[ 1488.635735] systemd-shutdow: 38 output lines suppressed due to ratelimiting

[ 1488.992983] CPU3: shutdown

[ 1489.037069] CPU4: shutdown

[ 1489.076972] CPU5: shutdown

[ 1489.084627] reboot: Power down

[0000.225] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c700205d)

[0000.234] I> bit @ 0xd480000

[0000.237] I> Boot-device: eMMC

[0000.244] I> sdmmc bdev is already initialized

[0000.249] I> pmic: reset reason (nverc)	: 0x40

[0000.280] I> Found 19 partitions in SDMMC_BOOT (instance 3)

[0000.299] I> Found 33 partitions in SDMMC_USER (instance 3)

[0000.305] W> No valid slot number is found in scratch register

[0000.311] W> Return default slot: _a

[0000.314] I> A/B: bin_type (16) slot 0

[0000.318] I> Loading partition bpmp-fw at 0xd7800000

[0000.323] I> Reading two headers - addr:0xd7800000 blocks:1

[0000.328] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1

[0000.353] I> Binary(16) of size 533504 is loaded @ 0xd7800000

[0000.358] W> No valid slot number is found in scratch register

[0000.364] W> Return default slot: _a

[0000.368] I> A/B: bin_type (17) slot 0

[0000.371] I> Loading partition bpmp-fw-dtb at 0xd79f0000

[0000.376] I> Reading two headers - addr:0xd79f0000 blocks:1

[0000.382] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1

[0000.408] I> Binary(17) of size 604720 is loaded @ 0xd796c400

[0000.637] I> Loading SCE-FW ...

[0000.640] W> No valid slot number is found in scratch register

[0000.645] W> Return default slot: _a

[0000.649] I> A/B: bin_type (12) slot 0

[0000.652] I> Loading partition sce-fw at 0xd7300000

[0000.657] I> Reading two headers - addr:0xd7300000 blocks:1

[0000.663] I> Addr: 0xd7300000, start-block: 58784120, num_blocks: 1

[0000.682] I> Binary(12) of size 125168 is loaded @ 0xd7300000

[0000.687] I> Init SCE

[0000.690] I> Loading APE-FW ...

[0000.693] W> No valid slot number is found in scratch register

[0000.698] W> Return default slot: _a

[0000.702] I> A/B: bin_type (11) slot 0

[0000.705] I> Loading partition adsp-fw at 0xd7400000

[0000.710] I> Reading two headers - addr:0xd7400000 blocks:1

[0000.716] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1

[0000.735] I> Binary(11) of size 107808 is loaded @ 0xd7400000

[0000.741] I> Copy BTCM section

[0000.744] W> No valid slot number is found in scratch register

[0000.749] W> Return default slot: _a

[0000.753] I> A/B: bin_type (13) slot 0

[0000.756] I> Loading partition cpu-bootloader at 0x96000000

[0000.762] I> Reading two headers - addr:0x96000000 blocks:1

[0000.767] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1

[0000.788] I> Binary(13) of size 284816 is loaded @ 0x96000000

[0000.794] W> No valid slot number is found in scratch register

[0000.799] W> Return default slot: _a

[0000.803] I> A/B: bin_type (20) slot 0

[0000.806] I> Loading partition bootloader-dtb at 0x8520f400

[0000.812] I> Reading two headers - addr:0x8520f400 blocks:1

[0000.817] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1

[0000.838] I> Binary(20) of size 284960 is loaded @ 0x8520f400

[0000.844] W> No valid slot number is found in scratch register

[0000.850] W> Return default slot: _a

[0000.853] I> A/B: bin_type (14) slot 0

[0000.857] I> Loading partition secure-os at 0x8530f600

[0000.862] I> Reading two headers - addr:0x8530f600 blocks:1

[0000.867] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1

[0000.889] I> Binary(14) of size 366000 is loaded @ 0x8530f600

[0000.897] I> TOS boot-params @ 0x85000000

[0000.901] I> TOS params prepared

[0000.904] I> Loading EKS ...

