[ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514560 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=2048M@2048M section=256M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 core_edp_mv=1075 core_edp_ma=4000 gpt tegra_fbmem=0x800000@0x92ca9000 is_hdmi_initialised=1 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29964(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 1938100K/2091008K available (15358K kernel code, 2956K rwdata, 6692K rodata, 8640K init, 612K bss, 87372K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf02000000 ( 32 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001532] Console: colour dummy device 80x25 [ 0.001542] console [tty0] enabled [ 0.001548] bootconsole [uart8250] disabled [ 0.001571] kmemleak: Kernel memory leak detector disabled [ 0.001589] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001604] pid_max: default: 32768 minimum: 301 [ 0.002052] Security Framework initialized [ 0.002273] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.002279] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.003385] ftrace: allocating 47077 entries in 184 pages [ 0.172535] sched-energy: CPU device node has no sched-energy-costs [ 0.172571] ASID allocator initialised with 65536 entries [ 0.211521] tegra-id: chipid=22117. [ 0.211533] tegra-id: opt_subrevision=0. [ 0.211551] Tegra Speedo/IDDQ fuse revision 4 [ 0.211556] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.211560] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.211566] Tegra: CPU Speedo Value 2074, SoC Speedo Value 1967, GPU Speedo Value 2064 [ 0.211570] Tegra: CPU IDDQ Value 2440, SoC IDDQ Value 2608, GPU IDDQ Value 3085 [ 0.211591] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.211609] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/batuu/kernel-dts/tegra210-p3448-0003-p3542-0000.dts [ 0.211618] DTB Build time: Jul 26 2021 12:16:35 [ 0.261084] CPU1: Booted secondary processor [411fd071] [ 0.292976] CPU2: Booted secondary processor [411fd071] [ 0.324940] CPU3: Booted secondary processor [411fd071] [ 0.325021] Brought up 4 CPUs [ 0.325027] SMP: Total of 4 processors activated. [ 0.325036] CPU features: detected feature: 32-bit EL0 Support [ 0.325329] CPU: All CPU(s) started at EL2 [ 0.325346] alternatives: patching kernel code [ 0.333071] devtmpfs: initialized [ 0.369892] Initilizing CustomIPI irq domain [ 0.370215] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.370237] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.372019] pinctrl core: initialized pinctrl subsystem [ 0.372485] OS set in device tree is not L4T. [ 0.372884] regulator-dummy: no parameters [ 0.373199] Initializing plugin-manager [ 0.373346] Plugin module not found [ 0.373676] node /plugin-manager/fragment@1 match with board >=3448-0003-400 [ 0.374843] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.375047] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.375542] node /plugin-manager/fragment@12 match with board >=3448-0003-400 [ 0.375803] node /plugin-manager/fragement@13 match with board >=3448-0003-400 [ 0.379352] NET: Registered protocol family 16 [ 0.380642] pstore: using zlib compression [ 0.380676] console [pstore-1] enabled [ 0.380680] pstore: Registered ramoops as persistent store backend [ 0.380685] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.393103] cpuidle: using governor menu [ 0.396094] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.397757] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.397779] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.401611] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.403844] Serial: AMBA PL011 UART driver [ 0.404348] tegra_powergate_init: DONE [ 0.404363] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/batuu/kernel-dts/tegra210-p3448-0003-p3542-0000.dts [ 0.404369] DTB Build time: Jul 26 2021 12:16:35 [ 0.406054] Tegra reboot handler registered. [ 0.410575] iommu: Adding device tegra-carveouts to group 0 [ 0.410685] platform tegra-carveouts: domain=ffffffc078ae7258 allocates as[0]=ffffffc0784200a8 [ 0.411057] iommu: Adding device smmu_test to group 1 [ 0.411108] platform smmu_test: domain=ffffffc078ae7498 allocates as[0]=ffffffc078420110 [ 0.411919] mc: mapped MMIO address: 0xffffff8008041000 -> 0x70019000 [ 0.411972] mc: mapped MMIO address: 0xffffff8008067000 -> 0x7001c000 [ 0.412029] mc: mapped MMIO address: 0xffffff800807b000 -> 0x7001d000 [ 0.412040] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.412077] mc-err: mcerr ops are set to t21x [ 0.422867] iommu: Adding device 70090000.xusb to group 2 [ 0.423145] iommu: Adding device 70006000.serial to group 3 [ 0.423202] platform 70006000.serial: domain=ffffffc0784a8498 allocates as[0]=ffffffc078420178 [ 0.423620] iommu: Adding device 70006040.serial to group 4 [ 0.423888] iommu: Adding device 70006200.serial to group 5 [ 0.424109] iommu: Adding device sound to group 6 [ 0.424156] platform sound: domain=ffffffc0784a89d8 allocates as[0]=ffffffc0784201e0 [ 0.424704] iommu: Adding device 7000d400.spi to group 7 [ 0.424957] iommu: Adding device 7000d600.spi to group 8 [ 0.425286] iommu: Adding device 70410000.spi to group 9 [ 0.425603] iommu: Adding device 50000000.host1x to group 10 [ 0.425880] iommu: Adding device 54080000.vi to group 11 [ 0.426278] iommu: Adding device 54600000.isp to group 12 [ 0.426568] iommu: Adding device 54680000.isp to group 13 [ 0.426833] iommu: Adding device tegradc.0 to group 14 [ 0.426888] platform tegradc.0: domain=ffffffc0784b5918 allocates as[0]=ffffffc078420248 [ 0.431192] platform tegradc.0: IOVA linear map 0x0000000092ca9000(800000) [ 0.431477] iommu: Adding device 54340000.vic to group 15 [ 0.431680] iommu: Adding device 544c0000.nvenc to group 16 [ 0.431873] iommu: Adding device 54500000.tsec to group 17 [ 0.432085] iommu: Adding device 54100000.tsecb to group 18 [ 0.432280] iommu: Adding device 54480000.nvdec to group 19 [ 0.432461] iommu: Adding device 54380000.nvjpg to group 20 [ 0.433228] iommu: Adding device 546c0000.i2c to group 21 [ 0.433571] iommu: Adding device 57000000.gpu to group 22 [ 0.433617] platform 57000000.gpu: domain=ffffffc0784c4798 allocates as[0]=ffffffc0784202b0 [ 0.433652] platform 57000000.gpu: domain=ffffffc0784c4798 allocates as[1]=ffffffc078420318 [ 0.433689] platform 57000000.gpu: domain=ffffffc0784c4798 allocates as[2]=ffffffc078420380 [ 0.433730] platform 57000000.gpu: domain=ffffffc0784c4798 allocates as[3]=ffffffc0784203e8 [ 0.434618] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.434629] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.434642] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.434645] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.434649] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.485145] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.485153] tegra-pmc: Clear bootloader IO dpd settings [ 0.485172] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.485236] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.485532] iommu: Adding device 70012000.se to group 23 [ 0.486295] iommu: Adding device 7000c000.i2c to group 24 [ 0.486549] iommu: Adding device 7000c400.i2c to group 25 [ 0.486800] iommu: Adding device 7000c500.i2c to group 26 [ 0.487062] iommu: Adding device 7000c700.i2c to group 27 [ 0.487307] iommu: Adding device 7000d000.i2c to group 28 [ 0.487583] iommu: Adding device 7000d100.i2c to group 29 [ 0.487876] iommu: Adding device sdhci-tegra.0 to group 30 [ 0.487933] platform sdhci-tegra.0: domain=ffffffc07853a918 allocates as[0]=ffffffc078420450 [ 0.488778] iommu: Adding device 700d0000.xudc to group 31 [ 0.492077] vdd-ac-bat: 5000 mV [ 0.492445] vdd-5v0-sys: 5000 mV [ 0.493139] vdd-5v0-hdmi: 5000 mV [ 0.493585] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.493849] vdd-1v8-sys: 1800 mV [ 0.494216] vdd-fan: 5000 mV [ 0.494430] vdd-fan: supplied by vdd-5v0-sys [ 0.494644] vdd-usb-vbus: 5000 mV [ 0.494894] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.495256] vdd-usb-vbus2: 5000 mV [ 0.526230] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.528467] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.529657] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.529685] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.530011] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.538205] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.538558] SCSI subsystem initialized [ 0.538738] libata version 3.00 loaded. [ 0.538975] usbcore: registered new interface driver usbfs [ 0.539019] usbcore: registered new interface driver hub [ 0.539070] usbcore: registered new device driver usb [ 0.543075] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.548354] vdd-core: 600 <--> 1162 mV at 1075 mV [ 0.549498] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.549593] random: fast init done [ 0.552978] vdd-ddr-1v1: 1150 mV [ 0.556960] vdd-pre-reg-1v35: 1350 mV [ 0.560959] vdd-1v8: 1800 mV [ 0.564960] avdd-sys-1v2: 1200 mV [ 0.568963] vdd-pex-1v0: 1050 mV [ 0.569623] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.570191] max77620-ldo3: at 3100 mV [ 0.572964] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.573500] max77620-ldo5: at 3100 mV [ 0.576957] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.580960] avdd-1v05-pll: 1050 mV [ 0.584959] avdd-io-hdmi-dp: 1050 mV [ 0.587619] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.587921] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.588211] max77620 4-003c: max77620 probe successful [ 0.590942] media: Linux media interface: v0.10 [ 0.590999] Linux video capture interface: v2.00 [ 0.591895] pps_core: LinuxPPS API ver. 1 registered [ 0.591901] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.591927] PTP clock support registered [ 0.595118] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.596049] Advanced Linux Sound Architecture Driver Initialized. [ 0.596743] Bluetooth: Core ver 2.22 [ 0.596792] NET: Registered protocol family 31 [ 0.596796] Bluetooth: HCI device and connection manager initialized [ 0.596810] Bluetooth: HCI socket layer initialized [ 0.596818] Bluetooth: L2CAP socket layer initialized [ 0.596847] Bluetooth: SCO socket layer initialized [ 0.598748] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.598767] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.598821] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.598838] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.602040] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.603224] vdd-3v3-sys: 3300 mV [ 0.603613] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.603665] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.604311] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.604745] vdd-3v3-sd: 3300 mV [ 0.605166] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.605847] avdd-io-edp-1v05: 1050 mV [ 0.606199] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.606336] vdd-usb-hub-en: 