[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140 (arvind@jarvis) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08) ) #15 SMP PREEMPT Thu Mar 12 18:17:56 IST 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fef9c000 s61592 r8192 d32616 u102400 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@6 3 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0x ff780000 core_edp_mv=1125 core_edp_ma=4000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29588(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3570308K/4159488K available (15038K kernel code, 2912K rwdata, 6724K rodata, 8576K init, 611K bss, 114044K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f30000 ( 15040 KB) [ 0.000000] .rodata : 0xffffff8008f30000 - 0xffffff80095d0000 ( 6784 KB) [ 0.000000] .init : 0xffffff80095d0000 - 0xffffff8009e30000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e30000 - 0xffffff800a108008 ( 2913 KB) [ 0.000000] .bss : 0xffffff800a108008 - 0xffffff800a1a0d3c ( 612 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001886] Console: colour dummy device 80x25 [ 0.002783] console [tty0] enabled [ 0.002810] kmemleak: Kernel memory leak detector disabled [ 0.002841] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.002874] pid_max: default: 32768 minimum: 301 [ 0.003336] Security Framework initialized [ 0.003574] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003597] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.004805] ftrace: allocating 46907 entries in 184 pages [ 0.176161] ASID allocator initialised with 65536 entries [ 0.216478] tegra-id: chipid=22117. [ 0.216521] tegra-id: opt_subrevision=0. [ 0.216552] Tegra Speedo/IDDQ fuse revision 4 [ 0.216569] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.216586] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.216604] Tegra: CPU Speedo Value 1976, SoC Speedo Value 1885, GPU Speedo Value 1990 [ 0.216625] Tegra: CPU IDDQ Value 1540, SoC IDDQ Value 1920, GPU IDDQ Value 2160 [ 0.216662] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.216689] DTS File Name: /home/arvind/econ/projects/code42/tasks/nano/quickstart/nvidia_kernel/e-camNANO_Kernel/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../har dware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02-camera-ar1335.dts [ 0.216734] DTB Build time: Mar 13 2020 15:40:26 [ 0.265027] CPU1: Booted secondary processor [411fd071] [ 0.296968] CPU2: Booted secondary processor [411fd071] [ 0.328871] CPU3: Booted secondary processor [411fd071] [ 0.328963] Brought up 4 CPUs [ 0.329027] SMP: Total of 4 processors activated. [ 0.329046] CPU features: detected feature: 32-bit EL0 Support [ 0.329329] CPU: All CPU(s) started at EL2 [ 0.329362] alternatives: patching kernel code [ 0.337299] devtmpfs: initialized [ 0.377450] Initilizing CustomIPI irq domain [ 0.377873] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.377922] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.388313] pinctrl core: initialized pinctrl subsystem [ 0.388975] OS set in device tree is not L4T. [ 0.389442] regulator-dummy: no parameters [ 0.389717] Initializing plugin-manager [ 0.389841] Plugin module not found [ 0.390083] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [ 0.390634] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [ 0.392429] node /plugin-manager/fragement@10 match with board >=3448-0000-300 [ 0.396714] NET: Registered protocol family 16 [ 0.398067] pstore: using zlib compression [ 0.398746] console [pstore-1] enabled [ 0.398764] pstore: Registered ramoops as persistent store backend [ 0.398784] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.413044] cpuidle: using governor menu [ 0.417835] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.419612] vdso: 2 pages (1 code @ ffffff8008f37000, 1 data @ ffffff8009e34000) [ 0.419660] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.421539] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.424392] tegra_powergate_init: DONE [ 0.424436] DTS File Name: /home/arvind/econ/projects/code42/tasks/nano/quickstart/nvidia_kernel/e-camNANO_Kernel/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../har dware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02-camera-ar1335.dts [ 0.424484] DTB Build time: Mar 13 2020 15:40:26 [ 0.426579] Tegra reboot handler registered. [ 0.431232] iommu: Adding device tegra-carveouts to group 0 [ 0.431406] platform tegra-carveouts: domain=ffffffc0f9407318 allocates as[0]=ffffffc0f9bf00a8 [ 0.431812] iommu: Adding device smmu_test to group 1 [ 0.431887] platform smmu_test: domain=ffffffc0f9407558 allocates as[0]=ffffffc0f9bf0110 [ 0.432692] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.432775] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.432850] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.432876] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.432916] mc-err: mcerr ops are set to t21x [ 0.442353] iommu: Adding device 70090000.xusb to group 2 [ 0.442678] iommu: Adding device 70006000.serial to group 3 [ 0.442773] platform 70006000.serial: domain=ffffffc0f94d16d8 allocates as[0]=ffffffc0f9bf0178 [ 0.443207] iommu: Adding device 70006040.serial to group 4 [ 0.443495] iommu: Adding device 70006200.serial to group 5 [ 0.443725] iommu: Adding device sound to group 6 [ 0.443793] platform sound: domain=ffffffc0f94d1c18 allocates as[0]=ffffffc0f9bf01e0 [ 0.444361] iommu: Adding device 7000d400.spi to group 7 [ 0.444642] iommu: Adding device 7000d600.spi to group 8 [ 0.444919] iommu: Adding device 70410000.spi to group 9 [ 0.445326] iommu: Adding device 50000000.host1x to group 10 [ 0.445615] iommu: Adding device 54080000.vi to group 11 [ 0.446015] iommu: Adding device 54600000.isp to group 12 [ 0.446288] iommu: Adding device 54680000.isp to group 13 [ 0.446608] iommu: Adding device tegradc.0 to group 14 [ 0.446681] platform tegradc.0: domain=ffffffc0f94deb58 allocates as[0]=ffffffc0f9bf0248 [ 0.447219] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.447560] iommu: Adding device tegradc.1 to group 15 [ 0.447627] platform tegradc.1: domain=ffffffc0f94ded98 allocates as[0]=ffffffc0f9bf02b0 [ 0.448158] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.448418] iommu: Adding device 54340000.vic to group 16 [ 0.448645] iommu: Adding device 544c0000.nvenc to group 17 [ 0.448861] iommu: Adding device 54500000.tsec to group 18 [ 0.449124] iommu: Adding device 54100000.tsecb to group 19 [ 0.449347] iommu: Adding device 54480000.nvdec to group 20 [ 0.449586] iommu: Adding device 54380000.nvjpg to group 21 [ 0.450668] iommu: Adding device 546c0000.i2c to group 22 [ 0.451015] iommu: Adding device 57000000.gpu to group 23 [ 0.451085] platform 57000000.gpu: domain=ffffffc0f94e8d98 allocates as[0]=ffffffc0f9bf0318 [ 0.451146] platform 57000000.gpu: domain=ffffffc0f94e8d98 allocates as[1]=ffffffc0f9bf0380 [ 0.451209] platform 57000000.gpu: domain=ffffffc0f94e8d98 allocates as[2]=ffffffc0f9bf03e8 [ 0.451269] platform 57000000.gpu: domain=ffffffc0f94e8d98 allocates as[3]=ffffffc0f9bf0450 [ 0.452172] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.452215] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.452243] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.452264] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.452284] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.505147] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.505188] tegra-pmc: Clear bootloader IO dpd settings [ 0.505224] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.505307] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.505615] iommu: Adding device 70012000.se to group 24 [ 0.506421] iommu: Adding device 7000c000.i2c to group 25 [ 0.506697] iommu: Adding device 7000c400.i2c to group 26 [ 0.506967] iommu: Adding device 7000c500.i2c to group 27 [ 0.507235] iommu: Adding device 7000c700.i2c to group 28 [ 0.507525] iommu: Adding device 7000d000.i2c to group 29 [ 0.507792] iommu: Adding device 7000d100.i2c to group 30 [ 0.508083] iommu: Adding device sdhci-tegra.2 to group 31 [ 0.508153] platform sdhci-tegra.2: domain=ffffffc0f957ef18 allocates as[0]=ffffffc0f9bf04b8 [ 0.508617] iommu: Adding device sdhci-tegra.0 to group 32 [ 0.508689] platform sdhci-tegra.0: domain=ffffffc0f9595198 allocates as[0]=ffffffc0f9bf0520 [ 0.509569] iommu: Adding device 700d0000.xudc to group 33 [ 0.512727] vdd-ac-bat: 5000 mV [ 0.513170] vdd-5v0-sys: 5000 mV [ 0.514157] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.514221] vdd-5v0-hdmi: 5000 mV [ 0.514631] vdd-1v8-sys: 1800 mV [ 0.515048] vdd-fan: supplied by vdd-5v0-sys [ 0.515122] vdd-fan: 5000 mV [ 0.515532] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.515580] vdd-usb-vbus: 5000 mV [ 0.516106] vdd-usb-vbus2: 5000 mV [ 0.545803] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.548254] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.550317] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.550359] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.550411] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.550860] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.558689] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.559086] SCSI subsystem initialized [ 0.559613] usbcore: registered new interface driver usbfs [ 0.559688] usbcore: registered new interface driver hub [ 0.559783] usbcore: registered new device driver usb [ 0.564610] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.569238] vdd-core: 600 <--> 1162 mV at 1125 mV [ 0.569390] random: fast init done [ 0.570152] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.573038] vdd-ddr-1v1: 1150 mV [ 0.576892] vdd-pre-reg-1v35: 1350 mV [ 0.580893] vdd-1v8: 1800 mV [ 0.584890] avdd-sys-1v2: 1200 mV [ 0.588892] vdd-pex-1v0: 1050 mV [ 0.589466] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.589975] max77620-ldo3: at 3100 mV [ 0.592890] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.593398] max77620-ldo5: at 3100 mV [ 0.596893] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.600887] avdd-1v05-pll: 1050 mV [ 0.604891] avdd-io-hdmi-dp: 1050 mV [ 0.606064] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.606340] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.607688] max77620 4-003c: max77620 probe successful [ 0.610685] media: Linux media interface: v0.10 [ 0.610765] Linux video capture interface: v2.00 [ 0.611677] pps_core: LinuxPPS API ver. 1 registered [ 0.611709] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.611753] PTP clock support registered [ 0.615962] tegra_fiq_debugger_init: found FIQ source (IRQ 99) [ 0.622596] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.623456] Advanced Linux Sound Architecture Driver Initialized. [ 0.624126] Bluetooth: Core ver 2.22 [ 0.624199] NET: Registered protocol family 31 [ 0.624218] Bluetooth: HCI device and connection manager initialized [ 0.624247] Bluetooth: HCI socket layer initialized [ 0.624270] Bluetooth: L2CAP socket layer initialized [ 0.624310] Bluetooth: SCO socket layer initialized [ 0.626213] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.626259] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.626324] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.626355] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.630058] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.631140] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.631248] vdd-3v3-sys: 3300 mV [ 0.631552] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.632341] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.632834] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.632908] vdd-3v3-sd: 3300 mV [ 0.633901] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.633967] avdd-io-edp-1v05: 1050 mV [ 0.634461] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.634518] vdd-usb-hub-en: 5000 mV [ 0.635816] camchar: rtcpu character device driver loaded [ 0.636583] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:2 cstate: 2 gstate 1 [ 0.637908] clocksource: Switched to clocksource arch_sys_counter [ 0.676529] VFS: Disk quotas dquot_6.6.0 [ 0.676693] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.677192] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.677597] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.677649] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.677975] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.678005] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.678036] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.678093] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.678122] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.678157] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.678180] nvmap_page_pool_init: Total RAM pages: 1011361 [ 0.678200] nvmap_page_pool_init: nvmap page pool size: 126420 pages (493 MB) [ 0.678519] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.678693] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.679521] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.687681] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.688143] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.688416] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.688655] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.688855] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.689156] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.689180] pre_t19x_iso_plat_init(): max_iso_bw=33280000KB [ 0.689645] NET: Registered protocol family 2 [ 0.690752] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.690996] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.691522] TCP: Hash tables configured (established 32768 bind 32768) [ 0.691689] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.691795] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.692238] NET: Registered protocol family 1 [ 0.692916] RPC: Registered named UNIX socket transport module. [ 0.692946] RPC: Registered udp transport module. [ 0.692965] RPC: Registered tcp transport module. [ 0.692983] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.693249] Trying to unpack rootfs image as initramfs... [ 0.930972] Freeing initrd memory: 5432K [ 0.941036] host1x 50000000.host1x: initialized [ 0.942934] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.946205] audit: initializing netlink subsys (disabled) [ 0.946304] audit: type=2000 audit(0.799:1): initialized [ 0.947073] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.957054] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.958640] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.959465] 9p: Installing v9fs 9p2000 file system support [ 0.962794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.962964] io scheduler noop registered [ 0.963269] io scheduler cfq registered (default) [ 0.966285] gic 702f9000.agic: GIC IRQ controller registered [ 0.969292] iommu: Adding device 702ef000.adsp to group 34 [ 0.975954] iommu: Adding device aconnect@702c0000:adsp_audio to group 35 [ 0.976139] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.976745] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x71e8c0f [ 0.976783] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.978654] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.978797] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.978915] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.979128] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 0.979239] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 0.979353] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 0.979468] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 0.979581] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 0.979687] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 0.979798] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 0.985175] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.987083] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.988961] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.990267] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.990640] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.991861] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.992117] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1000000, vi_iso_bw=1250000, max_bw=1250000 [ 0.992399] Adding domain tsec-pd to PM domain host1x-pd [ 0.994864] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 0.995854] tsec 54500000.tsec: initialized [ 0.997473] tsec 54100000.tsecb: initialized [ 0.998231] Adding domain nvdec-pd to PM domain host1x-pd [ 1.002050] nvdec 54480000.nvdec: initialized [ 1.003152] Adding domain vic03-pd to PM domain host1x-pd [ 1.003355] Adding domain msenc-pd to PM domain host1x-pd [ 1.003537] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.008060] falcon 54340000.vic: initialized [ 1.009403] falcon 544c0000.nvenc: initialized [ 1.010808] falcon 54380000.nvjpg: initialized [ 1.015312] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.015468] display board info: id 0x0, fab 0x0 [ 1.015548] generic_infoframe_type: 0x87 [ 1.015710] tegradc tegradc.0: DT parsed successfully [ 1.015773] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0 [ 1.019252] tegradc tegradc.0: probed [ 1.023247] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.027546] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 10 channels [ 1.028391] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.028751] kfuse 7000fc00.kfuse: initialized [ 1.030272] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.031315] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.032733] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.032777] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.033270] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.034586] vdd-gpu: applied init 1000000uV constraint [ 1.034620] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.035091] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.040034] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.040169] No Device Node present for smmu client: serial8250 !! [ 1.040201] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.040264] iommu: Adding device serial8250 to group 36 [ 1.042635] console [ttyS0] disabled [ 1.042737] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.519383] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.923749] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.328131] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.330151] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.436330] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.436341] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.436346] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.436352] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.436358] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.436755] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.446062] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 2.446067] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.446077] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit] [ 2.446097] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit] [ 2.446116] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.446127] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.446133] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.446139] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] [ 2.446521] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.446527] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.415272] console [ttyS0] enabled [ 3.415651] Console: switching to colour frame buffer device 80x30 [ 3.419089] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 3.419437] serial-tegra 70006200.serial: RX in PIO mode [ 3.419524] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 3.420469] [drm] Initialized [ 3.451969] tegradc tegradc.0: fb registered [ 3.456507] brd: module loaded [ 3.457801] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 3.457878] tegradc tegradc.1: No lt-data, using default setting [ 3.457981] tegradc tegradc.1: No hpd-gpio in DT [ 3.458020] tegradc tegradc.1: DT parsed successfully [ 3.458067] tegradc tegradc.1: Display dc.ffffff800d4c0000 registered with id=1 [ 3.459485] tegradc tegradc.1: dpd enable lookup fail:-19 [ 3.965126] Host read timeout at address 545c00c4 [ 3.966301] tegradc tegradc.1: probed [ 4.002739] tegradc tegradc.1: fb registered [ 4.010348] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 4.010578] loop: module loaded [ 4.010677] tegra_profiler: version: 1.134, samples/io: 47/26 [ 4.013994] tegra_profiler: auth: init [ 4.015757] THERMAL EST: found 2 subdevs [ 4.015765] THERMAL EST num_resources: 0 [ 4.015770] [THERMAL EST subdev 0] [ 4.015777] [THERMAL EST subdev 1] [ 4.016218] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 4.016220] THERMAL EST: thz register success. [ 4.016598] THERMAL EST: end of probe, return err: 0 [ 4.017619] hisi_sas: driver version v1.6 [ 4.022184] tegra-qspi 70410000.spi: Prod settings list not found [ 4.027064] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 4.027072] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 4.044229] libphy: Fixed MDIO Bus: probed [ 4.044806] tun: Universal TUN/TAP device driver, 1.6 [ 4.044808] tun: (C) 1999-2004 Max Krasnyansky [ 4.046409] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.046412] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.046466] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 4.046467] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.046514] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 4.046515] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 4.046557] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 4.046560] Copyright(c) 1999 - 2017 Intel Corporation. [ 4.047610] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 4.047639] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 4.061818] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 4.062022] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:ec:25:df from device tree [ 4.062576] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 4.062605] r8168 Copyright (C) 2017 Realtek NIC software team [ 4.062605] This program comes with ABSOLUTELY NO WARRANTY; for details, please see . [ 4.062605] This is free software, and you are welcome to redistribute it under certain conditions; see . [ 4.063150] PPP generic driver version 2.4.2 [ 4.063416] PPP BSD Compression module registered [ 4.063419] PPP Deflate Compression module registered [ 4.063460] PPP MPPE Compression module registered [ 4.063466] NET: Registered protocol family 24 [ 4.063540] usbcore: registered new interface driver r8152 [ 4.063580] usbcore: registered new interface driver asix [ 4.063629] usbcore: registered new interface driver ax88179_178a [ 4.063665] usbcore: registered new interface driver cdc_ether [ 4.063695] usbcore: registered new interface driver net1080 [ 4.063724] usbcore: registered new interface driver cdc_subset [ 4.063752] usbcore: registered new interface driver zaurus [ 4.063801] usbcore: registered new interface driver cdc_ncm [ 4.063976] VFIO - User Level meta-driver version: 0.3 [ 4.065659] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.065683] ehci-pci: EHCI PCI platform driver [ 4.065736] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.065746] ohci-pci: OHCI PCI platform driver [ 4.065789] ohci-platform: OHCI generic platform driver [ 4.068517] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 4.069133] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 4.070560] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f9417800 id [ 4.071756] usbcore: registered new interface driver uas [ 4.071808] usbcore: registered new interface driver usb-storage [ 4.071906] usbcore: registered new interface driver usbserial [ 4.075988] tegra-xudc-new 700d0000.xudc: device count: 1 [ 4.077328] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 4.077341] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 4.077384] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.077635] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.077661] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-05-08 09:42:10 UTC, Version: 50.22 release [ 4.077716] tegra-xusb 70090000.xusb: xHCI Host Controller [ 4.077737] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 4.078652] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 4.078710] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 4.078907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.078914] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.078919] usb usb1: Product: xHCI Host Controller [ 4.078922] usb usb1: Manufacturer: Linux 4.9.140 xhci-hcd [ 4.078926] usb usb1: SerialNumber: 70090000.xusb [ 4.079516] hub 1-0:1.0: USB hub found [ 4.079557] hub 1-0:1.0: 5 ports detected [ 4.080117] tegra-xusb 70090000.xusb: xHCI Host Controller [ 4.080130] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 4.080205] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.080298] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.080303] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.080307] usb usb2: Product: xHCI Host Controller [ 4.080310] usb usb2: Manufacturer: Linux 4.9.140 xhci-hcd [ 4.080313] usb usb2: SerialNumber: 70090000.xusb [ 4.080934] hub 2-0:1.0: USB hub found [ 4.080978] hub 2-0:1.0: 4 ports detected [ 4.081090] mousedev: PS/2 mouse device common for all mice [ 4.081220] usbcore: registered new interface driver xpad [ 4.178009] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 4.327622] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 4.339383] rtc rtc1: alarm rtc device [ 4.339400] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 4.339432] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 4.340091] i2c /dev entries driver [ 4.350075] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 4.391736] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 4.391741] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 4.392226] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.392243] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 4.392252] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 4.392390] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.392400] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 4.392405] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 4.392561] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.392571] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 4.392576] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 4.392764] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 4.393582] tegra_aotag tegra-aotag: Registering sensor 0 [ 4.393648] tegra_aotag tegra-aotag: Invalid temp readout [ 4.393676] tegra_aotag tegra-aotag: Invalid temp readout [ 4.393691] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 4.393700] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 4.394674] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.394694] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 4.394899] tegra_aotag tegra-aotag: Invalid temp readout [ 4.394929] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 4.395342] parse_throttle_dt_data: Num cap clks = 6 [ 4.395347] parse_throttle_dt_data: clk=cclk_g type=2 [ 4.395362] parse_throttle_dt_data: clk=gpu type=4 [ 4.395385] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 4.395406] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 4.395429] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 4.395432] parse_throttle_dt_data: clk=emc type=3 [ 4.396366] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.396528] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.396721] tegra_throttle_probe: probe successful. #cdevs=4 [ 4.397596] FAN dev name: pwm-fan [ 4.397660] FAN:gpio request success. [ 4.397726] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 4.398113] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 4.398130] tegra210-pinctrl 700008d4.pinmux: pin 206 is not registered so it cannot be requested [ 4.398136] tegra210-pinctrl 700008d4.pinmux: pin-206 (tegra-gpio:206) status -22 [ 4.398141] pwm_fan_driver pwm-fan: fan tach gpio request failed [ 4.398361] pwm_fan_driver: probe of pwm-fan failed with error -22 [ 4.399777] device-mapper: uevent: version 1.0.3 [ 4.400366] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 4.406252] tegra210-cpufreq cpufreq: probe()...completed [ 4.406988] sdhci: Secure Digital Host Controller Interface driver [ 4.406989] sdhci: Copyright(c) Pierre Ossman [ 4.406991] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.407412] In sdhci_tegra_probe line 2230 [ 4.407459] In sdhci_tegra_probe line 2253 [ 4.407504] sdhci-tegra sdhci-tegra.2: Got CD GPIO [ 4.407539] In sdhci_tegra_probe line 2258 [ 4.407575] In sdhci_tegra_probe line 2261 [ 4.407576] In sdhci_tegra_probe line 2270 [ 4.407599] In sdhci_tegra_probe line 2277 [ 4.407601] In sdhci_tegra_probe line 2287 [ 4.407848] In sdhci_tegra_probe line 2300 [ 4.407856] In sdhci_tegra_probe line 2309 [ 4.407869] In sdhci_tegra_probe line 2317 [ 4.407878] sdhci-tegra sdhci-tegra.2: Client registration for eMC Successful [ 4.407994] In sdhci_tegra_probe line 2356 [ 4.407996] In sdhci_tegra_probe line 2369 [ 4.408349] In sdhci_tegra_probe line 2431 [ 4.408602] In sdhci_tegra_probe line 2230 [ 4.408630] In sdhci_tegra_probe line 2253 [ 4.408663] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 4.408697] In sdhci_tegra_probe line 2258 [ 4.408733] In sdhci_tegra_probe line 2261 [ 4.408735] In sdhci_tegra_probe line 2270 [ 4.408746] In sdhci_tegra_probe line 2277 [ 4.408747] In sdhci_tegra_probe line 2287 [ 4.408984] In sdhci_tegra_probe line 2300 [ 4.408992] In sdhci_tegra_probe line 2309 [ 4.409002] In sdhci_tegra_probe line 2317 [ 4.409005] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 4.409081] In sdhci_tegra_probe line 2356 [ 4.409082] In sdhci_tegra_probe line 2369 [ 4.409107] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 301 [ 4.409130] In sdhci_tegra_probe line 2431 [ 4.412019] tegra-se 70012000.se: tegra_se_probe: complete [ 4.412652] hidraw: raw HID events driver (C) Jiri Kosina [ 4.413938] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 4.415420] usbcore: registered new interface driver usbhid [ 4.415422] usbhid: USB HID core driver [ 4.440331] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 4.440689] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 4.442475] nvpmodel: initialized successfully [ 4.443696] usbcore: registered new interface driver snd-usb-audio [ 4.443756] No Device Node present for smmu client: snd-soc-dummy !! [ 4.443762] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 4.443779] iommu: Adding device snd-soc-dummy to group 37 [ 4.474138] mmc0: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA 64-bit with 64 bit addr [ 4.474367] mmc1: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 4.475275] OPE platform probe [ 4.475369] OPE platform probe successful [ 4.475777] OPE platform probe [ 4.475861] OPE platform probe successful [ 4.482237] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 4.482278] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.482281] usb 1-2: Product: 4-Port USB 2.1 Hub [ 4.482284] usb 1-2: Manufacturer: Generic [ 4.498264] hub 1-2:1.0: USB hub found [ 4.501550] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 4.501678] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 4.501801] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 4.501957] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 4.502083] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 4.502206] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 4.502330] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 4.502454] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 4.502577] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 4.502699] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 4.505030] hub 1-2:1.0: 4 ports detected [ 4.514281] u32 classifier [ 4.514283] Actions configured [ 4.514355] Initializing XFRM netlink socket [ 4.515091] NET: Registered protocol family 10 [ 4.515856] NET: Registered protocol family 17 [ 4.515866] NET: Registered protocol family 15 [ 4.515941] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.515988] Bluetooth: RFCOMM socket layer initialized [ 4.515997] Bluetooth: RFCOMM ver 1.11 [ 4.516002] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.516006] Bluetooth: HIDP socket layer initialized [ 4.516025] 9pnet: Installing 9P2000 support [ 4.516058] Key type dns_resolver registered [ 4.517260] Registered cp15_barrier emulation handler [ 4.517276] Registered setend emulation handler [ 4.518392] registered taskstats version 1 [ 4.518978] Adding domain ve2-pd to PM domain host1x-pd [ 4.519220] Adding domain ve-pd to PM domain host1x-pd [ 4.521389] isp 54600000.isp: initialized [ 4.522350] isp 54680000.isp: initialized [ 4.532888] last reset is due to power on reset [ 4.532891] KERNEL: PMC reset status reg: 0x0 [ 4.532967] BL: PMC reset status reg: 0x0 [ 4.532969] BL: PMIC poweroff Event Recorder: 0x50 [ 4.535578] tegra-i2c 7000c000.i2c: no acknowledge from address 0x22 [ 4.535613] pca953x 0-0022: failed reading register [ 4.535651] pca953x: probe of 0-0022 failed with error -121 [ 4.541267] tegra-i2c 7000c400.i2c: no acknowledge from address 0x22 [ 4.541294] pca953x 1-0022: failed reading register [ 4.541325] pca953x: probe of 1-0022 failed with error -121 [ 4.546773] tegra-i2c 7000c500.i2c: no acknowledge from address 0x22 [ 4.546804] pca953x 2-0022: failed reading register [ 4.546835] pca953x: probe of 2-0022 failed with error -121 [ 4.553541] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x22 [ 4.553782] pca953x 6-0022: failed reading register [ 4.553811] pca953x: probe of 6-0022 failed with error -121 [ 4.554984] clk_cbus_recalc_rate: no gbus parent [ 4.554988] clk_cbus_round_rate: no gbus parent [ 4.554989] clk_cbus_round_rate: no gbus parent [ 4.554994] clk_cbus_recalc_rate: no gbus parent [ 4.555101] clk_cbus_recalc_rate: no gbus parent [ 4.555103] clk_cbus_round_rate: no gbus parent [ 4.555105] clk_cbus_round_rate: no gbus parent [ 4.555108] clk_cbus_recalc_rate: no gbus parent [ 4.555778] tegra_dvfs: GPU-cap: registered [ 4.555836] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 4.555838] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled [ 4.555840] tegra dvfs: vdd-gpu: nominal 1088mV, offset 708000uV, step 10000uV, scaling enabled [ 4.639306] tegra_dvfs: vdd-gpu-vts: registered [ 4.683376] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 4.684051] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 4.684550] input: gpio-keys as /devices/gpio-keys/input/input0 [ 4.734849] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 4.734888] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:25 UTC (946688425) [ 4.735918] vi 54080000.vi: vi_probe: ++ [ 4.757961] usb 1-2: usb_suspend_both: status 0 [ 4.758041] usb usb1: usb_suspend_both: status 0 [ 4.859337] vi 54080000.vi: initialized [ 4.889369] vi 54080000.vi: subdev nvcsi--4 bound [ 4.889471] vi 54080000.vi: subdev nvcsi--3 bound [ 4.889554] vi 54080000.vi: subdev nvcsi--2 bound [ 4.889638] vi 54080000.vi: subdev nvcsi--1 bound [ 4.891285] Disable partitions left on by BL [ 4.891287] disb [ 4.891333] bwmgr: missing cdev-type property [ 4.891430] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.891436] DRAM derating cdev registered. [ 4.892563] vdd-fan: disabling [ 4.892565] vdd-usb-vbus: disabling [ 4.892567] vdd-usb-vbus2: disabling [ 4.892579] avdd-io-edp-1v05: disabling [ 4.892580] vdd-usb-hub-en: disabling [ 4.893458] ALSA device list: [ 4.893461] #1: tegra-snd-t210ref-mobile-rt565x [ 5.603124] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 5.603146] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 5.617138] tegradc tegradc.1: blank - powerdown [ 5.617396] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input1 [ 5.629718] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 5.629720] Extcon DP: HPD disabled [ 5.629722] hpd: hpd_switch 0 [ 5.629724] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 5.629732] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 5.629737] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 5.666141] Freeing unused kernel memory: 8576K [ 5.689053] L4T-INITRD Build DATE: Sat Jan 1 01:00:26 UTC 2000 [ 5.699357] Root device found: mmcblk0p1 [ 5.715855] mmc1: hw tuning done ... [ 5.719473] mmc1: new ultra high speed SDR50 SDHC card at address aaaa [ 5.726391] mmcblk1: mmc1:aaaa SL16G 14.8 GiB [ 5.740433] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 8.242524] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 8.248359] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 8.570623] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 8.603624] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 8.610332] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.617465] usb 2-1: Product: 4-Port USB 3.1 Hub [ 8.622080] usb 2-1: Manufacturer: Generic [ 8.630044] hub 2-1:1.0: USB hub found [ 8.634670] hub 2-1:1.0: 4 ports detected [ 8.797979] usb 2-1: usb_suspend_both: status 0 [ 8.802663] usb usb2: usb_suspend_both: status 0 [ 11.121983] tegra-xusb 70090000.xusb: entering ELPG [ 11.128104] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 0, speed 0 [ 11.135692] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 3 [ 11.143280] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0 [ 11.152243] tegra-xusb 70090000.xusb: entering ELPG done [ 15.866109] ERROR: mmcblk0p1 not found [ 62.367436] mmc0: Enabling vmmc regulator [ 62.529197] mmc0: host does not support reading read-only switch, assuming write-enable [ 62.543108] random: crng init done [ 65.014472] mmc0: error -123 whilst initialising SD card [ 65.103221] mmc0: host does not support reading read-only switch, assuming write-enable [ 68.555966] mmc0: new high speed SDHC card at address e624 [ 68.561925] mmcblk0: mmc0:e624 SU04G 3.69 GiB [ 68.734129] mmcblk0: p1 p2 [ 77.050511] irq 302: nobody cared (try booting with the "irqpoll" option) [ 77.057294] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.9.140 #15 [ 77.063551] Hardware name: NVIDIA Jetson Nano Developer Kit (DT) [ 77.069546] Call trace: [ 77.071993] [] dump_backtrace+0x0/0x1a8 [ 77.077384] [] show_stack+0x24/0x30 [ 77.082426] [] dump_stack+0x94/0xb8 [ 77.087469] [] __report_bad_irq+0x40/0xf0 [ 77.093031] [] note_interrupt+0x214/0x2e8 [ 77.098593] [] handle_irq_event_percpu+0x50/0x60 [ 77.104761] [] handle_irq_event+0x50/0x80 [ 77.110324] [] handle_edge_irq+0x120/0x1b0 [ 77.115972] [] generic_handle_irq+0x34/0x50 [ 77.121709] [] tegra_gpio_irq_handler+0x134/0x1f8 [ 77.127964] [] generic_handle_irq+0x34/0x50 [ 77.133699] [] __handle_domain_irq+0x68/0xc0 [ 77.139520] [] gic_handle_irq+0x5c/0xb0 [ 77.144908] [] el1_irq+0xe8/0x18c [ 77.149778] [] _raw_spin_unlock_irqrestore+0x34/0x60 [ 77.156295] [] update_group_capacity+0x204/0x288 [ 77.162463] [] find_busiest_group+0x144/0x1938 [ 77.168457] [] load_balance+0x188/0xa60 [ 77.173845] [] rebalance_domains+0x180/0x2b0 [ 77.179666] [] run_rebalance_domains+0x1a8/0x1f8 [ 77.185833] [] __do_softirq+0x144/0x37c [ 77.191223] [] run_ksoftirqd+0x4c/0x60 [ 77.196526] [] smpboot_thread_fn+0x1d8/0x298 [ 77.202347] [] kthread+0xd8/0xf0 [ 77.207129] [] ret_from_fork+0x10/0x40 [ 77.212428] handlers: [ 77.214696] [] irq_default_primary_handler threaded [] mmc_gpio_cd_irqt [ 77.224438] Disabling IRQ #302