=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2023.03.17 10:26:06 =~=~=~=~=~=~=~=~=~=~=~= ÿâ [0350.075] I> MB1 (version: 0.28.0.0-t234-54845784-ec016368) [0350.080] I> t234-A01-0-Silicon (0x12347) Prod [0350.085] I> Boot-mode : BPMP Diagnostic [0350.088] I> Emulation: [0350.091] I> Entry timestamp: 0x00000000 [0350.094] I> last_boot_error: 0x0 [0350.098] I> BR-BCT: preprod_dev_sign: 0 [0350.101] I> rst_source: 0x0, rst_level: 0x0 [0350.105] I> Task: Initialize MB2 params (0x5000d78d) [0350.111] I> MB2-params @ 0x40060000 [0350.114] I> Task: Crypto init (0x5001cb8d) [0350.118] I> Task: Secure debug controls (0x5000cd21) [0350.123] I> Task: strap war set (0x5000c70d) [0350.128] I> strap value(0x4000001) set to 0x4000001 [0350.132] I> Task: Program NV master stream id (0x5000ccd5) [0350.138] I> Task: Verify boot mode (0xd482021) [0350.144] I> Task: Alias fuses (0x500109cd) [0350.148] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0350.155] I> Task: Print SKU type (0x5000fee1) [0350.159] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0350.165] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0350.169] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [0350.173] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0350.177] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0350.182] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0350.186] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0350.190] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0350.194] I> FUSE_SKU_INFO_0 = 0xd0 [0350.197] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0350.202] I> FUSE_PACKAGE_INFO_0 = 0x2 [0350.205] I> SKU: Prod [0350.207] I> Task: Boost clocks (0x5001462d) [0350.211] I> Initializing PLLC2 for AXI_CBB. [0350.216] I> AXI_CBB : src = 35, divisor = 0 [0350.220] I> Task: Voltage monitor (0x50014639) [0350.224] I> VMON: Vmon re-calibration and fine tuning done [0350.230] I> Task: UPHY init (0x5000dced) [0350.234] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0350.239] I> Task: Boot device init (0x50000b39) [0350.244] I> Boot_device: RCM [0350.247] I> USB configuration success [0350.522] I> Task: TSC init (0x5001fa6d) [0350.526] I> Task: Enable WDT 5th expiry (0x50020699) [0350.530] I> Task: I2C register (0x50000ad9) [0350.535] I> Task: Reset FSI (0x50014635) [0350.538] I> Task: Enable clock-mon (0x5001fa5d) [0350.554] I> FMON: Fmon re-programming done [0350.558] I> Task: MB1 fixed firewalls (0x5001f0d9) [0350.567] I> Task: Load MB2/Applet/FSKP (0x5000d691) [0350.572] I> Loading MB2 Applet [0350.575] I> Active chain: 0 [0350.577] I> Slot: 0 [0350.579] I> Binary[21] block-0 (partition size: 0x50000) [0350.585] I> get_binary_info: Binary name: MB2-Applet [0350.590] I> Size of crypto header is 8192 [0350.594] I> BCH load address is : 0x4004e000 [0350.598] I> Size of crypto header is 8192 [0350.962] I> BCH of MB2-Applet read from storage [0350.966] I> BCH address is : 0x4004e000 [0350.970] I> MB2-Applet header integrity check is success [0350.975] I> Binary magic in BCH component 0 is MB2A [0350.980] I> component binary type is 21 [0350.984] I> Size of crypto header is 8192 [0350.995] I> MB2-Applet binary is read from storage [0351.000] I> MB2-Applet binary integrity check is success [0351.005] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b40) [0351.012] I> Task: Map CCPLEX SHARED carveout (0x5000d835) [0351.017] I> Task: Prepare MB2 params (0x5000d8f1) [0351.022] I> BR-BCT Boot Chain Fields [0351.026] I> u32_non_gpio_select_boot_chain : 0 [0351.030] I> u32_num_boot_chains : 0 [0351.035] I> bf_bl_gpio_select_boot_chain_1b : 0 [0351.040] I> Task: Misc NV security settings (0x5000d0f9) [0351.045] I> NVDEC sticky bits programming done [0351.050] I> Successfully powergated NVDEC [0351.054] I> Task: Disable/Reload WDT (0x500206e1) [0351.058] I> Programmed SLCG global override := 0x0 [0351.063] I> MB1: MSS reconfig completed I> Applet (version: 0.0.0.0-t234-54845784-80607037) I> t234-A01-0-Silicon (0x12347) I> Emulation: I> Entry timestamp: 0xffffffff I> Task: Pinmux init (0x4000062d) I> Task: Boot device init (0x400012e5) I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI-0l initialized successfully I> sdmmc DDR50 mode I> sdmmc bdev is already initialized E> Unknown device 7 E> Unknown device 8 I> Task: Partition Manager Init (0x40002d25) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 11 partitions in SDMMC_USER (instance 3) I> Task: I2C register (0x400006a5) I> Task: Register exit handlers (0x400005f5) I> Task: Enter 3p server (0x400018e9) I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000001 I> Populate eeprom info I> Populate eeprom info for module cvm I> Rebooting : reboot-recovery ÿâ [0003.612] I> MB1 (version: 0.28.0.0-t234-54845784-ec016368) [0003.618] I> t234-A01-0-Silicon (0x12347) Prod [0003.622] I> Boot-mode : BPMP Diagnostic [0003.626] I> Emulation: [0003.628] I> Entry timestamp: 0x00000000 [0003.632] I> last_boot_error: 0x0 [0003.635] I> BR-BCT: preprod_dev_sign: 0 [0003.639] I> rst_source: 0xb, rst_level: 0x1 [0003.643] I> Task: Initialize MB2 params (0x5000d78d) [0003.648] I> MB2-params @ 0x40060000 [0003.652] I> Task: Crypto init (0x5001cb8d) [0003.656] I> Task: Secure debug controls (0x5000cd21) [0003.661] I> Task: strap war set (0x5000c70d) [0003.665] I> strap value(0x4000001) set to 0x4000001 [0003.670] I> Task: Program NV master stream id (0x5000ccd5) [0003.675] I> Task: Verify boot mode (0xd482021) [0003.681] I> Task: Alias fuses (0x500109cd) [0003.686] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0003.693] I> Task: Print SKU type (0x5000fee1) [0003.697] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0003.702] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0003.707] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [0003.711] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0003.715] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0003.720] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0003.724] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0003.728] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0003.732] I> FUSE_SKU_INFO_0 = 0xd0 [0003.735] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0003.739] I> FUSE_PACKAGE_INFO_0 = 0x2 [0003.743] I> SKU: Prod [0003.745] I> Task: Boost clocks (0x5001462d) [0003.749] I> Initializing PLLC2 for AXI_CBB. [0003.754] I> AXI_CBB : src = 35, divisor = 0 [0003.758] I> Task: Voltage monitor (0x50014639) [0003.762] I> VMON: Vmon re-calibration and fine tuning done [0003.767] I> Task: UPHY init (0x5000dced) [0003.772] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0003.778] I> Task: Boot device init (0x50000b39) [0003.782] I> Boot_device: RCM [0003.785] I> USB configuration success [0004.052] I> Task: TSC init (0x5001fa6d) [0004.056] I> Task: Enable WDT 5th expiry (0x50020699) [0004.061] I> Task: I2C register (0x50000ad9) [0004.065] I> Task: Reset FSI (0x50014635) [0004.069] I> Task: Enable clock-mon (0x5001fa5d) [0004.085] I> FMON: Fmon re-programming done [0004.089] I> Task: MB1 fixed firewalls (0x5001f0d9) [0004.098] I> Task: Load MB2/Applet/FSKP (0x5000d691) [0004.102] I> Loading MB2 Applet [0004.106] I> Active chain: 0 [0004.108] I> Slot: 0 [0004.110] I> Binary[21] block-0 (partition size: 0x50000) [0004.116] I> get_binary_info: Binary name: MB2-Applet [0004.121] I> Size of crypto header is 8192 [0004.124] I> BCH load address is : 0x4004e000 [0004.129] I> Size of crypto header is 8192 [0004.493] I> BCH of MB2-Applet read from storage [0004.497] I> BCH address is : 0x4004e000 [0004.501] I> MB2-Applet header integrity check is success [0004.506] I> Binary magic in BCH component 0 is MB2A [0004.511] I> component binary type is 21 [0004.515] I> Size of crypto header is 8192 [0004.526] I> MB2-Applet binary is read from storage [0004.531] I> MB2-Applet binary integrity check is success [0004.536] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b40) [0004.543] I> Task: Map CCPLEX SHARED carveout (0x5000d835) [0004.548] I> Task: Prepare MB2 params (0x5000d8f1) [0004.553] I> BR-BCT Boot Chain Fields [0004.557] I> u32_non_gpio_select_boot_chain : 0 [0004.561] I> u32_num_boot_chains : 0 [0004.566] I> bf_bl_gpio_select_boot_chain_1b : 0 [0004.571] I> Task: Misc NV security settings (0x5000d0f9) [0004.576] I> NVDEC sticky bits programming done [0004.581] I> Successfully powergated NVDEC [0004.584] I> Task: Disable/Reload WDT (0x500206e1) [0004.589] I> Programmed SLCG global override := 0x0 [0004.594] I> MB1: MSS reconfig completed I> Applet (version: 0.0.0.0-t234-54845784-80607037) I> t234-A01-0-Silicon (0x12347) I> Emulation: I> Entry timestamp: 0xffffffff I> Task: Pinmux init (0x4000062d) I> Task: Boot device init (0x400012e5) I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI-0l initialized successfully I> sdmmc DDR50 mode I> sdmmc bdev is already initialized E> Unknown device 7 E> Unknown device 8 I> Task: Partition Manager Init (0x40002d25) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 11 partitions in SDMMC_USER (instance 3) I> Task: I2C register (0x400006a5) I> Task: Register exit handlers (0x400005f5) I> Task: Enter 3p server (0x400018e9) I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000001 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> Rebooting : reboot-recovery ÿâ [0075.916] I> MB1 (version: 0.28.0.0-t234-54845784-ec016368) [0075.921] I> t234-A01-0-Silicon (0x12347) Prod [0075.925] I> Boot-mode : Coldboot [0075.928] I> Emulation: [0075.931] I> Entry timestamp: 0x00000000 [0075.935] I> last_boot_error: 0x0 [0075.938] I> BR-BCT: preprod_dev_sign: 0 [0075.941] I> rst_source: 0xb, rst_level: 0x1 [0075.946] I> Task: Bootchain select WAR set (0x5000c741) [0075.951] I> Active chain: 0 [0075.953] I> Task: CRC check (0x5001dab5) [0075.957] I> Skip CRC check as records_integrity fuse is not burned [0075.963] I> Task: Initialize MB2 params (0x5000d78d) [0075.969] I> MB2-params @ 0x40060000 [0075.972] I> Task: Crypto init (0x5001cb8d) [0075.976] I> Task: Secure debug controls (0x5000cd21) [0075.981] I> Task: strap war set (0x5000c70d) [0075.985] I> strap value(0x4000001) set to 0x4000001 [0075.990] I> Task: Initialize SOC Therm (0x5001af85) [0075.995] I> Task: Program NV master stream id (0x5000ccd5) [0076.001] I> Task: Verify boot mode (0xd482021) [0076.006] I> Task: Alias fuses (0x500109cd) [0076.011] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0076.018] I> Task: Print SKU type (0x5000fee1) [0076.022] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0076.027] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0076.031] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [0076.036] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0076.040] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0076.044] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0076.048] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0076.052] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0076.057] I> FUSE_SKU_INFO_0 = 0xd0 [0076.060] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0076.064] I> FUSE_PACKAGE_INFO_0 = 0x2 [0076.068] I> SKU: Prod [0076.070] I> Task: Boost clocks (0x5001462d) [0076.074] I> Initializing PLLC2 for AXI_CBB. [0076.078] I> AXI_CBB : src = 35, divisor = 0 [0076.082] I> Task: Voltage monitor (0x50014639) [0076.087] I> VMON: Vmon re-calibration and fine tuning done [0076.092] I> Task: UPHY init (0x5000dced) [0076.097] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0076.102] I> Task: Boot device init (0x50000b39) [0076.107] I> Boot_device: RCM [0076.110] I> USB configuration success [0077.100] I> Task: TSC init (0x5001fa6d) [0077.104] I> Task: Load membct (0x50011fb9) [0077.108] I> RAM_CODE 0x4000001 [0077.111] I> Loading MEMBCT [0077.114] I> Active chain: 0 [0077.117] I> Slot: 0 [0077.119] I> Binary[0] block-0 (partition size: 0x40000) [0077.124] I> get_binary_info: Binary name: MEM-BCT-0 [0077.129] I> Size of crypto header is 8192 [0077.133] I> BCH load address is : 0x40050000 [0077.137] I> Size of crypto header is 8192 [0077.541] I> BCH of MEM-BCT-0 read from storage [0077.545] I> BCH address is : 0x40050000 [0077.549] I> MEM-BCT-0 header integrity check is success [0077.554] I> Binary magic in BCH component 0 is MEM0 [0077.559] I> component binary type is 0 [0077.564] I> MEM-BCT-0 binary is read from storage [0077.569] I> MEM-BCT-0 binary integrity check is success [0077.574] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0077.581] I> RAM_CODE 0x4000001 [0077.586] I> RAM_CODE 0x4000001 [0077.590] I> Task: Load Page retirement list (0x50011601) [0077.595] I> Task: SDRAM params override (0x50011f95) [0077.600] I> Task: Save mem-bct info (0x500147fd) [0077.605] I> Task: Carveout allocate (0x50014861) [0077.609] I> ECC region[0]: Start:0x0, End:0x0 [0077.614] I> ECC region[1]: Start:0x0, End:0x0 [0077.618] I> ECC region[2]: Start:0x0, End:0x0 [0077.622] I> ECC region[3]: Start:0x0, End:0x0 [0077.626] I> ECC region[4]: Start:0x0, End:0x0 [0077.631] I> Non-ECC region[0]: Start:0x80000000, End:0x880000000 [0077.637] I> Non-ECC region[1]: Start:0x0, End:0x0 [0077.641] I> Non-ECC region[2]: Start:0x0, End:0x0 [0077.646] I> Non-ECC region[3]: Start:0x0, End:0x0 [0077.650] I> Non-ECC region[4]: Start:0x0, End:0x0 [0077.660] I> allocated(CO:44) base:0x849800000 size:0x36800000 align: 0x100000 [0077.667] I> allocated(CO:31) base:0x840000000 size:0x8000000 align: 0x8000000 [0077.674] I> allocated(CO:43) base:0x83c000000 size:0x4000000 align: 0x200000 [0077.681] I> allocated(CO:20) base:0x83a000000 size:0x2000000 align: 0x2000000 [0077.688] I> allocated(CO:24) base:0x838000000 size:0x2000000 align: 0x2000000 [0077.696] I> allocated(CO:28) base:0x836000000 size:0x2000000 align: 0x2000000 [0077.703] I> allocated(CO:29) base:0x834000000 size:0x2000000 align: 0x2000000 [0077.710] I> allocated(CO:22) base:0x848000000 size:0x1000000 align: 0x1000000 [0077.717] I> allocated(CO:41) base:0x833000000 size:0x1000000 align: 0x100000 [0077.724] I> allocated(CO:35) base:0x832200000 size:0xe00000 align: 0x10000 [0077.731] I> allocated(CO:02) base:0x849000000 size:0x800000 align: 0x800000 [0077.738] I> allocated(CO:03) base:0x831800000 size:0x800000 align: 0x800000 [0077.745] I> allocated(CO:06) base:0x831000000 size:0x800000 align: 0x800000 [0077.752] I> allocated(CO:10) base:0x830800000 size:0x800000 align: 0x800000 [0077.758] I> allocated(CO:56) base:0x830000000 size:0x800000 align: 0x200000 [0077.765] I> allocated(CO:07) base:0x82fc00000 size:0x400000 align: 0x400000 [0077.772] I> allocated(CO:33) base:0x82f800000 size:0x400000 align: 0x200000 [0077.779] I> allocated(CO:01) base:0x832100000 size:0x100000 align: 0x100000 [0077.786] I> allocated(CO:04) base:0x832000000 size:0x100000 align: 0x100000 [0077.793] I> allocated(CO:05) base:0x82f700000 size:0x100000 align: 0x100000 [0077.800] I> allocated(CO:08) base:0x82f600000 size:0x100000 align: 0x100000 [0077.807] I> allocated(CO:09) base:0x82f500000 size:0x100000 align: 0x100000 [0077.814] I> allocated(CO:15) base:0x82f400000 size:0x100000 align: 0x100000 [0077.821] I> allocated(CO:17) base:0x82f300000 size:0x100000 align: 0x100000 [0077.828] I> allocated(CO:23) base:0x82f200000 size:0x100000 align: 0x100000 [0077.835] I> allocated(CO:27) base:0x82f100000 size:0x100000 align: 0x100000 [0077.842] I> allocated(CO:42) base:0x82f000000 size:0x100000 align: 0x100000 [0077.848] I> allocated(CO:54) base:0x82ef80000 size:0x80000 align: 0x80000 [0077.855] I> allocated(CO:34) base:0x82ef70000 size:0x10000 align: 0x10000 [0077.862] I> allocated(CO:46) base:0x800000000 size:0x20000000 align: 0x20000000 [0077.869] I> allocated(CO:47) base:0x82ea00000 size:0x400000 align: 0x200000 [0077.876] I> allocated(CO:72) base:0x82e800000 size:0x200000 align: 0x10000 [0077.883] I> allocated(CO:48) base:0x82ef50000 size:0x20000 align: 0x10000 [0077.890] I> allocated(CO:69) base:0x82ef30000 size:0x20000 align: 0x10000 [0077.897] I> allocated(CO:49) base:0x82ef20000 size:0x10000 align: 0x10000 [0077.903] I> allocated(CO:50) base:0x82ef10000 size:0x10000 align: 0x10000 [0077.910] I> allocated(CO:52) base:0x82ef00000 size:0x10000 align: 0x10000 [0077.917] I> NSDRAM base: 0x80000000, end: 0x82ef70000 [0077.922] I> Task: Thermal check (0x500208f9) [0077.926] I> max_chip_limit = 105 [0077.929] I> min_chip_limit = -28 [0077.932] I> max temp read = 33 [0077.935] I> min temp read = 32 [0077.938] I> Task: Update FSI SCR with thermal fuse data (0x50020a05) [0077.945] I> Task: Enable WDT 5th expiry (0x50020699) [0077.949] I> Task: I2C register (0x50000ad9) [0077.954] I> Task: Reset FSI (0x50014635) [0077.957] I> Task: Pinmux init (0x500137bd) [0077.962] I> Task: Prod config init (0x50013c09) [0077.966] I> Task: Pad voltage init (0x50013859) [0077.971] I> Task: Prod init (0x50013c4d) [0077.975] I> Task: Common rail init (0x50014305) [0077.980] W> PMIC_CONFIG: Rail: Thermal config not found in MB1 BCT. [0077.986] I> DONE: Thermal config [0077.990] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0077.998] I> DONE: SOC rail config [0078.002] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0078.009] I> DONE: MEMIO rail config [0078.012] I> DONE: GPU rail info [0078.015] I> DONE: CV rail info [0078.018] I> Task: Mem clock src (0x50011de5) [0078.022] I> Task: Misc. board config (0x500143ad) [0078.028] W> PMIC_CONFIG: Platform config not found in MB1 BCT. [0078.033] I> Task: SDRAM init (0x50011de9) [0078.040] I> SDRAM-params @ 0xd485000 [0078.043] I> MSS code-drop: NvBootSdramInit [0078.047] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 9 [0078.055] I> MSS CAR: Init PLLM [0078.058] I> MSS CAR: Init PLLHUB [0078.063] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0078.074] I> mb1_sdram_init Done ! [0078.077] I> SDRAM Size in Total 0x800000000 [0078.082] I> Task: Dram Ecc scrub (0x50011729) [0078.086] I> Task: DRAM alias check (0x50011f8d) [0078.117] I> Task: Program NSDRAM carveout (0x50015171) [0078.124] I> NSDRAM carveout encryption is enabled [0078.129] I> Program NSDRAM carveout [0078.134] I> Task: Register checker (0x50011f91) [0078.143] I> Task: Enable clock-mon (0x5001fa5d) [0078.159] I> FMON: Fmon re-programming done [0078.164] I> Task: Mapper init (0x5001dfed) [0078.169] I> Task: SC7 Context Init (0x5001fd5d) [0078.175] I> Task: CCPLEX IST init (0x5000d561) [0078.182] I> Task: CPU WP0 (0x5000c7a9) [0078.187] I> Loading MCE [0078.190] I> Active chain: 0 [0078.193] I> Slot: 0 [0078.196] I> Binary[8] block-0 (partition size: 0x80000) [0078.202] I> get_binary_info: Binary name: MCE [0078.207] I> Size of crypto header is 8192 [0078.212] I> BCH load address is : 0x4003e000 [0078.217] I> Size of crypto header is 8192 [0078.740] I> BCH of MCE read from storage [0078.744] I> BCH address is : 0x4003e000 [0078.750] I> MCE header integrity check is success [0078.755] I> Binary magic in BCH component 0 is MTSM [0078.760] I> component binary type is 8 [0078.765] I> Size of crypto header is 8192 [0078.778] I> MCE binary is read from storage [0078.783] I> MCE binary integrity check is success [0078.789] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0078.797] I> Size of crypto header is 8192 [0078.802] I> Sending WP0 mailbox command to PSC [0078.813] I> Task: XUSB Powergate (0x50000ae5) [0078.818] I> Skipping powergate XUSB. [0078.822] I> Task: MB1 fixed firewalls (0x5001f0d9) [0078.843] I> Task: Load bpmp-fw (0x5001f41d) [0078.849] I> Active chain: 0 [0078.852] I> Slot: 0 [0078.855] I> Binary[15] block-0 (partition size: 0x180000) [0078.861] I> get_binary_info: Binary name: BPMP_FW [0078.866] I> Size of crypto header is 8192 [0078.871] I> BCH load address is : 0x807fe000 [0078.877] I> Size of crypto header is 8192 [0078.882] I> BCH of BPMP_FW read from storage [0078.887] I> BCH address is : 0x807fe000 [0078.892] I> BPMP_FW header integrity check is success [0078.898] I> Binary magic in BCH component 0 is BPMF [0078.903] I> component binary type is 15 [0078.908] I> Size of crypto header is 8192 [0078.960] I> BPMP_FW binary is read from storage [0078.968] I> BPMP_FW binary integrity check is success [0078.973] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfdc40) [0078.982] I> Active chain: 0 [0078.985] I> Slot: 0 [0078.987] I> Binary[16] block-251658752 (partition size: 0x400000) [0078.995] I> get_binary_info: Binary name: BPMP_FW_DTB [0079.001] I> Size of crypto header is 8192 [0079.006] I> BCH load address is : 0x807fc000 [0079.012] I> Size of crypto header is 8192 [0079.017] I> BCH of BPMP_FW_DTB read from storage [0079.022] I> BCH address is : 0x807fc000 [0079.028] I> BPMP_FW_DTB header integrity check is success [0079.034] I> Binary magic in BCH component 0 is BPMD [0079.039] I> component binary type is 16 [0079.043] I> Size of crypto header is 8192 [0079.054] I> BPMP_FW_DTB binary is read from storage [0079.060] I> BPMP_FW_DTB binary integrity check is success [0079.066] I> Binary BPMP_FW_DTB loaded successfully at 0x807dbb70 (0x20480) [0079.076] I> Task: Load psc-fw (0x5001f5a5) [0079.081] I> Active chain: 0 [0079.085] I> Slot: 0 [0079.087] I> Binary[17] block-0 (partition size: 0xc0000) [0079.093] I> get_binary_info: Binary name: PSC_FW [0079.099] I> Size of crypto header is 8192 [0079.103] I> BCH load address is : 0x80ffe000 [0079.109] I> Size of crypto header is 8192 [0079.114] I> BCH of PSC_FW read from storage [0079.119] I> BCH address is : 0x80ffe000 [0079.125] I> PSC_FW header integrity check is success [0079.130] I> Binary magic in BCH component 0 is PFWP [0079.136] I> component binary type is 17 [0079.140] I> Size of crypto header is 8192 [0079.162] I> PSC_FW binary is read from storage [0079.168] I> PSC_FW binary integrity check is success [0079.173] I> Binary PSC_FW loaded successfully at 0x80000000 (0x59980) [0079.182] I> Task: Load nvdec-fw (0x5001f619) [0079.188] I> Active chain: 0 [0079.191] I> Slot: 0 [0079.194] I> Binary[7] block-0 (partition size: 0x100000) [0079.200] I> get_binary_info: Binary name: NVDEC [0079.205] I> Size of crypto header is 8192 [0079.210] I> BCH load address is : 0x800fe000 [0079.215] I> Size of crypto header is 8192 [0079.221] I> BCH of NVDEC read from storage [0079.225] I> BCH address is : 0x800fe000 [0079.231] I> NVDEC header integrity check is success [0079.236] I> Binary magic in BCH component 0 is NDEC [0079.242] I> component binary type is 7 [0079.246] I> Size of crypto header is 8192 [0079.264] I> NVDEC binary is read from storage [0079.270] I> NVDEC binary integrity check is success [0079.275] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0079.286] I> Task: Load tsec-fw (0x5001f9a5) [0079.292] I> TSEC-FW load support not enabled [0079.296] I> Task: GPIO interrupt map (0x50014541) [0079.303] I> Task: SC7 context save (0x5001fe9d) [0079.309] I> Task: Load MB2/Applet/FSKP (0x5000d691) [0079.315] I> Loading MB2 [0079.318] I> Active chain: 0 [0079.322] I> Slot: 0 [0079.324] I> Binary[6] block-0 (partition size: 0x80000) [0079.330] I> get_binary_info: Binary name: MB2 [0079.335] I> Size of crypto header is 8192 [0079.340] I> BCH load address is : 0x8007e000 [0079.346] I> Size of crypto header is 8192 [0079.351] I> BCH of MB2 read from storage [0079.355] I> BCH address is : 0x8007e000 [0079.361] I> MB2 header integrity check is success [0079.366] I> Binary magic in BCH component 0 is MB2B [0079.372] I> component binary type is 6 [0079.376] I> Size of crypto header is 8192 [0079.400] I> MB2 binary is read from storage [0079.406] I> MB2 binary integrity check is success [0079.412] I> Binary MB2 loaded successfully at 0x80000000 (0x68e00) [0079.420] I> Task: Map CCPLEX SHARED carveout (0x5000d835) [0079.427] I> Task: Prepare MB2 params (0x5000d8f1) [0079.435] I> BR-BCT Boot Chain Fields [0079.439] I> u32_non_gpio_select_boot_chain : 0 [0079.445] I> u32_num_boot_chains : 2 [0079.450] I> bf_bl_gpio_select_boot_chain_1b : 0 [0079.456] I> Task: Program misc carveouts (0x50014bcd) [0079.462] I> Program IPC carveouts [0079.470] I> Task: Dram ecc test (0x500117a5) [0079.476] I> Task: Misc NV security settings (0x5000d0f9) [0079.482] I> NVDEC sticky bits programming done [0079.488] I> Successfully powergated NVDEC [0079.492] I> Task: Disable/Reload WDT (0x500206e1) [0079.498] I> Programmed SLCG global override := 0x0 [0079.504] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-a9c0116a) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : RCM Flash I> Emulation: I> Entry timestamp: 0x04bdb64d I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x830000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e80) I> Task: PSC mailbox init (0x50015c10) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e2c) I> Task: Boot device init (0x50001d74) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001d70) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 11 partitions in SDMMC_USER (instance 3) I> Task: Trigger mailbox for PSC-BL1 exit (0x50015c90) I> Sending opcode 0x4d420802 to psc I> Received ACK from psc I> Task: Enter 3p server (0x50001f18) I> USB configuration success I> Populate storage info I> Erasing device 3: 0 I> QSPI: Erasing entire device I> Writing device 3: 0. I> Found 57 partitions in QSPI_FLASH (instance 0) I> Erasing device 1: 3 I> Writing device 1: 3. I> Writing device 1: 3. I> Found 14 partitions in SDMMC_USER (instance 3) I> Writing device 1: 3. I> Found 14 partitions in SDMMC_USER (instance 3) I> Writing A_mb1 partition. I> Writing A_psc_bl1 partition. I> Writing A_nvdec partition. I> Writing A_mb2 partition. I> Writing A_xusb-fw partition. I> Writing A_bpmp-fw partition. I> Writing A_bpmp-fw-dtb partition. I> Writing A_psc-fw partition. I> Writing A_mts-mce partition. I> Writing A_sc7 partition. I> Writing A_pscrf partition. I> Writing A_mb2rf partition. I> Writing A_cpu-bootloader partition. I> Writing A_secure-os partition. I> Writing A_eks partition. I> Writing A_dce-fw partition. I> Writing A_spe-fw partition. I> Writing A_rce-fw partition. I> Writing A_adsp-fw partition. I> Writing B_mb1 partition. I> Writing B_psc_bl1 partition. I> Writing B_nvdec partition. I> Writing B_mb2 partition. I> Writing B_xusb-fw partition. I> Writing B_bpmp-fw partition. I> Writing B_bpmp-fw-dtb partition. I> Writing B_psc-fw partition. I> Writing B_mts-mce partition. I> Writing B_sc7 partition. I> Writing B_pscrf partition. I> Writing B_mb2rf partition. I> Writing B_cpu-bootloader partition. I> Writing B_secure-os partition. I> Writing B_eks partition. I> Writing B_dce-fw partition. I> Writing B_spe-fw partition. I> Writing B_rce-fw partition. I> Writing B_adsp-fw partition. I> Writing B_VER partition. I> Writing A_VER partition. I> Writing device 1: 3. I> Writing A_kernel partition. I> Writing A_kernel-dtb partition. I> Writing B_kernel partition. I> Writing B_kernel-dtb partition. I> Writing recovery partition. I> Writing recovery-dtb partition. I> Writing esp partition. I> Writing APP partition. I> Writing secondary_gpt_backup partition. I> Writing BCT partition. I> Writing BCT-boot-chain_backup partition. I> Writing A_MB1_BCT partition. I> Writing B_MB1_BCT partition. I> Writing A_MEM_BCT partition. I> Writing B_MEM_BCT partition. I> Rebooting : reset-coldboot ÿâ [0000.063] I> MB1 (version: 0.28.0.0-t234-54845784-ec016368) [0000.069] I> t234-A01-0-Silicon (0x12347) Prod [0000.073] I> Boot-mode : Coldboot [0000.076] I> Emulation: [0000.078] I> Entry timestamp: 0x00000000 [0000.082] I> last_boot_error: 0x0 [0000.085] I> BR-BCT: preprod_dev_sign: 0 [0000.089] I> rst_source: 0xb, rst_level: 0x1 [0000.093] I> Task: Bootchain select WAR set (0x5000c741) [0000.098] I> Active chain: 0 [0000.101] I> Task: CRC check (0x5001dab5) [0000.105] I> Skip CRC check as records_integrity fuse is not burned [0000.111] I> Task: Initialize MB2 params (0x5000d78d) [0000.116] I> MB2-params @ 0x40060000 [0000.120] I> Task: Crypto init (0x5001cb8d) [0000.124] I> Task: Secure debug controls (0x5000cd21) [0000.129] I> Task: strap war set (0x5000c70d) [0000.133] I> strap value(0x4000001) set to 0x4000001 [0000.138] I> Task: Initialize SOC Therm (0x5001af85) [0000.143] I> Task: Program NV master stream id (0x5000ccd5) [0000.148] I> Task: Verify boot mode (0xd482021) [0000.154] I> Task: Alias fuses (0x500109cd) [0000.159] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.166] I> Task: Print SKU type (0x5000fee1) [0000.170] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0000.175] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.179] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [0000.184] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.188] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.192] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.196] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.200] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.204] I> FUSE_SKU_INFO_0 = 0xd0 [0000.208] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.212] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.216] I> SKU: Prod [0000.218] I> Task: Boost clocks (0x5001462d) [0000.222] I> Initializing PLLC2 for AXI_CBB. [0000.226] I> AXI_CBB : src = 35, divisor = 0 [0000.230] I> Task: Voltage monitor (0x50014639) [0000.235] I> VMON: Vmon re-calibration and fine tuning done [0000.240] I> Task: UPHY init (0x5000dced) [0000.244] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0000.250] I> Task: Boot device init (0x50000b39) [0000.254] I> Boot_device: QSPI_FLASH instance: 0 [0000.259] I> Qspi clock source : pllc_out0 [0000.263] I> QSPI Flash: Macronix 64MB [0000.267] I> QSPI-0l initialized successfully [0000.271] I> Task: TSC init (0x5001fa6d) [0000.275] I> Task: Load membct (0x50011fb9) [0000.279] I> RAM_CODE 0x4000001 [0000.282] I> Loading MEMBCT [0000.285] I> Active chain: 0 [0000.287] I> Slot: 0 [0000.289] I> Binary[0] block-0 (partition size: 0x40000) [0000.294] I> get_binary_info: Binary name: MEM-BCT-0 [0000.299] I> Size of crypto header is 8192 [0000.303] I> BCH load address is : 0x40050000 [0000.307] I> Size of crypto header is 8192 [0000.311] I> BCH of MEM-BCT-0 read from storage [0000.316] I> BCH address is : 0x40050000 [0000.320] I> MEM-BCT-0 header integrity check is success [0000.325] I> Binary magic in BCH component 0 is MEM0 [0000.330] I> component binary type is 0 [0000.334] I> MEM-BCT-0 binary is read from storage [0000.339] I> MEM-BCT-0 binary integrity check is success [0000.344] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.351] I> RAM_CODE 0x4000001 [0000.356] I> RAM_CODE 0x4000001 [0000.360] I> Task: Load Page retirement list (0x50011601) [0000.365] I> Task: SDRAM params override (0x50011f95) [0000.370] I> Task: Save mem-bct info (0x500147fd) [0000.375] I> Task: Carveout allocate (0x50014861) [0000.379] I> RCM blob carveout will not be allocated [0000.384] I> ECC region[0]: Start:0x0, End:0x0 [0000.388] I> ECC region[1]: Start:0x0, End:0x0 [0000.392] I> ECC region[2]: Start:0x0, End:0x0 [0000.397] I> ECC region[3]: Start:0x0, End:0x0 [0000.401] I> ECC region[4]: Start:0x0, End:0x0 [0000.405] I> Non-ECC region[0]: Start:0x80000000, End:0x880000000 [0000.411] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.416] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.420] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.425] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.435] I> allocated(CO:44) base:0x849800000 size:0x36800000 align: 0x100000 [0000.442] I> allocated(CO:31) base:0x840000000 size:0x8000000 align: 0x8000000 [0000.449] I> allocated(CO:43) base:0x83c000000 size:0x4000000 align: 0x200000 [0000.456] I> allocated(CO:20) base:0x83a000000 size:0x2000000 align: 0x2000000 [0000.463] I> allocated(CO:24) base:0x838000000 size:0x2000000 align: 0x2000000 [0000.470] I> allocated(CO:28) base:0x836000000 size:0x2000000 align: 0x2000000 [0000.477] I> allocated(CO:29) base:0x834000000 size:0x2000000 align: 0x2000000 [0000.484] I> allocated(CO:22) base:0x848000000 size:0x1000000 align: 0x1000000 [0000.492] I> allocated(CO:41) base:0x833000000 size:0x1000000 align: 0x100000 [0000.499] I> allocated(CO:35) base:0x832200000 size:0xe00000 align: 0x10000 [0000.505] I> allocated(CO:02) base:0x849000000 size:0x800000 align: 0x800000 [0000.512] I> allocated(CO:03) base:0x831800000 size:0x800000 align: 0x800000 [0000.519] I> allocated(CO:06) base:0x831000000 size:0x800000 align: 0x800000 [0000.526] I> allocated(CO:10) base:0x830800000 size:0x800000 align: 0x800000 [0000.533] I> allocated(CO:56) base:0x830000000 size:0x800000 align: 0x200000 [0000.540] I> allocated(CO:07) base:0x82fc00000 size:0x400000 align: 0x400000 [0000.547] I> allocated(CO:33) base:0x82f800000 size:0x400000 align: 0x200000 [0000.554] I> allocated(CO:01) base:0x832100000 size:0x100000 align: 0x100000 [0000.561] I> allocated(CO:04) base:0x832000000 size:0x100000 align: 0x100000 [0000.568] I> allocated(CO:05) base:0x82f700000 size:0x100000 align: 0x100000 [0000.575] I> allocated(CO:08) base:0x82f600000 size:0x100000 align: 0x100000 [0000.581] I> allocated(CO:09) base:0x82f500000 size:0x100000 align: 0x100000 [0000.588] I> allocated(CO:15) base:0x82f400000 size:0x100000 align: 0x100000 [0000.595] I> allocated(CO:17) base:0x82f300000 size:0x100000 align: 0x100000 [0000.602] I> allocated(CO:23) base:0x82f200000 size:0x100000 align: 0x100000 [0000.609] I> allocated(CO:27) base:0x82f100000 size:0x100000 align: 0x100000 [0000.616] I> allocated(CO:42) base:0x82f000000 size:0x100000 align: 0x100000 [0000.623] I> allocated(CO:54) base:0x82ef80000 size:0x80000 align: 0x80000 [0000.630] I> allocated(CO:34) base:0x82ef70000 size:0x10000 align: 0x10000 [0000.637] I> allocated(CO:47) base:0x82ea00000 size:0x400000 align: 0x200000 [0000.643] I> allocated(CO:72) base:0x82e800000 size:0x200000 align: 0x10000 [0000.650] I> allocated(CO:48) base:0x82ef50000 size:0x20000 align: 0x10000 [0000.657] I> allocated(CO:69) base:0x82ef30000 size:0x20000 align: 0x10000 [0000.664] I> allocated(CO:49) base:0x82ef20000 size:0x10000 align: 0x10000 [0000.670] I> allocated(CO:50) base:0x82ef10000 size:0x10000 align: 0x10000 [0000.677] I> allocated(CO:52) base:0x82ef00000 size:0x10000 align: 0x10000 [0000.684] I> NSDRAM base: 0x80000000, end: 0x82ef70000 [0000.689] I> Task: Thermal check (0x500208f9) [0000.693] I> max_chip_limit = 105 [0000.696] I> min_chip_limit = -28 [0000.699] I> max temp read = 38 [0000.702] I> min temp read = 37 [0000.705] I> Task: Update FSI SCR with thermal fuse data (0x50020a05) [0000.712] I> Task: Enable WDT 5th expiry (0x50020699) [0000.717] I> Task: I2C register (0x50000ad9) [0000.721] I> Task: Reset FSI (0x50014635) [0000.725] I> Task: Pinmux init (0x500137bd) [0000.729] I> Task: Prod config init (0x50013c09) [0000.734] I> Task: Pad voltage init (0x50013859) [0000.738] I> Task: Prod init (0x50013c4d) [0000.742] I> Task: Common rail init (0x50014305) [0000.747] W> PMIC_CONFIG: Rail: Thermal config not found in MB1 BCT. [0000.754] I> DONE: Thermal config [0000.757] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.766] I> DONE: SOC rail config [0000.769] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0000.776] I> DONE: MEMIO rail config [0000.779] I> DONE: GPU rail info [0000.782] I> DONE: CV rail info [0000.785] I> Task: Mem clock src (0x50011de5) [0000.789] I> Task: Misc. board config (0x500143ad) [0000.795] W> PMIC_CONFIG: Platform config not found in MB1 BCT. [0000.800] I> Task: SDRAM init (0x50011de9) [0000.807] I> SDRAM-params @ 0xd485000 [0000.810] I> MSS code-drop: NvBootSdramInit [0000.814] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 9 [0000.822] I> MSS CAR: Init PLLM [0000.825] I> MSS CAR: Init PLLHUB [0000.830] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0000.841] I> mb1_sdram_init Done ! [0000.844] I> SDRAM Size in Total 0x800000000 [0000.849] I> Task: Dram Ecc scrub (0x50011729) [0000.853] I> Task: DRAM alias check (0x50011f8d) [0000.884] I> Task: Program NSDRAM carveout (0x50015171) [0000.891] I> NSDRAM carveout encryption is enabled [0000.896] I> Program NSDRAM carveout [0000.900] I> Task: Register checker (0x50011f91) [0000.909] I> Task: Enable clock-mon (0x5001fa5d) [0000.925] I> FMON: Fmon re-programming done [0000.930] I> Task: Mapper init (0x5001dfed) [0000.935] I> Task: SC7 Context Init (0x5001fd5d) [0000.941] I> Task: CCPLEX IST init (0x5000d561) [0000.947] I> Task: CPU WP0 (0x5000c7a9) [0000.953] I> Loading MCE [0000.955] I> Active chain: 0 [0000.958] I> Slot: 0 [0000.961] I> Binary[8] block-0 (partition size: 0x80000) [0000.967] I> get_binary_info: Binary name: MCE [0000.971] I> Size of crypto header is 8192 [0000.976] I> BCH load address is : 0x4003e000 [0000.981] I> Size of crypto header is 8192 [0000.986] I> BCH of MCE read from storage [0000.990] I> BCH address is : 0x4003e000 [0000.996] I> MCE header integrity check is success [0001.001] I> Binary magic in BCH component 0 is MTSM [0001.006] I> component binary type is 8 [0001.010] I> Size of crypto header is 8192 [0001.017] I> MCE binary is read from storage [0001.022] I> MCE binary integrity check is success [0001.027] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0001.035] I> Size of crypto header is 8192 [0001.050] I> Size of crypto header is 8192 [0001.055] I> Sending WP0 mailbox command to PSC [0001.066] I> Task: XUSB Powergate (0x50000ae5) [0001.071] I> Skipping powergate XUSB. [0001.075] I> Task: MB1 fixed firewalls (0x5001f0d9) [0001.095] I> Task: Load bpmp-fw (0x5001f41d) [0001.101] I> Active chain: 0 [0001.104] I> Slot: 0 [0001.107] I> Binary[15] block-0 (partition size: 0x180000) [0001.113] I> get_binary_info: Binary name: BPMP_FW [0001.118] I> Size of crypto header is 8192 [0001.123] I> BCH load address is : 0x807fe000 [0001.128] I> Size of crypto header is 8192 [0001.133] I> BCH of BPMP_FW read from storage [0001.137] I> BCH address is : 0x807fe000 [0001.143] I> BPMP_FW header integrity check is success [0001.148] I> Binary magic in BCH component 0 is BPMF [0001.154] I> component binary type is 15 [0001.158] I> Size of crypto header is 8192 [0001.173] I> BPMP_FW binary is read from storage [0001.181] I> BPMP_FW binary integrity check is success [0001.186] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfdc40) [0001.194] I> Active chain: 0 [0001.197] I> Slot: 0 [0001.200] I> Binary[16] block-10000 (partition size: 0x400000) [0001.207] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.212] I> Size of crypto header is 8192 [0001.217] I> BCH load address is : 0x807fc000 [0001.222] I> Size of crypto header is 8192 [0001.227] I> BCH of BPMP_FW_DTB read from storage [0001.232] I> BCH address is : 0x807fc000 [0001.238] I> BPMP_FW_DTB header integrity check is success [0001.243] I> Binary magic in BCH component 0 is BPMD [0001.249] I> component binary type is 16 [0001.253] I> Size of crypto header is 8192 [0001.259] I> BPMP_FW_DTB binary is read from storage [0001.265] I> BPMP_FW_DTB binary integrity check is success [0001.271] I> Binary BPMP_FW_DTB loaded successfully at 0x807db9f0 (0x20480) [0001.280] I> Task: Load psc-fw (0x5001f5a5) [0001.285] I> Active chain: 0 [0001.289] I> Slot: 0 [0001.291] I> Binary[17] block-0 (partition size: 0xc0000) [0001.297] I> get_binary_info: Binary name: PSC_FW [0001.302] I> Size of crypto header is 8192 [0001.307] I> BCH load address is : 0x80ffe000 [0001.312] I> Size of crypto header is 8192 [0001.317] I> BCH of PSC_FW read from storage [0001.322] I> BCH address is : 0x80ffe000 [0001.327] I> PSC_FW header integrity check is success [0001.333] I> Binary magic in BCH component 0 is PFWP [0001.338] I> component binary type is 17 [0001.342] I> Size of crypto header is 8192 [0001.351] I> PSC_FW binary is read from storage [0001.357] I> PSC_FW binary integrity check is success [0001.362] I> Binary PSC_FW loaded successfully at 0x80000000 (0x59980) [0001.370] I> Task: Load nvdec-fw (0x5001f619) [0001.376] I> Active chain: 0 [0001.379] I> Slot: 0 [0001.382] I> Binary[7] block-0 (partition size: 0x100000) [0001.388] I> get_binary_info: Binary name: NVDEC [0001.393] I> Size of crypto header is 8192 [0001.397] I> BCH load address is : 0x800fe000 [0001.403] I> Size of crypto header is 8192 [0001.408] I> BCH of NVDEC read from storage [0001.412] I> BCH address is : 0x800fe000 [0001.418] I> NVDEC header integrity check is success [0001.423] I> Binary magic in BCH component 0 is NDEC [0001.428] I> component binary type is 7 [0001.432] I> Size of crypto header is 8192 [0001.440] I> NVDEC binary is read from storage [0001.446] I> NVDEC binary integrity check is success [0001.451] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0001.462] I> Task: Load tsec-fw (0x5001f9a5) [0001.467] I> TSEC-FW load support not enabled [0001.472] I> Task: GPIO interrupt map (0x50014541) [0001.478] I> Task: SC7 context save (0x5001fe9d) [0001.484] I> NV_SC7 Context addr: 0xa0000000 [0001.489] I> Active chain: 0 [0001.492] I> Slot: 0 [0001.495] I> Binary[27] block-0 (partition size: 0x100000) [0001.501] I> get_binary_info: Binary name: BR_BCT [0001.506] I> Size of crypto header is 8192 [0001.511] I> Size of crypto header is 8192 [0001.516] I> BR_BCT binary is read from storage [0001.521] I> BR_BCT binary integrity check is success [0001.526] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.534] I> Active chain: 0 [0001.537] I> Slot: 0 [0001.540] I> Binary[13] block-0 (partition size: 0x30000) [0001.546] I> get_binary_info: Binary name: SC7-FW [0001.551] I> Size of crypto header is 8192 [0001.555] I> Size of crypto header is 8192 [0001.560] I> BCH load address is : 0xa0002000 [0001.565] I> Size of crypto header is 8192 [0001.570] I> BCH of SC7-FW read from storage [0001.575] I> BCH address is : 0xa0002000 [0001.580] I> SC7-FW header integrity check is success [0001.586] I> Binary magic in BCH component 0 is WB0B [0001.591] I> component binary type is 13 [0001.595] I> Size of crypto header is 8192 [0001.601] I> SC7-FW binary is read from storage [0001.607] I> SC7-FW binary integrity check is success [0001.612] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x26220) [0001.621] I> Active chain: 0 [0001.624] I> Slot: 0 [0001.626] I> Binary[22] block-0 (partition size: 0x30000) [0001.632] I> get_binary_info: Binary name: PSC_RF [0001.637] I> Size of crypto header is 8192 [0001.642] I> Size of crypto header is 8192 [0001.646] I> BCH load address is : 0xa002a220 [0001.652] I> Size of crypto header is 8192 [0001.657] I> BCH of PSC_RF read from storage [0001.661] I> BCH address is : 0xa002a220 [0001.667] I> PSC_RF header integrity check is success [0001.672] I> Binary magic in BCH component 0 is PSCR [0001.678] I> component binary type is 22 [0001.682] I> Size of crypto header is 8192 [0001.688] I> PSC_RF binary is read from storage [0001.693] I> PSC_RF binary integrity check is success [0001.699] I> Binary PSC_RF loaded successfully at 0xa002c220 (0x1b000) [0001.721] I> Active chain: 0 [0001.724] I> Slot: 0 [0001.726] I> Binary[14] block-0 (partition size: 0x20000) [0001.732] I> get_binary_info: Binary name: MB2_RF [0001.737] I> Size of crypto header is 8192 [0001.742] I> Size of crypto header is 8192 [0001.747] I> BCH load address is : 0xa008ea48 [0001.752] I> Size of crypto header is 8192 [0001.757] I> BCH of MB2_RF read from storage [0001.762] I> BCH address is : 0xa008ea48 [0001.767] I> MB2_RF header integrity check is success [0001.772] I> Binary magic in BCH component 0 is MB2R [0001.778] I> component binary type is 14 [0001.782] I> Size of crypto header is 8192 [0001.788] I> MB2_RF binary is read from storage [0001.793] I> MB2_RF binary integrity check is success [0001.799] I> Binary MB2_RF loaded successfully at 0xa0090a48 (0x1bfa0) [0001.808] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.815] I> SC7 context fuse-bypass data is empty [0001.823] I> SC7 context save done [0001.827] I> Task: Load MB2/Applet/FSKP (0x5000d691) [0001.833] I> Loading MB2 [0001.836] I> Active chain: 0 [0001.839] I> Slot: 0 [0001.842] I> Binary[6] block-0 (partition size: 0x80000) [0001.848] I> get_binary_info: Binary name: MB2 [0001.853] I> Size of crypto header is 8192 [0001.857] I> BCH load address is : 0x8007e000 [0001.863] I> Size of crypto header is 8192 [0001.868] I> BCH of MB2 read from storage [0001.872] I> BCH address is : 0x8007e000 [0001.877] I> MB2 header integrity check is success [0001.882] I> Binary magic in BCH component 0 is MB2B [0001.888] I> component binary type is 6 [0001.892] I> Size of crypto header is 8192 [0001.901] I> MB2 binary is read from storage [0001.907] I> MB2 binary integrity check is success [0001.912] I> Binary MB2 loaded successfully at 0x80000000 (0x68e00) [0001.920] I> Task: Map CCPLEX SHARED carveout (0x5000d835) [0001.927] I> Task: Prepare MB2 params (0x5000d8f1) [0001.935] I> BR-BCT Boot Chain Fields [0001.939] I> u32_non_gpio_select_boot_chain : 0 [0001.944] I> u32_num_boot_chains : 2 [0001.949] I> bf_bl_gpio_select_boot_chain_1b : 0 [0001.955] I> Task: Program misc carveouts (0x50014bcd) [0001.961] I> Program IPC carveouts [0001.969] I> Task: Dram ecc test (0x500117a5) [0001.974] I> Task: Misc NV security settings (0x5000d0f9) [0001.981] I> NVDEC sticky bits programming done [0001.986] I> Successfully powergated NVDEC [0001.990] I> Task: Disable/Reload WDT (0x500206e1) [0001.996] I> Programmed SLCG global override := 0x0 [0002.001] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-a9c0116a) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x001f1e42 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x830000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e80) I> Task: Enable hot-plug capability (0x50025b5c) I> Task: PSC mailbox init (0x50015c10) I> Task: Crypto init (0x5000573c) I> Task: Enable GP-SE clock (0x50001fe4) I> Task: DICE Identity init (0x50018fcc) I> DICE is not enabled. I> Task: OEM SC7 context save init (0x500186cc) I> Task: I2C register (0x50001e44) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e2c) I> Task: Boot device init (0x50001d74) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001d70) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 14 partitions in SDMMC_USER (instance 3) I> Task: Load and authenticate registered FWs (0x5001bfc0) I> Task: Load AUXP FWs (0x500256fc) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x82f600000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x82f300000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x83a000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 9507824 bytes I> dce: plain binary integrity check is success I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x83a000000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x82fc00000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x82f700000 I> Task: Carveout setup (0x5001e6a0) I> Program remaining OEM carveouts I> Task: Enable FSITHERM (0x50015ae4) I> Task: Enable FSI VMON (0x5001566c) I> FSI VMON: FSI Vmon re-calibration and fine tuning done I> Task: Validate FSI Therm readings (0x500156c4) I> FSITHERM max temp = 38 I> FSITHERM min temp = 36 I> Task: Restore XUSB sec (0x50001d44) I> Task: Enable FSI SE clock (0x5001606c) I> Enable FSI-SE clock and 10ms delay... I> Task: Initialize SBSA UART CAR (0x50001f48) I> Task: Initialize CPUBL Params (0x50016f88) I> CPUBL-params @ 0x836000000 I> Task: Prepare eeprom data (0x50016d54) I> Task: FSI padctl context save (0x5001885c) I> Task: Unpowergate APE (0x500167cc) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: OEM firewalls (0x50022920) I> OEM firewalls configured I> Task: Powergate APE (0x50016940) I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings (0x50022ff0) I> Task: Unhalt AUXPs (0x50025964) I> Unhalting SPE.. I> Enabling combined UART ÿýÿàspe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 243b265b351d6bb9cc7b2e3acc5d90f8 spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler ÿá I> Task: Trigger mailbox for PSC-BL1 exit (0x50015c90) I> Sending opcode 0x4d420802 to psc ÿçINFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x848002000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: 8a33b23-73b589c-8a15f76-rel-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 ÿáI> Received ACK from psc I> TasÿçINFO: MONITOR: user task addr:0x848022000, blob offset:0x00020000 INFO: MONITOR: populated user images:13 INFO: mret to Supervisor! INFO: psc supervisor init. INFO: psc_irq_init... INFO: enter idle task. ÿâ bpmp: socket 0 bpmp: base binary md5 is ccd7dae126b648f6d4de17417b40e939 bpmp: combined binary md5 is 9a7bb16aee9be45a56e6b18b82f5e183 bpmp: firmware tag is 9a7bb16aee9be45a56e6-ccd7dae126b initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized tj_init initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ÿák: Start secure NOR provision (0x50018af8) I> Task: Load FSI keyblob (0x500160b4) I> Skipping FSI key blob copy I> Task: Unhaltÿâinitialized avfs_clk_platform initialized powergate ÿá AUXPs (0x5002596c) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalÿâinitialized dvs initialized clk_mach_config initialized pm suspend progress: 0x0 initialized suspend initialized strap initialized mce_dbell ÿå[ 2.479216] Camera-FW on t234-rce-safe started ÿát sÿåTCU early console enabled. ÿáuccessful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x50017080) I> Task: Load TOS (0x50017784) I> Task: Load and authenticate registered FWs (0x5001bfc0) I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_cpu-bootloader ÿè ÿáI> Size of partition: 3670016 I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloader ÿâinitialized emc initialized emc_mrq initialized clk_cal initialized uphy_dt initialized uphy_mrq initialized uphy initialized pg_late initialized pg_mrq_init swdtimer_init: 0 reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq ÿáI> Scratch RSV109: 0x00000001 active chain: 0 ÿâmissing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ÿáI> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name: A_secure-os I> MB2-params @ 0x40060000 I> cpubl: Authentication Finalize Done I> Binÿâinitialized clk_cal_late initialized noc_late initialized cvc ÿáary cpubl loaded successfully at 0x82eaÿâinitialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable pllc4_muxed enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable dsi_lp enable sdmmc_legacy_tm initialized clk_mach_post initialized pg_post initialized regulator_post ÿå[ 2.652480] Camera-FW on t234-rce-safe ready SHA1=10150ec0 (crt 12.946 ms,ÿâinitialized profile initialized fuse_late initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post bpmp: init complete ÿå total boot 187.270 ms) ÿá00000 I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x83fdfe000 I> Relocating OP-TEE dtb from: 0x83feff770 to 0x82ef30000, size: 0x1976 I> [0] START: 0x80000000, SIZE: 0x7aef70000 I> [1] START: 0x836000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x830000400 I> EKB detected (length: 0x410) @ VA:0x830000400 I> Task: Prepare TOS params (0x500176fc) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x82ef30000 I> Task: OEM SC7 context save (0x50018958) I> OEM sc7 context saved I> Task: Disable MSS perf stats (0x500259f8) I> Task: Program display sticky bits (0x50025974) I> Task: Storage device deinit (0x50001eec) I> Task: SMMU external bypass disable (0x50015bf4) I> Task: SMMU init (0x50015b10) I> Task: Program CBB PCIE AMAP regions (0x50018ce0) I> Task: Program GICv3 registers (0x50025a98) I> Task: Audit firewall settings (0x50022c08) I> Task: Bootchain failure check (0x5000242c) I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> MB2 finished ÿäNOTICE: BL31: v2.6(release):6363e7382 NOTICE: BL31: Built : 15:09:30, Jan 24 2023 I/TCÿèDCE: FW Bÿä:ÿèoot Done ÿä I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.19 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Jan 24 23:20:42 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: WARNING: Test OEM keys are being used! I/TC: This is only for TZ-SE testing and should NOT be used for a shipping product! I/TC: Primary CPU switching to normal world boot ÿá Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot I/TC: Secondary CPU 8 initializing I/TC: Secondary CPU 8 switching to normal world boot I/TC: Secondary CPU 9 initializing I/TC: Secondary CPU 9 switching to normal world boot I/TC: Secondary CPU 10 initializing I/TC: Secondary CPU 10 switching to normal world boot I/TC: Secondary CPU 11 initializing I/TC: Secondary CPU 11 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-6348-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Tue Jan 24 15:09:44 PST 2023 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: Jetson AGX Orin [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x808260518 SMBIOS=0xffff0000 SMBIOS 3.0=0x806c20000 MEMATTR=0x807611018 ESRT=0x8064eec98 RNG=0x82a9ff398 MEMRESERVE=0x807612f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000008064eec98 to 0x00000008064eecd0. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000081a800000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000837ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000803ffffff] [ 0.000000] node 0: [mem 0x0000000804000000-0x00000008061bffff] [ 0.000000] node 0: [mem 0x00000008061c0000-0x0000000806824fff] [ 0.000000] node 0: [mem 0x0000000806825000-0x00000008069a3fff] [ 0.000000] node 0: [mem 0x00000008069a4000-0x0000000806bcffff] [ 0.000000] node 0: [mem 0x0000000806bd0000-0x0000000806bdffff] [ 0.000000] node 0: [mem 0x0000000806be0000-0x0000000806c1ffff] [ 0.000000] node 0: [mem 0x0000000806c20000-0x0000000806c2ffff] [ 0.000000] node 0: [mem 0x0000000806c30000-0x0000000806dfffff] [ 0.000000] node 0: [mem 0x0000000806e00000-0x0000000806e4ffff] [ 0.000000] node 0: [mem 0x0000000806e50000-0x000000080751ffff] [ 0.000000] node 0: [mem 0x0000000807520000-0x000000080756ffff] [ 0.000000] node 0: [mem 0x0000000807570000-0x00000008075dffff] [ 0.000000] node 0: [mem 0x00000008075e0000-0x00000008075fffff] [ 0.000000] node 0: [mem 0x0000000807600000-0x000000080761ffff] [ 0.000000] node 0: [mem 0x0000000807620000-0x000000080763ffff] [ 0.000000] node 0: [mem 0x0000000807640000-0x000000080775ffff] [ 0.000000] node 0: [mem 0x0000000807760000-0x000000080793ffff] [ 0.000000] node 0: [mem 0x0000000807940000-0x000000080798ffff] [ 0.000000] node 0: [mem 0x0000000807990000-0x0000000807acffff] [ 0.000000] node 0: [mem 0x0000000807ad0000-0x0000000807b9ffff] [ 0.000000] node 0: [mem 0x0000000807ba0000-0x0000000807d7ffff] [ 0.000000] node 0: [mem 0x0000000807d80000-0x0000000807d9ffff] [ 0.000000] node 0: [mem 0x0000000807da0000-0x0000000807daffff] [ 0.000000] node 0: [mem 0x0000000807db0000-0x000000080838ffff] [ 0.000000] node 0: [mem 0x0000000808390000-0x000000080842ffff] [ 0.000000] node 0: [mem 0x0000000808430000-0x000000080852ffff] [ 0.000000] node 0: [mem 0x0000000808530000-0x00000008085cffff] [ 0.000000] node 0: [mem 0x00000008085d0000-0x00000008086cffff] [ 0.000000] node 0: [mem 0x00000008086d0000-0x000000080876ffff] [ 0.000000] node 0: [mem 0x0000000808770000-0x000000080903ffff] [ 0.000000] node 0: [mem 0x0000000809040000-0x000000080921ffff] [ 0.000000] node 0: [mem 0x0000000809220000-0x000000082a9affff] [ 0.000000] node 0: [mem 0x000000082a9b0000-0x000000082a9fffff] [ 0.000000] node 0: [mem 0x000000082aa00000-0x000000082e7fffff] [ 0.000000] node 0: [mem 0x000000082ea00000-0x000000082eefffff] [ 0.000000] node 0: [mem 0x0000000836000000-0x0000000837ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000837ffffff] [ 0.000000] On node 0, zone Normal: 256 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 7937792 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 console=tty0 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 nv-auto-config [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB) [ 0.000000] Memory: 31048588K/32257024K available (18432K kernel code, 3168K rwdata, 7164K rodata, 3968K init, 1110K bss, 946292K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000785] Console: colour dummy device 80x25 [ 0.000988] printk: console [tty0] enabled [ 0.001028] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001038] pid_max: default: 32768 minimum: 301 [ 0.001105] LSM: Security Framework initializing [ 0.001128] Yama: becoming mindful. [ 0.001148] SELinux: Initializing. [ 0.001244] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.001295] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.003341] rcu: Hierarchical SRCU implementation. [ 0.003443] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.004284] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/concord/kernel-dts/tegra234-p3701-0000-p3737-0000.dts [ 0.004294] DTB Build time: Jan 24 2023 15:26:09 [ 0.005728] Tegra Revision: A01 SKU: 0xd0 CPU Process: 0 SoC Process: 0 [ 0.005843] Remapping and enabling EFI services. [ 0.007058] smp: Bringing up secondary CPUs ... [ 0.035756] Detected PIPT I-cache on CPU1 [ 0.035796] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.035829] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.064469] Detected PIPT I-cache on CPU2 [ 0.064479] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.064492] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.093082] Detected PIPT I-cache on CPU3 [ 0.093090] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.093103] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.123760] Detected PIPT I-cache on CPU4 [ 0.123781] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [ 0.123808] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.152454] Detected PIPT I-cache on CPU5 [ 0.152463] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [ 0.152478] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.181094] Detected PIPT I-cache on CPU6 [ 0.181104] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [ 0.181119] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.209737] Detected PIPT I-cache on CPU7 [ 0.209747] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [ 0.209762] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.240422] Detected PIPT I-cache on CPU8 [ 0.240444] GICv3: CPU8: found redistributor 20000 region 0:0x000000000f540000 [ 0.240471] CPU8: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.269116] Detected PIPT I-cache on CPU9 [ 0.269127] GICv3: CPU9: found redistributor 20100 region 0:0x000000000f560000 [ 0.269142] CPU9: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.298366] Detected PIPT I-cache on CPU10 [ 0.298377] GICv3: CPU10: found redistributor 20200 region 0:0x000000000f580000 [ 0.298392] CPU10: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.327615] Detected PIPT I-cache on CPU11 [ 0.327625] GICv3: CPU11: found redistributor 20300 region 0:0x000000000f5a0000 [ 0.327639] CPU11: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.327696] smp: Brought up 1 node, 12 CPUs [ 0.327762] SMP: Total of 12 processors activated. [ 0.327767] CPU features: detected: Privileged Access Never [ 0.327771] CPU features: detected: LSE atomic instructions [ 0.327773] CPU features: detected: User Access Override [ 0.327776] CPU features: detected: 32-bit EL0 Support [ 0.327779] CPU features: detected: Common not Private translations [ 0.327782] CPU features: detected: RAS Extension Support [ 0.327785] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.327788] CPU features: detected: CRC32 instructions [ 0.327791] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.363720] CPU: All CPU(s) started at EL2 [ 0.366272] devtmpfs: initialized [ 0.383877] Registered cp15_barrier emulation handler [ 0.383891] Registered setend emulation handler [ 0.383897] KASLR enabled [ 0.384025] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.384040] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.385470] pinctrl core: initialized pinctrl subsystem [ 0.386033] SMBIOS 3.0.0 present. [ 0.386042] DMI: Unknown Jetson AGX Orin/Jetson AGX Orin, BIOS 2.1-32413640 01/24/2023 [ 0.386326] NET: Registered protocol family 16 [ 0.387173] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.387377] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.387573] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.387602] audit: initializing netlink subsys (disabled) [ 0.387690] audit: type=2000 audit(0.384:1): state=initialized audit_enabled=0 res=1 [ 0.387864] thermal_sys: Registered thermal governor 'step_wise' [ 0.387865] thermal_sys: Registered thermal governor 'power_allocator' [ 0.387871] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.390477] cpuidle: using governor menu [ 0.390587] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.390711] ASID allocator initialised with 32768 entries [ 0.390812] Serial: AMBA PL011 UART driver [ 0.392536] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.392563] Tegra reboot handler registered. [ 0.410915] mc: mapped MMIO address: 0xffff8000111f0000 -> 0x2c10000 [ 0.410932] mc: mapped MMIO address: 0xffff800011210000 -> 0x2c20000 [ 0.410942] mc: mapped MMIO address: 0xffff800011230000 -> 0x2c30000 [ 0.410950] mc: mapped MMIO address: 0xffff800011250000 -> 0x2c40000 [ 0.410958] mc: mapped MMIO address: 0xffff800011270000 -> 0x2c50000 [ 0.410968] mc: mapped MMIO address: 0xffff800011290000 -> 0x2b80000 [ 0.410976] mc: mapped MMIO address: 0xffff8000112b0000 -> 0x2b90000 [ 0.410983] mc: mapped MMIO address: 0xffff8000112d0000 -> 0x2ba0000 [ 0.410990] mc: mapped MMIO address: 0xffff8000112f0000 -> 0x2bb0000 [ 0.410999] mc: mapped MMIO address: 0xffff800011310000 -> 0x1700000 [ 0.411006] mc: mapped MMIO address: 0xffff800011330000 -> 0x1710000 [ 0.411013] mc: mapped MMIO address: 0xffff800011350000 -> 0x1720000 [ 0.411021] mc: mapped MMIO address: 0xffff800011370000 -> 0x1730000 [ 0.411028] mc: mapped MMIO address: 0xffff800011390000 -> 0x1740000 [ 0.411035] mc: mapped MMIO address: 0xffff8000113b0000 -> 0x1750000 [ 0.411042] mc: mapped MMIO address: 0xffff8000113d0000 -> 0x1760000 [ 0.411051] mc: mapped MMIO address: 0xffff8000113f0000 -> 0x1770000 [ 0.411064] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.411094] mc-err: mcerr ops are set to t23x [ 0.411751] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 67, base_baud = 0) is a SBSA [ 1.682726] printk: console [ttyAMA0] enabled [ 1.691097] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.697804] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 1.704505] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.711203] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.719705] ACPI: Interpreter disabled. [ 1.724755] vdd-av1v1-hub: supplied by vdd-5v-sys [ 1.729641] vbusA-cvb: supplied by vdd-5v-sys [ 1.734112] vbusB-cvb: supplied by vdd-5v-sys [ 1.738592] vdd-usbc1-vbus: supplied by vdd-5v-sys [ 1.743492] vdd-usbc2-vbus: supplied by vdd-5v-sys [ 1.748562] iommu: Default domain type: Translated [ 1.753481] eventlib_kernel: keventlib is initialized, test id: 0 [ 1.759747] SCSI subsystem initialized [ 1.763566] usbcore: registered new interface driver usbfs [ 1.769067] usbcore: registered new interface driver hub [ 1.774390] usbcore: registered new device driver usb [ 1.779620] mc: Linux media interface: v0.10 [ 1.783897] videodev: Linux video capture interface: v2.00 [ 1.789529] pps_core: LinuxPPS API ver. 1 registered [ 1.794492] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.803629] PTP clock support registered [ 1.807747] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 1.814914] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 1.822593] Registered efivars operations [ 1.827131] FPGA manager framework [ 1.830575] Advanced Linux Sound Architecture Driver Initialized. [ 1.836938] Bluetooth: Core ver 2.22 [ 1.840520] NET: Registered protocol family 31 [ 1.844963] Bluetooth: HCI device and connection manager initialized [ 1.851322] Bluetooth: HCI socket layer initialized [ 1.856200] Bluetooth: L2CAP socket layer initialized [ 1.861256] Bluetooth: SCO socket layer initialized [ 1.866639] camchar: rtcpu character device driver loaded [ 1.872267] clocksource: Switched to clocksource arch_sys_counter [ 2.032638] VFS: Disk quotas dquot_6.6.0 [ 2.036614] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.043649] pnp: PnP ACPI: disabled [ 2.049037] la/ptsa driver initialized. [ 2.052928] NET: Registered protocol family 2 [ 2.057485] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 2.067207] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 2.075953] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 2.084257] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 2.092190] TCP: Hash tables configured (established 262144 bind 65536) [ 2.098902] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 2.105834] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 2.113280] NET: Registered protocol family 1 [ 2.117900] RPC: Registered named UNIX socket transport module. [ 2.123834] RPC: Registered udp transport module. [ 2.128539] RPC: Registered tcp transport module. [ 2.133240] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.139694] PCI: CLS 0 bytes, default 64 [ 2.143742] Trying to unpack rootfs image as initramfs... [ 2.259733] Freeing initrd memory: 8208K [ 2.266034] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 2.273964] kvm [1]: IPA Size Limit: 48 bits [ 2.278400] kvm [1]: VHE mode initialized successfully [ 2.284294] Initialise system trusted keyrings [ 2.288876] workingset: timestamp_bits=46 max_order=23 bucket_order=0 [ 2.297472] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.303582] NFS: Registering the id_resolver key type [ 2.308648] Key type id_resolver registered [ 2.312828] Key type id_legacy registered [ 2.316864] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.323572] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.330976] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.346986] NET: Registered protocol family 38 [ 2.351433] Key type asymmetric registered [ 2.355530] Asymmetric key parser 'x509' registered [ 2.360424] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 2.367879] io scheduler mq-deadline registered [ 2.372410] io scheduler kyber registered [ 2.380337] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 2.385941] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 2.391527] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 2.397115] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 2.405245] tegra_dc_assign_hw_data: no matching compatible node [ 2.411254] tegradccommon module_init failed [ 2.415522] tegradc module_init failed [ 2.419524] EINJ: ACPI disabled. [ 2.424289] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 2.431169] tegra-pmc: ### PMC reset source: MAINSWRST [ 2.436307] tegra-pmc: ### PMC reset level: L1 [ 2.440747] tegra-pmc: ### PMC reset status reg: 0x2d [ 2.447042] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.459271] random: fast init done [ 2.459579] printk: console [ttyTCU0] enabled [ 4.117986] arm-smmu 12000000.iommu: probing hardware configuration... [ 4.125996] arm-smmu 12000000.iommu: SMMUv2 with: [ 4.130861] arm-smmu 12000000.iommu: stage 1 translation [ 4.136451] arm-smmu 12000000.iommu: stage 2 translation [ 4.141991] arm-smmu 12000000.iommu: nested translation [ 4.147445] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 4.154859] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 4.163812] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 4.170507] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.177198] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.184792] arm-smmu 10000000.iommu: probing hardware configuration... [ 4.191488] arm-smmu 10000000.iommu: SMMUv2 with: [ 4.196307] arm-smmu 10000000.iommu: stage 1 translation [ 4.201835] arm-smmu 10000000.iommu: stage 2 translation [ 4.207374] arm-smmu 10000000.iommu: nested translation [ 4.212828] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 4.220233] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 4.229097] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 4.235784] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.242478] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.249603] arm-smmu 8000000.iommu: probing hardware configuration... [ 4.256210] arm-smmu 8000000.iommu: SMMUv2 with: [ 4.260948] arm-smmu 8000000.iommu: stage 1 translation [ 4.266393] arm-smmu 8000000.iommu: stage 2 translation [ 4.271839] arm-smmu 8000000.iommu: nested translation [ 4.277189] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 4.284505] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 4.293269] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 4.299874] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.306479] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.313814] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 4.324231] tegra_profiler: version: 1.150, samples/io: 50/29 [ 4.330192] tegra_profiler: auth: init [ 4.334326] nvsciipc: loaded module [ 4.339423] tun: Universal TUN/TAP device driver, 1.6 [ 4.345051] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 4.352465] hns3: Copyright (c) 2017 Huawei Corporation. [ 4.357944] e1000e: Intel(R) PRO/1000 Network Driver [ 4.363036] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.369132] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.374673] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.380547] PPP generic driver version 2.4.2 [ 4.384998] PPP BSD Compression module registered [ 4.389832] PPP Deflate Compression module registered [ 4.395021] PPP MPPE Compression module registered [ 4.399959] usbcore: registered new interface driver r8152 [ 4.405600] usbcore: registered new interface driver asix [ 4.411144] usbcore: registered new interface driver ax88179_178a [ 4.417402] usbcore: registered new interface driver cdc_ether [ 4.423389] usbcore: registered new interface driver net1080 [ 4.429207] usbcore: registered new interface driver cdc_subset [ 4.435289] usbcore: registered new interface driver zaurus [ 4.441022] usbcore: registered new interface driver cdc_ncm [ 4.446831] usbcore: registered new interface driver aqc111 [ 4.452663] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.459024] ohci-pci: OHCI PCI platform driver [ 4.463600] ohci-platform: OHCI generic platform driver [ 4.469257] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 4.475671] usbcore: registered new interface driver uas [ 4.481143] usbcore: registered new interface driver usb-storage [ 4.487451] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 4.493572] mousedev: PS/2 mouse device common for all mice [ 4.499319] usbcore: registered new interface driver xpad [ 4.506742] tegra_rtc c2a0000.rtc: registered as rtc1 [ 4.512208] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:28 UTC (28) [ 4.520432] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.526833] i2c /dev entries driver [ 4.530512] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 4.536344] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 4.542015] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 4.547690] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 4.553366] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 4.559039] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 4.564715] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 4.570401] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 4.578450] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint. [ 4.587025] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint. [ 4.596484] device-mapper: uevent: version 1.0.3 [ 4.601323] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 4.611126] sdhci: Secure Digital Host Controller Interface driver [ 4.617464] sdhci: Copyright(c) Pierre Ossman [ 4.621932] Synopsys Designware Multimedia Card Interface Driver [ 4.628166] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.634118] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 4.634388] sdhci-tegra 3400000.sdhci: Adding to iommu group 4 [ 4.634828] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 4.635690] tegra-bpmp bpmp: firmware: 9a7bb16aee9be45a56e6-ccd7dae126b [ 4.637335] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 4.637871] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x81 [ 4.642511] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 4.675679] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful ÿâdebugfs initialized ÿá[ 5.880534] hid: raw HID events driver (C) Jiri Kosina [ 5.886297] usbcore: registered new interface driver usbhid [ 5.892040] usbhid: USB HID core driver [ 5.896504] tegra-dce d800000.dce: Adding to iommu group 5 [ 5.903444] dce: dce_ipc_channel_init:314 Invalid Channel State [0x0] for ch_type [2] [ 5.912539] tegra234-aon c000000.aon: Adding to iommu group 6 [ 5.918968] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 5.925436] c000000.aon:hsp: probed [ 5.927942] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [0]. Ignored... [ 5.940395] tegra234-aon c000000.aon: init done [ 5.940799] tegra23x-psc e860000.psc: Adding to iommu group 7 [ 5.945089] dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0] [ 5.951322] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 5.958474] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x1] [ 5.964312] tegra23x-psc e860000.psc: init done [ 5.964504] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 8 [ 5.973268] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [1] ... [ 5.973269] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored... [ 5.973286] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored... [ 5.978662] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 5.984543] dce: dce_admin_setup_clients_ipc:529 Get queue info failed for [2] [ 5.985125] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2] [ 6.000072] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 6.001733] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [3] ... [ 6.001735] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored... [ 6.001746] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored... [ 6.010573] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 6.019039] dce: dce_start_boot_flow:173 DCE_BOOT_DONE [ 6.026500] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 6.098318] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 6.110022] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 6.122604] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 6.135491] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 6.147544] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (117) [ 6.154383] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 6.164516] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 6.164523] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=10150ec03f8849d1537396903b70d4a48a255aba [ 6.185400] t19x_cache tegra-cache: probed [ 6.190003] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 6.209446] optee: probing for conduit method. [ 6.214040] optee: revision 3.19 (18d0f61b) [ 6.214721] optee: dynamic shared memory is enabled [ 6.224153] optee: initialized driver [ 6.241462] nvpmodel: initialized successfully [ 6.246138] tegra_hv: get_hvd: not initialized yet [ 6.251096] user_ivc_mempool: hypervisor not present [ 6.257036] usbcore: registered new interface driver snd-usb-audio [ 6.264323] u32 classifier [ 6.267128] input device check on [ 6.270910] Actions configured [ 6.274567] Initializing XFRM netlink socket [ 6.279379] NET: Registered protocol family 10 [ 6.285884] Segment Routing with IPv6 [ 6.289715] NET: Registered protocol family 17 [ 6.294313] NET: Registered protocol family 15 [ 6.298962] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 6.313149] Bluetooth: RFCOMM socket layer initialized [ 6.318476] Bluetooth: RFCOMM ver 1.11 [ 6.322355] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 6.328481] Bluetooth: HIDP socket layer initialized [ 6.334470] 9pnet: Installing 9P2000 support [ 6.338948] Key type dns_resolver registered [ 6.344412] registered taskstats version 1 [ 6.348664] Loading compiled-in X.509 certificates [ 6.359390] Loaded X.509 cert 'Build time autogenerated kernel key: d2e6b29ce3ba3f3d31103e414d71889f8474be7b' [ 6.369994] tegra194-pcie 14100000.pcie: Adding to iommu group 9 [ 6.382779] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.389946] tegra194-pcie 14160000.pcie: Adding to iommu group 10 [ 6.402211] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 6.409047] tegra194-pcie 141a0000.pcie: Adding to iommu group 11 [ 6.421024] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 6.453373] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 12 [ 6.463782] host1x 13e40000.host1x: Adding to iommu group 13 [ 7.481457] t23x_init_gating_regs: Timed out waiting for syncpt ram init! [ 7.499948] host1x 13e40000.host1x: initialized [ 7.504999] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 14 [ 7.513158] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000) [ 7.525192] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 15 [ 7.533281] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000) [ 7.545270] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 16 [ 7.553360] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000) [ 7.565350] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 17 [ 7.573441] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 7.585412] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 18 [ 7.593494] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 7.605448] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 19 [ 7.613521] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 7.625497] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 20 [ 7.633600] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 7.645591] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 21 [ 7.653687] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 7.665680] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 22 [ 7.673776] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000) [ 7.685783] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 23 [ 7.693892] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000) [ 7.705880] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 24 [ 7.713956] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000) [ 7.725964] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 25 [ 7.734041] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000) [ 7.746020] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 26 [ 7.754118] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000) [ 7.766084] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 27 [ 7.774206] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000) [ 7.786168] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 28 [ 7.794225] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000) [ 7.806214] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 29 [ 7.814291] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000) [ 7.826290] falcon 15340000.vic: Adding to iommu group 30 [ 7.841242] falcon 15340000.vic: initialized [ 7.845975] falcon 15380000.nvjpg: Adding to iommu group 31 [ 7.857283] falcon 15380000.nvjpg: initialized [ 7.861989] falcon 15540000.nvjpg1: Adding to iommu group 32 [ 7.873172] falcon 15540000.nvjpg1: initialized [ 7.877960] falcon 154c0000.nvenc: Adding to iommu group 33 [ 7.892382] falcon 154c0000.nvenc: initialized [ 7.897078] falcon 15a50000.ofa: Adding to iommu group 34 [ 7.908112] falcon 15a50000.ofa: initialized [ 7.912644] nvdec 15480000.nvdec: Adding to iommu group 35 [ 7.930445] nvdec 15480000.nvdec: initialized [ 7.935043] tsec 15500000.tsec: Adding to iommu group 36 [ 7.949790] tsec 15500000.tsec: initialized [ 7.956984] gic 2a41000.agic-controller: GIC IRQ controller registered [ 7.973657] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 7.988416] gpio-394 (camera-control-output-low): hogged as output/low [ 7.995179] gpio-397 (camera-control-output-low): hogged as output/low [ 8.001920] gpio-487 (camera-control-output-low): hogged as output/low [ 8.008679] gpio-486 (camera-control-output-low): hogged as output/low [ 8.016442] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 8.023674] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 8.030665] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 8.037189] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 8.043642] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 8.049845] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 8.058000] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 8.066583] tegra194-isp5 14800000.isp: Adding to iommu group 37 [ 8.076232] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 8.085880] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 8.092484] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 38 [ 8.100889] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 39 [ 8.108973] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 8.118934] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 8.125753] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 8.135680] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 8.142486] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 8.152432] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 8.159258] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 40 [ 8.168013] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000) [ 8.179400] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 41 [ 8.188147] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000) [ 8.199526] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 42 [ 8.208310] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000) [ 8.219666] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 43 [ 8.228401] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000) [ 8.239770] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 44 [ 8.248527] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000) [ 8.259934] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 45 [ 8.268676] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000) [ 8.280052] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 46 [ 8.288799] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000) [ 8.300172] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 47 [ 8.308908] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000) [ 8.320276] pva 16000000.pva0: Adding to iommu group 48 [ 8.346444] pva 16000000.pva0: initialized [ 8.358499] nvdla 15880000.nvdla0: Adding to iommu group 49 [ 8.373588] nvdla 15880000.nvdla0: initialized [ 8.379820] nvdla 158c0000.nvdla1: Adding to iommu group 50 [ 8.394830] nvdla 158c0000.nvdla1: initialized [ 8.401025] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 2 [ 8.408045] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 8.415554] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 8.422207] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 8.428973] serial-tegra 3100000.serial: Adding to iommu group 2 [ 8.435721] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 13, base_baud = 0) is a TEGRA_UART [ 8.445510] serial-tegra 3110000.serial: Adding to iommu group 2 [ 8.452070] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 65, base_baud = 0) is a TEGRA_UART [ 8.461718] serial-tegra 3130000.serial: Adding to iommu group 2 [ 8.468223] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 66, base_baud = 0) is a TEGRA_UART [ 8.497496] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release [ 8.507254] tegra-xusb 3610000.xhci: xHCI Host Controller [ 8.512866] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 8.521503] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 8.531116] tegra-xusb 3610000.xhci: irq 235, io mem 0x03610000 [ 8.537568] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 8.546078] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.553514] usb usb1: Product: xHCI Host Controller [ 8.558543] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 8.564832] usb usb1: SerialNumber: 3610000.xhci [ 8.570286] hub 1-0:1.0: USB hub found [ 8.574180] hub 1-0:1.0: 4 ports detected [ 8.578551] tegra-xusb 3610000.xhci: xHCI Host Controller [ 8.584119] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 8.591929] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 8.599444] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 8.607961] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.615412] usb usb2: Product: xHCI Host Controller [ 8.620426] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 8.626709] usb usb2: SerialNumber: 3610000.xhci [ 8.631935] hub 2-0:1.0: USB hub found [ 8.635819] hub 2-0:1.0: 4 ports detected [ 8.650511] random: crng init done [ 8.662643] tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event probing [ 8.685732] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 2010000 KHz, changing to: 2035200 KHz [ 8.697378] cpufreq: cpu0,cur:1909000,set:2035200,set ndiv:159 [ 8.705239] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2017000 KHz, changing to: 2035200 KHz [ 8.719477] cpufreq: cpufreq_online: CPU8: Running at unlisted initial frequency: 2015000 KHz, changing to: 2035200 KHz [ 8.732304] tegra194-cpufreq e000000.ccplex: probed with ICC [ 8.740524] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 8.742101] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 8.747701] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 8.749533] mmc0: CQHCI version 5.10 [ 8.761082] irq: IRQ302: trimming hierarchy from :interrupt-controller@f400000-1 [ 8.762786] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 8.770437] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 302 [ 8.776976] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 8.779077] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 8.802172] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 8.840265] usb 1-3: new full-speed USB device number 2 using tegra-xusb [ 8.869791] mmc0: Command Queue Engine enabled [ 8.874362] mmc0: periodic cache flush enabled [ 8.878927] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 8.885809] mmcblk0: mmc0:0001 G1M15M 59.3 GiB [ 8.890665] mmcblk0rpmb: mmc0:0001 G1M15M partition 3 4.00 MiB, chardev (511:0) [ 8.910043] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 8.916264] tegra194-pcie 14100000.pcie: Link up [ 8.922349] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 8.929161] pci_bus 0001:00: root bus resource [bus 00-ff] [ 8.934796] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 8.944645] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 8.955472] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 8.963404] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 8.969765] pci 0001:00:00.0: PME# supported from D0 D3hot [ 8.979920] pci 0001:01:00.0: [10ec:c822] type 00 class 0x028000 [ 8.986256] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 8.992188] pci 0001:01:00.0: reg 0x18: [mem 0x20a8000000-0x20a800ffff 64bit] [ 9.000624] pci 0001:01:00.0: supports D1 D2 [ 9.005018] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 9.008679] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 9.016251] pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff] [ 9.020239] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.020242] usb 1-3: Product: Bluetooth Radio [ 9.027686] pci 0001:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 9.027690] pci 0001:01:00.0: BAR 2: assigned [mem 0x20a8000000-0x20a800ffff 64bit] [ 9.035033] usb 1-3: Manufacturer: Realtek [ 9.039615] pci 0001:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 9.045879] usb 1-3: SerialNumber: 00e04c000001 [ 9.068950] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 9.074324] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff] [ 9.080610] pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a80fffff] [ 9.087966] pci 0001:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 9.096725] pci 0001:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 9.105687] pcieport 0001:00:00.0: Adding to iommu group 9 [ 9.111580] pcieport 0001:00:00.0: PME: Signaling with IRQ 51 [ 9.117729] pcieport 0001:00:00.0: AER: enabled with IRQ 51 [ 9.124311] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 9.131748] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 9.133323] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 9.138927] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 9.155405] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 9.164094] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 9.183300] usb 2-3: New USB device found, idVendor=0bda, idProduct=0420, bcdDevice= 1.40 [ 9.191722] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.199065] usb 2-3: Product: 4-Port USB 3.0 Hub [ 9.203812] usb 2-3: Manufacturer: Generic [ 9.218547] hub 2-3:1.0: USB hub found [ 9.224596] hub 2-3:1.0: 4 ports detected [ 9.300264] usb 1-4: new high-speed USB device number 3 using tegra-xusb [ 9.476537] usb 1-4: New USB device found, idVendor=0bda, idProduct=5420, bcdDevice= 1.40 [ 9.484953] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.492291] usb 1-4: Product: 4-Port USB 2.0 Hub [ 9.497037] usb 1-4: Manufacturer: Generic [ 9.503186] hub 1-4:1.0: USB hub found [ 9.508388] hub 1-4:1.0: 4 ports detected [ 10.281877] tegra194-pcie 14160000.pcie: Phy link never came up [ 10.288033] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 10.294853] pci_bus 0004:00: root bus resource [bus 00-ff] [ 10.300484] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 10.310589] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 10.321419] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 10.329338] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 10.335669] pci 0004:00:00.0: PME# supported from D0 D3hot [ 10.349018] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 10.354411] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 10.363358] pcieport 0004:00:00.0: Adding to iommu group 10 [ 10.369321] pcieport 0004:00:00.0: PME: Signaling with IRQ 53 [ 10.375593] pcieport 0004:00:00.0: AER: enabled with IRQ 53 [ 10.381554] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 10.387634] pci 0004:00:00.0: Removing from iommu group 10 [ 10.393276] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 10.400705] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 10.407338] vdd-3v3-pcie: supplied by vdd-3v3-sys [ 10.412395] avdd-cam-2v8: supplied by vdd-3v3-sys [ 10.417326] vdd-dp: supplied by vdd-3v3-sys [ 10.421778] vdd-3v3-sd: supplied by vdd-3v3-sys [ 10.426716] dsi-vdd-1v8-bl-en: supplied by vdd-1v8-sys [ 10.434138] tegra194-isp5 14800000.isp: initialized [ 10.450716] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 10.457163] (NULL device *): fops function table already registered [ 10.464566] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 10.471466] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 10.471614] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 10.493293] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 302 [ 10.585811] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 10.592993] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 10.601685] tegra194-pcie 141a0000.pcie: MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000 [ 10.610366] tegra194-pcie 141a0000.pcie: MEM 0x2740000000..0x2b27ffffff -> 0x2740000000 [ 11.236405] [RCE] WARNING: core/hsp/hsp-vm.c:283 [camrtc_hsp_full_ss_isr] "VM0 issued IVC in inactive state." [ 11.246600] [RCE] WARNING: core/hsp/hsp-vm.c:283 [camrtc_hsp_full_ss_isr] "VM0 issued IVC in inactive state." [ 11.256785] [RCE] WARNING: core/hsp/hsp-vm.c:283 [camrtc_hsp_full_ss_isr] "VM0 issued IVC in inactive state." [ 11.266971] [RCE] WARNING: core/hsp/hsp-vm.c:283 [camrtc_hsp_full_ss_isr] "VM0 issued IVC in inactive state." [ 11.277171] [RCE] WARNING: core/hsp/hsp-vm.c:283 [camrtc_hsp_full_ss_isr] "VM0 issued IVC in inactive state." [ 11.535448] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 11.725604] tegra194-pcie 141a0000.pcie: Phy link never came up [ 11.731782] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 11.738602] pci_bus 0005:00: root bus resource [bus 00-ff] [ 11.744233] pci_bus 0005:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3a100000-0x3a1fffff]) [ 11.754348] pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff] (bus address [0x40000000-0x47ffffff]) [ 11.765183] pci_bus 0005:00: root bus resource [mem 0x2740000000-0x2b27ffffff pref] [ 11.773105] pci 0005:00:00.0: [10de:229a] type 01 class 0x060400 [ 11.779431] pci 0005:00:00.0: PME# supported from D0 D3hot [ 11.792911] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 11.798305] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 11.807259] pcieport 0005:00:00.0: Adding to iommu group 11 [ 11.813238] pcieport 0005:00:00.0: PME: Signaling with IRQ 55 [ 11.819508] pcieport 0005:00:00.0: AER: enabled with IRQ 55 [ 11.825448] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 11.831518] pci 0005:00:00.0: Removing from iommu group 11 [ 11.837163] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 11.845052] nvethernet 6810000.ethernet: Adding to iommu group 51 [ 11.851671] nvethernet 6810000.ethernet: failed to read skip mac reset flag, default 0 [ 11.859832] nvethernet 6810000.ethernet: failed to read MDIO address [ 11.866375] nvethernet 6810000.ethernet: setting to default DMA bit mask [ 11.873288] nvethernet 6810000.ethernet: Failed to read DMA Tx ring size, using default [4096] [ 11.882150] nvethernet 6810000.ethernet: Failed to read DMA Tx ring size, using default [4096] [ 11.891008] nvethernet 6810000.ethernet: failed to read UPHY GBE mode- default to 10G [ 12.285412] nvethernet 6810000.ethernet: Ethernet MAC address: 48:b0:2d:a4:b5:60 [ 12.293397] nvethernet 6810000.ethernet: Macsec not enabled [ 12.299129] nvethernet 6810000.ethernet: Macsec: Reduced MTU: 1466 Max: 16383 [ 12.308410] nvethernet 6810000.ethernet: eth0 (HW ver: 31) created with 10 DMA channels [ 12.317105] irq: IRQ304: trimming hierarchy from :pmc@c360000 [ 12.323074] irq: IRQ305: trimming hierarchy from :interrupt-controller@f400000-1 [ 12.330748] irq: IRQ306: trimming hierarchy from :pmc@c360000 [ 12.336733] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 12.344708] tegra-se-nvhost 15810000.se: Adding to iommu group 52 [ 12.351344] tegra-se-nvhost 15810000.se: initialized [ 12.367603] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 12.373989] tegra-se-nvhost 15820000.se: Adding to iommu group 53 [ 12.380548] tegra-se-nvhost 15820000.se: initialized [ 12.386703] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 12.393078] tegra-se-nvhost 15840000.se: Adding to iommu group 54 [ 12.399650] tegra-se-nvhost 15840000.se: initialized [ 12.405798] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 12.412632] tegra_actmon d230000.actmon: in actmon_register()... [ 12.418953] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 12.424968] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 12.433348] hvc_sysfs: hypervisor is not present ÿâWARNING: clock_disable: clk_power_ungate on gated domain 35 for gpusysclk WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc1clk WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc0clk ÿá[ 12.569925] ALSA device list: [ 12.572974] No soundcards found. [ 12.577061] Freeing unused kernel memory: 3968K [ 12.581792] Run /init as init process [ 12.597384] Root device found: mmcblk0p1 [ 12.601891] Found dev node: /dev/mmcblk0p1 [ 12.636407] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 12.645532] Rootfs mounted over mmcblk0p1 [ 12.665490] Switching from initrd to actual rootfs [ 12.773302] systemd[1]: System time before build time, advancing clock. [ 12.819963] systemd[1]: systemd 245.4-4ubuntu3.19 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 12.843659] systemd[1]: Detected architecture arm64. [ 12.899585] systemd[1]: No hostname configured. [ 12.904263] systemd[1]: Set hostname to . [ 14.027124] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 14.040156] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 14.049755] systemd[1]: Created slice system-modprobe.slice. [ 14.055929] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 14.065681] systemd[1]: Reached target Slices. [ 14.070298] systemd[1]: Reached target Swap. [ 14.074958] systemd[1]: Listening on RPCbind Server Activation Socket. [ 14.081858] systemd[1]: Listening on fsck to fsckd communication Socket. [ 14.088845] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 14.095804] systemd[1]: Listening on Journal Audit Socket. [ 14.101590] systemd[1]: Listening on Journal Socket (/dev/log). [ 14.107844] systemd[1]: Listening on Journal Socket. [ 14.113097] systemd[1]: Listening on udev Control Socket. [ 14.118772] systemd[1]: Listening on udev Kernel Socket. [ 14.125196] systemd[1]: Mounting Huge Pages File System... [ 14.131795] systemd[1]: Mounting POSIX Message Queue File System... [ 14.139269] systemd[1]: Mounting Kernel Debug File System... [ 14.145989] systemd[1]: Mounting Kernel Trace File System... [ 14.152966] systemd[1]: Starting Journal Service... [ 14.158891] systemd[1]: Starting Set the console keyboard layout... [ 14.166330] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 14.176025] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 14.183983] systemd[1]: Starting Load Kernel Module efi_pstore... [ 14.191277] systemd[1]: Starting Load Kernel Module pstore_blk... [ 14.198528] systemd[1]: Starting Load Kernel Module pstore_zone... [ 14.205922] systemd[1]: Starting Load Kernel Module ramoops... [ 14.212915] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 14.220929] systemd[1]: Started Nameserver information manager. [ 14.227294] systemd[1]: Reached target Network (Pre). [ 14.233494] systemd[1]: Starting Set console scheme... [ 14.239476] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 14.248859] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 14.265804] systemd[1]: Starting Load Kernel Modules... [ 14.272094] systemd[1]: Starting Remount Root and Kernel File Systems... [ 14.279854] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 14.279890] systemd[1]: Starting udev Coldplug all Devices... [ 14.280130] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 14.280343] tegra-carveouts tegra-carveouts: fsi :dma coherent mem declare 0x0000000833000000,16777216 [ 14.280345] tegra-carveouts tegra-carveouts: assigned reserved memory node fsi-carveout [ 14.280351] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x0000000849800000,914358272 [ 14.280352] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 14.280356] nvmap_page_pool_init: Total RAM pages: 7830727 [ 14.280357] nvmap_page_pool_init: nvmap page pool size: 978840 pages (3823 MB) [ 14.280408] nvmap_background_zero_thread: PP zeroing thread starting. [ 14.280494] misc nvmap: created heap vpr base 0x0000000849800000 size (892928KiB) [ 14.283497] misc nvmap: created heap fsi base 0x0000000833000000 size (16384KiB) [ 14.350468] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 14.350468] [ 14.384843] systemd[1]: Started Journal Service. [ 14.413920] systemd-journald[301]: Received client request to flush runtime journal. [ 14.894485] Unable to handle kernel paging request at virtual address 65cc60229e9fbe15 [ 14.902647] Mem abort info: [ 14.905524] ESR = 0x96000004 [ 14.908669] EC = 0x25: DABT (current EL), IL = 32 bits [ 14.914132] SET = 0, FnV = 0 [ 14.917260] EA = 0, S1PTW = 0 [ 14.920475] Data abort info: [ 14.923421] ISV = 0, ISS = 0x00000004 [ 14.927359] CM = 0, WnR = 0 [ 14.930403] [65cc60229e9fbe15] address between user and kernel address ranges [ 14.937750] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 14.943484] Modules linked in: ina3221 pwm_fan nvgpu nvmap ip_tables x_tables [ 14.950830] CPU: 1 PID: 218 Comm: kworker/1:1H Not tainted 5.10.104-tegra #1 [ 14.958060] Hardware name: Unknown Jetson AGX Orin/Jetson AGX Orin, BIOS 2.1-32413640 01/24/2023 [ 14.967091] Workqueue: 0x0 (kblockd) [ 14.970849] pstate: 60c00089 (nZCv daIf +PAN +UAO -TCO BTYPE=--) [ 14.977030] pc : process_one_work+0xa4/0x4a0 [ 14.981418] lr : process_one_work+0x28/0x4a0 [ 14.985801] sp : ffff80001423bda0 [ 14.989196] x29: ffff80001423bda0 x28: ffffad6e9f766000 [ 14.994654] x27: ffff80001041bca8 x26: ffff0516870b0148 [ 15.000111] x25: ffffad6e9fa84828 x24: ffff051687100000 [ 15.005574] x23: 0000000000000000 x22: ffff051daebc7300 [ 15.011031] x21: ffff051daebc0a40 x20: ffff0516870f5300 [ 15.016488] x19: ffff051686fef040 x18: 0000000000000000 [ 15.021950] x17: 0000000000000000 x16: 0000000000000000 [ 15.027404] x15: 0000000000000000 x14: ffff0516899d1638 [ 15.032861] x13: ffff0516899d1638 x12: 000fffffffffffff [ 15.038314] x11: 0000000000000040 x10: 0000000000000a80 [ 15.043767] x9 : ffff80001423bd20 x8 : ffff051687100ae0 [ 15.049223] x7 : 0000078017408398 x6 : 0000000000000000 [ 15.054680] x5 : 00000000410fd420 x4 : 65cc60229e9fbe05 [ 15.060136] x3 : ffff051daebc0a40 x2 : 65cc60229e9fbe05 [ 15.065588] x1 : ffff051daebc0b90 x0 : 000000000000002a [ 15.071047] Call trace: [ 15.073558] process_one_work+0xa4/0x4a0 [ 15.077594] worker_thread+0x54/0x430 [ 15.081356] kthread+0x148/0x170 [ 15.084668] ret_from_fork+0x10/0x24 [ 15.088341] Code: aa0403e2 14000003 f9400042 b4000342 (f9400841) [ 15.094632] ---[ end trace 279c1231af26450f ]--- [ 15.099370] Kernel panic - not syncing: Oops: Fatal exception [ 15.105268] SMP: stopping secondary CPUs [ 16.135711] SMP: failed to stop secondary CPUs 0-1 [ 16.140636] Kernel Offset: 0x2d6e8da60000 from 0xffff800010000000 [ 16.146887] PHYS_OFFSET: 0xfffffaea80000000 [ 16.151179] CPU features: 0x0040006,4a80aa38 [ 16.155564] Memory Limit: none [ 16.158694] ---[ end Kernel panic - not syncing: Oops: Fatal exception ]---