[0000.352] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-938a8cd8) [0000.353] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.353] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.354] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.360] W> device prod register failed [0000.364] I> Boot-device: eMMC [0000.367] I> Boot_device: SDMMC_BOOT instance: 3 [0000.372] I> sdmmc-3 params source = boot args [0000.375] I> sdmmc bdev is already initialized [0000.380] I> sdmmc-3 params source = boot args [0000.388] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.395] I> Found 43 partitions in SDMMC_USER (instance 3) [0000.396] I> Active Boot chain : 0 [0000.399] I> parsing oem signed section of bpmp-fw header done [0000.404] I> bpmp-fw binary init read from storage [0000.411] I> RSA PSS signature check: OK [0000.412] I> oem authentication of bpmp-fw header done [0000.419] I> bpmp-fw binary done read from storage [0000.422] I> bpmp-fw: Authentication init Done [0000.427] I> parsing oem signed section of cpubl header done [0000.432] I> cpubl binary init read from storage [0000.436] I> bpmp-fw: Authentication Finalize Done [0000.443] I> RSA PSS signature check: OK [0000.444] I> oem authentication of cpubl header done [0000.449] I> cpubl binary done read from storage [0000.454] I> cpubl: Authentication init Done [0000.459] I> parsing oem signed section of rce header done [0000.463] I> rce binary init read from storage [0000.468] I> Relocating BR-BCT [0000.471] I> cpubl: Authentication Finalize Done [0000.477] I> RSA PSS signature check: OK [0000.479] I> oem authentication of rce header done [0000.483] I> rce binary done read from storage [0000.488] I> rce: Authentication init Done [0000.492] I> parsing oem signed section of ape header done [0000.497] I> ape binary init read from storage [0000.501] I> rce: Authentication Finalize Done [0000.508] I> RSA PSS signature check: OK [0000.509] I> oem authentication of ape header done [0000.514] I> ape binary done read from storage [0000.518] I> ape: Authentication init Done [0000.523] I> parsing oem signed section of tos header done [0000.527] I> tos binary init read from storage [0000.532] I> ape: Authentication Finalize Done [0000.539] I> RSA PSS signature check: OK [0000.540] I> oem authentication of tos header done [0000.544] I> tos binary done read from storage [0000.549] I> tos: Authentication init Done [0000.553] I> parsing oem signed section of bpmp-fw-dtb header done [0000.559] I> bpmp-fw-dtb binary init read from storage [0000.564] I> tos: Authentication Finalize Done [0000.572] I> RSA PSS signature check: OK [0000.572] I> oem authentication of bpmp-fw-dtb header done [0000.580] I> bpmp-fw-dtb binary done read from storage [0000.582] I> bpmp-fw-dtb: Authentication init Done [0000.587] I> parsing oem signed section of cpubl-dtb header done [0000.593] I> cpubl-dtb binary init read from storage [0000.597] I> bpmp-fw-dtb: Authentication Finalize Done [0000.964] I> RSA PSS signature check: OK [0000.964] I> oem authentication of cpubl-dtb header done [0000.965] I> cpubl-dtb binary done read from storage [0000.966] I> cpubl-dtb: Authentication init Done [0000.968] I> parsing oem signed section of eks header done [0000.968] I> eks binary init read from storage [0000.969] I> cpubl-dtb: Authentication Finalize Done [0000.974] I> RSA PSS signature check: OK [0000.975] I> oem authentication of eks header done [0000.980] I> eks binary done read from storage [0000.984] I> eks: Authentication init Done [0000.988] I> eks: Authentication Finalize Done [0000.993] I> EKB detected (length: 0x410) @ VA:0x52700400 ��NOTICE: BL31: v1.3(release):fe06da916 NOTICE: BL31: Built : 18:06:49, Apr 8 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized PLL2 start resistor calibration timeout uphy initialized safereg_init: period 80 ms ec_late initialized �� [0001.494] I> Welcome to Cboot��mrq initialized fmon_post initialized �� [0001.495] I> Cboot Version: t194-cfa2bc91 [0001.497] I> CPU-BL Params @ 0xf2820000 [0001.500] I> 0) Base:0x00000000 Size:0x00000000 [0001.505] I> 1) Base:0xf1100000 Size:0x00100000 [0001.509] I> 2) Base:0xf2000000 Size:0x00200000 [0001.514] I> 3) Base:0xf1200000 Size:0x00200000 ��clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ��[0001.518] I> 4) Base:0xf1000000 Size:0x00100000 [0001.598] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.602] I> 6) Base:0xf3800000 Size:0x00400000 [0001.607] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.611] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.615] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.620] I> 10) Base:0xf3000000 Size:0x00800000 [0001.624] I> 11) Base:0x40000000 Size:0x00040000 [0001.629] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.633] I> 13) Base:0x40046000 Size:0x00002000��emc_debugfs initialized dvs_debugfs initialized �� ��fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ��[0001.643] I> 14) Base:0x40048000 Size:0x00002000 [0001.693] I> 15) Base:0xac000000 Size:0x00004000 [0001.697] I> 16) Base:0x4004a000 Size:0x00002000 [0001.702] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.706] I> 18) Base:0x4004c000 Size:0x00002000 [0001.711] I> 19) Base:0xf2200000 Size:0x00600000 [0001.715] I> 20) Base:0x4004e000 Size:0x00002000 [0001.720] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.724] I> 22) Base:0x00000000 Size:0x00000000 [0001.729] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.733] I> 24) Base:0xf6000000 Size:0x02000000 [0001.738] I> 25) Base:0x40050000 Size:0x00002000 [0001.742] I> 26) Base:0x40040000 Size:0x00006000 [0001.747] I> 27) Base:0xf1800000 Size:0x00400000 [0001.751] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.755] I> 29) Base:0xf1400000 Size:0x00400000 [0001.760] I> 30) Base:0x00000000 Size:0x00000000 [0001.764] I> 31) Base:0x00000000 Size:0x00000000 [0001.769] I> 32) Base:0xf8000000 Size:0x08000000 [0001.773] I> 33) Base:0x00000000 Size:0x00000000 [0001.778] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.782] I> 35) Base:0xab000000 Size:0x01000000 [0001.787] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.791] I> 37) Base:0xf2800000 Size:0x00800000 [0001.796] I> 38) Base:0x80000000 Size:0x20000000 [0001.800] I> 39) Base:0xb0000000 Size:0x08000000 [0001.805] I> 40) Base:0x00000000 Size:0x00000000 [0001.809] I> 41) Base:0x00000000 Size:0x00000000 [0001.814] I> 42) Base:0x00000000 Size:0x00000000 [0001.818] I> 43) Base:0x00000000 Size:0x00000000 [0001.822] I> 44) Base:0x00000000 Size:0x00000000 [0001.827] I> 45) Base:0x00000000 Size:0x00000000 [0001.831] GIC-SPI Target CPU: 0 [0001.834] Interrupts Init done [0001.837] calling constructors [0001.840] initializing heap [0001.843] I> Heap: [0xa0699b80 ... 0xab000000] [0001.847] initializing threads [0001.850] initializing timers [0001.853] creating bootstrap completion thread [0001.857] top of bootstrap2() [0001.860] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.864] initializing platform [0001.867] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.873] W> device prod register failed [0001.877] I> Bl_dtb @0xaaf00000 [0001.883] W> "plugin-manager" doesn't exist, creating [0001.885] W> "ids" doesn't exist, creating [0001.889] W> "connection" doesn't exist, creating [0001.893] W> "configs" doesn't exist, creating [0001.905] E> failed to read label property for node 227172: 13 [0001.908] E> failed to read reg property for node 227260: 13 [0001.910] E> failed to read label property for node 227312: 13 [0001.916] E> failed to read label property for node 227380: 13 [0001.922] E> failed to read label property for node 227416: 13 [0001.926] E> failed to read label property for node 227452: 13 [0001.932] E> failed to read reg property for node 227520: 13 [0001.938] E> failed to read label property for node 227572: 13 [0001.944] I> Find /i2c@3160000's alias i2c0 [0001.946] I> Reading eeprom i2c=0 address=0x50 [0001.976] I> Device at /i2c@3160000:0x50 [0001.976] I> Reading eeprom i2c=0 address=0x56 [0001.977] E> I2C: slave not found in slaves. [0001.977] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0001.978] E> I2C_DEV: Failed to send register address 0x00000000. [0001.979] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0001.986] E> eeprom: Failed to read I2C slave device [0001.991] I> Eeprom read failed 0x3526070d [0001.996] I> Find /i2c@3180000's alias i2c2 [0001.999] I> Reading eeprom i2c=2 address=0x54 [0002.004] E> I2C: slave not found in slaves. [0002.007] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0002.015] E> I2C_DEV: Failed to send register address 0x00000000. [0002.021] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0002.030] E> eeprom: Failed to read I2C slave device [0002.035] I> Eeprom read failed 0x3526070d [0002.039] I> Reading eeprom