[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-4164) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Apr 8 18:10:49 PDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00800000@92cb4000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefb1000 s61656 r8192 d32552 u102400 [ 0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 tegra_fbmem=0x800000@0x92cb4000 is_hdmi_initialised=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29392(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3562148K/4159488K available (15294K kernel code, 2934K rwdata, 6636K rodata, 8576K init, 609K bss, 122204K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff80095f0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095f0000 - 0xffffff8009e50000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e50000 - 0xffffff800a12d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a12d808 - 0xffffff800a1c5f3c ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001734] Console: colour dummy device 80x25 [ 0.001753] console [tty0] enabled [ 0.001772] kmemleak: Kernel memory leak detector disabled [ 0.001791] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001805] pid_max: default: 32768 minimum: 301 [ 0.002256] Security Framework initialized [ 0.002483] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002491] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003647] ftrace: allocating 47094 entries in 184 pages [ 0.175324] sched-energy: CPU device node has no sched-energy-costs [ 0.175359] ASID allocator initialised with 65536 entries [ 0.212297] tegra-id: chipid=22117. [ 0.212310] tegra-id: opt_subrevision=0. [ 0.212327] Tegra Speedo/IDDQ fuse revision 4 [ 0.212332] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.212335] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.212342] Tegra: CPU Speedo Value 1994, SoC Speedo Value 1867, GPU Speedo Value 1987 [ 0.212345] Tegra: CPU IDDQ Value 1412, SoC IDDQ Value 1544, GPU IDDQ Value 1865 [ 0.212365] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.212382] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts [ 0.212391] DTB Build time: Apr 8 2020 18:15:57 [ 0.261105] CPU1: Booted secondary processor [411fd071] [ 0.292993] CPU2: Booted secondary processor [411fd071] [ 0.324978] CPU3: Booted secondary processor [411fd071] [ 0.325064] Brought up 4 CPUs [ 0.325073] SMP: Total of 4 processors activated. [ 0.325080] CPU features: detected feature: 32-bit EL0 Support [ 0.325345] CPU: All CPU(s) started at EL2 [ 0.325362] alternatives: patching kernel code [ 0.333772] devtmpfs: initialized [ 0.370879] Initilizing CustomIPI irq domain [ 0.371285] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.371308] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.382818] pinctrl core: initialized pinctrl subsystem [ 0.383475] OS set in device tree is not L4T. [ 0.383915] regulator-dummy: no parameters [ 0.384201] Initializing plugin-manager [ 0.384313] Plugin module not found [ 0.384558] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [ 0.385190] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [ 0.386079] node /plugin-manager/fragment@5 match with board 3449-0000-200 [ 0.387089] node /plugin-manager/fragement@9 match with board <3448-0000-300 [ 0.391961] NET: Registered protocol family 16 [ 0.393546] pstore: using zlib compression [ 0.393581] console [pstore-1] enabled [ 0.393586] pstore: Registered ramoops as persistent store backend [ 0.393592] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.409121] cpuidle: using governor menu [ 0.413523] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.415254] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e54000) [ 0.415276] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.417723] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.419958] Serial: AMBA PL011 UART driver [ 0.420476] tegra_powergate_init: DONE [ 0.420493] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts [ 0.420499] DTB Build time: Apr 8 2020 18:15:57 [ 0.422500] Tegra reboot handler registered. [ 0.427113] iommu: Adding device tegra-carveouts to group 0 [ 0.427255] platform tegra-carveouts: domain=ffffffc0f9b963d8 allocates as[0]=ffffffc0f94080a8 [ 0.427611] iommu: Adding device smmu_test to group 1 [ 0.427661] platform smmu_test: domain=ffffffc0f9b96618 allocates as[0]=ffffffc0f9408110 [ 0.428465] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.428523] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.428579] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.428589] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.428611] mc-err: mcerr ops are set to t21x [ 0.438231] iommu: Adding device 70090000.xusb to group 2 [ 0.438539] iommu: Adding device 70006000.serial to group 3 [ 0.438599] platform 70006000.serial: domain=ffffffc0f9448cd8 allocates as[0]=ffffffc0f9408178 [ 0.439030] iommu: Adding device 70006040.serial to group 4 [ 0.439287] iommu: Adding device 70006200.serial to group 5 [ 0.439475] iommu: Adding device sound to group 6 [ 0.439524] platform sound: domain=ffffffc0f94b7258 allocates as[0]=ffffffc0f94081e0 [ 0.440074] iommu: Adding device 7000d400.spi to group 7 [ 0.440335] iommu: Adding device 7000d600.spi to group 8 [ 0.440643] iommu: Adding device 70410000.spi to group 9 [ 0.440952] iommu: Adding device 50000000.host1x to group 10 [ 0.441280] iommu: Adding device 54080000.vi to group 11 [ 0.441679] iommu: Adding device 54600000.isp to group 12 [ 0.441934] iommu: Adding device 54680000.isp to group 13 [ 0.442216] iommu: Adding device tegradc.0 to group 14 [ 0.442269] platform tegradc.0: domain=ffffffc0f94c3198 allocates as[0]=ffffffc0f9408248 [ 0.446452] platform tegradc.0: IOVA linear map 0x0000000092cb4000(800000) [ 0.446856] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.447184] iommu: Adding device tegradc.1 to group 15 [ 0.447229] platform tegradc.1: domain=ffffffc0f94c33d8 allocates as[0]=ffffffc0f94082b0 [ 0.451380] platform tegradc.1: IOVA linear map 0x0000000092cb4000(800000) [ 0.451769] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.452055] iommu: Adding device 54340000.vic to group 16 [ 0.452254] iommu: Adding device 544c0000.nvenc to group 17 [ 0.452448] iommu: Adding device 54500000.tsec to group 18 [ 0.452640] iommu: Adding device 54100000.tsecb to group 19 [ 0.452855] iommu: Adding device 54480000.nvdec to group 20 [ 0.453047] iommu: Adding device 54380000.nvjpg to group 21 [ 0.454132] iommu: Adding device 546c0000.i2c to group 22 [ 0.454460] iommu: Adding device 57000000.gpu to group 23 [ 0.454518] platform 57000000.gpu: domain=ffffffc0f956b3d8 allocates as[0]=ffffffc0f9408318 [ 0.454578] platform 57000000.gpu: domain=ffffffc0f956b3d8 allocates as[1]=ffffffc0f9408380 [ 0.454619] platform 57000000.gpu: domain=ffffffc0f956b3d8 allocates as[2]=ffffffc0f94083e8 [ 0.454652] platform 57000000.gpu: domain=ffffffc0f956b3d8 allocates as[3]=ffffffc0f9408450 [ 0.455517] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.455528] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.455540] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.455544] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.455548] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.505309] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.505317] tegra-pmc: Clear bootloader IO dpd settings [ 0.505337] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.505402] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.505700] iommu: Adding device 70012000.se to group 24 [ 0.506462] iommu: Adding device 7000c000.i2c to group 25 [ 0.506713] iommu: Adding device 7000c400.i2c to group 26 [ 0.506969] iommu: Adding device 7000c500.i2c to group 27 [ 0.507220] iommu: Adding device 7000c700.i2c to group 28 [ 0.507460] iommu: Adding device 7000d000.i2c to group 29 [ 0.507716] iommu: Adding device 7000d100.i2c to group 30 [ 0.508004] iommu: Adding device sdhci-tegra.0 to group 31 [ 0.508062] platform sdhci-tegra.0: domain=ffffffc0f957a558 allocates as[0]=ffffffc0f94084b8 [ 0.508905] iommu: Adding device 700d0000.xudc to group 32 [ 0.512103] vdd-ac-bat: 5000 mV [ 0.512457] vdd-5v0-sys: 5000 mV [ 0.513478] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.513518] vdd-5v0-hdmi: 5000 mV [ 0.513902] vdd-1v8-sys: 1800 mV [ 0.514338] vdd-fan: supplied by vdd-5v0-sys [ 0.514375] vdd-fan: 5000 mV [ 0.514753] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.514787] vdd-usb-vbus: 5000 mV [ 0.515302] vdd-usb-vbus2: 5000 mV [ 0.542063] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.544806] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.545916] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.545937] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.546331] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.554467] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.554831] SCSI subsystem initialized [ 0.555075] libata version 3.00 loaded. [ 0.555418] usbcore: registered new interface driver usbfs [ 0.555467] usbcore: registered new interface driver hub [ 0.555541] usbcore: registered new device driver usb [ 0.559563] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.564400] vdd-core: 600 <--> 1162 mV at 1125 mV [ 0.565349] random: fast init done [ 0.565365] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.568249] vdd-ddr-1v1: 1150 mV [ 0.572332] vdd-pre-reg-1v35: 1350 mV [ 0.576244] vdd-1v8: 1800 mV [ 0.580247] avdd-sys-1v2: 1200 mV [ 0.584246] vdd-pex-1v0: 1050 mV [ 0.584905] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.585459] max77620-ldo3: at 3100 mV [ 0.588250] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.588790] max77620-ldo5: at 3100 mV [ 0.589343] max77620-ldo6: at 2800 mV [ 0.592248] avdd-1v05-pll: 1050 mV [ 0.596253] avdd-io-hdmi-dp: 1050 mV [ 0.598729] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.599014] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.599305] max77620 4-003c: max77620 probe successful [ 0.602101] media: Linux media interface: v0.10 [ 0.602155] Linux video capture interface: v2.00 [ 0.603054] pps_core: LinuxPPS API ver. 1 registered [ 0.603061] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.603090] PTP clock support registered [ 0.606408] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.607245] Advanced Linux Sound Architecture Driver Initialized. [ 0.607925] Bluetooth: Core ver 2.22 [ 0.607971] NET: Registered protocol family 31 [ 0.607975] Bluetooth: HCI device and connection manager initialized [ 0.607990] Bluetooth: HCI socket layer initialized [ 0.607998] Bluetooth: L2CAP socket layer initialized [ 0.608032] Bluetooth: SCO socket layer initialized [ 0.609772] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.609789] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.609835] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.609849] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.613295] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.614591] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.614652] vdd-3v3-sys: 3300 mV [ 0.614939] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.617084] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.617554] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.617590] vdd-3v3-sd: 3300 mV [ 0.618423] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.618489] avdd-io-edp-1v05: 1050 mV [ 0.618963] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.618999] vdd-usb-hub-en: 5000 mV [ 0.620304] camchar: rtcpu character device driver loaded [ 0.621236] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.622656] clocksource: Switched to clocksource arch_sys_counter [ 0.664432] VFS: Disk quotas dquot_6.6.0 [ 0.664594] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.665105] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.665548] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.665568] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.665776] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.665783] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.665795] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.665826] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.665833] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.665850] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.665858] nvmap_page_pool_init: Total RAM pages: 1009321 [ 0.665863] nvmap_page_pool_init: nvmap page pool size: 126165 pages (492 MB) [ 0.665953] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.666407] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.667388] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.676041] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.676464] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.676756] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.676973] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.677148] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.677432] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.677436] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.677892] NET: Registered protocol family 2 [ 0.678992] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.679204] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.679745] TCP: Hash tables configured (established 32768 bind 32768) [ 0.679899] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.679980] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.680434] NET: Registered protocol family 1 [ 0.681144] RPC: Registered named UNIX socket transport module. [ 0.681149] RPC: Registered udp transport module. [ 0.681153] RPC: Registered tcp transport module. [ 0.681157] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.681171] PCI: CLS 0 bytes, default 64 [ 0.681407] Trying to unpack rootfs image as initramfs... [ 0.916052] Freeing initrd memory: 5356K [ 0.926011] host1x 50000000.host1x: initialized [ 0.927891] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.931177] audit: initializing netlink subsys (disabled) [ 0.931252] audit: type=2000 audit(0.779:1): initialized [ 0.932021] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.942072] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.943604] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.944417] 9p: Installing v9fs 9p2000 file system support [ 0.948006] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.948164] io scheduler noop registered [ 0.948458] io scheduler cfq registered (default) [ 0.951187] gic 702f9000.agic: GIC IRQ controller registered [ 0.954143] iommu: Adding device 702ef000.adsp to group 33 [ 0.963232] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 0.963382] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.963982] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x8269c14 [ 0.963989] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.965613] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.965711] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.965836] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.966035] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 0.966122] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 0.966207] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 0.966299] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 0.966385] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 0.966473] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 0.966561] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 0.972608] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.974324] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.976268] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.977545] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.977923] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.979249] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.979486] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000 [ 0.979741] Adding domain tsec-pd to PM domain host1x-pd [ 0.982107] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 0.983095] tsec 54500000.tsec: initialized [ 0.984679] tsec 54100000.tsecb: initialized [ 0.985365] Adding domain nvdec-pd to PM domain host1x-pd [ 0.988933] nvdec 54480000.nvdec: initialized [ 0.989976] Adding domain vic03-pd to PM domain host1x-pd [ 0.990160] Adding domain msenc-pd to PM domain host1x-pd [ 0.990334] Adding domain nvjpg-pd to PM domain host1x-pd [ 0.994345] falcon 54340000.vic: initialized [ 0.995683] falcon 544c0000.nvenc: initialized [ 0.997027] falcon 54380000.nvjpg: initialized [ 1.001373] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 1.001423] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.001455] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.001490] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.001606] display board info: id 0x0, fab 0x0 [ 1.001665] generic_infoframe_type: 0x87 [ 1.001721] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.001726] tegra_cec 70015000.tegra_cec: probed [ 1.001809] tegradc tegradc.0: DT parsed successfully [ 1.001858] tegradc tegradc.0: Display dc.ffffff800ab80000 registered with id=0 [ 1.002368] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781 [ 1.009704] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.010293] tegradc tegradc.0: probed [ 1.016455] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.017975] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.017985] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.018408] kfuse 7000fc00.kfuse: initialized [ 1.020037] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.021133] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.022618] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.022697] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.023241] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.024873] vdd-gpu: applied init 1000000uV constraint [ 1.024882] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.025359] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.030393] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.030540] No Device Node present for smmu client: serial8250 !! [ 1.030562] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.030711] iommu: Adding device serial8250 to group 35 [ 1.034399] console [ttyS0] disabled [ 1.034546] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.034739] console [ttyS0] enabled [ 1.035998] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.036427] serial-tegra 70006200.serial: RX in PIO mode [ 1.036535] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.037503] [drm] Initialized [ 1.042697] Console: switching to colour frame buffer device 240x67 [ 1.042829] tegradc tegradc.0: fb registered [ 1.049229] brd: module loaded [ 1.050849] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 1.050901] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m [ 1.051457] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 1.051471] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 1.055087] loop: module loaded [ 1.055195] tegra_profiler: version: 1.141, samples/io: 48/28 [ 1.055321] tegra_profiler: auth: init [ 1.056629] THERMAL EST: found 2 subdevs [ 1.056636] THERMAL EST num_resources: 0 [ 1.056643] [THERMAL EST subdev 0] [ 1.056651] [THERMAL EST subdev 1] [ 1.057161] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.057166] THERMAL EST: thz register success. [ 1.057327] THERMAL EST: end of probe, return err: 0 [ 1.058541] sd: No Scsi addr parsed to reserve index [ 1.058581] hisi_sas: driver version v1.6 [ 1.063573] tegra-qspi 70410000.spi: Prod settings list not found [ 1.064825] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 1.064834] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 1.068299] libphy: Fixed MDIO Bus: probed [ 1.069035] tun: Universal TUN/TAP device driver, 1.6 [ 1.069039] tun: (C) 1999-2004 Max Krasnyansky [ 1.070088] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.070095] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.070152] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.070156] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.070217] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.070221] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.070277] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.070281] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.071535] PPP generic driver version 2.4.2 [ 1.071768] PPP BSD Compression module registered [ 1.071781] PPP Deflate Compression module registered [ 1.071821] PPP MPPE Compression module registered [ 1.071828] NET: Registered protocol family 24 [ 1.071902] usbcore: registered new interface driver r8152 [ 1.071954] usbcore: registered new interface driver asix [ 1.072002] usbcore: registered new interface driver ax88179_178a [ 1.072051] usbcore: registered new interface driver cdc_ether [ 1.072092] usbcore: registered new interface driver net1080 [ 1.072129] usbcore: registered new interface driver cdc_subset [ 1.072166] usbcore: registered new interface driver zaurus [ 1.072228] usbcore: registered new interface driver cdc_ncm [ 1.072419] VFIO - User Level meta-driver version: 0.3 [ 1.073716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.073744] ehci-pci: EHCI PCI platform driver [ 1.073796] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.073809] ohci-pci: OHCI PCI platform driver [ 1.073852] ohci-platform: OHCI generic platform driver [ 1.076607] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.077221] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.077830] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.077836] Extcon AUX1(HDMI) enable [ 1.078963] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.079050] tegradc tegradc.1: No lt-data, using default setting [ 1.079083] tegradc tegradc.1: No hpd-gpio in DT [ 1.079120] tegradc tegradc.1: DT parsed successfully [ 1.079178] tegradc tegradc.1: Display dc.ffffff800d500000 registered with id=1 [ 1.079755] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f96e9800 id [ 1.081249] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.081501] usbcore: registered new interface driver uas [ 1.081572] usbcore: registered new interface driver usb-storage [ 1.081702] usbcore: registered new interface driver usbserial [ 1.085989] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.087443] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.087462] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.088018] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 1.088095] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.088122] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.088921] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.088987] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.089235] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.089509] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.089585] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.089593] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.089598] usb usb1: Product: xHCI Host Controller [ 1.089603] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.089608] usb usb1: SerialNumber: 70090000.xusb [ 1.093252] hub 1-0:1.0: USB hub found [ 1.093315] mousedev: PS/2 mouse device common for all mice [ 1.093435] usbcore: registered new interface driver xpad [ 1.093696] tegradc tegradc.1: probed [ 1.093786] hub 1-0:1.0: 5 ports detected [ 1.094026] tegradc tegradc.1: fb registered [ 1.094597] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.094611] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.094778] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.094891] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.094898] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.094903] usb usb2: Product: xHCI Host Controller [ 1.094908] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.094912] usb usb2: SerialNumber: 70090000.xusb [ 1.103000] hub 2-0:1.0: USB hub found [ 1.103037] hub 2-0:1.0: 4 ports detected [ 1.111380] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244 [ 1.113748] tegradc tegradc.1: nominal-pclk:529940000 parent:529935937 div:1.0 pclk:529935937 524640600~577634600 [ 1.116271] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.119900] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.124413] dp lt: state 0 (Reset), pending_lt_evt 1 [ 1.124417] dp lt: switching from state 0 (Reset) to state 0 (Reset) [ 1.124422] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.125638] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.125788] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1.125793] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.126038] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1.126054] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1.126069] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1.126084] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1.126091] dp lt: tx_pu: 0x20 [ 1.151109] dp lt: CR not done [ 1.151794] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.151798] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.151801] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.151804] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.151807] dp lt: CR retry [ 1.151811] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.151817] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.151836] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.151852] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.151867] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.151882] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.151889] dp lt: tx_pu: 0x60 [ 1.175116] dp lt: CR not done [ 1.175799] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.175803] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.175806] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.175809] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.175811] dp lt: CR retry [ 1.175815] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.175820] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.175839] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.175853] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.175868] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.175883] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.175890] dp lt: tx_pu: 0x60 [ 1.194725] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.199109] dp lt: CR done [ 1.199114] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1.199119] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.210140] tegradc tegradc.0: blank - powerdown [ 1.224262] dp lt: CE done [ 1.224266] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1.224319] extcon-disp-state extcon:disp-state: cable 46 state 1 [ 1.224322] Extcon AUX0(DP): enable [ 1.224324] dp_audio switch 1 [ 1.224458] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 1.224461] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 1.227401] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.229534] rtc rtc1: alarm rtc device [ 1.229546] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.229563] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.229892] i2c /dev entries driver [ 1.231606] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.247555] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 1.247557] Extcon AUX1(HDMI) disable [ 1.254821] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.254895] imx219 6-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.254922] imx219 6-0010: board setup failed [ 1.254986] imx219: probe of 6-0010 failed with error -121 [ 1.256064] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.258058] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.258063] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.258365] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.258377] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.258385] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.258522] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.258531] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.258537] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.258715] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.258723] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.258727] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.258910] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.259466] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.259511] tegra_aotag tegra-aotag: Invalid temp readout [ 1.259530] tegra_aotag tegra-aotag: Invalid temp readout [ 1.259546] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.259554] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.260315] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.260330] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.260475] tegra_aotag tegra-aotag: Invalid temp readout [ 1.260497] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.260853] parse_throttle_dt_data: Num cap clks = 6 [ 1.260857] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.260864] parse_throttle_dt_data: clk=gpu type=4 [ 1.260881] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.260900] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.260921] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.260924] parse_throttle_dt_data: clk=emc type=3 [ 1.261273] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.261362] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.261466] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.262050] FAN dev name: pwm-fan [ 1.262096] FAN:gpio request success. [ 1.262147] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.262379] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.262496] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.262502] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.262577] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.262581] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.262586] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.262590] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.262594] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.262598] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.262601] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.262605] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.262609] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.262613] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.263794] device-mapper: uevent: version 1.0.3 [ 1.264199] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.267034] tegra210-cpufreq cpufreq: probe()...completed [ 1.267718] sdhci: Secure Digital Host Controller Interface driver [ 1.267720] sdhci: Copyright(c) Pierre Ossman [ 1.267721] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.268351] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 1.268703] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 1.268828] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 1.273592] tegra-se 70012000.se: tegra_se_probe: complete [ 1.274075] hidraw: raw HID events driver (C) Jiri Kosina [ 1.275226] usbcore: registered new interface driver usbhid [ 1.275228] usbhid: USB HID core driver [ 1.275556] tegradc tegradc.0: unblank [ 1.277500] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.277674] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.279614] nvpmodel: initialized successfully [ 1.280657] usbcore: registered new interface driver snd-usb-audio [ 1.280717] No Device Node present for smmu client: snd-soc-dummy !! [ 1.280721] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.280738] iommu: Adding device snd-soc-dummy to group 36 [ 1.288235] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.302354] OPE platform probe [ 1.302438] OPE platform probe successful [ 1.302726] OPE platform probe [ 1.302804] OPE platform probe successful [ 1.314905] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 1.316555] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 1.316616] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 1.317650] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 1.317657] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.326805] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 1.326810] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 1.326943] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.327073] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.327200] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.327327] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.327450] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.327580] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.327706] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.327832] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.327956] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.328081] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.334678] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 1.339482] u32 classifier [ 1.339483] Actions configured [ 1.339562] Initializing XFRM netlink socket [ 1.340271] NET: Registered protocol family 10 [ 1.340914] NET: Registered protocol family 17 [ 1.340924] NET: Registered protocol family 15 [ 1.340994] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.341037] Bluetooth: RFCOMM socket layer initialized [ 1.341046] Bluetooth: RFCOMM ver 1.11 [ 1.341050] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.341062] Bluetooth: HIDP socket layer initialized [ 1.341081] 9pnet: Installing 9P2000 support [ 1.341115] Key type dns_resolver registered [ 1.341500] Registered cp15_barrier emulation handler [ 1.341506] Registered setend emulation handler [ 1.342577] registered taskstats version 1 [ 1.343121] Adding domain ve2-pd to PM domain host1x-pd [ 1.343379] Adding domain ve-pd to PM domain host1x-pd [ 1.344999] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.345555] isp 54600000.isp: initialized [ 1.346685] isp 54680000.isp: initialized [ 1.352462] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.352465] Extcon AUX1(HDMI) enable [ 1.352822] tegradc tegradc.0: sync windows ret = 250 [ 1.353804] tegradc tegradc.1: nominal-pclk:529941000 parent:529935937 div:1.0 pclk:529935937 524641590~577635690 [ 1.357808] last reset is due to software reset [ 1.357811] KERNEL: PMC reset status reg: 0x3 [ 1.357889] BL: PMC reset status reg: 0x3 [ 1.357891] BL: PMIC poweroff Event Recorder: 0x0 [ 1.359467] clk_cbus_recalc_rate: no gbus parent [ 1.359471] clk_cbus_round_rate: no gbus parent [ 1.359473] clk_cbus_round_rate: no gbus parent [ 1.359478] clk_cbus_recalc_rate: no gbus parent [ 1.359586] clk_cbus_recalc_rate: no gbus parent [ 1.359589] clk_cbus_round_rate: no gbus parent [ 1.359591] clk_cbus_round_rate: no gbus parent [ 1.359594] clk_cbus_recalc_rate: no gbus parent [ 1.360276] tegra_dvfs: GPU-cap: registered [ 1.360332] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.360334] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled [ 1.360336] tegra dvfs: vdd-gpu: nominal 1088mV, offset 708000uV, step 10000uV, scaling enabled [ 1.361876] tegra_dvfs: vdd-gpu-vts: registered [ 1.362230] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.362916] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.363418] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.372908] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.372914] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.372920] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1.372925] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.372930] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.372935] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 1.372938] tegradc tegradc.1: blank - powerdown [ 1.395282] tegra_rtc 7000e000.rtc: setting system clock to 2020-06-02 08:08:40 UTC (1591085320) [ 1.396342] vi 54080000.vi: vi_probe: ++ [ 1.399195] vi 54080000.vi: initialized [ 1.401201] vi 54080000.vi: subdev nvcsi--1 bound [ 1.402352] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 1.402355] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 1.402357] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.402362] dp lt: link training force disable [ 1.402363] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 1.402858] Disable partitions left on by BL [ 1.402860] disb [ 1.402910] bwmgr: missing cdev-type property [ 1.403007] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.403013] DRAM derating cdev registered. [ 1.404043] vdd-fan: disabling [ 1.404045] vdd-usb-vbus: disabling [ 1.404047] vdd-usb-vbus2: disabling [ 1.404153] ALSA device list: [ 1.404155] #0: tegra-hda at 0x70038000 irq 83 [ 1.404156] #1: tegra-snd-t210ref-mobile-rt565x [ 1.414673] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.416939] extcon-disp-state extcon:disp-state: cable 46 state 0 [ 1.416941] Extcon AUX0(DP) disable [ 1.416942] dp_audio switch 0 [ 1.417261] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.417271] tegradc tegradc.1: unblank [ 1.430656] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.449368] tegradc tegradc.1: nominal-pclk:529940000 parent:529935937 div:1.0 pclk:529935937 524640600~577634600 [ 1.450524] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.454210] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.458647] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 1.458650] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 1.458652] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.459851] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.459991] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1.459994] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.460231] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1.460243] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1.460254] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1.460265] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1.460270] dp lt: tx_pu: 0x20 [ 1.465596] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 1.465600] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.465603] usb 1-2: Product: 4-Port USB 2.1 Hub [ 1.465605] usb 1-2: Manufacturer: Generic [ 1.467623] hub 1-2:1.0: USB hub found [ 1.468753] hub 1-2:1.0: 4 ports detected [ 1.483101] dp lt: CR not done [ 1.483784] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.483785] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.483787] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.483788] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.483789] dp lt: CR retry [ 1.483791] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.483794] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.483809] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.483820] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.483832] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.483843] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.483848] dp lt: tx_pu: 0x60 [ 1.507100] dp lt: CR not done [ 1.507771] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.507772] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.507774] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.507775] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.507776] dp lt: CR retry [ 1.507778] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.507782] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.507796] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.507808] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.507819] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.507831] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.507836] dp lt: tx_pu: 0x60 [ 1.531106] dp lt: CR done [ 1.531109] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1.531112] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.539300] mmc0: hw tuning done ... [ 1.539343] mmc0: new ultra high speed SDR104 SDHC card at address 0001 [ 1.539703] mmcblk0: mmc0:0001 SD16G 29.5 GiB [ 1.545894] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 1.560218] dp lt: CE done [ 1.560221] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1.560257] extcon-disp-state extcon:disp-state: cable 46 state 1 [ 1.560259] Extcon AUX0(DP): enable [ 1.560260] dp_audio switch 1 [ 1.560528] tegradc tegradc.1: sync windows ret = 250 [ 1.560648] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.560650] Extcon HDMI: HPD enabled [ 1.560666] tegradc tegradc.0: hdmi: plugged [ 1.560705] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.560711] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.560717] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1.560722] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.560727] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.560732] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 1.560735] tegradc tegradc.1: blank - powerdown [ 1.571446] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 1.571448] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 1.571450] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.571454] dp lt: link training force disable [ 1.571456] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 1.586311] extcon-disp-state extcon:disp-state: cable 46 state 0 [ 1.586312] Extcon AUX0(DP) disable [ 1.586314] dp_audio switch 0 [ 1.586630] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.586650] tegradc tegradc.1: unblank [ 1.618691] tegradc tegradc.1: nominal-pclk:529940000 parent:529935937 div:1.0 pclk:529935937 524640600~577634600 [ 1.619860] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.623529] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.627998] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 1.628000] dp lt: switching from state 4 (link training fail/disable) to state 1 (fast link training) [ 1.628003] dp lt: state 1 (fast link training), pending_lt_evt 0 [ 1.628015] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.628026] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.628037] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.628048] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.628052] dp lt: tx_pu: 0x60 [ 1.632421] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.632448] dp lt: fast link training fail [ 1.632451] dp lt: switching from state 1 (fast link training) to state 0 (Reset) [ 1.632454] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.633658] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.633806] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1.633810] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.634049] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1.634061] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1.634074] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1.634086] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1.634091] dp lt: tx_pu: 0x20 [ 1.659116] dp lt: CR not done [ 1.659797] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.659800] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.659801] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.659803] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.659805] dp lt: CR retry [ 1.659807] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.659811] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.659828] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.659840] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.659852] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.659864] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.659868] dp lt: tx_pu: 0x60 [ 1.683160] dp lt: CR not done [ 1.683832] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.683834] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.683835] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.683837] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.683838] dp lt: CR retry [ 1.683841] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.683845] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.683862] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.683875] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.683887] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.683898] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.683903] dp lt: tx_pu: 0x60 [ 1.707184] dp lt: CR done [ 1.707187] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1.707192] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.732218] dp lt: CE done [ 1.732221] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1.732249] extcon-disp-state extcon:disp-state: cable 46 state 1 [ 1.732250] Extcon AUX0(DP): enable [ 1.732251] dp_audio switch 1 [ 1.732511] tegradc tegradc.1: sync windows ret = 250 [ 1.735765] Freeing unused kernel memory: 8576K [ 1.735926] extcon-disp-state extcon:disp-state: cable 44 state 1 [ 1.735929] Extcon DP: HPD enabled [ 1.735941] hpd: Display connected, hpd_switch 1 [ 1.735944] hpd: switching from state 2 (Check EDID) to state 4 (Enabled) [ 1.757126] Root device found: mmcblk0p1 [ 1.758157] Found dev node: /dev/mmcblk0p1 [ 1.766671] usb 1-2.1: new high-speed USB device number 3 using tegra-xusb [ 1.788129] usb 1-2.1: New USB device found, idVendor=05e3, idProduct=0608 [ 1.788136] usb 1-2.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.788140] usb 1-2.1: Product: USB2.0 Hub [ 1.789118] hub 1-2.1:1.0: USB hub found [ 1.789401] hub 1-2.1:1.0: 4 ports detected [ 1.793333] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.794101] Rootfs mounted over mmcblk0p1 [ 1.818760] Switching from initrd to actual rootfs [ 1.822403] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.874666] usb 1-2.2: new high-speed USB device number 4 using tegra-xusb [ 1.895307] usb 1-2.2: New USB device found, idVendor=214b, idProduct=7250 [ 1.895312] usb 1-2.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.895315] usb 1-2.2: Product: USB2.0 HUB [ 1.896237] hub 1-2.2:1.0: USB hub found [ 1.896336] hub 1-2.2:1.0: 4 ports detected [ 1.974674] usb 1-2.3: new high-speed USB device number 5 using tegra-xusb [ 1.996178] usb 1-2.3: New USB device found, idVendor=2109, idProduct=2211 [ 1.996185] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.996188] usb 1-2.3: Product: USB2.0 Hub [ 1.996192] usb 1-2.3: Manufacturer: VIA Labs, Inc. [ 1.997126] hub 1-2.3:1.0: USB hub found [ 1.997279] hub 1-2.3:1.0: 5 ports detected [ 2.006729] tegra_cec 70015000.tegra_cec: physical address: 10:00. [ 2.071302] tegra_cec 70015000.tegra_cec: Sent res: -113. [ 2.071306] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.077909] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.078674] usb 1-2.1.1: new high-speed USB device number 6 using tegra-xusb [ 2.090611] cgroup: cgroup2: unknown option "nsdelegate" [ 2.109755] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.110553] systemd[1]: Detected architecture arm64. [ 2.139964] systemd[1]: Set hostname to . [ 2.182665] usb 1-2.2.1: new high-speed USB device number 7 using tegra-xusb [ 2.203248] usb 1-2.2.1: New USB device found, idVendor=0bda, idProduct=8179 [ 2.203255] usb 1-2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.203258] usb 1-2.2.1: Product: 802.11n NIC [ 2.203262] usb 1-2.2.1: Manufacturer: Realtek [ 2.203265] usb 1-2.2.1: SerialNumber: 00E04C0001 [ 2.219590] usb 1-2.1.1: New USB device found, idVendor=0bda, idProduct=3036 [ 2.219595] usb 1-2.1.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.219599] usb 1-2.1.1: Product: USB Camera2 [ 2.219602] usb 1-2.1.1: Manufacturer: Generic [ 2.219604] usb 1-2.1.1: SerialNumber: 200901010001 [ 2.232437] hid-generic 0003:0BDA:3036.0001: hidraw0: USB HID v1.11 Device [Generic USB Camera2] on usb-70090000.xusb-2.1.1/input2 [ 2.232729] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.234670] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.271654] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.271663] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.286664] usb 1-2.4: new full-speed USB device number 8 using tegra-xusb [ 2.321022] usb 1-2.4: not running at top speed; connect to a high speed hub [ 2.324544] usb 1-2.4: New USB device found, idVendor=2109, idProduct=0103 [ 2.324549] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.324552] usb 1-2.4: Product: USB 2.0 BILLBOARD [ 2.324555] usb 1-2.4: Manufacturer: VIA Inc. [ 2.324558] usb 1-2.4: SerialNumber: 0000000000000001 [ 2.339708] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.339715] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.339719] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.339722] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.339726] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.339748] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.339810] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.339953] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.340053] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.340076] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.340106] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.340125] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.340255] pci 0000:01:00.0: supports D1 D2 [ 2.340258] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.350785] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.350810] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 2.350814] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.350819] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit] [ 2.350835] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit] [ 2.350850] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.350857] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.350861] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.350865] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] [ 2.351099] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.351102] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.351106] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.351193] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.351359] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.351375] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.365443] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.365526] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:cc:3f:14 from device tree [ 2.365938] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.365952] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.402661] usb 1-2.2.3: new high-speed USB device number 9 using tegra-xusb [ 2.423387] usb 1-2.2.3: New USB device found, idVendor=1a40, idProduct=0101 [ 2.423405] usb 1-2.2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.423408] usb 1-2.2.3: Product: USB 2.0 Hub [ 2.460600] hub 1-2.2.3:1.0: USB hub found [ 2.460668] hub 1-2.2.3:1.0: 4 ports detected [ 2.464322] random: systemd: uninitialized urandom read (16 bytes read) [ 2.466038] systemd[1]: Created slice System Slice. [ 2.466209] random: systemd: uninitialized urandom read (16 bytes read) [ 2.466373] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.466401] random: systemd: uninitialized urandom read (16 bytes read) [ 2.466421] systemd[1]: Reached target Swap. [ 2.466589] systemd[1]: Listening on udev Control Socket. [ 2.466737] systemd[1]: Listening on udev Kernel Socket. [ 2.582064] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.716346] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 2.718683] usb 1-2.3.1: new full-speed USB device number 10 using tegra-xusb [ 2.741552] usb 1-2.3.1: New USB device found, idVendor=12d1, idProduct=1092 [ 2.741559] usb 1-2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.741563] usb 1-2.3.1: Product: HUAWEI GLASS CV10 [ 2.741567] usb 1-2.3.1: Manufacturer: HUAWEI [ 2.741570] usb 1-2.3.1: SerialNumber: 315635563535 [ 2.748692] hid-generic 0003:12D1:1092.0002: hidraw1: USB HID v1.11 Device [HUAWEI HUAWEI GLASS CV10] on usb-70090000.xusb-2.3.1/input3 [ 2.768019] systemd-journald[1946]: Received request to flush runtime journal from PID 1 [ 2.842673] usb 1-2.2.3.3: new full-speed USB device number 11 using tegra-xusb [ 2.871324] usb 1-2.2.3.3: New USB device found, idVendor=17ef, idProduct=6047 [ 2.871331] usb 1-2.2.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.871335] usb 1-2.2.3.3: Product: ThinkPad Compact USB Keyboard with TrackPoint [ 2.871338] usb 1-2.2.3.3: Manufacturer: Lenovo [ 2.942688] usb 1-2.1.2: new high-speed USB device number 12 using tegra-xusb [ 3.081084] usb 1-2.1.2: New USB device found, idVendor=0bda, idProduct=3036 [ 3.081091] usb 1-2.1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.081095] usb 1-2.1.2: Product: USB Camera2 [ 3.081098] usb 1-2.1.2: Manufacturer: Generic [ 3.081102] usb 1-2.1.2: SerialNumber: 200901010001 [ 3.094704] usb 1-2.3.2: new high-speed USB device number 13 using tegra-xusb [ 3.110433] hid-generic 0003:0BDA:3036.0005: hidraw2: USB HID v1.11 Device [Generic USB Camera2] on usb-70090000.xusb-2.1.2/input2 [ 3.115548] usb 1-2.3.2: New USB device found, idVendor=12d1, idProduct=107e [ 3.115555] usb 1-2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.115560] usb 1-2.3.2: Product: HUAWEI GLASS HID [ 3.115563] usb 1-2.3.2: Manufacturer: HUAWEI [ 3.115573] usb 1-2.3.2: SerialNumber: 1 [ 3.165124] hid-generic 0003:12D1:107E.0006: hidraw3: USB HID v1.11 Device [HUAWEI HUAWEI GLASS HID] on usb-70090000.xusb-2.3.2/input3 [ 3.166886] input: HUAWEI HUAWEI GLASS HID as /devices/70090000.xusb/usb1/1-2/1-2.3/1-2.3.2/1-2.3.2:1.4/0003:12D1:107E.0007/input/input2 [ 3.214708] usb 1-2.2.3.4: new full-speed USB device number 14 using tegra-xusb [ 3.227418] hid-generic 0003:12D1:107E.0007: input,hidraw4: USB HID v1.11 Keyboard [HUAWEI HUAWEI GLASS HID] on usb-70090000.xusb-2.3.2/input4 [ 3.237311] usb 1-2.2.3.4: New USB device found, idVendor=046d, idProduct=c084 [ 3.237318] usb 1-2.2.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.237322] usb 1-2.2.3.4: Product: G102 Prodigy Gaming Mouse [ 3.237325] usb 1-2.2.3.4: Manufacturer: Logitech [ 3.237328] usb 1-2.2.3.4: SerialNumber: 156338733338 [ 3.252371] input: Logitech G102 Prodigy Gaming Mouse as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3.4/1-2.2.3.4:1.0/0003:046D:C084.0008/input/input3 [ 3.252909] hid-generic 0003:046D:C084.0008: input,hidraw5: USB HID v1.11 Mouse [Logitech G102 Prodigy Gaming Mouse] on usb-70090000.xusb-2.2.3.4/input0 [ 3.255909] input: Logitech G102 Prodigy Gaming Mouse as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3.4/1-2.2.3.4:1.1/0003:046D:C084.0009/input/input4 [ 3.314805] usb 1-2.3.5: new high-speed USB device number 15 using tegra-xusb [ 3.315064] hid-generic 0003:046D:C084.0009: input,hidraw6: USB HID v1.11 Keyboard [Logitech G102 Prodigy Gaming Mouse] on usb-70090000.xusb-2.2.3.4/input1 [ 3.335212] usb 1-2.3.5: New USB device found, idVendor=2109, idProduct=8888 [ 3.335219] usb 1-2.3.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.341090] hid-generic 0003:2109:8888.000A: hidraw7: USB HID v1.10 Device [HID 2109:8888] on usb-70090000.xusb-2.3.5/input0 [ 3.662768] usb 1-2.1.3: new high-speed USB device number 16 using tegra-xusb [ 3.801718] usb 1-2.1.3: New USB device found, idVendor=0bda, idProduct=3036 [ 3.801724] usb 1-2.1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.801729] usb 1-2.1.3: Product: USB Camera2 [ 3.801732] usb 1-2.1.3: Manufacturer: Generic [ 3.801735] usb 1-2.1.3: SerialNumber: 200901010001 [ 3.815289] hid-generic 0003:0BDA:3036.000B: hidraw8: USB HID v1.11 Device [Generic USB Camera2] on usb-70090000.xusb-2.1.3/input2 [ 3.871796] random: crng init done [ 3.875231] random: 7 urandom warning(s) missed due to ratelimiting [ 3.896748] using random self ethernet address [ 3.901330] using random host ethernet address [ 4.366684] usb 1-2.1.4: new full-speed USB device number 17 using tegra-xusb [ 4.387881] usb 1-2.1.4: New USB device found, idVendor=0483, idProduct=df11 [ 4.387901] usb 1-2.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.387905] usb 1-2.1.4: Product: STM32 BOOTLOADER [ 4.387908] usb 1-2.1.4: Manufacturer: STMicroelectronics [ 4.387912] usb 1-2.1.4: SerialNumber: FFFFFFFEFFFF [ 5.275081] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 5.275087] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 5.603586] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 5.637935] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 5.637941] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.637945] usb 2-1: Product: 4-Port USB 3.1 Hub [ 5.637949] usb 2-1: Manufacturer: Generic [ 5.642335] hub 2-1:1.0: USB hub found [ 5.643742] hub 2-1:1.0: 4 ports detected [ 5.802683] usb 2-1: usb_suspend_both: status 0 [ 5.802835] usb usb2: usb_suspend_both: status 0 [ 6.240599] r8188eu: module is from the staging directory, the quality is unknown, you have been warned. [ 6.268561] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0) [ 6.283068] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3.3/1-2.2.3.3:1.0/0003:17EF:6047.0003/input/input5 [ 6.289953] uvcvideo: Found UVC 1.00 device USB Camera2 (0bda:3036) [ 6.314052] usbcore: registered new interface driver r8188eu [ 6.350327] lenovo 0003:17EF:6047.0003: input,hidraw9: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-70090000.xusb-2.2.3.3/input0 [ 6.351502] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3.3/1-2.2.3.3:1.1/0003:17EF:6047.0004/input/input6 [ 6.415981] lenovo 0003:17EF:6047.0004: input,hidraw10: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-70090000.xusb-2.2.3.3/input1 [ 6.491478] uvcvideo 1-2.1.1:1.0: Entity type for entity Extension 4 was not initialized! [ 6.499934] uvcvideo 1-2.1.1:1.0: Entity type for entity Processing 2 was not initialized! [ 6.508673] uvcvideo 1-2.1.1:1.0: Entity type for entity Camera 1 was not initialized! [ 6.517256] input: USB Camera2 as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1.1/1-2.1.1:1.0/input/input7 [ 6.517569] uvcvideo: Found UVC 1.00 device USB Camera2 (0bda:3036) [ 6.669511] Mass Storage Function, version: 2009/09/11 [ 6.669518] LUN: removable file: (no medium) [ 6.677079] using random self ethernet address [ 6.681800] using random host ethernet address [ 6.722221] uvcvideo 1-2.1.2:1.0: Entity type for entity Extension 4 was not initialized! [ 6.806437] uvcvideo 1-2.1.2:1.0: Entity type for entity Processing 2 was not initialized! [ 6.860473] uvcvideo 1-2.1.2:1.0: Entity type for entity Camera 1 was not initialized! [ 6.870149] input: USB Camera2 as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/input/input8 [ 6.870539] uvcvideo: Found UVC 1.00 device USB Camera2 (0bda:3036) [ 7.070969] uvcvideo 1-2.1.3:1.0: Entity type for entity Extension 4 was not initialized! [ 7.079388] uvcvideo 1-2.1.3:1.0: Entity type for entity Processing 2 was not initialized! [ 7.087791] uvcvideo 1-2.1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 7.096099] input: USB Camera2 as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1.3/1-2.1.3:1.0/input/input9 [ 7.096311] usbcore: registered new interface driver uvcvideo [ 7.096314] USB Video Class driver (1.1.1) [ 7.152442] rndis0: HOST MAC ea:19:f8:43:a2:1c [ 7.152776] rndis0: MAC ea:19:f8:43:a2:1d [ 7.153254] usb0: HOST MAC ea:19:f8:43:a2:1e [ 7.153282] usb0: MAC ea:19:f8:43:a2:1f [ 7.153305] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 7.155283] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 7.155301] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 7.155329] tegra-xudc-new 700d0000.xudc: entering ELPG [ 7.155622] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 7.155653] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 7.156162] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 7.156179] tegra-xudc-new 700d0000.xudc: entering ELPG [ 7.156382] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 7.161346] l4tbr0: port 1(rndis0) entered blocking state [ 7.161351] l4tbr0: port 1(rndis0) entered disabled state [ 7.161533] device rndis0 entered promiscuous mode [ 7.166692] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 7.171330] l4tbr0: port 2(usb0) entered blocking state [ 7.171336] l4tbr0: port 2(usb0) entered disabled state [ 7.171510] device usb0 entered promiscuous mode [ 7.176473] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 8.308589] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.309717] eth0: 0xffffff800d4dc000, 00:04:4b:cc:3f:14, IRQ 407 [ 8.360494] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.450424] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.500959] zram: Added device: zram0 [ 8.501361] zram: Added device: zram1 [ 8.505712] zram: Added device: zram2 [ 8.508928] zram: Added device: zram3 [ 8.534395] zram0: detected capacity change from 0 to 518557696 [ 8.585693] Adding 506400k swap on /dev/zram0. Priority:5 extents:1 across:506400k SS [ 8.593616] zram1: detected capacity change from 0 to 518557696 [ 8.608044] Adding 506400k swap on /dev/zram1. Priority:5 extents:1 across:506400k SS [ 8.614524] zram2: detected capacity change from 0 to 518557696 [ 8.632665] Adding 506400k swap on /dev/zram2. Priority:5 extents:1 across:506400k SS [ 8.637315] zram3: detected capacity change from 0 to 518557696 [ 8.649310] Adding 506400k swap on /dev/zram3. Priority:5 extents:1 across:506400k SS [ 9.158875] usb 1-2.1.1: usb_suspend_both: status 0 [ 9.158911] usb 1-2.1.3: usb_suspend_both: status 0 [ 9.187508] MAC Address = 00:5a:39:b2:6b:08 [ 9.189807] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.267564] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.994673] usb 1-2.1.2: usb_suspend_both: status 0 [ 10.110125] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 10.110140] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 10.110151] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 10.110163] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 10.110175] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 10.110186] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 10.210317] tegradc tegradc.0: blank - powerdown [ 10.268004] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 10.268007] Extcon AUX1(HDMI) disable [ 10.288353] tegradc tegradc.0: unblank [ 10.299492] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 10.299582] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 10.300676] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 10.300683] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 10.335572] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 10.335574] Extcon AUX1(HDMI) enable [ 10.360512] tegradc tegradc.0: unblank [ 10.380593] tegradc tegradc.1: unblank [ 12.516808] R8188EU: assoc success [ 12.633595] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 14.385785] fuse init (API version 7.26) [ 14.596460] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.596471] Bluetooth: BNEP socket layer initialized [ 17.319428] tegradc tegradc.0: unblank [ 17.319475] tegradc tegradc.1: unblank [ 17.370793] tegradc tegradc.0: unblank [ 17.370841] tegradc tegradc.1: unblank [ 18.525886] tegradc tegradc.0: unblank [ 18.526088] tegradc tegradc.1: unblank [ 24.970685] usb 1-2.1.1: usb_suspend_both: status 0 [ 24.970735] usb 1-2.1.2: usb_suspend_both: status 0 [ 25.226750] usb 1-2.1.3: usb_suspend_both: status 0 [ 53.324945] usb 1-2.2.3: USB disconnect, device number 9 [ 53.324975] usb 1-2.2.3.3: USB disconnect, device number 11 [ 53.462051] usb 1-2.2.3.4: USB disconnect, device number 14 [ 174.124629] usb 1-2.2.3: new high-speed USB device number 18 using tegra-xusb [ 174.145425] usb 1-2.2.3: New USB device found, idVendor=1a40, idProduct=0101 [ 174.145431] usb 1-2.2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 174.145435] usb 1-2.2.3: Product: USB 2.0 Hub [ 174.146445] hub 1-2.2.3:1.0: USB hub found [ 174.148524] hub 1-2.2.3:1.0: 4 ports detected [ 174.464675] usb 1-2.2.3.3: new full-speed USB device number 19 using tegra-xusb [ 174.491139] usb 1-2.2.3.3: New USB device found, idVendor=17ef, idProduct=6047 [ 174.491146] usb 1-2.2.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 174.491151] usb 1-2.2.3.3: Product: ThinkPad Compact USB Keyboard with TrackPoint [ 174.491155] usb 1-2.2.3.3: Manufacturer: Lenovo [ 174.494746] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3.3/1-2.2.3.3:1.0/0003:17EF:6047.000C/input/input10 [ 174.553390] lenovo 0003:17EF:6047.000C: input,hidraw5: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-70090000.xusb-2.2.3.3/input0 [ 174.558555] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3.3/1-2.2.3.3:1.1/0003:17EF:6047.000D/input/input11 [ 174.617523] lenovo 0003:17EF:6047.000D: input,hidraw6: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-70090000.xusb-2.2.3.3/input1 [ 174.716627] usb 1-2.2.3.4: new full-speed USB device number 20 using tegra-xusb [ 174.743084] usb 1-2.2.3.4: New USB device found, idVendor=046d, idProduct=c084 [ 174.743090] usb 1-2.2.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 174.743094] usb 1-2.2.3.4: Product: G102 Prodigy Gaming Mouse [ 174.743097] usb 1-2.2.3.4: Manufacturer: Logitech [ 174.743100] usb 1-2.2.3.4: SerialNumber: 156338733338 [ 174.746656] input: Logitech G102 Prodigy Gaming Mouse as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3.4/1-2.2.3.4:1.0/0003:046D:C084.000E/input/input12 [ 174.747118] hid-generic 0003:046D:C084.000E: input,hidraw9: USB HID v1.11 Mouse [Logitech G102 Prodigy Gaming Mouse] on usb-70090000.xusb-2.2.3.4/input0 [ 174.749910] input: Logitech G102 Prodigy Gaming Mouse as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3.4/1-2.2.3.4:1.1/0003:046D:C084.000F/input/input13 [ 174.809168] hid-generic 0003:046D:C084.000F: input,hidraw10: USB HID v1.11 Keyboard [Logitech G102 Prodigy Gaming Mouse] on usb-70090000.xusb-2.2.3.4/input1 [ 190.796684] usb 1-2.2.3: USB disconnect, device number 18 [ 190.796690] usb 1-2.2.3.3: USB disconnect, device number 19 [ 190.969402] usb 1-2.2.3.4: USB disconnect, device number 20 [ 962.893224] usb 1-2.1: USB disconnect, device number 3 [ 962.893231] usb 1-2.1.1: USB disconnect, device number 6 [ 962.930548] usb 1-2.1.2: USB disconnect, device number 12 [ 962.978546] usb 1-2.1.3: USB disconnect, device number 16 [ 963.034320] usb 1-2.1.4: USB disconnect, device number 17