[0000.906] I> A/B: bin_type (15) slot 0

[0000.910] I> Loading partition eks at 0x8590f800

[0000.914] I> Reading two headers - addr:0x8590f800 blocks:1

[0000.920] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1

[0000.939] I> Binary(15) of size 1040 is loaded @ 0x8590f800

[0000.944] I> EKB detected (length: 0x400) @ 0x8590f800

[0000.949] I> Copied encrypted keys

[0000.953] I> boot profiler @ 0x275844000

[0000.957] I> boot profiler for TOS @ 0x275844000

[0000.962] I> Unhalting SCE

[0000.964] I> Primary Memory Start:80000000 Size:70000000

[0000.969] I> Extended Memory Start:f0110000 Size:1856f0000

[0000.976] I> MB2(TBoot-BPMP) done



NOTICE:  BL31: v1.3(release):41d46a9cf

NOTICE:  BL31: Built : 21:14:44, Jun 25 2020

ipc-unittest-main: 1519: Welcome to IPC unittest!!!

ipc-unittest-main: 1531: waiting forever

ipc-unittest-srv: 329: Init unittest services!!!

hwkey-agent: 40: hwkey-agent is running!!

hwkey-agent: 182: key_mgnt_processing .......

hwkey-agent: 157: Init hweky-agent services!!

platform_bootstrap_epilog: trusty bootstrap complete

[0001.348] I> Welcome to Cboot

[0001.351] I> Cboot Version: t186-02737b3e

[0001.355] I> CPU-BL Params @ 0x275800000

[0001.359] I>  0) Base:0x00000000 Size:0x00000000

[0001.363] I>  1) Base:0x277f00000 Size:0x00100000

[0001.368] I>  2) Base:0x277e00000 Size:0x00100000

[0001.372] I>  3) Base:0x277d00000 Size:0x00100000

[0001.377] I>  4) Base:0x277c00000 Size:0x00100000

[0001.381] I>  5) Base:0x277b00000 Size:0x00100000

[0001.386] I>  6) Base:0x277800000 Size:0x00200000

[0001.390] I>  7) Base:0x277400000 Size:0x00400000

[0001.395] I>  8) Base:0x277a00000 Size:0x00100000

[0001.399] I>  9) Base:0x277300000 Size:0x00100000

[0001.404] I> 10) Base:0x276800000 Size:0x00800000

[0001.408] I> 11) Base:0x30000000 Size:0x00040000

[0001.413] I> 12) Base:0xf0000000 Size:0x00100000

[0001.417] I> 13) Base:0x30040000 Size:0x00001000

[0001.422] I> 14) Base:0x30048000 Size:0x00001000

[0001.426] I> 15) Base:0x30049000 Size:0x00001000

[0001.430] I> 16) Base:0x3004a000 Size:0x00001000

[0001.435] I> 17) Base:0x3004b000 Size:0x00001000

[0001.439] I> 18) Base:0x3004c000 Size:0x00001000

[0001.444] I> 19) Base:0x3004d000 Size:0x00001000

[0001.448] I> 20) Base:0x3004e000 Size:0x00001000

[0001.453] I> 21) Base:0x3004f000 Size:0x00001000

[0001.457] I> 22) Base:0x00000000 Size:0x00000000

[0001.462] I> 23) Base:0xf0100000 Size:0x00010000

[0001.466] I> 24) Base:0x00000000 Size:0x00000000

[0001.470] I> 25) Base:0x00000000 Size:0x00000000

[0001.475] I> 26) Base:0x00000000 Size:0x00000000

[0001.479] I> 27) Base:0x00000000 Size:0x00000000

[0001.484] I> 28) Base:0x84400000 Size:0x00400000

[0001.488] I> 29) Base:0x30000000 Size:0x00010000

[0001.493] I> 30) Base:0x278000000 Size:0x08000000

[0001.497] I> 31) Base:0x00000000 Size:0x00000000

[0001.501] I> 32) Base:0x276000000 Size:0x00600000

[0001.506] I> 33) Base:0x80000000 Size:0x70000000

[0001.510] I> 34) Base:0xf0110000 Size:0x1856f0000

[0001.515] I> 35) Base:0x00000000 Size:0x00000000

[0001.519] I> 36) Base:0x00000000 Size:0x00000000

[0001.524] I> 37) Base:0x2772e0000 Size:0x00020000

[0001.528] I> 38) Base:0x84000000 Size:0x00400000

[0001.533] I> 39) Base:0x96000000 Size:0x02000000

[0001.537] I> 40) Base:0x85000000 Size:0x01200000

[0001.542] I> 41) Base:0x275800000 Size:0x00500000

[0001.546] I> 42) Base:0x00000000 Size:0x00000000

[0001.551] I> 43) Base:0x00000000 Size:0x00000000

[0001.555] GIC-SPI Target CPU: 4


[0001.558] Interrupts Init done


[0001.562] calling constructors


[0001.565] initializing heap

[0001.567] initializing threads


[0001.571] initializing timers


[0001.574] creating bootstrap completion thread


[0001.578] top of bootstrap2()


[0001.581] CPU: ARM Cortex A57


[0001.585] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100


[0001.590] initializing platform


[0001.593] I> Bl_dtb @0x8520f400

[0001.596] I> gpio framework initialized

[0001.602] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver

[0001.611] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver

[0001.619] I> GPIO framework and drivers are initialized.

[0001.624] I> Boot-device: eMMC

[0001.631] I> sdmmc bdev is already initialized

[0001.662] I> Found 19 partitions in SDMMC_BOOT (instance 3)

[0001.679] I> Found 33 partitions in SDMMC_USER (instance 3)

[0001.684] W> opt-in fuse is not set, skip fuse_burning

[0001.689] I> Reserved memory at 0xfbe00000 for U-Boot relocation

[0001.695] W> No valid slot number is found in scratch register

[0001.701] W> Return default slot: _a

[0001.704] I> A/B: bin_type (21) slot 0

[0001.708] I> Loading kernel-dtb from partition

[0001.712] I> Loading partition kernel-dtb at 0x80000000 from device(0x1)

[0001.729] I> Kernel_dtb @0x80000000

[0001.733] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee

[0001.741] E> I2C: slave not found in slaves.

[0001.745] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false.

[0001.753] E> I2C_DEV: Failed to send register address 0x00000004.

[0001.759] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0.

[0001.768] E> tca9539_device_init: failed to write polar reg

[0001.773] E> tegrabl_tca9539_init: failed to init device!

[0001.778] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8

[0001.785] E> I2C: slave not found in slaves.

[0001.789] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false.

[0001.797] E> I2C_DEV: Failed to send register address 0x00000004.

[0001.803] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0.

[0001.812] E> tca9539_device_init: failed to write polar reg

[0001.817] E> tegrabl_tca9539_init: failed to init device!

[0001.825] I> fixed regulator driver initialized

[0001.854] I> register 'maxim' power off handle

[0001.859] I> virtual i2c enabled

[0001.862] I> registered 'maxim,max77620' pmic

[0001.867] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver

[0001.878] I> Find /i2c@c250000's alias i2c7

[0001.882] I> Reading eeprom i2c=7 address=0x50

[0001.911] I> Device at /i2c@c250000:0x50

[0001.915] I> Reading eeprom i2c=7 address=0x57

[0001.943] I> Device at /i2c@c250000:0x57

[0001.948] I> Find /i2c@c240000's alias i2c1

[0001.952] I> Reading eeprom i2c=1 address=0x51

[0001.957] E> I2C: slave not found in slaves.

[0001.961] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true.

[0001.969] E> I2C_DEV: Failed to send register address 0x00000000.

[0001.975] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1.

[0001.984] E> eeprom: Retry to read I2C slave device.

[0001.989] E> I2C: slave not found in slaves.

[0001.993] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true.

[0002.001] E> I2C_DEV: Failed to send register address 0x00000000.

[0002.007] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1.

[0002.016] E> eeprom: Failed to read I2C slave device

[0002.021] I> Eeprom read failed 0x3526070d

[0002.025] I> Find /i2c@3160000's alias i2c0

[0002.029] I> Reading eeprom i2c=0 address=0x50

[0002.034] E> I2C: slave not found in slaves.

[0002.038] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true.

[0002.046] E> I2C_DEV: Failed to send register address 0x00000000.

[0002.051] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0.

[0002.061] E> eeprom: Failed to read I2C slave device

[0002.066] I> Eeprom read failed 0x3526070d

[0002.070] I> Find /i2c@3180000's alias i2c2

[0002.074] I> Reading eeprom i2c=2 address=0x54

[0002.079] I> Enabling gpio chip_id = 2, gpio pin = 9

[0002.083] C> GPIO driver for chip_id 0x2 could not be found

[0002.089] E> cam_eeprom_read: Can't get gpio driver

[0002.093] I> Eeprom read failed 0x4d4d000d

[0002.097] I> Reading eeprom i2c=2 address=0x57

[0002.102] I> Enabling gpio chip_id = 2, gpio pin = 9

[0002.106] C> GPIO driver for chip_id 0x2 could not be found

[0002.112] E> cam_eeprom_read: Can't get gpio driver

[0002.117] I> Eeprom read failed 0x4d4d000d

[0002.120] I> create_pm_ids: id: 3310-1000-D00-J, len: 15[0002.171] I> enabling 'vdd-hdmi' regulator

1)

[0003.412] I> Validate kernel ...

[0003.415] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000

[0003.422] I> kernel-dtb is already loaded

[0003.426] I> Validate kernel-dtb ...

[0003.430] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000

[0003.437] I> Checking boot.img header magic ... [0003.441] I> [OK]

[0003.443] I> Kernel hdr @0x80400000

[0003.446] I> Kernel dtb @0x80000000

[0003.450] I> decompressor handler not found

[0003.454] I> Copying kernel image (477244 bytes) from 0x80400800 to 0x80600000 ... [0003.461] I> Done

[0003.463] I> Move ramdisk (len: 0) from 0x80475800 to 0x947b0000

[0003.470] I> Updated bpmp info to DTB

[0003.475] I> Ramdisk: Base: 0x947b0000; Size: 0x0

[0003.480] I> Updated initrd info to DTB

[0003.483] W> WARN: Fail to override "console=none" in commandline

[0003.489] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params

[0003.497] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params

[0003.504] I> disabled_core_mask: 0xffffff0c

[0003.508] W> No valid slot number is found in scratch register

[0003.513] W> Return default slot: _a

[0003.517] I> Active slot suffix: 

[0003.520] I> add_boot_slot_suffix: slot_suffix = 

[0003.524] I> Linux Cmdline: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2  video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 