5000 mV [ 0.606678] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.607761] camchar: rtcpu character device driver loaded [ 0.608548] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.609923] clocksource: Switched to clocksource arch_sys_counter [ 0.650496] VFS: Disk quotas dquot_6.6.0 [ 0.650629] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.651128] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.651576] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.651587] nvmap_page_pool_init: Total RAM pages: 500909 [ 0.651592] nvmap_page_pool_init: nvmap page pool size: 62613 pages (244 MB) [ 0.651789] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.652114] misc nvmap: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.652333] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.661509] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.662049] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.662467] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.662755] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.662942] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.663236] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.663242] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.663697] NET: Registered protocol family 2 [ 0.664704] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.664819] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.665099] TCP: Hash tables configured (established 16384 bind 16384) [ 0.665252] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.665295] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.665654] NET: Registered protocol family 1 [ 0.666442] RPC: Registered named UNIX socket transport module. [ 0.666448] RPC: Registered udp transport module. [ 0.666452] RPC: Registered tcp transport module. [ 0.666457] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.666472] PCI: CLS 0 bytes, default 64 [ 0.666703] Trying to unpack rootfs image as initramfs... [ 0.971847] Freeing initrd memory: 6992K [ 0.981623] host1x 50000000.host1x: initialized [ 0.983531] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.986838] audit: initializing netlink subsys (disabled) [ 0.986902] audit: type=2000 audit(0.839:1): initialized [ 0.987636] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.997632] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.999140] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.999922] 9p: Installing v9fs 9p2000 file system support [ 1.003379] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.003499] io scheduler noop registered [ 1.003788] io scheduler cfq registered (default) [ 1.006590] gic 702f9000.agic: GIC IRQ controller registered [ 1.009555] iommu: Adding device 702ef000.adsp to group 32 [ 1.018880] iommu: Adding device aconnect@702c0000:adsp_audio to group 33 [ 1.019036] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.019680] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x71a6410 [ 1.019688] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.021331] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.021438] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.021529] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.021725] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.021819] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.021981] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.022086] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.022175] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.022267] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.022358] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.023011] tegra-xusb-padctl 7009f000.xusb_padctl: failed to setup XUSB ports: -517 [ 1.029408] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.031108] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.032975] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.033011] tegra-pcie 1003000.pcie: PHY get deferred: -517 [ 1.033017] tegra-pcie 1003000.pcie: failed to get PHYs: -517 [ 1.034601] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.034816] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000 [ 1.035046] Adding domain tsec-pd to PM domain host1x-pd [ 1.037801] tsec 54500000.tsec: initialized [ 1.039237] tsec 54100000.tsecb: initialized [ 1.039908] Adding domain nvdec-pd to PM domain host1x-pd [ 1.043263] nvdec 54480000.nvdec: initialized [ 1.044312] Adding domain vic03-pd to PM domain host1x-pd [ 1.044500] Adding domain msenc-pd to PM domain host1x-pd [ 1.044658] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.048514] falcon 54340000.vic: initialized [ 1.049763] falcon 544c0000.nvenc: initialized [ 1.051106] falcon 54380000.nvjpg: initialized [ 1.055489] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=95 [ 1.055538] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.055574] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.055579] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.055672] display board info: id 0x0, fab 0x0 [ 1.055722] generic_infoframe_type: 0x87 [ 1.055855] tegradc tegradc.0: DT parsed successfully [ 1.055884] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.055890] tegra_cec 70015000.tegra_cec: probed [ 1.055903] tegradc tegradc.0: Display dc.ffffff800abc0000 registered with id=0 [ 1.056487] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781 [ 1.063595] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.068081] tegradc tegradc.0: probed [ 1.069144] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.070817] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.070829] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.071457] kfuse 7000fc00.kfuse: initialized [ 1.073111] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.074216] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.075755] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.075770] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.076314] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.077985] vdd-gpu: applied init 1000000uV constraint [ 1.077993] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.078436] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.083393] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.083551] No Device Node present for smmu client: serial8250 !! [ 1.083562] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.083632] iommu: Adding device serial8250 to group 34 [ 1.087470] console [ttyS0] disabled [ 1.087642] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.087812] console [ttyS0] enabled [ 1.089070] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.089533] serial-tegra 70006200.serial: RX in PIO mode [ 1.089649] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.091143] [drm] Initialized [ 1.099844] Console: switching to colour frame buffer device 240x67 [ 1.099978] tegradc tegradc.0: fb registered [ 1.103370] brd: module loaded [ 1.107354] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 1.107408] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m [ 1.107957] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 1.107970] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 1.109001] loop: module loaded [ 1.109088] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.109217] tegra_profiler: auth: init [ 1.110571] THERMAL EST: found 2 subdevs [ 1.110580] THERMAL EST num_resources: 0 [ 1.110587] [THERMAL EST subdev 0] [ 1.110595] [THERMAL EST subdev 1] [ 1.111057] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.111061] THERMAL EST: thz register success. [ 1.111219] THERMAL EST: end of probe, return err: 0 [ 1.112422] sd: No Scsi addr parsed to reserve index [ 1.112460] hisi_sas: driver version v1.6 [ 1.117396] tegra-qspi 70410000.spi: Prod settings list not found [ 1.118638] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 1.118648] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 1.121854] libphy: Fixed MDIO Bus: probed [ 1.122650] tun: Universal TUN/TAP device driver, 1.6 [ 1.122656] tun: (C) 1999-2004 Max Krasnyansky [ 1.123717] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.123723] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.123774] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.123778] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.123823] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.123827] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.123874] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.123878] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.125037] PPP generic driver version 2.4.2 [ 1.125254] PPP BSD Compression module registered [ 1.125264] PPP Deflate Compression module registered [ 1.125311] PPP MPPE Compression module registered [ 1.125318] NET: Registered protocol family 24 [ 1.125393] usbcore: registered new interface driver r8152 [ 1.125440] usbcore: registered new interface driver asix [ 1.125503] usbcore: registered new interface driver ax88179_178a [ 1.125548] usbcore: registered new interface driver cdc_ether [ 1.125586] usbcore: registered new interface driver net1080 [ 1.125623] usbcore: registered new interface driver cdc_subset [ 1.125661] usbcore: registered new interface driver zaurus [ 1.125721] usbcore: registered new interface driver cdc_ncm [ 1.125883] VFIO - User Level meta-driver version: 0.3 [ 1.127393] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.127417] ehci-pci: EHCI PCI platform driver [ 1.127462] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.127475] ohci-pci: OHCI PCI platform driver [ 1.127517] ohci-platform: OHCI generic platform driver [ 1.129359] usbcore: registered new interface driver uas [ 1.129417] usbcore: registered new interface driver usb-storage [ 1.129541] usbcore: registered new interface driver usbserial [ 1.133497] mousedev: PS/2 mouse device common for all mice [ 1.133590] usbcore: registered new interface driver xpad [ 1.134464] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.134472] Extcon AUX1(HDMI) enable [ 1.172017] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244 [ 1.258569] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.260728] rtc rtc1: alarm rtc device [ 1.260743] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.260762] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.261112] i2c /dev entries driver [ 1.262818] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.269445] tegradc tegradc.0: blank - powerdown [ 1.286084] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.286154] imx219 6-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.286223] imx219 6-0010: board setup failed [ 1.286272] imx219: probe of 6-0010 failed with error -121 [ 