ooting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3357) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Jun 25 21:22:12 PDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 780000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a069c000 [ 0.000000] Found lut_mem: 00002008@a0697000 ����Shutdown state requested 1 Rebooting system ... �� [0000.055] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.063] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.069] I> Boot-mode: Coldboot [0000.071] I> Chip revision : A02P [0000.075] I> Bootrom patch version : 15 (correctly patched) [0000.080] I> ATE fuse revision : 0x200 [0000.083] I> Ram repair fuse : 0x0 [0000.086] I> Ram Code : 0x2 [0000.089] I> rst_source : 0xb [0000.091] I> rst_level : 0x1 [0000.095] I> Boot-device: eMMC [0000.110] I> sdmmc DDR50 mode [0000.114] W> No valid slot number is found in scratch register [0000.120] W> Return default slot: _a [0000.123] I> Active Boot chain : 0 [0000.126] I> Boot-device: eMMC [0000.130] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.136] I> Temperature = 31000 [0000.139] W> Skipping boost for clk: BPMP_CPU_NIC [0000.143] W> Skipping boost for clk: BPMP_APB [0000.147] W> Skipping boost for clk: AXI_CBB [0000.151] W> Skipping boost for clk: AON_CPU_NIC [0000.156] W> Skipping boost for clk: CAN1 [0000.159] W> Skipping boost for clk: CAN2 [0000.164] I> Boot-device: eMMC [0000.166] I> Boot-device: eMMC [0000.176] I> Sdmmc: HS400 mode enabled [0000.180] I> ECC region[0]: Start:0x0, End:0x0 [0000.184] I> ECC region[1]: Start:0x0, End:0x0 [0000.189] I> ECC region[2]: Start:0x0, End:0x0 [0000.193] I> ECC region[3]: Start:0x0, End:0x0 [0000.197] I> ECC region[4]: Start:0x0, End:0x0 [0000.201] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.207] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.211] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.216] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.220] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.225] E> FAILED: Thermal config [0000.233] E> FAILED: MEMIO rail config [0000.252] I> Boot-device: eMMC [0000.261] I> sdmmc bdev is already initialized [0000.334] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.342] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-2dfe4beb) [0000.343] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.344] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.344] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.350] W> device prod register failed [0000.354] I> Boot-device: eMMC [0000.357] I> Boot_device: SDMMC_BOOT instance: 3 [0000.363] I> sdmmc-3 params source = boot args [0000.366] I> sdmmc bdev is already initialized [0000.370] I> sdmmc-3 params source = boot args [0000.376] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.383] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.386] W> No valid slot number is found in scratch register [0000.391] W> Return default slot: _a [0000.394] I> Active Boot chain : 0 [0000.398] I> parsing oem signed section of bpmp-fw header done [0000.403] I> bpmp-fw binary init read from storage [0000.408] I> oem authentication of bpmp-fw header done [0000.416] I> bpmp-fw binary done read from storage [0000.417] I> bpmp-fw: Authentication init Done [0000.422] I> parsing oem signed section of cpubl header done [0000.427] I> cpubl binary init read from storage [0000.432] I> bpmp-fw: Authentication Finalize Done [0000.436] I> oem authentication of cpubl header done [0000.441] I> cpubl binary done read from storage [0000.446] I> cpubl: Authentication init Done [0000.451] I> parsing oem signed section of rce header done [0000.455] I> rce binary init read from storage [0000.460] I> Relocating BR-BCT [0000.462] I> cpubl: Authentication Finalize Done [0000.467] I> oem authentication of rce header done [0000.471] I> rce binary done read from storage [0000.476] I> rce: Authentication init Done [0000.480] I> parsing oem signed section of ape header done [0000.485] I> ape binary init read from storage [0000.489] I> rce: Authentication Finalize Done [0000.494] I> oem authentication of ape header done [0000.498] I> ape binary done read from storage [0000.502] I> ape: Authentication init Done [0000.507] I> parsing oem signed section of tos header done [0000.512] I> tos binary init read from storage [0000.516] I> ape: Authentication Finalize Done [0000.521] I> oem authentication of tos header done [0000.525] I> tos binary done read from storage [0000.529] I> tos: Authentication init Done [0000.534] I> parsing oem signed section of bpmp-fw-dtb header done [0000.539] I> bpmp-fw-dtb binary init read from storage [0000.544] I> tos: Authentication Finalize Done [0000.550] I> oem authentication of bpmp-fw-dtb header done [0000.557] I> bpmp-fw-dtb binary done read from storage [0000.559] I> bpmp-fw-dtb: Authentication init Done [0000.564] I> parsing oem signed section of cpubl-dtb header done [0000.569] I> cpubl-dtb binary init read from storage [0000.574] I> bpmp-fw-dtb: Authentication Finalize Done [0000.611] I> oem authentication of cpubl-dtb header done [0000.612] I> cpubl-dtb binary done read from storage [0000.613] I> cpubl-dtb: Authentication init Done [0000.614] I> parsing oem signed section of eks header done [0000.615] I> eks binary init read from storage [0000.616] I> cpubl-dtb: Authentication Finalize Done [0000.616] I> oem authentication of eks header done [0000.620] I> eks binary done read from storage [0000.624] I> eks: Authentication init Done [0000.628] I> eks: Authentication Finalize Done [0000.632] I> EKB detected (length: 0x410) @ VA:0x5270a400 ��NOTICE: BL31: v1.3(release):41d46a9cf NOTICE: BL31: Built : 21:14:52, Jun 25 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized �� [0001.137] I> Welcome to Cboot ��fmon_post initialized ��[0001.137] I> Cboot Version: t194-18fdfe28 [0001.137] I> CPU-BL Params @ 0xf2820000 [0001.138] I> 0) Base:0x00000000 Size:0x00000000 [0001.141] I> 1) Base:0xf1100000 Size:0x00100000 [0001.146] I> 2) Base:0xf2000000 Size:0x00200000 [0001.150] I> 3) Base:0xf1200000 Size:0x00200000 [0001.155] I> 4) Base:0xf1000000 Size:0x00100000 ��clk_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ��[0001.159] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.264] I> 6) Base:0xf3800000 Size:0x00400000 [0001.269] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.273] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.277] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.282] I> 10) Base:0xf3000000 Size:0x00800000 [0001.286] I> 11) Base:0x40000000 Size:0x00040000 [0001.291] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.295] I> 13) Base:0x40046000 Size:0x00002000 ��emc_debugfs initialized dvs_debugfs initialized ��[0001.300] I> 14) Base:0x40048000 Size:0x00002000 ��fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ��[0001.309] I> 15) Base:0xac000000 Size:0x00004000 [0001.359] I> 16) Base:0x4004a000 Size:0x00002000 [0001.364] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.368] I> 18) Base:0x4004c000 Size:0x00002000 [0001.373] I> 19) Base:0xf2200000 Size:0x00600000 [0001.377] I> 20) Base:0x4004e000 Size:0x00002000 [0001.382] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.386] I> 22) Base:0x00000000 Size:0x00000000 [0001.391] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.395] I> 24) Base:0xf6000000 Size:0x02000000 [0001.400] I> 25) Base:0x40050000 Size:0x00002000 [0001.404] I> 26) Base:0x40040000 Size:0x00006000 [0001.409] I> 27) Base:0xf1800000 Size:0x00400000 [0001.413] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.417] I> 29) Base:0xf1400000 Size:0x00400000 [0001.422] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.426] I> 31) Base:0x00000000 Size:0x00000000 [0001.431] I> 32) Base:0xf8000000 Size:0x08000000 [0001.435] I> 33) Base:0x00000000 Size:0x00000000 [0001.440] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.444] I> 35) Base:0xab000000 Size:0x01000000 [0001.449] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.453] I> 37) Base:0xf2800000 Size:0x00800000 [0001.458] I> 38) Base:0x80000000 Size:0x20000000 [0001.462] I> 39) Base:0xb0000000 Size:0x08000000 [0001.467] I> 40) Base:0x00000000 Size:0x00000000 [0001.471] I> 41) Base:0x00000000 Size:0x00000000 [0001.475] I> 42) Base:0x00000000 Size:0x00000000 [0001.480] I> 43) Base:0x00000000 Size:0x00000000 [0001.484] I> 44) Base:0x00000000 Size:0x00000000 [0001.489] I> 45) Base:0x00000000 Size:0x00000000 [0001.493] GIC-SPI Target CPU: 0 [0001.496] Interrupts Init done [0001.499] calling constructors [0001.502] initializing heap [0001.505] I> Heap: [0xa06905a8 ... 0xab000000] [0001.509] initializing threads [0001.512] initializing timers [0001.515] creating bootstrap completion thread [0001.519] top of bootstrap2() [0001.522] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.526] initializing platform [0001.529] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.535] W> device prod register failed [0001.539] I> Bl_dtb @0xaaf00000 [0001.545] W> "plugin-manager" doesn't exist, creating [0001.547] W> "ids" doesn't exist, creating [0001.551] W> "connection" doesn't exist, creating [0001.555] W> "configs" doesn't exist, creating [0001.568] I> Find /i2c@3160000's alias i2c0 [0001.568] I> Reading eeprom i2c=0 address=0x50 [0001.594] I> Device at /i2c@3160000:0x50 [0001.594] I> Reading eeprom i2c=0 address=0x56 [0001.618] I> Device at /i2c@3160000:0x56 [0001.620] I> Find /i2c@3180000's alias i2c2 [0001.620] I> Reading eeprom i2c=2 address=0x54 [0001.622] E> I2C: slave not found in slaves. [0001.622] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.623] E> I2C_DEV: Failed to send register address 0x00000000. [0001.624] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.632] E> eeprom: Failed to read I2C slave device [0001.637] I> Eeprom read failed 0x3526070d [0001.641] I> Reading eeprom i2c=2 address=0x57 [0001.646] E> I2C: slave not found in slaves. [0001.650] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.657] E> I2C_DEV: Failed to send register address 0x00000000. [0001.663] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.673] E> eeprom: Failed to read I2C slave device [0001.677] I> Eeprom read failed 0x3526070d [0001.681] I> Reading eeprom i2c=2 address=0x52 [0001.686] E> I2C: slave not found in slaves. [0001.690] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.698] E> I2C_DEV: Failed to send register address 0x00000000. [0001.703] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.713] E> eeprom: Failed to read I2C slave device [0001.717] I> Eeprom read failed 0x3526070d [0001.723] I> Find /i2c@c240000's alias i2c1 [0001.725] I> Reading eeprom i2c=1 address=0x52 [0001.731] E> I2C: slave not found in slaves. [0001.734] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.742] E> I2C_DEV: Failed to send register address 0x00000000. [0001.747] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.757] E> eeprom: Retry to read I2C slave device. [0001.762] E> I2C: slave not found in slaves. [0001.766] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.774] E> I2C_DEV: Failed to send register address 0x00000000. [0001.779] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.789] E> eeprom: Failed to read I2C slave device [0001.793] I> Eeprom read failed 0x3526070d [0001.797] I> Reading eeprom i2c=1 address=0x50 [0001.802] E> I2C: slave not found in slaves. [0001.806] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.814] E> I2C_DEV: Failed to send register address 0x00000000. [0001.819] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.829] E> eeprom: Retry to read I2C slave device. [0001.834] E> I2C: slave not found in slaves. [0001.838] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.845] E> I2C_DEV: Failed to send register address 0x00000000. [0001.851] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.860] E> eeprom: Failed to read I2C slave device [0001.865] I> Eeprom read failed 0x3526070d [0001.869] I> create_pm_ids: id: 2888-0004-400-K, len: 15 [0001.874] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.885] I> create_pm_ids: id: 2822-0000-700-J, len: 15 [0001.891] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.902] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0001.910] W> "i2c@3160000" doesn't exist, creating [0001.913] W> "module@0x50" doesn't exist, creating [0001.918] I> Adding plugin-manager/ids/2822-0000-700=/i2c@3160000:module@0x56 [0001.925] W> "module@0x56" doesn't exist, creating [0001.932] I> Adding plugin-manager/cvm [0001.933] W> "chip-id" doesn't exist, creating [0001.937] I> Adding plugin-manager/chip-id/A02P [0001.942] I> Plugin-manager override starting [0001.947] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.956] I> node /plugin-manager/fragement-soft-wdt matches [0001.965] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.970] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0001.984] I> Disable plugin-manager status in FDT [0001.984] I> Plugin-manager override finished successfully [0001.984] I> gpio framework initialized [0001.986] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0001.991] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0001.998] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.006] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.013] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.019] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.026] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.033] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.041] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.047] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.055] I> fixed regulator driver initialized [0002.066] I> register 'maxim' power off handle [0002.067] I> virtual i2c enabled [0002.067] I> registered 'maxim,max20024' pmic [0002.069] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.076] I> Boot-device: eMMC [0002.079] I> Boot_device: SDMMC_BOOT instance: 3 [0002.088] I> sdmmc-3 params source = boot args [0002.088] I> create_pm_ids: id: 2888-0004-400-K, len: 15 [0002.093] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.104] I> create_pm_ids: id: 2822-0000-700-J, len: 15 [0002.109] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.120] I> sdmmc bdev is already initialized [0002.124] I> sdmmc-3 params source = boot args [0002.155] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.167] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.178] I> enabling 'vdd-hdmi-5v0' regulator [0002.185] I> regulator 'vdd-hdmi-5v0' already enabled [0002.185] I> hdmi cable connected [0002.187] W> set volts not configured for 'vdd-1v0' [0002.189] W> set volts not configured for 'vdd-1v8-hs' [0002.194] E> invalid display type [0002.198] E> invalid display type [0002.200] E> cannot find any other nvdisp nodes [0002.215] I> edid read success [0002.228] I> edid read success [0002.228] I> width = 640, height = 480, frequency = 25174825 [0002.228] I> width = 640, height = 480, frequency = 25174825 [0002.229] I> width = 2560, height = 1440, frequency = 241500000 [0002.229] I> width = 1920, height = 1080, frequency = 148500000 [0002.230] I> width = 1920, height = 1080, frequency = 148351648 [0002.234] I> width = 1280, height = 720, frequency = 74175824 [0002.239] I> width = 720, height = 480, frequency = 26973026 [0002.245] I> width = 720, height = 480, frequency = 26973026 [0002.251] I> width = 640, height = 480, frequency = 25174825 [0002.256] I> width = 720, height = 576, frequency = 26973026 [0002.262] I> width = 720, height = 576, frequency = 26973026 [0002.267] I> width = 1280, height = 720, frequency = 74175824 [0002.273] I> width = 1920, height = 1080, frequency = 148351648 [0002.278] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.289] I> hdmi_enable, starting HDMI initialisation [0002.294] I> hdmi_enable, HDMI initialisation complete [0002.304] I> Load in CBoot Boot Options partition and parse it [0002.311] E> Error -9 when finding node with path /boot-configuration [0002.311] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.314] I> Hit any key to stop autoboot: 4 3 2 1 [0004.322] initializing target [0004.322] calling apps_init() [0004.323] starting app kernel_boot_app [0004.342] I> found decompressor handler: lz4-legacy [0004.343] I> decompressing BMP blob ... [0004.346] I> Kernel type = Normal [0004.347] I> Loading kernel-bootctrl from partition [0004.347] I> Loading partition kernel-bootctrl at 0xa4ac0000 from device(0x1) [0004.354] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.354] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.355] I> ########## SD boot ########## [0004.359] I> Found sdcard [0004.364] I> enabling 'vdd-sdmmc1-sw' regulator [0004.370] I> regulator 'vdd-sdmmc1-sw' already enabled [0004.398] I> sdmmc SDR mode [0004.412] I> -0 params source = [0004.420] I> Found 11 partitions in SDCARD (instance 0) [0004.421] I> Look for boot partition [0004.421] I> Fallback: assuming 0th partition is boot partition [0004.422] I> Detect filesystem [0004.442] I> Loading extlinux.conf ... [0004.442] I> rootfs path: /sd/boot/extlinux/extlinux.conf [0004.471] I> L4T boot options [0004.471] I> [1]: "primary kernel" [0004.472] I> Enter choice: [0007.473] I> Continuing with default option: 1 [0007.473] I> Loading kernel sig file from rootfs ... [0007.473] I> rootfs path: /sd/boot/Image.sig [0007.486] I> Loading kernel binary from rootfs ... [0007.486] I> rootfs path: /sd/boot/Image [0010.309] I> Validate kernel ... [0010.309] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0010.641] I> No kernel-dtb binary path [0010.641] W> No valid slot number is found in scratch register [0010.642] W> Return default slot: _a [0010.642] I> A/B: bin_type (38) slot 0 [0010.642] I> Loading kernel-dtb from partition [0010.643] I> Loading partition kernel-dtb at 0x91000000 from device(0x6) [0010.684] I> Validate kernel-dtb ... [0010.685] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0010.688] I> Loading ramdisk from rootfs ... [0010.688] I> rootfs path: /sd/boot/initrd [0011.150] I> Kernel hdr @0xa4ac0000 [0011.150] I> Kernel dtb @0x90000000 [0011.151] I> decompressor handler not found [0011.151] I> Copying kernel image (34330640 bytes) from 0xa4ac0000 to 0x80080000 ... [0011.161] I> Done [0011.162] I> Updated bpmp info to DTB [0011.163] I> Ramdisk: Base: 0x92000000; Size: 0x54ecaf [0011.163] I> Updated initrd info to DTB [0011.163] W> WARN: Fail to override "console=none" in commandline [0011.164] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0011.170] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0011.178] W> No valid slot number is found in scratch register [0011.183] W> Return default slot: _a [0011.187] I> Active slot suffix: [0011.190] I> add_boot_slot_suffix: slot_suffix = [0011.194] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt tegra_fbmem=0x800000@0xa069c000 lut_mem=0x2008@0xa0697000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.rat [0011.224] I> Updated bootarg info to DTB [0011.228] W> MAC addr invalid! [0011.231] E> Failed to get WIFI MAC address [0011.235] W> MAC addr invalid! [0011.237] E> Failed to get Bluetooth MAC address [0011.242] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:e5:93:77 [0011.249] W> "plugin-manager" doesn't exist, creating [0011.253] I> Adding /chosen/plugin-manager/cvm [0011.257] W> "chip-id" doesn't exist, creating [0011.261] I> Adding /chosen/plugin-manager/chip-id [0011.266] W> "configs" doesn't exist, creating [0011.270] I> Adding /chosen/plugin-manager/configs [0011.275] W> "ids" doesn't exist, creating [0011.279] I> Adding /chosen/plugin-manager/ids [0011.284] W> "odm-data" doesn't exist, creating [0011.288] I> Adding /chosen/plugin-manager/odm-data [0011.295] W> "memory" doesn't exist, creating [0011.297] I> [0] START: 0x80000000, END: 0xac000000 [0011.301] I> [1] START: 0xac004000, END: 0xf09d0000 [0011.306] I> [2] START: 0xf09dc000, END: 0xf09e0000 [0011.311] I> dram_block larger than 80000000 [0011.315] I> [3] START: 0x100000000, END: 0x880000000 [0011.320] I> added [base:0x80000000, size:0x2c000000] to /memory [0011.326] I> added [base:0xac200000, size:0x44600000] to /memory [0011.331] I> added [base:0x100000000, size:0x780000000] to /memory [0011.338] I> Updated memory info to DTB [0011.341] E> add_disp_param: failed to get display params for du=1 [0011.347] W> "reset" doesn't exist, creating [0011.352] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0011.356] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0011.361] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0011.365] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0011.370] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0011.375] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0011.380] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0011.384] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0011.390] W> "misc-data" doesn't exist, creating [0011.394] I> Boot-device: eMMC [0011.396] I> Add boot-sdmmc to plugin-manager/misc-data [0011.402] I> Add storage-sdmmc to plugin-manager/misc-data [0011.407] W> Unknown storage device [0011.410] I> Add serial number:1421220031343 as DT property [0011.416] I> Plugin-manager override starting [0011.420] I> node /plugin-manager/fragment-pcie-c5-rp matches [0011.427] I> node /plugin-manager/fragement-tegra-wdt-en matches [0011.435] I> Disable plugin-manager status in FDT [0011.436] I> Plugin-manager override finished successfully [0011.441] I> tegrabl_load_kernel_and_dtb: Done [0011.463] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3357) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Jun 25 21:22:12 PDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 780000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a069c000 [ 0.000000] Found lut_mem: 00002008@a0697000 ����Shutdown state requested 1 Rebooting system ... �� [0000.055] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.063] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.069] I> Boot-mode: Coldboot [0000.071] I> Chip revision : A02P [0000.075] I> Bootrom patch version : 15 (correctly patched) [0000.080] I> ATE fuse revision : 0x200 [0000.083] I> Ram repair fuse : 0x0 [0000.086] I> Ram Code : 0x2 [0000.089] I> rst_source : 0xb [0000.091] I> rst_level : 0x1 [0000.095] I> Boot-device: eMMC [0000.110] I> sdmmc DDR50 mode [0000.114] W> No valid slot number is found in scratch register [0000.120] W> Return default slot: _a [0000.123] I> Active Boot chain : 0 [0000.126] I> Boot-device: eMMC [0000.130] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.136] I> Temperature = 31500 [0000.139] W> Skipping boost for clk: BPMP_CPU_NIC [0000.143] W> Skipping boost for clk: BPMP_APB [0000.147] W> Skipping boost for clk: AXI_CBB [0000.151] W> Skipping boost for clk: AON_CPU_NIC [0000.156] W> Skipping boost for clk: CAN1 [0000.159] W> Skipping boost for clk: CAN2 [0000.164] I> Boot-device: eMMC [0000.166] I> Boot-device: eMMC [0000.176] I> Sdmmc: HS400 mode enabled [0000.180] I> ECC region[0]: Start:0x0, End:0x0 [0000.184] I> ECC region[1]: Start:0x0, End:0x0 [0000.189] I> ECC region[2]: Start:0x0, End:0x0 [0000.193] I> ECC region[3]: Start:0x0, End:0x0 [0000.197] I> ECC region[4]: Start:0x0, End:0x0 [0000.201] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.207] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.211] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.216] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.220] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.225] E> FAILED: Thermal config [0000.233] E> FAILED: MEMIO rail config [0000.252] I> Boot-device: eMMC [0000.261] I> sdmmc bdev is already initialized [0000.334] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.343] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-2dfe4beb) [0000.343] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.344] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.345] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.350] W> device prod register failed [0000.354] I> Boot-device: eMMC [0000.357] I> Boot_device: SDMMC_BOOT instance: 3 [0000.363] I> sdmmc-3 params source = boot args [0000.366] I> sdmmc bdev is already initialized [0000.370] I> sdmmc-3 params source = boot args [0000.377] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.384] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.386] W> No valid slot number is found in scratch register [0000.391] W> Return default slot: _a [0000.394] I> Active Boot chain : 0 [0000.398] I> parsing oem signed section of bpmp-fw header done [0000.403] I> bpmp-fw binary init read from storage [0000.408] I> oem authentication of bpmp-fw header done [0000.415] I> bpmp-fw binary done read from storage [0000.418] I> bpmp-fw: Authentication init Done [0000.424] I> parsing oem signed section of cpubl header done [0000.427] I> cpubl binary init read from storage [0000.432] I> bpmp-fw: Authentication Finalize Done [0000.437] I> oem authentication of cpubl header done [0000.441] I> cpubl binary done read from storage [0000.446] I> cpubl: Authentication init Done [0000.450] I> parsing oem signed section of rce header done [0000.455] I> rce binary init read from storage [0000.460] I> Relocating BR-BCT [0000.463] I> cpubl: Authentication Finalize Done [0000.467] I> oem authentication of rce header done [0000.472] I> rce binary done read from storage [0000.476] I> rce: Authentication init Done [0000.481] I> parsing oem signed section of ape header done [0000.485] I> ape binary init read from storage [0000.490] I> rce: Authentication Finalize Done [0000.494] I> oem authentication of ape header done [0000.498] I> ape binary done read from storage [0000.503] I> ape: Authentication init Done [0000.509] I> parsing oem signed section of tos header done [0000.512] I> tos binary init read from storage [0000.516] I> ape: Authentication Finalize Done [0000.521] I> oem authentication of tos header done [0000.525] I> tos binary done read from storage [0000.529] I> tos: Authentication init Done [0000.534] I> parsing oem signed section of bpmp-fw-dtb header done [0000.539] I> bpmp-fw-dtb binary init read from storage [0000.544] I> tos: Authentication Finalize Done [0000.550] I> oem authentication of bpmp-fw-dtb header done [0000.557] I> bpmp-fw-dtb binary done read from storage [0000.559] I> bpmp-fw-dtb: Authentication init Done [0000.565] I> parsing oem signed section of cpubl-dtb header done [0000.570] I> cpubl-dtb binary init read from storage [0000.574] I> bpmp-fw-dtb: Authentication Finalize Done [0000.612] I> oem authentication of cpubl-dtb header done [0000.612] I> cpubl-dtb binary done read from storage [0000.613] I> cpubl-dtb: Authentication init Done [0000.615] I> parsing oem signed section of eks header done [0000.615] I> eks binary init read from storage [0000.616] I> cpubl-dtb: Authentication Finalize Done [0000.617] I> oem authentication of eks header done [0000.620] I> eks binary done read from storage [0000.625] I> eks: Authentication init Done [0000.629] I> eks: Authentication Finalize Done [0000.633] I> EKB detected (length: 0x410) @ VA:0x5270a400 ��NOTICE: BL31: v1.3(release):41d46a9cf NOTICE: BL31: Built : 21:14:52, Jun 25 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized �� [0001.136] I> Welcome to Cboot ��fmon_post initialized ��[0001.136] I> Cboot Version: t194-18fdfe28 [0001.137] I> CPU-BL Params @ 0xf2820000 [0001.137] I> 0) Base:0x00000000 Size:0x00000000 [0001.141] I> 1) Base:0xf1100000 Size:0x00100000 [0001.145] I> 2) Base:0xf2000000 Size:0x00200000 [0001.150] I> 3) Base:0xf1200000 Size:0x00200000 [0001.154] I> 4) Base:0xf1000000 Size:0x00100000 ��clk_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ��[0001.159] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.263] I> 6) Base:0xf3800000 Size:0x00400000 [0001.268] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.272] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.277] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.281] I> 10) Base:0xf3000000 Size:0x00800000 [0001.286] I> 11) Base:0x40000000 Size:0x00040000 [0001.290] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.295] I> 13) Base:0x40046000 Size:0x00002000 [0001.299] I> 14) Base:0x40048000 Size:0x00002000 ��emc_debugfs initialized dvs_debugfs initialized fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ��[0001.304] I> 15) Base:0xac000000 Size:0x00004000 [0001.358] I> 16) Base:0x4004a000 Size:0x00002000 [0001.363] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.367] I> 18) Base:0x4004c000 Size:0x00002000 [0001.372] I> 19) Base:0xf2200000 Size:0x00600000 [0001.376] I> 20) Base:0x4004e000 Size:0x00002000 [0001.381] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.385] I> 22) Base:0x00000000 Size:0x00000000 [0001.390] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.394] I> 24) Base:0xf6000000 Size:0x02000000 [0001.399] I> 25) Base:0x40050000 Size:0x00002000 [0001.403] I> 26) Base:0x40040000 Size:0x00006000 [0001.408] I> 27) Base:0xf1800000 Size:0x00400000 [0001.412] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.416] I> 29) Base:0xf1400000 Size:0x00400000 [0001.421] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.425] I> 31) Base:0x00000000 Size:0x00000000 [0001.430] I> 32) Base:0xf8000000 Size:0x08000000 [0001.434] I> 33) Base:0x00000000 Size:0x00000000 [0001.439] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.443] I> 35) Base:0xab000000 Size:0x01000000 [0001.448] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.452] I> 37) Base:0xf2800000 Size:0x00800000 [0001.457] I> 38) Base:0x80000000 Size:0x20000000 [0001.461] I> 39) Base:0xb0000000 Size:0x08000000 [0001.466] I> 40) Base:0x00000000 Size:0x00000000 [0001.470] I> 41) Base:0x00000000 Size:0x00000000 [0001.474] I> 42) Base:0x00000000 Size:0x00000000 [0001.479] I> 43) Base:0x00000000 Size:0x00000000 [0001.483] I> 44) Base:0x00000000 Size:0x00000000 [0001.488] I> 45) Base:0x00000000 Size:0x00000000 [0001.492] GIC-SPI Target CPU: 0 [0001.495] Interrupts Init done [0001.498] calling constructors [0001.501] initializing heap [0001.504] I> Heap: [0xa06905a8 ... 