pu reaches 100500 mC [ 1.318047] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.318057] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.318063] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.318216] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.318225] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.318229] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.318403] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.318936] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.318981] tegra_aotag tegra-aotag: Invalid temp readout [ 1.319001] tegra_aotag tegra-aotag: Invalid temp readout [ 1.319016] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.319025] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.319861] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.319876] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.320026] tegra_aotag tegra-aotag: Invalid temp readout [ 1.320047] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.320412] parse_throttle_dt_data: Num cap clks = 6 [ 1.320416] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.320423] parse_throttle_dt_data: clk=gpu type=4 [ 1.320444] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.320461] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.320481] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.320484] parse_throttle_dt_data: clk=emc type=3 [ 1.320827] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.320921] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.321034] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.321617] FAN dev name: pwm-fan [ 1.321659] FAN:gpio request success. [ 1.321702] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.321959] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.322081] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.322088] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.322166] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.322171] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.322176] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.322180] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.322184] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.322188] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.322192] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.322196] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.322200] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.322204] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.324584] device-mapper: uevent: version 1.0.3 [ 1.325007] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.327577] tegra210-cpufreq cpufreq: probe()...completed [ 1.328295] sdhci: Secure Digital Host Controller Interface driver [ 1.328296] sdhci: Copyright(c) Pierre Ossman [ 1.328298] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.328786] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 1.329168] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 1.329291] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 298 [ 1.333874] tegra-se 70012000.se: tegra_se_probe: complete [ 1.334373] hidraw: raw HID events driver (C) Jiri Kosina [ 1.335610] usbcore: registered new interface driver usbhid [ 1.335611] usbhid: USB HID core driver [ 1.336580] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.336748] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.338887] nvpmodel: initialized successfully [ 1.339953] usbcore: registered new interface driver snd-usb-audio [ 1.340019] No Device Node present for smmu client: snd-soc-dummy !! [ 1.340023] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.340040] iommu: Adding device snd-soc-dummy to group 35 [ 1.345547] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.361339] OPE platform probe [ 1.361425] OPE platform probe successful [ 1.361681] OPE platform probe [ 1.361755] OPE platform probe successful [ 1.362246] tegradc tegradc.0: unblank [ 1.373999] tegradc tegradc.0: nominal-pclk:241500000 parent:241500000 div:1.0 pclk:241500000 239085000~263235000 [ 1.374082] tegradc tegradc.0: hdmi: tmds rate:241500K prod-setting:prod_c_hdmi_150m_300m [ 1.374153] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 1.375125] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.385885] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.386074] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.386200] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.386326] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.386455] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.386581] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.386707] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.386841] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.386965] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.387088] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.398588] u32 classifier [ 1.398590] Actions configured [ 1.398659] Initializing XFRM netlink socket [ 1.399353] NET: Registered protocol family 10 [ 1.400027] NET: Registered protocol family 17 [ 1.400037] NET: Registered protocol family 15 [ 1.400110] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.400153] Bluetooth: RFCOMM socket layer initialized [ 1.400162] Bluetooth: RFCOMM ver 1.11 [ 1.400166] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.400170] Bluetooth: HIDP socket layer initialized [ 1.400186] 9pnet: Installing 9P2000 support [ 1.400219] Key type dns_resolver registered [ 1.400585] Registered cp15_barrier emulation handler [ 1.400591] Registered setend emulation handler [ 1.401619] registered taskstats version 1 [ 1.402168] Adding domain ve2-pd to PM domain host1x-pd [ 1.402451] Adding domain ve-pd to PM domain host1x-pd [ 1.406443] isp 54600000.isp: initialized [ 1.407431] isp 54680000.isp: initialized [ 1.409898] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.409998] Extcon AUX1(HDMI) enable [ 1.421606] last reset is due to power on reset [ 1.421609] KERNEL: PMC reset status reg: 0x0 [ 1.421666] BL: PMC reset status reg: 0x0 [ 1.421667] BL: PMIC poweroff Event Recorder: 0x40 [ 1.422243] vdd-usb-vbus-en: 5000 mV [ 1.422573] vdd-usb-vbus-en: supplied by vdd-5v0-sys [ 1.423530] clk_cbus_recalc_rate: no gbus parent [ 1.423534] clk_cbus_round_rate: no gbus parent [ 1.423535] clk_cbus_round_rate: no gbus parent [ 1.423542] clk_cbus_recalc_rate: no gbus parent [ 1.423636] clk_cbus_recalc_rate: no gbus parent [ 1.423639] clk_cbus_round_rate: no gbus parent [ 1.423640] clk_cbus_round_rate: no gbus parent [ 1.423644] clk_cbus_recalc_rate: no gbus parent [ 1.424344] tegra_dvfs: GPU-cap: registered [ 1.424397] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.424399] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 1.424401] tegra dvfs: vdd-gpu: nominal 1048mV, offset 708000uV, step 10000uV, scaling enabled [ 1.425422] tegradc tegradc.0: sync windows ret = 247 [ 1.425801] tegra_dvfs: vdd-gpu-vts: registered [ 1.425989] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x8a07c11 [ 1.425994] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.426716] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.426778] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.426836] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.426945] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.426998] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.427058] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.427115] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.427167] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.427218] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.427273] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.428599] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.430667] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.430782] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.431175] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.431941] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.432189] tegra-xusb 70090000.xusb: extcon 0: ffffffc078072800 id [ 1.433567] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.434437] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.434444] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.434836] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.434947] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.435322] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.435338] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.436016] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.436044] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release [ 1.436070] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.436083] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.436516] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.436872] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.436896] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.437164] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.437168] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.437170] usb usb1: Product: xHCI Host Controller [ 1.437173] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.437175] usb usb1: SerialNumber: 70090000.xusb [ 1.437470] hub 1-0:1.0: USB hub found [ 1.437493] hub 1-0:1.0: 5 ports detected [ 1.437818] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.437825] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.437871] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.437944] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.437947] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.437949] usb usb2: Product: xHCI Host Controller [ 1.437952] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.437954] usb usb2: SerialNumber: 70090000.xusb [ 1.438213] hub 2-0:1.0: USB hub found [ 1.438233] hub 2-0:1.0: 4 ports detected [ 1.438723] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.438727] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.467538] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.467541] Extcon HDMI: HPD enabled [ 1.467559] tegradc tegradc.0: hdmi: plugged [ 1.467867] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:11 UTC (946688411) [ 1.468823] vi 54080000.vi: vi_probe: ++ [ 1.471456] vi 54080000.vi: initialized [ 1.473444] vi 54080000.vi: subdev nvcsi--1 bound [ 1.474249] Disable partitions left on by BL [ 1.474252] disb [ 1.474300] bwmgr: missing cdev-type property [ 1.474386] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.474392] DRAM derating cdev registered. [ 1.475464] ALSA device list: [ 1.475467] #0: tegra-hda at 0x70038000 irq 81 [ 1.475470] #1: tegra-snd-t210ref-mobile-rt565x [ 1.478682] Freeing unused kernel memory: 8640K [ 1.502605] Root device found: mmcblk0p1 [ 1.538039] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 1.542171] usb usb2: usb_suspend_both: status 0 [ 1.577098] mmc0: hw tuning done ... [ 1.577133] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 1.577485] mmcblk0: mmc0:aaaa SC64G 59.5 GiB [ 1.583002] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 1.707567] Found dev node: /dev/mmcblk0p1 [ 1.761939] usb 1-3: new high-speed USB device number 2 using tegra-xusb [ 1.782535] usb 1-3: New USB device found, idVendor=1a40, idProduct=0801 [ 1.782540] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.782543] usb 1-3: Product: USB 2.0 Hub [ 1.783325] hub 1-3:1.0: USB hub found [ 1.783391] hub 1-3:1.0: 4 ports detected [ 1.862609] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.065932] tegra_cec 70015000.tegra_cec: physical address: 10:00. [ 2.089946] usb 1-3.1: new low-speed USB device number 3 using tegra-xusb [ 2.114133] usb 1-3.1: New USB device found, idVendor=18f8, idProduct=1286 [ 2.114138] usb 1-3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.114141] usb 1-3.1: Product: USB GAMING MOUSE [ 2.117370] input: USB GAMING MOUSE as /devices/70090000.xusb/usb1/1-3/1-3.1/1-3.1:1.0/0003:18F8:1286.0001/input/input2 [ 2.117648] hid-generic 0003:18F8:1286.0001: input,hidraw0: USB HID v1.10 Mouse [USB GAMING MOUSE ] on usb-70090000.xusb-3.1/input0 [ 2.122226] input: USB GAMING MOUSE as /devices/70090000.xusb/usb1/1-3/1-3.1/1-3.1:1.1/0003:18F8:1286.0002/input/input3 [ 2.182187] hid-generic 0003:18F8:1286.0002: input,hidraw1: USB HID v1.10 Keyboard [USB GAMING MOUSE ] on usb-70090000.xusb-3.1/input1 [ 2.271926] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.278263] EXT4-fs (mmcblk0p1): 14 orphan inodes deleted [ 2.278266] EXT4-fs (mmcblk0p1): recovery complete [ 2.316835] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.318734] Rootfs mounted over mmcblk0p1 [ 2.346631] Switching from initrd to actual rootfs [ 2.532790] systemd[1]: System time before build time, advancing clock. [ 2.552568] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.564594] cgroup: cgroup2: unknown option "nsdelegate" [ 2.593136] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.593880] systemd[1]: Detected architecture arm64. [ 2.618040] systemd[1]: Set hostname to . [ 2.680066] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.681981] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.725800] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.725810] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.787459] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.787464] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.787468] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.787472] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.787476] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.787498] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.787559] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.787705] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.787807] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.787830] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.787860] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.787879] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.788012] pci 0000:01:00.0: supports D1 D2 [ 2.788015] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.798037] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.798064] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 2.798068] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.798073] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit] [ 2.798090] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit] [ 2.798105] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.798113] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.798116] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.798121] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] [ 2.798378] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.798382] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.798387] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.798471] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.798646] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.798663] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.812682] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.812747] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 48:b0:2d:2d:e8:57 from device tree [ 2.813195] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.813210] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.861797] random: systemd: uninitialized urandom read (16 bytes read) [ 2.863498] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.863600] random: systemd: uninitialized urandom read (16 bytes read) [ 2.863715] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.863758] random: systemd: uninitialized urandom read (16 bytes read) [ 2.865266] systemd[1]: Created slice User and Session Slice. [ 2.865332] systemd[1]: Reached target User and Group Name Lookups. [ 2.866164] systemd[1]: Created slice System Slice. [ 2.942639] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.055338] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 3.224605] systemd-journald[2001]: Received request to flush runtime journal from PID 1 [ 3.363126] Adding 4194300k swap on /swapfile. Priority:-1 extents:6 across:4521980k SS [ 3.736733] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 3.997989] usb 1-2: new full-speed USB device number 4 using tegra-xusb [ 4.019657] usb 1-2: New USB device found, idVendor=10c4, idProduct=ea60 [ 4.019663] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.019667] usb 1-2: Product: CP2102 USB to UART Bridge Controller [ 4.019671] usb 1-2: Manufacturer: Silicon Labs [ 4.019674] usb 1-2: SerialNumber: 0001 [ 4.209950] tegra_cec 70015000.tegra_cec: timeout in tegra_cec_native_write_l:172. [ 4.217669] tegra_cec 70015000.tegra_cec: Sent res: -62. [ 4.224369] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 4.290709] random: crng init done [ 4.294140] random: 7 urandom warning(s) missed due to ratelimiting [ 4.306294] using random self ethernet address [ 4.310797] using random host ethernet address [ 4.446121] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.446144] cpu-throttle-alert cooling device registered. [ 4.446341] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.446359] gpu-throttle-alert cooling device registered. [ 4.446568] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.446582] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.446596] hot-surface-alert cooling device registered. [ 4.701989] usb 1-3.2: new low-speed USB device number 5 using tegra-xusb [ 4.728152] usb 1-3.2: New USB device found, idVendor=1a2c, idProduct=4d7e [ 4.728159] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.728172] usb 1-3.2: Product: USB Keyboard [ 4.728175] usb 1-3.2: Manufacturer: SEMICO [ 4.732628] input: SEMICO USB Keyboard as /devices/70090000.xusb/usb1/1-3/1-3.2/1-3.2:1.0/0003:1A2C:4D7E.0003/input/input4 [ 4.790801] hid-generic 0003:1A2C:4D7E.0003: input,hidraw2: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-70090000.xusb-3.2/input0 [ 4.814135] input: SEMICO USB Keyboard as /devices/70090000.xusb/usb1/1-3/1-3.2/1-3.2:1.1/0003:1A2C:4D7E.0004/input/input5 [ 4.874312] hid-generic 0003:1A2C:4D7E.0004: input,hidraw3: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-70090000.xusb-3.2/input1 [ 5.461120] Mass Storage Function, version: 2009/09/11 [ 5.461126] LUN: removable file: (no medium) [ 5.466481] using random self ethernet address [ 5.470992] using random host ethernet address [ 5.734158] rndis0: HOST MAC f2:40:02:07:da:88 [ 5.735338] rndis0: MAC f2:40:02:07:da:89 [ 5.741013] usb0: HOST MAC f2:40:02:07:da:8a [ 5.741045] usb0: MAC f2:40:02:07:da:8b [ 5.741064] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 5.742215] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 5.742232] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 5.744074] tegra-xudc-new 700d0000.xudc: entering ELPG [ 5.744315] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 5.744335] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 5.744849] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 5.744860] tegra-xudc-new 700d0000.xudc: entering ELPG [ 5.745073] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 5.750591] l4tbr0: port 1(rndis0) entered blocking state [ 5.750596] l4tbr0: port 1(rndis0) entered disabled state [ 5.752510] device rndis0 entered promiscuous mode [ 5.760129] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 5.765388] l4tbr0: port 2(usb0) entered blocking state [ 5.765393] l4tbr0: port 2(usb0) entered disabled state [ 5.787220] device usb0 entered promiscuous mode [ 5.794766] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 5.865425] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.892000] eth0: 0xffffff800acac000, 48:b0:2d:2d:e8:57, IRQ 405 [ 5.954104] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.963247] nvgpu: 57000000.gpu gk20a_pmu_isr:724 [ERR] pmu exterr intr not implemented. Clearing interrupt. [ 5.975096] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:560 [ERR] <<< FALCON id-0 DEBUG INFORMATION - START >>> [ 5.986321] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:504 [ERR] FALCON IMEM BLK MAPPING (PA->VA) (96 TOTAL): [ 5.997524] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:518 [ERR] 0x00: 0x01000000 0x01000100 0x01000200 0x01000300 [ 6.009179] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:520 [ERR] 0x04: 0x01000400 0x01000500 0x01000600 0x01000700 [ 6.020823] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:518 [ERR] 0x08: 0x01000800 0x01000900 0x01000a00 0x01000b00 [ 6.032449] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:520 [ERR] 0x0c: 0x01000c00 0x01000d00 0x01000e00 0x01000f00 [ 6.044091] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:518 [ERR] 0x10: 0x01001000 0x01001100 0x01001200 0x01001300 [ 6.055716] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:520 [ERR] 0x14: 0x01001400 0x01001500 0x01001600 0x01002d00 [ 6.067354] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:518 [ERR] 0x18: 0x01002e00 0x01002f00 0x01003000 0x01003100 [ 6.078983] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:520 [ERR] 0x1c: 0x01001c00 0x01001d00 0x01001e00 0x01001f00 [ 6.090620] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:518 [ERR] 0x20: 0x01002000 0x01002100 0x01002200 0x01004b00 [ 6.102245] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:520 [ERR] 0x24: 0x01004c00 0x01004d00 0x01004e00 0x01004f00 [ 6.113884] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:518 [ERR] 0x28: 0x01005000 0x01005100 0x01002300 0x01002400 [ 6.125514] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:520 [ERR] 0x2c: 0x01002500 0x01003200 0x01003300 0x01003400 [ 6.137170] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:518 [ERR] 0x30: 0x01003500 0x01003600 0x01003700 0x01003800 [ 6.137173] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:520 [ERR] 0x34: 0x01003900 0x01003a00 0x01003b00 0x01003c00 [ 6.137188] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:518 [ERR] 0x38: 0x01003d00 0x01003e00 0x01003f00 0x01004000 [ 6.137191] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:520 [ERR] 0x3c: 0x01004100 0x01004200 0x01004300 0x01004400 [ 6.137206] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:518 [ERR] 0x40: 0x01004500 0x01004600 0x01004700 0x01004800 [ 6.137208] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:520 [ERR] 0x44: 0x01004900 0x01004a00 0x01005200 0x01005300 [ 6.137224] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:518 [ERR] 0x48: 0x01005400 0x01005500 0x01005600 0x01005700 [ 6.137226] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:520 [ERR] 0x4c: 0x01005800 0x01005900 0x01005a00 0x01005b00 [ 6.137241] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:518 [ERR] 0x50: 0x01005c00 0x01005d00 0x01005e00 0x01005f00 [ 6.137244] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:520 [ERR] 0x54: 0x01006000 0x01006100 0x01006200 0x01006300 [ 6.137259] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:518 [ERR] 0x58: 0x01006400 0x01006500 0x01006600 0x01002600 [ 6.137261] nvgpu: 57000000.gpu gk20a_falcon_dump_imblk:520 [ERR] 0x5c: 0x01002700 0x01002800 0x01002900 0x01002c00 [ 6.137267] nvgpu: 57000000.gpu gk20a_falcon_dump_pc_trace:541 [ERR] PC TRACE (TOTAL 7 ENTRIES. entry 0 is the most recent branch): [ 6.137271] nvgpu: 57000000.gpu gk20a_falcon_dump_pc_trace:549 [ERR] FALCON_TRACEPC(0) : 0x0000054a [ 6.137276] nvgpu: 57000000.gpu gk20a_falcon_dump_pc_trace:549 [ERR] FALCON_TRACEPC(1) : 0x00000545 [ 6.137280] nvgpu: 57000000.gpu gk20a_falcon_dump_pc_trace:549 [ERR] FALCON_TRACEPC(2) : 0x0000054e [ 6.137284] nvgpu: 57000000.gpu gk20a_falcon_dump_pc_trace:549 [ERR] FALCON_TRACEPC(3) : 0x00001041 [ 6.137287] nvgpu: 57000000.gpu gk20a_falcon_dump_pc_trace:549 [ERR] FALCON_TRACEPC(4) : 0x000015e2 [ 6.137291] nvgpu: 57000000.gpu gk20a_falcon_dump_pc_trace:549 [ERR] FALCON_TRACEPC(5) : 0x0000160e [ 6.137295] nvgpu: 57000000.gpu gk20a_falcon_dump_pc_trace:549 [ERR] FALCON_TRACEPC(6) : 0x00000a59 [ 6.137297] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:567 [ERR] FALCON ICD REGISTERS DUMP [ 6.137301] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:575 [ERR] FALCON_REG_PC : 0x1041 [ 6.137305] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:582 [ERR] FALCON_REG_SP : 0x43c4 [ 6.137309] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:575 [ERR] FALCON_REG_PC : 0x1041 [ 6.137312] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:582 [ERR] FALCON_REG_SP : 0x43c4 [ 6.137316] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:575 [ERR] FALCON_REG_PC : 0x1041 [ 6.137319] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:582 [ERR] FALCON_REG_SP : 0x43c4 [ 6.137323] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:575 [ERR] FALCON_REG_PC : 0x1041 [ 6.137326] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:582 [ERR] FALCON_REG_SP : 0x43c4 [ 6.137330] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:589 [ERR] FALCON_REG_IMB : 0xff9071 [ 6.137334] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:595 [ERR] FALCON_REG_DMB : 0xff90d8 [ 6.137337] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:601 [ERR] FALCON_REG_CSW : 0x330801 [ 6.137341] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:607 [ERR] FALCON_REG_CTX : 0x0 [ 6.137344] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:613 [ERR] FALCON_REG_EXCI : 0x693 [ 6.137348] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:622 [ERR] FALCON_REG_RSTAT[0] : 0xa5a5a5a5 [ 6.137352] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:622 [ERR] FALCON_REG_RSTAT[1] : 0xa5a5a5a5 [ 6.137358] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:622 [ERR] FALCON_REG_RSTAT[2] : 0xa5a5a5a5 [ 6.137362] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:622 [ERR] FALCON_REG_RSTAT[3] : 0xd84 [ 6.137366] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:622 [ERR] FALCON_REG_RSTAT[4] : 0xa5a5a5a5 [ 6.137370] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:622 [ERR] FALCON_REG_RSTAT[5] : 0xa5a5a5a5 [ 6.137372] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:625 [ERR] FALCON REGISTERS DUMP [ 6.137375] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:627 [ERR] falcon_falcon_os_r : 0 [ 6.137378] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:629 [ERR] falcon_falcon_cpuctl_r : 0x60 [ 6.137382] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:631 [ERR] falcon_falcon_idlestate_r : 0x0 [ 6.137385] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:633 [ERR] falcon_falcon_mailbox0_r : 0x0 [ 6.137389] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:635 [ERR] falcon_falcon_mailbox1_r : 0x0 [ 6.137393] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:637 [ERR] falcon_falcon_irqstat_r : 0x61 [ 6.137396] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:639 [ERR] falcon_falcon_irqmode_r : 0xfc24 [ 6.137400] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:641 [ERR] falcon_falcon_irqmask_r : 0x7879 [ 6.137403] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:643 [ERR] falcon_falcon_irqdest_r : 0x90372 [ 6.137406] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:645 [ERR] falcon_falcon_debug1_r : 0x10000 [ 6.137410] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:647 [ERR] falcon_falcon_debuginfo_r : 0x0 [ 6.137413] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:649 [ERR] falcon_falcon_bootvec_r : 0x3200 [ 6.137417] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:651 [ERR] falcon_falcon_hwcfg_r : 0x400cc060 [ 6.137420] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:653 [ERR] falcon_falcon_engctl_r : 0x0 [ 6.137424] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:655 [ERR] falcon_falcon_curctx_r : 0x707fffe7 [ 6.137427] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:657 [ERR] falcon_falcon_nxtctx_r : 0x707fffe7 [ 6.137430] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:659 [ERR] falcon_falcon_exterrstat_r : 0x85002efb [ 6.137434] nvgpu: 57000000.gpu gk20a_falcon_dump_stats:661 [ERR] falcon_falcon_exterraddr_r : 0x18405814 [ 6.137439] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:630 [ERR] pwr_pmu_mailbox_r(0) : 0x0 [ 6.137443] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:630 [ERR] pwr_pmu_mailbox_r(1) : 0x0 [ 6.137446] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:630 [ERR] pwr_pmu_mailbox_r(2) : 0x0 [ 6.137450] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:630 [ERR] pwr_pmu_mailbox_r(3) : 0x0 [ 6.137453] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:630 [ERR] pwr_pmu_mailbox_r(4) : 0x0 [ 6.137456] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:630 [ERR] pwr_pmu_mailbox_r(5) : 0x0 [ 6.137460] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:630 [ERR] pwr_pmu_mailbox_r(6) : 0x0 [ 6.137463] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:630 [ERR] pwr_pmu_mailbox_r(7) : 0x0 [ 6.137466] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:630 [ERR] pwr_pmu_mailbox_r(8) : 0x0 [ 6.137470] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:630 [ERR] pwr_pmu_mailbox_r(9) : 0x0 [ 6.137473] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:630 [ERR] pwr_pmu_mailbox_r(10) : 0x0 [ 6.137477] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:630 [ERR] pwr_pmu_mailbox_r(11) : 0x0 [ 6.137480] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:635 [ERR] pwr_pmu_debug_r(0) : 0x0 [ 6.137483] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:635 [ERR] pwr_pmu_debug_r(1) : 0x0 [ 6.137487] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:635 [ERR] pwr_pmu_debug_r(2) : 0x2b [ 6.137490] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:635 [ERR] pwr_pmu_debug_r(3) : 0x0 [ 6.137493] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:639 [ERR] pwr_pmu_bar0_error_status_r : 0x0 [ 6.137497] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:652 [ERR] pwr_pmu_bar0_fecs_error_r : 0xbadf1201 [ 6.137500] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:655 [ERR] pwr_falcon_exterrstat_r : 0x85002efb [ 6.137504] nvgpu: 57000000.gpu gk20a_pmu_dump_falcon_stats:659 [ERR] pwr_falcon_exterraddr_r : 0x18405814 [ 6.137536] nvgpu: 57000000.gpu print_pmu_trace:88 [ERR] dump PMU trace buffer [ 6.137541] nvgpu: 57000000.gpu nvgpu_pmu_dump_falcon_stats:51 [ERR] pmu state: 7 [ 6.137543] nvgpu: 57000000.gpu nvgpu_pmu_dump_falcon_stats:52 [ERR] elpg state: 0 [ 6.137548] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:129 [ERR] gr_fecs_os_r : 0 [ 6.137551] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:131 [ERR] gr_fecs_cpuctl_r : 0x60 [ 6.137554] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:133 [ERR] gr_fecs_idlestate_r : 0x0 [ 6.137558] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:135 [ERR] gr_fecs_mailbox0_r : 0x0 [ 6.137561] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:137 [ERR] gr_fecs_mailbox1_r : 0x0 [ 6.137564] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:139 [ERR] gr_fecs_irqstat_r : 0x0 [ 6.137567] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:141 [ERR] gr_fecs_irqmode_r : 0x4 [ 6.137570] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:143 [ERR] gr_fecs_irqmask_r : 0x8704 [ 6.137574] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:145 [ERR] gr_fecs_irqdest_r : 0x0 [ 6.137577] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:147 [ERR] gr_fecs_debug1_r : 0x40 [ 6.137580] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:149 [ERR] gr_fecs_debuginfo_r : 0x0 [ 6.137583] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:151 [ERR] gr_fecs_ctxsw_status_1_r : 0x382 [ 6.137587] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:155 [ERR] gr_fecs_ctxsw_mailbox_r(0) : 0x1 [ 6.137590] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:155 [ERR] gr_fecs_ctxsw_mailbox_r(1) : 0x0 [ 6.137593] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:155 [ERR] gr_fecs_ctxsw_mailbox_r(2) : 0x1 [ 6.137596] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:155 [ERR] gr_fecs_ctxsw_mailbox_r(3) : 0x0 [ 6.137599] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:155 [ERR] gr_fecs_ctxsw_mailbox_r(4) : 0x1ffda0 [ 6.137602] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:155 [ERR] gr_fecs_ctxsw_mailbox_r(5) : 0x0 [ 6.137605] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:155 [ERR] gr_fecs_ctxsw_mailbox_r(6) : 0x0 [ 6.137608] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:155 [ERR] gr_fecs_ctxsw_mailbox_r(7) : 0x0 [ 6.137611] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:155 [ERR] gr_fecs_ctxsw_mailbox_r(8) : 0x0 [ 6.137614] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:155 [ERR] gr_fecs_ctxsw_mailbox_r(9) : 0x0 [ 6.137618] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:155 [ERR] gr_fecs_ctxsw_mailbox_r(10) : 0x0 [ 6.137621] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:155 [ERR] gr_fecs_ctxsw_mailbox_r(11) : 0x0 [ 6.137624] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:155 [ERR] gr_fecs_ctxsw_mailbox_r(12) : 0x0 [ 6.137627] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:155 [ERR] gr_fecs_ctxsw_mailbox_r(13) : 0x0 [ 6.137630] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:155 [ERR] gr_fecs_ctxsw_mailbox_r(14) : 0x0 [ 6.137633] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:155 [ERR] gr_fecs_ctxsw_mailbox_r(15) : 0x0 [ 6.137636] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:159 [ERR] gr_fecs_engctl_r : 0x0 [ 6.137640] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:161 [ERR] gr_fecs_curctx_r : 0x0 [ 6.137643] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:163 [ERR] gr_fecs_nxtctx_r : 0x0 [ 6.137646] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:169 [ERR] FECS_FALCON_REG_IMB : 0xbadfbadf [ 6.137650] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:175 [ERR] FECS_FALCON_REG_DMB : 0xbadfbadf [ 6.137654] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:181 [ERR] FECS_FALCON_REG_CSW : 0xbadfbadf [ 6.137658] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:187 [ERR] FECS_FALCON_REG_CTX : 0xbadfbadf [ 6.137662] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:193 [ERR] FECS_FALCON_REG_EXCI : 0xbadfbadf [ 6.137665] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:200 [ERR] FECS_FALCON_REG_PC : 0xbadfbadf [ 6.137669] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:206 [ERR] FECS_FALCON_REG_SP : 0xbadfbadf [ 6.137673] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:200 [ERR] FECS_FALCON_REG_PC : 0xbadfbadf [ 6.137676] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:206 [ERR] FECS_FALCON_REG_SP : 0xbadfbadf [ 6.137680] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:200 [ERR] FECS_FALCON_REG_PC : 0xbadfbadf [ 6.137683] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:206 [ERR] FECS_FALCON_REG_SP : 0xbadfbadf [ 6.137687] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:200 [ERR] FECS_FALCON_REG_PC : 0xbadfbadf [ 6.137691] nvgpu: 57000000.gpu gk20a_fecs_dump_falcon_stats:206 [ERR] FECS_FALCON_REG_SP : 0xbadfbadf [ 6.137760] nvgpu: 57000000.gpu gk20a_ptimer_isr:50 [ERR] PRI timeout: ADR 0x00122124 READ DATA 0x00000000 [ 6.137763] nvgpu: 57000000.gpu gk20a_ptimer_isr:56 [ERR] FECS_ERRCODE 0xbadf5202 [ 6.362296] usbcore: registered new interface driver cp210x [ 6.362338] usbserial: USB Serial support registered for cp210x [ 6.362409] cp210x 1-2:1.0: cp210x converter detected [ 6.364613] usb 1-2: cp210x converter now attached to ttyUSB0 [ 7.709893] zram: Added device: zram0 [ 7.710489] zram: Added device: zram1 [ 7.710834] zram: Added device: zram2 [ 7.711283] zram: Added device: zram3 [ 7.741850] zram0: detected capacity change from 0 to 258465792 [ 7.886477] Adding 252404k swap on /dev/zram0. Priority:5 extents:1 across:252404k SS [ 7.892147] zram1: detected capacity change from 0 to 258465792 [ 7.902921] Adding 252404k swap on /dev/zram1. Priority:5 extents:1 across:252404k SS [ 7.905776] zram2: detected capacity change from 0 to 258465792 [ 7.916487] Adding 252404k swap on /dev/zram2. Priority:5 extents:1 across:252404k SS [ 7.919567] zram3: detected capacity change from 0 to 258465792 [ 7.930225] Adding 252404k swap on /dev/zram3. Priority:5 extents:1 across:252404k SS [ 8.980114] Bridge firewalling registered [ 9.084352] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 9.693564] tegradc tegradc.0: unblank [ 9.831504] Netfilter messages via NETLINK v0.30. [ 9.835548] ctnetlink v0.93: registering with nfnetlink. [ 10.024364] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 10.033937] r8168: eth0: link up [ 10.033978] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.205702] fuse init (API version 7.26) [ 31.860548] vdd-fan: disabling [ 31.860592] vdd-usb-vbus: disabling [ 31.860623] vdd-usb-vbus2: disabling [ 31.860720] vddio-sdmmc3-ap: disabling [ 31.861084] avdd-io-edp-1v05: disabling [ 31.861116] vdd-usb-hub-en: disabling [ 42.868856] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 42.868867] Bluetooth: BNEP socket layer initialized [ 108.111823] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 108.111849] usb 1-2: USB disconnect, device number 4 [ 108.112155] cp210x ttyUSB0: failed set request 0x7 status: -19 [ 108.118057] cp210x ttyUSB0: failed set request 0x12 status: -19 [ 108.124045] cp210x ttyUSB0: failed set request 0x0 status: -19 [ 108.130244] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 108.130268] cp210x 1-2:1.0: device disconnected [ 108.138390] usb 1-3.2: USB disconnect, device number 5 [ 110.039025] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 110.300808] usb 1-2: new full-speed USB device number 6 using tegra-xusb [ 110.322727] usb 1-2: New USB device found, idVendor=10c4, idProduct=ea60 [ 110.322733] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 110.322737] usb 1-2: Product: CP2102 USB to UART Bridge Controller [ 110.322739] usb 1-2: Manufacturer: Silicon Labs [ 110.322743] usb 1-2: SerialNumber: 0001 [ 110.324051] cp210x 1-2:1.0: cp210x converter detected [ 110.324691] usb 1-2: cp210x converter now attached to ttyUSB1 [ 110.684808] usb 1-3.2: new low-speed USB device number 7 using tegra-xusb [ 110.711062] usb 1-3.2: New USB device found, idVendor=1a2c, idProduct=4d7e [ 110.711068] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 110.711071] usb 1-3.2: Product: USB Keyboard [ 110.711074] usb 1-3.2: Manufacturer: SEMICO [ 110.715382] input: SEMICO USB Keyboard as /devices/70090000.xusb/usb1/1-3/1-3.2/1-3.2:1.0/0003:1A2C:4D7E.0005/input/input6 [ 110.773466] hid-generic 0003:1A2C:4D7E.0005: input,hidraw2: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-70090000.xusb-3.2/input0 [ 110.779806] input: SEMICO USB Keyboard as /devices/70090000.xusb/usb1/1-3/1-3.2/1-3.2:1.1/0003:1A2C:4D7E.0006/input/input7 [ 110.837150] hid-generic 0003:1A2C:4D7E.0006: input,hidraw3: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-70090000.xusb-3.2/input1 [ 145.771505] usb 1-3.2: USB disconnect, device number 7 [ 146.795236] usb 1-3.1: USB disconnect, device number 3 [ 147.088590] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 2 [ 147.109022] usb 1-3: usb_suspend_both: status 0 [ 147.855671] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 147.855986] usb 1-2: USB disconnect, device number 6 [ 147.860113] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1 [ 147.861041] cp210x 1-2:1.0: device disconnected [ 148.009273] usb usb1: usb_suspend_both: status 0 [ 148.009378] tegra-xusb 70090000.xusb: entering ELPG [ 148.010740] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 0 [ 148.011326] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 3 [ 148.014970] tegra-xusb 70090000.xusb: entering ELPG done [ 149.034406] tegra-xusb 70090000.xusb: exiting ELPG [ 149.036568] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 149.040570] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release [ 149.041120] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 0 [ 149.041189] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 1 [ 149.041255] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 2 [ 149.041756] tegra-xusb 70090000.xusb: exiting ELPG done [ 149.328398] usb 1-3.1: new full-speed USB device number 8 using tegra-xusb [ 149.353851] usb 1-3.1: New USB device found, idVendor=10c4, idProduct=ea60 [ 149.353923] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 149.353976] usb 1-3.1: Product: CP2102 USB to UART Bridge Controller [ 149.354020] usb 1-3.1: Manufacturer: Silicon Labs [ 149.354062] usb 1-3.1: SerialNumber: 0001 [ 149.361091] cp210x 1-3.1:1.0: cp210x converter detected [ 149.362210] usb 1-3.1: cp210x converter now attached to ttyUSB0 [ 153.032487] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 153.296608] usb 1-2: new low-speed USB device number 9 using tegra-xusb [ 153.326446] usb 1-2: New USB device found, idVendor=1a2c, idProduct=4d7e [ 153.326494] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 153.326530] usb 1-2: Product: USB Keyboard [ 153.326563] usb 1-2: Manufacturer: SEMICO [ 153.335637] input: SEMICO USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2:1.0/0003:1A2C:4D7E.0007/input/input8 [ 153.395191] hid-generic 0003:1A2C:4D7E.0007: input,hidraw0: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-70090000.xusb-2/input0 [ 153.403460] input: SEMICO USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2:1.1/0003:1A2C:4D7E.0008/input/input9 [ 153.462267] hid-generic 0003:1A2C:4D7E.0008: input,hidraw1: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-70090000.xusb-2/input1 [ 157.476684] usb 1-3.2: new low-speed USB device number 10 using tegra-xusb [ 157.502397] usb 1-3.2: New USB device found, idVendor=18f8, idProduct=1286 [ 157.502457] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 157.502501] usb 1-3.2: Product: USB GAMING MOUSE [ 157.510649] input: USB GAMING MOUSE as /devices/70090000.xusb/usb1/1-3/1-3.2/1-3.2:1.0/0003:18F8:1286.0009/input/input10 [ 157.510956] hid-generic 0003:18F8:1286.0009: input,hidraw2: USB HID v1.10 Mouse [USB GAMING MOUSE ] on usb-70090000.xusb-3.2/input0 [ 157.515648] input: USB GAMING MOUSE as /devices/70090000.xusb/usb1/1-3/1-3.2/1-3.2:1.1/0003:18F8:1286.000A/input/input11 [ 157.574531] hid-generic 0003:18F8:1286.000A: input,hidraw3: USB HID v1.10 Keyboard [USB GAMING MOUSE ] on usb-70090000.xusb-3.2/input1 [ 162.579519] cp210x ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32 [ 162.587355] cp210x ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32 [ 162.595344] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 162.595365] usb 1-2: USB disconnect, device number 9 [ 162.609868] usb 1-3.1: USB disconnect, device number 8 [ 162.609986] cp210x ttyUSB0: failed set request 0x7 status: -19 [ 162.616039] cp210x ttyUSB0: failed set request 0x12 status: -19 [ 162.622007] cp210x ttyUSB0: failed set request 0x0 status: -19 [ 162.628114] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 162.628137] cp210x 1-3.1:1.0: device disconnected [ 164.404589] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 164.667858] usb 1-2: new low-speed USB device number 11 using tegra-xusb [ 164.669017] usb 1-2: Device not responding to setup address. [ 164.907140] usb 1-2: New USB device found, idVendor=1a2c, idProduct=4d7e [ 164.907146] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 164.907150] usb 1-2: Product: USB Keyboard [ 164.907153] usb 1-2: Manufacturer: SEMICO [ 164.913732] input: SEMICO USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2:1.0/0003:1A2C:4D7E.000B/input/input12 [ 164.972389] hid-generic 0003:1A2C:4D7E.000B: input,hidraw0: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-70090000.xusb-2/input0 [ 164.980132] input: SEMICO USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2:1.1/0003:1A2C:4D7E.000C/input/input13 [ 165.040182] hid-generic 0003:1A2C:4D7E.000C: input,hidraw1: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-70090000.xusb-2/input1 [ 165.155832] usb 1-3.1: new full-speed USB device number 12 using tegra-xusb [ 165.177576] usb 1-3.1: New USB device found, idVendor=10c4, idProduct=ea60 [ 165.177582] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 165.177586] usb 1-3.1: Product: CP2102 USB to UART Bridge Controller [ 165.177589] usb 1-3.1: Manufacturer: Silicon Labs [ 165.177592] usb 1-3.1: SerialNumber: 0001 [ 165.179970] cp210x 1-3.1:1.0: cp210x converter detected [ 165.181246] usb 1-3.1: cp210x converter now attached to ttyUSB1 [ 242.738048] usb 1-3.2: USB disconnect, device number 10 [ 243.250944] usb 1-3.1: USB disconnect, device number 12 [ 243.255812] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1 [ 243.255848] cp210x 1-3.1:1.0: device disconnected [ 243.423614] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 2 [ 243.443407] usb 1-3: usb_suspend_both: status 0 [ 244.211104] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 244.211148] usb 1-2: USB disconnect, device number 11 [ 244.516135] usb usb1: usb_suspend_both: status 0 [ 244.516239] tegra-xusb 70090000.xusb: entering ELPG [ 244.517594] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 0 [ 244.518173] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 3 [ 244.521923] tegra-xusb 70090000.xusb: entering ELPG done [ 247.486092] tegra-xusb 70090000.xusb: exiting ELPG [ 247.488170] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 247.492730] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release [ 247.493102] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 0 [ 247.493198] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 1 [ 247.493292] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 2 [ 247.493813] tegra-xusb 70090000.xusb: exiting ELPG done [ 247.719555] usb 1-2: new full-speed USB device number 13 using tegra-xusb [ 247.743357] usb 1-2: New USB device found, idVendor=10c4, idProduct=ea60 [ 247.743415] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 247.743459] usb 1-2: Product: CP2102 USB to UART Bridge Controller [ 247.743498] usb 1-2: Manufacturer: Silicon Labs [ 247.743539] usb 1-2: SerialNumber: 0001 [ 247.749822] cp210x 1-2:1.0: cp210x converter detected [ 247.750620] usb 1-2: cp210x converter now attached to ttyUSB0 [ 252.519666] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 252.747586] usb 1-3.1: new low-speed USB device number 14 using tegra-xusb [ 252.780950] usb 1-3.1: New USB device found, idVendor=1a2c, idProduct=4d7e [ 252.781013] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 252.781058] usb 1-3.1: Product: USB Keyboard [ 252.781102] usb 1-3.1: Manufacturer: SEMICO [ 252.794519] input: SEMICO USB Keyboard as /devices/70090000.xusb/usb1/1-3/1-3.1/1-3.1:1.0/0003:1A2C:4D7E.000D/input/input14 [ 252.854893] hid-generic 0003:1A2C:4D7E.000D: input,hidraw0: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-70090000.xusb-3.1/input0 [ 252.863207] input: SEMICO USB Keyboard as /devices/70090000.xusb/usb1/1-3/1-3.1/1-3.1:1.1/0003:1A2C:4D7E.000E/input/input15 [ 252.927164] hid-generic 0003:1A2C:4D7E.000E: input,hidraw1: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-70090000.xusb-3.1/input1 [ 257.827296] usb 1-3.2: new low-speed USB device number 15 using tegra-xusb [ 257.852642] usb 1-3.2: New USB device found, idVendor=18f8, idProduct=1286 [ 257.852770] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 257.852818] usb 1-3.2: Product: USB GAMING MOUSE [ 257.861020] input: USB GAMING MOUSE as /devices/70090000.xusb/usb1/1-3/1-3.2/1-3.2:1.0/0003:18F8:1286.000F/input/input16 [ 257.861513] hid-generic 0003:18F8:1286.000F: input,hidraw2: USB HID v1.10 Mouse [USB GAMING MOUSE ] on usb-70090000.xusb-3.2/input0 [ 257.866404] input: USB GAMING MOUSE as /devices/70090000.xusb/usb1/1-3/1-3.2/1-3.2:1.1/0003:18F8:1286.0010/input/input17 [ 257.924636] hid-generic 0003:18F8:1286.0010: input,hidraw3: USB HID v1.10 Keyboard [USB GAMING MOUSE ] on usb-70090000.xusb-3.2/input1 [ 263.224686] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 263.224709] usb 1-2: USB disconnect, device number 13 [ 263.225033] cp210x ttyUSB0: failed set request 0x7 status: -19 [ 263.232527] cp210x ttyUSB0: failed set request 0x12 status: -19 [ 263.239208] cp210x ttyUSB0: failed set request 0x0 status: -19 [ 263.246203] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 263.246237] cp210x 1-2:1.0: device disconnected [ 263.472763] usb 1-3.1: USB disconnect, device number 14 [ 265.209211] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 265.470670] usb 1-2: new full-speed USB device number 16 using tegra-xusb [ 265.492416] usb 1-2: New USB device found, idVendor=10c4, idProduct=ea60 [ 265.492421] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 265.492425] usb 1-2: Product: CP2102 USB to UART Bridge Controller [ 265.492428] usb 1-2: Manufacturer: Silicon Labs [ 265.492431] usb 1-2: SerialNumber: 0001 [ 265.494756] cp210x 1-2:1.0: cp210x converter detected [ 265.497998] usb 1-2: cp210x converter now attached to ttyUSB1 [ 265.762682] usb 1-3.1: new low-speed USB device number 17 using tegra-xusb [ 265.788787] usb 1-3.1: New USB device found, idVendor=1a2c, idProduct=4d7e [ 265.788793] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 265.788797] usb 1-3.1: Product: USB Keyboard [ 265.788800] usb 1-3.1: Manufacturer: SEMICO [ 265.793123] input: SEMICO USB Keyboard as /devices/70090000.xusb/usb1/1-3/1-3.1/1-3.1:1.0/0003:1A2C:4D7E.0011/input/input18 [ 265.851473] hid-generic 0003:1A2C:4D7E.0011: input,hidraw0: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-70090000.xusb-3.1/input0 [ 265.857865] input: SEMICO USB Keyboard as /devices/70090000.xusb/usb1/1-3/1-3.1/1-3.1:1.1/0003:1A2C:4D7E.0012/input/input19 [ 265.915086] hid-generic 0003:1A2C:4D7E.0012: input,hidraw1: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-70090000.xusb-3.1/input1 [ 1917.052436] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 1917.052654] usb 1-2: USB disconnect, device number 16 [ 1917.053979] cp210x ttyUSB1: failed set request 0x7 status: -19 [ 1917.060197] cp210x ttyUSB1: failed set request 0x12 status: -19 [ 1917.066442] cp210x ttyUSB1: failed set request 0x0 status: -19 [ 1917.073063] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1 [ 1917.073103] cp210x 1-2:1.0: device disconnected [ 1917.232924] usb 1-3.1: USB disconnect, device number 17 [ 1918.933445] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1919.201058] usb 1-2: new full-speed USB device number 18 using tegra-xusb [ 1919.222959] usb 1-2: New USB device found, idVendor=10c4, idProduct=ea60 [ 1919.222964] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1919.222968] usb 1-2: Product: CP2102 USB to UART Bridge Controller [ 1919.222971] usb 1-2: Manufacturer: Silicon Labs [ 1919.222974] usb 1-2: SerialNumber: 0001 [ 1919.224281] cp210x 1-2:1.0: cp210x converter detected [ 1919.224915] usb 1-2: cp210x converter now attached to ttyUSB0 [ 1919.525039] usb 1-3.1: new low-speed USB device number 19 using tegra-xusb [ 1919.551000] usb 1-3.1: New USB device found, idVendor=1a2c, idProduct=4d7e [ 1919.551006] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1919.551010] usb 1-3.1: Product: USB Keyboard [ 1919.551013] usb 1-3.1: Manufacturer: SEMICO [ 1919.555186] input: SEMICO USB Keyboard as /devices/70090000.xusb/usb1/1-3/1-3.1/1-3.1:1.0/0003:1A2C:4D7E.0013/input/input20 [ 1919.613721] hid-generic 0003:1A2C:4D7E.0013: input,hidraw0: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-70090000.xusb-3.1/input0 [ 1919.620065] input: SEMICO USB Keyboard as /devices/70090000.xusb/usb1/1-3/1-3.1/1-3.1:1.1/0003:1A2C:4D7E.0014/input/input21 [ 1919.677454] hid-generic 0003:1A2C:4D7E.0014: input,hidraw1: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-70090000.xusb-3.1/input1