU2: Booted secondary processor [4e0f0040] [ 0.574544] CPU3: Booted secondary processor [4e0f0040] [ 0.606852] CPU4: Booted secondary processor [4e0f0040] [ 0.638926] CPU5: Booted secondary processor [4e0f0040] [ 0.639110] Brought up 6 CPUs [ 0.639256] SMP: Total of 6 processors activated. [ 0.639288] CPU features: detected feature: Privileged Access Never [ 0.639313] CPU features: detected feature: LSE atomic instructions [ 0.639358] CPU features: detected feature: User Access Override [ 0.639388] CPU features: detected feature: 32-bit EL0 Support [ 0.640903] CPU: All CPU(s) started at EL2 [ 0.640968] alternatives: patching kernel code [ 0.647436] devtmpfs: initialized [ 0.684547] Initilizing CustomIPI irq domain [ 0.684787] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.684815] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.697852] pinctrl core: initialized pinctrl subsystem [ 0.698084] OS set in device tree is not L4T. [ 0.698329] regulator-dummy: no parameters [ 0.698545] Initializing plugin-manager [ 0.698615] Plugin module not found [ 0.698662] Plugin-manager status disabled [ 0.699722] NET: Registered protocol family 16 [ 0.700983] pstore: using zlib compression [ 0.701684] console [pstore-1] enabled [ 0.701705] pstore: Registered ramoops as persistent store backend [ 0.701727] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.717921] cpuidle: using governor menu [ 0.719086] bpmp: waiting for handshake [ 0.719116] bpmp: handshake completed [ 0.719149] bpmp: synchronizing channels [ 0.719175] bpmp: channels synchronized [ 0.719218] bpmp: mail init ok [ 0.722080] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.722292] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.722314] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.722335] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.722353] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.722395] t19x-arm-smmu 12000000.iommu: nested translation [ 0.722416] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.722442] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.722486] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.722506] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.722544] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.726550] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e74000) [ 0.726603] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.729151] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.730762] tegra_aon_clk_init: ok [ 0.730796] Registering BPMP clocks... [ 0.730910] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.731575] Serial: AMBA PL011 UART driver [ 0.731740] tegra_powergate_init: DONE [ 0.731772] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000-qai300.dts [ 0.731805] DTB Build time: Feb 10 2022 14:42:02 [ 0.734745] Tegra reboot handler registered. [ 0.743075] iommu: Adding device 14160000.pcie to group 0 [ 0.743784] iommu: Adding device 141a0000.pcie to group 1 [ 0.745344] iommu: Adding device 2490000.ether_qos to group 2 [ 0.745980] iommu: Adding device 3100000.serial to group 3 [ 0.746563] iommu: Adding device 3110000.serial to group 4 [ 0.747036] iommu: Adding device 3140000.serial to group 5 [ 0.747723] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.748045] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.748099] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.748137] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.748165] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.748235] tegra-pmc: PMC Prod config success [ 0.748449] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.748493] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.748848] iommu: Adding device 3460000.sdhci to group 6 [ 0.749383] iommu: Adding device 3440000.sdhci to group 7 [ 0.749966] iommu: Adding device 3210000.spi to group 8 [ 0.750430] iommu: Adding device 3230000.spi to group 9 [ 0.750847] iommu: Adding device 3270000.spi to group 10 [ 0.752025] iommu: Adding device 3160000.i2c to group 11 [ 0.752479] iommu: Adding device c240000.i2c to group 12 [ 0.753109] iommu: Adding device 3180000.i2c to group 13 [ 0.753753] iommu: Adding device 3190000.i2c to group 14 [ 0.754418] iommu: Adding device 31b0000.i2c to group 15 [ 0.754875] iommu: Adding device 31c0000.i2c to group 16 [ 0.755404] iommu: Adding device c250000.i2c to group 17 [ 0.755889] iommu: Adding device 31e0000.i2c to group 18 [ 0.756465] iommu: Adding device sound to group 19 [ 0.757030] iommu: Adding device 3510000.hda to group 20 [ 0.757640] iommu: Adding device bc00000.rtcpu to group 21 [ 0.759549] iommu: Adding device 13e10000.host1x to group 22 [ 0.760089] iommu: Adding device 13e10000.host1x:ctx0 to group 23 [ 0.760564] iommu: Adding device 13e10000.host1x:ctx1 to group 24 [ 0.761061] iommu: Adding device 13e10000.host1x:ctx2 to group 25 [ 0.761541] iommu: Adding device 13e10000.host1x:ctx3 to group 26 [ 0.761939] iommu: Adding device 13e10000.host1x:ctx4 to group 27 [ 0.762889] iommu: Adding device 13e10000.host1x:ctx5 to group 28 [ 0.763329] iommu: Adding device 13e10000.host1x:ctx6 to group 29 [ 0.763753] iommu: Adding device 13e10000.host1x:ctx7 to group 30 [ 0.764404] iommu: Adding device 15340000.vic to group 31 [ 0.764856] iommu: Adding device 15380000.nvjpg to group 32 [ 0.765159] iommu: Adding device 15500000.tsec to group 33 [ 0.765462] iommu: Adding device 15100000.tsecb to group 34 [ 0.765760] iommu: Adding device 15480000.nvdec to group 35 [ 0.766084] iommu: Adding device 15140000.nvdec1 to group 36 [ 0.766448] iommu: Adding device 154c0000.nvenc to group 37 [ 0.766745] iommu: Adding device 15a80000.nvenc1 to group 38 [ 0.767215] iommu: Adding device 15880000.nvdla0 to group 39 [ 0.767643] iommu: Adding device 158c0000.nvdla1 to group 40 [ 0.768240] iommu: Adding device 15200000.nvdisplay to group 41 [ 0.768459] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06b2000(800000) [ 0.768492] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06af000(3000) [ 0.772533] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.772639] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.773520] iommu: Adding device 15210000.nvdisplay to group 42 [ 0.773614] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.775364] iommu: Adding device 15c10000.vi to group 43 [ 0.775596] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.776040] iommu: Adding device 14800000.isp