0xab000000] [0001.508] initializing threads [0001.511] initializing timers [0001.514] creating bootstrap completion thread [0001.518] top of bootstrap2() [0001.521] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.525] initializing platform [0001.528] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.534] W> device prod register failed [0001.538] I> Bl_dtb @0xaaf00000 [0001.544] W> "plugin-manager" doesn't exist, creating [0001.546] W> "ids" doesn't exist, creating [0001.550] W> "connection" doesn't exist, creating [0001.554] W> "configs" doesn't exist, creating [0001.567] I> Find /i2c@3160000's alias i2c0 [0001.568] I> Reading eeprom i2c=0 address=0x50 [0001.593] I> Device at /i2c@3160000:0x50 [0001.594] I> Reading eeprom i2c=0 address=0x56 [0001.618] I> Device at /i2c@3160000:0x56 [0001.620] I> Find /i2c@3180000's alias i2c2 [0001.620] I> Reading eeprom i2c=2 address=0x54 [0001.622] E> I2C: slave not found in slaves. [0001.622] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.623] E> I2C_DEV: Failed to send register address 0x00000000. [0001.624] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.632] E> eeprom: Failed to read I2C slave device [0001.637] I> Eeprom read failed 0x3526070d [0001.641] I> Reading eeprom i2c=2 address=0x57 [0001.645] E> I2C: slave not found in slaves. [0001.649] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.657] E> I2C_DEV: Failed to send register address 0x00000000. [0001.663] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.672] E> eeprom: Failed to read I2C slave device [0001.677] I> Eeprom read failed 0x3526070d [0001.681] I> Reading eeprom i2c=2 address=0x52 [0001.685] E> I2C: slave not found in slaves. [0001.689] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.697] E> I2C_DEV: Failed to send register address 0x00000000. [0001.703] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.712] E> eeprom: Failed to read I2C slave device [0001.717] I> Eeprom read failed 0x3526070d [0001.722] I> Find /i2c@c240000's alias i2c1 [0001.725] I> Reading eeprom i2c=1 address=0x52 [0001.731] E> I2C: slave not found in slaves. [0001.734] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.741] E> I2C_DEV: Failed to send register address 0x00000000. [0001.747] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.756] E> eeprom: Retry to read I2C slave device. [0001.761] E> I2C: slave not found in slaves. [0001.765] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.773] E> I2C_DEV: Failed to send register address 0x00000000. [0001.779] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.788] E> eeprom: Failed to read I2C slave device [0001.793] I> Eeprom read failed 0x3526070d [0001.797] I> Reading eeprom i2c=1 address=0x50 [0001.802] E> I2C: slave not found in slaves. [0001.805] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.813] E> I2C_DEV: Failed to send register address 0x00000000. [0001.819] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.828] E> eeprom: Retry to read I2C slave device. [0001.833] E> I2C: slave not found in slaves. [0001.837] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.845] E> I2C_DEV: Failed to send register address 0x00000000. [0001.851] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.860] E> eeprom: Failed to read I2C slave device [0001.865] I> Eeprom read failed 0x3526070d [0001.869] I> create_pm_ids: id: 2888-0004-400-K, len: 15 [0001.874] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.885] I> create_pm_ids: id: 2822-0000-700-J, len: 15 [0001.890] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.901] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0001.909] W> "i2c@3160000" doesn't exist, creating [0001.913] W> "module@0x50" doesn't exist, creating [0001.918] I> Adding plugin-manager/ids/2822-0000-700=/i2c@3160000:module@0x56 [0001.925] W> "module@0x56" doesn't exist, creating [0001.932] I> Adding plugin-manager/cvm [0001.933] W> "chip-id" doesn't exist, creating [0001.937] I> Adding plugin-manager/chip-id/A02P [0001.942] I> Plugin-manager override starting [0001.947] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.956] I> node /plugin-manager/fragement-soft-wdt matches [0001.964] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.969] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0001.984] I> Disable plugin-manager status in FDT [0001.984] I> Plugin-manager override finished successfully [0001.985] I> gpio framework initialized [0001.987] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0001.991] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0001.997] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.006] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.013] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.019] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.025] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.033] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.041] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.047] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.055] I> fixed regulator driver initialized [0002.069] I> register 'maxim' power off handle [0002.070] I> virtual i2c enabled [0002.070] I> registered 'maxim,max20024' pmic [0002.070] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.076] I> Boot-device: eMMC [0002.079] I> Boot_device: SDMMC_BOOT instance: 3 [0002.087] I> sdmmc-3 params source = boot args [0002.088] I> create_pm_ids: id: 2888-0004-400-K, len: 15 [0002.093] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.104] I> create_pm_ids: id: 2822-0000-700-J, len: 15 [0002.109] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.120] I> sdmmc bdev is already initialized [0002.124] I> sdmmc-3 params source = boot args [0002.155] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.167] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.177] I> enabling 'vdd-hdmi-5v0' regulator [0002.182] I> regulator 'vdd-hdmi-5v0' already enabled [0002.183] I> hdmi cable connected [0002.185] W> set volts not configured for 'vdd-1v0' [0002.187] W> set volts not configured for 'vdd-1v8-hs' [0002.191] E> invalid display type [0002.195] E> invalid display type [0002.196] E> cannot find any other nvdisp nodes [0002.211] I> edid read success [0002.223] I> edid read success [0002.224] I> width = 640, height = 480, frequency = 25174825 [0002.224] I> width = 640, height = 480, frequency = 25174825 [0002.225] I> width = 2560, height = 1440, frequency = 241500000 [0002.225] I> width = 1920, height = 1080, frequency = 148500000 [0002.225] I> width = 1920, height = 1080, frequency = 148351648 [0002.230] I> width = 1280, height = 720, frequency = 74175824 [0002.235] I> width = 720, height = 480, frequency = 26973026 [0002.241] I> width = 720, height = 480, frequency = 26973026 [0002.246] I> width = 640, height = 480, frequency = 25174825 [0002.252] I> width = 720, height = 576, frequency = 26973026 [0002.257] I> width = 720, height = 576, frequency = 26973026 [0002.263] I> width = 1280, height = 720, frequency = 74175824 [0002.268] I> width = 1920, height = 1080, frequency = 148351648 [0002.274] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.284] I> hdmi_enable, starting HDMI initialisation [0002.289] I> hdmi_enable, HDMI initialisation complete [0002.299] I> Load in CBoot Boot Options partition and parse it [0002.306] E> Error -9 when finding node with path /boot-configuration [0002.306] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.310] I> Hit any key to stop autoboot: 4 3 2 1 [0004.317] initializing target [0004.317] calling apps_init() [0004.318] starting app kernel_boot_app [0004.337] I> found decompressor handler: lz4-legacy [0004.338] I> decompressing BMP blob ... [0004.341] I> Kernel type = Normal [0004.342] I> Loading kernel-bootctrl from partition [0004.342] I> Loading partition kernel-bootctrl at 0xa4ac0000 from device(0x1) [0004.349] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.349] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.350] I> ########## SD boot ########## [0004.354] I> Found sdcard [0004.358] I> enabling 'vdd-sdmmc1-sw' regulator [0004.364] I> regulator 'vdd-sdmmc1-sw' already enabled [0004.392] I> sdmmc SDR mode [0004.406] I> -0 params source = [0004.415] I> Found 11 partitions in SDCARD (instance 0) [0004.415] I> Look for boot partition [0004.416] I> Fallback: assuming 0th partition is boot partition [0004.416] I> Detect filesystem [0004.436] I> Loading extlinux.conf ... [0004.437] I> rootfs path: /sd/boot/extlinux/extlinux.conf [0004.465] I> L4T boot options [0004.466] I> [1]: "primary kernel" [0004.466] I> Enter choice: [0007.467] I> Continuing with default option: 1 [0007.467] I> Loading kernel sig file from rootfs ... [0007.467] I> rootfs path: /sd/boot/Image.sig [0007.480] I> Loading kernel binary from rootfs ... [0007.480] I> rootfs path: /sd/boot/Image [0010.302] I> Validate kernel ... [0010.302] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0010.631] I> No kernel-dtb binary path [0010.631] W> No valid slot number is found in scratch register [0010.632] W> Return default slot: _a [0010.632] I> A/B: bin_type (38) slot 0 [0010.632] I> Loading kernel-dtb from partition [0010.633] I> Loading partition kernel-dtb at 0x91000000 from device(0x6) [0010.674] I> Validate kernel-dtb ... [0010.675] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0010.678] I> Loading ramdisk from rootfs ... [0010.678] I> rootfs path: /sd/boot/initrd [0011.140] I> Kernel hdr @0xa4ac0000 [0011.140] I> Kernel dtb @0x90000000 [0011.140] I> decompressor handler not found [0011.141] I> Copying kernel image (34330640 bytes) from 0xa4ac0000 to 0x80080000 ... [0011.151] I> Done [0011.152] I> Updated bpmp info to DTB [0011.153] I> Ramdisk: Base: 0x92000000; Size: 0x54ecaf [0011.153] I> Updated initrd info to DTB [0011.153] W> WARN: Fail to override "console=none" in commandline [0011.154] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0011.160] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0011.168] W> No valid slot number is found in scratch register [0011.173] W> Return default slot: _a [0011.177] I> Active slot suffix: [0011.180] I> add_boot_slot_suffix: slot_suffix = [0011.184] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt tegra_fbmem=0x800000@0xa069c000 lut_mem=0x2008@0xa0697000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.rat [0011.214] I> Updated bootarg info to DTB [0011.218] W> MAC addr invalid! [0011.221] E> Failed to get WIFI MAC address [0011.225] W> MAC addr invalid! [0011.227] E> Failed to get Bluetooth MAC address [0011.232] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:e5:93:77 [0011.239] W> "plugin-manager" doesn't exist, creating [0011.243] I> Adding /chosen/plugin-manager/cvm [0011.247] W> "chip-id" doesn't exist, creating [0011.251] I> Adding /chosen/plugin-manager/chip-id [0011.256] W> "configs" doesn't exist, creating [0011.260] I> Adding /chosen/plugin-manager/configs [0011.265] W> "ids" doesn't exist, creating [0011.269] I> Adding /chosen/plugin-manager/ids [0011.273] W> "odm-data" doesn't exist, creating [0011.278] I> Adding /chosen/plugin-manager/odm-data [0011.285] W> "memory" doesn't exist, creating [0011.287] I> [0] START: 0x80000000, END: 0xac000000 [0011.291] I> [1] START: 0xac004000, END: 0xf09d0000 [0011.296] I> [2] START: 0xf09dc000, END: 0xf09e0000 [0011.301] I> dram_block larger than 80000000 [0011.305] I> [3] START: 0x100000000, END: 0x880000000 [0011.310] I> added [base:0x80000000, size:0x2c000000] to /memory [0011.316] I> added [base:0xac200000, size:0x44600000] to /memory [0011.321] I> added [base:0x100000000, size:0x780000000] to /memory [0011.328] I> Updated memory info to DTB [0011.331] E> add_disp_param: failed to get display params for du=1 [0011.337] W> "reset" doesn't exist, creating [0011.342] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0011.346] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0011.351] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0011.355] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0011.360] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0011.365] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0011.370] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0011.374] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0011.380] W> "misc-data" doesn't exist, creating [0011.384] I> Boot-device: eMMC [0011.386] I> Add boot-sdmmc to plugin-manager/misc-data [0011.392] I> Add storage-sdmmc to plugin-manager/misc-data [0011.397] W> Unknown storage device [0011.401] I> Add serial number:1421220031343 as DT property [0011.406] I> Plugin-manager override starting [0011.410] I> node /plugin-manager/fragment-pcie-c5-rp matches [0011.417] I> node /plugin-manager/fragement-tegra-wdt-en matches [0011.425] I> Disable plugin-manager status in FDT [0011.426] I> Plugin-manager override finished successfully [0011.431] I> tegrabl_load_kernel_and_dtb: Done [0011.453] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3357) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Jun 25 21:22:12 PDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 780000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a069c000 [ 0.000000] Found lut_mem: 00002008@a0697000 ����Shutdown state requested 1 Rebooting system ... �� [0000.055] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.063] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.069] I> Boot-mode: Coldboot [0000.071] I> Chip revision : A02P [0000.075] I> Bootrom patch version : 15 (correctly patched) [0000.080] I> ATE fuse revision : 0x200 [0000.083] I> Ram repair fuse : 0x0 [0000.086] I> Ram Code : 0x2 [0000.089] I> rst_source : 0xb [0000.091] I> rst_level : 0x1 [0000.095] I> Boot-device: eMMC [0000.110] I> sdmmc DDR50 mode [0000.114] W> No valid slot number is found in scratch register [0000.120] W> Return default slot: _a [0000.123] I> Active Boot chain : 0 [0000.126] I> Boot-device: eMMC [0000.130] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.136] I> Temperature = 31500 [0000.139] W> Skipping boost for clk: BPMP_CPU_NIC [0000.143] W> Skipping boost for clk: BPMP_APB [0000.147] W> Skipping boost for clk: AXI_CBB [0000.151] W> Skipping boost for clk: AON_CPU_NIC [0000.156] W> Skipping boost for clk: CAN1 [0000.159] W> Skipping boost for clk: CAN2 [0000.164] I> Boot-device: eMMC [0000.166] I> Boot-device: eMMC [0000.176] I> Sdmmc: HS400 mode enabled [0000.180] I> ECC region[0]: Start:0x0, End:0x0 [0000.184] I> ECC region[1]: Start:0x0, End:0x0 [0000.189] I> ECC region[2]: Start:0x0, End:0x0 [0000.193] I> ECC region[3]: Start:0x0, End:0x0 [0000.197] I> ECC region[4]: Start:0x0, End:0x0 [0000.201] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.207] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.211] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.216] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.220] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.225] E> FAILED: Thermal config [0000.233] E> FAILED: MEMIO rail config [0000.252] I> Boot-device: eMMC [0000.261] I> sdmmc bdev is already initialized [0000.334] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.343] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-2dfe4beb) [0000.343] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.344] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.345] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.350] W> device prod register failed [0000.354] I> Boot-device: eMMC [0000.357] I> Boot_device: SDMMC_BOOT instance: 3 [0000.363] I> sdmmc-3 params source = boot args [0000.366] I> sdmmc bdev is already initialized [0000.370] I> sdmmc-3 params source = boot args [0000.377] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.384] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.386] W> No valid slot number is found in scratch register [0000.391] W> Return default slot: _a [0000.394] I> Active Boot chain : 0 [0000.398] I> parsing oem signed section of bpmp-fw header done [0000.403] I> bpmp-fw binary init read from storage [0000.409] I> oem authentication of bpmp-fw header done [0000.415] I> bpmp-fw binary done read from storage [0000.418] I> bpmp-fw: Authentication init Done [0000.424] I> parsing oem signed section of cpubl header done [0000.428] I> cpubl binary init read from storage [0000.432] I> bpmp-fw: Authentication Finalize Done [0000.437] I> oem authentication of cpubl header done [0000.441] I> cpubl binary done read from storage [0000.446] I> cpubl: Authentication init Done [0000.452] I> parsing oem signed section of rce header done [0000.455] I> rce binary init read from storage [0000.460] I> Relocating BR-BCT [0000.463] I> cpubl: Authentication Finalize Done [0000.467] I> oem authentication of rce header done [0000.472] I> rce binary done read from storage [0000.476] I> rce: Authentication init Done [0000.481] I> parsing oem signed section of ape header done [0000.485] I> ape binary init read from storage [0000.490] I> rce: Authentication Finalize Done [0000.494] I> oem authentication of ape header done [0000.498] I> ape binary done read from storage [0000.503] I> ape: Authentication init Done [0000.507] I> parsing oem signed section of tos header done [0000.512] I> tos binary init read from storage [0000.516] I> ape: Authentication Finalize Done [0000.521] I> oem authentication of tos header done [0000.525] I> tos binary done read from storage [0000.529] I> tos: Authentication init Done [0000.535] I> parsing oem signed section of bpmp-fw-dtb header done [0000.539] I> bpmp-fw-dtb binary init read from storage [0000.544] I> tos: Authentication Finalize Done [0000.550] I> oem authentication of bpmp-fw-dtb header done [0000.557] I> bpmp-fw-dtb binary done read from storage [0000.559] I> bpmp-fw-dtb: Authentication init Done [0000.564] I> parsing oem signed section of cpubl-dtb header done [0000.570] I> cpubl-dtb binary init read from storage [0000.574] I> bpmp-fw-dtb: Authentication Finalize Done [0000.612] I> oem authentication of cpubl-dtb header done [0000.612] I> cpubl-dtb binary done read from storage [0000.613] I> cpubl-dtb: Authentication init Done [0000.615] I> parsing oem signed section of eks header done [0000.615] I> eks binary init read from storage [0000.616] I> cpubl-dtb: Authentication Finalize Done [0000.617] I> oem authentication of eks header done [0000.620] I> eks binary done read from storage [0000.625] I> eks: Authentication init Done [0000.629] I> eks: Authentication Finalize Done [0000.633] I> EKB detected (length: 0x410) @ VA:0x5270a400 ��NOTICE: BL31: v1.3(release):41d46a9cf NOTICE: BL31: Built : 21:14:52, Jun 25 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized �� [0001.137] I> Welcome to Cboot ��fmon_post initialized ��[0001.137] I> Cboot Version: t194-18fdfe28 [0001.138] I> CPU-BL Params @ 0xf2820000 [0001.138] I> 0) Base:0x00000000 Size:0x00000000 [0001.142] I> 1) Base:0xf1100000 Size:0x00100000 [0001.146] I> 2) Base:0xf2000000 Size:0x00200000 [0001.150] I> 3) Base:0xf1200000 Size:0x00200000 [0001.155] I> 4) Base:0xf1000000 Size:0x00100000 ��clk_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ��[0001.159] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.264] I> 6) Base:0xf3800000 Size:0x00400000 [0001.269] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.273] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.278] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.282] I> 10) Base:0xf3000000 Size:0x00800000 [0001.287] I> 11) Base:0x40000000 Size:0x00040000 [0001.291] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.296] I> 13) Base:0x40046000 Size:0x00002000 ��emc_debugfs initialized dvs_debugfs initialized fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ��[0001.300] I> 14) Base:0x40048000 Size:0x00002000 [0001.355] I> 15) Base:0xac000000 Size:0x00004000 [0001.359] I> 16) Base:0x4004a000 Size:0x00002000 [0001.364] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.368] I> 18) Base:0x4004c000 Size:0x00002000 [0001.373] I> 19) Base:0xf2200000 Size:0x00600000 [0001.377] I> 20) Base:0x4004e000 Size:0x00002000 [0001.382] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.386] I> 22) Base:0x00000000 Size:0x00000000 [0001.391] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.395] I> 24) Base:0xf6000000 Size:0x02000000 [0001.399] I> 25) Base:0x40050000 Size:0x00002000 [0001.404] I> 26) Base:0x40040000 Size:0x00006000 [0001.408] I> 27) Base:0xf1800000 Size:0x00400000 [0001.413] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.417] I> 29) Base:0xf1400000 Size:0x00400000 [0001.422] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.426] I> 31) Base:0x00000000 Size:0x00000000 [0001.431] I> 32) Base:0xf8000000 Size:0x08000000 [0001.435] I> 33) Base:0x00000000 Size:0x00000000 [0001.440] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.444] I> 35) Base:0xab000000 Size:0x01000000 [0001.449] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.453] I> 37) Base:0xf2800000 Size:0x00800000 [0001.457] I> 38) Base:0x80000000 Size:0x20000000 [0001.462] I> 39) Base:0xb0000000 Size:0x08000000 [0001.466] I> 40) Base:0x00000000 Size:0x00000000 [0001.471] I> 41) Base:0x00000000 Size:0x00000000 [0001.475] I> 42) Base:0x00000000 Size:0x00000000 [0001.480] I> 43) Base:0x00000000 Size:0x00000000 [0001.484] I> 44) Base:0x00000000 Size:0x00000000 [0001.489] I> 45) Base:0x00000000 Size:0x00000000 [0001.493] GIC-SPI Target CPU: 0 [0001.496] Interrupts Init done [0001.499] calling constructors [0001.502] initializing heap [0001.505] I> Heap: [0xa06905a8 ... 0xab000000] [0001.509] initializing threads [0001.512] initializing timers [0001.515] creating bootstrap completion thread [0001.519] top of bootstrap2() [0001.522] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.526] initializing platform [0001.529] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.535] W> device prod register failed [0001.538] I> Bl_dtb @0xaaf00000 [0001.545] W> "plugin-manager" doesn't exist, creating [0001.546] W> "ids" doesn't exist, creating [0001.551] W> "connection" doesn't exist, creating [0001.555] W> "configs" doesn't exist, creating [0001.564] I> Find /i2c@3160000's alias i2c0 [0001.565] I> Reading eeprom i2c=0 address=0x50 [0001.593] I> Device at /i2c@3160000:0x50 [0001.593] I> Reading eeprom i2c=0 address=0x56 [0001.617] I> Device at /i2c@3160000:0x56 [0001.619] I> Find /i2c@3180000's alias i2c2 [0001.619] I> Reading eeprom i2c=2 address=0x54 [0001.621] E> I2C: slave not found in slaves. [0001.621] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.622] E> I2C_DEV: Failed to send register address 0x00000000. [0001.623] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.631] E> eeprom: Failed to read I2C slave device [0001.636] I> Eeprom read failed 0x3526070d [0001.640] I> Reading eeprom i2c=2 address=0x57 [0001.645] E> I2C: slave not found in slaves. [0001.649] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.657] E> I2C_DEV: Failed to send register address 0x00000000. [0001.662] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.672] E> eeprom: Failed to read I2C slave device [0001.676] I> Eeprom read failed 0x3526070d [0001.680] I> Reading eeprom i2c=2 address=0x52 [0001.685] E> I2C: slave not found in slaves. [0001.689] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.697] E> I2C_DEV: Failed to send register address 0x00000000. [0001.702] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.712] E> eeprom: Failed to read I2C slave device [0001.716] I> Eeprom read failed 0x3526070d [0001.721] I> Find /i2c@c240000's alias i2c1 [0001.724] I> Reading eeprom i2c=1 address=0x52 [0001.730] E> I2C: slave not found in slaves. [0001.733] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.741] E> I2C_DEV: Failed to send register address 0x00000000. [0001.746] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.756] E> eeprom: Retry to read I2C slave device. [0001.761] E> I2C: slave not found in slaves. [0001.765] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.773] E> I2C_DEV: Failed to send register address 0x00000000. [0001.778] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.788] E> eeprom: Failed to read I2C slave device [0001.792] I> Eeprom read failed 0x3526070d [0001.796] I> Reading eeprom i2c=1 address=0x50 [0001.801] E> I2C: slave not found in slaves. [0001.805] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.813] E> I2C_DEV: Failed to send register address 0x00000000. [0001.818] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.828] E> eeprom: Retry to read I2C slave device. [0001.833] E> I2C: slave not found in slaves. [0001.837] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.844] E> I2C_DEV: Failed to send register address 0x00000000. [0001.850] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.860] E> eeprom: Failed to read I2C slave device [0001.864] I> Eeprom read failed 0x3526070d [0001.868] I> create_pm_ids: id: 2888-0004-400-K, len: 15 [0001.873] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.884] I> create_pm_ids: id: 2822-0000-700-J, len: 15 [0001.890] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.901] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0001.909] W> "i2c@3160000" doesn't exist, creating [0001.912] W> "module@0x50" doesn't exist, creating [0001.917] I> Adding plugin-manager/ids/2822-0000-700=/i2c@3160000:module@0x56 [0001.924] W> "module@0x56" doesn't exist, creating [0001.931] I> Adding plugin-manager/cvm [0001.932] W> "chip-id" doesn't exist, creating [0001.936] I> Adding plugin-manager/chip-id/A02P [0001.941] I> Plugin-manager override starting [0001.946] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.955] I> node /plugin-manager/fragement-soft-wdt matches [0001.965] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.970] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0001.980] I> Disable plugin-manager status in FDT [0001.981] I> Plugin-manager override finished successfully [0001.981] I> gpio framework initialized [0001.983] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0001.990] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0001.997] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.005] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.012] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.018] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.025] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.032] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.040] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.046] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.054] I> fixed regulator driver initialized [0002.066] I> register 'maxim' power off handle [0002.067] I> virtual i2c enabled [0002.068] I> registered 'maxim,max20024' pmic [0002.068] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.075] I> Boot-device: eMMC [0002.078] I> Boot_device: SDMMC_BOOT instance: 3 [0002.087] I> sdmmc-3 params source = boot args [0002.087] I> create_pm_ids: id: 2888-0004-400-K, len: 15 [0002.092] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.103] I> create_pm_ids: id: 2822-0000-700-J, len: 15 [0002.108] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.119] I> sdmmc bdev is already initialized [0002.123] I> sdmmc-3 params source = boot args [0002.154] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.166] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.177] I> enabling 'vdd-hdmi-5v0' regulator [0002.184] I> regulator 'vdd-hdmi-5v0' already enabled [0002.184] I> hdmi cable connected [0002.186] W> set volts not configured for 'vdd-1v0' [0002.189] W> set volts not configured for 'vdd-1v8-hs' [0002.194] E> invalid display type [0002.199] E> invalid display type [0002.200] E> cannot find any other nvdisp nodes [0002.215] I> edid read success [0002.228] I> edid read success [0002.228] I> width = 640, height = 480, frequency = 25174825 [0002.229] I> width = 640, height = 480, frequency = 25174825 [0002.229] I> width = 2560, height = 1440, frequency = 241500000 [0002.229] I> width = 1920, height = 1080, frequency = 148500000 [0002.230] I> width = 1920, height = 1080, frequency = 148351648 [0002.234] I> width = 1280, height = 720, frequency = 74175824 [0002.240] I> width = 720, height = 480, frequency = 26973026 [0002.245] I> width = 720, height = 480, frequency = 26973026 [0002.251] I> width = 640, height = 480, frequency = 25174825 [0002.256] I> width = 720, height = 576, frequency = 26973026 [0002.262] I> width = 720, height = 576, frequency = 26973026 [0002.267] I> width = 1280, height = 720, frequency = 74175824 [0002.273] I> width = 1920, height = 1080, frequency = 148351648 [0002.279] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.289] I> hdmi_enable, starting HDMI initialisation [0002.294] I> hdmi_enable, HDMI initialisation complete [0002.303] I> Load in CBoot Boot Options partition and parse it [0002.310] E> Error -9 when finding node with path /boot-configuration [0002.310] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.314] I> Hit any key to stop autoboot: 4 3 2 1 [0004.322] initializing target [0004.322] calling apps_init() [0004.323] starting app kernel_boot_app [0004.342] I> found decompressor handler: lz4-legacy [0004.343] I> decompressing BMP blob ... [0004.347] I> Kernel type = Normal [0004.347] I> Loading kernel-bootctrl from partition [0004.347] I> Loading partition kernel-bootctrl at 0xa4ac0000 from device(0x1) [0004.354] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.354] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.355] I> ########## SD boot ########## [0004.359] I> Found sdcard [0004.364] I> enabling 'vdd-sdmmc1-sw' regulator [0004.371] I> regulator 'vdd-sdmmc1-sw' already enabled [0004.398] I> sdmmc SDR mode [0004.412] I> -0 params source = [0004.421] I> Found 11 partitions in SDCARD (instance 0) [0004.421] I> Look for boot partition [0004.422] I> Fallback: assuming 0th partition is boot partition [0004.422] I> Detect filesystem [0004.443] I> Loading extlinux.conf ... [0004.443] I> rootfs path: /sd/boot/extlinux/extlinux.conf [0004.472] I> L4T boot options [0004.472] I> [1]: "primary kernel" [0004.472] I> Enter choice: [0007.473] I> Continuing with default option: 1 [0007.473] I> Loading kernel sig file from rootfs ... [0007.473] I> rootfs path: /sd/boot/Image.sig [0007.486] I> Loading kernel binary from rootfs ... [0007.486] I> rootfs path: /sd/boot/Image [0010.308] I> Validate kernel ... [0010.308] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0010.637] I> No kernel-dtb binary path [0010.637] W> No valid slot number is found in scratch register [0010.638] W> Return default slot: _a [0010.638] I> A/B: bin_type (38) slot 0 [0010.638] I> Loading kernel-dtb from partition [0010.639] I> Loading partition kernel-dtb at 0x91000000 from device(0x6) [0010.680] I> Validate kernel-dtb ... [0010.681] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0010.684] I> Loading ramdisk from rootfs ... [0010.684] I> rootfs path: /sd/boot/initrd [0011.146] I> Kernel hdr @0xa4ac0000 [0011.146] I> Kernel dtb @0x90000000 [0011.147] I> decompressor handler not found [0011.147] I> Copying kernel image (34330640 bytes) from 0xa4ac0000 to 0x80080000 ... [0011.157] I> Done [0011.158] I> Updated bpmp info to DTB [0011.159] I> Ramdisk: Base: 0x92000000; Size: 0x54ecaf [0011.159] I> Updated initrd info to DTB [0011.159] W> WARN: Fail to override "console=none" in commandline [0011.160] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0011.166] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0011.174] W> No valid slot number is found in scratch register [0011.179] W> Return default slot: _a [0011.183] I> Active slot suffix: [0011.186] I> add_boot_slot_suffix: slot_suffix = [0011.190] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt tegra_fbmem=0x800000@0xa069c000 lut_mem=0x2008@0xa0697000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.rat [0011.220] I> Updated bootarg info to DTB [0011.224] W> MAC addr invalid! [0011.227] E> Failed to get WIFI MAC address [0011.231] W> MAC addr invalid! [0011.233] E> Failed to get Bluetooth MAC address [0011.238] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:e5:93:77 [0011.245] W> "plugin-manager" doesn't exist, creating [0011.249] I> Adding /chosen/plugin-manager/cvm [0011.253] W> "chip-id" doesn't exist, creating [0011.257] I> Adding /chosen/plugin-manager/chip-id [0011.262] W> "configs" doesn't exist, creating [0011.266] I> Adding /chosen/plugin-manager/configs [0011.271] W> "ids" doesn't exist, creating [0011.275] I> Adding /chosen/plugin-manager/ids [0011.280] W> "odm-data" doesn't exist, creating [0011.284] I> Adding /chosen/plugin-manager/odm-data [0011.291] W> "memory" doesn't exist, creating [0011.293] I> [0] START: 0x80000000, END: 0xac000000 [0011.297] I> [1] START: 0xac004000, END: 0xf09d0000 [0011.302] I> [2] START: 0xf09dc000, END: 0xf09e0000 [0011.307] I> dram_block larger than 80000000 [0011.311] I> [3] START: 0x100000000, END: 0x880000000 [0011.316] I> added [base:0x80000000, size:0x2c000000] to /memory [0011.322] I> added [base:0xac200000, size:0x44600000] to /memory [0011.327] I> added [base:0x100000000, size:0x780000000] to /memory [0011.334] I> Updated memory info to DTB [0011.337] E> add_disp_param: failed to get display params for du=1 [0011.343] W> "reset" doesn't exist, creating [0011.348] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0011.352] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0011.357] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0011.361] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0011.366] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0011.371] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0011.376] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0011.380] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0011.386] W> "misc-data" doesn't exist, creating [0011.390] I> Boot-device: eMMC [0011.392] I> Add boot-sdmmc to plugin-manager/misc-data [0011.398] I> Add storage-sdmmc to plugin-manager/misc-data [0011.403] W> Unknown storage device [0011.406] I> Add serial number:1421220031343 as DT property [0011.412] I> Plugin-manager override starting [0011.416] I> node /plugin-manager/fragment-pcie-c5-rp matches [0011.423] I> node /plugin-manager/fragement-tegra-wdt-en matches [0011.431] I> Disable plugin-manager status in FDT [0011.432] I> Plugin-manager override finished successfully [0011.437] I> tegrabl_load_kernel_and_dtb: Done [0011.462] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3357) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Jun 25 21:22:12 PDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 780000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a069c000 [ 0.000000] Found lut_mem: 00002008@a0697000 ����Shutdown state requested 1 Rebooting system ... �� [0000.055] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.063] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.069] I> Boot-mode: Coldboot [0000.071] I> Chip revision : A02P [0000.075] I> Bootrom patch version : 15 (correctly patched) [0000.080] I> ATE fuse revision : 0x200 [0000.083] I> Ram repair fuse : 0x0 [0000.086] I> Ram Code : 0x2 [0000.089] I> rst_source : 0xb [0000.091] I> rst_level : 0x1 [0000.095] I> Boot-device: eMMC [0000.110] I> sdmmc DDR50 mode [0000.114] W> No valid slot number is found in scratch register [0000.120] W> Return default slot: _a [0000.123] I> Active Boot chain : 0 [0000.126] I> Boot-device: eMMC [0000.130] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.136] I> Temperature = 32000 [0000.139] W> Skipping boost for clk: BPMP_CPU_NIC [0000.143] W> Skipping boost for clk: BPMP_APB [0000.147] W> Skipping boost for clk: AXI_CBB [0000.151] W> Skipping boost for clk: AON_CPU_NIC [0000.156] W> Skipping boost for clk: CAN1 [0000.159] W> Skipping boost for clk: CAN2 [0000.164] I> Boot-device: eMMC [0000.166] I> Boot-device: eMMC [0000.176] I> Sdmmc: HS400 mode enabled [0000.180] I> ECC region[0]: Start:0x0, End:0x0 [0000.184] I> ECC region[1]: Start:0x0, End:0x0 [0000.189] I> ECC region[2]: Start:0x0, End:0x0 [0000.193] I> ECC region[3]: Start:0x0, End:0x0 [0000.197] I> ECC region[4]: Start:0x0, End:0x0 [0000.201] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.207] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.211] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.216] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.220] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.225] E> FAILED: Thermal config [0000.233] E> FAILED: MEMIO rail config [0000.252] I> Boot-device: eMMC [0000.261] I> sdmmc bdev is already initialized [0000.334] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.342] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-2dfe4beb) [0000.343] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.344] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.344] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.350] W> device prod register failed [0000.354] I> Boot-device: eMMC [0000.357] I> Boot_device: SDMMC_BOOT instance: 3 [0000.363] I> sdmmc-3 params source = boot args [0000.366] I> sdmmc bdev is already initialized [0000.370] I> sdmmc-3 params source = boot args [0000.376] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.383] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.386] W> No valid slot number is found in scratch register [0000.391] W> Return default slot: _a [0000.394] I> Active Boot chain : 0 [0000.398] I> parsing oem signed section of bpmp-fw header done [0000.403] I> bpmp-fw binary init read from storage [0000.408] I> oem authentication of bpmp-fw header done [0000.415] I> bpmp-fw binary done read from storage [0000.417] I> bpmp-fw: Authentication init Done [0000.422] I> parsing oem signed section of cpubl header done [0000.427] I> cpubl binary init read from storage [0000.432] I> bpmp-fw: Authentication Finalize Done [0000.436] I> oem authentication of cpubl header done [0000.441] I> cpubl binary done read from storage [0000.446] I> cpubl: Authentication init Done [0000.451] I> parsing oem signed section of rce header done [0000.455] I> rce binary init read from storage [0000.460] I> Relocating BR-BCT [0000.462] I> cpubl: Authentication Finalize Done [0000.467] I> oem authentication of rce header done [0000.471] I> rce binary done read from storage [0000.476] I> rce: Authentication init Done [0000.480] I> parsing oem signed section of ape header done [0000.485] I> ape binary init read from storage [0000.489] I> rce: Authentication Finalize Done [0000.494] I> oem authentication of ape header done [0000.498] I> ape binary done read from storage [0000.502] I> ape: Authentication init Done [0000.508] I> parsing oem signed section of tos header done [0000.512] I> tos binary init read from storage [0000.516] I> ape: Authentication Finalize Done [0000.521] I> oem authentication of tos header done [0000.525] I> tos binary done read from storage [0000.529] I> tos: Authentication init Done [0000.534] I> parsing oem signed section of bpmp-fw-dtb header done [0000.539] I> bpmp-fw-dtb binary init read from storage [0000.544] I> tos: Authentication Finalize Done [0000.550] I> oem authentication of bpmp-fw-dtb header done [0000.557] I> bpmp-fw-dtb binary done read from storage [0000.559] I> bpmp-fw-dtb: Authentication init Done [0000.564] I> parsing oem signed section of cpubl-dtb header done [0000.569] I> cpubl-dtb binary init read from storage [0000.574] I> bpmp-fw-dtb: Authentication Finalize Done [0000.611] I> oem authentication of cpubl-dtb header done [0000.612] I> cpubl-dtb binary done read from storage [0000.613] I> cpubl-dtb: Authentication init Done [0000.614] I> parsing oem signed section of eks header done [0000.615] I> eks binary init read from storage [0000.616] I> cpubl-dtb: Authentication Finalize Done [0000.616] I> oem authentication of eks header done [0000.620] I> eks binary done read from storage [0000.624] I> eks: Authentication init Done [0000.628] I> eks: Authentication Finalize Done [0000.632] I> EKB detected (length: 0x410) @ VA:0x5270a400 ��NOTICE: BL31: v1.3(release):41d46a9cf NOTICE: BL31: Built : 21:14:52, Jun 25 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized �� ��mrq initialized ��[0001.136] I> Welcome to Cboot ��fmon_post initialized ��[0001.137] I> Cboot Version: t194-18fdfe28 [0001.137] I> CPU-BL Params @ 0xf2820000 [0001.137] I> 0) Base:0x00000000 Size:0x00000000 [0001.141] I> 1) Base:0xf1100000 Size:0x00100000 [0001.146] I> 2) Base:0xf2000000 Size:0x00200000 [0001.150] I> 3) Base:0xf1200000 Size:0x00200000 ��clk_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ��[0001.155] I> 4) Base:0xf1000000 Size:0x00100000 [0001.260] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.264] I> 6) Base:0xf3800000 Size:0x00400000 [0001.269] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.273] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.278] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.282] I> 10) Base:0xf3000000 Size:0x00800000 [0001.286] I> 11) Base:0x40000000 Size:0x00040000 [0001.291] I> 12) Base:0xf0c00000 Size:0x00100000��emc_debugfs initialized dvs_debugfs initialized fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] �� [0001.346] I> 13) Base:0x40046000 Size:0x00002000 [0001.350] I> 14) Base:0x40048000 Size:0x00002000 [0001.355] I> 15) Base:0xac000000 Size:0x00004000 [0001.359] I> 16) Base:0x4004a000 Size:0x00002000 [0001.364] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.368] I> 18) Base:0x4004c000 Size:0x00002000 [0001.373] I> 19) Base:0xf2200000 Size:0x00600000 [0001.377] I> 20) Base:0x4004e000 Size:0x00002000 [0001.381] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.386] I> 22) Base:0x00000000 Size:0x00000000 [0001.390] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.395] I> 24) Base:0xf6000000 Size:0x02000000 [0001.399] I> 25) Base:0x40050000 Size:0x00002000 [0001.404] I> 26) Base:0x40040000 Size:0x00006000 [0001.408] I> 27) Base:0xf1800000 Size:0x00400000 [0001.413] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.417] I> 29) Base:0xf1400000 Size:0x00400000 [0001.422] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.426] I> 31) Base:0x00000000 Size:0x00000000 [0001.431] I> 32) Base:0xf8000000 Size:0x08000000 [0001.435] I> 33) Base:0x00000000 Size:0x00000000 [0001.439] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.444] I> 35) Base:0xab000000 Size:0x01000000 [0001.448] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.453] I> 37) Base:0xf2800000 Size:0x00800000 [0001.457] I> 38) Base:0x80000000 Size:0x20000000 [0001.462] I> 39) Base:0xb0000000 Size:0x08000000 [0001.466] I> 40) Base:0x00000000 Size:0x00000000 [0001.471] I> 41) Base:0x00000000 Size:0x00000000 [0001.475] I> 42) Base:0x00000000 Size:0x00000000 [0001.480] I> 43) Base:0x00000000 Size:0x00000000 [0001.484] I> 44) Base:0x00000000 Size:0x00000000 [0001.489] I> 45) Base:0x00000000 Size:0x00000000 [0001.493] GIC-SPI Target CPU: 0 [0001.496] Interrupts Init done [0001.499] calling constructors [0001.502] initializing heap [0001.504] I> Heap: [0xa06905a8 ... 0xab000000] [0001.509] initializing threads [0001.512] initializing timers [0001.514] creating bootstrap completion thread [0001.519] top of bootstrap2() [0001.521] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.526] initializing platform [0001.529] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.534] W> device prod register failed [0001.538] I> Bl_dtb @0xaaf00000 [0001.544] W> "plugin-manager" doesn't exist, creating [0001.546] W> "ids" doesn't exist, creating [0001.550] W> "connection" doesn't exist, creating [0001.555] W> "configs" doesn't exist, creating [0001.566] I> Find /i2c@3160000's alias i2c0 [0001.566] I> Reading eeprom i2c=0 address=0x50 [0001.593] I> Device at /i2c@3160000:0x50 [0001.593] I> Reading eeprom i2c=0 address=0x56 [0001.617] I> Device at /i2c@3160000:0x56 [0001.619] I> Find /i2c@3180000's alias i2c2 [0001.620] I> Reading eeprom i2c=2 address=0x54 [0001.621] E> I2C: slave not found in slaves. [0001.621] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.622] E> I2C_DEV: Failed to send register address 0x00000000. [0001.623] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.631] E> eeprom: Failed to read I2C slave device [0001.636] I> Eeprom read failed 0x3526070d [0001.640] I> Reading eeprom i2c=2 address=0x57 [0001.645] E> I2C: slave not found in slaves. [0001.649] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.656] E> I2C_DEV: Failed to send register address 0x00000000. [0001.662] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.671] E> eeprom: Failed to read I2C slave device [0001.676] I> Eeprom read failed 0x3526070d [0001.680] I> Reading eeprom i2c=2 address=0x52 [0001.685] E> I2C: slave not found in slaves. [0001.689] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.697] E> I2C_DEV: Failed to send register address 0x00000000. [0001.702] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.712] E> eeprom: Failed to read I2C slave device [0001.716] I> Eeprom read failed 0x3526070d [0001.722] I> Find /i2c@c240000's alias i2c1 [0001.724] I> Reading eeprom i2c=1 address=0x52 [0001.730] E> I2C: slave not found in slaves. [0001.733] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.741] E> I2C_DEV: Failed to send register address 0x00000000. [0001.746] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.756] E> eeprom: Retry to read I2C slave device. [0001.761] E> I2C: slave not found in slaves. [0001.765] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.772] E> I2C_DEV: Failed to send register address 0x00000000. [0001.778] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.787] E> eeprom: Failed to read I2C slave device [0001.792] I> Eeprom read failed 0x3526070d [0001.796] I> Reading eeprom i2c=1 address=0x50 [0001.801] E> I2C: slave not found in slaves. [0001.805] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.813] E> I2C_DEV: Failed to send register address 0x00000000. [0001.818] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.828] E> eeprom: Retry to read I2C slave device. [0001.832] E> I2C: slave not found in slaves. [0001.836] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.844] E> I2C_DEV: Failed to send register address 0x00000000. [0001.850] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.859] E> eeprom: Failed to read I2C slave device [0001.864] I> Eeprom read failed 0x3526070d [0001.868] I> create_pm_ids: id: 2888-0004-400-K, len: 15 [0001.873] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.884] I> create_pm_ids: id: 2822-0000-700-J, len: 15 [0001.890] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.901] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0001.909] W> "i2c@3160000" doesn't exist, creating [0001.912] W> "module@0x50" doesn't exist, creating [0001.917] I> Adding plugin-manager/ids/2822-0000-700=/i2c@3160000:module@0x56 [0001.924] W> "module@0x56" doesn't exist, creating [0001.930] I> Adding plugin-manager/cvm [0001.932] W> "chip-id" doesn't exist, creating [0001.936] I> Adding plugin-manager/chip-id/A02P [0001.941] I> Plugin-manager override starting [0001.946] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.954] I> node /plugin-manager/fragement-soft-wdt matches [0001.963] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.968] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0001.976] I> Disable plugin-manager status in FDT [0001.977] I> Plugin-manager override finished successfully [0001.978] I> gpio framework initialized [0001.983] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0001.990] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0001.997] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.004] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.012] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.018] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.024] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.032] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.040] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.046] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.054] I> fixed regulator driver initialized [0002.064] I> register 'maxim' power off handle [0002.065] I> virtual i2c enabled [0002.065] I> registered 'maxim,max20024' pmic [0002.068] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.075] I> Boot-device: eMMC [0002.078] I> Boot_device: SDMMC_BOOT instance: 3 [0002.086] I> sdmmc-3 params source = boot args [0002.087] I> create_pm_ids: id: 2888-0004-400-K, len: 15 [0002.092] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.103] I> create_pm_ids: id: 2822-0000-700-J, len: 15 [0002.108] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.119] I> sdmmc bdev is already initialized [0002.123] I> sdmmc-3 params source = boot args [0002.154] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.166] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.175] I> enabling 'vdd-hdmi-5v0' regulator [0002.180] I> regulator 'vdd-hdmi-5v0' already enabled [0002.180] I> hdmi cable connected [0002.182] W> set volts not configured for 'vdd-1v0' [0002.184] W> set volts not configured for 'vdd-1v8-hs' [0002.188] E> invalid display type [0002.191] E> invalid display type [0002.192] E> cannot find any other nvdisp nodes [0002.207] I> edid read success [0002.220] I> edid read success [0002.220] I> width = 640, height = 480, frequency = 25174825 [0002.221] I> width = 640, height = 480, frequency = 25174825 [0002.221] I> width = 2560, height = 1440, frequency = 241500000 [0002.221] I> width = 1920, height = 1080, frequency = 148500000 [0002.222] I> width = 1920, height = 1080, frequency = 148351648 [0002.226] I> width = 1280, height = 720, frequency = 74175824 [0002.232] I> width = 720, height = 480, frequency = 26973026 [0002.237] I> width = 720, height = 480, frequency = 26973026 [0002.243] I> width = 640, height = 480, frequency = 25174825 [0002.248] I> width = 720, height = 576, frequency = 26973026 [0002.254] I> width = 720, height = 576, frequency = 26973026 [0002.259] I> width = 1280, height = 720, frequency = 74175824 [0002.265] I> width = 1920, height = 1080, frequency = 148351648 [0002.271] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.281] I> hdmi_enable, starting HDMI initialisation [0002.286] I> hdmi_enable, HDMI initialisation complete [0002.297] I> Load in CBoot Boot Options partition and parse it [0002.303] E> Error -9 when finding node with path /boot-configuration [0002.304] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.306] I> Hit any key to stop autoboot: 4 3 2 1 [0004.314] initializing target [0004.314] calling apps_init() [0004.315] starting app kernel_boot_app [0004.334] I> found decompressor handler: lz4-legacy [0004.335] I> decompressing BMP blob ... [0004.339] I> Kernel type = Normal [0004.339] I> Loading kernel-bootctrl from partition [0004.339] I> Loading partition kernel-bootctrl at 0xa4ac0000 from device(0x1) [0004.346] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.346] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.347] I> ########## SD boot ########## [0004.351] I> Found sdcard [0004.355] I> enabling 'vdd-sdmmc1-sw' regulator [0004.361] I> regulator 'vdd-sdmmc1-sw' already enabled [0004.389] I> sdmmc SDR mode [0004.404] I> -0 params source = [0004.412] I> Found 11 partitions in SDCARD (instance 0) [0004.413] I> Look for boot partition [0004.413] I> Fallback: assuming 0th partition is boot partition [0004.413] I> Detect filesystem [0004.434] I> Loading extlinux.conf ... [0004.434] I> rootfs path: /sd/boot/extlinux/extlinux.conf [0004.463] I> L4T boot options [0004.463] I> [1]: "primary kernel" [0004.463] I> Enter choice: [0007.464] I> Continuing with default option: 1 [0007.464] I> Loading kernel sig file from rootfs ... [0007.464] I> rootfs path: /sd/boot/Image.sig [0007.477] I> Loading kernel binary from rootfs ... [0007.477] I> rootfs path: /sd/boot/Image