[0032.769] I> MB1 (version: 0.28.0.0-t234-54845784-ec016368) [0032.774] I> t234-A01-0-Silicon (0x12347) Prod [0032.779] I> Boot-mode : BPMP Diagnostic [0032.782] I> Emulation: [0032.785] I> Entry timestamp: 0x00000000 [0032.788] I> last_boot_error: 0x0 [0032.792] I> BR-BCT: preprod_dev_sign: 0 [0032.795] I> rst_source: 0x0, rst_level: 0x0 [0032.799] I> Task: Initialize MB2 params (0x5000d78d) [0032.805] I> MB2-params @ 0x40060000 [0032.808] I> Task: Crypto init (0x5001cb8d) [0032.812] I> Task: Secure debug controls (0x5000cd21) [0032.817] I> Task: strap war set (0x5000c70d) [0032.822] I> strap value(0x4000001) set to 0x4000001 [0032.826] I> Task: Program NV master stream id (0x5000ccd5) [0032.832] I> Task: Verify boot mode (0xd482021) [0032.838] I> Task: Alias fuses (0x500109cd) [0032.842] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0032.849] I> Task: Print SKU type (0x5000fee1) [0032.853] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0032.859] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0032.863] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0032.867] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0032.871] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0032.876] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0032.880] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0032.884] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0032.888] I> FUSE_SKU_INFO_0 = 0xd3 [0032.891] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0032.896] I> FUSE_PACKAGE_INFO_0 = 0x2 [0032.899] I> SKU: Prod [0032.901] I> Task: Boost clocks (0x5001462d) [0032.905] I> Initializing PLLC2 for AXI_CBB. [0032.910] I> AXI_CBB : src = 35, divisor = 0 [0032.914] I> Task: Voltage monitor (0x50014639) [0032.918] I> VMON: Vmon re-calibration and fine tuning done [0032.924] I> Task: UPHY init (0x5000dced) [0032.928] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0032.933] I> Task: Boot device init (0x50000b39) [0032.938] I> Boot_device: RCM [0032.941] I> USB configuration success [0032.978] I> Task: TSC init (0x5001fa6d) [0032.982] I> Task: Enable WDT 5th expiry (0x50020699) [0032.987] I> Task: I2C register (0x50000ad9) [0032.991] I> Task: Reset FSI (0x50014635) [0032.995] I> Task: Enable clock-mon (0x5001fa5d) [0033.000] I> FMON: Fmon re-programming done [0033.004] I> Task: MB1 fixed firewalls (0x5001f0d9) [0033.013] I> Task: Load MB2/Applet/FSKP (0x5000d691) [0033.018] I> Loading MB2 Applet [0033.021] I> Active chain: 0 [0033.024] I> Slot: 0 [0033.026] I> Binary[21] block-0 (partition size: 0x50000) [0033.031] I> get_binary_info: Binary name: MB2-Applet [0033.036] I> Size of crypto header is 8192 [0033.040] I> BCH load address is : 0x4004e000 [0033.044] I> Size of crypto header is 8192 [0033.203] I> BCH of MB2-Applet read from storage [0033.208] I> BCH address is : 0x4004e000 [0033.212] I> MB2-Applet header integrity check is success [0033.217] I> Binary magic in BCH component 0 is MB2A [0033.222] I> component binary type is 21 [0033.226] I> Size of crypto header is 8192 [0033.239] I> MB2-Applet binary is read from storage [0033.245] I> MB2-Applet binary integrity check is success [0033.250] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b40) [0033.257] I> Task: Map CCPLEX SHARED carveout (0x5000d835) [0033.262] I> Task: Prepare MB2 params (0x5000d8f1) [0033.267] I> BR-BCT Boot Chain Fields [0033.271] I> u32_non_gpio_select_boot_chain : 0 [0033.275] I> u32_num_boot_chains : 0 [0033.280] I> bf_bl_gpio_select_boot_chain_1b : 0 [0033.285] I> Task: Misc NV security settings (0x5000d0f9) [0033.290] I> NVDEC sticky bits programming done [0033.294] I> Successfully powergated NVDEC [0033.298] I> Task: Disable/Reload WDT (0x500206e1) [0033.303] I> Programmed SLCG global override := 0x0 [0033.308] I> MB1: MSS reconfig completed I> Applet (version: 0.0.0.0-t234-54845784-80607037) I> t234-A01-0-Silicon (0x12347) I> Emulation: I> Entry timestamp: 0xffffffff I> Task: Pinmux init (0x4000062d) I> Task: Boot device init (0x400012e5) I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI-0l initialized successfully E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> Failed to open sdmmc-3, err = 39390706 W> Ignoring init failure for device 0-3 E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> Failed to open sdmmc-3, err = 39390706 W> Ignoring init failure for device 1-3 E> Unknown device 7 E> Unknown device 8 I> Task: Partition Manager Init (0x40002d25) I> Found 57 partitions in QSPI_FLASH (instance 0) I> Task: I2C register (0x400006a5) I> Task: Register exit handlers (0x400005f5) I> Task: Enter 3p server (0x400018e9) I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000001 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> Rebooting : reboot-recovery �� [0269.522] I> MB1 (version: 0.28.0.0-t234-54845784-ec016368) [0269.528] I> t234-A01-0-Silicon (0x12347) Prod [0269.532] I> Boot-mode : BPMP Diagnostic [0269.536] I> Emulation: [0269.538] I> Entry timestamp: 0x00000000 [0269.542] I> last_boot_error: 0x0 [0269.545] I> BR-BCT: preprod_dev_sign: 0 [0269.549] I> rst_source: 0xb, rst_level: 0x1 [0269.553] I> Task: Initialize MB2 params (0x5000d78d) [0269.558] I> MB2-params @ 0x40060000 [0269.562] I> Task: Crypto init (0x5001cb8d) [0269.566] I> Task: Secure debug controls (0x5000cd21) [0269.571] I> Task: strap war set (0x5000c70d) [0269.575] I> strap value(0x4000001) set to 0x4000001 [0269.580] I> Task: Program NV master stream id (0x5000ccd5) [0269.585] I> Task: Verify boot mode (0xd482021) [0269.591] I> Task: Alias fuses (0x500109cd) [0269.596] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0269.603] I> Task: Print SKU type (0x5000fee1) [0269.607] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0269.612] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0269.617] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0269.621] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0269.625] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0269.629] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0269.634] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0269.638] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0269.642] I> FUSE_SKU_INFO_0 = 0xd3 [0269.645] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0269.649] I> FUSE_PACKAGE_INFO_0 = 0x2 [0269.653] I> SKU: Prod [0269.655] I> Task: Boost clocks (0x5001462d) [0269.659] I> Initializing PLLC2 for AXI_CBB. [0269.663] I> AXI_CBB : src = 35, divisor = 0 [0269.668] I> Task: Voltage monitor (0x50014639) [0269.672] I> VMON: Vmon re-calibration and fine tuning done [0269.677] I> Task: UPHY init (0x5000dced) [0269.682] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0269.687] I> Task: Boot device init (0x50000b39) [0269.692] I> Boot_device: RCM [0269.695] I> USB configuration success [0269.772] I> Task: TSC init (0x5001fa6d) [0269.776] I> Task: Enable WDT 5th expiry (0x50020699) [0269.781] I> Task: I2C register (0x50000ad9) [0269.785] I> Task: Reset FSI (0x50014635) [0269.789] I> Task: Enable clock-mon (0x5001fa5d) [0269.794] I> FMON: Fmon re-programming done [0269.798] I> Task: MB1 fixed firewalls (0x5001f0d9) [0269.807] I> Task: Load MB2/Applet/FSKP (0x5000d691) [0269.812] I> Loading MB2 Applet [0269.815] I> Active chain: 0 [0269.818] I> Slot: 0 [0269.820] I> Binary[21] block-0 (partition size: 0x50000) [0269.825] I> get_binary_info: Binary name: MB2-Applet [0269.830] I> Size of crypto header is 8192 [0269.834] I> BCH load address is : 0x4004e000 [0269.838] I> Size of crypto header is 8192 [0269.993] I> BCH of MB2-Applet read from storage [0269.997] I> BCH address is : 0x4004e000 [0270.001] I> MB2-Applet header integrity check is success [0270.007] I> Binary magic in BCH component 0 is MB2A [0270.011] I> component binary type is 21 [0270.015] I> Size of crypto header is 8192 [0270.026] I> MB2-Applet binary is read from storage [0270.031] I> MB2-Applet binary integrity check is success [0270.037] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b40) [0270.043] I> Task: Map CCPLEX SHARED carveout (0x5000d835) [0270.049] I> Task: Prepare MB2 params (0x5000d8f1) [0270.054] I> BR-BCT Boot Chain Fields [0270.057] I> u32_non_gpio_select_boot_chain : 0 [0270.062] I> u32_num_boot_chains : 0 [0270.067] I> bf_bl_gpio_select_boot_chain_1b : 0 [0270.071] I> Task: Misc NV security settings (0x5000d0f9) [0270.077] I> NVDEC sticky bits programming done [0270.081] I> Successfully powergated NVDEC [0270.085] I> Task: Disable/Reload WDT (0x500206e1) [0270.090] I> Programmed SLCG global override := 0x0 [0270.094] I> MB1: MSS reconfig completed I> Applet (version: 0.0.0.0-t234-54845784-80607037) I> t234-A01-0-Silicon (0x12347) I> Emulation: I> Entry timestamp: 0xffffffff I> Task: Pinmux init (0x4000062d) I> Task: Boot device init (0x400012e5) I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI-0l initialized successfully E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> Failed to open sdmmc-3, err = 39390706 W> Ignoring init failure for device 0-3 E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> Failed to open sdmmc-3, err = 39390706 W> Ignoring init failure for device 1-3 E> Unknown device 7 E> Unknown device 8 I> Task: Partition Manager Init (0x40002d25) I> Found 57 partitions in QSPI_FLASH (instance 0) I> Task: I2C register (0x400006a5) I> Task: Register exit handlers (0x400005f5) I> Task: Enter 3p server (0x400018e9) I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000001 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> Rebooting : reboot-recovery �� [0485.776] I> MB1 (version: 0.28.0.0-t234-54845784-ec016368) [0485.781] I> t234-A01-0-Silicon (0x12347) Prod [0485.786] I> Boot-mode : BPMP Diagnostic [0485.789] I> Emulation: [0485.792] I> Entry timestamp: 0x00000000 [0485.796] I> last_boot_error: 0x0 [0485.799] I> BR-BCT: preprod_dev_sign: 0 [0485.802] I> rst_source: 0xb, rst_level: 0x1 [0485.807] I> Task: Initialize MB2 params (0x5000d78d) [0485.812] I> MB2-params @ 0x40060000 [0485.815] I> Task: Crypto init (0x5001cb8d) [0485.819] I> Task: Secure debug controls (0x5000cd21) [0485.824] I> Task: strap war set (0x5000c70d) [0485.829] I> strap value(0x4000001) set to 0x4000001 [0485.833] I> Task: Program NV master stream id (0x5000ccd5) [0485.839] I> Task: Verify boot mode (0xd482021) [0485.845] I> Task: Alias fuses (0x500109cd) [0485.849] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0485.856] I> Task: Print SKU type (0x5000fee1) [0485.861] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0485.866] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0485.870] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0485.874] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0485.879] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0485.883] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0485.887] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0485.891] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0485.895] I> FUSE_SKU_INFO_0 = 0xd3 [0485.899] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0485.903] I> FUSE_PACKAGE_INFO_0 = 0x2 [0485.906] I> SKU: Prod [0485.909] I> Task: Boost clocks (0x5001462d) [0485.913] I> Initializing PLLC2 for AXI_CBB. [0485.917] I> AXI_CBB : src = 35, divisor = 0 [0485.921] I> Task: Voltage monitor (0x50014639) [0485.925] I> VMON: Vmon re-calibration and fine tuning done [0485.931] I> Task: UPHY init (0x5000dced) [0485.935] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0485.940] I> Task: Boot device init (0x50000b39) [0485.945] I> Boot_device: RCM [0485.948] I> USB configuration success [0485.952] I> Task: TSC init (0x5001fa6d) [0485.956] I> Task: Enable WDT 5th expiry (0x50020699) [0485.961] I> Task: I2C register (0x50000ad9) [0485.965] I> Task: Reset FSI (0x50014635) [0485.968] I> Task: Enable clock-mon (0x5001fa5d) [0485.974] I> FMON: Fmon re-programming done [0485.978] I> Task: MB1 fixed firewalls (0x5001f0d9) [0485.987] I> Task: Load MB2/Applet/FSKP (0x5000d691) [0485.991] I> Loading MB2 Applet [0485.994] I> Active chain: 0 [0485.997] I> Slot: 0 [0485.999] I> Binary[21] block-0 (partition size: 0x50000) [0486.004] I> get_binary_info: Binary name: MB2-Applet [0486.009] I> Size of crypto header is 8192 [0486.013] I> BCH load address is : 0x4004e000 [0486.018] I> Size of crypto header is 8192 [0486.140] I> BCH of MB2-Applet read from storage [0486.145] I> BCH address is : 0x4004e000 [0486.149] I> MB2-Applet header integrity check is success [0486.154] I> Binary magic in BCH component 0 is MB2A [0486.159] I> component binary type is 21 [0486.163] I> Size of crypto header is 8192 [0486.175] I> MB2-Applet binary is read from storage [0486.181] I> MB2-Applet binary integrity check is success [0486.186] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b40) [0486.193] I> Task: Map CCPLEX SHARED carveout (0x5000d835) [0486.198] I> Task: Prepare MB2 params (0x5000d8f1) [0486.203] I> BR-BCT Boot Chain Fields [0486.206] I> u32_non_gpio_select_boot_chain : 0 [0486.211] I> u32_num_boot_chains : 0 [0486.216] I> bf_bl_gpio_select_boot_chain_1b : 0 [0486.220] I> Task: Misc NV security settings (0x5000d0f9) [0486.226] I> NVDEC sticky bits programming done [0486.230] I> Successfully powergated NVDEC [0486.234] I> Task: Disable/Reload WDT (0x500206e1) [0486.239] I> Programmed SLCG global override := 0x0 [0486.244] I> MB1: MSS reconfig completed I> Applet (version: 0.0.0.0-t234-54845784-80607037) I> t234-A01-0-Silicon (0x12347) I> Emulation: I> Entry timestamp: 0xffffffff I> Task: Pinmux init (0x4000062d) I> Task: Boot device init (0x400012e5) I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI-0l initialized successfully E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> Failed to open sdmmc-3, err = 39390706 W> Ignoring init failure for device 0-3 E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> Failed to open sdmmc-3, err = 39390706 W> Ignoring init failure for device 1-3 E> Unknown device 7 E> Unknown device 8 I> Task: Partition Manager Init (0x40002d25) I> Found 57 partitions in QSPI_FLASH (instance 0) I> Task: I2C register (0x400006a5) I> Task: Register exit handlers (0x400005f5) I> Task: Enter 3p server (0x400018e9) I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000001 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> Rebooting : reboot-recovery �� [0038.291] I> MB1 (version: 0.28.0.0-t234-54845784-ec016368) [0038.297] I> t234-A01-0-Silicon (0x12347) Prod [0038.301] I> Boot-mode : Coldboot [0038.304] I> Emulation: [0038.306] I> Entry timestamp: 0x00000000 [0038.310] I> last_boot_error: 0x0 [0038.313] I> BR-BCT: preprod_dev_sign: 0 [0038.317] I> rst_source: 0xb, rst_level: 0x1 [0038.321] I> Task: Bootchain select WAR set (0x5000c741) [0038.326] I> Active chain: 0 [0038.329] I> Task: CRC check (0x5001dab5) [0038.333] I> Task: Initialize MB2 params (0x5000d78d) [0038.338] I> MB2-params @ 0x40060000 [0038.342] I> Task: Crypto init (0x5001cb8d) [0038.346] I> Task: Secure debug controls (0x5000cd21) [0038.351] I> Task: strap war set (0x5000c70d) [0038.355] I> strap value(0x4000001) set to 0x4000001 [0038.360] I> Task: Initialize SOC Therm (0x5001af85) [0038.365] I> Task: Program NV master stream id (0x5000ccd5) [0038.370] I> Task: Verify boot mode (0xd482021) [0038.376] I> Task: Alias fuses (0x500109cd) [0038.381] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0038.388] I> Task: Print SKU type (0x5000fee1) [0038.392] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0038.397] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0038.402] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0038.406] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0038.410] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0038.414] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0038.419] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0038.423] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0038.427] I> FUSE_SKU_INFO_0 = 0xd3 [0038.430] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0038.434] I> FUSE_PACKAGE_INFO_0 = 0x2 [0038.438] I> SKU: Prod [0038.440] I> Task: Boost clocks (0x5001462d) [0038.444] I> Initializing PLLC2 for AXI_CBB. [0038.448] I> AXI_CBB : src = 35, divisor = 0 [0038.453] I> Task: Voltage monitor (0x50014639) [0038.457] I> VMON: Vmon re-calibration and fine tuning done [0038.462] I> Task: UPHY init (0x5000dced) [0038.467] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0038.472] I> Task: Boot device init (0x50000b39) [0038.477] I> Boot_device: RCM [0038.480] I> USB configuration success [0038.484] I> Task: TSC init (0x5001fa6d) [0038.488] I> Task: Load membct (0x50011fb9) [0038.492] I> RAM_CODE 0x4000001 [0038.495] I> Loading MEMBCT [0038.497] I> Active chain: 0 [0038.500] I> Slot: 0 [0038.502] I> Binary[0] block-0 (partition size: 0x40000) [0038.507] I> get_binary_info: Binary name: MEM-BCT-0 [0038.512] I> Size of crypto header is 8192 [0038.516] I> BCH load address is : 0x40050000 [0038.520] I> Size of crypto header is 8192 [0038.525] I> BCH of MEM-BCT-0 read from storage [0038.529] I> BCH address is : 0x40050000 [0038.533] I> MEM-BCT-0 header integrity check is success [0038.538] I> Binary magic in BCH component 0 is MEM0 [0038.543] I> component binary type is 0 [0038.549] I> MEM-BCT-0 binary is read from storage [0038.554] I> MEM-BCT-0 binary integrity check is success [0038.559] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0038.566] I> RAM_CODE 0x4000001 [0038.571] I> RAM_CODE 0x4000001 [0038.575] I> Task: Load Page retirement list (0x50011601) [0038.580] I> Task: SDRAM params override (0x50011f95) [0038.585] I> Task: Save mem-bct info (0x500147fd) [0038.590] I> Task: Carveout allocate (0x50014861) [0038.594] I> ECC region[0]: Start:0x0, End:0x0 [0038.598] I> ECC region[1]: Start:0x0, End:0x0 [0038.603] I> ECC region[2]: Start:0x0, End:0x0 [0038.607] I> ECC region[3]: Start:0x0, End:0x0 [0038.611] I> ECC region[4]: Start:0x0, End:0x0 [0038.615] I> Non-ECC region[0]: Start:0x80000000, End:0x480000000 [0038.621] I> Non-ECC region[1]: Start:0x0, End:0x0 [0038.626] I> Non-ECC region[2]: Start:0x0, End:0x0 [0038.631] I> Non-ECC region[3]: Start:0x0, End:0x0 [0038.635] I> Non-ECC region[4]: Start:0x0, End:0x0 [0038.645] I> allocated(CO:44) base:0x449800000 size:0x36800000 align: 0x100000 [0038.652] I> allocated(CO:31) base:0x440000000 size:0x8000000 align: 0x8000000 [0038.659] I> allocated(CO:43) base:0x43c000000 size:0x4000000 align: 0x200000 [0038.666] I> allocated(CO:20) base:0x43a000000 size:0x2000000 align: 0x2000000 [0038.673] I> allocated(CO:24) base:0x438000000 size:0x2000000 align: 0x2000000 [0038.680] I> allocated(CO:28) base:0x436000000 size:0x2000000 align: 0x2000000 [0038.688] I> allocated(CO:29) base:0x434000000 size:0x2000000 align: 0x2000000 [0038.695] I> allocated(CO:22) base:0x448000000 size:0x1000000 align: 0x1000000 [0038.702] I> allocated(CO:41) base:0x433000000 size:0x1000000 align: 0x100000 [0038.709] I> allocated(CO:35) base:0x432200000 size:0xe00000 align: 0x10000 [0038.716] I> allocated(CO:02) base:0x449000000 size:0x800000 align: 0x800000 [0038.722] I> allocated(CO:03) base:0x431800000 size:0x800000 align: 0x800000 [0038.729] I> allocated(CO:06) base:0x431000000 size:0x800000 align: 0x800000 [0038.736] I> allocated(CO:10) base:0x430800000 size:0x800000 align: 0x800000 [0038.743] I> allocated(CO:56) base:0x430000000 size:0x800000 align: 0x200000 [0038.750] I> allocated(CO:07) base:0x42fc00000 size:0x400000 align: 0x400000 [0038.757] I> allocated(CO:33) base:0x42f800000 size:0x400000 align: 0x200000 [0038.764] I> allocated(CO:01) base:0x432100000 size:0x100000 align: 0x100000 [0038.771] I> allocated(CO:04) base:0x432000000 size:0x100000 align: 0x100000 [0038.778] I> allocated(CO:05) base:0x42f700000 size:0x100000 align: 0x100000 [0038.785] I> allocated(CO:08) base:0x42f600000 size:0x100000 align: 0x100000 [0038.792] I> allocated(CO:09) base:0x42f500000 size:0x100000 align: 0x100000 [0038.799] I> allocated(CO:15) base:0x42f400000 size:0x100000 align: 0x100000 [0038.806] I> allocated(CO:17) base:0x42f300000 size:0x100000 align: 0x100000 [0038.813] I> allocated(CO:23) base:0x42f200000 size:0x100000 align: 0x100000 [0038.819] I> allocated(CO:27) base:0x42f100000 size:0x100000 align: 0x100000 [0038.826] I> allocated(CO:42) base:0x42f000000 size:0x100000 align: 0x100000 [0038.833] I> allocated(CO:54) base:0x42ef80000 size:0x80000 align: 0x80000 [0038.840] I> allocated(CO:34) base:0x42ef70000 size:0x10000 align: 0x10000 [0038.847] I> allocated(CO:46) base:0x400000000 size:0x20000000 align: 0x20000000 [0038.854] I> allocated(CO:47) base:0x42ea00000 size:0x400000 align: 0x200000 [0038.861] I> allocated(CO:72) base:0x42e800000 size:0x200000 align: 0x10000 [0038.868] I> allocated(CO:48) base:0x42ef50000 size:0x20000 align: 0x10000 [0038.875] I> allocated(CO:69) base:0x42ef30000 size:0x20000 align: 0x10000 [0038.881] I> allocated(CO:49) base:0x42ef20000 size:0x10000 align: 0x10000 [0038.888] I> allocated(CO:50) base:0x42ef10000 size:0x10000 align: 0x10000 [0038.895] I> allocated(CO:52) base:0x42ef00000 size:0x10000 align: 0x10000 [0038.902] I> NSDRAM base: 0x80000000, end: 0x42ef70000 [0038.907] I> Task: Thermal check (0x500208f9) [0038.911] I> max_chip_limit = 105 [0038.914] I> min_chip_limit = -28 [0038.917] I> max temp read = 28 [0038.920] I> min temp read = 26 [0038.923] I> Task: Update FSI SCR with thermal fuse data (0x50020a05) [0038.929] I> Task: Enable WDT 5th expiry (0x50020699) [0038.934] I> Task: I2C register (0x50000ad9) [0038.938] I> Task: Reset FSI (0x50014635) [0038.942] I> Task: Pinmux init (0x500137bd) [0038.947] I> Task: Prod config init (0x50013c09) [0038.951] I> Task: Pad voltage init (0x50013859) [0038.956] I> Task: Prod init (0x50013c4d) [0038.959] I> Task: Common rail init (0x50014305) [0038.964] I> DONE: Thermal config [0038.968] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0038.976] I> DONE: SOC rail config [0038.979] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0038.986] I> DONE: MEMIO rail config [0038.990] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT. [0038.996] I> DONE: GPU rail info [0038.999] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT. [0039.005] I> DONE: CV rail info [0039.008] I> Task: Mem clock src (0x50011de5) [0039.012] I> Task: Misc. board config (0x500143ad) [0039.017] W> PMIC_CONFIG: Platform config not found in MB1 BCT. [0039.023] I> Task: SDRAM init (0x50011de9) [0039.029] I> SDRAM-params @ 0xd485000 [0039.033] I> MSS code-drop: NvBootSdramInit [0039.037] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0039.044] I> MSS CAR: Init PLLM [0039.047] I> MSS CAR: Init PLLHUB [0039.052] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0039.063] I> mb1_sdram_init Done ! [0039.067] I> SDRAM Size in Total 0x400000000 [0039.071] I> Task: Dram Ecc scrub (0x50011729) [0039.075] I> Task: DRAM alias check (0x50011f8d) [0039.093] I> Task: Program NSDRAM carveout (0x50015171) [0039.099] I> NSDRAM carveout encryption is enabled [0039.105] I> Program NSDRAM carveout [0039.109] I> Task: Register checker (0x50011f91) [0039.116] I> Task: Enable clock-mon (0x5001fa5d) [0039.123] I> FMON: Fmon re-programming done [0039.128] I> Task: Mapper init (0x5001dfed) [0039.133] I> Task: SC7 Context Init (0x5001fd5d) [0039.139] I> Task: CCPLEX IST init (0x5000d561) [0039.145] I> Task: CPU WP0 (0x5000c7a9) [0039.151] I> Loading MCE [0039.153] I> Active chain: 0 [0039.157] I> Slot: 0 [0039.159] I> Binary[8] block-0 (partition size: 0x80000) [0039.165] I> get_binary_info: Binary name: MCE [0039.170] I> Size of crypto header is 8192 [0039.175] I> BCH load address is : 0x4003e000 [0039.181] I> Size of crypto header is 8192 [0041.968] I> BCH of MCE read from storage [0041.972] I> BCH address is : 0x4003e000 [0041.978] I> MCE header integrity check is success [0041.983] I> Binary magic in BCH component 0 is MTSM [0041.989] I> component binary type is 8 [0041.993] I> Size of crypto header is 8192 [0042.006] I> MCE binary is read from storage [0042.012] I> MCE binary integrity check is success [0042.017] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0042.025] I> Size of crypto header is 8192 [0042.030] I> Sending WP0 mailbox command to PSC [0042.041] I> Task: XUSB Powergate (0x50000ae5) [0042.047] I> Skipping powergate XUSB. [0042.051] I> Task: MB1 fixed firewalls (0x5001f0d9) [0042.071] I> Task: Load bpmp-fw (0x5001f41d) [0042.077] I> Active chain: 0 [0042.080] I> Slot: 0 [0042.083] I> Binary[15] block-0 (partition size: 0x180000) [0042.089] I> get_binary_info: Binary name: BPMP_FW [0042.094] I> Size of crypto header is 8192 [0042.099] I> BCH load address is : 0x807fe000 [0042.105] I> Size of crypto header is 8192 [0042.110] I> BCH of BPMP_FW read from storage [0042.115] I> BCH address is : 0x807fe000 [0042.120] I> BPMP_FW header integrity check is success [0042.126] I> Binary magic in BCH component 0 is BPMF [0042.132] I> component binary type is 15 [0042.136] I> Size of crypto header is 8192 [0042.188] I> BPMP_FW binary is read from storage [0042.196] I> BPMP_FW binary integrity check is success [0042.201] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfdc40) [0042.210] I> Active chain: 0 [0042.213] I> Slot: 0 [0042.216] I> Binary[16] block-251658752 (partition size: 0x400000) [0042.224] I> get_binary_info: Binary name: BPMP_FW_DTB [0042.229] I> Size of crypto header is 8192 [0042.234] I> BCH load address is : 0x807fc000 [0042.240] I> Size of crypto header is 8192 [0042.245] I> BCH of BPMP_FW_DTB read from storage [0042.250] I> BCH address is : 0x807fc000 [0042.256] I> BPMP_FW_DTB header integrity check is success [0042.262] I> Binary magic in BCH component 0 is BPMD [0042.267] I> component binary type is 16 [0042.271] I> Size of crypto header is 8192 [0042.282] I> BPMP_FW_DTB binary is read from storage [0042.288] I> BPMP_FW_DTB binary integrity check is success [0042.294] I> Binary BPMP_FW_DTB loaded successfully at 0x807dc170 (0x1fe80) [0042.303] I> Task: Load psc-fw (0x5001f5a5) [0042.309] I> Active chain: 0 [0042.313] I> Slot: 0 [0042.315] I> Binary[17] block-0 (partition size: 0xc0000) [0042.321] I> get_binary_info: Binary name: PSC_FW [0042.327] I> Size of crypto header is 8192 [0042.331] I> BCH load address is : 0x80ffe000 [0042.337] I> Size of crypto header is 8192 [0042.342] I> BCH of PSC_FW read from storage [0042.347] I> BCH address is : 0x80ffe000 [0042.353] I> PSC_FW header integrity check is success [0042.358] I> Binary magic in BCH component 0 is PFWP [0042.364] I> component binary type is 17 [0042.368] I> Size of crypto header is 8192 [0042.390] I> PSC_FW binary is read from storage [0042.396] I> PSC_FW binary integrity check is success [0042.401] I> Binary PSC_FW loaded successfully at 0x80000000 (0x59980) [0042.410] I> Task: Load nvdec-fw (0x5001f619) [0042.416] I> Active chain: 0 [0042.419] I> Slot: 0 [0042.421] I> Binary[7] block-0 (partition size: 0x100000) [0042.428] I> get_binary_info: Binary name: NVDEC [0042.433] I> Size of crypto header is 8192 [0042.438] I> BCH load address is : 0x800fe000 [0042.443] I> Size of crypto header is 8192 [0042.448] I> BCH of NVDEC read from storage [0042.453] I> BCH address is : 0x800fe000 [0042.459] I> NVDEC header integrity check is success [0042.464] I> Binary magic in BCH component 0 is NDEC [0042.470] I> component binary type is 7 [0042.474] I> Size of crypto header is 8192 [0042.492] I> NVDEC binary is read from storage [0042.498] I> NVDEC binary integrity check is success [0042.503] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0042.514] I> Task: Load tsec-fw (0x5001f9a5) [0042.520] I> TSEC-FW load support not enabled [0042.524] I> Task: GPIO interrupt map (0x50014541) [0042.531] I> Task: SC7 context save (0x5001fe9d) [0042.537] I> Task: Load MB2/Applet/FSKP (0x5000d691) [0042.543] I> Loading MB2 [0042.546] I> Active chain: 0 [0042.549] I> Slot: 0 [0042.552] I> Binary[6] block-0 (partition size: 0x80000) [0042.558] I> get_binary_info: Binary name: MB2 [0042.563] I> Size of crypto header is 8192 [0042.568] I> BCH load address is : 0x8007e000 [0042.574] I> Size of crypto header is 8192 [0042.579] I> BCH of MB2 read from storage [0042.583] I> BCH address is : 0x8007e000 [0042.589] I> MB2 header integrity check is success [0042.594] I> Binary magic in BCH component 0 is MB2B [0042.600] I> component binary type is 6 [0042.604] I> Size of crypto header is 8192 [0042.628] I> MB2 binary is read from storage [0042.634] I> MB2 binary integrity check is success [0042.640] I> Binary MB2 loaded successfully at 0x80000000 (0x68e00) [0042.648] I> Task: Map CCPLEX SHARED carveout (0x5000d835) [0042.655] I> Task: Prepare MB2 params (0x5000d8f1) [0042.663] I> BR-BCT Boot Chain Fields [0042.667] I> u32_non_gpio_select_boot_chain : 0 [0042.673] I> u32_num_boot_chains : 2 [0042.678] I> bf_bl_gpio_select_boot_chain_1b : 0 [0042.684] I> Task: Program misc carveouts (0x50014bcd) [0042.690] I> Program IPC carveouts [0042.698] I> Task: Dram ecc test (0x500117a5) [0042.704] I> Task: Misc NV security settings (0x5000d0f9) [0042.710] I> NVDEC sticky bits programming done [0042.715] I> Successfully powergated NVDEC [0042.720] I> Task: Disable/Reload WDT (0x500206e1) [0042.726] I> Programmed SLCG global override := 0x0 [0042.732] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-a9c0116a) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : RCM BOOT I> Emulation: I> Entry timestamp: 0x028c98ae I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x430000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e80) I> Task: Enable hot-plug capability (0x50025b5c) I> Task: Set blob address (0x50001e58) I> Task: PSC mailbox init (0x50015c10) I> Task: Crypto init (0x5000573c) I> Task: Enable GP-SE clock (0x50001fe4) I> Task: DICE Identity init (0x50018fcc) I> DICE is not enabled. I> Task: I2C register (0x50001e44) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e2c) I> Task: Load and authenticate registered FWs (0x5001bfc0) I> Task: Load AUXP FWs (0x500256fc) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x42f600000 I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x42f300000 I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x43a000000 I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x42fc00000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x42f700000 I> Task: Carveout setup (0x5001e6a0) I> Program remaining OEM carveouts I> Task: Enable FSI VMON (0x5001566c) I> Task: Restore XUSB sec (0x50001d44) I> Task: Enable FSI SE clock (0x5001606c) I> Task: Initialize SBSA UART CAR (0x50001f48) I> Task: Initialize CPUBL Params (0x50016f88) I> CPUBL-params @ 0x436000000 I> Task: Prepare eeprom data (0x50016d54) I> Task: Unpowergate APE (0x500167cc) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: OEM firewalls (0x50022920) I> OEM firewalls configured I> Task: Powergate APE (0x50016940) I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings (0x50022ff0) I> Task: Unhalt AUXPs (0x50025964) I> Unhalting SPE.. I> Enabling combined UART ����spe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 243b265b351d6bb9cc7b2e3acc5d90f8 spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler �� I> Task: Trigger mailbox for PSC-BL1 exit (0x50015c90) I> Sending opcode 0x4d420802 to psc ��INFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x448002000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: 8a33b23-73b589c-8a15f76-rel-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 ��I> Received ACK from psc I> Tas��INFO: MONITOR: user task addr:�� bpmp: socket 0 bpmp: base binary md5 is ccd7dae126b648f6d4de17417b40e939 bpmp: combined binary md5��0x448022000, blob offset:0x00020000 INFO: MONITOR: populated user images:13 �� is 9a7bb16aee9be45a56e6b18b82f5e183 bpmp: firmware tag is 9a7bb16aee9be45a56e6-ccd7dae126b initialized vwdt ��INFO: mret to Supervisor! INFO: psc supervisor init. ��initialized mail_early initialized fuse initialized vfrel initia��INFO: psc_irq_init... INFO: enter idle task. ��lized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized tj_init initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ��k: Start secure NOR provision (0x50018af8) I> Task: Load FSI keyblo��initialized avfs_clk_platform initialized powergate ��b (0x500160b4) I> Task: ��initialized dvs ��Unh��initialized clk_mach_config initialized pm suspend progress: 0x0 initialized suspend initialized strap initialized mce_dbell ��alt AUXPs (0x5002596c) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalt successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x50017080) I> Task: Load TOS (0x50017784) I> Task: Load and authenticate registered FWs (0x5001bfc0) ��[ 4.753846] Camera-FW on t234-rce-safe started ��I> MB2-params @ 0x40060000 ��TCU early console enabled. ��I> cpubl: Authentication Finalize Done I> Bin��initialized emc initialized emc_mrq ��ary cpubl loaded successfully at 0x42ea000��initialized clk_cal initialized uphy_dt initialized uphy_mrq �� ��00 ��initialized uphy ��I> tos: Authentication Finalize Done I> Binary��initialized pg_late initialized pg_mrq_init swdtimer_init: 0 reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post �� tos loaded successfully at 0x43fdfe0d0 I> Relocating OP-TEE dtb from: 0x43feff840 to 0x42ef30000��initialized clk_cal_late initialized noc_late initialized cvc ��, size: 0x1976 I> [0] START: 0x80��initialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable pwm3 enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable usb2_trk enable xusb_ss_dev enable xusb_fs_dev enable xusb_falcon enable dsi_lp enable xusb_core_mux enable xusb_core_dev initialized clk_��[ 4.883484] Camera-FW on t234-rce-safe ready SHA1=10150ec0 (crt 21.778 ms, total boot 152.474 ms) ��mach_post initialized pg_post initialized regulator_post initialized profile initialized fuse_late initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post bpmp: init complete ��000000, SIZE: 0x3aef70000 I> [1] START: 0x436000000, SIZE: 0x2000000 ��DCE: FW Boot Done ��I> Setting NS memory ranges to OP-TEE dtb finished. I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x430000200 I> EKB detected (length: 0x410) @ VA:0x430000200 I> Task: Prepare TOS params (0x500176fc) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x42ef30000 I> Task: Disable MSS perf stats (0x500259f8) I> Task: Program display sticky bits (0x50025974) I> Task: SMMU external bypass disable (0x50015bf4) I> Task: SMMU init (0x50015b10) I> Task: Program CBB PCIE AMAP regions (0x50018ce0) I> Task: Program GICv3 registers (0x50025a98) I> Task: Audit firewall settings (0x50022c08) I> MB2 finished ��NOTICE: BL31: v2.6(release):6363e7382 NOTICE: BL31: Built : 15:09:30, Jan 24 2023 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.19 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Jan 24 23:20:42 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: WARNING: Test OEM keys are being used! I/TC: This is only for TZ-SE testing and should NOT be used for a shipping product! I/TC: Primary CPU switching to normal world boot �� Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. ......EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ��I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot ��[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.104-l4t-r35.2.1+gf5dd419 (oe-user@oe-host) (aarch64-poky-linux-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200910) #1 SMP PREEMPT3 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: NVIDIA Orin NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: SMBIOS=0xffff0000 SMBIOS 3.0=0x427710000 MEMATTR=0x427354018 RNG=0x42e7ed298 MEMRESERVE=0x42735ef18 [ 0.000000] efi: seeding entropy pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000414000000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000437ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000423ffffff] [ 0.000000] node 0: [mem 0x0000000424000000-0x00000004261bffff] [ 0.000000] node 0: [mem 0x00000004261c0000-0x000000042730ffff] [ 0.000000] node 0: [mem 0x0000000427310000-0x000000042733ffff] [ 0.000000] node 0: [mem 0x0000000427340000-0x000000042735ffff] [ 0.000000] node 0: [mem 0x0000000427360000-0x000000042737ffff] [ 0.000000] node 0: [mem 0x0000000427380000-0x00000004273fdfff] [ 0.000000] node 0: [mem 0x00000004273fe000-0x0000000427624fff] [ 0.000000] node 0: [mem 0x0000000427625000-0x000000042765ffff] [ 0.000000] node 0: [mem 0x0000000427660000-0x000000042771ffff] [ 0.000000] node 0: [mem 0x0000000427720000-0x000000042854ffff] [ 0.000000] node 0: [mem 0x0000000428550000-0x00000004287cffff] [ 0.000000] node 0: [mem 0x00000004287d0000-0x00000004288cffff] [ 0.000000] node 0: [mem 0x00000004288d0000-0x000000042896ffff] [ 0.000000] node 0: [mem 0x0000000428970000-0x0000000428a7ffff] [ 0.000000] node 0: [mem 0x0000000428a80000-0x0000000428b1ffff] [ 0.000000] node 0: [mem 0x0000000428b20000-0x00000004293effff] [ 0.000000] node 0: [mem 0x00000004293f0000-0x000000042977ffff] [ 0.000000] node 0: [mem 0x0000000429780000-0x000000042e79ffff] [ 0.000000] node 0: [mem 0x000000042e7a0000-0x000000042e7effff] [ 0.000000] node 0: [mem 0x000000042e7f0000-0x000000042e7fffff] [ 0.000000] node 0: [mem 0x000000042ea00000-0x000000042eefffff] [ 0.000000] node 0: [mem 0x0000000436000000-0x0000000437ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000437ffffff] [ 0.000000] On node 0, zone Normal: 256 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3809024 [ 0.000000] Kernel command line: mminit_loglevel=4 console=ttyTCU0,115200 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB) [ 0.000000] Memory: 14566372K/15479808K available (17984K kernel code, 3142K rwdata, 7196K rodata, 4032K init, 1108K bss, 651292K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x418 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000002] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000637] Console: colour dummy device 80x25 [ 0.000679] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000687] pid_max: default: 32768 minimum: 301 [ 0.000751] LSM: Security Framework initializing [ 0.000775] Yama: becoming mindful. [ 0.000795] SELinux: Initializing. [ 0.000867] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000892] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.001950] rcu: Hierarchical SRCU implementation. [ 0.002037] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.002468] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/p3768/kernel-dts/ts [ 0.002473] DTB Build time: Jan 24 2023 15:26:10 [ 0.003675] Tegra Revision: A01 SKU: 0xd3 CPU Process: 0 SoC Process: 0 [ 0.003886] Remapping and enabling EFI services. [ 0.004978] smp: Bringing up secondary CPUs ... [ 0.033657] Detected PIPT I-cache on CPU1 [ 0.033690] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.033719] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.062343] Detected PIPT I-cache on CPU2 [ 0.062354] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.062371] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.090959] Detected PIPT I-cache on CPU3 [ 0.090968] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.090983] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.121625] Detected PIPT I-cache on CPU4 [ 0.121646] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [ 0.121674] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.150311] Detected PIPT I-cache on CPU5 [ 0.150322] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [ 0.150337] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.178943] Detected PIPT I-cache on CPU6 [ 0.178954] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [ 0.178970] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.207576] Detected PIPT I-cache on CPU7 [ 0.207588] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [ 0.207604] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.207661] smp: Brought up 1 node, 8 CPUs [ 0.207674] SMP: Total of 8 processors activated. [ 0.207678] CPU features: detected: Privileged Access Never [ 0.207680] CPU features: detected: LSE atomic instructions [ 0.207681] CPU features: detected: User Access Override [ 0.207683] CPU features: detected: 32-bit EL0 Support [ 0.207686] CPU features: detected: Common not Private translations [ 0.207688] CPU features: detected: RAS Extension Support [ 0.207689] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.207691] CPU features: detected: CRC32 instructions [ 0.207692] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.240631] CPU: All CPU(s) started at EL2 [ 0.242568] devtmpfs: initialized [ 0.257435] Registered cp15_barrier emulation handler [ 0.257443] Registered setend emulation handler [ 0.257448] KASLR enabled [ 0.257563] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.257575] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.259065] pinctrl core: initialized pinctrl subsystem [ 0.259599] SMBIOS 3.0.0 present. [ 0.259607] DMI: Unknown NVIDIA Orin NX Developer Kit/NVIDIA Orin NX Developer Kit, BIOS 2.1-32413640 01/24/2023 [ 0.259873] NET: Registered protocol family 16 [ 0.260482] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.260587] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.260688] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.260713] audit: initializing netlink subsys (disabled) [ 0.260790] audit: type=2000 audit(0.260:1): state=initialized audit_enabled=0 res=1 [ 0.260965] thermal_sys: Registered thermal governor 'step_wise' [ 0.260966] thermal_sys: Registered thermal governor 'power_allocator' [ 0.260969] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.261753] cpuidle: using governor menu [ 0.261826] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.261905] ASID allocator initialised with 32768 entries [ 0.261994] Serial: AMBA PL011 UART driver [ 0.263710] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.263730] Tegra reboot handler registered. [ 0.281143] mc: mapped MMIO address: 0xffff800010b10000 -> 0x2c10000 [ 0.281152] mc: mapped MMIO address: 0xffff800010b30000 -> 0x2c20000 [ 0.281158] mc: mapped MMIO address: 0xffff800010b50000 -> 0x2c30000 [ 0.281163] mc: mapped MMIO address: 0xffff800010b70000 -> 0x2c40000 [ 0.281168] mc: mapped MMIO address: 0xffff800010b90000 -> 0x2c50000 [ 0.281173] mc: mapped MMIO address: 0xffff800010bb0000 -> 0x2b80000 [ 0.281179] mc: mapped MMIO address: 0xffff800010bd0000 -> 0x2b90000 [ 0.281184] mc: mapped MMIO address: 0xffff800010bf0000 -> 0x2ba0000 [ 0.281191] mc: mapped MMIO address: 0xffff800010c10000 -> 0x2bb0000 [ 0.281196] mc: mapped MMIO address: 0xffff800010c30000 -> 0x1700000 [ 0.281201] mc: mapped MMIO address: 0xffff800010c50000 -> 0x1710000 [ 0.281206] mc: mapped MMIO address: 0xffff800010c70000 -> 0x1720000 [ 0.281211] mc: mapped MMIO address: 0xffff800010c90000 -> 0x1730000 [ 0.281216] mc: mapped MMIO address: 0xffff800010cb0000 -> 0x1740000 [ 0.281224] mc: mapped MMIO address: 0xffff800010cd0000 -> 0x1750000 [ 0.281229] mc: mapped MMIO address: 0xffff800010cf0000 -> 0x1760000 [ 0.281234] mc: mapped MMIO address: 0xffff800010d10000 -> 0x1770000 [ 0.281242] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.281260] mc-err: mcerr ops are set to t23x [ 0.281894] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 62, base_baud = 0) is a SBSA [ 0.285575] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.285579] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.285580] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.285582] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.287242] ACPI: Interpreter disabled. [ 0.287618] ddr-vddq: supplied by vdd-5v [ 0.287794] ddr-vdd2: supplied by vdd-5v [ 0.287898] vdd-AO-1v2: supplied by vdd-5v [ 0.288000] vdd-3v3: supplied by vdd-5v [ 0.288097] vdd-rtc: supplied by vdd-AO-1v2 [ 0.288177] vdd-0v95-uphy: supplied by vdd-AO-1v2 [ 0.288281] vdd-0v95-hdmi: supplied by vdd-AO-1v2 [ 0.288485] vdd-1v8: supplied by vdd-3v3-sys [ 0.288569] vdd-3v3-AO: supplied by vdd-5v-sys [ 0.288651] vdd-av10-hub: supplied by vdd-5v-sys [ 0.288749] vdd-vbus-a: supplied by vdd-5v-sys [ 0.288832] vdd-vbus-b: supplied by vdd-5v-sys [ 0.288964] vdd-3v3-dp: supplied by vdd-3v3-sys [ 0.289180] iommu: Default domain type: Translated [ 0.289209] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.289381] SCSI subsystem initialized [ 0.289449] usbcore: registered new interface driver usbfs [ 0.289463] usbcore: registered new interface driver hub [ 0.289475] usbcore: registered new device driver usb [ 0.289647] mc: Linux media interface: v0.10 [ 0.289656] videodev: Linux video capture interface: v2.00 [ 0.289790] pps_core: LinuxPPS API ver. 1 registered [ 0.289792] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.289798] PTP clock support registered [ 0.289998] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 0.290051] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 0.291361] Registered efivars operations [ 0.291467] FPGA manager framework [ 0.291502] Advanced Linux Sound Architecture Driver Initialized. [ 0.291755] Bluetooth: Core ver 2.22 [ 0.291769] NET: Registered protocol family 31 [ 0.291771] Bluetooth: HCI device and connection manager initialized [ 0.291777] Bluetooth: HCI socket layer initialized [ 0.291781] Bluetooth: L2CAP socket layer initialized [ 0.291788] Bluetooth: SCO socket layer initialized [ 0.292304] camchar: rtcpu character device driver loaded [ 0.292512] clocksource: Switched to clocksource arch_sys_counter [ 0.440617] VFS: Disk quotas dquot_6.6.0 [ 0.440656] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.440806] pnp: PnP ACPI: disabled [ 0.442626] la/ptsa driver initialized. [ 0.442681] NET: Registered protocol family 2 [ 0.442885] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.445108] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.445129] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.445235] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.445729] TCP: Hash tables configured (established 131072 bind 65536) [ 0.445796] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.445828] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.445922] NET: Registered protocol family 1 [ 0.446225] RPC: Registered named UNIX socket transport module. [ 0.446230] RPC: Registered udp transport module. [ 0.446232] RPC: Registered tcp transport module. [ 0.446233] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.446245] PCI: CLS 0 bytes, default 64 [ 0.446373] Trying to unpack rootfs image as initramfs... [ 0.478992] Freeing initrd memory: 2140K [ 0.481119] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.481270] kvm [1]: IPA Size Limit: 48 bits [ 0.481405] kvm [1]: VHE mode initialized successfully [ 0.482114] Initialise system trusted keyrings [ 0.482202] workingset: timestamp_bits=46 max_order=22 bucket_order=0 [ 0.484387] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.484642] NFS: Registering the id_resolver key type [ 0.484654] Key type id_resolver registered [ 0.484656] Key type id_legacy registered [ 0.484692] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.484702] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.484714] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.496668] NET: Registered protocol family 38 [ 0.496674] Key type asymmetric registered [ 0.496678] Asymmetric key parser 'x509' registered [ 0.496698] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.496748] io scheduler mq-deadline registered [ 0.496752] io scheduler kyber registered [ 0.500436] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.500470] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.500489] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.503123] tegra_dc_assign_hw_data: no matching compatible node [ 0.503127] tegradccommon module_init failed [ 0.503131] tegradc module_init failed [ 0.503389] EINJ: ACPI disabled. [ 0.504881] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.504886] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.504889] tegra-pmc: ### PMC reset level: L1 [ 0.504890] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.506128] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.926944] random: fast init done [ 2.001149] printk: console [ttyTCU0] enabled [ 2.006123] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.011995] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.016543] arm-smmu 12000000.iommu: stage 1 translation [ 2.021878] arm-smmu 12000000.iommu: stage 2 translation [ 2.027389] arm-smmu 12000000.iommu: nested translation [ 2.032556] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.039729] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 2.048374] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.052856] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.059241] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.066574] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.072282] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.077004] arm-smmu 10000000.iommu: stage 1 translation [ 2.082515] arm-smmu 10000000.iommu: stage 2 translation [ 2.087940] arm-smmu 10000000.iommu: nested translation [ 2.093367] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.100541] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 2.109238] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.113754] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.120314] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.127301] arm-smmu 8000000.iommu: probing hardware configuration... [ 2.133444] arm-smmu 8000000.iommu: SMMUv2 with: [ 2.138167] arm-smmu 8000000.iommu: stage 1 translation [ 2.143677] arm-smmu 8000000.iommu: stage 2 translation [ 2.149103] arm-smmu 8000000.iommu: nested translation [ 2.154268] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 2.161442] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 2.170137] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 2.174655] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.181214] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.188432] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.197186] tegra_profiler: version: 1.150, samples/io: 50/29 [ 2.201432] tegra_profiler: auth: init [ 2.205480] nvsciipc: loaded module [ 2.209952] tegra23x-qspi 3270000.spi: Adding to iommu group 0 [ 2.214900] tegra23x-qspi 3270000.spi: Node prod_c_nonsecure has invalid entries [ 2.222170] tegra23x-qspi 3270000.spi: Node prod_c_nonsecure: Child has not proper setting [ 2.230388] tegra23x-qspi 3270000.spi: Node spi: Faild to read the Prod Setting. [ 2.237825] tegra23x-qspi 3270000.spi: Prod settings list not found [ 2.244645] tun: Universal TUN/TAP device driver, 1.6 [ 2.249646] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.256466] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.261995] e1000e: Intel(R) PRO/1000 Network Driver [ 2.266964] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.272840] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.278165] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.283906] PPP generic driver version 2.4.2 [ 2.288094] PPP BSD Compression module registered [ 2.292779] PPP Deflate Compression module registered [ 2.297952] PPP MPPE Compression module registered [ 2.302952] usbcore: registered new interface driver r8152 [ 2.308274] usbcore: registered new interface driver asix [ 2.313788] usbcore: registered new interface driver ax88179_178a [ 2.319905] usbcore: registered new interface driver cdc_ether [ 2.325856] usbcore: registered new interface driver net1080 [ 2.331455] usbcore: registered new interface driver cdc_subset [ 2.337497] usbcore: registered new interface driver zaurus [ 2.343189] usbcore: registered new interface driver cdc_ncm [ 2.348868] usbcore: registered new interface driver aqc111 [ 2.354394] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.360599] ohci-pci: OHCI PCI platform driver [ 2.364892] ohci-platform: OHCI generic platform driver [ 2.370220] tegra-xusb 3610000.xhci: Adding to iommu group 1 [ 2.376197] usbcore: registered new interface driver uas [ 2.381176] usbcore: registered new interface driver usb-storage [ 2.387160] tegra-xudc 3550000.xudc: Adding to iommu group 2 [ 2.392900] mousedev: PS/2 mouse device common for all mice [ 2.398328] usbcore: registered new interface driver xpad [ 2.405595] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.409079] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:01:13 UTC (73) [ 2.416878] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.423137] i2c /dev entries driver [ 2.426671] tegra-i2c 3160000.i2c: Adding to iommu group 3 [ 2.432251] tegra-i2c c240000.i2c: Adding to iommu group 3 [ 2.437646] tegra-i2c 3180000.i2c: Adding to iommu group 3 [ 2.443060] tegra-i2c 3190000.i2c: Adding to iommu group 3 [ 2.448396] tegra-i2c 31b0000.i2c: Adding to iommu group 3 [ 2.453907] tegra-i2c 31c0000.i2c: Adding to iommu group 3 [ 2.459343] tegra-i2c c250000.i2c: Adding to iommu group 3 [ 2.464669] tegra-i2c 31e0000.i2c: Adding to iommu group 3 [ 2.473348] device-mapper: uevent: version 1.0.3 [ 2.474687] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.484161] sdhci: Secure Digital Host Controller Interface driver [ 2.489306] sdhci: Copyright(c) Pierre Ossman [ 2.493589] Synopsys Designware Multimedia Card Interface Driver [ 2.499697] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.505847] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 2.505943] sdhci-tegra 3400000.sdhci: Adding to iommu group 4 [ 2.513089] tegra-bpmp bpmp: firmware: 9a7bb16aee9be45a56e6-ccd7dae126b [ 2.526005] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 2.530319] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x82 [ 2.539779] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 2.540613] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful ��Failed to create /rm/vdd_cpu Failed to create /rm/vdd_cpu debugfs initialized ��[ 4.368909] hid: raw HID events driver (C) Jiri Kosina [ 4.369582] usbcore: registered new interface driver usbhid [ 4.369738] usbhid: USB HID core driver [ 4.370268] tegra-dce d800000.dce: Adding to iommu group 5 [ 4.371677] dce: dce_ipc_channel_init:314 Invalid Channel State [0x0] for ch_type [2] [ 4.372364] tegra234-aon c000000.aon: Adding to iommu group 6 [ 4.373010] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 4.373404] dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0] [ 4.373710] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x1] [ 4.373965] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [1] ... [ 4.374184] dce: dce_admin_setup_clients_ipc:529 Get queue info failed for [2] [ 4.374497] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2] [ 4.374754] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [3] ... [ 4.375206] dce: dce_start_boot_flow:173 DCE_BOOT_DONE [ 4.375806] c000000.aon:hsp: probed [ 4.377596] tegra234-aon c000000.aon: init done [ 4.382369] tegra23x-psc e860000.psc: Adding to iommu group 7 [ 4.387984] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 4.393869] tegra23x-psc e860000.psc: init done [ 4.398733] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 8 [ 4.405515] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 4.416443] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.421914] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.433058] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.443784] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.454783] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.466530] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.479044] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.490935] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (111) [ 4.497121] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.508163] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=10150ec03f8849d1537396903b70d4a48a255aba [ 4.518190] t19x_cache tegra-cache: probed [ 4.520492] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 4.532000] optee: probing for conduit method. [ 4.532145] optee: revision 3.19 (18d0f61b) [ 4.532878] optee: dynamic shared memory is enabled [ 4.540011] optee: initialized driver [ 4.554759] nvpmodel: initialized successfully [ 4.554968] tegra_hv: get_hvd: not initialized yet [ 4.555110] user_ivc_mempool: hypervisor not present [ 4.558508] usbcore: registered new interface driver snd-usb-audio [ 4.564755] u32 classifier [ 4.566849] input device check on [ 4.570528] Actions configured [ 4.573911] Initializing XFRM netlink socket [ 4.578653] NET: Registered protocol family 10 [ 4.584441] Segment Routing with IPv6 [ 4.585996] NET: Registered protocol family 17 [ 4.590586] NET: Registered protocol family 15 [ 4.594996] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.609551] Bluetooth: RFCOMM socket layer initialized [ 4.613354] Bluetooth: RFCOMM ver 1.11 [ 4.617182] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.623035] Bluetooth: HIDP socket layer initialized [ 4.629060] 9pnet: Installing 9P2000 support [ 4.632440] Key type dns_resolver registered [ 4.637691] registered taskstats version 1 [ 4.640893] Loading compiled-in X.509 certificates [ 4.654605] Loaded X.509 cert 'Build time autogenerated kernel key: 9205ed8341ef42ff2ae2bfe6b19a8c9b3e7d5e4a' [ 4.656166] tegra194-pcie 14100000.pcie: Adding to iommu group 9 [ 4.668359] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 4.669297] tegra194-pcie 14160000.pcie: Adding to iommu group 10 [ 4.680259] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 4.680968] tegra194-pcie 140a0000.pcie: Adding to iommu group 11 [ 4.692716] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 4.719680] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 12 [ 4.723816] host1x 13e40000.host1x: Adding to iommu group 13 [ 5.735456] t23x_init_gating_regs: Timed out waiting for syncpt ram init! [ 5.746011] host1x 13e40000.host1x: initialized [ 5.746549] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 14 [ 5.747102] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000) [ 5.748670] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 15 [ 5.749104] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000) [ 5.750719] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 16 [ 5.751145] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000) [ 5.752739] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 17 [ 5.753151] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.754733] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 18 [ 5.755140] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.756729] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 19 [ 5.757164] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.768105] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 20 [ 5.774624] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.786147] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 21 [ 5.792679] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.804160] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 22 [ 5.810671] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000) [ 5.822190] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 23 [ 5.828709] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000) [ 5.840187] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 24 [ 5.846743] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000) [ 5.858246] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 25 [ 5.864743] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000) [ 5.876248] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 26 [ 5.882768] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000) [ 5.894273] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 27 [ 5.900812] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000) [ 5.912308] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 28 [ 5.918812] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000) [ 5.930310] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 29 [ 5.936842] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000) [ 5.948424] falcon 15340000.vic: Adding to iommu group 30 [ 5.958105] falcon 15340000.vic: initialized [ 5.958573] falcon 15380000.nvjpg: Adding to iommu group 31 [ 5.966040] falcon 15380000.nvjpg: initialized [ 5.967278] falcon 15540000.nvjpg1: Adding to iommu group 32 [ 5.976256] falcon 15540000.nvjpg1: initialized [ 5.977706] falcon 154c0000.nvenc: Adding to iommu group 33 [ 5.987721] falcon 154c0000.nvenc: initialized [ 5.987986] falcon 15a50000.ofa: Adding to iommu group 34 [ 5.997033] falcon 15a50000.ofa: initialized [ 5.997824] nvdec 15480000.nvdec: Adding to iommu group 35 [ 6.009190] nvdec 15480000.nvdec: initialized [ 6.009436] tsec 15500000.tsec: Adding to iommu group 36 [ 6.017865] tsec 15500000.tsec: initialized [ 6.020613] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.033548] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.042662] gpio-397 (camera-control-output-low): hogged as output/low [ 6.042871] gpio-486 (camera-control-output-low): hogged as output/low [ 6.044666] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 6.050324] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 6.056501] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.062823] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 6.068352] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.075988] tegra194-isp5 14800000.isp: Adding to iommu group 37 [ 6.081865] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.088614] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 6.094470] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.103402] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.112740] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 38 [ 6.120535] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 39 [ 6.127570] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 6.136704] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 6.142693] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 6.152531] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 6.158690] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.168457] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 6.174467] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 40 [ 6.182844] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000) [ 6.193715] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 41 [ 6.202244] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000) [ 6.212950] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 42 [ 6.221304] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000) [ 6.232190] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 43 [ 6.240564] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000) [ 6.251284] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 44 [ 6.259836] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000) [ 6.270534] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 45 [ 6.279077] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000) [ 6.289761] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 46 [ 6.298299] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000) [ 6.309011] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 47 [ 6.317564] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000) [ 6.328282] pva 16000000.pva0: Adding to iommu group 48 [ 6.338857] pva 16000000.pva0: initialized [ 6.347517] nvdla 15880000.nvdla0: Adding to iommu group 49 [ 6.353284] nvdla 15880000.nvdla0: initialized [ 6.355086] nvdla 158c0000.nvdla1: Adding to iommu group 50 [ 6.360162] nvdla 158c0000.nvdla1: initialized [ 6.361954] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 3 [ 6.364848] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 6.371138] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.377444] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.384034] serial-tegra 3100000.serial: Adding to iommu group 3 [ 6.390368] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 16, base_baud = 0) is a TEGRA_UART [ 6.399621] serial-tegra 3130000.serial: Adding to iommu group 3 [ 6.405097] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 60, base_baud = 0) is a TEGRA_UART [ 6.414206] serial-tegra 3140000.serial: Adding to iommu group 3 [ 6.419920] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 61, base_baud = 0) is a TEGRA_UART [ 6.429076] tegra23x-qspi 3270000.spi: Node prod_c_nonsecure has invalid entries [ 6.435895] tegra23x-qspi 3270000.spi: Node prod_c_nonsecure: Child has not proper setting [ 6.444208] tegra23x-qspi 3270000.spi: Node spi: Faild to read the Prod Setting. [ 6.451645] tegra23x-qspi 3270000.spi: Prod settings list not found [ 6.467152] qspi_mtd spi6.0: MX25U51279G (65536 Kbytes) [ 6.467290] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x4000000 (64MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 6.478727] 1 fixed-partitions partitions found on MTD device spi6.0 [ 6.480960] Creating 1 MTD partitions on "spi6.0": [ 6.485954] 0x000000000000-0x000004000000 : "Whole_flash0" [ 6.510522] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release [ 6.510773] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.510948] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.514735] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 6.523173] tegra-xusb 3610000.xhci: irq 228, io mem 0x03610000 [ 6.529550] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.537573] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.544917] usb usb1: Product: xHCI Host Controller [ 6.549726] usb usb1: Manufacturer: Linux 5.10.104-l4t-r35.2.1+gf5dd419 xhci-hcd [ 6.557166] usb usb1: SerialNumber: 3610000.xhci [ 6.562635] hub 1-0:1.0: USB hub found [ 6.565861] hub 1-0:1.0: 4 ports detected [ 6.570085] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.575286] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.582898] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.590222] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.598474] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.605732] usb usb2: Product: xHCI Host Controller [ 6.610716] usb usb2: Manufacturer: Linux 5.10.104-l4t-r35.2.1+gf5dd419 xhci-hcd [ 6.618154] usb usb2: SerialNumber: 3610000.xhci [ 6.623484] hub 2-0:1.0: USB hub found [ 6.626659] hub 2-0:1.0: 4 ports detected [ 6.651874] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.652702] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.652829] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.653277] tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event probing [ 6.668630] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1989000 KHz, changing to: 1984000 KHz [ 6.671648] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 1988000 KHz, changing to: 1984000 KHz [ 6.677935] tegra194-cpufreq e000000.ccplex: probed with ICC [ 6.683854] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.692889] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 6.692965] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 6.695947] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 6.709162] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 6.717821] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 6.736067] irq: IRQ292: trimming hierarchy from :interrupt-controller@f400000-1 [ 6.736304] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 292 [ 7.816841] tegra194-pcie 14100000.pcie: Phy link never came up [ 7.817093] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 7.817288] pci_bus 0001:00: root bus resource [bus 00-ff] [ 7.817447] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 7.817730] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 7.818048] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 7.818320] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 7.818655] pci 0001:00:00.0: PME# supported from D0 D3hot [ 7.826020] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 7.826178] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 7.826653] pcieport 0001:00:00.0: Adding to iommu group 9 [ 7.826993] pcieport 0001:00:00.0: PME: Signaling with IRQ 54 [ 7.827398] pcieport 0001:00:00.0: AER: enabled with IRQ 54 [ 7.827784] pci_bus 0001:01: busn_res: [bus 01-ff] is released [ 7.828024] pci 0001:00:00.0: Removing from iommu group 9 [ 7.828178] pci_bus 0001:00: busn_res: [bus 00-ff] is released [ 7.832632] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 7.838129] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 7.844103] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 7.852744] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 7.861404] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 7.976660] tegra194-pcie 14160000.pcie: Link up [ 7.977958] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 7.978147] pci_bus 0004:00: root bus resource [bus 00-ff] [ 7.978300] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 7.978557] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 7.978836] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 7.979086] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 7.979391] pci 0004:00:00.0: PME# supported from D0 D3hot [ 7.983267] pci 0004:01:00.0: [1344:6001] type 00 class 0x010802 [ 7.983604] pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 7.988671] pci 0004:00:00.0: BAR 14: assigned [mem 0x2428000000-0x24280fffff] [ 7.988855] pci 0004:01:00.0: BAR 0: assigned [mem 0x2428000000-0x2428003fff 64bit] [ 7.989131] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 7.989262] pci 0004:00:00.0: bridge window [mem 0x2428000000-0x24280fffff] [ 7.989463] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 7.990476] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 7.999137] pcieport 0004:00:00.0: Adding to iommu group 10 [ 8.004896] pcieport 0004:00:00.0: PME: Signaling with IRQ 56 [ 8.010708] pcieport 0004:00:00.0: AER: enabled with IRQ 56 [ 8.016534] nvme 0004:01:00.0: Adding to iommu group 10 [ 8.021888] nvme nvme0: pci function 0004:01:00.0 [ 8.026295] nvme 0004:01:00.0: enabling device (0000 -> 0002) [ 8.026980] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 8.038317] vdd-3v3-sd: supplied by vdd-3v3 [ 8.042572] irq: IRQ294: trimming hierarchy from :pmc@c360000 [ 8.049889] tegra194-isp5 14800000.isp: initialized [ 8.054886] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 8.059048] (NULL device *): fops function table already registered [ 8.066885] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 8.070742] nvme nvme0: allocated 64 MiB host memory buffer. [ 8.072087] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 8.072187] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 8.088990] irq: IRQ293: trimming hierarchy from :interrupt-controller@f400000-1 [ 8.100702] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 292 [ 8.104784] nvme nvme0: 4/0/0 default/read/poll queues [ 8.116080] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 8.201014] tegra194-pcie 140a0000.pcie: host bridge /pcie@140a0000 ranges: [ 8.201208] tegra194-pcie 140a0000.pcie: IO 0x002a100000..0x002a1fffff -> 0x002a100000 [ 8.201436] tegra194-pcie 140a0000.pcie: MEM 0x3528000000..0x352fffffff -> 0x0040000000 [ 8.201663] tegra194-pcie 140a0000.pcie: MEM 0x3240000000..0x3527ffffff -> 0x3240000000 [ 8.308517] tegra194-pcie 140a0000.pcie: Link up [ 8.309804] tegra194-pcie 140a0000.pcie: PCI host bridge to bus 0008:00 [ 8.309997] pci_bus 0008:00: root bus resource [bus 00-ff] [ 8.310140] pci_bus 0008:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x2a100000-0x2a1fffff]) [ 8.310407] pci_bus 0008:00: root bus resource [mem 0x3528000000-0x352fffffff] (bus address [0x40000000-0x47ffffff]) [ 8.310692] pci_bus 0008:00: root bus resource [mem 0x3240000000-0x3527ffffff pref] [ 8.310948] pci 0008:00:00.0: [10de:229c] type 01 class 0x060400 [ 8.311257] pci 0008:00:00.0: PME# supported from D0 D3hot [ 8.315720] pci 0008:01:00.0: [10ec:8168] type 00 class 0x020000 [ 8.316011] pci 0008:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 8.316335] pci 0008:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 8.316628] pci 0008:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 8.317821] pci 0008:01:00.0: supports D1 D2 [ 8.317929] pci 0008:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 8.322179] pci 0008:00:00.0: BAR 14: assigned [mem 0x3528000000-0x35280fffff] [ 8.322368] pci 0008:00:00.0: BAR 13: assigned [io 0x200000-0x200fff] [ 8.323590] pci 0008:01:00.0: BAR 4: assigned [mem 0x3528000000-0x3528003fff 64bit] [ 8.331386] pci 0008:01:00.0: BAR 2: assigned [mem 0x3528004000-0x3528004fff 64bit] [ 8.339257] pci 0008:01:00.0: BAR 0: assigned [io 0x200000-0x2000ff] [ 8.345757] pci 0008:00:00.0: PCI bridge to [bus 01-ff] [ 8.350980] pci 0008:00:00.0: bridge window [io 0x200000-0x200fff] [ 8.357368] pci 0008:00:00.0: bridge window [mem 0x3528000000-0x35280fffff] [ 8.364729] pci 0008:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 8.373268] pci 0008:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 8.381966] pcieport 0008:00:00.0: Adding to iommu group 11 [ 8.387605] pcieport 0008:00:00.0: PME: Signaling with IRQ 58 [ 8.393411] pcieport 0008:00:00.0: AER: enabled with IRQ 58 [ 8.399955] irq: IRQ301: trimming hierarchy from :pmc@c360000 [ 8.404605] irq: IRQ302: trimming hierarchy from :interrupt-controller@f400000-1 [ 8.412018] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 8.419433] tegra-se-nvhost 15810000.se: Adding to iommu group 51 [ 8.425277] tegra-se-nvhost 15810000.se: initialized [ 8.438836] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 8.439117] tegra-se-nvhost 15820000.se: Adding to iommu group 52 [ 8.442491] tegra-se-nvhost 15820000.se: initialized [ 8.450141] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 8.453190] tegra-se-nvhost 15840000.se: Adding to iommu group 53 [ 8.459678] tegra-se-nvhost 15840000.se: initialized [ 8.468294] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 8.471063] tegra_actmon d230000.actmon: in actmon_register()... [ 8.476697] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 8.482376] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 8.490124] hvc_sysfs: hypervisor is not present [ 8.529891] ALSA device list: [ 8.529975] No soundcards found. [ 8.530697] Freeing unused kernel memory: 4032K [ 8.530843] Run /init as init process [ 8.671463] random: crng init done [OK: /dev/nvme0n1p1] Mounting /dev/nvme0n1p1... [ 8.758635] EXT4-fs (nvme0n1p1): recovery complete [ 8.758789] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) Switching to rootfs on /dev/nvme0n1p1... switch_root: can't execute '/sbin/init': No such file or directory [ 8.764060] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 [ 8.764280] CPU: 2 PID: 1 Comm: switch_root Not tainted 5.10.104-l4t-r35.2.1+gf5dd419 #1 [ 8.764487] Hardware name: Unknown NVIDIA Orin NX Developer Kit/NVIDIA Orin NX Developer Kit, BIOS 2.1-32413640 01/24/2023 [ 8.764785] Call trace: [ 8.764866] dump_backtrace+0x0/0x1c8 [ 8.764959] show_stack+0x2c/0x38 [ 8.765052] dump_stack+0xd8/0x138 [ 8.765149] panic+0x178/0x380 [ 8.765236] complete_and_exit+0x0/0x30 [ 8.765337] do_group_exit+0x48/0xa8 [ 8.765434] __arm64_sys_exit_group+0x24/0x28 [ 8.765550] el0_svc_common.constprop.0+0x7c/0x1c0 [ 8.765682] do_el0_svc+0x34/0xa0 [ 8.765781] el0_svc+0x1c/0x28 [ 8.765891] el0_sync_handler+0xa8/0xb0 [ 8.766472] el0_sync+0x16c/0x180 [ 8.766978] SMP: stopping secondary CPUs [ 8.768561] Kernel Offset: 0x23e4043d0000 from 0xffff800010000000 [ 8.774747] PHYS_OFFSET: 0xffffbf3100000000 [ 8.778950] CPU features: 0x0040006,4a80aa38 [ 8.783411] Memory Limit: none [ 8.786389] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 ]---