[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253-tegra (zhujinping@test001-OptiPlex-3010) (gcc version 7.5.0 (Linaro GCC 7.5-2019.12) ) #2 SMP PREEMPT Thu Oct 21 21:10:32 CST 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 1006592 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 523776 pages, LIFO batch:31 [ 0.000000] Normal zone: 7624 pages used for memmap [ 0.000000] Normal zone: 482816 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 990776 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 fbcon=map:0 net.ifnames=0 isolcpus=1-2 pcie_aspm=off [ 0.000000] PCIe ASPM is disabled [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29972(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3155996K/4026368K available (15358K kernel code, 2954K rwdata, 6772K rodata, 8640K init, 610K bss, 116708K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009630000 ( 6848 KB) [ 0.000000] .init : 0xffffff8009630000 - 0xffffff8009ea0000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009ea0000 - 0xffffff800a182808 ( 2955 KB) [ 0.000000] .bss : 0xffffff800a182808 - 0xffffff800a21b0b4 ( 611 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03dc8000 ( 61 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0f7200000 ( 3954 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009333] Console: colour dummy device 80x25 [ 0.014465] console [tty0] enabled [ 0.018035] kmemleak: Kernel memory leak detector disabled [ 0.023793] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.034655] pid_max: default: 32768 minimum: 301 [ 0.039797] Security Framework initialized [ 0.044243] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.051273] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.059321] ftrace: allocating 47062 entries in 184 pages [ 0.188719] sched-energy: Sched-energy-costs installed from DT [ 0.194860] ASID allocator initialised with 65536 entries [ 0.233282] tegra-id: chipid=21817. [ 0.236950] tegra-id: opt_subrevision=1. [ 0.241077] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.248115] DTS File Name: /home/zhujinping/dumu/nvidia/tx2-nx-source_r32.6/Linux_for_Tegra/source/public/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01.dts [ 0.271084] DTB Build time: [ 0.323006] CPU1: Booted secondary processor [4e0f0030] [ 0.354381] CPU2: Booted secondary processor [4e0f0030] [ 0.385391] CPU3: Booted secondary processor [411fd073] [ 0.417364] CPU4: Booted secondary processor [411fd073] [ 0.449352] CPU5: Booted secondary processor [411fd073] [ 0.449408] Brought up 6 CPUs [ 0.479893] SMP: Total of 6 processors activated. [ 0.484832] CPU features: detected feature: 32-bit EL0 Support [ 0.493316] CPU: All CPU(s) started at EL2 [ 0.497786] alternatives: patching kernel code [ 0.505040] devtmpfs: initialized [ 0.532063] Initilizing CustomIPI irq domain [ 0.536700] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.546927] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.561422] pinctrl core: initialized pinctrl subsystem [ 0.567143] OS set in device tree is not L4T. [ 0.571885] regulator-dummy: no parameters [ 0.576344] Initializing plugin-manager [ 0.580433] Plugin module not found [ 0.584127] Plugin-manager status disabled [ 0.589527] NET: Registered protocol family 16 [ 0.595128] pstore: using zlib compression [ 0.599695] console [pstore-1] enabled [ 0.603631] pstore: Registered ramoops as persistent store backend [ 0.610118] ramoops: attached 0x200000@0x175880000, ecc: 0/0 [ 0.628921] cpuidle: using governor menu [ 0.633973] bpmp: waiting for handshake [ 0.638006] bpmp: handshake completed [ 0.641385] random: fast init done [ 0.645437] bpmp: synchronizing channels [ 0.649559] bpmp: channels synchronized [ 0.653585] bpmp: mail init ok [ 0.658238] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.665082] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.670017] arm-smmu 12000000.iommu: stage 1 translation [ 0.675670] arm-smmu 12000000.iommu: stage 2 translation [ 0.681342] arm-smmu 12000000.iommu: nested translation [ 0.686918] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.695686] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.706726] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.713666] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.720514] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.729120] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009ea4000) [ 0.736909] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.745410] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.755063] Registering BPMP clocks... [ 0.759067] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.765196] Serial: AMBA PL011 UART driver [ 0.770381] tegra_powergate_init: DONE [ 0.774327] DTS File Name: /home/zhujinping/dumu/nvidia/tx2-nx-source_r32.6/Linux_for_Tegra/source/public/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01.dts [ 0.797293] DTB Build time: [ 0.802390] Tegra reboot handler registered. [ 0.808022] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.815311] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.821627] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.828029] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.834334] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.839702] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.847301] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.853874] iommu: Adding device 3460000.sdhci to group 0 [ 0.859941] iommu: Adding device 3440000.sdhci to group 1 [ 0.866548] iommu: Adding device 3160000.i2c to group 2 [ 0.872457] iommu: Adding device c240000.i2c to group 3 [ 0.878243] iommu: Adding device 3180000.i2c to group 4 [ 0.884013] iommu: Adding device 3190000.i2c to group 5 [ 0.889879] iommu: Adding device 31b0000.i2c to group 6 [ 0.895643] iommu: Adding device 31c0000.i2c to group 7 [ 0.901427] iommu: Adding device c250000.i2c to group 8 [ 0.907199] iommu: Adding device 31e0000.i2c to group 9 [ 0.914161] iommu: Adding device 3210000.spi to group 10 [ 0.920035] iommu: Adding device c260000.spi to group 11 [ 0.925922] iommu: Adding device 3100000.serial to group 12 [ 0.932062] iommu: Adding device 3110000.serial to group 