to group 44 [ 0.777049] iommu: Adding device 16000000.pva0 to group 45 [ 0.777602] iommu: Adding device 16800000.pva1 to group 46 [ 0.778080] iommu: Adding device 15810000.se to group 47 [ 0.778499] iommu: Adding device 15820000.se to group 48 [ 0.778799] iommu: Adding device 15830000.se to group 49 [ 0.779108] iommu: Adding device 15840000.se to group 50 [ 0.779411] iommu: Adding device c1a0000.aon to group 51 [ 0.781159] iommu: Adding device d000000.bpmp to group 52 [ 0.781527] bpmp: ping status is 0 [ 0.781671] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.784905] bpmp d000000.bpmp: probe ok [ 0.786612] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.787264] iommu: Adding device smmu_test to group 53 [ 0.788549] mc: mapped MMIO address: 0xffffff800a5c0000 -> 0x2c10000 [ 0.788613] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c20000 [ 0.788670] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c30000 [ 0.788725] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c40000 [ 0.788780] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c50000 [ 0.788835] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2b80000 [ 0.788902] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2b90000 [ 0.788977] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2ba0000 [ 0.789031] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2bb0000 [ 0.789082] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x1700000 [ 0.789140] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1710000 [ 0.789187] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1720000 [ 0.789233] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1730000 [ 0.789279] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1740000 [ 0.789337] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1750000 [ 0.789384] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1760000 [ 0.789449] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1770000 [ 0.789556] mc-err: mcerr ops are set to t19x [ 0.795845] iommu: Adding device 2600000.dma to group 54 [ 0.801107] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.802463] GPIO line 339 (wifi-enable) hogged as output/high [ 0.802776] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.811400] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.811520] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.811577] GPIO line 266 (w-disable1) hogged as output/high [ 0.811630] GPIO line 264 (w-disable2) hogged as output/high [ 0.811704] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.812074] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.814704] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.814733] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.814784] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.815806] iommu: Adding device 3550000.xudc to group 55 [ 0.816575] iommu: Adding device 3610000.xhci to group 56 [ 0.818889] arm64_ras arm64_ras: probed [ 0.819397] ras_fhi_enable: FHI 469 enabled on CPU0 [ 0.819457] ras_fhi_enable: FHI 470 enabled on CPU1 [ 0.819548] ras_fhi_enable: FHI 471 enabled on CPU2 [ 0.819636] ras_fhi_enable: FHI 472 enabled on CPU3 [ 0.819712] ras_fhi_enable: FHI 473 enabled on CPU4 [ 0.819797] ras_fhi_enable: FHI 474 enabled on CPU5 [ 0.820027] carmel_ras_enable: RAS enabled on cpu0 [ 0.820216] carmel_ras_enable: RAS enabled on cpu1 [ 0.820434] carmel_ras_enable: RAS enabled on cpu2 [ 0.820630] carmel_ras_enable: RAS enabled on cpu3 [ 0.820853] carmel_ras_enable: RAS enabled on cpu4 [ 0.821055] carmel_ras_enable: RAS enabled on cpu5 [ 0.821139] carmel_ras carmel_ras: probed [ 0.822445] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 478, noc_nonsecure_irq = 477> [ 0.823079] tegra-cbb c600000.aon-noc: noc_secure_irq = 480, noc_nonsecure_irq = 479> [ 0.824120] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 482, noc_nonsecure_irq = 481> [ 0.825349] tegra-cbb be00000.rce-noc: noc_secure_irq = 484, noc_nonsecure_irq = 483> [ 0.826389] tegra-cbb b600000.sce-noc: noc_secure_irq = 486, noc_nonsecure_irq = 485> [ 0.826871] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.828376] vdd-ac-bat: 5000 mV [ 0.828838] vdd-sdmmc1-sw: 3300 mV [ 0.829194] vdd-1v8-sd: 1800 mV [ 0.829609] vdd-3v3-cvb: 3300 mV [ 0.829960] vdd-1v8-cvb: 1800 mV [ 0.830358] vdd-epb-1v0: 1000 mV [ 0.830644] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.830983] avdd-cam-2v8: 2800 mV [ 0.831350] vdd-fan: 5000 mV [ 0.831747] vdd-hdmi-5v0: 5000 mV [ 0.832146] vdd_sys_en: 1200 mV [ 0.865283] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.870726] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.871086] SCSI subsystem initialized [ 0.871302] libata version 3.00 loaded. [ 0.871559] usbcore: registered new interface driver usbfs [ 0.871633] usbcore: registered new interface driver hub [ 0.871708] usbcore: registered new device driver usb [ 0.882914] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.886343] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.892701] vdd-1v0: at 1000 mV [ 0.896702] vdd-1v8-hs: at 1800 mV [ 0.900751] vdd-1v8-ls: at 1800 mV [ 0.904746] vdd-1v8-ao: at 1800 mV [ 0.908766] vddio-ddr-1v1: at 1100 mV [ 0.912546] vdd-rtc: at 800 mV [ 0.913826] spmic-ldo1: at 2375 mV [ 0.920599] vdd-ao-3v3: at 3300 mV [ 0.928638] vddio-emmc-3v3: at 3300 mV [ 0.929934] spmic-ldo4: at 1587 mV [ 0.936688] vdd-usb-3v3: at 3300 mV [ 0.944726] vddio-sdmmc1-3v3: at 3300 mV [ 0.948746] vdd-csi-1v2: at 1200 mV [ 0.950315] spmic-ldo8: at 1800 mV [ 0.955206] GPIO line 246 (gpio_default) hogged as output/high [ 0.956558] GPIO line 247 (gpio_default) hogged as output/high [ 0.956921] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.957304] max77620 4-003c: max77620 probe successful [ 0.958036] media: Linux media interface: v0.10 [ 0.958106] Linux video capture interface: v2.00 [ 0.959708] pps_core: LinuxPPS API ver. 1 registered [ 0.959730] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.959770] PTP clock support registered [ 0.960106] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.960411] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.960464] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.963369] trusty trusty: trusty version: Built: 12:20:34 Jul 26 2021 [ 0.963454] trusty trusty: selected api version: 3 (requested 3) [ 0.964575] Advanced Linux Sound Architecture Driver Initialized. [ 0.965197] Bluetooth: Core ver 2.22 [ 0.965250] NET: Registered protocol family 31 [ 0.965270] Bluetooth: HCI device and connection manager initialized [ 0.965299] Bluetooth: HCI socket layer initialized [ 0.965325] Bluetooth: L2CAP socket layer initialized [ 0.965370] Bluetooth: SCO socket layer initialized [ 0.970258] camchar: rtcpu character device driver loaded [ 0.970821] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.970940] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.971905] clocksource: Switched to clocksource arch_sys_counter [ 1.018982] VFS: Disk quotas dquot_6.6.0 [ 1.019131] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.019545] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.020795] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.020867] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.021098] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.021121] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.021149] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.021177] nvmap_page_pool_init: Total RAM pages: 1984065 [ 1.021195] nvmap_page_pool_init: nvmap page pool size: 248008 pages (968 MB) [ 1.021365] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.021728] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.024243] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.038336] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.038655] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.038948] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.039164] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.039388] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.040657] la/ptsa driver initialized. [ 1.041083] NET: Registered protocol family 2 [ 1.042016] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.042402] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.043018] TCP: Hash tables configured (established 65536 bind 65536) [ 1.043086] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.043223] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.043621] NET: Registered protocol family 1 [ 1.044215] RPC: Registered named UNIX socket transport module. [ 1.044245] RPC: Registered udp transport module. [ 1.044269] RPC: Registered tcp transport module. [ 1.044290] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.044343] PCI: CLS 0 bytes, default 64 [ 1.044571] Trying to unpack rootfs image as initramfs... [ 1.267484] Freeing initrd memory: 7068K [ 1.285979] random: fast init done [ 1.290039] host1x 13e10000.host1x: initialized [ 1.291797] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.296443] audit: initializing netlink subsys (disabled) [ 1.296525] audit: type=2000 audit(0.904:1): initialized [ 1.297234] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.307832] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.309263] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.309955] 9p: Installing v9fs 9p2000 file system support [ 1.314899] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.315074] io scheduler noop registered [ 1.315353] io scheduler cfq registered (default) [ 1.319346] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.354211] iommu: Adding device 2993000.adsp to group 57 [ 1.409616] iommu: Adding device aconnect@2a41000:adsp_audio to group 58 [ 1.409833] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.423104] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.423698] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.424577] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.425141] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.425618] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.431243] tsec 15500000.tsec: initialized [ 1.432888] tsec 15100000.tsecb: initialized [ 1.436678] nvdec 15480000.nvdec: initialized [ 1.439707] nvdec 15140000.nvdec1: initialized [ 1.445158] falcon 15340000.vic: initialized [ 1.447051] falcon 15380000.nvjpg: initialized [ 1.448857] falcon 154c0000.nvenc: initialized [ 1.450632] falcon 15a80000.nvenc1: initialized [ 1.453667] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.455411] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.456957] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.458503] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.460042] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.461371] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.462823] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.464447] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.467693] t194-nvcsi 15a00000.nvcsi: initialized [ 1.467839] driver not enabled, cannot register any devices [ 1.472894] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.473424] scare-pigeon 14b00000.isp-thi: initialized [ 1.478796] pva 16000000.pva0: initialized [ 1.484506] pva 16800000.pva1: initialized [ 1.489491] nvdla 15880000.nvdla0: initialized [ 1.494241] nvdla 158c0000.nvdla1: initialized [ 1.495700] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.495739] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.495836] tegradccommon 15200000.dc_common: dma mapping done [ 1.496069] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=78 [ 1.496118] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.496389] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.496452] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.496744] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.496777] tegra_cec 3960000.tegra_cec: probed [ 1.497711] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.497826] generic_infoframe_type: 0x87 [ 1.497992] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.498065] tegradc 15200000.nvdisplay: Display dc.ffffff800bce0000 registered with id=0 [ 1.502651] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.502690] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.502716] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.502986] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.503017] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.503824] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.506627] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.506663] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.510231] tegradc 15200000.nvdisplay: probed [ 1.510841] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.511365] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.511400] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.511735] kfuse 3830000.kfuse: initialized [ 1.517063] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.519675] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.521530] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.522785] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 2.503971] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 2.503979] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 3.945795] console [ttyTCU0] enabled [ 3.946177] [drm] Initialized [ 3.946627] Console: switching to colour frame buffer device 240x67 [ 3.958294] tegradc 15200000.nvdisplay: fb registered [ 3.963745] gpio tegra-gpio wake63 for gpio=97(M:1) [ 3.968884] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 3.974798] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 3.980343] brd: module loaded [ 3.988439] Parent Clock set for DC plld2 [ 3.998509] loop: module loaded [ 3.998665] tegra_profiler: version: 1.145, samples/io: 49/28 [ 3.998956] tegra_profiler: auth: init [ 4.000804] THERMAL EST: found 3 subdevs [ 4.004163] THERMAL EST num_resources: 0 [ 4.007801] [THERMAL EST subdev 0] [ 4.011485] [THERMAL EST subdev 1] [ 4.014640] [THERMAL EST subdev 2] [ 4.018313] THERMAL EST: Found 2 profiles, default profile is quiet [ 4.024858] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 4.033468] THERMAL EST: thz register success. [ 4.038043] THERMAL EST: end of probe, return err: 0 [ 4.043522] sd: No Scsi addr parsed to reserve index [ 4.047576] hisi_sas: driver version v1.6 [ 4.049627] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 4.060824] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 4.068954] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 4.070995] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 4.071002] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 4.071010] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 4.071274] 1 ofpart partitions found on MTD device spi6.0 [ 4.071278] Creating 1 MTD partitions on "spi6.0": [ 4.071291] 0x000000000000-0x000002000000 : "Whole_flash0" [ 4.077736] libphy: Fixed MDIO Bus: probed [ 4.079162] tun: Universal TUN/TAP device driver, 1.6 [ 4.079165] tun: (C) 1999-2004 Max Krasnyansky [ 4.080683] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.080687] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.080773] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 4.080776] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.080828] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 4.080832] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 4.080874] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 4.080877] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 4.207831] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4.208024] Extcon AUX1(HDMI) enable [ 4.208587] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 4.208772] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 4.209036] tegradc 15210000.nvdisplay: DT parsed successfully [ 4.213658] tegradc 15210000.nvdisplay: Display dc.ffffff800d1e0000 registered with id=1 [ 4.221975] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 4.227788] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 4.243078] tegradc 15210000.nvdisplay: probed [ 4.243563] tegradc 15210000.nvdisplay: fb registered [ 4.247365] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 4.251417] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 4.259205] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 4.264627] tegradc 15210000.nvdisplay: blank - powerdown [ 4.269704] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 4.278020] Extcon DP: HPD disabled [ 4.281507] hpd: hpd_switch 0 [ 4.284654] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 4.291487] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 4.297788] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 4.327088] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 4.327851] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 15 c2 72 [ 4.328034] Using phyrst_lpmode = 1 from DT [ 4.328284] libphy: dwc_phy: probed [ 4.330685] PPP generic driver version 2.4.2 [ 4.330939] PPP BSD Compression module registered [ 4.335331] PPP Deflate Compression module registered [ 4.340501] PPP MPPE Compression module registered [ 4.345475] NET: Registered protocol family 24 [ 4.345540] tegradc 15200000.nvdisplay: blank - powerdown [ 4.345545] usbcore: registered new interface driver r8152 [ 4.345593] usbcore: registered new interface driver asix [ 4.345637] usbcore: registered new interface driver ax88179_178a [ 4.345675] usbcore: registered new interface driver cdc_ether [ 4.346498] usbcore: registered new interface driver net1080 [ 4.346595] usbcore: registered new interface driver cdc_subset [ 4.346682] usbcore: registered new interface driver zaurus [ 4.346780] usbcore: registered new interface driver cdc_ncm [ 4.347048] VFIO - User Level meta-driver version: 0.3 [ 4.348449] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.348467] ehci-pci: EHCI PCI platform driver [ 4.348501] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.348510] ohci-pci: OHCI PCI platform driver [ 4.348552] ohci-platform: OHCI generic platform driver [ 4.352982] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 4.354878] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f4d39800 id [ 4.355608] usbcore: registered new interface driver uas [ 4.355666] usbcore: registered new interface driver usb-storage [ 4.355796] usbcore: registered new interface driver usbserial [ 4.357258] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 4.357289] tegra-xusb 3610000.xhci: xHCI Host Controller [ 4.357306] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 4.358051] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 4.358106] tegra-xusb 3610000.xhci: irq 464, io mem 0x03610000 [ 4.358286] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.358292] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.358297] usb usb1: Product: xHCI Host Controller [ 4.358301] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 4.358306] usb usb1: SerialNumber: 3610000.xhci [ 4.358863] hub 1-0:1.0: USB hub found [ 4.358930] hub 1-0:1.0: 4 ports detected [ 4.359466] tegra-xusb 3610000.xhci: xHCI Host Controller [ 4.359475] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 4.359483] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 4.359669] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.359675] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.359679] usb usb2: Product: xHCI Host Controller [ 4.359684] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 4.359688] usb usb2: SerialNumber: 3610000.xhci [ 4.360200] hub 2-0:1.0: USB hub found [ 4.360236] hub 2-0:1.0: 4 ports detected [ 4.361110] Wake76 for irq=199 [ 4.361114] Wake77 for irq=199 [ 4.361116] Wake78 for irq=199 [ 4.361120] Wake79 for irq=199 [ 4.361122] Wake80 for irq=199 [ 4.361124] Wake81 for irq=199 [ 4.361127] Wake82 for irq=199 [ 4.361178] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 4.361185] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 4.362237] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 4.362328] tegra-xudc-new 3550000.xudc: device count: 1 [ 4.363240] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 4.363260] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 4.363465] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 4.363473] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 4.364127] mousedev: PS/2 mouse device common for all mice [ 4.364207] usbcore: registered new interface driver xpad [ 4.383487] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 4.383491] Extcon AUX1(HDMI) disable [ 4.409180] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 4.410364] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 4.429664] tegradc 15200000.nvdisplay: unblank [ 4.431172] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4.431417] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4.441913] Parent Clock set for DC plld2 [ 4.446478] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 4.447873] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 4.464248] usb usb2: usb_suspend_both: status 0 [ 4.482537] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4.482541] Extcon AUX1(HDMI) enable [ 4.495147] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 4.496503] Wake73 for irq=42 [ 4.497911] rtc rtc1: alarm rtc device [ 4.497929] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 4.497958] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.498114] i2c /dev entries driver [ 4.498126] tegradc 15200000.nvdisplay: sync windows ret = 246 [ 4.500995] max77620-power max20024-power: Event recorder REG_NVERC : 0x54 [ 4.507109] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 4.507456] FAN dev name: pwm-fan [ 4.507502] FAN:gpio request success. [ 4.507512] FAN: can't find tach_gpio [ 4.507521] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 4.507553] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 4.507801] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 4.507807] pwm_fan_driver pwm-fan: tach period: 1000 [ 4.508645] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 4.508653] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 4.508659] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 4.508664] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 4.508669] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 4.508673] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 4.508697] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 4.508703] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 4.508708] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 4.508714] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 4.510168] device-mapper: uevent: version 1.0.3 [ 4.510641] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 4.514159] tegra194_cpufreq_probe: platform driver Initialization: pass [ 4.515219] cpuidle: Initializing cpuidle driver [ 4.524393] sdhci: Secure Digital Host Controller Interface driver [ 4.524396] sdhci: Copyright(c) Pierre Ossman [ 4.524398] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.537235] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 4.553916] CMDQ: cmdq_platfm_init successful [ 4.554405] sdhci-tegra 3440000.sdhci: Got CD GPIO [ 4.563933] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 4.597017] sdhci-tegra 3440000.sdhci: wakeup init done, cdirq 321 [ 4.619907] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.643996] gpio tegra-gpio wake51 for gpio=130(Q:2) [ 4.644069] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.683923] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 4.687861] tegra-se-nvhost 15810000.se: initialized [ 4.702849] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 4.729299] tegra-se-nvhost 15820000.se: initialized [ 4.730546] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 4.756688] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 4.756693] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.756697] usb 1-2: Product: 4-Port USB 2.1 Hub [ 4.756700] usb 1-2: Manufacturer: Generic [ 4.756829] tegra-se-nvhost 15830000.se: initialized [ 4.757351] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 4.757570] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 4.769229] hub 1-2:1.0: USB hub found [ 4.772950] hub 1-2:1.0: 4 ports detected [ 4.785176] tegra-se-nvhost 15840000.se: initialized [ 4.786184] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 4.787405] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.787587] hidraw: raw HID events driver (C) Jiri Kosina [ 4.788916] usbcore: registered new interface driver usbhid [ 4.788920] usbhid: USB HID core driver [ 4.899492] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 4.900659] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.901053] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.901565] denver_knobs_init:MTS_VERSION:53250041 [ 4.901815] tegra19x_actmon d230000.actmon: in actmon_register()... [ 4.912174] mmc0: periodic cache flush enabled [ 4.912187] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 4.912685] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 4.912847] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 4.913015] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 4.913199] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 4.924055] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 4.924479] t19x_cache tegra-cache: probed [ 4.954402] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 4.954409] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 4.954868] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 4.955925] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 5.001612] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 