[0000.190] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-1b8ce67c) [0000.198] I> bit @ 0xd480000 [0000.201] I> Boot-device: eMMC [0000.205] I> sdmmc bdev is already initialized [0000.210] I> pmic: reset reason (nverc) : 0x40 [0000.216] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0000.224] I> Found 31 partitions in SDMMC_USER (instance 3) [0000.230] I> A/B: bin_type (16) slot 0 [0000.233] I> Loading partition bpmp-fw at 0xd7800000 [0000.238] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.244] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.259] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.264] I> A/B: bin_type (17) slot 0 [0000.268] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.273] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.279] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.293] I> Binary(17) of size 465840 is loaded @ 0xd798e200 [0000.472] I> Loading SCE-FW ... [0000.475] I> A/B: bin_type (12) slot 0 [0000.478] I> Loading partition sce-fw at 0xd7300000 [0000.483] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.489] I> Addr: 0xd7300000, start-block: 58782024, num_blocks: 1 [0000.498] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.504] I> Init SCE [0000.506] I> Loading APE-FW ... [0000.509] I> A/B: bin_type (11) slot 0 [0000.513] I> Loading partition adsp-fw at 0xd7400000 [0000.517] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.523] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.532] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.538] I> Copy BTCM section [0000.541] I> A/B: bin_type (13) slot 0 [0000.545] I> Loading partition cpu-bootloader at 0x96000000 [0000.550] I> Reading two headers - addr:0x96000000 blocks:1 [0000.555] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.567] I> Binary(13) of size 277776 is loaded @ 0x96000000 [0000.572] I> A/B: bin_type (20) slot 0 [0000.576] I> Loading partition bootloader-dtb at 0x8520f400 [0000.582] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.587] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.599] I> Binary(20) of size 321760 is loaded @ 0x8520f400 [0000.605] I> A/B: bin_type (14) slot 0 [0000.608] I> Loading partition secure-os at 0x8530f600 [0000.613] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.619] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.631] I> Binary(14) of size 312752 is loaded @ 0x8530f600 [0000.638] I> TOS boot-params @ 0x85000000 [0000.642] I> TOS params prepared [0000.645] I> Loading EKS ... [0000.648] I> A/B: bin_type (15) slot 0 [0000.651] I> Loading partition eks at 0x8590f800 [0000.656] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.661] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0000.669] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.675] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.680] I> Copied encrypted keys [0000.683] I> boot profiler @ 0x275844000 [0000.687] I> boot profiler for TOS @ 0x275844000 [0000.692] I> Unhalting SCE [0000.695] I> Primary Memory Start:80000000 Size:70000000 [0000.700] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.707] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):a28d87f09 NOTICE: BL31: Built : 21:15:42, Aug 12 2019 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! keystore-demo: 141: Hello world from keystore-demo app keystore-demo: 207: main: EKB contents match expected value exit called, thread 0xffffffffea87ad58, name trusty_app_2_7d18fc60-e9fc-11e8 platform_bootstrap_epilog: trusty bootstrap complete [0001.068] I> Welcome to Cboot [0001.071] I> Cboot Version: t186-dcb303f9 [0001.074] I> CPU-BL Params @ 0x275800000 [0001.078] I> 0) Base:0x00000000 Size:0x00000000 [0001.083] I> 1) Base:0x277f00000 Size:0x00100000 [0001.087] I> 2) Base:0x277e00000 Size:0x00100000 [0001.092] I> 3) Base:0x277d00000 Size:0x00100000 [0001.096] I> 4) Base:0x277c00000 Size:0x00100000 [0001.101] I> 5) Base:0x277b00000 Size:0x00100000 [0001.105] I> 6) Base:0x277800000 Size:0x00200000 [0001.110] I> 7) Base:0x277400000 Size:0x00400000 [0001.114] I> 8) Base:0x277a00000 Size:0x00100000 [0001.119] I> 9) Base:0x277300000 Size:0x00100000 [0001.123] I> 10) Base:0x276800000 Size:0x00800000 [0001.128] I> 11) Base:0x30000000 Size:0x00040000 [0001.132] I> 12) Base:0xf0000000 Size:0x00100000 [0001.137] I> 13) Base:0x30040000 Size:0x00001000 [0001.141] I> 14) Base:0x30048000 Size:0x00001000 [0001.145] I> 15) Base:0x30049000 Size:0x00001000 [0001.150] I> 16) Base:0x3004a000 Size:0x00001000 [0001.154] I> 17) Base:0x3004b000 Size:0x00001000 [0001.159] I> 18) Base:0x3004c000 Size:0x00001000 [0001.163] I> 19) Base:0x3004d000 Size:0x00001000 [0001.168] I> 20) Base:0x3004e000 Size:0x00001000 [0001.172] I> 21) Base:0x3004f000 Size:0x00001000 [0001.177] I> 22) Base:0x00000000 Size:0x00000000 [0001.181] I> 23) Base:0xf0100000 Size:0x00010000 [0001.185] I> 24) Base:0x00000000 Size:0x00000000 [0001.190] I> 25) Base:0x00000000 Size:0x00000000 [0001.194] I> 26) Base:0x00000000 Size:0x00000000 [0001.199] I> 27) Base:0x00000000 Size:0x00000000 [0001.203] I> 28) Base:0x84400000 Size:0x00400000 [0001.208] I> 29) Base:0x30000000 Size:0x00010000 [0001.212] I> 30) Base:0x278000000 Size:0x08000000 [0001.216] I> 31) Base:0x00000000 Size:0x00000000 [0001.221] I> 32) Base:0x276000000 Size:0x00600000 [0001.225] I> 33) Base:0x80000000 Size:0x70000000 [0001.230] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.234] I> 35) Base:0x00000000 Size:0x00000000 [0001.239] I> 36) Base:0x00000000 Size:0x00000000 [0001.243] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.248] I> 38) Base:0x84000000 Size:0x00400000 [0001.252] I> 39) Base:0x96000000 Size:0x02000000 [0001.257] I> 40) Base:0x85000000 Size:0x01200000 [0001.261] I> 41) Base:0x275800000 Size:0x00500000 [0001.266] I> 42) Base:0x00000000 Size:0x00000000 [0001.270] I> 43) Base:0x00000000 Size:0x00000000 [0001.274] GIC-SPI Target CPU: 4 [0001.278] Interrupts Init done [0001.281] calling constructors [0001.284] initializing heap [0001.287] initializing threads [0001.290] initializing timers [0001.293] creating bootstrap completion thread [0001.298] top of bootstrap2() [0001.301] CPU: ARM Cortex A57 [0001.304] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.309] initializing platform [0001.312] I> Boot-device: eMMC [0001.316] I> sdmmc bdev is already initialized [0001.322] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0001.329] I> Found 31 partitions in SDMMC_USER (instance 3) [0001.334] W> opt-in fuse is not set, skip fuse_burning [0001.339] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.345] W> No valid slot number is found in scratch register [0001.350] W> Return default slot: _a [0001.354] I> A/B: bin_type (21) slot 0 [0001.357] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.371] I> Kernel_dtb @0x80000000 [0001.374] I> Bl_dtb @0x8520f400 [0001.377] I> gpio framework initialized [0001.383] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.393] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.401] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.409] E> I2C: slave not found in slaves. [0001.413] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0001.421] E> I2C_DEV: Failed to send register address 0x00000004. [0001.427] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0001.436] E> tca9539_device_init: failed to write polar reg [0001.441] E> tegrabl_tca9539_init: failed to init device! [0001.447] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.453] E> I2C: slave not found in slaves. [0001.457] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false. [0001.465] E> I2C_DEV: Failed to send register address 0x00000004. [0001.471] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0. [0001.480] E> tca9539_device_init: failed to write polar reg [0001.486] E> tegrabl_tca9539_init: failed to init device! [0001.494] I> fixed regulator driver initialized [0001.526] I> register 'maxim' power off handle [0001.532] I> virtual i2c enabled [0001.535] I> registered 'maxim,max77620' pmic [0001.539] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.552] I> Find /i2c@c250000's alias i2c7 [0001.556] I> Reading eeprom i2c=7 address=0x50 [0001.585] I> Device at /i2c@c250000:0x50 [0001.589] I> Reading eeprom i2c=7 address=0x57 [0001.593] E> I2C: slave not found in slaves. [0001.597] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.605] E> I2C_DEV: Failed to send register address 0x00000000. [0001.611] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.620] E> eeprom: Failed to read I2C slave device [0001.625] I> Eeprom read failed 0x3526070d [0001.630] I> Find /i2c@c240000's alias i2c1 [0001.634] I> Reading eeprom i2c=1 address=0x51 [0001.639] E> I2C: slave not found in slaves. [0001.643] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.651] E> I2C_DEV: Failed to send register address 0x00000000. [0001.657] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.666] E> eeprom: Retry to read I2C slave device. [0001.671] E> I2C: slave not found in slaves. [0001.675] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.683] E> I2C_DEV: Failed to send register address 0x00000000. [0001.689] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.698] E> eeprom: Failed to read I2C slave device [0001.703] I> Eeprom read failed 0x3526070d [0001.708] I> Find /i2c@3160000's alias i2c0 [0001.712] I> Reading eeprom i2c=0 address=0x50 [0001.716] E> I2C: slave not found in slaves. [0001.720] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.728] E> I2C_DEV: Failed to send register address 0x00000000. [0001.734] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.743] E> eeprom: Failed to read I2C slave device [0001.748] I> Eeprom read failed 0x3526070d [0001.753] I> Find /i2c@3180000's alias i2c2 [0001.757] I> Reading eeprom i2c=2 address=0x54 [0001.761] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.766] C> GPIO driver for chip_id 0x2 could not be found [0001.771] E> cam_eeprom_read: Can't get gpio driver [0001.776] I> Eeprom read failed 0x4d4d000d [0001.780] I> Reading eeprom i2c=2 address=0x57 [0001.784] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.789] C> GPIO driver for chip_id 0x2 could not be found [0001.794] E> cam_eeprom_read: Can't get gpio driver [0001.799] I> Eeprom read failed 0x4d4d000d [0001.803] I> create_pm_ids: id: 3310-1000-D01-B, len: 15 [0001.808] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.847] E> tegrabl_display_init_regulator: hdmi cable is not connected [0001.854] E> tegrabl_display_get_pdata, failed to parse dtb settings [0001.861] E> cannot find any other nvdisp nodes [0001.866] E> no valid display unit config found in dtb [0001.872] W> display init failed [0001.875] initializing target [0001.878] calling apps_init() [0001.881] starting app kernel_boot_app [0001.887] I> found decompressor handler: lz4-legacy [0001.891] I> decompressing BMP blob ... [0001.901] I> Kernel type = Normal [0001.905] I> Loading kernel from partition ... [0001.909] W> No valid slot number is found in scratch register [0001.914] W> Return default slot: _a [0001.918] I> A/B: bin_type (24) slot 0 [0001.922] I> Boot image size read from image header: f2d10 [0001.928] I> Boot image load address: 0x0x80400000 [0001.932] I> Loading partition kernel at 0x80400000 from device(0x1) [0002.694] I> Kernel hdr @0x80400000 [0002.697] I> Kernel dtb @0x80000000 [0002.701] I> T18x: Authenticate boot.img (bin_type 24), max size 0x4000000 [0002.708] I> T18x: Authenticate tegra194-p2888-0001-p2822-0000.dtb (bin_type 21), max size 0x100000 [0002.718] I> Checking boot.img header magic ... [0002.722] I> [OK] [0002.724] I> Valid boot.img @ 0x80400000 [0002.728] I> decompressor handler not found [0002.732] I> Copying kernel image (477378 bytes) from 0x80400800 to 0x80800000 ... [0002.739] I> Done [0002.741] I> Move ramdisk (len: 0) from 0x80475800 to 0x94830000 [0002.748] I> Updated bpmp info to DTB [0002.753] I> Ramdisk: Base: 0x94830000; Size: 0x0 [0002.758] I> Updated initrd info to DTB [0002.762] W> WARN: Fail to override "console=none" in commandline [0002.768] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.775] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.782] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.789] I> disabled_core_mask: 0xffffff0c [0002.793] W> No valid slot number is found in scratch register [0002.799] W> Return default slot: _a [0002.802] I> Active slot suffix: [0002.805] I> add_boot_slot_suffix: slot_suffix = [0002.810] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0002.846] I> Updated bootarg info to DTB [0002.850] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:c6:2d:20 [0002.856] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:c6:2d:21 [0002.863] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:c6:2d:22 [0002.870] E> Found no plugin manager ids in source DT [0002.875] W> Add plugin manager ids from board info [0002.880] E> "plugin-manager" doesn't exist, creating [0002.885] E> "ids" doesn't exist, creating [0002.889] E> "connection" doesn't exist, creating [0002.893] E> "configs" doesn't exist, creating [0002.898] I> create_pm_ids: id: 3310-1000-D01-B, len: 15 [0002.903] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.914] I> Adding plugin-manager/ids/3310-1000-D01=/i2c@c250000:module@0x50 [0002.921] E> "i2c@c250000" doesn't exist, creating [0002.926] E> "module@0x50" doesn't exist, creating [0002.932] I> Adding plugin-manager/ids/3310-1000-D01-B [0002.938] I> Adding plugin-manager/configs/3310-mem-type 00 [0002.944] I> Adding plugin-manager/configs/3310-power-config 00 [0002.950] I> Adding plugin-manager/configs/3310-misc-config 00 [0002.956] I> Adding plugin-manager/configs/3310-modem-config 00 [0002.962] I> Adding plugin-manager/configs/3310-touch-config 00 [0002.968] I> Adding plugin-manager/configs/3310-display-config 00 [0002.974] I> Adding plugin-manager/cvm [0002.978] E> "chip-id" doesn't exist, creating [0002.982] I> Adding plugin-manager/chip-id/A02P [0002.987] E> "odm-data" doesn't exist, creating [0002.991] I> Adding /chosen/plugin-manager/odm-data [0003.000] I> added [base:0x80000000, size:0x70000000] to /memory [0003.006] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.012] I> added [base:0x275e00000, size:0x200000] to /memory [0003.018] I> added [base:0x276600000, size:0x200000] to /memory [0003.023] I> added [base:0x277000000, size:0x200000] to /memory [0003.029] I> Updated memory info to DTB [0003.034] E> add_disp_param: failed to get display params for du=0 [0003.041] E> "reset" doesn't exist, creating [0003.045] E> "pmc-reset-reason" doesn't exist, creating [0003.051] E> "pmic-reset-reason" doesn't exist, creating [0003.057] I> Adding ecid(000000016450b8881c0000000afb0340) to DT [0003.063] I> disabled_core_mask: 0xffffff0c [0003.074] I> Add serial number:0424118099568 as DT property [0003.082] I> Plugin-manager override starting [0003.088] I> node /plugin-manager/fragement@0 matches [0003.098] I> node /plugin-manager/fragement@4 matches [0003.110] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.129] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.138] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.147] I> node /plugin-manager/fragment-devslp@0 matches [0003.163] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.176] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.186] I> node /plugin-manager/fragment-p3310-c01 matches [0003.198] I> node /plugin-manager/fragment-p3310-c03 matches [0003.226] I> Disable plugin-manager status in FDT [0003.230] I> Plugin-manager override finished successfully [0003.236] I> tegrabl_load_kernel_and_dtb: Done [0003.240] E> tegrabl_display_clear: display is not initialized [0003.245] W> Boot logo display failed... [0003.249] I> Kernel EP: 0x80800000, DTB: 0x80000000 U-Boot 2016.07-gd917e08cec (Aug 12 2019 - 21:16:16 -0700) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 2  1  0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 733 bytes read in 124 ms (4.9 KiB/s) L4T boot options 1: primary kernel Enter choice: 1: primary kernel Retrieving file: /boot/initrd 5565090 bytes read in 217 ms (24.5 MiB/s) Retrieving file: /boot/Image 34807816 bytes read in 872 ms (38.1 MiB/s) append: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000080000000, end 000000008005387e Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (alfredo@gohan) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1) ) #1 SMP PREEMPT Thu Nov 7 10:37:52 -03 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 1.230336] tegradc 15220000.nvdisplay: blank - powerdown [ 1.231413] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.232772] Wake73 for irq=42 [ 1.234004] rtc rtc1: alarm rtc device [ 1.234020] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.234081] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.234306] i2c /dev entries driver [ 1.235830] adv7180 6-0021: chip found @ 0x21 (31c0000.i2c) [ 1.250089] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.257112] parse_throttle_dt_data: Num cap clks = 4 [ 1.257123] parse_throttle_dt_data: clk=mcpu type=1 [ 1.257127] parse_throttle_dt_data: clk=bcpu type=2 [ 1.257136] parse_throttle_dt_data: clk=gpu type=4 [ 1.257140] parse_throttle_dt_data: clk=emc type=3 [ 1.258271] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.258912] FAN: coudln't get the regulator [ 1.260908] device-mapper: uevent: version 1.0.3 [ 1.261848] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.267102] cpufreq: platform driver Initialization: pass [ 1.267749] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.267861] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.268785] sdhci: Secure Digital Host Controller Interface driver [ 1.268788] sdhci: Copyright(c) Pierre Ossman [ 1.268790] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.270419] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.272390] CMDQ: cmdq_platfm_init successful [ 1.273583] CQE: CMD_TIMING bit set for R1B DCMD [ 1.274147] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 1.274148] Extcon AUX0(HDMI) disable [ 1.274499] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.279362] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 1.279414] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 1.280311] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 1.282159] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 255 [ 1.287919] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.289004] tegra-se-nvhost 15810000.se: initialized [ 1.290083] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.290988] tegra-se-nvhost 15820000.se: initialized [ 1.291952] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.292772] tegra-se-nvhost 15830000.se: initialized [ 1.293313] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.294064] tegra-se-nvhost 15840000.se: initialized [ 1.295023] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.295286] hidraw: raw HID events driver (C) Jiri Kosina [ 1.296101] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 1.296248] usbcore: registered new interface driver usbhid [ 1.296251] usbhid: USB HID core driver [ 1.297054] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.301779] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 1.302923] tegradc 15220000.nvdisplay: unblank [ 1.304647] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.304759] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.306015] Parent Clock set for DC plld3 [ 1.307036] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 1.307347] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 1.307518] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 1.307901] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 1.309043] tegradc 15220000.nvdisplay: hdmi: tmds rate:85500K prod-setting:prod_c_hdmi_54m_111m [ 1.309047] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 1.309125] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 1.309174] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 1.309220] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 1.309347] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 1.309750] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (51) [ 1.309752] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 1.310263] tegradc 15220000.nvdisplay: hdmi: get RGB quant from EDID. [ 1.310268] tegradc 15220000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.310899] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 1.312341] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.312808] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.312969] register_ari_mca_banks: Registered MCA ROC:IOB [ 1.313049] register_ari_mca_banks: Registered MCA ROC:CCE [ 1.313376] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.313380] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 1.313382] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 1.313466] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.313469] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 1.313472] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 1.313530] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.313533] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 1.313535] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 1.313591] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.313594] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 1.313596] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 1.313650] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.313654] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 1.313656] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 1.313713] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.313718] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 1.313720] tegra18-bridge 2100000.axip2p: bridge probed OK [ 1.313776] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.313782] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 1.313784] tegra18-bridge 2110000.axip2p: bridge probed OK [ 1.313852] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.313857] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 1.313859] tegra18-bridge 2120000.axip2p: bridge probed OK [ 1.313919] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.313924] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 1.313926] tegra18-bridge 2130000.axip2p: bridge probed OK [ 1.313982] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.313985] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 1.313988] tegra18-bridge 2140000.axip2p: bridge probed OK [ 1.314044] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.314050] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 1.314052] tegra18-bridge 2150000.axip2p: bridge probed OK [ 1.314108] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.314114] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 1.314116] tegra18-bridge 2160000.axip2p: bridge probed OK [ 1.314175] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.314181] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 1.314183] tegra18-bridge 2170000.axip2p: bridge probed OK [ 1.314240] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.314247] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 1.314249] tegra18-bridge 2180000.axip2p: bridge probed OK [ 1.314313] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.314318] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 1.314320] tegra18-bridge 2190000.axip2p: bridge probed OK [ 1.314377] tegra18_a57_serr_init: on CPU 2 a Denver Core [ 1.314451] tegra18x_actmon d230000.actmon: in actmon_register()... [ 1.314576] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.315218] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.315785] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 1.315886] denver_knobs_init:MTS_VERSION:43068234 [ 1.316835] nvadsp 2993000.adsp: in probe()... [ 1.317963] nvadsp 2993000.adsp: nvadsp_app_module_probe [ 1.320114] nvpmodel: initialized successfully [ 1.321322] trusty-virtio trusty:virtio: initializing [ 1.321591] trusty_ipc virtio0: vring0: va(pa) ffffffc1e6b56000(0) qsz 32 notifyid 1 [ 1.321601] trusty_ipc virtio0: vring1: va(pa) ffffffc1e6b6c000(0) qsz 32 notifyid 2 [ 1.321722] trusty-virtio trusty:virtio: initializing done [ 1.322891] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.323258] trusty_ipc virtio0: is online [ 1.323798] usbcore: registered new interface driver snd-usb-audio [ 1.330721] gpio tegra-gpio wake71 for gpio=125(P:5) [ 1.330777] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.341613] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 1.341782] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 1.347704] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 1.347706] Extcon AUX0(HDMI) enable [ 1.365192] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.382298] mmc0: periodic cache flush enabled [ 1.382325] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.382957] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 1.387253] mmcblk0boot0: mmc0:0001 032G34 partition 1 4.00 MiB [ 1.391509] mmcblk0boot1: mmc0:0001 032G34 partition 2 4.00 MiB [ 1.391766] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 1.394214] OPE platform probe [ 1.394285] OPE platform probe successful [ 1.395004] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 [ 1.406644] ata1: SATA link down (SStatus 0 SControl 300) [ 1.412605] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.470541] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.470638] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.470721] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.470804] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.470885] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.470964] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.471044] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.471126] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.471236] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.471317] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.471397] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 1.471477] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 1.471559] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 1.471651] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 1.471731] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 1.471815] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 1.471895] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 1.471975] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 1.472080] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 1.472161] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 1.508437] u32 classifier [ 1.508441] Actions configured [ 1.508542] Initializing XFRM netlink socket [ 1.510424] NET: Registered protocol family 10 [ 1.510931] usb 1-2: new low-speed USB device number 2 using tegra-xusb [ 1.511761] NET: Registered protocol family 17 [ 1.511776] NET: Registered protocol family 15 [ 1.511984] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.512067] Bluetooth: RFCOMM socket layer initialized [ 1.512098] Bluetooth: RFCOMM ver 1.11 [ 1.512104] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.512109] Bluetooth: HIDP socket layer initialized [ 1.512129] 9pnet: Installing 9P2000 support [ 1.512172] Key type dns_resolver registered [ 1.513000] Registered cp15_barrier emulation handler [ 1.513014] Registered setend emulation handler [ 1.514502] registered taskstats version 1 [ 1.518560] isp 15600000.isp: initialized [ 1.523689] nvcsi 150c0000.nvcsi: initialized [ 1.531649] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 1.531732] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 1.531821] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 1.531929] tegra-vi4 15700000.vi: initialized [ 1.531999] input: gpio-keys as /devices/gpio-keys/input/input2 [ 1.532901] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 1.532910] tegra-vi4 15700000.vi: subdev adv7180 6-0021 bound [ 1.532913] tegra-vi4 15700000.vi: Entity type for entity adv7180 6-0021 was not initialized! [ 1.533121] Unable to handle kernel read from unreadable memory at virtual address 00000000 [ 1.533122] Mem abort info: [ 1.533124] ESR = 0x96000005 [ 1.533125] Exception class = DABT (current EL), IL = 32 bits [ 1.533127] SET = 0, FnV = 0 [ 1.533127] EA = 0, S1PTW = 0 [ 1.533128] Data abort info: [ 1.533129] ISV = 0, ISS = 0x00000005 [ 1.533130] CM = 0, WnR = 0 [ 1.533132] [0000000000000000] user address but active_mm is swapper [ 1.533134] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 1.533137] Modules linked in: [ 1.533141] CPU: 3 PID: 1461 Comm: kworker/u12:7 Not tainted 4.9.140-tegra #1 [ 1.533142] Hardware name: quill (DT) [ 1.533153] Workqueue: events_unbound async_run_entry_fn [ 1.533155] task: ffffffc1e9582a00 task.stack: ffffffc1e9bcc000 [ 1.533160] PC is at adv7180_get_pad_format+0x34/0xb8 [ 1.533164] LR is at tegra_channel_fmts_bitmap_init+0x13c/0x268 [ 1.533165] pc : [] lr : [] pstate: 60400045 [ 1.533166] sp : ffffffc1e9bcf770 [ 1.533169] x29: ffffffc1e9bcf770 x28: 0000000000000000 [ 1.533171] x27: 0000000000000002 x26: ffffffc1eb43a518 [ 1.533174] x25: 0000000000000038 x24: 0000000000000001 [ 1.533176] x23: ffffffc1eac07c90 x22: ffffffc1eb43a770 [ 1.533178] x21: 0000000000000000 x20: ffffffc1eac07c90 [ 1.533180] x19: ffffffc1e9bcf818 x18: 0000000000000000 [ 1.533182] x17: 0000000000000000 x16: 0000000000000000 [ 1.533184] x15: 0000000000076e9b x14: 0000000000000000 [ 1.533186] x13: ffffffff00000000 x12: ffffffffffffffff [ 1.533187] x11: ffffffc1e9bcf870 x10: ffffffc1e9bcf870 [ 1.533189] x9 : 00000000ffffffd8 x8 : fffffffffffffffe [ 1.533191] x7 : ffffffc1eb43a523 x6 : 00000000ffffffd4 [ 1.533193] x5 : 0000000000000001 x4 : ffffffc1eb43a0d0 [ 1.533195] x3 : ffffff8008aee920 x2 : ffffffc1e9bcf818 [ 1.533197] x1 : 0000000000000000 x0 : 0000000000000001 [ 1.533198] [ 1.533199] Process kworker/u12:7 (pid: 1461, stack limit = 0xffffffc1e9bcc000) [ 1.533200] Call trace: [ 1.533203] [] adv7180_get_pad_format+0x34/0xb8 [ 1.533206] [] tegra_channel_fmts_bitmap_init+0x13c/0x268 [ 1.533208] [] tegra_channel_init_subdevices+0x17c/0x7b0 [ 1.533210] [] tegra_vi_graph_notify_complete+0x328/0x6d8 [ 1.533214] [] v4l2_async_test_notify+0x104/0x120 [ 1.533215] [] v4l2_async_notifier_register+0x128/0x198 [ 1.533217] [] tegra_vi_graph_init+0x228/0x278 [ 1.533219] [] tegra_vi_media_controller_init+0x1d0/0x208 [ 1.533223] [] tegra_vi4_probe+0x244/0x380 [ 1.533227] [] platform_drv_probe+0x60/0xc0 [ 1.533229] [] driver_probe_device+0xd8/0x408 [ 1.533230] [] __driver_attach+0xdc/0x128 [ 1.533233] [] bus_for_each_dev+0x5c/0xa8 [ 1.533235] [] driver_attach+0x30/0x40 [ 1.533237] [] driver_attach_async+0x20/0x60 [ 1.533240] [] async_run_entry_fn+0x48/0x158 [ 1.533242] [] process_one_work+0x1e4/0x4b0 [ 1.533244] [] worker_thread+0x50/0x4c8 [ 1.533246] [] kthread+0xec/0xf0 [ 1.533249] [] ret_from_fork+0x10/0x40 [ 1.540179] usb 1-2: New USB device found, idVendor=413c, idProduct=2005 [ 1.540185] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.540188] usb 1-2: Product: DELL USB Keyboard [ 1.540191] usb 1-2: Manufacturer: DELL [ 1.548523] input: DELL DELL USB Keyboard as /devices/3530000.xhci/usb1/1-2/1-2:1.0/0003:413C:2005.0001/input/input3 [ 1.563996] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:12 UTC (946688412) [ 1.565349] mmcblk mmc0:0001: Card claimed for testing. [ 1.577361] mmc1: hw tuning done ... [ 1.584482] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 1.602985] bpmp: mounted debugfs mirror [ 1.605008] bwmgr: missing cdev-type property [ 1.607081] hid-generic 0003:413C:2005.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-3530000.xhci-2/input0 [ 1.611205] spmic-ldo0: disabling [ 1.611395] spmic-ldo1: disabling [ 1.611564] en-vdd-sd: disabling [ 1.611566] vdd-usb0-5v: disabling [ 1.611568] vdd-usb1-5v: disabling [ 1.611570] vdd-3v3: disabling [ 1.611573] en-vdd-vcm-2v8: disabling [ 1.611575] vdd-sys-bl: disabling [ 1.611578] ALSA device list: [ 1.611581] #0: tegra-hda at 0x3518000 irq 381 [ 1.611583] #1: tegra-snd-t186ref-mobile-rt565x [ 1.817971] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.042541] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 2.065727] usb 1-3: New USB device found, idVendor=04f3, idProduct=249f [ 2.065731] usb 1-3: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 2.065733] usb 1-3: Product: Touchscreen [ 2.065735] usb 1-3: Manufacturer: ELAN [ 2.073360] input: ELAN Touchscreen as /devices/3530000.xhci/usb1/1-3/1-3:1.0/0003:04F3:249F.0002/input/input4 [ 2.073601] hid-multitouch 0003:04F3:249F.0002: input,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-3530000.xhci-3/input0 [ 2.223987] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.226024] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.534111] ---[ end trace d78bc15c6d84a9c4 ]--- [ 2.538201] Kernel panic - not syncing: Fatal exception in interrupt [ 2.538205] SMP: stopping secondary CPUs [ 2.542604] Kernel Offset: disabled [ 2.542605] Memory Limit: none [ 4.355171] trusty-log panic notifier - trusty version Built: 21:17:07 Aug 12 2019 [ 4.355171] Rebooting in 5 seconds..