=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.08.28 09:50:22 =~=~=~=~=~=~=~=~=~=~=~= j[0000.329] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.335] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.359] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.365] W> No valid slot number is found in scratch register [0000.371] W> Return default slot: _a [0000.374] I> A/B: bin_type (17) slot 0 [0000.378] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.383] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.388] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.414] I> Binary(17) of size 604720 is loaded @ 0xd796c400 [0000.645] I> Loading SCE-FW ... [0000.648] W> No valid slot number is found in scratch register [0000.653] W> Return default slot: _a [0000.657] I> A/B: bin_type (12) slot 0 [0000.660] I> Loading partition sce-fw at 0xd7300000 [0000.665] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.671] I> Addr: 0xd7300000, start-block: 58784120, num_blocks: 1 [0000.690] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.696] I> Init SCE [0000.698] I> Loading APE-FW ... [0000.701] W> No valid slot number is found in scratch register [0000.707] W> Return default slot: _a [0000.710] I> A/B: bin_type (11) slot 0 [0000.714] I> Loading partition adsp-fw at 0xd7400000 [0000.718] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.724] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.743] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.749] I> Copy BTCM section [0000.752] W> No valid slot number is found in scratch register [0000.758] W> Return default slot: _a [0000.761] I> A/B: bin_type (13) slot 0 [0000.765] I> Loading partition cpu-bootloader at 0x96000000 [0000.770] I> Reading two headers - addr:0x96000000 blocks:1 [0000.775] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.797] I> Binary(13) of size 284816 is loaded @ 0x96000000 [0000.802] W> No valid slot number is found in scratch register [0000.808] W> Return default slot: _a [0000.811] I> A/B: bin_type (20) slot 0 [0000.815] I> Loading partition bootloader-dtb at 0x8520f400 [0000.821] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.826] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.847] I> Binary(20) of size 240128 is loaded @ 0x8520f400 [0000.852] W> No valid slot number is found in scratch register [0000.858] W> Return default slot: _a [0000.861] I> A/B: bin_type (14) slot 0 [0000.865] I> Loading partition secure-os at 0x8530f600 [0000.870] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.876] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.898] I> Binary(14) of size 366000 is loaded @ 0x8530f600 [0000.905] I> TOS boot-params @ 0x85000000 [0000.909] I> TOS params prepared [0000.912] I> Loading EKS ... [0000.915] I> A/B: bin_type (15) slot 0 [0000.919] I> Loading partition eks at 0x8590f800 [0000.923] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.929] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0000.948] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.953] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.958] I> Copied encrypted keys [0000.962] I> boot profiler @ 0x275844000 [0000.966] I> boot profiler for TOS @ 0x275844000 [0000.970] I> Unhalting SCE [0000.973] I> Primary Memory Start:80000000 Size:70000000 [0000.978] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.985] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):41d46a9cf NOTICE: BL31: Built : 21:14:44, Jun 25 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete [0001.358] I> Welcome to Cboot [0001.361] I> Cboot Version: t186-02737b3e [0001.364] I> CPU-BL Params @ 0x275800000 [0001.368] I> 0) Base:0x00000000 Size:0x00000000 [0001.373] I> 1) Base:0x277f00000 Size:0x00100000 [0001.377] I> 2) Base:0x277e00000 Size:0x00100000 [0001.382] I> 3) Base:0x277d00000 Size:0x00100000 [0001.386] I> 4) Base:0x277c00000 Size:0x00100000 [0001.391] I> 5) Base:0x277b00000 Size:0x00100000 [0001.395] I> 6) Base:0x277800000 Size:0x00200000 [0001.400] I> 7) Base:0x277400000 Size:0x00400000 [0001.404] I> 8) Base:0x277a00000 Size:0x00100000 [0001.409] I> 9) Base:0x277300000 Size:0x00100000 [0001.413] I> 10) Base:0x276800000 Size:0x00800000 [0001.418] I> 11) Base:0x30000000 Size:0x00040000 [0001.422] I> 12) Base:0xf0000000 Size:0x00100000 [0001.427] I> 13) Base:0x30040000 Size:0x00001000 [0001.431] I> 14) Base:0x30048000 Size:0x00001000 [0001.435] I> 15) Base:0x30049000 Size:0x00001000 [0001.440] I> 16) Base:0x3004a000 Size:0x00001000 [0001.444] I> 17) Base:0x3004b000 Size:0x00001000 [0001.449] I> 18) Base:0x3004c000 Size:0x00001000 [0001.453] I> 19) Base:0x3004d000 Size:0x00001000 [0001.458] I> 20) Base:0x3004e000 Size:0x00001000 [0001.462] I> 21) Base:0x3004f000 Size:0x00001000 [0001.467] I> 22) Base:0x00000000 Size:0x00000000 [0001.471] I> 23) Base:0xf0100000 Size:0x00010000 [0001.475] I> 24) Base:0x00000000 Size:0x00000000 [0001.480] I> 25) Base:0x00000000 Size:0x00000000 [0001.484] I> 26) Base:0x00000000 Size:0x00000000 [0001.489] I> 27) Base:0x00000000 Size:0x00000000 [0001.493] I> 28) Base:0x84400000 Size:0x00400000 [0001.498] I> 29) Base:0x30000000 Size:0x00010000 [0001.502] I> 30) Base:0x278000000 Size:0x08000000 [0001.506] I> 31) Base:0x00000000 Size:0x00000000 [0001.511] I> 32) Base:0x276000000 Size:0x00600000 [0001.515] I> 33) Base:0x80000000 Size:0x70000000 [0001.520] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.524] I> 35) Base:0x00000000 Size:0x00000000 [0001.529] I> 36) Base:0x00000000 Size:0x00000000 [0001.533] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.538] I> 38) Base:0x84000000 Size:0x00400000 [0001.542] I> 39) Base:0x96000000 Size:0x02000000 [0001.547] I> 40) Base:0x85000000 Size:0x01200000 [0001.551] I> 41) Base:0x275800000 Size:0x00500000 [0001.556] I> 42) Base:0x00000000 Size:0x00000000 [0001.560] I> 43) Base:0x00000000 Size:0x00000000 [0001.564] GIC-SPI Target CPU: 4 [0001.568] Interrupts Init done [0001.571] calling constructors [0001.574] initializing heap [0001.577] initializing threads [0001.580] initializing timers [0001.583] creating bootstrap completion thread [0001.588] top of bootstrap2() [0001.591] CPU: ARM Cortex A57 [0001.594] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.599] initializing platform [0001.602] I> Bl_dtb @0x8520f400 [0001.605] I> gpio framework initialized [0001.611] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.619] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.627] I> GPIO framework and drivers are initialized. [0001.632] I> Boot-device: eMMC [0001.639] I> sdmmc bdev is already initialized [0001.670] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.687] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.693] W> opt-in fuse is not set, skip fuse_burning [0001.698] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.703] W> No valid slot number is found in scratch register [0001.709] W> Return default slot: _a [0001.713] I> A/B: bin_type (21) slot 0 [0001.716] I> Loading kernel-dtb from partition [0001.720] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.737] I> Kernel_dtb @0x80000000 [0001.741] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.749] E> I2C: slave not found in slaves. [0001.753] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0001.761] E> I2C_DEV: Failed to send register address 0x00000004. [0001.767] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0001.776] E> tca9539_device_init: failed to write polar reg [0001.781] E> tegrabl_tca9539_init: failed to init device! [0001.786] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.793] E> I2C: slave not found in slaves. [0001.797] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false. [0001.805] E> I2C_DEV: Failed to send register address 0x00000004. [0001.811] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0. [0001.820] E> tca9539_device_init: failed to write polar reg [0001.826] E> tegrabl_tca9539_init: failed to init device! [0001.833] I> fixed regulator driver initialized [0001.856] I> register 'maxim' power off handle [0001.861] I> virtual i2c enabled [0001.864] I> registered 'maxim,max77620' pmic [0001.869] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.878] I> Find /i2c@c250000's alias i2c7 [0001.882] I> Reading eeprom i2c=7 address=0x50 [0001.912] I> Device at /i2c@c250000:0x50 [0001.916] I> Reading eeprom i2c=7 address=0x57 [0001.920] E> I2C: slave not found in slaves. [0001.924] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.932] E> I2C_DEV: Failed to send register address 0x00000000. [0001.938] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.947] E> eeprom: Failed to read I2C slave device [0001.952] I> Eeprom read failed 0x3526070d [0001.956] I> Find /i2c@c240000's alias i2c1 [0001.960] I> Reading eeprom i2c=1 address=0x51 [0001.966] E> I2C: slave not found in slaves. [0001.970] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.977] E> I2C_DEV: Failed to send register address 0x00000000. [0001.983] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.993] E> eeprom: Retry to read I2C slave device. [0001.998] E> I2C: slave not found in slaves. [0002.002] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.009] E> I2C_DEV: Failed to send register address 0x00000000. [0002.015] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.025] E> eeprom: Failed to read I2C slave device [0002.030] I> Eeprom read failed 0x3526070d [0002.034] I> Find /i2c@3160000's alias i2c0 [0002.038] I> Reading eeprom i2c=0 address=0x50 [0002.042] E> I2C: slave not found in slaves. [0002.047] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.054] E> I2C_DEV: Failed to send register address 0x00000000. [0002.060] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0002.070] E> eeprom: Failed to read I2C slave device [0002.074] I> Eeprom read failed 0x3526070d [0002.079] I> Find /i2c@3180000's alias i2c2 [0002.083] I> Reading eeprom i2c=2 address=0x54 [0002.087] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.092] C> GPIO driver for chip_id 0x2 could not be found [0002.097] E> cam_eeprom_read: Can't get gpio driver [0002.102] I> Eeprom read failed 0x4d4d000d [0002.106] I> Reading eeprom i2c=2 address=0x57 [0002.110] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.115] C> GPIO driver for chip_id 0x2 could not be found [0002.121] E> cam_eeprom_read: Can't get gpio driver [0002.125] I> Eeprom read failed 0x4d4d000d [0002.129] I> create_pm_ids: id: 3310-1000-D01-B, len: 15 [0002.134] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.158] I> regulator 'vdd-hdmi' already enabled [0002.169] I> regulator 'vdd-hdmi' already enabled [0002.174] I> hdmi cable connected [0002.179] I> setting 'vdd-pex-1v00' regulator to 1000000 micro volts [0002.186] I> setting 'vdd-1v8' regulator to 1800000 micro volts [0002.194] E> cannot find any other nvdisp nodes [0002.213] I> edid read success [0002.229] I> edid read success [0002.232] I> width = 640, height = 480, frequency = 25174825 [0002.237] I> width = 640, height = 480, frequency = 25174825 [0002.242] I> width = 640, height = 480, frequency = 25174825 [0002.248] I> width = 640, height = 480, frequency = 25174825 [0002.253] I> width = 1920, height = 1080, frequency = 148500000 [0002.259] I> width = 1280, height = 720, frequency = 74250000 [0002.265] I> width = 1920, height = 1080, frequency = 148351648 [0002.270] I> width = 1280, height = 720, frequency = 74175824 [0002.276] I> width = 720, height = 480, frequency = 26973026 [0002.281] I> width = 1920, height = 1080, frequency = 148351648 [0002.287] I> width = 1280, height = 720, frequency = 74175824 [0002.293] I> width = 640, height = 480, frequency = 25174825 [0002.298] I> width = 720, height = 576, frequency = 26973026 [0002.304] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.314] I> hdmi_enable, starting HDMI initialisation [0002.322] I> hdmi_enable, HDMI initialisation complete [0002.334] initializing target [0002.338] calling apps_init() [0002.341] starting app kernel_boot_app [0002.363] I> found decompressor handler: lz4-legacy [0002.367] I> decompressing BMP blob ... [0002.377] I> Kernel type = Normal [0002.381] I> Loading kernel-bootctrl from partition [0002.385] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0002.400] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0002.407] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0002.414] I> ########## Fixed storage boot ########## [0002.419] W> No valid slot number is found in scratch register [0002.424] W> Return default slot: _a [0002.428] I> A/B: bin_type (24) slot 0 [0002.443] I> Boot image size read from image header: 74aba [0002.449] I> Boot image load address: 0x80400000 [0002.453] I> Loading kernel from partition [0002.457] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.417] I> Validate kernel ... [0003.420] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0003.427] I> kernel-dtb is already loaded [0003.431] I> Validate kernel-dtb ... [0003.434] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0003.442] I> Checking boot.img header magic ... [0003.446] I> [OK] [0003.448] I> Kernel hdr @0x80400000 [0003.451] I> Kernel dtb @0x80000000 [0003.454] I> decompressor handler not found [0003.458] I> Copying kernel image (477882 bytes) from 0x80400800 to 0x80600000 ... [0003.466] I> Done [0003.468] I> Move ramdisk (len: 0) from 0x80475800 to 0x947b0000 [0003.475] I> Updated bpmp info to DTB [0003.479] I> Ramdisk: Base: 0x947b0000; Size: 0x0 [0003.484] I> Updated initrd info to DTB [0003.488] W> WARN: Fail to override "console=none" in commandline [0003.493] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.501] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.508] I> disabled_core_mask: 0xffffff0c [0003.512] W> No valid slot number is found in scratch register [0003.518] W> Return default slot: _a [0003.521] I> Active slot suffix: [0003.524] I> add_boot_slot_suffix: slot_suffix = [0003.529] I> Linux Cmdline: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0003.578] I> Updated bootarg info to DTB [0003.582] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:c6:8a:1a [0003.588] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:c6:8a:1b [0003.594] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:c6:8a:1c [0003.601] E> Found no plugin manager ids in source DT [0003.605] W> Add plugin manager ids from board info [0003.610] W> "plugin-manager" doesn't exist, creating [0003.615] W> "ids" doesn't exist, creating [0003.619] W> "connection" doesn't exist, creating [0003.624] W> "configs" doesn't exist, creating [0003.628] I> create_pm_ids: id: 3310-1000-D01-B, len: 15 [0003.633] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.644] I> Adding plugin-manager/ids/3310-1000-D01=/i2c@c250000:module@0x50 [0003.651] W> "i2c@c250000" doesn't exist, creating [0003.656] W> "module@0x50" doesn't exist, creating [0003.662] I> Adding plugin-manager/ids/3310-1000-D01-B [0003.668] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.673] I> Adding plugin-manager/configs/3310-power-config 00 [0003.679] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.685] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.691] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.697] I> Adding plugin-manager/configs/3310-display-config 00 [0003.703] I> Adding plugin-manager/cvm [0003.707] W> "chip-id" doesn't exist, creating [0003.711] I> Adding plugin-manager/chip-id/A02P [0003.716] W> "odm-data" doesn't exist, creating [0003.720] I> Adding /chosen/plugin-manager/odm-data [0003.728] I> added [base:0x80000000, size:0x70000000] to /memory [0003.734] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.740] I> added [base:0x275e00000, size:0x200000] to /memory [0003.746] I> added [base:0x276600000, size:0x200000] to /memory [0003.752] I> added [base:0x277000000, size:0x200000] to /memory [0003.757] I> Updated memory info to DTB [0003.762] E> add_disp_param: failed to get display params for du=1 [0003.769] W> "reset" doesn't exist, creating [0003.773] W> "pmc-reset-reason" doesn't exist, creating [0003.778] W> "pmic-reset-reason" doesn't exist, creating [0003.784] I> Adding ecid(00000001645102841c00000016fd0480) to DT [0003.790] I> disabled_core_mask: 0xffffff0c [0003.799] I> Add serial number:0424718090835 as DT property [0003.807] I> Plugin-manager override starting [0003.812] I> node /plugin-manager/fragement@0 matches [0003.820] I> node /plugin-manager/fragement@4 matches [0003.829] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.844] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.853] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.861] I> node /plugin-manager/fragment-devslp@0 matches [0003.871] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.882] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.889] I> node /plugin-manager/fragment-p3310-c01 matches [0003.897] I> node /plugin-manager/fragment-p3310-c03 matches [0003.912] I> Disable plugin-manager status in FDT [0003.917] I> Plugin-manager override finished successfully [0003.922] I> tegrabl_load_kernel_and_dtb: Done [0003.967] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2016.07-ge6da093be3 (Jun 25 2020 - 21:14:32 -0700) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 2 1 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 897 bytes read in 737 ms (1000 Bytes/s) 1:primary kernel Retrieving file: /boot/initrd 5565615 bytes read in 319 ms (16.6 MiB/s) Retrieving file: /boot/Image 34330632 bytes read in 857 ms (38.2 MiB/s) append: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 Retrieving file: /boot/tegra186-tx2-cti-ASG016-IMX274.dtb 253172 bytes read in 58 ms (4.2 MiB/s) ## Flattened Device Tree blob at 88400000 Booting using the fdt blob at 0x88400000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000088400000, end 0000000088440cf3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (root@tx1-dev2) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Aug 5 17:13:19 EDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@9607d000 [ 0.000000] Found lut_mem2: 00002008@9607a000 [ 0.428867] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966a1400, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.428914] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966a78c0, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.428952] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966ac600, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.428990] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966b1500, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.429028] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966b6580, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.429064] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966ba9c0, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.429101] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966bef80, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.429137] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966c3b00, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.429174] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966c8d00, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.429210] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966cd200, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.532556] mc-err: (255) csr_nvdisplayr: EMEM address decode error [ 0.532573] mc-err: status = 0x20327092; addr = 0x3ffffffc0 [ 0.532585] mc-err: secure: yes, access-type: read [ 0.532602] mc-err: unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 0.532623] mc-err: unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 0.532647] mc-err: unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 0.532668] mc-err: Too many MC errors; throttling prints [ 5.432625] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x965fee00, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.432681] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96607a00, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.432728] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9660da40, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.432773] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96612b80, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.432816] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96618e80, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.432859] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9661e700, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.432902] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96623e40, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.432945] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96628f80, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.432988] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9662ea80, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.433030] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96633f80, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 8.958388] irq 65: nobody cared (try booting with the "irqpoll" option) [ 8.958501] handlers: [ 8.958517] [] tegra_mcerr_hard_irq threaded [] tegra_mcerr_thread [ 8.958542] Disabling IRQ #65 [ 10.442718] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9607a000, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.442779] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9608b480, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.443379] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96096e00, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.443424] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9609c900, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.443469] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960a2540, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.443513] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960a7d80, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.443558] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960ad740, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.443602] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960b3100, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.443647] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960b8d00, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.443691] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960be280, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 13.027764] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.027919] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 13.138085] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.138233] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 13.248416] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.248570] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 13.358741] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.358861] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 13.469038] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.469184] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 13.579348] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.579491] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 13.689646] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.689788] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 13.799950] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.800091] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 13.910259] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.910437] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 14.020602] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 14.020767] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 14.020771] pca9570 2-0024: pca9570_icr_move:i2c write failed [ 14.200285] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 14.200682] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 15.340710] cgroup: cgroup2: unknown option "nsdelegate" [ 17.197127] using random self ethernet address [ 17.208772] using random host ethernet address [ 17.795687] using random self ethernet address [ 17.813643] using random host ethernet address [ 18.387072] CPU1: shutdown [ 18.460773] CPU2: shutdown [ 18.790682] vdd-1v8: voltage operation not allowed [ 18.790693] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.810609] vdd-1v8: voltage operation not allowed [ 18.810619] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.831370] vdd-1v8: voltage operation not allowed [ 18.831380] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.833765] vdd-1v8: voltage operation not allowed [ 18.833772] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.935178] vdd-1v8: voltage operation not allowed [ 18.935189] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.936061] vdd-1v8: voltage operation not allowed [ 18.936068] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.937554] vdd-1v8: voltage operation not allowed [ 18.937559] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) Ubuntu 18.04.4 LTS n-desktop ttyS0 n-desktop login: n Password: Last login: Fri Aug 28 09:44:04 EDT 2020 on ttyS0 Welcome to Ubuntu 18.04.4 LTS (GNU/Linux 4.9.140-tegra aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. 209 packages can be updated. 145 updates are security updates. n@n-desktop:~$ n@n-desktop:~$ n@n-desktop:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (root@tx1-dev2) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Aug 5 17:13:19 EDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@9607d000 [ 0.000000] Found lut_mem2: 00002008@9607a000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 2055168 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 523776 pages, LIFO batch:31 [ 0.000000] Normal zone: 24008 pages used for memmap [ 0.000000] Normal zone: 1531392 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f7036000 s61656 r8192 d32552 u102400 [ 0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29068(88%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7961540K/8220672K available (15294K kernel code, 2934K rwdata, 6688K rodata, 8576K init, 609K bss, 193596K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a13d808 - 0xffffff800a1d5f7c ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.001040] Console: colour dummy device 80x25 [ 0.001045] console [tty0] enabled [ 0.001048] bootconsole [uart8250] disabled [ 0.001055] kmemleak: Kernel memory leak detector disabled [ 0.001064] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001072] pid_max: default: 32768 minimum: 301 [ 0.001378] Security Framework initialized [ 0.001532] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.001536] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002143] ftrace: allocating 47104 entries in 185 pages [ 0.125822] sched-energy: Sched-energy-costs installed from DT [ 0.125832] ASID allocator initialised with 65536 entries [ 0.161103] tegra-id: chipid=21817. [ 0.161109] tegra-id: opt_subrevision=1. [ 0.161126] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.161133] DTS File Name: tegra186-tx2-cti-ASG016-IMX274.dts [ 0.161139] DTB Build time: Aug 5 2020 17:21:12 [ 0.209581] CPU1: Booted secondary processor [4e0f0030] [ 0.241222] CPU2: Booted secondary processor [4e0f0030] [ 0.273010] CPU3: Booted secondary processor [411fd073] [ 0.304991] CPU4: Booted secondary processor [411fd073] [ 0.336992] CPU5: Booted secondary processor [411fd073] [ 0.337046] Brought up 6 CPUs [ 0.337049] SMP: Total of 6 processors activated. [ 0.337054] CPU features: detected feature: 32-bit EL0 Support [ 0.337713] CPU: All CPU(s) started at EL2 [ 0.337745] alternatives: patching kernel code [ 0.347244] devtmpfs: initialized [ 0.372116] Initilizing CustomIPI irq domain [ 0.372300] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.372311] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.373204] pinctrl core: initialized pinctrl subsystem [ 0.373388] OS set in device tree is not L4T. [ 0.373532] regulator-dummy: no parameters [ 0.373667] Initializing plugin-manager [ 0.373721] Plugin module not found [ 0.374106] node /plugin-manager/fragement@0 match with odm-data enable-denver-wdt [ 0.374761] node /plugin-manager/fragement@4 match with odm-data enable-denver-wdt [ 0.375860] node /plugin-manager/fragment-sdwake-p3310-1000-300 match with board >=3310-1000-300 [ 0.376179] node /plugin-manager/fragement-pmon-p3310-1000-300 match with board >=3310-1000-300 [ 0.376414] node /plugin-manager/fragement-pmon-p3310-1000-800 match with board >=3310-1000-800 [ 0.376640] node /plugin-manager/fragment-devslp@0 match with board >=3310-1000-200 [ 0.377200] node /plugin-manager/fragment-p3310-c00-comm match with board >=3310-1000-800 [ 0.377427] node /plugin-manager/fragment-p3310-c00-pmic match with board >=3310-1000-800 [ 0.377621] node /plugin-manager/fragment-p3310-c01 match with board >=3310-1000-900 [ 0.377846] node /plugin-manager/fragment-p3310-c03 match with board >=3310-1000-B00 [ 0.379704] NET: Registered protocol family 16 [ 0.380513] pstore: using zlib compression [ 0.380527] console [pstore-1] enabled [ 0.380530] pstore: Registered ramoops as persistent store backend [ 0.380534] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.400601] cpuidle: using governor menu [ 0.401558] bpmp: waiting for handshake [ 0.401562] bpmp: handshake completed [ 0.401576] bpmp: synchronizing channels [ 0.401589] bpmp: channels synchronized [ 0.401593] bpmp: mail init ok [ 0.403148] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.403153] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.403157] arm-smmu 12000000.iommu: stage 1 translation [ 0.403160] arm-smmu 12000000.iommu: stage 2 translation [ 0.403163] arm-smmu 12000000.iommu: nested translation [ 0.403169] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.403175] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.403179] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.403183] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.403187] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.405086] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000) [ 0.405097] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.407839] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.408922] Registering BPMP clocks... [ 0.409009] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.409502] Serial: AMBA PL011 UART driver [ 0.410615] tegra_powergate_init: DONE [ 0.410623] DTS File Name: tegra186-tx2-cti-ASG016-IMX274.dts [ 0.410628] DTB Build time: Aug 5 2020 17:21:12 [ 0.411913] Tegra reboot handler registered. [ 0.413094] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.413153] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.413165] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.413168] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.413170] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.413312] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.413322] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.413605] iommu: Adding device 3460000.sdhci to group 0 [ 0.414207] iommu: Adding device 3400000.sdhci to group 1 [ 0.415193] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.415205] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.415601] iommu: Adding device 3160000.i2c to group 3 [ 0.415989] iommu: Adding device c240000.i2c to group 4 [ 0.416285] iommu: Adding device 3180000.i2c to group 5 [ 0.416572] iommu: Adding device 3190000.i2c to group 6 [ 0.416988] iommu: Adding device 31b0000.i2c to group 7 [ 0.417282] iommu: Adding device 31c0000.i2c to group 8 [ 0.417570] iommu: Adding device c250000.i2c to group 9 [ 0.417859] iommu: Adding device 31e0000.i2c to group 10 [ 0.419256] iommu: Adding device 3210000.spi to group 11 [ 0.419544] iommu: Adding device c260000.spi to group 12 [ 0.420169] iommu: Adding device 3100000.serial to group 13 [ 0.420477] iommu: Adding device 3110000.serial to group 14 [ 0.420784] iommu: Adding device c280000.serial to group 15 [ 0.421071] iommu: Adding device 3130000.serial to group 16 [ 0.422235] iommu: Adding device 2490000.ether_qos to group 17 [ 0.422251] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.422855] iommu: Adding device b000000.rtcpu to group 18 [ 0.424664] iommu: Adding device 13e10000.host1x to group 19 [ 0.424943] iommu: Adding device 13e10000.host1x:ctx0 to group 20 [ 0.425210] iommu: Adding device 13e10000.host1x:ctx1 to group 21 [ 0.425482] iommu: Adding device 13e10000.host1x:ctx2 to group 22 [ 0.425763] iommu: Adding device 13e10000.host1x:ctx3 to group 23 [ 0.426040] iommu: Adding device 13e10000.host1x:ctx4 to group 24 [ 0.426309] iommu: Adding device 13e10000.host1x:ctx5 to group 25 [ 0.426599] iommu: Adding device 13e10000.host1x:ctx6 to group 26 [ 0.426870] iommu: Adding device 13e10000.host1x:ctx7 to group 27 [ 0.427280] iommu: Adding device 150c0000.nvcsi to group 28 [ 0.427842] iommu: Adding device 15700000.vi to group 29 [ 0.428168] iommu: Adding device 15600000.isp to group 30 [ 0.428620] iommu: Adding device 15210000.nvdisplay to group 31 [ 0.428867] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966a1400, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.428914] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966a78c0, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.428952] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966ac600, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.428990] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966b1500, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.429028] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966b6580, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.429064] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966ba9c0, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.429101] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966bef80, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.429137] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966c3b00, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.429174] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966c8d00, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.429210] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966cd200, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.432687] random: fast init done [ 0.432899] iommu: Adding device 15340000.vic to group 32 [ 0.433111] iommu: Adding device 154c0000.nvenc to group 33 [ 0.449168] iommu: Adding device 15480000.nvdec to group 34 [ 0.449629] iommu: Adding device 15380000.nvjpg to group 35 [ 0.449825] iommu: Adding device 15500000.tsec to group 36 [ 0.465859] iommu: Adding device 15100000.tsecb to group 37 [ 0.466598] iommu: Adding device 15810000.se to group 38 [ 0.482648] iommu: Adding device 15820000.se to group 39 [ 0.482976] iommu: Adding device 15830000.se to group 40 [ 0.483171] iommu: Adding device 15840000.se to group 41 [ 0.499944] iommu: Adding device smmu_test to group 42 [ 0.516507] mc: mapped MMIO address: 0xffffff800a6c0000 -> 0x2c10000 [ 0.516518] mc: mapped MMIO address: 0xffffff800a6e0000 -> 0x2c20000 [ 0.516531] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c30000 [ 0.516541] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c40000 [ 0.516550] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2c50000 [ 0.516557] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.516567] mc-err: mcerr ops are set to t18x [ 0.532556] mc-err: (255) csr_nvdisplayr: EMEM address decode error [ 0.532573] mc-err: status = 0x20327092; addr = 0x3ffffffc0 [ 0.532585] mc-err: secure: yes, access-type: read [ 0.532602] mc-err: unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 0.532623] mc-err: unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 0.532647] mc-err: unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 0.532668] mc-err: Too many MC errors; throttling prints [ 0.532702] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.549853] iommu: Adding device 3530000.xhci to group 43 [ 0.549864] arm-smmu: forcing sodev map for 3530000.xhci [ 0.566269] iommu: Adding device 3550000.xudc to group 44 [ 0.566280] arm-smmu: forcing sodev map for 3550000.xudc [ 0.582966] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.582973] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.599349] iommu: Adding device 17000000.gp10b to group 45 [ 0.616454] tegra-reset 5000000.clock: registered 193 resets. [ 0.666293] iommu: Adding device d000000.bpmp to group 46 [ 0.666509] bpmp: ping status is 0 [ 0.666608] bpmp d000000.bpmp: firmware tag is 4208eb5c85fe47a2235fbc0b8eb87dca [ 0.700397] bpmp d000000.bpmp: probe ok [ 0.703109] iommu: Adding device 2600000.dma to group 47 [ 0.704273] GPIO line 334 (e3325_sdio_rst) hogged as output/high [ 0.704302] GPIO line 332 (e3325_lane0_mux) hogged as output/low [ 0.704331] GPIO line 424 (wifi-enable) hogged as output/high [ 0.704362] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.704390] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.704424] GPIO line 461 (camera-control-output-low) hogged as output/low [ 0.704452] GPIO line 456 (camera-control-output-low) hogged as output/low [ 0.704915] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.708521] random: crng init done [ 0.712409] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.712726] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.715645] iommu: Adding device 10003000.pcie-controller to group 48 [ 0.715672] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.716223] iommu: Adding device sound to group 49 [ 0.716861] iommu: Adding device 3510000.hda to group 50 [ 0.838359] iommu: Adding device c1a0000.aon to group 51 [ 0.839153] vdd-ac-bat: 5000 mV [ 0.842673] vdd-1v8-ap: 1800 mV [ 0.933653] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.951132] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.951765] SCSI subsystem initialized [ 0.952132] libata version 3.00 loaded. [ 0.952611] usbcore: registered new interface driver usbfs [ 0.952702] usbcore: registered new interface driver hub [ 0.952838] usbcore: registered new device driver usb [ 1.216609] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 1.283324] vddio-ddr: at 1125 mV [ 1.301253] avdd_dsi_csi: 1200 mV [ 1.337267] vdd-1v8: 1800 mV [ 1.369256] vdd-3v3-sys: 3300 mV [ 1.400499] spmic-ldo0: at 1800 mV [ 1.417201] spmic-ldo1: at 800 mV [ 1.437252] vddio-3v3: 3300 mV [ 1.450843] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 1.469257] vdd-rtc: at 800 mV [ 1.484213] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 1.505267] spmic-ldo6: at 1500 mV [ 1.521255] vdd-pex-1v00: 1000 mV [ 1.534070] dvdd-pex: 1000 mV [ 1.583944] GPIO line 253 (spmic_gpio_input) hogged as input [ 1.584142] GPIO line 254 (spmic_gpio_input) hogged as input [ 1.584389] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 1.584602] max77620 4-003c: max77620 probe successful [ 1.585070] media: Linux media interface: v0.10 [ 1.585104] Linux video capture interface: v2.00 [ 1.617767] pps_core: LinuxPPS API ver. 1 registered [ 1.617775] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.617795] PTP clock support registered [ 1.618008] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 1.618362] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 1.618397] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 1.620555] trusty trusty: trusty version: Built: 21:16:26 Jun 25 2020 [ 1.620595] trusty trusty: selected api version: 3 (requested 3) [ 1.621591] Advanced Linux Sound Architecture Driver Initialized. [ 1.622022] Bluetooth: Core ver 2.22 [ 1.622053] NET: Registered protocol family 31 [ 1.622058] Bluetooth: HCI device and connection manager initialized [ 1.622069] Bluetooth: HCI socket layer initialized [ 1.622078] Bluetooth: L2CAP socket layer initialized [ 1.622100] Bluetooth: SCO socket layer initialized [ 1.623250] en-vdd-sd: 3300 mV [ 1.623561] en-vdd-cam: 1800 mV [ 1.623830] vdd-hdmi: 5000 mV [ 1.624149] vdd-usb0-5v: 5000 mV [ 1.624539] vdd-usb1-5v: 5000 mV [ 1.624886] en-vdd-ts-1v8: 1800 mV [ 1.625195] en-vdd-ts-hv-3v3: 3300 mV [ 1.625554] en-vdd-disp-3v3: 3300 mV [ 1.625919] en-mdm-pwr-3v7: 3700 mV [ 1.626224] en-vdd-disp-1v8: 1800 mV [ 1.626561] en-vdd-cam-hv-2v8: 2800 mV [ 1.626896] en-vdd-cam-1v2: 1200 mV [ 1.627224] vdd-fan: 5000 mV [ 1.627576] vdd-3v3: 3300 mV [ 1.628619] dis-vdd-1v2: 1200 mV [ 1.629077] en-vdd-vcm-2v8: 2800 mV [ 1.629536] vdd-usb2-5v: 5000 mV [ 1.629882] vdd-sys-bl: 3300 mV [ 1.630244] en-vdd-sys: 1200 mV [ 1.651329] camchar: rtcpu character device driver loaded [ 1.652143] gpio tegra-gpio wake53 for gpio=159(X:7) [ 1.700436] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 5.432614] __arm_smmu_context_fault: 221817 callbacks suppressed [ 5.432625] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x965fee00, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.432681] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96607a00, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.432728] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9660da40, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.432773] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96612b80, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.432816] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96618e80, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.432859] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9661e700, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.432902] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96623e40, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.432945] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96628f80, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.432988] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9662ea80, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.433030] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96633f80, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 8.958388] irq 65: nobody cared (try booting with the "irqpoll" option) [ 8.958405] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.140-tegra #1 [ 8.958407] Hardware name: quill (DT) [ 8.958410] Call trace: [ 8.958419] [] dump_backtrace+0x0/0x198 [ 8.958424] [] show_stack+0x24/0x30 [ 8.958430] [] dump_stack+0x98/0xc0 [ 8.958435] [] __report_bad_irq+0x3c/0xf8 [ 8.958439] [] note_interrupt+0x2c8/0x318 [ 8.958443] [] handle_irq_event_percpu+0x50/0x60 [ 8.958446] [] handle_irq_event+0x50/0x80 [ 8.958449] [] handle_fasteoi_irq+0xc8/0x1b8 [ 8.958453] [] generic_handle_irq+0x34/0x50 [ 8.958456] [] __handle_domain_irq+0x68/0xc0 [ 8.958460] [] gic_handle_irq+0x5c/0xb0 [ 8.958463] [] el1_irq+0xe8/0x194 [ 8.958467] [] irq_exit+0xd0/0x118 [ 8.958470] [] __handle_domain_irq+0x6c/0xc0 [ 8.958473] [] gic_handle_irq+0x5c/0xb0 [ 8.958476] [] el1_irq+0xe8/0x194 [ 8.958480] [] arch_cpu_idle+0x30/0x1b0 [ 8.958485] [] cpu_startup_entry+0x140/0x200 [ 8.958490] [] rest_init+0x84/0x90 [ 8.958495] [] start_kernel+0x370/0x384 [ 8.958499] [] __primary_switched+0x80/0x94 [ 8.958501] handlers: [ 8.958517] [] tegra_mcerr_hard_irq threaded [] tegra_mcerr_thread [ 8.958542] Disabling IRQ #65 [ 8.974413] clocksource: Switched to clocksource arch_sys_counter [ 9.014449] VFS: Disk quotas dquot_6.6.0 [ 9.014671] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 9.024633] tegra-pcie 10003000.pcie-controller: wrong configuration updated in DT, switching to default 2x1, 1x1, 1x1 configuration [ 9.025461] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 9.026106] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 9.026115] nvmap_page_pool_init: Total RAM pages: 2006769 [ 9.026122] nvmap_page_pool_init: nvmap page pool size: 250846 pages (979 MB) [ 9.026304] nvmap_background_zero_thread: PP zeroing thread starting. [ 9.044951] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 9.053701] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 9.053876] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 9.054228] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 9.054320] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 9.054501] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 9.054640] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 9.054805] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 9.055050] la/ptsa driver initialized. [ 9.055063] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 9.055068] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 9.056223] NET: Registered protocol family 2 [ 9.058214] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 9.058415] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 9.058908] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 9.059748] TCP: Hash tables configured (established 65536 bind 65536) [ 9.059805] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 9.059930] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 9.060755] NET: Registered protocol family 1 [ 9.061795] RPC: Registered named UNIX socket transport module. [ 9.061801] RPC: Registered udp transport module. [ 9.061806] RPC: Registered tcp transport module. [ 9.061810] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.061932] PCI: CLS 0 bytes, default 64 [ 9.062200] Trying to unpack rootfs image as initramfs... [ 9.108195] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 9.253545] Freeing initrd memory: 5432K [ 9.313225] host1x 13e10000.host1x: initialized [ 9.314747] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 9.319487] audit: initializing netlink subsys (disabled) [ 9.319525] audit: type=2000 audit(9.208:1): initialized [ 9.320205] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 9.331775] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 9.334340] ntfs: driver 2.1.32 [Flags: R/W]. [ 9.335920] 9p: Installing v9fs 9p2000 file system support [ 9.342337] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 9.342676] io scheduler noop registered [ 9.343284] io scheduler cfq registered (default) [ 9.392208] gic 2a41000.agic-controller: GIC IRQ controller registered [ 10.442707] __arm_smmu_context_fault: 220066 callbacks suppressed [ 10.442718] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9607a000, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.442779] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9608b480, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.443379] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96096e00, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.443424] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9609c900, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.443469] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960a2540, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.443513] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960a7d80, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.443558] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960ad740, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.443602] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960b3100, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.443647] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960b8d00, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.443691] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960be280, fsynr=0x20001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 11.213313] iommu: Adding device aconnect@2a41000:adsp_audio to group 52 [ 11.217306] iommu: Adding device 2993000.adsp to group 53 [ 11.217421] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 11.228812] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 11.278422] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 11.310719] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 11.343968] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 11.377130] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 11.395186] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 11.395360] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 11.395369] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=1500000, max_bw=4687500 [ 11.427191] tsec 15500000.tsec: initialized [ 11.444463] tsec 15100000.tsecb: initialized [ 11.477585] nvdec 15480000.nvdec: initialized [ 11.543675] falcon 15340000.vic: initialized [ 11.561173] falcon 154c0000.nvenc: initialized [ 11.594156] falcon 15380000.nvjpg: initialized [ 11.597918] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 11.599771] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 11.601408] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 11.602996] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 11.604620] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 11.606205] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 11.607773] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 11.609256] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 11.612654] tegradccommon 15200000.dc_common: host1x channel mapped [ 11.612669] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 11.612714] tegradccommon 15200000.dc_common: dma mapping done [ 11.613835] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 11.613876] generic_infoframe_type: 0x87 [ 11.613957] tegradc 15210000.nvdisplay: DT parsed successfully [ 11.614016] tegradc 15210000.nvdisplay: Display dc.ffffff800b650000 registered with id=0 [ 11.614757] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=389 [ 11.627071] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 11.711288] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 11.711296] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 11.711301] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 11.727163] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 11.727222] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 11.727348] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 11.727360] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 11.727500] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 11.727508] tegra_cec 3960000.tegra_cec: probed [ 11.728598] of_fixed_clk: probe of can_clock failed with error -17 [ 11.778968] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 11.778977] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 11.884310] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 11.894701] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 11.894739] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 11.927441] kfuse 3830000.kfuse: initialized [ 11.929177] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 11.932644] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 11.962841] tegradc 15210000.nvdisplay: probed [ 11.963835] Console: switching to colour frame buffer device 240x67 [ 11.964012] tegradc 15210000.nvdisplay: fb registered [ 11.964316] gpio tegra-gpio wake21 for gpio=121(P:1) [ 11.978089] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 11.978250] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 11.994102] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 11.994890] console [ttyS0] disabled [ 11.994939] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 35, base_baud = 25500000) is a Tegra [ 12.013985] Parent Clock set for DC plld2 [ 12.077654] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 12.094656] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 12.094667] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 12.211304] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 12.211308] Extcon AUX1(HDMI) enable [ 12.477419] console [ttyS0] enabled [ 12.477525] tegradc 15210000.nvdisplay: blank - powerdown [ 12.510852] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 36, base_baud = 0) is a TEGRA_UART [ 12.511231] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 12.511235] Extcon AUX1(HDMI) disable [ 12.512134] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 12.512450] serial-tegra 3130000.serial: RX in PIO mode [ 12.513432] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 12.514678] [drm] Initialized [ 12.539611] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 12.540381] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 12.545840] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 12.655148] brd: module loaded [ 12.683821] loop: module loaded [ 12.684546] tegra_profiler: version: 1.141, samples/io: 48/28 [ 12.685582] tegra_profiler: auth: init [ 12.691929] nct1008_nct72 7-004c: starting parse dt [ 12.692796] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 12.692819] nct1008_nct72 7-004c: success parsing dt [ 12.694113] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 12.697420] THERMAL EST: found 3 subdevs [ 12.697450] THERMAL EST num_resources: 0 [ 12.697478] [THERMAL EST subdev 0] [ 12.697501] [THERMAL EST subdev 1] [ 12.697520] [THERMAL EST subdev 2] [ 12.699616] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 12.699624] THERMAL EST: thz register success. [ 12.700760] THERMAL EST: end of probe, return err: 0 [ 12.706899] sd: No Scsi addr parsed to reserve index [ 12.707049] hisi_sas: driver version v1.6 [ 12.728179] tegradc 15210000.nvdisplay: unblank [ 12.728694] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 12.729029] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 12.729060] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 12.729823] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 12.732731] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 12.733534] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 12.734141] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 12.734795] scsi host0: tegra_ahci [ 12.736860] scsi host1: tegra_ahci [ 12.737381] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 12.737392] ata2: DUMMY [ 12.747307] Parent Clock set for DC plld2 [ 12.750467] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 12.750473] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 12.751771] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 12.752608] libphy: Fixed MDIO Bus: probed [ 12.753270] tun: Universal TUN/TAP device driver, 1.6 [ 12.753274] tun: (C) 1999-2004 Max Krasnyansky [ 12.753672] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 12.753709] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 12.754194] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 12.754197] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 12.754243] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 12.754246] igb: Copyright (c) 2007-2014 Intel Corporation. [ 12.754284] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 12.754287] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 12.754325] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 12.754328] Copyright(c) 1999 - 2017 Intel Corporation. [ 12.762608] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 12.762615] nct1008_nct72 7-004c: initial LOC temp: 39000 [ 12.762964] nct1008_nct72 7-004c: initial EXT temp: 53000 [ 12.763638] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 12.766198] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b c6 8a 1c [ 12.766421] libphy: dwc_phy: probed [ 12.766924] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 12.768055] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 12.768272] nct1008_nct72 7-004c: nct1008_probe: initialized [ 12.769918] PPP generic driver version 2.4.2 [ 12.770167] PPP BSD Compression module registered [ 12.770175] PPP Deflate Compression module registered [ 12.770221] PPP MPPE Compression module registered [ 12.770226] NET: Registered protocol family 24 [ 12.770320] usbcore: registered new interface driver r8152 [ 12.770450] usbcore: registered new interface driver asix [ 12.770542] usbcore: registered new interface driver ax88179_178a [ 12.770625] usbcore: registered new interface driver cdc_ether [ 12.770708] usbcore: registered new interface driver net1080 [ 12.770793] usbcore: registered new interface driver cdc_subset [ 12.770872] usbcore: registered new interface driver zaurus [ 12.770967] usbcore: registered new interface driver cdc_ncm [ 12.771207] VFIO - User Level meta-driver version: 0.3 [ 12.774848] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 12.774868] ehci-pci: EHCI PCI platform driver [ 12.774906] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 12.774914] ohci-pci: OHCI PCI platform driver [ 12.774953] ohci-platform: OHCI generic platform driver [ 12.779494] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 12.782065] tegra-xusb 3530000.xhci: extcon 0: ffffffc1eac32400 id [ 12.782878] usbcore: registered new interface driver uas [ 12.782919] usbcore: registered new interface driver usb-storage [ 12.782993] usbcore: registered new interface driver usbserial [ 12.784575] tegra-xusb 3530000.xhci: Firmware timestamp: 2019-10-31 05:52:15 UTC, Version: 55.17 release [ 12.786717] tegra-xudc-new 3550000.xudc: device count: 1 [ 12.787921] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 12.787945] tegra-xudc-new 3550000.xudc: entering ELPG [ 12.788714] tegra-xudc-new 3550000.xudc: entering ELPG done [ 12.790036] mousedev: PS/2 mouse device common for all mice [ 12.790118] usbcore: registered new interface driver xpad [ 12.790630] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 12.790635] Extcon AUX1(HDMI) enable [ 12.810467] tegra-xusb 3530000.xhci: xHCI Host Controller [ 12.810492] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 12.811219] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 12.811262] tegra-xusb 3530000.xhci: irq 69, io mem 0x03530000 [ 12.811515] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 12.811523] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.811528] usb usb1: Product: xHCI Host Controller [ 12.811532] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 12.811537] usb usb1: SerialNumber: 3530000.xhci [ 12.812070] hub 1-0:1.0: USB hub found [ 12.812112] hub 1-0:1.0: 4 ports detected [ 12.812517] tegra-xusb 3530000.xhci: xHCI Host Controller [ 12.812527] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 12.812725] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 12.812731] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.812736] usb usb2: Product: xHCI Host Controller [ 12.812740] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 12.812744] usb usb2: SerialNumber: 3530000.xhci [ 12.813189] hub 2-0:1.0: USB hub found [ 12.813239] hub 2-0:1.0: 3 ports detected [ 12.920655] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 12.922041] Wake73 for irq=42 [ 12.923346] rtc rtc1: alarm rtc device [ 12.923363] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 12.923425] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 12.923605] i2c /dev entries driver [ 12.925240] pca9570 2-0024: pca9570_icr_move, forward val=5 [ 13.027718] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.027764] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.027859] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.027919] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 13.052991] ata1: SATA link down (SStatus 0 SControl 300) [ 13.138049] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.138085] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.138199] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.138233] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 13.138443] usb 1-2: new low-speed USB device number 2 using tegra-xusb [ 13.166814] usb 1-2: New USB device found, idVendor=413c, idProduct=2113 [ 13.166823] usb 1-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 13.166828] usb 1-2: Product: Dell KB216 Wired Keyboard [ 13.248378] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.248416] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.248530] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.248570] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 13.286428] usb 1-3: new low-speed USB device number 3 using tegra-xusb [ 13.311910] usb 1-3: New USB device found, idVendor=413c, idProduct=301a [ 13.311920] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 13.311925] usb 1-3: Product: Dell MS116 USB Optical Mouse [ 13.311929] usb 1-3: Manufacturer: PixArt [ 13.358703] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.358741] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.358828] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.358861] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 13.469003] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.469038] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.469150] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.469184] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 13.579314] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.579348] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.579458] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.579491] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 13.689612] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.689646] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.689754] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.689788] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 13.799916] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.799950] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.800058] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.800091] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 13.910224] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.910259] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 13.910373] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 13.910437] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 14.020567] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 14.020602] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 14.020727] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 14.020767] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 14.020771] pca9570 2-0024: pca9570_icr_move:i2c write failed [ 14.020896] pca9570: probe of 2-0024 failed with error -121 [ 14.021622] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 14.027118] parse_throttle_dt_data: Num cap clks = 4 [ 14.027123] parse_throttle_dt_data: clk=mcpu type=1 [ 14.027128] parse_throttle_dt_data: clk=bcpu type=2 [ 14.027136] parse_throttle_dt_data: clk=gpu type=4 [ 14.027140] parse_throttle_dt_data: clk=emc type=3 [ 14.028262] tegra_throttle_probe: probe successful. #cdevs=4 [ 14.028865] FAN dev name: pwm-fan [ 14.028922] FAN:gpio request success. [ 14.028930] FAN: can't find tach_gpio [ 14.028956] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 14.029132] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 14.029137] pwm_fan_driver pwm-fan: tach period: 1000 [ 14.029843] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 14.029849] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 14.029854] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 14.029858] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 14.029863] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 14.029867] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 14.029871] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 14.029875] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 14.029880] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 14.029885] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 14.031626] device-mapper: uevent: version 1.0.3 [ 14.032548] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 14.032860] CPU EMC frequency mapping table: default setting [ 14.037217] cpufreq: platform driver Initialization: pass [ 14.037866] cpuidle: Initializing cpuidle driver init for Denver cluster [ 14.037977] cpuidle: Initializing cpuidle driver init for A57 cluster [ 14.038750] sdhci: Secure Digital Host Controller Interface driver [ 14.038752] sdhci: Copyright(c) Pierre Ossman [ 14.038754] sdhci-pltfm: SDHCI platform and OF driver helper [ 14.040182] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 14.042083] CMDQ: cmdq_platfm_init successful [ 14.043267] CQE: CMD_TIMING bit set for R1B DCMD [ 14.045558] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 14.051024] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 14.051075] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 14.052950] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 14.054811] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 256 [ 14.060026] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 14.061036] tegra-se-nvhost 15810000.se: initialized [ 14.062144] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 14.063051] tegra-se-nvhost 15820000.se: initialized [ 14.064053] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 14.064823] tegra-se-nvhost 15830000.se: initialized [ 14.065722] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 14.066438] tegra-se-nvhost 15840000.se: initialized [ 14.067733] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 14.067975] hidraw: raw HID events driver (C) Jiri Kosina [ 14.073099] input: Dell KB216 Wired Keyboard as /devices/3530000.xhci/usb1/1-2/1-2:1.0/0003:413C:2113.0001/input/input0 [ 14.086440] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 14.090526] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 14.102570] gpio tegra-gpio wake71 for gpio=125(P:5) [ 14.102622] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 14.131046] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-3530000.xhci-2/input0 [ 14.132016] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 14.137663] input: Dell KB216 Wired Keyboard as /devices/3530000.xhci/usb1/1-2/1-2:1.1/0003:413C:2113.0002/input/input1 [ 14.145588] mmc0: periodic cache flush enabled [ 14.145601] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 14.146134] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 14.150469] mmcblk0boot0: mmc0:0001 032G34 partition 1 4.00 MiB [ 14.150680] mmcblk0boot1: mmc0:0001 032G34 partition 2 4.00 MiB [ 14.150877] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 14.154165] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 14.194703] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-3530000.xhci-2/input1 [ 14.197393] input: PixArt Dell MS116 USB Optical Mouse as /devices/3530000.xhci/usb1/1-3/1-3:1.0/0003:413C:301A.0003/input/input2 [ 14.197832] hid-generic 0003:413C:301A.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-3530000.xhci-3/input0 [ 14.197905] usbcore: registered new interface driver usbhid [ 14.197907] usbhid: USB HID core driver [ 14.200232] tegra-i2c 3160000.i2c: no acknowledge from address 0x42 [ 14.200285] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 14.200406] ina3221x: probe of 0-0042 failed with error -121 [ 14.200655] tegra-i2c 3160000.i2c: no acknowledge from address 0x43 [ 14.200682] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 14.200759] ina3221x: probe of 0-0043 failed with error -121 [ 14.203508] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 14.210623] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 14.210975] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 14.211322] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 14.211706] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 14.214194] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 14.214276] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 14.214330] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 14.214466] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 14.214777] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 14.215259] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (50) [ 14.215263] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 14.236362] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 14.238244] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 14.238916] tegra186-aondbg aondbg: aondbg driver probe() OK [ 14.239267] register_ari_mca_banks: Registered MCA ROC:IOB [ 14.239341] register_ari_mca_banks: Registered MCA ROC:CCE [ 14.239633] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 14.239636] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 14.239640] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 14.239693] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 14.239696] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 14.239699] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 14.239750] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 14.239753] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 14.239756] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 14.239815] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 14.239818] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 14.239821] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 14.239873] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 14.239876] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 14.239879] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 14.239936] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 14.239942] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 14.239944] tegra18-bridge 2100000.axip2p: bridge probed OK [ 14.239997] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 14.240002] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 14.240005] tegra18-bridge 2110000.axip2p: bridge probed OK [ 14.240055] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 14.240060] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 14.240062] tegra18-bridge 2120000.axip2p: bridge probed OK [ 14.240112] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 14.240118] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 14.240120] tegra18-bridge 2130000.axip2p: bridge probed OK [ 14.240170] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 14.240174] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 14.240176] tegra18-bridge 2140000.axip2p: bridge probed OK [ 14.240239] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 14.240245] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 14.240248] tegra18-bridge 2150000.axip2p: bridge probed OK [ 14.240327] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 14.240333] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 14.240336] tegra18-bridge 2160000.axip2p: bridge probed OK [ 14.240388] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 14.240394] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 14.240396] tegra18-bridge 2170000.axip2p: bridge probed OK [ 14.240450] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 14.240456] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 14.240458] tegra18-bridge 2180000.axip2p: bridge probed OK [ 14.240507] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 14.240513] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 14.240515] tegra18-bridge 2190000.axip2p: bridge probed OK [ 14.240616] tegra18_a57_serr_init: on CPU 1 a Denver Core [ 14.240674] tegra18x_actmon d230000.actmon: in actmon_register()... [ 14.241227] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 14.241760] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 14.241908] denver_knobs_init:MTS_VERSION:47926945 [ 14.244859] nvpmodel: initialized successfully [ 14.245969] trusty-virtio trusty:virtio: initializing [ 14.246224] trusty_ipc virtio0: vring0: va(pa) ffffffc1e6bba000(0) qsz 32 notifyid 1 [ 14.246234] trusty_ipc virtio0: vring1: va(pa) ffffffc1e6bbc000(0) qsz 32 notifyid 2 [ 14.246356] trusty-virtio trusty:virtio: initializing done [ 14.246491] trusty_ipc virtio0: is online [ 14.247945] usbcore: registered new interface driver snd-usb-audio [ 14.265427] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input3 [ 14.265628] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input4 [ 14.291336] OPE platform probe [ 14.291404] OPE platform probe successful [ 14.337032] mmc1: hw tuning done ... [ 14.343080] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 14.343599] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 14.343671] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 14.343739] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 14.343811] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 14.343884] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 14.343951] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 14.344017] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 14.344085] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 14.344151] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 14.344216] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 14.344283] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 14.344347] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 14.344411] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 14.344481] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 14.344546] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 14.344612] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 14.344680] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 14.344744] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 14.344816] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 14.344882] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 14.368013] u32 classifier [ 14.368017] Actions configured [ 14.368101] Initializing XFRM netlink socket [ 14.369758] NET: Registered protocol family 10 [ 14.371206] NET: Registered protocol family 17 [ 14.371219] NET: Registered protocol family 15 [ 14.371427] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 14.371512] Bluetooth: RFCOMM socket layer initialized [ 14.371528] Bluetooth: RFCOMM ver 1.11 [ 14.371533] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 14.371538] Bluetooth: HIDP socket layer initialized [ 14.371558] 9pnet: Installing 9P2000 support [ 14.371602] Key type dns_resolver registered [ 14.371972] Registered cp15_barrier emulation handler [ 14.371988] Registered setend emulation handler [ 14.373447] registered taskstats version 1 [ 14.376720] isp 15600000.isp: initialized [ 14.380899] nvcsi 150c0000.nvcsi: initialized [ 14.381822] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 14.385732] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 14.385837] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 14.385928] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 14.386098] input: gpio-keys as /devices/gpio-keys/input/input5 [ 14.387363] tegra-vi4 15700000.vi: initialized [ 14.388366] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 14.419130] tegra_rtc c2a0000.rtc: setting system clock to 2020-08-28 13:50:48 UTC (1598622648) [ 14.420020] mmcblk mmc0:0001: Card claimed for testing. [ 14.456309] bpmp: mounted debugfs mirror [ 14.457815] bwmgr: missing cdev-type property [ 14.463107] spmic-ldo0: disabling [ 14.463359] spmic-ldo1: disabling [ 14.463524] en-vdd-sd: disabling [ 14.463527] vdd-usb0-5v: disabling [ 14.463530] vdd-usb1-5v: disabling [ 14.463535] vdd-3v3: disabling [ 14.463538] en-vdd-vcm-2v8: disabling [ 14.463559] vdd-sys-bl: disabling [ 14.463563] ALSA device list: [ 14.463566] #0: tegra-hda at 0x3518000 irq 382 [ 14.463568] #1: tegra-snd-t186ref-mobile-rt565x [ 14.967222] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 14.967242] Extcon HDMI: HPD enabled [ 14.967260] tegradc 15210000.nvdisplay: hdmi: plugged [ 14.969703] Freeing unused kernel memory: 8576K [ 15.008443] Root device found: mmcblk0p1 [ 15.010225] Found dev node: /dev/mmcblk0p1 [ 15.091422] EXT4-fs (mmcblk0p1): 9 orphan inodes deleted [ 15.091428] EXT4-fs (mmcblk0p1): recovery complete [ 15.096228] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 15.097436] Rootfs mounted over mmcblk0p1 [ 15.119473] Switching from initrd to actual rootfs [ 15.295948] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.340710] cgroup: cgroup2: unknown option "nsdelegate" [ 15.364462] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 15.367628] systemd[1]: Detected architecture arm64. [ 15.458834] systemd[1]: Set hostname to . [ 15.579072] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 15.579097] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 15.779954] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 15.780197] systemd[1]: Reached target User and Group Name Lookups. [ 15.780252] systemd[1]: Reached target Swap. [ 15.780589] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 15.784060] systemd[1]: Created slice System Slice. [ 15.821430] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 15.842611] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 15.934781] Wake76 for irq=199 [ 15.934787] Wake77 for irq=199 [ 15.934789] Wake78 for irq=199 [ 15.934791] Wake79 for irq=199 [ 15.934793] Wake80 for irq=199 [ 15.934796] Wake81 for irq=199 [ 15.934798] Wake82 for irq=199 [ 15.934831] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 15.934837] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 16.039353] usb usb2: usb_suspend_both: status 0 [ 16.244628] systemd-journald[2313]: Received request to flush runtime journal from PID 1 [ 16.725787] imx274 2-001a: probing v4l2 sensor. [ 16.727392] imx274 2-001a: tegracam sensor driver:imx274_v2.0.6 [ 16.727434] tegra-vi4 15700000.vi: subdev imx274 2-001a bound [ 16.728070] imx274 2-001a: Detected IMX274 sensor [ 17.011149] dhd_module_init in [ 17.011225] found wifi platform device bcmdhd_wlan [ 17.013002] wifi_platform_get_country_code_map: could not get country_code_map [ 17.013007] wifi_plat_dev_drv_probe:platform country code map is not available [ 17.013021] Power-up adapter 'DHD generic adapter' [ 17.013027] wifi_platform_set_power = 1 [ 17.197127] using random self ethernet address [ 17.208772] using random host ethernet address [ 17.219350] wifi_platform_bus_enumerate device present 1 [ 17.240327] wifi_platform_bus_enumerate device present 0 [ 17.255721] F1 signature read @0x18000000=0x17214354 [ 17.365068] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 17.369035] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 17.369165] wifi_platform_get_mac_addr [ 17.446472] ids dhd_log_netlink_init [ 17.455556] wl_create_event_handler(): thread:wl_event_handler:1371 started [ 17.455565] wl_event_handler : [ 17.455569] tsk Enter, tsk = 0xffffffc1dd181a90 [ 17.460807] dhd_attach(): thread:dhd_watchdog_thread:1379 started [ 17.465026] dhd_attach(): thread:dhd_dpc:137b started [ 17.465660] dhd_attach(): thread:dhd_rxf:137c started [ 17.465680] dhd_deferred_work_init: work queue initialized [ 17.522715] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 17.523413] Register interface [wlan0] MAC: 00:04:4b:c6:8a:1a [ 17.523425] dhd_prot_ioctl : bus is down. we have nothing to do [ 17.524160] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 60 [ 17.531277] wifi_platform_set_power = 0 [ 17.741266] Mass Storage Function, version: 2009/09/11 [ 17.741274] LUN: removable file: (no medium) [ 17.795687] using random self ethernet address [ 17.813643] using random host ethernet address [ 17.856268] rndis0: HOST MAC 7e:d0:e9:b7:ee:94 [ 17.856451] rndis0: MAC 7e:d0:e9:b7:ee:95 [ 17.859136] usb0: HOST MAC 7e:d0:e9:b7:ee:96 [ 17.859317] usb0: MAC 7e:d0:e9:b7:ee:97 [ 17.859337] tegra-xudc-new 3550000.xudc: exiting ELPG [ 17.862141] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 17.862160] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 17.862188] tegra-xudc-new 3550000.xudc: entering ELPG [ 17.863043] tegra-xudc-new 3550000.xudc: entering ELPG done [ 17.863181] tegra-xudc-new 3550000.xudc: exiting ELPG [ 17.865976] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 17.866001] tegra-xudc-new 3550000.xudc: entering ELPG [ 17.866812] tegra-xudc-new 3550000.xudc: entering ELPG done [ 17.875710] l4tbr0: port 1(rndis0) entered blocking state [ 17.875715] l4tbr0: port 1(rndis0) entered disabled state [ 17.875861] device rndis0 entered promiscuous mode [ 17.883936] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 17.889026] l4tbr0: port 2(usb0) entered blocking state [ 17.889032] l4tbr0: port 2(usb0) entered disabled state [ 17.889576] device usb0 entered promiscuous mode [ 17.918613] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 18.387072] CPU1: shutdown [ 18.406566] psci: Retrying again to check for CPU kill [ 18.406571] psci: CPU1 killed. [ 18.426003] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.460773] CPU2: shutdown [ 18.482436] psci: Retrying again to check for CPU kill [ 18.482442] psci: CPU2 killed. [ 18.503489] gpio tegra-gpio wake18 for gpio=101(M:5) [ 18.510295] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.576813] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 18.576935] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 18.576943] wl_android_wifi_on in [ 18.576946] wifi_platform_set_power = 1 [ 18.790682] vdd-1v8: voltage operation not allowed [ 18.790693] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.810609] vdd-1v8: voltage operation not allowed [ 18.810619] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.831370] vdd-1v8: voltage operation not allowed [ 18.831380] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.833765] vdd-1v8: voltage operation not allowed [ 18.833772] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.935178] vdd-1v8: voltage operation not allowed [ 18.935189] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.936061] vdd-1v8: voltage operation not allowed [ 18.936068] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.937554] vdd-1v8: voltage operation not allowed [ 18.937559] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.937582] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 60 [ 18.938133] F1 signature read @0x18000000=0x17214354 [ 18.942724] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 18.943365] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 19.012477] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 19.076941] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 19.077209] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 19.077266] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 19.077267] Enabling wake69 [ 19.078478] wifi_platform_get_mac_addr [ 19.080119] Firmware up: op_mode=0x0005, MAC=00:04:4b:c6:8a:1a [ 19.084320] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ 19.084354] Skipping the clm download. len:0 memblk: (null) [ 19.086567] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 19.091484] Firmware version = wl0: Nov 6 2019 21:22:23 version 7.35.349.85 (r723239 CY) FWID 01-a59d25b5 [ 19.093799] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 19.250894] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : [ 19.250894] P2P interface registered [ 19.259741] WLC_E_IF: NO_IF set, event Ignored [ 19.268920] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.292337] zram: Added device: zram0 [ 20.293895] zram: Added device: zram1 [ 20.294677] zram: Added device: zram2 [ 20.295024] zram: Added device: zram3 [ 20.317393] zram0: detected capacity change from 0 to 1029259264 [ 20.340964] Adding 1005132k swap on /dev/zram0. Priority:5 extents:1 across:1005132k SS [ 20.344568] zram1: detected capacity change from 0 to 1029259264 [ 20.354720] Adding 1005132k swap on /dev/zram1. Priority:5 extents:1 across:1005132k SS [ 20.358159] zram2: detected capacity change from 0 to 1029259264 [ 20.379378] Adding 1005132k swap on /dev/zram2. Priority:5 extents:1 across:1005132k SS [ 20.384681] zram3: detected capacity change from 0 to 1029259264 [ 20.399014] Adding 1005132k swap on /dev/zram3. Priority:5 extents:1 across:1005132k SS [ 21.579908] tegradc 15210000.nvdisplay: blank - powerdown [ 21.637402] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 21.637404] Extcon AUX1(HDMI) disable [ 21.646685] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 21.647733] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.660396] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 21.660476] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 21.660928] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 21.661040] tegradc 15210000.nvdisplay: unblank [ 21.661599] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 21.661678] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 21.661754] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 21.663216] Parent Clock set for DC plld2 [ 21.667514] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 21.668772] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 21.668780] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 21.707814] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 21.707816] Extcon AUX1(HDMI) enable [ 21.707869] tegradc 15210000.nvdisplay: unblank [ 24.356527] fuse init (API version 7.26) [ 24.481442] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.481454] Bluetooth: BNEP socket layer initialized [ 25.167811] tegradc 15210000.nvdisplay: unblank n@n-desktop:~$ n@n-desktop:~$ n@n-desktop:~$ cat /boot/extlinux/extlinux.conf TIMEOUT 30 DEFAULT primary MENU TITLE L4T boot options LABEL primary MENU LABEL primary kernel LINUX /boot/Image FDT /boot/tegra186-tx2-cti-ASG016-IMX274.dtb INITRD /boot/initrd APPEND ${cbootargs} quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 # When testing a custom kernel, it is recommended that you create a backup of # the original kernel and add a new entry to this file so that the device can # fallback to the original kernel. To do this: # # 1, Make a backup of the original kernel # sudo cp /boot/Image /boot/Image.backup # # 2, Copy your custom kernel into /boot/Image # # 3, Uncomment below menu setting lines for the original kernel # # 4, Reboot # LABEL backup # MENU LABEL backup kernel # LINUX /boot/Image.backup # INITRD /boot/initrd # APPEND ${cbootargs} n@n-desktop:~$ n@n-desktop:~$ n@n-desktop:~$ n@n-desktop:~$ ls Desktop examples.desktop Pictures Templates Documents Music Public updated_dtb_in_extlinux.txt Downloads no_extlinux_modififcation.txt sig Videos n@n-desktop:~$ ls Desktop examples.desktop Pictures Templates Documents Music Public updated_dtb_in_extlinux.txt Downloads no_extlinux_modififcation.txt sig Videos n@n-desktop:~$ dmesg | grep display [ 0.428620] iommu: Adding device 15210000.nvdisplay to group 31 [ 0.532556] mc-err: (255) csr_nvdisplayr: EMEM address decode error [ 11.613835] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 11.613957] tegradc 15210000.nvdisplay: DT parsed successfully [ 11.614016] tegradc 15210000.nvdisplay: Display dc.ffffff800b650000 registered with id=0 [ 11.727348] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 11.727360] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 11.778968] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 11.778977] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 11.962841] tegradc 15210000.nvdisplay: probed [ 11.964012] tegradc 15210000.nvdisplay: fb registered [ 12.077654] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 12.094656] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 12.094667] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 12.477525] tegradc 15210000.nvdisplay: blank - powerdown [ 12.728179] tegradc 15210000.nvdisplay: unblank [ 12.751771] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 12.753672] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 12.753709] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 14.967260] tegradc 15210000.nvdisplay: hdmi: plugged [ 21.579908] tegradc 15210000.nvdisplay: blank - powerdown [ 21.661040] tegradc 15210000.nvdisplay: unblank [ 21.667514] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 21.668772] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 21.668780] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 21.707869] tegradc 15210000.nvdisplay: unblank [ 25.167811] tegradc 15210000.nvdisplay: unblank n@n-desktop:~$ lspci n@n-desktop:~$