[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (root@build-server) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #4 SMP PREEMPT Mon Aug 17 13:45:33 CEST 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@9607d000 [ 0.000000] Found lut_mem2: 00002008@9607a000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 2053117 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 521725 pages, LIFO batch:31 [ 0.000000] Normal zone: 24008 pages used for memmap [ 0.000000] Normal zone: 1531392 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f702c000 s61656 r8192 d32552 u102400 [ 0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2020917 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29508(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7961724K/8212468K available (15230K kernel code, 2882K rwdata, 6692K rodata, 8512K init, 609K bss, 185208K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f60000 ( 15232 KB) [ 0.000000] .rodata : 0xffffff8008f60000 - 0xffffff80095f0000 ( 6720 KB) [ 0.000000] .init : 0xffffff80095f0000 - 0xffffff8009e40000 ( 8512 KB) [ 0.000000] .data : 0xffffff8009e40000 - 0xffffff800a110808 ( 2883 KB) [ 0.000000] .bss : 0xffffff800a110808 - 0xffffff800a1a8efc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.001071] Console: colour dummy device 80x25 [ 0.001076] console [tty0] enabled [ 0.001079] bootconsole [uart8250] disabled [ 0.001086] kmemleak: Kernel memory leak detector disabled [ 0.001095] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001102] pid_max: default: 32768 minimum: 301 [ 0.001405] Security Framework initialized [ 0.001559] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.001564] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002179] ftrace: allocating 46892 entries in 184 pages [ 0.125593] sched-energy: Sched-energy-costs installed from DT [ 0.125603] ASID allocator initialised with 65536 entries [ 0.161322] tegra-id: chipid=21817. [ 0.161328] tegra-id: opt_subrevision=1. [ 0.161345] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.161353] DTS File Name: /home/pkavvathas/repositories/Stereo-Vision_TX2_32.4.2/build/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.161359] DTB Build time: Aug 17 2020 14:14:09 [ 0.209575] CPU1: Booted secondary processor [4e0f0030] [ 0.241217] CPU2: Booted secondary processor [4e0f0030] [ 0.272995] CPU3: Booted secondary processor [411fd073] [ 0.304987] CPU4: Booted secondary processor [411fd073] [ 0.336978] CPU5: Booted secondary processor [411fd073] [ 0.337030] Brought up 6 CPUs [ 0.337033] SMP: Total of 6 processors activated. [ 0.337038] CPU features: detected feature: 32-bit EL0 Support [ 0.337686] CPU: All CPU(s) started at EL2 [ 0.337736] alternatives: patching kernel code [ 0.340464] devtmpfs: initialized [ 0.365434] Initilizing CustomIPI irq domain [ 0.365619] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.365628] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.366477] pinctrl core: initialized pinctrl subsystem [ 0.366675] OS set in device tree is not L4T. [ 0.366826] regulator-dummy: no parameters [ 0.366964] Initializing plugin-manager [ 0.367015] Plugin module not found [ 0.367051] Plugin-manager status disabled [ 0.368244] NET: Registered protocol family 16 [ 0.368923] pstore: using zlib compression [ 0.368935] console [pstore-1] enabled [ 0.368937] pstore: Registered ramoops as persistent store backend [ 0.368941] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.381061] cpuidle: using governor menu [ 0.382063] bpmp: waiting for handshake [ 0.382066] bpmp: handshake completed [ 0.382080] bpmp: synchronizing channels [ 0.382097] bpmp: channels synchronized [ 0.382100] bpmp: mail init ok [ 0.383666] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.383670] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.383675] arm-smmu 12000000.iommu: stage 1 translation [ 0.383678] arm-smmu 12000000.iommu: stage 2 translation [ 0.383681] arm-smmu 12000000.iommu: nested translation [ 0.383687] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.383692] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.383696] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.383701] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.383704] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.385479] vdso: 2 pages (1 code @ ffffff8008f67000, 1 data @ ffffff8009e44000) [ 0.385490] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.388147] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.389156] Registering BPMP clocks... [ 0.389238] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.389744] Serial: AMBA PL011 UART driver [ 0.390874] tegra_powergate_init: DONE [ 0.390882] DTS File Name: /home/pkavvathas/repositories/Stereo-Vision_TX2_32.4.2/build/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.390888] DTB Build time: Aug 17 2020 14:14:09 [ 0.392236] Tegra reboot handler registered. [ 0.393496] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.393563] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.393575] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.393578] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.393580] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.393732] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.393743] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.394030] iommu: Adding device 3460000.sdhci to group 0 [ 0.394664] iommu: Adding device 3400000.sdhci to group 1 [ 0.395667] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.395679] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.396087] iommu: Adding device 3160000.i2c to group 3 [ 0.396488] iommu: Adding device c240000.i2c to group 4 [ 0.396833] iommu: Adding device 3180000.i2c to group 5 [ 0.397157] iommu: Adding device 3190000.i2c to group 6 [ 0.397543] iommu: Adding device 31b0000.i2c to group 7 [ 0.397843] iommu: Adding device 31c0000.i2c to group 8 [ 0.398143] iommu: Adding device c250000.i2c to group 9 [ 0.398443] iommu: Adding device 31e0000.i2c to group 10 [ 0.399911] iommu: Adding device 3210000.spi to group 11 [ 0.400210] iommu: Adding device c260000.spi to group 12 [ 0.400518] iommu: Adding device 3240000.spi to group 13 [ 0.401201] iommu: Adding device 3100000.serial to group 14 [ 0.401509] iommu: Adding device 3110000.serial to group 15 [ 0.401801] iommu: Adding device c280000.serial to group 16 [ 0.402103] iommu: Adding device 3130000.serial to group 17 [ 0.403304] iommu: Adding device 2490000.ether_qos to group 18 [ 0.403317] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.403966] iommu: Adding device b000000.rtcpu to group 19 [ 0.405826] iommu: Adding device 13e10000.host1x to group 20 [ 0.406117] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.406395] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.406687] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.406964] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.407244] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.407539] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.407823] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.408102] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.408530] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.409159] iommu: Adding device 15700000.vi to group 30 [ 0.409478] iommu: Adding device 15600000.isp to group 31 [ 0.409904] iommu: Adding device 15200000.nvdisplay to group 32 [ 0.409996] platform 15200000.nvdisplay: OF IOVA linear map 0x9607d000 size (0x800000) [ 0.410030] platform 15200000.nvdisplay: OF IOVA linear map 0x9607a000 size (0x2008) [ 0.410469] iommu: Adding device 15210000.nvdisplay to group 33 [ 0.410554] platform 15210000.nvdisplay: OF IOVA linear map 0x9607d000 size (0x800000) [ 0.410560] arm__alloc_iova_at():136: iova alloc don't match, dh=0x000000009607d000, da=0x000000009587a000 [ 0.410583] platform 15210000.nvdisplay: OF IOVA linear map 0x9607a000 size (0x2008) [ 0.410587] arm__alloc_iova_at():136: iova alloc don't match, dh=0x000000009607a000, da=0x0000000096077000 [ 0.411037] iommu: Adding device 15340000.vic to group 34 [ 0.411241] iommu: Adding device 154c0000.nvenc to group 35 [ 0.411447] iommu: Adding device 15480000.nvdec to group 36 [ 0.411761] iommu: Adding device 15380000.nvjpg to group 37 [ 0.411959] iommu: Adding device 15500000.tsec to group 38 [ 0.412155] iommu: Adding device 15100000.tsecb to group 39 [ 0.413122] iommu: Adding device 15810000.se to group 40 [ 0.413329] iommu: Adding device 15820000.se to group 41 [ 0.413524] iommu: Adding device 15830000.se to group 42 [ 0.413728] iommu: Adding device 15840000.se to group 43 [ 0.414513] iommu: Adding device smmu_test to group 44 [ 0.415077] mc: mapped MMIO address: 0xffffff800a690000 -> 0x2c10000 [ 0.415088] mc: mapped MMIO address: 0xffffff800a6b0000 -> 0x2c20000 [ 0.415100] mc: mapped MMIO address: 0xffffff800a6d0000 -> 0x2c30000 [ 0.415110] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c40000 [ 0.415120] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c50000 [ 0.415127] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.415136] mc-err: mcerr ops are set to t18x [ 0.415269] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.416301] iommu: Adding device 3530000.xhci to group 45 [ 0.416313] arm-smmu: forcing sodev map for 3530000.xhci [ 0.416731] iommu: Adding device 3550000.xudc to group 46 [ 0.416741] arm-smmu: forcing sodev map for 3550000.xudc [ 0.417442] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.417448] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.417970] iommu: Adding device 17000000.gp10b to group 47 [ 0.418924] tegra-reset 5000000.clock: registered 193 resets. [ 0.420858] iommu: Adding device d000000.bpmp to group 48 [ 0.421120] bpmp: ping status is 0 [ 0.421219] bpmp d000000.bpmp: firmware tag is 4208eb5c85fe47a2235fbc0b8eb87dca [ 0.423209] bpmp d000000.bpmp: probe ok [ 0.425915] iommu: Adding device 2600000.dma to group 49 [ 0.427071] GPIO line 461 (camera-control-output-low) hogged as output/low [ 0.427100] GPIO line 457 (camera-control-output-low) hogged as output/low [ 0.427128] GPIO line 424 (wifi-enable) hogged as output/high [ 0.427155] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.427182] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.427336] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.431087] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.431229] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.432785] iommu: Adding device 10003000.pcie-controller to group 50 [ 0.432800] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.433106] iommu: Adding device sound to group 51 [ 0.433440] iommu: Adding device 3510000.hda to group 52 [ 0.440884] iommu: Adding device c1a0000.aon to group 53 [ 0.441317] vdd-ac-bat: 5000 mV [ 0.443023] vdd-1v8-ap: 1800 mV [ 0.468985] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.472029] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.472217] SCSI subsystem initialized [ 0.472340] libata version 3.00 loaded. [ 0.472517] usbcore: registered new interface driver usbfs [ 0.472550] usbcore: registered new interface driver hub [ 0.472610] usbcore: registered new device driver usb [ 0.475584] random: fast init done [ 0.477071] GPIO line 240 (tca9539_74_outlow) hogged as output/low [ 0.477460] GPIO line 241 (tca9539_74_outlow) hogged as output/low [ 0.477848] GPIO line 242 (tca9539_74_outlow) hogged as output/low [ 0.478236] GPIO line 243 (tca9539_74_outlow) hogged as output/low [ 0.478624] GPIO line 244 (tca9539_74_outlow) hogged as output/low [ 0.479012] GPIO line 245 (tca9539_74_outlow) hogged as output/low [ 0.479400] GPIO line 246 (tca9539_74_outlow) hogged as output/low [ 0.479787] GPIO line 247 (tca9539_74_outlow) hogged as output/low [ 0.480175] GPIO line 248 (tca9539_74_outlow) hogged as output/low [ 0.480563] GPIO line 249 (tca9539_74_outlow) hogged as output/low [ 0.480971] GPIO line 250 (tca9539_74_outlow) hogged as output/low [ 0.481365] GPIO line 251 (tca9539_74_outlow) hogged as output/low [ 0.481753] GPIO line 252 (tca9539_74_outlow) hogged as output/low [ 0.482140] GPIO line 253 (tca9539_74_outlow) hogged as output/low [ 0.482527] GPIO line 254 (tca9539_74_outlow) hogged as output/low [ 0.482913] GPIO line 255 (tca9539_74_outlow) hogged as output/low [ 0.483066] gpiochip_setup_dev: registered GPIOs 240 to 255 on device: gpiochip2 (tca9539) [ 0.490889] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.496735] vddio-ddr: at 1125 mV [ 0.500593] avdd_dsi_csi: 1200 mV [ 0.504587] vdd-1v8: 1800 mV [ 0.508588] vdd-3v3-sys: 3300 mV [ 0.509683] spmic-ldo0: at 1800 mV [ 0.510373] spmic-ldo1: at 800 mV [ 0.512589] vddio-3v3: 3300 mV [ 0.513310] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.516619] vdd-rtc: at 800 mV [ 0.517350] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.520586] spmic-ldo6: at 1500 mV [ 0.524601] vdd-pex-1v00: 1000 mV [ 0.525232] dvdd-pex: 1000 mV [ 0.527407] GPIO line 237 (spmic_gpio_input) hogged as input [ 0.527555] GPIO line 238 (spmic_gpio_input) hogged as input [ 0.527702] gpiochip_setup_dev: registered GPIOs 232 to 239 on device: gpiochip3 (max77620-gpio) [ 0.527877] max77620 4-003c: max77620 probe successful [ 0.528257] media: Linux media interface: v0.10 [ 0.528284] Linux video capture interface: v2.00 [ 0.530725] pps_core: LinuxPPS API ver. 1 registered [ 0.530728] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.530743] PTP clock support registered [ 0.530932] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.531113] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.531131] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.532420] trusty trusty: trusty version: Built: 18:08:29 Apr 8 2020 [ 0.532434] trusty trusty: selected api version: 3 (requested 3) [ 0.533302] Advanced Linux Sound Architecture Driver Initialized. [ 0.533616] Bluetooth: Core ver 2.22 [ 0.533641] NET: Registered protocol family 31 [ 0.533644] Bluetooth: HCI device and connection manager initialized [ 0.533650] Bluetooth: HCI socket layer initialized [ 0.533655] Bluetooth: L2CAP socket layer initialized [ 0.533667] Bluetooth: SCO socket layer initialized [ 0.534365] en-vdd-sd: 3300 mV [ 0.534725] vdd-usb0-5v: 5000 mV [ 0.535001] vdd-usb1-5v: 5000 mV [ 0.535461] vdd-3v3: 3300 mV [ 0.535696] en-vdd-vcm-2v8: 2800 mV [ 0.535927] vdd-sys-bl: 3300 mV [ 0.537677] camchar: rtcpu character device driver loaded [ 0.538263] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.539962] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.540744] clocksource: Switched to clocksource arch_sys_counter [ 0.562572] VFS: Disk quotas dquot_6.6.0 [ 0.562644] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.562882] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.563329] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.563335] nvmap_page_pool_init: Total RAM pages: 2006815 [ 0.563338] nvmap_page_pool_init: nvmap page pool size: 250851 pages (979 MB) [ 0.563401] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.565971] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.572386] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.572542] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.572882] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.572960] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.573064] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.573162] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.573307] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.573506] la/ptsa driver initialized. [ 0.573516] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.573518] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.573808] NET: Registered protocol family 2 [ 0.574419] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.574725] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.575320] TCP: Hash tables configured (established 65536 bind 65536) [ 0.575367] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.575483] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.575810] NET: Registered protocol family 1 [ 0.576233] RPC: Registered named UNIX socket transport module. [ 0.576236] RPC: Registered udp transport module. [ 0.576238] RPC: Registered tcp transport module. [ 0.576241] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.576247] PCI: CLS 0 bytes, default 64 [ 0.576356] Trying to unpack rootfs image as initramfs... [ 0.741886] Freeing initrd memory: 5432K [ 0.756829] host1x 13e10000.host1x: initialized [ 0.757940] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.760065] audit: initializing netlink subsys (disabled) [ 0.760089] audit: type=2000 audit(0.648:1): initialized [ 0.760517] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.766957] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.767924] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.768422] 9p: Installing v9fs 9p2000 file system support [ 0.770550] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.770634] io scheduler noop registered [ 0.770829] io scheduler cfq registered (default) [ 0.773999] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.875979] iommu: Adding device aconnect@2a41000:adsp_audio to group 54 [ 0.909378] iommu: Adding device 2993000.adsp to group 55 [ 0.910417] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.912535] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 0.916448] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.917532] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.918514] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.919487] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.921761] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 0.922646] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.922976] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 0.923035] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.923139] misc tegra_camera_ctrl: tegra_camera_isomgr_register: some fields not in DT. [ 0.923145] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=0, vi_iso_bw=3333332, max_bw=3333332 [ 0.925140] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.925463] tsec 15500000.tsec: initialized [ 0.926474] tsec 15100000.tsecb: initialized [ 0.928951] nvdec 15480000.nvdec: initialized [ 0.933306] falcon 15340000.vic: initialized [ 0.934587] falcon 154c0000.nvenc: initialized [ 0.935743] falcon 15380000.nvjpg: initialized [ 0.937637] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.939067] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.940485] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.941893] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.943302] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.944735] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.946214] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.947620] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.950492] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.950499] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.950525] tegradccommon 15200000.dc_common: dma mapping done [ 0.950679] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=392 [ 0.950745] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 0.950938] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 0.950953] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 0.951094] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 0.951097] tegra_cec 3960000.tegra_cec: probed [ 0.951165] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor [ 0.951318] tegradc 15200000.nvdisplay: DT parsed successfully [ 0.951340] tegradc 15200000.nvdisplay: Display dc.ffffff800b690000 registered with id=0 [ 0.958541] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.958545] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.958547] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.958745] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 0.958751] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 0.964290] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 0.964946] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 0.964967] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.965389] kfuse 3830000.kfuse: initialized [ 0.967296] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.968812] tegradc 15200000.nvdisplay: probed [ 0.969148] Console: switching to colour frame buffer device 80x30 [ 0.969170] tegradc 15200000.nvdisplay: fb registered [ 0.970260] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.972531] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 0.972535] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 0.972542] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 0.972551] tegradc 15200000.nvdisplay: blank - powerdown [ 0.972594] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 0.972596] Extcon DP: HPD disabled [ 0.972599] hpd: hpd_switch 0 [ 0.972602] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 0.972609] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 0.972615] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 0.972625] console [ttyS0] disabled [ 0.972648] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 0.973029] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor1 [ 0.973163] tegradc 15210000.nvdisplay: DT parsed successfully [ 0.973184] tegradc 15210000.nvdisplay: Display dc.ffffff800b790000 registered with id=1 [ 0.973386] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 0.973391] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 0.974290] tegradc 15210000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 0.978138] tegradc 15210000.nvdisplay: probed [ 0.999680] tegradc 15210000.nvdisplay: fb registered [ 0.999683] console [ttyS0] enabled [ 1.000241] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.000245] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.000253] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.000260] tegradc 15210000.nvdisplay: blank - powerdown [ 1.000269] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.000271] Extcon DP: HPD disabled [ 1.000274] hpd: hpd_switch 0 [ 1.000277] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.000285] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.000290] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.001231] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 1.002044] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 1.002212] serial-tegra 3130000.serial: RX in PIO mode [ 1.002911] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 1.003905] [drm] Initialized [ 1.011680] brd: module loaded [ 1.015075] loop: module loaded [ 1.015141] tegra_profiler: version: 1.141, samples/io: 48/28 [ 1.015212] tegra_profiler: auth: init [ 1.015518] nct1008_nct72 7-004c: starting parse dt [ 1.015606] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 1.015611] nct1008_nct72 7-004c: success parsing dt [ 1.015701] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 1.015992] THERMAL EST: found 3 subdevs [ 1.015996] THERMAL EST num_resources: 0 [ 1.015999] [THERMAL EST subdev 0] [ 1.016004] [THERMAL EST subdev 1] [ 1.016008] [THERMAL EST subdev 2] [ 1.016249] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 1.016251] THERMAL EST: thz register success. [ 1.016331] THERMAL EST: end of probe, return err: 0 [ 1.016965] sd: No Scsi addr parsed to reserve index [ 1.016986] hisi_sas: driver version v1.6 [ 1.020155] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 1.020162] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 1.020894] scsi host0: tegra_ahci [ 1.021260] scsi host1: tegra_ahci [ 1.021395] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 1.021398] ata2: DUMMY [ 1.026421] libphy: Fixed MDIO Bus: probed [ 1.026971] tun: Universal TUN/TAP device driver, 1.6 [ 1.026974] tun: (C) 1999-2004 Max Krasnyansky [ 1.027628] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.027630] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.027665] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.027667] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.027697] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.027700] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.027732] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.027734] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.036829] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 1.039480] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b f1 f2 79 [ 1.039570] libphy: dwc_phy: probed [ 1.039832] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 1.041669] PPP generic driver version 2.4.2 [ 1.041780] PPP BSD Compression module registered [ 1.041783] PPP Deflate Compression module registered [ 1.041796] PPP MPPE Compression module registered [ 1.041800] NET: Registered protocol family 24 [ 1.041839] usbcore: registered new interface driver r8152 [ 1.041871] usbcore: registered new interface driver asix [ 1.041900] usbcore: registered new interface driver ax88179_178a [ 1.041926] usbcore: registered new interface driver cdc_ether [ 1.041961] usbcore: registered new interface driver net1080 [ 1.041987] usbcore: registered new interface driver cdc_subset [ 1.042013] usbcore: registered new interface driver zaurus [ 1.042047] usbcore: registered new interface driver cdc_ncm [ 1.042155] VFIO - User Level meta-driver version: 0.3 [ 1.042964] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.042974] ehci-pci: EHCI PCI platform driver [ 1.043005] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.043011] ohci-pci: OHCI PCI platform driver [ 1.043038] ohci-platform: OHCI generic platform driver [ 1.044730] usbcore: registered new interface driver uas [ 1.044878] usbcore: registered new interface driver usb-storage [ 1.044944] usbcore: registered new interface driver usbserial [ 1.046545] tegra-usb-cd usb_cd: otg phy is not available yet [ 1.048079] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 1.048569] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 1.048987] mousedev: PS/2 mouse device common for all mice [ 1.049031] usbcore: registered new interface driver xpad [ 1.080912] nct1008_nct72 7-004c: initial LOC temp: 36000 [ 1.081216] nct1008_nct72 7-004c: initial EXT temp: 49000 [ 1.081815] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 1.082104] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 1.082286] nct1008_nct72 7-004c: nct1008_probe: initialized [ 1.178433] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.179493] Wake73 for irq=42 [ 1.180759] rtc rtc1: alarm rtc device [ 1.180770] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.180785] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.180968] i2c /dev entries driver [ 1.182478] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.186918] parse_throttle_dt_data: Num cap clks = 4 [ 1.186923] parse_throttle_dt_data: clk=mcpu type=1 [ 1.186926] parse_throttle_dt_data: clk=bcpu type=2 [ 1.186933] parse_throttle_dt_data: clk=gpu type=4 [ 1.186935] parse_throttle_dt_data: clk=emc type=3 [ 1.187891] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.188395] FAN: coudln't get the regulator [ 1.193511] device-mapper: uevent: version 1.0.3 [ 1.193888] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.194146] CPU EMC frequency mapping table: from device tree [ 1.200724] cpufreq: platform driver Initialization: pass [ 1.201333] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.201447] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.202273] sdhci: Secure Digital Host Controller Interface driver [ 1.202276] sdhci: Copyright(c) Pierre Ossman [ 1.202277] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.203446] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.205179] CMDQ: cmdq_platfm_init successful [ 1.206163] CQE: CMD_TIMING bit set for R1B DCMD [ 1.208472] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.212910] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 1.212957] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 1.213523] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 1.215200] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 259 [ 1.218645] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.219580] tegra-se-nvhost 15810000.se: initialized [ 1.220658] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.221243] tegra-se-nvhost 15820000.se: initialized [ 1.222136] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.222658] tegra-se-nvhost 15830000.se: initialized [ 1.223411] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.223929] tegra-se-nvhost 15840000.se: initialized [ 1.224820] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.225046] hidraw: raw HID events driver (C) Jiri Kosina [ 1.226540] usbcore: registered new interface driver usbhid [ 1.226543] usbhid: USB HID core driver [ 1.229074] tegra-i2c 3160000.i2c: no acknowledge from address 0x43 [ 1.229102] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 1.235680] ina3221x: probe of 0-0043 failed with error -121 [ 1.237990] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 1.240048] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 1.240269] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 1.240390] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 1.240581] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 1.241518] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 1.241595] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 1.241670] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 1.241718] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 1.241842] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 1.242173] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (51) [ 1.242177] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 1.242711] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 1.244298] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.244720] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.244917] register_ari_mca_banks: Registered MCA ROC:IOB [ 1.244985] register_ari_mca_banks: Registered MCA ROC:CCE [ 1.245304] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.245307] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 1.245310] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 1.245358] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.245361] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 1.245363] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 1.245407] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.245410] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 1.245412] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 1.245467] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.245469] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 1.245471] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 1.245517] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.245519] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 1.245521] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 1.245564] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.245568] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 1.245570] tegra18-bridge 2100000.axip2p: bridge probed OK [ 1.245615] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.245619] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 1.245621] tegra18-bridge 2110000.axip2p: bridge probed OK [ 1.245664] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.245668] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 1.245670] tegra18-bridge 2120000.axip2p: bridge probed OK [ 1.245712] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.245717] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 1.245719] tegra18-bridge 2130000.axip2p: bridge probed OK [ 1.245762] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.245765] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 1.245767] tegra18-bridge 2140000.axip2p: bridge probed OK [ 1.245809] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.245814] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 1.245816] tegra18-bridge 2150000.axip2p: bridge probed OK [ 1.245861] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.245866] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 1.245868] tegra18-bridge 2160000.axip2p: bridge probed OK [ 1.245912] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.245917] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 1.245919] tegra18-bridge 2170000.axip2p: bridge probed OK [ 1.245962] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.245967] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 1.245969] tegra18-bridge 2180000.axip2p: bridge probed OK [ 1.246013] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.246018] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 1.246020] tegra18-bridge 2190000.axip2p: bridge probed OK [ 1.246085] **** A57 ECC: Enabled [ 1.246087] tegra18_a57_serr_init: on CPU 0 a A57 Core [ 1.246148] tegra18x_actmon d230000.actmon: in actmon_register()... [ 1.246579] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.246987] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 1.247108] denver_knobs_init:MTS_VERSION:47926945 [ 1.248613] nvpmodel: initialized successfully [ 1.248770] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.250755] trusty-virtio trusty:virtio: initializing [ 1.252813] trusty_ipc virtio0: vring0: va(pa) ffffffc1e6a2e000(0) qsz 32 notifyid 1 [ 1.252820] trusty_ipc virtio0: vring1: va(pa) ffffffc1e6a54000(0) qsz 32 notifyid 2 [ 1.252884] trusty-virtio trusty:virtio: initializing done [ 1.252932] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.253083] trusty_ipc virtio0: is online [ 1.254538] usbcore: registered new interface driver snd-usb-audio [ 1.262135] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 1.262262] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 1.264901] gpio tegra-gpio wake71 for gpio=125(P:5) [ 1.264952] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.302473] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.316588] mmc0: periodic cache flush enabled [ 1.316596] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.317161] mmcblk0: mmc0:0001 DG4032 29.1 GiB [ 1.321297] mmcblk0boot0: mmc0:0001 DG4032 partition 1 4.00 MiB [ 1.325424] mmcblk0boot1: mmc0:0001 DG4032 partition 2 4.00 MiB [ 1.325530] mmcblk0rpmb: mmc0:0001 DG4032 partition 3 4.00 MiB [ 1.329388] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 1.333630] OPE platform probe [ 1.333698] OPE platform probe successful [ 1.335116] ata1: SATA link down (SStatus 0 SControl 300) [ 1.348862] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.406719] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.406795] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.406864] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.406928] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.406992] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.407058] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.407125] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.407188] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.407253] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.407318] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.407381] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 1.407448] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 1.407514] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 1.407581] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 1.407644] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 1.407715] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 1.407781] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 1.407845] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 1.407910] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 1.407974] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 1.432401] u32 classifier [ 1.432404] Actions configured [ 1.432461] Initializing XFRM netlink socket [ 1.433028] NET: Registered protocol family 10 [ 1.433599] NET: Registered protocol family 17 [ 1.433609] NET: Registered protocol family 15 [ 1.433666] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.433702] Bluetooth: RFCOMM socket layer initialized [ 1.433709] Bluetooth: RFCOMM ver 1.11 [ 1.433714] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.433717] Bluetooth: HIDP socket layer initialized [ 1.433732] 9pnet: Installing 9P2000 support [ 1.433765] Key type dns_resolver registered [ 1.434781] Registered cp15_barrier emulation handler [ 1.435793] Registered setend emulation handler [ 1.436866] registered taskstats version 1 [ 1.448235] isp 15600000.isp: initialized [ 1.479839] nvcsi 150c0000.nvcsi: initialized [ 1.479910] nvcsi: probe of 150c0000.nvcsi failed with error -22 [ 1.481725] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 1.498655] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 1.501084] mmc1: Applying tuning correction [ 1.501096] mmc1: Tap value after applying correction 65 [ 1.501102] mmc1: hw tuning done ... [ 1.501863] tegra-vi4 15700000.vi: initialized [ 1.505070] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 1.507680] tegra-usb-cd usb_cd: otg phy is not available yet [ 1.510828] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 1.519298] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 1.519371] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 1.519442] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 1.519555] input: gpio-keys as /devices/gpio-keys/input/input2 [ 1.520591] tegra-usb-cd usb_cd: otg phy is not available yet [ 1.523836] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 1.557419] tegra_rtc c2a0000.rtc: setting system clock to 2020-08-17 12:21:29 UTC (1597666889) [ 1.558250] mmcblk mmc0:0001: Card claimed for testing. [ 1.586407] bpmp: mounted debugfs mirror [ 1.587369] bwmgr: missing cdev-type property [ 1.592780] spmic-ldo0: disabling [ 1.592942] spmic-ldo1: disabling [ 1.593087] en-vdd-sd: disabling [ 1.593089] vdd-usb0-5v: disabling [ 1.593091] vdd-usb1-5v: disabling [ 1.593094] vdd-3v3: disabling [ 1.593096] en-vdd-vcm-2v8: disabling [ 1.593098] vdd-sys-bl: disabling [ 1.593100] ALSA device list: [ 1.593103] #0: tegra-hda at 0x3518000 irq 385 [ 1.593105] #1: tegra-snd-t186ref-mobile-rt565x [ 1.595318] Freeing unused kernel memory: 8512K [ 1.616287] Root device found: mmcblk0p1 [ 1.617141] Found dev node: /dev/mmcblk0p1 [ 1.636415] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.637063] Rootfs mounted over mmcblk0p1 [ 1.654710] Switching from initrd to actual rootfs [ 1.758820] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.773256] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.781772] cgroup: cgroup2: unknown option "nsdelegate" [ 1.805270] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.805978] systemd[1]: Detected architecture arm64. [ 1.824371] systemd[1]: Set hostname to . [ 1.908322] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 1.908330] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 1.960775] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 1.960779] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.019317] random: systemd: uninitialized urandom read (16 bytes read) [ 2.020622] systemd[1]: Created slice System Slice. [ 2.020825] random: systemd: uninitialized urandom read (16 bytes read) [ 2.020993] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.021022] random: systemd: uninitialized urandom read (16 bytes read) [ 2.021118] systemd[1]: Listening on RPCbind Server Activation Socket. [ 2.021241] systemd[1]: Listening on udev Control Socket. [ 2.021858] systemd[1]: Created slice User and Session Slice. [ 2.056439] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.069847] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 2.071336] tegra-usb-cd usb_cd: otg phy is not available yet [ 2.075850] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 2.163350] tegra-usb-cd usb_cd: otg phy is not available yet [ 2.168727] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 2.180488] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.182521] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.357277] systemd-journald[2296]: Received request to flush runtime journal from PID 1 [ 2.586813] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.988464] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.097843] random: crng init done [ 3.101253] random: 7 urandom warning(s) missed due to ratelimiting [ 3.382226] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.384258] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.575779] CPU1: shutdown [ 3.578556] psci: CPU1 killed. [ 3.588273] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.588544] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.621702] CPU2: shutdown [ 3.624429] psci: CPU2 killed. [ 3.758093] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.777412] tegra-usb-cd usb_cd: otg phy is not available yet [ 3.782380] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 3.784718] imx392 2-0036: [imx392]: probing v4l2 sensor at addr 0x36. [ 3.785955] imx392 2-0036: tegracam sensor driver:imx392_v2.0.6 [ 3.785958] imx392 2-0036: imx392_board_setup++ [ 3.785961] imx392 2-0036: imx392_power_on: power on [ 3.786080] ------------[ cut here ]------------ [ 3.786091] WARNING: CPU: 3 PID: 3121 at /home/pkavvathas/repositories/Stereo-Vision_TX2_32.4.2/build/Linux_for_Tegra/sources/kernel/kernel-4.9/drivers/gpio/gpiolib.c:2697 gpiod_set_raw_value+0xa0/0xc8 [ 3.786099] Modules linked in: imx392(+) spidev overlay nvgpu bluedroid_pm ip_tables x_tables [ 3.786104] CPU: 3 PID: 3121 Comm: systemd-udevd Not tainted 4.9.140-tegra #4 [ 3.786105] Hardware name: quill (DT) [ 3.786106] task: ffffffc1e26b7000 task.stack: ffffffc1e2f20000 [ 3.786109] PC is at gpiod_set_raw_value+0xa0/0xc8 [ 3.786114] LR is at init_module+0x19c028/0x19c480 [imx392] [ 3.786116] pc : [] lr : [] pstate: 80400045 [ 3.786117] sp : ffffffc1e2f23a20 [ 3.786120] x29: ffffffc1e2f23a20 x28: 0000000000000018 [ 3.786122] x27: 000000000000008b x26: 0000000000000030 [ 3.786124] x25: 0000000000000000 x24: ffffff80011186b8 [ 3.786126] x23: ffffffc1eb163c20 x22: ffffffc1eb163c20 [ 3.786128] x21: ffffffc1eb163c20 x20: 0000000000000000 [ 3.786130] x19: ffffffc1eb2cd040 x18: 0000000000000000 [ 3.786132] x17: 0000000000000003 x16: 0000000000000000 [ 3.786134] x15: 0000000000000000 x14: ffffffc1e10ac6b8 [ 3.786136] x13: 0000000000000040 x12: 0000000000000000 [ 3.786138] x11: 00000000028b5d06 x10: 0000000000000a10 [ 3.786140] x9 : ffffffc1e2f238a0 x8 : ffffffc1e26b7a70 [ 3.786142] x7 : 00000000001e133e x6 : 0000000000000400 [ 3.786144] x5 : 0000000000000000 x4 : ffffff8009eb7700 [ 3.786146] x3 : 0000000000000010 x2 : ffffffc1eb2cce98 [ 3.786148] x1 : 0000000000000000 x0 : 0000000000000001 [ 3.786149] ---[ end trace 2ab446ad48c2c42f ]--- [ 3.786151] Call trace: [ 3.786153] [] gpiod_set_raw_value+0xa0/0xc8 [ 3.786157] [] init_module+0x19c028/0x19c480 [imx392] [ 3.786161] [] init_module+0x19c338/0x19c480 [imx392] [ 3.786166] [] i2c_device_probe+0x144/0x258 [ 3.786170] [] driver_probe_device+0xd8/0x408 [ 3.786172] [] __driver_attach+0xdc/0x128 [ 3.786174] [] bus_for_each_dev+0x5c/0xa8 [ 3.786176] [] driver_attach+0x30/0x40 [ 3.786178] [] bus_add_driver+0x20c/0x2a8 [ 3.786180] [] driver_register+0x6c/0x110 [ 3.786181] [] i2c_register_driver+0x4c/0xb0 [ 3.786185] [] init_module+0x18/0x30 [imx392] [ 3.786189] [] do_one_initcall+0x44/0x130 [ 3.786192] [] do_init_module+0x64/0x1a8 [ 3.786196] [] load_module+0x10a4/0x12d8 [ 3.786197] [] SyS_finit_module+0xd8/0xf0 [ 3.786199] [] __sys_trace_return+0x0/0x4 [ 3.787383] invalid GPIO -2 [ 3.787405] ------------[ cut here ]------------ [ 3.787412] WARNING: CPU: 3 PID: 3121 at /home/pkavvathas/repositories/Stereo-Vision_TX2_32.4.2/build/Linux_for_Tegra/sources/kernel/kernel-4.9/drivers/gpio/gpiolib.c:106 gpio_to_desc+0xd8/0xe0 [ 3.787421] Modules linked in: imx392(+) spidev overlay nvgpu bluedroid_pm ip_tables x_tables [ 3.787426] CPU: 3 PID: 3121 Comm: systemd-udevd Tainted: G W 4.9.140-tegra #4 [ 3.787427] Hardware name: quill (DT) [ 3.787428] task: ffffffc1e26b7000 task.stack: ffffffc1e2f20000 [ 3.787430] PC is at gpio_to_desc+0xd8/0xe0 [ 3.787432] LR is at gpio_to_desc+0xd8/0xe0 [ 3.787433] pc : [] lr : [] pstate: 20400045 [ 3.787434] sp : ffffffc1e2f23a10 [ 3.787436] x29: ffffffc1e2f23a10 x28: 0000000000000018 [ 3.787439] x27: 000000000000008b x26: 0000000000000030 [ 3.787441] x25: 0000000000000000 x24: ffffff80011186b8 [ 3.787443] x23: ffffffc1eb163c20 x22: ffffffc1eb163c20 [ 3.787445] x21: ffffff800a163000 x20: 00000000fffffffe [ 3.787447] x19: 0000000000000000 x18: 0000000000000001 [ 3.787448] x17: 0000000000000001 x16: 0000000000000000 [ 3.787450] x15: ffffffffffffffff x14: ffffff800a11c1e0 [ 3.787452] x13: ffffff800a11be0f x12: ffffff8009e64000 [ 3.787455] x11: 0000000000000000 x10: ffffff800a11b000 [ 3.787458] x9 : 0000000000000000 x8 : ffffffc1f67d0f0b [ 3.787460] x7 : 0000000000000000 x6 : 0000000016163ea3 [ 3.787462] x5 : 0000000000000000 x4 : 0000000000000000 [ 3.787464] x3 : ffffffffffffffff x2 : 00000041ed862000 [ 3.787467] x1 : ffffffc1e26b7000 x0 : 000000000000000f [ 3.787468] ---[ end trace 2ab446ad48c2c430 ]--- [ 3.787470] Call trace: [ 3.787472] [] gpio_to_desc+0xd8/0xe0 [ 3.787478] [] init_module+0x19c010/0x19c480 [imx392] [ 3.787482] [] init_module+0x19c338/0x19c480 [imx392] [ 3.787486] [] i2c_device_probe+0x144/0x258 [ 3.787489] [] driver_probe_device+0xd8/0x408 [ 3.787491] [] __driver_attach+0xdc/0x128 [ 3.787493] [] bus_for_each_dev+0x5c/0xa8 [ 3.787495] [] driver_attach+0x30/0x40 [ 3.787496] [] bus_add_driver+0x20c/0x2a8 [ 3.787498] [] driver_register+0x6c/0x110 [ 3.787500] [] i2c_register_driver+0x4c/0xb0 [ 3.787504] [] init_module+0x18/0x30 [imx392] [ 3.787507] [] do_one_initcall+0x44/0x130 [ 3.787511] [] do_init_module+0x64/0x1a8 [ 3.787514] [] load_module+0x10a4/0x12d8 [ 3.787516] [] SyS_finit_module+0xd8/0xf0 [ 3.787518] [] __sys_trace_return+0x0/0x4 [ 3.787896] ------------[ cut here ]------------ [ 3.787904] WARNING: CPU: 3 PID: 3121 at /home/pkavvathas/repositories/Stereo-Vision_TX2_32.4.2/build/Linux_for_Tegra/sources/kernel/kernel-4.9/drivers/gpio/gpiolib.c:2697 gpiod_set_raw_value+0xa0/0xc8 [ 3.787910] Modules linked in: imx392(+) spidev overlay nvgpu bluedroid_pm ip_tables x_tables [ 3.787914] CPU: 3 PID: 3121 Comm: systemd-udevd Tainted: G W 4.9.140-tegra #4 [ 3.787915] Hardware name: quill (DT) [ 3.787916] task: ffffffc1e26b7000 task.stack: ffffffc1e2f20000 [ 3.787918] PC is at gpiod_set_raw_value+0xa0/0xc8 [ 3.787923] LR is at init_module+0x19c008/0x19c480 [imx392] [ 3.787924] pc : [] lr : [] pstate: 80400045 [ 3.787925] sp : ffffffc1e2f23a20 [ 3.787928] x29: ffffffc1e2f23a20 x28: 0000000000000018 [ 3.787930] x27: 000000000000008b x26: 0000000000000030 [ 3.787932] x25: 0000000000000000 x24: ffffff80011186b8 [ 3.787934] x23: ffffffc1eb163c20 x22: ffffffc1eb163c20 [ 3.787936] x21: ffffffc1eb163c20 x20: 0000000000000000 [ 3.787938] x19: ffffffc1eb2cd020 x18: 0000000000000001 [ 3.787939] x17: 0000000000000001 x16: 0000000000000000 [ 3.787941] x15: ffffffffffffffff x14: ffffff800a11c1e0 [ 3.787943] x13: ffffff800a11be0f x12: ffffff8009e64000 [ 3.787945] x11: 0000000000000000 x10: ffffff800a11b000 [ 3.787947] x9 : 0000000000000000 x8 : ffffffc1f67d0f0b [ 3.787949] x7 : 0000000000000000 x6 : 0000000016163ea3 [ 3.787951] x5 : 0000000000000000 x4 : ffffff8009eb7700 [ 3.787953] x3 : 0000000000000010 x2 : ffffffc1eb2cce98 [ 3.787955] x1 : 0000000000000000 x0 : 0000000000000001 [ 3.787956] ---[ end trace 2ab446ad48c2c431 ]--- [ 3.787957] Call trace: [ 3.787960] [] gpiod_set_raw_value+0xa0/0xc8 [ 3.787963] [] init_module+0x19c008/0x19c480 [imx392] [ 3.787967] [] init_module+0x19c338/0x19c480 [imx392] [ 3.787970] [] i2c_device_probe+0x144/0x258 [ 3.787973] [] driver_probe_device+0xd8/0x408 [ 3.787974] [] __driver_attach+0xdc/0x128 [ 3.787976] [] bus_for_each_dev+0x5c/0xa8 [ 3.787978] [] driver_attach+0x30/0x40 [ 3.787979] [] bus_add_driver+0x20c/0x2a8 [ 3.787981] [] driver_register+0x6c/0x110 [ 3.787983] [] i2c_register_driver+0x4c/0xb0 [ 3.787986] [] init_module+0x18/0x30 [imx392] [ 3.787989] [] do_one_initcall+0x44/0x130 [ 3.787992] [] do_init_module+0x64/0x1a8 [ 3.787995] [] load_module+0x10a4/0x12d8 [ 3.787996] [] SyS_finit_module+0xd8/0xf0 [ 3.787998] [] __sys_trace_return+0x0/0x4 [ 3.788719] ------------[ cut here ]------------ [ 3.788726] WARNING: CPU: 3 PID: 3121 at /home/pkavvathas/repositories/Stereo-Vision_TX2_32.4.2/build/Linux_for_Tegra/sources/kernel/kernel-4.9/drivers/gpio/gpiolib.c:2697 gpiod_set_raw_value+0xa0/0xc8 [ 3.788733] Modules linked in: imx392(+) spidev overlay nvgpu bluedroid_pm ip_tables x_tables [ 3.788736] CPU: 3 PID: 3121 Comm: systemd-udevd Tainted: G W 4.9.140-tegra #4 [ 3.788737] Hardware name: quill (DT) [ 3.788739] task: ffffffc1e26b7000 task.stack: ffffffc1e2f20000 [ 3.788740] PC is at gpiod_set_raw_value+0xa0/0xc8 [ 3.788745] LR is at init_module+0x19bff8/0x19c480 [imx392] [ 3.788747] pc : [] lr : [] pstate: 80400045 [ 3.788747] sp : ffffffc1e2f23a20 [ 3.788750] x29: ffffffc1e2f23a20 x28: 0000000000000018 [ 3.788752] x27: 000000000000008b x26: 0000000000000030 [ 3.788754] x25: 0000000000000000 x24: ffffff80011186b8 [ 3.788756] x23: ffffffc1eb163c20 x22: ffffffc1eb163c20 [ 3.788758] x21: ffffffc1eb163c20 x20: 0000000000000000 [ 3.788760] x19: ffffffc1eb2cd000 x18: 00000000000003ea [ 3.788762] x17: 0000000000000001 x16: 0000000000000000 [ 3.788763] x15: 0000000000000000 x14: 0000000000001dd3 [ 3.788765] x13: 00000000000070f7 x12: 0000000000000400 [ 3.788767] x11: 0000000000000400 x10: 0000000000000a10 [ 3.788769] x9 : ffffffc1e2f23570 x8 : 0000000000000000 [ 3.788771] x7 : 0000000000000000 x6 : 0000000000000015 [ 3.788773] x5 : 00000000000002f0 x4 : ffffff8009eb7700 [ 3.788775] x3 : 0000000000000010 x2 : ffffffc1eb2cce98 [ 3.788777] x1 : 0000000000000000 x0 : 0000000000000001 [ 3.788779] ---[ end trace 2ab446ad48c2c432 ]--- [ 3.788780] Call trace: [ 3.788782] [] gpiod_set_raw_value+0xa0/0xc8 [ 3.788785] [] init_module+0x19bff8/0x19c480 [imx392] [ 3.788789] [] init_module+0x19c338/0x19c480 [imx392] [ 3.788792] [] i2c_device_probe+0x144/0x258 [ 3.788794] [] driver_probe_device+0xd8/0x408 [ 3.788796] [] __driver_attach+0xdc/0x128 [ 3.788798] [] bus_for_each_dev+0x5c/0xa8 [ 3.788800] [] driver_attach+0x30/0x40 [ 3.788801] [] bus_add_driver+0x20c/0x2a8 [ 3.788803] [] driver_register+0x6c/0x110 [ 3.788805] [] i2c_register_driver+0x4c/0xb0 [ 3.788808] [] init_module+0x18/0x30 [imx392] [ 3.788811] [] do_one_initcall+0x44/0x130 [ 3.788814] [] do_init_module+0x64/0x1a8 [ 3.788816] [] load_module+0x10a4/0x12d8 [ 3.788818] [] SyS_finit_module+0xd8/0xf0 [ 3.788819] [] __sys_trace_return+0x0/0x4 [ 3.789262] ------------[ cut here ]------------ [ 3.789272] WARNING: CPU: 3 PID: 3121 at /home/pkavvathas/repositories/Stereo-Vision_TX2_32.4.2/build/Linux_for_Tegra/sources/kernel/kernel-4.9/drivers/gpio/gpiolib.c:2697 gpiod_set_raw_value+0xa0/0xc8 [ 3.789279] Modules linked in: imx392(+) spidev overlay nvgpu bluedroid_pm ip_tables x_tables [ 3.789283] CPU: 3 PID: 3121 Comm: systemd-udevd Tainted: G W 4.9.140-tegra #4 [ 3.789284] Hardware name: quill (DT) [ 3.789286] task: ffffffc1e26b7000 task.stack: ffffffc1e2f20000 [ 3.789287] PC is at gpiod_set_raw_value+0xa0/0xc8 [ 3.789292] LR is at init_module+0x19bfe8/0x19c480 [imx392] [ 3.789294] pc : [] lr : [] pstate: 80400045 [ 3.789294] sp : ffffffc1e2f23a20 [ 3.789297] x29: ffffffc1e2f23a20 x28: 0000000000000018 [ 3.789299] x27: 000000000000008b x26: 0000000000000030 [ 3.789301] x25: 0000000000000000 x24: ffffff80011186b8 [ 3.789303] x23: ffffffc1eb163c20 x22: ffffffc1eb163c20 [ 3.789305] x21: ffffffc1eb163c20 x20: 0000000000000000 [ 3.789307] x19: ffffffc1eb2cd120 x18: 0000000000000000 [ 3.789309] x17: 0000000000000001 x16: 0000000000000000 [ 3.789311] x15: 0000000000000000 x14: ffffffc1e10ac6b8 [ 3.789313] x13: 0000000000000040 x12: 0000000000000000 [ 3.789315] x11: 00000000029a532b x10: 0000000000000a10 [ 3.789317] x9 : ffffffc1e2f23570 x8 : 0000000000000000 [ 3.789319] x7 : 000000000026aec4 x6 : 0000000000000400 [ 3.789321] x5 : 0000000000000000 x4 : ffffff8009eb7700 [ 3.789323] x3 : 0000000000000010 x2 : ffffffc1eb2cce98 [ 3.789324] x1 : 0000000000000000 x0 : 0000000000000001 [ 3.789326] ---[ end trace 2ab446ad48c2c433 ]--- [ 3.789327] Call trace: [ 3.789330] [] gpiod_set_raw_value+0xa0/0xc8 [ 3.789333] [] init_module+0x19bfe8/0x19c480 [imx392] [ 3.789337] [] init_module+0x19c338/0x19c480 [imx392] [ 3.789340] [] i2c_device_probe+0x144/0x258 [ 3.789343] [] driver_probe_device+0xd8/0x408 [ 3.789345] [] __driver_attach+0xdc/0x128 [ 3.789347] [] bus_for_each_dev+0x5c/0xa8 [ 3.789348] [] driver_attach+0x30/0x40 [ 3.789350] [] bus_add_driver+0x20c/0x2a8 [ 3.789352] [] driver_register+0x6c/0x110 [ 3.789354] [] i2c_register_driver+0x4c/0xb0 [ 3.789358] [] init_module+0x18/0x30 [imx392] [ 3.789360] [] do_one_initcall+0x44/0x130 [ 3.789363] [] do_init_module+0x64/0x1a8 [ 3.789365] [] load_module+0x10a4/0x12d8 [ 3.789367] [] SyS_finit_module+0xd8/0xf0 [ 3.789369] [] __sys_trace_return+0x0/0x4 [ 3.790032] ------------[ cut here ]------------ [ 3.790043] WARNING: CPU: 3 PID: 3121 at /home/pkavvathas/repositories/Stereo-Vision_TX2_32.4.2/build/Linux_for_Tegra/sources/kernel/kernel-4.9/drivers/gpio/gpiolib.c:2697 gpiod_set_raw_value+0xa0/0xc8 [ 3.790051] Modules linked in: imx392(+) spidev overlay nvgpu bluedroid_pm ip_tables x_tables [ 3.790055] CPU: 3 PID: 3121 Comm: systemd-udevd Tainted: G W 4.9.140-tegra #4 [ 3.790055] Hardware name: quill (DT) [ 3.790056] task: ffffffc1e26b7000 task.stack: ffffffc1e2f20000 [ 3.790058] PC is at gpiod_set_raw_value+0xa0/0xc8 [ 3.790064] LR is at init_module+0x19bf58/0x19c480 [imx392] [ 3.790065] pc : [] lr : [] pstate: 80400045 [ 3.790066] sp : ffffffc1e2f23a20 [ 3.790069] x29: ffffffc1e2f23a20 x28: 0000000000000018 [ 3.790072] x27: 000000000000008b x26: 0000000000000030 [ 3.790074] x25: 0000000000000000 x24: ffffff80011186b8 [ 3.790077] x23: ffffffc1eb163c20 x22: ffffffc1eb163c20 [ 3.790079] x21: ffffffc1eb163c20 x20: 0000000000000001 [ 3.790081] x19: ffffffc1eb2cd100 x18: 0000000000000000 [ 3.790084] x17: 0000000000000001 x16: 0000000000000000 [ 3.790086] x15: 0000000000000000 x14: 00000000000050ed [ 3.790088] x13: 000000000000b500 x12: 0000000000000400 [ 3.790090] x11: 0000000000000400 x10: 0000000000000a10 [ 3.790093] x9 : ffffffc1e2f238a0 x8 : ffffffc1e26b7a70 [ 3.790095] x7 : 00000000fffedea1 x6 : 00000000000002f0 [ 3.790097] x5 : 0000000000000000 x4 : ffffff8009eb7700 [ 3.790100] x3 : 0000000000000010 x2 : ffffffc1eb2cce98 [ 3.790102] x1 : 0000000000000001 x0 : 0000000000000001 [ 3.790104] ---[ end trace 2ab446ad48c2c434 ]--- [ 3.790105] Call trace: [ 3.790107] [] gpiod_set_raw_value+0xa0/0xc8 [ 3.790111] [] init_module+0x19bf58/0x19c480 [imx392] [ 3.790115] [] init_module+0x19c338/0x19c480 [imx392] [ 3.790118] [] i2c_device_probe+0x144/0x258 [ 3.790122] [] driver_probe_device+0xd8/0x408 [ 3.790124] [] __driver_attach+0xdc/0x128 [ 3.790126] [] bus_for_each_dev+0x5c/0xa8 [ 3.790128] [] driver_attach+0x30/0x40 [ 3.790130] [] bus_add_driver+0x20c/0x2a8 [ 3.790132] [] driver_register+0x6c/0x110 [ 3.790134] [] i2c_register_driver+0x4c/0xb0 [ 3.790137] [] init_module+0x18/0x30 [imx392] [ 3.790140] [] do_one_initcall+0x44/0x130 [ 3.790143] [] do_init_module+0x64/0x1a8 [ 3.790145] [] load_module+0x10a4/0x12d8 [ 3.790147] [] SyS_finit_module+0xd8/0xf0 [ 3.790149] [] __sys_trace_return+0x0/0x4 [ 3.790520] ------------[ cut here ]------------ [ 3.790528] WARNING: CPU: 3 PID: 3121 at /home/pkavvathas/repositories/Stereo-Vision_TX2_32.4.2/build/Linux_for_Tegra/sources/kernel/kernel-4.9/drivers/gpio/gpiolib.c:2697 gpiod_set_raw_value+0xa0/0xc8 [ 3.790536] Modules linked in: imx392(+) spidev overlay nvgpu bluedroid_pm ip_tables x_tables [ 3.790540] CPU: 3 PID: 3121 Comm: systemd-udevd Tainted: G W 4.9.140-tegra #4 [ 3.790541] Hardware name: quill (DT) [ 3.790542] task: ffffffc1e26b7000 task.stack: ffffffc1e2f20000 [ 3.790544] PC is at gpiod_set_raw_value+0xa0/0xc8 [ 3.790549] LR is at init_module+0x19bfb8/0x19c480 [imx392] [ 3.790551] pc : [] lr : [] pstate: 80400045 [ 3.790552] sp : ffffffc1e2f23a20 [ 3.790554] x29: ffffffc1e2f23a20 x28: 0000000000000018 [ 3.790556] x27: 000000000000008b x26: 0000000000000030 [ 3.790558] x25: 0000000000000000 x24: ffffff80011186b8 [ 3.790560] x23: ffffffc1eb163c20 x22: ffffffc1eb163c20 [ 3.790562] x21: ffffffc1eb163c20 x20: 0000000000000001 [ 3.790564] x19: ffffffc1eb2cd120 x18: 0000000000000000 [ 3.790566] x17: 0000000000000001 x16: 0000000000000000 [ 3.790568] x15: 0000000000000000 x14: 0000000000000000 [ 3.790570] x13: 0000000000000026 x12: 071c71c71c71c71c [ 3.790572] x11: 000000000000000b x10: 0000000000000a10 [ 3.790574] x9 : ffffffc1e2f238a0 x8 : ffffffc1e26b7a70 [ 3.790576] x7 : 00000000fffedea1 x6 : 00000000000002f0 [ 3.790578] x5 : 0000000000000000 x4 : ffffff8009eb7700 [ 3.790580] x3 : 0000000000000010 x2 : ffffffc1eb2cce98 [ 3.790581] x1 : 0000000000000001 x0 : 0000000000000001 [ 3.790583] ---[ end trace 2ab446ad48c2c435 ]--- [ 3.790584] Call trace: [ 3.790587] [] gpiod_set_raw_value+0xa0/0xc8 [ 3.790590] [] init_module+0x19bfb8/0x19c480 [imx392] [ 3.790594] [] init_module+0x19c338/0x19c480 [imx392] [ 3.790597] [] i2c_device_probe+0x144/0x258 [ 3.790600] [] driver_probe_device+0xd8/0x408 [ 3.790602] [] __driver_attach+0xdc/0x128 [ 3.790604] [] bus_for_each_dev+0x5c/0xa8 [ 3.790605] [] driver_attach+0x30/0x40 [ 3.790607] [] bus_add_driver+0x20c/0x2a8 [ 3.790608] [] driver_register+0x6c/0x110 [ 3.790610] [] i2c_register_driver+0x4c/0xb0 [ 3.790614] [] init_module+0x18/0x30 [imx392] [ 3.790616] [] do_one_initcall+0x44/0x130 [ 3.790619] [] do_init_module+0x64/0x1a8 [ 3.790622] [] load_module+0x10a4/0x12d8 [ 3.790624] [] SyS_finit_module+0xd8/0xf0 [ 3.790625] [] __sys_trace_return+0x0/0x4 [ 3.791110] invalid GPIO -2 [ 3.791132] ------------[ cut here ]------------ [ 3.791138] WARNING: CPU: 3 PID: 3121 at /home/pkavvathas/repositories/Stereo-Vision_TX2_32.4.2/build/Linux_for_Tegra/sources/kernel/kernel-4.9/drivers/gpio/gpiolib.c:106 gpio_to_desc+0xd8/0xe0 [ 3.791146] Modules linked in: imx392(+) spidev overlay nvgpu bluedroid_pm ip_tables x_tables [ 3.791151] CPU: 3 PID: 3121 Comm: systemd-udevd Tainted: G W 4.9.140-tegra #4 [ 3.791152] Hardware name: quill (DT) [ 3.791153] task: ffffffc1e26b7000 task.stack: ffffffc1e2f20000 [ 3.791155] PC is at gpio_to_desc+0xd8/0xe0 [ 3.791156] LR is at gpio_to_desc+0xd8/0xe0 [ 3.791158] pc : [] lr : [] pstate: 20400045 [ 3.791159] sp : ffffffc1e2f23a10 [ 3.791161] x29: ffffffc1e2f23a10 x28: 0000000000000018 [ 3.791163] x27: 000000000000008b x26: 0000000000000030 [ 3.791165] x25: 0000000000000000 x24: ffffff80011186b8 [ 3.791167] x23: ffffffc1eb163c20 x22: ffffffc1eb163c20 [ 3.791169] x21: ffffff800a163000 x20: 00000000fffffffe [ 3.791171] x19: 0000000000000000 x18: 0000000000000001 [ 3.791172] x17: 0000000000000001 x16: 0000000000000000 [ 3.791174] x15: ffffffffffffffff x14: ffffff800a11c1e0 [ 3.791176] x13: ffffff800a11be0f x12: ffffff8009e64000 [ 3.791178] x11: 0000000000000000 x10: ffffff800a11b000 [ 3.791180] x9 : 0000000000000000 x8 : ffffffc1f67d5433 [ 3.791182] x7 : 0000000000000000 x6 : 0000000016163ea3 [ 3.791184] x5 : 0000000000000000 x4 : 0000000000000000 [ 3.791186] x3 : ffffffffffffffff x2 : 00000041ed862000 [ 3.791188] x1 : ffffffc1e26b7000 x0 : 000000000000000f [ 3.791189] ---[ end trace 2ab446ad48c2c436 ]--- [ 3.791191] Call trace: [ 3.791193] [] gpio_to_desc+0xd8/0xe0 [ 3.791198] [] init_module+0x19bfa0/0x19c480 [imx392] [ 3.791201] [] init_module+0x19c338/0x19c480 [imx392] [ 3.791204] [] i2c_device_probe+0x144/0x258 [ 3.791208] [] driver_probe_device+0xd8/0x408 [ 3.791210] [] __driver_attach+0xdc/0x128 [ 3.791211] [] bus_for_each_dev+0x5c/0xa8 [ 3.791213] [] driver_attach+0x30/0x40 [ 3.791215] [] bus_add_driver+0x20c/0x2a8 [ 3.791217] [] driver_register+0x6c/0x110 [ 3.791219] [] i2c_register_driver+0x4c/0xb0 [ 3.791222] [] init_module+0x18/0x30 [imx392] [ 3.791225] [] do_one_initcall+0x44/0x130 [ 3.791228] [] do_init_module+0x64/0x1a8 [ 3.791230] [] load_module+0x10a4/0x12d8 [ 3.791232] [] SyS_finit_module+0xd8/0xf0 [ 3.791234] [] __sys_trace_return+0x0/0x4 [ 3.791329] imx392 2-0036: imx392_set_gain: val: 0 (/10) [times], gain: 0 [ 3.792042] tegra-i2c 3180000.i2c: no acknowledge from address 0x36 [ 3.792074] imx392 2-0036: imx392_write_reg: i2c write failed, 3205 = 0 [ 3.792076] imx392 2-0036: imx392_set_gain: GAIN control try 1 error [ 3.792079] imx392 2-0036: imx392_set_gain: val: 0 (/10) [times], gain: 48 [ 3.792082] imx392 2-0036: imx392_set_gain: val:0, gain: 48 [ 3.792343] tegra-i2c 3180000.i2c: no acknowledge from address 0x36 [ 3.792471] imx392 2-0036: imx392_write_reg: i2c write failed, 3205 = 0 [ 3.792473] imx392 2-0036: imx392_set_gain: GAIN control try 2 error [ 3.792476] imx392 2-0036: Error -121 in control hdl setup [ 3.792480] imx392 2-0036: Failed to init ctrls imx392 [ 3.792482] imx392 2-0036: tegra camera subdev registration failed [ 3.792541] imx392: probe of 2-0036 failed with error -121 [ 3.825739] zram: Added device: zram0 [ 3.826526] zram: Added device: zram1 [ 3.826951] zram: Added device: zram2 [ 3.844440] zram: Added device: zram3 [ 3.869653] gpio tegra-gpio wake18 for gpio=101(M:5) [ 3.872733] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.885836] zram0: detected capacity change from 0 to 1029275648 [ 3.958866] Adding 1005148k swap on /dev/zram0. Priority:5 extents:1 across:1005148k SS [ 3.963041] zram1: detected capacity change from 0 to 1029275648 [ 3.982713] Adding 1005148k swap on /dev/zram1. Priority:5 extents:1 across:1005148k SS [ 3.998616] zram2: detected capacity change from 0 to 1029275648 [ 4.024355] Adding 1005148k swap on /dev/zram2. Priority:5 extents:1 across:1005148k SS [ 4.032196] zram3: detected capacity change from 0 to 1029275648 [ 4.052016] Adding 1005148k swap on /dev/zram3. Priority:5 extents:1 across:1005148k SS [ 4.074996] tegra-usb-cd usb_cd: otg phy is not available yet [ 4.082845] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 4.184118] dhd_module_init in [ 4.184194] found wifi platform device bcmdhd_wlan [ 4.187802] wifi_platform_get_country_code_map: could not get country_code_map [ 4.187807] wifi_plat_dev_drv_probe:platform country code map is not available [ 4.187825] Power-up adapter 'DHD generic adapter' [ 4.187834] wifi_platform_set_power = 1 [ 4.392832] wifi_platform_bus_enumerate device present 1 [ 4.398520] tegra-usb-cd usb_cd: otg phy is not available yet [ 4.403978] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 4.413849] tegra-usb-cd usb_cd: otg phy is not available yet [ 4.420077] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 4.433348] wifi_platform_bus_enumerate device present 0 [ 4.434992] tegra-usb-cd usb_cd: otg phy is not available yet [ 4.436306] F1 signature read @0x18000000=0x17214354 [ 4.439577] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 4.471173] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 4.471983] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 4.472082] wifi_platform_get_mac_addr [ 4.481035] ids dhd_log_netlink_init [ 4.486512] wl_create_event_handler(): thread:wl_event_handler:1637 started [ 4.486515] wl_event_handler : [ 4.486519] tsk Enter, tsk = 0xffffffc1c68c1a90 [ 4.487935] dhd_attach(): thread:dhd_watchdog_thread:1639 started [ 4.488685] dhd_attach(): thread:dhd_dpc:163b started [ 4.489458] dhd_attach(): thread:dhd_rxf:1641 started [ 4.489466] dhd_deferred_work_init: work queue initialized [ 4.490151] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 4.490846] Register interface [wlan0] MAC: 00:04:4b:f1:f2:77 [ 4.490851] dhd_prot_ioctl : bus is down. we have nothing to do [ 4.490997] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 65 [ 4.492041] wifi_platform_set_power = 0 [ 4.698702] tegra-usb-cd usb_cd: otg phy is not available yet [ 4.703699] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 4.717080] tegra-usb-cd usb_cd: otg phy is not available yet [ 4.721839] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 4.911447] tegradc 15200000.nvdisplay: blank - powerdown [ 4.911456] tegradc 15210000.nvdisplay: blank - powerdown [ 5.898419] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5.898536] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 5.898545] wl_android_wifi_on in [ 5.898549] wifi_platform_set_power = 1 [ 6.108617] vdd-1v8: voltage operation not allowed [ 6.113439] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 6.140960] vdd-1v8: voltage operation not allowed [ 6.145774] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 6.169731] vdd-1v8: voltage operation not allowed [ 6.174574] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 6.183933] vdd-1v8: voltage operation not allowed [ 6.188816] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 6.295467] vdd-1v8: voltage operation not allowed [ 6.300305] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 6.307862] vdd-1v8: voltage operation not allowed [ 6.312731] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 6.320899] vdd-1v8: voltage operation not allowed [ 6.325730] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 6.332406] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 65 [ 6.332978] F1 signature read @0x18000000=0x17214354 [ 6.337346] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 6.337946] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 6.405474] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 6.469898] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 6.470151] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 6.470209] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 6.470211] Enabling wake69 [ 6.471414] wifi_platform_get_mac_addr [ 6.473049] Firmware up: op_mode=0x0005, MAC=00:04:4b:f1:f2:77 [ 6.477279] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ 6.477320] Skipping the clm download. len:0 memblk: (null) [ 6.479490] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 6.484284] Firmware version = wl0: Nov 6 2019 21:22:23 version 7.35.349.85 (r723239 CY) FWID 01-a59d25b5 [ 6.486607] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 6.576539] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : [ 6.576543] P2P interface registered [ 6.584875] WLC_E_IF: NO_IF set, event Ignored [ 6.594539] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.532495] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.532506] Bluetooth: BNEP socket layer initialized [ 7.974143] fuse init (API version 7.26) [ 8.404847] [08-17 12:21:36.347] wl_cfg80211_connect: Connectting with fc:ec:da:fe:d4:05 channel (48) ssid "Avular-wifi", len (11) [ 8.773992] [08-17 12:21:36.716] wl_notify_connect_status: wl_bss_connect_done succeeded with fc:ec:da:fe:d4:05 [ 8.775897] [08-17 12:21:36.718] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M1 of 4way [ 8.791801] wl_bss_connect_done : [ 8.791804] Report connect result - connection succeeded [ 8.792650] [08-17 12:21:36.735] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M2 of 4way [ 8.794884] [08-17 12:21:36.737] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M3 of 4way [ 8.795080] [08-17 12:21:36.737] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M4 of 4way [ 8.812289] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 8.851895] [08-17 12:21:36.794] wl_notify_connect_status: wl_bss_connect_done succeeded with fc:ec:da:fe:d4:05 [ 8.898018] dhd_ndo_add_ip: ndo ip addr add failed, ret = -23 [ 8.898030] dhd_inet6_work_handler: Adding host ip for NDO failed -23 [ 9.005033] ifidx:0 DHCP - REQUEST [TX] [ 9.352913] ifidx:0 DHCP - ACK [RX] [ 1114.891305] [08-17 12:40:03.225] wl_notify_connect_status: wl_bss_connect_done succeeded with fc:ec:da:fd:d4:05 [ 1114.897092] [08-17 12:40:03.231] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M1 of 4way [ 1114.963071] wl_bss_roaming_done : [ 1114.963093] wl_bss_roaming_done succeeded to fc:ec:da:fd:d4:05 (ch:6) [ 1114.974336] [08-17 12:40:03.308] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M2 of 4way [ 1114.978542] [08-17 12:40:03.312] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M3 of 4way [ 1114.978945] [08-17 12:40:03.312] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M4 of 4way [ 1488.889461] ifidx:0 DHCP - REQUEST [RX] [ 1726.502059] ifidx:0 DHCP - REQUEST [RX] [ 2065.226537] ifidx:0 DHCP - REQUEST [RX]