[0011.273] failed to init xhci or no usb device attached [0011.287] device_query_partition_size: failed to open partition sdmmc3_user:MSC ! [0011.294] MSC Partition not found [0011.304] device_query_partition_size: failed to open partition sdmmc3_user:USP ! [0011.311] USP partition read failed! [0011.315] blob_init: blob-partition USP header read failed [0011.320] android_boot Unable to update recovery partition [0011.326] kfs_getpartname: name = LNX [0011.329] Loading kernel from LNX [0011.420] load kernel from storage [0011.429] decompressor handler not found [0011.466] Successfully loaded kernel and ramdisk images [0011.472] load_bmp_blob: panelresolution=1080 type=3 [0011.968] display bmp image done [0011.971] NCK carveout not present [0011.974] Skipping dts_overrides [0011.977] NCK carveout not present [0011.988] Find /i2c@7000c000's alias i2c0 [0011.991] get eeprom at 1-a0, size 256, type 0 [0012.000] Find /i2c@7000c500's alias i2c2 [0012.004] get eeprom at 3-a0, size 256, type 0 [0012.009] get eeprom at 3-ae, size 256, type 0 [0012.013] pm_ids_update: Updating 1,a0, size 256, type 0 [0014.018] I2C transfer timeout [0014.021] I2C write failed [0014.024] Writing offset failed [0014.027] eeprom_init: EEPROM read failed [0014.031] pm_ids_update: eeprom init failed [0014.035] pm_ids_update: Updating 3,a0, size 256, type 0 [0014.065] pm_ids_update: The pm board id is 3448-0002-400 [0014.072] Adding plugin-manager/ids/3448-0002-400=/i2c@7000c500:module@0x50 [0014.079] pm_ids_update: pm id update successful [0014.084] pm_ids_update: Updating 3,ae, size 256, type 0 [0014.114] eeprom_init: EEPROM incompatible version found [0014.119] pm_ids_update: eeprom init failed [0014.150] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0014.155] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB [0014.164] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0014.169] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB [0014.178] updating /chosen/nvidia,ethernet-mac node 48:b0:2d:2f:d5:39 [0014.185] Plugin Manager: Parse ODM data 0x00094000 [0014.195] shim_cmdline_install: /chosen/bootargs: console=ttyS0,115200 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 video=tegrafb0:800x480-16@60 usbcore.autosuspend=-1 [0014.212] Add serial number:1421421075982 as DT property [0014.221] "bpmp" doesn't exist, creating [0014.227] Updated bpmp info to DTB [0014.232] Updated initrd info to DTB [0014.235] "proc-board" doesn't exist, creating [0014.241] Updated board info to DTB [0014.244] "pmu-board" doesn't exist, creating [0014.250] Updated board info to DTB [0014.253] "display-board" doesn't exist, creating [0014.259] Updated board info to DTB [0014.262] "reset" doesn't exist, creating [0014.267] Updated reset info to DTB [0014.270] Cmdline: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0 [0014.309] DTB cmdline: console=ttyS0,115200 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 video=tegrafb0:800x480-16@60 usbcore.autosuspend=-1 [0014.324] Updated bootarg info to DTB [0014.328] Adding uuid 00000001643073040400000009030380 to DT [0014.334] Adding eks info 0 to DT [0014.340] WARNING: Failed to pass NS DRAM ranges to TOS, err: -7 [0014.346] Updated memory info to DTB [0014.354] set vdd_core voltage to 1075 mv [0014.358] setting 'vdd-core' regulator to 1075000 micro volts [0014.379] Found secure-pmc; disable BPMP U-Boot 2020.04 (Feb 25 2021 - 11:13:12 +0000) SoC: tegra210 Model: NVIDIA Jetson Nano Developer Kit Board: NVIDIA P3450-0002 DRAM: 4 GiB MMC: sdhci@700b0000: 1, sdhci@700b0600: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 224 bytes read in 18 ms (11.7 KiB/s) 1: Boot to Qt for Embedded Linux Retrieving file: /boot/extlinux/../initrd 2115468 bytes read in 68 ms (29.7 MiB/s) Retrieving file: /boot/extlinux/../Image 37470216 bytes read in 878 ms (40.7 MiB/s) append: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 de ## Flattened Device Tree blob at 83100000 Booting using the fdt blob at 0x83100000 ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) Using Device Tree in place at 0000000083100000, end 000000008317787d copying carveout for /host1x@50000000/dc@54200000... copying carveout for /host1x@50000000/dc@54240000... Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-l4t-r32.4+g166b394331e2 (oe-user@oe-host) (gcc version 8.3.0 (GCC) ) #1 SMP PREEMPT Thu Jan 28 12:25:47 UTC 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00800000@92cb0000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefb1000 s61720 r8192 d32488 u102400 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29532(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3562308K/4159488K available (15102K kernel code, 2928K rwdata, 9964K rodata, 8576K init, 610K bss, 122044K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f40000 ( 15104 KB) [ 0.000000] .rodata : 0xffffff8008f40000 - 0xffffff8009900000 ( 9984 KB) [ 0.000000] .init : 0xffffff8009900000 - 0xffffff800a160000 ( 8576 KB) [ 0.000000] .data : 0xffffff800a160000 - 0xffffff800a43c008 ( 2929 KB) [ 0.000000] .bss : 0xffffff800a43c008 - 0xffffff800a4d4a1c ( 611 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001828] Console: colour dummy device 80x25 [ 0.002665] console [tty0] enabled [ 0.002692] kmemleak: Kernel memory leak detector disabled [ 0.002723] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.002751] pid_max: default: 32768 minimum: 301 [ 0.003225] Security Framework initialized [ 0.003460] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003482] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.004759] ftrace: allocating 47488 entries in 186 pages [ 0.179374] ASID allocator initialised with 65536 entries [ 0.216144] tegra-id: chipid=22117. [ 0.216193] tegra-id: opt_subrevision=0. [ 0.216259] Tegra Speedo/IDDQ fuse revision 4 [ 0.216276] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.216293] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.216310] Tegra: CPU Speedo Value 2057, SoC Speedo Value 1972, GPU Speedo Value 2059 [ 0.216332] Tegra: CPU IDDQ Value 1648, SoC IDDQ Value 1852, GPU IDDQ Value 2235 [ 0.216369] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.216397] DTS File Name: /media/abhijit/ext4_volume/jetson-nano-production-module/tmp/work-shared/jetson-nano-emmc/kernel-source/arch/arm64/boot/dts/../../../../nvidia/platform/t210/porg/kernel-dts/tegra21s [ 0.216439] DTB Build time: Jan 28 2021 12:25:47 [ 0.265095] CPU1: Booted secondary processor [411fd071] [ 0.296977] CPU2: Booted secondary processor [411fd071] [ 0.328954] CPU3: Booted secondary processor [411fd071] [ 0.329052] Brought up 4 CPUs [ 0.329120] SMP: Total of 4 processors activated. [ 0.329138] CPU features: detected feature: 32-bit EL0 Support [ 0.329416] CPU: All CPU(s) started at EL2 [ 0.329447] alternatives: patching kernel code [ 0.337821] devtmpfs: initialized [ 0.376780] Initilizing CustomIPI irq domain [ 0.377252] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.377301] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.388765] pinctrl core: initialized pinctrl subsystem [ 0.389544] OS set in device tree is not L4T. [ 0.390012] regulator-dummy: no parameters [ 0.390307] Initializing plugin-manager [ 0.390436] Plugin module not found [ 0.390679] node /plugin-manager/fragement@0 match with board >=3448-0002-100 [ 0.391257] node /plugin-manager/fragment@1 match with board >=3448-0002-101 [ 0.391773] node /plugin-manager/fragment@3 match with board >=3448-0002-100 [ 0.392487] node /plugin-manager/fragement@6 match with odm-data enable-tegra-wdt [ 0.392945] node /plugin-manager/fragement@8 match with odm-data enable-tegra-wdt [ 0.393659] node /plugin-manager/fragement@10 match with board >=3448-0002-300 [ 0.395783] node /plugin-manager/fragement@11 match with board >=3448-0002-300 [ 0.399274] NET: Registered protocol family 16 [ 0.400537] pstore: using zlib compression [ 0.401284] console [pstore-1] enabled [ 0.401303] pstore: Registered ramoops as persistent store backend [ 0.401322] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.417121] cpuidle: using governor menu [ 0.421599] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.423327] vdso: 2 pages (1 code @ ffffff8008f47000, 1 data @ ffffff800a164000) [ 0.423374] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.425619] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.428114] Serial: AMBA PL011 UART driver [ 0.428658] tegra_powergate_init: DONE [ 0.428695] DTS File Name: /media/abhijit/ext4_volume/jetson-nano-production-module/tmp/work-shared/jetson-nano-emmc/kernel-source/arch/arm64/boot/dts/../../../../nvidia/platform/t210/porg/kernel-dts/tegra21s [ 0.428740] DTB Build time: Jan 28 2021 12:25:47 [ 0.430887] Tegra reboot handler registered. [ 0.435493] iommu: Adding device tegra-carveouts to group 0 [ 0.435675] platform tegra-carveouts: domain=ffffffc0f9b42018 allocates as[0]=ffffffc0f9bcc0a8 [ 0.436066] iommu: Adding device smmu_test to group 1 [ 0.436134] platform smmu_test: domain=ffffffc0f9b42258 allocates as[0]=ffffffc0f9bcc110 [ 0.436972] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.437090] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.437159] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.437183] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.437217] mc-err: mcerr ops are set to t21x [ 0.446723] iommu: Adding device 70090000.xusb to group 2 [ 0.447029] iommu: Adding device 70006000.serial to group 3 [ 0.447105] platform 70006000.serial: domain=ffffffc0f948d918 allocates as[0]=ffffffc0f9bcc178 [ 0.447564] iommu: Adding device 70006040.serial to group 4 [ 0.447846] iommu: Adding device 70006200.serial to group 5 [ 0.448047] iommu: Adding device sound to group 6 [ 0.448111] platform sound: domain=ffffffc0f948de58 allocates as[0]=ffffffc0f9bcc1e0 [ 0.448700] iommu: Adding device 7000d400.spi to group 7 [ 0.449020] iommu: Adding device 7000d600.spi to group 8 [ 0.449412] iommu: Adding device 50000000.host1x to group 9 [ 0.449715] iommu: Adding device 54080000.vi to group 10 [ 0.450163] iommu: Adding device 54600000.isp to group 11 [ 0.450437] iommu: Adding device 54680000.isp to group 12 [ 0.450725] iommu: Adding device tegradc.0 to group 13 [ 0.450794] platform tegradc.0: domain=ffffffc0f94a3c18 allocates as[0]=ffffffc0f9bcc248 [ 0.455006] platform tegradc.0: IOVA linear map 0x0000000092cb0000(800000) [ 0.455421] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.455786] iommu: Adding device tegradc.1 to group 14 [ 0.455856] platform tegradc.1: domain=ffffffc0f94a3e58 allocates as[0]=ffffffc0f9bcc2b0 [ 0.460049] platform tegradc.1: IOVA linear map 0x0000000092cb0000(800000) [ 0.460461] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.460735] iommu: Adding device 54340000.vic to group 15 [ 0.461017] iommu: Adding device 544c0000.nvenc to group 16 [ 0.461241] iommu: Adding device 54500000.tsec to group 17 [ 0.461460] iommu: Adding device 54100000.tsecb to group 18 [ 0.461681] iommu: Adding device 54480000.nvdec to group 19 [ 0.461892] iommu: Adding device 54380000.nvjpg to group 20 [ 0.462952] iommu: Adding device 546c0000.i2c to group 21 [ 0.463306] iommu: Adding device 57000000.gpu to group 22 [ 0.463381] platform 57000000.gpu: domain=ffffffc0f950de58 allocates as[0]=ffffffc0f9bcc318 [ 0.463466] platform 57000000.gpu: domain=ffffffc0f950de58 allocates as[1]=ffffffc0f9bcc380 [ 0.463526] platform 57000000.gpu: domain=ffffffc0f950de58 allocates as[2]=ffffffc0f9bcc3e8 [ 0.463585] platform 57000000.gpu: domain=ffffffc0f950de58 allocates as[3]=ffffffc0f9bcc450 [ 0.464494] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.464540] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.464567] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.464588] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.464605] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.517150] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.517184] tegra-pmc: Clear bootloader IO dpd settings [ 0.517220] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.517304] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.517623] iommu: Adding device 70012000.se to group 23 [ 0.518451] iommu: Adding device 7000c000.i2c to group 24 [ 0.518727] iommu: Adding device 7000c400.i2c to group 25 [ 0.519010] iommu: Adding device 7000c500.i2c to group 26 [ 0.519295] iommu: Adding device 7000c700.i2c to group 27 [ 0.519563] iommu: Adding device 7000d000.i2c to group 28 [ 0.519830] iommu: Adding device 7000d100.i2c to group 29 [ 0.520123] iommu: Adding device sdhci-tegra.3 to group 30 [ 0.520204] platform sdhci-tegra.3: domain=ffffffc0f9585018 allocates as[0]=ffffffc0f9bcc4b8 [ 0.521114] iommu: Adding device 700d0000.xudc to group 31 [ 0.524552] vdd-ac-bat: 5000 mV [ 0.524937] vdd-5v0-sys: 5000 mV [ 0.525946] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.526009] vdd-5v0-hdmi: 5000 mV [ 0.526453] vdd-1v8-sys: 1800 mV [ 0.526876] vdd-fan: supplied by vdd-5v0-sys [ 0.526950] vdd-fan: 5000 mV [ 0.527354] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.527406] vdd-usb-vbus: 5000 mV [ 0.527936] vdd-usb-vbus2: 5000 mV [ 0.565894] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.568424] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.569575] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.569615] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.569669] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.569711] GPIO line 169 (1ym-usb-vbus-on) hogged as output/high [ 0.569750] GPIO line 65 (usb2_port1) hogged as output/low [ 0.570093] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.577910] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.578293] SCSI subsystem initialized [ 0.578822] usbcore: registered new interface driver usbfs [ 0.578897] usbcore: registered new interface driver hub [ 0.578992] usbcore: registered new device driver usb [ 0.582995] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.584992] random: fast init done [ 0.588340] vdd-core: 600 <--> 1162 mV at 1075 mV [ 0.589400] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.592237] vdd-ddr-1v1: 1150 mV [ 0.596331] vdd-pre-reg-1v35: 1350 mV [ 0.600235] vdd-1v8: 1800 mV [ 0.604235] avdd-sys-1v2: 1200 mV [ 0.608235] vdd-pex-1v0: 1050 mV [ 0.608936] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.609499] max77620-ldo3: at 3100 mV [ 0.612242] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.612812] max77620-ldo5: at 3100 mV [ 0.616236] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.620241] avdd-1v05-pll: 1050 mV [ 0.624233] avdd-io-hdmi-dp: 1050 mV [ 0.626870] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.627205] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.627548] max77620 4-003c: max77620 probe successful [ 0.630285] media: Linux media interface: v0.10 [ 0.630362] Linux video capture interface: v2.00 [ 0.631310] pps_core: LinuxPPS API ver. 1 registered [ 0.631337] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.631385] PTP clock support registered [ 0.634648] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.635511] Advanced Linux Sound Architecture Driver Initialized. [ 0.636203] Bluetooth: Core ver 2.22 [ 0.636335] NET: Registered protocol family 31 [ 0.636355] Bluetooth: HCI device and connection manager initialized [ 0.636382] Bluetooth: HCI socket layer initialized [ 0.636405] Bluetooth: L2CAP socket layer initialized [ 0.636446] Bluetooth: SCO socket layer initialized [ 0.638372] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.638414] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.638479] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.638507] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.642266] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.643478] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.643589] vdd-3v3-sys: 3300 mV [ 0.643892] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.644317] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.644811] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.644866] vdd-3v3-sd: 3300 mV [ 0.646035] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.646096] avdd-io-edp-1v05: 1050 mV [ 0.646532] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.646590] vdd-usb-hub-en: 5000 mV [ 0.647953] camchar: rtcpu character device driver loaded [ 0.648687] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.649989] clocksource: Switched to clocksource arch_sys_counter [ 0.692057] VFS: Disk quotas dquot_6.6.0 [ 0.692242] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.692752] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.693206] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.693258] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.693517] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.693543] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.693569] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.693620] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.693647] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.693682] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.693704] nvmap_page_pool_init: Total RAM pages: 1009361 [ 0.693723] nvmap_page_pool_init: nvmap page pool size: 126170 pages (492 MB) [ 0.693871] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.694310] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.695372] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.703783] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.704223] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.704503] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.704743] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.704940] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.705230] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.705251] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.705713] NET: Registered protocol family 2 [ 0.706755] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.706997] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.707544] TCP: Hash tables configured (established 32768 bind 32768) [ 0.707719] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.707818] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.708259] NET: Registered protocol family 1 [ 0.709094] RPC: Registered named UNIX socket transport module. [ 0.709125] RPC: Registered udp transport module. [ 0.709143] RPC: Registered tcp transport module. [ 0.709162] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.709457] Trying to unpack rootfs image as initramfs... [ 0.820938] Freeing initrd memory: 2064K [ 0.830887] host1x 50000000.host1x: initialized [ 0.832662] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.836048] audit: initializing netlink subsys (disabled) [ 0.836171] audit: type=2000 audit(0.683:1): initialized [ 0.836970] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.847067] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.848617] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.849452] 9p: Installing v9fs 9p2000 file system support [ 0.852954] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.853128] io scheduler noop registered [ 0.853425] io scheduler cfq registered (default) [ 0.856165] gic 702f9000.agic: GIC IRQ controller registered [ 0.859635] iommu: Adding device 702ef000.adsp to group 32 [ 0.868699] iommu: Adding device aconnect@702c0000:adsp_audio to group 33 [ 0.868885] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.869505] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x7a08c0e [ 0.869542] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.871268] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.871399] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.871525] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.871740] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 0.871853] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 0.871964] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 0.872078] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 0.872190] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 0.872290] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 0.872396] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 0.878609] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.880390] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.882346] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.883619] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.883985] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.885203] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.885480] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.885747] Adding domain tsec-pd to PM domain host1x-pd [ 0.888020] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 0.889172] tsec 54500000.tsec: initialized [ 0.890761] tsec 54100000.tsecb: initialized [ 0.891518] Adding domain nvdec-pd to PM domain host1x-pd [ 0.895198] nvdec 54480000.nvdec: initialized [ 0.896283] Adding domain vic03-pd to PM domain host1x-pd [ 0.896490] Adding domain msenc-pd to PM domain host1x-pd [ 0.896667] Adding domain nvjpg-pd to PM domain host1x-pd [ 0.901003] falcon 54340000.vic: initialized [ 0.902298] falcon 544c0000.nvenc: initialized [ 0.903642] falcon 54380000.nvjpg: initialized [ 0.908138] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=96 [ 0.908221] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 0.908274] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 0.908403] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 0.908564] display board info: id 0x0, fab 0x0 [ 0.908589] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 0.908612] tegra_cec 70015000.tegra_cec: probed [ 0.908644] generic_infoframe_type: 0x87 [ 0.908805] tegradc tegradc.0: DT parsed successfully [ 0.908876] tegradc tegradc.0: Display dc.ffffff800ae80000 registered with id=0 [ 0.909454] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781 [ 0.912825] tegradc tegradc.0: probed [ 0.918405] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.925669] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 0.926876] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 0.926914] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 0.927323] kfuse 7000fc00.kfuse: initialized [ 0.929121] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 0.930215] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.931883] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 0.931928] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 0.932517] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 0.934208] vdd-gpu: applied init 1000000uV constraint [ 0.934248] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 0.934739] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 0.939891] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.940118] No Device Node present for smmu client: serial8250 !! [ 0.940154] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 0.940253] iommu: Adding device serial8250 to group 34 [ 0.943951] console [ttyS0] disabled [ 0.944165] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.428060] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.832721] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.918016] tegra_cec 70015000.tegra_cec: Can't find physical addresse. [ 1.918021] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.237216] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.239237] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.345479] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.345489] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.345495] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.345500] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.345506] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.345909] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.362090] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 2.362095] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.362104] pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 2.362124] pci 0000:01:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref] [ 2.362143] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.362154] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.362160] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.362168] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 2.362523] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.362528] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.411568] console [ttyS0] enabled [ 3.412104] Console: switching to colour frame buffer device 240x67 [ 3.415267] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 3.415582] serial-tegra 70006200.serial: RX in PIO mode [ 3.415663] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 3.416675] [drm] Initialized [ 3.448567] tegradc tegradc.0: fb registered [ 3.448652] brd: module loaded [ 3.460641] loop: module loaded [ 3.462987] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 3.463027] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m [ 3.463518] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 3.463528] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 3.489677] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 3.489681] Extcon AUX1(HDMI) enable [ 3.490668] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 3.490732] tegradc tegradc.1: No lt-data, using default setting [ 3.490759] tegradc tegradc.1: No hpd-gpio in DT [ 3.490794] tegradc tegradc.1: DT parsed successfully [ 3.490852] tegradc tegradc.1: Display dc.ffffff800f800000 registered with id=1 [ 3.492318] tegradc tegradc.1: dpd enable lookup fail:-19 [ 3.496977] tegradc tegradc.1: probed [ 3.522123] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244 [ 3.554395] tegradc tegradc.1: fb registered [ 3.554466] tegra_profiler: version: 1.141, samples/io: 48/28 [ 3.554571] tegra_profiler: auth: init [ 3.555086] THERMAL EST: found 2 subdevs [ 3.555090] THERMAL EST num_resources: 0 [ 3.555093] [THERMAL EST subdev 0] [ 3.555097] [THERMAL EST subdev 1] [ 3.555411] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 3.555413] THERMAL EST: thz register success. [ 3.555517] THERMAL EST: end of probe, return err: 0 [ 3.556199] sd: No Scsi addr parsed to reserve index [ 3.556226] hisi_sas: driver version v1.6 [ 3.562594] libphy: Fixed MDIO Bus: probed [ 3.563155] tun: Universal TUN/TAP device driver, 1.6 [ 3.563157] tun: (C) 1999-2004 Max Krasnyansky [ 3.565072] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.565074] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.565112] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.565113] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.565147] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.565149] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.565182] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 3.565184] Copyright(c) 1999 - 2017 Intel Corporation. [ 3.565908] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 3.565927] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 3.587412] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 3.587489] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 48:b0:2d:2f:d5:39 from device tree [ 3.587911] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 3.587944] r8168 Copyright (C) 2017 Realtek NIC software team [ 3.587944] This program comes with ABSOLUTELY NO WARRANTY; for details, please see . [ 3.587944] This is free software, and you are welcome to redistribute it under certain conditions; see . [ 3.588356] PPP generic driver version 2.4.2 [ 3.588491] PPP BSD Compression module registered [ 3.588493] PPP Deflate Compression module registered [ 3.588507] PPP MPPE Compression module registered [ 3.588511] NET: Registered protocol family 24 [ 3.588558] usbcore: registered new interface driver r8152 [ 3.588599] usbcore: registered new interface driver asix [ 3.588636] usbcore: registered new interface driver ax88179_178a [ 3.588669] usbcore: registered new interface driver cdc_ether [ 3.588702] usbcore: registered new interface driver net1080 [ 3.588735] usbcore: registered new interface driver cdc_subset [ 3.588811] usbcore: registered new interface driver zaurus [ 3.588858] usbcore: registered new interface driver cdc_ncm [ 3.588893] usbcore: registered new interface driver cdc_mbim [ 3.588910] GobiNet: Fibocom_Linux_GobiNet_Driver_V2.01.00.02 [ 3.588991] usbcore: registered new interface driver GobiNet [ 3.589120] VFIO - User Level meta-driver version: 0.3 [ 3.592863] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.592876] ehci-pci: EHCI PCI platform driver [ 3.592915] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.592922] ohci-pci: OHCI PCI platform driver [ 3.592958] ohci-platform: OHCI generic platform driver [ 3.594886] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 3.595429] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 3.596473] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f90b6000 id [ 3.597506] usbcore: registered new interface driver cdc_wdm [ 3.597536] usbcore: registered new interface driver uas [ 3.597583] usbcore: registered new interface driver usb-storage [ 3.597663] usbcore: registered new interface driver usbserial [ 