: [0012.490] I> Invalid option: d [0012.490] I> Enter choice: [0013.356] I> Invalid option: d [0013.356] I> Enter choice: ▒▒ [0000.189] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet leve l 2 from HW fuses. [0000.197] I> MB1 (prd-version: 1.5.1.7-t194-41334769-98030a79) [0000.202] I> Boot-mode: Coldboot [0000.205] I> Chip revision : A02P [0000.208] I> Bootrom patch version : 15 (correctly patched) [0000.214] I> ATE fuse revision : 0x200 [0000.217] I> Ram repair fuse : 0x0 [0000.220] I> Ram Code : 0x2 [0000.223] I> rst_source : 0x0 [0000.225] I> rst_level : 0x0 [0000.229] I> Boot-device: eMMC [0000.244] I> sdmmc DDR50 mode [0000.248] W> No valid slot number is found in scratch register [0000.253] W> Return default slot: _a [0000.257] I> Active Boot chain : 0 [0000.260] I> Boot-device: eMMC [0000.264] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.271] I> Temperature = 31500 [0000.274] W> Skipping boost for clk: BPMP_CPU_NIC [0000.279] W> Skipping boost for clk: BPMP_APB [0000.283] W> Skipping boost for clk: AXI_CBB [0000.287] W> Skipping boost for clk: AON_CPU_NIC [0000.291] W> Skipping boost for clk: CAN1 [0000.295] W> Skipping boost for clk: CAN2 [0000.299] I> Boot-device: eMMC [0000.302] I> Boot-device: eMMC [0000.311] I> Sdmmc: HS400 mode enabled [0000.316] I> ECC region[0]: Start:0x0, End:0x0 [0000.320] I> ECC region[1]: Start:0x0, End:0x0 [0000.324] I> ECC region[2]: Start:0x0, End:0x0 [0000.328] I> ECC region[3]: Start:0x0, End:0x0 [0000.332] I> ECC region[4]: Start:0x0, End:0x0 [0000.336] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.342] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.346] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.351] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.355] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.361] E> FAILED: Thermal config [0000.368] E> FAILED: MEMIO rail config [0000.386] I> Boot-device: eMMC [0000.396] I> sdmmc bdev is already initialized [0000.469] I> MB1 done ▒▒▒▒main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ▒▒ [0000.477] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-938a8c d8) [0000.477] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.478] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.478] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.484] W> device prod register failed [0000.488] I> Boot-device: eMMC [0000.491] I> Boot_device: SDMMC_BOOT instance: 3 [0000.497] I> sdmmc-3 params source = boot args [0000.500] I> sdmmc bdev is already initialized [0000.504] I> sdmmc-3 params source = boot args [0000.512] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.519] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.520] W> No valid slot number is found in scratch register [0000.525] W> Return default slot: _a [0000.528] I> Active Boot chain : 0 [0000.532] I> parsing oem signed section of bpmp-fw header done [0000.537] I> bpmp-fw binary init read from storage [0000.542] I> oem authentication of bpmp-fw header done [0000.549] I> bpmp-fw binary done read from storage [0000.552] I> bpmp-fw: Authentication init Done [0000.556] I> parsing oem signed section of cpubl header done [0000.561] I> cpubl binary init read from storage [0000.566] I> bpmp-fw: Authentication Finalize Done [0000.571] I> oem authentication of cpubl header done [0000.575] I> cpubl binary done read from storage [0000.580] I> cpubl: Authentication init Done [0000.585] I> parsing oem signed section of rce header done [0000.589] I> rce binary init read from storage [0000.594] I> Relocating BR-BCT [0000.597] I> cpubl: Authentication Finalize Done [0000.601] I> oem authentication of rce header done [0000.605] I> rce binary done read from storage [0000.610] I> rce: Authentication init Done [0000.615] I> parsing oem signed section of ape header done [0000.619] I> ape binary init read from storage [0000.624] I> rce: Authentication Finalize Done [0000.628] I> oem authentication of ape header done [0000.632] I> ape binary done read from storage [0000.637] I> ape: Authentication init Done [0000.641] I> parsing oem signed section of tos header done [0000.646] I> tos binary init read from storage [0000.650] I> ape: Authentication Finalize Done [0000.655] I> oem authentication of tos header done [0000.659] I> tos binary done read from storage [0000.663] I> tos: Authentication init Done [0000.668] I> parsing oem signed section of bpmp-fw-dtb header done [0000.673] I> bpmp-fw-dtb binary init read from storage [0000.678] I> tos: Authentication Finalize Done [0000.684] I> oem authentication of bpmp-fw-dtb header done [0000.691] I> bpmp-fw-dtb binary done read from storage [0000.693] I> bpmp-fw-dtb: Authentication init Done [0000.698] I> parsing oem signed section of cpubl-dtb header done [0000.703] I> cpubl-dtb binary init read from storage [0000.708] I> bpmp-fw-dtb: Authentication Finalize Done [0000.746] I> oem authentication of cpubl-dtb header done [0000.747] I> cpubl-dtb binary done read from storage [0000.748] I> cpubl-dtb: Authentication init Done [0000.750] I> parsing oem signed section of eks header done [0000.750] I> eks binary init read from storage [0000.751] I> cpubl-dtb: Authentication Finalize Done [0000.751] I> oem authentication of eks header done [0000.755] I> eks binary done read from storage [0000.759] I> eks: Authentication init Done [0000.763] I> eks: Authentication Finalize Done [0000.768] I> EKB detected (length: 0x410) @ VA:0x52700400 ▒▒NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:32, Jul 26 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 315: key_mgnt_processing ....... hwkey-agent: 223: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete ▒▒ welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized ▒▒ ▒▒mrq initialized ▒▒[0001.271] I> Welcome to Cboot ▒▒fmon_post initialized ▒▒[0001.271] I> Cboot Version: t194-cfa2bc91 [0001.272] I> CPU-BL Params @ 0xf2820000 [0001.272] I> 0) Base:0x00000000 Size:0x00000000 [0001.276] I> 1) Base:0xf1100000 Size:0x00100000 [0001.280] I> 2) Base:0xf2000000 Size:0x00200000 [0001.285] I> 3) Base:0xf1200000 Size:0x00200000 ▒▒clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ▒▒[0001.289] I> 4) Base:0xf1000000 Size:0x00100000 [0001.369] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.373] I> 6) Base:0xf3800000 Size:0x00400000 [0001.378] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.382] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.386] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.391] I> 10) Base:0xf3000000 Size:0x00800000 [0001.395] I> 11) Base:0x40000000 Size:0x00040000 [0001.400] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.404] I> 13) Base:0x40046000 Size:0x00002000 [0001.409] I> 14) Base:0x40048000 Size:0x00002000 ▒▒emc_debugfs initialized dvs_debugfs initialized ▒▒[0001.413] I> 15) Base:0xac000000 Size:0x00004000▒▒fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ▒▒ [0001.468] I> 16) Base:0x4004a000 Size:0x00002000 [0001.473] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.477] I> 18) Base:0x4004c000 Size:0x00002000 [0001.482] I> 19) Base:0xf2200000 Size:0x00600000 [0001.486] I> 20) Base:0x4004e000 Size:0x00002000 [0001.491] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.495] I> 22) Base:0x00000000 Size:0x00000000 [0001.500] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.504] I> 24) Base:0xf6000000 Size:0x02000000 [0001.509] I> 25) Base:0x40050000 Size:0x00002000 [0001.513] I> 26) Base:0x40040000 Size:0x00006000 [0001.518] I> 27) Base:0xf1800000 Size:0x00400000 [0001.522] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.526] I> 29) Base:0xf1400000 Size:0x00400000 [0001.531] I> 30) Base:0x00000000 Size:0x00000000 [0001.535] I> 31) Base:0x00000000 Size:0x00000000 [0001.540] I> 32) Base:0xf8000000 Size:0x08000000 [0001.544] I> 33) Base:0x00000000 Size:0x00000000 [0001.549] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.553] I> 35) Base:0xab000000 Size:0x01000000 [0001.558] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.562] I> 37) Base:0xf2800000 Size:0x00800000 [0001.567] I> 38) Base:0x80000000 Size:0x20000000 [0001.571] I> 39) Base:0xb0000000 Size:0x08000000 [0001.576] I> 40) Base:0x00000000 Size:0x00000000 [0001.580] I> 41) Base:0x00000000 Size:0x00000000 [0001.584] I> 42) Base:0x00000000 Size:0x00000000 [0001.589] I> 43) Base:0x00000000 Size:0x00000000 [0001.593] I> 44) Base:0x00000000 Size:0x00000000 [0001.598] I> 45) Base:0x00000000 Size:0x00000000 [0001.602] GIC-SPI Target CPU: 0 [0001.605] Interrupts Init done [0001.608] calling constructors [0001.611] initializing heap [0001.614] I> Heap: [0xa0699b80 ... 0xab000000] [0001.618] initializing threads [0001.621] initializing timers [0001.624] creating bootstrap completion thread [0001.628] top of bootstrap2() [0001.631] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.635] initializing platform [0001.638] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.644] W> device prod register failed [0001.648] I> Bl_dtb @0xaaf00000 [0001.652] W> "plugin-manager" doesn't exist, creating [0001.655] W> "ids" doesn't exist, creating [0001.660] W> "connection" doesn't exist, creating [0001.664] W> "configs" doesn't exist, creating [0001.676] E> failed to read label property for node 141652: 13 [0001.678] E> failed to read reg property for node 141740: 13 [0001.681] E> failed to read label property for node 141792: 13 [0001.686] E> failed to read label property for node 141860: 13 [0001.692] E> failed to read label property for node 141896: 13 [0001.697] E> failed to read label property for node 141932: 13 [0001.703] E> failed to read reg property for node 142000: 13 [0001.708] E> failed to read label property for node 142052: 13 [0001.715] I> Find /i2c@3160000's alias i2c0 [0001.717] I> Reading eeprom i2c=0 address=0x50 [0001.747] I> Device at /i2c@3160000:0x50 [0001.747] I> Reading eeprom i2c=0 address=0x56 [0001.748] E> I2C: slave not found in slaves. [0001.748] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start tr ue. [0001.749] E> I2C_DEV: Failed to send register address 0x00000000. [0001.750] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0001.757] E> eeprom: Failed to read I2C slave device [0001.762] I> Eeprom read failed 0x3526070d [0001.767] I> Find /i2c@3180000's alias i2c2 [0001.770] I> Reading eeprom i2c=2 address=0x54 [0001.775] E> I2C: slave not found in slaves. [0001.778] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start tr ue. [0001.786] E> I2C_DEV: Failed to send register address 0x00000000. [0001.792] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.801] E> eeprom: Failed to read I2C slave device [0001.806] I> Eeprom read failed 0x3526070d [0001.810] I> Reading eeprom i2c=2 address=0x57 [0001.814] E> I2C: slave not found in slaves. [0001.818] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start tr ue. [0001.826] E> I2C_DEV: Failed to send register address 0x00000000. [0001.832] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.841] E> eeprom: Failed to read I2C slave device [0001.846] I> Eeprom read failed 0x3526070d [0001.850] I> Reading eeprom i2c=2 address=0x52 [0001.854] E> I2C: slave not found in slaves. [0001.858] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start tr ue. [0001.866] E> I2C_DEV: Failed to send register address 0x00000000. [0001.872] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.881] E> eeprom: Failed to read I2C slave device [0001.886] I> Eeprom read failed 0x3526070d [0001.891] I> Find /i2c@c240000's alias i2c1 [0001.894] I> Reading eeprom i2c=1 address=0x52 [0001.900] E> I2C: slave not found in slaves. [0001.902] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start tr ue. [0001.910] E> I2C_DEV: Failed to send register address 0x00000000. [0001.916] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.925] E> eeprom: Retry to read I2C slave device. [0001.930] E> I2C: slave not found in slaves. [0001.934] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start tr ue. [0001.942] E> I2C_DEV: Failed to send register address 0x00000000. [0001.948] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.957] E> eeprom: Failed to read I2C slave device [0001.962] I> Eeprom read failed 0x3526070d [0001.966] I> Reading eeprom i2c=1 address=0x50 [0001.970] E> I2C: slave not found in slaves. [0001.974] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start tr ue. [0001.982] E> I2C_DEV: Failed to send register address 0x00000000. [0001.988] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.997] E> eeprom: Retry to read I2C slave device. [0002.002] E> I2C: slave not found in slaves. [0002.006] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start tr ue. [0002.014] E> I2C_DEV: Failed to send register address 0x00000000. [0002.020] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0002.029] E> eeprom: Failed to read I2C slave device [0002.034] I> Eeprom read failed 0x3526070d [0002.038] I> create_pm_ids: id: 2888-0004-400-P, len: 15 [0002.043] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00 ,touch-config:00,display-config:00,, len: 93 [0002.054] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0002.062] W> "i2c@3160000" doesn't exist, creating [0002.066] W> "module@0x50" doesn't exist, creating [0002.071] I> Adding plugin-manager/cvm [0002.074] W> "chip-id" doesn't exist, creating [0002.078] I> Adding plugin-manager/chip-id/A02P [0002.083] I> Plugin-manager override starting [0002.088] I> Disable plugin-manager status in FDT [0002.091] I> Plugin-manager override finished successfully [0002.097] I> gpio framework initialized [0002.101] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driv er [0002.109] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.115] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.122] W> fetch_driver_phandle_from_dt: failed to get node with compatible t i,tca9539 [0002.130] W> fetch_driver_phandle_from_dt: failed to get node with compatible n xp,tca9539 [0002.137] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.143] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.150] W> fetch_driver_phandle_from_dt: failed to get node with compatible t i,tca9539 [0002.158] W> fetch_driver_phandle_from_dt: failed to get node with compatible n xp,tca9539 [0002.165] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.172] I> fixed regulator driver initialized [0002.181] I> register 'maxim' power off handle [0002.182] I> virtual i2c enabled [0002.183] I> registered 'maxim,max20024' pmic [0002.187] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.194] I> Boot-device: eMMC [0002.197] I> Boot_device: SDMMC_BOOT instance: 3 [0002.205] I> sdmmc-3 params source = boot args [0002.206] I> create_pm_ids: id: 2888-0004-400-P, len: 15 [0002.211] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00 ,touch-config:00,display-config:00,, len: 93 [0002.222] I> sdmmc bdev is already initialized [0002.226] I> sdmmc-3 params source = boot args [0002.256] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.269] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.276] E> no regulator info present for avdd_hdmi-supply [0002.276] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.280] E> no regulator info present for avdd_hdmi-supply [0002.281] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.282] E> cannot find any other nvdisp nodes [0002.282] E> no valid display unit config found in dtb [0002.285] W> display init failed [0002.287] I> Load in CBoot Boot Options partition and parse it [0002.298] E> Error -9 when finding node with path /boot-configuration [0002.299] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file . [0002.306] I> Using default boot order [0002.309] I> boot-dev-order :- [0002.312] I> 1.sd [0002.314] I> 2.usb [0002.316] I> 3.nvme [0002.318] I> 4.emmc [0002.320] I> 5.net [0002.322] I> Hit any key to stop autoboot: 4 3 2 1 [0004.329] initializing target [0004.329] calling apps_init() [0004.330] starting app kernel_boot_app [0004.349] I> found decompressor handler: lz4-legacy [0004.350] I> decompressing BMP blob ... [0004.361] I> Kernel type = Normal [0004.361] I> ########## SD (0) boot ########## [0004.362] I> No sdcard [0004.362] I> -0 params source = [0004.362] E> Blockdev open: exit error [0004.362] E> SD boot failed, err: 724238353 [0004.363] I> ########## USB (0) boot ########## [0004.368] W> No valid slot number is found in scratch register [0004.368] W> Return default slot: _a [0004.376] I> Validate XUSB-FW ... [0004.376] I> T19x: Authenticate XUSB-FW (bin_type: 11), max size 0x28000 [0004.381] I> Encryption fuse is not ON [0004.383] I> USB Firmware Version: 60.09 release [0004.444] I> enabling 'vdd-5v-sata' regulator [0004.449] I> regulator of usb2-1 already enabled [0004.455] I> regulator of usb2-2 already enabled [0004.460] I> regulator of usb2-3 already enabled [0005.464] E> failed to initialize xhci controller [0005.464] E> Error in init of XUSB host driver, err: 79790026 [0005.465] W> Failed to initialize device 5-0 [0005.465] E> USB boot failed, err: 2037973030 [0005.465] I> ########## NVME (0) boot ########## [0005.466] I> Initializing nvme device instance 0 [0005.466] I> Initializing nvme controller [0005.470] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0005.476] I> vpcie3v3-supply not found [0005.480] I> vpcie12v-supply not found [0005.483] W> Failed to get nvidia,plat-gpios [0005.488] I> tegrabl_pcie_soc_preinit: (0): [0005.492] I> Unpowergate [0005.494] I> tegrabl_car_clk_disable(0) ... [0005.498] I> tegrabl_car_rst_set(CORE, 0) ... [0005.502] I> tegrabl_car_rst_set(APB, 0) ... [0005.506] I> tegrabl_car_clk_enable(0) ... [0005.510] I> tegrabl_car_rst_clear(APB, 0) ... [0005.515] I> tegrabl_set_ctrl_state(0) [0005.518] I> CLR PCIE_APB:6 [0005.521] I> tegrabl_pcie_soc_init: (0): [0005.524] I> APPL initialization ... [0005.528] I> poweron phys [0005.531] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0005.537] I> tegrabl_power_on_phy: power on phy @0x3e30000 [0005.542] I> tegrabl_power_on_phy: power on phy @0x3e40000 [0005.548] I> tegrabl_power_on_phy: power on phy @0x3e50000 [0005.553] I> tegrabl_power_on_phy: power on phy @0x3e60000 [0006.658] C> Failed to link up controller-0 [0006.659] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0006.659] I> Failed to initialize SoC Host PCIe controller [0006.660] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(0); error=0x12 [0006.660] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0006.661] W> Failed to open NVME-0, err = 80800612 [0006.665] W> Failed to initialize device 10-0 [0006.669] E> NVME (0) boot failed, err: 0x80800612 [0006.674] I> ########## NVME (1) boot ########## [0006.678] I> Initializing nvme device instance 1 [0006.683] I> Initializing nvme controller [0006.687] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0006.693] I> vpcie3v3-supply not found [0006.697] I> vpcie12v-supply not found [0006.700] W> Failed to get nvidia,plat-gpios [0006.704] I> tegrabl_pcie_soc_preinit: (1): [0006.709] I> Unpowergate [0006.711] I> tegrabl_car_clk_disable(1) ... [0006.715] I> tegrabl_car_rst_set(CORE, 1) ... [0006.719] I> tegrabl_car_rst_set(APB, 1) ... [0006.723] I> tegrabl_car_clk_enable(1) ... [0006.727] I> tegrabl_car_rst_clear(APB, 1) ... [0006.731] I> tegrabl_set_ctrl_state(1) [0006.735] I> CLR PCIE_APB:6 [0006.738] I> tegrabl_pcie_soc_init: (1): [0006.741] I> APPL initialization ... [0006.745] I> poweron phys [0006.748] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0006.754] I> tegrabl_power_on_phy: power on phy @0x3e10000 [0006.873] I> PCIe controller-1 link is up [0006.874] I> tegra_pcie_info[1].cfg0_base = 0x30000000 [0006.874] I> tegra_pcie_info[1].cfg1_base = 0x30020000 [0006.874] I> tegra_pcie_info[1].atu_dma_base = 0x30040000 [0006.875] I> tegra_pcie_bus[1].mem = 0x30200000 [0006.875] I> Scanning busnr: 0 devfn: 0 [0006.875] I> PCIe IDs: 0x1ad210de [0006.879] I> PCIe RID_CC: 0x60400a1 [0006.882] I> Scanning busnr: 1 devfn: 0 [0006.886] I> PCIe IDs: 0x15338086 [0006.889] I> PCIe RID_CC: 0x2000003 [0006.892] I> PCI Config: I/O=0x30100000, Memory=0x30200000 [0006.897] I> MEM bar_num=0 bar=0x30200000 [0006.901] I> IO bar_num=2 bar=0x30100000 [0006.905] I> MEM bar_num=3 bar=0x30280000 [0006.909] I> Number of PCIe devices detected: 2 [0006.913] E> tegrabl_nvme_init: Failed tegrabl_pcie_get_dev(1); error=0x0 [0006.920] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0006.926] W> Failed to open NVME-1, err = 80800612 [0006.931] W> Failed to initialize device 10-1 [0006.935] E> NVME (1) boot failed, err: 0x80800612 [0006.940] I> ########## NVME (2) boot ########## [0006.944] I> Initializing nvme device instance 2 [0006.949] I> Initializing nvme controller [0006.953] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0006.959] I> vpcie3v3-supply not found [0006.963] I> vpcie12v-supply not found [0006.966] W> Failed to get nvidia,plat-gpios [0006.970] I> tegrabl_pcie_soc_preinit: (2): [0006.974] I> Unpowergate [0006.977] I> tegrabl_car_clk_disable(2) ... [0006.981] I> tegrabl_car_rst_set(CORE, 2) ... [0006.985] I> tegrabl_car_rst_set(APB, 2) ... [0006.989] I> tegrabl_car_clk_enable(2) ... [0006.993] I> tegrabl_car_rst_clear(APB, 2) ... [0006.997] I> tegrabl_set_ctrl_state(2) [0007.001] I> CLR PCIE_APB:6 [0007.004] I> tegrabl_pcie_soc_init: (2): [0007.007] I> APPL initialization ... [0007.011] I> poweron phys [0007.013] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0007.019] I> tegrabl_power_on_phy: controller 2 not available [0007.025] E> Failed to power on phy on controller-2 [0007.030] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0007.035] I> Failed to initialize SoC Host PCIe controller [0007.040] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(2); error=0x1 [0007.046] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0007.053] W> Failed to open NVME-2, err = 80800601 [0007.058] W> Failed to initialize device 10-2 [0007.062] E> NVME (2) boot failed, err: 0x80800601 [0007.066] I> ########## NVME (3) boot ########## [0007.071] I> Initializing nvme device instance 3 [0007.075] I> Initializing nvme controller [0007.080] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0007.086] I> vpcie3v3-supply not found [0007.089] I> vpcie12v-supply not found [0007.093] W> Failed to get nvidia,plat-gpios [0007.097] I> tegrabl_pcie_soc_preinit: (3): [0007.101] I> Unpowergate [0007.103] I> tegrabl_car_clk_disable(3) ... [0007.107] I> tegrabl_car_rst_set(CORE, 3) ... [0007.112] I> tegrabl_car_rst_set(APB, 3) ... [0007.116] I> tegrabl_car_clk_enable(3) ... [0007.120] I> tegrabl_car_rst_clear(APB, 3) ... [0007.124] I> tegrabl_set_ctrl_state(3) [0007.127] I> CLR PCIE_APB:6 [0007.130] I> tegrabl_pcie_soc_init: (3): [0007.134] I> APPL initialization ... [0007.137] I> poweron phys [0007.140] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0007.146] I> tegrabl_power_on_phy: power on phy @0x3e80000 [0008.251] C> Failed to link up controller-3 [0008.252] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0008.253] I> Failed to initialize SoC Host PCIe controller [0008.253] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(3); error=0x12 [0008.253] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0008.254] W> Failed to open NVME-3, err = 80800612 [0008.258] W> Failed to initialize device 10-3 [0008.263] E> NVME (3) boot failed, err: 0x80800612 [0008.267] I> ########## NVME (4) boot ########## [0008.272] I> Initializing nvme device instance 4 [0008.276] I> Initializing nvme controller [0008.281] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0008.286] I> vpcie3v3-supply not found [0008.290] I> vpcie12v-supply not found [0008.294] W> Failed to get nvidia,plat-gpios [0008.298] I> tegrabl_pcie_soc_preinit: (4): [0008.302] I> Unpowergate [0008.304] I> tegrabl_car_clk_disable(4) ... [0008.308] I> tegrabl_car_rst_set(CORE, 4) ... [0008.312] I> tegrabl_car_rst_set(APB, 4) ... [0008.317] I> tegrabl_car_clk_enable(4) ... [0008.320] I> tegrabl_car_rst_clear(APB, 4) ... [0008.325] I> tegrabl_set_ctrl_state(4) [0008.328] I> CLR PCIE_APB:6 [0008.331] I> tegrabl_pcie_soc_init: (4): [0008.335] I> APPL initialization ... [0008.338] I> poweron phys [0008.341] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0008.347] I> tegrabl_power_on_phy: controller 4 not available [0008.353] E> Failed to power on phy on controller-4 [0008.358] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0008.362] I> Failed to initialize SoC Host PCIe controller [0008.368] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(4); error=0x1 [0008.374] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0008.380] W> Failed to open NVME-4, err = 80800601 [0008.385] W> Failed to initialize device 10-4 [0008.389] E> NVME (4) boot failed, err: 0x80800601 [0008.394] I> ########## NVME (5) boot ########## [0008.398] I> Initializing nvme device instance 5 [0008.403] I> Initializing nvme controller [0008.407] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0008.413] I> vpcie3v3-supply not found [0008.417] I> vpcie12v-supply not found [0008.420] W> Failed to get nvidia,plat-gpios [0008.424] I> tegrabl_pcie_soc_preinit: (5): [0008.428] I> Unpowergate [0008.431] I> tegrabl_car_clk_disable(5) ... [0008.435] I> tegrabl_car_rst_set(CORE, 5) ... [0008.439] I> tegrabl_car_rst_set(APB, 5) ... [0008.443] I> tegrabl_car_clk_enable(5) ... [0008.447] I> tegrabl_car_rst_clear(APB, 5) ... [0008.451] I> tegrabl_set_ctrl_state(5) [0008.455] I> CLR PCIE_APB:6 [0008.458] I> tegrabl_pcie_soc_init: (5): [0008.461] I> APPL initialization ... [0008.465] I> poweron phys [0008.468] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0008.474] I> tegrabl_power_on_phy: power on phy @0x3eb0000 [0008.479] I> tegrabl_power_on_phy: power on phy @0x3ec0000 [0008.484] I> tegrabl_power_on_phy: power on phy @0x3ed0000 [0008.490] I> tegrabl_power_on_phy: power on phy @0x3ee0000 [0009.595] C> Failed to link up controller-5 [0009.596] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0009.596] I> Failed to initialize SoC Host PCIe controller [0009.596] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(5); error=0x12 [0009.597] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0009.597] W> Failed to open NVME-5, err = 80800612 [0009.602] W> Failed to initialize device 10-5 [0009.606] E> NVME (5) boot failed, err: 0x80800612 [0009.611] I> ########## Fixed storage boot ########## [0009.616] I> Loading kernel-bootctrl from partition [0009.620] I> Loading partition kernel-bootctrl at 0xa42d0000 from device(0x1) [0009.634] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0009.634] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0009.648] I> Already published: 00010003 [0009.648] I> Look for boot partition [0009.649] I> Fallback: assuming 0th partition is boot partition [0009.654] I> Detect filesystem [0009.682] I> Loading extlinux.conf ... [0009.682] I> Loading extlinux.conf binary from rootfs ... [0009.682] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0009.731] I> Loading extlinux.conf sig file from rootfs ... [0009.732] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf.sig [0009.762] I> Validate extlinux.conf ... [0009.763] I> T19x: Authenticate extlinux.conf (bin_type: 54), max size 0x2000 [0009.763] I> Encryption fuse is not ON [0009.764] I> L4T boot options [0009.764] I> [1]: "primary kernel" [0009.764] I> Enter choice: [0012.765] I> Continuing with default option: 1 [0012.765] I> Loading kernel ... [0012.765] I> Loading kernel binary from rootfs ... [0012.766] I> rootfs path: /sdmmc_user/boot/Image [0013.006] I> Loading kernel sig file from rootfs ... [0013.006] I> rootfs path: /sdmmc_user/boot/Image.sig [0013.043] I> overload load_size to 34881544 (from 34881552) [0013.044] I> Validate kernel ... [0013.044] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0013.361] I> Encryption fuse is not ON [0013.393] I> Loading kernel-dtb ... [0013.393] I> No kernel-dtb binary path [0013.394] I> Continue to load from partition ... [0013.394] W> No valid slot number is found in scratch register [0013.394] W> Return default slot: _a [0013.395] I> A/B: bin_type (38) slot 0 [0013.395] I> Loading kernel-dtb from partition [0013.396] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0013.411] I> Validate kernel-dtb ... [0013.412] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0013.415] I> Encryption fuse is not ON [0013.418] I> Loading ramdisk from rootfs ... [0013.421] I> Loading ramdisk binary from rootfs ... [0013.426] I> rootfs path: /sdmmc_user/boot/initrd [0013.506] I> Loading ramdisk sig file from rootfs ... [0013.507] I> rootfs path: /sdmmc_user/boot/initrd.sig [0013.543] I> overload load_size to 7238344 (from 7238352) [0013.544] I> Validate ramdisk ... [0013.544] I> T19x: Authenticate ramdisk (bin_type: 54), max size 0x4000000 [0013.611] I> Encryption fuse is not ON [0013.624] I> Kernel hdr @0xa42d0000 [0013.624] I> Kernel dtb @0x90000000 [0013.624] I> decompressor handler not found [0013.625] I> Copying kernel image (34881544 bytes) from 0xa42d0000 to 0x8008000 0 ... [0013.635] I> Done [0013.636] I> Updated bpmp info to DTB [0013.637] I> Ramdisk: Base: 0x92000000; Size: 0x6e72c8 [0013.637] I> Updated initrd info to DTB [0013.637] W> WARN: Fail to override "console=none" in commandline [0013.638] I> Active rootfs suffix: [0013.640] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display param s [0013.647] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display param s [0013.655] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display param s [0013.662] W> No valid slot number is found in scratch register [0013.668] W> Return default slot: _a [0013.671] I> Active slot suffix: [0013.674] I> add_boot_slot_suffix: slot_suffix = [0013.679] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb earlycon=tegra _comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resi ze sdhci_tegra.en_boot_part_access=1 [0013.703] I> Updated bootarg info to DTB [0013.707] W> MAC addr invalid! [0013.710] E> Failed to get WIFI MAC address [0013.714] W> MAC addr invalid! [0013.717] E> Failed to get Bluetooth MAC address [0013.721] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:4d:35:7e [0013.728] W> "plugin-manager" doesn't exist, creating [0013.732] I> Adding /chosen/plugin-manager/cvm [0013.736] W> "chip-id" doesn't exist, creating [0013.741] I> Adding /chosen/plugin-manager/chip-id [0013.746] W> "configs" doesn't exist, creating [0013.750] I> Adding /chosen/plugin-manager/configs [0013.754] W> "ids" doesn't exist, creating [0013.758] I> Adding /chosen/plugin-manager/ids [0013.763] W> "odm-data" doesn't exist, creating [0013.767] I> Adding /chosen/plugin-manager/odm-data [0013.774] W> "memory" doesn't exist, creating [0013.776] I> [0] START: 0x80000000, END: 0xac000000 [0013.781] I> [1] START: 0xac004000, END: 0xf0ad0000 [0013.785] I> [2] START: 0xf0adc000, END: 0xf0ae0000 [0013.790] I> dram_block larger than 80000000 [0013.794] I> [3] START: 0x100000000, END: 0x880000000 [0013.799] I> added [base:0x80000000, size:0x2c000000] to /memory [0013.805] I> added [base:0xac200000, size:0x44800000] to /memory [0013.811] I> added [base:0x100000000, size:0x780000000] to /memory [0013.817] I> Updated memory info to DTB [0013.821] E> add_disp_param: failed to get display params for du=0 [0013.827] W> "reset" doesn't exist, creating [0013.831] I> Adding ecid(000000016409d0860800000005ff8100) to DT [0013.837] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0013.841] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0013.846] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0013.851] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0013.855] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0013.860] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0013.865] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0013.870] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0013.875] W> "misc-data" doesn't exist, creating [0013.879] I> Boot-device: eMMC [0013.882] I> Add boot-sdmmc to plugin-manager/misc-data [0013.887] I> Add storage-sdmmc to plugin-manager/misc-data [0013.892] W> Unknown storage device [0013.896] I> Add serial number:1423621063838 as DT property [0013.902] I> Plugin-manager override starting [0013.906] I> Disable plugin-manager status in FDT [0013.910] I> Plugin-manager override finished successfully [0013.915] I> tegrabl_load_kernel_and_dtb: Done [0013.919] E> tegrabl_display_clear: display is not initialized [0013.925] W> Boot logo display failed... [0013.929] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (root@SWDEV5) (gcc version 7.3.1 2018 0425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Lin aro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Feb 24 11:50:52 EST 2022 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 780000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible i d nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nv idia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 8194536 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlyco n=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_f irst=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 v pr_resize sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 rootfstype=ext4 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 229376 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 30124(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 byt es) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 byte s) [ 0.000000] Memory: 31925908K/33298432K available (15294K kernel code, 2960K rwdata, 7096K rodata, 8640K init, 615K bss, 618860K reserved, 753664K cma-reserv ed) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 M B) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 G B) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 K B) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009670000 ( 7168 K B) [ 0.000000] .init : 0xffffff8009670000 - 0xffffff8009ee0000 ( 8640 K B) [ 0.000000] .data : 0xffffff8009ee0000 - 0xffffff800a1c4008 ( 2961 K B) [ 0.000000] .bss : 0xffffff800a1c4008 - 0xffffff800a25deb4 ( 616 K B) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 K B) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 M B) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 G B maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf20000000 ( 512 M B actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc800000000 ( 32768 M B) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (ph ys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000006] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 43980 46511088ns [ 0.008631] Console: colour dummy device 80x25 [ 0.012428] console [tty0] enabled [ 0.015871] bootconsole [tegra_comb_uart0] disabled ▒▒▒▒Shutdown state requested 1 Rebooting system ... ▒▒ [0000.056] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.064] I> MB1 (prd-version: 1.5.1.7-t194-41334769-98030a79) [0000.069] I> Boot-mode: Coldboot [0000.072] I> Chip revision : A02P [0000.075] I> Bootrom patch version : 15 (correctly patched) [0000.081] I> ATE fuse revision : 0x200 [0000.084] I> Ram repair fuse : 0x0 [0000.087] I> Ram Code : 0x2 [0000.090] I> rst_source : 0xb [0000.092] I> rst_level : 0x1 [0000.096] I> Boot-device: eMMC [0000.111] I> sdmmc DDR50 mode [0000.115] W> No valid slot number is found in scratch register [0000.120] W> Return default slot: _a [0000.124] I> Active Boot chain : 0 [0000.127] I> Boot-device: eMMC [0000.130] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.137] I> Temperature = 35000 [0000.140] W> Skipping boost for clk: BPMP_CPU_NIC [0000.144] W> Skipping boost for clk: BPMP_APB [0000.148] W> Skipping boost for clk: AXI_CBB [0000.152] W> Skipping boost for clk: AON_CPU_NIC [0000.156] W> Skipping boost for clk: CAN1 [0000.160] W> Skipping boost for clk: CAN2 [0000.164] I> Boot-device: eMMC [0000.167] I> Boot-device: eMMC [0000.177] I> Sdmmc: HS400 mode enabled [0000.181] I> ECC region[0]: Start:0x0, End:0x0 [0000.185] I> ECC region[1]: Start:0x0, End:0x0 [0000.189] I> ECC region[2]: Start:0x0, End:0x0 [0000.193] I> ECC region[3]: Start:0x0, End:0x0 [0000.198] I> ECC region[4]: Start:0x0, End:0x0 [0000.202] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.207] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.212] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.216] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.221] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.226] E> FAILED: Thermal config [0000.234] E> FAILED: MEMIO rail config [0000.252] I> Boot-device: eMMC [0000.261] I> sdmmc bdev is already initialized [0000.334] I> MB1 done ▒▒▒▒main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ▒▒ [0000.342] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-938a8cd8) [0000.343] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.343] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.344] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.350] W> device prod register failed [0000.354] I> Boot-device: eMMC [0000.357] I> Boot_device: SDMMC_BOOT instance: 3 [0000.362] I> sdmmc-3 params source = boot args [0000.365] I> sdmmc bdev is already initialized [0000.370] I> sdmmc-3 params source = boot args [0000.378] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.385] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.386] W> No valid slot number is found in scratch register [0000.390] W> Return default slot: _a [0000.394] I> Active Boot chain : 0 [0000.398] I> parsing oem signed section of bpmp-fw header done [0000.403] I> bpmp-fw binary init read from storage [0000.408] I> oem authentication of bpmp-fw header done [0000.414] I> bpmp-fw binary done read from storage [0000.417] I> bpmp-fw: Authentication init Done [0000.422] I> parsing oem signed section of cpubl header done [0000.427] I> cpubl binary init read from storage [0000.431] I> bpmp-fw: Authentication Finalize Done [0000.436] I> oem authentication of cpubl header done [0000.441] I> cpubl binary done read from storage [0000.445] I> cpubl: Authentication init Done [0000.450] I> parsing oem signed section of rce header done [0000.455] I> rce binary init read from storage [0000.459] I> Relocating BR-BCT [0000.462] I> cpubl: Authentication Finalize Done [0000.467] I> oem authentication of rce header done [0000.471] I> rce binary done read from storage [0000.475] I> rce: Authentication init Done [0000.480] I> parsing oem signed section of ape header done [0000.485] I> ape binary init read from storage [0000.489] I> rce: Authentication Finalize Done [0000.493] I> oem authentication of ape header done [0000.498] I> ape binary done read from storage [0000.502] I> ape: Authentication init Done [0000.507] I> parsing oem signed section of tos header done [0000.511] I> tos binary init read from storage [0000.516] I> ape: Authentication Finalize Done [0000.521] I> oem authentication of tos header done [0000.525] I> tos binary done read from storage [0000.529] I> tos: Authentication init Done [0000.533] I> parsing oem signed section of bpmp-fw-dtb header done [0000.539] I> bpmp-fw-dtb binary init read from storage [0000.544] I> tos: Authentication Finalize Done [0000.550] I> oem authentication of bpmp-fw-dtb header done [0000.556] I> bpmp-fw-dtb binary done read from storage [0000.559] I> bpmp-fw-dtb: Authentication init Done [0000.563] I> parsing oem signed section of cpubl-dtb header done [0000.569] I> cpubl-dtb binary init read from storage [0000.574] I> bpmp-fw-dtb: Authentication Finalize Done [0000.612] I> oem authentication of cpubl-dtb header done [0000.613] I> cpubl-dtb binary done read from storage [0000.613] I> cpubl-dtb: Authentication init Done [0000.615] I> parsing oem signed section of eks header done [0000.616] I> eks binary init read from storage [0000.616] I> cpubl-dtb: Authentication Finalize Done [0000.617] I> oem authentication of eks header done [0000.621] I> eks binary done read from storage [0000.625] I> eks: Authentication init Done [0000.629] I> eks: Authentication Finalize Done [0000.633] I> EKB detected (length: 0x410) @ VA:0x52700400 ▒▒NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:32, Jul 26 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 315: key_mgnt_processing ....... hwkey-agent: 223: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete ▒▒ welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized ▒▒ [0001.137] I> Welcome to Cboot▒▒mrq initialized fmon_post initialized ▒▒ [0001.138] I> Cboot Version: t194-cfa2bc91 [0001.138] I> CPU-BL Params @ 0xf2820000 [0001.138] I> 0) Base:0x00000000 Size:0x00000000 [0001.142] I> 1) Base:0xf1100000 Size:0x00100000 [0001.146] I> 2) Base:0xf2000000 Size:0x00200000 [0001.151] I> 3) Base:0xf1200000 Size:0x00200000 [0001.155] I> 4) Base:0xf1000000 Size:0x00100000 ▒▒clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ▒▒[0001.160] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.239] I> 6) Base:0xf3800000 Size:0x00400000 [0001.244] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.248] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.253] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.257] I> 10) Base:0xf3000000 Size:0x00800000 [0001.261] I> 11) Base:0x40000000 Size:0x00040000 [0001.266] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.270] I> 13) Base:0x40046000 Size:0x00002000 [0001.275] I> 14) Base:0x40048000 Size:0x00002000▒▒emc_debugfs initialized dvs_debugfs initialized ▒▒ [0001.284] I> 15) Base:0xac000000 Size:0x00004000▒▒fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ▒▒ [0001.335] I> 16) Base:0x4004a000 Size:0x00002000 [0001.339] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.343] I> 18) Base:0x4004c000 Size:0x00002000 [0001.348] I> 19) Base:0xf2200000 Size:0x00600000 [0001.352] I> 20) Base:0x4004e000 Size:0x00002000 [0001.357] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.361] I> 22) Base:0x00000000 Size:0x00000000 [0001.366] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.370] I> 24) Base:0xf6000000 Size:0x02000000 [0001.375] I> 25) Base:0x40050000 Size:0x00002000 [0001.379] I> 26) Base:0x40040000 Size:0x00006000 [0001.384] I> 27) Base:0xf1800000 Size:0x00400000 [0001.388] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.393] I> 29) Base:0xf1400000 Size:0x00400000 [0001.397] I> 30) Base:0x00000000 Size:0x00000000 [0001.401] I> 31) Base:0x00000000 Size:0x00000000 [0001.406] I> 32) Base:0xf8000000 Size:0x08000000 [0001.410] I> 33) Base:0x00000000 Size:0x00000000 [0001.415] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.419] I> 35) Base:0xab000000 Size:0x01000000 [0001.424] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.428] I> 37) Base:0xf2800000 Size:0x00800000 [0001.433] I> 38) Base:0x80000000 Size:0x20000000 [0001.437] I> 39) Base:0xb0000000 Size:0x08000000 [0001.442] I> 40) Base:0x00000000 Size:0x00000000 [0001.446] I> 41) Base:0x00000000 Size:0x00000000 [0001.451] I> 42) Base:0x00000000 Size:0x00000000 [0001.455] I> 43) Base:0x00000000 Size:0x00000000 [0001.459] I> 44) Base:0x00000000 Size:0x00000000 [0001.464] I> 45) Base:0x00000000 Size:0x00000000 [0001.468] GIC-SPI Target CPU: 0 [0001.471] Interrupts Init done [0001.474] calling constructors [0001.477] initializing heap [0001.480] I> Heap: [0xa0699b80 ... 0xab000000] [0001.484] initializing threads [0001.487] initializing timers [0001.490] creating bootstrap completion thread [0001.494] top of bootstrap2() [0001.497] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.501] initializing platform [0001.504] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.510] W> device prod register failed [0001.514] I> Bl_dtb @0xaaf00000 [0001.519] W> "plugin-manager" doesn't exist, creating [0001.522] W> "ids" doesn't exist, creating [0001.526] W> "connection" doesn't exist, creating [0001.530] W> "configs" doesn't exist, creating [0001.540] E> failed to read label property for node 141652: 13 [0001.542] E> failed to read reg property for node 141740: 13 [0001.547] E> failed to read label property for node 141792: 13 [0001.552] E> failed to read label property for node 141860: 13 [0001.558] E> failed to read label property for node 141896: 13 [0001.563] E> failed to read label property for node 141932: 13 [0001.569] E> failed to read reg property for node 142000: 13 [0001.574] E> failed to read label property for node 142052: 13 [0001.581] I> Find /i2c@3160000's alias i2c0 [0001.583] I> Reading eeprom i2c=0 address=0x50 [0001.613] I> Device at /i2c@3160000:0x50 [0001.613] I> Reading eeprom i2c=0 address=0x56 [0001.614] E> I2C: slave not found in slaves. [0001.614] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0001.615] E> I2C_DEV: Failed to send register address 0x00000000. [0001.616] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0001.623] E> eeprom: Failed to read I2C slave device [0001.628] I> Eeprom read failed 0x3526070d [0001.633] I> Find /i2c@3180000's alias i2c2 [0001.636] I> Reading eeprom i2c=2 address=0x54 [0001.641] E> I2C: slave not found in slaves. [0001.644] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.652] E> I2C_DEV: Failed to send register address 0x00000000. [0001.658] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.667] E> eeprom: Failed to read I2C slave device [0001.672] I> Eeprom read failed 0x3526070d [0001.676] I> Reading eeprom i2c=2 address=0x57 [0001.680] E> I2C: slave not found in slaves. [0001.684] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.692] E> I2C_DEV: Failed to send register address 0x00000000. [0001.698] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.707] E> eeprom: Failed to read I2C slave device [0001.712] I> Eeprom read failed 0x3526070d [0001.716] I> Reading eeprom i2c=2 address=0x52 [0001.720] E> I2C: slave not found in slaves. [0001.724] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.732] E> I2C_DEV: Failed to send register address 0x00000000. [0001.738] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.747] E> eeprom: Failed to read I2C slave device [0001.752] I> Eeprom read failed 0x3526070d [0001.757] I> Find /i2c@c240000's alias i2c1 [0001.760] I> Reading eeprom i2c=1 address=0x52 [0001.766] E> I2C: slave not found in slaves. [0001.769] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.776] E> I2C_DEV: Failed to send register address 0x00000000. [0001.782] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.791] E> eeprom: Retry to read I2C slave device. [0001.796] E> I2C: slave not found in slaves. [0001.800] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.808] E> I2C_DEV: Failed to send register address 0x00000000. [0001.814] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.823] E> eeprom: Failed to read I2C slave device [0001.828] I> Eeprom read failed 0x3526070d [0001.832] I> Reading eeprom i2c=1 address=0x50 [0001.836] E> I2C: slave not found in slaves. [0001.840] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.848] E> I2C_DEV: Failed to send register address 0x00000000. [0001.854] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.863] E> eeprom: Retry to read I2C slave device. [0001.868] E> I2C: slave not found in slaves. [0001.872] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.880] E> I2C_DEV: Failed to send register address 0x00000000. [0001.886] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.895] E> eeprom: Failed to read I2C slave device [0001.900] I> Eeprom read failed 0x3526070d [0001.904] I> create_pm_ids: id: 2888-0004-400-P, len: 15 [0001.909] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.920] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0001.928] W> "i2c@3160000" doesn't exist, creating [0001.932] W> "module@0x50" doesn't exist, creating [0001.938] I> Adding plugin-manager/cvm [0001.940] W> "chip-id" doesn't exist, creating [0001.944] I> Adding plugin-manager/chip-id/A02P [0001.949] I> Plugin-manager override starting [0001.954] I> Disable plugin-manager status in FDT [0001.957] I> Plugin-manager override finished successfully [0001.963] I> gpio framework initialized [0001.968] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0001.975] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0001.982] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0001.988] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.996] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.003] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.009] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.016] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.024] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.031] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.038] I> fixed regulator driver initialized [0002.047] I> register 'maxim' power off handle [0002.047] I> virtual i2c enabled [0002.049] I> registered 'maxim,max20024' pmic [0002.053] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.060] I> Boot-device: eMMC [0002.063] I> Boot_device: SDMMC_BOOT instance: 3 [0002.071] I> sdmmc-3 params source = boot args [0002.072] I> create_pm_ids: id: 2888-0004-400-P, len: 15 [0002.077] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.088] I> sdmmc bdev is already initialized [0002.092] I> sdmmc-3 params source = boot args [0002.123] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.135] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.141] E> no regulator info present for avdd_hdmi-supply [0002.142] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.145] E> no regulator info present for avdd_hdmi-supply [0002.146] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.147] E> cannot find any other nvdisp nodes [0002.147] E> no valid display unit config found in dtb [0002.150] W> display init failed [0002.152] I> Load in CBoot Boot Options partition and parse it [0002.164] E> Error -9 when finding node with path /boot-configuration [0002.164] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.171] I> Using default boot order [0002.175] I> boot-dev-order :- [0002.178] I> 1.sd [0002.179] I> 2.usb [0002.181] I> 3.nvme [0002.183] I> 4.emmc [0002.185] I> 5.net [0002.187] I> Hit any key to stop autoboot: 4 3 2 1 [0004.195] initializing target [0004.195] calling apps_init() [0004.196] starting app kernel_boot_app [0004.215] I> found decompressor handler: lz4-legacy [0004.216] I> decompressing BMP blob ... [0004.227] I> Kernel type = Normal [0004.227] I> ########## SD (0) boot ########## [0004.228] I> No sdcard [0004.228] I> -0 params source = [0004.228] E> Blockdev open: exit error [0004.228] E> SD boot failed, err: 724238353 [0004.229] I> ########## USB (0) boot ########## [0004.234] W> No valid slot number is found in scratch register [0004.234] W> Return default slot: _a [0004.242] I> Validate XUSB-FW ... [0004.242] I> T19x: Authenticate XUSB-FW (bin_type: 11), max size 0x28000 [0004.246] I> Encryption fuse is not ON [0004.249] I> USB Firmware Version: 60.09 release [0004.309] I> enabling 'vdd-5v-sata' regulator [0004.313] I> regulator of usb2-1 already enabled [0004.317] I> regulator of usb2-2 already enabled [0004.321] I> regulator of usb2-3 already enabled [0005.324] E> failed to initialize xhci controller [0005.325] E> Error in init of XUSB host driver, err: 79790026 [0005.325] W> Failed to initialize device 5-0 [0005.326] E> USB boot failed, err: 2037973030 [0005.326] I> ########## NVME (0) boot ########## [0005.326] I> Initializing nvme device instance 0 [0005.327] I> Initializing nvme controller [0005.331] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0005.337] I> vpcie3v3-supply not found [0005.341] I> vpcie12v-supply not found [0005.344] W> Failed to get nvidia,plat-gpios [0005.348] I> tegrabl_pcie_soc_preinit: (0): [0005.352] I> Unpowergate [0005.355] I> tegrabl_car_clk_disable(0) ... [0005.359] I> tegrabl_car_rst_set(CORE, 0) ... [0005.363] I> tegrabl_car_rst_set(APB, 0) ... [0005.367] I> tegrabl_car_clk_enable(0) ... [0005.371] I> tegrabl_car_rst_clear(APB, 0) ... [0005.375] I> tegrabl_set_ctrl_state(0) [0005.379] I> CLR PCIE_APB:6 [0005.382] I> tegrabl_pcie_soc_init: (0): [0005.385] I> APPL initialization ... [0005.389] I> poweron phys [0005.391] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0005.398] I> tegrabl_power_on_phy: power on phy @0x3e30000 [0005.403] I> tegrabl_power_on_phy: power on phy @0x3e40000 [0005.408] I> tegrabl_power_on_phy: power on phy @0x3e50000 [0005.414] I> tegrabl_power_on_phy: power on phy @0x3e60000 [0006.519] C> Failed to link up controller-0 [0006.520] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0006.520] I> Failed to initialize SoC Host PCIe controller [0006.520] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(0); error=0x12 [0006.521] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0006.521] W> Failed to open NVME-0, err = 80800612 [0006.526] W> Failed to initialize device 10-0 [0006.530] E> NVME (0) boot failed, err: 0x80800612 [0006.535] I> ########## NVME (1) boot ########## [0006.539] I> Initializing nvme device instance 1 [0006.544] I> Initializing nvme controller [0006.548] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0006.554] I> vpcie3v3-supply not found [0006.558] I> vpcie12v-supply not found [0006.561] W> Failed to get nvidia,plat-gpios [0006.565] I> tegrabl_pcie_soc_preinit: (1): [0006.569] I> Unpowergate [0006.572] I> tegrabl_car_clk_disable(1) ... [0006.576] I> tegrabl_car_rst_set(CORE, 1) ... [0006.580] I> tegrabl_car_rst_set(APB, 1) ... [0006.584] I> tegrabl_car_clk_enable(1) ... [0006.588] I> tegrabl_car_rst_clear(APB, 1) ... [0006.592] I> tegrabl_set_ctrl_state(1) [0006.596] I> CLR PCIE_APB:6 [0006.599] I> tegrabl_pcie_soc_init: (1): [0006.602] I> APPL initialization ... [0006.606] I> poweron phys [0006.608] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0006.615] I> tegrabl_power_on_phy: power on phy @0x3e10000 [0006.734] I> PCIe controller-1 link is up [0006.734] I> tegra_pcie_info[1].cfg0_base = 0x30000000 [0006.735] I> tegra_pcie_info[1].cfg1_base = 0x30020000 [0006.735] I> tegra_pcie_info[1].atu_dma_base = 0x30040000 [0006.735] I> tegra_pcie_bus[1].mem = 0x30200000 [0006.736] I> Scanning busnr: 0 devfn: 0 [0006.736] I> PCIe IDs: 0x1ad210de [0006.739] I> PCIe RID_CC: 0x60400a1 [0006.742] I> Scanning busnr: 1 devfn: 0 [0006.746] I> PCIe IDs: 0x15338086 [0006.749] I> PCIe RID_CC: 0x2000003 [0006.753] I> PCI Config: I/O=0x30100000, Memory=0x30200000 [0006.758] I> MEM bar_num=0 bar=0x30200000 [0006.762] I> IO bar_num=2 bar=0x30100000 [0006.766] I> MEM bar_num=3 bar=0x30280000 [0006.769] I> Number of PCIe devices detected: 2 [0006.774] E> tegrabl_nvme_init: Failed tegrabl_pcie_get_dev(1); error=0x0 [0006.781] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0006.787] W> Failed to open NVME-1, err = 80800612 [0006.791] W> Failed to initialize device 10-1 [0006.796] E> NVME (1) boot failed, err: 0x80800612 [0006.800] I> ########## NVME (2) boot ########## [0006.805] I> Initializing nvme device instance 2 [0006.809] I> Initializing nvme controller [0006.813] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0006.819] I> vpcie3v3-supply not found [0006.823] I> vpcie12v-supply not found [0006.827] W> Failed to get nvidia,plat-gpios [0006.831] I> tegrabl_pcie_soc_preinit: (2): [0006.835] I> Unpowergate [0006.837] I> tegrabl_car_clk_disable(2) ... [0006.841] I> tegrabl_car_rst_set(CORE, 2) ... [0006.845] I> tegrabl_car_rst_set(APB, 2) ... [0006.850] I> tegrabl_car_clk_enable(2) ... [0006.854] I> tegrabl_car_rst_clear(APB, 2) ... [0006.858] I> tegrabl_set_ctrl_state(2) [0006.861] I> CLR PCIE_APB:6 [0006.864] I> tegrabl_pcie_soc_init: (2): [0006.868] I> APPL initialization ... [0006.871] I> poweron phys [0006.874] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0006.880] I> tegrabl_power_on_phy: controller 2 not available [0006.886] E> Failed to power on phy on controller-2 [0006.891] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0006.895] I> Failed to initialize SoC Host PCIe controller [0006.901] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(2); error=0x1 [0006.907] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0006.913] W> Failed to open NVME-2, err = 80800601 [0006.918] W> Failed to initialize device 10-2 [0006.922] E> NVME (2) boot failed, err: 0x80800601 [0006.927] I> ########## NVME (3) boot ########## [0006.931] I> Initializing nvme device instance 3 [0006.936] I> Initializing nvme controller [0006.940] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0006.946] I> vpcie3v3-supply not found [0006.950] I> vpcie12v-supply not found [0006.953] W> Failed to get nvidia,plat-gpios [0006.957] I> tegrabl_pcie_soc_preinit: (3): [0006.961] I> Unpowergate [0006.964] I> tegrabl_car_clk_disable(3) ... [0006.968] I> tegrabl_car_rst_set(CORE, 3) ... [0006.972] I> tegrabl_car_rst_set(APB, 3) ... [0006.976] I> tegrabl_car_clk_enable(3) ... [0006.980] I> tegrabl_car_rst_clear(APB, 3) ... [0006.984] I> tegrabl_set_ctrl_state(3) [0006.988] I> CLR PCIE_APB:6 [0006.991] I> tegrabl_pcie_soc_init: (3): [0006.994] I> APPL initialization ... [0006.998] I> poweron phys [0007.001] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0007.007] I> tegrabl_power_on_phy: power on phy @0x3e80000 [0008.112] C> Failed to link up controller-3 [0008.113] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0008.113] I> Failed to initialize SoC Host PCIe controller [0008.113] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(3); error=0x12 [0008.114] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0008.114] W> Failed to open NVME-3, err = 80800612 [0008.119] W> Failed to initialize device 10-3 [0008.123] E> NVME (3) boot failed, err: 0x80800612 [0008.128] I> ########## NVME (4) boot ########## [0008.132] I> Initializing nvme device instance 4 [0008.137] I> Initializing nvme controller [0008.141] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0008.147] I> vpcie3v3-supply not found [0008.151] I> vpcie12v-supply not found [0008.154] W> Failed to get nvidia,plat-gpios [0008.158] I> tegrabl_pcie_soc_preinit: (4): [0008.162] I> Unpowergate [0008.165] I> tegrabl_car_clk_disable(4) ... [0008.169] I> tegrabl_car_rst_set(CORE, 4) ... [0008.173] I> tegrabl_car_rst_set(APB, 4) ... [0008.177] I> tegrabl_car_clk_enable(4) ... [0008.181] I> tegrabl_car_rst_clear(APB, 4) ... [0008.185] I> tegrabl_set_ctrl_state(4) [0008.189] I> CLR PCIE_APB:6 [0008.192] I> tegrabl_pcie_soc_init: (4): [0008.195] I> APPL initialization ... [0008.199] I> poweron phys [0008.202] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0008.207] I> tegrabl_power_on_phy: controller 4 not available [0008.213] E> Failed to power on phy on controller-4 [0008.218] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0008.223] I> Failed to initialize SoC Host PCIe controller [0008.228] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(4); error=0x1 [0008.235] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0008.241] W> Failed to open NVME-4, err = 80800601 [0008.246] W> Failed to initialize device 10-4 [0008.250] E> NVME (4) boot failed, err: 0x80800601 [0008.254] I> ########## NVME (5) boot ########## [0008.259] I> Initializing nvme device instance 5 [0008.263] I> Initializing nvme controller [0008.268] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0008.274] I> vpcie3v3-supply not found [0008.277] I> vpcie12v-supply not found [0008.281] W> Failed to get nvidia,plat-gpios [0008.285] I> tegrabl_pcie_soc_preinit: (5): [0008.289] I> Unpowergate [0008.292] I> tegrabl_car_clk_disable(5) ... [0008.295] I> tegrabl_car_rst_set(CORE, 5) ... [0008.300] I> tegrabl_car_rst_set(APB, 5) ... [0008.304] I> tegrabl_car_clk_enable(5) ... [0008.308] I> tegrabl_car_rst_clear(APB, 5) ... [0008.312] I> tegrabl_set_ctrl_state(5) [0008.315] I> CLR PCIE_APB:6 [0008.318] I> tegrabl_pcie_soc_init: (5): [0008.322] I> APPL initialization ... [0008.325] I> poweron phys [0008.328] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0008.334] I> tegrabl_power_on_phy: power on phy @0x3eb0000 [0008.340] I> tegrabl_power_on_phy: power on phy @0x3ec0000 [0008.345] I> tegrabl_power_on_phy: power on phy @0x3ed0000 [0008.350] I> tegrabl_power_on_phy: power on phy @0x3ee0000 [0009.456] C> Failed to link up controller-5 [0009.456] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0009.457] I> Failed to initialize SoC Host PCIe controller [0009.457] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(5); error=0x12 [0009.457] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0009.458] W> Failed to open NVME-5, err = 80800612 [0009.463] W> Failed to initialize device 10-5 [0009.467] E> NVME (5) boot failed, err: 0x80800612 [0009.471] I> ########## Fixed storage boot ########## [0009.476] I> Loading kernel-bootctrl from partition [0009.481] I> Loading partition kernel-bootctrl at 0xa42d0000 from device(0x1) [0009.494] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0009.495] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0009.508] I> Already published: 00010003 [0009.508] I> Look for boot partition [0009.509] I> Fallback: assuming 0th partition is boot partition [0009.515] I> Detect filesystem [0009.542] I> Loading extlinux.conf ... [0009.542] I> Loading extlinux.conf binary from rootfs ... [0009.543] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0009.592] I> Loading extlinux.conf sig file from rootfs ... [0009.592] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf.sig [0009.623] I> Validate extlinux.conf ... [0009.623] I> T19x: Authenticate extlinux.conf (bin_type: 54), max size 0x2000 [0009.624] I> Encryption fuse is not ON [0009.624] I> L4T boot options [0009.624] I> [1]: "primary kernel" [0009.625] I> Enter choice: [0012.626] I> Continuing with default option: 1 [0012.626] I> Loading kernel ... [0012.626] I> Loading kernel binary from rootfs ... [0012.627] I> rootfs path: /sdmmc_user/boot/Image [0012.867] I> Loading kernel sig file from rootfs ... [0012.868] I> rootfs path: /sdmmc_user/boot/Image.sig [0012.904] I> overload load_size to 34881544 (from 34881552) [0012.905] I> Validate kernel ... [0012.905] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0013.223] I> Encryption fuse is not ON [0013.237] I> Loading kernel-dtb ... [0013.238] I> No kernel-dtb binary path [0013.238] I> Continue to load from partition ... [0013.238] W> No valid slot number is found in scratch register [0013.239] W> Return default slot: _a [0013.239] I> A/B: bin_type (38) slot 0 [0013.239] I> Loading kernel-dtb from partition [0013.241] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0013.255] I> Validate kernel-dtb ... [0013.255] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0013.259] I> Encryption fuse is not ON [0013.262] I> Loading ramdisk from rootfs ... [0013.265] I> Loading ramdisk binary from rootfs ... [0013.270] I> rootfs path: /sdmmc_user/boot/initrd [0013.351] I> Loading ramdisk sig file from rootfs ... [0013.351] I> rootfs path: /sdmmc_user/boot/initrd.sig [0013.388] I> overload load_size to 7238344 (from 7238352) [0013.388] I> Validate ramdisk ... [0013.388] I> T19x: Authenticate ramdisk (bin_type: 54), max size 0x4000000 [0013.455] I> Encryption fuse is not ON [0013.461] I> Kernel hdr @0xa42d0000 [0013.462] I> Kernel dtb @0x90000000 [0013.462] I> decompressor handler not found [0013.462] I> Copying kernel image (34881544 bytes) from 0xa42d0000 to 0x80080000 ... [0013.469] I> Done [0013.469] I> Updated bpmp info to DTB [0013.470] I> Ramdisk: Base: 0x92000000; Size: 0x6e72c8 [0013.471] I> Updated initrd info to DTB [0013.471] W> WARN: Fail to override "console=none" in commandline [0013.475] I> Active rootfs suffix: [0013.478] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0013.485] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0013.492] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0013.500] W> No valid slot number is found in scratch register [0013.505] W> Return default slot: _a [0013.509] I> Active slot suffix: [0013.512] I> add_boot_slot_suffix: slot_suffix = [0013.516] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0013.541] I> Updated bootarg info to DTB [0013.545] W> MAC addr invalid! [0013.548] E> Failed to get WIFI MAC address [0013.552] W> MAC addr invalid! [0013.554] E> Failed to get Bluetooth MAC address [0013.559] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:4d:35:7e [0013.565] W> "plugin-manager" doesn't exist, creating [0013.570] I> Adding /chosen/plugin-manager/cvm [0013.574] W> "chip-id" doesn't exist, creating [0013.578] I> Adding /chosen/plugin-manager/chip-id [0013.583] W> "configs" doesn't exist, creating [0013.587] I> Adding /chosen/plugin-manager/configs [0013.592] W> "ids" doesn't exist, creating [0013.596] I> Adding /chosen/plugin-manager/ids [0013.600] W> "odm-data" doesn't exist, creating [0013.605] I> Adding /chosen/plugin-manager/odm-data [0013.611] W> "memory" doesn't exist, creating [0013.614] I> [0] START: 0x80000000, END: 0xac000000 [0013.618] I> [1] START: 0xac004000, END: 0xf0ad0000 [0013.623] I> [2] START: 0xf0adc000, END: 0xf0ae0000 [0013.628] I> dram_block larger than 80000000 [0013.632] I> [3] START: 0x100000000, END: 0x880000000 [0013.637] I> added [base:0x80000000, size:0x2c000000] to /memory [0013.643] I> added [base:0xac200000, size:0x44800000] to /memory [0013.648] I> added [base:0x100000000, size:0x780000000] to /memory [0013.655] I> Updated memory info to DTB [0013.658] E> add_disp_param: failed to get display params for du=0 [0013.664] W> "reset" doesn't exist, creating [0013.669] I> Adding ecid(000000016409d0860800000005ff8100) to DT [0013.674] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0013.679] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0013.684] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0013.688] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0013.693] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0013.698] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0013.702] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0013.707] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0013.713] W> "misc-data" doesn't exist, creating [0013.716] I> Boot-device: eMMC [0013.719] I> Add boot-sdmmc to plugin-manager/misc-data [0013.724] I> Add storage-sdmmc to plugin-manager/misc-data [0013.730] W> Unknown storage device [0013.733] I> Add serial number:1423621063838 as DT property [0013.739] I> Plugin-manager override starting [0013.743] I> Disable plugin-manager status in FDT [0013.747] I> Plugin-manager override finished successfully [0013.753] I> tegrabl_load_kernel_and_dtb: Done [0013.757] E> tegrabl_display_clear: display is not initialized [0013.762] W> Boot logo display failed... [0013.766] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (root@SWDEV5) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Feb 24 11:50:52 EST 2022 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 780000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8194536 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 rootfstype=ext4 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 229376 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 30124(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Memory: 31925908K/33298432K available (15294K kernel code, 2960K rwdata, 7096K rodata, 8640K init, 615K bss, 618860K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009670000 ( 7168 KB) [ 0.000000] .init : 0xffffff8009670000 - 0xffffff8009ee0000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009ee0000 - 0xffffff800a1c4008 ( 2961 KB) [ 0.000000] .bss : 0xffffff800a1c4008 - 0xffffff800a25deb4 ( 616 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf20000000 ( 512 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc800000000 ( 32768 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000006] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.008286] Console: colour dummy device 80x25 [ 0.012179] console [tty0] enabled [ 0.015864] bootconsole [tegra_comb_uart0] disabled