\00\FF\E2
[0241.057] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses.
[0241.066] I> MB1 (prd-version: 1.5.1.6-t194-41334769-1740dd39)
[0241.071] I> Boot-mode: Platform RCM
[0241.074] I> Chip revision : A02P
[0241.077] I> Bootrom patch version : 15 (correctly patched)
[0241.083] I> ATE fuse revision : 0x200
[0241.086] I> Ram repair fuse : 0x0
[0241.089] I> Ram Code : 0x0
[0241.092] I> rst_source : 0xb
[0241.095] I> rst_level : 0x1
[0241.098] I> USB configuration success
[0243.144] I> mb2 image downloaded
[0243.170] I> Recovery boot mode 0
[0243.173] I> Boot-device: QSPI
[0243.178] I> UPHY full init done
[0243.183] I> MB1 done

[0243.188] W> Profiler not initialized
[0243.191] I> Welcome to MB2(TBoot-BPMP) Applet (version: 00.00.2018.32-mobile-e677d209)
[0243.199] W> Profiler not initialized
[0243.203] I> DMA Heap @ [0x40020000 - 0x40065800]
[0243.207] I> Default Heap @ [0xd486400 - 0xd48a400]
[0243.212] W> Profiler not initialized
[0243.216] W> Profiler not initialized
[0243.219] E> DEVICE_PROD: Invalid value data = 0, size = 0.
[0243.225] W> device prod register failed
[0243.228] W> Profiler not initialized
[0243.233] E> Error in command_complete 18000 int_status
[0243.238] E> OCR failed, error = f0f0706
[0243.242] I> SDMMC is not present.
[0243.245] I> QSPI Flash Size = 32 MB
[0243.254] I> Qspi initialized successfully
[0243.305] E> Link startup dme_set failed
[0243.309] E> UFS initialization failed
[0243.313] I> UFS is not present
[0243.316] W> Profiler not initialized
[0243.321] I> Found 47 partitions in QSPI_FLASH (instance 0)
[0243.326] W> Profiler not initialized
[0243.330] W> Profiler not initialized
[0243.333] W> Profiler not initialized
[0243.337] I> Entering 3p server
[0243.340] I> USB configuration success
[0244.245] I> Populate chip info
[0244.272] I> Populate eeprom info
[0244.276] I> Populate eeprom info for module cvm
[0244.348] I> Rebooting : reboot-recovery


[024\00\FF\E2
[0002.180] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses.
[0002.189] I> MB1 (prd-version: 1.5.1.6-t194-41334769-1740dd39)
[0002.194] I> Boot-mode: Platform RCM
[0002.198] I> Chip revision : A02P
[0002.201] I> Bootrom patch version : 15 (correctly patched)
[0002.206] I> ATE fuse revision : 0x200
[0002.209] I> Ram repair fuse : 0x0
[0002.212] I> Ram Code : 0x0
[0002.215] I> rst_source : 0xb
[0002.218] I> rst_level : 0x1
[0002.222] I> USB configuration success
[0004.283] I> mb2 image downloaded
[0004.312] I> Recovery boot mode 0
[0004.315] I> Boot-device: QSPI
[0004.320] I> UPHY full init done
[0004.324] I> MB1 done

[0004.329] W> Profiler not initialized
[0004.332] I> Welcome to MB2(TBoot-BPMP) Applet (version: 00.00.2018.32-mobile-e677d209)
[0004.340] W> Profiler not initialized
[0004.344] I> DMA Heap @ [0x40020000 - 0x40065800]
[0004.348] I> Default Heap @ [0xd486400 - 0xd48a400]
[0004.353] W> Profiler not initialized
[0004.357] W> Profiler not initialized
[0004.360] E> DEVICE_PROD: Invalid value data = 0, size = 0.
[0004.366] W> device prod register failed
[0004.369] W> Profiler not initialized
[0004.374] E> Error in command_complete 18000 int_status
[0004.379] E> OCR failed, error = f0f0706
[0004.383] I> SDMMC is not present.
[0004.386] I> QSPI Flash Size = 32 MB
[0004.395] I> Qspi initialized successfully
[0004.446] E> Link startup dme_set failed
[0004.450] E> UFS initialization failed
[0004.453] I> UFS is not present
[0004.456] W> Profiler not initialized
[0004.462] I> Found 47 partitions in QSPI_FLASH (instance 0)
[0004.467] W> Profiler not initialized
[0004.471] W> Profiler not initialized
[0004.474] W> Profiler not initialized
[0004.478] I> Entering 3p server
[0004.481] I> USB configuration success
[0005.390] I> Populate chip info
[0005.414] I> Populate eeprom info
[0005.418] I> Populate eeprom info for module cvm
[0005.498] I> Reb\00\FF\E2
[0016.225] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses.
[0016.233] I> MB1 (prd-version: 1.5.1.6-t194-41334769-1740dd39)
[0016.239] I> Boot-mode: RCM
[0016.241] I> Chip revision : A02P
[0016.245] I> Bootrom patch version : 15 (correctly patched)
[0016.250] I> ATE fuse revision : 0x200
[0016.253] I> Ram repair fuse : 0x0
[0016.256] I> Ram Code : 0x0
[0016.259] I> rst_source : 0xb
[0016.262] I> rst_level : 0x1
[0016.265] I> USB configuration success
[0018.256] I> bct_bootrom image downloaded
[0018.264] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT.
[0018.271] I> Temperature = 35500
[0018.274] W> Skipping boost for clk: BPMP_CPU_NIC
[0018.278] W> Skipping boost for clk: BPMP_APB
[0018.282] W> Skipping boost for clk: AXI_CBB
[0018.286] W> Skipping boost for clk: AON_CPU_NIC
[0018.291] W> Skipping boost for clk: CAN1
[0018.294] W> Skipping boost for clk: CAN2
[0018.299] I> Boot-device: QSPI
[0018.301] I> Boot-device: QSPI
[0018.304] I> Qspi flash params source = mb1bct
[0018.308] I> bct_mb1 image downloaded
[0018.319] I> ECC region[0]: Start:0x0, End:0x0
[0018.323] I> ECC region[1]: Start:0x0, End:0x0
[0018.327] I> ECC region[2]: Start:0x0, End:0x0
[0018.331] I> ECC region[3]: Start:0x0, End:0x0
[0018.335] I> ECC region[4]: Start:0x0, End:0x0
[0018.339] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000
[0018.345] I> Non-ECC region[1]: Start:0x0, End:0x0
[0018.350] I> Non-ECC region[2]: Start:0x0, End:0x0
[0018.354] I> Non-ECC region[3]: Start:0x0, End:0x0
[0018.359] I> Non-ECC region[4]: Start:0x0, End:0x0
[0018.365] E> FAILED: Thermal config
[0018.372] E> FAILED:[0018.886] E> NV3P: Failed to verify checksum.
[0018.890] E> NV3P: Failed to receive data packet of size 1048576.
[0018.896] E> NV3P_SERVER: Failed to receive data of size 5723960 from host.