ÿâ [0000.188] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.196] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.202] I> Boot-mode: Coldboot [0000.205] I> Chip revision : A02 [0000.208] I> Bootrom patch version : 15 (correctly patched) [0000.213] I> ATE fuse revision : 0x200 [0000.216] I> Ram repair fuse : 0x0 [0000.219] I> Ram Code : 0x4 [0000.222] I> rst_source : 0x0 [0000.225] I> rst_level : 0x0 [0000.228] I> Boot-device: eMMC [0000.243] I> sdmmc DDR50 mode [0000.247] W> No valid slot number is found in scratch register [0000.253] W> Return default slot: _a [0000.256] I> Active Boot chain : 0 [0000.259] I> Boot-device: eMMC [0000.263] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.271] I> Temperature = 34000 [0000.274] W> Skipping boost for clk: BPMP_CPU_NIC [0000.278] W> Skipping boost for clk: BPMP_APB [0000.282] W> Skipping boost for clk: AXI_CBB [0000.286] W> Skipping boost for clk: AON_CPU_NIC [0000.290] W> Skipping boost for clk: CAN1 [0000.294] W> Skipping boost for clk: CAN2 [0000.298] I> Boot-device: eMMC [0000.301] I> Boot-device: eMMC [0000.310] I> Sdmmc: HS400 mode enabled [0000.315] I> ECC region[0]: Start:0x0, End:0x0 [0000.319] I> ECC region[1]: Start:0x0, End:0x0 [0000.323] I> ECC region[2]: Start:0x0, End:0x0 [0000.327] I> ECC region[3]: Start:0x0, End:0x0 [0000.331] I> ECC region[4]: Start:0x0, End:0x0 [0000.336] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.341] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.346] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.350] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.355] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.360] E> FAILED: Thermal config [0000.367] E> FAILED: MEMIO rail config [0000.379] I> Boot-device: eMMC [0000.389] I> sdmmc bdev is already initialized [0000.460] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ÿâ [0000.468] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-389501e9) [0000.469] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.469] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.470] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.476] W> device prod register failed [0000.480] I> Boot-device: eMMC [0000.482] I> Boot_device: SDMMC_BOOT instance: 3 [0000.488] I> sdmmc-3 params source = boot args [0000.491] I> sdmmc bdev is already initialized [0000.495] I> sdmmc-3 params source = boot args [0000.504] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.510] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.511] W> No valid slot number is found in scratch register [0000.516] W> Return default slot: _a [0000.520] I> Active Boot chain : 0 [0000.523] I> parsing oem signed section of bpmp-fw header done [0000.529] I> bpmp-fw binary init read from storage [0000.534] I> oem authentication of bpmp-fw header done [0000.540] I> bpmp-fw binary done read from storage [0000.543] I> bpmp-fw: Authentication init Done [0000.548] I> parsing oem signed section of cpubl header done [0000.553] I> cpubl binary init read from storage [0000.557] I> bpmp-fw: Authentication Finalize Done [0000.562] I> oem authentication of cpubl header done [0000.567] I> cpubl binary done read from storage [0000.571] I> cpubl: Authentication init Done [0000.576] I> parsing oem signed section of rce header done [0000.581] I> rce binary init read from storage [0000.585] I> Relocating BR-BCT [0000.588] I> cpubl: Authentication Finalize Done [0000.592] I> oem authentication of rce header done [0000.597] I> rce binary done read from storage [0000.601] I> rce: Authentication init Done [0000.606] I> parsing oem signed section of ape header done [0000.610] I> ape binary init read from storage [0000.615] I> rce: Authentication Finalize Done [0000.619] I> oem authentication of ape header done [0000.624] I> ape binary done read from storage [0000.628] I> ape: Authentication init Done [0000.633] I> parsing oem signed section of tos header done [0000.637] I> tos binary init read from storage [0000.641] I> ape: Authentication Finalize Done [0000.646] I> oem authentication of tos header done [0000.650] I> tos binary done read from storage [0000.655] I> tos: Authentication init Done [0000.659] I> parsing oem signed section of bpmp-fw-dtb header done [0000.665] I> bpmp-fw-dtb binary init read from storage [0000.670] I> tos: Authentication Finalize Done [0000.675] I> oem authentication of bpmp-fw-dtb header done [0000.679] I> bpmp-fw-dtb binary done read from storage [0000.684] I> bpmp-fw-dtb: Authentication init Done [0000.690] I> parsing oem signed section of cpubl-dtb header done [0000.695] I> cpubl-dtb binary init read from storage [0000.700] I> bpmp-fw-dtb: Authentication Finalize Done [0000.735] I> oem authentication of cpubl-dtb header done [0000.736] I> cpubl-dtb binary done read from storage [0000.737] I> cpubl-dtb: Authentication init Done [0000.739] I> parsing oem signed section of eks header done [0000.739] I> eks binary init read from storage [0000.740] I> cpubl-dtb: Authentication Finalize Done [0000.740] I> oem authentication of eks header done [0000.744] I> eks binary done read from storage [0000.748] I> eks: Authentication init Done [0000.752] I> eks: Authentication Finalize Done [0000.756] I> EKB detected (length: 0x410) @ VA:0x5270a400 ÿäNOTICE: BL31: v1.3(release):de895fd9e NOTICE: BL31: Built : 12:15:31, Oct 16 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete ÿâ welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 391 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform_init: bad clk id in clock@cluster1_avfs avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized ÿá [0001.161] I> Welcome to Cboot [0001.161] I> Cboot Version: t194-aad9d75eÿâWARNING: no registered clock for FMON_NAFLL_CLUSTER1 (id 281) fmon_post initialized ÿá [0001.163] I> CPU-BL Params @ 0xf2820000 [0001.166] I> 0) Base:0x00000000 Size:0x00000000 [0001.171] I> 1) Base:0xf1100000 Size:0x00100000 ÿâclk_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 clk_debugfs initialized emc_debugfs initialized ÿá[0001.175] I> 2) Base:0xf2000000 Size:0x00200000ÿâdvs_debugfs initialized fmon_debugfs_init_one: no clock debugfs node to attach FMON_NAFLL_CLUSTER1 fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ÿá [0001.348] I> 3) Base:0xf1200000 Size:0x00200000 [0001.352] I> 4) Base:0xf1000000 Size:0x00100000 [0001.357] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.361] I> 6) Base:0xf3800000 Size:0x00400000 [0001.366] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.370] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.374] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.379] I> 10) Base:0xf3000000 Size:0x00800000 [0001.383] I> 11) Base:0x40000000 Size:0x00040000 [0001.388] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.392] I> 13) Base:0x40046000 Size:0x00002000 [0001.397] I> 14) Base:0x40048000 Size:0x00002000 [0001.401] I> 15) Base:0xac000000 Size:0x00004000 [0001.406] I> 16) Base:0x4004a000 Size:0x00002000 [0001.410] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.415] I> 18) Base:0x4004c000 Size:0x00002000 [0001.419] I> 19) Base:0xf2200000 Size:0x00600000 [0001.424] I> 20) Base:0x4004e000 Size:0x00002000 [0001.428] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.432] I> 22) Base:0x00000000 Size:0x00000000 [0001.437] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.441] I> 24) Base:0xf6000000 Size:0x02000000 [0001.446] I> 25) Base:0x40050000 Size:0x00002000 [0001.450] I> 26) Base:0x40040000 Size:0x00006000 [0001.455] I> 27) Base:0xf1800000 Size:0x00400000 [0001.459] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.464] I> 29) Base:0xf1400000 Size:0x00400000 [0001.468] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.473] I> 31) Base:0x00000000 Size:0x00000000 [0001.477] I> 32) Base:0xf8000000 Size:0x08000000 [0001.482] I> 33) Base:0x00000000 Size:0x00000000 [0001.486] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.490] I> 35) Base:0xab000000 Size:0x01000000 [0001.495] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.499] I> 37) Base:0xf2800000 Size:0x00800000 [0001.504] I> 38) Base:0x80000000 Size:0x20000000 [0001.508] I> 39) Base:0xb0000000 Size:0x08000000 [0001.513] I> 40) Base:0x00000000 Size:0x00000000 [0001.517] I> 41) Base:0x00000000 Size:0x00000000 [0001.522] I> 42) Base:0x00000000 Size:0x00000000 [0001.526] I> 43) Base:0x00000000 Size:0x00000000 [0001.531] I> 44) Base:0x00000000 Size:0x00000000 [0001.535] I> 45) Base:0x00000000 Size:0x00000000 [0001.540] GIC-SPI Target CPU: 0 [0001.543] Interrupts Init done [0001.545] calling constructors [0001.548] initializing heap [0001.551] I> Heap: [0xa0691568 ... 0xab000000] [0001.555] initializing threads [0001.558] initializing timers [0001.561] creating bootstrap completion thread [0001.565] top of bootstrap2() [0001.568] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.573] initializing platform [0001.576] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.581] W> device prod register failed [0001.585] I> Bl_dtb @0xaaf00000 [0001.591] W> "plugin-manager" doesn't exist, creating [0001.593] W> "ids" doesn't exist, creating [0001.597] W> "connection" doesn't exist, creating [0001.601] W> "configs" doesn't exist, creating [0001.613] I> Find /i2c@3160000's alias i2c0 [0001.613] I> Reading eeprom i2c=0 address=0x50 [0001.639] I> Device at /i2c@3160000:0x50 [0001.639] I> Reading eeprom i2c=0 address=0x56 [0001.640] E> I2C: slave not found in slaves. [0001.640] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0001.641] E> I2C_DEV: Failed to send register address 0x00000000. [0001.642] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0001.649] E> eeprom: Failed to read I2C slave device [0001.654] I> Eeprom read failed 0x3526070d [0001.660] I> Find /i2c@3180000's alias i2c2 [0001.662] I> Reading eeprom i2c=2 address=0x54 [0001.667] E> I2C: slave not found in slaves. [0001.670] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.678] E> I2C_DEV: Failed to send register address 0x00000000. [0001.684] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.693] E> eeprom: Failed to read I2C slave device [0001.698] I> Eeprom read failed 0x3526070d [0001.702] I> Reading eeprom i2c=2 address=0x57 [0001.706] E> I2C: slave not found in slaves. [0001.710] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.718] E> I2C_DEV: Failed to send register address 0x00000000. [0001.724] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.733] E> eeprom: Failed to read I2C slave device [0001.738] I> Eeprom read failed 0x3526070d [0001.742] I> Reading eeprom i2c=2 address=0x52 [0001.747] E> I2C: slave not found in slaves. [0001.751] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.758] E> I2C_DEV: Failed to send register address 0x00000000. [0001.764] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.773] E> eeprom: Failed to read I2C slave device [0001.778] I> Eeprom read failed 0x3526070d [0001.783] I> Find /i2c@c240000's alias i2c1 [0001.786] I> Reading eeprom i2c=1 address=0x52 [0001.792] E> I2C: slave not found in slaves. [0001.795] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.802] E> I2C_DEV: Failed to send register address 0x00000000. [0001.808] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.818] E> eeprom: Retry to read I2C slave device. [0001.822] E> I2C: slave not found in slaves. [0001.826] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.834] E> I2C_DEV: Failed to send register address 0x00000000. [0001.840] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.849] E> eeprom: Failed to read I2C slave device [0001.854] I> Eeprom read failed 0x3526070d [0001.858] I> Reading eeprom i2c=1 address=0x50 [0001.863] E> I2C: slave not found in slaves. [0001.867] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.874] E> I2C_DEV: Failed to send register address 0x00000000. [0001.880] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.889] E> eeprom: Retry to read I2C slave device. [0001.894] E> I2C: slave not found in slaves. [0001.898] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.906] E> I2C_DEV: Failed to send register address 0x00000000. [0001.912] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.921] E> eeprom: Failed to read I2C slave device [0001.926] I> Eeprom read failed 0x3526070d [0001.930] I> create_pm_ids: id: 2888-0006-400-B, len: 15 [0001.935] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.946] I> Adding plugin-manager/ids/2888-0006-400=/i2c@3160000:module@0x50 [0001.954] W> "i2c@3160000" doesn't exist, creating [0001.958] W> "module@0x50" doesn't exist, creating [0001.965] I> Adding plugin-manager/cvm [0001.966] W> "chip-id" doesn't exist, creating [0001.971] I> Adding plugin-manager/chip-id/A02 [0001.975] I> Plugin-manager override starting [0001.980] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.988] I> node /plugin-manager/fragement-soft-wdt matches [0001.995] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.999] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0002.010] I> Disable plugin-manager status in FDT [0002.010] I> Plugin-manager override finished successfully [0002.012] I> gpio framework initialized [0002.017] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0002.024] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.031] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.038] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.046] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.052] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.058] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.066] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.074] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.080] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.088] I> fixed regulator driver initialized [0002.098] I> register 'maxim' power off handle [0002.099] I> virtual i2c enabled [0002.099] I> registered 'maxim,max20024' pmic [0002.102] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.109] I> Boot-device: eMMC [0002.112] I> Boot_device: SDMMC_BOOT instance: 3 [0002.120] I> sdmmc-3 params source = boot args [0002.121] I> create_pm_ids: id: 2888-0006-400-B, len: 15 [0002.126] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.137] I> sdmmc bdev is already initialized [0002.141] I> sdmmc-3 params source = boot args [0002.172] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.184] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.195] I> enabling 'vdd-hdmi-5v0' regulator [0002.200] I> regulator 'vdd-hdmi-5v0' already enabled [0002.201] I> hdmi cable connected [0002.202] W> set volts not configured for 'vdd-1v0' [0002.204] W> set volts not configured for 'vdd-1v8-hs' [0002.208] E> no regulator info present for avdd_hdmi-supply [0002.208] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.212] E> invalid display type [0002.213] E> cannot find any other nvdisp nodes [0002.218] E> I2C: Timeout while polling for bus clear. Last value 0x00000000. [0002.219] E> I2C: Failed to clear bus for instance 6. [0002.224] E> I2C: Failed to clear bus for instance 6. [0002.229] E> I2C_DEV: Failed to initialize instance 6. [0002.234] E> read_edid, invalid i2c handle [0002.242] I> hdmi_enable, starting HDMI initialisation [0002.247] I> hdmi_enable, HDMI initialisation complete [0002.257] I> Load in CBoot Boot Options partition and parse it [0002.263] E> Error -9 when finding node with path /boot-configuration [0002.264] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.267] I> Hit any key to stop autoboot: 4 3 2 1 [0004.275] initializing target [0004.275] calling apps_init() [0004.276] starting app kernel_boot_app [0004.295] I> found decompressor handler: lz4-legacy [0004.296] I> decompressing BMP blob ... [0004.300] I> Kernel type = Normal [0004.300] I> Loading kernel-bootctrl from partition [0004.300] I> Loading partition kernel-bootctrl at 0xa4ac0000 from device(0x1) [0004.307] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.307] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.308] I> ########## SD boot ########## [0004.312] I> No sdcard [0004.314] I> -0 params source = [0004.317] E> Blockdev open: exit error [0004.320] E> SD boot failed, err: 724238353 [0004.324] I> ########## USB boot ########## [0004.333] W> No valid slot number is found in scratch register [0004.334] W> Return default slot: _a [0004.350] I> USB Firmware Version: 60.06 release [0004.405] I> regulator of usb2-0 already enabled [0004.412] I> regulator of usb2-1 already enabled [0004.418] I> regulator of usb2-2 already enabled [0004.426] I> enabling 'vdd-5v-sata' regulator [0005.430] E> failed to initialize xhci controller [0005.431] E> Error in init of XUSB host driver, err: 79790026 [0005.431] E> Failed to initialize device 5-0 [0005.431] E> USB boot failed, err: 2037973030 [0005.432] I> ########## Fixed storage boot ########## [0005.432] I> Already published: 00010003 [0005.432] I> Look for boot partition [0005.436] I> Fallback: assuming 0th partition is boot partition [0005.441] I> Detect filesystem [0005.469] I> Loading extlinux.conf ... [0005.469] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0005.506] I> L4T boot options [0005.506] I> [1]: "primary kernel" [0005.506] I> Enter choice: [0008.507] I> Continuing with default option: 1 [0008.507] I> Loading kernel sig file from rootfs ... [0008.507] I> rootfs path: /sdmmc_user/boot/Image.sig [0008.526] I> Loading kernel binary from rootfs ... [0008.526] I> rootfs path: /sdmmc_user/boot/Image [0008.771] I> Validate kernel ... [0008.771] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0009.101] I> No kernel-dtb binary path [0009.101] W> No valid slot number is found in scratch register [0009.102] W> Return default slot: _a [0009.102] I> A/B: bin_type (38) slot 0 [0009.102] I> Loading kernel-dtb from partition [0009.103] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0009.112] I> Validate kernel-dtb ... [0009.112] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0009.117] I> Loading ramdisk from rootfs ... [0009.118] I> rootfs path: /sdmmc_user/boot/initrd [0009.170] I> Kernel hdr @0xa4ac0000 [0009.170] I> Kernel dtb @0x90000000 [0009.171] I> decompressor handler not found [0009.171] I> Copying kernel image (34398224 bytes) from 0xa4ac0000 to 0x80080000 ... [0009.181] I> Done [0009.182] I> Updated bpmp info to DTB [0009.183] I> Ramdisk: Base: 0x92000000; Size: 0x54eb56 [0009.184] I> Updated initrd info to DTB [0009.184] W> WARN: Fail to override "console=none" in commandline [0009.185] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0009.190] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0009.198] W> No valid slot number is found in scratch register [0009.203] W> Return default slot: _a [0009.207] I> Active slot suffix: [0009.210] I> add_boot_slot_suffix: slot_suffix = [0009.214] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt tegra_fbmem=0x800000@0xa069d000 lut_mem=0x2008@0xa0697000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0009.244] I> Updated bootarg info to DTB [0009.248] W> MAC addr invalid! [0009.251] E> Failed to get WIFI MAC address [0009.255] W> MAC addr invalid! [0009.258] E> Failed to get Bluetooth MAC address [0009.262] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:e5:7e:8e [0009.269] W> "plugin-manager" doesn't exist, creating [0009.273] I> Adding /chosen/plugin-manager/cvm [0009.277] W> "chip-id" doesn't exist, creating [0009.282] I> Adding /chosen/plugin-manager/chip-id [0009.286] W> "configs" doesn't exist, creating [0009.290] I> Adding /chosen/plugin-manager/configs [0009.295] W> "ids" doesn't exist, creating [0009.299] I> Adding /chosen/plugin-manager/ids [0009.303] W> "odm-data" doesn't exist, creating [0009.308] I> Adding /chosen/plugin-manager/odm-data [0009.315] W> "memory" doesn't exist, creating [0009.317] I> [0] START: 0x80000000, END: 0xac000000 [0009.321] I> [1] START: 0xac004000, END: 0xf09d0000 [0009.326] I> [2] START: 0xf09dc000, END: 0xf09e0000 [0009.331] I> dram_block larger than 80000000 [0009.335] I> [3] START: 0x100000000, END: 0x280000000 [0009.340] I> added [base:0x80000000, size:0x2c000000] to /memory [0009.346] I> added [base:0xac200000, size:0x44600000] to /memory [0009.352] I> added [base:0x100000000, size:0x180000000] to /memory [0009.358] I> Updated memory info to DTB [0009.361] E> add_disp_param: failed to get display params for du=1 [0009.368] W> "reset" doesn't exist, creating [0009.372] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0009.376] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0009.381] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0009.386] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0009.390] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0009.395] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0009.400] I> Deleted cpu@6 node in DT [0009.403] I> Deleted cpu@7 node in DT [0009.407] I> Deleted cluster3 node in FDT [0009.411] I> Update arm-pmu in FDT [0009.414] I> - update property: interrupts [0009.418] I> - update property: interrupt-affinity [0009.423] W> "misc-data" doesn't exist, creating [0009.427] I> Boot-device: eMMC [0009.430] I> Add boot-sdmmc to plugin-manager/misc-data [0009.435] I> Add storage-sdmmc to plugin-manager/misc-data [0009.440] W> Unknown storage device [0009.444] I> Add serial number:1423219082119 as DT property [0009.450] I> Plugin-manager override starting [0009.454] I> node /plugin-manager/fragement-tegra-wdt-en matches [0009.460] I> node /plugin-manager/fragement-soft-wdt matches [0009.468] I> node /plugin-manager/fragment-pcie-c5-rp matches [0009.472] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0009.484] I> Disable plugin-manager status in FDT [0009.484] I> Plugin-manager override finished successfully [0009.487] I> tegrabl_load_kernel_and_dtb: Done [0009.508] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140 (trident@trident-Dell) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Tue Dec 8 11:32:22 IST 2020 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a069d000 [ 0.000000] Found lut_mem: 00002008@a0697000 [ 11.866079] tegra-i2c 31c0000.i2c: rx dma timeout txlen:28 rxlen:128 [ 11.866123] tegra-i2c 31c0000.i2c: --- register dump for debugging ---- [ 11.866182] tegra-i2c 31c0000.i2c: I2C_CNFG - 0x22c00 [ 11.866209] tegra-i2c 31c0000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 11.866263] tegra-i2c 31c0000.i2c: I2C_FIFO_CONTROL - 0x0 [ 11.866289] tegra-i2c 31c0000.i2c: I2C_FIFO_STATUS - 0x800080 [ 11.866336] tegra-i2c 31c0000.i2c: I2C_MST_FIFO_CONTROL - 0x70 [ 11.866363] tegra-i2c 31c0000.i2c: I2C_MST_FIFO_STATUS - 0x7c0000 [ 11.866409] tegra-i2c 31c0000.i2c: I2C_MST_PACKET_TRANSFER_CNT - 0x0 [ 11.866436] tegra-i2c 31c0000.i2c: I2C_INT_MASK - 0x6c [ 11.866462] tegra-i2c 31c0000.i2c: I2C_INT_STATUS - 0x2 [ 11.866517] tegra-i2c 31c0000.i2c: i2c transfer timed out addr: 0x50 [ 11.973186] ucsi_ccg 1-0008: read version failed [ 11.973304] ucsi_ccg 1-0008: get_fw_info fail,, err=-121 [ 12.034342] ufs_tegra 2450000.ufshci: dme-link-startup: error code 1 [ 12.146308] ufs_tegra 2450000.ufshci: dme-link-startup: error code 1 [ 12.286274] ufs_tegra 2450000.ufshci: dme-link-startup: error code 1 [ 12.398351] ufs_tegra 2450000.ufshci: dme-link-startup: error code 1 [ 12.410168] ufs_tegra 2450000.ufshci: link startup failed 1 [ 12.504486] CPU3: SError detected, daif=1c0, spsr=0x808000c5, mpidr=80000101, esr=be000000 [ 12.504490] CPU1: SError detected, daif=1c0, spsr=0x80c000c5, mpidr=80000001, esr=be000000 [ 12.504495] CPU4: SError detected, daif=1c0, spsr=0x808000c5, mpidr=80000200, esr=be000000 [ 12.504498] CPU5: SError detected, daif=1c0, spsr=0x808000c5, mpidr=80000201, esr=be000000 [ 12.504502] CPU2: SError detected, daif=1c0, spsr=0x80c000c5, mpidr=80000100, esr=be000000 [ 12.504514] ************************************** [ 12.504517] * For more Internal Decode Help [ 12.504519] * http://nv/cbberr [ 12.504520] * NVIDIA userID is required to access [ 12.504522] ************************************** [ 12.504523] CPU:1, Error:BPMP-NOC [ 12.504526] Error Logger : 1 [ 12.504529] CPU:0, Error:CBB-NOC@0x2300000,irq=485 [ 12.504531] ************************************** [ 12.504533] * For more Internal Decode Help [ 12.504535] ErrLog0 : 0x80030600 [ 12.504537] * http://nv/cbberr [ 12.504539] Transaction Type : RD - Read, Incrementing [ 12.504540] * NVIDIA userID is required to access [ 12.504542] Error Code : TMO [ 12.504543] ************************************** [ 12.504544] Error Source : Target NIU [ 12.504546] CPU:0, Error:CBB-NOC [ 12.504548] Error Description : Target time-out error [ 12.504549] Error Logger : 0 [ 12.504551] Packet header Lock : 0 [ 12.504553] Packet header Len1 : 3 [ 12.504554] NOC protocol version : version >= 2.7 [ 12.504556] ErrLog1 : 0xba400 [ 12.504558] ErrLog0 : 0x80030000 [ 12.504560] ErrLog2 : 0x0 [ 12.504561] Transaction Type : RD - Read, Incrementing [ 12.504563] RouteId : 0xba400 [ 12.504564] Error Code : SLV [ 12.504565] InitFlow : cpu_p_i/I/0 [ 12.504567] Error Source : Target [ 12.504569] Targflow : cbb_t/T/0 [ 12.504571] Error Description : Target error detected by CBB slave [ 12.504572] TargSubRange : 2 [ 12.504574] SeqId : 0 [ 12.504578] AXI2APB_1 bridge error: SFIFONE - Status FIFO Not Empty interrupt [ 12.504578] ErrLog3 : 0x260070 [ 12.504581] AXI2APB_1 bridge error: TIM - Timer(Timeout) interrupt [ 12.504582] ErrLog4 : 0x0 [ 12.504587] Packet header Lock : 0 [ 12.504589] Packet header Len1 : 3 [ 12.504591] NOC protocol version : version >= 2.7 [ 12.504593] ErrLog1 : 0x320024 [ 12.504594] ErrLog2 : 0x0 [ 12.504596] RouteId : 0x320024 [ 12.504598] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 12.504601] Targflow : axis_satellite_grout/T/axis_satellite_grout [ 12.504602] TargSubRange : 0 [ 12.504604] SeqId : 0 [ 12.504605] ErrLog3 : 0x2470088 [ 12.504607] Address : 0x20e60070 (unknown device) [ 12.504609] ErrLog4 : 0x0 [ 12.504610] ErrLog5 : 0xcfa30 [ 12.504618] Address : 0x2470088 (unknown device) [ 12.504620] ErrLog5 : 0x909f851 [ 12.504621] Non-Modify : 0x1 [ 12.504623] Master ID : BPMP [ 12.504624] AXI ID : 0x12 [ 12.504626] Security Group(GRPSEC): 0x7d [ 12.504628] Master ID : CCPLEX [ 12.504630] Cache : 0x0 -- Non-cacheable/Non-Bufferable) [ 12.504632] Security Group(GRPSEC): 0x7e [ 12.504634] Protection : 0x3 -- Privileged, Non-Secure, Data Access [ 12.504635] Cache : 0x1 -- Device [ 12.504637] FALCONSEC : 0x0 [ 12.504639] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 12.504641] Virtual Queuing Channel(VQC): 0x0 [ 12.504643] FALCONSEC : 0x0 [ 12.504645] Virtual Queuing Channel(VQC): 0x0 [ 12.504646] ************************************** [ 12.504647] ************************************** [ 12.504657] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 12.504672] CPU:0, Error:BPMP-NOC@0xd600000,irq=488 [ 12.504674] ************************************** [ 12.504676] * For more Internal Decode Help [ 12.504677] * http://nv/cbberr [ 12.504678] * NVIDIA userID is required to access [ 12.504680] ************************************** [ 12.504681] ************************************** [ 12.504682] CPU:0, Error:BPMP-NOC [ 12.504683] RAS Error in SCF:IOB, ERRSELR_EL1=1025: [ 12.504685] Error Logger : 1 [ 12.504686] Status = 0xf4009604 [ 12.504689] IERR = CBB Interface Error: 0x96 [ 12.504691] SERR = Assertion Failure: 0x4 [ 12.504692] Uncorrectable (this is fatal) [ 12.504694] ErrLog0 : 0x80030608 [ 12.504696] Transaction Type : WR - Write, Incrementing [ 12.504697] Error Code : TMO [ 12.504699] MISC0 = 0x40 [ 12.504701] Error Source : Target NIU [ 12.504702] MISC1 = 0x264a4444a1 [ 12.504703] Error Description : Target time-out error [ 12.504705] Packet header Lock : 0 [ 12.504707] ADDR = 0x8000000002470088 [ 12.504708] Packet header Len1 : 3 [ 12.504710] NOC protocol version : version >= 2.7 [ 12.504711] ErrLog1 : 0xbaa01 [ 12.504713] ************************************** [ 12.504714] ErrLog2 : 0x0 [ 12.504716] RouteId : 0xbaa01 [ 12.504717] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 12.504719] InitFlow : cpu_p_i/I/0 [ 12.504721] Targflow : cbb_t/T/0 [ 12.504722] TargSubRange : 5 [ 12.504724] SeqId : 0 [ 12.504725] ErrLog3 : 0x190000 [ 12.504727] ************************************** [ 12.504728] ErrLog4 : 0x0 [ 12.504730] RAS Error in L2, ERRSELR_EL1=512: [ 12.504731] Status = 0xfc006612 [ 12.504733] Address : 0xc190000 (unknown device) [ 12.504734] IERR = SCF to L2 Slave Error Read: 0x66 [ 12.504735] ErrLog5 : 0xcfa30 [ 12.504737] SERR = Error response from slave: 0x12 [ 12.504738] Master ID : BPMP [ 12.504740] Overflow (there may be more errors) - Uncorrectable [ 12.504742] Security Group(GRPSEC): 0x7d [ 12.504743] Uncorrectable (this is fatal) [ 12.504744] Cache : 0x0 -- Non-cacheable/Non-Bufferable) [ 12.504747] Protection : 0x3 -- Privileged, Non-Secure, Data Access [ 12.504749] FALCONSEC : 0x0 [ 12.504750] MISC0 = 0x80000000400000 [ 12.504752] Virtual Queuing Channel(VQC): 0x0 [ 12.504753] MISC1 = 0x20240000000 [ 12.504755] ************************************** [ 12.504757] ADDR = 0x8000000002470088 [ 12.504762] ************************************** [ 12.504786] CPU0: SError detected, daif=140, spsr=0x60400145, mpidr=80000000, esr=be000000 [ 12.504795] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 12.504875] Bad mode in Error handler detected on CPU1, code 0xbe000000 -- SError [ 12.504881] Internal error: Oops - bad mode: 0 [#1] PREEMPT SMP [ 12.504887] Modules linked in: [ 12.504898] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.9.140 #1 [ 12.504901] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 12.504903] Hardware name: NVIDIA Jetson AGX Xavier 8GB Developer Kit (DT) [ 12.504906] task: ffffffc1f6b72a00 task.stack: ffffffc1f6b84000 [ 12.504916] PC is at t19x_cpu_enter_state+0x4c/0x118 [ 12.504920] LR is at t19x_cpu_enter_state+0x1c/0x118 [ 12.504923] pc : [] lr : [] pstate: 80c000c5 [ 12.504925] sp : ffffffc1f6b87e80 [ 12.504926] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 12.504938] x29: ffffffc1f6b87e80 x28: 0000000000000001 [ 12.504953] x27: ffffff8009e76000 x26: ffffff8009841ac8 [ 12.504959] x25: 0000000000000000 x24: 00000002e8b3e020 [ 12.504963] x23: ffffff8009fea188 x22: ffffffc1ffca6ad0 [ 12.504969] x21: ffffff8009fea1a0 x20: ffffff800a1bba50 [ 12.504972] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 12.504977] x19: 0000000000000000 x18: 0000000000000000 [ 12.504983] x17: 000000000000000e x16: 0000000000000007 [ 12.504988] x15: ffffff8008f799f8 x14: 000000000000002d [ 12.504993] x13: 000000000009baf7 x12: 071c71c71c71c71c [ 12.504998] x11: 000000000000000b x10: 0101010101010101 [ 12.505004] x9 : fffffffffffffffc x8 : 7f7f7f7f7f7f7f7f [ 12.505009] x7 : fefefeff646c606d x6 : 00170401e9e1acf4 [ 12.505014] x5 : 742c616901041700 x4 : 8080808000000000 [ 12.505019] x3 : b34b234b0963a000 x2 : 000000000000000b [ 12.505024] x1 : 0000000000000000 x0 : 0000000000000000 [ 12.505025] [ 12.505028] Process swapper/1 (pid: 0, stack limit = 0xffffffc1f6b84000) [ 12.505030] Call trace: [ 12.505036] [] t19x_cpu_enter_state+0x4c/0x118 [ 12.505040] [] cpuidle_enter_state+0x84/0x380 [ 12.505044] [] cpuidle_enter+0x34/0x48 [ 12.505049] [] call_cpuidle+0x44/0x70 [ 12.505053] [] cpu_startup_entry+0x1b0/0x200 [ 12.505059] [] secondary_start_kernel+0x190/0x1f8 [ 12.505063] [<0000000080f631a4>] 0x80f631a4 [ 12.505073] ---[ end trace ec6a707aec4c95a5 ]--- [ 12.505077] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 12.506687] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 12.506730] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 12.506844] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 12.506868] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 12.506910] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 12.507019] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 12.507042] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 12.507082] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 12.511373] Kernel panic - not syncing: Attempted to kill the idle task! [ 12.511380] SMP: stopping secondary CPUs [ 13.354695] ************************************** [ 13.359660] * For more Internal Decode Help [ 13.363861] * http://nv/cbberr [ 13.367098] * NVIDIA userID is required to access [ 13.371565] ************************************** [ 13.376378] CPU:3, Error:CBB-NOC [ 13.380050] Error Logger : 0 [ 13.382945] ErrLog0 : 0x80030000 [ 13.386616] Transaction Type : RD - Read, Incrementing [ 13.392130] Error Code : SLV [ 13.395365] Error Source : Target [ 13.399042] Error Description : Target error detected by CBB slave [ 13.405692] AXI2APB_1 bridge error: SFIFONE - Status FIFO Not Empty interrupt[ 13.413038] AXI2APB_1 bridge error: TIM - Timer(Timeout) interrupt [ 13.419257] Packet header Lock : 0 [ 13.423186] Packet header Len1 : 3 [ 13.426686] NOC protocol version : version >= 2.7 [ 13.431674] ErrLog1 : 0x32002e [ 13.435086] ErrLog2 : 0x0 [ 13.437972] RouteId : 0x32002e [ 13.441128] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 13.446198] Targflow : axis_satellite_grout/T/axis_satellite_grout [ 13.452240] TargSubRange : 0 [ 13.455735] SeqId : 0 [ 13.458623] ErrLog3 : 0x2470094 [ 13.461861] ErrLog4 : 0x0 [ 13.464764] Address : 0x2470094 (unknown device) [ 13.469737] ErrLog5 : 0xb89f851 [ 13.473062] Non-Modify : 0x1 [ 13.476215] AXI ID : 0x17 [ 13.479535] Master ID : CCPLEX [ 13.482950] Security Group(GRPSEC): 0x7e [ 13.487062] Cache : 0x1 -- Device [ 13.490741] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 13.497823] FALCONSEC : 0x0 [ 13.500974] Virtual Queuing Channel(VQC): 0x0 [ 13.505612] ************************************** [ 13.510599] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 13.519105] ************************************** [ 13.523641] RAS Error in SCF:IOB, ERRSELR_EL1=1025: [ 13.528453] Status = 0xf4009604 [ 13.531865] IERR = CBB Interface Error: 0x96 [ 13.536328] SERR = Assertion Failure: 0x4 [ 13.540786] Uncorrectable (this is fatal) [ 13.544815] MISC0 = 0x40 [ 13.547260] MISC1 = 0xe64a4445e1 [ 13.550676] ADDR = 0x8000000002470094 [ 13.554615] ************************************** [ 13.559426] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 13.568622] ************************************** [ 13.573773] RAS Error in L2, ERRSELR_EL1=512: [ 13.578148] Status = 0xfc006612 [ 13.581563] IERR = SCF to L2 Slave Error Read: 0x66 [ 13.586374] SERR = Error response from slave: 0x12 [ 13.591187] Overflow (there may be more errors) - Uncorrectable [ 13.594180] SMP: failed to stop secondary CPUs 1,3 [ 13.594190] Memory Limit: none bled [ 13.605539] Rebooting in 5 seco[ 13.608600] Uncorrectable (this is f[ 13.608600] Uncorrectable (this is fatal) [ 13.616391] MISC0 = 0x80000000400000 [ 13.619974] MISC1 = 0x20240000003 [ 13.622954] ADDR = 0x8000000002470094 [ 13.626720] ************************************** [ 13.631710] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 13.639777] Bad mode in Error handler detected on CPU3, code 0xbe000000 -- SError [ 13.646844] Internal error: Oops - bad mode: 0 [#2] PREEMPT SMP [ 13.653139] Modules linked in: [ 13.656043] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 4.9.140 #1 [ 13.663290] Hardware name: NVIDIA Jetson AGX Xavier 8GB Developer Kit (DT) [ 13.670462] task: ffffffc1f6b74600 task.stack: ffffffc1f6b8c000 [ 13.675985] PC is at t19x_cpu_enter_state+0x4c/0x118 [ 13.681052] LR is at t19x_cpu_enter_state+0x1c/0x118 [ 13.685950] pc : [] lr : [] pstate: 808000c5 [ 13.693136] sp : ffffffc1f6b8fe80 [ 13.696802] x29: ffffffc1f6b8fe80 x28: 0000000000000001 [ 13.702400] x27: ffffff8009e76000 x26: ffffff8009841ac8 [ 13.708172] x25: 0000000000000000 x24: 00000002e337d5c0 [ 13.713608] x23: ffffff8009fea188 x22: ffffffc1ffcd8ad0 [ 13.719548] x21: ffffff8009fea1a0 x20: ffffff800a1bba50 [ 13.725234] x19: 0000000000000000 x18: 000000000000001b [ 13.730671] x17: 000000000000000e x16: 0000000000000007 [ 13.736521] x15: 0000000000000000 x14: 0000000000000019 [ 13.742047] x13: 0000000000026141 x12: 071c71c71c71c71c [ 13.747985] x11: 000000000000000b x10: 0101010101010101 [ 13.753508] x9 : fffffffffffffffc x8 : 7f7f7f7f7f7f7f7f [ 13.759289] x7 : fefefeff646c606d x6 : 00170401e9e1acf4 [ 13.765048] x5 : 742c616901041700 x4 : 8080808000000000 [ 13.770134] x3 : b34b234b0963a000 x2 : 000000000000000b [ 13.775470] x1 : 0000000000000000 x0 : 0000000000000000 [ 13.780808] [ 13.782203] Process swapper/3 (pid: 0, stack limit = 0xffffffc1f6b8c000) [ 13.788591] Call trace: [ 13.791215] [] t19x_cpu_enter_state+0x4c/0x118 [ 13.796813] [] cpuidle_enter_state+0x84/0x380 [ 13.802419] [] cpuidle_enter+0x34/0x48 [ 13.807233] [] call_cpuidle+0x44/0x70 [ 13.812301] [] cpu_startup_entry+0x1b0/0x200 [ 13.817646] [] secondary_start_kernel+0x190/0x1f8 [ 13.823505] [<0000000080f631a4>] 0x80f631a4 [ 13.827270] ---[ end trace ec6a707aec4c95a6 ]--- [ 18.615227] SMP: stopping secondary CPUs [ 19.647183] SMP: failed to stop secondary CPUs 1,3 ÿäÿâ [0000.055] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.063] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.069] I> Boot-mode: Coldboot [0000.072] I> Chip revision : A02 [0000.075] I> Bootrom patch version : 15 (correctly patched) [0000.080] I> ATE fuse revision : 0x200 [0000.083] I> Ram repair fuse : 0x0 [0000.086] I> Ram Code : 0x4 [0000.089] I> rst_source : 0x2 [0000.092] I> rst_level : 0x1 [0000.095] I> Boot-device: eMMC [0000.110] I> sdmmc DDR50 mode [0000.114] W> No valid slot number is found in scratch register [0000.120] W> Return default slot: _a [0000.123] I> Active Boot chain : 0 [0000.126] I> Boot-device: eMMC [0000.130] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.136] I> Temperature = 41500 [0000.139] W> Skipping boost for clk: BPMP_CPU_NIC [0000.143] W> Skipping boost for clk: BPMP_APB [0000.147] W> Skipping boost for clk: AXI_CBB [0000.151] W> Skipping boost for clk: AON_CPU_NIC [0000.156] W> Skipping boost for clk: CAN1 [0000.159] W> Skipping boost for clk: CAN2 [0000.164] I> Boot-device: eMMC [0000.166] I> Boot-device: eMMC [0000.176] I> Sdmmc: HS400 mode enabled [0000.180] I> ECC region[0]: Start:0x0, End:0x0 [0000.185] I> ECC region[1]: Start:0x0, End:0x0 [0000.189] I> ECC region[2]: Start:0x0, End:0x0 [0000.193] I> ECC region[3]: Start:0x0, End:0x0 [0000.197] I> ECC region[4]: Start:0x0, End:0x0 [0000.201] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.207] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.211] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.216] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.220] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.226] E> FAILED: Thermal config [0000.233] E> FAILED: MEMIO rail config [0000.245] I> Boot-device: eMMC [0000.254] I> sdmmc bdev is already initialized [0000.325] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ÿâ [0000.333] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-389501e9) [0000.334] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.335] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.335] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.341] W> device prod register failed [0000.345] I> Boot-device: eMMC [0000.348] I> Boot_device: SDMMC_BOOT instance: 3 [0000.354] I> sdmmc-3 params source = boot args [0000.357] I> sdmmc bdev is already initialized [0000.361] I> sdmmc-3 params source = boot args [0000.369] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.376] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.377] W> No valid slot number is found in scratch register [0000.382] W> Return default slot: _a [0000.385] I> Active Boot chain : 0 [0000.389] I> parsing oem signed section of bpmp-fw header done [0000.394] I> bpmp-fw binary init read from storage [0000.399] I> oem authentication of bpmp-fw header done [0000.406] I> bpmp-fw binary done read from storage [0000.408] I> bpmp-fw: Authentication init Done [0000.413] I> parsing oem signed section of cpubl header done [0000.418] I> cpubl binary init read from storage [0000.423] I> bpmp-fw: Authentication Finalize Done [0000.427] I> oem authentication of cpubl header done [0000.432] I> cpubl binary done read from storage [0000.436] I> cpubl: Authentication init Done [0000.441] I> parsing oem signed section of rce header done [0000.446] I> rce binary init read from storage [0000.451] I> Relocating BR-BCT [0000.453] I> cpubl: Authentication Finalize Done [0000.458] I> oem authentication of rce header done [0000.462] I> rce binary done read from storage [0000.467] I> rce: Authentication init Done [0000.471] I> parsing oem signed section of ape header done [0000.476] I> ape binary init read from storage [0000.480] I> rce: Authentication Finalize Done [0000.485] I> oem authentication of ape header done [0000.489] I> ape binary done read from storage [0000.493] I> ape: Authentication init Done [0000.498] I> parsing oem signed section of tos header done [0000.503] I> tos binary init read from storage [0000.507] I> ape: Authentication Finalize Done [0000.512] I> oem authentication of tos header done [0000.516] I> tos binary done read from storage [0000.520] I> tos: Authentication init Done [0000.524] I> parsing oem signed section of bpmp-fw-dtb header done [0000.530] I> bpmp-fw-dtb binary init read from storage [0000.535] I> tos: Authentication Finalize Done [0000.541] I> oem authentication of bpmp-fw-dtb header done [0000.545] I> bpmp-fw-dtb binary done read from storage [0000.550] I> bpmp-fw-dtb: Authentication init Done [0000.555] I> parsing oem signed section of cpubl-dtb header done [0000.560] I> cpubl-dtb binary init read from storage [0000.565] I> bpmp-fw-dtb: Authentication Finalize Done [0000.601] I> oem authentication of cpubl-dtb header done [0000.601] I> cpubl-dtb binary done read from storage [0000.602] I> cpubl-dtb: Authentication init Done [0000.604] I> parsing oem signed section of eks header done [0000.605] I> eks binary init read from storage [0000.605] I> cpubl-dtb: Authentication Finalize Done [0000.606] I> oem authentication of eks header done [0000.609] I> eks binary done read from storage [0000.614] I> eks: Authentication init Done [0000.618] I> eks: Authentication Finalize Done [0000.622] I> EKB detected (length: 0x410) @ VA:0x5270a400 ÿäNOTICE: BL31: v1.3(release):de895fd9e NOTICE: BL31: Built : 12:15:31, Oct 16 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete ÿâ welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 391 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform_init: bad clk id in clock@cluster1_avfs avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized ÿá [0001.027] I> Welcome to Cboot ÿâWARNING: no registered clock for FMON_NAFLL_CLUSTER1 (id 281) fmon_post initialized ÿá[0001.027] I> Cboot Version: t194-aad9d75e [0001.028] I> CPU-BL Params @ 0xf2820000 [0001.032] I> 0) Base:0x00000000 Size:0x00000000 [0001.036] I> 1) Base:0xf1100000 Size:0x00100000 ÿâclk_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 clk_debugfs initialized emc_debugfs initialized dvs_debugfs initialized ÿá[0001.041] I> 2) Base:0xf2000000 Size:0x00200000ÿâfmon_debugfs_init_one: no clock debugfs node to attach FMON_NAFLL_CLUSTER1 fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ÿá [0001.213] I> 3) Base:0xf1200000 Size:0x00200000 [0001.218] I> 4) Base:0xf1000000 Size:0x00100000 [0001.222] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.227] I> 6) Base:0xf3800000 Size:0x00400000 [0001.231] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.236] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.240] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.245] I> 10) Base:0xf3000000 Size:0x00800000 [0001.249] I> 11) Base:0x40000000 Size:0x00040000 [0001.254] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.258] I> 13) Base:0x40046000 Size:0x00002000 [0001.263] I> 14) Base:0x40048000 Size:0x00002000 [0001.267] I> 15) Base:0xac000000 Size:0x00004000 [0001.271] I> 16) Base:0x4004a000 Size:0x00002000 [0001.276] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.280] I> 18) Base:0x4004c000 Size:0x00002000 [0001.285] I> 19) Base:0xf2200000 Size:0x00600000 [0001.289] I> 20) Base:0x4004e000 Size:0x00002000 [0001.294] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.298] I> 22) Base:0x00000000 Size:0x00000000 [0001.303] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.307] I> 24) Base:0xf6000000 Size:0x02000000 [0001.312] I> 25) Base:0x40050000 Size:0x00002000 [0001.316] I> 26) Base:0x40040000 Size:0x00006000 [0001.321] I> 27) Base:0xf1800000 Size:0x00400000 [0001.325] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.329] I> 29) Base:0xf1400000 Size:0x00400000 [0001.334] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.338] I> 31) Base:0x00000000 Size:0x00000000 [0001.343] I> 32) Base:0xf8000000 Size:0x08000000 [0001.347] I> 33) Base:0x00000000 Size:0x00000000 [0001.352] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.356] I> 35) Base:0xab000000 Size:0x01000000 [0001.361] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.365] I> 37) Base:0xf2800000 Size:0x00800000 [0001.370] I> 38) Base:0x80000000 Size:0x20000000 [0001.374] I> 39) Base:0xb0000000 Size:0x08000000 [0001.379] I> 40) Base:0x00000000 Size:0x00000000 [0001.383] I> 41) Base:0x00000000 Size:0x00000000 [0001.387] I> 42) Base:0x00000000 Size:0x00000000 [0001.392] I> 43) Base:0x00000000 Size:0x00000000 [0001.396] I> 44) Base:0x00000000 Size:0x00000000 [0001.401] I> 45) Base:0x00000000 Size:0x00000000 [0001.405] GIC-SPI Target CPU: 0 [0001.408] Interrupts Init done [0001.411] calling constructors [0001.414] initializing heap [0001.417] I> Heap: [0xa0691568 ... 0xab000000] [0001.421] initializing threads [0001.424] initializing timers [0001.427] creating bootstrap completion thread [0001.431] top of bootstrap2() [0001.434] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.438] initializing platform [0001.441] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.447] W> device prod register failed [0001.451] I> Bl_dtb @0xaaf00000 [0001.457] W> "plugin-manager" doesn't exist, creating [0001.459] W> "ids" doesn't exist, creating [0001.463] W> "connection" doesn't exist, creating [0001.467] W> "configs" doesn't exist, creating [0001.477] I> Find /i2c@3160000's alias i2c0 [0001.478] I> Reading eeprom i2c=0 address=0x50 [0001.505] I> Device at /i2c@3160000:0x50 [0001.505] I> Reading eeprom i2c=0 address=0x56 [0001.506] E> I2C: slave not found in slaves. [0001.506] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0001.507] E> I2C_DEV: Failed to send register address 0x00000000. [0001.507] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0001.515] E> eeprom: Failed to read I2C slave device [0001.520] I> Eeprom read failed 0x3526070d [0001.525] I> Find /i2c@3180000's alias i2c2 [0001.528] I> Reading eeprom i2c=2 address=0x54 [0001.533] E> I2C: slave not found in slaves. [0001.536] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.544] E> I2C_DEV: Failed to send register address 0x00000000. [0001.549] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.559] E> eeprom: Failed to read I2C slave device [0001.564] I> Eeprom read failed 0x3526070d [0001.568] I> Reading eeprom i2c=2 address=0x57 [0001.572] E> I2C: slave not found in slaves. [0001.576] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.584] E> I2C_DEV: Failed to send register address 0x00000000. [0001.590] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.599] E> eeprom: Failed to read I2C slave device [0001.604] I> Eeprom read failed 0x3526070d [0001.608] I> Reading eeprom i2c=2 address=0x52 [0001.612] E> I2C: slave not found in slaves. [0001.616] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.624] E> I2C_DEV: Failed to send register address 0x00000000. [0001.630] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.639] E> eeprom: Failed to read I2C slave device [0001.644] I> Eeprom read failed 0x3526070d [0001.649] I> Find /i2c@c240000's alias i2c1 [0001.652] I> Reading eeprom i2c=1 address=0x52 [0001.658] E> I2C: slave not found in slaves. [0001.660] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.668] E> I2C_DEV: Failed to send register address 0x00000000. [0001.674] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.683] E> eeprom: Retry to read I2C slave device. [0001.688] E> I2C: slave not found in slaves. [0001.692] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.700] E> I2C_DEV: Failed to send register address 0x00000000. [0001.706] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.715] E> eeprom: Failed to read I2C slave device [0001.720] I> Eeprom read failed 0x3526070d [0001.724] I> Reading eeprom i2c=1 address=0x50 [0001.728] E> I2C: slave not found in slaves. [0001.732] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.740] E> I2C_DEV: Failed to send register address 0x00000000. [0001.746] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.755] E> eeprom: Retry to read I2C slave device. [0001.760] E> I2C: slave not found in slaves. [0001.764] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.772] E> I2C_DEV: Failed to send register address 0x00000000. [0001.777] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.787] E> eeprom: Failed to read I2C slave device [0001.792] I> Eeprom read failed 0x3526070d [0001.796] I> create_pm_ids: id: 2888-0006-400-B, len: 15 [0001.801] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.812] I> Adding plugin-manager/ids/2888-0006-400=/i2c@3160000:module@0x50 [0001.819] W> "i2c@3160000" doesn't exist, creating [0001.824] W> "module@0x50" doesn't exist, creating [0001.830] I> Adding plugin-manager/cvm [0001.832] W> "chip-id" doesn't exist, creating [0001.836] I> Adding plugin-manager/chip-id/A02 [0001.841] I> Plugin-manager override starting [0001.846] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.853] I> node /plugin-manager/fragement-soft-wdt matches [0001.863] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.867] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0001.876] I> Disable plugin-manager status in FDT [0001.877] I> Plugin-manager override finished successfully [0001.878] I> gpio framework initialized [0001.882] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0001.890] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0001.896] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0001.904] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.912] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.918] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.924] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0001.932] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.940] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.946] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.954] I> fixed regulator driver initialized [0001.964] I> register 'maxim' power off handle [0001.965] I> virtual i2c enabled [0001.965] I> registered 'maxim,max20024' pmic [0001.968] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0001.975] I> Boot-device: eMMC [0001.978] I> Boot_device: SDMMC_BOOT instance: 3 [0001.986] I> sdmmc-3 params source = boot args [0001.987] I> create_pm_ids: id: 2888-0006-400-B, len: 15 [0001.991] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.002] I> sdmmc bdev is already initialized [0002.007] I> sdmmc-3 params source = boot args [0002.037] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.050] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.060] I> enabling 'vdd-hdmi-5v0' regulator [0002.065] I> regulator 'vdd-hdmi-5v0' already enabled [0002.065] I> hdmi cable connected [0002.067] W> set volts not configured for 'vdd-1v0' [0002.069] W> set volts not configured for 'vdd-1v8-hs' [0002.073] E> no regulator info present for avdd_hdmi-supply [0002.074] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.078] E> invalid display type [0002.079] E> cannot find any other nvdisp nodes [0002.084] E> I2C: Timeout while polling for bus clear. Last value 0x00000000. [0002.084] E> I2C: Failed to clear bus for instance 6. [0002.089] E> I2C: Failed to clear bus for instance 6. [0002.094] E> I2C_DEV: Failed to initialize instance 6. [0002.099] E> read_edid, invalid i2c handle [0002.106] I> hdmi_enable, starting HDMI initialisation [0002.112] I> hdmi_enable, HDMI initialisation complete [0002.121] I> Load in CBoot Boot Options partition and parse it [0002.128] E> Error -9 when finding node with path /boot-configuration [0002.128] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.132] I> Hit any key to stop autoboot: 4 3 2 1 [0004.140] initializing target [0004.140] calling apps_init() [0004.141] starting app kernel_boot_app [0004.160] I> found decompressor handler: lz4-legacy [0004.161] I> decompressing BMP blob ... [0004.164] I> Kernel type = Normal [0004.165] I> Loading kernel-bootctrl from partition [0004.165] I> Loading partition kernel-bootctrl at 0xa4ac0000 from device(0x1) [0004.172] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.172] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.173] I> ########## SD boot ########## [0004.177] I> No sdcard [0004.179] I> -0 params source = [0004.182] E> Blockdev open: exit error [0004.185] E> SD boot failed, err: 724238353 [0004.189] I> ########## USB boot ########## [0004.198] W> No valid slot number is found in scratch register [0004.199] W> Return default slot: _a [0004.215] I> USB Firmware Version: 60.06 release [0004.270] I> regulator of usb2-0 already enabled [0004.277] I> regulator of usb2-1 already enabled [0004.284] I> regulator of usb2-2 already enabled [0004.293] I> enabling 'vdd-5v-sata' regulator [0005.298] E> failed to initialize xhci controller [0005.298] E> Error in init of XUSB host driver, err: 79790026 [0005.299] E> Failed to initialize device 5-0 [0005.299] E> USB boot failed, err: 2037973030 [0005.299] I> ########## Fixed storage boot ########## [0005.300] I> Already published: 00010003 [0005.300] I> Look for boot partition [0005.304] I> Fallback: assuming 0th partition is boot partition [0005.309] I> Detect filesystem [0005.336] I> Loading extlinux.conf ... [0005.337] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0005.374] I> L4T boot options [0005.374] I> [1]: "primary kernel" [0005.374] I> Enter choice: [0008.375] I> Continuing with default option: 1 [0008.375] I> Loading kernel sig file from rootfs ... [0008.375] I> rootfs path: /sdmmc_user/boot/Image.sig [0008.394] I> Loading kernel binary from rootfs ... [0008.394] I> rootfs path: /sdmmc_user/boot/Image [0008.639] I> Validate kernel ... [0008.640] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0008.969] I> No kernel-dtb binary path [0008.969] W> No valid slot number is found in scratch register [0008.970] W> Return default slot: _a [0008.970] I> A/B: bin_type (38) slot 0 [0008.970] I> Loading kernel-dtb from partition [0008.971] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0008.980] I> Validate kernel-dtb ... [0008.980] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0008.985] I> Loading ramdisk from rootfs ... [0008.986] I> rootfs path: /sdmmc_user/boot/initrd [0009.038] I> Kernel hdr @0xa4ac0000 [0009.039] I> Kernel dtb @0x90000000 [0009.039] I> decompressor handler not found [0009.039] I> Copying kernel image (34398224 bytes) from 0xa4ac0000 to 0x80080000 ... [0009.050] I> Done [0009.051] I> Updated bpmp info to DTB [0009.052] I> Ramdisk: Base: 0x92000000; Size: 0x54eb56 [0009.052] I> Updated initrd info to DTB [0009.052] W> WARN: Fail to override "console=none" in commandline [0009.053] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0009.059] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0009.066] W> No valid slot number is found in scratch register [0009.072] W> Return default slot: _a [0009.075] I> Active slot suffix: [0009.078] I> add_boot_slot_suffix: slot_suffix = [0009.083] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt tegra_fbmem=0x800000@0xa069d000 lut_mem=0x2008@0xa0697000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0009.112] I> Updated bootarg info to DTB [0009.116] W> MAC addr invalid! [0009.119] E> Failed to get WIFI MAC address [0009.123] W> MAC addr invalid! [0009.126] E> Failed to get Bluetooth MAC address [0009.130] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:e5:7e:8e [0009.137] W> "plugin-manager" doesn't exist, creating [0009.142] I> Adding /chosen/plugin-manager/cvm [0009.146] W> "chip-id" doesn't exist, creating [0009.150] I> Adding /chosen/plugin-manager/chip-id [0009.155] W> "configs" doesn't exist, creating [0009.159] I> Adding /chosen/plugin-manager/configs [0009.163] W> "ids" doesn't exist, creating [0009.167] I> Adding /chosen/plugin-manager/ids [0009.172] W> "odm-data" doesn't exist, creating [0009.176] I> Adding /chosen/plugin-manager/odm-data [0009.184] W> "memory" doesn't exist, creating [0009.185] I> [0] START: 0x80000000, END: 0xac000000 [0009.190] I> [1] START: 0xac004000, END: 0xf09d0000 [0009.194] I> [2] START: 0xf09dc000, END: 0xf09e0000 [0009.199] I> dram_block larger than 80000000 [0009.203] I> [3] START: 0x100000000, END: 0x280000000 [0009.208] I> added [base:0x80000000, size:0x2c000000] to /memory [0009.214] I> added [base:0xac200000, size:0x44600000] to /memory [0009.220] I> added [base:0x100000000, size:0x180000000] to /memory [0009.227] I> Updated memory info to DTB [0009.230] E> add_disp_param: failed to get display params for du=1 [0009.236] W> "reset" doesn't exist, creating [0009.240] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0009.244] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0009.249] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0009.254] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0009.259] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0009.263] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0009.268] I> Deleted cpu@6 node in DT [0009.272] I> Deleted cpu@7 node in DT [0009.275] I> Deleted cluster3 node in FDT [0009.279] I> Update arm-pmu in FDT [0009.282] I> - update property: interrupts [0009.286] I> - update property: interrupt-affinity [0009.292] W> "misc-data" doesn't exist, creating [0009.295] I> Boot-device: eMMC [0009.298] I> Add boot-sdmmc to plugin-manager/misc-data [0009.303] I> Add storage-sdmmc to plugin-manager/misc-data [0009.309] W> Unknown storage device [0009.313] I> Add serial number:1423219082119 as DT property [0009.319] I> Plugin-manager override starting [0009.322] I> node /plugin-manager/fragement-tegra-wdt-en matches [0009.329] I> node /plugin-manager/fragement-soft-wdt matches [0009.336] I> node /plugin-manager/fragment-pcie-c5-rp matches [0009.341] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0009.352] I> Disable plugin-manager status in FDT [0009.352] I> Plugin-manager override finished successfully [0009.355] I> tegrabl_load_kernel_and_dtb: Done [0009.377] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140 (trident@trident-Dell) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Tue Dec 8 11:32:22 IST 2020 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a069d000 [ 0.000000] Found lut_mem: 00002008@a0697000 [ 11.608575] tegra-i2c 31c0000.i2c: rx dma timeout txlen:28 rxlen:128 [ 11.608615] tegra-i2c 31c0000.i2c: --- register dump for debugging ---- [ 11.608642] tegra-i2c 31c0000.i2c: I2C_CNFG - 0x22c00 [ 11.608688] tegra-i2c 31c0000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 11.608712] tegra-i2c 31c0000.i2c: I2C_FIFO_CONTROL - 0x0 [ 11.608734] tegra-i2c 31c0000.i2c: I2C_FIFO_STATUS - 0x800080 [ 11.608756] tegra-i2c 31c0000.i2c: I2C_MST_FIFO_CONTROL - 0x70 [ 11.608803] tegra-i2c 31c0000.i2c: I2C_MST_FIFO_STATUS - 0x7c0000 [ 11.608830] tegra-i2c 31c0000.i2c: I2C_MST_PACKET_TRANSFER_CNT - 0x0 [ 11.608853] tegra-i2c 31c0000.i2c: I2C_INT_MASK - 0x6c [ 11.608895] tegra-i2c 31c0000.i2c: I2C_INT_STATUS - 0x2 [ 11.608927] tegra-i2c 31c0000.i2c: i2c transfer timed out addr: 0x50 [ 11.734635] ucsi_ccg 1-0008: read version failed [ 11.734781] ucsi_ccg 1-0008: get_fw_info fail,, err=-121 [ 11.792740] ufs_tegra 2450000.ufshci: dme-link-startup: error code 1 [ 11.904736] ufs_tegra 2450000.ufshci: dme-link-startup: error code 1 [ 12.048677] ufs_tegra 2450000.ufshci: dme-link-startup: error code 1 [ 12.160880] ufs_tegra 2450000.ufshci: dme-link-startup: error code 1 [ 12.172653] ufs_tegra 2450000.ufshci: link startup failed 1 [ 12.266873] CPU5: SError detected, daif=1c0, spsr=0x80c000c5, mpidr=80000201, esr=be000000 [ 12.266880] CPU3: SError detected, daif=1c0, spsr=0x808000c5, mpidr=80000101, esr=be000000 [ 12.266884] CPU2: SError detected, daif=1c0, spsr=0x808000c5, mpidr=80000100, esr=be000000 [ 12.266890] CPU1: SError detected, daif=1c0, spsr=0x808000c5, mpidr=80000001, esr=be000000 [ 12.266895] CPU4: SError detected, daif=1c0, spsr=0x80c000c5, mpidr=80000200, esr=be000000 [ 12.266906] ************************************** [ 12.266909] * For more Internal Decode Help [ 12.266916] * http://nv/cbberr [ 12.266918] * NVIDIA userID is required to access [ 12.266919] ************************************** [ 12.266924] CPU:0, Error:CBB-NOC@0x2300000,irq=485 [ 12.266927] CPU:3, Error:BPMP-NOC [ 12.266929] ************************************** [ 12.266932] Error Logger : 1 [ 12.266934] * For more Internal Decode Help [ 12.266936] * http://nv/cbberr [ 12.266938] * NVIDIA userID is required to access [ 12.266939] ************************************** [ 12.266941] CPU:0, Error:CBB-NOC [ 12.266944] ErrLog0 : 0x80030600 [ 12.266947] Error Logger : 0 [ 12.266949] Transaction Type : RD - Read, Incrementing [ 12.266951] Error Code : TMO [ 12.266953] Error Source : Target NIU [ 12.266955] ErrLog0 : 0x80030000 [ 12.266957] Error Description : Target time-out error [ 12.266959] Transaction Type : RD - Read, Incrementing [ 12.266962] Packet header Lock : 0 [ 12.266964] Error Code : SLV [ 12.266966] Packet header Len1 : 3 [ 12.266969] Error Source : Target [ 12.266971] NOC protocol version : version >= 2.7 [ 12.266973] Error Description : Target error detected by CBB slave [ 12.266976] ErrLog1 : 0xba400 [ 12.266981] AXI2APB_1 bridge error: SFIFONE - Status FIFO Not Empty interrupt [ 12.266982] ErrLog2 : 0x0 [ 12.266986] AXI2APB_1 bridge error: TIM - Timer(Timeout) interrupt [ 12.266986] RouteId : 0xba400 [ 12.266989] InitFlow : cpu_p_i/I/0 [ 12.266992] Packet header Lock : 0 [ 12.266994] Targflow : cbb_t/T/0 [ 12.266996] Packet header Len1 : 3 [ 12.266998] TargSubRange : 2 [ 12.267000] NOC protocol version : version >= 2.7 [ 12.267001] SeqId : 0 [ 12.267004] ErrLog1 : 0x320022 [ 12.267007] ErrLog3 : 0x260070 [ 12.267009] ErrLog2 : 0x0 [ 12.267011] ErrLog4 : 0x0 [ 12.267013] RouteId : 0x320022 [ 12.267016] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 12.267018] Targflow : axis_satellite_grout/T/axis_satellite_grout [ 12.267020] TargSubRange : 0 [ 12.267022] SeqId : 0 [ 12.267023] ErrLog3 : 0x2470088 [ 12.267026] ErrLog4 : 0x0 [ 12.267037] Address : 0x20e60070 (unknown device) [ 12.267040] ErrLog5 : 0xcfa30 [ 12.267042] Master ID : BPMP [ 12.267044] Security Group(GRPSEC): 0x7d [ 12.267046] Address : 0x2470088 (unknown device) [ 12.267049] Cache : 0x0 -- Non-cacheable/Non-Bufferable) [ 12.267051] ErrLog5 : 0x889f851 [ 12.267054] Protection : 0x3 -- Privileged, Non-Secure, Data Access [ 12.267056] Non-Modify : 0x1 [ 12.267058] FALCONSEC : 0x0 [ 12.267060] AXI ID : 0x11 [ 12.267068] Virtual Queuing Channel(VQC): 0x0 [ 12.267071] Master ID : CCPLEX [ 12.267073] ************************************** [ 12.267075] Security Group(GRPSEC): 0x7e [ 12.267077] Cache : 0x1 -- Device [ 12.267080] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 12.267082] FALCONSEC : 0x0 [ 12.267084] ************************************** [ 12.267086] Virtual Queuing Channel(VQC): 0x0 [ 12.267088] * For more Internal Decode Help [ 12.267089] ************************************** [ 12.267091] * http://nv/cbberr [ 12.267093] * NVIDIA userID is required to access [ 12.267094] ************************************** [ 12.267097] CPU:3, Error:CBB-NOC [ 12.267099] Error Logger : 0 [ 12.267106] ErrLog0 : 0x80030000 [ 12.267108] Transaction Type : RD - Read, Incrementing [ 12.267111] CPU:0, Error:BPMP-NOC@0xd600000,irq=488 [ 12.267113] Error Code : SLV [ 12.267115] ************************************** [ 12.267117] Error Source : Target [ 12.267119] * For more Internal Decode Help [ 12.267121] Error Description : Target error detected by CBB slave [ 12.267123] * http://nv/cbberr [ 12.267125] * NVIDIA userID is required to access [ 12.267128] AXI2APB_1 bridge error: SFIFONE - Status FIFO Not Empty interrupt [ 12.267129] ************************************** [ 12.267131] CPU:0, Error:BPMP-NOC [ 12.267133] Error Logger : 1 [ 12.267136] Packet header Lock : 0 [ 12.267138] Packet header Len1 : 3 [ 12.267140] NOC protocol version : version >= 2.7 [ 12.267142] ErrLog0 : 0x80030608 [ 12.267144] ErrLog1 : 0x320022 [ 12.267146] Transaction Type : WR - Write, Incrementing [ 12.267149] ErrLog2 : 0x0 [ 12.267151] Error Code : TMO [ 12.267153] RouteId : 0x320022 [ 12.267155] Error Source : Target NIU [ 12.267157] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 12.267159] Error Description : Target time-out error [ 12.267162] Targflow : axis_satellite_grout/T/axis_satellite_grout [ 12.267164] Packet header Lock : 0 [ 12.267166] TargSubRange : 0 [ 12.267168] Packet header Len1 : 3 [ 12.267170] SeqId : 0 [ 12.267172] NOC protocol version : version >= 2.7 [ 12.267174] ErrLog3 : 0x2470088 [ 12.267176] ErrLog1 : 0xbaa01 [ 12.267178] ErrLog4 : 0x0 [ 12.267180] ErrLog2 : 0x0 [ 12.267183] Address : 0x2470088 (unknown device) [ 12.267185] RouteId : 0xbaa01 [ 12.267187] ErrLog5 : 0x889f851 [ 12.267189] InitFlow : cpu_p_i/I/0 [ 12.267191] Non-Modify : 0x1 [ 12.267194] Targflow : cbb_t/T/0 [ 12.267196] AXI ID : 0x11 [ 12.267198] TargSubRange : 5 [ 12.267199] Master ID : CCPLEX [ 12.267207] SeqId : 0 [ 12.267209] Security Group(GRPSEC): 0x7e [ 12.267211] ErrLog3 : 0x190000 [ 12.267214] Cache : 0x1 -- Device [ 12.267216] ErrLog4 : 0x0 [ 12.267219] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 12.267221] Address : 0xc190000 (unknown device) [ 12.267223] FALCONSEC : 0x0 [ 12.267225] ErrLog5 : 0xcfa30 [ 12.267227] Virtual Queuing Channel(VQC): 0x0 [ 12.267230] Master ID : BPMP [ 12.267232] ************************************** [ 12.267234] Security Group(GRPSEC): 0x7d [ 12.267236] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 12.267238] Cache : 0x0 -- Non-cacheable/Non-Bufferable) [ 12.267242] Protection : 0x3 -- Privileged, Non-Secure, Data Access [ 12.267244] FALCONSEC : 0x0 [ 12.267245] Virtual Queuing Channel(VQC): 0x0 [ 12.267249] ************************************** [ 12.267260] ************************************** [ 12.267263] RAS Error in SCF:IOB, ERRSELR_EL1=1025: [ 12.267266] Status = 0xf4009604 [ 12.267269] CPU0: SError detected, daif=140, spsr=0x60400145, mpidr=80000000, esr=be000000 [ 12.267271] IERR = CBB Interface Error: 0x96 [ 12.267274] SERR = Assertion Failure: 0x4 [ 12.267276] Uncorrectable (this is fatal) [ 12.267282] MISC0 = 0x40 [ 12.267284] MISC1 = 0x1264a444461 [ 12.267289] ADDR = 0x8000000002470088 [ 12.267295] ************************************** [ 12.267300] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 12.267309] ************************************** [ 12.267311] RAS Error in L2, ERRSELR_EL1=512: [ 12.267313] Status = 0xfc006612 [ 12.267315] IERR = SCF to L2 Slave Error Read: 0x66 [ 12.267317] SERR = Error response from slave: 0x12 [ 12.267319] Overflow (there may be more errors) - Uncorrectable [ 12.267320] Uncorrectable (this is fatal) [ 12.267326] MISC0 = 0x80000000400000 [ 12.267328] MISC1 = 0x20240000004 [ 12.267332] ADDR = 0x8000000002470088 [ 12.267337] ************************************** [ 12.267370] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 12.267450] Bad mode in Error handler detected on CPU3, code 0xbe000000 -- SError [ 12.267455] Internal error: Oops - bad mode: 0 [#1] PREEMPT SMP [ 12.267462] Modules linked in: [ 12.267473] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.9.140 #1 [ 12.267475] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 12.267476] Hardware name: NVIDIA Jetson AGX Xavier 8GB Developer Kit (DT) [ 12.267483] task: ffffffc1f6b74600 task.stack: ffffffc1f6b8c000 [ 12.267494] PC is at t19x_cpu_enter_state+0x4c/0x118 [ 12.267497] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 12.267499] LR is at t19x_cpu_enter_state+0x1c/0x118 [ 12.267507] pc : [] lr : [] pstate: 808000c5 [ 12.267509] sp : ffffffc1f6b8fe80 [ 12.267519] x29: ffffffc1f6b8fe80 x28: 0000000000000001 [ 12.267526] x27: ffffff8009e76000 x26: ffffff8009841ac8 [ 12.267531] x25: 0000000000000000 x24: 00000002d2abfaa0 [ 12.267536] x23: ffffff8009fea188 x22: ffffffc1ffcd8ad0 [ 12.267539] x21: ffffff8009fea1a0 [ 12.267539] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 12.267542] x20: ffffff800a1bba50 x19: 0000000000000000 x18: 0000000000000004 [ 12.267551] x17: 000000000000000e x16: 0000000000000007 [ 12.267556] x15: 0000000000000000 x14: 0000000000000019 [ 12.267561] x13: 00000000000246ed x12: 071c71c71c71c71c [ 12.267565] x11: 000000000000000b x10: 0101010101010101 [ 12.267571] x9 : fffffffffffffffc x8 : 7f7f7f7f7f7f7f7f [ 12.267576] x7 : fefefeff646c606d x6 : 00170401e9e1acf4 [ 12.267581] x5 : 742c616901041700 x4 : 8080808000000000 [ 12.267586] x3 : b34b234b0963a000 x2 : 000000000000000b [ 12.267590] x1 : 0000000000000000 x0 : 0000000000000000 [ 12.267592] [ 12.267596] Process swapper/3 (pid: 0, stack limit = 0xffffffc1f6b8c000) [ 12.267598] Call trace: [ 12.267604] [] t19x_cpu_enter_state+0x4c/0x118 [ 12.267608] [] cpuidle_enter_state+0x84/0x380 [ 12.267611] [] cpuidle_enter+0x34/0x48 [ 12.267617] [] call_cpuidle+0x44/0x70 [ 12.267626] [] cpu_startup_entry+0x1b0/0x200 [ 12.267633] [] secondary_start_kernel+0x190/0x1f8 [ 12.267636] [<0000000080f631a4>] 0x80f631a4 [ 12.267641] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 12.267648] ---[ end trace 9173883448b46b3c ]--- [ 12.269823] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 12.269866] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 12.269970] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 12.269995] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 12.270037] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 12.270138] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 12.270161] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 12.270202] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 12.274585] Kernel panic - not syncing: Attempted to kill the idle task! [ 12.274592] SMP: stopping secondary CPUs [ 13.262109] ************************************** [ 13.267070] * For more Internal Decode Help [ 13.271527] * http://nv/cbberr [ 13.274682] * NVIDIA userID is required to access [ 13.279489] ************************************** [ 13.284045] CPU:5, Error:CBB-NOC [ 13.287459] Error Logger : 0 [ 13.290612] ErrLog0 : 0x80030000 [ 13.294282] Transaction Type : RD - Read, Incrementing [ 13.299794] Error Code : SLV [ 13.303032] Error Source : Target [ 13.306707] Error Description : Target error detected by CBB slave [ 13.313100] AXI2APB_1 bridge error: SFIFONE - Status FIFO Not Empty interrupt[ 13.320705] AXI2APB_1 bridge error: TIM - Timer(Timeout) interrupt [ 13.327182] Packet header Lock : 0 [ 13.329340] SMP: failed to stop secondary CPUs 3,5 [ 13.329355] Memory Limit: none bled [ 13.339085] Packet header Le[ 13.342492] Rebooting in 5 seconds.. [ 13.346172] NOC protocol version :[ 13.346172] NOC protocol version : version >= 2.7 [ 13.354743] ErrLog1 : 0x32002e [ 13.357808] ErrLog2 : 0x0 [ 13.360519] RouteId : 0x32002e [ 13.364191] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 13.368920] Targflow : axis_satellite_grout/T/axis_satellite_grout [ 13.375566] TargSubRange : 0 [ 13.378718] SeqId : 0 [ 13.381779] ErrLog3 : 0x2470094 [ 13.385190] ErrLog4 : 0x0 [ 13.387748] Address : 0x2470094 (unknown device) [ 13.392978] ErrLog5 : 0xb89f851 [ 13.396044] Non-Modify : 0x1 [ 13.399717] AXI ID : 0x17 [ 13.402431] Master ID : CCPLEX [ 13.406015] Security Group(GRPSEC): 0x7e [ 13.410041] Cache : 0x1 -- Device [ 13.413804] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 13.420454] FALCONSEC : 0x0 [ 13.423344] Virtual Queuing Channel(VQC): 0x0 [ 13.428241] ************************************** [ 13.432971] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 13.441477] ************************************** [ 13.446527] RAS Error in SCF:IOB, ERRSELR_EL1=1025: [ 13.451083] Status = 0xf4009604 [ 13.454758] IERR = CBB Interface Error: 0x96 [ 13.459215] SERR = Assertion Failure: 0x4 [ 13.463156] Uncorrectable (this is fatal) [ 13.467445] MISC0 = 0x40 [ 13.469889] MISC1 = 0x264a4445e1 [ 13.473047] ADDR = 0x8000000002470094 [ 13.476988] ************************************** [ 13.482056] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 13.491260] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 13.499495] Bad mode in Error handler detected on CPU5, code 0xbe000000 -- SError [ 13.507081] Internal error: Oops - bad mode: 0 [#2] PREEMPT SMP [ 13.512767] Modules linked in: [ 13.515923] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G D 4.9.140 #1 [ 13.523004] Hardware name: NVIDIA Jetson AGX Xavier 8GB Developer Kit (DT) [ 13.529657] task: ffffffc1f6b76200 task.stack: ffffffc1f6b94000 [ 13.535873] PC is at t19x_cpu_enter_state+0x4c/0x118 [ 13.540510] LR is at t19x_cpu_enter_state+0x1c/0x118 [ 13.545321] pc : [] lr : [] pstate: 80c000c5 [ 13.553015] sp : ffffffc1f6b97e80 [ 13.556428] x29: ffffffc1f6b97e80 x28: 0000000000000001 [ 13.562026] x27: ffffff8009e76000 x26: ffffff8009841ac8 [ 13.567549] x25: 0000000000000000 x24: 00000002d2ac7160 [ 13.573488] x23: ffffff8009fea188 x22: ffffffc1ffd0aad0 [ 13.578924] x21: ffffff8009fea1a0 x20: ffffff800a1bba50 [ 13.584864] x19: 0000000000000000 x18: 0000000000000014 [ 13.590551] x17: 000000000000000e x16: 0000000000000007 [ 13.596151] x15: 0000000000000000 x14: 0000000000000019 [ 13.601838] x13: 000000000002ba26 x12: 071c71c71c71c71c [ 13.607366] x11: 000000000000000b x10: 0101010101010101 [ 13.613138] x9 : fffffffffffffffc x8 : 7f7f7f7f7f7f7f7f [ 13.619164] x7 : fefefeff646c606d x6 : 00170401e9e1acf4 [ 13.624425] x5 : 742c616901041700 x4 : 8080808000000000 [ 13.629762] x3 : b34b234b0963a000 x2 : 000000000000000b [ 13.635351] x1 : 0000000000000000 x0 : 0000000000000000 [ 13.640688] [ 13.642092] Process swapper/5 (pid: 0, stack limit = 0xffffffc1f6b94000) [ 13.648220] Call trace: [ 13.650585] [] t19x_cpu_enter_state+0x4c/0x118 [ 13.656444] [] cpuidle_enter_state+0x84/0x380 [ 13.662043] [] cpuidle_enter+0x34/0x48 [ 13.667120] [] call_cpuidle+0x44/0x70 [ 13.671673] [] cpu_startup_entry+0x1b0/0x200 [ 13.677531] [] secondary_start_kernel+0x190/0x1f8 [ 13.683135] [<0000000080f631a4>] 0x80f631a4 [ 13.686899] ---[ end trace 9173883448b46b3d ]--- [ 18.350612] SMP: stopping secondary CPUs [ 19.384888] SMP: failed to stop secondary CPUs 3,5 ÿäÿâ [0000.055] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.063] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.069] I> Boot-mode: Coldboot [0000.072] I> Chip revision : A02 [0000.075] I> Bootrom patch version : 15 (correctly patched) [0000.080] I> ATE fuse revision : 0x200 [0000.083] I> Ram repair fuse : 0x0 [0000.086] I> Ram Code : 0x4 [0000.089] I> rst_source : 0x2 [0000.092] I> rst_level : 0x1 [0000.095] I> Boot-device: eMMC [0000.110] I> sdmmc DDR50 mode [0000.114] W> No valid slot number is found in scratch register [0000.120] W> Return default slot: _a [0000.123] I> Active Boot chain : 0 [0000.126] I> Boot-device: eMMC [0000.130] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.136] I> Temperature = 43500 [0000.139] W> Skipping boost for clk: BPMP_CPU_NIC [0000.143] W> Skipping boost for clk: BPMP_APB [0000.147] W> Skipping boost for clk: AXI_CBB [0000.151] W> Skipping boost for clk: AON_CPU_NIC [0000.156] W> Skipping boost for clk: CAN1 [0000.159] W> Skipping boost for clk: CAN2 [0000.164] I> Boot-device: eMMC [0000.166] I> Boot-device: eMMC [0000.176] I> Sdmmc: HS400 mode enabled [0000.180] I> ECC region[0]: Start:0x0, End:0x0 [0000.185] I> ECC region[1]: Start:0x0, End:0x0 [0000.189] I> ECC region[2]: Start:0x0, End:0x0 [0000.193] I> ECC region[3]: Start:0x0, End:0x0 [0000.197] I> ECC region[4]: Start:0x0, End:0x0 [0000.201] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.207] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.211] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.216] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.220] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.226] E> FAILED: Thermal config [0000.233] E> FAILED: MEMIO rail config [0000.245] I> Boot-device: eMMC [0000.254] I> sdmmc bdev is already initialized [0000.325] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ÿâ [0000.333] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-389501e9) [0000.334] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.335] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.335] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.341] W> device prod register failed [0000.345] I> Boot-device: eMMC [0000.348] I> Boot_device: SDMMC_BOOT instance: 3 [0000.354] I> sdmmc-3 params source = boot args [0000.357] I> sdmmc bdev is already initialized [0000.361] I> sdmmc-3 params source = boot args [0000.369] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.376] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.377] W> No valid slot number is found in scratch register [0000.382] W> Return default slot: _a [0000.385] I> Active Boot chain : 0 [0000.389] I> parsing oem signed section of bpmp-fw header done [0000.394] I> bpmp-fw binary init read from storage [0000.399] I> oem authentication of bpmp-fw header done [0000.406] I> bpmp-fw binary done read from storage [0000.408] I> bpmp-fw: Authentication init Done [0000.413] I> parsing oem signed section of cpubl header done [0000.418] I> cpubl binary init read from storage [0000.423] I> bpmp-fw: Authentication Finalize Done [0000.427] I> oem authentication of cpubl header done [0000.432] I> cpubl binary done read from storage [0000.437] I> cpubl: Authentication init Done [0000.441] I> parsing oem signed section of rce header done [0000.446] I> rce binary init read from storage [0000.451] I> Relocating BR-BCT [0000.453] I> cpubl: Authentication Finalize Done [0000.458] I> oem authentication of rce header done [0000.462] I> rce binary done read from storage [0000.467] I> rce: Authentication init Done [0000.471] I> parsing oem signed section of ape header done [0000.476] I> ape binary init read from storage [0000.480] I> rce: Authentication Finalize Done [0000.485] I> oem authentication of ape header done [0000.489] I> ape binary done read from storage [0000.493] I> ape: Authentication init Done [0000.498] I> parsing oem signed section of tos header done [0000.503] I> tos binary init read from storage [0000.507] I> ape: Authentication Finalize Done [0000.512] I> oem authentication of tos header done [0000.516] I> tos binary done read from storage [0000.520] I> tos: Authentication init Done [0000.524] I> parsing oem signed section of bpmp-fw-dtb header done [0000.530] I> bpmp-fw-dtb binary init read from storage [0000.535] I> tos: Authentication Finalize Done [0000.541] I> oem authentication of bpmp-fw-dtb header done [0000.545] I> bpmp-fw-dtb binary done read from storage [0000.550] I> bpmp-fw-dtb: Authentication init Done [0000.555] I> parsing oem signed section of cpubl-dtb header done [0000.560] I> cpubl-dtb binary init read from storage [0000.565] I> bpmp-fw-dtb: Authentication Finalize Done [0000.601] I> oem authentication of cpubl-dtb header done [0000.601] I> cpubl-dtb binary done read from storage [0000.602] I> cpubl-dtb: Authentication init Done [0000.604] I> parsing oem signed section of eks header done [0000.605] I> eks binary init read from storage [0000.605] I> cpubl-dtb: Authentication Finalize Done [0000.606] I> oem authentication of eks header done [0000.609] I> eks binary done read from storage [0000.614] I> eks: Authentication init Done [0000.618] I> eks: Authentication Finalize Done [0000.622] I> EKB detected (length: 0x410) @ VA:0x5270a400 ÿäNOTICE: BL31: v1.3(release):de895fd9e NOTICE: BL31: Built : 12:15:31, Oct 16 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete ÿâ welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 391 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform_init: bad clk id in clock@cluster1_avfs avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized ÿá [0001.026] I> Welcome to Cboot ÿâWARNING: no registered clock for FMON_NAFLL_CLUSTER1 (id 281) fmon_post initialized ÿá[0001.027] I> Cboot Version: t194-aad9d75e [0001.028] I> CPU-BL Params @ 0xf2820000 [0001.032] I> 0) Base:0x00000000 Size:0x00000000 [0001.036] I> 1) Base:0xf1100000 Size:0x00100000 ÿâclk_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 clk_debugfs initialized emc_debugfs initialized dvs_debugfs initialized ÿá[0001.041] I> 2) Base:0xf2000000 Size:0x00200000ÿâfmon_debugfs_init_one: no clock debugfs node to attach FMON_NAFLL_CLUSTER1 fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ÿá [0001.213] I> 3) Base:0xf1200000 Size:0x00200000 [0001.217] I> 4) Base:0xf1000000 Size:0x00100000 [0001.222] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.226] I> 6) Base:0xf3800000 Size:0x00400000 [0001.231] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.235] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.240] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.244] I> 10) Base:0xf3000000 Size:0x00800000 [0001.249] I> 11) Base:0x40000000 Size:0x00040000 [0001.253] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.258] I> 13) Base:0x40046000 Size:0x00002000 [0001.262] I> 14) Base:0x40048000 Size:0x00002000 [0001.267] I> 15) Base:0xac000000 Size:0x00004000 [0001.271] I> 16) Base:0x4004a000 Size:0x00002000 [0001.276] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.280] I> 18) Base:0x4004c000 Size:0x00002000 [0001.284] I> 19) Base:0xf2200000 Size:0x00600000 [0001.289] I> 20) Base:0x4004e000 Size:0x00002000 [0001.293] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.298] I> 22) Base:0x00000000 Size:0x00000000 [0001.302] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.307] I> 24) Base:0xf6000000 Size:0x02000000 [0001.311] I> 25) Base:0x40050000 Size:0x00002000 [0001.316] I> 26) Base:0x40040000 Size:0x00006000 [0001.320] I> 27) Base:0xf1800000 Size:0x00400000 [0001.325] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.329] I> 29) Base:0xf1400000 Size:0x00400000 [0001.334] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.338] I> 31) Base:0x00000000 Size:0x00000000 [0001.342] I> 32) Base:0xf8000000 Size:0x08000000 [0001.347] I> 33) Base:0x00000000 Size:0x00000000 [0001.351] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.356] I> 35) Base:0xab000000 Size:0x01000000 [0001.360] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.365] I> 37) Base:0xf2800000 Size:0x00800000 [0001.369] I> 38) Base:0x80000000 Size:0x20000000 [0001.374] I> 39) Base:0xb0000000 Size:0x08000000 [0001.378] I> 40) Base:0x00000000 Size:0x00000000 [0001.383] I> 41) Base:0x00000000 Size:0x00000000 [0001.387] I> 42) Base:0x00000000 Size:0x00000000 [0001.392] I> 43) Base:0x00000000 Size:0x00000000 [0001.396] I> 44) Base:0x00000000 Size:0x00000000 [0001.400] I> 45) Base:0x00000000 Size:0x00000000 [0001.405] GIC-SPI Target CPU: 0 [0001.408] Interrupts Init done [0001.411] calling constructors [0001.414] initializing heap [0001.416] I> Heap: [0xa0691568 ... 0xab000000] [0001.421] initializing threads [0001.423] initializing timers [0001.426] creating bootstrap completion thread [0001.431] top of bootstrap2() [0001.433] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.438] initializing platform [0001.441] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.446] W> device prod register failed [0001.450] I> Bl_dtb @0xaaf00000 [0001.457] W> "plugin-manager" doesn't exist, creating [0001.458] W> "ids" doesn't exist, creating [0001.462] W> "connection" doesn't exist, creating [0001.467] W> "configs" doesn't exist, creating [0001.480] I> Find /i2c@3160000's alias i2c0 [0001.480] I> Reading eeprom i2c=0 address=0x50 [0001.506] I> Device at /i2c@3160000:0x50 [0001.506] I> Reading eeprom i2c=0 address=0x56 [0001.507] E> I2C: slave not found in slaves. [0001.507] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0001.508] E> I2C_DEV: Failed to send register address 0x00000000. [0001.509] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0001.516] E> eeprom: Failed to read I2C slave device [0001.521] I> Eeprom read failed 0x3526070d [0001.526] I> Find /i2c@3180000's alias i2c2 [0001.529] I> Reading eeprom i2c=2 address=0x54 [0001.534] E> I2C: slave not found in slaves. [0001.537] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.545] E> I2C_DEV: Failed to send register address 0x00000000. [0001.551] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.560] E> eeprom: Failed to read I2C slave device [0001.565] I> Eeprom read failed 0x3526070d [0001.569] I> Reading eeprom i2c=2 address=0x57 [0001.573] E> I2C: slave not found in slaves. [0001.577] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.585] E> I2C_DEV: Failed to send register address 0x00000000. [0001.591] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.600] E> eeprom: Failed to read I2C slave device [0001.605] I> Eeprom read failed 0x3526070d [0001.609] I> Reading eeprom i2c=2 address=0x52 [0001.613] E> I2C: slave not found in slaves. [0001.617] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.625] E> I2C_DEV: Failed to send register address 0x00000000. [0001.631] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.640] E> eeprom: Failed to read I2C slave device [0001.645] I> Eeprom read failed 0x3526070d [0001.650] I> Find /i2c@c240000's alias i2c1 [0001.653] I> Reading eeprom i2c=1 address=0x52 [0001.659] E> I2C: slave not found in slaves. [0001.661] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.669] E> I2C_DEV: Failed to send register address 0x00000000. [0001.675] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.684] E> eeprom: Retry to read I2C slave device. [0001.689] E> I2C: slave not found in slaves. [0001.693] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.701] E> I2C_DEV: Failed to send register address 0x00000000. [0001.707] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.716] E> eeprom: Failed to read I2C slave device [0001.721] I> Eeprom read failed 0x3526070d [0001.725] I> Reading eeprom i2c=1 address=0x50 [0001.729] E> I2C: slave not found in slaves. [0001.733] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.741] E> I2C_DEV: Failed to send register address 0x00000000. [0001.747] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.756] E> eeprom: Retry to read I2C slave device. [0001.761] E> I2C: slave not found in slaves. [0001.765] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.773] E> I2C_DEV: Failed to send register address 0x00000000. [0001.779] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.788] E> eeprom: Failed to read I2C slave device [0001.793] I> Eeprom read failed 0x3526070d [0001.797] I> create_pm_ids: id: 2888-0006-400-B, len: 15 [0001.802] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.813] I> Adding plugin-manager/ids/2888-0006-400=/i2c@3160000:module@0x50 [0001.821] W> "i2c@3160000" doesn't exist, creating [0001.825] W> "module@0x50" doesn't exist, creating [0001.832] I> Adding plugin-manager/cvm [0001.833] W> "chip-id" doesn't exist, creating [0001.837] I> Adding plugin-manager/chip-id/A02 [0001.842] I> Plugin-manager override starting [0001.847] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.854] I> node /plugin-manager/fragement-soft-wdt matches [0001.863] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.867] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0001.879] I> Disable plugin-manager status in FDT [0001.879] I> Plugin-manager override finished successfully [0001.880] I> gpio framework initialized [0001.883] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0001.891] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0001.897] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0001.905] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.913] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.919] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.925] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0001.933] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.941] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.947] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.955] I> fixed regulator driver initialized [0001.966] I> register 'maxim' power off handle [0001.967] I> virtual i2c enabled [0001.967] I> registered 'maxim,max20024' pmic [0001.969] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0001.976] I> Boot-device: eMMC [0001.979] I> Boot_device: SDMMC_BOOT instance: 3 [0001.987] I> sdmmc-3 params source = boot args [0001.988] I> create_pm_ids: id: 2888-0006-400-B, len: 15 [0001.993] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.004] I> sdmmc bdev is already initialized [0002.008] I> sdmmc-3 params source = boot args [0002.038] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.051] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.061] I> enabling 'vdd-hdmi-5v0' regulator [0002.067] I> regulator 'vdd-hdmi-5v0' already enabled [0002.067] I> hdmi cable connected [0002.070] W> set volts not configured for 'vdd-1v0' [0002.072] W> set volts not configured for 'vdd-1v8-hs' [0002.076] E> no regulator info present for avdd_hdmi-supply [0002.077] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.081] E> invalid display type [0002.082] E> cannot find any other nvdisp nodes [0002.087] E> I2C: Timeout while polling for bus clear. Last value 0x00000000. [0002.088] E> I2C: Failed to clear bus for instance 6. [0002.091] E> I2C: Failed to clear bus for instance 6. [0002.096] E> I2C_DEV: Failed to initialize instance 6. [0002.101] E> read_edid, invalid i2c handle [0002.108] I> hdmi_enable, starting HDMI initialisation [0002.114] I> hdmi_enable, HDMI initialisation complete [0002.124] I> Load in CBoot Boot Options partition and parse it [0002.131] E> Error -9 when finding node with path /boot-configuration [0002.131] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.134] I> Hit any key to stop autoboot: 4 3 2 1 [0004.142] initializing target [0004.142] calling apps_init() [0004.143] starting app kernel_boot_app [0004.162] I> found decompressor handler: lz4-legacy [0004.163] I> decompressing BMP blob ... [0004.166] I> Kernel type = Normal [0004.167] I> Loading kernel-bootctrl from partition [0004.167] I> Loading partition kernel-bootctrl at 0xa4ac0000 from device(0x1) [0004.174] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.174] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.175] I> ########## SD boot ########## [0004.179] I> No sdcard [0004.181] I> -0 params source = [0004.184] E> Blockdev open: exit error [0004.187] E> SD boot failed, err: 724238353 [0004.191] I> ########## USB boot ########## [0004.200] W> No valid slot number is found in scratch register [0004.201] W> Return default slot: _a [0004.217] I> USB Firmware Version: 60.06 release [0004.273] I> regulator of usb2-0 already enabled [0004.280] I> regulator of usb2-1 already enabled [0004.288] I> regulator of usb2-2 already enabled [0004.299] I> enabling 'vdd-5v-sata' regulator [0005.304] E> failed to initialize xhci controller [0005.304] E> Error in init of XUSB host driver, err: 79790026 [0005.305] E> Failed to initialize device 5-0 [0005.305] E> USB boot failed, err: 2037973030 [0005.305] I> ########## Fixed storage boot ########## [0005.306] I> Already published: 00010003 [0005.306] I> Look for boot partition [0005.309] I> Fallback: assuming 0th partition is boot partition [0005.315] I> Detect filesystem [0005.342] I> Loading extlinux.conf ... [0005.343] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0005.379] I> L4T boot options [0005.380] I> [1]: "primary kernel" [0005.380] I> Enter choice: [0008.381] I> Continuing with default option: 1 [0008.381] I> Loading kernel sig file from rootfs ... [0008.381] I> rootfs path: /sdmmc_user/boot/Image.sig [0008.400] I> Loading kernel binary from rootfs ... [0008.400] I> rootfs path: /sdmmc_user/boot/Image [0008.646] I> Validate kernel ... [0008.646] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0008.975] I> No kernel-dtb binary path [0008.976] W> No valid slot number is found in scratch register [0008.976] W> Return default slot: _a [0008.976] I> A/B: bin_type (38) slot 0 [0008.977] I> Loading kernel-dtb from partition [0008.977] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0008.986] I> Validate kernel-dtb ... [0008.986] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0008.991] I> Loading ramdisk from rootfs ... [0008.992] I> rootfs path: /sdmmc_user/boot/initrd [0009.044] I> Kernel hdr @0xa4ac0000 [0009.045] I> Kernel dtb @0x90000000 [0009.045] I> decompressor handler not found [0009.045] I> Copying kernel image (34398224 bytes) from 0xa4ac0000 to 0x80080000 ... [0009.056] I> Done [0009.057] I> Updated bpmp info to DTB [0009.058] I> Ramdisk: Base: 0x92000000; Size: 0x54eb56 [0009.058] I> Updated initrd info to DTB [0009.059] W> WARN: Fail to override "console=none" in commandline [0009.059] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0009.065] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0009.072] W> No valid slot number is found in scratch register [0009.078] W> Return default slot: _a [0009.081] I> Active slot suffix: [0009.084] I> add_boot_slot_suffix: slot_suffix = [0009.089] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt tegra_fbmem=0x800000@0xa069d000 lut_mem=0x2008@0xa0697000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0009.118] I> Updated bootarg info to DTB [0009.122] W> MAC addr invalid! [0009.125] E> Failed to get WIFI MAC address [0009.129] W> MAC addr invalid! [0009.132] E> Failed to get Bluetooth MAC address [0009.136] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:e5:7e:8e [0009.143] W> "plugin-manager" doesn't exist, creating [0009.148] I> Adding /chosen/plugin-manager/cvm [0009.152] W> "chip-id" doesn't exist, creating [0009.156] I> Adding /chosen/plugin-manager/chip-id [0009.161] W> "configs" doesn't exist, creating [0009.165] I> Adding /chosen/plugin-manager/configs [0009.169] W> "ids" doesn't exist, creating [0009.173] I> Adding /chosen/plugin-manager/ids [0009.178] W> "odm-data" doesn't exist, creating [0009.182] I> Adding /chosen/plugin-manager/odm-data [0009.190] W> "memory" doesn't exist, creating [0009.192] I> [0] START: 0x80000000, END: 0xac000000 [0009.196] I> [1] START: 0xac004000, END: 0xf09d0000 [0009.200] I> [2] START: 0xf09dc000, END: 0xf09e0000 [0009.205] I> dram_block larger than 80000000 [0009.209] I> [3] START: 0x100000000, END: 0x280000000 [0009.214] I> added [base:0x80000000, size:0x2c000000] to /memory [0009.220] I> added [base:0xac200000, size:0x44600000] to /memory [0009.226] I> added [base:0x100000000, size:0x180000000] to /memory [0009.233] I> Updated memory info to DTB [0009.236] E> add_disp_param: failed to get display params for du=1 [0009.242] W> "reset" doesn't exist, creating [0009.246] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0009.250] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0009.255] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0009.260] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0009.265] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0009.269] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0009.274] I> Deleted cpu@6 node in DT [0009.278] I> Deleted cpu@7 node in DT [0009.282] I> Deleted cluster3 node in FDT [0009.285] I> Update arm-pmu in FDT [0009.288] I> - update property: interrupts [0009.292] I> - update property: interrupt-affinity [0009.298] W> "misc-data" doesn't exist, creating [0009.301] I> Boot-device: eMMC [0009.304] I> Add boot-sdmmc to plugin-manager/misc-data [0009.309] I> Add storage-sdmmc to plugin-manager/misc-data [0009.315] W> Unknown storage device [0009.319] I> Add serial number:1423219082119 as DT property [0009.325] I> Plugin-manager override starting [0009.328] I> node /plugin-manager/fragement-tegra-wdt-en matches [0009.335] I> node /plugin-manager/fragement-soft-wdt matches [0009.343] I> node /plugin-manager/fragment-pcie-c5-rp matches [0009.348] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0009.359] I> Disable plugin-manager status in FDT [0009.360] I> Plugin-manager override finished successfully [0009.361] I> tegrabl_load_kernel_and_dtb: Done [0009.383] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140 (trident@trident-Dell) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Tue Dec 8 11:32:22 IST 2020 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a069d000 [ 0.000000] Found lut_mem: 00002008@a0697000 [ 1.736630] ucsi_ccg 1-0008: read version failed [ 1.736774] ucsi_ccg 1-0008: get_fw_info fail,, err=-121 [ 1.789451] ufs_tegra 2450000.ufshci: dme-link-startup: error code 1 [ 1.901731] ufs_tegra 2450000.ufshci: dme-link-startup: error code 1 [ 2.049589] ufs_tegra 2450000.ufshci: dme-link-startup: error code 1 [ 2.161828] ufs_tegra 2450000.ufshci: dme-link-startup: error code 1 [ 2.173431] ufs_tegra 2450000.ufshci: link startup failed 1 [ 2.267796] CPU1: SError detected, daif=1c0, spsr=0x808000c5, mpidr=80000001, esr=be000000 [ 2.267803] CPU5: SError detected, daif=1c0, spsr=0x808000c5, mpidr=80000201, esr=be000000 [ 2.267808] CPU4: SError detected, daif=1c0, spsr=0x808000c5, mpidr=80000200, esr=be000000 [ 2.267818] CPU2: SError detected, daif=1c0, spsr=0x808000c5, mpidr=80000100, esr=be000000 [ 2.267823] CPU3: SError detected, daif=1c0, spsr=0x80c000c5, mpidr=80000101, esr=be000000 [ 2.267835] ************************************** [ 2.267840] CPU:0, Error:CBB-NOC@0x2300000,irq=485 [ 2.267843] * For more Internal Decode Help [ 2.267846] ************************************** [ 2.267848] * http://nv/cbberr [ 2.267850] * For more Internal Decode Help [ 2.267852] * NVIDIA userID is required to access [ 2.267854] * http://nv/cbberr [ 2.267856] ************************************** [ 2.267859] * NVIDIA userID is required to access [ 2.267861] CPU:5, Error:CBB-NOC [ 2.267863] ************************************** [ 2.267867] Error Logger : 0 [ 2.267869] CPU:0, Error:CBB-NOC [ 2.267872] Error Logger : 0 [ 2.267876] ErrLog0 : 0x80030000 [ 2.267879] Transaction Type : RD - Read, Incrementing [ 2.267881] ErrLog0 : 0x80030000 [ 2.267884] Error Code : SLV [ 2.267887] Transaction Type : RD - Read, Incrementing [ 2.267889] Error Source : Target [ 2.267891] Error Code : SLV [ 2.267893] Error Description : Target error detected by CBB slave [ 2.267896] Error Source : Target [ 2.267901] AXI2APB_1 bridge error: SFIFONE - Status FIFO Not Empty interrupt [ 2.267902] Error Description : Target error detected by CBB slave [ 2.267907] AXI2APB_1 bridge error: TIM - Timer(Timeout) interrupt [ 2.267913] AXI2APB_1 bridge error: SFIFONE - Status FIFO Not Empty interrupt [ 2.267913] Packet header Lock : 0 [ 2.267915] Packet header Lock : 0 [ 2.267918] Packet header Len1 : 3 [ 2.267920] Packet header Len1 : 3 [ 2.267923] NOC protocol version : version >= 2.7 [ 2.267925] NOC protocol version : version >= 2.7 [ 2.267927] ErrLog1 : 0x320020 [ 2.267930] ErrLog1 : 0x320020 [ 2.267932] ErrLog2 : 0x0 [ 2.267934] ErrLog2 : 0x0 [ 2.267936] RouteId : 0x320020 [ 2.267939] RouteId : 0x320020 [ 2.267941] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 2.267943] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 2.267946] Targflow : axis_satellite_grout/T/axis_satellite_grout [ 2.267949] Targflow : axis_satellite_grout/T/axis_satellite_grout [ 2.267951] TargSubRange : 0 [ 2.267953] TargSubRange : 0 [ 2.267955] SeqId : 0 [ 2.267956] SeqId : 0 [ 2.267959] ErrLog3 : 0x2470088 [ 2.267961] ErrLog3 : 0x2470088 [ 2.267964] ErrLog4 : 0x0 [ 2.267966] ErrLog4 : 0x0 [ 2.267991] Address : 0x2470088 (unknown device) [ 2.267994] Address : 0x2470088 (unknown device) [ 2.267996] ErrLog5 : 0x809f851 [ 2.267999] ErrLog5 : 0x809f851 [ 2.268001] Non-Modify : 0x1 [ 2.268003] Non-Modify : 0x1 [ 2.268006] AXI ID : 0x10 [ 2.268008] AXI ID : 0x10 [ 2.268010] Master ID : CCPLEX [ 2.268013] Master ID : CCPLEX [ 2.268016] Security Group(GRPSEC): 0x7e [ 2.268018] Security Group(GRPSEC): 0x7e [ 2.268020] Cache : 0x1 -- Device [ 2.268023] Cache : 0x1 -- Device [ 2.268026] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 2.268029] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 2.268031] FALCONSEC : 0x0 [ 2.268033] FALCONSEC : 0x0 [ 2.268036] Virtual Queuing Channel(VQC): 0x0 [ 2.268038] Virtual Queuing Channel(VQC): 0x0 [ 2.268041] ************************************** [ 2.268043] ************************************** [ 2.268047] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 2.268052] CPU0: SError detected, daif=140, spsr=0x60400145, mpidr=80000000, esr=be000000 [ 2.268072] ************************************** [ 2.268075] RAS Error in SCF:IOB, ERRSELR_EL1=1025: [ 2.268077] Status = 0xf4009604 [ 2.268079] IERR = CBB Interface Error: 0x96 [ 2.268082] SERR = Assertion Failure: 0x4 [ 2.268084] Uncorrectable (this is fatal) [ 2.268091] MISC0 = 0x40 [ 2.268092] MISC1 = 0x664a444421 [ 2.268097] ADDR = 0x8000000002470088 [ 2.268104] ************************************** [ 2.268108] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 2.268118] ************************************** [ 2.268120] RAS Error in L2, ERRSELR_EL1=512: [ 2.268122] Status = 0xfc006612 [ 2.268124] IERR = SCF to L2 Slave Error Read: 0x66 [ 2.268130] SERR = Error response from slave: 0x12 [ 2.268133] Overflow (there may be more errors) - Uncorrectable [ 2.268134] Uncorrectable (this is fatal) [ 2.268140] MISC0 = 0x80000000400000 [ 2.268142] MISC1 = 0x20240000001 [ 2.268147] ADDR = 0x8000000002470088 [ 2.268152] ************************************** [ 2.268187] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 2.268272] Bad mode in Error handler detected on CPU5, code 0xbe000000 -- SError [ 2.268277] Internal error: Oops - bad mode: 0 [#1] PREEMPT SMP [ 2.268283] Modules linked in: [ 2.268295] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.9.140 #1 [ 2.268297] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 2.268299] Hardware name: NVIDIA Jetson AGX Xavier 8GB Developer Kit (DT) [ 2.268302] task: ffffffc1f6b76200 task.stack: ffffffc1f6b94000 [ 2.268313] PC is at t19x_cpu_enter_state+0x4c/0x118 [ 2.268316] LR is at t19x_cpu_enter_state+0x1c/0x118 [ 2.268324] pc : [] lr : [] pstate: 808000c5 [ 2.268326] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 2.268327] sp : ffffffc1f6b97e80 [ 2.268342] x29: ffffffc1f6b97e80 x28: 0000000000000001 [ 2.268347] x27: ffffff8009e76000 x26: ffffff8009841ac8 [ 2.268352] x25: 0000000000000000 x24: 000000007eea82e0 [ 2.268357] x23: ffffff8009fea188 x22: ffffffc1ffd0aad0 [ 2.268362] x21: ffffff8009fea1a0 x20: ffffff800a1bba50 [ 2.268366] x19: 0000000000000000 x18: 000000000000000b [ 2.268368] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 2.268373] x17: 000000000000000e x16: 0000000000000007 [ 2.268378] x15: 0000000000000000 x14: 0000000000000019 [ 2.268383] x13: 00000000000f3fc5 x12: 071c71c71c71c71c [ 2.268388] x11: 000000000000000b x10: 0101010101010101 [ 2.268394] x9 : fffffffffffffffc x8 : 7f7f7f7f7f7f7f7f [ 2.268398] x7 : fefefeff646c606d x6 : 00170401e9e1acf4 [ 2.268404] x5 : 742c616901041700 x4 : 8080808000000000 [ 2.268409] x3 : b34b234b0963a000 x2 : 000000000000000b [ 2.268426] x1 : 0000000000000000 x0 : 0000000000000000 [ 2.268428] [ 2.268431] Process swapper/5 (pid: 0, stack limit = 0xffffffc1f6b94000) [ 2.268432] Call trace: [ 2.268438] [] t19x_cpu_enter_state+0x4c/0x118 [ 2.268443] [] cpuidle_enter_state+0x84/0x380 [ 2.268446] [] cpuidle_enter+0x34/0x48 [ 2.268452] [] call_cpuidle+0x44/0x70 [ 2.268455] [] cpu_startup_entry+0x1b0/0x200 [ 2.268461] [] secondary_start_kernel+0x190/0x1f8 [ 2.268464] [<0000000080f631a4>] 0x80f631a4 [ 2.268475] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 2.268478] ---[ end trace 8a2ddb659a672c79 ]--- [ 2.270065] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 2.270108] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 2.270209] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 2.270231] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 2.270271] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 2.270373] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 2.270398] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 2.270439] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 2.274528] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.274536] SMP: stopping secondary CPUs [ 2.998054] ************************************** [ 3.002769] * For more Internal Decode Help [ 3.006968] * http://nv/cbberr [ 3.010380] * NVIDIA userID is required to access [ 3.015189] ************************************** [ 3.019745] CPU:1, Error:BPMP-NOC [ 3.023414] Error Logger : 1 [ 3.026314] ErrLog0 : 0x80030600 [ 3.030239] Transaction Type : RD - Read, Incrementing [ 3.035751] Error Code : TMO [ 3.038731] Error Source : Target NIU [ 3.042931] Error Description : Target time-out error [ 3.048526] Packet header Lock : 0 [ 3.052201] Packet header Len1 : 3 [ 3.055620] NOC protocol version : version >= 2.7 [ 3.060778] ErrLog1 : 0xba400 [ 3.064189] ErrLog2 : 0x0 [ 3.066818] RouteId : 0xba400 [ 3.070314] InitFlow : cpu_p_i/I/0 [ 3.073993] Targflow : cbb_t/T/0 [ 3.077926] TargSubRange : 2 [ 3.081338] SeqId : 0 [ 3.083969] ErrLog3 : 0x260070 [ 3.087463] ErrLog4 : 0x0 [ 3.090268] Address : 0x20e60070 (unknown device) [ 3.095428] ErrLog5 : 0xcfa30 [ 3.098664] Master ID : BPMP [ 3.102077] Security Group(GRPSEC): 0x7d [ 3.106102] Cache : 0x0 -- Non-cacheable/Non-Bufferable) [ 3.111444] Protection : 0x3 -- Privileged, Non-Secure, Data Access [ 3.118093] FALCONSEC : 0x0 [ 3.121501] Virtual Queuing Channel(VQC): 0x0 [ 3.125971] ************************************** [ 3.131045] ************************************** [ 3.136026] * For more Internal Decode Help [ 3.139963] * http://nv/cbberr [ 3.143117] * NVIDIA userID is required to access [ 3.147839] ************************************** [ 3.152651] CPU:1, Error:CBB-NOC [ 3.155717] Error Logger : 0 [ 3.158873] ErrLog0 : 0x80030000 [ 3.162627] Transaction Type : RD - Read, Incrementing [ 3.167789] Error Code : SLV [ 3.171200] Error Source : Target [ 3.174620] Error Description : Target error detected by CBB slave [ 3.181442] AXI2APB_1 bridge error: SFIFONE - Status FIFO Not Empty interrupt[ 3.188618] AXI2APB_1 bridge error: TIM - Timer(Timeout) interrupt [ 3.195093] Packet header Lock : 0 [ 3.198677] Packet header Len1 : 3 [ 3.202178] NOC protocol version : version >= 2.7 [ 3.206906] ErrLog1 : 0x32002c [ 3.210578] ErrLog2 : 0x0 [ 3.213205] RouteId : 0x32002c [ 3.216619] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 3.221688] Targflow : axis_satellite_grout/T/axis_satellite_grout [ 3.227731] TargSubRange : 0 [ 3.231226] SeqId : 0 [ 3.234114] ErrLog3 : 0x2470094 [ 3.237351] ErrLog4 : 0x0 [ 3.239983] Address : 0x2470094 (unknown device) [ 3.245227] ErrLog5 : 0xb09f851 [ 3.248294] Non-Modify : 0x1 [ 3.251963] AXI ID : 0x16 [ 3.254768] Master ID : CCPLEX [ 3.258440] Security Group(GRPSEC): 0x7e [ 3.262554] Cache : 0x1 -- Device [ 3.266489] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 3.273314] FALCONSEC : 0x0 [ 3.276464] Virtual Queuing Channel(VQC): 0x0 [ 3.281102] ************************************** [ 3.286090] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 3.294336] ************************************** [ 3.299388] RAS Error in SCF:IOB, ERRSELR_EL1=1025: [ 3.304202] Status = 0xf4009604 [ 3.307615] IERR = CBB Interface Error: 0x96 [ 3.312077] SERR = Assertion Failure: 0x4 [ 3.316276] Uncorrectable (this is fatal) [ 3.320048] MISC0 = 0x40 [ 3.322752] MISC1 = 0x264a4445a1 [ 3.324733] SMP: failed to stop secondary CPUs 1,5 [ 3.324742] Memory Limit: none bled [ 3.334655] ADDR = 0x800000000[ 3.337805] Rebooting in 5 seconds.. 4 [ 3.341745] *************************[ 3.341745] ************************************** [ 3.350319] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 3.359683] ************************************** [ 3.364491] RAS Error in L2, ERRSELR_EL1=512: [ 3.368518] Status = 0xfc006612 [ 3.372102] IERR = SCF to L2 Slave Error Read: 0x66 [ 3.376914] SERR = Error response from slave: 0x12 [ 3.381556] Overflow (there may be more errors) - Uncorrectable [ 3.387676] Uncorrectable (this is fatal) [ 3.391881] MISC0 = 0x80000000400000 [ 3.395465] MISC1 = 0x20240000000 [ 3.398445] ADDR = 0x8000000002470094 [ 3.402296] ************************************** [ 3.407113] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 3.415267] Bad mode in Error handler detected on CPU1, code 0xbe000000 -- SError [ 3.422679] Internal error: Oops - bad mode: 0 [#2] PREEMPT SMP [ 3.428542] Modules linked in: [ 3.431520] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.9.140 #1 [ 3.438344] Hardware name: NVIDIA Jetson AGX Xavier 8GB Developer Kit (DT) [ 3.445690] task: ffffffc1f6b72a00 task.stack: ffffffc1f6b84000 [ 3.451389] PC is at t19x_cpu_enter_state+0x4c/0x118 [ 3.456371] LR is at t19x_cpu_enter_state+0x1c/0x118 [ 3.461528] pc : [] lr : [] pstate: 808000c5 [ 3.468965] sp : ffffffc1f6b87e80 [ 3.472378] x29: ffffffc1f6b87e80 x28: 0000000000000001 [ 3.477724] x27: ffffff8009e76000 x26: ffffff8009841ac8 [ 3.483750] x25: 0000000000000000 x24: 0000000080590e80 [ 3.489437] x23: ffffff8009fea188 x22: ffffffc1ffca6ad0 [ 3.495125] x21: ffffff8009fea1a0 x20: ffffff800a1bba50 [ 3.500562] x19: 0000000000000000 x18: 0000000000000014 [ 3.506249] x17: 000000000000000e x16: 0000000000000007 [ 3.512099] x15: 0000000000000000 x14: 0000000000000019 [ 3.517624] x13: 000000000023c40b x12: 071c71c71c71c71c [ 3.523311] x11: 000000000000000b x10: 0101010101010101 [ 3.529338] x9 : fffffffffffffffc x8 : 7f7f7f7f7f7f7f7f [ 3.535112] x7 : fefefeff646c606d x6 : 00170401e9e1acf4 [ 3.540624] x5 : 742c616901041700 x4 : 8080808000000000 [ 3.545963] x3 : b34b234b0963a000 x2 : 000000000000000b [ 3.551299] x1 : 0000000000000000 x0 : 0000000000000000 [ 3.556637] [ 3.558040] Process swapper/1 (pid: 0, stack limit = 0xffffffc1f6b84000) [ 3.564168] Call trace: [ 3.566792] [] t19x_cpu_enter_state+0x4c/0x118 [ 3.572134] [] cpuidle_enter_state+0x84/0x380 [ 3.577992] [] cpuidle_enter+0x34/0x48 [ 3.583067] [] call_cpuidle+0x44/0x70 [ 3.587879] [] cpu_startup_entry+0x1b0/0x200 [ 3.593480] [] secondary_start_kernel+0x190/0x1f8 [ 3.599083] [<0000000080f631a4>] 0x80f631a4 [ 3.603107] ---[ end trace 8a2ddb659a672c7a ]--- [ 8.357535] SMP: stopping secondary CPUs [ 9.389740] SMP: failed to stop secondary CPUs 1,5 ÿäÿâ [0000.055] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.063] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.069] I> Boot-mode: Coldboot [0000.072] I> Chip revision : A02 [0000.075] I> Bootrom patch version : 15 (correctly patched) [0000.080] I> ATE fuse revision : 0x200 [0000.083] I> Ram repair fuse : 0x0 [0000.086] I> Ram Code : 0x4 [0000.089] I> rst_source : 0x2 [0000.092] I> rst_level : 0x1 [0000.095] I> Boot-device: eMMC [0000.110] I> sdmmc DDR50 mode [0000.114] W> No valid slot number is found in scratch register [0000.120] W> Return default slot: _a [0000.123] I> Active Boot chain : 0 [0000.126] I> Boot-device: eMMC [0000.130] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.136] I> Temperature = 46000 [0000.139] W> Skipping boost for clk: BPMP_CPU_NIC [0000.143] W> Skipping boost for clk: BPMP_APB [0000.147] W> Skipping boost for clk: AXI_CBB [0000.151] W> Skipping boost for clk: AON_CPU_NIC [0000.156] W> Skipping boost for clk: CAN1 [0000.159] W> Skipping boost for clk: CAN2 [0000.164] I> Boot-device: eMMC [0000.166] I> Boot-device: eMMC [0000.176] I> Sdmmc: HS400 mode enabled [0000.180] I> ECC region[0]: Start:0x0, End:0x0 [0000.184] I> ECC region[1]: Start:0x0, End:0x0 [0000.189] I> ECC region[2]: Start:0x0, End:0x0 [0000.193] I> ECC region[3]: Start:0x0, End:0x0 [0000.197] I> ECC region[4]: Start:0x0, End:0x0 [0000.201] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.207] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.211] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.216] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.220] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.225] E> FAILED: Thermal config [0000.233] E> FAILED: MEMIO rail config [0000.245] I> Boot-device: eMMC [0000.254] I> sdmmc bdev is already initialized [0000.325] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ÿâ [0000.333] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-389501e9) [0000.334] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.334] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.335] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.341] W> device prod register failed [0000.345] I> Boot-device: eMMC [0000.348] I> Boot_device: SDMMC_BOOT instance: 3 [0000.354] I> sdmmc-3 params source = boot args [0000.356] I> sdmmc bdev is already initialized [0000.361] I> sdmmc-3 params source = boot args [0000.369] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.376] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.377] W> No valid slot number is found in scratch register [0000.382] W> Return default slot: _a [0000.385] I> Active Boot chain : 0 [0000.389] I> parsing oem signed section of bpmp-fw header done [0000.394] I> bpmp-fw binary init read from storage [0000.399] I> oem authentication of bpmp-fw header done [0000.406] I> bpmp-fw binary done read from storage [0000.408] I> bpmp-fw: Authentication init Done [0000.413] I> parsing oem signed section of cpubl header done [0000.418] I> cpubl binary init read from storage [0000.423] I> bpmp-fw: Authentication Finalize Done [0000.427] I> oem authentication of cpubl header done [0000.432] I> cpubl binary done read from storage [0000.436] I> cpubl: Authentication init Done [0000.441] I> parsing oem signed section of rce header done [0000.446] I> rce binary init read from storage [0000.450] I> Relocating BR-BCT [0000.453] I> cpubl: Authentication Finalize Done [0000.458] I> oem authentication of rce header done [0000.462] I> rce binary done read from storage [0000.466] I> rce: Authentication init Done [0000.471] I> parsing oem signed section of ape header done [0000.476] I> ape binary init read from storage [0000.480] I> rce: Authentication Finalize Done [0000.485] I> oem authentication of ape header done [0000.489] I> ape binary done read from storage [0000.493] I> ape: Authentication init Done [0000.498] I> parsing oem signed section of tos header done [0000.503] I> tos binary init read from storage [0000.507] I> ape: Authentication Finalize Done [0000.512] I> oem authentication of tos header done [0000.516] I> tos binary done read from storage [0000.520] I> tos: Authentication init Done [0000.524] I> parsing oem signed section of bpmp-fw-dtb header done [0000.530] I> bpmp-fw-dtb binary init read from storage [0000.535] I> tos: Authentication Finalize Done [0000.541] I> oem authentication of bpmp-fw-dtb header done [0000.545] I> bpmp-fw-dtb binary done read from storage [0000.550] I> bpmp-fw-dtb: Authentication init Done [0000.555] I> parsing oem signed section of cpubl-dtb header done [0000.560] I> cpubl-dtb binary init read from storage [0000.565] I> bpmp-fw-dtb: Authentication Finalize Done [0000.601] I> oem authentication of cpubl-dtb header done [0000.601] I> cpubl-dtb binary done read from storage [0000.602] I> cpubl-dtb: Authentication init Done [0000.604] I> parsing oem signed section of eks header done [0000.605] I> eks binary init read from storage [0000.605] I> cpubl-dtb: Authentication Finalize Done [0000.606] I> oem authentication of eks header done [0000.609] I> eks binary done read from storage [0000.614] I> eks: Authentication init Done [0000.618] I> eks: Authentication Finalize Done [0000.622] I> EKB detected (length: 0x410) @ VA:0x5270a400 ÿäNOTICE: BL31: v1.3(release):de895fd9e NOTICE: BL31: Built : 12:15:31, Oct 16 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete ÿâ welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 391 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform_init: bad clk id in clock@cluster1_avfs avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized ÿá ÿâmrq initialized ÿá[0001.026] I> Welcome to Cboot [0001.027] I> Cboot Version: t194-aad9d75eÿâWARNING: no registered clock for FMON_NAFLL_CLUSTER1 (id 281) fmon_post initialized ÿá [0001.029] I> CPU-BL Params @ 0xf2820000 [0001.032] I> 0) Base:0x00000000 Size:0x00000000 [0001.037] I> 1) Base:0xf1100000 Size:0x00100000 ÿâclk_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 clk_debugfs initialized emc_debugfs initialized dvs_debugfs initialized ÿá[0001.041] I> 2) Base:0xf2000000 Size:0x00200000ÿâfmon_debugfs_init_one: no clock debugfs node to attach FMON_NAFLL_CLUSTER1 fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ÿá [0001.214] I> 3) Base:0xf1200000 Size:0x00200000 [0001.218] I> 4) Base:0xf1000000 Size:0x00100000 [0001.223] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.227] I> 6) Base:0xf3800000 Size:0x00400000 [0001.232] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.236] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.240] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.245] I> 10) Base:0xf3000000 Size:0x00800000 [0001.249] I> 11) Base:0x40000000 Size:0x00040000 [0001.254] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.258] I> 13) Base:0x40046000 Size:0x00002000 [0001.263] I> 14) Base:0x40048000 Size:0x00002000 [0001.267] I> 15) Base:0xac000000 Size:0x00004000 [0001.272] I> 16) Base:0x4004a000 Size:0x00002000 [0001.276] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.281] I> 18) Base:0x4004c000 Size:0x00002000 [0001.285] I> 19) Base:0xf2200000 Size:0x00600000 [0001.290] I> 20) Base:0x4004e000 Size:0x00002000 [0001.294] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.299] I> 22) Base:0x00000000 Size:0x00000000 [0001.303] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.307] I> 24) Base:0xf6000000 Size:0x02000000 [0001.312] I> 25) Base:0x40050000 Size:0x00002000 [0001.316] I> 26) Base:0x40040000 Size:0x00006000 [0001.321] I> 27) Base:0xf1800000 Size:0x00400000 [0001.325] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.330] I> 29) Base:0xf1400000 Size:0x00400000 [0001.334] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.339] I> 31) Base:0x00000000 Size:0x00000000 [0001.343] I> 32) Base:0xf8000000 Size:0x08000000 [0001.348] I> 33) Base:0x00000000 Size:0x00000000 [0001.352] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.357] I> 35) Base:0xab000000 Size:0x01000000 [0001.361] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.365] I> 37) Base:0xf2800000 Size:0x00800000 [0001.370] I> 38) Base:0x80000000 Size:0x20000000 [0001.374] I> 39) Base:0xb0000000 Size:0x08000000 [0001.379] I> 40) Base:0x00000000 Size:0x00000000 [0001.383] I> 41) Base:0x00000000 Size:0x00000000 [0001.388] I> 42) Base:0x00000000 Size:0x00000000 [0001.392] I> 43) Base:0x00000000 Size:0x00000000 [0001.397] I> 44) Base:0x00000000 Size:0x00000000 [0001.401] I> 45) Base:0x00000000 Size:0x00000000 [0001.406] GIC-SPI Target CPU: 0 [0001.409] Interrupts Init done [0001.411] calling constructors [0001.414] initializing heap [0001.417] I> Heap: [0xa0691568 ... 0xab000000] [0001.421] initializing threads [0001.424] initializing timers [0001.427] creating bootstrap completion thread [0001.431] top of bootstrap2() [0001.434] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.439] initializing platform [0001.442] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.447] W> device prod register failed [0001.451] I> Bl_dtb @0xaaf00000 [0001.458] W> "plugin-manager" doesn't exist, creating [0001.459] W> "ids" doesn't exist, creating [0001.463] W> "connection" doesn't exist, creating [0001.467] W> "configs" doesn't exist, creating [0001.480] I> Find /i2c@3160000's alias i2c0 [0001.480] I> Reading eeprom i2c=0 address=0x50 [0001.506] I> Device at /i2c@3160000:0x50 [0001.506] I> Reading eeprom i2c=0 address=0x56 [0001.506] E> I2C: slave not found in slaves. [0001.507] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0001.508] E> I2C_DEV: Failed to send register address 0x00000000. [0001.508] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0001.516] E> eeprom: Failed to read I2C slave device [0001.520] I> Eeprom read failed 0x3526070d [0001.526] I> Find /i2c@3180000's alias i2c2 [0001.528] I> Reading eeprom i2c=2 address=0x54 [0001.534] E> I2C: slave not found in slaves. [0001.537] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.545] E> I2C_DEV: Failed to send register address 0x00000000. [0001.550] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.560] E> eeprom: Failed to read I2C slave device [0001.564] I> Eeprom read failed 0x3526070d [0001.568] I> Reading eeprom i2c=2 address=0x57 [0001.573] E> I2C: slave not found in slaves. [0001.577] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.585] E> I2C_DEV: Failed to send register address 0x00000000. [0001.590] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.600] E> eeprom: Failed to read I2C slave device [0001.605] I> Eeprom read failed 0x3526070d [0001.609] I> Reading eeprom i2c=2 address=0x52 [0001.613] E> I2C: slave not found in slaves. [0001.617] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.625] E> I2C_DEV: Failed to send register address 0x00000000. [0001.630] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.640] E> eeprom: Failed to read I2C slave device [0001.645] I> Eeprom read failed 0x3526070d [0001.650] I> Find /i2c@c240000's alias i2c1 [0001.653] I> Reading eeprom i2c=1 address=0x52 [0001.658] E> I2C: slave not found in slaves. [0001.661] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.669] E> I2C_DEV: Failed to send register address 0x00000000. [0001.674] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.684] E> eeprom: Retry to read I2C slave device. [0001.689] E> I2C: slave not found in slaves. [0001.693] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.701] E> I2C_DEV: Failed to send register address 0x00000000. [0001.706] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.716] E> eeprom: Failed to read I2C slave device [0001.721] I> Eeprom read failed 0x3526070d [0001.725] I> Reading eeprom i2c=1 address=0x50 [0001.729] E> I2C: slave not found in slaves. [0001.733] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.741] E> I2C_DEV: Failed to send register address 0x00000000. [0001.746] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.756] E> eeprom: Retry to read I2C slave device. [0001.761] E> I2C: slave not found in slaves. [0001.765] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.773] E> I2C_DEV: Failed to send register address 0x00000000. [0001.778] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.788] E> eeprom: Failed to read I2C slave device [0001.793] I> Eeprom read failed 0x3526070d [0001.796] I> create_pm_ids: id: 2888-0006-400-B, len: 15 [0001.802] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.813] I> Adding plugin-manager/ids/2888-0006-400=/i2c@3160000:module@0x50 [0001.820] W> "i2c@3160000" doesn't exist, creating [0001.824] W> "module@0x50" doesn't exist, creating [0001.831] I> Adding plugin-manager/cvm [0001.833] W> "chip-id" doesn't exist, creating [0001.837] I> Adding plugin-manager/chip-id/A02 [0001.841] I> Plugin-manager override starting [0001.846] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.855] I> node /plugin-manager/fragement-soft-wdt matches [0001.864] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.869] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0001.883] I> Disable plugin-manager status in FDT [0001.884] I> Plugin-manager override finished successfully [0001.884] I> gpio framework initialized [0001.886] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0001.891] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0001.897] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0001.905] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.913] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.919] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.925] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0001.932] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.940] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.947] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.954] I> fixed regulator driver initialized [0001.965] I> register 'maxim' power off handle [0001.965] I> virtual i2c enabled [0001.966] I> registered 'maxim,max20024' pmic [0001.969] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0001.975] I> Boot-device: eMMC [0001.978] I> Boot_device: SDMMC_BOOT instance: 3 [0001.987] I> sdmmc-3 params source = boot args [0001.987] I> create_pm_ids: id: 2888-0006-400-B, len: 15 [0001.992] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.003] I> sdmmc bdev is already initialized [0002.007] I> sdmmc-3 params source = boot args [0002.038] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.051] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.062] I> enabling 'vdd-hdmi-5v0' regulator [0002.068] I> regulator 'vdd-hdmi-5v0' already enabled [0002.068] I> hdmi cable connected [0002.070] W> set volts not configured for 'vdd-1v0' [0002.073] W> set volts not configured for 'vdd-1v8-hs' [0002.077] E> no regulator info present for avdd_hdmi-supply [0002.077] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.082] E> invalid display type [0002.083] E> cannot find any other nvdisp nodes [0002.088] E> I2C: Timeout while polling for bus clear. Last value 0x00000000. [0002.088] E> I2C: Failed to clear bus for instance 6. [0002.092] E> I2C: Failed to clear bus for instance 6. [0002.096] E> I2C_DEV: Failed to initialize instance 6. [0002.101] E> read_edid, invalid i2c handle [0002.109] I> hdmi_enable, starting HDMI initialisation [0002.114] I> hdmi_enable, HDMI initialisation complete [0002.125] I> Load in CBoot Boot Options partition and parse it [0002.132] E> Error -9 when finding node with path /boot-configuration [0002.132] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.135] I> Hit any key to stop autoboot: 4 3 2 1 [0004.142] initializing target [0004.142] calling apps_init() [0004.143] starting app kernel_boot_app [0004.162] I> found decompressor handler: lz4-legacy [0004.163] I> decompressing BMP blob ... [0004.166] I> Kernel type = Normal [0004.167] I> Loading kernel-bootctrl from partition [0004.167] I> Loading partition kernel-bootctrl at 0xa4ac0000 from device(0x1) [0004.174] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.174] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.175] I> ########## SD boot ########## [0004.179] I> No sdcard [0004.181] I> -0 params source = [0004.184] E> Blockdev open: exit error [0004.187] E> SD boot failed, err: 724238353 [0004.191] I> ########## USB boot ########## [0004.200] W> No valid slot number is found in scratch register [0004.201] W> Return default slot: _a [0004.217] I> USB Firmware Version: 60.06 release [0004.273] I> regulator of usb2-0 already enabled [0004.280] I> regulator of usb2-1 already enabled [0004.288] I> regulator of usb2-2 already enabled [0004.298] I> enabling 'vdd-5v-sata' regulator [0005.304] E> failed to initialize xhci controller [0005.304] E> Error in init of XUSB host driver, err: 79790026 [0005.304] E> Failed to initialize device 5-0 [0005.305] E> USB boot failed, err: 2037973030 [0005.305] I> ########## Fixed storage boot ########## [0005.305] I> Already published: 00010003 [0005.306] I> Look for boot partition [0005.309] I> Fallback: assuming 0th partition is boot partition [0005.315] I> Detect filesystem [0005.342] I> Loading extlinux.conf ... [0005.342] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0005.379] I> L4T boot options [0005.379] I> [1]: "primary kernel" [0005.380] I> Enter choice: [0008.381] I> Continuing with default option: 1 [0008.381] I> Loading kernel sig file from rootfs ... [0008.381] I> rootfs path: /sdmmc_user/boot/Image.sig [0008.400] I> Loading kernel binary from rootfs ... [0008.400] I> rootfs path: /sdmmc_user/boot/Image [0008.644] I> Validate kernel ... [0008.644] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0008.973] I> No kernel-dtb binary path [0008.974] W> No valid slot number is found in scratch register [0008.974] W> Return default slot: _a [0008.974] I> A/B: bin_type (38) slot 0 [0008.975] I> Loading kernel-dtb from partition [0008.975] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0008.984] I> Validate kernel-dtb ... [0008.984] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0008.989] I> Loading ramdisk from rootfs ... [0008.990] I> rootfs path: /sdmmc_user/boot/initrd [0009.042] I> Kernel hdr @0xa4ac0000 [0009.043] I> Kernel dtb @0x90000000 [0009.043] I> decompressor handler not found [0009.043] I> Copying kernel image (34398224 bytes) from 0xa4ac0000 to 0x80080000 ... [0009.054] I> Done [0009.055] I> Updated bpmp info to DTB [0009.056] I> Ramdisk: Base: 0x92000000; Size: 0x54eb56 [0009.056] I> Updated initrd info to DTB [0009.056] W> WARN: Fail to override "console=none" in commandline [0009.057] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0009.063] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0009.070] W> No valid slot number is found in scratch register [0009.076] W> Return default slot: _a [0009.079] I> Active slot suffix: [0009.082] I> add_boot_slot_suffix: slot_suffix = [0009.087] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt tegra_fbmem=0x800000@0xa069d000 lut_mem=0x2008@0xa0697000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0009.116] I> Updated bootarg info to DTB [0009.120] W> MAC addr invalid! [0009.123] E> Failed to get WIFI MAC address [0009.127] W> MAC addr invalid! [0009.130] E> Failed to get Bluetooth MAC address [0009.134] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:e5:7e:8e [0009.141] W> "plugin-manager" doesn't exist, creating [0009.146] I> Adding /chosen/plugin-manager/cvm [0009.150] W> "chip-id" doesn't exist, creating [0009.154] I> Adding /chosen/plugin-manager/chip-id [0009.159] W> "configs" doesn't exist, creating [0009.163] I> Adding /chosen/plugin-manager/configs [0009.168] W> "ids" doesn't exist, creating [0009.172] I> Adding /chosen/plugin-manager/ids [0009.176] W> "odm-data" doesn't exist, creating [0009.180] I> Adding /chosen/plugin-manager/odm-data [0009.188] W> "memory" doesn't exist, creating [0009.190] I> [0] START: 0x80000000, END: 0xac000000 [0009.194] I> [1] START: 0xac004000, END: 0xf09d0000 [0009.198] I> [2] START: 0xf09dc000, END: 0xf09e0000 [0009.203] I> dram_block larger than 80000000 [0009.207] I> [3] START: 0x100000000, END: 0x280000000 [0009.212] I> added [base:0x80000000, size:0x2c000000] to /memory [0009.218] I> added [base:0xac200000, size:0x44600000] to /memory [0009.224] I> added [base:0x100000000, size:0x180000000] to /memory [0009.231] I> Updated memory info to DTB [0009.234] E> add_disp_param: failed to get display params for du=1 [0009.240] W> "reset" doesn't exist, creating [0009.244] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0009.249] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0009.253] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0009.258] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0009.263] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0009.267] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0009.272] I> Deleted cpu@6 node in DT [0009.276] I> Deleted cpu@7 node in DT [0009.280] I> Deleted cluster3 node in FDT [0009.283] I> Update arm-pmu in FDT [0009.286] I> - update property: interrupts [0009.290] I> - update property: interrupt-affinity [0009.296] W> "misc-data" doesn't exist, creating [0009.299] I> Boot-device: eMMC [0009.302] I> Add boot-sdmmc to plugin-manager/misc-data [0009.308] I> Add storage-sdmmc to plugin-manager/misc-data [0009.313] W> Unknown storage device [0009.316] I> Add serial number:1423219082119 as DT property [0009.323] I> Plugin-manager override starting [0009.326] I> node /plugin-manager/fragement-tegra-wdt-en matches [0009.333] I> node /plugin-manager/fragement-soft-wdt matches [0009.341] I> node /plugin-manager/fragment-pcie-c5-rp matches [0009.346] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0009.357] I> Disable plugin-manager status in FDT [0009.357] I> Plugin-manager override finished successfully [0009.359] I> tegrabl_load_kernel_and_dtb: Done [0009.381] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140 (trident@trident-Dell) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Tue Dec 8 11:32:22 IST 2020 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a069d000 [ 0.000000] Found lut_mem: 00002008@a0697000 [ 1.759736] ucsi_ccg 1-0008: read version failed [ 1.759883] ucsi_ccg 1-0008: get_fw_info fail,, err=-121 [ 1.820407] ufs_tegra 2450000.ufshci: dme-link-startup: error code 1 [ 1.932386] ufs_tegra 2450000.ufshci: dme-link-startup: error code 1 [ 2.076456] ufs_tegra 2450000.ufshci: dme-link-startup: error code 1 [ 2.188345] ufs_tegra 2450000.ufshci: dme-link-startup: error code 1 [ 2.200295] ufs_tegra 2450000.ufshci: link startup failed 1 [ 2.294469] CPU0: SError detected, daif=1c0, spsr=0x80c000c5, mpidr=80000000, esr=be000000 [ 2.294489] CPU4: SError detected, daif=1c0, spsr=0x80c000c5, mpidr=80000200, esr=be000000 [ 2.294494] CPU5: SError detected, daif=1c0, spsr=0x808000c5, mpidr=80000201, esr=be000000 [ 2.294503] CPU2: SError detected, daif=1c0, spsr=0x808000c5, mpidr=80000100, esr=be000000 [ 2.294508] CPU3: SError detected, daif=1c0, spsr=0x808000c5, mpidr=80000101, esr=be000000 [ 2ÿâsafereg_poll_timer_cb: poll interval 124 above target 100 ÿá.294513] CPU1: SError detected, daif=140, spsr=0x60400145, mpidr=80000001, esr=be000000 [ 2.294520] ************************************** [ 2.294521] * For more Internal Decode Help [ 2.294523] * http://nv/cbberr [ 2.294525] * NVIDIA userID is required to access [ 2.294526] ************************************** [ 2.294528] CPU:4, Error:CBB-NOC [ 2.294531] Error Logger : 0 [ 2.294539] ErrLog0 : 0x80030000 [ 2.294541] Transaction Type : RD - Read, Incrementing [ 2.294542] Error Code : SLV [ 2.294545] Error Source : Target [ 2.294547] Error Description : Target error detected by CBB slave [ 2.294555] AXI2APB_1 bridge error: SFIFONE - Status FIFO Not Empty interrupt [ 2.294562] AXI2APB_1 bridge error: TIM - Timer(Timeout) interrupt [ 2.294562] Packet header Lock : 0 [ 2.294563] Packet header Len1 : 3 [ 2.294565] NOC protocol version : version >= 2.7 [ 2.294567] ErrLog1 : 0x32002c [ 2.294568] ErrLog2 : 0x0 [ 2.294570] RouteId : 0x32002c [ 2.294573] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 2.294575] Targflow : axis_satellite_grout/T/axis_satellite_grout [ 2.294576] TargSubRange : 0 [ 2.294578] SeqId : 0 [ 2.294580] ErrLog3 : 0x2470088 [ 2.294581] ErrLog4 : 0x0 [ 2.294607] Address : 0x2470088 (unknown device) [ 2.294613] ErrLog5 : 0xb09f851 [ 2.294615] Non-Modify : 0x1 [ 2.294617] AXI ID : 0x16 [ 2.294618] Master ID : CCPLEX [ 2.294620] Security Group(GRPSEC): 0x7e [ 2.294622] Cache : 0x1 -- Device [ 2.294624] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 2.294626] FALCONSEC : 0x0 [ 2.294634] Virtual Queuing Channel(VQC): 0x0 [ 2.294637] ************************************** [ 2.294641] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 2.294664] ************************************** [ 2.294667] RAS Error in SCF:IOB, ERRSELR_EL1=1025: [ 2.294669] Status = 0xf4009604 [ 2.294671] IERR = CBB Interface Error: 0x96 [ 2.294673] SERR = Assertion Failure: 0x4 [ 2.294674] Uncorrectable (this is fatal) [ 2.294681] MISC0 = 0x40 [ 2.294683] MISC1 = 0x1a64a4445a3 [ 2.294687] ADDR = 0x8000000002470088 [ 2.294693] ************************************** [ 2.294698] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 2.294708] ************************************** [ 2.294709] RAS Error in L2, ERRSELR_EL1=512: [ 2.294711] Status = 0xfc006612 [ 2.294713] IERR = SCF to L2 Slave Error Read: 0x66 [ 2.294715] SERR = Error response from slave: 0x12 [ 2.294716] Overflow (there may be more errors) - Uncorrectable [ 2.294718] Uncorrectable (this is fatal) [ 2.294724] MISC0 = 0x100000000400000 [ 2.294725] MISC1 = 0x40240000006 [ 2.294730] ADDR = 0x8000000002470088 [ 2.294735] ************************************** [ 2.294771] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 2.294853] Bad mode in Error handler detected on CPU4, code 0xbe000000 -- SError [ 2.294857] Internal error: Oops - bad mode: 0 [#1] PREEMPT SMP [ 2.294865] Modules linked in: [ 2.294876] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 4.9.140 #1 [ 2.294877] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 2.294879] Hardware name: NVIDIA Jetson AGX Xavier 8GB Developer Kit (DT) [ 2.294881] task: ffffffc1f6b75400 task.stack: ffffffc1f6b90000 [ 2.294892] PC is at t19x_cpu_enter_state+0x4c/0x118 [ 2.294895] LR is at t19x_cpu_enter_state+0x1c/0x118 [ 2.294904] pc : [] lr : [] pstate: 80c000c5 [ 2.294906] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 2.294908] sp : ffffffc1f6b93e80 [ 2.294923] x29: ffffffc1f6b93e80 x28: 0000000000000001 [ 2.294931] x27: ffffff8009e76000 x26: ffffff8009841ac8 [ 2.294935] x25: 0000000000000000 x24: 000000008176d5e0 [ 2.294940] x23: ffffff8009fea188 x22: ffffffc1ffcf1ad0 [ 2.294945] x21: ffffff8009fea1a0 x20: ffffff800a1bba50 [ 2.294951] x19: 0000000000000000 [ 2.294951] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 2.294955] x18: 000000000000000b x17: 000000000000000e x16: 0000000000000007 [ 2.294964] x15: 0000000000000000 x14: 0000000000000019 [ 2.294968] x13: 00000000000d2f33 x12: 071c71c71c71c71c [ 2.294973] x11: 000000000000000b x10: 0101010101010101 [ 2.294978] x9 : fffffffffffffffc x8 : 7f7f7f7f7f7f7f7f [ 2.294983] x7 : fefefeff646c606d x6 : 00170401e9e1acf4 [ 2.294987] x5 : 742c616901041700 x4 : 8080808000000000 [ 2.294992] x3 : b34b234b0963a000 x2 : 000000000000000b [ 2.294996] x1 : 0000000000000000 x0 : 0000000000000000 [ 2.294998] [ 2.295000] Process swapper/4 (pid: 0, stack limit = 0xffffffc1f6b90000) [ 2.295002] Call trace: [ 2.295008] [] t19x_cpu_enter_state+0x4c/0x118 [ 2.295012] [] cpuidle_enter_state+0x84/0x380 [ 2.295016] [] cpuidle_enter+0x34/0x48 [ 2.295021] [] call_cpuidle+0x44/0x70 [ 2.295025] [] cpu_startup_entry+0x1b0/0x200 [ 2.295031] [] secondary_start_kernel+0x190/0x1f8 [ 2.295034] [<0000000080f631a4>] 0x80f631a4 [ 2.295044] ---[ end trace ca1d67b590313dfa ]--- [ 2.296658] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 2.296682] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 2.296724] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 2.296826] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 2.296848] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 2.296887] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 2.296990] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 2.297015] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 2.297057] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 2.301036] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.301044] SMP: stopping secondary CPUs [ 2.870708] ************************************** [ 2.875682] * For more Internal Decode Help [ 2.880139] * http://nv/cbberr [ 2.883375] * NVIDIA userID is required to access [ 2.888101] ************************************** [ 2.892916] CPU:0, Error:BPMP-NOC [ 2.896326] Error Logger : 1 [ 2.899225] ErrLog0 : 0x80030600 [ 2.902894] Transaction Type : RD - Read, Incrementing [ 2.908664] Error Code : TMO [ 2.911644] Error Source : Target NIU [ 2.915845] Error Description : Target time-out error [ 2.921180] Packet header Lock : 0 [ 2.925113] Packet header Len1 : 3 [ 2.928532] NOC protocol version : version >= 2.7 [ 2.933690] ErrLog1 : 0xba400 [ 2.936845] ErrLog2 : 0x0 [ 2.939988] RouteId : 0xba400 [ 2.943228] InitFlow : cpu_p_i/I/0 [ 2.947164] Targflow : cbb_t/T/0 [ 2.950840] TargSubRange : 2 [ 2.953992] SeqId : 0 [ 2.956883] ErrLog3 : 0x260070 [ 2.960376] ErrLog4 : 0x0 [ 2.963197] Address : 0x20e60070 (unknown device) [ 2.968340] ErrLog5 : 0xcfa30 [ 2.971318] Master ID : BPMP [ 2.974731] Security Group(GRPSEC): 0x7d [ 2.978757] Cache : 0x0 -- Non-cacheable/Non-Bufferable) [ 2.984357] Protection : 0x3 -- Privileged, Non-Secure, Data Access [ 2.991264] FALCONSEC : 0x0 [ 2.994156] Virtual Queuing Channel(VQC): 0x0 [ 2.999140] ************************************** [ 3.003958] ************************************** [ 3.008680] * For more Internal Decode Help [ 3.012794] * http://nv/cbberr [ 3.016288] * NVIDIA userID is required to access [ 3.020751] ************************************** [ 3.025564] CPU:0, Error:CBB-NOC [ 3.028890] Error Logger : 0 [ 3.031786] ErrLog0 : 0x80030000 [ 3.035542] Transaction Type : RD - Read, Incrementing [ 3.040703] Error Code : SLV [ 3.043857] Error Source : Target [ 3.047533] Error Description : Target error detected by CBB slave [ 3.054096] AXI2APB_1 bridge error: SFIFONE - Status FIFO Not Empty interrupt[ 3.061530] AXI2APB_1 bridge error: TIM - Timer(Timeout) interrupt [ 3.068006] Packet header Lock : 0 [ 3.071331] Packet header Len1 : 3 [ 3.074831] NOC protocol version : version >= 2.7 [ 3.079819] ErrLog1 : 0x320026 [ 3.083230] ErrLog2 : 0x0 [ 3.086376] RouteId : 0x320026 [ 3.089789] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 3.094602] Targflow : axis_satellite_grout/T/axis_satellite_grout [ 3.100644] TargSubRange : 0 [ 3.104139] SeqId : 0 [ 3.107027] ErrLog3 : 0x2470094 [ 3.110264] ErrLog4 : 0x0 [ 3.113154] Address : 0x2470094 (unknown device) [ 3.117881] ErrLog5 : 0x989f851 [ 3.121464] Non-Modify : 0x1 [ 3.124876] AXI ID : 0x13 [ 3.127939] Master ID : CCPLEX [ 3.131354] Security Group(GRPSEC): 0x7e [ 3.135464] Cache : 0x1 -- Device [ 3.139144] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 3.146226] FALCONSEC : 0x0 [ 3.149376] Virtual Queuing Channel(VQC): 0x0 [ 3.153757] ************************************** [ 3.158743] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncorrectable Errors [ 3.167508] ************************************** [ 3.172043] RAS Error in SCF:IOB, ERRSELR_EL1=1025: [ 3.177114] Status = 0xf4009604 [ 3.180528] IERR = CBB Interface Error: 0x96 [ 3.184991] SERR = Assertion Failure: 0x4 [ 3.188930] Uncorrectable (this is fatal) [ 3.193219] MISC0 = 0x40 [ 3.195665] MISC1 = 0x264a4444e3 [ 3.199079] ADDR = 0x8000000002470094 [ 3.202760] ************************************** [ 3.207830] ras_corecluster_serr_callback:Scanning CoreCluster Error Records for Uncorrectable Errors [ 3.217284] ************************************** [ 3.222176] RAS Error in L2, ERRSELR_EL1=512: [ 3.226553] Status = 0xfc006612 [ 3.229966] IERR = SCF to L2 Slave Error Read: 0x66 [ 3.234520] SERR = Error response from slave: 0x12 [ 3.239331] Overflow (there may be more errors) - Uncorrectable [ 3.245280] Uncorrectable (this is fatal) [ 3.249571] MISC0 = 0x100000000400000 [ 3.253155] MISC1 = 0x40240000000 [ 3.256484] ADDR = 0x8000000002470094 [ 3.260333] ************************************** [ 3.265498] ras_core_serr_callback: Scanning Core Error Records for Uncorrectable Errors [ 3.273478] Bad mode in Error handler detected on CPU0, code 0xbe000000 -- SError [ 3.280633] Internal error: Oops - bad mode: 0 [#2] PREEMPT SMP [ 3.286497] Modules linked in: [ 3.289733] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 4.9.140 #1 [ 3.296558] Hardware name: NVIDIA Jetson AGX Xavier 8GB Developer Kit (DT) [ 3.303903] task: ffffff8009e813c0 task.stack: ffffff8009e70000 [ 3.309858] PC is at t19x_cpu_enter_state+0x4c/0x118 [ 3.314841] LR is at t19x_cpu_enter_state+0x1c/0x118 [ 3.319565] pc : [] lr : [] pstate: 80c000c5 [ 3.327002] sp : ffffff8009e73e30 [ 3.330414] x29: ffffff8009e73e30 x28: 0000000000000001 [ 3.335761] x27: ffffff8009e76000 x26: ffffff8009841ac8 [ 3.341788] x25: 0000000000000000 x24: 0000000083db4300 [ 3.347476] x23: ffffff8009fea188 x22: ffffffc1ffc8dad0 [ 3.353163] x21: ffffff8009fea1a0 x20: ffffff800a1bba50 [ 3.358850] x19: 0000000000000000 [ 3.360477] SMP: failed to stop secondary CPUs 0,4 [ 3.360484] Kernel Offset: disabled [ 3.370409] x18: 00000000000000[ 3.370409] x18: 0000000000000014 [ 3.377145] x17: 000000000000000e .. [ 3.377145] x17: 000000000000000e x16: 0000000000000007 [ 3.386588] x15: 0000000000000000 x14: 0000000000000019 [ 3.392362] x13: 0000000000000735 x12: 071c71c71c71c71c [ 3.397875] x11: 000000000000000b x10: 0101010101010101 [ 3.403212] x9 : fffffffffffffffc x8 : 7f7f7f7f7f7f7f7f [ 3.408299] x7 : fefefeff646c606d x6 : 00170401e9e1acf4 [ 3.413635] x5 : 742c616901041700 x4 : 8080808000000000 [ 3.419225] x3 : b34b234b0963a000 x2 : 000000000000000b [ 3.424562] x1 : 0000000000000000 x0 : 0000000000000000 [ 3.429912] [ 3.431564] Process swapper/0 (pid: 0, stack limit = 0xffffff8009e70000) [ 3.438039] Call trace: [ 3.440669] [] t19x_cpu_enter_state+0x4c/0x118 [ 3.446442] [] cpuidle_enter_state+0x84/0x380 [ 3.452043] [] cpuidle_enter+0x34/0x48 [ 3.457118] [] call_cpuidle+0x44/0x70 [ 3.461930] [] cpu_startup_entry+0x1b0/0x200 [ 3.467534] [] rest_init+0x84/0x90 [ 3.471825] [] start_kernel+0x370/0x384 [ 3.476896] [] __primary_switched+0x80/0x94 [ 3.482497] --[ 8.382139] SMP: stopping secondary CPUs [ 9.414428] SMP: failed to stop secondary CPUs 0,4