[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5403-d8000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Sat Feb 19 08:58:27 PST 2022 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 003a0000@a06b2000 [ 0.000000] Found lut_mem: 00002008@a06af000 [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2032221 [ 0.000000] DMA zone: 7178 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 459357 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2000467 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x3a0000@0xa06b2000 lut_mem=0x2008@0xa06af000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 nv-auto-config [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29952(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7186892K/8128884K available (15358K kernel code, 2956K rwdata, 6696K rodata, 8640K init, 612K bss, 188328K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000618] Console: colour dummy device 80x25 [ 0.000629] console [tty0] enabled [ 0.000637] bootconsole [tegra_comb_uart0] disabled [ 0.000651] kmemleak: Kernel memory leak detector disabled [ 0.000669] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000685] pid_max: default: 32768 minimum: 301 [ 0.001735] Security Framework initialized [ 0.002298] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002309] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003948] ftrace: allocating 47098 entries in 184 pages [ 0.401422] sched-energy: Sched-energy-costs installed from DT [ 0.401443] ASID allocator initialised with 65536 entries [ 0.437199] tegra-id: chipid=21917. [ 0.437211] tegra-id: opt_subrevision=1. [ 0.437238] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.437252] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.437261] DTB Build time: Feb 19 2022 09:00:51 [ 0.485450] CPU1: Booted secondary processor [4e0f0040] [ 0.517339] CPU2: Booted secondary processor [4e0f0040] [ 0.549471] CPU3: Booted secondary processor [4e0f0040] [ 0.581799] CPU4: Booted secondary processor [4e0f0040] [ 0.613784] CPU5: Booted secondary processor [4e0f0040] [ 0.614058] Brought up 6 CPUs [ 0.614097] SMP: Total of 6 processors activated. [ 0.614113] CPU features: detected feature: Privileged Access Never [ 0.614119] CPU features: detected feature: LSE atomic instructions [ 0.614125] CPU features: detected feature: User Access Override [ 0.614131] CPU features: detected feature: 32-bit EL0 Support [ 0.615586] CPU: All CPU(s) started at EL2 [ 0.615647] alternatives: patching kernel code [ 0.622196] devtmpfs: initialized [ 0.661206] Initilizing CustomIPI irq domain [ 0.661470] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.661484] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.672591] pinctrl core: initialized pinctrl subsystem [ 0.672805] OS set in device tree is not L4T. [ 0.673125] regulator-dummy: no parameters [ 0.674479] Initializing plugin-manager [ 0.674532] Plugin module not found [ 0.674586] Plugin-manager status disabled [ 0.675639] NET: Registered protocol family 16 [ 0.698969] pstore: using zlib compression [ 0.698992] console [pstore-1] enabled [ 0.698997] pstore: Registered ramoops as persistent store backend [ 0.699004] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.716563] cpuidle: using governor menu [ 0.717570] bpmp: waiting for handshake [ 0.717578] bpmp: handshake completed [ 0.717595] bpmp: synchronizing channels [ 0.717604] bpmp: channels synchronized [ 0.717610] bpmp: mail init ok [ 0.720003] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.720168] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.720177] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.720219] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.720225] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.720230] t19x-arm-smmu 12000000.iommu: nested translation [ 0.720241] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.720268] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.720275] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.720282] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.720288] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.723709] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.723748] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.726457] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.727503] tegra_aon_clk_init: ok [ 0.727516] Registering BPMP clocks... [ 0.727619] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.728185] Serial: AMBA PL011 UART driver [ 0.728298] tegra_powergate_init: DONE [ 0.728354] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.728371] DTB Build time: Feb 19 2022 09:00:51 [ 0.731232] Tegra reboot handler registered. [ 0.739008] iommu: Adding device 14160000.pcie to group 0 [ 0.739635] iommu: Adding device 141a0000.pcie to group 1 [ 0.740912] iommu: Adding device 2490000.ether_qos to group 2 [ 0.741390] iommu: Adding device 3100000.serial to group 3 [ 0.741895] iommu: Adding device 3110000.serial to group 4 [ 0.742279] iommu: Adding device 3140000.serial to group 5 [ 0.742923] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.743217] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.743238] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.743255] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.743261] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.743318] tegra-pmc: PMC Prod config success [ 0.743534] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.743548] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.743847] iommu: Adding device 3460000.sdhci to group 6 [ 0.744321] iommu: Adding device 3210000.spi to group 7 [ 0.744782] iommu: Adding device 3230000.spi to group 8 [ 0.745156] iommu: Adding device 3270000.spi to group 9 [ 0.746328] iommu: Adding device 3160000.i2c to group 10 [ 0.746741] iommu: Adding device c240000.i2c to group 11 [ 0.747124] iommu: Adding device 3180000.i2c to group 12 [ 0.747523] iommu: Adding device 3190000.i2c to group 13 [ 0.748073] iommu: Adding device 31b0000.i2c to group 14 [ 0.748454] iommu: Adding device 31c0000.i2c to group 15 [ 0.748908] iommu: Adding device c250000.i2c to group 16 [ 0.749298] iommu: Adding device 31e0000.i2c to group 17 [ 0.749861] iommu: Adding device sound to group 18 [ 0.750437] iommu: Adding device 3510000.hda to group 19 [ 0.750982] iommu: Adding device bc00000.rtcpu to group 20 [ 0.752757] iommu: Adding device 13e10000.host1x to group 21 [ 0.753276] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.753658] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.754009] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.754428] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.754772] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.755170] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.755537] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.755895] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.756416] iommu: Adding device 15340000.vic to group 30 [ 0.756946] iommu: Adding device 15380000.nvjpg to group 31 [ 0.757261] iommu: Adding device 15500000.tsec to group 32 [ 0.757528] iommu: Adding device 15100000.tsecb to group 33 [ 0.757792] iommu: Adding device 15480000.nvdec to group 34 [ 0.758084] iommu: Adding device 15140000.nvdec1 to group 35 [ 0.758364] iommu: Adding device 154c0000.nvenc to group 36 [ 0.758660] iommu: Adding device 15a80000.nvenc1 to group 37 [ 0.759075] iommu: Adding device 15880000.nvdla0 to group 38 [ 0.759463] iommu: Adding device 158c0000.nvdla1 to group 39 [ 0.760070] iommu: Adding device 15200000.nvdisplay to group 40 [ 0.760233] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06b2000(3a0000) [ 0.760245] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06af000(3000) [ 0.764139] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.764211] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.764905] iommu: Adding device 15210000.nvdisplay to group 41 [ 0.764958] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.766928] iommu: Adding device 15c10000.vi to group 42 [ 0.767107] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.767569] iommu: Adding device 14800000.isp to group 43 [ 0.768479] iommu: Adding device 16000000.pva0 to group 44 [ 0.768994] iommu: Adding device 16800000.pva1 to group 45 [ 0.769418] iommu: Adding device 15810000.se to group 46 [ 0.769820] iommu: Adding device 15820000.se to group 47 [ 0.770100] iommu: Adding device 15830000.se to group 48 [ 0.770395] iommu: Adding device 15840000.se to group 49 [ 0.770692] iommu: Adding device c1a0000.aon to group 50 [ 0.772358] iommu: Adding device d000000.bpmp to group 51 [ 0.772699] bpmp: ping status is 0 [ 0.772825] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.776204] bpmp d000000.bpmp: probe ok [ 0.778180] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.778705] iommu: Adding device smmu_test to group 52 [ 0.779792] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c10000 [ 0.779816] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c20000 [ 0.779837] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c30000 [ 0.779860] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c40000 [ 0.779880] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c50000 [ 0.779899] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2b80000 [ 0.779919] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2b90000 [ 0.779937] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2ba0000 [ 0.779958] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x2bb0000 [ 0.779976] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1700000 [ 0.779994] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1710000 [ 0.780015] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1720000 [ 0.780033] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1730000 [ 0.780051] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1740000 [ 0.780082] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1750000 [ 0.780102] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1760000 [ 0.780144] mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1770000 [ 0.780228] mc-err: mcerr ops are set to t19x [ 0.786301] iommu: Adding device 2600000.dma to group 53 [ 0.791160] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.792344] GPIO line 339 (wifi-enable) hogged as output/high [ 0.792394] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.792435] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.792746] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.800525] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.800594] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.800634] GPIO line 266 (w-disable1) hogged as output/high [ 0.800670] GPIO line 264 (w-disable2) hogged as output/high [ 0.800705] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.801019] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.803317] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.803329] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.803339] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.804361] iommu: Adding device 3550000.xudc to group 54 [ 0.805084] iommu: Adding device 3610000.xhci to group 55 [ 0.808168] arm64_ras arm64_ras: probed [ 0.808591] ras_fhi_enable: FHI 469 enabled on CPU0 [ 0.808648] ras_fhi_enable: FHI 470 enabled on CPU1 [ 0.808740] ras_fhi_enable: FHI 471 enabled on CPU2 [ 0.808826] ras_fhi_enable: FHI 472 enabled on CPU3 [ 0.808946] ras_fhi_enable: FHI 473 enabled on CPU4 [ 0.809021] ras_fhi_enable: FHI 474 enabled on CPU5 [ 0.809217] carmel_ras_enable: RAS enabled on cpu0 [ 0.809390] carmel_ras_enable: RAS enabled on cpu1 [ 0.809597] carmel_ras_enable: RAS enabled on cpu2 [ 0.809801] carmel_ras_enable: RAS enabled on cpu3 [ 0.810027] carmel_ras_enable: RAS enabled on cpu4 [ 0.810262] carmel_ras_enable: RAS enabled on cpu5 [ 0.810376] carmel_ras carmel_ras: probed [ 0.811835] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 478, noc_nonsecure_irq = 477> [ 0.812355] tegra-cbb c600000.aon-noc: noc_secure_irq = 480, noc_nonsecure_irq = 479> [ 0.813267] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 482, noc_nonsecure_irq = 481> [ 0.814256] tegra-cbb be00000.rce-noc: noc_secure_irq = 484, noc_nonsecure_irq = 483> [ 0.815208] tegra-cbb b600000.sce-noc: noc_secure_irq = 486, noc_nonsecure_irq = 485> [ 0.815565] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.816933] vdd-ac-bat: 5000 mV [ 0.817352] vdd-sdmmc1-sw: 3300 mV [ 0.817670] vdd-1v8-sd: 1800 mV [ 0.818036] vdd-3v3-cvb: 3300 mV [ 0.818358] vdd-1v8-cvb: 1800 mV [ 0.818672] vdd-epb-1v0: 1000 mV [ 0.818856] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.819152] avdd-cam-2v8: 2800 mV [ 0.819451] vdd-fan: 5000 mV [ 0.819746] vdd-hdmi-5v0: 5000 mV [ 0.820107] vdd_sys_en: 1200 mV [ 0.852857] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.857561] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.857866] SCSI subsystem initialized [ 0.858102] libata version 3.00 loaded. [ 0.858368] usbcore: registered new interface driver usbfs [ 0.858450] usbcore: registered new interface driver hub [ 0.858493] usbcore: registered new device driver usb [ 0.870083] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.873070] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.881667] vdd-1v0: at 1000 mV [ 0.885698] vdd-1v8-hs: at 1800 mV [ 0.889683] vdd-1v8-ls: at 1800 mV [ 0.893711] vdd-1v8-ao: at 1800 mV [ 0.897773] vddio-ddr-1v1: at 1100 mV [ 0.901503] vdd-rtc: at 800 mV [ 0.902467] spmic-ldo1: at 2375 mV [ 0.909565] vdd-ao-3v3: at 3300 mV [ 0.917573] vddio-emmc-3v3: at 3300 mV [ 0.918557] spmic-ldo4: at 1587 mV [ 0.925601] vdd-usb-3v3: at 3300 mV [ 0.933630] vddio-sdmmc1-3v3: at 3300 mV [ 0.937652] vdd-csi-1v2: at 1200 mV [ 0.938778] spmic-ldo8: at 1800 mV [ 0.943104] GPIO line 246 (gpio_default) hogged as output/high [ 0.944068] GPIO line 247 (gpio_default) hogged as output/high [ 0.944438] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.944829] max77620 4-003c: max77620 probe successful [ 0.945482] media: Linux media interface: v0.10 [ 0.945519] Linux video capture interface: v2.00 [ 0.946841] pps_core: LinuxPPS API ver. 1 registered [ 0.946848] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.946870] PTP clock support registered [ 0.947151] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.947386] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.947427] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.950083] trusty trusty: trusty version: Built: 08:57:16 Feb 19 2022 [ 0.950146] trusty trusty: selected api version: 3 (requested 3) [ 0.951241] Advanced Linux Sound Architecture Driver Initialized. [ 0.951722] Bluetooth: Core ver 2.22 [ 0.951770] NET: Registered protocol family 31 [ 0.951776] Bluetooth: HCI device and connection manager initialized [ 0.951787] Bluetooth: HCI socket layer initialized [ 0.951796] Bluetooth: L2CAP socket layer initialized [ 0.951851] Bluetooth: SCO socket layer initialized [ 0.954574] camchar: rtcpu character device driver loaded [ 0.955120] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.955215] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.957531] clocksource: Switched to clocksource arch_sys_counter [ 0.999965] VFS: Disk quotas dquot_6.6.0 [ 1.000074] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.000423] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.001704] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.001754] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.001996] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.002005] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.002018] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.002026] nvmap_page_pool_init: Total RAM pages: 1985139 [ 1.002032] nvmap_page_pool_init: nvmap page pool size: 248142 pages (969 MB) [ 1.002138] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.002598] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.004636] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.017320] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.017530] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.017756] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.017938] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.018118] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.019270] la/ptsa driver initialized. [ 1.019552] NET: Registered protocol family 2 [ 1.019636] IP idents hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.023695] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.024082] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.024662] TCP: Hash tables configured (established 65536 bind 65536) [ 1.024705] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.024823] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.025328] NET: Registered protocol family 1 [ 1.025784] RPC: Registered named UNIX socket transport module. [ 1.025790] RPC: Registered udp transport module. [ 1.025795] RPC: Registered tcp transport module. [ 1.025800] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.025810] PCI: CLS 0 bytes, default 64 [ 1.026032] Trying to unpack rootfs image as initramfs... [ 1.239818] Freeing initrd memory: 7068K [ 1.262570] host1x 13e10000.host1x: initialized [ 1.265098] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.270136] audit: initializing netlink subsys (disabled) [ 1.270191] audit: type=2000 audit(0.888:1): initialized [ 1.270870] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.281031] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.286450] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.287140] 9p: Installing v9fs 9p2000 file system support [ 1.292443] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.292632] io scheduler noop registered [ 1.292918] io scheduler cfq registered (default) [ 1.297024] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.298171] random: fast init done [ 1.332002] iommu: Adding device 2993000.adsp to group 56 [ 1.442915] iommu: Adding device aconnect@2a41000:adsp_audio to group 57 [ 1.443812] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.457486] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.457923] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.458611] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.459104] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.459559] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.463195] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.463409] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.466257] tsec 15500000.tsec: initialized [ 1.468165] tsec 15100000.tsecb: initialized [ 1.471992] nvdec 15480000.nvdec: initialized [ 1.474503] nvdec 15140000.nvdec1: initialized [ 1.480272] falcon 15340000.vic: initialized [ 1.482318] falcon 15380000.nvjpg: initialized [ 1.484338] falcon 154c0000.nvenc: initialized [ 1.486450] falcon 15a80000.nvenc1: initialized [ 1.489566] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.491158] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.492680] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.494327] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.495859] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.497388] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.498842] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.500367] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.504075] t194-nvcsi 15a00000.nvcsi: initialized [ 1.509696] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.510140] scare-pigeon 14b00000.isp-thi: initialized [ 1.516032] pva 16000000.pva0: initialized [ 1.521936] pva 16800000.pva1: initialized [ 1.527014] nvdla 15880000.nvdla0: initialized [ 1.532009] nvdla 158c0000.nvdla1: initialized [ 1.533345] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.533359] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.533418] tegradccommon 15200000.dc_common: dma mapping done [ 1.533656] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=77 [ 1.533665] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.534062] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.534089] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.534381] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.534388] tegra_cec 3960000.tegra_cec: probed [ 1.535034] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.535090] generic_infoframe_type: 0x87 [ 1.535174] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.535207] tegradc 15200000.nvdisplay: Display dc.ffffff800bd50000 registered with id=0 [ 1.539265] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.539274] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.539279] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.539826] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.539837] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.540764] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1280x720 (on 0x0mm) pclk=74175000 [ 1.543200] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.543208] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.547482] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.547582] tegradc 15200000.nvdisplay: probed [ 1.548338] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.548346] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.548684] kfuse 3830000.kfuse: initialized [ 1.564608] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.567724] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.569046] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.569875] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.571250] console [ttyTCU0] enabled [ 1.571751] [drm] Initialized [ 1.589863] Console: switching to colour frame buffer device 160x45 [ 1.589950] tegradc 15200000.nvdisplay: fb registered [ 1.590224] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.590813] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.590898] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.595804] Parent Clock set for DC plld2 [ 1.642765] brd: module loaded [ 1.649776] tegradc 15200000.nvdisplay: hdmi: tmds rate:74175K prod-setting:prod_c_hdmi_54m_111m [ 1.650392] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.650407] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.653065] loop: module loaded [ 1.653133] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.653275] tegra_profiler: auth: init [ 1.653924] THERMAL EST: found 3 subdevs [ 1.653931] THERMAL EST num_resources: 0 [ 1.653937] [THERMAL EST subdev 0] [ 1.653944] [THERMAL EST subdev 1] [ 1.653950] [THERMAL EST subdev 2] [ 1.653961] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.654321] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.654326] THERMAL EST: thz register success. [ 1.654504] THERMAL EST: end of probe, return err: 0 [ 1.655226] sd: No Scsi addr parsed to reserve index [ 1.655261] hisi_sas: driver version v1.6 [ 1.666341] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.666350] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.666360] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.666564] 1 ofpart partitions found on MTD device spi6.0 [ 1.666570] Creating 1 MTD partitions on "spi6.0": [ 1.666578] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.669126] libphy: Fixed MDIO Bus: probed [ 1.669861] tun: Universal TUN/TAP device driver, 1.6 [ 1.669867] tun: (C) 1999-2004 Max Krasnyansky [ 1.671830] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.671835] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.671943] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.671948] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.672058] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.672063] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.672166] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.672171] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.676111] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.676118] Extcon AUX1(HDMI) enable [ 1.676540] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.676570] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.676642] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.676680] tegradc 15210000.nvdisplay: Display dc.ffffff800d1e0000 registered with id=1 [ 1.678086] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.678098] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.686324] tegradc 15210000.nvdisplay: probed [ 1.686671] tegradc 15210000.nvdisplay: fb registered [ 1.689994] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.690002] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.690014] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.690025] tegradc 15210000.nvdisplay: blank - powerdown [ 1.690039] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.690044] Extcon DP: HPD disabled [ 1.690049] hpd: hpd_switch 0 [ 1.690055] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.690066] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.690075] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.807903] tegradc 15200000.nvdisplay: blank - powerdown [ 1.850205] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.850209] Extcon AUX1(HDMI) disable [ 1.875744] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.876902] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.900801] tegradc 15200000.nvdisplay: unblank [ 1.902566] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.902849] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.913631] Parent Clock set for DC plld2 [ 1.918419] tegradc 15200000.nvdisplay: hdmi: tmds rate:108000K prod-setting:prod_c_hdmi_54m_111m [ 1.919881] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.920167] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.920541] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 5a cc aa [ 1.920557] Using phyrst_lpmode = 1 from DT [ 1.920687] libphy: dwc_phy: probed [ 1.923379] PPP generic driver version 2.4.2 [ 1.923628] PPP BSD Compression module registered [ 1.923633] PPP Deflate Compression module registered [ 1.923649] PPP MPPE Compression module registered [ 1.923654] NET: Registered protocol family 24 [ 1.923709] usbcore: registered new interface driver r8152 [ 1.923766] usbcore: registered new interface driver asix [ 1.923820] usbcore: registered new interface driver ax88179_178a [ 1.923856] usbcore: registered new interface driver cdc_ether [ 1.923885] usbcore: registered new interface driver net1080 [ 1.923914] usbcore: registered new interface driver cdc_subset [ 1.923944] usbcore: registered new interface driver zaurus [ 1.923989] usbcore: registered new interface driver cdc_ncm [ 1.924188] VFIO - User Level meta-driver version: 0.3 [ 1.929569] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.929588] ehci-pci: EHCI PCI platform driver [ 1.929620] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.929628] ohci-pci: OHCI PCI platform driver [ 1.929659] ohci-platform: OHCI generic platform driver [ 1.935079] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.937362] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f4d70000 id [ 1.938158] usbcore: registered new interface driver uas [ 1.938220] usbcore: registered new interface driver usb-storage [ 1.938353] usbcore: registered new interface driver usbserial [ 1.939725] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 1.939771] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.939794] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.940490] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.940540] tegra-xusb 3610000.xhci: irq 464, io mem 0x03610000 [ 1.940800] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.940807] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.940812] usb usb1: Product: xHCI Host Controller [ 1.940817] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.940822] usb usb1: SerialNumber: 3610000.xhci [ 1.941435] hub 1-0:1.0: USB hub found [ 1.941478] hub 1-0:1.0: 4 ports detected [ 1.941700] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.941776] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.942042] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.942054] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.942064] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.942296] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.942303] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.942308] usb usb2: Product: xHCI Host Controller [ 1.942313] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.942324] usb usb2: SerialNumber: 3610000.xhci [ 1.942686] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.942695] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.942719] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.942958] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.942975] hub 2-0:1.0: USB hub found [ 1.943038] hub 2-0:1.0: 4 ports detected [ 1.943631] mousedev: PS/2 mouse device common for all mice [ 1.943842] usbcore: registered new interface driver xpad [ 1.943942] Wake76 for irq=199 [ 1.943947] Wake77 for irq=199 [ 1.943950] Wake78 for irq=199 [ 1.943952] Wake79 for irq=199 [ 1.943955] Wake80 for irq=199 [ 1.943958] Wake81 for irq=199 [ 1.943961] Wake82 for irq=199 [ 1.944004] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 1.944010] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 1.955212] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.955217] Extcon AUX1(HDMI) enable [ 1.970370] tegradc 15200000.nvdisplay: sync windows ret = 246 [ 1.993289] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.993295] Extcon HDMI: HPD enabled [ 1.993352] tegradc 15200000.nvdisplay: hdmi: plugged [ 2.045450] usb usb2: usb_suspend_both: status 0 [ 2.075383] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 2.077011] Wake73 for irq=42 [ 2.078290] rtc rtc1: alarm rtc device [ 2.078308] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 2.078347] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.078514] i2c /dev entries driver [ 2.081117] i2c i2c-2: Added multiplexed i2c bus 9 [ 2.081625] i2c i2c-2: Added multiplexed i2c bus 10 [ 2.081634] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 2.082265] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.105826] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.105886] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.106565] imx219 9-0010: board setup failed [ 2.106792] imx219: probe of 9-0010 failed with error -121 [ 2.107278] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.130547] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.130615] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.130964] imx219 10-0010: board setup failed [ 2.131185] imx219: probe of 10-0010 failed with error -121 [ 2.132494] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 2.139428] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 2.139833] FAN dev name: pwm-fan [ 2.139878] FAN:gpio request success. [ 2.139887] FAN: can't find tach_gpio [ 2.139899] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.139926] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.140157] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.140165] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.140699] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.140709] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.140717] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.140725] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.140733] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.140741] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.140749] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.140756] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.140764] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.140772] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.141588] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 2.142732] device-mapper: uevent: version 1.0.3 [ 2.143234] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.146805] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.147872] cpuidle: Initializing cpuidle driver [ 2.148989] sdhci: Secure Digital Host Controller Interface driver [ 2.148993] sdhci: Copyright(c) Pierre Ossman [ 2.148997] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.150076] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 2.151838] CMDQ: cmdq_platfm_init successful [ 2.156776] tegra-se-nvhost 15810000.se: initialized [ 2.157994] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.159120] tegra-se-nvhost 15820000.se: initialized [ 2.160232] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.161308] tegra-se-nvhost 15830000.se: initialized [ 2.162064] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.163135] tegra-se-nvhost 15840000.se: initialized [ 2.164182] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.165651] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.165838] hidraw: raw HID events driver (C) Jiri Kosina [ 2.167155] usbcore: registered new interface driver usbhid [ 2.167159] usbhid: USB HID core driver [ 2.171362] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.172413] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.172961] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.173756] denver_knobs_init:MTS_VERSION:54811859 [ 2.174102] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.174748] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.175193] t19x_cache tegra-cache: probed [ 2.177767] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.177777] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.178493] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.178942] PLL_AON clock registered [ 2.180614] Clocks initialized successfully [ 2.182274] nvpmodel: initialized successfully [ 2.183477] trusty-virtio trusty:virtio: initializing [ 2.183697] trusty_ipc virtio0: vring0: va(pa) ffffffc1e27b2000(0) qsz 32 notifyid 1 [ 2.183707] trusty_ipc virtio0: vring1: va(pa) ffffffc1e27b4000(0) qsz 32 notifyid 2 [ 2.183847] trusty-virtio trusty:virtio: initializing done [ 2.184189] trusty_ipc virtio0: is online [ 2.184425] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.184913] usbcore: registered new interface driver snd-usb-audio [ 2.192902] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.213589] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.213862] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.214131] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.214349] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.239077] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 2.253669] mmc0: periodic cache flush enabled [ 2.253689] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.254184] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.254394] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.254615] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.254838] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.258282] OPE platform probe [ 2.258386] OPE platform probe successful [ 2.259818] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.268927] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.289686] usb 1-2: New USB device found, idVendor=0424, idProduct=2744 [ 2.289694] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.289698] usb 1-2: Product: USB2744 [ 2.289702] usb 1-2: Manufacturer: Microchip Tech [ 2.290491] hub 1-2:1.0: USB hub found [ 2.290554] hub 1-2:1.0: 5 ports detected [ 2.330806] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.330940] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.331068] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.331237] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.331396] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.331583] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.331754] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.331917] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.332115] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.332282] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.332388] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.332492] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.332593] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.332695] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.332793] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.332928] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.333054] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.333184] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.333292] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.333395] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.363059] u32 classifier [ 2.363074] Actions configured [ 2.363181] Initializing XFRM netlink socket [ 2.363822] NET: Registered protocol family 10 [ 2.364665] NET: Registered protocol family 17 [ 2.364686] NET: Registered protocol family 15 [ 2.364742] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.364871] Bluetooth: RFCOMM socket layer initialized [ 2.364886] Bluetooth: RFCOMM ver 1.11 [ 2.364892] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.364902] Bluetooth: HIDP socket layer initialized [ 2.364926] 9pnet: Installing 9P2000 support [ 2.364970] Key type dns_resolver registered [ 2.365233] Registered cp15_barrier emulation handler [ 2.365253] Registered setend emulation handler [ 2.367065] registered taskstats version 1 [ 2.367500] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.368895] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.368930] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.368950] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.368966] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.409122] usb 2-3: new SuperSpeed USB device number 2 using tegra-xusb [ 2.429416] usb 2-3: New USB device found, idVendor=0424, idProduct=5744 [ 2.429422] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 2.429426] usb 2-3: Product: USB5744 [ 2.429430] usb 2-3: Manufacturer: Microchip Tech [ 2.431420] hub 2-3:1.0: USB hub found [ 2.431810] hub 2-3:1.0: 4 ports detected [ 2.480902] tegra-pcie-dw 14160000.pcie: link is up [ 2.481171] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.481179] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.481202] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.481218] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.481224] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.481276] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.481449] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.481685] iommu: Adding device 0004:00:00.0 to group 58 [ 2.482121] pci 0004:01:00.0: [8086:24fd] type 00 class 0x028000 [ 2.482289] pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 2.483153] pci 0004:01:00.0: PME# supported from D0 D3hot D3cold [ 2.483499] iommu: Adding device 0004:01:00.0 to group 59 [ 2.494388] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 2.494398] pci 0004:01:00.0: BAR 0: assigned [mem 0x1740000000-0x1740001fff 64bit] [ 2.494483] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.494492] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 2.494512] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 2.494577] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128 [ 2.494884] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.494889] pci 0004:01:00.0: Signaling PME through PCIe PME interrupt [ 2.494903] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.495006] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.495697] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.495952] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 2.495968] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 2.548878] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 2.552925] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.570851] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b [ 2.570858] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.588881] usb 2-3: usb_suspend_both: status 0 [ 2.589124] usb usb2: usb_suspend_both: status 0 [ 2.601458] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.601496] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.601517] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.601533] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 2.617481] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 2.617493] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.712891] tegra-pcie-dw 141a0000.pcie: link is up [ 2.713137] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 2.713144] pci_bus 0005:00: root bus resource [bus 00-ff] [ 2.713168] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 2.713184] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 2.713189] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 2.713217] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 2.713354] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 2.713586] iommu: Adding device 0005:00:00.0 to group 60 [ 2.713960] pci 0005:01:00.0: [126f:2263] type 00 class 0x010802 [ 2.714080] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.715055] iommu: Adding device 0005:01:00.0 to group 61 [ 2.725754] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 2.725765] pci 0005:01:00.0: BAR 0: assigned [mem 0x1f40000000-0x1f40003fff 64bit] [ 2.725842] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 2.725850] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 2.725867] pci 0005:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 2.725911] pci 0005:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 2.726189] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 2.726193] pci 0005:01:00.0: Signaling PME through PCIe PME interrupt [ 2.726208] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 2.726315] aer 0005:00:00.0:pcie002: service driver aer loaded [ 2.726729] nvme nvme0: pci function 0005:01:00.0 [ 2.728953] nvme 0005:01:00.0: enabling device (0000 -> 0002) [ 2.735457] tegra-cbb 14040000.cv-noc: noc_secure_irq = 90, noc_nonsecure_irq = 89> [ 2.740109] tegra194-isp5 14800000.isp: initialized [ 2.747239] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 2.751506] tegra194-vi5 15c10000.vi: initialized [ 2.756514] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 2.756626] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 2.756896] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 2.761266] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 2.761297] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 2.761303] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 2.761377] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 2.761412] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 2.761416] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 2.765625] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 2.765658] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 2.765664] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 2.765941] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 2.765975] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 2.765980] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 2.766361] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 2.766402] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 2.766406] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 2.766715] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 2.767511] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 2.777598] FAN rising trip_level:1 cur_temp:46000 trip_temps[2]:60000 [ 2.845106] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 2.845574] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 2.845837] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 2.846040] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 2.846418] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 2.846498] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 2.846701] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (65) [ 2.846705] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 2.847913] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=1d7bd17f78528535d57449fa59ec355e37add4f8 [ 2.848369] Wake83 for irq=211 [ 2.848449] gpio tegra-gpio wake67 for gpio=48(G:0) [ 2.848551] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 2.848727] input: gpio-keys as /devices/gpio-keys/input/input4 [ 2.855623] nvme0n1: p1 p2 p3 [ 2.882164] tegra_rtc c2a0000.rtc: setting system clock to 2022-06-30 07:32:31 UTC (1656574351) [ 2.882728] mmcblk mmc0:0001: Card claimed for testing. [ 2.919318] bpmp: mounted debugfs mirror [ 2.926028] ALSA device list: [ 2.926034] #0: tegra-hda-xnx at 0x3518000 irq 64 [ 2.926037] #1: jetson-xaviernx-ape [ 2.928639] Freeing unused kernel memory: 8640K [ 2.968430] Root device found: mmcblk0p1 [ 2.970412] Found dev node: /dev/mmcblk0p1 [ 2.995354] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.998058] Rootfs mounted over mmcblk0p1 [ 3.028412] Switching from initrd to actual rootfs [ 3.222296] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.225564] cgroup: cgroup2: unknown option "nsdelegate" [ 3.239253] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 3.240476] systemd[1]: Detected architecture arm64. [ 3.248631] systemd[1]: Set hostname to . [ 3.333232] usb 2-3.1: new SuperSpeed USB device number 3 using tegra-xusb [ 3.353731] usb 2-3.1: New USB device found, idVendor=2357, idProduct=0600 [ 3.353739] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 3.353743] usb 2-3.1: Product: USB 10/100/1000 LAN [ 3.353747] usb 2-3.1: Manufacturer: TP-Link [ 3.353751] usb 2-3.1: SerialNumber: 000001000000 [ 3.356039] usb-storage 2-3.1:1.0: USB Mass Storage device detected [ 3.356345] scsi host0: usb-storage 2-3.1:1.0 [ 3.432910] usb 1-2.3: new low-speed USB device number 5 using tegra-xusb [ 3.461539] usb 1-2.3: New USB device found, idVendor=413c, idProduct=301a [ 3.461547] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.461551] usb 1-2.3: Product: Dell MS116 USB Optical Mouse [ 3.461555] usb 1-2.3: Manufacturer: PixArt [ 3.464177] input: PixArt Dell MS116 USB Optical Mouse as /devices/3610000.xhci/usb1/1-2/1-2.3/1-2.3:1.0/0003:413C:301A.0001/input/input5 [ 3.464514] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-3610000.xhci-2.3/input0 [ 3.540924] usb 1-2.4: new full-speed USB device number 6 using tegra-xusb [ 3.565837] usb 1-2.4: New USB device found, idVendor=04ca, idProduct=00ac [ 3.565869] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.565874] usb 1-2.4: Product: Dell Wireless Device [ 3.565878] usb 1-2.4: Manufacturer: Liteon [ 3.568598] input: Liteon Dell Wireless Device as /devices/3610000.xhci/usb1/1-2/1-2.4/1-2.4:1.0/0003:04CA:00AC.0002/input/input6 [ 3.625617] hid-generic 0003:04CA:00AC.0002: input,hidraw1: USB HID v1.11 Keyboard [Liteon Dell Wireless Device] on usb-3610000.xhci-2.4/input0 [ 3.628598] input: Liteon Dell Wireless Device as /devices/3610000.xhci/usb1/1-2/1-2.4/1-2.4:1.1/0003:04CA:00AC.0003/input/input7 [ 3.685353] hid-generic 0003:04CA:00AC.0003: input,hidraw2: USB HID v1.11 Mouse [Liteon Dell Wireless Device] on usb-3610000.xhci-2.4/input1 [ 3.723807] random: systemd: uninitialized urandom read (16 bytes read) [ 3.724008] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 3.724032] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 3.728107] systemd[1]: Created slice system-modprobe.slice. [ 3.728303] random: systemd: uninitialized urandom read (16 bytes read) [ 3.729451] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 3.729511] random: systemd: uninitialized urandom read (16 bytes read) [ 3.730527] systemd[1]: Created slice User and Session Slice. [ 3.730781] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.731638] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.731828] systemd[1]: Reached target User and Group Name Lookups. [ 3.731926] systemd[1]: Reached target Slices. [ 3.732000] systemd[1]: Reached target Swap. [ 3.732528] systemd[1]: Listening on RPCbind Server Activation Socket. [ 3.737568] systemd[1]: Listening on Syslog Socket. [ 3.737918] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.738091] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.738737] systemd[1]: Listening on Journal Audit Socket. [ 3.738980] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.739361] systemd[1]: Listening on Journal Socket. [ 3.739659] systemd[1]: Listening on udev Control Socket. [ 3.739863] systemd[1]: Listening on udev Kernel Socket. [ 3.744993] systemd[1]: Mounting Huge Pages File System... [ 3.749291] systemd[1]: Mounting POSIX Message Queue File System... [ 3.753001] systemd[1]: Mounting RPC Pipe File System... [ 3.757422] systemd[1]: Mounting Kernel Debug File System... [ 3.761499] systemd[1]: Mounting Kernel Trace File System... [ 3.764962] usb 1-2.5: new high-speed USB device number 7 using tegra-xusb [ 3.766242] systemd[1]: Starting Journal Service... [ 3.770743] systemd[1]: Starting Set the console keyboard layout... [ 3.774639] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 3.774802] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 3.779283] systemd[1]: Started Nameserver information manager. [ 3.779927] systemd[1]: Reached target Network (Pre). [ 3.781714] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 3.781848] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 3.785952] usb 1-2.5: New USB device found, idVendor=0424, idProduct=2740 [ 3.785959] usb 1-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.785962] usb 1-2.5: Product: Hub Controller [ 3.785965] usb 1-2.5: Manufacturer: Microchip Tech [ 3.787155] systemd[1]: Starting Load Kernel Modules... [ 3.790783] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.794186] systemd[1]: Starting udev Coldplug all Devices... [ 3.798507] systemd[1]: Starting Uncomplicated firewall... [ 3.804270] systemd[1]: Mounted Huge Pages File System. [ 3.804704] systemd[1]: Mounted POSIX Message Queue File System. [ 3.805278] systemd[1]: Mounted RPC Pipe File System. [ 3.805692] systemd[1]: Mounted Kernel Debug File System. [ 3.806087] systemd[1]: Mounted Kernel Trace File System. [ 3.808109] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 3.812469] systemd[1]: Finished Uncomplicated firewall. [ 3.814094] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.818189] systemd[1]: Finished Remount Root and Kernel File Systems. [ 3.820806] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 3.824116] systemd[1]: Starting Platform Persistent Storage Archival... [ 3.827712] systemd[1]: Starting Load/Save Random Seed... [ 3.833211] systemd[1]: Starting Create System Users... [ 3.885013] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 3.912271] systemd[1]: Finished Platform Persistent Storage Archival. [ 3.916177] systemd[1]: Finished Load Kernel Modules. [ 3.917176] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 3.920527] systemd[1]: Mounting Kernel Configuration File System... [ 3.924078] systemd[1]: Starting Apply Kernel Variables... [ 3.958524] systemd[1]: Mounted Kernel Configuration File System. [ 3.966615] systemd[1]: Finished Set the console keyboard layout. [ 3.971811] systemd[1]: Finished Create System Users. [ 3.975124] systemd[1]: Starting Create Static Device Nodes in /dev... [ 4.023391] systemd[1]: Finished Apply Kernel Variables. [ 4.025739] systemd[1]: Finished Create Static Device Nodes in /dev. [ 4.026217] systemd[1]: Reached target Local File Systems (Pre). [ 4.035752] systemd[1]: Mounting Mount unit for bare, revision 5... [ 4.075809] systemd[1]: Mounting Mount unit for core18, revision 2406... [ 4.083992] systemd[1]: Mounting Mount unit for core20, revision 1498... [ 4.088306] systemd[1]: Mounting Mount unit for core20, revision 1522... [ 4.093690] systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 75... [ 4.103781] systemd[1]: Mounting Mount unit for gnome-3-38-2004, revision 100... [ 4.108127] systemd[1]: Mounting Mount unit for gnome-3-38-2004, revision 107... [ 4.112931] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1519... [ 4.118626] squashfs: SQUASHFS error: Xattrs in filesystem, these will be ignored [ 4.118844] squashfs: SQUASHFS error: unable to read xattr id index table [ 4.121018] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1534... [ 4.126327] systemd[1]: Mounting Mount unit for snap-store, revision 559... [ 4.130882] systemd[1]: Mounting Mount unit for snapd, revision 15909... [ 4.136345] systemd[1]: Mounting Mount unit for snapd, revision 16019... [ 4.139905] systemd[1]: Starting udev Kernel Device Manager... [ 4.152202] systemd[1]: Started Journal Service. [ 4.177253] squashfs: SQUASHFS error: Xattrs in filesystem, these will be ignored [ 4.177491] squashfs: SQUASHFS error: unable to read xattr id index table [ 4.189926] systemd-journald[2386]: Received client request to flush runtime journal. [ 4.381418] scsi 0:0:0:0: CD-ROM Realtek USB CD-ROM 2.00 PQ: 0 ANSI: 0 [ 5.460590] Intel(R) Wireless WiFi driver for Linux [ 5.460596] Copyright(c) 2003- 2015 Intel Corporation [ 5.460925] iwlwifi 0004:01:00.0: enabling device (0000 -> 0002) [ 5.467282] iwlwifi 0004:01:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2 [ 5.467545] iwlwifi 0004:01:00.0: Falling back to user helper [ 5.625307] cpu-throttle-alert cooling device registered. [ 5.625747] gpu-throttle-alert cooling device registered. [ 5.626096] aux-throttle-alert cooling device registered. [ 6.212217] iwlwifi 0004:01:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2 [ 6.212221] iwlwifi 0004:01:00.0: Falling back to user helper [ 6.233767] iwlwifi 0004:01:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2 [ 6.233772] iwlwifi 0004:01:00.0: Falling back to user helper [ 6.251756] iwlwifi 0004:01:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2 [ 6.251760] iwlwifi 0004:01:00.0: Falling back to user helper [ 6.262402] iwlwifi 0004:01:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm [ 6.288588] usbcore: registered new interface driver btusb [ 6.294180] Bluetooth: hci0: Firmware revision 0.1 build 50 week 12 2019 [ 6.308338] iwlwifi 0004:01:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230 [ 6.312393] iwlwifi 0004:01:00.0: L1 Disabled - LTR Enabled [ 6.313067] iwlwifi 0004:01:00.0: L1 Disabled - LTR Enabled [ 6.430737] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 6.431556] thermal thermal_zone6: failed to read out thermal zone (-5) [ 6.431756] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type iwlwifi_1 [ 7.146004] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.218674] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null) [ 23.736970] random: crng init done [ 23.737103] random: 7 urandom warning(s) missed due to ratelimiting [ 24.028531] using random self ethernet address [ 24.028688] using random host ethernet address [ 24.311328] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.311343] Bluetooth: BNEP socket layer initialized [ 24.728888] can: controller area network core (rev 20120528 abi 9) [ 24.729807] NET: Registered protocol family 29 [ 24.790077] can: raw protocol (rev 20120528) [ 24.873861] CAN device driver interface [ 24.908577] Mass Storage Function, version: 2009/09/11 [ 24.908586] LUN: removable file: (no medium) [ 24.917798] Message RAM Configuration | base addr |0x0c312000| | sidfc_flssa |0x00000000| | xidfc_flesa |0x00000040| | rxf0c_f0sa |0x000000c0| | rxf1c_f1sa |0x000009c0| | rxbc_rbsa |0x000009c0| | txefc_efsa |0x000009c0| | txbc_tbsa |0x00000a40| | tmc_tmsa |0x00000ec0| [ 24.917933] Release 3.2.0 from 19.12.2014 [ 24.918517] net can0: mttcan device registered (regs=ffffff800a4e7000, irq=63) [ 24.933268] using random self ethernet address [ 24.933424] using random host ethernet address [ 24.967105] rndis0: HOST MAC fe:77:6b:c8:d0:b8 [ 24.967198] rndis0: MAC fe:77:6b:c8:d0:b9 [ 24.971082] mttcan c310000.mttcan can0: Bitrate set [ 24.971153] mttcan_controller_config: ctrlmode 10 [ 24.971171] mttcan c310000.mttcan can0: Bitrate set [ 24.977194] IPv6: ADDRCONF(NETDEV_UP): can0: link is not ready [ 24.980355] usb0: HOST MAC fe:77:6b:c8:d0:ba [ 24.980394] usb0: MAC fe:77:6b:c8:d0:bb [ 24.980419] tegra-xudc-new 3550000.xudc: exiting ELPG [ 24.984518] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 24.984539] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 24.984612] tegra-xudc-new 3550000.xudc: entering ELPG [ 24.985234] tegra-xudc-new 3550000.xudc: entering ELPG done [ 24.985249] tegra-xudc-new 3550000.xudc: exiting ELPG [ 24.985674] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 24.985688] tegra-xudc-new 3550000.xudc: entering ELPG [ 24.985888] tegra-xudc-new 3550000.xudc: entering ELPG done [ 24.992207] l4tbr0: port 1(rndis0) entered blocking state [ 24.992214] l4tbr0: port 1(rndis0) entered disabled state [ 25.000209] device rndis0 entered promiscuous mode [ 25.009618] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 25.018009] l4tbr0: port 2(usb0) entered blocking state [ 25.018016] l4tbr0: port 2(usb0) entered disabled state [ 25.033131] device usb0 entered promiscuous mode [ 25.052312] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 25.163374] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.481798] gpio tegra-gpio wake20 for gpio=52(G:4) [ 25.487756] net eth0: get_configure_l3v4_filter --> [ 25.488296] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.502563] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.504792] iwlwifi 0004:01:00.0: L1 Disabled - LTR Enabled [ 25.505104] iwlwifi 0004:01:00.0: L1 Disabled - LTR Enabled [ 25.536454] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 25.622478] iwlwifi 0004:01:00.0: L1 Disabled - LTR Enabled [ 25.622794] iwlwifi 0004:01:00.0: L1 Disabled - LTR Enabled [ 25.691289] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.840671] zram: Added device: zram0 [ 25.848030] zram: Added device: zram1 [ 25.849223] zram: Added device: zram2 [ 25.850716] zram: Added device: zram3 [ 25.855305] zram: Added device: zram4 [ 25.859171] zram: Added device: zram5 [ 25.935933] zram0: detected capacity change from 0 to 678936576 [ 25.969625] Adding 663020k swap on /dev/zram0. Priority:5 extents:1 across:663020k SS [ 25.974840] zram1: detected capacity change from 0 to 678936576 [ 25.976926] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready [ 26.001843] Adding 663020k swap on /dev/zram1. Priority:5 extents:1 across:663020k SS [ 26.012661] zram2: detected capacity change from 0 to 678936576 [ 26.034296] Bridge firewalling registered [ 26.043142] Adding 663020k swap on /dev/zram2. Priority:5 extents:1 across:663020k SS [ 26.058329] zram3: detected capacity change from 0 to 678936576 [ 26.085810] Adding 663020k swap on /dev/zram3. Priority:5 extents:1 across:663020k SS [ 26.104289] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 26.110213] zram4: detected capacity change from 0 to 678936576 [ 26.131101] Adding 663020k swap on /dev/zram4. Priority:5 extents:1 across:663020k SS [ 26.135010] zram5: detected capacity change from 0 to 678936576 [ 26.156684] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 26.171638] Adding 663020k swap on /dev/zram5. Priority:5 extents:1 across:663020k SS [ 26.395835] Netfilter messages via NETLINK v0.30. [ 26.398949] ctnetlink v0.93: registering with nfnetlink. [ 26.531671] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 29.657190] FAN rising trip_level:1 cur_temp:49900 trip_temps[2]:60000 [ 29.677520] wlan0: authenticate with 06:90:e8:9d:5d:99 [ 29.687950] wlan0: send auth to 06:90:e8:9d:5d:99 (try 1/3) [ 29.695166] wlan0: authenticated [ 29.697020] wlan0: associate with 06:90:e8:9d:5d:99 (try 1/3) [ 29.700986] wlan0: RX AssocResp from 06:90:e8:9d:5d:99 (capab=0x431 status=0 aid=9) [ 29.713365] wlan0: associated [ 29.732764] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 34.137109] vdd-sdmmc1-sw: disabling [ 34.137116] vdd-1v8-sd: disabling [ 34.137121] vdd-1v8-cvb: disabling [ 34.137125] vdd-epb-1v0: disabling [ 34.137131] avdd-cam-2v8: disabling [ 34.137137] vdd_sys_en: disabling [ 38.226534] fuse init (API version 7.26) [ 39.861844] tegradc 15200000.nvdisplay: blank - powerdown [ 39.903811] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 39.903815] Extcon AUX1(HDMI) disable [ 39.931019] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 39.940422] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 39.942780] tegradc 15200000.nvdisplay: unblank [ 39.943940] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 39.945192] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 39.949697] Parent Clock set for DC plld2 [ 39.954759] tegradc 15200000.nvdisplay: hdmi: tmds rate:108000K prod-setting:prod_c_hdmi_54m_111m [ 39.956243] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 39.994620] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 39.994625] Extcon AUX1(HDMI) enable [ 40.007735] tegradc 15200000.nvdisplay: sync windows ret = 247 [ 40.656558] tegradc 15200000.nvdisplay: unblank [ 40.656578] tegradc 15210000.nvdisplay: blank - powerdown [ 55.343682] tegradc 15200000.nvdisplay: blank - powerdown [ 55.406523] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 55.406527] Extcon AUX1(HDMI) disable [ 55.431751] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 55.432427] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 55.432684] tegradc 15210000.nvdisplay: blank - powerdown [ 55.690274] tegradc 15200000.nvdisplay: blank - powerdown [ 55.690291] tegradc 15200000.nvdisplay: unblank [ 55.691115] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 55.691236] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 55.695868] Parent Clock set for DC plld2 [ 55.711994] tegradc 15200000.nvdisplay: hdmi: tmds rate:108000K prod-setting:prod_c_hdmi_54m_111m [ 55.713531] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 55.749415] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 55.749420] Extcon AUX1(HDMI) enable [ 55.749651] tegradc 15200000.nvdisplay: unblank [ 55.749673] tegradc 15210000.nvdisplay: blank - powerdown [ 141.458470] usb 2-3.1: Disable of device-initiated U1 failed. [ 141.459799] usb 2-3.1: Disable of device-initiated U2 failed. [ 142.154936] usb 2-3.1: USB disconnect, device number 3 [ 142.210894] usb 2-3: usb_suspend_both: status 0 [ 142.211171] usb usb2: usb_suspend_both: status 0 [ 144.906569] usb 2-3.1: new SuperSpeed USB device number 4 using tegra-xusb [ 144.931224] usb 2-3.1: New USB device found, idVendor=2357, idProduct=0601 [ 144.931236] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 144.931242] usb 2-3.1: Product: USB 10/100/1000 LAN [ 144.931247] usb 2-3.1: Manufacturer: TP-Link [ 144.931252] usb 2-3.1: SerialNumber: 000001000000 [ 144.936626] cdc_ether 2-3.1:2.0 eth1: register 'cdc_ether' at usb-3610000.xhci-3.1, CDC Ethernet Device, 60:a4:b7:58:d1:fb [ 144.945777] cdc_ether 2-3.1:2.0 eth1: unregister 'cdc_ether' usb-3610000.xhci-3.1, CDC Ethernet Device [ 145.074753] usb 2-3.1: reset SuperSpeed USB device number 4 using tegra-xusb [ 145.148797] r8152 2-3.1:1.0 eth1: v2.09.00 (2017/08/21) [ 145.148807] r8152 2-3.1:1.0 eth1: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 145.289144] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 145.303318] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 146.769232] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 146.772356] r8152 2-3.1:1.0 eth1: carrier on