[0000.166] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c368a720) [0000.175] I> Boot-device: eMMC [0000.182] I> sdmmc bdev is already initialized [0000.187] I> pmic: reset reason (nverc) : 0x0 [0000.220] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.240] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.246] W> No valid slot number is found in scratch register [0000.251] W> Return default slot: _a [0000.255] I> A/B: bin_type (16) slot 0 [0000.258] I> Loading partition bpmp-fw at 0xd7800000 [0000.263] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.269] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.294] I> Binary(16) of size 534416 is loaded @ 0xd7800000 [0000.299] W> No valid slot number is found in scratch register [0000.305] W> Return default slot: _a [0000.308] I> A/B: bin_type (17) slot 0 [0000.312] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.317] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.323] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.348] I> Binary(17) of size 604720 is loaded @ 0xd796c400 [0000.578] I> Loading SCE-FW ... [0000.581] W> No valid slot number is found in scratch register [0000.587] W> Return default slot: _a [0000.590] I> A/B: bin_type (12) slot 0 [0000.594] I> Loading partition sce-fw at 0xd7300000 [0000.599] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.604] I> Addr: 0xd7300000, start-block: 58784120, num_blocks: 1 [0000.623] I> Binary(12) of size 125632 is loaded @ 0xd7300000 [0000.629] I> Init SCE [0000.631] I> Loading APE-FW ... [0000.634] W> No valid slot number is found in scratch register [0000.640] W> Return default slot: _a [0000.643] I> A/B: bin_type (11) slot 0 [0000.647] I> Loading partition adsp-fw at 0xd7400000 [0000.652] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.657] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.676] I> Binary(11) of size 77216 is loaded @ 0xd7400000 [0000.682] I> Copy BTCM section [0000.685] W> No valid slot number is found in scratch register [0000.691] W> Return default slot: _a [0000.694] I> A/B: bin_type (13) slot 0 [0000.698] I> Loading partition cpu-bootloader at 0x96000000 [0000.703] I> Reading two headers - addr:0x96000000 blocks:1 [0000.709] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.730] I> Binary(13) of size 308800 is loaded @ 0x96000000 [0000.735] W> No valid slot number is found in scratch register [0000.741] W> Return default slot: _a [0000.744] I> A/B: bin_type (20) slot 0 [0000.748] I> Loading partition bootloader-dtb at 0x85205400 [0000.754] I> Reading two headers - addr:0x85205400 blocks:1 [0000.759] I> Addr: 0x85205400, start-block: 58742792, num_blocks: 1 [0000.780] I> Binary(20) of size 336160 is loaded @ 0x85205400 [0000.786] W> No valid slot number is found in scratch register [0000.792] W> Return default slot: _a [0000.795] I> A/B: bin_type (14) slot 0 [0000.799] I> Loading partition secure-os at 0x85305600 [0000.804] I> Reading two headers - addr:0x85305600 blocks:1 [0000.809] I> Addr: 0x85305600, start-block: 58744840, num_blocks: 1 [0000.832] I> Binary(14) of size 402864 is loaded @ 0x85305600 [0000.839] I> TOS boot-params @ 0x85000000 [0000.843] I> TOS params prepared [0000.846] I> Loading EKS ... [0000.849] I> A/B: bin_type (15) slot 0 [0000.852] I> Loading partition eks at 0x85905800 [0000.857] I> Reading two headers - addr:0x85905800 blocks:1 [0000.862] I> Addr: 0x85905800, start-block: 58757128, num_blocks: 1 [0000.881] I> Binary(15) of size 1040 is loaded @ 0x85905800 [0000.887] I> EKB detected (length: 0x400) @ 0x85905800 [0000.892] I> Copied encrypted keys [0000.895] I> boot profiler @ 0x275844000 [0000.899] I> boot profiler for TOS @ 0x275844000 [0000.904] I> Unhalting SCE [0000.907] I> Primary Memory Start:80000000 Size:70000000 [0000.912] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.919] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:17, Jul 26 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 315: key_mgnt_processing ....... hwkey-agent: 223: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete [0001.292] I> Welcome to Cboot [0001.295] I> Cboot Version: t186-00029e71 [0001.298] I> CPU-BL Params @ 0x275800000 [0001.302] I> 0) Base:0x00000000 Size:0x00000000 [0001.307] I> 1) Base:0x277f00000 Size:0x00100000 [0001.311] I> 2) Base:0x277e00000 Size:0x00100000 [0001.316] I> 3) Base:0x277d00000 Size:0x00100000 [0001.320] I> 4) Base:0x277c00000 Size:0x00100000 [0001.325] I> 5) Base:0x277b00000 Size:0x00100000 [0001.329] I> 6) Base:0x277800000 Size:0x00200000 [0001.334] I> 7) Base:0x277400000 Size:0x00400000 [0001.338] I> 8) Base:0x277a00000 Size:0x00100000 [0001.343] I> 9) Base:0x277300000 Size:0x00100000 [0001.347] I> 10) Base:0x276800000 Size:0x00800000 [0001.352] I> 11) Base:0x30000000 Size:0x00040000 [0001.356] I> 12) Base:0xf0000000 Size:0x00100000 [0001.361] I> 13) Base:0x30040000 Size:0x00001000 [0001.365] I> 14) Base:0x30048000 Size:0x00001000 [0001.370] I> 15) Base:0x30049000 Size:0x00001000 [0001.374] I> 16) Base:0x3004a000 Size:0x00001000 [0001.378] I> 17) Base:0x3004b000 Size:0x00001000 [0001.383] I> 18) Base:0x3004c000 Size:0x00001000 [0001.387] I> 19) Base:0x3004d000 Size:0x00001000 [0001.392] I> 20) Base:0x3004e000 Size:0x00001000 [0001.396] I> 21) Base:0x3004f000 Size:0x00001000 [0001.401] I> 22) Base:0x00000000 Size:0x00000000 [0001.405] I> 23) Base:0xf0100000 Size:0x00010000 [0001.409] I> 24) Base:0x00000000 Size:0x00000000 [0001.414] I> 25) Base:0x00000000 Size:0x00000000 [0001.418] I> 26) Base:0x00000000 Size:0x00000000 [0001.423] I> 27) Base:0x00000000 Size:0x00000000 [0001.427] I> 28) Base:0x84400000 Size:0x00400000 [0001.432] I> 29) Base:0x30000000 Size:0x00010000 [0001.436] I> 30) Base:0x278000000 Size:0x08000000 [0001.441] I> 31) Base:0x00000000 Size:0x00000000 [0001.445] I> 32) Base:0x276000000 Size:0x00600000 [0001.449] I> 33) Base:0x80000000 Size:0x70000000 [0001.454] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.458] I> 35) Base:0x00000000 Size:0x00000000 [0001.463] I> 36) Base:0x00000000 Size:0x00000000 [0001.467] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.472] I> 38) Base:0x84000000 Size:0x00400000 [0001.476] I> 39) Base:0x96000000 Size:0x02000000 [0001.481] I> 40) Base:0x85000000 Size:0x01200000 [0001.485] I> 41) Base:0x275800000 Size:0x00500000 [0001.490] I> 42) Base:0x00000000 Size:0x00000000 [0001.494] I> 43) Base:0x00000000 Size:0x00000000 [0001.498] GIC-SPI Target CPU: 4 [0001.502] Interrupts Init done [0001.505] calling constructors [0001.508] initializing heap [0001.511] initializing threads [0001.514] initializing timers [0001.517] creating bootstrap completion thread [0001.522] top of bootstrap2() [0001.525] CPU: ARM Cortex A57 [0001.528] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.533] initializing platform [0001.536] I> Bl_dtb @0x85205400 [0001.539] I> gpio framework initialized [0001.546] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.556] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.564] I> GPIO framework and drivers are initialized. [0001.569] I> Boot-device: eMMC [0001.576] I> sdmmc bdev is already initialized [0001.607] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.624] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.630] W> opt-in fuse is not set, skip fuse_burning [0001.635] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.641] W> No valid slot number is found in scratch register [0001.646] W> Return default slot: _a [0001.656] I> A/B: bin_type (21) slot 0 [0001.659] I> Loading kernel-dtb from partition [0001.663] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.680] I> Kernel_dtb @0x80000000 [0001.684] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.692] E> I2C: slave not found in slaves. [0001.696] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0001.704] E> I2C_DEV: Failed to send register address 0x00000004. [0001.710] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0001.719] E> tca9539_device_init: failed to write polar reg [0001.724] E> tegrabl_tca9539_init: failed to init device! [0001.730] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.736] E> I2C: slave not found in slaves. [0001.740] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false. [0001.748] E> I2C_DEV: Failed to send register address 0x00000004. [0001.754] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0. [0001.763] E> tca9539_device_init: failed to write polar reg [0001.769] E> tegrabl_tca9539_init: failed to init device! [0001.777] I> fixed regulator driver initialized [0001.810] I> register 'maxim' power off handle [0001.816] I> virtual i2c enabled [0001.819] I> registered 'maxim,max77620' pmic [0001.824] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.836] E> failed to read label property for node 287884: 13 [0001.844] E> failed to read reg property for node 287980: 13 [0001.851] E> failed to read reg property for node 288032: 13 [0001.859] E> failed to read label property for node 288116: 13 [0001.867] E> failed to read label property for node 288184: 13 [0001.874] E> failed to read reg property for node 288252: 13 [0001.882] E> failed to read reg property for node 288324: 13 [0001.892] I> Find /i2c@c250000's alias i2c7 [0001.896] I> Reading eeprom i2c=7 address=0x50 [0001.925] I> Device at /i2c@c250000:0x50 [0001.929] I> Reading eeprom i2c=7 address=0x57 [0001.933] E> I2C: slave not found in slaves. [0001.937] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.945] E> I2C_DEV: Failed to send register address 0x00000000. [0001.951] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.960] E> eeprom: Failed to read I2C slave device [0001.965] I> Eeprom read failed 0x3526070d [0001.970] I> Find /i2c@c240000's alias i2c1 [0001.974] I> Reading eeprom i2c=1 address=0x51 [0001.979] E> I2C: slave not found in slaves. [0001.983] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.991] E> I2C_DEV: Failed to send register address 0x00000000. [0001.997] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.006] E> eeprom: Retry to read I2C slave device. [0002.011] E> I2C: slave not found in slaves. [0002.015] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.023] E> I2C_DEV: Failed to send register address 0x00000000. [0002.029] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.038] E> eeprom: Failed to read I2C slave device [0002.043] I> Eeprom read failed 0x3526070d [0002.047] I> Find /i2c@3160000's alias i2c0 [0002.051] I> Reading eeprom i2c=0 address=0x50 [0002.056] E> I2C: slave not found in slaves. [0002.060] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.068] E> I2C_DEV: Failed to send register address 0x00000000. [0002.074] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0002.083] E> eeprom: Failed to read I2C slave device [0002.088] I> Eeprom read failed 0x3526070d [0002.093] I> Find /i2c@3180000's alias i2c2 [0002.097] I> Reading eeprom i2c=2 address=0x54 [0002.101] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.106] C> GPIO driver for chip_id 0x2 could not be found [0002.111] E> cam_eeprom_read: Can't get gpio driver [0002.116] I> Eeprom read failed 0x4d4d000d [0002.120] I> Reading eeprom i2c=2 address=0x57 [0002.124] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.129] C> GPIO driver for chip_id 0x2 could not be found [0002.134] E> cam_eeprom_read: Can't get gpio driver [0002.139] I> Eeprom read failed 0x4d4d000d [0002.143] I> create_pm_ids: id: 3310-1000-D00-P, len: 15 [0002.148] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.183] I> enabling 'vdd-hdmi' regulator [0002.187] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.195] E> cannot find any other nvdisp nodes [0002.199] E> no valid display unit config found in dtb [0002.205] W> display init failed [0002.208] initializing target [0002.211] calling apps_init() [0002.214] starting app kernel_boot_app [0002.236] I> found decompressor handler: lz4-legacy [0002.241] I> decompressing BMP blob ... [0002.253] I> Kernel type = Normal [0002.256] I> ########## Fixed storage boot ########## [0002.261] I> Loading kernel-bootctrl from partition [0002.265] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0002.280] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0002.287] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0002.294] W> No valid slot number is found in scratch register [0002.299] W> Return default slot: _a [0002.303] I> A/B: bin_type (24) slot 0 [0002.318] I> Boot image size read from image header: 9913d [0002.324] I> Boot image load address: 0x80400000 [0002.328] I> Loading kernel from partition [0002.332] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.274] I> Validate kernel ... [0003.277] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0003.285] I> Decrypt the buffer ... [0003.288] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0003.297] I> done [0003.299] I> Checking boot.img header magic ... [0003.303] I> [OK] [0003.305] I> kernel-dtb is already loaded [0003.309] I> Validate kernel-dtb ... [0003.312] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0003.320] I> Decrypt the buffer ... [0003.323] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0003.332] I> done [0003.333] I> Kernel hdr @0x80400000 [0003.337] I> Kernel dtb @0x80000000 [0003.340] I> decompressor handler not found [0003.344] I> Copying kernel image (627005 bytes) from 0x80400800 to 0x80600000 ... [0003.352] I> Done [0003.353] I> Move ramdisk (len: 0) from 0x8049a000 to 0x947d0000 [0003.361] I> Updated bpmp info to DTB [0003.366] I> Ramdisk: Base: 0x947d0000; Size: 0x0 [0003.371] I> Updated initrd info to DTB [0003.375] W> WARN: Fail to override "console=none" in commandline [0003.380] I> Active rootfs suffix: [0003.384] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.391] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.398] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.405] I> disabled_core_mask: 0xffffff0c [0003.409] W> No valid slot number is found in scratch register [0003.415] W> Return default slot: _a [0003.418] I> Active slot suffix: [0003.422] I> add_boot_slot_suffix: slot_suffix = [0003.426] I> Linux Cmdline: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 [0003.474] I> Updated bootarg info to DTB [0003.477] I> eeprom_get_mac_addr: MAC (type: 0): 48:b0:2d:48:5b:ab [0003.484] I> eeprom_get_mac_addr: MAC (type: 1): 48:b0:2d:48:5b:ac [0003.490] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:48:5b:ad [0003.496] E> Found no plugin manager ids in source DT [0003.501] W> Add plugin manager ids from board info [0003.506] W> "plugin-manager" doesn't exist, creating [0003.511] W> "ids" doesn't exist, creating [0003.515] W> "connection" doesn't exist, creating [0003.519] W> "configs" doesn't exist, creating [0003.524] I> create_pm_ids: id: 3310-1000-D00-P, len: 15 [0003.529] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.540] I> Adding plugin-manager/ids/3310-1000-D00=/i2c@c250000:module@0x50 [0003.547] W> "i2c@c250000" doesn't exist, creating [0003.551] W> "module@0x50" doesn't exist, creating [0003.558] I> Adding plugin-manager/ids/3310-1000-D00-P [0003.565] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.570] I> Adding plugin-manager/configs/3310-power-config 00 [0003.576] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.582] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.588] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.594] I> Adding plugin-manager/configs/3310-display-config 00 [0003.600] I> Adding plugin-manager/cvm [0003.604] W> "chip-id" doesn't exist, creating [0003.608] I> Adding plugin-manager/chip-id/A02P [0003.613] W> "odm-data" doesn't exist, creating [0003.617] I> Adding /chosen/plugin-manager/odm-data [0003.627] I> added [base:0x80000000, size:0x70000000] to /memory [0003.633] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.638] I> added [base:0x275e00000, size:0x200000] to /memory [0003.644] I> added [base:0x276600000, size:0x200000] to /memory [0003.650] I> added [base:0x277000000, size:0x200000] to /memory [0003.656] I> Updated memory info to DTB [0003.660] E> add_disp_param: failed to get display params for du=0 [0003.668] W> "reset" doesn't exist, creating [0003.672] W> "pmc-reset-reason" doesn't exist, creating [0003.677] W> "pmic-reset-reason" doesn't exist, creating [0003.684] I> Adding ecid(00000001640221001c00000013fd84c0) to DT [0003.690] I> disabled_core_mask: 0xffffff0c [0003.701] I> Add serial number:1561621034912 as DT property [0003.709] I> Plugin-manager override starting [0003.715] I> node /plugin-manager/fragement@0 matches [0003.725] I> node /plugin-manager/fragement@4 matches [0003.738] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.757] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.766] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.775] I> node /plugin-manager/fragment-devslp@0 matches [0003.786] I> node /plugin-manager/fragment-500-pcie-config matches [0003.800] I> node /plugin-manager/fragment-500-xusb-config matches [0003.822] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.835] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.845] I> node /plugin-manager/fragment-p3310-c01 matches [0003.858] I> node /plugin-manager/fragment-p3310-c03 matches [0003.892] I> Disable plugin-manager status in FDT [0003.896] I> Plugin-manager override finished successfully [0003.902] I> tegrabl_load_kernel_and_dtb: Done [0003.906] E> tegrabl_display_clear: display is not initialized [0003.912] W> Boot logo display failed... [0003.915] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2020.04-g46e4604c78 (Jul 26 2021 - 12:10:58 -0700) SoC: tegra186 Model: NVIDIA P2771-0000-500 Board: NVIDIA P2771-0000 DRAM: 7.8 GiB MMC: sdhci@3400000: 1, sdhci@3460000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Warning: ethernet@2490000 using MAC address from ROM eth0: ethernet@2490000 Hit any key to stop autoboot: 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 857 bytes read in 31 ms (26.4 KiB/s) 1: primary kernel Retrieving file: /boot/initrd 7238344 bytes read in 188 ms (36.7 MiB/s) Retrieving file: /boot/Image 33413128 bytes read in 797 ms (40 MiB/s) append: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) Using Device Tree in place at 0000000080000000, end 00000000800570b1 copying carveout for /host1x@13e00000/display-hub@15200000/display@15200000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15210000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15220000... Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253 (root@ubuntu-HP-288-Pro-G6-Microtower-PC) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef9002 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 1.040836] tegradc 15210000.nvdisplay: dc_hdmi_hotplug_init: couldn't get regulator vdd_hdmi_5v0, -517 [ 1.373235] ov9281 2-0060: probing v4l2 sensor. [ 1.377356] ov9281 2-0060: henry debug ov9281_probe() line==1179 [ 1.377419] ov9281 2-0060: Resetting ov9281 sensor [ 1.388070] ov9281 2-0060: henry debug camera_common_initialize() line==1011 [ 1.389038] extract_pixel_format: henry debug formatyuv_grey8 [ 1.389199] ov9281 2-0060: ov9281_probe: name ov9281_a [ 1.389345] ov9281 2-0060: henry debug ov9281_probe();line==1235;csi_port==0 [ 1.389382] ov9281 2-0060: henry debug ov9281_probe();line==1239;sub device name==ov9281 2-0060 [ 1.389398] ov9281 2-0060: henry debug ov9281_probe();line==1240 [ 1.389407] ov9281 2-0060: ov9281_ctrls_init++ [ 1.389965] ov9281 2-0060: henry debug ov9281_probe();line==1245 [ 1.390381] ov9281 2-0060: ov9281_power_on: power on [ 1.395847] ov9281 2-0060: henry debug ov9281_probe();line==1250 [ 1.399533] ov9281 2-0060: henry debug ov9281_probe();line==1255 [ 1.463224] ov9281 2-0060: henry debug ov9281_probe();line==1282 [ 1.463280] ov9281 2-0060: ov9281_power_off: power off [ 1.464017] ov9281 2-0010: probing v4l2 sensor. [ 1.465618] ov9281 2-0010: henry debug ov9281_probe() line==1179 [ 1.465636] ov9281 2-0010: Resetting ov9281 sensor [ 1.476197] ov9281 2-0010: henry debug camera_common_initialize() line==1011 [ 1.476440] extract_pixel_format: henry debug formatyuv_grey8 [ 1.476503] ov9281 2-0010: ov9281_probe: name ov9281_b [ 1.476576] ov9281 2-0010: henry debug ov9281_probe();line==1235;csi_port==1 [ 1.476588] ov9281 2-0010: henry debug ov9281_probe();line==1239;sub device name==ov9281 2-0010 [ 1.476594] ov9281 2-0010: henry debug ov9281_probe();line==1240 [ 1.476604] ov9281 2-0010: ov9281_ctrls_init++ [ 1.476743] ov9281 2-0010: henry debug ov9281_probe();line==1245 [ 1.476826] ov9281 2-0010: ov9281_power_on: power on [ 1.482228] ov9281 2-0010: henry debug ov9281_probe();line==1250 [ 1.482710] ov9281 2-0010: henry debug ov9281_probe();line==1255 [ 1.543089] ov9281 2-0010: henry debug ov9281_probe();line==1282 [ 1.543125] ov9281 2-0010: ov9281_power_off: power off [ 1.590247] FAN: coudln't get the regulator [ 2.347181] cgroup: cgroup2: unknown option "nsdelegate" [ 3.430359] ov9281 2-0010: ov9281_power_on: power on [ 3.437602] ov9281 2-0060: ov9281_power_on: power on [ 3.444381] ov9281 2-0010: ov9281_power_off: power off [ 3.480564] ov9281 2-0060: ov9281_power_off: power off [ 3.551228] random: crng init done [ 3.554655] random: 7 urandom warning(s) missed due to ratelimiting [ 4.814633] using random self ethernet address [ 4.819141] using random host ethernet address [ 5.193425] using random self ethernet address [ 5.197975] using random host ethernet address [ 6.730653] Please complete system configuration setup on desktop to proceed...