[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5434-d8000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Sat Feb 19 08:59:22 PST 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 gpt earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 nv-auto-config quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 nv-auto-config [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29836(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3568476K/4159488K available (15358K kernel code, 2956K rwdata, 6696K rodata, 8640K init, 612K bss, 115876K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001697] Console: colour dummy device 80x25 [ 0.001706] console [tty0] enabled [ 0.001713] bootconsole [uart8250] disabled [ 0.001732] kmemleak: Kernel memory leak detector disabled [ 0.001751] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001764] pid_max: default: 32768 minimum: 301 [ 0.002210] Security Framework initialized [ 0.002431] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002440] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003541] ftrace: allocating 47098 entries in 184 pages [ 0.171292] sched-energy: CPU device node has no sched-energy-costs [ 0.171325] ASID allocator initialised with 65536 entries [ 0.207876] tegra-id: chipid=22117. [ 0.207889] tegra-id: opt_subrevision=0. [ 0.207906] Tegra Speedo/IDDQ fuse revision 4 [ 0.207911] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.207915] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.207921] Tegra: CPU Speedo Value 2067, SoC Speedo Value 1961, GPU Speedo Value 2065 [ 0.207925] Tegra: CPU IDDQ Value 1960, SoC IDDQ Value 2128, GPU IDDQ Value 2615 [ 0.207945] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.207962] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts [ 0.207969] DTB Build time: Feb 19 2022 09:01:46 [ 0.257091] CPU1: Booted secondary processor [411fd071] [ 0.289004] CPU2: Booted secondary processor [411fd071] [ 0.320971] CPU3: Booted secondary processor [411fd071] [ 0.321057] Brought up 4 CPUs [ 0.321064] SMP: Total of 4 processors activated. [ 0.321072] CPU features: detected feature: 32-bit EL0 Support [ 0.321327] CPU: All CPU(s) started at EL2 [ 0.321344] alternatives: patching kernel code [ 0.329410] devtmpfs: initialized [ 0.367148] Initilizing CustomIPI irq domain [ 0.367464] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.367482] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.378058] pinctrl core: initialized pinctrl subsystem [ 0.378639] OS set in device tree is not L4T. [ 0.379057] regulator-dummy: no parameters [ 0.379327] Initializing plugin-manager [ 0.379480] Plugin module not found [ 0.379673] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [ 0.380181] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [ 0.381222] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.381440] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.382080] node /plugin-manager/fragement@13 match with board >=3448-0000-300 [ 0.385591] NET: Registered protocol family 16 [ 0.387966] pstore: using zlib compression [ 0.388005] console [pstore-1] enabled [ 0.388009] pstore: Registered ramoops as persistent store backend [ 0.388014] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.397112] cpuidle: using governor menu [ 0.401215] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.402868] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.402889] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.405550] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.407885] Serial: AMBA PL011 UART driver [ 0.408399] tegra_powergate_init: DONE [ 0.408415] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts [ 0.408421] DTB Build time: Feb 19 2022 09:01:46 [ 0.410344] Tegra reboot handler registered. [ 0.414858] iommu: Adding device tegra-carveouts to group 0 [ 0.414984] platform tegra-carveouts: domain=ffffffc0f9435498 allocates as[0]=ffffffc0f94240a8 [ 0.415334] iommu: Adding device smmu_test to group 1 [ 0.415378] platform smmu_test: domain=ffffffc0f94356d8 allocates as[0]=ffffffc0f9424110 [ 0.416175] mc: mapped MMIO address: 0xffffff8008041000 -> 0x70019000 [ 0.416237] mc: mapped MMIO address: 0xffffff8008067000 -> 0x7001c000 [ 0.416287] mc: mapped MMIO address: 0xffffff800807b000 -> 0x7001d000 [ 0.416297] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.416323] mc-err: mcerr ops are set to t21x [ 0.426893] iommu: Adding device 70090000.xusb to group 2 [ 0.427175] iommu: Adding device 70006000.serial to group 3 [ 0.427233] platform 70006000.serial: domain=ffffffc0f943fd98 allocates as[0]=ffffffc0f9424178 [ 0.427667] iommu: Adding device 70006040.serial to group 4 [ 0.427929] iommu: Adding device 70006200.serial to group 5 [ 0.428116] iommu: Adding device sound to group 6 [ 0.428160] platform sound: domain=ffffffc0f94c6318 allocates as[0]=ffffffc0f94241e0 [ 0.428719] iommu: Adding device 7000d400.spi to group 7 [ 0.429018] iommu: Adding device 7000d600.spi to group 8 [ 0.429333] iommu: Adding device 70410000.spi to group 9 [ 0.429639] iommu: Adding device 50000000.host1x to group 10 [ 0.429911] iommu: Adding device 54080000.vi to group 11 [ 0.430313] iommu: Adding device 54600000.isp to group 12 [ 0.430595] iommu: Adding device 54680000.isp to group 13 [ 0.430873] iommu: Adding device tegradc.0 to group 14 [ 0.430921] platform tegradc.0: domain=ffffffc0f9518258 allocates as[0]=ffffffc0f9424248 [ 0.431438] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.431746] iommu: Adding device tegradc.1 to group 15 [ 0.431812] platform tegradc.1: domain=ffffffc0f9518498 allocates as[0]=ffffffc0f94242b0 [ 0.432320] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.432555] iommu: Adding device 54340000.vic to group 16 [ 0.432767] iommu: Adding device 544c0000.nvenc to group 17 [ 0.432968] iommu: Adding device 54500000.tsec to group 18 [ 0.433196] iommu: Adding device 54100000.tsecb to group 19 [ 0.433402] iommu: Adding device 54480000.nvdec to group 20 [ 0.433593] iommu: Adding device 54380000.nvjpg to group 21 [ 0.434658] iommu: Adding device 546c0000.i2c to group 22 [ 0.434985] iommu: Adding device 57000000.gpu to group 23 [ 0.435063] platform 57000000.gpu: domain=ffffffc0f952e498 allocates as[0]=ffffffc0f9424318 [ 0.435101] platform 57000000.gpu: domain=ffffffc0f952e498 allocates as[1]=ffffffc0f9424380 [ 0.435139] platform 57000000.gpu: domain=ffffffc0f952e498 allocates as[2]=ffffffc0f94243e8 [ 0.435171] platform 57000000.gpu: domain=ffffffc0f952e498 allocates as[3]=ffffffc0f9424450 [ 0.436008] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.436019] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.436030] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.436035] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.436039] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.489293] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.489303] tegra-pmc: Clear bootloader IO dpd settings [ 0.489325] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.489390] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.489683] iommu: Adding device 70012000.se to group 24 [ 0.490260] iommu: Adding device 1003000.pcie to group 25 [ 0.490314] platform 1003000.pcie: domain=ffffffc0f952ec18 allocates as[0]=ffffffc0f94244b8 [ 0.490832] iommu: Adding device 7000c000.i2c to group 26 [ 0.491153] iommu: Adding device 7000c400.i2c to group 27 [ 0.491462] iommu: Adding device 7000c500.i2c to group 28 [ 0.491765] iommu: Adding device 7000c700.i2c to group 29 [ 0.492116] iommu: Adding device 7000d000.i2c to group 30 [ 0.492436] iommu: Adding device 7000d100.i2c to group 31 [ 0.492751] iommu: Adding device sdhci-tegra.0 to group 32 [ 0.492805] platform sdhci-tegra.0: domain=ffffffc0f953d798 allocates as[0]=ffffffc0f9424520 [ 0.493893] iommu: Adding device 700d0000.xudc to group 33 [ 0.498029] vdd-ac-bat: 5000 mV [ 0.498486] vdd-5v0-sys: 5000 mV [ 0.499433] vdd-5v0-hdmi: 5000 mV [ 0.499923] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.500250] vdd-1v8-sys: 1800 mV [ 0.500715] vdd-fan: 5000 mV [ 0.500974] vdd-fan: supplied by vdd-5v0-sys [ 0.501259] vdd-usb-vbus: 5000 mV [ 0.501560] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.501996] vdd-usb-vbus2: 5000 mV [ 0.538005] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.540134] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.541308] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.541335] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.541355] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.541670] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.549843] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.550191] SCSI subsystem initialized [ 0.550387] libata version 3.00 loaded. [ 0.550731] usbcore: registered new interface driver usbfs [ 0.550781] usbcore: registered new interface driver hub [ 0.550831] usbcore: registered new device driver usb [ 0.555035] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.561091] vdd-core: 600 <--> 1162 mV at 1075 mV [ 0.562026] random: fast init done [ 0.562033] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.564996] vdd-ddr-1v1: 1150 mV [ 0.569042] vdd-pre-reg-1v35: 1350 mV [ 0.572985] vdd-1v8: 1800 mV [ 0.576241] avdd-sys-1v2: 1200 mV [ 0.580237] vdd-pex-1v0: 1050 mV [ 0.580912] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.581467] max77620-ldo3: at 3100 mV [ 0.584245] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.584776] max77620-ldo5: at 3100 mV [ 0.588239] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.592237] avdd-1v05-pll: 1050 mV [ 0.596238] avdd-io-hdmi-dp: 1050 mV [ 0.598713] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.599020] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.599317] max77620 4-003c: max77620 probe successful [ 0.602047] media: Linux media interface: v0.10 [ 0.602102] Linux video capture interface: v2.00 [ 0.603016] pps_core: LinuxPPS API ver. 1 registered [ 0.603022] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.603057] PTP clock support registered [ 0.606307] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.607203] Advanced Linux Sound Architecture Driver Initialized. [ 0.607832] Bluetooth: Core ver 2.22 [ 0.607887] NET: Registered protocol family 31 [ 0.607891] Bluetooth: HCI device and connection manager initialized [ 0.607905] Bluetooth: HCI socket layer initialized [ 0.607914] Bluetooth: L2CAP socket layer initialized [ 0.607937] Bluetooth: SCO socket layer initialized [ 0.609674] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.609690] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.609735] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.609750] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.613137] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.614408] vdd-3v3-sys: 3300 mV [ 0.614808] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.614856] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.616316] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.616731] vdd-3v3-sd: 3300 mV [ 0.617104] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.617690] avdd-io-edp-1v05: 1050 mV [ 0.618048] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.618178] vdd-usb-hub-en: 5000 mV [ 0.618515] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.619566] camchar: rtcpu character device driver loaded [ 0.620331] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.621663] clocksource: Switched to clocksource arch_sys_counter [ 0.661865] VFS: Disk quotas dquot_6.6.0 [ 0.662003] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.662481] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.662925] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.662945] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.663140] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.663145] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.663156] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.663182] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.663188] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.663202] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.663209] nvmap_page_pool_init: Total RAM pages: 1010903 [ 0.663214] nvmap_page_pool_init: nvmap page pool size: 126362 pages (493 MB) [ 0.663297] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.663778] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.664686] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.673027] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.673481] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.673887] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.674183] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.674356] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.674634] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.674638] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.675070] NET: Registered protocol family 2 [ 0.675201] IP idents hash table entries: 65536 (order: 7, 524288 bytes) [ 0.677446] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.677741] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.678249] TCP: Hash tables configured (established 32768 bind 32768) [ 0.678400] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.678480] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.678908] NET: Registered protocol family 1 [ 0.679544] RPC: Registered named UNIX socket transport module. [ 0.679548] RPC: Registered udp transport module. [ 0.679552] RPC: Registered tcp transport module. [ 0.679556] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.679569] PCI: CLS 0 bytes, default 64 [ 0.679798] Trying to unpack rootfs image as initramfs... [ 0.977360] Freeing initrd memory: 6988K [ 0.987172] host1x 50000000.host1x: initialized [ 0.989050] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.992316] audit: initializing netlink subsys (disabled) [ 0.992382] audit: type=2000 audit(0.843:1): initialized [ 0.993108] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.003128] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.004553] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.005333] 9p: Installing v9fs 9p2000 file system support [ 1.008609] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.008726] io scheduler noop registered [ 1.009019] io scheduler cfq registered (default) [ 1.011811] gic 702f9000.agic: GIC IRQ controller registered [ 1.014815] iommu: Adding device 702ef000.adsp to group 34 [ 1.023597] iommu: Adding device aconnect@702c0000:adsp_audio to group 35 [ 1.023744] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.024328] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x71a840d [ 1.024336] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.026273] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.026383] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.026485] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.026675] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.026763] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.026856] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.026943] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.027034] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.027149] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.027241] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.033486] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.035241] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.037128] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.038544] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.038900] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.040131] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.040349] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.040569] Adding domain tsec-pd to PM domain host1x-pd [ 1.042743] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.043749] tsec 54500000.tsec: initialized [ 1.045285] tsec 54100000.tsecb: initialized [ 1.046055] Adding domain nvdec-pd to PM domain host1x-pd [ 1.049490] nvdec 54480000.nvdec: initialized [ 1.050674] Adding domain vic03-pd to PM domain host1x-pd [ 1.050863] Adding domain msenc-pd to PM domain host1x-pd [ 1.051021] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.055249] falcon 54340000.vic: initialized [ 1.056559] falcon 544c0000.nvenc: initialized [ 1.057922] falcon 54380000.nvjpg: initialized [ 1.062472] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 1.062522] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.062554] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.062699] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.062793] display board info: id 0x0, fab 0x0 [ 1.062847] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.062852] tegra_cec 70015000.tegra_cec: probed [ 1.062854] generic_infoframe_type: 0x87 [ 1.062990] tegradc tegradc.0: DT parsed successfully [ 1.063040] tegradc tegradc.0: Display dc.ffffff800abc0000 registered with id=0 [ 1.070777] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.071246] tegradc tegradc.0: probed [ 1.071931] Console: switching to colour frame buffer device 80x30 [ 1.071963] tegradc tegradc.0: fb registered [ 1.073383] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.073459] tegradc tegradc.1: No lt-data, using default setting [ 1.073484] tegradc tegradc.1: No hpd-gpio in DT [ 1.073523] tegradc tegradc.1: DT parsed successfully [ 1.073576] tegradc tegradc.1: Display dc.ffffff800ad40000 registered with id=1 [ 1.075212] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.077105] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.077960] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.077967] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.078313] kfuse 7000fc00.kfuse: initialized [ 1.580905] Host read timeout at address 545c00c4 [ 1.581260] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.582201] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.582434] tegradc tegradc.1: probed [ 1.582808] tegradc tegradc.1: fb registered [ 1.583405] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.583414] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.583801] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.585049] vdd-gpu: applied init 1000000uV constraint [ 1.585055] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.585414] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.586013] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.586022] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.586031] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.586047] tegradc tegradc.1: blank - powerdown [ 1.586066] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.586072] Extcon DP: HPD disabled [ 1.586077] hpd: hpd_switch 0 [ 1.586081] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.586091] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.586097] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.587774] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 1.587784] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.587791] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 1.587797] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 1.587804] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.587843] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400 [ 1.587957] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.588186] iommu: Adding device 0000:00:01.0 to group 36 [ 1.588304] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 1.588386] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.588560] iommu: Adding device 0000:00:02.0 to group 37 [ 1.588655] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.588666] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.588828] pci 0000:01:00.0: [13a8:0358] type 00 class 0x070002 [ 1.588857] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff] [ 1.589035] pci 0000:01:00.0: PME# supported from D0 D3hot [ 1.589213] iommu: Adding device 0000:01:00.0 to group 38 [ 1.591613] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.591704] No Device Node present for smmu client: serial8250 !! [ 1.591712] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.591740] iommu: Adding device serial8250 to group 39 [ 1.594132] console [ttyS0] disabled [ 1.594205] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.599769] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.599967] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 1.599997] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 1.600033] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 1.600055] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 1.600243] pci 0000:02:00.0: supports D1 D2 [ 1.600247] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.600497] iommu: Adding device 0000:02:00.0 to group 40 [ 1.605350] console [ttyS0] enabled [ 1.606480] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.606778] serial-tegra 70006200.serial: RX in PIO mode [ 1.606876] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.607860] [drm] Initialized [ 1.609809] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 1.609892] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 1.609901] pci 0000:00:02.0: BAR 14: assigned [mem 0x13100000-0x131fffff] [ 1.609907] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 1.609917] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13003fff] [ 1.609930] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.609940] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 1.609953] pci 0000:02:00.0: BAR 4: assigned [mem 0x13100000-0x13103fff 64bit] [ 1.609976] pci 0000:02:00.0: BAR 2: assigned [mem 0x13104000-0x13104fff 64bit] [ 