[BEGIN] 2022-12-06 오후 2:57:37 [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x0, rst_level: 0x0 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.108] I> Temperature = 37000 [0000.111] W> Skipping boost for clk: BPMP_CPU_NIC [0000.115] W> Skipping boost for clk: BPMP_APB [0000.119] W> Skipping boost for clk: AXI_CBB [0000.123] W> Skipping boost for clk: AON_CPU_NIC [0000.127] W> Skipping boost for clk: CAN1 [0000.131] W> Skipping boost for clk: CAN2 [0000.135] I> Boot-device: QSPI (instance: 0) [0000.139] I> Qspi flash params source = mb1bct [0000.143] I> Qspi clock source : pllc_out0 [0000.147] I> Qspi-0 reinitialized [0000.150] I> Qspi flash params source = mb1bct [0000.163] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.170] W> Thermal config not found in BCT [0000.178] W> MEMIO rail config not found in BCT [0000.188] I> Qspi flash params source = mb1bct [0000.201] I> Qspi flash params source = mb1bct [0000.235] I> Qspi flash params source = mb1bct [0000.799] I> Qspi flash params source = mb1bct [0000.816] I> Qspi flash params source = mb1bct [0000.855] W> Platform config not found in BCT [0000.882] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done y젩n enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init y ?000.917] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.918] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.920] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.928] I> gpio framework initialized [0000.932] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.939] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.947] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.956] I> qspi flash-0 params source = boot args [0000.961] I> QSPI-0l initialized successfully [0000.965] I> sdmmc-3 params source = safe params [0001.362] I> sdmmc DDR50 mode [0001.380] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.397] W> Cannot find any partition table for 00000003 [0001.398] > PARTITION_MANAGER: Failed to publish partition. [0001.413] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.414] I> Active Boot chain : 0 [0002.085] I> Relocating BR-BCT [0002.087] > DEVICE_PROD: device prod is not initialized. [0002.113] E> I2C: slave not found in slaves. [0002.114] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0002.115] E> I2C_DEV: Failed to send register address 0x00000000. [0002.116] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0. [0002.117] E> eeprom: Failed to read I2C slave device [0002.119] I> Failed to read CVB eeprom data @ AE [0002.124] I> Retrying CVB eeprom read @ AC ... [0002.129] E> I2C: slave not found in slaves. [0002.133] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0002.140] E> I2C_DEV: Failed to send register address 0x00000000. [0002.146] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0002.155] E> eeprom: Failed to read I2C slave device [0002.160] I> Failed to read CVB eeprom data @ AC [0002.421] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.422] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.423] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.423] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.424] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.424] I> dram_block larger than 80000000 [0002.426] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.438] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.441] I> found decompressor handler: lz4 [0002.669] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.670] I> Setting EKB blob info to OPTEE dtb finished. y?TICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: y ?mp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 y??k_early initialized y?C: y?il_early initialized y?y?se initialized hwwdt initialized y?sey?94_ec_get_ec_list: found 45 ecs y?re externy? initialized vmon_setup_monitors: found 3 monitors vmon initialized y? y?c initialized yㅿ?on_populate_monitors: found 73 monitors y?found y?on initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized y?TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auy?k_dt_late initialized y??c_late initialized pm_post initialized dbells initialized y?1y?ce initialized y??c initialized y?:23:20 UTCy?fs_clk_mach_post initialized y?022y?fs_clk_platform_post initialized y?y?c_late initialized regulator_post initialized y?ch6y? initialized console_late initialized clk_dt_post initialized mc_reg initialized y I/TC: WARNINy?_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] yㅺ This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot y ?003.289] I> Welcome to NVDisp-Init [0003.289] I> NVDisp-Init version: t194-f9ecfedc [0003.290] I> CPU-BL Params @ 0xca020000 [0003.290] I> 0) Base:0x00000000 Size:0x00000000 [0003.290] I> 1) Base:0xc8300000 Size:0x00100000 [0003.291] I> 2) Base:0xc9800000 Size:0x00200000 [0003.291] I> 3) Base:0xc8600000 Size:0x00200000 [0003.293] I> 4) Base:0xc8200000 Size:0x00100000 [0003.298] I> 5) Base:0xc8100000 Size:0x00100000 [0003.302] I> 6) Base:0xc9400000 Size:0x00400000 [0003.307] I> 7) Base:0xc9000000 Size:0x00400000 [0003.311] I> 8) Base:0xc8000000 Size:0x00100000 [0003.316] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.320] I> 10) Base:0xca800000 Size:0x00800000 [0003.325] I> 11) Base:0x40000000 Size:0x00040000 [0003.329] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.334] I> 13) Base:0x40046000 Size:0x00002000 [0003.338] I> 14) Base:0x40048000 Size:0x00002000 [0003.342] I> 15) Base:0xaf000000 Size:0x00004000 [0003.347] I> 16) Base:0x4004a000 Size:0x00002000 [0003.351] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.356] I> 18) Base:0x4004c000 Size:0x00002000 [0003.360] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.365] I> 20) Base:0x4004e000 Size:0x00002000 [0003.369] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.374] I> 22) Base:0x00000000 Size:0x00000000 [0003.378] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.383] I> 24) Base:0xcc000000 Size:0x02000000 [0003.387] I> 25) Base:0x40050000 Size:0x00002000 [0003.392] I> 26) Base:0x40040000 Size:0x00006000 [0003.396] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.400] I> 28) Base:0xc8400000 Size:0x00200000 [0003.405] I> 29) Base:0xc8800000 Size:0x00400000 [0003.409] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.414] I> 31) Base:0x00000000 Size:0x00000000 [0003.418] I> 32) Base:0xf8000000 Size:0x08000000 [0003.423] I> 33) Base:0xce000000 Size:0x2a000000 [0003.427] I> 34) Base:0xcb000000 Size:0x01000000 [0003.432] I> 35) Base:0xae000000 Size:0x01000000 [0003.436] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.441] I> 37) Base:0xca000000 Size:0x00800000 [0003.445] I> 38) Base:0x80000000 Size:0x20000000 [0003.450] I> 39) Base:0xb0000000 Size:0x08000000 [0003.454] I> 40) Base:0x00000000 Size:0x00000000 [0003.458] I> 41) Base:0x00000000 Size:0x00000000 [0003.463] I> 42) Base:0x00000000 Size:0x00000000 [0003.467] I> 43) Base:0x00000000 Size:0x00000000 [0003.472] I> 44) Base:0x00000000 Size:0x00000000 [0003.476] I> 45) Base:0x00000000 Size:0x00000000 [0003.481] GIC-SPI Target CPU: 0 [0003.484] Interrupts Init done [0003.487] calling constructors [0003.490] initializing heap [0003.492] I> Heap: [0xa0960000 ... 0xadf00000] [0003.496] initializing threads [0003.499] initializing timers [0003.502] creating bootstrap completion thread [0003.506] top of bootstrap2() [0003.509] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.514] initializing platform [0003.517] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.522] W> device prod register failed [0003.526] I> Bl_dtb @0xadf00000 [0003.529] I> gpio framework initialized [0003.541] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.550] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.554] I> fixed regulator driver initialized [0003.571] I> register 'maxim' power off handle [0003.574] I> virtual i2c enabled [0003.574] I> registered 'maxim,max20024' pmic [0003.575] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.575] I> Boot-device: QSPI [0003.575] I> Boot_device: QSPI_FLASH instance: 0 [0003.578] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.588] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.596] I> QSPI source rate = 204000 Khz [0003.599] I> Requested rate for QSPI clock = 34000 Khz [0003.604] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.609] I> tx_clk_tap_delay : 0 [0003.612] I> rx_clk_tap_delay : 16 [0003.615] I> QSPI Flash Size = 32 MB [0003.623] I> Qspi initialized successfully [0003.623] I> qspi flash-0 params source = boot args [0003.627] W> No board IDs available [0003.630] E> Failed to get board id info! [0003.636] I> sdmmc-3 params source = safe params [0003.643] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.644] W> Cannot find any partition table for 00000003 [0003.649] E> Failed to publish 00000003 [0003.659] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.675] I> regulator 'vdd-hdmi-5v0' already enabled [0003.681] I> regulator 'vdd-hdmi-5v0' already enabled [0003.681] I> hdmi cable connected [0003.685] W> set volts not configured for 'vdd-1v0' [0003.690] W> set volts not configured for 'vdd-1v8-hs' [0003.690] I> retrieved tmds range from prod_list_hdmi_soc [0003.695] E> invalid display type [0003.696] E> cannot find any other nvdisp nodes [0003.713] I> edid read success [0003.725] I> edid read success [0003.725] I> width = 640, height = 480, frequency = 25174825 [0003.726] I> width = 640, height = 480, frequency = 25174825 [0003.726] I> width = 640, height = 480, frequency = 25174825 [0003.727] I> width = 640, height = 480, frequency = 25174825 [0003.727] I> width = 1920, height = 1080, frequency = 148500000 [0003.731] I> Best mode Width = 640, Height = 480, freq = 25174825 [0003.742] I> hdmi_enable, starting HDMI initialisation [0003.747] I> hdmi_enable, HDMI initialisation complete [0003.750] initializing target [0003.750] calling apps_init() [0003.752] starting app kernel_boot_app [0003.756] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... y?TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot y? 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x277587698 SMBIOS=0xc7db0000 SMBIOS 3.0=0x258a80000 MEMATTR=0x25942f018 ESRT=0x25943f118 RNG=0x27c595918 MEMRESERVE=0x259430f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025943f118 to 0x000000025943f150. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002580a7fff] [ 0.000000] node 0: [mem 0x00000002580a8000-0x000000025826dfff] [ 0.000000] node 0: [mem 0x000000025826e000-0x00000002583effff] [ 0.000000] node 0: [mem 0x00000002583f0000-0x000000025841ffff] [ 0.000000] node 0: [mem 0x0000000258420000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x000000025877ffff] [ 0.000000] node 0: [mem 0x0000000258780000-0x0000000258a6ffff] [ 0.000000] node 0: [mem 0x0000000258a70000-0x0000000258a8ffff] [ 0.000000] node 0: [mem 0x0000000258a90000-0x00000002591fffff] [ 0.000000] node 0: [mem 0x0000000259200000-0x000000025938ffff] [ 0.000000] node 0: [mem 0x0000000259390000-0x000000025943ffff] [ 0.000000] node 0: [mem 0x0000000259440000-0x00000002595bffff] [ 0.000000] node 0: [mem 0x00000002595c0000-0x00000002595cffff] [ 0.000000] node 0: [mem 0x00000002595d0000-0x000000025969ffff] [ 0.000000] node 0: [mem 0x00000002596a0000-0x00000002596affff] [ 0.000000] node 0: [mem 0x00000002596b0000-0x00000002596fffff] [ 0.000000] node 0: [mem 0x0000000259700000-0x000000025977ffff] [ 0.000000] node 0: [mem 0x0000000259780000-0x0000000259a9ffff] [ 0.000000] node 0: [mem 0x0000000259aa0000-0x0000000259abffff] [ 0.000000] node 0: [mem 0x0000000259ac0000-0x0000000259b2ffff] [ 0.000000] node 0: [mem 0x0000000259b30000-0x0000000259fbffff] [ 0.000000] node 0: [mem 0x0000000259fc0000-0x000000025a00ffff] [ 0.000000] node 0: [mem 0x000000025a010000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/sda1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 nv-auto-config [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6939716K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 468600K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000879] Console: colour dummy device 80x25 [ 0.002326] printk: console [tty0] enabled [ 0.002406] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002443] pid_max: default: 32768 minimum: 301 [ 0.002662] LSM: Security Framework initializing [ 0.002729] Yama: becoming mindful. [ 0.002788] SELinux: Initializing. [ 0.002936] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002996] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006013] rcu: Hierarchical SRCU implementation. [ 0.006250] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007084] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007152] DTB Build time: Aug 10 2022 20:31:49 [ 0.009953] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010233] Remapping and enabling EFI services. [ 0.012139] smp: Bringing up secondary CPUs ... [ 0.042589] Detected PIPT I-cache on CPU1 [ 0.042683] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072283] Detected PIPT I-cache on CPU2 [ 0.072380] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101863] Detected PIPT I-cache on CPU3 [ 0.101952] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131728] Detected PIPT I-cache on CPU4 [ 0.131878] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161609] Detected PIPT I-cache on CPU5 [ 0.161708] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162060] smp: Brought up 1 node, 6 CPUs [ 0.162351] SMP: Total of 6 processors activated. [ 0.162408] CPU features: detected: Privileged Access Never [ 0.162442] CPU features: detected: LSE atomic instructions [ 0.162466] CPU features: detected: User Access Override [ 0.162488] CPU features: detected: 32-bit EL0 Support [ 0.162510] CPU features: detected: RAS Extension Support [ 0.162549] CPU features: detected: CRC32 instructions [ 0.162571] CPU features: detected: 32-bit EL1 Support [ 0.230951] CPU: All CPU(s) started at EL2 [ 0.236228] devtmpfs: initialized [ 0.284626] Registered cp15_barrier emulation handler [ 0.284763] Registered setend emulation handler [ 0.284797] KASLR enabled [ 0.285168] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285198] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286618] pinctrl core: initialized pinctrl subsystem [ 0.287603] SMBIOS 3.0.0 present. [ 0.287632] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288299] NET: Registered protocol family 16 [ 0.290304] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.290827] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291563] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291646] audit: initializing netlink subsys (disabled) [ 0.291975] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292340] thermal_sys: Registered thermal governor 'step_wise' [ 0.292346] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292361] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294785] cpuidle: using governor menu [ 0.295063] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295543] ASID allocator initialised with 32768 entries [ 0.295813] Serial: AMBA PL011 UART driver [ 0.299835] Tegra reboot handler registered. [ 0.364490] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.364636] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.364844] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.364896] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.365014] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.365062] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.365175] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.365224] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.365379] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.365428] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.367905] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.367961] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.367991] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.368020] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.368050] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.368078] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.368115] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.368150] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.368180] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.368205] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.368230] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.368254] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.368278] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.368302] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.368326] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.368350] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.368394] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.368501] mc-err: mcerr ops are set to t19x [ 0.380423] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.380446] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.380459] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.380470] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.387695] ACPI: Interpreter disabled. [ 0.389174] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.390737] iommu: Default domain type: Translated [ 0.390803] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.391196] SCSI subsystem initialized [ 0.391367] usbcore: registered new interface driver usbfs [ 0.391408] usbcore: registered new interface driver hub [ 0.391445] usbcore: registered new device driver usb [ 0.391876] mc: Linux media interface: v0.10 [ 0.391904] videodev: Linux video capture interface: v2.00 [ 0.392225] pps_core: LinuxPPS API ver. 1 registered [ 0.392237] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.392269] PTP clock support registered [ 0.392469] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.392802] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.392885] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.393452] Registered efivars operations [ 0.398970] FPGA manager framework [ 0.399074] Advanced Linux Sound Architecture Driver Initialized. [ 0.399681] Bluetooth: Core ver 2.22 [ 0.399716] NET: Registered protocol family 31 [ 0.399728] Bluetooth: HCI device and connection manager initialized [ 0.399762] Bluetooth: HCI socket layer initialized [ 0.399779] Bluetooth: L2CAP socket layer initialized [ 0.399801] Bluetooth: SCO socket layer initialized [ 0.401390] camchar: rtcpu character device driver loaded [ 0.402089] clocksource: Switched to clocksource arch_sys_counter [ 0.811219] VFS: Disk quotas dquot_6.6.0 [ 0.811318] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.811748] pnp: PnP ACPI: disabled [ 0.825527] la/ptsa driver initialized. [ 0.825682] NET: Registered protocol family 2 [ 0.825911] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.833593] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.833777] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.834177] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.834811] TCP: Hash tables configured (established 65536 bind 65536) [ 