[0000.196] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c760bd83) [0000.205] I> Boot-device: eMMC [0000.212] I> sdmmc bdev is already initialized [0000.217] I> pmic: reset reason (nverc) : 0x0 [0000.250] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.270] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.276] I> A/B: bin_type (16) slot 0 [0000.279] I> Loading partition bpmp-fw at 0xd7800000 [0000.284] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.290] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.315] I> Binary(16) of size 534416 is loaded @ 0xd7800000 [0000.320] I> A/B: bin_type (17) slot 0 [0000.324] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.329] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.335] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.360] I> Binary(17) of size 604720 is loaded @ 0xd796c400 [0000.591] I> Loading SCE-FW ... [0000.594] I> A/B: bin_type (12) slot 0 [0000.598] I> Loading partition sce-fw at 0xd7300000 [0000.603] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.608] I> Addr: 0xd7300000, start-block: 58784120, num_blocks: 1 [0000.627] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.633] I> Init SCE [0000.635] I> Loading APE-FW ... [0000.638] I> A/B: bin_type (11) slot 0 [0000.642] I> Loading partition adsp-fw at 0xd7400000 [0000.647] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.652] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.671] I> Binary(11) of size 77216 is loaded @ 0xd7400000 [0000.677] I> Copy BTCM section [0000.680] I> A/B: bin_type (13) slot 0 [0000.683] I> Loading partition cpu-bootloader at 0x96000000 [0000.689] I> Reading two headers - addr:0x96000000 blocks:1 [0000.694] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.715] I> Binary(13) of size 302736 is loaded @ 0x96000000 [0000.721] I> A/B: bin_type (20) slot 0 [0000.725] I> Loading partition bootloader-dtb at 0x85205400 [0000.730] I> Reading two headers - addr:0x85205400 blocks:1 [0000.735] I> Addr: 0x85205400, start-block: 58742792, num_blocks: 1 [0000.757] I> Binary(20) of size 374528 is loaded @ 0x85205400 [0000.763] I> A/B: bin_type (14) slot 0 [0000.767] I> Loading partition secure-os at 0x85305600 [0000.772] I> Reading two headers - addr:0x85305600 blocks:1 [0000.777] I> Addr: 0x85305600, start-block: 58744840, num_blocks: 1 [0000.799] I> Binary(14) of size 394672 is loaded @ 0x85305600 [0000.807] I> TOS boot-params @ 0x85000000 [0000.811] I> TOS params prepared [0000.814] I> Loading EKS ... [0000.817] I> A/B: bin_type (15) slot 0 [0000.820] I> Loading partition eks at 0x85905800 [0000.825] I> Reading two headers - addr:0x85905800 blocks:1 [0000.830] I> Addr: 0x85905800, start-block: 58757128, num_blocks: 1 [0000.849] I> Binary(15) of size 1040 is loaded @ 0x85905800 [0000.855] I> EKB detected (length: 0x400) @ 0x85905800 [0000.860] I> Copied encrypted keys [0000.863] I> boot profiler @ 0x275844000 [0000.867] I> boot profiler for TOS @ 0x275844000 [0000.872] I> Unhalting SCE [0000.875] I> Primary Memory Start:80000000 Size:70000000 [0000.880] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.887] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):5b49e7f80 NOTICE: BL31: Built : 11:27:00, Jun 14 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 197: key_mgnt_processing ....... hwkey-agent: 189: Setting EKB key 0 to slot 14 hwkey-agent: 167: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete [0001.229] I> Welcome to Cboot [0001.232] I> Cboot Version: t186-747521d4 [0001.236] I> CPU-BL Params @ 0x275800000 [0001.239] I> 0) Base:0x00000000 Size:0x00000000 [0001.244] I> 1) Base:0x277f00000 Size:0x00100000 [0001.248] I> 2) Base:0x277e00000 Size:0x00100000 [0001.253] I> 3) Base:0x277d00000 Size:0x00100000 [0001.257] I> 4) Base:0x277c00000 Size:0x00100000 [0001.262] I> 5) Base:0x277b00000 Size:0x00100000 [0001.266] I> 6) Base:0x277800000 Size:0x00200000 [0001.271] I> 7) Base:0x277400000 Size:0x00400000 [0001.275] I> 8) Base:0x277a00000 Size:0x00100000 [0001.280] I> 9) Base:0x277300000 Size:0x00100000 [0001.285] I> 10) Base:0x276800000 Size:0x00800000 [0001.289] I> 11) Base:0x30000000 Size:0x00040000 [0001.293] I> 12) Base:0xf0000000 Size:0x00100000 [0001.298] I> 13) Base:0x30040000 Size:0x00001000 [0001.302] I> 14) Base:0x30048000 Size:0x00001000 [0001.307] I> 15) Base:0x30049000 Size:0x00001000 [0001.311] I> 16) Base:0x3004a000 Size:0x00001000 [0001.316] I> 17) Base:0x3004b000 Size:0x00001000 [0001.320] I> 18) Base:0x3004c000 Size:0x00001000 [0001.324] I> 19) Base:0x3004d000 Size:0x00001000 [0001.329] I> 20) Base:0x3004e000 Size:0x00001000 [0001.333] I> 21) Base:0x3004f000 Size:0x00001000 [0001.338] I> 22) Base:0x00000000 Size:0x00000000 [0001.342] I> 23) Base:0xf0100000 Size:0x00010000 [0001.347] I> 24) Base:0x00000000 Size:0x00000000 [0001.351] I> 25) Base:0x00000000 Size:0x00000000 [0001.355] I> 26) Base:0x00000000 Size:0x00000000 [0001.360] I> 27) Base:0x00000000 Size:0x00000000 [0001.364] I> 28) Base:0x84400000 Size:0x00400000 [0001.369] I> 29) Base:0x30000000 Size:0x00010000 [0001.373] I> 30) Base:0x278000000 Size:0x08000000 [0001.378] I> 31) Base:0x00000000 Size:0x00000000 [0001.382] I> 32) Base:0x276000000 Size:0x00600000 [0001.387] I> 33) Base:0x80000000 Size:0x70000000 [0001.391] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.396] I> 35) Base:0x00000000 Size:0x00000000 [0001.400] I> 36) Base:0x00000000 Size:0x00000000 [0001.404] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.409] I> 38) Base:0x84000000 Size:0x00400000 [0001.413] I> 39) Base:0x96000000 Size:0x02000000 [0001.418] I> 40) Base:0x85000000 Size:0x01200000 [0001.422] I> 41) Base:0x275800000 Size:0x00500000 [0001.427] I> 42) Base:0x00000000 Size:0x00000000 [0001.431] I> 43) Base:0x00000000 Size:0x00000000 [0001.436] GIC-SPI Target CPU: 4 [0001.439] Interrupts Init done [0001.442] calling constructors [0001.445] initializing heap [0001.448] initializing threads [0001.451] initializing timers [0001.454] creating bootstrap completion thread [0001.459] top of bootstrap2() [0001.462] CPU: ARM Cortex A57 [0001.465] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.470] initializing platform [0001.474] I> Bl_dtb @0x85205400 [0001.477] I> gpio framework initialized [0001.483] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.493] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.501] I> GPIO framework and drivers are initialized. [0001.506] I> Boot-device: eMMC [0001.513] I> sdmmc bdev is already initialized [0001.544] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.561] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.567] W> opt-in fuse is not set, skip fuse_burning [0001.572] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.584] I> A/B: bin_type (21) slot 0 [0001.587] I> Loading kernel-dtb from partition [0001.591] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.609] I> Kernel_dtb @0x80000000 [0001.612] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.622] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.629] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.638] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.649] I> fixed regulator driver initialized [0001.681] I> register 'maxim' power off handle [0001.687] I> virtual i2c enabled [0001.690] I> registered 'maxim,max77620' pmic [0001.695] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.708] I> Find /i2c@c250000's alias i2c7 [0001.712] I> Reading eeprom i2c=7 address=0x50 [0001.741] I> Device at /i2c@c250000:0x50 [0001.745] I> Reading eeprom i2c=7 address=0x57 [0001.749] E> I2C: slave not found in slaves. [0001.754] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.761] E> I2C_DEV: Failed to send register address 0x00000000. [0001.767] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.777] E> eeprom: Failed to read I2C slave device [0001.781] I> Eeprom read failed 0x3526070d [0001.786] I> Find /i2c@c240000's alias i2c1 [0001.790] I> Reading eeprom i2c=1 address=0x51 [0001.795] E> I2C: slave not found in slaves. [0001.799] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.807] E> I2C_DEV: Failed to send register address 0x00000000. [0001.813] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.822] E> eeprom: Retry to read I2C slave device. [0001.827] E> I2C: slave not found in slaves. [0001.831] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.839] E> I2C_DEV: Failed to send register address 0x00000000. [0001.845] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.854] E> eeprom: Failed to read I2C slave device [0001.859] I> Eeprom read failed 0x3526070d [0001.864] I> Find /i2c@3160000's alias i2c0 [0001.868] I> Reading eeprom i2c=0 address=0x50 [0001.872] E> I2C: slave not found in slaves. [0001.876] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.884] E> I2C_DEV: Failed to send register address 0x00000000. [0001.890] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.899] E> eeprom: Failed to read I2C slave device [0001.904] I> Eeprom read failed 0x3526070d [0001.909] I> Find /i2c@3180000's alias i2c2 [0001.913] I> Reading eeprom i2c=2 address=0x54 [0001.917] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.923] E> I2C: slave not found in slaves. [0001.928] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.935] E> I2C_DEV: Failed to send register address 0x00000000. [0001.941] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.951] E> eeprom: Failed to read I2C slave device [0001.955] I> Disabling gpio chip_id = 2, gpio pin = 9 [0001.961] I> Eeprom read failed 0x00000000 [0001.965] I> Reading eeprom i2c=2 address=0x57 [0001.969] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.974] E> I2C: slave not found in slaves. [0001.979] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.986] E> I2C_DEV: Failed to send register address 0x00000000. [0001.992] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0002.002] E> eeprom: Failed to read I2C slave device [0002.006] I> Disabling gpio chip_id = 2, gpio pin = 9 [0002.012] I> Eeprom read failed 0x00000000 [0002.015] I> create_pm_ids: id: 3310-1000-D02-K, len: 15 [0002.021] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.055] I> enabling 'vdd-hdmi' regulator [0002.071] I> regulator 'vdd-hdmi' already enabled [0002.075] I> hdmi cable connected [0002.084] I> setting 'vdd-pex-1v00' regulator to 1000000 micro volts [0002.096] I> setting 'vdd-1v8' regulator to 1800000 micro volts [0002.104] E> cannot find any other nvdisp nodes [0002.126] I> edid read success [0002.141] I> edid read success [0002.144] I> This is not a CEA-extension block! [0002.148] I> width = 640, height = 480, frequency = 25174825 [0002.153] I> width = 640, height = 480, frequency = 25174825 [0002.159] I> width = 640, height = 480, frequency = 25174825 [0002.164] I> width = 640, height = 480, frequency = 25174825 [0002.170] I> width = 1920, height = 1080, frequency = 148500000 [0002.176] I> Best mode Width = 640, Height = 480, freq = 25174825 [0002.185] I> hdmi_enable, starting HDMI initialisation [0002.193] I> hdmi_enable, HDMI initialisation complete [0002.199] initializing target [0002.202] calling apps_init() [0002.206] starting app kernel_boot_app [0002.228] I> found decompressor handler: lz4-legacy [0002.232] I> decompressing BMP blob ... [0002.245] I> Kernel type = Normal [0002.248] I> Loading kernel-bootctrl from partition [0002.253] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0002.267] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0002.274] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0002.281] I> ########## Fixed storage boot ########## [0002.285] I> A/B: bin_type (24) slot 0 [0002.301] I> Boot image size read from image header: 97dcd [0002.306] I> Boot image load address: 0x80400000 [0002.311] I> Loading kernel from partition [0002.315] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.257] I> Validate kernel ... [0003.260] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0003.268] I> Checking boot.img header magic ... [0003.272] I> [OK] [0003.274] I> kernel-dtb is already loaded [0003.278] I> Validate kernel-dtb ... [0003.281] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0003.289] I> Kernel hdr @0x80400000 [0003.292] I> Kernel dtb @0x80000000 [0003.295] I> decompressor handler not found [0003.299] I> Copying kernel image (622029 bytes) from 0x80400800 to 0x80600000 ... [0003.307] I> Done [0003.309] I> Move ramdisk (len: 0) from 0x80498800 to 0x947d0000 [0003.316] I> Updated bpmp info to DTB [0003.321] I> Ramdisk: Base: 0x947d0000; Size: 0x0 [0003.326] I> Updated initrd info to DTB [0003.330] W> WARN: Fail to override "console=none" in commandline [0003.336] I> Active rootfs suffix: [0003.339] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.346] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.353] I> disabled_core_mask: 0xffffff0c [0003.357] I> Active slot suffix: [0003.360] I> add_boot_slot_suffix: slot_suffix = [0003.365] I> Linux Cmdline: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200 n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt rootfs.slot_suffix= tegra_fbmem2=0x140000@0x96086000 lut_mem2=0x2008@0x96083000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_p rof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0003.418] I> Updated bootarg info to DTB [0003.421] I> eeprom_get_mac_addr: MAC (type: 0): 48:b0:2d:1b:a8:71 [0003.428] I> eeprom_get_mac_addr: MAC (type: 1): 48:b0:2d:1b:a8:72 [0003.434] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:1b:a8:73 [0003.440] E> Found no plugin manager ids in source DT [0003.445] W> Add plugin manager ids from board info [0003.450] W> "plugin-manager" doesn't exist, creating [0003.455] W> "ids" doesn't exist, creating [0003.459] W> "connection" doesn't exist, creating [0003.463] W> "configs" doesn't exist, creating [0003.468] I> create_pm_ids: id: 3310-1000-D02-K, len: 15 [0003.473] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.484] I> Adding plugin-manager/ids/3310-1000-D02=/i2c@c250000:module@0x50 [0003.491] W> "i2c@c250000" doesn't exist, creating [0003.496] W> "module@0x50" doesn't exist, creating [0003.502] I> Adding plugin-manager/ids/3310-1000-D02-K [0003.509] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.514] I> Adding plugin-manager/configs/3310-power-config 00 [0003.520] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.526] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.532] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.538] I> Adding plugin-manager/configs/3310-display-config 00 [0003.544] I> Adding plugin-manager/cvm [0003.548] W> "chip-id" doesn't exist, creating [0003.552] I> Adding plugin-manager/chip-id/A02P [0003.557] W> "odm-data" doesn't exist, creating [0003.561] I> Adding /chosen/plugin-manager/odm-data [0003.570] I> added [base:0x80000000, size:0x70000000] to /memory [0003.576] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.582] I> added [base:0x275e00000, size:0x200000] to /memory [0003.588] I> added [base:0x276600000, size:0x200000] to /memory [0003.594] I> added [base:0x277000000, size:0x200000] to /memory [0003.599] I> Updated memory info to DTB [0003.604] E> add_disp_param: failed to get display params for du=1 [0003.611] W> "reset" doesn't exist, creating [0003.615] W> "pmc-reset-reason" doesn't exist, creating [0003.621] W> "pmic-reset-reason" doesn't exist, creating [0003.627] I> Adding ecid(00000001647dd6441800000012010180) to DT [0003.633] I> disabled_core_mask: 0xffffff0c [0003.645] I> Add serial number:1420221002061 as DT property [0003.653] I> Plugin-manager override starting [0003.659] I> node /plugin-manager/fragement@0 matches [0003.669] I> node /plugin-manager/fragement@4 matches [0003.682] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.701] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.710] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.719] I> node /plugin-manager/fragment-devslp@0 matches [0003.730] I> node /plugin-manager/fragment-500-pcie-config matches [0003.744] I> node /plugin-manager/fragment-500-xusb-config matches [0003.766] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.779] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.789] I> node /plugin-manager/fragment-p3310-c01 matches [0003.802] I> node /plugin-manager/fragment-p3310-c03 matches [0003.831] I> Disable plugin-manager status in FDT [0003.836] I> Plugin-manager override finished successfully [0003.841] I> tegrabl_load_kernel_and_dtb: Done [0003.875] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2020.04-g1290f21 (Jun 17 2021 - 15:56:34 +0800) SoC: tegra186 Model: NVIDIA P2771-0000-500 Board: NVIDIA P2771-0000 DRAM: 7.8 GiB MMC: sdhci@3400000: 1, sdhci@3460000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Warning: ethernet@2490000 using MAC address from ROM eth0: ethernet@2490000 Hit any key to stop autoboot: 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 1204 bytes read in 34 ms (34.2 KiB/s) L4T boot options 1: primary kernel 2: backup kernel Enter choice: 1: primary kernel Retrieving file: /boot/initrd 7236792 bytes read in 191 ms (36.1 MiB/s) Retrieving file: /boot/Image 34527240 bytes read in 836 ms (39.4 MiB/s) append: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon =map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt rootfs.slot_suffix= tegra_fbmem2=0x140000 @0x96086000 lut_mem2=0x2008@0x96083000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0 x275840000 sdhci_tegra.en_boot_part_access=1 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) Using Device Tree in place at 0000000080000000, end 00000000800595f1 copying carveout for /host1x@13e00000/display-hub@15200000/display@15200000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15210000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15220000... Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.201-tegra (root@nvidia-desktop) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) ) #50 SMP PREEMPT Tue Sep 7 14:58:52 IDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00140000@96086000 [ 0.000000] Found lut_mem2: 00002008@96083000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022645 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0 ,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt rootfs.slot_s uffix= tegra_fbmem2=0x140000@0x96086000 lut_mem2=0x2008@0x96083000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resi ze bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29392(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7276628K/8219380K available (15294K kernel code, 2934K rwdata, 6892K rodata, 8576K init, 609K bss, 189088K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009630000 ( 6912 KB) [ 0.000000] .init : 0xffffff8009630000 - 0xffffff8009e90000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e90000 - 0xffffff800a16d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a16d808 - 0xffffff800a205cbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009571] Console: colour dummy device 80x25 [ 0.014232] console [tty0] enabled [ 0.017786] bootconsole [uart8250] disabled [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.201-tegra (root@nvidia-desktop) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) ) #50 SMP PREEMPT Tue Sep 7 14:58:52 IDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00140000@96086000 [ 0.000000] Found lut_mem2: 00002008@96083000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022645 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0 ,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt rootfs.slot_s uffix= tegra_fbmem2=0x140000@0x96086000 lut_mem2=0x2008@0x96083000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resi ze bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29392(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7276628K/8219380K available (15294K kernel code, 2934K rwdata, 6892K rodata, 8576K init, 609K bss, 189088K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009630000 ( 6912 KB) [ 0.000000] .init : 0xffffff8009630000 - 0xffffff8009e90000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e90000 - 0xffffff800a16d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a16d808 - 0xffffff800a205cbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009571] Console: colour dummy device 80x25 [ 0.014232] console [tty0] enabled [ 0.017786] bootconsole [uart8250] disabled [ 0.022159] kmemleak: Kernel memory leak detector disabled [ 0.022174] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022188] pid_max: default: 32768 minimum: 301 [ 0.022501] Security Framework initialized [ 0.022660] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022669] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023268] ftrace: allocating 47237 entries in 185 pages [ 0.146624] sched-energy: Sched-energy-costs installed from DT [ 0.146643] ASID allocator initialised with 65536 entries [ 0.183500] tegra-id: chipid=21817. [ 0.183514] tegra-id: opt_subrevision=1. [ 0.183535] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.183547] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.183561] DTB Build time: Sep 7 2021 15:40:35 [ 0.230035] CPU1: Booted secondary processor [4e0f0030] [ 0.261663] CPU2: Booted secondary processor [4e0f0030] [ 0.293463] CPU3: Booted secondary processor [411fd073] [ 0.325447] CPU4: Booted secondary processor [411fd073] [ 0.357440] CPU5: Booted secondary processor [411fd073] [ 0.357499] Brought up 6 CPUs [ 0.357534] SMP: Total of 6 processors activated. [ 0.357546] CPU features: detected feature: 32-bit EL0 Support [ 0.358332] CPU: All CPU(s) started at EL2 [ 0.358383] alternatives: patching kernel code [ 0.361281] devtmpfs: initialized [ 0.396444] Initilizing CustomIPI irq domain [ 0.396674] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.396697] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.405617] pinctrl core: initialized pinctrl subsystem [ 0.405871] OS set in device tree is not L4T. [ 0.406046] regulator-dummy: no parameters [ 0.406189] Initializing plugin-manager [ 0.406251] Plugin module not found [ 0.406295] Plugin-manager status disabled [ 0.407929] NET: Registered protocol family 16 [ 0.408653] pstore: using zlib compression [ 0.408926] console [pstore-1] enabled [ 0.408937] pstore: Registered ramoops as persistent store backend [ 0.408949] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.417471] cpuidle: using governor menu [ 0.419086] bpmp: waiting for handshake [ 0.419102] bpmp: handshake completed [ 0.419127] bpmp: synchronizing channels [ 0.419142] bpmp: channels synchronized [ 0.419153] bpmp: mail init ok [ 0.421280] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.421297] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.421310] arm-smmu 12000000.iommu: stage 1 translation [ 0.421321] arm-smmu 12000000.iommu: stage 2 translation [ 0.421332] arm-smmu 12000000.iommu: nested translation [ 0.421347] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.421365] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.421382] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.421395] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.421407] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.423239] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e94000) [ 0.423267] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.425648] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.427400] Registering BPMP clocks... [ 0.427491] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.428260] Serial: AMBA PL011 UART driver [ 0.429390] tegra_powergate_init: DONE [ 0.429406] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.429427] DTB Build time: Sep 7 2021 15:40:35 [ 0.431350] Tegra reboot handler registered. [ 0.432728] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.432803] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.432825] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.432836] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.432847] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.433011] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.433035] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.433381] iommu: Adding device 3460000.sdhci to group 0 [ 0.434108] iommu: Adding device 3400000.sdhci to group 1 [ 0.435171] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.435194] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.435661] iommu: Adding device 3160000.i2c to group 3 [ 0.436117] iommu: Adding device c240000.i2c to group 4 [ 0.436470] iommu: Adding device 3180000.i2c to group 5 [ 0.436819] iommu: Adding device 3190000.i2c to group 6 [ 0.437258] iommu: Adding device 31b0000.i2c to group 7 [ 0.437625] iommu: Adding device 31c0000.i2c to group 8 [ 0.437981] iommu: Adding device c250000.i2c to group 9 [ 0.438329] iommu: Adding device 31e0000.i2c to group 10 [ 0.439818] iommu: Adding device 3210000.spi to group 11 [ 0.440175] iommu: Adding device c260000.spi to group 12 [ 0.440522] iommu: Adding device 3240000.spi to group 13 [ 0.441231] iommu: Adding device 3100000.serial to group 14 [ 0.441607] iommu: Adding device 3110000.serial to group 15 [ 0.441955] iommu: Adding device c280000.serial to group 16 [ 0.442303] iommu: Adding device 3130000.serial to group 17 [ 0.443712] iommu: Adding device 2490000.ether_qos to group 18 [ 0.443737] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.444419] iommu: Adding device b000000.rtcpu to group 19 [ 0.446752] iommu: Adding device 13e10000.host1x to group 20 [ 0.447083] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.447397] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.447726] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.448041] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.448356] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.448681] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.449009] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.449333] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.449842] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.450517] iommu: Adding device 15700000.vi to group 30 [ 0.450892] iommu: Adding device 15600000.isp to group 31 [ 0.451365] iommu: Adding device 15210000.nvdisplay to group 32 [ 0.451487] platform 15210000.nvdisplay: OF IOVA linear map 0x96086000 size (0x140000) [ 0.451518] platform 15210000.nvdisplay: OF IOVA linear map 0x96083000 size (0x2008) [ 0.452054] iommu: Adding device 15340000.vic to group 33 [ 0.452290] iommu: Adding device 154c0000.nvenc to group 34 [ 0.452515] iommu: Adding device 15480000.nvdec to group 35 [ 0.452883] iommu: Adding device 15380000.nvjpg to group 36 [ 0.453131] iommu: Adding device 15500000.tsec to group 37 [ 0.453361] iommu: Adding device 15100000.tsecb to group 38 [ 0.454081] iommu: Adding device 15810000.se to group 39 [ 0.454320] iommu: Adding device 15820000.se to group 40 [ 0.454552] iommu: Adding device 15830000.se to group 41 [ 0.454782] iommu: Adding device 15840000.se to group 42 [ 0.455685] iommu: Adding device smmu_test to group 43 [ 0.456318] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c10000 [ 0.456341] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c20000 [ 0.456361] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2c30000 [ 0.456380] mc: mapped MMIO address: 0xffffff800b130000 -> 0x2c40000 [ 0.456399] mc: mapped MMIO address: 0xffffff800b150000 -> 0x2c50000 [ 0.456415] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.456434] mc-err: mcerr ops are set to t18x [ 0.456588] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.457806] iommu: Adding device 3530000.xhci to group 44 [ 0.457833] arm-smmu: forcing sodev map for 3530000.xhci [ 0.458304] iommu: Adding device 3550000.xudc to group 45 [ 0.458326] arm-smmu: forcing sodev map for 3550000.xudc [ 0.459060] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.459079] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.459093] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.459750] iommu: Adding device 17000000.gp10b to group 46 [ 0.460835] tegra-reset 5000000.clock: registered 193 resets. [ 0.463171] iommu: Adding device d000000.bpmp to group 47 [ 0.463390] bpmp: ping status is 0 [ 0.463491] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.465848] bpmp d000000.bpmp: probe ok [ 0.469221] iommu: Adding device 2600000.dma to group 48 [ 0.470488] gpio gpiochip0: gpio-line-names specifies 180 line names but there are 192 lines on the chip [ 0.470999] GPIO line 461 (camera-control-output-high) hogged as output/high [ 0.471041] GPIO line 424 (wifi-enable) hogged as output/high [ 0.471080] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.471119] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.471289] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.475203] gpio gpiochip1: gpio-line-names specifies 60 line names but there are 64 lines on the chip [ 0.475334] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.475487] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.477219] iommu: Adding device 10003000.pcie-controller to group 49 [ 0.477246] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.477596] iommu: Adding device sound to group 50 [ 0.477982] iommu: Adding device 3510000.hda to group 51 [ 0.485599] iommu: Adding device c1a0000.aon to group 52 [ 0.486067] vdd-ac-bat: 5000 mV [ 0.487747] vdd-1v8-ap: 1800 mV [ 0.517667] random: fast init done [ 0.517777] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.520514] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.520724] SCSI subsystem initialized [ 0.521016] usbcore: registered new interface driver usbfs [ 0.521061] usbcore: registered new interface driver hub [ 0.521118] usbcore: registered new device driver usb [ 0.524274] GPIO line 241 (touch-rails) hogged as output/high [ 0.524706] GPIO line 242 (touch-rails) hogged as output/high [ 0.524870] gpiochip_setup_dev: registered GPIOs 240 to 255 on device: gpiochip2 (tca9539) [ 0.526276] GPIO line 228 (lcd-bias-rails) hogged as output/high [ 0.526424] gpiochip_setup_dev: registered GPIOs 224 to 239 on device: gpiochip3 (tca9539) [ 0.536460] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.541305] vddio-ddr: at 1125 mV [ 0.545045] avdd_dsi_csi: 1200 mV [ 0.549049] vdd-1v8: 1800 mV [ 0.553044] vdd-3v3-sys: 3300 mV [ 0.554197] spmic-ldo0: at 1800 mV [ 0.554921] spmic-ldo1: at 800 mV [ 0.557051] vddio-3v3: 3300 mV [ 0.557798] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.561047] vdd-rtc: at 800 mV [ 0.561813] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.565074] spmic-ldo6: at 1500 mV [ 0.569043] vdd-pex-1v00: 1000 mV [ 0.569687] dvdd-pex: 1000 mV [ 0.571900] GPIO line 221 (spmic_gpio_input) hogged as input [ 0.572064] GPIO line 222 (spmic_gpio_input) hogged as input [ 0.572228] gpiochip_setup_dev: registered GPIOs 216 to 223 on device: gpiochip4 (max77620-gpio) [ 0.572421] max77620 4-003c: max77620 probe successful [ 0.572811] media: Linux media interface: v0.10 [ 0.572850] Linux video capture interface: v2.00 [ 0.575379] pps_core: LinuxPPS API ver. 1 registered [ 0.575395] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.575424] PTP clock support registered [ 0.575615] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.575829] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.575858] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.577267] trusty trusty: trusty version: Built: 11:31:50 Jun 14 2021 [ 0.577297] trusty trusty: selected api version: 3 (requested 3) [ 0.578156] Advanced Linux Sound Architecture Driver Initialized. [ 0.578477] Bluetooth: Core ver 2.22 [ 0.578513] NET: Registered protocol family 31 [ 0.578525] Bluetooth: HCI device and connection manager initialized [ 0.578540] Bluetooth: HCI socket layer initialized [ 0.578553] Bluetooth: L2CAP socket layer initialized [ 0.578573] Bluetooth: SCO socket layer initialized [ 0.579301] en-vdd-sd: 3300 mV [ 0.579995] en-vdd-cam: 1800 mV [ 0.581470] vdd-hdmi: 5000 mV [ 0.581803] vdd-usb0-5v: 5000 mV [ 0.582094] vdd-usb1-5v: 5000 mV [ 0.585460] en-vdd-ts-1v8: 1800 mV [ 0.589499] en-vdd-ts-hv-3v3: 3300 mV [ 0.590164] en-vdd-disp-3v3: 3300 mV [ 0.590825] en-mdm-pwr-3v7: 3700 mV [ 0.591482] en-vdd-disp-1v8: 1800 mV [ 0.592137] en-vdd-cam-hv-2v8: 2800 mV [ 0.592805] en-vdd-cam-1v2: 1200 mV [ 0.593523] vdd-fan: 5000 mV [ 0.593779] vdd-3v3: 3300 mV [ 0.594687] dis-vdd-1v2: 1200 mV [ 0.594953] en-vdd-vcm-2v8: 2800 mV [ 0.595662] vdd-usb2-5v: 5000 mV [ 0.595924] vdd-sys-bl: 3300 mV [ 0.596619] en-vdd-sys: 1200 mV [ 0.598734] camchar: rtcpu character device driver loaded [ 0.599290] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.601024] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.601841] clocksource: Switched to clocksource arch_sys_counter [ 0.624076] VFS: Disk quotas dquot_6.6.0 [ 0.624169] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.624418] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.624961] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.625083] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.625098] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.625116] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.625133] nvmap_page_pool_init: Total RAM pages: 2007573 [ 0.625145] nvmap_page_pool_init: nvmap page pool size: 250946 pages (980 MB) [ 0.625201] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.625657] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.627624] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.633461] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.633651] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.634099] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.634190] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.634310] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.634426] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.634600] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.634815] la/ptsa driver initialized. [ 0.634833] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.634844] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.635152] NET: Registered protocol family 2 [ 0.635775] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.636100] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.636708] TCP: Hash tables configured (established 65536 bind 65536) [ 0.636768] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.636896] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.637289] NET: Registered protocol family 1 [ 0.637669] RPC: Registered named UNIX socket transport module. [ 0.637683] RPC: Registered udp transport module. [ 0.637694] RPC: Registered tcp transport module. [ 0.637704] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.637829] Trying to unpack rootfs image as initramfs... [ 0.846365] Freeing initrd memory: 7064K [ 0.862090] host1x 13e10000.host1x: initialized [ 0.863278] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.865417] audit: initializing netlink subsys (disabled) [ 0.865454] audit: type=2000 audit(0.748:1): initialized [ 0.865916] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.872418] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.873410] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.873942] 9p: Installing v9fs 9p2000 file system support [ 0.876059] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.876154] io scheduler noop registered [ 0.876363] io scheduler cfq registered (default) [ 0.879667] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.985785] iommu: Adding device aconnect@2a41000:adsp_audio to group 53 [ 1.020851] iommu: Adding device 2993000.adsp to group 54 [ 1.021918] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.024535] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 1.028194] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.029397] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 1.030463] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 1.031537] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.034005] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 1.034977] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 1.035325] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 1.035428] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.035552] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 1.035573] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1000000, vi_iso_bw=4500000, max_bw=4500000 [ 1.037561] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 1.038690] tsec 15500000.tsec: initialized [ 1.039735] tsec 15100000.tsecb: initialized [ 1.042857] nvdec 15480000.nvdec: initialized [ 1.048356] falcon 15340000.vic: initialized [ 1.049749] falcon 154c0000.nvenc: initialized [ 1.051028] falcon 15380000.nvjpg: initialized [ 1.052874] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.054319] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.055758] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.057179] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.058647] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.060084] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.061505] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.062983] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.066138] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.066159] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.066196] tegradccommon 15200000.dc_common: dma mapping done [ 1.066375] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=390 [ 1.066458] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.066675] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.066773] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.066846] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.066861] tegra_cec 3960000.tegra_cec: probed [ 1.066927] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 1.066996] generic_infoframe_type: 0x87 [ 1.067101] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.067134] tegradc 15210000.nvdisplay: Display dc.ffffff800b3e0000 registered with id=0 [ 1.075550] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 1.075570] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 1.075588] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 1.075778] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 1.075796] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 1.077077] tegradc 15210000.nvdisplay: Bootloader disp_param detected. Detected mode: 640x480 (on 0x0mm) pclk=50347983 [ 1.079953] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.079974] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.082558] tegradc 15210000.nvdisplay: probed [ 1.083698] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.084499] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.084546] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.084987] kfuse 3830000.kfuse: initialized [ 1.086435] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.089353] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.091718] console [ttyS0] disabled [ 1.091767] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 1.467571] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.871860] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.093959] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 2.093962] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.276133] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.278151] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.680418] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.084685] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.488955] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.490973] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.534328] console [ttyS0] enabled [ 3.534540] Console: switching to colour frame buffer device 80x30 [ 3.535766] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 3.538687] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 3.538873] serial-tegra 3130000.serial: RX in PIO mode [ 3.539616] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 3.545259] [drm] Initialized [ 3.566149] brd: module loaded [ 3.580059] loop: module loaded [ 3.580119] tegra_profiler: version: 1.143, samples/io: 48/28 [ 3.580202] tegra_profiler: auth: init [ 3.580551] nct1008_nct72 7-004c: starting parse dt [ 3.580652] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 3.580656] nct1008_nct72 7-004c: success parsing dt [ 3.580756] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 3.581120] THERMAL EST: found 3 subdevs [ 3.581123] THERMAL EST num_resources: 0 [ 3.581127] [THERMAL EST subdev 0] [ 3.581131] [THERMAL EST subdev 1] [ 3.581134] [THERMAL EST subdev 2] [ 3.581382] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 3.581384] THERMAL EST: thz register success. [ 3.581469] THERMAL EST: end of probe, return err: 0 [ 3.582167] sd: No Scsi addr parsed to reserve index [ 3.582189] hisi_sas: driver version v1.6 [ 3.585568] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 3.585574] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 3.586315] scsi host0: tegra_ahci [ 3.586695] scsi host1: tegra_ahci [ 3.586839] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 3.586841] ata2: DUMMY [ 3.594632] libphy: Fixed MDIO Bus: probed [ 3.595064] tun: Universal TUN/TAP device driver, 1.6 [ 3.595066] tun: (C) 1999-2004 Max Krasnyansky [ 3.595685] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.595686] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.595713] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.595715] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.595740] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.595742] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.595767] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 3.595769] Copyright(c) 1999 - 2017 Intel Corporation. [ 3.601949] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 3.604280] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 3.604732] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 1b a8 73 [ 3.604830] libphy: dwc_phy: probed [ 3.605111] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 3.606947] PPP generic driver version 2.4.2 [ 3.607061] PPP BSD Compression module registered [ 3.607063] PPP Deflate Compression module registered [ 3.607076] PPP MPPE Compression module registered [ 3.607079] NET: Registered protocol family 24 [ 3.607117] usbcore: registered new interface driver r8152 [ 3.607149] usbcore: registered new interface driver asix [ 3.607176] usbcore: registered new interface driver ax88179_178a [ 3.607201] usbcore: registered new interface driver cdc_ether [ 3.607229] usbcore: registered new interface driver net1080 [ 3.607253] usbcore: registered new interface driver cdc_subset [ 3.607277] usbcore: registered new interface driver zaurus [ 3.607316] usbcore: registered new interface driver cdc_ncm [ 3.607425] VFIO - User Level meta-driver version: 0.3 [ 3.610528] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.610538] ehci-pci: EHCI PCI platform driver [ 3.610565] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.610570] ohci-pci: OHCI PCI platform driver [ 3.610596] ohci-platform: OHCI generic platform driver [ 3.613209] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 3.613712] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 3.615681] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 3.617310] tegra-xusb 3530000.xhci: extcon 0: ffffffc1eb2ff800 id [ 3.618012] usbcore: registered new interface driver uas [ 3.618047] usbcore: registered new interface driver usb-storage [ 3.618095] usbcore: registered new interface driver usbserial [ 3.619664] tegra-xusb 3530000.xhci: Firmware timestamp: 2019-10-31 05:52:15 UTC, Version: 55.17 release [ 3.622715] tegra-xudc-new 3550000.xudc: device count: 1 [ 3.623769] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 3.646023] nct1008_nct72 7-004c: initial LOC temp: 38000 [ 3.646325] nct1008_nct72 7-004c: initial EXT temp: 51750 [ 3.646387] tegra-xusb 3530000.xhci: xHCI Host Controller [ 3.646402] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 3.646929] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 3.647104] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 3.647132] tegra-xusb 3530000.xhci: irq 70, io mem 0x03530000 [ 3.647226] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 3.647267] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.647271] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.647274] usb usb1: Product: xHCI Host Controller [ 3.647277] usb usb1: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 3.647279] usb usb1: SerialNumber: 3530000.xhci [ 3.647425] nct1008_nct72 7-004c: nct1008_probe: initialized [ 3.647838] hub 1-0:1.0: USB hub found [ 3.647868] hub 1-0:1.0: 4 ports detected [ 3.648444] tegra-xusb 3530000.xhci: xHCI Host Controller [ 3.648451] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 3.648614] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.648618] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.648621] usb usb2: Product: xHCI Host Controller [ 3.648623] usb usb2: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 3.648626] usb usb2: SerialNumber: 3530000.xhci [ 3.648906] hub 2-0:1.0: USB hub found [ 3.649017] hub 2-0:1.0: 3 ports detected [ 3.649465] Wake76 for irq=199 [ 3.649466] Wake77 for irq=199 [ 3.649468] Wake78 for irq=199 [ 3.649469] Wake79 for irq=199 [ 3.649470] Wake80 for irq=199 [ 3.649471] Wake81 for irq=199 [ 3.649472] Wake82 for irq=199 [ 3.649502] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 3.649506] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 3.695227] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.695483] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.750103] usb usb2: usb_suspend_both: status 0 [ 3.785901] tegra-usb-cd usb_cd: notification status (0x0, 0x1) [ 3.785904] tegra-usb-cd usb_cd: connected to SDP [ 3.785913] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 3.785928] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 3.786437] mousedev: PS/2 mouse device common for all mice [ 3.786495] usbcore: registered new interface driver xpad [ 3.899159] ata1: SATA link down (SStatus 0 SControl 300) [ 3.915522] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.916593] Wake73 for irq=42 [ 3.917859] rtc rtc1: alarm rtc device [ 3.917869] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 3.917883] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.918052] i2c /dev entries driver [ 3.919222] imx185 2-0036: probing v4l2 sensor [ 3.919661] imx185 2-0036: sensor_common_parse_control_props:min_gain_val:property missing [ 3.919692] imx185 2-0036: tegracam sensor driver:imx185_v2.0.6 [ 3.920148] imx185 2-0036: Detected IMX185 sensor [ 3.920206] imx185 2-0037: probing v4l2 sensor [ 3.920387] imx185 2-0037: sensor_common_parse_control_props:min_gain_val:property missing [ 3.920410] imx185 2-0037: tegracam sensor driver:imx185_v2.0.6 [ 3.920804] imx185 2-0037: Detected IMX185 sensor [ 3.920845] imx185 2-0038: probing v4l2 sensor [ 3.921014] imx185 2-0038: sensor_common_parse_control_props:min_gain_val:property missing [ 3.921036] imx185 2-0038: tegracam sensor driver:imx185_v2.0.6 [ 3.921424] imx185 2-0038: Detected IMX185 sensor [ 3.921462] imx185 2-0039: probing v4l2 sensor [ 3.921642] imx185 2-0039: sensor_common_parse_control_props:min_gain_val:property missing [ 3.921663] imx185 2-0039: tegracam sensor driver:imx185_v2.0.6 [ 3.922054] imx185 2-0039: Detected IMX185 sensor [ 3.922094] imx185 2-0040: probing v4l2 sensor [ 3.922261] imx185 2-0040: sensor_common_parse_control_props:min_gain_val:property missing [ 3.922282] imx185 2-0040: tegracam sensor driver:imx185_v2.0.6 [ 3.922668] imx185 2-0040: Detected IMX185 sensor [ 3.922704] imx185 2-0041: probing v4l2 sensor [ 3.922881] imx185 2-0041: sensor_common_parse_control_props:min_gain_val:property missing [ 3.922902] imx185 2-0041: tegracam sensor driver:imx185_v2.0.6 [ 3.923290] imx185 2-0041: Detected IMX185 sensor [ 3.924346] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.929112] parse_throttle_dt_data: Num cap clks = 4 [ 3.929116] parse_throttle_dt_data: clk=mcpu type=1 [ 3.929119] parse_throttle_dt_data: clk=bcpu type=2 [ 3.929126] parse_throttle_dt_data: clk=gpu type=4 [ 3.929129] parse_throttle_dt_data: clk=emc type=3 [ 3.930135] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.930686] FAN dev name: pwm-fan [ 3.930749] FAN:gpio request success. [ 3.930757] FAN: can't find tach_gpio [ 3.930780] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 3.930968] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 3.930972] pwm_fan_driver pwm-fan: tach period: 1000 [ 3.931485] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 3.931488] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 3.931492] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 3.931495] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 3.931498] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 3.931501] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 3.931504] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 3.931507] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 3.931510] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 3.931513] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 3.932610] device-mapper: uevent: version 1.0.3 [ 3.932925] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.933172] CPU EMC frequency mapping table: default setting [ 3.939192] cpufreq: platform driver Initialization: pass [ 3.944487] cpuidle: Initializing cpuidle