1.609997] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 1.610006] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.610011] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 1.610017] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 1.610531] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.610537] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.610546] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 1.610685] aer 0000:00:01.0:pcie002: service driver aer loaded [ 1.610921] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.610928] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.610935] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 1.611050] aer 0000:00:02.0:pcie002: service driver aer loaded [ 1.611202] serial 0000:01:00.0: enabling device (0000 -> 0002) [ 1.611703] 0000:01:00.0: ttyS1 at MMIO 0x13000000 (irq = 84, base_baud = 7812500) is a XR17V35X [ 1.612184] 0000:01:00.0: ttyS2 at MMIO 0x13000400 (irq = 84, base_baud = 7812500) is a XR17V35X [ 1.612588] 0000:01:00.0: ttyS3 at MMIO 0x13000800 (irq = 84, base_baud = 7812500) is a XR17V35X [ 1.612782] serial 0000:01:00.0: Couldn't register serial port 0, irq 84, type 2, error -28 [ 1.619882] brd: module loaded [ 1.625853] loop: module loaded [ 1.625950] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.626073] tegra_profiler: auth: init [ 1.627479] THERMAL EST: found 2 subdevs [ 1.627488] THERMAL EST num_resources: 0 [ 1.627494] [THERMAL EST subdev 0] [ 1.627501] [THERMAL EST subdev 1] [ 1.627942] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.627946] THERMAL EST: thz register success. [ 1.628110] THERMAL EST: end of probe, return err: 0 [ 1.629366] sd: No Scsi addr parsed to reserve index [ 1.629406] hisi_sas: driver version v1.6 [ 1.634336] tegra-qspi 70410000.spi: Prod settings list not found [ 1.635458] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 1.635466] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 1.639184] libphy: Fixed MDIO Bus: probed [ 1.641255] tun: Universal TUN/TAP device driver, 1.6 [ 1.641261] tun: (C) 1999-2004 Max Krasnyansky [ 1.642491] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.642496] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.642596] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.642599] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.642698] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.642702] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.642787] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.642790] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.644025] r8168 0000:02:00.0: enabling device (0000 -> 0003) [ 1.644055] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 1.658995] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 1.659135] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:eb:dd:88 from device tree [ 1.659959] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 1.660008] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 1.660775] PPP generic driver version 2.4.2 [ 1.661064] PPP BSD Compression module registered [ 1.661070] PPP Deflate Compression module registered [ 1.661109] PPP MPPE Compression module registered [ 1.661117] NET: Registered protocol family 24 [ 1.661231] usbcore: registered new interface driver r8152 [ 1.661318] usbcore: registered new interface driver asix [ 1.661428] usbcore: registered new interface driver ax88179_178a [ 1.661514] usbcore: registered new interface driver cdc_ether [ 1.661592] usbcore: registered new interface driver net1080 [ 1.661697] usbcore: registered new interface driver cdc_subset [ 1.661778] usbcore: registered new interface driver zaurus [ 1.661879] usbcore: registered new interface driver cdc_ncm [ 1.662142] VFIO - User Level meta-driver version: 0.3 [ 1.663438] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.663464] ehci-pci: EHCI PCI platform driver [ 1.663521] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.663533] ohci-pci: OHCI PCI platform driver [ 1.663577] ohci-platform: OHCI generic platform driver [ 1.666353] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.666982] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.668169] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f90a1400 id [ 1.670614] usbcore: registered new interface driver uas [ 1.670682] usbcore: registered new interface driver usb-storage [ 1.670800] usbcore: registered new interface driver usbserial [ 1.671060] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release [ 1.671114] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.671140] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.671931] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.671998] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.672200] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.672207] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.672212] usb usb1: Product: xHCI Host Controller [ 1.672218] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.672222] usb usb1: SerialNumber: 70090000.xusb [ 1.672905] hub 1-0:1.0: USB hub found [ 1.672952] hub 1-0:1.0: 5 ports detected [ 1.673785] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.673805] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.673946] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.674061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.674068] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.674072] usb usb2: Product: xHCI Host Controller [ 1.674077] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.674081] usb usb2: SerialNumber: 70090000.xusb [ 1.674623] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.674626] hub 2-0:1.0: USB hub found [ 1.674662] hub 2-0:1.0: 4 ports detected [ 1.675800] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.675809] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.676377] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.676390] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.676424] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.676718] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.677419] mousedev: PS/2 mouse device common for all mice [ 1.677525] usbcore: registered new interface driver xpad [ 1.773760] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.777913] usb usb2: usb_suspend_both: status 0 [ 1.806536] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.809059] rtc rtc1: alarm rtc device [ 1.809081] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.809115] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.809825] i2c /dev entries driver [ 1.812321] i2c i2c-6: Added multiplexed i2c bus 7 [ 1.812818] i2c i2c-6: Added multiplexed i2c bus 8 [ 1.812825] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 1.813813] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.837149] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.837241] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.844880] imx219 7-0010: board setup failed [ 1.849322] imx219: probe of 7-0010 failed with error -121 [ 1.849996] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.873280] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.873368] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.881307] imx219 8-0010: board setup failed [ 1.885763] imx219: probe of 8-0010 failed with error -121 [ 1.887185] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.889964] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.889971] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.890414] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.890431] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.890441] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.890580] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.890592] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.890599] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.890745] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.890757] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.890763] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.890936] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.891763] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.891822] tegra_aotag tegra-aotag: Invalid temp readout [ 1.891849] tegra_aotag tegra-aotag: Invalid temp readout [ 1.891867] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.891875] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.892803] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.892822] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.893015] tegra_aotag tegra-aotag: Invalid temp readout [ 1.893045] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.893477] parse_throttle_dt_data: Num cap clks = 6 [ 1.893483] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.893498] parse_throttle_dt_data: clk=gpu type=4 [ 1.893528] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.893550] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.893573] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.893577] parse_throttle_dt_data: clk=emc type=3 [ 1.894041] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.894150] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.894290] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.895144] FAN dev name: pwm-fan [ 1.895226] FAN:gpio request success. [ 1.895286] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.895621] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.895780] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.895793] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.895890] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.895896] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.895902] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.895907] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.895912] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.895916] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.895921] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.895925] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.895931] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.895936] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.898702] device-mapper: uevent: version 1.0.3 [ 1.899183] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.904428] tegra210-cpufreq cpufreq: probe()...completed [ 1.905148] sdhci: Secure Digital Host Controller Interface driver [ 1.905150] sdhci: Copyright(c) Pierre Ossman [ 1.905152] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.905639] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 1.906032] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 1.906157] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 1.911252] tegra-se 70012000.se: tegra_se_probe: complete [ 1.911777] hidraw: raw HID events driver (C) Jiri Kosina [ 1.912879] usbcore: registered new interface driver usbhid [ 1.912882] usbhid: USB HID core driver [ 1.915028] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.915188] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.917161] nvpmodel: initialized successfully [ 1.918302] usbcore: registered new interface driver snd-usb-audio [ 1.918363] No Device Node present for smmu client: snd-soc-dummy !! [ 1.918368] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.918387] iommu: Adding device snd-soc-dummy to group 41 [ 1.924064] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.938750] OPE platform probe [ 1.938841] OPE platform probe successful [ 1.939098] OPE platform probe [ 1.939177] OPE platform probe successful [ 1.957974] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 1.962475] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.962625] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.962769] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.962892] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.963010] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.963131] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.963251] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.963371] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.963489] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.963609] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.975878] u32 classifier [ 1.975881] Actions configured [ 1.975949] Initializing XFRM netlink socket [ 1.976673] NET: Registered protocol family 10 [ 1.977345] NET: Registered protocol family 17 [ 1.977355] NET: Registered protocol family 15 [ 1.977428] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.977471] Bluetooth: RFCOMM socket layer initialized [ 1.977481] Bluetooth: RFCOMM ver 1.11 [ 1.977486] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.977491] Bluetooth: HIDP socket layer initialized [ 1.977510] 9pnet: Installing 9P2000 support [ 1.977547] Key type dns_resolver registered [ 1.977939] Registered cp15_barrier emulation handler [ 1.977945] Registered setend emulation handler [ 1.979019] registered taskstats version 1 [ 1.979628] Adding domain ve2-pd to PM domain host1x-pd [ 1.979865] Adding domain ve-pd to PM domain host1x-pd [ 1.981845] isp 54600000.isp: initialized [ 1.982772] isp 54680000.isp: initialized [ 1.993082] last reset is due to software reset [ 1.993087] KERNEL: PMC reset status reg: 0x3 [ 1.993146] BL: PMC reset status reg: 0x3 [ 1.993148] BL: PMIC poweroff Event Recorder: 0x0 [ 1.994610] clk_cbus_recalc_rate: no gbus parent [ 1.994616] clk_cbus_round_rate: no gbus parent [ 1.994618] clk_cbus_round_rate: no gbus parent [ 1.994625] clk_cbus_recalc_rate: no gbus parent [ 1.994742] clk_cbus_recalc_rate: no gbus parent [ 1.994746] clk_cbus_round_rate: no gbus parent [ 1.994748] clk_cbus_round_rate: no gbus parent [ 1.994752] clk_cbus_recalc_rate: no gbus parent [ 1.995436] tegra_dvfs: GPU-cap: registered [ 1.995490] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.995493] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 1.995495] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled [ 1.996825] tegra_dvfs: vdd-gpu-vts: registered [ 1.997478] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.997678] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.998196] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.998742] input: gpio-keys as /devices/gpio-keys/input/input1 [ 2.030783] tegra_rtc 7000e000.rtc: setting system clock to 2022-03-28 16:22:30 UTC (1648484550) [ 2.031408] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 2.031413] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.031416] usb 1-2: Product: 4-Port USB 2.1 Hub [ 2.031420] usb 1-2: Manufacturer: Generic [ 2.032164] vi 54080000.vi: vi_probe: ++ [ 2.032421] hub 1-2:1.0: USB hub found [ 2.033011] hub 1-2:1.0: 4 ports detected [ 2.035519] vi 54080000.vi: initialized [ 2.037553] vi 54080000.vi: subdev nvcsi--2 bound [ 2.037679] vi 54080000.vi: subdev nvcsi--1 bound [ 2.039247] Disable partitions left on by BL [ 2.039251] disb [ 2.039300] bwmgr: missing cdev-type property [ 2.039395] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.039401] DRAM derating cdev registered. [ 2.040254] ALSA device list: [ 2.040258] #0: tegra-hda at 0x70038000 irq 83 [ 2.040260] #1: tegra-snd-t210ref-mobile-rt565x [ 2.043601] Freeing unused kernel memory: 8640K [ 2.068544] Root device found: mmcblk0p1 [ 2.069694] tegra_cec 70015000.tegra_cec: Can't find physical addresse. [ 2.069698] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.142078] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 2.157670] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 2.164746] mmc0: hw tuning done ... [ 2.164780] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 2.169204] mmcblk0: mmc0:aaaa SB64G 59.5 GiB [ 2.170599] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 2.170605] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.170609] usb 2-1: Product: 4-Port USB 3.1 Hub [ 2.170613] usb 2-1: Manufacturer: Generic [ 2.173951] hub 2-1:1.0: USB hub found [ 2.174734] hub 2-1:1.0: 4 ports detected [ 2.174779] mmcblk0: p1 [ 2.177675] usb 1-2: usb_suspend_both: status 0 [ 2.177765] usb usb1: usb_suspend_both: status 0 [ 2.273567] Found dev node: /dev/mmcblk0p1 [ 2.320282] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.322243] Rootfs mounted over mmcblk0p1 [ 2.325687] usb 2-1: usb_suspend_both: status 0 [ 2.325842] usb usb2: usb_suspend_both: status 0 [ 2.356205] Switching from initrd to actual rootfs [ 2.575784] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.588139] cgroup: cgroup2: unknown option "nsdelegate" [ 2.611066] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.611854] systemd[1]: Detected architecture arm64. [ 2.641141] systemd[1]: Set hostname to . [ 2.763653] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.763662] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.918436] random: systemd: uninitialized urandom read (16 bytes read) [ 2.920420] systemd[1]: Created slice User and Session Slice. [ 2.920558] random: systemd: uninitialized urandom read (16 bytes read) [ 2.920579] systemd[1]: Reached target Swap. [ 2.920625] random: systemd: uninitialized urandom read (16 bytes read) [ 2.921400] systemd[1]: Created slice System Slice. [ 2.921598] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.921780] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 2.987219] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.111193] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 3.159819] systemd-journald[1992]: Received request to flush runtime journal from PID 1 [ 3.830348] using random self ethernet address [ 3.834973] using random host ethernet address [ 3.985706] tegra-xusb 70090000.xusb: entering ELPG [ 3.986827] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 3 [ 3.987031] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0 [ 3.988653] tegra-xusb 70090000.xusb: entering ELPG done [ 4.204801] random: crng init done [ 4.208206] random: 7 urandom warning(s) missed due to ratelimiting [ 4.397136] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.397158] cpu-throttle-alert cooling device registered. [ 4.397358] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.397374] gpu-throttle-alert cooling device registered. [ 4.397578] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.397591] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.397606] hot-surface-alert cooling device registered. [ 5.136595] Mass Storage Function, version: 2009/09/11 [ 5.136601] LUN: removable file: (no medium) [ 5.141464] using random self ethernet address [ 5.145966] using random host ethernet address [ 5.239389] rndis0: HOST MAC 5e:8f:62:25:f2:94 [ 5.239766] rndis0: MAC 5e:8f:62:25:f2:95 [ 5.242847] usb0: HOST MAC 5e:8f:62:25:f2:96 [ 5.242879] usb0: MAC 5e:8f:62:25:f2:97 [ 5.242905] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 5.244650] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 5.244672] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 5.244705] tegra-xudc-new 700d0000.xudc: entering ELPG [ 5.245100] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 5.245130] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 5.245760] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 5.245776] tegra-xudc-new 700d0000.xudc: entering ELPG [ 5.246136] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 5.251825] l4tbr0: port 1(rndis0) entered blocking state [ 5.251829] l4tbr0: port 1(rndis0) entered disabled state [ 5.252006] device rndis0 entered promiscuous mode [ 5.261027] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 5.268123] l4tbr0: port 2(usb0) entered blocking state [ 5.268128] l4tbr0: port 2(usb0) entered disabled state [ 5.270864] device usb0 entered promiscuous mode [ 5.278312] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 6.014193] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.019741] eth0: 0xffffff800a3ae000, 00:04:4b:eb:dd:88, IRQ 406 [ 6.078684] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.700589] zram: Added device: zram0 [ 6.702243] zram: Added device: zram1 [ 6.702905] zram: Added device: zram2 [ 6.703766] zram: Added device: zram3 [ 6.719543] zram0: detected capacity change from 0 to 519585792 [ 6.834944] Adding 507404k swap on /dev/zram0. Priority:5 extents:1 across:507404k SS [ 6.839069] zram1: detected capacity change from 0 to 519585792 [ 6.849404] Adding 507404k swap on /dev/zram1. Priority:5 extents:1 across:507404k SS [ 6.853915] zram2: detected capacity change from 0 to 519585792 [ 6.865309] Adding 507404k swap on /dev/zram2. Priority:5 extents:1 across:507404k SS [ 6.869760] zram3: detected capacity change from 0 to 519585792 [ 6.880913] Adding 507404k swap on /dev/zram3. Priority:5 extents:1 across:507404k SS [ 8.272857] Bridge firewalling registered [ 8.305087] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 8.628386] Netfilter messages via NETLINK v0.30. [ 8.631771] ctnetlink v0.93: registering with nfnetlink. [ 8.967162] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 9.037219] tegradc tegradc.0: blank - powerdown [ 9.037230] tegradc tegradc.1: blank - powerdown [ 9.141683] r8168: eth0: link up [ 9.141727] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.489604] fuse init (API version 7.26) [ 12.754733] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.754742] Bluetooth: BNEP socket layer initialized [ 33.907872] vdd-fan: disabling [ 33.907919] vdd-usb-vbus: disabling [ 33.907953] vdd-usb-vbus2: disabling [ 33.908056] vddio-sdmmc3-ap: disabling [ 33.908413] avdd-io-edp-1v05: disabling [ 33.908447] vdd-usb-hub-en: disabling [ 2032.988974] r8168 0000:02:00.0: invalid short VPD tag 00 at offset 1 [ 2594.342846] xr17v35x: loading out-of-tree module taints kernel. [ 2594.349689] Exar PCIe (XR17V35x) serial driver Revision: 2.6