[ 0.450656] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.451700] iommu: Adding device 3530000.xhci to group 44 [ 0.451723] arm-smmu: forcing sodev map for 3530000.xhci [ 0.452149] iommu: Adding device 3550000.xudc to group 45 [ 0.452172] arm-smmu: forcing sodev map for 3550000.xudc [ 0.452873] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.452891] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.453470] iommu: Adding device 17000000.gp10b to group 46 [ 0.454464] tegra-reset 5000000.clock: registered 193 resets. [ 0.456542] iommu: Adding device d000000.bpmp to group 47 [ 0.456758] bpmp: ping status is 0 [ 0.456858] bpmp d000000.bpmp: firmware tag is 69fa4e41a01fc02a4db1adf71922a54c [ 0.460138] bpmp d000000.bpmp: probe ok [ 0.465581] iommu: Adding device 2600000.dma to group 48 [ 0.467378] GPIO line 424 (wifi-enable) hogged as output/high [ 0.467443] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.467499] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.467936] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.474716] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.475065] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.477582] iommu: Adding device 10003000.pcie-controller to group 49 [ 0.477640] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.478231] iommu: Adding device sound to group 50 [ 0.478677] iommu: Adding device 3510000.hda to group 51 [ 0.490167] iommu: Adding device c1a0000.aon to group 52 [ 0.490849] vdd-ac-bat: 5000 mV [ 0.493306] vdd-1v8-ap: 1800 mV [ 0.517518] random: fast init done [ 0.526834] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.532214] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.532712] SCSI subsystem initialized [ 0.533170] usbcore: registered new interface driver usbfs [ 0.533244] usbcore: registered new interface driver hub [ 0.533380] usbcore: registered new device driver usb [ 0.536948] GPIO line 241 (touch-rails) hogged as output/high [ 0.537231] GPIO line 242 (touch-rails) hogged as output/high [ 0.537524] gpiochip_setup_dev: registered GPIOs 240 to 255 on device: gpiochip2 (tca9539) [ 0.538628] GPIO line 228 (lcd-bias-rails) hogged as output/high [ 0.538900] gpiochip_setup_dev: registered GPIOs 224 to 239 on device: gpiochip3 (tca9539) [ 0.550569] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.558028] vddio-ddr: at 1125 mV [ 0.561868] avdd_dsi_csi: 1200 mV [ 0.565879] vdd-1v8: 1800 mV [ 0.569900] vdd-3v3-sys: 3300 mV [ 0.571362] spmic-ldo0: at 1800 mV [ 0.572373] spmic-ldo1: at 800 mV [ 0.577896] vddio-3v3: 3300 mV [ 0.578772] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.581877] vdd-rtc: at 800 mV [ 0.582867] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.585872] spmic-ldo6: at 1500 mV [ 0.589876] vdd-pex-1v00: 1000 mV [ 0.590643] dvdd-pex: 1000 mV [ 0.591288] GPIO line 221 (spmic_gpio_input) hogged as input [ 0.591518] GPIO line 222 (spmic_gpio_input) hogged as input [ 0.591912] gpiochip_setup_dev: registered GPIOs 216 to 223 on device: gpiochip4 (max77620-gpio) [ 0.594243] max77620 4-003c: max77620 probe successful [ 0.594811] media: Linux media interface: v0.10 [ 0.594903] Linux video capture interface: v2.00 [ 0.597949] pps_core: LinuxPPS API ver. 1 registered [ 0.597991] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.598054] PTP clock support registered [ 0.598637] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.598721] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.601423] tegra_fiq_debugger_init: found FIQ source (IRQ 386) [ 0.605925] Advanced Linux Sound Architecture Driver Initialized. [ 0.606626] Bluetooth: Core ver 2.22 [ 0.606755] NET: Registered protocol family 31 [ 0.606785] Bluetooth: HCI device and connection manager initialized [ 0.606821] Bluetooth: HCI socket layer initialized [ 0.606851] Bluetooth: L2CAP socket layer initialized [ 0.606896] Bluetooth: SCO socket layer initialized [ 0.607934] en-vdd-sd: 3300 mV [ 0.608734] en-vdd-cam: 1800 mV [ 0.613872] vdd-hdmi: 5000 mV [ 0.614355] vdd-usb0-5v: 5000 mV [ 0.614722] vdd-usb1-5v: 5000 mV [ 0.617869] en-vdd-ts-1v8: 1800 mV [ 0.621885] en-vdd-ts-hv-3v3: 3300 mV [ 0.622550] en-vdd-disp-3v3: 3300 mV [ 0.623135] en-mdm-pwr-3v7: 3700 mV [ 0.623723] en-vdd-disp-1v8: 1800 mV [ 0.624357] en-vdd-cam-hv-2v8: 2800 mV [ 0.624924] en-vdd-cam-1v2: 1200 mV [ 0.625530] vdd-fan: 5000 mV [ 0.625876] vdd-3v3: 3300 mV [ 0.626627] dis-vdd-1v2: 1200 mV [ 0.627010] en-vdd-vcm-2v8: 2800 mV [ 0.627653] vdd-usb2-5v: 5000 mV [ 0.628044] vdd-sys-bl: 3300 mV [ 0.628724] en-vdd-sys: 1200 mV [ 0.631797] camchar: rtcpu character device driver loaded [ 0.632455] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.634523] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:2 [ 0.635508] clocksource: Switched to clocksource arch_sys_counter [ 0.674979] VFS: Disk quotas dquot_6.6.0 [ 0.675301] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.675951] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.676945] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.676985] nvmap_page_pool_init: Total RAM pages: 2008258 [ 0.677015] nvmap_page_pool_init: nvmap page pool size: 251032 pages (980 MB) [ 0.677214] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.681044] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.692917] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.693137] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.693612] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.693736] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.693894] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.694055] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.694262] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.694556] la/ptsa driver initialized. [ 0.694585] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.694607] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.695802] NET: Registered protocol family 2 [ 0.697805] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.698409] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.699206] TCP: Hash tables configured (established 65536 bind 65536) [ 0.699277] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.699419] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.700369] NET: Registered protocol family 1 [ 0.701517] RPC: Registered named UNIX socket transport module. [ 0.701545] RPC: Registered udp transport module. [ 0.701566] RPC: Registered tcp transport module. [ 0.701585] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.701884] Trying to unpack rootfs image as initramfs... [ 0.721890] host1x 13e10000.host1x: initialized [ 0.723305] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.727673] audit: initializing netlink subsys (disabled) [ 0.727746] audit: type=2000 audit(0.616:1): initialized [ 0.728424] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.740059] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.742689] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.744534] 9p: Installing v9fs 9p2000 file system support [ 0.750707] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.750884] io scheduler noop registered [ 0.751553] io scheduler cfq registered (default) [ 0.756491] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.817941] iommu: Adding device aconnect@2a41000:adsp_audio to group 53 [ 0.857903] iommu: Adding device 2993000.adsp to group 54 [ 0.859124] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.862659] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 0.866914] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.868463] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.869846] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.871199] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.874004] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 0.875148] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.875708] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 0.876014] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.876193] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1000000, vi_iso_bw=4500000, max_bw=4500000 [ 0.878159] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.879721] tsec 15500000.tsec: initialized [ 0.880932] tsec 15100000.tsecb: initialized [ 0.883657] nvdec 15480000.nvdec: initialized [ 0.888330] falcon 15340000.vic: initialized [ 0.889982] falcon 154c0000.nvenc: initialized [ 0.891550] falcon 15380000.nvjpg: initialized [ 0.895619] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.897304] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.898985] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.900625] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.902298] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.903942] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.905478] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.907078] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.910138] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.910186] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.910241] tegradccommon 15200000.dc_common: dma mapping done [ 0.912076] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 0.912230] generic_infoframe_type: 0x87 [ 0.912480] tegradc 15210000.nvdisplay: DT parsed successfully [ 0.912568] tegradc 15210000.nvdisplay: Display dc.ffffff800b610000 registered with id=0 [ 0.922333] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.922386] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.922423] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.922749] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 0.922780] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 0.924442] tegradc 15210000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 0.924487] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 10 channels [ 0.925483] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.926236] kfuse 3830000.kfuse: initialized [ 0.927935] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 0.927974] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 0.928249] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.932257] tegradc 15210000.nvdisplay: probed [ 0.939992] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.943430] console [ttyS0] disabled [ 0.943582] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 1.349627] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.758093] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.166673] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.168713] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.575205] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.982895] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.239918] console [ttyS0] enabled [ 3.241170] Console: switching to colour frame buffer device 240x67 [ 3.242611] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 3.244646] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 3.245097] serial-tegra 3130000.serial: RX in PIO mode [ 3.246087] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 3.251814] [drm] Initialized [ 3.282833] brd: module loaded [ 3.289479] tegradc 15210000.nvdisplay: fb registered [ 3.291242] loop: module loaded [ 3.291368] tegra_profiler: version: 1.132, samples/io: 46/26 [ 3.291459] tegra_profiler: auth: init [ 3.291888] nct1008_nct72 7-004c: starting parse dt [ 3.291990] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 3.291999] nct1008_nct72 7-004c: success parsing dt [ 3.292095] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 3.292366] THERMAL EST: found 3 subdevs [ 3.292370] THERMAL EST num_resources: 0 [ 3.292373] [THERMAL EST subdev 0] [ 3.292378] [THERMAL EST subdev 1] [ 3.292381] [THERMAL EST subdev 2] [ 3.292703] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 3.292705] THERMAL EST: thz register success. [ 3.292853] THERMAL EST: end of probe, return err: 0 [ 3.293800] hisi_sas: driver version v1.6 [ 3.297823] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 3.297834] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 3.303293] scsi host0: tegra_ahci [ 3.308334] scsi host1: tegra_ahci [ 3.308513] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 3.308517] ata2: DUMMY [ 3.314101] libphy: Fixed MDIO Bus: probed [ 3.314472] tun: Universal TUN/TAP device driver, 1.6 [ 3.314475] tun: (C) 1999-2004 Max Krasnyansky [ 3.319155] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.319158] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.319208] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.319210] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.319240] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.319242] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.319294] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 3.319296] Copyright(c) 1999 - 2017 Intel Corporation. [ 3.320473] eqos 2490000.ether_qos: no PHY interrupt found [ 3.320746] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 3.324366] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 3.324852] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 3.327763] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b c4 e8 17 [ 3.327879] libphy: dwc_phy: probed [ 3.328287] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 3.330631] PPP generic driver version 2.4.2 [ 3.330937] PPP BSD Compression module registered [ 3.330941] PPP Deflate Compression module registered [ 3.330958] PPP MPPE Compression module registered [ 3.330962] NET: Registered protocol family 24 [ 3.331015] usbcore: registered new interface driver r8152 [ 3.331042] usbcore: registered new interface driver asix [ 3.331066] usbcore: registered new interface driver ax88179_178a [ 3.331086] usbcore: registered new interface driver cdc_ether [ 3.331111] usbcore: registered new interface driver net1080 [ 3.331131] usbcore: registered new interface driver cdc_subset [ 3.331152] usbcore: registered new interface driver zaurus [ 3.331182] usbcore: registered new interface driver cdc_ncm [ 3.331486] VFIO - User Level meta-driver version: 0.3 [ 3.337230] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.337250] ehci-pci: EHCI PCI platform driver [ 3.337275] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.337283] ohci-pci: OHCI PCI platform driver [ 3.337312] ohci-platform: OHCI generic platform driver [ 3.342250] usbcore: registered new interface driver uas [ 3.342381] usbcore: registered new interface driver usb-storage [ 3.342553] usbcore: registered new interface driver usbserial [ 3.346713] tegra-xudc-new 3550000.xudc: device count: 1 [ 3.348461] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 3.348486] tegra-xudc-new 3550000.xudc: entering ELPG [ 3.350093] tegra-xudc-new 3550000.xudc: entering ELPG done [ 3.350258] mousedev: PS/2 mouse device common for all mice [ 3.350369] usbcore: registered new interface driver xpad [ 3.357580] nct1008_nct72 7-004c: initial LOC temp: 37000 [ 3.357882] nct1008_nct72 7-004c: initial EXT temp: 50000 [ 3.358480] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 3.358770] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 3.358947] nct1008_nct72 7-004c: nct1008_probe: initialized [ 3.483012] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.484240] Wake73 for irq=42 [ 3.485539] rtc rtc1: alarm rtc device [ 3.485553] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 3.485593] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.485800] i2c /dev entries driver [ 3.488025] pca954x 2-0071: vcc-pullup regulator not found [ 3.488038] pca954x 2-0071: pca954x_probe: forcing device bus number, start 30. [ 3.488147] tegra-i2c 3180000.i2c: no acknowledge from address 0x71 [ 3.488180] pca954x 2-0071: probe failed [ 3.488729] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.492914] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 0 not supported [ 3.493455] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 3 not supported [ 3.494914] parse_throttle_dt_data: Num cap clks = 4 [ 3.494918] parse_throttle_dt_data: clk=mcpu type=1 [ 3.494921] parse_throttle_dt_data: clk=bcpu type=2 [ 3.494928] parse_throttle_dt_data: clk=gpu type=4 [ 3.494931] parse_throttle_dt_data: clk=emc type=3 [ 3.496151] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.496730] FAN dev name: pwm-fan [ 3.496790] FAN:gpio request success. [ 3.496798] FAN: can't find tach_gpio [ 3.496831] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 3.497127] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 3.497132] pwm_fan_driver pwm-fan: tach period: 1000 [ 3.497491] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 3.497496] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 3.497525] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 3.497529] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 3.497534] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 3.497537] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 3.497541] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 3.497544] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 3.497549] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 3.497554] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 3.499424] device-mapper: uevent: version 1.0.3 [ 3.500913] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.522184] cpufreq: platform driver Initialization: pass [ 3.526977] cpuidle: Initializing cpuidle driver init for Denver cluster [ 3.527093] cpuidle: Initializing cpuidle driver init for A57 cluster [ 3.532456] sdhci: Secure Digital Host Controller Interface driver [ 3.532458] sdhci: Copyright(c) Pierre Ossman [ 3.532459] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.533978] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 3.535943] CMDQ: cmdq_platfm_init successful [ 3.537145] CQE: CMD_TIMING bit set for R1B DCMD [ 3.539951] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 3.543736] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 3.543775] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 3.544371] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 3.546036] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 257 [ 3.550773] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.587522] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.587587] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.599593] gpio tegra-gpio wake71 for gpio=125(P:5) [ 3.599632] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.620758] ata1: SATA link down (SStatus 0 SControl 300) [ 3.641907] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.647072] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.647079] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.663807] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.665053] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 3.773848] mmc0: periodic cache flush enabled [ 3.773863] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 3.774558] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 3.774801] mmcblk0boot0: mmc0:0001 032G34 partition 1 4.00 MiB [ 3.774998] mmcblk0boot1: mmc0:0001 032G34 partition 2 4.00 MiB [ 3.775218] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 3.777894] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 [ 3.922364] mmc1: Applying tuning correction [ 3.922391] mmc1: Tap value after applying correction 61 [ 3.922398] mmc1: hw tuning done ... [ 3.929667] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 4.140914] gpio tegra-gpio wake21 for gpio=121(P:1) [ 4.146502] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4.152603] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4.158699] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 4.166268] Parent Clock set for DC plld2 [ 4.225258] tegradc 15210000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 4.234782] tegradc 15210000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 4.242719] tegradc 15210000.nvdisplay: hdmi: BL set VIC 0 [ 4.248220] tegradc 15210000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 4.256777] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4.264045] Extcon AUX1(HDMI) enable [ 4.268820] tegra-se-nvhost 15810000.se: initialized [ 4.274978] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 4.282046] tegra-se-nvhost 15820000.se: initialized [ 4.288206] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 4.295254] tegra-se-nvhost 15830000.se: initialized [ 4.300894] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 4.307861] tegra-se-nvhost 15840000.se: initialized [ 4.313824] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 4.320244] hidraw: raw HID events driver (C) Jiri Kosina [ 4.326916] usbcore: registered new interface driver usbhid [ 4.332514] usbhid: USB HID core driver [ 4.342192] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 4.353215] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 4.361722] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.373849] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 4.384631] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 4.397365] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 4.407820] tegradc 15210000.nvdisplay: blank - powerdown [ 4.407895] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 4.407966] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 4.408015] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 4.411596] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 4.412143] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (51) [ 4.412146] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 4.413021] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 4.414314] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.414875] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.415043] register_ari_mca_banks: Registered MCA ROC:IOB [ 4.415113] register_ari_mca_banks: Registered MCA ROC:CCE [ 4.415396] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.415399] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 4.415401] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 4.415458] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.415460] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 4.415462] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 4.415546] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.415548] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 4.415550] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 4.415604] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.415607] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 4.415609] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 4.415667] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.415670] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 4.415671] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 4.415723] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.415727] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 4.415729] tegra18-bridge 2100000.axip2p: bridge probed OK [ 4.415785] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.415790] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 4.415792] tegra18-bridge 2110000.axip2p: bridge probed OK [ 4.415842] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.415847] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 4.415848] tegra18-bridge 2120000.axip2p: bridge probed OK [ 4.415902] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.415907] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 4.415909] tegra18-bridge 2130000.axip2p: bridge probed OK [ 4.415968] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.415971] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 4.415972] tegra18-bridge 2140000.axip2p: bridge probed OK [ 4.416023] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.416029] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 4.416030] tegra18-bridge 2150000.axip2p: bridge probed OK [ 4.416080] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.416086] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 4.416087] tegra18-bridge 2160000.axip2p: bridge probed OK [ 4.416140] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.416146] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 4.416148] tegra18-bridge 2170000.axip2p: bridge probed OK [ 4.416198] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.416203] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 4.416205] tegra18-bridge 2180000.axip2p: bridge probed OK [ 4.416253] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.416258] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 4.416260] tegra18-bridge 2190000.axip2p: bridge probed OK [ 4.416310] tegra18_a57_serr_init: on CPU 1 a Denver Core [ 4.416363] tegra18x_actmon d230000.actmon: in actmon_register()... [ 4.416970] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 4.417360] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 4.417459] denver_knobs_init:MTS_VERSION:43068234 [ 4.418952] nvpmodel: initialized successfully [ 4.420347] usbcore: registered new interface driver snd-usb-audio [ 4.437867] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 4.438096] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 4.442327] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 4.442330] Extcon AUX1(HDMI) disable [ 4.466882] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 4.468100] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 4.468624] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 4.492262] tegradc 15210000.nvdisplay: unblank [ 4.494216] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4.494309] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4.494404] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 4.496025] Parent Clock set for DC plld2 [ 4.501629] tegradc 15210000.nvdisplay: hdmi: tmds rate:154000K prod-setting:prod_c_hdmi_111m_223m [ 4.503133] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 4.503154] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 4.507077] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4.507079] Extcon AUX1(HDMI) enable [ 4.510453] OPE platform probe [ 4.510546] OPE platform probe successful [ 4.512520] tegra-asoc: sound: This is a dummy codec [ 4.563799] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 4.563887] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 4.563971] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 4.564080] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 4.564170] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 4.564256] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 4.564336] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 4.564422] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 4.564503] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 4.564584] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 4.564671] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 4.564768] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 4.564851] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 4.564940] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 4.565026] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 4.565129] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 4.565217] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 4.565297] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 4.565380] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 4.565462] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 4.609601] u32 classifier [ 4.609604] Actions configured [ 4.609682] Initializing XFRM netlink socket [ 4.611302] NET: Registered protocol family 10 [ 4.612584] NET: Registered protocol family 17 [ 4.612596] NET: Registered protocol family 15 [ 4.612800] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.612881] Bluetooth: RFCOMM socket layer initialized [ 4.612895] Bluetooth: RFCOMM ver 1.11 [ 4.612899] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.612907] Bluetooth: HIDP socket layer initialized [ 4.612926] 9pnet: Installing 9P2000 support [ 4.612969] Key type dns_resolver registered [ 4.613211] Registered cp15_barrier emulation handler [ 4.613225] Registered setend emulation handler [ 4.614700] registered taskstats version 1 [ 4.618301] isp 15600000.isp: initialized [ 4.622940] nvcsi 150c0000.nvcsi: initialized [ 4.629792] tegra-vi4 15700000.vi: initialized [ 4.630734] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 4.630802] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 4.630866] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 4.631011] input: gpio-keys as /devices/gpio-keys/input/input2 [ 4.631132] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 4.664178] tegra_rtc c2a0000.rtc: setting system clock to 2019-04-08 14:24:34 UTC (1554733474) [ 4.665081] mmcblk mmc0:0001: Card claimed for testing. [ 4.702804] bpmp: mounted debugfs mirror [ 4.704807] bwmgr: missing cdev-type property [ 4.710580] spmic-ldo0: disabling [ 4.710786] spmic-ldo1: disabling [ 4.710959] en-vdd-sd: disabling [ 4.710961] en-vdd-cam: disabling [ 4.710964] vdd-usb0-5v: disabling [ 4.710967] vdd-usb1-5v: disabling [ 4.710971] en-vdd-disp-3v3: disabling [ 4.710973] en-mdm-pwr-3v7: disabling [ 4.710975] en-vdd-disp-1v8: disabling [ 4.710977] en-vdd-cam-hv-2v8: disabling [ 4.710980] en-vdd-cam-1v2: disabling [ 4.710982] vdd-fan: disabling [ 4.710984] vdd-3v3: disabling [ 4.710987] en-vdd-vcm-2v8: disabling [ 4.710989] vdd-usb2-5v: disabling [ 4.710991] vdd-sys-bl: disabling [ 4.710994] en-vdd-sys: disabling [ 4.710997] ALSA device list: [ 4.711002] #0: tegra-hda at 0x3518000 irq 383 [ 4.711004] #1: tegra-snd-t186ref-mobile-rt565x [ 5.707541] random: crng init done [ 7.632134] extcon-disp-state external-connection:disp-state: cable 40 state 1 [ 7.640344] Extcon HDMI: HPD enabled [ 7.644964] tegradc 15210000.nvdisplay: hdmi: plugged [ 7.661864] EXT4-fs (mmcblk0p1): 3 orphan inodes deleted [ 7.668351] EXT4-fs (mmcblk0p1): recovery complete [ 7.678353] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.687569] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 7.700258] devtmpfs: mounted [ 7.706461] Freeing unused kernel memory: 8448K [ 7.896518] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.947487] cgroup: cgroup2: unknown option "nsdelegate" [ 7.976922] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 8.004175] systemd[1]: Detected architecture arm64. [ 8.105757] systemd[1]: Set hostname to . [ 8.200089] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 8.218687] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 8.423917] systemd[1]: Reached target Swap. [ 8.435185] systemd[1]: Created slice System Slice. [ 8.444070] systemd[1]: Reached target Slices. [ 8.453993] systemd[1]: Listening on udev Control Socket. [ 8.463178] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.544996] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 8.569978] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.713611] systemd-journald[2217]: Received request to flush runtime journal from PID 1 [ 9.796157] tegra-i2c c240000.i2c: no acknowledge from address 0x69 [ 9.804136] bmi160 1-0069: bmi_i2c_rd ERR: 0x00 [ 9.813091] bmi160 1-0069: bmi_init _id_i2c ERR [ 14.367140] vdd-1v8: voltage operation not allowed [ 14.373434] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 14.399771] vdd-1v8: voltage operation not allowed [ 14.406203] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 14.432646] vdd-1v8: voltage operation not allowed [ 14.438962] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 14.449614] vdd-1v8: voltage operation not allowed [ 14.456473] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 14.570809] vdd-1v8: voltage operation not allowed [ 14.577113] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 14.587999] vdd-1v8: voltage operation not allowed [ 14.594327] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 14.604068] vdd-1v8: voltage operation not allowed [ 14.610396] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [0000.197] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-1b47d5d9) [0000.206] I> bit @ 0xd480000 [0000.208] I> Boot-device: eMMC [0000.212] I> sdmmc bdev is already initialized [0000.217] I> pmic: reset reason (nverc) : 0x40 [0000.224] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0000.231] I> Found 31 partitions in SDMMC_USER (instance 3) [0000.237] I> A/B: bin_type (16) slot 0 [0000.241] I> Loading partition bpmp-fw at 0xd7800000 [0000.246] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.251] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.266] I> Binary(16) of size 532656 is loaded @ 0xd7800000 [0000.272] I> A/B: bin_type (17) slot 0 [0000.276] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.281] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.286] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.300] I> Binary(17) of size 465840 is loaded @ 0xd798e200 [0000.478] I> Loading SCE-FW ... [0000.481] I> A/B: bin_type (12) slot 0 [0000.485] I> Loading partition sce-fw at 0xd7300000 [0000.489] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.495] I> Addr: 0xd7300000, start-block: 58782024, num_blocks: 1 [0000.504] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.510] I> Init SCE [0000.512] I> Loading APE-FW ... [0000.515] I> A/B: bin_type (11) slot 0 [0000.519] I> Loading partition adsp-fw at 0xd7400000 [0000.524] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.529] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.538] I> Binary(11) of size 106240 is loaded @ 0xd7400000 [0000.544] I> Copy BTCM section [0000.547] I> A/B: bin_type (13) slot 0 [0000.551] I> Loading partition cpu-bootloader at 0x96000000 [0000.556] I> Reading two headers - addr:0x96000000 blocks:1 [0000.562] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.573] I> Binary(13) of size 275920 is loaded @ 0x96000000 [0000.579] I> A/B: bin_type (20) slot 0 [0000.582] I> Loading partition bootloader-dtb at 0x8520f400 [0000.588] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.593] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.604] I> Binary(20) of size 256048 is loaded @ 0x8520f400 [0000.610] I> A/B: bin_type (14) slot 0 [0000.614] I> Loading partition secure-os at 0x8530f600 [0000.619] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.624] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.633] I> Binary(14) of size 83360 is loaded @ 0x8530f600 [0000.641] I> boot profiler @ 0x275844000 [0000.645] I> Unhalting SCE [0000.648] I> Primary Memory Start:80000000 Size:70000000 [0000.653] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.660] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):eca0c5e NOTICE: BL31: Built : 00:20:29, Mar 13 2019 ERROR: Error initializing runtime service trusty_fast [0001.018] I> Welcome to Cboot [0001.021] I> Cboot Version: t186-13ef9e7a [0001.025] I> CPU-BL Params @ 0x275800000 [0001.029] I> 0) Base:0x00000000 Size:0x00000000 [0001.033] I> 1) Base:0x277f00000 Size:0x00100000 [0001.038] I> 2) Base:0x277e00000 Size:0x00100000 [0001.042] I> 3) Base:0x277d00000 Size:0x00100000 [0001.047] I> 4) Base:0x277c00000 Size:0x00100000 [0001.051] I> 5) Base:0x277b00000 Size:0x00100000 [0001.056] I> 6) Base:0x277800000 Size:0x00200000 [0001.060] I> 7) Base:0x277400000 Size:0x00400000 [0001.065] I> 8) Base:0x277a00000 Size:0x00100000 [0001.069] I> 9) Base:0x277300000 Size:0x00100000 [0001.074] I> 10) Base:0x276800000 Size:0x00800000 [0001.078] I> 11) Base:0x30000000 Size:0x00040000 [0001.083] I> 12) Base:0xf0000000 Size:0x00100000 [0001.087] I> 13) Base:0x30040000 Size:0x00001000 [0001.092] I> 14) Base:0x30048000 Size:0x00001000 [0001.096] I> 15) Base:0x30049000 Size:0x00001000 [0001.101] I> 16) Base:0x3004a000 Size:0x00001000 [0001.105] I> 17) Base:0x3004b000 Size:0x00001000 [0001.109] I> 18) Base:0x3004c000 Size:0x00001000 [0001.114] I> 19) Base:0x3004d000 Size:0x00001000 [0001.118] I> 20) Base:0x3004e000 Size:0x00001000 [0001.123] I> 21) Base:0x3004f000 Size:0x00001000 [0001.127] I> 22) Base:0x00000000 Size:0x00000000 [0001.132] I> 23) Base:0xf0100000 Size:0x00010000 [0001.136] I> 24) Base:0x00000000 Size:0x00000000 [0001.140] I> 25) Base:0x00000000 Size:0x00000000 [0001.145] I> 26) Base:0x00000000 Size:0x00000000 [0001.149] I> 27) Base:0x00000000 Size:0x00000000 [0001.154] I> 28) Base:0x84400000 Size:0x00400000 [0001.158] I> 29) Base:0x30000000 Size:0x00010000 [0001.163] I> 30) Base:0x278000000 Size:0x08000000 [0001.167] I> 31) Base:0x00000000 Size:0x00000000 [0001.172] I> 32) Base:0x276000000 Size:0x00600000 [0001.176] I> 33) Base:0x80000000 Size:0x70000000 [0001.181] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.185] I> 35) Base:0x00000000 Size:0x00000000 [0001.189] I> 36) Base:0x00000000 Size:0x00000000 [0001.194] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.198] I> 38) Base:0x84000000 Size:0x00400000 [0001.203] I> 39) Base:0x96000000 Size:0x02000000 [0001.207] I> 40) Base:0x85000000 Size:0x01200000 [0001.212] I> 41) Base:0x275800000 Size:0x00500000 [0001.216] I> 42) Base:0x00000000 Size:0x00000000 [0001.221] I> 43) Base:0x00000000 Size:0x00000000 [0001.225] GIC-SPI Target CPU: 4 [0001.228] Interrupts Init done [0001.232] calling constructors [0001.235] initializing heap [0001.237] initializing threads [0001.241] initializing timers [0001.244] creating bootstrap completion thread [0001.248] top of bootstrap2() [0001.252] CPU: ARM Cortex A57 [0001.255] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.260] initializing platform [0001.263] I> Boot-device: eMMC [0001.267] I> sdmmc bdev is already initialized [0001.273] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0001.279] I> Found 31 partitions in SDMMC_USER (instance 3) [0001.285] W> opt-in fuse is not set, skip fuse_burning [0001.290] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.295] W> No valid slot number is found in scratch register [0001.301] W> Return default slot: _a [0001.304] I> A/B: bin_type (21) slot 0 [0001.308] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.321] I> Kernel_dtb @0x80000000 [0001.325] I> Bl_dtb @0x8520f400 [0001.328] I> gpio framework initialized [0001.333] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.342] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.350] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.361] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.368] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.377] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.387] I> fixed regulator driver initialized [0001.415] I> register 'maxim' power off handle [0001.420] I> virtual i2c enabled [0001.423] I> registered 'maxim,max77620' pmic [0001.427] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.438] I> Find /i2c@c250000's alias i2c7 [0001.442] I> Reading eeprom i2c=7 address=0x50 [0001.472] I> Device at /i2c@c250000:0x50 [0001.476] I> Reading eeprom i2c=7 address=0x57 [0001.505] I> Device at /i2c@c250000:0x57 [0001.510] I> Find /i2c@c240000's alias i2c1 [0001.514] I> Reading eeprom i2c=1 address=0x51 [0001.519] E> I2C: slave not found in slaves. [0001.523] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.531] E> I2C_DEV: Failed to send register address 0x00000000. [0001.537] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.546] E> eeprom: Retry to read I2C slave device. [0001.551] E> I2C: slave not found in slaves. [0001.555] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.563] E> I2C_DEV: Failed to send register address 0x00000000. [0001.569] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.578] E> eeprom: Failed to read I2C slave device [0001.583] I> Eeprom read failed 0x3526070d [0001.588] I> Find /i2c@3160000's alias i2c0 [0001.592] I> Reading eeprom i2c=0 address=0x50 [0001.596] E> I2C: slave not found in slaves. [0001.600] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.608] E> I2C_DEV: Failed to send register address 0x00000000. [0001.614] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.623] E> eeprom: Failed to read I2C slave device [0001.628] I> Eeprom read failed 0x3526070d [0001.633] I> Find /i2c@3180000's alias i2c2 [0001.637] I> Reading eeprom i2c=2 address=0x54 [0001.641] I> Enabling gpio chip_id = 2, gpio pin = 9 [1125.528] E> Blob is not set [1126.330] I> Welcome to MB2(TBoot-BPMP) Recovery(version: 01.00.160913-t186-M-00.00-mobile-65342981) [1126.339] I> bit @ 0xd480000 [1126.342] I> Boot-device: eMMC [1126.367] I> sdmmc DDR50 mode [1126.370] I> sdmmc bdev is already initialized [1126.375] I> pmic: reset reason (nverc) : 0x80 [1126.382] I> Found 16 partitions in SDMMC_BOOT (instance 3) [1126.389] I> Found 31 partitions in SDMMC_USER (instance 3) [1126.398] I> Binary(16) of size 532656 is loaded @ 0xd7800000 [1126.406] I> Binary(17) of size 465840 is loaded @ 0xd798e440 [1126.584] I> Copy BTCM section [1126.588] I> Binary(13) of size 202432 is loaded @ 0x96000000 [1126.595] I> Binary(20) of size 256048 is loaded @ 0x8520f400 [1126.602] I> Binary(14) of size 83360 is loaded @ 0x8530f600 [1126.610] I> boot profiler @ 0x275844000 [1126.614] I> Unhalting SCE [1126.617] I> Primary Memory Start:80000000 Size:70000000 [1126.622] I> Extended Memory Start:f0110000 Size:1856f0000 [1126.629] I> MB2(TBoot-BPMP) Recovery done NOTICE: BL31: v1.3(release):eca0c5e NOTICE: BL31: Built : 00:20:29, Mar 13 2019 ERROR: Error initializing runtime service trusty_fast [1126.988] I> Welcome to TBoot-CPU Recovery(version: 01.00.160913-t186-M-00.00-mobile-44236992) [1126.996] I> gpio framework initialized [1127.000] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [1127.007] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [1127.015] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [1127.024] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [1127.031] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [1127.039] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [1127.046] I> CPU: ARM Cortex A57 [1127.050] I> CPU: MIDR: 0x411fd073, MPIDR: 0x80000100 [1127.054] I> L2 ECC enabled : yes [1127.058] I> CPU-BL Params @ 0x275800000 [1127.061] I> 0) Base:0x00000000 Size:0x00000000 [1127.066] I> 1) Base:0x277f00000 Size:0x00100000 [1127.070] I> 2) Base:0x277e00000 Size:0x00100000 [1127.075] I> 3) Base:0x277d00000 Size:0x00100000 [1127.079] I> 4) Base:0x277c00000 Size:0x00100000 [1127.084] I> 5) Base:0x277b00000 Size:0x00100000 [1127.088] I> 6) Base:0x277800000 Size:0x00200000 [1127.093] I> 7) Base:0x277400000 Size:0x00400000 [1127.097] I> 8) Base:0x277a00000 Size:0x00100000 [1127.102] I> 9) Base:0x277300000 Size:0x00100000 [1127.106] I> 10) Base:0x276800000 Size:0x00800000 [1127.111] I> 11) Base:0x30000000 Size:0x00040000 [1127.115] I> 12) Base:0xf0000000 Size:0x00100000 [1127.120] I> 13) Base:0x30040000 Size:0x00001000 [1127.124] I> 14) Base:0x30048000 Size:0x00001000 [1127.129] I> 15) Base:0x30049000 Size:0x00001000 [1127.133] I> 16) Base:0x3004a000 Size:0x00001000 [1127.138] I> 17) Base:0x3004b000 Size:0x00001000 [1127.142] I> 18) Base:0x3004c000 Size:0x00001000 [1127.146] I> 19) Base:0x3004d000 Size:0x00001000 [1127.151] I> 20) Base:0x3004e000 Size:0x00001000 [1127.155] I> 21) Base:0x3004f000 Size:0x00001000 [1127.160] I> 22) Base:0x00000000 Size:0x00000000 [1127.164] I> 23) Base:0xf0100000 Size:0x00010000 [1127.169] I> 24) Base:0x00000000 Size:0x00000000 [1127.173] I> 25) Base:0x00000000 Size:0x00000000 [1127.177] I> 26) Base:0x00000000 Size:0x00000000 [1127.182] I> 27) Base:0x00000000 Size:0x00000000 [1127.186] I> 28) Base:0x84400000 Size:0x00400000 [1127.191] I> 29) Base:0x30000000 Size:0x00010000 [1127.195] I> 30) Base:0x278000000 Size:0x08000000 [1127.200] I> 31) Base:0x00000000 Size:0x00000000 [1127.204] I> 32) Base:0x276000000 Size:0x00600000 [1127.209] I> 33) Base:0x80000000 Size:0x70000000 [1127.213] I> 34) Base:0xf0110000 Size:0x1856f0000 [1127.218] I> 35) Base:0x00000000 Size:0x00000000 [1127.222] I> 36) Base:0x00000000 Size:0x00000000 [1127.226] I> 37) Base:0x2772e0000 Size:0x00020000 [1127.231] I> 38) Base:0x84000000 Size:0x00400000 [1127.235] I> 39) Base:0x96000000 Size:0x02000000 [1127.240] I> 40) Base:0x85000000 Size:0x01200000 [1127.244] I> 41) Base:0x275800000 Size:0x00500000 [1127.249] I> 42) Base:0x00000000 Size:0x00000000 [1127.253] I> 43) Base:0x00000000 Size:0x00000000 [1127.258] I> Boot-device: eMMC [1127.283] I> sdmmc DDR50 mode [1127.286] I> sdmmc bdev is already initialized [1127.292] I> Found 16 partitions in SDMMC_BOOT (instance 3) [1127.299] I> Found 31 partitions in SDMMC_USER (instance 3) [1127.304] I> bl dtb load address = @0x8520f400 [1127.308] I> Recovery boot_type: 0 [1127.314] I> fixed regulator driver initialized [1127.350] I> register 'maxim' power off handle [1127.356] I> virtual i2c enabled [1127.359] I> registered 'maxim,max77620' pmic [1127.363] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [1127.370] I> Entering 3p server [1127.373] I> SUPER SPEED [1127.894] I> USB configuration success [1128.177] I> Writing kernel-dtb partition. [1128.318] I> Rebooting : reset-coldboot [0000.194] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-1b47d5d9) [0000.203] I> bit @ 0xd480000 [0000.206] I> Boot-device: eMMC [0000.209] I> sdmmc bdev is already initialized [0000.214] I> pmic: reset reason (nverc) : 0x0 [0000.221] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0000.228] I> Found 31 partitions in SDMMC_USER (instance 3) [0000.234] I> A/B: bin_type (16) slot 0 [0000.238] I> Loading partition bpmp-fw at 0xd7800000 [0000.243] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.248] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.263] I> Binary(16) of size 532656 is loaded @ 0xd7800000 [0000.269] I> A/B: bin_type (17) slot 0 [0000.273] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.278] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.283] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.297] I> Binary(17) of size 465840 is loaded @ 0xd798e200 [0000.475] I> Loading SCE-FW ... [0000.478] I> A/B: bin_type (12) slot 0 [0000.482] I> Loading partition sce-fw at 0xd7300000 [0000.486] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.492] I> Addr: 0xd7300000, start-block: 58782024, num_blocks: 1 [0000.501] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.507] I> Init SCE [0000.509] I> Loading APE-FW ... [0000.512] I> A/B: bin_type (11) slot 0 [0000.516] I> Loading partition adsp-fw at 0xd7400000 [0000.521] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.526] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.535] I> Binary(11) of size 106240 is loaded @ 0xd7400000 [0000.541] I> Copy BTCM section [0000.544] I> A/B: bin_type (13) slot 0 [0000.548] I> Loading partition cpu-bootloader at 0x96000000 [0000.553] I> Reading two headers - addr:0x96000000 blocks:1 [0000.559] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.570] I> Binary(13) of size 275920 is loaded @ 0x96000000 [0000.576] I> A/B: bin_type (20) slot 0 [0000.579] I> Loading partition bootloader-dtb at 0x8520f400 [0000.585] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.590] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.601] I> Binary(20) of size 256048 is loaded @ 0x8520f400 [0000.607] I> A/B: bin_type (14) slot 0 [0000.611] I> Loading partition secure-os at 0x8530f600 [0000.616] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.621] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.630] I> Binary(14) of size 83360 is loaded @ 0x8530f600 [0000.638] I> boot profiler @ 0x275844000 [0000.642] I> Unhalting SCE [0000.645] I> Primary Memory Start:80000000 Size:70000000 [0000.650] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.657] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):eca0c5e NOTICE: BL31: Built : 00:20:29, Mar 13 2019 ERROR: Error initializing runtime service trusty_fast [0001.015] I> Welcome to Cboot [0001.018] I> Cboot Version: t186-13ef9e7a [0001.022] I> CPU-BL Params @ 0x275800000 [0001.026] I> 0) Base:0x00000000 Size:0x00000000 [0001.030] I> 1) Base:0x277f00000 Size:0x00100000 [0001.035] I> 2) Base:0x277e00000 Size:0x00100000 [0001.039] I> 3) Base:0x277d00000 Size:0x00100000 [0001.044] I> 4) Base:0x277c00000 Size:0x00100000 [0001.048] I> 5) Base:0x277b00000 Size:0x00100000 [0001.053] I> 6) Base:0x277800000 Size:0x00200000 [0001.057] I> 7) Base:0x277400000 Size:0x00400000 [0001.062] I> 8) Base:0x277a00000 Size:0x00100000 [0001.066] I> 9) Base:0x277300000 Size:0x00100000 [0001.071] I> 10) Base:0x276800000 Size:0x00800000 [0001.075] I> 11) Base:0x30000000 Size:0x00040000 [0001.080] I> 12) Base:0xf0000000 Size:0x00100000 [0001.084] I> 13) Base:0x30040000 Size:0x00001000 [0001.089] I> 14) Base:0x30048000 Size:0x00001000 [0001.093] I> 15) Base:0x30049000 Size:0x00001000 [0001.097] I> 16) Base:0x3004a000 Size:0x00001000 [0001.102] I> 17) Base:0x3004b000 Size:0x00001000 [0001.106] I> 18) Base:0x3004c000 Size:0x00001000 [0001.111] I> 19) Base:0x3004d000 Size:0x00001000 [0001.115] I> 20) Base:0x3004e000 Size:0x00001000 [0001.120] I> 21) Base:0x3004f000 Size:0x00001000 [0001.124] I> 22) Base:0x00000000 Size:0x00000000 [0001.128] I> 23) Base:0xf0100000 Size:0x00010000 [0001.133] I> 24) Base:0x00000000 Size:0x00000000 [0001.137] I> 25) Base:0x00000000 Size:0x00000000 [0001.142] I> 26) Base:0x00000000 Size:0x00000000 [0001.146] I> 27) Base:0x00000000 Size:0x00000000 [0001.151] I> 28) Base:0x84400000 Size:0x00400000 [0001.155] I> 29) Base:0x30000000 Size:0x00010000 [0001.159] I> 30) Base:0x278000000 Size:0x08000000 [0001.164] I> 31) Base:0x00000000 Size:0x00000000 [0001.168] I> 32) Base:0x276000000 Size:0x00600000 [0001.173] I> 33) Base:0x80000000 Size:0x70000000 [0001.177] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.182] I> 35) Base:0x00000000 Size:0x00000000 [0001.186] I> 36) Base:0x00000000 Size:0x00000000 [0001.191] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.195] I> 38) Base:0x84000000 Size:0x00400000 [0001.200] I> 39) Base:0x96000000 Size:0x02000000 [0001.204] I> 40) Base:0x85000000 Size:0x01200000 [0001.209] I> 41) Base:0x275800000 Size:0x00500000 [0001.213] I> 42) Base:0x00000000 Size:0x00000000 [0001.217] I> 43) Base:0x00000000 Size:0x00000000 [0001.222] GIC-SPI Target CPU: 4 [0001.225] Interrupts Init done [0001.228] calling constructors [0001.232] initializing heap [0001.234] initializing threads [0001.237] initializing timers [0001.241] creating bootstrap completion thread [0001.245] top of bootstrap2() [0001.248] CPU: ARM Cortex A57 [0001.252] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.257] initializing platform [0001.260] I> Boot-device: eMMC [0001.264] I> sdmmc bdev is already initialized [0001.270] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0001.276] I> Found 31 partitions in SDMMC_USER (instance 3) [0001.281] W> opt-in fuse is not set, skip fuse_burning [0001.286] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.292] W> No valid slot number is found in scratch register [0001.298] W> Return default slot: _a [0001.301] I> A/B: bin_type (21) slot 0 [0001.305] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.318] I> Kernel_dtb @0x80000000 [0001.321] I> Bl_dtb @0x8520f400 [0001.324] I> gpio framework initialized [0001.330] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.339] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.347] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.358] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.365] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.374] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.383] I> fixed regulator driver initialized [0001.411] I> register 'maxim' power off handle [0001.417] I> virtual i2c enabled [0001.420] I> registered 'maxim,max77620' pmic [0001.424] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.435] I> Find /i2c@c250000's alias i2c7 [0001.439] I> Reading eeprom i2c=7 address=0x50 [0001.469] I> Device at /i2c@c250000:0x50 [0001.473] I> Reading eeprom i2c=7 address=0x57 [0001.502] I> Device at /i2c@c250000:0x57 [0001.507] I> Find /i2c@c240000's alias i2c1 [0001.511] I> Reading eeprom i2c=1 address=0x51 [0001.516] E> I2C: slave not found in slaves. [0001.520] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.528] E> I2C_DEV: Failed to send register address 0x00000000. [0001.534] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.543] E> eeprom: Retry to read I2C slave device. [0001.548] E> I2C: slave not found in slaves. [0001.552] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.560] E> I2C_DEV: Failed to send register address 0x00000000. [0001.566] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.575] E> eeprom: Failed to read I2C slave device [0001.580] I> Eeprom read failed 0x3526070d [0001.585] I> Find /i2c@3160000's alias i2c0 [0001.589] I> Reading eeprom i2c=0 address=0x50 [0001.593] E> I2C: slave not found in slaves. [0001.597] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.605] E> I2C_DEV: Failed to send register address 0x00000000. [0001.611] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.620] E> eeprom: Failed to read I2C slave device [0001.625] I> Eeprom read failed 0x3526070d [0001.630] I> Find /i2c@3180000's alias i2c2 [0001.634] I> Reading eeprom i2c=2 address=0x54 [0001.638] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.669] I> Disabling gpio chip_id = 2, gpio pin = 9 [0001.675] I> Device at /i2c@3180000:0x54 [0001.678] I> create_pm_ids: id: 3310-1000-B02-E, len: 15 [0001.684] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.694] I> create_pm_ids: id: 2597-0000-501-D, len: 15 [0001.700] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.711] I> create_pm_ids: id: 3326-1000-100-M, len: 15 [0001.716] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0001.747] I> hdmi cable connected [0001.752] I> setting 'vdd-pex-1v00' regulator to 1000000 micro volts [0001.761] I> setting 'vdd-1v8' regulator to 1800000 micro volts [0001.769] E> cannot find any other nvdisp nodes [0001.783] E> I2C: Timeout while polling for transfer complete. Last value 0x00000002. [0001.791] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.801] E> I2C: Timeout while polling for bus clear. Last value 0x00000000. [0001.808] E> I2C: Failed to clear bus for instance 3. [0001.813] E> I2C_DEV: Failed to send register address 0x00000000. [0001.819] E> I2C_DEV: Could not read 128 registers of size 1 from slave 0xa0 at 0x00000000 via instance 3. [0001.829] E> could not read edid [0001.836] I> hdmi_enable, starting HDMI initialisation [0001.843] I> hdmi_enable, HDMI initialisation complete [0001.856] initializing target [0001.859] calling apps_init() [0001.862] starting app kernel_boot_app [0001.868] I> found decompressor handler: lz4-legacy [0001.873] I> decompressing BMP blob ... [0001.883] I> Kernel type = Normal [0001.886] I> Loading kernel/boot.img from built-in storage ... [0001.892] W> No valid slot number is found in scratch register [0001.897] W> Return default slot: _a [0001.901] I> A/B: bin_type (24) slot 0 [0002.660] I> Boot image size read from image header: f20d0 [0002.666] I> Boot image load address: 0x0x80400000 [0002.670] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.432] I> Kernel hdr @0x80400000 [0003.435] I> Kernel dtb @0x80000000 [0003.439] I> T18x: Authenticate boot.img (bin_type 24), max size 0x4000000 [0003.446] I> T18x: Authenticate tegra194-p2888-0001-p2822-0000.dtb (bin_type 21), max size 0x100000 [0003.456] I> Checking boot.img header magic ... [0003.460] I> [OK] [0003.462] I> Valid boot.img @ 0x80400000 [0003.466] I> decompressor handler not found [0003.470] I> Copying kernel image (474242 bytes) from 0x80400800 to 0x84600000 ... [0003.477] I> Done [0003.479] I> Move ramdisk (len: 0) from 0x80474800 to 0x98730000 [0003.486] I> Updated bpmp info to DTB [0003.491] I> Ramdisk: Base: 0x98730000; Size: 0x0 [0003.495] I> Updated initrd info to DTB [0003.499] W> WARN: Fail to override "console=none" in commandline [0003.505] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.512] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.519] I> disabled_core_mask: 0xffffff0c [0003.523] W> No valid slot number is found in scratch register [0003.529] W> Return default slot: _a [0003.533] I> Active slot suffix: [0003.536] I> add_boot_slot_suffix: slot_suffix = [0003.540] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607b000 lut_mem2=0x2008@0x96078000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.983055.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0003.580] I> Updated bootarg info to DTB [0003.584] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:c4:e8:15 [0003.590] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:c4:e8:16 [0003.597] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:c4:e8:17 [0003.604] E> Found no plugin manager ids in source DT [0003.609] W> Add plugin manager ids from board info [0003.614] E> "plugin-manager" doesn't exist, creating [0003.618] E> "ids" doesn't exist, creating [0003.622] E> "connection" doesn't exist, creating [0003.627] E> "configs" doesn't exist, creating [0003.631] I> create_pm_ids: id: 3310-1000-B02-E, len: 15 [0003.636] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.647] I> create_pm_ids: id: 2597-0000-501-D, len: 15 [0003.653] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.663] I> create_pm_ids: id: 3326-1000-100-M, len: 15 [0003.669] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0003.680] I> Adding plugin-manager/ids/3310-1000-B02=/i2c@c250000:module@0x50 [0003.687] E> "i2c@c250000" doesn't exist, creating [0003.691] E> "module@0x50" doesn't exist, creating [0003.696] I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57 [0003.703] E> "module@0x57" doesn't exist, creating [0003.708] I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54 [0003.716] E> "i2c@3180000" doesn't exist, creating [0003.720] E> "module@0x54" doesn't exist, creating [0003.726] I> Adding plugin-manager/ids/3310-1000-B02-E [0003.733] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.738] I> Adding plugin-manager/configs/3310-power-config 00 [0003.744] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.750] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.756] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.762] I> Adding plugin-manager/configs/3310-display-config 00 [0003.768] I> Adding plugin-manager/cvm [0003.772] E> "chip-id" doesn't exist, creating [0003.776] I> Adding plugin-manager/chip-id/A02P [0003.781] E> "odm-data" doesn't exist, creating [0003.785] I> Adding /chosen/plugin-manager/odm-data [0003.794] I> added [base:0x80000000, size:0x70000000] to /memory [0003.800] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.806] I> added [base:0x275e00000, size:0x200000] to /memory [0003.811] I> added [base:0x276600000, size:0x200000] to /memory [0003.817] I> added [base:0x277000000, size:0x200000] to /memory [0003.823] I> Updated memory info to DTB [0003.827] E> add_disp_param: failed to get display params for du=1 [0003.834] E> "reset" doesn't exist, creating [0003.839] E> "pmc-reset-reason" doesn't exist, creating [0003.844] E> "pmic-reset-reason" doesn't exist, creating [0003.850] I> Adding ecid(00000001644007480400000003060200) to DT [0003.856] I> disabled_core_mask: 0xffffff0c [0003.865] I> Add serial number:0422618029351 as DT property [0003.873] I> Plugin-manager override starting [0003.879] I> node /plugin-manager/fragement@0 matches [0003.887] I> node /plugin-manager/fragement@4 matches [0003.898] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.914] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.922] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.931] I> node /plugin-manager/fragment-devslp@0 matches [0003.943] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.954] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.963] I> node /plugin-manager/fragment-p3310-c01 matches [0003.972] I> node /plugin-manager/fragment-p3310-c03 matches [0003.993] I> Disable plugin-manager status in FDT [0003.998] I> Plugin-manager override finished successfully [0004.003] I> tegrabl_load_kernel_and_dtb: Done [0004.007] I> Sending TOS params [0004.010] I> Sending NS DRAM Ranges to TOS [0004.014] W> Failed to send NS DRAM Ranges to TOS [0004.019] W> Failed to lock interface between BL and TOS [0004.065] I> Kernel EP: 0x84600000, DTB: 0x80000000 U-Boot 2016.07-g0eb73f4 (Mar 13 2019 - 00:20:34 -0700) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 213 bytes read in 181 ms (1000 Bytes/s) p2771-0000 eMMC boot options 1: primary kernel Enter choice: 1: primary kernel Retrieving file: /boot/Image 33773576 bytes read in 848 ms (38 MiB/s) append: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607b000 lut_mem2=0x2008@0x96078000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.983055.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000080000000, end 00000000800437c4 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140+ (root@ARV-118) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #8 SMP PREEMPT Fri Apr 5 13:56:41 CEST 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@9607b000 [ 0.000000] Found lut_mem2: 00002008@96078000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc1f7023000 s53400 r8192 d32616 u94208 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2020917 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607b000 lut_mem2=0x2008@0x96078000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.983055.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29512(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7967496K/8212468K available (15038K kernel code, 2838K rwdata, 6612K rodata, 8448K init, 605K bss, 179436K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f30000 ( 15040 KB) [ 0.000000] .rodata : 0xffffff8008f30000 - 0xffffff80095b0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095b0000 - 0xffffff8009df0000 ( 8448 KB) [ 0.000000] .data : 0xffffff8009df0000 - 0xffffff800a0b5808 ( 2839 KB) [ 0.000000] .bss : 0xffffff800a0b5808 - 0xffffff800a14cdfc ( 606 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009437] Console: colour dummy device 80x25 [ 0.014101] console [tty0] enabled [ 0.017657] bootconsole [uart8250] disabled [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140+ (root@ARV-118) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #8 SMP PREEMPT Fri Apr 5 13:56:41 CEST 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@9607b000 [ 0.000000] Found lut_mem2: 00002008@96078000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc1f7023000 s53400 r8192 d32616 u94208 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2020917 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607b000 lut_mem2=0x2008@0x96078000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.983055.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29512(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7967496K/8212468K available (15038K kernel code, 2838K rwdata, 6612K rodata, 8448K init, 605K bss, 179436K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f30000 ( 15040 KB) [ 0.000000] .rodata : 0xffffff8008f30000 - 0xffffff80095b0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095b0000 - 0xffffff8009df0000 ( 8448 KB) [ 0.000000] .data : 0xffffff8009df0000 - 0xffffff800a0b5808 ( 2839 KB) [ 0.000000] .bss : 0xffffff800a0b5808 - 0xffffff800a14cdfc ( 606 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009437] Console: colour dummy device 80x25 [ 0.014101] console [tty0] enabled [ 0.017657] bootconsole [uart8250] disabled [ 0.022032] kmemleak: Kernel memory leak detector disabled [ 0.022048] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022061] pid_max: default: 32768 minimum: 301 [ 0.022370] Security Framework initialized [ 0.022530] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022540] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023153] ftrace: allocating 46511 entries in 182 pages [ 0.145170] sched-energy: Sched-energy-costs installed from DT [ 0.145189] ASID allocator initialised with 65536 entries [ 0.181812] tegra-id: chipid=21817. [ 0.181827] tegra-id: opt_subrevision=1. [ 0.181848] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.181861] DTS File Name: /home/gertjan/nvidia/nvidia_sdk/JetPack_4.2_Linux_P3310/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.181879] DTB Build time: Apr 8 2019 16:55:49 [ 0.229844] CPU1: Booted secondary processor [4e0f0030] [ 0.261517] CPU2: Booted secondary processor [4e0f0030] [ 0.293365] CPU3: Booted secondary processor [411fd073] [ 0.325351] CPU4: Booted secondary processor [411fd073] [ 0.357353] CPU5: Booted secondary processor [411fd073] [ 0.357408] Brought up 6 CPUs [ 0.357456] SMP: Total of 6 processors activated. [ 0.357469] CPU features: detected feature: 32-bit EL0 Support [ 0.358273] CPU: All CPU(s) started at EL2 [ 0.358325] alternatives: patching kernel code [ 0.367685] devtmpfs: initialized [ 0.394156] Initilizing CustomIPI irq domain [ 0.394363] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.394389] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.395242] pinctrl core: initialized pinctrl subsystem [ 0.395446] OS set in device tree is not L4T. [ 0.395612] regulator-dummy: no parameters [ 0.395769] Initializing plugin-manager [ 0.395832] Plugin module not found [ 0.395876] Plugin-manager status disabled [ 0.397178] NET: Registered protocol family 16 [ 0.397884] pstore: using zlib compression [ 0.398268] console [pstore-1] enabled [ 0.398280] pstore: Registered ramoops as persistent store backend [ 0.398293] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.416993] cpuidle: using governor menu [ 0.418107] bpmp: waiting for handshake [ 0.418123] bpmp: handshake completed [ 0.418146] bpmp: synchronizing channels [ 0.418161] bpmp: channels synchronized [ 0.418173] bpmp: mail init ok [ 0.419941] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.419960] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.419974] arm-smmu 12000000.iommu: stage 1 translation [ 0.419987] arm-smmu 12000000.iommu: stage 2 translation [ 0.419999] arm-smmu 12000000.iommu: nested translation [ 0.420014] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.420034] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.420053] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.420067] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.420080] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.421858] vdso: 2 pages (1 code @ ffffff8008f37000, 1 data @ ffffff8009df4000) [ 0.421887] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.423069] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.424136] Registering BPMP clocks... [ 0.424234] tegra_bpmp_clk_init: clock init ok (636 clks) [ 0.424582] tegra_bpmp_of_clk_init: EMC proxy not found. [ 0.426064] tegra_powergate_init: DONE [ 0.426083] DTS File Name: /home/gertjan/nvidia/nvidia_sdk/JetPack_4.2_Linux_P3310/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.426114] DTB Build time: Apr 8 2019 16:55:49 [ 0.427461] Tegra reboot handler registered. [ 0.428701] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.428776] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.428799] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.428811] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.428822] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.429008] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.429035] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.429349] iommu: Adding device 3460000.sdhci to group 0 [ 0.430004] iommu: Adding device 3400000.sdhci to group 1 [ 0.431052] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.431077] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.431503] iommu: Adding device 3160000.i2c to group 3 [ 0.431924] iommu: Adding device c240000.i2c to group 4 [ 0.432261] iommu: Adding device 3180000.i2c to group 5 [ 0.432586] iommu: Adding device 3190000.i2c to group 6 [ 0.433025] iommu: Adding device 31b0000.i2c to group 7 [ 0.433355] iommu: Adding device 31c0000.i2c to group 8 [ 0.433683] iommu: Adding device c250000.i2c to group 9 [ 0.434009] iommu: Adding device 31e0000.i2c to group 10 [ 0.435468] iommu: Adding device 3210000.spi to group 11 [ 0.435800] iommu: Adding device c260000.spi to group 12 [ 0.436119] iommu: Adding device 3240000.spi to group 13 [ 0.436792] iommu: Adding device 3100000.serial to group 14 [ 0.437146] iommu: Adding device 3110000.serial to group 15 [ 0.437472] iommu: Adding device c280000.serial to group 16 [ 0.437796] iommu: Adding device 3130000.serial to group 17 [ 0.439063] iommu: Adding device 2490000.ether_qos to group 18 [ 0.439086] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.439665] iommu: Adding device b000000.rtcpu to group 19 [ 0.441726] iommu: Adding device 13e10000.host1x to group 20 [ 0.442040] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.442344] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.442661] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.442960] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.443256] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.443555] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.443867] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.444175] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.444624] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.445274] iommu: Adding device 15700000.vi to group 30 [ 0.445623] iommu: Adding device 15600000.isp to group 31 [ 0.446071] iommu: Adding device 15210000.nvdisplay to group 32 [ 0.446182] platform 15210000.nvdisplay: OF IOVA linear map 0x9607b000 size (0x800000) [ 0.446230] platform 15210000.nvdisplay: OF IOVA linear map 0x96078000 size (0x2008) [ 0.446718] iommu: Adding device 15340000.vic to group 33 [ 0.446941] iommu: Adding device 154c0000.nvenc to group 34 [ 0.447158] iommu: Adding device 15480000.nvdec to group 35 [ 0.447494] iommu: Adding device 15380000.nvjpg to group 36 [ 0.447728] iommu: Adding device 15500000.tsec to group 37 [ 0.447942] iommu: Adding device 15100000.tsecb to group 38 [ 0.448585] iommu: Adding device 15810000.se to group 39 [ 0.448803] iommu: Adding device 15820000.se to group 40 [ 0.449039] iommu: Adding device 15830000.se to group 41 [ 0.449256] iommu: Adding device 15840000.se to group 42 [ 0.450093] iommu: Adding device smmu_test to group 43 [ 0.450681] mc: mapped MMIO address: 0xffffff800a640000 -> 0x2c10000 [ 0.450707] mc: mapped MMIO address: 0xffffff800a660000 -> 0x2c20000 [ 0.450727] mc: mapped MMIO address: 0xffffff800a680000 -> 0x2c30000 [ 0.450747] mc: mapped MMIO address: 0xffffff800a6a0000 -> 0x2c40000 [ 0.450766] mc: mapped MMIO address: 0xffffff800a6c0000 -> 0x2c50000 [ 0.450784] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.450805] mc-err: mcerr ops are set to t18x [ 0.450952] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.451989] iommu: Adding device 3530000.xhci to group 44 [ 0.452011] arm-smmu: forcing sodev map for 3530000.xhci [ 0.452433] iommu: Adding device 3550000.xudc to group 45 [ 0.452457] arm-smmu: forcing sodev map for 3550000.xudc [ 0.453198] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.453218] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.453765] iommu: Adding device 17000000.gp10b to group 46 [ 0.454762] tegra-reset 5000000.clock: registered 193 resets. [ 0.456826] iommu: Adding device d000000.bpmp to group 47 [ 0.457072] bpmp: ping status is 0 [ 0.457171] bpmp d000000.bpmp: firmware tag is 69fa4e41a01fc02a4db1adf71922a54c [ 0.459196] bpmp d000000.bpmp: probe ok [ 0.462133] iommu: Adding device 2600000.dma to group 48 [ 0.463320] GPIO line 424 (wifi-enable) hogged as output/high [ 0.463359] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.463392] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.463593] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.467273] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.467447] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.469019] iommu: Adding device 10003000.pcie-controller to group 49 [ 0.469046] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.469367] iommu: Adding device sound to group 50 [ 0.469714] iommu: Adding device 3510000.hda to group 51 [ 0.477148] iommu: Adding device c1a0000.aon to group 52 [ 0.477602] vdd-ac-bat: 5000 mV [ 0.479257] vdd-1v8-ap: 1800 mV [ 0.510582] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.516468] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.517052] SCSI subsystem initialized [ 0.517539] random: fast init done [ 0.521956] usbcore: registered new interface driver usbfs [ 0.522037] usbcore: registered new interface driver hub [ 0.522168] usbcore: registered new device driver usb [ 0.525857] GPIO line 241 (touch-rails) hogged as output/high [ 0.526144] GPIO line 242 (touch-rails) hogged as output/high [ 0.526495] gpiochip_setup_dev: registered GPIOs 240 to 255 on device: gpiochip2 (tca9539) [ 0.527564] GPIO line 228 (lcd-bias-rails) hogged as output/high [ 0.527821] gpiochip_setup_dev: registered GPIOs 224 to 239 on device: gpiochip3 (tca9539) [ 0.537346] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.541517] vddio-ddr: at 1125 mV [ 0.545395] avdd_dsi_csi: 1200 mV [ 0.549364] vdd-1v8: 1800 mV [ 0.553368] vdd-3v3-sys: 3300 mV [ 0.554460] spmic-ldo0: at 1800 mV [ 0.555155] spmic-ldo1: at 800 mV [ 0.557365] vddio-3v3: 3300 mV [ 0.557959] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.561366] vdd-rtc: at 800 mV [ 0.562119] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.565365] spmic-ldo6: at 1500 mV [ 0.569367] vdd-pex-1v00: 1000 mV [ 0.570010] dvdd-pex: 1000 mV [ 0.570469] GPIO line 221 (spmic_gpio_input) hogged as input [ 0.570632] GPIO line 222 (spmic_gpio_input) hogged as input [ 0.570846] gpiochip_setup_dev: registered GPIOs 216 to 223 on device: gpiochip4 (max77620-gpio) [ 0.573236] max77620 4-003c: max77620 probe successful [ 0.573852] media: Linux media interface: v0.10 [ 0.573934] Linux video capture interface: v2.00 [ 0.577082] pps_core: LinuxPPS API ver. 1 registered [ 0.577115] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.577253] PTP clock support registered [ 0.578040] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.578116] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.581097] tegra_fiq_debugger_init: found FIQ source (IRQ 386) [ 0.585630] Advanced Linux Sound Architecture Driver Initialized. [ 0.586400] Bluetooth: Core ver 2.22 [ 0.586514] NET: Registered protocol family 31 [ 0.586543] Bluetooth: HCI device and connection manager initialized [ 0.586579] Bluetooth: HCI socket layer initialized [ 0.586630] Bluetooth: L2CAP socket layer initialized [ 0.586681] Bluetooth: SCO socket layer initialized [ 0.587708] en-vdd-sd: 3300 mV [ 0.588398] en-vdd-cam: 1800 mV [ 0.593547] vdd-hdmi: 5000 mV [ 0.593994] vdd-usb0-5v: 5000 mV [ 0.594386] vdd-usb1-5v: 5000 mV [ 0.597549] en-vdd-ts-1v8: 1800 mV [ 0.601548] en-vdd-ts-hv-3v3: 3300 mV [ 0.602276] en-vdd-disp-3v3: 3300 mV [ 0.603021] en-mdm-pwr-3v7: 3700 mV [ 0.603764] en-vdd-disp-1v8: 1800 mV [ 0.604529] en-vdd-cam-hv-2v8: 2800 mV [ 0.605218] en-vdd-cam-1v2: 1200 mV [ 0.605934] vdd-fan: 5000 mV [ 0.606281] vdd-3v3: 3300 mV [ 0.607050] dis-vdd-1v2: 1200 mV [ 0.607432] en-vdd-vcm-2v8: 2800 mV [ 0.608157] vdd-usb2-5v: 5000 mV [ 0.608484] vdd-sys-bl: 3300 mV [ 0.609138] en-vdd-sys: 1200 mV [ 0.611973] camchar: rtcpu character device driver loaded [ 0.612661] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.614642] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.616168] clocksource: Switched to clocksource arch_sys_counter [ 0.655145] VFS: Disk quotas dquot_6.6.0 [ 0.655389] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.656020] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.656931] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.656972] nvmap_page_pool_init: Total RAM pages: 2008258 [ 0.657003] nvmap_page_pool_init: nvmap page pool size: 251032 pages (980 MB) [ 0.657175] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.661124] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.673456] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.673721] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.674173] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.674308] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.674483] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.674677] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.675335] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.675613] la/ptsa driver initialized. [ 0.675648] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.675676] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.676882] NET: Registered protocol family 2 [ 0.678902] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.679553] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.680427] TCP: Hash tables configured (established 65536 bind 65536) [ 0.680534] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.680784] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.681642] NET: Registered protocol family 1 [ 0.682737] RPC: Registered named UNIX socket transport module. [ 0.682771] RPC: Registered udp transport module. [ 0.682797] RPC: Registered tcp transport module. [ 0.682822] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.683086] Trying to unpack rootfs image as initramfs... [ 0.705687] host1x 13e10000.host1x: initialized [ 0.707886] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.713016] audit: initializing netlink subsys (disabled) [ 0.713084] audit: type=2000 audit(0.600:1): initialized [ 0.714003] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.728432] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.731224] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.732925] 9p: Installing v9fs 9p2000 file system support [ 0.738563] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.738744] io scheduler noop registered [ 0.739401] io scheduler cfq registered (default) [ 0.744512] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.807737] iommu: Adding device aconnect@2a41000:adsp_audio to group 53 [ 0.847801] iommu: Adding device 2993000.adsp to group 54 [ 0.849032] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.852650] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 0.856770] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.858355] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.859771] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.861180] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.863897] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 0.865007] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.865443] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 0.865745] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.866021] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1000000, vi_iso_bw=4500000, max_bw=4500000 [ 0.867948] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.869268] tsec 15500000.tsec: initialized [ 0.870369] tsec 15100000.tsecb: initialized [ 0.873068] nvdec 15480000.nvdec: initialized [ 0.877925] falcon 15340000.vic: initialized [ 0.879537] falcon 154c0000.nvenc: initialized [ 0.880998] falcon 15380000.nvjpg: initialized [ 0.882909] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.884388] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.885801] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.887221] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.888652] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.890072] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.891488] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.892924] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.895560] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.895583] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.895619] tegradccommon 15200000.dc_common: dma mapping done [ 0.896610] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 0.896695] generic_infoframe_type: 0x87 [ 0.896824] tegradc 15210000.nvdisplay: DT parsed successfully [ 0.896852] tegradc 15210000.nvdisplay: Display dc.ffffff800b610000 registered with id=0 [ 0.904648] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.904695] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.904752] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.905117] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 0.905148] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 0.906669] tegradc 15210000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 0.907969] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 10 channels [ 0.908841] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.909506] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 0.909531] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 0.909615] kfuse 3830000.kfuse: initialized [ 0.911858] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.912931] tegradc 15210000.nvdisplay: probed [ 0.920707] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.923898] console [ttyS0] disabled [ 0.924022] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 1.298714] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.706976] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.115022] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.117063] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.522700] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.930527] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.219914] console [ttyS0] enabled [ 3.220784] Console: switching to colour frame buffer device 240x67 [ 3.221845] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 3.225249] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 3.231072] serial-tegra 3130000.serial: RX in PIO mode [ 3.232045] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 3.240814] [drm] Initialized [ 3.265568] tegradc 15210000.nvdisplay: fb registered [ 3.271027] gpio tegra-gpio wake21 for gpio=121(P:1) [ 3.276667] brd: module loaded [ 3.277265] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 3.277347] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 3.277427] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 3.285467] Parent Clock set for DC plld2 [ 3.307682] loop: module loaded [ 3.311106] tegra_profiler: version: 1.132, samples/io: 46/26 [ 3.317107] tegra_profiler: auth: init [ 3.321556] nct1008_nct72 7-004c: starting parse dt [ 3.326631] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 3.332765] THERMAL EST: found 3 subdevs [ 3.332770] THERMAL EST num_resources: 0 [ 3.332774] [THERMAL EST subdev 0] [ 3.332779] [THERMAL EST subdev 1] [ 3.332791] [THERMAL EST subdev 2] [ 3.333168] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 3.333171] THERMAL EST: thz register success. [ 3.336863] THERMAL EST: end of probe, return err: 0 [ 3.338683] hisi_sas: driver version v1.6 [ 3.346709] tegradc 15210000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 3.347394] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 3.347406] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 3.348550] scsi host0: tegra_ahci [ 3.349705] scsi host1: tegra_ahci [ 3.349856] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 3.349861] ata2: DUMMY [ 3.351337] tegradc 15210000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 3.351379] tegradc 15210000.nvdisplay: hdmi: BL set VIC 0 [ 3.351383] tegradc 15210000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 3.352062] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 3.352066] Extcon AUX1(HDMI) enable [ 3.359188] libphy: Fixed MDIO Bus: probed [ 3.361789] tun: Universal TUN/TAP device driver, 1.6 [ 3.361793] tun: (C) 1999-2004 Max Krasnyansky [ 3.365564] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.365567] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.365656] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.365658] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.365744] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.365747] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.365838] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 3.365841] Copyright(c) 1999 - 2017 Intel Corporation. [ 3.367612] eqos 2490000.ether_qos: no PHY interrupt found [ 3.367827] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 3.371853] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b c4 e8 17 [ 3.372047] libphy: dwc_phy: probed [ 3.372514] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 3.376710] PPP generic driver version 2.4.2 [ 3.383078] PPP BSD Compression module registered [ 3.383119] PPP Deflate Compression module registered [ 3.383138] PPP MPPE Compression module registered [ 3.383143] NET: Registered protocol family 24 [ 3.383248] usbcore: registered new interface driver r8152 [ 3.383337] usbcore: registered new interface driver asix [ 3.383418] usbcore: registered new interface driver ax88179_178a [ 3.383500] usbcore: registered new interface driver cdc_ether [ 3.383577] usbcore: registered new interface driver net1080 [ 3.383652] usbcore: registered new interface driver cdc_subset [ 3.383729] usbcore: registered new interface driver zaurus [ 3.383828] usbcore: registered new interface driver cdc_ncm [ 3.384100] VFIO - User Level meta-driver version: 0.3 [ 3.385993] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.386009] ehci-pci: EHCI PCI platform driver [ 3.386095] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.386106] ohci-pci: OHCI PCI platform driver [ 3.386188] ohci-platform: OHCI generic platform driver [ 3.391934] usbcore: registered new interface driver uas [ 3.392031] usbcore: registered new interface driver usb-storage [ 3.392234] usbcore: registered new interface driver usbserial [ 3.397128] tegra-xudc-new 3550000.xudc: device count: 1 [ 3.399088] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 3.460212] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.462259] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.462270] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.462614] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.564467] tegra-usb-cd usb_cd: notification status (0x0, 0x1) [ 3.564473] tegra-usb-cd usb_cd: connected to SDP [ 3.564512] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 3.564724] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 3.565460] mousedev: PS/2 mouse device common for all mice [ 3.565517] usbcore: registered new interface driver xpad [ 3.662539] ata1: SATA link down (SStatus 0 SControl 300) [ 3.694463] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.695868] Wake73 for irq=42 [ 3.697274] rtc rtc1: alarm rtc device [ 3.697288] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 3.697313] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.697478] i2c /dev entries driver [ 3.699207] pca954x 2-0071: vcc-pullup regulator not found [ 3.699220] pca954x 2-0071: pca954x_probe: forcing device bus number, start 30. [ 3.699329] tegra-i2c 3180000.i2c: no acknowledge from address 0x71 [ 3.699363] pca954x 2-0071: probe failed [ 3.699977] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.704311] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 0 not supported [ 3.704863] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 3 not supported [ 3.706278] parse_throttle_dt_data: Num cap clks = 4 [ 3.706283] parse_throttle_dt_data: clk=mcpu type=1 [ 3.706286] parse_throttle_dt_data: clk=bcpu type=2 [ 3.706294] parse_throttle_dt_data: clk=gpu type=4 [ 3.706297] parse_throttle_dt_data: clk=emc type=3 [ 3.707483] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.708057] FAN dev name: pwm-fan [ 3.708115] FAN:gpio request success. [ 3.708124] FAN: can't find tach_gpio [ 3.708179] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 3.708490] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 3.708495] pwm_fan_driver pwm-fan: tach period: 1000 [ 3.708872] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 3.708878] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 3.708911] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 3.708915] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 3.708920] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 3.708924] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 3.708928] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 3.708932] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 3.708938] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 3.708943] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 3.710867] device-mapper: uevent: version 1.0.3 [ 3.712407] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.717307] cpufreq: platform driver Initialization: pass [ 3.720306] cpuidle: Initializing cpuidle driver init for Denver cluster [ 3.720421] cpuidle: Initializing cpuidle driver init for A57 cluster [ 3.726373] sdhci: Secure Digital Host Controller Interface driver [ 3.726375] sdhci: Copyright(c) Pierre Ossman [ 3.726377] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.727904] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 3.729808] CMDQ: cmdq_platfm_init successful [ 3.730977] CQE: CMD_TIMING bit set for R1B DCMD [ 3.734341] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 3.740454] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 3.740501] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 3.741103] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 3.742781] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 257 [ 3.747336] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.748187] tegra-se-nvhost 15810000.se: initialized [ 3.749267] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 3.749826] tegra-se-nvhost 15820000.se: initialized [ 3.750943] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 3.751486] tegra-se-nvhost 15830000.se: initialized [ 3.752316] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 3.752866] tegra-se-nvhost 15840000.se: initialized [ 3.753909] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 3.754127] hidraw: raw HID events driver (C) Jiri Kosina [ 3.756174] usbcore: registered new interface driver usbhid [ 3.756175] usbhid: USB HID core driver [ 3.761453] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.763654] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 3.763884] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.764028] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 3.764264] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 3.765397] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 3.765471] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 3.765521] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 3.765569] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 3.765670] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 3.766013] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (51) [ 3.766015] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 3.766528] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 3.768009] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.768445] tegra186-aondbg aondbg: aondbg driver probe() OK [ 3.768588] register_ari_mca_banks: Registered MCA ROC:IOB [ 3.768653] register_ari_mca_banks: Registered MCA ROC:CCE [ 3.768940] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.768943] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 3.768944] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 3.769001] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.769002] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 3.769004] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 3.769049] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.769051] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 3.769052] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 3.769101] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.769103] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 3.769104] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 3.769149] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.769150] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 3.769152] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 3.769195] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.769199] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 3.769200] tegra18-bridge 2100000.axip2p: bridge probed OK [ 3.769246] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.769250] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 3.769252] tegra18-bridge 2110000.axip2p: bridge probed OK [ 3.769295] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.769298] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 3.769300] tegra18-bridge 2120000.axip2p: bridge probed OK [ 3.769342] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.769346] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 3.769347] tegra18-bridge 2130000.axip2p: bridge probed OK [ 3.769390] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.769391] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 3.769393] tegra18-bridge 2140000.axip2p: bridge probed OK [ 3.769435] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.769440] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 3.769441] tegra18-bridge 2150000.axip2p: bridge probed OK [ 3.769484] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.769488] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 3.769490] tegra18-bridge 2160000.axip2p: bridge probed OK [ 3.769535] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.769539] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 3.769540] tegra18-bridge 2170000.axip2p: bridge probed OK [ 3.769583] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.769587] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 3.769589] tegra18-bridge 2180000.axip2p: bridge probed OK [ 3.769633] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.769636] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 3.769637] tegra18-bridge 2190000.axip2p: bridge probed OK [ 3.769688] **** A57 ECC: Enabled [ 3.769690] tegra18_a57_serr_init: on CPU 5 a A57 Core [ 3.769754] tegra18x_actmon d230000.actmon: in actmon_register()... [ 3.770178] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 3.770557] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 3.770671] denver_knobs_init:MTS_VERSION:43068234 [ 3.774124] nvpmodel: initialized successfully [ 3.775539] usbcore: registered new interface driver snd-usb-audio [ 3.776189] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.788183] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.789498] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 3.789617] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 3.792279] gpio tegra-gpio wake71 for gpio=125(P:5) [ 3.792340] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.826326] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 3.842959] mmc0: periodic cache flush enabled [ 3.842972] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 3.843633] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 3.843859] mmcblk0boot0: mmc0:0001 032G34 partition 1 4.00 MiB [ 3.844092] mmcblk0boot1: mmc0:0001 032G34 partition 2 4.00 MiB [ 3.844282] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 3.847575] OPE platform probe [ 3.847672] OPE platform probe successful [ 3.850239] tegra-asoc: sound: This is a dummy codec [ 3.852110] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 [ 3.895060] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 3.895132] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 3.895196] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 3.895260] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 3.895325] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 3.895389] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 3.895454] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 3.895518] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 3.895580] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 3.895644] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 3.895717] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 3.895784] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 3.895848] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 3.895914] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 3.895979] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 3.896052] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 3.896115] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 3.896204] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 3.896273] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 3.896338] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 3.929380] u32 classifier [ 3.929381] Actions configured [ 3.929434] Initializing XFRM netlink socket [ 3.929966] NET: Registered protocol family 10 [ 3.930495] NET: Registered protocol family 17 [ 3.930503] NET: Registered protocol family 15 [ 3.930559] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.930599] Bluetooth: RFCOMM socket layer initialized [ 3.930608] Bluetooth: RFCOMM ver 1.11 [ 3.930611] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.930614] Bluetooth: HIDP socket layer initialized [ 3.930628] 9pnet: Installing 9P2000 support [ 3.930657] Key type dns_resolver registered [ 3.937715] Registered cp15_barrier emulation handler [ 3.938298] Registered setend emulation handler [ 3.939151] registered taskstats version 1 [ 3.941963] isp 15600000.isp: initialized [ 3.945933] nvcsi 150c0000.nvcsi: initialized [ 3.951366] tegra-vi4 15700000.vi: initialized [ 3.952397] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 3.952910] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 3.952976] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 3.953036] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 3.953157] input: gpio-keys as /devices/gpio-keys/input/input2 [ 3.985245] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:19:49 UTC (946689589) [ 3.986010] mmcblk mmc0:0001: Card claimed for testing. [ 4.013955] bpmp: mounted debugfs mirror [ 4.014927] bwmgr: missing cdev-type property [ 4.019575] spmic-ldo0: disabling [ 4.019763] spmic-ldo1: disabling [ 4.019910] en-vdd-sd: disabling [ 4.019912] en-vdd-cam: disabling [ 4.019914] vdd-usb0-5v: disabling [ 4.019915] vdd-usb1-5v: disabling [ 4.019917] en-vdd-disp-3v3: disabling [ 4.019918] en-mdm-pwr-3v7: disabling [ 4.019920] en-vdd-disp-1v8: disabling [ 4.019921] en-vdd-cam-hv-2v8: disabling [ 4.019922] en-vdd-cam-1v2: disabling [ 4.019924] vdd-fan: disabling [ 4.019925] vdd-3v3: disabling [ 4.019926] en-vdd-vcm-2v8: disabling [ 4.019928] vdd-usb2-5v: disabling [ 4.019929] vdd-sys-bl: disabling [ 4.019930] en-vdd-sys: disabling [ 4.019932] ALSA device list: [ 4.019934] #0: tegra-hda at 0x3518000 irq 383 [ 4.019935] #1: tegra-snd-t186ref-mobile-rt565x [ 4.049005] mmc1: Applying tuning correction [ 4.049031] mmc1: Tap value after applying correction 61 [ 4.049038] mmc1: hw tuning done ... [ 4.056218] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 5.084978] nct1008_nct72 7-004c: success parsing dt [ 5.085050] tegradc 15210000.nvdisplay: blank - powerdown [ 5.085335] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 5.117683] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 5.118259] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 5.132117] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 5.132119] Extcon AUX1(HDMI) disable [ 5.151134] nct1008_nct72 7-004c: initial LOC temp: 35000 [ 5.151492] nct1008_nct72 7-004c: initial EXT temp: 48000 [ 5.152167] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 5.152609] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 5.152814] nct1008_nct72 7-004c: nct1008_probe: initialized [ 5.154768] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 5.154970] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 5.155524] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 5.173895] tegradc 15210000.nvdisplay: unblank [ 5.174634] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 5.174743] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 5.174854] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 5.176352] Parent Clock set for DC plld2 [ 5.180224] tegradc 15210000.nvdisplay: hdmi: tmds rate:154000K prod-setting:prod_c_hdmi_111m_223m [ 5.181621] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 5.181629] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 5.185212] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 5.185214] Extcon AUX1(HDMI) enable [ 5.191871] random: crng init done [ 7.377896] extcon-disp-state external-connection:disp-state: cable 40 state 1 [ 7.387558] Extcon HDMI: HPD enabled [ 7.392873] tegradc 15210000.nvdisplay: hdmi: plugged [ 7.406791] EXT4-fs (mmcblk0p1): 3 orphan inodes deleted [ 7.413879] EXT4-fs (mmcblk0p1): recovery complete [ 7.424454] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.434352] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 7.448187] devtmpfs: mounted [ 7.454885] Freeing unused kernel memory: 8448K [ 7.606496] systemd[1]: System time before build time, advancing clock. [ 7.657570] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.708637] cgroup: cgroup2: unknown option "nsdelegate" [ 7.737612] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.765821] systemd[1]: Detected architecture arm64. [ 7.874910] systemd[1]: Set hostname to . [ 7.973672] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 7.992863] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 8.202503] systemd[1]: Created slice System Slice. [ 8.212821] systemd[1]: Listening on Journal Audit Socket. [ 8.222800] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 8.234243] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.245318] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.352638] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.369453] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 8.593824] systemd-journald[2165]: Received request to flush runtime journal from PID 1 [ 9.492296] tegra-i2c c240000.i2c: no acknowledge from address 0x69 [ 9.502825] bmi160 1-0069: bmi_i2c_rd ERR: 0x00 [ 9.513391] bmi160 1-0069: bmi_init _id_i2c ERR [ 10.548604] vdd-1v8: voltage operation not allowed [ 10.548621] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 10.568469] vdd-1v8: voltage operation not allowed [ 10.568486] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 10.589309] vdd-1v8: voltage operation not allowed [ 10.589328] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 10.591771] vdd-1v8: voltage operation not allowed [ 10.591781] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 10.700503] vdd-1v8: voltage operation not allowed [ 10.700521] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 10.701459] vdd-1v8: voltage operation not allowed [ 10.701470] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 10.703024] vdd-1v8: voltage operation not allowed [ 10.703032] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)