i2c=2 address=0x57 [0002.043] E> I2C: slave not found in slaves. [0002.047] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0002.055] E> I2C_DEV: Failed to send register address 0x00000000. [0002.061] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0002.070] E> eeprom: Failed to read I2C slave device [0002.075] I> Eeprom read failed 0x3526070d [0002.079] I> Reading eeprom i2c=2 address=0x52 [0002.083] E> I2C: slave not found in slaves. [0002.087] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0002.095] E> I2C_DEV: Failed to send register address 0x00000000. [0002.101] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0002.110] E> eeprom: Failed to read I2C slave device [0002.115] I> Eeprom read failed 0x3526070d [0002.120] I> Find /i2c@c240000's alias i2c1 [0002.123] I> Reading eeprom i2c=1 address=0x52 [0002.129] E> I2C: slave not found in slaves. [0002.131] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0002.139] E> I2C_DEV: Failed to send register address 0x00000000. [0002.145] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0002.154] E> eeprom: Retry to read I2C slave device. [0002.159] E> I2C: slave not found in slaves. [0002.163] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0002.171] E> I2C_DEV: Failed to send register address 0x00000000. [0002.177] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0002.186] E> eeprom: Failed to read I2C slave device [0002.191] I> Eeprom read failed 0x3526070d [0002.195] I> Reading eeprom i2c=1 address=0x50 [0002.199] E> I2C: slave not found in slaves. [0002.203] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.211] E> I2C_DEV: Failed to send register address 0x00000000. [0002.217] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0002.226] E> eeprom: Retry to read I2C slave device. [0002.231] E> I2C: slave not found in slaves. [0002.235] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.243] E> I2C_DEV: Failed to send register address 0x00000000. [0002.249] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0002.258] E> eeprom: Failed to read I2C slave device [0002.263] I> Eeprom read failed 0x3526070d [0002.267] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0002.272] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.283] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0002.291] W> "i2c@3160000" doesn't exist, creating [0002.295] W> "module@0x50" doesn't exist, creating [0002.301] I> Adding plugin-manager/cvm [0002.303] W> "chip-id" doesn't exist, creating [0002.307] I> Adding plugin-manager/chip-id/A02P [0002.312] I> Plugin-manager override starting [0002.316] I> node /plugin-manager/fragement-tegra-wdt-en matches [0002.324] I> node /plugin-manager/fragement-soft-wdt matches [0002.332] I> node /plugin-manager/fragment-pcie-c5-ep matches [0002.336] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0002.348] I> Disable plugin-manager status in FDT [0002.348] I> Plugin-manager override finished successfully [0002.349] I> gpio framework initialized [0002.354] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0002.361] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.368] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.375] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.383] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.389] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.395] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.403] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.411] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.417] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.425] I> fixed regulator driver initialized [0002.436] I> register 'maxim' power off handle [0002.437] I> virtual i2c enabled [0002.437] I> registered 'maxim,max20024' pmic [0002.439] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.446] I> Boot-device: eMMC [0002.449] I> Boot_device: SDMMC_BOOT instance: 3 [0002.457] I> sdmmc-3 params source = boot args [0002.458] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0002.463] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.474] I> sdmmc bdev is already initialized [0002.478] I> sdmmc-3 params source = boot args [0002.509] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.521] I> Found 43 partitions in SDMMC_USER (instance 3) [0002.532] I> enabling 'vdd-hdmi-5v0' regulator [0002.538] I> regulator 'vdd-hdmi-5v0' already enabled [0002.538] I> hdmi cable connected [0002.540] W> set volts not configured for 'vdd-1v0' [0002.542] W> set volts not configured for 'vdd-1v8-hs' [0002.543] I> retrieved tmds range from prod_list_hdmi_soc [0002.547] E> invalid display type [0002.551] E> invalid display type [0002.552] E> cannot find any other nvdisp nodes [0002.556] E> I2C: Timeout while polling for bus clear. Last value 0x00000000. [0002.557] E> I2C: Failed to clear bus for instance 6. [0002.559] E> I2C: Failed to clear bus for instance 6. [0002.563] E> I2C_DEV: Failed to initialize instance 6. [0002.568] E> read_edid, invalid i2c handle [0002.576] I> hdmi_enable, starting HDMI initialisation [0002.581] I> hdmi_enable, HDMI initialisation complete [0002.591] I> Load in CBoot Boot Options partition and parse it [0002.598] E> Error -9 when finding node with path /boot-configuration [0002.598] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.601] I> Using default boot order [0002.605] I> boot-dev-order :- [0002.608] I> 1.sd [0002.609] I> 2.usb [0002.611] I> 3.nvme [0002.613] I> 4.emmc [0002.615] I> 5.net [0002.617] I> Hit any key to stop autoboot: 4 3 2 1 [0004.625] initializing target [0004.625] calling apps_init() [0004.626] starting app kernel_boot_app [0004.645] I> found decompressor handler: lz4-legacy [0004.646] I> decompressing BMP blob ... [0004.657] I> Kernel type = Normal [0004.657] I> ########## SD (0) boot ########## [0004.658] I> No sdcard [0004.658] I> -0 params source = [0004.658] E> Blockdev open: exit error [0004.659] E> SD boot failed, err: 724238353 [0004.659] I> ########## USB (0) boot ########## [0004.670] I> Validate XUSB-FW ... [0004.670] I> T19x: Authenticate XUSB-FW (bin_type: 11), max size 0x28000 [0004.672] I> RSA PSS signature check: OK [0004.673] I> Encryption fuse is not ON [0004.674] I> USB Firmware Version: 60.09 release [0004.734] I> regulator of usb2-0 already enabled [0004.741] I> regulator of usb2-1 already enabled [0004.748] I> regulator of usb2-2 already enabled [0004.757] I> enabling 'vdd-5v-sata' regulator [0005.762] E> failed to initialize xhci controller [0005.763] E> Error in init of XUSB host driver, err: 79790026 [0005.763] W> Failed to initialize device 5-0 [0005.763] E> USB boot failed, err: 2037973030 [0005.764] I> ########## NVME (0) boot ########## [0005.764] I> Initializing nvme device instance 0 [0005.765] I> Initializing nvme controller [0005.769] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0005.775] I> vpcie3v3-supply not found [0005.779] I> vpcie12v-supply not found [0005.782] W> Failed to get nvidia,plat-gpios [0005.786] I> tegrabl_pcie_soc_preinit: (0): [0005.790] I> Unpowergate [0005.793] I> tegrabl_car_clk_disable(0) ... [0005.797] I> tegrabl_car_rst_set(CORE, 0) ... [0005.801] I> tegrabl_car_rst_set(APB, 0) ... [0005.805] I> tegrabl_car_clk_enable(0) ... [0005.809] I> tegrabl_car_rst_clear(APB, 0) ... [0005.813] I> tegrabl_set_ctrl_state(0) [0005.817] I> CLR PCIE_APB:6 [0005.820] I> tegrabl_pcie_soc_init: (0): [0005.823] I> APPL initialization ... [0005.827] I> poweron phys [0005.829] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0005.836] I> tegrabl_power_on_phy: power on phy @0x3e30000 [0005.841] I> tegrabl_power_on_phy: power on phy @0x3e40000 [0005.846] I> tegrabl_power_on_phy: power on phy @0x3e50000 [0005.852] I> tegrabl_power_on_phy: power on phy @0x3e60000 [0005.987] I> PCIe controller-0 link is up [0005.987] I> tegra_pcie_info[0].cfg0_base = 0x38000000 [0005.988] I> tegra_pcie_info[0].cfg1_base = 0x38020000 [0005.988] I> tegra_pcie_info[0].atu_dma_base = 0x38040000 [0005.988] I> tegra_pcie_bus[0].mem = 0x38200000 [0005.989] I> Scanning busnr: 0 devfn: 0 [0005.989] I> PCIe IDs: 0x1ad010de [0005.992] I> PCIe RID_CC: 0x60400a1 [0005.995] I> Scanning busnr: 1 devfn: 0 [0005.999] I> PCIe IDs: 0xfaf08086 [0006.002] I> PCIe RID_CC: 0x1080203 [0006.006] I> PCI Config: I/O=0x38100000, Memory=0x38200000 [0006.011] I> MEM64 bar_num=0 bar=0x38200000 [0006.015] I> Number of PCIe devices detected: 2 [0006.019] I> NVME page size: 4096 [0006.024] I> NVMe serial number: BTNR01331TCZ1P0B [0006.027] I> NVMe model number: INTEL SSDPEKNW010T9 [0006.034] I> NVMe firmware revision: 001C [0006.038] I> block_count: 2000409264 [0006.041] I> supported_lba: 0 [0006.044] I> block_size_log2: 0x9 [0006.047] I> tegrabl_create_io_queue_cmd: queue size: 2 [0006.053] I> tegrabl_create_io_queue_cmd: queue size: 2 [0006.058] I> nvme device id 000a0000 [0006.061] I> nvme-0 params source = [0006.065] W> Cannot find any partition table for 000a0000 [0006.070] I> Detect filesystem [0006.073] I> fs_detect:173: Unsupported or no filesystem present [0006.078] I> Loading kernel-bootctrl from partition [0006.083] I> Loading partition kernel-bootctrl at 0xa4ae0000 from device(0x1) [0006.096] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0006.097] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0006.110] I> removable_boot_load_kernel_and_dtb: force NVME bdev to close !!! [0006.111] E> NVME (0) boot failed, err: 0x2b2b000d [0006.116] I> ########## NVME (1) boot ########## [0006.120] I> Initializing nvme device instance 1 [0006.125] I> Initializing nvme controller [0006.129] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0006.135] I> vpcie3v3-supply not found [0006.139] I> vpcie12v-supply not found [0006.142] W> Failed to get nvidia,plat-gpios [0006.146] I> tegrabl_pcie_soc_preinit: (1): [0006.150] I> Unpowergate [0006.153] I> tegrabl_car_clk_disable(1) ... [0006.157] I> tegrabl_car_rst_set(CORE, 1) ... [0006.161] I> tegrabl_car_rst_set(APB, 1) ... [0006.165] I> tegrabl_car_clk_enable(1) ... [0006.169] I> tegrabl_car_rst_clear(APB, 1) ... [0006.173] I> tegrabl_set_ctrl_state(1) [0006.177] I> CLR PCIE_APB:6 [0006.180] I> tegrabl_pcie_soc_init: (1): [0006.183] I> APPL initialization ... [0006.187] I> poweron phys [0006.189] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0006.196] I> tegrabl_power_on_phy: power on phy @0x3e10000 [0007.301] C> Failed to link up controller-1 [0007.302] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0007.302] I> Failed to initialize SoC Host PCIe controller [0007.302] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(1); error=0x12 [0007.303] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0007.303] W> Failed to open NVME-1, err = 80800612 [0007.308] W> Failed to initialize device 10-1 [0007.312] E> NVME (1) boot failed, err: 0x80800612 [0007.317] I> ########## NVME (2) boot ########## [0007.321] I> Initializing nvme device instance 2 [0007.326] I> Initializing nvme controller [0007.330] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0007.336] I> vpcie3v3-supply not found [0007.339] I> vpcie12v-supply not found [0007.343] W> Failed to get nvidia,plat-gpios [0007.347] I> tegrabl_pcie_soc_preinit: (2): [0007.351] I> Unpowergate [0007.354] I> tegrabl_car_clk_disable(2) ... [0007.358] I> tegrabl_car_rst_set(CORE, 2) ... [0007.362] I> tegrabl_car_rst_set(APB, 2) ... [0007.366] I> tegrabl_car_clk_enable(2) ... [0007.370] I> tegrabl_car_rst_clear(APB, 2) ... [0007.374] I> tegrabl_set_ctrl_state(2) [0007.378] I> CLR PCIE_APB:6 [0007.380] I> tegrabl_pcie_soc_init: (2): [0007.384] I> APPL initialization ... [0007.387] I> poweron phys [0007.390] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0007.396] I> tegrabl_power_on_phy: controller 2 not available [0007.402] E> Failed to power on phy on controller-2 [0007.407] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0007.412] I> Failed to initialize SoC Host PCIe controller [0007.417] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(2); error=0x1 [0007.423] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0007.430] W> Failed to open NVME-2, err = 80800601 [0007.434] W> Failed to initialize device 10-2 [0007.439] E> NVME (2) boot failed, err: 0x80800601 [0007.443] I> ########## NVME (3) boot ########## [0007.448] I> Initializing nvme device instance 3 [0007.452] I> Initializing nvme controller [0007.457] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0007.462] I> vpcie3v3-supply not found [0007.466] I> vpcie12v-supply not found [0007.470] W> Failed to get nvidia,plat-gpios [0007.474] I> tegrabl_pcie_soc_preinit: (3): [0007.478] I> Unpowergate [0007.480] I> tegrabl_car_clk_disable(3) ... [0007.484] I> tegrabl_car_rst_set(CORE, 3) ... [0007.488] I> tegrabl_car_rst_set(APB, 3) ... [0007.493] I> tegrabl_car_clk_enable(3) ... [0007.496] I> tegrabl_car_rst_clear(APB, 3) ... [0007.501] I> tegrabl_set_ctrl_state(3) [0007.504] I> CLR PCIE_APB:6 [0007.507] I> tegrabl_pcie_soc_init: (3): [0007.511] I> APPL initialization ... [0007.514] I> poweron phys [0007.517] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0007.523] I> tegrabl_power_on_phy: power on phy @0x3e80000 ��safereg_poll_timer_cb: poll interval 130 above target 100