5.026363] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610 [ 5.026371] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.026376] usb 1-3: Product: USB2.0 Hub [ 5.037278] hub 1-3:1.0: USB hub found [ 5.042889] hub 1-3:1.0: 4 ports detected [ 5.131750] PLL_AON clock registered [ 5.174741] FAN rising trip_level:1 cur_temp:53250 trip_temps[2]:60000 [ 5.175944] usb 1-2.1: new low-speed USB device number 4 using tegra-xusb [ 5.237254] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c31c [ 5.237260] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.237263] usb 1-2.1: Product: USB Keyboard [ 5.237266] usb 1-2.1: Manufacturer: Logitech [ 5.270906] input: Logitech USB Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/0003:046D:C31C.0001/input/input0 [ 5.328590] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-3610000.xhci-2.1/input0 [ 5.351730] Clocks initialized successfully [ 5.358523] input: Logitech USB Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.1/0003:046D:C31C.0002/input/input1 [ 5.416134] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-3610000.xhci-2.1/input1 [ 5.431931] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 5.439184] Extcon HDMI: HPD enabled [ 5.442948] tegradc 15200000.nvdisplay: hdmi: plugged [ 5.450388] nvpmodel: initialized successfully [ 5.453673] trusty-virtio trusty:virtio: initializing [ 5.458025] trusty_ipc virtio0: vring0: va(pa) ffffffc1e27cc000(0) qsz 32 notifyid 1 [ 5.465584] trusty_ipc virtio0: vring1: va(pa) ffffffc1e27ce000(0) qsz 32 notifyid 2 [ 5.473422] trusty-virtio trusty:virtio: initializing done [ 5.473556] trusty_ipc virtio0: is online [ 5.475917] usb 1-3.2: new full-speed USB device number 5 using tegra-xusb [ 5.490595] tegra-hda 3510000.hda: Override SDO lines to 4 [ 5.492242] usbcore: registered new interface driver snd-usb-audio [ 5.503748] usb 1-3.2: New USB device found, idVendor=0403, idProduct=6015 [ 5.508565] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.515620] usb 1-3.2: Product: FT230X Basic UART [ 5.520688] usb 1-3.2: Manufacturer: FTDI [ 5.523072] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input2 [ 5.523329] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input3 [ 5.523603] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input4 [ 5.523770] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input5 [ 5.557575] usb 1-3.2: SerialNumber: DK0CMFIV [ 5.595953] usb 1-2.2: new low-speed USB device number 6 using tegra-xusb [ 5.599412] OPE platform probe [ 5.601153] OPE platform probe successful [ 5.620073] usb 1-2.2: New USB device found, idVendor=093a, idProduct=2510 [ 5.621737] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.623368] usb 1-2.2: Product: USB Optical Mouse [ 5.625659] usb 1-2.2: Manufacturer: PixArt [ 5.630092] input: PixArt USB Optical Mouse as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2:1.0/0003:093A:2510.0003/input/input6 [ 5.632415] hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-3610000.xhci-2.2/input0 [ 5.693086] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 5.695010] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 5.696835] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 5.698607] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 5.700357] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 5.702105] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 5.703843] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 5.705568] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 5.707325] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 5.709007] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 5.710649] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 5.712300] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 5.713909] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 5.715514] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 5.717095] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 5.718651] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 5.720210] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 5.722405] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 5.728252] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 5.734507] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 5.740818] usb 2-3: new SuperSpeed USB device number 2 using tegra-xusb [ 5.772826] usb 2-3: New USB device found, idVendor=0bda, idProduct=0411 [ 5.774247] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.775595] usb 2-3: Product: 4-Port USB 3.1 Hub [ 5.777020] usb 2-3: Manufacturer: Generic [ 5.783506] u32 classifier [ 5.784147] hub 2-3:1.0: USB hub found [ 5.784918] hub 2-3:1.0: 4 ports detected [ 5.787423] Actions configured [ 5.788745] Initializing XFRM netlink socket [ 5.790633] NET: Registered protocol family 10 [ 5.793808] NET: Registered protocol family 17 [ 5.797156] NET: Registered protocol family 15 [ 5.801804] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 5.814776] Bluetooth: RFCOMM socket layer initialized [ 5.819965] Bluetooth: RFCOMM ver 1.11 [ 5.823789] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.829410] Bluetooth: HIDP socket layer initialized [ 5.834571] 9pnet: Installing 9P2000 support [ 5.838802] Key type dns_resolver registered [ 5.843011] Registered cp15_barrier emulation handler [ 5.843924] usb 1-2.4: new full-speed USB device number 7 using tegra-xusb [ 5.854795] Registered setend emulation handler [ 5.861470] registered taskstats version 1 [ 5.864286] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 5.865726] usb 1-2.4: New USB device found, idVendor=067b, idProduct=2303 [ 5.865731] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.865735] usb 1-2.4: Product: USB-Serial Controller [ 5.865738] usb 1-2.4: Manufacturer: Prolific Technology Inc. [ 5.896673] OF: PCI: host bridge /pcie@14160000 ranges: [ 5.901099] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 5.906942] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 5.913069] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 6.076152] usb 2-3.3: new SuperSpeed USB device number 3 using tegra-xusb [ 6.097192] usb 2-3.3: New USB device found, idVendor=13fe, idProduct=5200 [ 6.098387] usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.099576] usb 2-3.3: Product: Patriot Memory [ 6.100723] usb 2-3.3: Manufacturer: [ 6.101844] usb 2-3.3: SerialNumber: 0701392E1F62EA79 [ 6.105121] usb-storage 2-3.3:1.0: USB Mass Storage device detected [ 6.106631] scsi host0: usb-storage 2-3.3:1.0 [ 6.430653] tegra-pcie-dw 14160000.pcie: link is down [ 6.432027] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 6.433526] pci_bus 0004:00: root bus resource [bus 00-ff] [ 6.435553] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 6.436830] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 6.438062] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 6.439196] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 6.439365] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 6.439602] iommu: Adding device 0004:00:00.0 to group 59 [ 6.440979] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 6.442117] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 6.443521] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 6.444730] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 6.444826] aer 0004:00:00.0:pcie002: service driver aer loaded [ 6.444986] pcie_pme 0004:00:00.0:pcie001: unloading service driver pcie_pme [ 6.445038] aer 0004:00:00.0:pcie002: unloading service driver aer [ 6.445123] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 6.445216] iommu: Removing device 0004:00:00.0 from group 59 [ 6.446423] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 6.448235] tegra-pcie-dw 14160000.pcie: PCIe link is not up...! [ 6.450069] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 6.451547] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 6.452842] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 6.560221] OF: PCI: host bridge /pcie@141a0000 ranges: [ 6.561487] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 6.562746] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 6.564051] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 6.675989] tegra-pcie-dw 141a0000.pcie: link is up [ 6.677622] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 6.678989] pci_bus 0005:00: root bus resource [bus 00-ff] [ 6.680356] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 6.681771] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 6.683212] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 6.684662] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 6.684803] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 6.685016] iommu: Adding device 0005:00:00.0 to group 59 [ 6.686630] pci 0005:01:00.0: [1987:5012] type 00 class 0x010802 [ 6.686745] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 6.687647] iommu: Adding device 0005:01:00.0 to group 60 [ 6.700721] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 6.702118] pci 0005:01:00.0: BAR 0: assigned [mem 0x1f40000000-0x1f40003fff 64bit] [ 6.703574] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 6.704973] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 6.706405] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 6.707863] pci 0005:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 6.709592] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 6.711017] pci 0005:01:00.0: Signaling PME through PCIe PME interrupt [ 6.712439] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 6.712535] aer 0005:00:00.0:pcie002: service driver aer loaded [ 6.712898] nvme nvme0: pci function 0005:01:00.0 [ 6.714374] nvme 0005:01:00.0: enabling device (0000 -> 0002) [ 6.725026] tegra-cbb 14040000.cv-noc: noc_secure_irq = 90, noc_nonsecure_irq = 89> [ 6.730809] tegra194-isp5 14800000.isp: initialized [ 6.732299] driver not enabled, cannot register any devices [ 6.740644] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 6.745354] tegra194-vi5 15c10000.vi: initialized [ 6.746776] driver not enabled, cannot register any devices [ 6.753079] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 6.758983] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 6.763387] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 6.772301] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 6.781294] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 6.789247] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 6.797589] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 6.810189] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 6.814353] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 6.823225] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 6.833306] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 6.840801] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 6.850884] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 6.861272] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 6.869394] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 6.878087] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 6.887012] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 6.895424] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 6.980324] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 6.982052] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 6.983740] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 6.985442] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 6.987341] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 6.988910] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 6.990577] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (66) [ 6.991982] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 6.994498] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=06bdc710c3c9a48de2881774602bbcf4d0114a58 [ 6.999788] Wake83 for irq=211 [ 7.002596] gpio tegra-gpio wake67 for gpio=48(G:0) [ 7.007765] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 7.013196] input: gpio-keys as /devices/gpio-keys/input/input7 [ 7.053590] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:07:40 UTC (946688860) [ 7.055456] mmcblk mmc0:0001: Card claimed for testing. [ 7.097483] bpmp: mounted debugfs mirror [ 7.105266] ALSA device list: [ 7.106638] #0: tegra-hda-xnx at 0x3518000 irq 65 [ 7.108015] #1: jetson-xaviernx-ape [ 7.110859] Freeing unused kernel memory: 8640K [ 7.113192] scsi 0:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 6 [ 7.120784] sd 0:0:0:0: [sda] 30949376 512-byte logical blocks: (15.8 GB/14.8 GiB) [ 7.123968] sd 0:0:0:0: [sda] Write Protect is off [ 7.125582] sd 0:0:0:0: [sda] Mode Sense: 2b 80 00 08 [ 7.127279] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 7.152172] Root device found: mmcblk0p1 [ 7.155403] Found dev node: /dev/mmcblk0p1 [ 7.241855] sda: sda1 [ 7.247477] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 7.305253] EXT4-fs (mmcblk0p1): 12 orphan inodes deleted [ 7.306714] EXT4-fs (mmcblk0p1): recovery complete [ 7.312924] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.317428] Rootfs mounted over mmcblk0p1 [ 7.351298] Switching from initrd to actual rootfs [ 7.443257] systemd[1]: System time before build time, advancing clock. [ 7.471356] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.476577] cgroup: cgroup2: unknown option "nsdelegate" [ 7.490318] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.494310] systemd[1]: Detected architecture arm64. [ 7.509106] systemd[1]: Set hostname to . [ 7.597110] systemd[1]: Configuration file /etc/systemd/system/qbic-shutdown.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 7.601354] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 7.603144] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 7.756878] systemd[1]: Configuration file /etc/systemd/system/setsdroot.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 7.763256] random: systemd: uninitialized urandom read (16 bytes read) [ 7.767740] systemd[1]: Created slice System Slice. [ 7.771540] random: systemd: uninitialized urandom read (16 bytes read) [ 7.773654] systemd[1]: Listening on Journal Socket. [ 7.777371] random: systemd: uninitialized urandom read (16 bytes read) [ 7.780729] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 7.873291] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 7.944212] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.309090] systemd-journald[2424]: Received request to flush runtime journal from PID 1 [ 9.194150] random: crng init done [ 9.195442] random: 7 urandom warning(s) missed due to ratelimiting [ 9.268502] using random self ethernet address [ 9.268507] using random host ethernet address [ 9.581116] cpu-throttle-alert cooling device registered. [ 9.581899] gpu-throttle-alert cooling device registered. [ 9.590028] aux-throttle-alert cooling device registered. [ 9.981408] Mass Storage Function, version: 2009/09/11 [ 9.981423] LUN: removable file: (no medium) [ 9.990943] using random self ethernet address [ 9.993772] using random host ethernet address [ 10.064736] rndis0: HOST MAC 02:49:9b:c8:93:70 [ 10.065257] rndis0: MAC 02:49:9b:c8:93:71 [ 10.066530] usb0: HOST MAC 02:49:9b:c8:93:72 [ 10.066575] usb0: MAC 02:49:9b:c8:93:73 [ 10.066605] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 10.074388] l4tbr0: port 1(rndis0) entered blocking state [ 10.074399] l4tbr0: port 1(rndis0) entered disabled state [ 10.075165] device rndis0 entered promiscuous mode [ 10.096215] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 10.114916] l4tbr0: port 2(usb0) entered blocking state [ 10.114930] l4tbr0: port 2(usb0) entered disabled state [ 10.115773] device usb0 entered promiscuous mode [ 10.129067] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 10.619483] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.721083] usbcore: registered new interface driver pl2303 [ 10.721155] usbserial: USB Serial support registered for pl2303 [ 10.721243] pl2303 1-2.4:1.0: pl2303 converter detected [ 10.734939] usb 1-2.4: pl2303 converter now attached to ttyUSB0 [ 10.744952] usbcore: registered new interface driver ftdi_sio [ 10.745066] usbserial: USB Serial support registered for FTDI USB Serial Device [ 10.745280] ftdi_sio 1-3.2:1.0: FTDI USB Serial Device converter detected [ 10.745734] usb 1-3.2: Detected FT-X [ 10.747020] usb 1-3.2: FTDI USB Serial Device converter now attached to ttyUSB1 [ 10.804517] ras_fhi_disable: FHI 473 disabled [ 10.805281] CPU4: shutdown [ 10.807492] psci: CPU4 killed (polled 0 ms) [ 10.856539] ras_fhi_disable: FHI 474 disabled [ 10.858971] CPU5: shutdown [ 10.861204] psci: CPU5 killed (polled 0 ms) [ 10.864915] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 10.932751] gpio tegra-gpio wake20 for gpio=52(G:4) [ 10.946428] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.202716] zram: Added device: zram0 [ 11.205838] zram: Added device: zram1 [ 11.210225] zram: Added device: zram2 [ 11.212604] zram: Added device: zram3 [ 11.265610] zram0: detected capacity change from 0 to 1017851904 [ 11.333470] Adding 993992k swap on /dev/zram0. Priority:5 extents:1 across:993992k SS [ 11.345480] zram1: detected capacity change from 0 to 1017851904 [ 11.369161] Adding 993992k swap on /dev/zram1. Priority:5 extents:1 across:993992k SS [ 11.374439] zram2: detected capacity change from 0 to 1017851904 [ 11.391078] Adding 993992k swap on /dev/zram2. Priority:5 extents:1 across:993992k SS [ 11.394513] zram3: detected capacity change from 0 to 1017851904 [ 11.410048] Adding 993992k swap on /dev/zram3. Priority:5 extents:1 across:993992k SS [ 11.681314] Bridge firewalling registered [ 11.709610] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 12.097765] Netfilter messages via NETLINK v0.30. [ 12.107985] ctnetlink v0.93: registering with nfnetlink. [ 12.486936] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 12.682412] tegradc 15200000.nvdisplay: unblank [ 12.682428] tegradc 15210000.nvdisplay: blank - powerdown [ 14.120156] FAN rising trip_level:1 cur_temp:57000 trip_temps[2]:60000 [ 14.153490] fuse init (API version 7.26) [ 16.237211] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.237226] Bluetooth: BNEP socket layer initialized [ 17.175597] tegradc 15200000.nvdisplay: unblank [ 17.175659] tegradc 15210000.nvdisplay: blank - powerdown [ 19.584341] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 22.219360] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control off [ 22.221233] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 38.248101] vdd-sdmmc1-sw: disabling [ 38.248129] vdd-1v8-sd: disabling [ 38.248136] vdd-1v8-cvb: disabling [ 38.248141] vdd-epb-1v0: disabling [ 38.248146] avdd-cam-2v8: disabling [ 38.248152] vdd_sys_en: disabling [ 81.320157] FAN rising trip_level:2 cur_temp:60050 trip_temps[3]:68000 qbic@qbic-desktop:~$ lspci 0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1) 0005:01:00.0 Non-Volatile memory controller: Device 1987:5012 (rev 01) qbic@qbic-desktop:~$ lspci -vv 0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport 0005:01:00.0 Non-Volatile memory controller: Device 1987:5012 (rev 01) (prog-if 02 [NVM Express]) Subsystem: Device 1987:5012 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: nvme