[0003.574] I> Updated bootarg info to DTB

[0003.578] I> eeprom_get_mac_addr: MAC (type: 0): 48:b0:2d:0e:08:a5

[0003.584] I> eeprom_get_mac_addr: MAC (type: 1): 48:b0:2d:0e:08:a6

[0003.591] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:0e:08:a7

[0003.597] E> Found no plugin manager ids in source DT

[0003.602] W> Add plugin manager ids from board info

[0003.606] W> "plugin-manager" doesn't exist, creating

[0003.611] W> "ids" doesn't exist, creating

[0003.615] W> "connection" doesn't exist, creating

[0003.620] W> "configs" doesn't exist, creating

[0003.624] I> create_pm_ids: id: 3310-1000-D00-J, len: 15

[0003.629] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93

[0003.640] I> create_pm_ids: id: XXXX-XXXX-XXX-X, len: 15

[0003.645] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93

[0003.656] I> Adding plugin-manager/ids/3310-1000-D00=/i2c@c250000:module@0x50

[0003.664] W> "i2c@c250000" doesn't exist, creating

[0003.668] W> "module@0x50" doesn't exist, creating

[0003.673] I> Adding plugin-manager/ids/XXXX-XXXX-XXX=/i2c@c250000:module@0x57

[0003.680] W> "module@0x57" doesn't exist, creating

[0003.686] I> Adding plugin-manager/ids/3310-1000-D00-J

[0003.693] I> Adding plugin-manager/configs/3310-mem-type 00

[0003.698] I> Adding plugin-manager/configs/3310-power-config 00

[0003.704] I> Adding plugin-manager/configs/3310-misc-config 00

[0003.710] I> Adding plugin-manager/configs/3310-modem-config 00

[0003.716] I> Adding plugin-manager/configs/3310-touch-config 00

[0003.722] I> Adding plugin-manager/configs/3310-display-config 00

[0003.728] I> Adding plugin-manager/cvm

[0003.732] W> "chip-id" doesn't exist, creating

[0003.736] I> Adding plugin-manager/chip-id/A02P

[0003.741] W> "odm-data" doesn't exist, creating

[0003.745] I> Adding /chosen/plugin-manager/odm-data

[0003.754] I> added [base:0x80000000, size:0x70000000] to /memory

[0003.760] I> added [base:0xf0200000, size:0x185600000] to /memory

[0003.766] I> added [base:0x275e00000, size:0x200000] to /memory

[0003.772] I> added [baer/fragement@0 matches

[0003.849] I> node /plugin-manager/fragement@4 matches

7.8 GiB

MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1

*** Warning - bad CRC, using default environment



In:    serial

Out:   serial

Err:   serial

Net:   eth0: ethernet@2490000

Hit any key to stop autoboot:  2  1  0 

MMC: no card present

switch to partitions #0, OK

mmc0(part 0) is current device

Scanning mmc 0:1...

Found /boot/extlinux/extlinux.conf

Retrieving file: /boot/extlinux/extlinux.conf

857 bytes read in 132 ms (5.9 KiB/s)

1:	primary kernel

Retrieving file: /boot/initrd

5565615 bytes read in 259 ms (20.5 MiB/s)

Retrieving file: /boot/Image

34265096 bytes read in 854 ms (38.3 MiB/s)

append: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2  video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 

## Flattened Device Tree blob at 80000000

   Booting using the fdt blob at 0x80000000

   reserving fdt memory region: addr=80000000 size=10000

   Using Device Tree in place at 0000000080000000, end 000000008004a8b1



Starting kernel ...



[    0.000000] Booting Linux on physical CPU 0x100

[    0.000000] Linux version 4.9.140-tegra (fangbin@fangbin-ThinkPad-X100e) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jan 4 16:58:35 CST 2021

[    0.000000] Boot CPU: AArch64 Processor [411fd073]

[    0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416,

[    0.000000] OF: fdt: - 80000000 ,  70000000

[    0.000000] OF: fdt: - f0200000 ,  185600000

[    0.000000] OF: fdt: - 275e00000 ,  200000

[    0.000000] OF: fdt: - 276600000 ,  200000

[    0.000000] OF: fdt: - 277000000 ,  200000

[    0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '')

[    0.000000] bootconsole [uart8250] enabled

[    0.000000] Found tegra_fbmem2: 00800000@9607d000

[    0.000000] Found lut_mem2: 00002008@9607a000

[    0.486444] pca953x 0-0074: failed reading register

[    0.486844] pca953x 0-0077: failed reading register

[    1.116695] imx219 30-0010: imx219_board_setup: error during i2c read probe (-121)

[    1.124466] imx219 30-0010: board setup failed

[    1.180735] imx219 32-0010: imx219_board_setup: error during i2c read probe (-121)

[    1.180837] imx219 32-0010: board setup failed

[    1.240541] imx219 34-0010: imx219_board_setup: error during i2c read probe (-121)

[    1.241176] imx219 34-0010: board setup failed

[    1.269157] imx219 35-0010: imx219_board_setup: error during i2c read probe (-121)

[    1.269713] imx219 35-0010: board setup failed

[    3.630670] cgroup: cgroup2: unknown option "nsdelegate"

[    4.722695] using random self ethernet address

[    4.771715] using random host ethernet address

[    5.471878] using random self ethernet address

[    5.491749] using random host ethernet address

[    5.975157] CPU1: shutdown

[    6.037897] CPU2: shutdown

[    7.840240] vdd-1v8: voltage operation not allowed

[    7.840262] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)

[    7.860011] vdd-1v8: voltage operation not allowed

[    7.860033] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)

[    7.881044] vdd-1v8: voltage operation not allowed

[    7.881066] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)

[    7.883606] vdd-1v8: voltage operation not allowed

[    7.883620] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)

[    7.996021] vdd-1v8: voltage operation not allowed

[    7.996044] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)

[    7.997075] vdd-1v8: voltage operation not allowed

[    7.997096] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)

[    7.998784] vdd-1v8: voltage operation not allowed

[    7.998800] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)




Ubuntu 18.04.4 LTS pld-desktop ttyS0



pld-desktop login: pld

pld




Password:    





Login incorrect

pld-desktop login: pld

pld



Password:  



Welcome to Ubuntu 18.04.4 LTS (GNU/Linux 4.9.140-tegra aarch64)



 * Documentation:  https://help.ubuntu.com

 * Management:     https://landscape.canonical.com

 * Support:        https://ubuntu.com/advantage

This system has been minimized by removing packages and content that are

not required on a system that users do not log into.



To restore this content, you can run the 'unminimize' command.



357 packages can be updated.

260 updates are security updates.





The programs included with the Ubuntu system are free software;

the exact distribution terms for each program are described in the

individual files in /usr/share/doc/*/copyright.



Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by

applicable law.



pld@pld-desktop:~$ 

pld@pld-desktop:~$ sudo apt autoremove --purge nvidia-l4t-jetson-multimedia-api



sudo apt autoremove --purge nvidia-l4t-jetson-multimedia-api

[sudo] password for pld: 

Sorry, try again.

[sudo] password for pld: sudo apt autoremove --purge nvidia-l4t-jetson-multimedia-api





Sorry, try again.

[sudo] password for pld:  






Reading package lists... 0%

Reading package lists... 100%

Reading package lists... Done



Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree       



Reading state information... 0%

Reading state information... 0%

Reading state information... Done


The following packages will be REMOVED:

  cuda-cudart-10-2* cuda-cudart-dev-10-2* cuda-driver-dev-10-2*

  cuda-license-10-2* libcublas-dev* libcublas10* libcudnn8* libcudnn8-dev*

  libnvinfer-bin* libnvinfer-dev* libnvinfer-doc* libnvinfer-plugin-dev*

  libnvinfer-plugin7* libnvinfer-samples* libnvinfer7* libnvonnxparsers-dev*

  libnvonnxparsers7* libnvparsers-dev* libnvparsers7*

  nvidia-l4t-jetson-multimedia-api* tensorrt*

0 upgraded, 0 newly installed, 21 to remove and 355 not upgraded.

After this operation, 3,837 MB disk space will be freed.

Do you want to continue? [Y/n] 
78(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 121333 files and directories currently installed.)

Removing nvidia-l4t-jetson-multimedia-api (32.4.4-20201027211332) ...

7Progress: [  0%] [..........................................................] 87Progress: [  2%] [#.........................................................] 87Progress: [  3%] [#.........................................................] 87Progress: [  4%] [##........................................................] 87Progress: [  5%] [##........................................................] 8Removing tensorrt (7.1.3.0-1+cuda10.2) ...

7Progress: [  6%] [###.......................................................] 87Progress: [  7%] [###.......................................................] 87Progress: [  8%] [####......................................................] 87Progress: [  8%] [####......................................................] 87Progress: [  9%] [#####.....................................................] 8Removing libnvinfer-bin (7.1.3-1+cuda10.2) ...

7Progress: [ 10%] [######....................................................] 87Progress: [ 11%] [######....................................................] 87Progress: [ 12%] [#######...................................................] 87Progress: [ 13%] [#######...................................................] 87Progress: [ 14%] [########..................................................] 8Removing libnvinfer-samples (7.1.3-1+cuda10.2) ...

7Progress: [ 15%] [########..................................................] 87Progress: [ 16%] [#########.................................................] 87Progress: [ 18%] [##########................................................] 87Progress: [ 19%] [##########................................................] 8Removing libnvparsers-dev (7.1.3-1+cuda10.2) ...

7Progress: [ 20%] [###########...............................................] 87Progress: [ 21%] [############..............................................] 87Progress: [ 22%] [############..............................................] 87Progress: [ 23%] [#############.............................................] 87Progress: [ 24%] [#############.............................................] 8Removing libnvinfer-doc (7.1.3-1+cuda10.2) ...

7Progress: [ 25%] [##############............................................] 87Progress: [ 25%] [##############............................................] 87Progress: [ 26%] [###############...........................................] 87Progress: [ 27%] [###############...........................................] 87Progress: [ 28%] [################..........................................] 8Removing libnvinfer-plugin-dev (7.1.3-1+cuda10.2) ...