1.287366] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.289377] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.289381] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.289690] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.289703] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.289711] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.289833] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.289843] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.289850] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.290020] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.290029] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.290034] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.290203] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.290745] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.290790] tegra_aotag tegra-aotag: Invalid temp readout [ 1.290810] tegra_aotag tegra-aotag: Invalid temp readout [ 1.290826] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.290834] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.291588] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.291603] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.291746] tegra_aotag tegra-aotag: Invalid temp readout [ 1.291769] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.292103] parse_throttle_dt_data: Num cap clks = 6 [ 1.292107] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.292113] parse_throttle_dt_data: clk=gpu type=4 [ 1.292132] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.292149] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.292168] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.292171] parse_throttle_dt_data: clk=emc type=3 [ 1.292462] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.292552] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.292654] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.293246] FAN dev name: pwm-fan [ 1.293288] FAN:gpio request success. [ 1.293330] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.293572] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.293694] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.293700] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.293775] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.293780] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.293784] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.293788] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.293791] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.293795] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.293799] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.293802] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.293806] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.293811] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.296093] device-mapper: uevent: version 1.0.3 [ 1.296473] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.299091] tegra210-cpufreq cpufreq: probe()...completed [ 1.299770] sdhci: Secure Digital Host Controller Interface driver [ 1.299771] sdhci: Copyright(c) Pierre Ossman [ 1.299772] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.300238] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 1.300592] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 1.300718] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 298 [ 1.305004] tegra-se 70012000.se: tegra_se_probe: complete [ 1.305476] hidraw: raw HID events driver (C) Jiri Kosina [ 1.306597] usbcore: registered new interface driver usbhid [ 1.306598] usbhid: USB HID core driver [ 1.307482] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.308363] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.309563] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 1.309565] Extcon AUX1(HDMI) disable [ 1.310604] nvpmodel: initialized successfully [ 1.311557] usbcore: registered new interface driver snd-usb-audio [ 1.311618] No Device Node present for smmu client: snd-soc-dummy !! [ 1.311622] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.311638] iommu: Adding device snd-soc-dummy to group 35 [ 1.326879] snd_hda_codec_hdmi hdaudioC0D3: HDMI: invalid ELD data byte 43 [ 1.327021] snd_hda_codec_hdmi hdaudioC0D3: HDMI: invalid ELD data byte 0 [ 1.327024] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1.327412] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.328442] OPE platform probe [ 1.328522] OPE platform probe successful [ 1.328776] OPE platform probe [ 1.328856] OPE platform probe successful [ 1.346142] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 1.352872] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.353002] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.353166] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.353294] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.353422] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.353554] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.353681] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.353807] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.353977] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.354104] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.357589] tegradc tegradc.0: unblank [ 1.365596] u32 classifier [ 1.365597] Actions configured [ 1.365669] Initializing XFRM netlink socket [ 1.366398] NET: Registered protocol family 10 [ 1.367064] NET: Registered protocol family 17 [ 1.367075] NET: Registered protocol family 15 [ 1.367145] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.367192] Bluetooth: RFCOMM socket layer initialized [ 1.367200] Bluetooth: RFCOMM ver 1.11 [ 1.367205] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.367209] Bluetooth: HIDP socket layer initialized [ 1.367226] 9pnet: Installing 9P2000 support [ 1.367259] Key type dns_resolver registered [ 1.367627] Registered cp15_barrier emulation handler [ 1.367633] Registered setend emulation handler [ 1.368657] registered taskstats version 1 [ 1.369180] Adding domain ve2-pd to PM domain host1x-pd [ 1.369221] tegradc tegradc.0: nominal-pclk:241500000 parent:241500000 div:1.0 pclk:241500000 239085000~263235000 [ 1.369284] tegradc tegradc.0: hdmi: tmds rate:241500K prod-setting:prod_c_hdmi_150m_300m [ 1.369436] Adding domain ve-pd to PM domain host1x-pd [ 1.371105] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.371392] isp 54600000.isp: initialized [ 1.372340] isp 54680000.isp: initialized [ 1.384799] last reset is due to power on reset [ 1.384802] KERNEL: PMC reset status reg: 0x0 [ 1.384858] BL: PMC reset status reg: 0x0 [ 1.384860] BL: PMIC poweroff Event Recorder: 0x40 [ 1.385396] vdd-usb-vbus-en: 5000 mV [ 1.385730] vdd-usb-vbus-en: supplied by vdd-5v0-sys [ 1.386714] clk_cbus_recalc_rate: no gbus parent [ 1.386718] clk_cbus_round_rate: no gbus parent [ 1.386720] clk_cbus_round_rate: no gbus parent [ 1.386726] clk_cbus_recalc_rate: no gbus parent [ 1.386824] clk_cbus_recalc_rate: no gbus parent [ 1.386827] clk_cbus_round_rate: no gbus parent [ 1.386828] clk_cbus_round_rate: no gbus parent [ 1.386831] clk_cbus_recalc_rate: no gbus parent [ 1.387496] tegra_dvfs: GPU-cap: registered [ 1.387549] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.387551] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 1.387552] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled [ 1.388943] tegra_dvfs: vdd-gpu-vts: registered [ 1.389084] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x71a6410 [ 1.389089] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.389785] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.389850] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.389990] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.390104] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.390158] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.390216] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.390273] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.390330] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.390384] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.390440] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.391746] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.393691] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.393814] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.395443] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.396239] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.396556] tegra-xusb 70090000.xusb: extcon 0: ffffffc0795d3800 id [ 1.398088] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.398369] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.398983] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.398988] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.399410] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.399849] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.400020] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release [ 1.400042] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.400054] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.400392] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.401013] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.401192] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.401216] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.401316] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.401320] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.401323] usb usb1: Product: xHCI Host Controller [ 1.401325] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.401328] usb usb1: SerialNumber: 70090000.xusb [ 1.401561] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.401693] hub 1-0:1.0: USB hub found [ 1.401718] hub 1-0:1.0: 5 ports detected [ 1.402082] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.402089] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.402134] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.402187] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.402191] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.402194] usb usb2: Product: xHCI Host Controller [ 1.402196] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.402198] usb usb2: SerialNumber: 70090000.xusb [ 1.402513] hub 2-0:1.0: USB hub found [ 1.402538] hub 2-0:1.0: 4 ports detected [ 1.403170] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.403174] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.405827] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.405829] Extcon AUX1(HDMI) enable [ 1.421360] tegradc tegradc.0: sync windows ret = 247 [ 1.435143] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:11 UTC (946688411) [ 1.436103] vi 54080000.vi: vi_probe: ++ [ 1.439684] vi 54080000.vi: initialized [ 1.441742] vi 54080000.vi: subdev nvcsi--1 bound [ 1.442602] Disable partitions left on by BL [ 1.442604] disb [ 1.442643] bwmgr: missing cdev-type property [ 1.442735] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.442741] DRAM derating cdev registered. [ 1.443720] ALSA device list: [ 1.443723] #0: tegra-hda at 0x70038000 irq 81 [ 1.443725] #1: tegra-snd-t210ref-mobile-rt565x [ 1.464873] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.464876] Extcon HDMI: HPD enabled [ 1.464895] tegradc tegradc.0: hdmi: plugged [ 1.467905] Freeing unused kernel memory: 8640K [ 1.491816] Root device found: mmcblk0p1 [ 1.507117] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.507183] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 1.508399] usb usb2: usb_suspend_both: status 0 [ 1.555997] mmc0: hw tuning done ... [ 1.556034] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 1.556441] mmcblk0: mmc0:aaaa SC64G 59.5 GiB [ 1.561680] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 1.696730] Found dev node: /dev/mmcblk0p1 [ 1.729944] usb 1-2: new full-speed USB device number 2 using tegra-xusb [ 1.751615] usb 1-2: New USB device found, idVendor=10c4, idProduct=ea60 [ 1.751620] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.751623] usb 1-2: Product: CP2102 USB to UART Bridge Controller [ 1.751626] usb 1-2: Manufacturer: Silicon Labs [ 1.751629] usb 1-2: SerialNumber: 0001 [ 1.826546] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.869931] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 1.890540] usb 1-3: New USB device found, idVendor=1a40, idProduct=0801 [ 1.890544] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.890547] usb 1-3: Product: USB 2.0 Hub [ 1.891299] hub 1-3:1.0: USB hub found [ 1.891354] hub 1-3:1.0: 4 ports detected [ 1.954323] EXT4-fs (mmcblk0p1): recovery complete [ 1.955262] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.957084] Rootfs mounted over mmcblk0p1 [ 1.980933] Switching from initrd to actual rootfs [ 2.065940] tegra_cec 70015000.tegra_cec: physical address: 10:00. [ 2.154199] systemd[1]: System time before build time, advancing clock. [ 2.173698] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.185590] cgroup: cgroup2: unknown option "nsdelegate" [ 2.197950] usb 1-3.1: new low-speed USB device number 4 using tegra-xusb [ 2.213450] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.214237] systemd[1]: Detected architecture arm64. [ 2.222105] usb 1-3.1: New USB device found, idVendor=18f8, idProduct=1286 [ 2.222109] usb 1-3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.222113] usb 1-3.1: Product: USB GAMING MOUSE [ 2.225400] input: USB GAMING MOUSE as /devices/70090000.xusb/usb1/1-3/1-3.1/1-3.1:1.0/0003:18F8:1286.0001/input/input2 [ 2.225681] hid-generic 0003:18F8:1286.0001: input,hidraw0: USB HID v1.10 Mouse [USB GAMING MOUSE ] on usb-70090000.xusb-3.1/input0 [ 2.230253] input: USB GAMING MOUSE as /devices/70090000.xusb/usb1/1-3/1-3.1/1-3.1:1.1/0003:18F8:1286.0002/input/input3 [ 2.231935] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.243242] systemd[1]: Set hostname to . [ 2.290285] hid-generic 0003:18F8:1286.0002: input,hidraw1: USB HID v1.10 Keyboard [USB GAMING MOUSE ] on usb-70090000.xusb-3.1/input1 [ 2.351452] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.351461] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.389936] usb 1-3.2: new low-speed USB device number 5 using tegra-xusb [ 2.415965] usb 1-3.2: New USB device found, idVendor=1a2c, idProduct=4d7e [ 2.415971] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.415975] usb 1-3.2: Product: USB Keyboard [ 2.415978] usb 1-3.2: Manufacturer: SEMICO [ 2.420649] input: SEMICO USB Keyboard as /devices/70090000.xusb/usb1/1-3/1-3.2/1-3.2:1.0/0003:1A2C:4D7E.0003/input/input4 [ 2.478544] hid-generic 0003:1A2C:4D7E.0003: input,hidraw2: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-70090000.xusb-3.2/input0 [ 2.484910] input: SEMICO USB Keyboard as /devices/70090000.xusb/usb1/1-3/1-3.2/1-3.2:1.1/0003:1A2C:4D7E.0004/input/input5 [ 2.484988] random: systemd: uninitialized urandom read (16 bytes read) [ 2.486853] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.486977] random: systemd: uninitialized urandom read (16 bytes read) [ 2.487097] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.487174] random: systemd: uninitialized urandom read (16 bytes read) [ 2.487196] systemd[1]: Reached target User and Group Name Lookups. [ 2.488679] systemd[1]: Created slice User and Session Slice. [ 2.489493] systemd[1]: Created slice System Slice. [ 2.542148] hid-generic 0003:1A2C:4D7E.0004: input,hidraw3: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-70090000.xusb-3.2/input1 [ 2.577885] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.659975] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.661955] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.675457] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 2.770285] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.770293] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.770297] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.770301] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.770305] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.770327] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.770388] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.770541] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.770650] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.770673] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.770703] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.770723] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.770858] pci 0000:01:00.0: supports D1 D2 [ 2.770861] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.782025] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.782057] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 2.782062] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.782069] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit] [ 2.782087] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit] [ 2.782104] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.782112] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.782116] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.782122] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] [ 2.782434] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.782438] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.782444] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.782539] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.782736] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.782753] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.802460] systemd-journald[1982]: Received request to flush runtime journal from PID 1 [ 2.805006] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.805080] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 48:b0:2d:2e:0e:0a from device tree [ 2.805527] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.805543] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.954697] Adding 4194300k swap on /swapfile. Priority:-1 extents:6 across:4521980k SS [ 3.845447] using random self ethernet address [ 3.850051] using random host ethernet address [ 3.924261] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.924284] cpu-throttle-alert cooling device registered. [ 3.924525] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.924541] gpu-throttle-alert cooling device registered. [ 3.924740] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.924752] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.924765] hot-surface-alert cooling device registered. [ 4.033106] random: crng init done [ 4.036540] random: 7 urandom warning(s) missed due to ratelimiting [ 4.209944] tegra_cec 70015000.tegra_cec: timeout in tegra_cec_native_write_l:172. [ 4.217642] tegra_cec 70015000.tegra_cec: Sent res: -62. [ 4.225940] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 4.552059] Mass Storage Function, version: 2009/09/11 [ 4.552066] LUN: removable file: (no medium) [ 4.558744] using random self ethernet address [ 4.558747] using random host ethernet address [ 4.643298] rndis0: HOST MAC f2:40:02:07:da:88 [ 4.643468] rndis0: MAC f2:40:02:07:da:89 [ 4.645605] usb0: HOST MAC f2:40:02:07:da:8a [ 4.645632] usb0: MAC f2:40:02:07:da:8b [ 4.645651] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 4.646247] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 4.646263] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 4.647768] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.648019] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.648025] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 4.648569] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 4.648579] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.648800] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.651499] l4tbr0: port 1(rndis0) entered blocking state [ 4.651501] l4tbr0: port 1(rndis0) entered disabled state [ 4.651668] device rndis0 entered promiscuous mode [ 4.659132] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 4.676300] l4tbr0: port 2(usb0) entered blocking state [ 4.676303] l4tbr0: port 2(usb0) entered disabled state [ 4.679865] device usb0 entered promiscuous mode [ 4.687723] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 4.878630] usbcore: registered new interface driver cp210x [ 4.878674] usbserial: USB Serial support registered for cp210x [ 4.878736] cp210x 1-2:1.0: cp210x converter detected [ 4.884057] usb 1-2: cp210x converter now attached to ttyUSB0 [ 5.808064] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.809084] eth0: 0xffffff800d9fc000, 48:b0:2d:2e:0e:0a, IRQ 405 [ 5.877679] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.976471] zram: Added device: zram0 [ 5.978715] zram: Added device: zram1 [ 5.979127] zram: Added device: zram2 [ 5.981418] zram: Added device: zram3 [ 6.023447] zram0: detected capacity change from 0 to 258465792 [ 6.081802] Adding 252404k swap on /dev/zram0. Priority:5 extents:1 across:252404k SS [ 6.089607] zram1: detected capacity change from 0 to 258465792 [ 6.112095] Adding 252404k swap on /dev/zram1. Priority:5 extents:1 across:252404k SS [ 6.116424] zram2: detected capacity change from 0 to 258465792 [ 6.141016] Adding 252404k swap on /dev/zram2. Priority:5 extents:1 across:252404k SS [ 6.150011] zram3: detected capacity change from 0 to 258465792 [ 6.175579] Adding 252404k swap on /dev/zram3. Priority:5 extents:1 across:252404k SS [ 7.958617] tegradc tegradc.0: unblank [ 7.976294] Bridge firewalling registered [ 8.001603] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 8.306086] Netfilter messages via NETLINK v0.30. [ 8.308593] ctnetlink v0.93: registering with nfnetlink. [ 8.491722] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 9.470852] fuse init (API version 7.26) [ 9.969954] r8168: eth0: link up [ 9.970036] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.859865] vdd-fan: disabling [ 31.859909] vdd-usb-vbus: disabling [ 31.859941] vdd-usb-vbus2: disabling [ 31.860040] vddio-sdmmc3-ap: disabling [ 31.860990] avdd-io-edp-1v05: disabling [ 31.861003] vdd-usb-hub-en: disabling [ 121.738716] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 121.738728] Bluetooth: BNEP socket layer initialized sachoi@sachoi-desktop:~/catkin_ws$