13 [ 0.938193] iommu: Adding device 3130000.serial to group 14 [ 0.945203] iommu: Adding device 2490000.ether_qos to group 15 [ 0.951340] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.958190] iommu: Adding device b000000.rtcpu to group 16 [ 0.965649] iommu: Adding device 13e10000.host1x to group 17 [ 0.971874] iommu: Adding device 13e10000.host1x:ctx0 to group 18 [ 0.978562] iommu: Adding device 13e10000.host1x:ctx1 to group 19 [ 0.985240] iommu: Adding device 13e10000.host1x:ctx2 to group 20 [ 0.991919] iommu: Adding device 13e10000.host1x:ctx3 to group 21 [ 0.998606] iommu: Adding device 13e10000.host1x:ctx4 to group 22 [ 1.005286] iommu: Adding device 13e10000.host1x:ctx5 to group 23 [ 1.011975] iommu: Adding device 13e10000.host1x:ctx6 to group 24 [ 1.018661] iommu: Adding device 13e10000.host1x:ctx7 to group 25 [ 1.025475] iommu: Adding device 150c0000.nvcsi to group 26 [ 1.031871] iommu: Adding device 15700000.vi to group 27 [ 1.037752] iommu: Adding device 15600000.isp to group 28 [ 1.043618] iommu: Adding device 15200000.dc_common to group 29 [ 1.050353] iommu: Adding device 15200000.nvdisplay to group 30 [ 1.056866] iommu: Adding device 15210000.nvdisplay to group 31 [ 1.063381] iommu: Adding device 15340000.vic to group 32 [ 1.069241] iommu: Adding device 154c0000.nvenc to group 33 [ 1.075290] iommu: Adding device 15480000.nvdec to group 34 [ 1.081429] iommu: Adding device 15380000.nvjpg to group 35 [ 1.087483] iommu: Adding device 15500000.tsec to group 36 [ 1.093437] iommu: Adding device 15100000.tsecb to group 37 [ 1.100165] iommu: Adding device 15810000.se to group 38 [ 1.105933] iommu: Adding device 15820000.se to group 39 [ 1.111699] iommu: Adding device 15830000.se to group 40 [ 1.117461] iommu: Adding device 15840000.se to group 41 [ 1.123794] iommu: Adding device smmu_test to group 42 [ 1.129753] mc: mapped MMIO address: 0xffffff800a710000 -> 0x2c10000 [ 1.136442] mc: mapped MMIO address: 0xffffff800a730000 -> 0x2c20000 [ 1.143108] mc: mapped MMIO address: 0xffffff800a750000 -> 0x2c30000 [ 1.149769] mc: mapped MMIO address: 0xffffff800a770000 -> 0x2c40000 [ 1.156427] mc: mapped MMIO address: 0xffffff800a790000 -> 0x2c50000 [ 1.163096] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 1.168406] mc-err: mcerr ops are set to t18x [ 1.173115] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 1.180213] iommu: Adding device 3530000.xhci to group 43 [ 1.185893] arm-smmu: forcing sodev map for 3530000.xhci [ 1.191852] iommu: Adding device 3550000.xudc to group 44 [ 1.197539] arm-smmu: forcing sodev map for 3550000.xudc [ 1.203618] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 1.210386] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 1.216597] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 1.224572] iommu: Adding device 17000000.gp10b to group 45 [ 1.231342] tegra-reset 5000000.clock: registered 193 resets. [ 1.239221] iommu: Adding device d000000.bpmp to group 46 [ 1.245091] bpmp: ping status is 0 [ 1.248727] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 1.258038] bpmp d000000.bpmp: probe ok [ 1.264565] iommu: Adding device 2600000.dma to group 47 [ 1.270953] GPIO line 424 (camera-control-output-low) hogged as output/low [ 1.278212] GPIO line 427 (camera-control-output-low) hogged as output/low [ 1.285479] GPIO line 408 (w-disable1) hogged as output/high [ 1.291453] GPIO line 410 (w-disable2) hogged as output/high [ 1.297425] GPIO line 338 (gpio12) hogged as output/high [ 1.303040] GPIO line 485 (gpio13) hogged as output/high [ 1.308774] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 1.321577] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 1.332449] iommu: Adding device 10003000.pcie-controller to group 48 [ 1.339240] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 1.346205] iommu: Adding device sound to group 49 [ 1.351551] iommu: Adding device 3510000.hda to group 50 [ 1.363757] iommu: Adding device c1a0000.aon to group 51 [ 1.369872] vdd-1v8-ap: 1800 mV [ 1.373486] vdd-ac-bat: 5000 mV [ 1.377069] vdd-3v3-disp-cvb: 3300 mV [ 1.381288] vdd-3v3-cvb: 3300 mV [ 1.384967] vdd-1v8-cvb: 1800 mV [ 1.388630] vdd-fan: 5000 mV [ 1.391937] vdd-hdmi-5v0: 5000 mV [ 1.395701] vdd_sys_en: 1200 mV [ 1.425344] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.434596] eventlib_kernel: keventlib is initialized, test id: 0 [ 1.441206] SCSI subsystem initialized [ 1.445252] libata version 3.00 loaded. [ 1.445422] usbcore: registered new interface driver usbfs [ 1.451252] usbcore: registered new interface driver hub [ 1.456863] usbcore: registered new device driver usb [ 1.471098] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 1.481528] vddio-ddr: at 1125 mV [ 1.489396] avdd_dsi_csi: 1200 mV [ 1.497376] vdd-1v8: 1800 mV [ 1.505371] vdd-3v3-sys: 3300 mV [ 1.509696] spmic-ldo0: at 1800 mV [ 1.514002] spmic-ldo1: at 800 mV [ 1.521374] vddio-3v3: 3300 mV [ 1.525322] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 1.533374] vdd-rtc: at 800 mV [ 1.537320] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 1.545374] spmic-ldo6: at 800 mV [ 1.553372] vdd-pex-1v00: 1000 mV [ 1.557525] dvdd-pex: 1000 mV [ 1.562756] GPIO line 253 (spmic_gpio_input) hogged as input [ 1.568836] GPIO line 254 (spmic_gpio_input) hogged as input [ 1.574938] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 1.584339] max77620 4-003c: max77620 probe successful [ 1.590098] media: Linux media interface: v0.10 [ 1.594878] Linux video capture interface: v2.00 [ 1.602928] pps_core: LinuxPPS API ver. 1 registered [ 1.608150] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.617745] PTP clock support registered [ 1.622043] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 1.629165] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 1.636668] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 1.644369] trusty trusty: trusty version: Built: 12:20:14 Jul 26 2021 [ 1.651339] trusty trusty: selected api version: 3 (requested 3) [ 1.658364] Advanced Linux Sound Architecture Driver Initialized. [ 1.665101] Bluetooth: Core ver 2.22 [ 1.668867] NET: Registered protocol family 31 [ 1.673535] Bluetooth: HCI device and connection manager initialized [ 1.680207] Bluetooth: HCI socket layer initialized [ 1.685331] Bluetooth: L2CAP socket layer initialized [ 1.690643] Bluetooth: SCO socket layer initialized [ 1.696312] vdd-sys-bl: 3300 mV [ 1.701210] camchar: rtcpu character device driver loaded [ 1.707288] gpio tegra-gpio wake61 for gpio=92(L:4) [ 1.712491] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 1.721651] clocksource: Switched to clocksource arch_sys_counter [ 1.750351] VFS: Disk quotas dquot_6.6.0 [ 1.754562] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.762029] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.769303] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.771774] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 1.777320] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 1.777496] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 1.777849] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 1.777917] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 1.778049] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.778259] la/ptsa driver initialized. [ 1.778267] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 1.778269] pre_t19x_iso_plat_init(): max_iso_bw=23040000KB [ 1.778557] NET: Registered protocol family 2 [ 1.779187] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 1.779343] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 1.779641] TCP: Hash tables configured (established 32768 bind 32768) [ 1.779689] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.779747] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.780014] NET: Registered protocol family 1 [ 1.780909] RPC: Registered named UNIX socket transport module. [ 1.780912] RPC: Registered udp transport module. [ 1.780913] RPC: Registered tcp transport module. [ 1.780915] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.780921] PCI: CLS 0 bytes, default 64 [ 1.781031] Trying to unpack rootfs image as initramfs... [ 1.920487] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.927171] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.936476] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 1.943336] nvmap_page_pool_init: Total RAM pages: 977415 [ 1.949001] nvmap_page_pool_init: nvmap page pool size: 122176 pages (477 MB) [ 1.956571] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.957071] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.988461] Freeing initrd memory: 7068K [ 2.007097] host1x 13e10000.host1x: initialized [ 2.013079] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 2.023330] audit: initializing netlink subsys (disabled) [ 2.029047] audit: type=2000 audit(1.548:1): initialized [ 2.035037] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 2.048425] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.055561] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.060654] 9p: Installing v9fs 9p2000 file system support [ 2.068638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 2.076481] io scheduler noop registered [ 2.080800] io scheduler cfq registered (default) [ 2.088570] gic 2a41000.agic-controller: GIC IRQ controller registered [ 2.108861] iommu: Adding device aconnect@2a41000:adsp_audio to group 52 [ 2.136860] iommu: Adding device 2993000.adsp to group 53 [ 2.142987] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 2.156542] tegra-pcie 10003000.pcie-controller: 2x1, 1x1, 1x1 configuration [ 2.164665] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 2.165972] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 2.166081] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 2.193466] tegra-pcie 10003000.pcie-controller: probing port 0, using 2 lanes [ 2.201220] tsec 15500000.tsec: initialized [ 2.203204] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 2.214105] tsec 15100000.tsecb: initialized [ 2.220724] nvdec 15480000.nvdec: initialized [ 2.229137] falcon 15340000.vic: initialized [ 2.234781] falcon 154c0000.nvenc: initialized [ 2.240518] falcon 15380000.nvjpg: initialized [ 2.247200] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 2.256158] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 2.265141] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 2.274123] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 2.279433] tegra-pcie 10003000.pcie-controller: PCI host bridge to bus 0000:00 [ 2.279438] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.279441] pci_bus 0000:00: root bus resource [mem 0x40100000-0x47ffffff] [ 2.279445] pci_bus 0000:00: root bus resource [mem 0x48000000-0x7fffffff pref] [ 2.279448] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.279477] pci 0000:00:01.0: [10de:10e5] type 01 class 0x060400 [ 2.279591] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.279772] iommu: Adding device 0000:00:01.0 to group 54 [ 2.279779] arm-smmu: forcing sodev map for 0000:00:01.0 [ 2.279856] pci 0000:00:03.0: [10de:10e6] type 01 class 0x060400 [ 2.279964] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.280127] iommu: Adding device 0000:00:03.0 to group 55 [ 2.280131] arm-smmu: forcing sodev map for 0000:00:03.0 [ 2.280186] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.280200] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.280360] pci 0000:01:00.0: [1d97:1160] type 00 class 0x010802 [ 2.280423] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.280446] pci 0000:01:00.0: reg 0x18: [io 0x0000-0x00ff] [ 2.280955] iommu: Adding device 0000:01:00.0 to group 56 [ 2.280959] arm-smmu: forcing sodev map for 0000:01:00.0 [ 2.281000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.281164] pci 0000:02:00.0: [197b:0585] type 00 class 0x010601 [ 2.281210] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x007f] [ 2.281234] pci 0000:02:00.0: reg 0x14: [io 0x0000-0x007f] [ 2.281257] pci 0000:02:00.0: reg 0x18: [io 0x0000-0x007f] [ 2.281281] pci 0000:02:00.0: reg 0x1c: [io 0x0000-0x007f] [ 2.281304] pci 0000:02:00.0: reg 0x20: [io 0x0000-0x007f] [ 2.281328] pci 0000:02:00.0: reg 0x24: [mem 0x00000000-0x00001fff] [ 2.281352] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.281621] pci 0000:02:00.0: PME# supported from D3hot [ 2.281862] iommu: Adding device 0000:02:00.0 to group 57 [ 2.281865] arm-smmu: forcing sodev map for 0000:02:00.0 [ 2.281917] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 2.281982] pci 0000:00:01.0: BAR 14: assigned [mem 0x40100000-0x401fffff] [ 2.281985] pci 0000:00:03.0: BAR 14: assigned [mem 0x40200000-0x402fffff] [ 2.281989] pci 0000:00:01.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.281992] pci 0000:00:03.0: BAR 13: assigned [io 0x2000-0x2fff] [ 2.281999] pci 0000:01:00.0: BAR 0: assigned [mem 0x40100000-0x40103fff 64bit] [ 2.282031] pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x10ff] [ 2.282043] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.282047] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 2.282055] pci 0000:00:01.0: bridge window [mem 0x40100000-0x401fffff] [ 2.282069] pci 0000:02:00.0: BAR 6: assigned [mem 0x40200000-0x4020ffff pref] [ 2.282073] pci 0000:02:00.0: BAR 5: assigned [mem 0x40210000-0x40211fff] [ 2.282084] pci 0000:02:00.0: BAR 0: assigned [io 0x2000-0x207f] [ 2.282096] pci 0000:02:00.0: BAR 1: assigned [io 0x2080-0x20ff] [ 2.282107] pci 0000:02:00.0: BAR 2: assigned [io 0x2100-0x217f] [ 2.282119] pci 0000:02:00.0: BAR 3: assigned [io 0x2180-0x21ff] [ 2.282130] pci 0000:02:00.0: BAR 4: assigned [io 0x2200-0x227f] [ 2.282141] pci 0000:00:03.0: PCI bridge to [bus 02] [ 2.282145] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff] [ 2.282153] pci 0000:00:03.0: bridge window [mem 0x40200000-0x402fffff] [ 2.282164] PCIE: ASPM not enabled [ 2.282352] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 2.282355] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.282362] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 2.282452] aer 0000:00:01.0:pcie002: service driver aer loaded [ 2.282649] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 2.282652] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.282659] pcie_pme 0000:00:03.0:pcie001: service driver pcie_pme loaded [ 2.282740] aer 0000:00:03.0:pcie002: service driver aer loaded [ 2.536828] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 2.545804] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 2.554780] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 2.563737] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 2.573842] tegradccommon 15200000.dc_common: host1x channel mapped [ 2.580431] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 2.585052] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 2.585549] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 2.585568] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 2.585925] kfuse 3830000.kfuse: initialized [ 2.587057] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 2.589751] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.591755] console [ttyS0] disabled [ 2.632897] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 33, base_baud = 25500000) is a Tegra [ 2.632899] tegradccommon 15200000.dc_common: dma mapping done [ 2.633279] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 2.633311] generic_infoframe_type: 0x87 [ 2.633369] tegradc 15200000.nvdisplay: DT parsed successfully [ 2.633389] tegradc 15200000.nvdisplay: Display dc.ffffff800abc0000 registered with id=0 [ 2.636854] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 2.636857] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 2.636859] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 2.636991] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 2.636995] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 2.639362] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 2.639365] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 2.642449] tegradc 15200000.nvdisplay: probed [ 2.734337] Console: switching to colour frame buffer device 80x30 [ 2.740848] tegradc 15200000.nvdisplay: fb registered [ 2.741006] gpio tegra-gpio wake21 for gpio=121(P:1) [ 2.741381] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 2.741488] tegradc 15210000.nvdisplay: DT parsed successfully [ 2.741509] tegradc 15210000.nvdisplay: Display dc.ffffff800abe0000 registered with id=1 [ 2.741709] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 2.741713] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 2.751827] tegradc 15210000.nvdisplay: probed [ 2.839321] tegradc 15210000.nvdisplay: fb registered [ 2.839326] console [ttyS0] enabled [ 2.839329] bootconsole [uart8250] disabled [ 2.866688] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 34, base_baud = 0) is a TEGRA_UART [ 2.875587] serial-tegra 3130000.serial: RX in PIO mode [ 2.876445] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 2.876448] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 2.876455] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 2.901292] tegradc 15210000.nvdisplay: blank - powerdown [ 2.901851] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 35, base_baud = 0) is a TEGRA_UART [ 2.902783] [drm] Initialized [ 2.918392] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 2.920299] brd: module loaded [ 2.929864] Extcon DP: HPD disabled [ 2.933373] hpd: hpd_switch 0 [ 2.936378] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 2.943033] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 2.948991] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 2.954215] loop: module loaded [ 2.954259] tegra_profiler: version: 1.145, samples/io: 49/28 [ 2.954341] tegra_profiler: auth: init [ 2.954937] THERMAL EST: found 3 subdevs [ 2.954940] THERMAL EST num_resources: 0 [ 2.954947] [THERMAL EST subdev 0] [ 2.954950] [THERMAL EST subdev 1] [ 2.954953] [THERMAL EST subdev 2] [ 2.954960] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.955221] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 2.955222] THERMAL EST: thz register success. [ 2.955300] THERMAL EST: end of probe, return err: 0 [ 2.955844] sd: No Scsi addr parsed to reserve index [ 2.955865] hisi_sas: driver version v1.6 [ 2.959208] nvme nvme0: pci function 0000:01:00.0 [ 2.959234] nvme 0000:01:00.0: enabling device (0000 -> 0002) [ 2.959349] ahci 0000:02:00.0: version 3.0 [ 2.959372] ahci 0000:02:00.0: enabling device (0000 -> 0003) [ 2.959670] ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled [ 2.959673] tegra-pcie 10003000.pcie-controller: PCIE: Response decoding error, signature: 10120005 [ 2.959740] ahci 0000:02:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x3 impl SATA mode [ 2.959743] nvme nvme0: Minimum device page size 134217728 too large for host (4096) [ 2.959747] ahci 0000:02:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs pio slum part ccc apst boh [ 2.959749] nvme nvme0: Removing after probe failure status: -19 [ 2.961232] scsi host0: ahci [ 2.961664] scsi host1: ahci [ 2.961903] scsi host2: ahci [ 2.962127] scsi host3: ahci [ 2.962346] scsi host4: ahci [ 2.962491] ata1: SATA max UDMA/133 abar m8192@0x40210000 port 0x40210100 irq 453 [ 2.962496] ata2: SATA max UDMA/133 abar m8192@0x40210000 port 0x40210180 irq 453 [ 2.962498] ata3: DUMMY [ 2.962500] ata4: DUMMY [ 2.962501] ata5: DUMMY [ 2.966742] libphy: Fixed MDIO Bus: probed [ 2.967164] tun: Universal TUN/TAP device driver, 1.6 [ 2.967166] tun: (C) 1999-2004 Max Krasnyansky [ 2.969258] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.969260] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.969298] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 2.969299] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.969333] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 2.969335] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 2.969367] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 2.969369] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 3.213685] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 3.222110] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 3.229690] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 3b 5d 12 [ 3.236412] Using phyrst_lpmode = 1 from DT [ 3.240671] libphy: dwc_phy: probed [ 3.246248] PPP generic driver version 2.4.2 [ 3.250655] PPP BSD Compression module registered [ 3.255372] PPP Deflate Compression module registered [ 3.260440] PPP MPPE Compression module registered [ 3.265250] NET: Registered protocol family 24 [ 3.269745] usbcore: registered new interface driver r8152 [ 3.275270] usbcore: registered new interface driver asix [ 3.275869] ata1: SATA link down (SStatus 0 SControl 300) [ 3.286124] usbcore: registered new interface driver ax88179_178a [ 3.292296] usbcore: registered new interface driver cdc_ether [ 3.298164] usbcore: registered new interface driver net1080 [ 3.303857] usbcore: registered new interface driver cdc_subset [ 3.309810] usbcore: registered new interface driver zaurus [ 3.315422] usbcore: registered new interface driver cdc_ncm [ 3.321197] VFIO - User Level meta-driver version: 0.3 [ 3.327134] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.333676] ehci-pci: EHCI PCI platform driver [ 3.338156] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.344343] ohci-pci: OHCI PCI platform driver [ 3.348820] ohci-platform: OHCI generic platform driver [ 3.357453] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 3.364576] tegra-xusb 3530000.xhci: extcon 0: ffffffc0efaef000 id [ 3.371488] usbcore: registered new interface driver uas [ 3.376834] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 3.376856] tegra-xusb 3530000.xhci: xHCI Host Controller [ 3.376870] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 3.377584] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 3.377636] tegra-xusb 3530000.xhci: irq 68, io mem 0x03530000 [ 3.377788] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.377792] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.377796] usb usb1: Product: xHCI Host Controller [ 3.377799] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 3.377801] usb usb1: SerialNumber: 3530000.xhci [ 3.378131] hub 1-0:1.0: USB hub found [ 3.378159] hub 1-0:1.0: 4 ports detected [ 3.378506] tegra-xusb 3530000.xhci: xHCI Host Controller [ 3.378513] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 3.378646] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.378650] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.378653] usb usb2: Product: xHCI Host Controller [ 3.378656] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 3.378658] usb usb2: SerialNumber: 3530000.xhci [ 3.378937] hub 2-0:1.0: USB hub found [ 3.378961] hub 2-0:1.0: 3 ports detected [ 3.379492] Wake76 for irq=199 [ 3.379494] Wake77 for irq=199 [ 3.379495] Wake78 for irq=199 [ 3.379496] Wake79 for irq=199 [ 3.379498] Wake80 for irq=199 [ 3.379499] Wake81 for irq=199 [ 3.379500] Wake82 for irq=199 [ 3.379525] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 3.379529] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 3.481928] usb usb2: usb_suspend_both: status 0 [ 3.539543] usbcore: registered new interface driver usb-storage [ 3.545638] usbcore: registered new interface driver usbserial [ 3.554426] tegra-xudc-new 3550000.xudc: device count: 1 [ 3.560749] tegra-xudc-new 3550000.xudc: USB charger detection disabled [ 3.567386] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 3.572544] tegra-xudc-new 3550000.xudc: entering ELPG [ 3.574022] mousedev: PS/2 mouse device common for all mice [ 3.574073] usbcore: registered new interface driver xpad [ 3.589579] tegra-xudc-new 3550000.xudc: entering ELPG done [ 3.590004] ata2: SATA link down (SStatus 0 SControl 300) [ 3.705618] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 3.719109] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.727521] Wake73 for irq=42 [ 3.731674] rtc rtc1: alarm rtc device [ 3.735443] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 3.738799] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 3.738804] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.738807] usb 1-2: Product: 4-Port USB 2.1 Hub [ 3.738809] usb 1-2: Manufacturer: Generic [ 3.739565] hub 1-2:1.0: USB hub found [ 3.740137] hub 1-2:1.0: 4 ports detected [ 3.772731] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.779003] i2c /dev entries driver [ 3.783834] i2c i2c-2: Added multiplexed i2c bus 9 [ 3.788901] i2c i2c-2: Added multiplexed i2c bus 10 [ 3.793791] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 3.801198] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.811991] parse_throttle_dt_data: Num cap clks = 4 [ 3.816968] parse_throttle_dt_data: clk=mcpu type=1 [ 3.821854] parse_throttle_dt_data: clk=bcpu type=2 [ 3.826741] parse_throttle_dt_data: clk=gpu type=4 [ 3.831536] parse_throttle_dt_data: clk=emc type=3 [ 3.836945] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.843097] FAN dev name: pwm-fan [ 3.846478] FAN:gpio request success. [ 3.850076] usb 2-2: new SuperSpeed USB device number 2 using tegra-xusb [ 3.856854] FAN: can't find tach_gpio [ 3.860529] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 3.867772] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 3.874140] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 3.878384] usb 2-2: New USB device found, idVendor=0bda, idProduct=0411 [ 3.878388] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.878392] usb 2-2: Product: 4-Port USB 3.1 Hub [ 3.878394] usb 2-2: Manufacturer: Generic [ 3.883675] hub 2-2:1.0: USB hub found [ 3.884870] hub 2-2:1.0: 4 ports detected [ 3.889623] usb 1-2: usb_suspend_both: status 0 [ 3.916891] device-mapper: uevent: version 1.0.3 [ 3.921838] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.930525] CPU EMC frequency mapping table: from device tree [ 3.938096] cpufreq: platform driver Initialization: pass [ 3.944038] cpuidle: Initializing cpuidle driver init for Denver cluster [ 3.950865] cpuidle: Initializing cpuidle driver init for A57 cluster [ 3.958163] sdhci: Secure Digital Host Controller Interface driver [ 3.964350] sdhci: Copyright(c) Pierre Ossman [ 3.968708] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.975329] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 3.984045] CMDQ: cmdq_platfm_init successful [ 3.989326] CQE: CMD_TIMING bit set for R1B DCMD [ 3.990425] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 3.992154] sdhci-tegra 3440000.sdhci: wakeup init done, cdirq 287 [ 3.992258] sdhci-tegra 3440000.sdhci: Failed getting OCR mask: 0 [ 3.994791] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 3.999238] tegra-se-nvhost 15810000.se: initialized [ 4.000313] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 4.000786] tegra-se-nvhost 15820000.se: initialized [ 4.001807] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 4.002276] tegra-se-nvhost 15830000.se: initialized [ 4.003052] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 4.003479] tegra-se-nvhost 15840000.se: initialized [ 4.004385] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 4.005773] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.005897] hidraw: raw HID events driver (C) Jiri Kosina [ 4.006762] usbcore: registered new interface driver usbhid [ 4.006764] usbhid: USB HID core driver [ 4.011373] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 4.013043] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 4.013243] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.013361] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x1900-0x3980 TX[64x128]=0x3980-0x5a00 [ 4.014086] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x5a00-0x5ac0 TX[1x64]=0x5ac0-0x5b80 [ 4.014166] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x5b80-0x7000 TX[16x320]=0x7000-0x8480 [ 4.014217] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8480-0x8900 TX[16x64]=0x8900-0x8d80 [ 4.014266] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x8d80-0x8f80 TX[1x384]=0x8f80-0x9180 [ 4.014360] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9180-0xb200 TX[1x8192]=0xb200-0xd280 [ 4.014648] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (48) [ 4.014650] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 4.015141] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 4.016703] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.017086] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.017483] register_ari_mca_banks: Registered MCA ROC:IOB [ 4.017824] register_ari_mca_banks: Registered MCA ROC:CCE [ 4.018559] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 4.018561] tegra18-bridge 2390000.axi2apb: enabled timeout = 9894000 [ 4.018563] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 4.018608] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 4.018610] tegra18-bridge 23a0000.axi2apb: enabled timeout = 9894000 [ 4.018612] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 4.018653] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 4.018655] tegra18-bridge 23b0000.axi2apb: enabled timeout = 9894000 [ 4.018656] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 4.018697] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 4.018698] tegra18-bridge 23c0000.axi2apb: enabled timeout = 9894000 [ 4.018700] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 4.018749] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 4.018750] tegra18-bridge 23d0000.axi2apb: enabled timeout = 9894000 [ 4.018752] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 4.018794] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 4.018799] tegra18-bridge 2100000.axip2p: enabled timeout = 9894000 [ 4.018800] tegra18-bridge 2100000.axip2p: bridge probed OK [ 4.018841] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 4.018846] tegra18-bridge 2110000.axip2p: enabled timeout = 9894000 [ 4.018847] tegra18-bridge 2110000.axip2p: bridge probed OK [ 4.018887] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 4.018891] tegra18-bridge 2120000.axip2p: enabled timeout = 9894000 [ 4.018893] tegra18-bridge 2120000.axip2p: bridge probed OK [ 4.018934] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 4.018939] tegra18-bridge 2130000.axip2p: enabled timeout = 9894000 [ 4.018940] tegra18-bridge 2130000.axip2p: bridge probed OK [ 4.018980] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 4.018982] tegra18-bridge 2140000.axip2p: enabled timeout = 9894000 [ 4.018983] tegra18-bridge 2140000.axip2p: bridge probed OK [ 4.019022] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 4.019027] tegra18-bridge 2150000.axip2p: enabled timeout = 9894000 [ 4.019028] tegra18-bridge 2150000.axip2p: bridge probed OK [ 4.019066] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 4.019071] tegra18-bridge 2160000.axip2p: enabled timeout = 9894000 [ 4.019072] tegra18-bridge 2160000.axip2p: bridge probed OK [ 4.019109] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 4.019114] tegra18-bridge 2170000.axip2p: enabled timeout = 9894000 [ 4.019116] tegra18-bridge 2170000.axip2p: bridge probed OK [ 4.019155] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 4.019160] tegra18-bridge 2180000.axip2p: enabled timeout = 9894000 [ 4.019161] tegra18-bridge 2180000.axip2p: bridge probed OK [ 4.019176] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610 [ 4.019179] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.019182] usb 1-3: Product: USB2.0 Hub [ 4.019201] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 4.019205] tegra18-bridge 2190000.axip2p: enabled timeout = 9894000 [ 4.019206] tegra18-bridge 2190000.axip2p: bridge probed OK [ 4.019260] **** A57 ECC: Enabled [ 4.019262] tegra18_a57_serr_init: on CPU 4 a A57 Core [ 4.019320] tegra18x_actmon d230000.actmon: in actmon_register()... [ 4.019700] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 4.019981] hub 1-3:1.0: USB hub found [ 4.020098] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 4.020213] denver_knobs_init:MTS_VERSION:53679346 [ 4.020286] hub 1-3:1.0: 4 ports detected [ 4.021860] nvpmodel: initialized successfully [ 4.025544] trusty-virtio trusty:virtio: initializing [ 4.025697] trusty_ipc virtio0: vring0: va(pa) ffffffc0edd68000(0) qsz 32 notifyid 1 [ 4.025703] trusty_ipc virtio0: vring1: va(pa) ffffffc0edd6a000(0) qsz 32 notifyid 2 [ 4.025765] trusty-virtio trusty:virtio: initializing done [ 4.026740] usbcore: registered new interface driver snd-usb-audio [ 4.031727] trusty_ipc virtio0: is online [ 4.041693] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.044476] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 4.044677] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 4.049631] usb 2-2: usb_suspend_both: status 0 [ 4.049926] usb usb2: usb_suspend_both: status 0 [ 4.051685] OPE platform probe [ 4.051751] OPE platform probe successful [ 4.061810] FAN rising trip_level:2 cur_temp:60400 trip_temps[3]:68000 [ 4.097784] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 4.097857] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 4.097927] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 4.097992] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 4.098058] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 4.098123] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 4.098243] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 4.098309] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 4.098372] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 4.098438] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 4.098507] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 4.098574] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 4.098642] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 4.098752] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 4.098833] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 4.098901] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 4.098967] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 4.099033] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 4.099101] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 4.099167] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 4.118279] u32 classifier [ 4.118280] Actions configured [ 4.118340] Initializing XFRM netlink socket [ 4.118866] NET: Registered protocol family 10 [ 4.119440] NET: Registered protocol family 17 [ 4.119447] NET: Registered protocol family 15 [ 4.119504] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.119548] Bluetooth: RFCOMM socket layer initialized [ 4.119556] Bluetooth: RFCOMM ver 1.11 [ 4.119559] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.119562] Bluetooth: HIDP socket layer initialized [ 4.119576] 9pnet: Installing 9P2000 support [ 4.119603] Key type dns_resolver registered [ 4.123852] Registered cp15_barrier emulation handler [ 4.123865] Registered setend emulation handler [ 4.124734] registered taskstats version 1 [ 4.127245] isp 15600000.isp: initialized [ 4.130363] nvcsi 150c0000.nvcsi: initialized [ 4.131266] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 4.133665] FAN dev name: pwm-fan [ 4.133714] FAN:gpio request success. [ 4.133720] FAN: can't find tach_gpio [ 4.133726] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 4.133740] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 4.134373] Wake83 for irq=51 [ 4.134457] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 4.134579] input: gpio-keys as /devices/gpio-keys/input/input2 [ 4.134930] FAN dev name: pwm-fan [ 4.134965] FAN:gpio request success. [ 4.134969] FAN: can't find tach_gpio [ 4.134974] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 4.134986] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 4.135098] tegra-vi4 15700000.vi: initialized [ 4.135987] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound [ 4.136062] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 4.137188] FAN dev name: pwm-fan [ 4.137224] FAN:gpio request success. [ 4.137229] FAN: can't find tach_gpio [ 4.137235] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 4.137246] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 4.165608] usb 1-3: usb_suspend_both: status 0 [ 4.165679] usb usb1: usb_suspend_both: status 0 [ 4.167900] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:12 UTC (946688412) [ 4.185426] bpmp: mounted debugfs mirror [ 4.186321] bwmgr: missing cdev-type property [ 4.190491] ALSA device list: [ 4.190495] #0: tegra-hda at 0x3518000 irq 381 [ 4.190496] #1: tegra-snd-t186ref-mobile-rt565x [ 5.038885] Freeing unused kernel memory: 8640K [ 5.064472] Root device found: mmcblk0p1 [ 5.081625] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 5.135315] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 5.156838] mmc0: periodic cache flush enabled [ 5.161290] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 5.167977] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 5.172612] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 5.182703] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 5.188732] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 5.200491] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 [ 5.217225] FAN dev name: pwm-fan [ 5.220611] FAN:gpio request success. [ 5.224281] FAN: can't find tach_gpio [ 5.227964] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 5.235206] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 5.272595] Found dev node: /dev/mmcblk0p1 [ 5.381651] tegra-xusb 3530000.xhci: entering ELPG [ 5.389422] tegra-xusb 3530000.xhci: entering ELPG done [ 5.492825] EXT4-fs (mmcblk0p1): recovery complete [ 5.498337] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.508354] Rootfs mounted over mmcblk0p1 [ 5.524905] Switching from initrd to actual rootfs [ 5.602824] systemd[1]: System time before build time, advancing clock. [ 5.625296] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.639271] cgroup: cgroup2: unknown option "nsdelegate" [ 5.653472] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.675638] systemd[1]: Detected architecture arm64. [ 5.710017] systemd[1]: Set hostname to . [ 5.791845] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 5.808960] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 5.929165] random: systemd: uninitialized urandom read (16 bytes read) [ 5.937286] systemd[1]: Created slice System Slice. [ 5.953718] random: systemd: uninitialized urandom read (16 bytes read) [ 5.960572] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.977681] random: systemd: uninitialized urandom read (16 bytes read) [ 5.984380] systemd[1]: Listening on udev Kernel Socket. [ 6.001681] systemd[1]: Reached target Swap. [ 6.019077] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.146200] FAN dev name: pwm-fan [ 6.152290] FAN:gpio request success. [ 6.156068] FAN: can't find tach_gpio [ 6.159744] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 6.166996] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 6.342403] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 6.983098] systemd-journald[2675]: Received request to flush runtime journal from PID 1 [ 7.393822] bcpu-throttle-alert cooling device registered. [ 7.394276] FAN dev name: pwm-fan [ 7.394328] FAN:gpio request success. [ 7.394333] FAN: can't find tach_gpio [ 7.394343] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 7.394361] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 7.396482] mcpu-throttle-alert cooling device registered. [ 7.396960] FAN dev name: pwm-fan [ 7.397016] FAN:gpio request success. [ 7.397022] FAN: can't find tach_gpio [ 7.397030] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 7.397047] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 7.398675] gpu-throttle-alert cooling device registered. [ 7.399072] FAN dev name: pwm-fan [ 7.399125] FAN:gpio request success. [ 7.399132] FAN: can't find tach_gpio [ 7.399140] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 7.399156] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 7.960257] random: crng init done [ 7.963669] random: 7 urandom warning(s) missed due to ratelimiting [ 8.140440] using random self ethernet address [ 8.153662] using random host ethernet address [ 8.617358] Mass Storage Function, version: 2009/09/11 [ 8.617366] LUN: removable file: (no medium) [ 8.623563] using random self ethernet address [ 8.636739] using random host ethernet address [ 8.654070] rndis0: HOST MAC a2:4d:2a:34:8f:7c [ 8.654343] rndis0: MAC a2:4d:2a:34:8f:7d [ 8.657647] usb0: HOST MAC a2:4d:2a:34:8f:7e [ 8.657677] usb0: MAC a2:4d:2a:34:8f:7f [ 8.657696] tegra-xudc-new 3550000.xudc: exiting ELPG [ 8.660727] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 8.660746] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 8.660773] tegra-xudc-new 3550000.xudc: entering ELPG [ 8.661726] tegra-xudc-new 3550000.xudc: entering ELPG done [ 8.661799] tegra-xudc-new 3550000.xudc: exiting ELPG [ 8.663136] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 8.663150] tegra-xudc-new 3550000.xudc: entering ELPG [ 8.664132] tegra-xudc-new 3550000.xudc: entering ELPG done [ 8.666469] l4tbr0: port 1(rndis0) entered blocking state [ 8.666473] l4tbr0: port 1(rndis0) entered disabled state [ 8.667226] device rndis0 entered promiscuous mode [ 8.679977] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 8.695636] l4tbr0: port 2(usb0) entered blocking state [ 8.695642] l4tbr0: port 2(usb0) entered disabled state [ 8.695799] device usb0 entered promiscuous mode [ 8.733909] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 9.834579] Bridge firewalling registered [ 9.860556] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 10.034814] zram: Added device: zram0 [ 10.037312] zram: Added device: zram1 [ 10.040384] zram: Added device: zram2 [ 10.042441] zram: Added device: zram3 [ 10.044243] zram: Added device: zram4 [ 10.046569] zram: Added device: zram5 [ 10.084699] zram0: detected capacity change from 0 to 334966784 [ 10.117417] Adding 327112k swap on /dev/zram0. Priority:5 extents:1 across:327112k SS [ 10.123082] zram1: detected capacity change from 0 to 334966784 [ 10.162082] Adding 327112k swap on /dev/zram1. Priority:5 extents:1 across:327112k SS [ 10.165436] zram2: detected capacity change from 0 to 334966784 [ 10.197015] Adding 327112k swap on /dev/zram2. Priority:5 extents:1 across:327112k SS [ 10.200564] zram3: detected capacity change from 0 to 334966784 [ 10.224572] Adding 327112k swap on /dev/zram3. Priority:5 extents:1 across:327112k SS [ 10.233211] zram4: detected capacity change from 0 to 334966784 [ 10.254199] Adding 327112k swap on /dev/zram4. Priority:5 extents:1 across:327112k SS [ 10.265524] zram5: detected capacity change from 0 to 334966784 [ 10.284272] Adding 327112k swap on /dev/zram5. Priority:5 extents:1 across:327112k SS [ 10.581455] Netfilter messages via NETLINK v0.30. [ 10.587254] ctnetlink v0.93: registering with nfnetlink. [ 10.932569] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 34.234136] vdd-3v3-disp-cvb: disabling [ 34.234151] vdd-3v3-cvb: disabling [ 34.234162] vdd-1v8-cvb: disabling [ 34.234171] vdd-fan: disabling [ 34.234182] vdd_sys_en: disabling [ 34.234207] spmic-ldo1: disabling [ 34.234430] vddio-sdmmc1: disabling [ 34.234597] vdd-sys-bl: disabling