[ 2.833492] usbserial: USB Serial support registered for GSM modem (1-port) [ 2.833515] usbcore: registered new interface driver pl2303 [ 2.833529] usbserial: USB Serial support registered for pl2303 [ 2.833798] tegra-usb-cd usb_cd: otg phy is not available yet [ 2.834528] Console: switching to colour frame buffer device 80x30 [ 2.835888] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 2.961971] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 2.964528] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 2.964554] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.964752] i2c /dev entries driver [ 2.965537] gspca_main: v2.14.0 registered [ 2.965578] usbcore: registered new interface driver gspca_zc3xx [ 2.965834] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 2.967395] FAN: coudln't get the regulator [ 2.967790] device-mapper: uevent: version 1.0.3 [ 2.967963] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 2.968127] sdhci: Secure Digital Host Controller Interface driver [ 2.968128] sdhci: Copyright(c) Pierre Ossman [ 2.968133] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.968393] sdhci-tegra 3460000.sdhci: Parent select= pll_p rate=408000000 [ 2.968668] sdhci-tegra 3460000.sdhci: Parent select= pll_c4_out0 rate=196249804 [ 2.969096] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.969100] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 2.969493] hidraw: raw HID events driver (C) Jiri Kosina [ 2.971006] usbcore: registered new interface driver usbhid [ 2.971008] usbhid: USB HID core driver [ 2.971432] tegra-i2c 3160000.i2c: arb lost in communicate to add 0x40 [ 2.972152] tegra-i2c 3160000.i2c: Un-recovered Arb lost [ 2.972157] ina3221x 0-0040: ina3221 reset failure status: 0xfffffff5 [ 2.972293] ina3221x: probe of 0-0040 failed with error -11 [ 2.972556] tegra-i2c 3160000.i2c: arb lost in communicate to add 0x41 [ 2.972871] sdhci-tegra 3460000.sdhci: voltage switch failed in probe, err: -524 [ 2.973042] tegra-i2c 3160000.i2c: Un-recovered Arb lost [ 2.973046] ina3221x 0-0041: ina3221 reset failure status: 0xfffffff5 [ 2.973147] ina3221x: probe of 0-0041 failed with error -11 [ 2.973389] tegra-i2c 3160000.i2c: arb lost in communicate to add 0x42 [ 2.974035] tegra-i2c 3160000.i2c: Un-recovered Arb lost [ 2.974040] ina3221x 0-0042: ina3221 reset failure status: 0xfffffff5 [ 2.974138] ina3221x: probe of 0-0042 failed with error -11 [ 2.974372] tegra-i2c 3160000.i2c: arb lost in communicate to add 0x43 [ 2.975036] tegra-i2c 3160000.i2c: Un-recovered Arb lost [ 2.975040] ina3221x 0-0043: ina3221 reset failure status: 0xfffffff5 [ 2.975125] ina3221x: probe of 0-0043 failed with error -11 [ 2.975524] nvadsp 2993000.adsp: in probe()... [ 2.976659] nvadsp 2993000.adsp: Registering AMC Error Interrupt [ 2.976692] nvadsp 2993000.adsp: AMC/ARAM initialized. [ 2.976836] nvadsp 2993000.adsp: nvadsp_app_module_probe [ 2.977451] tegra_central_actmon d230000.actmon: in probe()... [ 2.980382] tegra_central_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.980799] kfuse 3830000.kfuse: initialized [ 2.992323] Denver: backdoor interface is NOT available. [ 2.993280] coresight-tmc 8030000.etf: TMC initialized [ 2.993567] coresight-tpiu 8060000.tpiu: TPIU initialized [ 2.993839] coresight-funnel 9010000.funnel_bccplex: FUNNEL initialized [ 2.994021] coresight-funnel 8010000.funnel_major: FUNNEL initialized [ 2.994359] coresight-replicator 8040000.replicator: REPLICATOR initialized [ 2.994748] coresight-etm4x 9840000.ptm: ETM 4.0 initialized [ 2.995086] coresight-etm4x 9940000.ptm: ETM 4.0 initialized [ 2.995418] coresight-etm4x 9a40000.ptm: ETM 4.0 initialized [ 2.995750] coresight-etm4x 9b40000.ptm: ETM 4.0 initialized [ 2.995772] Module initialized successfully [ 2.999207] camchar: rtcpu character device driver loaded [ 3.000921] tegra186-aondbg aondbg: aondbg driver probe() OK [ 3.001047] register_ari_mca_banks: Registered MCA ROC:IOB [ 3.001113] register_ari_mca_banks: Registered MCA ROC:CCE [ 3.001677] **** A57 ECC: Enabled [ 3.001679] tegra18_a57_serr_init: on CPU 4 a A57 Core [ 3.001804] parse_throttle_dt_data: Num cap clks = 4 [ 3.001807] parse_throttle_dt_data: clk=mcpu type=1 [ 3.001809] parse_throttle_dt_data: clk=bcpu type=2 [ 3.001813] parse_throttle_dt_data: clk=gpu type=4 [ 3.001815] parse_throttle_dt_data: clk=emc type=3 [ 3.002239] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.008119] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 3.008527] Adding domain se-pd to PM domain host-pd [ 3.009692] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.009925] sdhci-tegra 3440000.sdhci: Parent select= pll_p rate=408000000 [ 3.010202] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 3.012093] sdhci-tegra 3440000.sdhci: voltage switch failed in probe, err: -524 [ 3.017694] pad_id 28: PMC_IMPL_E_33V_PWR_0 = [0x39] [ 3.017695] ata1: SATA link down (SStatus 0 SControl 300) [ 3.045679] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.045887] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 3.045934] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 3.046014] sdhci-tegra 3400000.sdhci: Parent select= pll_p rate=408000000 [ 3.046102] sdhci-tegra 3400000.sdhci: wakeup init done, cd_irq: 247 [ 3.046313] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 3.048193] sdhci-tegra 3400000.sdhci: voltage switch failed in probe, err: -524 [ 3.083656] mmc0: MAN_BKOPS_EN bit is not set [ 3.085723] gpio tegra-gpio wake71 for gpio=125(P:6) [ 3.085756] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.090872] mmc0: Skipping tuning since strobe enabled [ 3.098245] mmc0: periodic cache flush enabled [ 3.098253] mmc0: new HS400 MMC card at address 0001 [ 3.098536] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 3.098660] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 3.099758] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 3.134082] pad_id 28: PMC_IMPL_E_33V_PWR_0 = [0x39] [ 3.134082] mmc1: queuing unknown CIS tuple 0x80 (5 bytes) [ 3.331709] mmc1 tuning done saved tap delay=19 [ 3.331713] mmc1: hw tuning done ... [ 3.331720] mmc1: tuning_window[0]: 0xffffffff [ 3.331726] mmc1: tuning_window[1]: 0xfffff8ff [ 3.331731] mmc1: tuning_window[2]: 0xffc7ffff [ 3.331735] mmc1: tuning_window[3]: 0x1fffffff [ 3.331739] mmc1: tuning_window[4]: 0x0 [ 3.331771] mmc1: tuning_window[5]: 0x0 [ 3.331775] mmc1: tuning_window[6]: 0x0 [ 3.331779] mmc1: tuning_window[7]: 0x0 [ 3.331782] sdhci: Tap value: 19 | Trim value: 5 [ 3.331786] sdhci: SDMMC_VENDOR_INTR_STATUS[0x108]: 0x40000 [ 3.337916] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.337962] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 3.691465] tegradc 15210000.nvdisplay: fb registered [ 3.697231] gpio tegra-gpio wake21 for gpio=121(P:2) [ 3.703887] tegra-se-nvhost 15810000.se: initialized [ 3.710053] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 3.717282] tegra-se-nvhost 15820000.se: initialized [ 3.723331] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 3.730505] tegra-se-nvhost 15830000.se: initialized [ 3.736500] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 3.743568] tegra-se-nvhost 15840000.se: initialized [ 3.749500] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 3.759413] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 3.769213] cpufreq: platform driver Initialization: pass [ 3.775401] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 3.785888] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 3.796203] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x32b894 [ 3.803739] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x8 [ 3.812210] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ 3.821096] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 0 not supported [ 3.830541] cpuidle: Initializing cpuidle driver init for Denver cluster [ 3.832963] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b a5 db 61 [ 3.833404] libphy: dwc_phy: probed [ 3.848797] cpuidle: Initializing cpuidle driver init for A57 cluster [ 3.856887] tachometer tegra-tachometer: Tachometer driver tegra-tachometer registered [ 3.865725] Tachometer driver initialized with pulse_per_rev: 1 and win_len: 1 [ 3.878078] tegra210_adsp_audio_platform_probe: platform probe started [ 3.889786] tegra210-adsp adsp_audio: Default param-type to BYTE for mp3-dec1 [ 3.890669] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 3.890809] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 3.902910] gpio tegra-gpio wake18 for gpio=101(M:3) [ 3.903081] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 3.930166] tegra210-adsp adsp_audio: Default param-type to BYTE for spkprot [ 3.938296] tegra210-adsp adsp_audio: Default param-type to BYTE for src [ 3.945908] tegra210-adsp adsp_audio: Default param-type to BYTE for aac-dec1 [ 3.953990] tegra210-adsp adsp_audio: Default param-type to BYTE for aec [ 3.961182] tegra210-adsp adsp_audio: adma channel page address dt entry not found [ 3.969693] tegra210-adsp adsp_audio: using adma channel page 0 [ 3.976200] tegra210_adsp_audio_platform_probe probe successfull. [ 3.993303] OPE platform probe [ 3.997741] OPE platform probe successful [ 4.016874] tegra-snd-t186ref-mobile-rt565x sound: Failed to get HP Det GPIO, should be handled by codec [ 4.102074] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 4.110793] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 4.119388] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 4.127958] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 4.136559] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 4.145173] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 4.153823] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 4.162521] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 4.171706] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 4.180509] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 4.189471] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 4.198497] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 4.207533] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 4.216566] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 4.225596] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 4.234626] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 4.243664] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 4.252697] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 4.261732] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 4.270748] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 4.280896] tegra-snd-t186ref-mobile-rt565x sound: ADSP-FE1 <-> ADSP PCM1 mapping ok [ 4.290005] tegra-snd-t186ref-mobile-rt565x sound: ADSP-FE2 <-> ADSP PCM2 mapping ok [ 4.299023] compress asoc: ADSP-FE3 <-> ADSP COMPR1 mapping ok [ 4.305514] compress asoc: ADSP-FE4 <-> ADSP COMPR2 mapping ok [ 4.345844] input: tegra-snd-t186ref-mobile-rt565x Headphone Jack as /devices/sound/sound/card1/input2 [ 4.357115] tegra-snd-t186ref-mobile-rt565x sound: codec-dai "dit-hifi" registered [ 4.365908] tegra-snd-t186ref-mobile-rt565x sound: This is a dummy codec [ 4.373618] GACT probability NOT on [ 4.377719] Mirror/redirect action on [ 4.381972] u32 classifier [ 4.385228] Actions configured [ 4.389213] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 4.396593] Initializing XFRM netlink socket [ 4.401741] NET: Registered protocol family 10 [ 4.407535] NET: Registered protocol family 17 [ 4.412546] NET: Registered protocol family 15 [ 4.417487] 8021q: 802.1Q VLAN Support v1.8 [ 4.422370] Registered cp15_barrier emulation handler [ 4.427899] Registered setend emulation handler [ 4.434215] registered taskstats version 1 [ 4.439415] Adding domain ispa-pd to PM domain host-pd [ 4.447730] isp 15600000.isp: initialized [ 4.452615] Adding domain ve-pd to PM domain host-pd [ 4.460782] nvcsi 150c0000.nvcsi: initialized [ 4.467381] Wake76 for irq=199 [ 4.471111] Wake77 for irq=199 [ 4.474804] Wake78 for irq=199 [ 4.478453] Wake79 for irq=199 [ 4.482063] Wake80 for irq=199 [ 4.485633] Wake81 for irq=199 [ 4.489162] Wake82 for irq=199 [ 4.492890] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 4.499654] spi-tegra114 3210000.spi: Static pin configuration used [ 4.506974] spi-tegra114 c260000.spi: Static pin configuration used [ 4.514324] spi-tegra114 3240000.spi: Static pin configuration used [ 4.521488] tegra-usb-cd usb_cd: otg phy is not available yet [ 4.529026] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 4.539243] tegra186-cam-rtcpu b000000.rtcpu: booting sce with Camera RTCPU FW [ 4.547418] tegra186-cam-rtcpu b000000.rtcpu: sce gets unhalted [ 4.555530] tegra-camera-rtcpu-character-device ivc-b000000.rtcpu:echo@0: probing /dev/camchar-echo [ 4.566471] tegra-camera-rtcpu-character-device ivc-b000000.rtcpu:dbg@7c00: probing /dev/camchar-dbg [ 4.576556] tegra186-cam-rtcpu b000000.rtcpu: enabling tracing [ 4.582838] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 4.591569] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=2 ivc=2 sha1=fb16914d17f56e81ad21e716791045b9ac83064a [ 4.604266] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 4.614638] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 4.624756] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x32b894 [ 4.632151] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x8 [ 4.639877] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ 4.649892] Wake76 for irq=199 [ 4.653483] Wake77 for irq=199 [ 4.657019] Wake78 for irq=199 [ 4.660555] Wake79 for irq=199 [ 4.664073] Wake80 for irq=199 [ 4.667576] Wake81 for irq=199 [ 4.671064] Wake82 for irq=199 [ 4.674787] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 4.681536] tegra-usb-cd usb_cd: otg phy is not available yet [ 4.689092] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 4.697002] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 4.703141] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 4.709195] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 4.715253] input: gpio-keys as /devices/gpio-keys/input/input3 [ 4.722153] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 4.732460] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 4.742457] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x32b894 [ 4.749726] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x8 [ 4.756537] tegra_rtc c2a0000.rtc: setting system clock to 2019-01-03 09:51:17 UTC (1546509077) [ 4.771286] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ 4.771576] tegra-vi4 15700000.vi: initialized [ 4.785366] Wake76 for irq=199 [ 4.786780] bpmp: mounted debugfs mirror [ 4.787125] [dram-timers] DRAM derating cdev registered. [ 4.789923] outp: disabling [ 4.789926] outn: disabling [ 4.789932] spmic-ldo0: disabling [ 4.790118] spmic-ldo1: disabling [ 4.790253] en-vdd-sd: disabling [ 4.790255] vdd-usb0-5v: disabling [ 4.790256] vdd-usb1-5v: disabling [ 4.790258] vdd-3v3: disabling [ 4.790259] en-vdd-vcm-2v8: disabling [ 4.790260] vdd-sys-bl: disabling [ 4.796224] ALSA device list: [ 4.796226] #0: tegra-hda at 0x3518000 irq 391 [ 4.796227] #1: tegra-snd-t186ref-mobile-rt565x [ 4.848883] Wake77 for irq=199 [ 4.848885] Wake78 for irq=199 [ 4.848886] Wake79 for irq=199 [ 4.848887] Wake80 for irq=199 [ 4.848894] Wake81 for irq=199 [ 4.848895] Wake82 for irq=199 [ 4.849128] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 4.849366] tegra-usb-cd usb_cd: otg phy is not available yet [ 4.853364] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 4.856323] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 4.856329] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 4.856355] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x32b894 [ 4.856358] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x8 [ 4.870155] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ 4.932979] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 4.943066] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 4.957992] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.966967] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 4.976269] devtmpfs: mounted [ 4.980080] Freeing unused kernel memory: 1132K (ffffffc000fba000 - ffffffc0010d5000) [ 4.988875] Freeing alternatives memory: 92K (ffffffc0010d5000 - ffffffc0010ec000) [ 5.068682] random: systemd urandom read with 102 bits of entropy available [ 5.078412] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 5.098794] systemd[1]: Detected architecture arm64. [ 5.114631] systemd[1]: Set hostname to . [ 5.229359] systemd[1]: Reached target Remote File Systems (Pre). [ 5.245800] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.261733] systemd[1]: Reached target Encrypted Volumes. [ 5.277769] systemd[1]: Listening on udev Kernel Socket. [ 5.293794] systemd[1]: Listening on Journal Socket. [ 5.305742] systemd[1]: Reached target Swap. [ 5.317833] systemd[1]: Listening on Journal Audit Socket. [ 5.333806] systemd[1]: Created slice User and Session Slice. [ 5.349793] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.369737] systemd[1]: Reached target User and Group Name Lookups. [ 5.385733] systemd[1]: Reached target Remote File Systems. [ 5.401751] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.417758] systemd[1]: Listening on Syslog Socket. [ 5.429818] systemd[1]: Listening on udev Control Socket. [ 5.445800] systemd[1]: Created slice System Slice. [ 5.474065] systemd[1]: Starting Journal Service... [ 5.486897] systemd[1]: Started Braille Device Support. [ 5.503323] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.518730] systemd[1]: Mounting Debug File System... [ 5.529870] systemd[1]: Created slice system-getty.slice. [ 5.561919] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.584604] systemd[1]: Starting Load Kernel Modules... [ 5.591690] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 5.602359] Wake76 for irq=199 [ 5.606077] Wake77 for irq=199 [ 5.609752] Wake78 for irq=199 [ 5.613408] Wake79 for irq=199 [ 5.617054] Wake80 for irq=199 [ 5.620686] Wake81 for irq=199 [ 5.624299] Wake82 for irq=199 [ 5.628217] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 5.634930] systemd[1]: Reached target Slices. [ 5.635123] tegra-usb-cd usb_cd: otg phy is not available yet [ 5.636431] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 5.636758] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 5.636764] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 5.636798] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x32b894 [ 5.636800] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x8 [ 5.637363] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ 5.701848] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 5.730540] systemd[1]: Mounted Debug File System. [ 5.741851] systemd[1]: Started Journal Service. [ 5.789681] random: nonblocking pool is initialized [ 5.925431] systemd-journald[201]: Received request to flush runtime journal from PID 1 [ 6.087371] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 6.103942] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 6.118286] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 6.129175] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 6.263841] dhd_module_init in [ 6.263874] tegra_net_perf_init: cannot get wifi sclk [ 6.270121] found wifi platform device bcmdhd_wlan [ 6.271230] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 6.277928] wifi_platform_get_country_code_map: could not get country_code_map [ 6.277930] wifi_plat_dev_drv_probe:platform country code map is not available [ 6.277940] Power-up adapter 'DHD generic adapter' [ 6.279533] wifi_platform_set_power = 1 [ 6.281386] Wake76 for irq=199 [ 6.285364] Wake77 for irq=199 [ 6.285367] Wake78 for irq=199 [ 6.285368] Wake79 for irq=199 [ 6.285369] Wake80 for irq=199 [ 6.285369] Wake81 for irq=199 [ 6.285370] Wake82 for irq=199 [ 6.286135] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 6.286607] tegra-usb-cd usb_cd: otg phy is not available yet [ 6.287181] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 6.287369] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 6.287374] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 6.287407] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x32b894 [ 6.287409] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x8 [ 6.287984] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ 6.481684] wifi_platform_bus_enumerate device present 1 [ 6.499112] wifi_platform_bus_enumerate device present 0 [ 6.499398] F1 signature read @0x18000000=0x17214354 [ 6.500750] Wake76 for irq=199 [ 6.502229] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 6.502606] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 6.502649] wifi_platform_prealloc: failed to alloc static mem section 7 [ 6.502655] wifi_platform_get_mac_addr [ 6.504040] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211 [ 6.504362] wl_create_event_handler(): thread:wl_event_handler:1a2 started [ 6.504518] CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xffffffc1eb161a70 [ 6.504533] dhd_attach(): thread:dhd_watchdog_thread:1a3 started [ 6.504574] dhd_attach(): thread:dhd_dpc:1a4 started [ 6.504617] dhd_attach(): thread:dhd_rxf:1a5 started [ 6.504621] dhd_deferred_work_init: work queue initialized [ 6.504753] Dongle Host Driver, version 1.201.82 (r) Compiled in drivers/net/wireless/bcmdhd on Mar 1 2017 at 21:08:04 [ 6.505009] tegra_sysfs_register [ 6.505036] Register interface [wlan0] MAC: 00:04:4b:a5:db:5f [ 6.505039] dhd_prot_ioctl : bus is down. we have nothing to do [ 6.505116] sdhci-tegra 3440000.sdhci: Tuning already done, restoring the best tap value : 19 [ 6.506148] wifi_platform_set_power = 0 [ 6.535015] Wake77 for irq=199 [ 6.538891] Wake78 for irq=199 [ 6.542741] Wake79 for irq=199 [ 6.546529] Wake80 for irq=199 [ 6.550278] Wake81 for irq=199 [ 6.554003] Wake82 for irq=199 [ 6.558050] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 6.565243] tegra-usb-cd usb_cd: otg phy is not available yet [ 6.572530] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 6.579709] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 6.591069] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 6.602798] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 6.613629] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x32b894 [ 6.624013] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x8 [ 6.632287] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ 6.711619] Wake76 for irq=199 [ 6.715758] Wake77 for irq=199 [ 6.719648] Wake78 for irq=199 [ 6.723561] Wake79 for irq=199 [ 6.727451] Wake80 for irq=199 [ 6.731298] Wake81 for irq=199 [ 6.735038] Wake82 for irq=199 [ 6.741417] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 6.750791] tegra-usb-cd usb_cd: otg phy is not available yet [ 6.760659] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 6.769113] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 6.779996] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 6.793569] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x32b894 [ 6.802171] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x8 [ 6.810242] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ 6.987713] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 7.202121] Bluetooth: Core ver 2.21 [ 7.206694] NET: Registered protocol family 31 [ 7.212064] Bluetooth: HCI device and connection manager initialized [ 7.212072] Bluetooth: HCI socket layer initialized [ 7.212076] Bluetooth: L2CAP socket layer initialized [ 7.212092] Bluetooth: SCO socket layer initialized [ 7.318692] gk20a 17000000.gp10b: railgate is disabled. [ 7.407716] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 7.421400] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 7.429697] CPU1: shutdown [ 7.434204] psci: CPU1 killed. [ 7.445710] CPU2: shutdown [ 7.450761] psci: CPU2 killed. [ 7.666103] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.673236] Dongle Host Driver, version 1.201.82 (r) Compiled in drivers/net/wireless/bcmdhd on Mar 1 2017 at 21:08:04 [ 7.673244] wl_android_wifi_on in [ 7.673247] wifi_platform_set_power = 1 [ 7.834001] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 7.878822] pad_id 28: PMC_IMPL_E_33V_PWR_0 = [0x39] [ 7.925872] pad_id 28: PMC_IMPL_E_33V_PWR_0 = [0x39] [ 7.958294] mmc1: queuing unknown CIS tuple 0x80 (5 bytes) [ 7.967944] tegradc 15210000.nvdisplay: blank - powerdown [ 8.029416] sdhci-tegra 3440000.sdhci: Tuning already done, restoring the best tap value : 19 [ 8.038293] F1 signature read @0x18000000=0x17214354 [ 8.041199] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 8.041653] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 8.088204] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 8.149750] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 8.150010] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 8.155379] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 8.160681] Enabling wake69 [ 8.166128] wifi_platform_get_mac_addr [ 8.167503] Firmware up: op_mode=0x0005, MAC=00:04:4b:a5:db:5f [ 8.172703] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 8.176939] Firmware version = wl0: Feb 4 2017 14:39:11 version 7.35.221.11 (r623264) FWID 01-5b44953 [ 8.179010] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 8.179159] tegra_sysfs_on [ 8.241957] cfg80211: World regulatory domain updated: [ 8.247149] cfg80211: DFS Master region: unset [ 8.249677] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 8.258098] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 8.267886] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8.275916] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8.283938] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 8.291943] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 8.301430] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 8.310907] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 8.318994] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 8.327006] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 8.335364] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.406953] gpio tegra-gpio wake18 for gpio=101(M:3) [ 8.416519] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.525251] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : P2P interface registered [ 8.541023] WLC_E_IF: NO_IF set, event Ignored [ 8.561903] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.621149] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.651688] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 8.660241] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 8.661191] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.674438] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 8.682019] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 8.692632] Wake76 for irq=199 [ 8.695686] Wake77 for irq=199 [ 8.698666] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.701117] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.704995] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.721641] Wake78 for irq=199 [ 8.724685] Wake79 for irq=199 [ 8.727729] Wake80 for irq=199 [ 8.730774] Wake81 for irq=199 [ 8.732301] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.734663] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.741357] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.756729] Wake82 for irq=199 [ 8.760138] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 8.766508] tegra-usb-cd usb_cd: otg phy is not available yet [ 8.773977] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 8.775296] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.788816] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 8.798332] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 8.807515] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x32b894 [ 8.814411] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x8 [ 8.821975] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ 8.864197] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.869550] Bluetooth: BNEP socket layer initialized [ 9.796763] fuse init (API version 7.23) [ 12.251294] eqos 2490000.ether_qos eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 12.272423] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready