[0000.200] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-1b8ce67c) [0000.208] I> bit @ 0xd480000 [0000.211] I> Boot-device: eMMC [0000.215] I> sdmmc bdev is already initialized [0000.220] I> pmic: reset reason (nverc) : 0x80 [0000.226] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0000.234] I> Found 31 partitions in SDMMC_USER (instance 3) [0000.240] I> A/B: bin_type (16) slot 0 [0000.244] I> Loading partition bpmp-fw at 0xd7800000 [0000.248] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.254] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.269] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.275] I> A/B: bin_type (17) slot 0 [0000.278] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.283] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.289] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.303] I> Binary(17) of size 465840 is loaded @ 0xd798e200 [0000.482] I> Loading SCE-FW ... [0000.485] I> A/B: bin_type (12) slot 0 [0000.488] I> Loading partition sce-fw at 0xd7300000 [0000.493] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.499] I> Addr: 0xd7300000, start-block: 58782024, num_blocks: 1 [0000.508] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.514] I> Init SCE [0000.516] I> Loading APE-FW ... [0000.519] I> A/B: bin_type (11) slot 0 [0000.523] I> Loading partition adsp-fw at 0xd7400000 [0000.528] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.533] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.542] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.548] I> Copy BTCM section [0000.551] I> A/B: bin_type (13) slot 0 [0000.555] I> Loading partition cpu-bootloader at 0x96000000 [0000.560] I> Reading two headers - addr:0x96000000 blocks:1 [0000.566] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.577] I> Binary(13) of size 277776 is loaded @ 0x96000000 [0000.583] I> A/B: bin_type (20) slot 0 [0000.586] I> Loading partition bootloader-dtb at 0x8520f400 [0000.592] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.597] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.610] I> Binary(20) of size 342688 is loaded @ 0x8520f400 [0000.615] I> A/B: bin_type (14) slot 0 [0000.619] I> Loading partition secure-os at 0x8530f600 [0000.624] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.629] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.641] I> Binary(14) of size 312752 is loaded @ 0x8530f600 [0000.649] I> TOS boot-params @ 0x85000000 [0000.653] I> TOS params prepared [0000.656] I> Loading EKS ... [0000.659] I> A/B: bin_type (15) slot 0 [0000.662] I> Loading partition eks at 0x8590f800 [0000.667] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.672] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0000.680] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.685] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.690] I> Copied encrypted keys [0000.694] I> boot profiler @ 0x275844000 [0000.698] I> boot profiler for TOS @ 0x275844000 [0000.703] I> Unhalting SCE [0000.705] I> Primary Memory Start:80000000 Size:70000000 [0000.711] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.717] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):a28d87f09 NOTICE: BL31: Built : 21:15:42, Aug 12 2019 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! keystore-demo: 141: Hello world from keystore-demo app keystore-demo: 207: main: EKB contents match expected value exit called, thread 0xffffffffea87ad58, name trusty_app_2_7d18fc60-e9fc-11e8 platform_bootstrap_epilog: trusty bootstrap complete [0001.079] I> Welcome to Cboot [0001.082] I> Cboot Version: t186-dcb303f9 [0001.085] I> CPU-BL Params @ 0x275800000 [0001.089] I> 0) Base:0x00000000 Size:0x00000000 [0001.094] I> 1) Base:0x277f00000 Size:0x00100000 [0001.098] I> 2) Base:0x277e00000 Size:0x00100000 [0001.103] I> 3) Base:0x277d00000 Size:0x00100000 [0001.107] I> 4) Base:0x277c00000 Size:0x00100000 [0001.112] I> 5) Base:0x277b00000 Size:0x00100000 [0001.116] I> 6) Base:0x277800000 Size:0x00200000 [0001.121] I> 7) Base:0x277400000 Size:0x00400000 [0001.125] I> 8) Base:0x277a00000 Size:0x00100000 [0001.130] I> 9) Base:0x277300000 Size:0x00100000 [0001.134] I> 10) Base:0x276800000 Size:0x00800000 [0001.139] I> 11) Base:0x30000000 Size:0x00040000 [0001.143] I> 12) Base:0xf0000000 Size:0x00100000 [0001.148] I> 13) Base:0x30040000 Size:0x00001000 [0001.152] I> 14) Base:0x30048000 Size:0x00001000 [0001.156] I> 15) Base:0x30049000 Size:0x00001000 [0001.161] I> 16) Base:0x3004a000 Size:0x00001000 [0001.165] I> 17) Base:0x3004b000 Size:0x00001000 [0001.170] I> 18) Base:0x3004c000 Size:0x00001000 [0001.174] I> 19) Base:0x3004d000 Size:0x00001000 [0001.179] I> 20) Base:0x3004e000 Size:0x00001000 [0001.183] I> 21) Base:0x3004f000 Size:0x00001000 [0001.187] I> 22) Base:0x00000000 Size:0x00000000 [0001.192] I> 23) Base:0xf0100000 Size:0x00010000 [0001.196] I> 24) Base:0x00000000 Size:0x00000000 [0001.201] I> 25) Base:0x00000000 Size:0x00000000 [0001.205] I> 26) Base:0x00000000 Size:0x00000000 [0001.210] I> 27) Base:0x00000000 Size:0x00000000 [0001.214] I> 28) Base:0x84400000 Size:0x00400000 [0001.218] I> 29) Base:0x30000000 Size:0x00010000 [0001.223] I> 30) Base:0x278000000 Size:0x08000000 [0001.227] I> 31) Base:0x00000000 Size:0x00000000 [0001.232] I> 32) Base:0x276000000 Size:0x00600000 [0001.236] I> 33) Base:0x80000000 Size:0x70000000 [0001.241] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.245] I> 35) Base:0x00000000 Size:0x00000000 [0001.250] I> 36) Base:0x00000000 Size:0x00000000 [0001.254] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.259] I> 38) Base:0x84000000 Size:0x00400000 [0001.263] I> 39) Base:0x96000000 Size:0x02000000 [0001.268] I> 40) Base:0x85000000 Size:0x01200000 [0001.272] I> 41) Base:0x275800000 Size:0x00500000 [0001.276] I> 42) Base:0x00000000 Size:0x00000000 [0001.281] I> 43) Base:0x00000000 Size:0x00000000 [0001.285] GIC-SPI Target CPU: 4 [0001.289] Interrupts Init done [0001.292] calling constructors [0001.295] initializing heap [0001.298] initializing threads [0001.301] initializing timers [0001.304] creating bootstrap completion thread [0001.309] top of bootstrap2() [0001.312] CPU: ARM Cortex A57 [0001.315] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.320] initializing platform [0001.323] I> Boot-device: eMMC [0001.327] I> sdmmc bdev is already initialized [0001.333] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0001.339] I> Found 31 partitions in SDMMC_USER (instance 3) [0001.345] W> opt-in fuse is not set, skip fuse_burning [0001.350] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.356] W> No valid slot number is found in scratch register [0001.361] W> Return default slot: _a [0001.365] I> A/B: bin_type (21) slot 0 [0001.368] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.381] I> Kernel_dtb @0x80000000 [0001.385] I> Bl_dtb @0x8520f400 [0001.388] I> gpio framework initialized [0001.394] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.404] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.411] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.421] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.434] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.442] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.448] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.458] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.470] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.478] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.487] I> fixed regulator driver initialized [0001.518] I> register 'maxim' power off handle [0001.523] I> virtual i2c enabled [0001.527] I> registered 'maxim,max77620' pmic [0001.531] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.543] I> Find /i2c@c250000's alias i2c7 [0001.547] I> Reading eeprom i2c=7 address=0x50 [0001.577] I> Device at /i2c@c250000:0x50 [0001.581] I> Reading eeprom i2c=7 address=0x57 [0001.585] E> I2C: slave not found in slaves. [0001.589] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.597] E> I2C_DEV: Failed to send register address 0x00000000. [0001.603] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.612] E> eeprom: Failed to read I2C slave device [0001.617] I> Eeprom read failed 0x3526070d [0001.622] I> Find /i2c@c240000's alias i2c1 [0001.626] I> Reading eeprom i2c=1 address=0x51 [0001.631] E> I2C: slave not found in slaves. [0001.635] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.643] E> I2C_DEV: Failed to send register address 0x00000000. [0001.648] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.658] E> eeprom: Retry to read I2C slave device. [0001.663] E> I2C: slave not found in slaves. [0001.667] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.675] E> I2C_DEV: Failed to send register address 0x00000000. [0001.681] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.690] E> eeprom: Failed to read I2C slave device [0001.695] I> Eeprom read failed 0x3526070d [0001.699] I> Find /i2c@3160000's alias i2c0 [0001.703] I> Reading eeprom i2c=0 address=0x50 [0001.709] E> I2C: slave not found in slaves. [0001.713] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.720] E> I2C_DEV: Failed to send register address 0x00000000. [0001.726] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.736] E> eeprom: Failed to read I2C slave device [0001.740] I> Eeprom read failed 0x3526070d [0001.745] I> Find /i2c@3180000's alias i2c2 [0001.749] I> Reading eeprom i2c=2 address=0x54 [0001.754] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.758] C> GPIO driver for chip_id 0x2 could not be found [0001.764] E> cam_eeprom_read: Can't get gpio driver [0001.768] I> Eeprom read failed 0x4d4d000d [0001.772] I> Reading eeprom i2c=2 address=0x57 [0001.777] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.781] C> GPIO driver for chip_id 0x2 could not be found [0001.787] E> cam_eeprom_read: Can't get gpio driver [0001.791] I> Eeprom read failed 0x4d4d000d [0001.795] I> create_pm_ids: id: 3310-1000-D01-B, len: 15 [0001.800] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.837] E> tegrabl_display_init_regulator: hdmi cable is not connected [0001.843] E> tegrabl_display_get_pdata, failed to parse dtb settings [0001.852] E> cannot find any other nvdisp nodes [0001.856] E> no valid display unit config found in dtb [0001.862] W> display init failed [0001.865] initializing target [0001.868] calling apps_init() [0001.871] starting app kernel_boot_app [0001.877] I> found decompressor handler: lz4-legacy [0001.882] I> decompressing BMP blob ... [0001.892] I> Kernel type = Normal [0001.895] I> Loading kernel from partition ... [0001.899] W> No valid slot number is found in scratch register [0001.905] W> Return default slot: _a [0001.908] I> A/B: bin_type (24) slot 0 [0001.913] I> Boot image size read from image header: f2d10 [0001.918] I> Boot image load address: 0x0x80400000 [0001.923] I> Loading partition kernel at 0x80400000 from device(0x1) [0002.685] I> Kernel hdr @0x80400000 [0002.688] I> Kernel dtb @0x80000000 [0002.691] I> T18x: Authenticate boot.img (bin_type 24), max size 0x4000000 [0002.699] I> T18x: Authenticate tegra194-p2888-0001-p2822-0000.dtb (bin_type 21), max size 0x100000 [0002.709] I> Checking boot.img header magic ... [0002.713] I> [OK] [0002.715] I> Valid boot.img @ 0x80400000 [0002.718] I> decompressor handler not found [0002.722] I> Copying kernel image (477378 bytes) from 0x80400800 to 0x80800000 ... [0002.730] I> Done [0002.732] I> Move ramdisk (len: 0) from 0x80475800 to 0x94830000 [0002.739] I> Updated bpmp info to DTB [0002.745] I> Ramdisk: Base: 0x94830000; Size: 0x0 [0002.749] I> Updated initrd info to DTB [0002.753] W> WARN: Fail to override "console=none" in commandline [0002.759] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.766] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.773] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.780] I> disabled_core_mask: 0xffffff0c [0002.784] W> No valid slot number is found in scratch register [0002.790] W> Return default slot: _a [0002.793] I> Active slot suffix: [0002.796] I> add_boot_slot_suffix: slot_suffix = [0002.801] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0002.837] I> Updated bootarg info to DTB [0002.841] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:c6:2d:20 [0002.847] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:c6:2d:21 [0002.854] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:c6:2d:22 [0002.862] E> Found no plugin manager ids in source DT [0002.867] W> Add plugin manager ids from board info [0002.871] E> "plugin-manager" doesn't exist, creating [0002.876] E> "ids" doesn't exist, creating [0002.880] E> "connection" doesn't exist, creating [0002.885] E> "configs" doesn't exist, creating [0002.889] I> create_pm_ids: id: 3310-1000-D01-B, len: 15 [0002.894] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.905] I> Adding plugin-manager/ids/3310-1000-D01=/i2c@c250000:module@0x50 [0002.912] E> "i2c@c250000" doesn't exist, creating [0002.917] E> "module@0x50" doesn't exist, creating [0002.924] I> Adding plugin-manager/ids/3310-1000-D01-B [0002.931] I> Adding plugin-manager/configs/3310-mem-type 00 [0002.936] I> Adding plugin-manager/configs/3310-power-config 00 [0002.942] I> Adding plugin-manager/configs/3310-misc-config 00 [0002.948] I> Adding plugin-manager/configs/3310-modem-config 00 [0002.954] I> Adding plugin-manager/configs/3310-touch-config 00 [0002.960] I> Adding plugin-manager/configs/3310-display-config 00 [0002.966] I> Adding plugin-manager/cvm [0002.970] E> "chip-id" doesn't exist, creating [0002.974] I> Adding plugin-manager/chip-id/A02P [0002.979] E> "odm-data" doesn't exist, creating [0002.984] I> Adding /chosen/plugin-manager/odm-data [0002.993] I> added [base:0x80000000, size:0x70000000] to /memory [0002.999] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.005] I> added [base:0x275e00000, size:0x200000] to /memory [0003.010] I> added [base:0x276600000, size:0x200000] to /memory [0003.016] I> added [base:0x277000000, size:0x200000] to /memory [0003.022] I> Updated memory info to DTB [0003.026] E> add_disp_param: failed to get display params for du=0 [0003.034] E> "reset" doesn't exist, creating [0003.038] E> "pmc-reset-reason" doesn't exist, creating [0003.044] E> "pmic-reset-reason" doesn't exist, creating [0003.050] I> Adding ecid(000000016450b8881c0000000afb0340) to DT [0003.056] I> disabled_core_mask: 0xffffff0c [0003.068] I> Add serial number:0424118099568 as DT property [0003.077] I> Plugin-manager override starting [0003.083] I> node /plugin-manager/fragement@0 matches [0003.092] I> node /plugin-manager/fragement@4 matches [0003.104] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.123] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.132] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.141] I> node /plugin-manager/fragment-devslp@0 matches [0003.153] I> node /plugin-manager/fragment-500-pcie-config matches [0003.167] I> node /plugin-manager/fragment-500-xusb-config matches [0003.185] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.198] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.208] I> node /plugin-manager/fragment-p3310-c01 matches [0003.220] I> node /plugin-manager/fragment-p3310-c03 matches [0003.255] I> node /plugin-manager/fragment-p3310-c00-camera matches [0003.281] I> Disable plugin-manager status in FDT [0003.285] I> Plugin-manager override finished successfully [0003.290] I> tegrabl_load_kernel_and_dtb: Done [0003.295] E> tegrabl_display_clear: display is not initialized [0003.300] W> Boot logo display failed... [0003.304] I> Kernel EP: 0x80800000, DTB: 0x80000000 U-Boot 2016.07-gd917e08cec (Aug 12 2019 - 21:16:16 -0700) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 2  1  0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 733 bytes read in 124 ms (4.9 KiB/s) L4T boot options 1: primary kernel Enter choice: 1: primary kernel Retrieving file: /boot/initrd 5565090 bytes read in 217 ms (24.5 MiB/s) Retrieving file: /boot/Image 34179080 bytes read in 857 ms (38 MiB/s) append: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000080000000, end 0000000080058dac Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-770) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Aug 12 21:29:52 PDT 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 1.021858] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 1.179538] OF: /usb_cd: could not get #phy-cells for /xusb_padctl@3520000/pads/usb2/lanes/usb2-0 [ 1.188526] tegra-usb-cd usb_cd: failed to get otg port phy -19 [ 1.313091] FAN: coudln't get the regulator [ 1.575314] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 1.590385] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 1.597672] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 3.815925] cgroup: cgroup2: unknown option "nsdelegate" [ 4.324920] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 4.453357] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 5.337983] random: crng init done [ 5.341642] random: 7 urandom warning(s) missed due to ratelimiting [ 5.817244] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 5.845251] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 5.863338] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 6.192505] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 6.237515] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 6.774484] CPU1: shutdown [ 6.851274] CPU2: shutdown [ 7.217695] vdd-1v8: voltage operation not allowed [ 7.217706] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.238197] vdd-1v8: voltage operation not allowed [ 7.238207] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.259037] vdd-1v8: voltage operation not allowed [ 7.259047] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.261453] vdd-1v8: voltage operation not allowed [ 7.261462] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.367725] vdd-1v8: voltage operation not allowed [ 7.367739] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.368669] vdd-1v8: voltage operation not allowed [ 7.368680] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.370315] vdd-1v8: voltage operation not allowed [ 7.370325] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) Ubuntu 18.04.2 LTS tegra-ubuntu ttyS0 tegra-ubuntu login: