[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (david@linux-002) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu May 28 10:48:17 CEST 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00800000@92cb0000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefc2000 s61592 r8192 d32616 u102400 [ 0.000000] pcpu-alloc: s61592 r8192 d32616 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 tegra_fbmem=0x800000@0x92cb0000 is_hdmi_initialised=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 quiet [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29336(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3562160K/4159488K available (15294K kernel code, 2934K rwdata, 6652K rodata, 8576K init, 609K bss, 122192K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a13d808 - 0xffffff800a1d5dbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001704] Console: colour dummy device 80x25 [ 0.001725] console [tty0] enabled [ 0.001743] kmemleak: Kernel memory leak detector disabled [ 0.001764] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001779] pid_max: default: 32768 minimum: 301 [ 0.002226] Security Framework initialized [ 0.002450] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002459] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003625] ftrace: allocating 47050 entries in 184 pages [ 0.175325] sched-energy: CPU device node has no sched-energy-costs [ 0.175361] ASID allocator initialised with 65536 entries [ 0.212306] tegra-id: chipid=22117. [ 0.212319] tegra-id: opt_subrevision=0. [ 0.212337] Tegra Speedo/IDDQ fuse revision 4 [ 0.212341] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.212346] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.212354] Tegra: CPU Speedo Value 2084, SoC Speedo Value 1960, GPU Speedo Value 2068 [ 0.212359] Tegra: CPU IDDQ Value 2136, SoC IDDQ Value 2260, GPU IDDQ Value 2810 [ 0.212378] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.212393] DTS File Name: /home/david/nvidia/sources/kernel/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-panocam_nx-0000-v01.dts [ 0.212401] DTB Build time: May 28 2020 12:59:37 [ 0.261094] CPU1: Booted secondary processor [411fd071] [ 0.292998] CPU2: Booted secondary processor [411fd071] [ 0.324970] CPU3: Booted secondary processor [411fd071] [ 0.325059] Brought up 4 CPUs [ 0.325066] SMP: Total of 4 processors activated. [ 0.325075] CPU features: detected feature: 32-bit EL0 Support [ 0.325340] CPU: All CPU(s) started at EL2 [ 0.325358] alternatives: patching kernel code [ 0.333723] devtmpfs: initialized [ 0.372124] Initilizing CustomIPI irq domain [ 0.372519] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.372541] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.384006] pinctrl core: initialized pinctrl subsystem [ 0.384704] OS set in device tree is not L4T. [ 0.385232] regulator-dummy: no parameters [ 0.385542] Initializing plugin-manager [ 0.385657] Plugin module not found [ 0.389423] NET: Registered protocol family 16 [ 0.391939] pstore: using zlib compression [ 0.391976] console [pstore-1] enabled [ 0.391980] pstore: Registered ramoops as persistent store backend [ 0.391986] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.405108] cpuidle: using governor menu [ 0.409337] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.410884] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000) [ 0.410906] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.413682] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.416172] tegra_powergate_init: DONE [ 0.416191] DTS File Name: /home/david/nvidia/sources/kernel/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-panocam_nx-0000-v01.dts [ 0.416197] DTB Build time: May 28 2020 12:59:37 [ 0.417917] Tegra reboot handler registered. [ 0.422383] iommu: Adding device tegra-carveouts to group 0 [ 0.422525] platform tegra-carveouts: domain=ffffffc0f942d318 allocates as[0]=ffffffc0f94280a8 [ 0.422888] iommu: Adding device smmu_test to group 1 [ 0.422932] platform smmu_test: domain=ffffffc0f942d558 allocates as[0]=ffffffc0f9428110 [ 0.423757] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.423809] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.423866] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.423876] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.423897] mc-err: mcerr ops are set to t21x [ 0.433721] iommu: Adding device 70090000.xusb to group 2 [ 0.434007] iommu: Adding device 70006000.serial to group 3 [ 0.434096] platform 70006000.serial: domain=ffffffc0f9437618 allocates as[0]=ffffffc0f9428178 [ 0.434521] iommu: Adding device 70006040.serial to group 4 [ 0.434792] iommu: Adding device 70006200.serial to group 5 [ 0.435020] iommu: Adding device sound to group 6 [ 0.435065] platform sound: domain=ffffffc0f9437b58 allocates as[0]=ffffffc0f94281e0 [ 0.435626] iommu: Adding device 7000d400.spi to group 7 [ 0.435874] iommu: Adding device 7000d600.spi to group 8 [ 0.436209] iommu: Adding device 50000000.host1x to group 9 [ 0.436481] iommu: Adding device 54080000.vi to group 10 [ 0.436881] iommu: Adding device 54600000.isp to group 11 [ 0.437326] iommu: Adding device 54680000.isp to group 12 [ 0.437618] iommu: Adding device tegradc.0 to group 13 [ 0.437698] platform tegradc.0: domain=ffffffc0f94a7918 allocates as[0]=ffffffc0f9428248 [ 0.441898] platform tegradc.0: IOVA linear map 0x0000000092cb0000(800000) [ 0.442292] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.442620] iommu: Adding device tegradc.1 to group 14 [ 0.442670] platform tegradc.1: domain=ffffffc0f94a7b58 allocates as[0]=ffffffc0f94282b0 [ 0.446842] platform tegradc.1: IOVA linear map 0x0000000092cb0000(800000) [ 0.447234] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.447477] iommu: Adding device 54340000.vic to group 15 [ 0.447683] iommu: Adding device 544c0000.nvenc to group 16 [ 0.447878] iommu: Adding device 54500000.tsec to group 17 [ 0.448074] iommu: Adding device 54100000.tsecb to group 18 [ 0.448286] iommu: Adding device 54480000.nvdec to group 19 [ 0.448476] iommu: Adding device 54380000.nvjpg to group 20 [ 0.449573] iommu: Adding device 546c0000.i2c to group 21 [ 0.449905] iommu: Adding device 57000000.gpu to group 22 [ 0.449956] platform 57000000.gpu: domain=ffffffc0f94b5b58 allocates as[0]=ffffffc0f9428318 [ 0.449997] platform 57000000.gpu: domain=ffffffc0f94b5b58 allocates as[1]=ffffffc0f9428380 [ 0.450038] platform 57000000.gpu: domain=ffffffc0f94b5b58 allocates as[2]=ffffffc0f94283e8 [ 0.450076] platform 57000000.gpu: domain=ffffffc0f94b5b58 allocates as[3]=ffffffc0f9428450 [ 0.450999] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.451011] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.451021] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.451025] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.451029] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.501172] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.501180] tegra-pmc: Clear bootloader IO dpd settings [ 0.501199] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.501272] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.501574] iommu: Adding device 70012000.se to group 23 [ 0.502355] iommu: Adding device 7000c000.i2c to group 24 [ 0.502620] iommu: Adding device 7000c400.i2c to group 25 [ 0.502867] iommu: Adding device 7000c500.i2c to group 26 [ 0.503127] iommu: Adding device 7000c700.i2c to group 27 [ 0.503377] iommu: Adding device 7000d000.i2c to group 28 [ 0.503662] iommu: Adding device 7000d100.i2c to group 29 [ 0.503934] iommu: Adding device sdhci-tegra.3 to group 30 [ 0.503990] platform sdhci-tegra.3: domain=ffffffc0f954dcd8 allocates as[0]=ffffffc0f94284b8 [ 0.504849] iommu: Adding device 700d0000.xudc to group 31 [ 0.508127] vdd-ac-bat: 5000 mV [ 0.508482] vdd-5v0-sys: 5000 mV [ 0.509482] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.509554] vdd-5v0-hdmi: 5000 mV [ 0.509973] vdd-1v8-sys: 1800 mV [ 0.510370] vdd-fan: supplied by vdd-5v0-sys [ 0.510405] vdd-fan: 5000 mV [ 0.510793] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.510848] vdd-usb-vbus: 5000 mV [ 0.511401] vdd-usb-vbus2: 5000 mV [ 0.542134] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.544680] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.545766] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.545786] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.545822] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.546195] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.554070] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.554411] SCSI subsystem initialized [ 0.554636] libata version 3.00 loaded. [ 0.554926] usbcore: registered new interface driver usbfs [ 0.554977] usbcore: registered new interface driver hub [ 0.555049] usbcore: registered new device driver usb [ 0.561605] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.564831] random: fast init done [ 0.572730] vdd-core: 1000 <--> 1162 mV at 1075 mV [ 0.575231] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.580235] vdd-ddr-1v1: 1150 mV [ 0.584241] vdd-pre-reg-1v35: 1350 mV [ 0.588237] vdd-1v8: 1800 mV [ 0.592243] avdd-sys-1v2: 1200 mV [ 0.596236] vdd-pex-1v0: 1050 mV [ 0.598013] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.599316] max77620-ldo3: at 3100 mV [ 0.604239] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.605540] max77620-ldo5: at 3100 mV [ 0.608242] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.612236] avdd-1v05-pll: 1050 mV [ 0.616240] avdd-io-hdmi-dp: 1050 mV [ 0.624268] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.624618] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.625039] max77620 4-003c: max77620 probe successful [ 0.627834] media: Linux media interface: v0.10 [ 0.627892] Linux video capture interface: v2.00 [ 0.628880] pps_core: LinuxPPS API ver. 1 registered [ 0.628888] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.628990] PTP clock support registered [ 0.632745] tegra_fiq_debugger_init: found FIQ source (IRQ 97) [ 0.639188] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.639962] Advanced Linux Sound Architecture Driver Initialized. [ 0.640663] Bluetooth: Core ver 2.22 [ 0.640735] NET: Registered protocol family 31 [ 0.640739] Bluetooth: HCI device and connection manager initialized [ 0.640754] Bluetooth: HCI socket layer initialized [ 0.640764] Bluetooth: L2CAP socket layer initialized [ 0.640789] Bluetooth: SCO socket layer initialized [ 0.642640] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.642656] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.642699] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.642713] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.645660] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.648655] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.648744] vdd-3v3-sys: 3300 mV [ 0.649029] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.652299] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.652756] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.652796] vdd-3v3-sd: 3300 mV [ 0.654856] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.654898] avdd-io-edp-1v05: 1050 mV [ 0.655351] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.655388] vdd-usb-hub-en: 5000 mV [ 0.656818] camchar: rtcpu character device driver loaded [ 0.657550] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1 [ 0.658971] clocksource: Switched to clocksource arch_sys_counter [ 0.699712] VFS: Disk quotas dquot_6.6.0 [ 0.699841] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.700333] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.700758] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.700776] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.700986] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.700992] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.701005] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.701041] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.701047] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.701060] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.701067] nvmap_page_pool_init: Total RAM pages: 1009324 [ 0.701073] nvmap_page_pool_init: nvmap page pool size: 126165 pages (492 MB) [ 0.701173] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.701573] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.702353] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.712368] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.712780] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.713035] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.713271] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.713464] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.713735] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.713739] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.714173] NET: Registered protocol family 2 [ 0.715192] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.715402] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.715941] TCP: Hash tables configured (established 32768 bind 32768) [ 0.716099] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.716179] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.716594] NET: Registered protocol family 1 [ 0.717387] RPC: Registered named UNIX socket transport module. [ 0.717394] RPC: Registered udp transport module. [ 0.717397] RPC: Registered tcp transport module. [ 0.717401] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.717414] PCI: CLS 0 bytes, default 64 [ 0.717661] Trying to unpack rootfs image as initramfs... [ 0.951745] Freeing initrd memory: 5356K [ 0.961584] host1x 50000000.host1x: initialized [ 0.963470] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.966765] audit: initializing netlink subsys (disabled) [ 0.966836] audit: type=2000 audit(0.815:1): initialized [ 0.967658] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.977740] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.979417] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.980245] 9p: Installing v9fs 9p2000 file system support [ 0.983494] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.983635] io scheduler noop registered [ 0.983929] io scheduler cfq registered (default) [ 0.986685] gic 702f9000.agic: GIC IRQ controller registered [ 0.989729] iommu: Adding device 702ef000.adsp to group 32 [ 0.998917] iommu: Adding device aconnect@702c0000:adsp_audio to group 33 [ 0.999096] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.999691] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x89e8412 [ 0.999699] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.001370] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.001481] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.001572] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.001760] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.001847] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.001942] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.002023] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.002114] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.002201] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.002289] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.018806] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.020494] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.022399] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.023779] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.024146] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.025376] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.025598] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=3000000, max_bw=3000000 [ 1.025825] Adding domain tsec-pd to PM domain host1x-pd [ 1.027965] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.028886] tsec 54500000.tsec: initialized [ 1.030421] tsec 54100000.tsecb: initialized [ 1.031136] Adding domain nvdec-pd to PM domain host1x-pd [ 1.034372] nvdec 54480000.nvdec: initialized [ 1.035443] Adding domain vic03-pd to PM domain host1x-pd [ 1.035618] Adding domain msenc-pd to PM domain host1x-pd [ 1.035776] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.039764] falcon 54340000.vic: initialized [ 1.040979] falcon 544c0000.nvenc: initialized [ 1.042243] falcon 54380000.nvjpg: initialized [ 1.046503] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=96 [ 1.046544] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.046579] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.046761] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.046865] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.046870] tegra_cec 70015000.tegra_cec: probed [ 1.046883] display board info: id 0x0, fab 0x0 [ 1.047121] generic_infoframe_type: 0x87 [ 1.047276] tegradc tegradc.0: DT parsed successfully [ 1.047323] tegradc tegradc.0: Display dc.ffffff800ab80000 registered with id=0 [ 1.047862] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781 [ 1.055354] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.055692] tegradc tegradc.0: probed [ 1.060983] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 1.060991] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.060997] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 1.061002] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 1.061008] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.061035] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400 [ 1.061110] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.061314] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 1.061388] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.061580] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.061589] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.061724] pci 0000:01:00.0: [12d8:2608] type 01 class 0x060400 [ 1.061853] pci 0000:01:00.0: supports D1 D2 [ 1.061858] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.063130] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.063616] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.063861] kfuse 7000fc00.kfuse: initialized [ 1.064499] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.065165] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.065820] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.065828] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.066150] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.069367] vdd-gpu: applied init 1000000uV constraint [ 1.069373] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.069693] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.071037] pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.071194] pci 0000:02:01.0: [12d8:2608] type 01 class 0x060400 [ 1.071326] pci 0000:02:01.0: supports D1 D2 [ 1.071329] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.071547] pci 0000:02:02.0: [12d8:2608] type 01 class 0x060400 [ 1.071670] pci 0000:02:02.0: supports D1 D2 [ 1.071674] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.071879] pci 0000:02:03.0: [12d8:2608] type 01 class 0x060400 [ 1.072001] pci 0000:02:03.0: supports D1 D2 [ 1.072005] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.072205] pci 0000:02:04.0: [12d8:2608] type 01 class 0x060400 [ 1.072326] pci 0000:02:04.0: supports D1 D2 [ 1.072330] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.072632] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.072643] pci 0000:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.072652] pci 0000:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.072662] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.072781] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03 [ 1.072826] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.072897] No Device Node present for smmu client: serial8250 !! [ 1.072903] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.072912] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04 [ 1.072927] iommu: Adding device serial8250 to group 34 [ 1.073028] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05 [ 1.073169] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06 [ 1.073177] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 06 [ 1.073185] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 06 [ 1.073329] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000 [ 1.073351] pci 0000:07:00.0: reg 0x10: [io 0x0000-0x00ff] [ 1.073378] pci 0000:07:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 1.073396] pci 0000:07:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.073506] pci 0000:07:00.0: supports D1 D2 [ 1.073510] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.074096] Console: switching to colour frame buffer device 240x67 [ 1.074210] tegradc tegradc.0: fb registered [ 1.074599] console [ttyS0] disabled [ 1.074628] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.074663] console [ttyS0] enabled [ 1.075589] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.075822] serial-tegra 70006200.serial: RX in PIO mode [ 1.075917] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.076809] [drm] Initialized [ 1.080961] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 1.080988] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m [ 1.081361] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 1.081371] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 1.083025] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07 [ 1.083135] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x137fffff] [ 1.083144] pci 0000:00:01.0: BAR 15: assigned [mem 0x20000000-0x207fffff 64bit pref] [ 1.083152] pci 0000:00:02.0: BAR 15: assigned [mem 0x20800000-0x208fffff 64bit pref] [ 1.083157] pci 0000:00:01.0: BAR 13: assigned [io 0x1000-0x4fff] [ 1.083162] pci 0000:00:02.0: BAR 13: assigned [io 0x5000-0x5fff] [ 1.083170] pci 0000:01:00.0: BAR 14: assigned [mem 0x13000000-0x137fffff] [ 1.083177] pci 0000:01:00.0: BAR 15: assigned [mem 0x20000000-0x207fffff 64bit pref] [ 1.083182] pci 0000:01:00.0: BAR 13: assigned [io 0x1000-0x4fff] [ 1.083193] pci 0000:02:01.0: BAR 14: assigned [mem 0x13000000-0x131fffff] [ 1.083199] pci 0000:02:01.0: BAR 15: assigned [mem 0x20000000-0x201fffff 64bit pref] [ 1.083204] pci 0000:02:02.0: BAR 14: assigned [mem 0x13200000-0x133fffff] [ 1.083210] pci 0000:02:02.0: BAR 15: assigned [mem 0x20200000-0x203fffff 64bit pref] [ 1.083215] pci 0000:02:03.0: BAR 14: assigned [mem 0x13400000-0x135fffff] [ 1.083221] pci 0000:02:03.0: BAR 15: assigned [mem 0x20400000-0x205fffff 64bit pref] [ 1.083226] pci 0000:02:04.0: BAR 14: assigned [mem 0x13600000-0x137fffff] [ 1.083232] pci 0000:02:04.0: BAR 15: assigned [mem 0x20600000-0x207fffff 64bit pref] [ 1.083237] pci 0000:02:01.0: BAR 13: assigned [io 0x1000-0x1fff] [ 1.083242] pci 0000:02:02.0: BAR 13: assigned [io 0x2000-0x2fff] [ 1.083246] pci 0000:02:03.0: BAR 13: assigned [io 0x3000-0x3fff] [ 1.083251] pci 0000:02:04.0: BAR 13: assigned [io 0x4000-0x4fff] [ 1.083258] pci 0000:02:01.0: PCI bridge to [bus 03] [ 1.083264] pci 0000:02:01.0: bridge window [io 0x1000-0x1fff] [ 1.083272] pci 0000:02:01.0: bridge window [mem 0x13000000-0x131fffff] [ 1.083279] pci 0000:02:01.0: bridge window [mem 0x20000000-0x201fffff 64bit pref] [ 1.083288] pci 0000:02:02.0: PCI bridge to [bus 04] [ 1.083293] pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] [ 1.083301] pci 0000:02:02.0: bridge window [mem 0x13200000-0x133fffff] [ 1.083307] pci 0000:02:02.0: bridge window [mem 0x20200000-0x203fffff 64bit pref] [ 1.083316] pci 0000:02:03.0: PCI bridge to [bus 05] [ 1.083322] pci 0000:02:03.0: bridge window [io 0x3000-0x3fff] [ 1.083329] pci 0000:02:03.0: bridge window [mem 0x13400000-0x135fffff] [ 1.083336] pci 0000:02:03.0: bridge window [mem 0x20400000-0x205fffff 64bit pref] [ 1.083345] pci 0000:02:04.0: PCI bridge to [bus 06] [ 1.083350] pci 0000:02:04.0: bridge window [io 0x4000-0x4fff] [ 1.083358] pci 0000:02:04.0: bridge window [mem 0x13600000-0x137fffff] [ 1.083364] pci 0000:02:04.0: bridge window [mem 0x20600000-0x207fffff 64bit pref] [ 1.083373] pci 0000:01:00.0: PCI bridge to [bus 02-06] [ 1.083378] pci 0000:01:00.0: bridge window [io 0x1000-0x4fff] [ 1.083386] pci 0000:01:00.0: bridge window [mem 0x13000000-0x137fffff] [ 1.083393] pci 0000:01:00.0: bridge window [mem 0x20000000-0x207fffff 64bit pref] [ 1.083402] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 1.083407] pci 0000:00:01.0: bridge window [io 0x1000-0x4fff] [ 1.083412] pci 0000:00:01.0: bridge window [mem 0x13000000-0x137fffff] [ 1.083418] pci 0000:00:01.0: bridge window [mem 0x20000000-0x207fffff 64bit pref] [ 1.083428] pci 0000:07:00.0: BAR 4: assigned [mem 0x20800000-0x20803fff 64bit pref] [ 1.083445] pci 0000:07:00.0: BAR 2: assigned [mem 0x20804000-0x20804fff 64bit pref] [ 1.083461] pci 0000:07:00.0: BAR 0: assigned [io 0x5000-0x50ff] [ 1.083469] pci 0000:00:02.0: PCI bridge to [bus 07] [ 1.083473] pci 0000:00:02.0: bridge window [io 0x5000-0x5fff] [ 1.083481] pci 0000:00:02.0: bridge window [mem 0x20800000-0x208fffff 64bit pref] [ 1.083794] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.083799] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.083803] pci 0000:02:01.0: Signaling PME through PCIe PME interrupt [ 1.083807] pci 0000:02:02.0: Signaling PME through PCIe PME interrupt [ 1.083811] pci 0000:02:03.0: Signaling PME through PCIe PME interrupt [ 1.083814] pci 0000:02:04.0: Signaling PME through PCIe PME interrupt [ 1.083820] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 1.083955] aer 0000:00:01.0:pcie002: service driver aer loaded [ 1.084166] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.084171] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt [ 1.084177] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 1.084289] aer 0000:00:02.0:pcie002: service driver aer loaded [ 1.084904] brd: module loaded [ 1.089040] loop: module loaded [ 1.089110] tegra_profiler: version: 1.139, samples/io: 47/27 [ 1.089202] tegra_profiler: auth: init [ 1.089772] THERMAL EST: found 2 subdevs [ 1.089778] THERMAL EST num_resources: 0 [ 1.089782] [THERMAL EST subdev 0] [ 1.089788] [THERMAL EST subdev 1] [ 1.090111] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.090114] THERMAL EST: thz register success. [ 1.090204] THERMAL EST: end of probe, return err: 0 [ 1.090947] hisi_sas: driver version v1.6 [ 1.095248] libphy: Fixed MDIO Bus: probed [ 1.095953] tun: Universal TUN/TAP device driver, 1.6 [ 1.095957] tun: (C) 1999-2004 Max Krasnyansky [ 1.096600] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.096603] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.096650] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.096654] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.096701] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.096704] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.096748] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.096751] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.097308] r8168 0000:07:00.0: enabling device (0000 -> 0003) [ 1.097326] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 1.107233] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.107236] Extcon AUX1(HDMI) enable [ 1.107830] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.107886] tegradc tegradc.1: No lt-data, using default setting [ 1.107904] tegradc tegradc.1: No hpd-gpio in DT [ 1.107929] tegradc tegradc.1: DT parsed successfully [ 1.107959] tegradc tegradc.1: Display dc.ffffff800d500000 registered with id=1 [ 1.108827] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.120945] r8168 0000:07:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 1.121023] r8168 0000:07:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e9:f2:50 from device tree [ 1.121413] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 1.121449] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 1.121883] tegradc tegradc.1: probed [ 1.121920] PPP generic driver version 2.4.2 [ 1.122098] PPP BSD Compression module registered [ 1.122101] PPP Deflate Compression module registered [ 1.122117] PPP MPPE Compression module registered [ 1.122122] NET: Registered protocol family 24 [ 1.122143] tegradc tegradc.1: fb registered [ 1.122179] usbcore: registered new interface driver r8152 [ 1.122222] usbcore: registered new interface driver asix [ 1.122265] usbcore: registered new interface driver ax88179_178a [ 1.122295] usbcore: registered new interface driver cdc_ether [ 1.122323] usbcore: registered new interface driver net1080 [ 1.122353] usbcore: registered new interface driver cdc_subset [ 1.122380] usbcore: registered new interface driver zaurus [ 1.122420] usbcore: registered new interface driver cdc_ncm [ 1.122551] VFIO - User Level meta-driver version: 0.3 [ 1.123800] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.123811] ehci-pci: EHCI PCI platform driver [ 1.123848] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.123855] ohci-pci: OHCI PCI platform driver [ 1.123890] ohci-platform: OHCI generic platform driver [ 1.125308] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.125313] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.125321] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.125330] tegradc tegradc.1: blank - powerdown [ 1.125341] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.125345] Extcon DP: HPD disabled [ 1.125348] hpd: hpd_switch 0 [ 1.125352] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.125360] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.125366] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.125780] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.126401] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.127469] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f90e8400 id [ 1.128468] usbcore: registered new interface driver uas [ 1.128516] usbcore: registered new interface driver usb-storage [ 1.128594] usbcore: registered new interface driver usbserial [ 1.131446] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.132386] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.132395] tegra-xudc-new 700d0000.xudc: vbus state: 1 [ 1.132406] tegra-xudc-new 700d0000.xudc: device mode on: 0 [ 1.132425] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0 [ 1.132442] tegra-xudc-new 700d0000.xudc: active: 0 => 1 [ 1.132900] mousedev: PS/2 mouse device common for all mice [ 1.132956] usbcore: registered new interface driver xpad [ 1.133193] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 1.133221] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.133238] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.133954] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.133990] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.134139] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.134145] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.134150] usb usb1: Product: xHCI Host Controller [ 1.134154] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.134159] usb usb1: SerialNumber: 70090000.xusb [ 1.134555] hub 1-0:1.0: USB hub found [ 1.134588] hub 1-0:1.0: 5 ports detected [ 1.135086] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.135099] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.135171] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.135267] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.135272] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.135277] usb usb2: Product: xHCI Host Controller [ 1.135281] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.135285] usb usb2: SerialNumber: 70090000.xusb [ 1.135693] hub 2-0:1.0: USB hub found [ 1.135724] hub 2-0:1.0: 4 ports detected [ 1.142001] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244 [ 1.235030] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.235078] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 1.242424] tegradc tegradc.0: blank - powerdown [ 1.272199] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.275005] rtc rtc1: alarm rtc device [ 1.275018] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.275035] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.275417] i2c /dev entries driver [ 1.276726] pca954x 6-0070: pca954x_probe: forcing device bus number, start 30. [ 1.277721] i2c i2c-6: Added multiplexed i2c bus 30 [ 1.278117] i2c i2c-6: Added multiplexed i2c bus 31 [ 1.278434] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 1.278437] Extcon AUX1(HDMI) disable [ 1.278797] i2c i2c-6: Added multiplexed i2c bus 32 [ 1.279018] i2c i2c-6: Added multiplexed i2c bus 33 [ 1.279246] i2c i2c-6: Added multiplexed i2c bus 34 [ 1.279453] i2c i2c-6: Added multiplexed i2c bus 35 [ 1.279652] i2c i2c-6: Added multiplexed i2c bus 36 [ 1.279917] i2c i2c-6: Added multiplexed i2c bus 37 [ 1.279922] pca954x 6-0070: registered 8 multiplexed busses for I2C switch pca9548 [ 1.280093] imx334 30-0037: probing v4l2 sensor [ 1.280566] imx334 30-0037: tegracam sensor driver:imx334_v2.0.6 [ 1.280571] imx334 30-0037: imx334_board_setup++ [ 1.280597] imx334 30-0037: imx334_power_on: power on [ 1.321666] imx334 30-0037: imx334_calculate_line_time:++ [ 1.322747] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x37 [ 1.323505] imx334 30-0037: imx334_write_reg: i2c write failed, 0x3001 = 1 [ 1.323509] imx334 30-0037: imx334_read_buffered_reg: error setting register hold [ 1.323512] imx334 30-0037: imx334_calculate_line_time: unable to read hmax [ 1.323516] imx334 30-0037: imx334_power_off: power off [ 1.324569] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x37 [ 1.325321] imx334 30-0037: imx334_write_reg: i2c write failed, 0x31a1 = f [ 1.325324] imx334 30-0037: imx334_power_off: error setting XVS XHS to Hi-Z [ 1.325355] imx334 30-0037: imx334_power_on: power on [ 1.367488] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x37 [ 1.368242] imx334 30-0037: imx334_write_reg: i2c write failed, 0x3001 = 1 [ 1.368245] imx334 30-0037: imx334_read_buffered_reg: error setting register hold [ 1.368249] imx334 30-0037: imx334_communication_verify: failed to read VMAX [ 1.368252] imx334 30-0037: imx334_probe: unable to communicate with sensor [ 1.368359] imx334: probe of 30-0037 failed with error -121 [ 1.368410] imx334 31-0037: probing v4l2 sensor [ 1.368861] imx334 31-0037: tegracam sensor driver:imx334_v2.0.6 [ 1.368865] imx334 31-0037: imx334_board_setup++ [ 1.368869] imx334 31-0037: imx334_power_on: power on [ 1.386970] tegradc tegradc.0: unblank [ 1.409928] imx334 31-0037: imx334_calculate_line_time:++ [ 1.410990] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x37 [ 1.411744] imx334 31-0037: imx334_write_reg: i2c write failed, 0x3001 = 1 [ 1.411748] imx334 31-0037: imx334_read_buffered_reg: error setting register hold [ 1.411751] imx334 31-0037: imx334_calculate_line_time: unable to read hmax [ 1.411754] imx334 31-0037: imx334_power_off: power off [ 1.412804] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x37 [ 1.413556] imx334 31-0037: imx334_write_reg: i2c write failed, 0x31a1 = f [ 1.413559] imx334 31-0037: imx334_power_off: error setting XVS XHS to Hi-Z [ 1.413573] imx334 31-0037: imx334_power_on: power on [ 1.429767] tegradc tegradc.0: nominal-pclk:533250000 parent:533250000 div:1.0 pclk:533250000 527917500~581242500 [ 1.429828] tegradc tegradc.0: hdmi: tmds rate:533250K prod-setting:prod_c_hdmi_300m_600m [ 1.430884] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 1.430893] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.455671] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x37 [ 1.456423] imx334 31-0037: imx334_write_reg: i2c write failed, 0x3001 = 1 [ 1.456426] imx334 31-0037: imx334_read_buffered_reg: error setting register hold [ 1.456429] imx334 31-0037: imx334_communication_verify: failed to read VMAX [ 1.456433] imx334 31-0037: imx334_probe: unable to communicate with sensor [ 1.456524] imx334: probe of 31-0037 failed with error -121 [ 1.456573] imx334 32-0037: probing v4l2 sensor [ 1.456977] imx334 32-0037: tegracam sensor driver:imx334_v2.0.6 [ 1.456981] imx334 32-0037: imx334_board_setup++ [ 1.456985] imx334 32-0037: imx334_power_on: power on [ 1.458980] usb 1-2: new low-speed USB device number 2 using tegra-xusb [ 1.483906] usb 1-2: New USB device found, idVendor=045e, idProduct=00cb [ 1.483911] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.483915] usb 1-2: Product: Microsoft USB Optical Mouse [ 1.483918] usb 1-2: Manufacturer: PixArt [ 1.498037] imx334 32-0037: imx334_calculate_line_time:++ [ 1.499075] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.499077] Extcon AUX1(HDMI) enable [ 1.499099] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x37 [ 1.499460] tegradc tegradc.0: sync windows ret = 250 [ 1.499860] imx334 32-0037: imx334_write_reg: i2c write failed, 0x3001 = 1 [ 1.499863] imx334 32-0037: imx334_read_buffered_reg: error setting register hold [ 1.499867] imx334 32-0037: imx334_calculate_line_time: unable to read hmax [ 1.499870] imx334 32-0037: imx334_power_off: power off [ 1.500917] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x37 [ 1.501666] imx334 32-0037: imx334_write_reg: i2c write failed, 0x31a1 = f [ 1.501670] imx334 32-0037: imx334_power_off: error setting XVS XHS to Hi-Z [ 1.501686] imx334 32-0037: imx334_power_on: power on [ 1.543791] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x37 [ 1.544544] imx334 32-0037: imx334_write_reg: i2c write failed, 0x3001 = 1 [ 1.544548] imx334 32-0037: imx334_read_buffered_reg: error setting register hold [ 1.544551] imx334 32-0037: imx334_communication_verify: failed to read VMAX [ 1.544554] imx334 32-0037: imx334_probe: unable to communicate with sensor [ 1.544649] imx334: probe of 32-0037 failed with error -121 [ 1.545868] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.550379] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.550384] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.550696] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.550707] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.550714] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.550846] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.550854] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.550860] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.551029] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.551036] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.551040] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.551222] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.551829] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.551875] tegra_aotag tegra-aotag: Invalid temp readout [ 1.551894] tegra_aotag tegra-aotag: Invalid temp readout [ 1.551910] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.551918] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.552662] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.552676] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.552817] tegra_aotag tegra-aotag: Invalid temp readout [ 1.552840] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.553172] parse_throttle_dt_data: Num cap clks = 6 [ 1.553175] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.553182] parse_throttle_dt_data: clk=gpu type=4 [ 1.553200] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.553220] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.553240] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.553243] parse_throttle_dt_data: clk=emc type=3 [ 1.553913] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.553998] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.554096] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.554674] FAN dev name: pwm-fan [ 1.554717] FAN:gpio request success. [ 1.554766] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.555013] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.555217] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.555225] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.555304] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.555308] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.555313] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.555317] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.555320] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.555324] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.555328] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.555331] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.555335] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.555339] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.556328] device-mapper: uevent: version 1.0.3 [ 1.556847] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.559521] tegra210-cpufreq cpufreq: probe()...completed [ 1.560219] sdhci: Secure Digital Host Controller Interface driver [ 1.560220] sdhci: Copyright(c) Pierre Ossman [ 1.560221] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.560591] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 1.566216] tegra-se 70012000.se: tegra_se_probe: complete [ 1.566848] hidraw: raw HID events driver (C) Jiri Kosina [ 1.570252] input: PixArt Microsoft USB Optical Mouse as /devices/70090000.xusb/usb1/1-2/1-2:1.0/0003:045E:00CB.0001/input/input0 [ 1.570590] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-70090000.xusb-2/input0 [ 1.570636] usbcore: registered new interface driver usbhid [ 1.570637] usbhid: USB HID core driver [ 1.576451] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.576618] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.578372] nvpmodel: initialized successfully [ 1.579472] usbcore: registered new interface driver snd-usb-audio [ 1.579531] No Device Node present for smmu client: snd-soc-dummy !! [ 1.579536] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.579557] iommu: Adding device snd-soc-dummy to group 35 [ 1.593434] OPE platform probe [ 1.593517] OPE platform probe successful [ 1.593541] OPE platform probe [ 1.593623] OPE platform probe successful [ 1.601024] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input1 [ 1.602989] usb 1-3: new low-speed USB device number 3 using tegra-xusb [ 1.603003] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 1.621312] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.621433] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.621547] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.621663] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.621777] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.621892] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.622012] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.622126] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.622242] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.622352] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.630513] usb 1-3: New USB device found, idVendor=045e, idProduct=07f8 [ 1.630517] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.630520] usb 1-3: Product: Wired Keyboard 600 [ 1.630523] usb 1-3: Manufacturer: Microsoft [ 1.635095] input: Microsoft Wired Keyboard 600 as /devices/70090000.xusb/usb1/1-3/1-3:1.0/0003:045E:07F8.0002/input/input2 [ 1.645433] u32 classifier [ 1.645435] Actions configured [ 1.645503] Initializing XFRM netlink socket [ 1.646221] NET: Registered protocol family 10 [ 1.646923] NET: Registered protocol family 17 [ 1.646933] NET: Registered protocol family 15 [ 1.647029] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.647085] Bluetooth: RFCOMM socket layer initialized [ 1.647094] Bluetooth: RFCOMM ver 1.11 [ 1.647098] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.647102] Bluetooth: HIDP socket layer initialized [ 1.647119] 9pnet: Installing 9P2000 support [ 1.647157] Key type dns_resolver registered [ 1.650160] Registered cp15_barrier emulation handler [ 1.657572] Registered setend emulation handler [ 1.658751] registered taskstats version 1 [ 1.659440] Adding domain ve2-pd to PM domain host1x-pd [ 1.659675] Adding domain ve-pd to PM domain host1x-pd [ 1.663784] isp 54600000.isp: initialized [ 1.663889] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.664704] isp 54680000.isp: initialized [ 1.668252] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.672499] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 1.674996] last reset is due to software reset [ 1.674999] KERNEL: PMC reset status reg: 0x3 [ 1.675077] BL: PMC reset status reg: 0x3 [ 1.675079] BL: PMIC poweroff Event Recorder: 0x0 [ 1.676581] clk_cbus_recalc_rate: no gbus parent [ 1.676585] clk_cbus_round_rate: no gbus parent [ 1.676587] clk_cbus_round_rate: no gbus parent [ 1.676592] clk_cbus_recalc_rate: no gbus parent [ 1.676694] clk_cbus_recalc_rate: no gbus parent [ 1.676697] clk_cbus_round_rate: no gbus parent [ 1.676698] clk_cbus_round_rate: no gbus parent [ 1.676701] clk_cbus_recalc_rate: no gbus parent [ 1.676783] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 1.677394] tegra_dvfs: GPU-cap: registered [ 1.677449] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.677451] tegra dvfs: vdd-core: nominal 1075mV, offset 1000000uV, step 12500uV, scaling enabled [ 1.677453] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled [ 1.677707] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.678497] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 1.680859] tegra_dvfs: vdd-gpu-vts: registered [ 1.681245] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.681837] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.682352] input: gpio-keys as /devices/gpio-keys/input/input3 [ 1.695566] hid-generic 0003:045E:07F8.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-70090000.xusb-3/input0 [ 1.699126] input: Microsoft Wired Keyboard 600 as /devices/70090000.xusb/usb1/1-3/1-3:1.1/0003:045E:07F8.0003/input/input4 [ 1.728594] tegra_rtc 7000e000.rtc: setting system clock to 2020-05-28 13:27:42 UTC (1590672462) [ 1.729555] vi 54080000.vi: vi_probe: ++ [ 1.735586] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.735589] Extcon HDMI: HPD enabled [ 1.735645] tegradc tegradc.0: hdmi: plugged [ 1.735692] vi 54080000.vi: initialized [ 1.739626] vi 54080000.vi: subdev nvcsi--3 bound [ 1.739718] vi 54080000.vi: subdev nvcsi--2 bound [ 1.739799] vi 54080000.vi: subdev nvcsi--1 bound [ 1.740013] mmcblk mmc0:0001: Card claimed for testing. [ 1.741242] Disable partitions left on by BL [ 1.741245] disb [ 1.741289] bwmgr: missing cdev-type property [ 1.741389] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.741395] DRAM derating cdev registered. [ 1.742430] vdd-fan: disabling [ 1.742434] vdd-usb-vbus: disabling [ 1.742436] vdd-usb-vbus2: disabling [ 1.742445] vddio-sdmmc-ap: disabling [ 1.742816] vddio-sdmmc3-ap: disabling [ 1.743173] vdd-3v3-sd: disabling [ 1.743178] avdd-io-edp-1v05: disabling [ 1.743181] vdd-usb-hub-en: disabling [ 1.743650] ALSA device list: [ 1.743654] #0: tegra-hda at 0x70038000 irq 82 [ 1.743657] #1: tegra-snd-t210ref-mobile-rt565x [ 1.746738] Freeing unused kernel memory: 8576K [ 1.759449] hid-generic 0003:045E:07F8.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-70090000.xusb-3/input1 [ 1.767721] Root device found: mmcblk0p1 [ 1.768742] Found dev node: /dev/mmcblk0p1 [ 1.788462] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.789185] Rootfs mounted over mmcblk0p1 [ 1.803557] Switching from initrd to actual rootfs [ 1.901357] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.912525] cgroup: cgroup2: unknown option "nsdelegate" [ 1.925885] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.926615] systemd[1]: Detected architecture arm64. [ 1.949366] systemd[1]: Set hostname to . [ 2.003048] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 2.003056] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 2.013440] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 2.021951] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 2.031568] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.031577] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.066984] tegra_cec 70015000.tegra_cec: physical address: 10:00. [ 2.125341] random: systemd: uninitialized urandom read (16 bytes read) [ 2.125552] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.125649] random: systemd: uninitialized urandom read (16 bytes read) [ 2.125669] systemd[1]: Reached target Swap. [ 2.125693] random: systemd: uninitialized urandom read (16 bytes read) [ 2.127567] systemd[1]: Created slice User and Session Slice. [ 2.128388] systemd[1]: Created slice System Slice. [ 2.128559] systemd[1]: Listening on udev Kernel Socket. [ 2.131515] tegra_cec 70015000.tegra_cec: Sent res: -113. [ 2.131519] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.176223] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.196509] FAN rising trip_level:1 cur_temp:52500 trip_temps[2]:61000 [ 2.525906] systemd-journald[2050]: Received request to flush runtime journal from PID 1 [ 2.709299] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 2.709309] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 2.720861] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 2.729342] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 2.742850] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 3.313762] using random self ethernet address [ 3.318440] using random host ethernet address [ 3.630530] random: crng init done [ 3.633965] random: 7 urandom warning(s) missed due to ratelimiting [ 3.912854] Mass Storage Function, version: 2009/09/11 [ 3.912862] LUN: removable file: (no medium) [ 3.920577] using random self ethernet address [ 3.925263] using random host ethernet address [ 4.016639] rndis0: HOST MAC 3a:5a:71:6d:8c:20 [ 4.017216] rndis0: MAC 3a:5a:71:6d:8c:21 [ 4.020439] usb0: HOST MAC 3a:5a:71:6d:8c:22 [ 4.020645] usb0: MAC 3a:5a:71:6d:8c:23 [ 4.020680] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 4.025680] l4tbr0: port 1(rndis0) entered blocking state [ 4.025685] l4tbr0: port 1(rndis0) entered disabled state [ 4.026282] device rndis0 entered promiscuous mode [ 4.034138] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 4.047218] l4tbr0: port 2(usb0) entered blocking state [ 4.047222] l4tbr0: port 2(usb0) entered disabled state [ 4.048123] device usb0 entered promiscuous mode [ 4.074198] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 4.222807] zram: Added device: zram0 [ 4.231224] zram: Added device: zram1 [ 4.235595] zram: Added device: zram2 [ 4.239547] zram: Added device: zram3 [ 4.266417] zram0: detected capacity change from 0 to 518557696 [ 4.308511] Adding 506400k swap on /dev/zram0. Priority:5 extents:1 across:506400k SS [ 4.315697] zram1: detected capacity change from 0 to 518557696 [ 4.342603] Adding 506400k swap on /dev/zram1. Priority:5 extents:1 across:506400k SS [ 4.346893] zram2: detected capacity change from 0 to 518557696 [ 4.366232] Adding 506400k swap on /dev/zram2. Priority:5 extents:1 across:506400k SS [ 4.370592] zram3: detected capacity change from 0 to 518557696 [ 4.383448] Adding 506400k swap on /dev/zram3. Priority:5 extents:1 across:506400k SS [ 4.402113] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.405161] eth0: 0xffffff800a3fc000, 00:04:4b:e9:f2:50, IRQ 409 [ 4.486759] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.078676] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 5.078694] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 5.091102] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 5.099520] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 5.263793] tegradc tegradc.0: blank - powerdown [ 5.298043] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 5.298046] Extcon AUX1(HDMI) disable [ 5.309891] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 5.309896] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 5.322653] tegradc tegradc.0: unblank [ 5.366851] tegradc tegradc.0: nominal-pclk:533250000 parent:533250000 div:1.0 pclk:533250000 527917500~581242500 [ 5.366928] tegradc tegradc.0: hdmi: tmds rate:533250K prod-setting:prod_c_hdmi_300m_600m [ 5.368905] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 5.368913] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 5.411405] usb usb2: usb_suspend_both: status 0 [ 5.439150] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 5.439152] Extcon AUX1(HDMI) enable [ 5.439424] tegradc tegradc.0: sync windows ret = 250 [ 6.134389] tegradc tegradc.0: blank - powerdown [ 6.186020] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 6.186021] Extcon AUX1(HDMI) disable [ 6.210361] tegradc tegradc.0: unblank [ 6.227165] tegradc tegradc.0: nominal-pclk:533250000 parent:533250000 div:1.0 pclk:533250000 527917500~581242500 [ 6.227230] tegradc tegradc.0: hdmi: tmds rate:533250K prod-setting:prod_c_hdmi_300m_600m [ 6.229286] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 6.229294] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 6.298625] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 6.298628] Extcon AUX1(HDMI) enable [ 6.316055] tegradc tegradc.0: unblank [ 6.316279] tegradc tegradc.1: blank - powerdown [ 6.907079] fuse init (API version 7.26) [ 7.539529] r8168: eth0: link up [ 7.539582] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.046608] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 11.046652] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 11.057515] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 11.066199] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 14.453403] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 14.453414] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 14.463945] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 14.472881] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 16.942517] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 16.942539] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 16.955931] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 16.965038] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 18.012413] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 18.012431] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 18.023351] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 18.031865] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 18.763638] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 18.763704] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 18.787150] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 18.795672] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 21.076464] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 21.076474] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 21.086793] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 21.095264] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 21.437923] tegradc tegradc.0: blank - powerdown [ 21.498157] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 21.498169] Extcon AUX1(HDMI) disable [ 21.521501] tegradc tegradc.1: blank - powerdown [ 21.535558] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 21.535568] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 21.547144] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 21.555532] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 21.684914] tegradc tegradc.0: blank - powerdown [ 21.684935] tegradc tegradc.0: unblank [ 21.695648] tegradc tegradc.0: nominal-pclk:533250000 parent:533250000 div:1.0 pclk:533250000 527917500~581242500 [ 21.695727] tegradc tegradc.0: hdmi: tmds rate:533250K prod-setting:prod_c_hdmi_300m_600m [ 21.697666] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 21.697673] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 21.769015] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 21.769018] Extcon AUX1(HDMI) enable [ 21.788656] tegradc tegradc.0: unblank [ 21.788669] tegradc tegradc.1: blank - powerdown [ 22.114537] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 22.114547] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 22.124811] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 22.133242] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 22.770062] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 22.770072] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 22.780764] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 22.789207] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 24.961267] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.961280] Bluetooth: BNEP socket layer initialized [ 25.433652] tegradc tegradc.0: unblank [ 25.433801] tegradc tegradc.1: blank - powerdown [ 26.413557] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 26.413569] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 26.427281] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 26.437044] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 26.664793] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 26.664804] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 26.675072] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 26.683510] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 33.561698] FAN rising trip_level:2 cur_temp:62000 trip_temps[3]:71000 [ 36.380614] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 36.380624] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 36.391508] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 36.400318] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 37.351210] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 37.351219] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 37.361625] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 37.370081] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 39.130652] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 39.130661] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 39.143015] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 39.151713] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 39.191944] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 39.191955] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 39.203957] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 39.212986] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 45.985793] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 45.985818] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 45.996303] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 46.004961] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 47.220124] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 47.220224] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 47.235282] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 47.244273] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 49.969509] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 49.969587] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 49.980435] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 49.988968] pcieport 0000:00:01.0: [ 0] Receiver Error (First)