driver init for Denver cluster [ 3.944607] cpuidle: Initializing cpuidle driver init for A57 cluster [ 3.950271] sdhci: Secure Digital Host Controller Interface driver [ 3.950272] sdhci: Copyright(c) Pierre Ossman [ 3.950273] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.951446] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 3.953182] CMDQ: cmdq_platfm_init successful [ 3.954196] CQE: CMD_TIMING bit set for R1B DCMD [ 3.956714] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 3.962335] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 3.962385] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 3.964042] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 3.965721] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 257 [ 3.969993] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.981853] usb 1-3: new high-speed USB device number 2 using tegra-xusb [ 4.001853] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.001875] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.004373] usb 1-3: New USB device found, idVendor=8564, idProduct=4100 [ 4.004376] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.004379] usb 1-3: Product: USB2.1 Hub [ 4.004380] usb 1-3: Manufacturer: Transcend Info [ 4.005052] hub 1-3:1.0: USB hub found [ 4.005296] hub 1-3:1.0: 4 ports detected [ 4.013882] gpio tegra-gpio wake71 for gpio=125(P:5) [ 4.013922] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.055780] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 4.069965] mmc0: periodic cache flush enabled [ 4.069971] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 4.070300] mmcblk0: mmc0:0001 DG4032 29.1 GiB [ 4.074429] mmcblk0boot0: mmc0:0001 DG4032 partition 1 4.00 MiB [ 4.078553] mmcblk0boot1: mmc0:0001 DG4032 partition 2 4.00 MiB [ 4.082662] mmcblk0rpmb: mmc0:0001 DG4032 partition 3 4.00 MiB [ 4.087075] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 4.250747] mmc1: Applying tuning correction [ 4.250759] mmc1: Tap value after applying correction 64 [ 4.250765] mmc1: hw tuning done ... [ 4.254260] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 4.325848] usb 1-3.3: new low-speed USB device number 3 using tegra-xusb [ 4.350337] usb 1-3.3: New USB device found, idVendor=413c, idProduct=301a [ 4.350340] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.350343] usb 1-3.3: Product: Dell MS116 USB Optical Mouse [ 4.350344] usb 1-3.3: Manufacturer: PixArt [ 4.457850] usb 1-3.4: new low-speed USB device number 4 using tegra-xusb [ 4.485399] usb 1-3.4: New USB device found, idVendor=413c, idProduct=2107 [ 4.485402] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.485404] usb 1-3.4: Product: Dell USB Entry Keyboard [ 4.485406] usb 1-3.4: Manufacturer: Dell [ 4.808361] tegradc 15210000.nvdisplay: fb registered [ 4.813639] gpio tegra-gpio wake21 for gpio=121(P:1) [ 4.819035] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4.825107] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4.831167] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 4.838470] Parent Clock set for DC plld2 [ 4.898303] tegradc 15210000.nvdisplay: hdmi: tmds rate:50349K prod-setting:prod_c_hdmi_0m_54m [ 4.907371] tegradc 15210000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 4.915308] tegradc 15210000.nvdisplay: hdmi: BL set VIC 0 [ 4.920800] tegradc 15210000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 4.954752] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4.961987] Extcon AUX1(HDMI) enable [ 4.966379] tegra-se-nvhost 15810000.se: initialized [ 4.972462] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 4.979181] tegra-se-nvhost 15820000.se: initialized [ 4.985128] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 4.991829] tegra-se-nvhost 15830000.se: initialized [ 4.997574] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 5.004248] tegra-se-nvhost 15840000.se: initialized [ 5.010141] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 5.016473] hidraw: raw HID events driver (C) Jiri Kosina [ 5.024501] input: PixArt Dell MS116 USB Optical Mouse as /devices/3530000.xhci/usb1/1-3/1-3.3/1-3.3:1.0/0003:413C:301A.0001/input/input0 [ 5.037038] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-3530000.xhci-3.3/input0 [ 5.053726] input: Dell Dell USB Entry Keyboard as /devices/3530000.xhci/usb1/1-3/1-3.4/1-3.4:1.0/0003:413C:2107.0002/input/input1 [ 5.097583] tegradc 15210000.nvdisplay: blank - powerdown [ 5.122154] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-3530000.xhci-3.4/input0 [ 5.122214] usbcore: registered new interface driver usbhid [ 5.122215] usbhid: USB HID core driver [ 5.127925] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 5.130058] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 5.130286] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 5.130421] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 5.130664] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 5.131477] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 5.131552] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 5.131598] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 5.131642] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 5.131773] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 5.132144] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (51) [ 5.132147] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 5.132310] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 5.132312] Extcon AUX1(HDMI) disable [ 5.132715] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 5.134505] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 5.134935] tegra186-aondbg aondbg: aondbg driver probe() OK [ 5.135098] register_ari_mca_banks: Registered MCA ROC:IOB [ 5.135163] register_ari_mca_banks: Registered MCA ROC:CCE [ 5.135480] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.135482] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 5.135484] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 5.135539] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.135541] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 5.135542] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 5.135592] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.135594] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 5.135595] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 5.135644] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.135646] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 5.135648] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 5.135695] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.135697] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 5.135699] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 5.135747] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.135751] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 5.135753] tegra18-bridge 2100000.axip2p: bridge probed OK [ 5.135801] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.135806] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 5.135807] tegra18-bridge 2110000.axip2p: bridge probed OK [ 5.135856] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.135859] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 5.135861] tegra18-bridge 2120000.axip2p: bridge probed OK [ 5.135911] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.135916] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 5.135917] tegra18-bridge 2130000.axip2p: bridge probed OK [ 5.135964] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.135966] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 5.135968] tegra18-bridge 2140000.axip2p: bridge probed OK [ 5.136016] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.136020] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 5.136022] tegra18-bridge 2150000.axip2p: bridge probed OK [ 5.136069] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.136073] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 5.136075] tegra18-bridge 2160000.axip2p: bridge probed OK [ 5.136123] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.136127] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 5.136129] tegra18-bridge 2170000.axip2p: bridge probed OK [ 5.136176] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.136180] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 5.136182] tegra18-bridge 2180000.axip2p: bridge probed OK [ 5.136237] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.136241] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 5.136242] tegra18-bridge 2190000.axip2p: bridge probed OK [ 5.136298] **** A57 ECC: Enabled [ 5.136300] tegra18_a57_serr_init: on CPU 4 a A57 Core [ 5.136363] tegra18x_actmon d230000.actmon: in actmon_register()... [ 5.136813] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 5.137231] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 5.137351] denver_knobs_init:MTS_VERSION:47926945 [ 5.139252] nvpmodel: initialized successfully [ 5.140094] trusty-virtio trusty:virtio: initializing [ 5.140203] trusty_ipc virtio0: vring0: va(pa) ffffffc1e678a000(0) qsz 32 notifyid 1 [ 5.140210] trusty_ipc virtio0: vring1: va(pa) ffffffc1e679c000(0) qsz 32 notifyid 2 [ 5.140277] trusty-virtio trusty:virtio: initializing done [ 5.140382] trusty_ipc virtio0: is online [ 5.141816] usbcore: registered new interface driver snd-usb-audio [ 5.149336] snd_hda_codec_hdmi hdaudioC0D4: HDMI: Unknown ELD version 0 [ 5.151798] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input2 [ 5.151912] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input3 [ 5.154599] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 5.154683] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 5.155095] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 5.166616] tegradc 15210000.nvdisplay: unblank [ 5.167203] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 5.167286] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 5.167378] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 5.168606] Parent Clock set for DC plld2 [ 5.172062] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 5.211713] random: crng init done [ 5.223376] tegradc 15210000.nvdisplay: sync windows ret = 246 [ 5.245193] OPE platform probe [ 5.245263] OPE platform probe successful [ 6.014627] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 6.023244] Extcon HDMI: HPD enabled [ 6.028244] tegradc 15210000.nvdisplay: hdmi: plugged [ 6.085878] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 6.093116] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 6.100327] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 6.107499] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 6.114637] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 6.121763] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 6.128876] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 6.135980] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 6.143067] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 6.150123] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 6.157386] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 6.164620] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 6.171825] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 6.179033] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 6.186227] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 6.193381] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 6.200547] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 6.207695] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 6.214825] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 6.221943] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 6.247802] u32 classifier [ 6.251647] Actions configured [ 6.256215] Initializing XFRM netlink socket [ 6.262124] NET: Registered protocol family 10 [ 6.268273] NET: Registered protocol family 17 [ 6.273860] NET: Registered protocol family 15 [ 6.279435] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 6.293547] Bluetooth: RFCOMM socket layer initialized [ 6.299853] Bluetooth: RFCOMM ver 1.11 [ 6.304764] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 6.311798] Bluetooth: HIDP socket layer initialized [ 6.317933] 9pnet: Installing 9P2000 support [ 6.323384] Key type dns_resolver registered [ 6.328996] Registered cp15_barrier emulation handler [ 6.335251] Registered setend emulation handler [ 6.341827] registered taskstats version 1 [ 6.350470] isp 15600000.isp: initialized [ 6.359915] nvcsi 150c0000.nvcsi: initialized [ 6.367008] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 6.369486] Wake83 for irq=51 [ 6.369563] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 6.369637] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 6.369712] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 6.369879] input: gpio-keys as /devices/gpio-keys/input/input4 [ 6.405278] tegra_rtc c2a0000.rtc: setting system clock to 2021-09-07 13:00:19 UTC (1631019619) [ 6.406393] mmcblk mmc0:0001: Card claimed for testing. [ 6.424203] tegra-vi4 15700000.vi: initialized [ 6.430942] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--6 bound [ 6.435125] bpmp: mounted debugfs mirror [ 6.436327] bwmgr: missing cdev-type property [ 6.440755] ALSA device list: [ 6.440757] #0: tegra-hda at 0x3518000 irq 383 [ 6.440759] #1: tegra-snd-t186ref-mobile-rt565x [ 6.464374] tegra-vi4 15700000.vi: subdev imx185 2-0036 bound [ 6.471526] imx185 2-0036: camera_common_g_fmt++ [ 6.477618] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--5 bound [ 6.484888] tegra-vi4 15700000.vi: subdev imx185 2-0037 bound [ 6.491935] imx185 2-0037: camera_common_g_fmt++ [ 6.498015] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--4 bound [ 6.505309] tegra-vi4 15700000.vi: subdev imx185 2-0038 bound [ 6.512350] imx185 2-0038: camera_common_g_fmt++ [ 6.518390] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--3 bound [ 6.525632] tegra-vi4 15700000.vi: subdev imx185 2-0039 bound [ 6.532659] imx185 2-0039: camera_common_g_fmt++ [ 6.538688] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound [ 6.545921] tegra-vi4 15700000.vi: subdev imx185 2-0040 bound [ 6.552938] imx185 2-0040: camera_common_g_fmt++ [ 6.558987] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 6.566238] tegra-vi4 15700000.vi: subdev imx185 2-0041 bound [ 6.573283] imx185 2-0041: camera_common_g_fmt++ [ 6.582583] Freeing unused kernel memory: 8576K [ 6.609594] Root device found: mmcblk0p1 [ 6.615884] Found dev node: /dev/mmcblk0p1 [ 6.641012] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 6.652129] Rootfs mounted over mmcblk0p1 [ 6.677372] Switching from initrd to actual rootfs [ 6.800866] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.816120] cgroup: cgroup2: unknown option "nsdelegate" [ 6.834769] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BL KID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 6.859942] systemd[1]: Detected architecture arm64. [ 6.892148] systemd[1]: Set hostname to . [ 6.977078] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup base d firewalling. [ 6.995836] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 7.130297] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.143149] systemd[1]: Created slice User and Session Slice. [ 7.152567] systemd[1]: Reached target Swap. [ 7.161021] systemd[1]: Created slice System Slice. [ 7.169521] systemd[1]: Listening on udev Kernel Socket. [ 7.210100] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 7.257774] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.146714] using random self ethernet address [ 8.154681] using random host ethernet address [ 8.584992] Could not create tracefs 'imx185_s_stream' directory [ 8.638048] imx185: module is already loaded [ 8.702566] Could not create tracefs 'imx185_s_stream' directory [ 8.711983] imx185: module is already loaded [ 8.749598] using random self ethernet address [ 8.749600] using random host ethernet address [ 8.937065] Could not create tracefs 'imx185_s_stream' directory [ 8.944820] imx185: module is already loaded [ 9.022377] Could not create tracefs 'imx185_s_stream' directory [ 9.032336] imx185: module is already loaded [ 9.086396] Could not create tracefs 'imx185_s_stream' directory [ 9.094154] imx185: module is already loaded [ 9.154482] Could not create tracefs 'imx185_s_stream' directory [ 9.182051] imx185: module is already loaded [ 9.351754] CPU1: shutdown [ 9.400108] CPU2: shutdown [ 10.265308] Bridge firewalling registered Ubuntu 18.04.5 LTS nvidia-desktop ttyS0 nvidia-desktop login: