[application]
enable-perf-measurement=1
perf-measurement-interval-sec=5

[tiled-display]
enable=0

[source0]
enable=1
#Type - 1=CameraV4L2 2=URI 3=MultiURI 4=RTSP
type=4
uri=rtsp://127.0.0.1:8554/test
gpu-id=0
cudadec-memtype=0
#latency=200
rtsp-reconnect-interval-sec=5
udp-buffer-size=4000000
# Output video format for source
# NV12, I420, P010_10LE, BGRx, RGBA
#video-format=NV12
select-rtp-protocol=0

[sink0]
enable=1
#Type - 1=FakeSink 2=EglSink 3=File 4=RTSPStreaming
type=4
#1=h264 2=h265
codec=1
#encoder type 0=Hardware 1=Software
enc-type=0
sync=0
bitrate=4000000
#iframeinterval=1
#H264 Profile - 0=Baseline 2=Main 4=High
#H265 Profile - 0=Main 1=Main10
profile=0
# set below properties in case of RTSPStreaming
rtsp-port=8556
udp-port=5402
output-file=TI-small-drone-in-out-test1.mp4
source-id=0
qos=0
width=1920
height=1080
enc-type=0
udp-buffer-size=400000

[osd]
enable=1
gpu-id=0
border-width=5
text-size=15
text-color=1;1;1;1;
text-bg-color=0.3;0.3;0.3;1
font=Serif
show-clock=0
clock-x-offset=800
clock-y-offset=820
clock-text-size=12
clock-color=1;0;0;0
nvbuf-memory-type=0

[streammux]
gpu-id=0
##Boolean property to inform muxer that sources are live
live-source=1
batch-size=1
##time out in usec, to wait after the first buffer is available
##to push the batch even if the complete batch is not formed
# Calculation is: (1/max_fps) * 1000 * 1000
# Axis Max FPS = 30
batched-push-timeout=33333
# Speed-ER @ 25fps
#batched-push-timeout=40000
## Set muxer output width and height
# Effective Width/Height of Speed-ER
#width=768
#height=576
width=1920
height=1080
##Enable to maintain aspect ratio wrt source, and allow black borders, works
##along with width, height properties
enable-padding=1
nvbuf-memory-type=0
## If set to TRUE, system timestamp will be attached as ntp timestamp
## If set to FALSE, ntp timestamp from rtspsrc, if available, will be attached
#attach-sys-ts-as-ntp=1

[primary-gie]
enable=0
gpu-id=0
batch-size=1
gie-unique-id=1
nvbuf-memory-type=0
config-file=config_infer_test.txt

[tracker]
enable=0
# For NvDCF and DeepSORT tracker, tracker-width and tracker-height must be a multiple of 32, respectively
tracker-width=800
tracker-height=800
ll-lib-file=/opt/nvidia/deepstream/deepstream/lib/libnvds_nvmultiobjecttracker.so
# ll-config-file required to set different tracker types
ll-config-file=config_tracker_NvDCF_accuracyV2.yml
gpu-id=0
enable-batch-process=1
enable-past-frame=1
display-tracking-id=1

[tests]
file-loop=1