[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-2713) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Dec 9 22:47:42 PST 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00800000@92cb0000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefb0000 s61592 r8192 d32616 u102400 [ 0.000000] pcpu-alloc: s61592 r8192 d32616 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 tegra_fbmem=0x800000@0x92cb0000 is_hdmi_initialised=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29396(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3562212K/4159488K available (15230K kernel code, 2926K rwdata, 6620K rodata, 8576K init, 609K bss, 122140K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f60000 ( 15232 KB) [ 0.000000] .rodata : 0xffffff8008f60000 - 0xffffff80095e0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095e0000 - 0xffffff8009e40000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e40000 - 0xffffff800a11b808 ( 2927 KB) [ 0.000000] .bss : 0xffffff800a11b808 - 0xffffff800a1b3dbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001783] Console: colour dummy device 80x25 [ 0.002643] console [tty0] enabled [ 0.002671] kmemleak: Kernel memory leak detector disabled [ 0.002703] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.002733] pid_max: default: 32768 minimum: 301 [ 0.003193] Security Framework initialized [ 0.003430] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003451] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.004722] ftrace: allocating 47001 entries in 184 pages [ 0.178148] sched-energy: CPU device node has no sched-energy-costs [ 0.178187] ASID allocator initialised with 65536 entries [ 0.216380] tegra-id: chipid=22117. [ 0.216424] tegra-id: opt_subrevision=0. [ 0.216454] Tegra Speedo/IDDQ fuse revision 4 [ 0.216469] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.216485] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.216502] Tegra: CPU Speedo Value 2001, SoC Speedo Value 1925, GPU Speedo Value 2017 [ 0.216523] Tegra: CPU IDDQ Value 1592, SoC IDDQ Value 2012, GPU IDDQ Value 2315 [ 0.216559] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.216586] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts [ 0.216619] DTB Build time: Dec 9 2019 22:51:54 [ 0.265091] CPU1: Booted secondary processor [411fd071] [ 0.297033] CPU2: Booted secondary processor [411fd071] [ 0.329005] CPU3: Booted secondary processor [411fd071] [ 0.329093] Brought up 4 CPUs [ 0.329156] SMP: Total of 4 processors activated. [ 0.329173] CPU features: detected feature: 32-bit EL0 Support [ 0.329454] CPU: All CPU(s) started at EL2 [ 0.329487] alternatives: patching kernel code [ 0.337902] devtmpfs: initialized [ 0.376289] Initilizing CustomIPI irq domain [ 0.376731] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.376781] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.388315] pinctrl core: initialized pinctrl subsystem [ 0.389040] OS set in device tree is not L4T. [ 0.389523] regulator-dummy: no parameters [ 0.389826] Initializing plugin-manager [ 0.389942] Plugin module not found [ 0.390187] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [ 0.390772] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [ 0.391674] node /plugin-manager/fragment@5 match with board 3449-0000-200 [ 0.392106] node /plugin-manager/fragement@6 match with odm-data enable-tegra-wdt [ 0.392557] node /plugin-manager/fragement@8 match with odm-data enable-tegra-wdt [ 0.392992] node /plugin-manager/fragement@9 match with board <3448-0000-300 [ 0.397978] NET: Registered protocol family 16 [ 0.402071] pstore: using zlib compression [ 0.402767] console [pstore-1] enabled [ 0.402785] pstore: Registered ramoops as persistent store backend [ 0.402803] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.417108] cpuidle: using governor menu [ 0.420672] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.422601] vdso: 2 pages (1 code @ ffffff8008f67000, 1 data @ ffffff8009e44000) [ 0.422647] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.425659] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.428478] tegra_powergate_init: DONE [ 0.428519] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts [ 0.428558] DTB Build time: Dec 9 2019 22:51:54 [ 0.430512] Tegra reboot handler registered. [ 0.435147] iommu: Adding device tegra-carveouts to group 0 [ 0.435327] platform tegra-carveouts: domain=ffffffc0f9b9b3d8 allocates as[0]=ffffffc0f94240a8 [ 0.435724] iommu: Adding device smmu_test to group 1 [ 0.435789] platform smmu_test: domain=ffffffc0f9b9b618 allocates as[0]=ffffffc0f9424110 [ 0.436635] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.436723] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.436790] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.436813] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.436852] mc-err: mcerr ops are set to t21x [ 0.444647] iommu: Adding device 70090000.xusb to group 2 [ 0.444974] iommu: Adding device 70006000.serial to group 3 [ 0.445112] platform 70006000.serial: domain=ffffffc0f9b69618 allocates as[0]=ffffffc0f9424178 [ 0.445592] iommu: Adding device 70006040.serial to group 4 [ 0.445893] iommu: Adding device 70006200.serial to group 5 [ 0.446142] iommu: Adding device sound to group 6 [ 0.446210] platform sound: domain=ffffffc0f9b69b58 allocates as[0]=ffffffc0f94241e0 [ 0.446805] iommu: Adding device 7000d400.spi to group 7 [ 0.447086] iommu: Adding device 7000d600.spi to group 8 [ 0.447388] iommu: Adding device 70410000.spi to group 9 [ 0.447708] iommu: Adding device 50000000.host1x to group 10 [ 0.447998] iommu: Adding device 54080000.vi to group 11 [ 0.448414] iommu: Adding device 54600000.isp to group 12 [ 0.448708] iommu: Adding device 54680000.isp to group 13 [ 0.449054] iommu: Adding device tegradc.0 to group 14 [ 0.449129] platform tegradc.0: domain=ffffffc0f94d9a98 allocates as[0]=ffffffc0f9424248 [ 0.453351] platform tegradc.0: IOVA linear map 0x0000000092cb0000(800000) [ 0.453758] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.454113] iommu: Adding device tegradc.1 to group 15 [ 0.454178] platform tegradc.1: domain=ffffffc0f94d9cd8 allocates as[0]=ffffffc0f94242b0 [ 0.458368] platform tegradc.1: IOVA linear map 0x0000000092cb0000(800000) [ 0.458775] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.459052] iommu: Adding device 54340000.vic to group 16 [ 0.459287] iommu: Adding device 544c0000.nvenc to group 17 [ 0.459519] iommu: Adding device 54500000.tsec to group 18 [ 0.459734] iommu: Adding device 54100000.tsecb to group 19 [ 0.459949] iommu: Adding device 54480000.nvdec to group 20 [ 0.460191] iommu: Adding device 54380000.nvjpg to group 21 [ 0.461298] iommu: Adding device 546c0000.i2c to group 22 [ 0.461648] iommu: Adding device 57000000.gpu to group 23 [ 0.461716] platform 57000000.gpu: domain=ffffffc0f94e8cd8 allocates as[0]=ffffffc0f9424318 [ 0.461775] platform 57000000.gpu: domain=ffffffc0f94e8cd8 allocates as[1]=ffffffc0f9424380 [ 0.461837] platform 57000000.gpu: domain=ffffffc0f94e8cd8 allocates as[2]=ffffffc0f94243e8 [ 0.461894] platform 57000000.gpu: domain=ffffffc0f94e8cd8 allocates as[3]=ffffffc0f9424450 [ 0.462817] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.462858] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.462886] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.462907] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.462925] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.513204] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.513241] tegra-pmc: Clear bootloader IO dpd settings [ 0.513274] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.513359] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.513681] iommu: Adding device 70012000.se to group 24 [ 0.514476] iommu: Adding device 7000c000.i2c to group 25 [ 0.514742] iommu: Adding device 7000c400.i2c to group 26 [ 0.515026] iommu: Adding device 7000c500.i2c to group 27 [ 0.515292] iommu: Adding device 7000c700.i2c to group 28 [ 0.515595] iommu: Adding device 7000d000.i2c to group 29 [ 0.515859] iommu: Adding device 7000d100.i2c to group 30 [ 0.516173] iommu: Adding device sdhci-tegra.0 to group 31 [ 0.516243] platform sdhci-tegra.0: domain=ffffffc0f957ce58 allocates as[0]=ffffffc0f94244b8 [ 0.517147] iommu: Adding device 700d0000.xudc to group 32 [ 0.520596] vdd-ac-bat: 5000 mV [ 0.520983] vdd-5v0-sys: 5000 mV [ 0.521974] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.522066] vdd-5v0-hdmi: 5000 mV [ 0.522483] vdd-1v8-sys: 1800 mV [ 0.522884] vdd-fan: supplied by vdd-5v0-sys [ 0.522938] vdd-fan: 5000 mV [ 0.523329] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.523408] vdd-usb-vbus: 5000 mV [ 0.523957] vdd-usb-vbus2: 5000 mV [ 0.553906] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.556391] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.558452] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.558497] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.558888] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.566870] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.567242] SCSI subsystem initialized [ 0.567491] libata version 3.00 loaded. [ 0.567778] usbcore: registered new interface driver usbfs [ 0.567849] usbcore: registered new interface driver hub [ 0.567938] usbcore: registered new device driver usb [ 0.571928] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.577236] vdd-core: 600 <--> 1162 mV at 1125 mV [ 0.577410] random: fast init done [ 0.578181] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.581029] vdd-ddr-1v1: 1150 mV [ 0.585018] vdd-pre-reg-1v35: 1350 mV [ 0.589022] vdd-1v8: 1800 mV [ 0.593018] avdd-sys-1v2: 1200 mV [ 0.597019] vdd-pex-1v0: 1050 mV [ 0.597658] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.598219] max77620-ldo3: at 3100 mV [ 0.601021] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.601625] max77620-ldo5: at 3100 mV [ 0.602211] max77620-ldo6: at 2800 mV [ 0.604262] avdd-1v05-pll: 1050 mV [ 0.608260] avdd-io-hdmi-dp: 1050 mV [ 0.610786] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.611132] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.611450] max77620 4-003c: max77620 probe successful [ 0.614278] media: Linux media interface: v0.10 [ 0.614351] Linux video capture interface: v2.00 [ 0.615296] pps_core: LinuxPPS API ver. 1 registered [ 0.615326] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.615365] PTP clock support registered [ 0.619010] tegra_fiq_debugger_init: found FIQ source (IRQ 98) [ 0.625469] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.626331] Advanced Linux Sound Architecture Driver Initialized. [ 0.627014] Bluetooth: Core ver 2.22 [ 0.627114] NET: Registered protocol family 31 [ 0.627132] Bluetooth: HCI device and connection manager initialized [ 0.627160] Bluetooth: HCI socket layer initialized [ 0.627182] Bluetooth: L2CAP socket layer initialized [ 0.627220] Bluetooth: SCO socket layer initialized [ 0.628987] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.629027] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.629089] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.629116] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.632488] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.633796] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.633875] vdd-3v3-sys: 3300 mV [ 0.634160] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.636322] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.636781] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.636864] vdd-3v3-sd: 3300 mV [ 0.637731] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.637793] avdd-io-edp-1v05: 1050 mV [ 0.638280] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.638332] vdd-usb-hub-en: 5000 mV [ 0.639653] camchar: rtcpu character device driver loaded [ 0.640457] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.641850] clocksource: Switched to clocksource arch_sys_counter [ 0.683575] VFS: Disk quotas dquot_6.6.0 [ 0.683751] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.684259] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.684713] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.684767] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.684992] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.685014] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.685042] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.685098] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.685124] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.685154] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.685178] nvmap_page_pool_init: Total RAM pages: 1009337 [ 0.685195] nvmap_page_pool_init: nvmap page pool size: 126167 pages (492 MB) [ 0.685319] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.685798] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.686923] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.695081] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.695531] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.695796] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.696028] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.696230] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.696550] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.696570] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.697031] NET: Registered protocol family 2 [ 0.698152] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.698396] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.698945] TCP: Hash tables configured (established 32768 bind 32768) [ 0.699119] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.699218] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.699658] NET: Registered protocol family 1 [ 0.700407] RPC: Registered named UNIX socket transport module. [ 0.700436] RPC: Registered udp transport module. [ 0.700453] RPC: Registered tcp transport module. [ 0.700470] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.700498] PCI: CLS 0 bytes, default 64 [ 0.700721] Trying to unpack rootfs image as initramfs... [ 0.934590] Freeing initrd memory: 5356K [ 0.944666] host1x 50000000.host1x: initialized [ 0.946615] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.950047] audit: initializing netlink subsys (disabled) [ 0.950172] audit: type=2000 audit(0.799:1): initialized [ 0.950995] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.961182] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.962779] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.963604] 9p: Installing v9fs 9p2000 file system support [ 0.967006] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.967165] io scheduler noop registered [ 0.967470] io scheduler cfq registered (default) [ 0.970237] gic 702f9000.agic: GIC IRQ controller registered [ 0.973052] iommu: Adding device 702ef000.adsp to group 33 [ 0.982553] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 0.982757] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.983401] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x79a9c10 [ 0.983435] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.985115] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.985243] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.985362] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.985567] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 0.985685] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 0.985792] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 0.985954] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 0.986074] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 0.986189] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 0.986299] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 0.992295] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.994106] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.996082] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.997399] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.997755] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.999083] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.999344] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000 [ 0.999622] Adding domain tsec-pd to PM domain host1x-pd [ 1.002047] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.003007] tsec 54500000.tsec: initialized [ 1.004595] tsec 54100000.tsecb: initialized [ 1.005320] Adding domain nvdec-pd to PM domain host1x-pd [ 1.008907] nvdec 54480000.nvdec: initialized [ 1.009996] Adding domain vic03-pd to PM domain host1x-pd [ 1.010194] Adding domain msenc-pd to PM domain host1x-pd [ 1.010368] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.014428] falcon 54340000.vic: initialized [ 1.015719] falcon 544c0000.nvenc: initialized [ 1.017067] falcon 54380000.nvjpg: initialized [ 1.021559] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 1.021646] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.021699] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.021716] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.021918] display board info: id 0x0, fab 0x0 [ 1.022014] generic_infoframe_type: 0x87 [ 1.022066] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.022090] tegra_cec 70015000.tegra_cec: probed [ 1.022193] tegradc tegradc.0: DT parsed successfully [ 1.022262] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0 [ 1.022812] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781 [ 1.029710] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.034725] tegradc tegradc.0: probed [ 1.035333] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.036887] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.037577] kfuse 7000fc00.kfuse: initialized [ 1.039432] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.040424] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.042370] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 1.042429] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.042455] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 1.042478] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 