0.834985] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.835119] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.835464] NET: Registered protocol family 1 [ 0.836259] RPC: Registered named UNIX socket transport module. [ 0.836279] RPC: Registered udp transport module. [ 0.836294] RPC: Registered tcp transport module. [ 0.836307] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.836328] PCI: CLS 0 bytes, default 64 [ 0.836583] Trying to unpack rootfs image as initramfs... [ 1.094525] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.097466] Freeing initrd memory: 8196K [ 1.101718] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.101751] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.101788] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.102161] kvm [1]: IPA Size Limit: 40 bits [ 1.102608] kvm [1]: vgic interrupt IRQ9 [ 1.103070] kvm [1]: VHE mode initialized successfully [ 1.104456] Initialise system trusted keyrings [ 1.104732] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.111221] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.112062] NFS: Registering the id_resolver key type [ 1.112124] Key type id_resolver registered [ 1.112139] Key type id_legacy registered [ 1.112251] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.112279] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.112323] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.122371] NET: Registered protocol family 38 [ 1.122398] Key type asymmetric registered [ 1.122414] Asymmetric key parser 'x509' registered [ 1.122463] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.122706] io scheduler mq-deadline registered [ 1.122724] io scheduler kyber registered [ 1.128409] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.131474] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.131583] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.131684] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.131791] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.131870] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.137490] scrncapt: init (heads:4 wins:6 planes:4) [ 1.137583] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.138791] EINJ: ACPI disabled. [ 1.142365] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.142391] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 1.142406] tegra-pmc: ### PMC reset level: L0 [ 1.142420] tegra-pmc: ### PMC reset status reg: 0x0 [ 1.142472] tegra-pmc: PMC Prod config success [ 1.148246] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.156857] random: fast init done [ 1.165521] printk: console [ttyTCU0] enabled [ 2.732325] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.736552] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.741128] arm-smmu 10000000.iommu: stage 1 translation [ 2.746953] arm-smmu 10000000.iommu: stage 2 translation [ 2.752121] arm-smmu 10000000.iommu: nested translation [ 2.757468] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.764642] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.774696] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.778082] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.784637] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.792637] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.797675] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.802398] arm-smmu 12000000.iommu: stage 1 translation [ 2.807650] arm-smmu 12000000.iommu: stage 2 translation [ 2.813075] arm-smmu 12000000.iommu: nested translation [ 2.818765] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.825939] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.835536] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.839061] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.845364] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.853245] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.862922] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.866076] tegra_profiler: auth: init [ 2.870310] THERMAL EST: found 3 subdevs [ 2.873688] THERMAL EST num_resources: 0 [ 2.877304] [THERMAL EST subdev 0] [ 2.880885] [THERMAL EST subdev 1] [ 2.884039] [THERMAL EST subdev 2] [ 2.887544] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.894090] THERMAL EST: thz register success. [ 2.898242] THERMAL EST: end of probe, return err: 0 [ 2.903547] nvsciipc: loaded module [ 2.910881] tun: Universal TUN/TAP device driver, 1.6 [ 2.913194] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.919076] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.924853] e1000e: Intel(R) PRO/1000 Network Driver [ 2.929547] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.935884] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.941172] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.947416] PPP generic driver version 2.4.2 [ 2.951586] PPP BSD Compression module registered [ 2.956154] PPP Deflate Compression module registered [ 2.961395] PPP MPPE Compression module registered [ 2.966152] usbcore: registered new interface driver r8152 [ 2.971927] usbcore: registered new interface driver asix [ 2.977024] usbcore: registered new interface driver ax88179_178a [ 2.983400] usbcore: registered new interface driver cdc_ether [ 2.989359] usbcore: registered new interface driver net1080 [ 2.994927] usbcore: registered new interface driver cdc_subset [ 3.000712] usbcore: registered new interface driver zaurus [ 3.006667] usbcore: registered new interface driver cdc_ncm [ 3.012081] usbcore: registered new interface driver aqc111 [ 3.017746] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.024049] ohci-pci: OHCI PCI platform driver [ 3.028107] ohci-platform: OHCI generic platform driver [ 3.033973] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.040566] usbcore: registered new interface driver uas [ 3.044658] usbcore: registered new interface driver usb-storage [ 3.050548] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.056757] mousedev: PS/2 mouse device common for all mice [ 3.061810] usbcore: registered new interface driver xpad [ 3.069876] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.072563] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.080341] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.087159] i2c /dev entries driver [ 