3.597694] usbcore: registered new interface driver option [ 3.597720] usbserial: USB Serial support registered for GSM modem (1-port) [ 3.600670] tegra-xudc-new 700d0000.xudc: device count: 1 [ 3.601649] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 3.601658] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 3.601682] tegra-xudc-new 700d0000.xudc: entering ELPG [ 3.601909] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 3.602009] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 3.602039] tegra-xusb 70090000.xusb: xHCI Host Controller [ 3.602056] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 3.602760] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 3.602797] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 3.602951] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.602956] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.602961] usb usb1: Product: xHCI Host Controller [ 3.602964] usb usb1: Manufacturer: Linux 4.9.140-l4t-r32.4+g166b394331e2 xhci-hcd [ 3.602967] usb usb1: SerialNumber: 70090000.xusb [ 3.603373] hub 1-0:1.0: USB hub found [ 3.603406] hub 1-0:1.0: 5 ports detected [ 3.603881] tegra-xusb 70090000.xusb: xHCI Host Controller [ 3.603890] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 3.603970] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.604084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.604089] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.604093] usb usb2: Product: xHCI Host Controller [ 3.604097] usb usb2: Manufacturer: Linux 4.9.140-l4t-r32.4+g166b394331e2 xhci-hcd [ 3.604101] usb usb2: SerialNumber: 70090000.xusb [ 3.604705] mousedev: PS/2 mouse device common for all mice [ 3.604708] hub 2-0:1.0: USB hub found [ 3.604740] hub 2-0:1.0: 4 ports detected [ 3.604776] usbcore: registered new interface driver xpad [ 3.702070] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 3.722868] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.724974] rtc rtc1: alarm rtc device [ 3.724986] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 3.725005] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 3.725364] i2c /dev entries driver [ 3.726889] i2c i2c-6: Added multiplexed i2c bus 7 [ 3.727187] i2c i2c-6: Added multiplexed i2c bus 8 [ 3.727192] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 3.727701] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 3.750978] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 3.751049] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 3.751078] imx219 7-0010: board setup failed [ 3.751140] imx219: probe of 7-0010 failed with error -121 [ 3.751537] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 3.774795] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 3.774870] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 3.774901] imx219 8-0010: board setup failed [ 3.774957] imx219: probe of 8-0010 failed with error -121 [ 3.775876] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.777793] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 3.777798] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 3.778120] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.778133] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 3.778140] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 3.778266] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.778275] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 3.778281] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 3.778425] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.778432] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 3.778437] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 3.778614] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 3.779184] tegra_aotag tegra-aotag: Registering sensor 0 [ 3.779229] tegra_aotag tegra-aotag: Invalid temp readout [ 3.779249] tegra_aotag tegra-aotag: Invalid temp readout [ 3.779265] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 3.779274] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 3.780014] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.780028] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 3.780165] tegra_aotag tegra-aotag: Invalid temp readout [ 3.780186] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 3.780519] parse_throttle_dt_data: Num cap clks = 6 [ 3.780523] parse_throttle_dt_data: clk=cclk_g type=2 [ 3.780528] parse_throttle_dt_data: clk=gpu type=4 [ 3.780547] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 3.780562] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 3.780580] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 3.780582] parse_throttle_dt_data: clk=emc type=3 [ 3.780932] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.781027] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.781130] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.781731] FAN dev name: pwm-fan [ 3.781775] FAN:gpio request success. [ 3.781829] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 3.782082] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 3.782195] pwm_fan_driver pwm-fan: fan tach request irq success [ 3.782202] pwm_fan_driver pwm-fan: tach period: 1000 [ 3.782280] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 3.782284] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 3.782288] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 3.782293] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 3.782297] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 3.782300] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 3.782304] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 3.782308] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 3.782312] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 3.782316] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 3.782972] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds. [ 3.783240] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1) [ 3.783950] device-mapper: uevent: version 1.0.3 [ 3.784342] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.786984] tegra210-cpufreq cpufreq: probe()...completed [ 3.787647] sdhci: Secure Digital Host Controller Interface driver [ 3.787648] sdhci: Copyright(c) Pierre Ossman [ 3.787649] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.787991] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 3.794784] tegra-se 70012000.se: tegra_se_probe: complete [ 3.795365] hidraw: raw HID events driver (C) Jiri Kosina [ 3.796535] usbcore: registered new interface driver usbhid [ 3.796536] usbhid: USB HID core driver [ 3.798652] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 3.798814] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 3.800631] nvpmodel: initialized successfully [ 3.801706] usbcore: registered new interface driver snd-usb-audio [ 3.801760] No Device Node present for smmu client: snd-soc-dummy !! [ 3.801765] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 3.801781] iommu: Adding device snd-soc-dummy to group 35 [ 3.820144] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 3.826599] OPE platform probe [ 3.826681] OPE platform probe successful [ 3.826959] OPE platform probe [ 3.827038] OPE platform probe successful [ 3.838016] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 3.857304] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 3.857430] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 3.857552] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 3.857675] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 3.857797] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 3.857916] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 3.858056] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 3.858176] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 3.858302] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 3.858421] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 3.870135] u32 classifier [ 3.870136] Actions configured [ 3.870208] Initializing XFRM netlink socket [ 3.870911] NET: Registered protocol family 10 [ 3.871632] NET: Registered protocol family 17 [ 3.871642] NET: Registered protocol family 15 [ 3.871714] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.871757] Bluetooth: RFCOMM socket layer initialized [ 3.871766] Bluetooth: RFCOMM ver 1.11 [ 3.871771] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.871776] Bluetooth: HIDP socket layer initialized [ 3.871793] 9pnet: Installing 9P2000 support [ 3.871828] Key type dns_resolver registered [ 3.872334] Registered cp15_barrier emulation handler [ 3.872346] Registered setend emulation handler [ 3.873395] registered taskstats version 1 [ 3.873971] Adding domain ve2-pd to PM domain host1x-pd [ 3.874234] Adding domain ve-pd to PM domain host1x-pd [ 3.888795] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 3.893183] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 3.893300] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 3.897425] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 3.901610] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 3.902654] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 3.933997] usb 1-3: new high-speed USB device number 2 using tegra-xusb [ 3.958382] usb 1-3: New USB device found, idVendor=0000, idProduct=0000 [ 3.958386] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.959221] hub 1-3:1.0: USB hub found [ 3.959297] hub 1-3:1.0: 3 ports detected [ 4.916071] tegradc tegradc.0: blank - powerdown [ 4.919130] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 4.919133] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 4.919138] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 4.920274] isp 54600000.isp: initialized [ 4.921281] isp 54680000.isp: initialized [ 4.931844] last reset is due to power on reset [ 4.931846] KERNEL: PMC reset status reg: 0x0 [ 4.931912] BL: PMC reset status reg: 0x0 [ 4.931914] BL: PMIC poweroff Event Recorder: 0x40 [ 4.933316] clk_cbus_recalc_rate: no gbus parent [ 4.933320] clk_cbus_round_rate: no gbus parent [ 4.933321] clk_cbus_round_rate: no gbus parent [ 4.933328] clk_cbus_recalc_rate: no gbus parent [ 4.933426] clk_cbus_recalc_rate: no gbus parent [ 4.933429] clk_cbus_round_rate: no gbus parent [ 4.933430] clk_cbus_round_rate: no gbus parent [ 4.933433] clk_cbus_recalc_rate: no gbus parent [ 4.933446] tegra_dvfs: GPU-cap: registered [ 4.933504] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 4.933506] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 4.933508] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled [ 4.935309] tegra_dvfs: vdd-gpu-vts: registered [ 4.935978] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 4.936600] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 4.937091] input: gpio-keys as /devices/gpio-keys/input/input1 [ 4.956240] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 4.956242] Extcon AUX1(HDMI) disable [ 4.966610] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:23 UTC (946688423) [ 4.967633] vi 54080000.vi: vi_probe: ++ [ 4.970248] vi 54080000.vi: initialized [ 4.972464] vi 54080000.vi: subdev nvcsi--2 bound [ 4.972568] vi 54080000.vi: subdev nvcsi--1 bound [ 4.972793] mmcblk mmc0:0001: Card claimed for testing. [ 4.974066] Disable partitions left on by BL [ 4.974069] disb [ 4.974115] bwmgr: missing cdev-type property [ 4.974208] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.974213] DRAM derating cdev registered. [ 4.975230] vdd-fan: disabling [ 4.975232] vdd-usb-vbus: disabling [ 4.975234] vdd-usb-vbus2: disabling [ 4.975241] vddio-sdmmc-ap: disabling [ 4.975322] vddio-sdmmc3-ap: disabling [ 4.975385] vdd-3v3-sd: disabling [ 4.975389] avdd-io-edp-1v05: disabling [ 4.975391] vdd-usb-hub-en: disabling [ 4.975467] ALSA device list: [ 4.975470] #0: tegra-hda at 0x70038000 irq 82 [ 4.975471] #1: tegra-snd-t210ref-mobile-rt565x [ 4.985300] tegradc tegradc.0: unblank [ 5.021220] tegradc tegradc.0: nominal-pclk:71000000 parent:71000000 div:1.0 pclk:71000000 70290000~77390000 [ 5.021269] tegradc tegradc.0: hdmi: tmds rate:71000K prod-setting:prod_c_hdmi_54m_75m [ 5.022263] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 5.022268] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 5.056991] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 5.056992] Extcon AUX1(HDMI) enable [ 5.057314] tegradc tegradc.0: sync windows ret = 250 [ 5.435576] tegradc tegradc.1: blank - powerdown [ 5.441369] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 5.441371] Extcon DP: HPD disabled [ 5.441376] hpd: hpd_switch 0 [ 5.441378] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 5.441387] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 5.441391] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 5.481827] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 5.481829] Extcon HDMI: HPD enabled [ 5.481841] tegradc tegradc.0: hdmi: plugged [ 5.502833] Freeing unused kernel memory: 8576K [ 5.525226] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.602594] systemd[1]: System time before build time, advancing clock. [ 5.620361] cgroup: cgroup2: unknown option "nsdelegate" [ 5.637848] systemd[1]: systemd 244.5+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -) [ 5.663098] systemd[1]: Detected architecture arm64. [ 5.698966] systemd[1]: Set hostname to . [ 5.893725] random: systemd: uninitialized urandom read (16 bytes read) [ 5.904341] systemd[1]: Created slice system-getty.slice. [ 5.913034] random: systemd: uninitialized urandom read (16 bytes read) [ 5.921749] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 5.931156] random: systemd: uninitialized urandom read (16 bytes read) [ 5.939814] systemd[1]: Created slice system-wpa_supplicant.slice. [ 5.949779] systemd[1]: Created slice User and Session Slice. [ 5.958917] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.970332] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.981534] systemd[1]: Reached target Paths. [ 5.989413] systemd[1]: Reached target Remote File Systems. [ 5.998584] systemd[1]: Reached target Slices. [ 6.006576] systemd[1]: Reached target Swap. [ 6.023298] systemd[1]: Listening on RPCbind Server Activation Socket. [ 6.033603] systemd[1]: Reached target RPC Port Mapper. [ 6.043389] systemd[1]: Listening on Syslog Socket. [ 6.051989] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.062669] systemd[1]: Listening on Journal Audit Socket. [ 6.071993] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.081805] systemd[1]: Listening on Journal Socket. [ 6.090907] systemd[1]: Listening on Network Service Netlink Socket. [ 6.101188] systemd[1]: Listening on udev Control Socket. [ 6.110422] systemd[1]: Listening on udev Kernel Socket. [ 6.121412] systemd[1]: Mounting Huge Pages File System... [ 6.132986] systemd[1]: Mounting POSIX Message Queue File System... [ 6.145107] systemd[1]: Mounting Kernel Debug File System... [ 6.156664] systemd[1]: Mounting Temporary Directory (/tmp)... [ 6.169098] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 6.183825] systemd[1]: Starting NVIDIA-specific startup... [ 6.196841] systemd[1]: Started Hardware RNG Entropy Gatherer Daemon. [ 6.210928] systemd[1]: Starting RPC Bind... [ 6.219785] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 6.235059] systemd[1]: Starting Journal Service... [ 6.249470] systemd[1]: Starting Load Kernel Modules... [ 6.260998] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.275411] systemd[1]: Starting udev Coldplug all Devices... [ 6.280570] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 6.298480] systemd[1]: Started RPC Bind. [ 6.307317] systemd[1]: Mounted Huge Pages File System. [ 6.317337] systemd[1]: Mounted POSIX Message Queue File System. [ 6.327349] systemd[1]: Mounted Kernel Debug File System. [ 6.336545] systemd[1]: Mounted Temporary Directory (/tmp). [ 6.347299] systemd[1]: Started Create list of static device nodes for the current kernel. [ 6.359556] systemd[1]: Started Journal Service. [ 6.382809] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 6.475480] systemd-journald[2042]: Received client request to flush runtime journal. [ 7.528511] eth0: 0xffffff800a6be000, 48:b0:2d:2f:d5:39, IRQ 405 [ 7.645598] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.774934] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 7.781827] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 8.551919] using random self ethernet address [ 8.557472] using random host ethernet address [ 8.565607] file system registered [ 8.691513] read descriptors [ 8.695895] read strings [ 8.703199] rndis0: HOST MAC fe:be:9b:59:15:85 [ 8.709178] rndis0: MAC 2a:ab:6e:b6:17:28 [ 8.713718] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 8.721433] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 8.728173] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 8.734865] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 8.742760] tegra-xudc-new 700d0000.xudc: entering ELPG [ 8.749187] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 8.756366] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 8.763118] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 8.769650] tegra-xudc-new 700d0000.xudc: entering ELPG [ 8.776258] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 9.687221] r8168: eth0: link up [ 9.712308] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 16.857245] random: crng init done [ 16.876001] random: 7 urandom warning(s) missed due to ratelimiting [ 96.156419] audit: type=1006 audit(1644219889.320:2): pid=4042 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1