7Progress: [ 29%] [################..........................................] 87Progress: [ 30%] [#################.........................................] 87Progress: [ 31%] [##################........................................] 87Progress: [ 32%] [##################........................................] 87Progress: [ 33%] [###################.......................................] 8Removing libnvinfer-plugin7 (7.1.3-1+cuda10.2) ...

7Progress: [ 35%] [####################......................................] 87Progress: [ 36%] [####################......................................] 87Progress: [ 37%] [#####################.....................................] 87Progress: [ 38%] [#####################.....................................] 8Removing libnvonnxparsers-dev (7.1.3-1+cuda10.2) ...

7Progress: [ 39%] [######################....................................] 87Progress: [ 40%] [######################....................................] 87Progress: [ 41%] [#######################...................................] 87Progress: [ 42%] [########################..................................] 87Progress: [ 42%] [########################..................................] 8Removing libnvonnxparsers7 (7.1.3-1+cuda10.2) ...

7Progress: [ 43%] [#########################.................................] 87Progress: [ 44%] [#########################.................................] 87Progress: [ 45%] [##########################................................] 87Progress: [ 46%] [##########################................................] 87Progress: [ 47%] [###########################...............................] 8Removing libnvparsers7 (7.1.3-1+cuda10.2) ...

7Progress: [ 48%] [###########################...............................] 87Progress: [ 49%] [############################..............................] 87Progress: [ 50%] [#############################.............................] 87Progress: [ 52%] [##############################............................] 8Removing libnvinfer-dev (7.1.3-1+cuda10.2) ...

7Progress: [ 53%] [##############################............................] 87Progress: [ 54%] [###############################...........................] 87Progress: [ 55%] [###############################...........................] 87Progress: [ 56%] [################################..........................] 87Progress: [ 57%] [################################..........................] 8Removing cuda-cudart-dev-10-2 (10.2.89-1) ...

7Progress: [ 58%] [#################################.........................] 87Progress: [ 58%] [#################################.........................] 8Removing libnvinfer7 (7.1.3-1+cuda10.2) ...

7Progress: [ 62%] [####################################7Progress: [ 73%] [##########################################................] 87Progress: [ 74%] [##########################################................] 87Progress: [ 75%] [###########################################...............] 8Removing libcublas-dev (10.2.2.89-1) ...

7Progress: [ 75%] [###########################################...............] 87Progress: [ 76%] [############################################..............] 87Progress: [ 77%] [############################################..............] 87Progress: [ 78%] [#############################################.............] 87Progress: [ 79%] [#############################################.............] 8Removing libcublas10 (10.2.2.89-1) ...

7Progress: [ 80%] [##############################################............] 87Progress: [ 81%] [###############################################...........] 87Progress: [ 82%] [###############################################...........] 87Progress: [ 83%] [################################################..........] 8Removing cuda-license-10-2 (10.2.89-1) ...

7Progress: [ 85%] [#################################################.........] 87Progress: [ 86%] [#################################################.........] 87Progress: [ 87%] [##################################################........] 87Progress: [ 88%] [##################################################........] 8dpkg: warning: while removing cuda-license-10-2, directory '/usr/local' not empty so not removed

7Progress: [ 89%] [###################################################.......] 8Removing libcudnn8-dev (8.0.0.180-1+cuda10.2) ...

7Progress: [ 90%] [###################################################.......] 8update-alternatives: removing manually selected alternative - switching libcudnn to auto mode

7Progress: [ 91%] [####################################################......] 87Progress: [ 92%] [#####################################################.....] 87Progress: [ 92%] [#####################################################.....] 87Progress: [ 93%] [######################################################....] 8Removing libcudnn8 (8.0.0.180-1+cuda10.2) ...

7Progress: [ 94%] [######################################################....] 87Progress: [ 95%] [#######################################################...] 87Progress: [ 96%] [#######################################################...] 87Progress: [ 97%] [########################################################..] 87Progress: [ 98%] [########################################################..] 8Processing triggers for libc-bin (2.27-3ubuntu1) ...

(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 118356 files and directories currently installed.)

Purging configuration files for cuda-cudart-10-2 (10.2.89-1) ...

7Progress: [ 99%] [#########################################################.] 8

78pld@pld-desktop:~$