3.089966] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.095755] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.101580] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.106670] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.112163] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.117323] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.122689] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.135082] device-mapper: uevent: version 1.0.3 [ 3.135514] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.143211] cpuidle: Initializing cpuidle driver [ 3.147420] sdhci: Secure Digital Host Controller Interface driver [ 3.152148] sdhci: Copyright(c) Pierre Ossman [ 3.155988] Synopsys Designware Multimedia Card Interface Driver [ 3.162437] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.168315] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.174119] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.181605] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.200964] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.210500] vdd-1v0: supplied by regulator-dummy [ 3.216135] vdd-1v8-hs: supplied by regulator-dummy [ 3.221184] vdd-1v8-ls: supplied by regulator-dummy [ 3.226080] vdd-1v8-ao: supplied by regulator-dummy [ 3.230093] vddio-ddr-1v1: supplied by regulator-dummy [ 3.234838] vdd-rtc: supplied by regulator-dummy [ 3.236688] spmic-ldo1: supplied by regulator-dummy [ 3.238273] vdd-ao-3v3: supplied by regulator-dummy [ 3.244717] vddio-emmc-3v3: supplied by regulator-dummy [ 3.251064] spmic-ldo4: supplied by regulator-dummy [ 3.252661] vdd-usb-3v3: supplied by regulator-dummy [ 3.259197] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.265742] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.271701] spmic-ldo8: supplied by vdd-1v8-ls [ 3.273517] gpio-510 (gpio_default): hogged as output/high [ 3.275276] gpio-511 (gpio_default): hogged as output/high [ 3.277993] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.413792] max77686-rtc max77620-rtc: registered as rtc0 [ 3.415080] max77620-power max20024-power: Event recorder REG_NVERC : 0x44 [ 3.415372] max77620 4-003c: max77620 probe successful y?_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized y? 4.120767] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.121943] hid: raw HID events driver (C) Jiri Kosina [ 4.122756] usbcore: registered new interface driver usbhid [ 4.122902] usbhid: USB HID core driver [ 4.124720] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.125922] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 y? 27.086250] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.161312] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.871 ms) y? 4.211117] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.211716] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.213144] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.214137] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.216071] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.216700] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.217415] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.218739] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.219065] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.221033] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.227086] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.233231] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.238487] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.244910] denver_knobs_init:MTS_VERSION:55637613 [ 4.257490] t19x_cache tegra-cache: probed [ 4.261759] optee: probing for conduit method. [ 4.262809] optee: revision 3.16 (65cc2218) [ 4.264036] optee: dynamic shared memory is enabled [ 4.265694] optee: initialized driver [ 4.272756] nvpmodel: initialized successfully [ 4.273314] tegra_hv: get_hvd: not initialized yet [ 4.278190] user_ivc_mempool: hypervisor not present [ 4.283898] usbcore: registered new interface driver snd-usb-audio [ 4.290491] u32 classifier [ 4.291821] input device check on [ 4.295534] Actions configured [ 4.298912] Initializing XFRM netlink socket [ 4.303925] NET: Registered protocol family 10 [ 4.310404] Segment Routing with IPv6 [ 4.311421] NET: Registered protocol family 17 [ 4.315444] NET: Registered protocol family 15 [ 4.320100] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.333895] Bluetooth: RFCOMM socket layer initialized [ 4.338137] Bluetooth: RFCOMM ver 1.11 [ 4.342314] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.347864] Bluetooth: HIDP socket layer initialized [ 4.353925] 9pnet: Installing 9P2000 support [ 4.357570] Key type dns_resolver registered [ 4.362559] registered taskstats version 1 [ 4.365704] Loading compiled-in X.509 certificates [ 4.377991] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.381483] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.392160] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.393921] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.402312] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.410879] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 5.526834] tegra194-pcie 14160000.pcie: Phy link never came up [ 5.527391] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 5.527676] pci_bus 0004:00: root bus resource [bus 00-ff] [ 5.527814] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 5.528081] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 5.528359] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 5.528877] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 5.529328] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 5.550671] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 5.551150] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.553179] pcieport 0004:00:00.0: Adding to iommu group 6 [ 5.554835] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 5.556382] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 5.557879] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 5.559122] pci 0004:00:00.0: Removing from iommu group 6 [ 5.559402] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 5.563513] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 5.568573] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 5.568903] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 5.569296] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 5.572176] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.686122] tegra194-pcie 141a0000.pcie: Link up [ 5.688864] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.689186] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.689376] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.689621] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.689879] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.690308] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.690727] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.701315] pci 0005:01:00.0: [197b:0585] type 00 class 0x010601 [ 5.701769] pci 0005:01:00.0: reg 0x10: [io 0x0000-0x007f] [ 5.702123] pci 0005:01:00.0: reg 0x14: [io 0x0000-0x007f] [ 5.702390] pci 0005:01:00.0: reg 0x18: [io 0x0000-0x007f] [ 5.702763] pci 0005:01:00.0: reg 0x1c: [io 0x0000-0x007f] [ 5.703100] pci 0005:01:00.0: reg 0x20: [io 0x0000-0x007f] [ 5.703355] pci 0005:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff] [ 5.703720] pci 0005:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 5.704865] pci 0005:01:00.0: PME# supported from D3hot [ 5.715255] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 5.715543] pci 0005:00:00.0: BAR 13: assigned [io 0x100000-0x100fff] [ 5.718653] pci 0005:01:00.0: BAR 6: assigned [mem 0x1f40000000-0x1f4000ffff pref] [ 5.725931] pci 0005:01:00.0: BAR 5: assigned [mem 0x1f40010000-0x1f40011fff] [ 5.733117] pci 0005:01:00.0: BAR 0: assigned [io 0x100000-0x10007f] [ 5.739748] pci 0005:01:00.0: BAR 1: assigned [io 0x100080-0x1000ff] [ 5.745881] pci 0005:01:00.0: BAR 2: assigned [io 0x100100-0x10017f] [ 5.752406] pci 0005:01:00.0: BAR 3: assigned [io 0x100180-0x1001ff] [ 5.758687] pci 0005:01:00.0: BAR 4: assigned [io 0x100200-0x10027f] [ 5.765397] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.770667] pci 0005:00:00.0: bridge window [io 0x100000-0x100fff] [ 5.776914] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 5.784203] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.793349] pci 0005:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 5.803578] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.807872] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.813463] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.849671] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.874318] host1x 13e10000.host1x: initialized [ 5.875973] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.876902] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.878555] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.879408] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.880730] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.881355] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.882840] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.886628] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.896699] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.902981] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.913309] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.919982] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.930309] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.936975] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.946814] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.954039] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.963817] falcon 15340000.vic: Adding to iommu group 17 [ 5.979461] falcon 15340000.vic: initialized [ 5.980476] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.985553] falcon 15380000.nvjpg: initialized [ 5.986185] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.996910] falcon 154c0000.nvenc: initialized [ 5.997414] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.006559] falcon 15a80000.nvenc1: initialized [ 6.007104] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.019787] nvdec 15480000.nvdec: initialized [ 6.020303] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.029781] nvdec 15140000.nvdec1: initialized [ 6.030424] tsec 15500000.tsec: Adding to iommu group 18 [ 6.035922] tsec 15500000.tsec: initialized [ 6.036421] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.044579] tsec 15100000.tsecb: initialized [ 6.048894] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.076801] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.089627] gpio-374 (wifi-enable): hogged as output/high [ 6.089938] gpio-431 (camera-control-output-low): hogged as output/low [ 6.090352] gpio-432 (camera-control-output-low): hogged as output/low [ 6.092191] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.094477] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.095115] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.096724] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.100630] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.106794] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.112695] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.121138] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.127863] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.139475] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.144498] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.150383] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.159219] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.168504] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.175514] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.182993] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.189562] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.198857] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.205427] pva 16000000.pva0: Adding to iommu group 22 [ 6.232783] pva 16000000.pva0: initialized [ 6.237195] pva 16800000.pva1: Adding to iommu group 23 [ 6.248042] pva 16800000.pva1: initialized [ 6.252564] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.266387] nvdla 15880000.nvdla0: initialized [ 6.267956] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.277406] nvdla 158c0000.nvdla1: initialized [ 6.282137] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.282279] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.282439] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.283012] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.283046] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.283624] tegradccommon 15200000.display-hub: dma mapping done [ 6.283727] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.283983] tegradc 15210000.display: Adding to iommu group 26 [ 6.284102] tegradc 15200000.display: Adding to iommu group 26 [ 6.288095] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.288207] generic_infoframe_type: 0x87 [ 6.288430] tegradc 15200000.display: DT parsed successfully [ 6.288548] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.288811] tegra_cec 3960000.tegra_cec: probed [ 6.292425] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.292435] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.292440] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.293333] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.293345] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.294469] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 640x480 (on 0x0mm) pclk=50347983 [ 6.301210] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.310945] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.316966] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.325541] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.331267] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.339745] tegradc 15210000.display: disp0 connected to head1->sor [ 6.346589] kfuse 3830000.kfuse: initialized [ 6.354510] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.360599] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.366150] tegradc 15210000.display: DT parsed successfully [ 6.376695] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.382425] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.389750] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.460155] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.470312] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.474960] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.480733] random: crng init done [ 6.484220] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.492946] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.513521] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.513893] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.515952] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.524575] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.533003] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.539690] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.547121] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.554270] usb usb1: Product: xHCI Host Controller [ 6.559509] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.565809] usb usb1: SerialNumber: 3610000.xhci [ 6.570912] hub 1-0:1.0: USB hub found [ 6.574180] hub 1-0:1.0: 4 ports detected [ 6.578895] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.583527] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.591122] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.598770] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.606713] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.614195] usb usb2: Product: xHCI Host Controller [ 6.619180] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.625386] usb usb2: SerialNumber: 3610000.xhci [ 6.630686] hub 2-0:1.0: USB hub found [ 6.633569] hub 2-0:1.0: 4 ports detected [ 6.675172] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.681151] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.682768] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.682958] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.695750] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.696800] tegra194-cpufreq ccplex: probed with BWMGR [ 6.697897] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.698517] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.700550] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.706040] tegra194-vi5 15c10000.vi: initialized [ 6.707546] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.707749] generic_infoframe_type: 0x87 [ 6.708863] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.709762] tegradc 15200000.display: DT parsed successfully [ 6.710072] mmc0: CQHCI version 5.10 [ 6.716372] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.721583] tegradc 15200000.display: Display dc.000000003f3caf9f registered with id=0 [ 6.725235] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.725246] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.734342] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.736764] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.741276] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.747799] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.747809] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.754723] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.763467] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.782075] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.785594] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.793557] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.793565] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.800201] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 640x480 (on 0x0mm) pclk=50347983 [ 6.807829] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:5a:d4:69 [ 6.842068] usb 1-3: new high-speed USB device number 2 using tegra-xusb [ 6.843831] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.843836] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.845963] tegradc 15200000.display: probed [ 6.861218] mmc0: Command Queue Engine enabled [ 6.865240] nvethernet 2490000.ethernet: Macsec not supported [ 6.872318] mmc0: periodic cache flush enabled [ 6.878585] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.881332] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.888440] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.892079] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.899267] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.905962] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.911482] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.927104] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.932182] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.951808] Console: switching to colour frame buffer device 80x30 [ 6.958145] tegradc 15200000.display: fb registered [ 6.962884] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.970486] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.974882] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.974926] tegra-se-nvhost 15810000.se: initialized [ 6.986794] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.991870] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.998659] tegra-se-nvhost 15820000.se: initialized [ 7.002641] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 7.004476] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.010946] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7.018080] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.024595] usb 1-3: Product: USB 2.0 Hub [ 7.031588] tegra-se-nvhost 15830000.se: initialized [ 7.036478] hub 1-3:1.0: USB hub found [ 7.041015] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.043773] hub 1-3:1.0: 4 ports detected [ 7.050266] tegradc 15200000.display: hdmi: tmds rate:50349K prod-setting:prod_c_hdmi_0m_54m [ 7.050566] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.068873] tegra-se-nvhost 15840000.se: initialized [ 7.069961] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.075664] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.081488] tegradc 15200000.display: hdmi: BL set VIC 0 [ 7.089033] tegra_actmon d230000.actmon: in actmon_register()... [ 7.093204] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.099203] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.107176] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.112194] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.119226] Extcon AUX1(HDMI) enable [ 7.119375] tegradc 15210000.display: disp1 connected to head1->sor [ 7.127597] hvc_sysfs: hypervisor is not present [ 7.130843] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.149046] tegradc 15210000.display: DT parsed successfully [ 7.154300] tegradc 15210000.display: Display dc.000000008c288923 registered with id=1 [ 7.188927] ALSA device list: [ 7.189005] No soundcards found. [ 7.189378] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.189552] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.196550] tegradc 15210000.display: probed [ 7.196917] tegradc 15210000.display: fb registered [ 7.200396] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.200603] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.205879] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.207803] Freeing unused kernel memory: 3968K [ 7.215776] tegradc 15210000.display: blank - powerdown [ 7.220950] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.222241] Run /init as init process [ 7.229157] Extcon DP: HPD disabled [ 7.236666] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.243304] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.248936] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) y?RNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk y? 7.272269] tegradc 15200000.display: blank - powerdown [ 7.294641] Root device found: sda1 [ 7.317660] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.317666] Extcon AUX1(HDMI) disable [ 7.341018] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.341878] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.361989] tegradc 15200000.display: unblank [ 7.362095] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.362100] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.363170] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.363366] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.370639] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.389282] tegradc 15200000.display: sync windows ret = 247 [ 7.391188] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.391362] Extcon HDMI: HPD enabled [ 7.391503] tegradc 15200000.display: hdmi: plugged [ 7.462078] usb 1-3.1: new full-speed USB device number 3 using tegra-xusb [ 7.687569] usb 1-3.1: New USB device found, idVendor=045e, idProduct=07a5, bcdDevice= 7.97 [ 7.687798] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.687986] usb 1-3.1: Product: Microsoft® 2.4GHz Transceiver v9.0 [ 7.688137] usb 1-3.1: Manufacturer: Microsoft [ 7.695262] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/platform/3610000.xhci/usb1/1-3/1-3.1/1-3.1:1.0/0003:045E:07A5.0001/input/input1 [ 7.754332] hid-generic 0003:045E:07A5.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-3610000.xhci-3.1/input0 [ 7.760489] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse as /devices/platform/3610000.xhci/usb1/1-3/1-3.1/1-3.1:1.1/0003:045E:07A5.0002/input/input2 [ 7.761105] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control as /devices/platform/3610000.xhci/usb1/1-3/1-3.1/1-3.1:1.1/0003:045E:07A5.0002/input/input3 [ 7.761675] hid-generic 0003:045E:07A5.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-3610000.xhci-3.1/input1 [ 7.768076] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control as /devices/platform/3610000.xhci/usb1/1-3/1-3.1/1-3.1:1.2/0003:045E:07A5.0003/input/input4 [ 7.826263] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control as /devices/platform/3610000.xhci/usb1/1-3/1-3.1/1-3.1:1.2/0003:045E:07A5.0003/input/input5 [ 7.826857] hid-generic 0003:045E:07A5.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-3610000.xhci-3.1/input2 [ 8.026048] usb 1-3.2: new low-speed USB device number 4 using tegra-xusb [ 8.251806] usb 1-3.2: New USB device found, idVendor=03f0, idProduct=364a, bcdDevice= 1.22 [ 8.252045] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 8.252228] usb 1-3.2: Product: HP USB Slim Keyboard [ 8.257590] input: HP USB Slim Keyboard as /devices/platform/3610000.xhci/usb1/1-3/1-3.2/1-3.2:1.0/0003:03F0:364A.0004/input/input6 [ 8.314313] hid-generic 0003:03F0:364A.0004: input,hidraw3: USB HID v1.10 Keyboard [HP USB Slim Keyboard] on usb-3610000.xhci-3.2/input0 [ 8.318687] input: HP USB Slim Keyboard Consumer Control as /devices/platform/3610000.xhci/usb1/1-3/1-3.2/1-3.2:1.1/0003:03F0:364A.0005/input/input7 [ 8.378348] input: HP USB Slim Keyboard System Control as /devices/platform/3610000.xhci/usb1/1-3/1-3.2/1-3.2:1.1/0003:03F0:364A.0005/input/input8 [ 8.378873] input: HP USB Slim Keyboard as /devices/platform/3610000.xhci/usb1/1-3/1-3.2/1-3.2:1.1/0003:03F0:364A.0005/input/input9 [ 8.382096] hid-generic 0003:03F0:364A.0005: input,hiddev96,hidraw4: USB HID v1.10 Device [HP USB Slim Keyboard] on usb-3610000.xhci-3.2/input1 [ 17.633999] ERROR: sda1 not found [ 37.858090] vdd-1v8-sd: disabling [ 37.860225] vdd-3v3-cvb: disabling [ 37.862278] vdd-1v8-cvb: disabling [ 37.864284] vdd-epb-1v0: disabling [ 37.866326] vdd-fan: disabling [ 37.868346] vdd_sys_en: disabling