1.042510] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.042603] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400 [ 1.042792] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.043536] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 1.043549] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.043613] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.043646] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.044039] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.044083] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.044295] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.044316] pci 0000:01:00.0: [8086:24fd] type 00 class 0x028000 [ 1.044383] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 1.044811] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.046272] vdd-gpu: applied init 1000000uV constraint [ 1.046316] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.046793] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.052352] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.052562] No Device Node present for smmu client: serial8250 !! [ 1.052599] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.052699] iommu: Adding device serial8250 to group 35 [ 1.054109] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.054385] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 1.054434] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 1.054480] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 1.054506] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 1.054730] pci 0000:02:00.0: supports D1 D2 [ 1.054734] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.058188] console [ttyS0] disabled [ 1.058355] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.065995] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 1.066076] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 1.066082] pci 0000:00:02.0: BAR 14: assigned [mem 0x13100000-0x131fffff] [ 1.066088] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 1.066099] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 1.066126] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.066135] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 1.066146] pci 0000:02:00.0: BAR 4: assigned [mem 0x13100000-0x13103fff 64bit] [ 1.066165] pci 0000:02:00.0: BAR 2: assigned [mem 0x13104000-0x13104fff 64bit] [ 1.066183] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 1.066191] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.066195] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 1.066200] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 1.066759] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.066763] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.066770] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 1.066895] aer 0000:00:01.0:pcie002: service driver aer loaded [ 1.067128] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.067131] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.067137] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 1.067240] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.037881] tegra_cec 70015000.tegra_cec: Can't find physical addresse. [ 2.037885] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 3.525339] console [ttyS0] enabled [ 3.526000] Console: switching to colour frame buffer device 240x67 [ 3.526986] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 3.527328] serial-tegra 70006200.serial: RX in PIO mode [ 3.527427] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 3.528473] [drm] Initialized [ 3.551847] brd: module loaded [ 3.566103] loop: module loaded [ 3.566207] tegra_profiler: version: 1.139, samples/io: 47/27 [ 3.566331] tegra_profiler: auth: init [ 3.570817] THERMAL EST: found 2 subdevs [ 3.570825] THERMAL EST num_resources: 0 [ 3.570830] [THERMAL EST subdev 0] [ 3.570836] [THERMAL EST subdev 1] [ 3.571337] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 3.571340] THERMAL EST: thz register success. [ 3.571505] THERMAL EST: end of probe, return err: 0 [ 3.572625] hisi_sas: driver version v1.6 [ 3.577773] tegra-qspi 70410000.spi: Prod settings list not found [ 3.578988] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 3.578995] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 3.591423] libphy: Fixed MDIO Bus: probed [ 3.592064] tun: Universal TUN/TAP device driver, 1.6 [ 3.592067] tun: (C) 1999-2004 Max Krasnyansky [ 3.593070] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.593074] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.593135] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.593137] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.593188] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.593190] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.593249] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 3.593252] Copyright(c) 1999 - 2017 Intel Corporation. [ 3.594243] r8168 0000:02:00.0: enabling device (0000 -> 0003) [ 3.594273] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 3.608986] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 3.609051] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 3.609615] PPP generic driver version 2.4.2 [ 3.609815] PPP BSD Compression module registered [ 3.609819] PPP Deflate Compression module registered [ 3.609888] PPP MPPE Compression module registered [ 3.609895] NET: Registered protocol family 24 [ 3.609978] usbcore: registered new interface driver r8152 [ 3.610027] usbcore: registered new interface driver asix [ 3.610085] usbcore: registered new interface driver ax88179_178a [ 3.610125] usbcore: registered new interface driver cdc_ether [ 3.610162] usbcore: registered new interface driver net1080 [ 3.610207] usbcore: registered new interface driver cdc_subset [ 3.610241] usbcore: registered new interface driver zaurus [ 3.610293] usbcore: registered new interface driver cdc_ncm [ 3.610538] VFIO - User Level meta-driver version: 0.3 [ 3.611926] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.611953] ehci-pci: EHCI PCI platform driver [ 3.612002] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.612011] ohci-pci: OHCI PCI platform driver [ 3.612055] ohci-platform: OHCI generic platform driver [ 3.614834] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 3.615434] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 3.616620] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f9079800 id [ 3.618949] usbcore: registered new interface driver uas [ 3.619016] usbcore: registered new interface driver usb-storage [ 3.619147] usbcore: registered new interface driver usbserial [ 3.619520] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 3.619615] tegra-xusb 70090000.xusb: xHCI Host Controller [ 3.619651] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 3.620443] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 3.620511] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 3.620723] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.620728] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.620733] usb usb1: Product: xHCI Host Controller [ 3.620737] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 3.620740] usb usb1: SerialNumber: 70090000.xusb [ 3.621344] hub 1-0:1.0: USB hub found [ 3.621387] hub 1-0:1.0: 5 ports detected [ 3.622152] tegra-xusb 70090000.xusb: xHCI Host Controller [ 3.622164] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 3.622313] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.622412] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.622418] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.622422] usb usb2: Product: xHCI Host Controller [ 3.622426] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 3.622430] usb usb2: SerialNumber: 70090000.xusb [ 3.622914] hub 2-0:1.0: USB hub found [ 3.622942] hub 2-0:1.0: 4 ports detected [ 3.625176] tegra-xudc-new 700d0000.xudc: device count: 1 [ 3.626562] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 3.626577] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 3.626611] tegra-xudc-new 700d0000.xudc: entering ELPG [ 3.626860] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 3.627538] mousedev: PS/2 mouse device common for all mice [ 3.627647] usbcore: registered new interface driver xpad [ 3.725944] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 3.726005] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 3.754951] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.757446] rtc rtc1: alarm rtc device [ 3.757464] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 3.757492] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 3.758111] i2c /dev entries driver [ 3.760069] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6 [ 3.785508] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.788168] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 3.788174] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 3.788640] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.788656] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 3.788665] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 3.788832] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.788842] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 3.788848] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 3.788998] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.789008] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 3.789012] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 3.789192] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 3.790052] tegra_aotag tegra-aotag: Registering sensor 0 [ 3.790110] tegra_aotag tegra-aotag: Invalid temp readout [ 3.790138] tegra_aotag tegra-aotag: Invalid temp readout [ 3.790154] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 3.790163] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 3.791093] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.791113] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 3.791290] tegra_aotag tegra-aotag: Invalid temp readout [ 3.791317] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 3.791715] parse_throttle_dt_data: Num cap clks = 6 [ 3.791720] parse_throttle_dt_data: clk=cclk_g type=2 [ 3.791735] parse_throttle_dt_data: clk=gpu type=4 [ 3.791762] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 3.791780] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 3.791800] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 3.791803] parse_throttle_dt_data: clk=emc type=3 [ 3.792210] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.792307] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.792477] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.793250] FAN dev name: pwm-fan [ 3.793346] FAN:gpio request success. [ 3.793422] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 3.793747] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 3.793958] pwm_fan_driver pwm-fan: fan tach request irq success [ 3.793967] pwm_fan_driver pwm-fan: tach period: 1000 [ 3.794081] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 3.794086] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 3.794090] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 3.794094] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 3.794098] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 3.794102] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 3.794106] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 3.794109] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 3.794113] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 3.794117] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 3.794745] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds. [ 3.795110] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1) [ 3.796031] device-mapper: uevent: version 1.0.3 [ 3.796564] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.802091] tegra210-cpufreq cpufreq: probe()...completed [ 3.802883] sdhci: Secure Digital Host Controller Interface driver [ 3.802884] sdhci: Copyright(c) Pierre Ossman [ 3.802885] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.803378] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 3.803721] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 3.803842] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 3.808017] tegra-se 70012000.se: tegra_se_probe: complete [ 3.808512] hidraw: raw HID events driver (C) Jiri Kosina [ 3.809668] usbcore: registered new interface driver usbhid [ 3.809670] usbhid: USB HID core driver [ 3.811753] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 3.811919] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 3.813631] nvpmodel: initialized successfully [ 3.814620] usbcore: registered new interface driver snd-usb-audio [ 3.814674] No Device Node present for smmu client: snd-soc-dummy !! [ 3.814678] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 3.814704] iommu: Adding device snd-soc-dummy to group 36 [ 3.829241] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 3.830489] OPE platform probe [ 3.830582] OPE platform probe successful [ 3.830911] OPE platform probe [ 3.830990] OPE platform probe successful [ 3.846155] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 3.859101] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 3.859229] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 3.859347] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 3.859475] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 3.859593] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 3.859712] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 3.859834] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 3.859951] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 3.860072] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 3.860190] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 3.871564] u32 classifier [ 3.871580] Actions configured [ 3.871653] Initializing XFRM netlink socket [ 3.872369] NET: Registered protocol family 10 [ 3.873037] NET: Registered protocol family 17 [ 3.873048] NET: Registered protocol family 15 [ 3.873120] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.873167] Bluetooth: RFCOMM socket layer initialized [ 3.873176] Bluetooth: RFCOMM ver 1.11 [ 3.873180] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.873185] Bluetooth: HIDP socket layer initialized [ 3.873202] 9pnet: Installing 9P2000 support [ 3.873239] Key type dns_resolver registered [ 3.879651] Registered cp15_barrier emulation handler [ 3.879658] Registered setend emulation handler [ 3.880716] registered taskstats version 1 [ 3.881350] Adding domain ve2-pd to PM domain host1x-pd [ 3.881589] Adding domain ve-pd to PM domain host1x-pd [ 3.949902] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 3.985069] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 3.985072] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.985075] usb 1-2: Product: 4-Port USB 2.1 Hub [ 3.985077] usb 1-2: Manufacturer: Generic [ 3.986388] hub 1-2:1.0: USB hub found [ 3.988369] hub 1-2:1.0: 4 ports detected [ 4.060737] mmc0: hw tuning done ... [ 4.060768] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 4.061144] mmcblk0: mmc0:aaaa SH64G 59.5 GiB [ 4.063193] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 4.113897] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 4.139764] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b [ 4.139767] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.281900] usb 1-2.2: new full-speed USB device number 4 using tegra-xusb [ 4.308542] usb 1-2.2: New USB device found, idVendor=1d50, idProduct=6029 [ 4.308545] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.308547] usb 1-2.2: Product: Marlin USB Device [ 4.308550] usb 1-2.2: Manufacturer: marlinfw.org [ 4.308552] usb 1-2.2: SerialNumber: 0B00100FAF1E90C55AABBB7CF50020C6 [ 4.309923] usb-storage 1-2.2:1.2: USB Mass Storage device detected [ 4.310309] scsi host0: usb-storage 1-2.2:1.2 [ 4.389898] usb 1-2.3: new full-speed USB device number 5 using tegra-xusb [ 4.416112] usb 1-2.3: New USB device found, idVendor=045e, idProduct=07b2 [ 4.416116] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.416118] usb 1-2.3: Product: Microsoft® 2.4GHz Transceiver v8.0 [ 4.416120] usb 1-2.3: Manufacturer: Microsoft [ 4.421637] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/70090000.xusb/usb1/1-2/1-2.3/1-2.3:1.0/0003:045E:07B2.0001/input/input1 [ 4.478231] hid-generic 0003:045E:07B2.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-70090000.xusb-2.3/input0 [ 4.483017] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/70090000.xusb/usb1/1-2/1-2.3/1-2.3:1.1/0003:045E:07B2.0002/input/input2 [ 4.483375] hid-generic 0003:045E:07B2.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-70090000.xusb-2.3/input1 [ 4.499482] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/70090000.xusb/usb1/1-2/1-2.3/1-2.3:1.2/0003:045E:07B2.0003/input/input3 [ 4.562069] hid-generic 0003:045E:07B2.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-70090000.xusb-2.3/input2 [ 5.006931] tegradc tegradc.0: fb registered [ 5.016097] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 5.023347] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m [ 5.031758] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 5.038899] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 5.071713] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 5.077835] Extcon AUX1(HDMI) enable [ 5.081823] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 5.088230] tegradc tegradc.1: No lt-data, using default setting [ 5.094257] tegradc tegradc.1: No hpd-gpio in DT [ 5.098891] tegradc tegradc.1: DT parsed successfully [ 5.103961] tegradc tegradc.1: Display dc.ffffff800d4c0000 registered with id=1 [ 5.112006] tegradc tegradc.1: dpd enable lookup fail:-19 [ 5.120422] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244 [ 5.121253] tegradc tegradc.1: probed [ 5.134407] tegradc tegradc.1: fb registered [ 5.141803] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 5.147018] isp 54600000.isp: initialized [ 5.147728] isp 54680000.isp: initialized [ 5.156979] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 5.157882] last reset is due to software reset [ 5.157884] KERNEL: PMC reset status reg: 0x3 [ 5.157962] BL: PMC reset status reg: 0x3 [ 5.157964] BL: PMIC poweroff Event Recorder: 0x0 [ 5.159725] clk_cbus_recalc_rate: no gbus parent [ 5.159730] clk_cbus_round_rate: no gbus parent [ 5.159731] clk_cbus_round_rate: no gbus parent [ 5.159737] clk_cbus_recalc_rate: no gbus parent [ 5.159841] clk_cbus_recalc_rate: no gbus parent [ 5.159844] clk_cbus_round_rate: no gbus parent [ 5.159846] clk_cbus_round_rate: no gbus parent [ 5.159849] clk_cbus_recalc_rate: no gbus parent [ 5.159862] tegra_dvfs: GPU-cap: registered [ 5.159916] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 5.159918] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled [ 5.159920] tegra dvfs: vdd-gpu: nominal 1078mV, offset 708000uV, step 10000uV, scaling enabled [ 5.161322] tegra_dvfs: vdd-gpu-vts: registered [ 5.162005] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 5.162647] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 5.163162] input: gpio-keys as /devices/gpio-keys/input/input4 [ 5.196099] tegra_rtc 7000e000.rtc: setting system clock to 2020-04-17 08:20:55 UTC (1587111655) [ 5.197129] vi 54080000.vi: vi_probe: ++ [ 5.199915] vi 54080000.vi: initialized [ 5.204784] vi 54080000.vi: subdev nvcsi--1 bound [ 5.204797] vi 54080000.vi: subdev imx219 6-0010 bound [ 5.205596] mmcblk mmc0:aaaa: Card claimed for testing. [ 5.206151] Disable partitions left on by BL [ 5.206154] disb [ 5.206190] bwmgr: missing cdev-type property [ 5.206321] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.206326] DRAM derating cdev registered. [ 5.207440] vdd-fan: disabling [ 5.207442] vdd-usb-vbus: disabling [ 5.207444] vdd-usb-vbus2: disabling [ 5.207453] avdd-io-edp-1v05: disabling [ 5.207606] ALSA device list: [ 5.207609] #0: tegra-hda at 0x70038000 irq 83 [ 5.207610] #1: tegra-snd-t210ref-mobile-rt565x [ 5.334674] scsi 0:0:0:0: Direct-Access Marlin SDCard 01 1.0 PQ: 0 ANSI: 0 CCS [ 5.335576] sd 0:0:0:0: [sda] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) [ 5.336105] sd 0:0:0:0: [sda] Write Protect is off [ 5.336109] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00 [ 5.336595] sd 0:0:0:0: [sda] Asking for cache data failed [ 5.336599] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.347409] sda: sda1 [ 5.349339] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.399916] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 5.399971] tegradc tegradc.0: blank - powerdown [ 5.438307] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 5.438308] Extcon AUX1(HDMI) disable [ 5.485647] tegradc tegradc.0: unblank [ 5.525481] tegradc tegradc.0: nominal-pclk:592250000 parent:592246875 div:1.0 pclk:592246875 586327500~645552500 [ 5.525532] tegradc tegradc.0: hdmi: tmds rate:592250K prod-setting:prod_c_hdmi_300m_600m [ 5.526563] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 5.526569] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 5.593934] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 5.593936] Extcon AUX1(HDMI) enable [ 5.594188] tegradc tegradc.0: sync windows ret = 250 [ 5.676646] tegradc tegradc.1: blank - powerdown [ 5.681314] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 5.681316] Extcon DP: HPD disabled [ 5.681317] hpd: hpd_switch 0 [ 5.681320] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 5.681327] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 5.681331] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 5.714638] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 5.717680] Freeing unused kernel memory: 8576K [ 5.725368] Extcon HDMI: HPD enabled [ 5.725392] tegradc tegradc.0: hdmi: plugged [ 5.752353] Root device found: mmcblk0p1 [ 5.760195] Found dev node: /dev/mmcblk0p1 [ 5.812577] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.824409] Rootfs mounted over mmcblk0p1 [ 5.871453] Switching from initrd to actual rootfs [ 6.181919] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.202499] cgroup: cgroup2: unknown option "nsdelegate" [ 6.226786] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 6.252069] systemd[1]: Detected architecture arm64. [ 6.307956] systemd[1]: Set hostname to . [ 6.471323] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 6.491557] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 6.745703] random: systemd: uninitialized urandom read (16 bytes read) [ 6.755565] systemd[1]: Reached target User and Group Name Lookups. [ 6.768744] random: systemd: uninitialized urandom read (16 bytes read) [ 6.778710] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.792957] random: systemd: uninitialized urandom read (16 bytes read) [ 6.804579] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.822465] systemd[1]: Created slice System Slice. [ 6.834339] systemd[1]: Listening on Journal Socket. [ 6.892756] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 7.124222] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 7.740455] Adding 8388604k swap on /mnt/8GB.swap. Priority:-1 extents:28 across:11010044k SS [ 7.794264] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 7.794268] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 7.920815] systemd-journald[1998]: Received request to flush runtime journal from PID 1 [ 8.122775] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 8.158265] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 8.158271] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.158275] usb 2-1: Product: 4-Port USB 3.1 Hub [ 8.158279] usb 2-1: Manufacturer: Generic [ 8.162759] hub 2-1:1.0: USB hub found [ 8.164143] hub 2-1:1.0: 4 ports detected [ 8.321883] usb 2-1: usb_suspend_both: status 0 [ 8.322059] usb usb2: usb_suspend_both: status 0 [ 8.736466] Intel(R) Wireless WiFi driver for Linux [ 8.736471] Copyright(c) 2003- 2015 Intel Corporation [ 8.736693] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002) [ 8.786297] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2 [ 8.801874] iwlwifi 0000:01:00.0: Falling back to user helper [ 8.924954] random: crng init done [ 8.930539] random: 7 urandom warning(s) missed due to ratelimiting [ 9.025778] usbcore: registered new interface driver btusb [ 9.031063] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015 [ 9.032057] Bluetooth: hci0: Device revision is 16 [ 9.032061] Bluetooth: hci0: Secure boot is enabled [ 9.032063] Bluetooth: hci0: OTP lock is enabled [ 9.032066] Bluetooth: hci0: API lock is enabled [ 9.032068] Bluetooth: hci0: Debug lock is disabled [ 9.032071] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 9.297096] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi [ 9.509362] cdc_acm 1-2.2:1.0: ttyACM0: USB ACM device [ 9.521267] usbcore: registered new interface driver cdc_acm [ 9.521273] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 10.203035] using random self ethernet address [ 10.203038] using random host ethernet address [ 10.259284] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2 [ 10.259286] iwlwifi 0000:01:00.0: Falling back to user helper [ 10.408864] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.408876] Bluetooth: BNEP socket layer initialized [ 10.946708] Bluetooth: hci0: Waiting for firmware download to complete [ 10.947028] Bluetooth: hci0: Firmware loaded in 1876225 usecs [ 10.947143] Bluetooth: hci0: Waiting for device to boot [ 10.959065] Bluetooth: hci0: Device booted in 11685 usecs [ 10.961500] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc [ 10.964077] Bluetooth: hci0: Applying Intel DDC parameters completed [ 11.098898] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2 [ 11.112087] iwlwifi 0000:01:00.0: Falling back to user helper [ 11.192790] Mass Storage Function, version: 2009/09/11 [ 11.192797] LUN: removable file: (no medium) [ 11.197893] using random self ethernet address [ 11.208441] using random host ethernet address [ 11.455621] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2 [ 11.467263] iwlwifi 0000:01:00.0: Falling back to user helper [ 11.628930] iwlwifi 0000:01:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm [ 11.648526] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.650313] eth0: 0xffffff800a3dc000, 00:e0:4c:68:00:01, IRQ 406 [ 11.706622] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.774944] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230 [ 11.777428] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 11.778657] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 11.898466] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 11.899355] thermal thermal_zone6: failed to read out thermal zone (-5) [ 11.908607] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type iwlwifi [ 11.963751] rndis0: HOST MAC 72:03:09:9b:2b:78 [ 11.963815] rndis0: MAC 72:03:09:9b:2b:79 [ 11.964585] usb0: HOST MAC 72:03:09:9b:2b:7a [ 11.964613] usb0: MAC 72:03:09:9b:2b:7b [ 11.964632] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 11.967153] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 11.967170] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 11.967199] tegra-xudc-new 700d0000.xudc: entering ELPG [ 11.967430] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 11.967443] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 11.970636] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 11.970661] tegra-xudc-new 700d0000.xudc: entering ELPG [ 11.970947] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 11.976058] l4tbr0: port 1(rndis0) entered blocking state [ 11.976063] l4tbr0: port 1(rndis0) entered disabled state [ 11.976244] device rndis0 entered promiscuous mode [ 11.990321] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 11.997774] l4tbr0: port 2(usb0) entered blocking state [ 11.997780] l4tbr0: port 2(usb0) entered disabled state [ 11.998908] device usb0 entered promiscuous mode [ 12.007002] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 12.218246] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.220689] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 12.221135] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 12.339136] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 12.339583] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 12.398149] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.490327] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.933576] zram: Added device: zram0 [ 12.940460] zram: Added device: zram1 [ 12.943452] zram: Added device: zram2 [ 12.945294] zram: Added device: zram3 [ 12.964520] zram0: detected capacity change from 0 to 518565888 [ 12.992237] Adding 506408k swap on /dev/zram0. Priority:5 extents:1 across:506408k SS [ 12.996378] zram1: detected capacity change from 0 to 518565888 [ 13.014511] Adding 506408k swap on /dev/zram1. Priority:5 extents:1 across:506408k SS [ 13.019068] zram2: detected capacity change from 0 to 518565888 [ 13.039847] Adding 506408k swap on /dev/zram2. Priority:5 extents:1 across:506408k SS [ 13.048676] zram3: detected capacity change from 0 to 518565888 [ 13.071423] Adding 506408k swap on /dev/zram3. Priority:5 extents:1 across:506408k SS [ 15.488004] Bridge firewalling registered [ 15.534488] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 15.883921] Netfilter messages via NETLINK v0.30. [ 15.887541] ctnetlink v0.93: registering with nfnetlink. [ 16.158977] IPv6: ADDRCONF(NETDEV_UP): br-a5b59c219a24: link is not ready [ 16.428202] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 126.264573] wlan0: authenticate with 48:f8:b3:fa:b9:47 [ 126.274580] wlan0: send auth to 48:f8:b3:fa:b9:47 (try 1/3) [ 126.385931] wlan0: send auth to 48:f8:b3:fa:b9:47 (try 2/3) [ 126.387771] wlan0: authenticated [ 126.390008] wlan0: associate with 48:f8:b3:fa:b9:47 (try 1/3) [ 126.391584] wlan0: RX AssocResp from 48:f8:b3:fa:b9:47 (capab=0x1011 status=0 aid=1) [ 126.395586] wlan0: associated [ 126.407590] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready