To run a command as administrator (user "root"), use "sudo ". See "man sudo_root" for details. tx21@ubuntu:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253-tegra (sibet@sibet-DLAP-320D-CFP3) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Nov 3 22:12:20 EDT 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@96088000 [ 0.000000] Found lut_mem2: 00002008@96085000 [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 2053117 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 521725 pages, LIFO batch:31 [ 0.000000] Normal zone: 24008 pages used for memmap [ 0.000000] Normal zone: 1531392 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2020917 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 nv-auto-config video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt rootfs.slot_suffix= tegra_fbmem2=0x800000@0x96088000 lut_mem2=0x2008@0x96085000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 nv-auto-config [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29672(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7269788K/8212468K available (15358K kernel code, 2956K rwdata, 6688K rodata, 8640K init, 612K bss, 189016K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.001233] Console: colour dummy device 80x25 [ 0.001238] console [tty0] enabled [ 0.001241] bootconsole [uart8250] disabled [ 0.001249] kmemleak: Kernel memory leak detector disabled [ 0.001258] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001266] pid_max: default: 32768 minimum: 301 [ 0.001574] Security Framework initialized [ 0.001729] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.001733] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002319] ftrace: allocating 47098 entries in 184 pages [ 0.124551] sched-energy: Sched-energy-costs installed from DT [ 0.124561] ASID allocator initialised with 65536 entries [ 0.159020] tegra-id: chipid=21817. [ 0.159026] tegra-id: opt_subrevision=1. [ 0.159043] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.159051] DTS File Name: /home/sibet/Music/kernel_src/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.159056] DTB Build time: Nov 3 2022 22:03:15 [ 0.206736] CPU1: Booted secondary processor [4e0f0030] [ 0.238151] CPU2: Booted secondary processor [4e0f0030] [ 0.269164] CPU3: Booted secondary processor [411fd073] [ 0.301125] CPU4: Booted secondary processor [411fd073] [ 0.333119] CPU5: Booted secondary processor [411fd073] [ 0.333174] Brought up 6 CPUs [ 0.333177] SMP: Total of 6 processors activated. [ 0.333182] CPU features: detected feature: 32-bit EL0 Support [ 0.335330] CPU: All CPU(s) started at EL2 [ 0.335463] alternatives: patching kernel code [ 0.338283] devtmpfs: initialized [ 0.372791] Initilizing CustomIPI irq domain [ 0.372944] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.372953] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.381627] pinctrl core: initialized pinctrl subsystem [ 0.381866] OS set in device tree is not L4T. [ 0.382029] regulator-dummy: no parameters [ 0.382162] Initializing plugin-manager [ 0.382217] Plugin module not found [ 0.382254] Plugin-manager status disabled [ 0.383771] NET: Registered protocol family 16 [ 0.384676] persistent_ram: found existing invalid buffer, size 524800, start 8429576 [ 0.384761] pstore: using zlib compression [ 0.384773] console [pstore-1] enabled [ 0.384776] pstore: Registered ramoops as persistent store backend [ 0.384780] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.401179] cpuidle: using governor menu [ 0.402689] bpmp: waiting for handshake [ 0.402693] bpmp: handshake completed [ 0.402710] bpmp: synchronizing channels [ 0.402723] bpmp: channels synchronized [ 0.402727] bpmp: mail init ok [ 0.404801] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.404807] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.404811] arm-smmu 12000000.iommu: stage 1 translation [ 0.404814] arm-smmu 12000000.iommu: stage 2 translation [ 0.404817] arm-smmu 12000000.iommu: nested translation [ 0.404823] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.404828] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.404832] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.404837] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.404840] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.406746] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.406762] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.409324] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.410993] Registering BPMP clocks... [ 0.411079] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.411895] Serial: AMBA PL011 UART driver [ 0.413059] tegra_powergate_init: DONE [ 0.413066] DTS File Name: /home/sibet/Music/kernel_src/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.413072] DTB Build time: Nov 3 2022 22:03:15 [ 0.414979] Tegra reboot handler registered. [ 0.416513] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.416578] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.416591] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.416593] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.416596] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.416752] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.416762] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.417087] iommu: Adding device 3460000.sdhci to group 0 [ 0.417811] iommu: Adding device 3400000.sdhci to group 1 [ 0.418940] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.418955] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.419463] iommu: Adding device 3160000.i2c to group 3 [ 0.419931] iommu: Adding device c240000.i2c to group 4 [ 0.420329] iommu: Adding device 3180000.i2c to group 5 [ 0.420675] iommu: Adding device 3190000.i2c to group 6 [ 0.421176] iommu: Adding device 31b0000.i2c to group 7 [ 0.421531] iommu: Adding device 31c0000.i2c to group 8 [ 0.421877] iommu: Adding device c250000.i2c to group 9 [ 0.422258] iommu: Adding device 31e0000.i2c to group 10 [ 0.424082] iommu: Adding device 3210000.spi to group 11 [ 0.424436] iommu: Adding device c260000.spi to group 12 [ 0.424815] iommu: Adding device 3240000.spi to group 13 [ 0.425550] iommu: Adding device 3100000.serial to group 14 [ 0.425897] iommu: Adding device 3110000.serial to group 15 [ 0.426234] iommu: Adding device c280000.serial to group 16 [ 0.426572] iommu: Adding device 3130000.serial to group 17 [ 0.427958] iommu: Adding device 2490000.ether_qos to group 18 [ 0.427969] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.428945] iommu: Adding device b000000.rtcpu to group 19 [ 0.431208] iommu: Adding device 13e10000.host1x to group 20 [ 0.431518] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.431834] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.432132] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.432436] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.432803] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.433114] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.433444] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.433758] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.434226] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.434924] iommu: Adding device 15700000.vi to group 30 [ 0.435285] iommu: Adding device 15600000.isp to group 31 [ 0.435504] iommu: Adding device 15200000.dc_common to group 32 [ 0.435622] platform 15200000.dc_common: OF IOVA linear map 0x96088000 size (0x800000) [ 0.435655] platform 15200000.dc_common: OF IOVA linear map 0x96085000 size (0x2008) [ 0.436174] iommu: Adding device 15210000.nvdisplay to group 33 [ 0.436525] iommu: Adding device 15340000.vic to group 34 [ 0.436755] iommu: Adding device 154c0000.nvenc to group 35 [ 0.436976] iommu: Adding device 15480000.nvdec to group 36 [ 0.437350] iommu: Adding device 15380000.nvjpg to group 37 [ 0.437567] iommu: Adding device 15500000.tsec to group 38 [ 0.437779] iommu: Adding device 15100000.tsecb to group 39 [ 0.438508] iommu: Adding device 15810000.se to group 40 [ 0.438721] iommu: Adding device 15820000.se to group 41 [ 0.438930] iommu: Adding device 15830000.se to group 42 [ 0.439142] iommu: Adding device 15840000.se to group 43 [ 0.440062] iommu: Adding device smmu_test to group 44 [ 0.440661] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c10000 [ 0.440671] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c20000 [ 0.440681] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2c30000 [ 0.440691] mc: mapped MMIO address: 0xffffff800b130000 -> 0x2c40000 [ 0.440700] mc: mapped MMIO address: 0xffffff800b150000 -> 0x2c50000 [ 0.440708] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.440718] mc-err: mcerr ops are set to t18x [ 0.440865] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.442055] iommu: Adding device 3530000.xhci to group 45 [ 0.442071] arm-smmu: forcing sodev map for 3530000.xhci [ 0.442518] iommu: Adding device 3550000.xudc to group 46 [ 0.442529] arm-smmu: forcing sodev map for 3550000.xudc [ 0.443251] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.443257] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.443262] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.443907] iommu: Adding device 17000000.gp10b to group 47 [ 0.444983] tegra-reset 5000000.clock: registered 193 resets. [ 0.447269] iommu: Adding device d000000.bpmp to group 48 [ 0.447466] bpmp: ping status is 0 [ 0.447562] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.449817] bpmp d000000.bpmp: probe ok [ 0.452991] iommu: Adding device 2600000.dma to group 49 [ 0.453924] gpio gpiochip0: gpio-line-names specifies 180 line names but there are 192 lines on the chip [ 0.454409] GPIO line 461 (camera-control-output-high) hogged as output/high [ 0.454440] GPIO line 424 (wifi-enable) hogged as output/high [ 0.454469] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.454499] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.454657] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.458271] gpio gpiochip1: gpio-line-names specifies 60 line names but there are 64 lines on the chip [ 0.458385] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.458526] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.460120] iommu: Adding device 10003000.pcie-controller to group 50 [ 0.460137] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.460469] iommu: Adding device sound to group 51 [ 0.460826] iommu: Adding device 3510000.hda to group 52 [ 0.468307] iommu: Adding device c1a0000.aon to group 53 [ 0.468748] vdd-ac-bat: 5000 mV [ 0.470446] vdd-1v8-ap: 1800 mV [ 0.494253] random: fast init done [ 0.497537] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.500161] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.500356] SCSI subsystem initialized [ 0.500459] libata version 3.00 loaded. [ 0.500612] usbcore: registered new interface driver usbfs [ 0.500643] usbcore: registered new interface driver hub [ 0.500700] usbcore: registered new device driver usb [ 0.503996] GPIO line 241 (touch-rails) hogged as output/high [ 0.504411] GPIO line 242 (touch-rails) hogged as output/high [ 0.504564] gpiochip_setup_dev: registered GPIOs 240 to 255 on device: gpiochip2 (tca9539) [ 0.505925] GPIO line 228 (lcd-bias-rails) hogged as output/high [ 0.506054] gpiochip_setup_dev: registered GPIOs 224 to 239 on device: gpiochip3 (tca9539) [ 0.515825] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.520841] vddio-ddr: at 1125 mV [ 0.524688] avdd_dsi_csi: 1200 mV [ 0.528689] vdd-1v8: 1800 mV [ 0.532689] vdd-3v3-sys: 3300 mV [ 0.533823] spmic-ldo0: at 1800 mV [ 0.534539] spmic-ldo1: at 800 mV [ 0.536689] vddio-3v3: 3300 mV [ 0.537427] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.540690] vdd-rtc: at 800 mV [ 0.541447] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.544689] spmic-ldo6: at 1500 mV [ 0.548689] vdd-pex-1v00: 1000 mV [ 0.549323] dvdd-pex: 1000 mV [ 0.551541] GPIO line 221 (spmic_gpio_input) hogged as input [ 0.551694] GPIO line 222 (spmic_gpio_input) hogged as input [ 0.551839] gpiochip_setup_dev: registered GPIOs 216 to 223 on device: gpiochip4 (max77620-gpio) [ 0.552007] max77620 4-003c: max77620 probe successful [ 0.552390] media: Linux media interface: v0.10 [ 0.552416] Linux video capture interface: v2.00 [ 0.554912] pps_core: LinuxPPS API ver. 1 registered [ 0.554915] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.554928] PTP clock support registered [ 0.555118] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.555321] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.555339] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.556687] trusty trusty: trusty version: Built: 02:25:36 Apr 17 2022 [ 0.556702] trusty trusty: selected api version: 3 (requested 3) [ 0.557526] Advanced Linux Sound Architecture Driver Initialized. [ 0.557845] Bluetooth: Core ver 2.22 [ 0.557871] NET: Registered protocol family 31 [ 0.557874] Bluetooth: HCI device and connection manager initialized [ 0.557882] Bluetooth: HCI socket layer initialized [ 0.557887] Bluetooth: L2CAP socket layer initialized [ 0.557901] Bluetooth: SCO socket layer initialized [ 0.558609] en-vdd-sd: 3300 mV [ 0.559338] en-vdd-cam: 1800 mV [ 0.560697] vdd-hdmi: 5000 mV [ 0.561020] vdd-usb0-5v: 5000 mV [ 0.561333] vdd-usb1-5v: 5000 mV [ 0.564690] en-vdd-ts-1v8: 1800 mV [ 0.568689] en-vdd-ts-hv-3v3: 3300 mV [ 0.569348] en-vdd-disp-3v3: 3300 mV [ 0.570023] en-mdm-pwr-3v7: 3700 mV [ 0.570691] en-vdd-disp-1v8: 1800 mV [ 0.571388] en-vdd-cam-hv-2v8: 2800 mV [ 0.572079] en-vdd-cam-1v2: 1200 mV [ 0.572863] vdd-fan: 5000 mV [ 0.573146] vdd-3v3: 3300 mV [ 0.574054] dis-vdd-1v2: 1200 mV [ 0.574329] en-vdd-vcm-2v8: 2800 mV [ 0.575041] vdd-usb2-5v: 5000 mV [ 0.575323] vdd-sys-bl: 3300 mV [ 0.576044] en-vdd-sys: 1200 mV [ 0.578344] camchar: rtcpu character device driver loaded [ 0.578875] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.580576] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.581569] clocksource: Switched to clocksource arch_sys_counter [ 0.603546] VFS: Disk quotas dquot_6.6.0 [ 0.603619] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.603868] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.604377] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.604484] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.604488] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.604495] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.604499] nvmap_page_pool_init: Total RAM pages: 2005863 [ 0.604502] nvmap_page_pool_init: nvmap page pool size: 250732 pages (979 MB) [ 0.604548] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.605015] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.607119] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.613332] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.613575] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.614014] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.614090] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.614195] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.614297] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.614453] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.614651] la/ptsa driver initialized. [ 0.614660] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.614663] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.614948] NET: Registered protocol family 2 [ 0.615014] IP idents hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.617423] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.617748] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.618339] TCP: Hash tables configured (established 65536 bind 65536) [ 0.618391] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.618505] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.618893] NET: Registered protocol family 1 [ 0.619211] RPC: Registered named UNIX socket transport module. [ 0.619214] RPC: Registered udp transport module. [ 0.619216] RPC: Registered tcp transport module. [ 0.619219] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.619224] PCI: CLS 0 bytes, default 64 [ 0.619334] Trying to unpack rootfs image as initramfs... [ 0.827626] Freeing initrd memory: 7068K [ 0.843113] host1x 13e10000.host1x: initialized [ 0.844479] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.846571] audit: initializing netlink subsys (disabled) [ 0.846596] audit: type=2000 audit(0.740:1): initialized [ 0.847000] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.853612] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.854578] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.855098] 9p: Installing v9fs 9p2000 file system support [ 0.857180] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.857243] io scheduler noop registered [ 0.857455] io scheduler cfq registered (default) [ 0.860696] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.967511] iommu: Adding device aconnect@2a41000:adsp_audio to group 54 [ 1.002702] iommu: Adding device 2993000.adsp to group 55 [ 1.003759] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.006352] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 1.010077] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.011257] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 1.012323] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 1.013371] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.015818] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 1.016775] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 1.017117] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 1.017214] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.017323] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 1.017329] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=2000000, max_bw=4687500 [ 1.019114] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 1.020339] tsec 15500000.tsec: initialized [ 1.021393] tsec 15100000.tsecb: initialized [ 1.024400] nvdec 15480000.nvdec: initialized [ 1.029800] falcon 15340000.vic: initialized [ 1.031168] falcon 154c0000.nvenc: initialized [ 1.032402] falcon 15380000.nvjpg: initialized [ 1.034521] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.036016] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.037650] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.039153] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.040653] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.042182] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.043683] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.045184] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.048420] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.048427] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.048452] tegradccommon 15200000.dc_common: dma mapping done [ 1.048628] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=391 [ 1.048698] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.048900] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.048914] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.049063] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.049066] tegra_cec 3960000.tegra_cec: probed [ 1.049139] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 1.049183] generic_infoframe_type: 0x87 [ 1.049275] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.049297] tegradc 15210000.nvdisplay: Display dc.ffffff800b3e0000 registered with id=0 [ 1.057025] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 1.057030] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 1.057032] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 1.057237] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 1.057243] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 1.058571] tegradc 15210000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.061411] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.061415] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.063913] tegradc 15210000.nvdisplay: probed [ 1.065093] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.065893] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.065922] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.066353] kfuse 3830000.kfuse: initialized [ 1.067736] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.070665] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.073085] console [ttyS0] disabled [ 1.073125] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 1.073170] console [ttyS0] enabled [ 1.074501] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 1.075419] Console: switching to colour frame buffer device 240x67 [ 1.075494] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 1.075515] tegradc 15210000.nvdisplay: fb registered [ 1.075672] serial-tegra 3130000.serial: RX in PIO mode [ 1.075761] gpio tegra-gpio wake21 for gpio=121(P:1) [ 1.076337] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.076438] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.076689] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.076732] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 1.077847] [drm] Initialized [ 1.084356] Parent Clock set for DC plld2 [ 1.084904] brd: module loaded [ 1.088545] loop: module loaded [ 1.088595] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.088673] tegra_profiler: auth: init [ 1.088997] nct1008_nct72 7-004c: starting parse dt [ 1.089102] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 1.089108] nct1008_nct72 7-004c: success parsing dt [ 1.089213] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 1.089598] THERMAL EST: found 3 subdevs [ 1.089602] THERMAL EST num_resources: 0 [ 1.089606] [THERMAL EST subdev 0] [ 1.089610] [THERMAL EST subdev 1] [ 1.089614] [THERMAL EST subdev 2] [ 1.089870] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 1.089872] THERMAL EST: thz register success. [ 1.089968] THERMAL EST: end of probe, return err: 0 [ 1.090602] sd: No Scsi addr parsed to reserve index [ 1.090624] hisi_sas: driver version v1.6 [ 1.100604] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 1.100611] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 1.101367] scsi host0: tegra_ahci [ 1.101893] scsi host1: tegra_ahci [ 1.102113] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 1.102117] ata2: DUMMY [ 1.117661] libphy: Fixed MDIO Bus: probed [ 1.118131] tun: Universal TUN/TAP device driver, 1.6 [ 1.118133] tun: (C) 1999-2004 Max Krasnyansky [ 1.118920] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.118924] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.118956] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.118959] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.118993] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.118995] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.119027] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.119029] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.123706] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 1.124052] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 1.125633] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 1.128171] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.128688] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d f 32 e8 [ 1.128720] Using phyrst_lpmode = 0 from DT [ 1.128798] libphy: dwc_phy: probed [ 1.129081] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 1.131104] PPP generic driver version 2.4.2 [ 1.131234] PPP BSD Compression module registered [ 1.131237] PPP Deflate Compression module registered [ 1.131252] PPP MPPE Compression module registered [ 1.131256] NET: Registered protocol family 24 [ 1.131302] usbcore: registered new interface driver r8152 [ 1.131335] usbcore: registered new interface driver asix [ 1.131365] usbcore: registered new interface driver ax88179_178a [ 1.131394] usbcore: registered new interface driver cdc_ether [ 1.131424] usbcore: registered new interface driver net1080 [ 1.131449] usbcore: registered new interface driver cdc_subset [ 1.131472] usbcore: registered new interface driver zaurus [ 1.131508] usbcore: registered new interface driver cdc_ncm [ 1.131622] VFIO - User Level meta-driver version: 0.3 [ 1.132446] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.132457] ehci-pci: EHCI PCI platform driver [ 1.132488] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.132494] ohci-pci: OHCI PCI platform driver [ 1.132523] ohci-platform: OHCI generic platform driver [ 1.137590] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 1.137620] tegradc 15210000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.138569] tegradc 15210000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.138579] tegradc 15210000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.139578] tegra-xusb 3530000.xhci: extcon 0: ffffffc1ead28000 id [ 1.140365] usbcore: registered new interface driver uas [ 1.140402] usbcore: registered new interface driver usb-storage [ 1.140467] usbcore: registered new interface driver usbserial [ 1.141552] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 1.144819] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.145875] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 1.159940] nct1008_nct72 7-004c: initial LOC temp: 36000 [ 1.160247] nct1008_nct72 7-004c: initial EXT temp: 48750 [ 1.160852] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 1.161144] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 1.161332] nct1008_nct72 7-004c: nct1008_probe: initialized [ 1.164712] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.164715] Extcon AUX1(HDMI) enable [ 1.173994] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.174011] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 1.174737] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 1.174765] tegra-xusb 3530000.xhci: irq 71, io mem 0x03530000 [ 1.174910] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.174915] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.174918] usb usb1: Product: xHCI Host Controller [ 1.174922] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.174925] usb usb1: SerialNumber: 3530000.xhci [ 1.175305] hub 1-0:1.0: USB hub found [ 1.175359] hub 1-0:1.0: 4 ports detected [ 1.175702] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.175710] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 1.175835] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.175840] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.175843] usb usb2: Product: xHCI Host Controller [ 1.175846] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.175849] usb usb2: SerialNumber: 3530000.xhci [ 1.176124] hub 2-0:1.0: USB hub found [ 1.176148] hub 2-0:1.0: 3 ports detected [ 1.176590] Wake76 for irq=199 [ 1.176593] Wake77 for irq=199 [ 1.176595] Wake78 for irq=199 [ 1.176597] Wake79 for irq=199 [ 1.176598] Wake80 for irq=199 [ 1.176600] Wake81 for irq=199 [ 1.176602] Wake82 for irq=199 [ 1.176628] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 1.176633] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 1.273715] tegra-usb-cd usb_cd: notification status (0x0, 0x1) [ 1.273719] tegra-usb-cd usb_cd: connected to SDP [ 1.273729] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 1.273888] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 1.274409] mousedev: PS/2 mouse device common for all mice [ 1.274470] usbcore: registered new interface driver xpad [ 1.277813] usb usb2: usb_suspend_both: status 0 [ 1.297355] tegradc 15210000.nvdisplay: blank - powerdown [ 1.337842] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.337844] Extcon AUX1(HDMI) disable [ 1.364924] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 1.365436] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.368752] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.388044] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.397061] Wake73 for irq=42 [ 1.399405] rtc rtc1: alarm rtc device [ 1.399502] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.399669] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.401989] i2c /dev entries driver [ 1.415556] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.416546] ata1: SATA link down (SStatus 0 SControl 300) [ 1.440437] parse_throttle_dt_data: Num cap clks = 4 [ 1.440457] parse_throttle_dt_data: clk=mcpu type=1 [ 1.440463] parse_throttle_dt_data: clk=bcpu type=2 [ 1.440542] parse_throttle_dt_data: clk=gpu type=4 [ 1.440549] parse_throttle_dt_data: clk=emc type=3 [ 1.443850] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.445907] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.450018] FAN dev name: pwm-fan [ 1.450485] FAN:gpio request success. [ 1.450530] FAN: can't find tach_gpio [ 1.450688] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.451966] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 1.451981] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.457406] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.457413] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.457421] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.457424] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.457427] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.457430] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.457432] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.457435] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.457446] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.457450] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.461726] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 1.466154] device-mapper: uevent: version 1.0.3 [ 1.467924] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.470035] CPU EMC frequency mapping table: from device tree [ 1.490541] tegradc 15210000.nvdisplay: unblank [ 1.490733] cpufreq: platform driver Initialization: pass [ 1.491357] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.491417] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.491476] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.491515] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.491599] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.492341] sdhci: Secure Digital Host Controller Interface driver [ 1.492342] sdhci: Copyright(c) Pierre Ossman [ 1.492343] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.492949] Parent Clock set for DC plld2 [ 1.495398] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.496652] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.497281] CMDQ: cmdq_platfm_init successful [ 1.498026] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.498523] CQE: CMD_TIMING bit set for R1B DCMD [ 1.501061] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.504213] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 1.504264] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 1.504898] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 1.506599] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 258 [ 1.511349] tegra-se-nvhost 15810000.se: initialized [ 1.512422] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.513026] tegra-se-nvhost 15820000.se: initialized [ 1.513984] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.514563] tegra-se-nvhost 15830000.se: initialized [ 1.515309] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.515825] tegra-se-nvhost 15840000.se: initialized [ 1.516731] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.517493] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.517655] hidraw: raw HID events driver (C) Jiri Kosina [ 1.519705] usbcore: registered new interface driver usbhid [ 1.519706] usbhid: USB HID core driver [ 1.525320] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 1.527534] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 1.527768] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 1.527885] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 1.528073] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 1.528895] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 1.528988] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 1.529061] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 1.529131] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 1.529266] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 1.529610] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (52) [ 1.529612] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 1.531704] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 1.533273] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.533532] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.533533] Extcon AUX1(HDMI) enable [ 1.533866] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.534248] register_ari_mca_banks: Registered MCA ROC:IOB [ 1.534529] register_ari_mca_banks: Registered MCA ROC:CCE [ 1.535227] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.535229] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 1.535231] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 1.535283] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.535286] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 1.535287] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 1.535338] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.535340] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 1.535341] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 1.535390] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.535392] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 1.535394] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 1.535441] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.535443] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 1.535444] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 1.535494] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.535498] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 1.535500] tegra18-bridge 2100000.axip2p: bridge probed OK [ 1.535547] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.535551] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 1.535552] tegra18-bridge 2110000.axip2p: bridge probed OK [ 1.535600] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.535604] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 1.535605] tegra18-bridge 2120000.axip2p: bridge probed OK [ 1.535672] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.535677] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 1.535678] tegra18-bridge 2130000.axip2p: bridge probed OK [ 1.535728] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.535730] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 1.535732] tegra18-bridge 2140000.axip2p: bridge probed OK [ 1.535781] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.535785] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 1.535787] tegra18-bridge 2150000.axip2p: bridge probed OK [ 1.535837] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.535841] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 1.535843] tegra18-bridge 2160000.axip2p: bridge probed OK [ 1.535891] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.535896] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 1.535898] tegra18-bridge 2170000.axip2p: bridge probed OK [ 1.535946] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.535951] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 1.535952] tegra18-bridge 2180000.axip2p: bridge probed OK [ 1.536008] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.536012] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 1.536014] tegra18-bridge 2190000.axip2p: bridge probed OK [ 1.536072] **** A57 ECC: Enabled [ 1.536074] tegra18_a57_serr_init: on CPU 4 a A57 Core [ 1.536136] tegra18x_actmon d230000.actmon: in actmon_register()... [ 1.536611] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.537057] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 1.537179] denver_knobs_init:MTS_VERSION:55941701 [ 1.539291] nvpmodel: initialized successfully [ 1.540185] trusty-virtio trusty:virtio: initializing [ 1.540283] trusty_ipc virtio0: vring0: va(pa) ffffffc1e504e000(0) qsz 32 notifyid 1 [ 1.540289] trusty_ipc virtio0: vring1: va(pa) ffffffc1e5054000(0) qsz 32 notifyid 2 [ 1.540351] trusty-virtio trusty:virtio: initializing done [ 1.540438] trusty_ipc virtio0: is online [ 1.541558] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.541812] usbcore: registered new interface driver snd-usb-audio [ 1.545759] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.548174] tegradc 15210000.nvdisplay: sync windows ret = 247 [ 1.553943] gpio tegra-gpio wake71 for gpio=125(P:5) [ 1.553992] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.560882] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 1.561015] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 1.566815] OPE platform probe [ 1.566882] OPE platform probe successful [ 1.570760] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.570763] Extcon HDMI: HPD enabled [ 1.570778] tegradc 15210000.nvdisplay: hdmi: plugged [ 1.591202] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.606445] mmc0: periodic cache flush enabled [ 1.606453] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.609543] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.610793] mmcblk0: mmc0:0001 DG4032 29.1 GiB [ 1.614931] mmcblk0boot0: mmc0:0001 DG4032 partition 1 4.00 MiB [ 1.616897] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.616976] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.617042] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.617106] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.617178] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.617243] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.617313] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.617380] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.617445] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.617563] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.617646] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 1.617718] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 1.617786] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 1.617853] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 1.617923] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 1.617989] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 1.618062] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 1.618130] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 1.618198] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 1.618271] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 1.619073] mmcblk0boot1: mmc0:0001 DG4032 partition 2 4.00 MiB [ 1.623212] mmcblk0rpmb: mmc0:0001 DG4032 partition 3 4.00 MiB [ 1.628259] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 1.630987] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 1.630992] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.630995] usb 1-2: Product: USB2.0 Hub [ 1.631782] hub 1-2:1.0: USB hub found [ 1.632047] hub 1-2:1.0: 4 ports detected [ 1.638401] u32 classifier [ 1.638404] Actions configured [ 1.638461] Initializing XFRM netlink socket [ 1.639005] NET: Registered protocol family 10 [ 1.639577] NET: Registered protocol family 17 [ 1.639586] NET: Registered protocol family 15 [ 1.639643] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.639686] Bluetooth: RFCOMM socket layer initialized [ 1.639694] Bluetooth: RFCOMM ver 1.11 [ 1.639698] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.639701] Bluetooth: HIDP socket layer initialized [ 1.639716] 9pnet: Installing 9P2000 support [ 1.639747] Key type dns_resolver registered [ 1.640046] Registered cp15_barrier emulation handler [ 1.640061] Registered setend emulation handler [ 1.640893] registered taskstats version 1 [ 1.644234] isp 15600000.isp: initialized [ 1.648483] nvcsi 150c0000.nvcsi: initialized [ 1.649901] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 1.652579] Wake83 for irq=51 [ 1.652654] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 1.652731] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 1.652805] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 1.652939] input: gpio-keys as /devices/gpio-keys/input/input2 [ 1.654361] tegra-vi4 15700000.vi: initialized [ 1.655232] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound [ 1.655930] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@1/endpoint. [ 1.686644] tegra_rtc c2a0000.rtc: setting system clock to 2022-11-04 02:30:29 UTC (1667529029) [ 1.687655] mmcblk mmc0:0001: Card claimed for testing. [ 1.716124] bpmp: mounted debugfs mirror [ 1.717277] bwmgr: missing cdev-type property [ 1.722290] ALSA device list: [ 1.722294] #0: tegra-hda at 0x3518000 irq 384 [ 1.722295] #1: tegra-snd-t186ref-mobile-rt565x [ 1.724780] Freeing unused kernel memory: 8640K [ 1.746412] Root device found: mmcblk0p1 [ 1.747474] Found dev node: /dev/mmcblk0p1 [ 1.766426] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.768154] Rootfs mounted over mmcblk0p1 [ 1.783266] Switching from initrd to actual rootfs [ 1.787679] mmc1: Applying tuning correction [ 1.787691] mmc1: Tap value after applying correction 64 [ 1.787698] mmc1: hw tuning done ... [ 1.792403] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 1.853655] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.887858] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.896738] cgroup: cgroup2: unknown option "nsdelegate" [ 1.909634] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.910374] systemd[1]: Detected architecture arm64. [ 1.921539] usb 1-2.1: new high-speed USB device number 3 using tegra-xusb [ 1.927271] systemd[1]: No hostname configured. [ 1.927282] systemd[1]: Set hostname to . [ 1.954976] usb 1-2.1: New USB device found, idVendor=0b95, idProduct=772b [ 1.954980] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.954983] usb 1-2.1: Product: AX88772C [ 1.954985] usb 1-2.1: Manufacturer: ASIX Elec. Corp. [ 1.954987] usb 1-2.1: SerialNumber: 000772 [ 2.006402] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.006410] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.053548] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.117843] random: systemd: uninitialized urandom read (16 bytes read) [ 2.117870] systemd[1]: Reached target Swap. [ 2.118072] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 2.118076] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.118156] random: systemd: uninitialized urandom read (16 bytes read) [ 2.119554] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.119601] random: systemd: uninitialized urandom read (16 bytes read) [ 2.120831] systemd[1]: Created slice System Slice. [ 2.121077] systemd[1]: Listening on Journal Socket. [ 2.175490] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.255581] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.257548] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.350244] systemd-journald[2270]: Received request to flush runtime journal from PID 1 [ 2.373595] asix 1-2.1:1.0 eth1: register 'asix' at usb-3530000.xhci-2.1, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:74:d9:50 [ 2.407577] random: crng init done [ 2.407581] random: 7 urandom warning(s) missed due to ratelimiting [ 2.453568] usb 1-2.2: new high-speed USB device number 4 using tegra-xusb [ 2.485373] usb 1-2.2: New USB device found, idVendor=0951, idProduct=1666 [ 2.485379] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.485382] usb 1-2.2: Product: DataTraveler 3.0 [ 2.485385] usb 1-2.2: Manufacturer: Kingston [ 2.485387] usb 1-2.2: SerialNumber: E0D55E629FDEF671C8AB04B1 [ 2.573138] usb-storage 1-2.2:1.0: USB Mass Storage device detected [ 2.576067] scsi host2: usb-storage 1-2.2:1.0 [ 2.661561] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.912956] using random self ethernet address [ 2.917641] using random host ethernet address [ 3.063567] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.219974] ov5693 2-0036: probing v4l2 sensor. [ 3.224975] Mass Storage Function, version: 2009/09/11 [ 3.224979] LUN: removable file: (no medium) [ 3.230063] using random self ethernet address [ 3.230065] using random host ethernet address [ 3.253209] ov5693 2-0036: after read frmfmt [ 3.258955] ov5693 2-0036: parse_dt [ 3.264872] ov5693 2-0036: ov5693_parse_dt:has eeprom value:0 [ 3.282065] ov5693 2-0036: tegracam sensor driver:ov5693_v2.0.6 [ 3.282070] ov5693 2-0036: ov5693_board_setup [ 3.289730] rndis0: HOST MAC c6:9c:4c:03:03:9c [ 3.289753] rndis0: MAC c6:9c:4c:03:03:9d [ 3.293924] usb0: HOST MAC c6:9c:4c:03:03:9e [ 3.293940] usb0: MAC c6:9c:4c:03:03:9f [ 3.293966] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 3.298939] l4tbr0: port 1(rndis0) entered blocking state [ 3.298941] l4tbr0: port 1(rndis0) entered disabled state [ 3.299047] device rndis0 entered promiscuous mode [ 3.304624] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 3.306709] ov5693 2-0036: ov5693_board_setup: start eeprom init [ 3.308811] l4tbr0: port 2(usb0) entered blocking state [ 3.308814] l4tbr0: port 2(usb0) entered disabled state [ 3.308920] device usb0 entered promiscuous mode [ 3.316511] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 3.319045] ov5693 2-0036: before adapter!!!!! [ 3.324899] ov5693 2-0036: after adapter!!!!! [ 3.329904] ov5693 2-0036: before new device!!!!! [ 3.335260] ov5693 2-0036: before new regmap init!!!!! [ 3.340980] ov5693 2-0036: after regmap init!!!!! [ 3.346249] ov5693 2-0036: ov5693_board_setup:eeprom init rst:0 [ 3.353570] ov5693 2-0036: ov5693_power_on: power on [ 3.368097] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 3.369439] bcpu-throttle-alert cooling device registered. [ 3.370132] mcpu-throttle-alert cooling device registered. [ 3.370348] gpu-throttle-alert cooling device registered. [ 3.372707] ov5693 2-0036: ov5693_board_setup:otp init rst:0 [ 3.378450] ov5693 2-0036: read otp bank function [ 3.414430] ov5693 2-0036: ov5693_board_setup:fuse id init rst:0 [ 3.429261] ov5693 2-0036: ov5693_board_setup finish. [ 3.455818] ov5693 2-0036: ov5693_set_group_hold: set_group_hold [ 3.462739] ov5693 2-0036: ov5693_set_gain: gain 0 val: 0 [ 3.463062] ov5693 2-0036: ov5693_set_group_hold: set_group_hold [ 3.469700] ov5693 2-0036: ov5693_set_exposure: val: 2 [ 3.480123] ov5693 2-0036: ov5693_set_group_hold: set_group_hold [ 3.493350] android_work: did not send uevent (0 0 (null)) [ 3.494706] ov5693 2-0036: ov5693_set_exposure_short: val: 0 [ 3.503156] ov5693 2-0036: ov5693_set_group_hold: set_group_hold [ 3.513901] ov5693 2-0036: frame_rate_value:0 [ 3.520546] ov5693 2-0036: ov5693_set_frame_rate: val: 0 [ 3.527420] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.529181] ov5693 2-0036: ov5693_set_group_hold: set_group_hold [ 3.529446] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.537898] ov5693 2-0036: ov5693_fill_string_ctrl: 1 [ 3.544698] ov5693 2-0036: ov5693_fill_string_ctrl: TEGRA_CAMERA_CID_EEPROM_DATA [ 3.557129] ov5693 2-0036: ov5693_fill_string_ctrl: 1 [ 3.566409] android_work: sent uevent USB_STATE=CONNECTED [ 3.569470] dhd_module_init in [ 3.574038] ov5693 2-0036: ov5693_fill_string_ctrl: 2 [ 3.575740] found wifi platform device bcmdhd_wlan [ 3.583453] ov5693 2-0036: ov5693_fill_string_ctrl: 1 [ 3.585002] wifi_platform_get_country_code_map: could not get country_code_map [ 3.585006] wifi_plat_dev_drv_probe:platform country code map is not available [ 3.585021] Power-up adapter 'DHD generic adapter' [ 3.585029] wifi_platform_set_power = 1 [ 3.589576] ov5693 2-0036: ov5693_set_group_hold: set_group_hold [ 3.595776] ov5693 2-0036: ov5693_set_gain: gain 16 val: 10 [ 3.597175] ov5693 2-0036: ov5693_set_group_hold: set_group_hold [ 3.603461] ov5693 2-0036: ov5693_set_exposure: val: 3 [ 3.606276] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6 [ 3.609631] sd 2:0:0:0: [sda] 60437492 512-byte logical blocks: (30.9 GB/28.8 GiB) [ 3.609919] sd 2:0:0:0: [sda] Write Protect is off [ 3.609922] sd 2:0:0:0: [sda] Mode Sense: 4f 00 00 00 [ 3.610201] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.614410] sda: sda1 [ 3.619244] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 3.621465] android_work: sent uevent USB_STATE=DISCONNECTED [ 3.677623] ov5693 2-0036: ov5693_set_group_hold: set_group_hold [ 3.693572] ov5693 2-0036: ov5693_set_exposure_short: val: 3 [ 3.718498] android_work: sent uevent USB_STATE=CONNECTED [ 3.723400] configfs-gadget gadget: high-speed config #1: c [ 3.723426] tegra-xudc-new 3550000.xudc: ep 5 (type: 3, dir: in) enabled [ 3.723442] tegra-xudc-new 3550000.xudc: ep 3 (type: 2, dir: in) enabled [ 3.723457] tegra-xudc-new 3550000.xudc: ep 2 (type: 2, dir: out) enabled [ 3.723535] tegra-xudc-new 3550000.xudc: ep 9 (type: 3, dir: in) enabled [ 3.723550] tegra-xudc-new 3550000.xudc: ep 7 (type: 2, dir: in) enabled [ 3.723564] tegra-xudc-new 3550000.xudc: ep 4 (type: 2, dir: out) enabled [ 3.723595] tegra-xudc-new 3550000.xudc: ep 15 (type: 3, dir: in) enabled [ 3.723677] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 3.723785] android_work: sent uevent USB_STATE=CONFIGURED [ 3.723824] tegra-xudc-new 3550000.xudc: ep 11 (type: 2, dir: in) enabled [ 3.723839] tegra-xudc-new 3550000.xudc: ep 6 (type: 2, dir: out) enabled [ 3.724974] ov5693 2-0036: ov5693_set_group_hold: set_group_hold [ 3.735896] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 3.735912] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 3.736064] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 3.737487] tegra-xudc-new 3550000.xudc: ep 13 disabled [ 3.737604] tegra-xudc-new 3550000.xudc: ep 8 disabled [ 3.738501] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.738796] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.740380] ov5693 2-0036: frame_rate_value:2545755 [ 3.754776] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 3.754791] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 3.757721] ov5693 2-0036: ov5693_set_frame_rate: val: 22837 [ 3.782734] ov5693 2-0036: Detected OV5693 sensor [ 3.789618] wifi_platform_bus_enumerate device present 1 [ 3.807828] wifi_platform_bus_enumerate device present 0 [ 3.813003] F1 signature read @0x18000000=0x17214354 [ 3.819410] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 3.820262] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 3.820368] wifi_platform_get_mac_addr [ 3.824870] ids dhd_log_netlink_init [ 3.826572] wl_create_event_handler(): thread:wl_event_handler:11b7 started [ 3.826576] wl_event_handler : [ 3.826580] tsk Enter, tsk = 0xffffffc1df6c1a90 [ 3.833123] dhd_attach(): thread:dhd_watchdog_thread:11b9 started [ 3.837491] dhd_attach(): thread:dhd_dpc:11bc started [ 3.839273] dhd_attach(): thread:dhd_rxf:11bd started [ 3.839284] dhd_deferred_work_init: work queue initialized [ 3.839990] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 3.840363] Register interface [wlan0] MAC: 48:b0:2d:0f:32:e6 [ 3.840368] dhd_prot_ioctl : bus is down. we have nothing to do [ 3.840525] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 64 [ 3.842733] wifi_platform_set_power = 0 [ 7.367584] l4tbr0: port 2(usb0) entered blocking state [ 7.367590] l4tbr0: port 2(usb0) entered forwarding state [ 7.367614] l4tbr0: port 1(rndis0) entered blocking state [ 7.367618] l4tbr0: port 1(rndis0) entered forwarding state [ 7.367669] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 7.367681] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 10.423395] Please wait for auto system configuration setup to complete... [ 11.680664] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.758359] gpio tegra-gpio wake18 for gpio=101(M:5) [ 11.760405] net eth0: get_configure_l3v4_filter --> [ 11.760804] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.768932] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 11.769644] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 11.794815] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 11.794928] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 11.794936] wl_android_wifi_on in [ 11.794940] wifi_platform_set_power = 1 [ 12.149939] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 64 [ 12.150451] F1 signature read @0x18000000=0x17214354 [ 12.154816] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 12.155429] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 12.224174] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 12.288552] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 12.288807] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 12.288867] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 12.288869] Enabling wake69 [ 12.289651] wifi_platform_get_mac_addr [ 12.291583] Firmware up: op_mode=0x0005, MAC=48:b0:2d:0f:32:e6 [ 12.295790] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ 12.295821] Skipping the clm download. len:0 memblk: (null) [ 12.298018] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 12.302784] Firmware version = wl0: Jul 21 2020 16:35:45 version 7.35.349.94 (r726700 CY) FWID 01-aa356e32 [ 12.305027] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 13.738734] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : [ 13.738738] P2P interface registered [ 13.746848] WLC_E_IF: NO_IF set, event Ignored [ 13.758509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 15.946354] tegradc 15210000.nvdisplay: unblank [ 17.083737] fuse init (API version 7.26) [ 17.770821] tegradc 15210000.nvdisplay: unblank [ 31.813674] spmic-ldo0: disabling [ 31.813859] spmic-ldo1: disabling [ 31.814002] en-vdd-sd: disabling [ 31.814005] vdd-usb0-5v: disabling [ 31.814007] vdd-usb1-5v: disabling [ 31.814010] en-vdd-disp-3v3: disabling [ 31.814012] en-mdm-pwr-3v7: disabling [ 31.814014] en-vdd-disp-1v8: disabling [ 31.814016] en-vdd-cam-1v2: disabling [ 31.814018] vdd-fan: disabling [ 31.814020] vdd-3v3: disabling [ 31.814022] en-vdd-vcm-2v8: disabling [ 31.814025] vdd-sys-bl: disabling [ 31.814026] en-vdd-sys: disabling [ 176.256264] tegradc 15210000.nvdisplay: blank - powerdown [ 176.315150] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 176.315151] Extcon AUX1(HDMI) disable [ 176.336821] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 176.336899] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 176.337370] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 176.344554] tegradc 15210000.nvdisplay: blank - powerdown [ 176.344575] tegradc 15210000.nvdisplay: unblank [ 176.345185] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 176.345266] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 176.345346] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 176.346659] Parent Clock set for DC plld2 [ 176.349897] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 176.351142] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 176.389593] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 176.389596] Extcon AUX1(HDMI) enable [ 176.401282] tegradc 15210000.nvdisplay: sync windows ret = 247 [ 180.293105] l4tbr0: port 2(usb0) entered disabled state [ 180.293165] l4tbr0: port 1(rndis0) entered disabled state [ 181.201245] Bridge firewalling registered [ 181.246066] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 181.776322] Netfilter messages via NETLINK v0.30. [ 181.781079] ctnetlink v0.93: registering with nfnetlink. [ 182.026138] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 184.358798] CPU1: shutdown [ 184.363077] psci: CPU1 killed (polled 0 ms) [ 184.453195] CPU2: shutdown [ 184.457236] psci: CPU2 killed (polled 0 ms) [ 186.219718] zram: Added device: zram0 [ 186.220030] zram: Added device: zram1 [ 186.222461] zram: Added device: zram2 [ 186.222774] zram: Added device: zram3 [ 186.260485] zram0: detected capacity change from 0 to 1029013504 [ 186.305769] Adding 1004892k swap on /dev/zram0. Priority:5 extents:1 across:1004892k SS [ 186.310209] zram1: detected capacity change from 0 to 1029013504 [ 186.320904] Adding 1004892k swap on /dev/zram1. Priority:5 extents:1 across:1004892k SS [ 186.324861] zram2: detected capacity change from 0 to 1029013504 [ 186.353458] Adding 1004892k swap on /dev/zram2. Priority:5 extents:1 across:1004892k SS [ 186.362688] zram3: detected capacity change from 0 to 1029013504 [ 186.379314] Adding 1004892k swap on /dev/zram3. Priority:5 extents:1 across:1004892k SS [ 186.729018] tegra-xudc-new 3550000.xudc: ep 3 disabled [ 186.729096] tegra-xudc-new 3550000.xudc: ep 2 disabled [ 186.729111] tegra-xudc-new 3550000.xudc: ep 5 disabled [ 186.729201] tegra-xudc-new 3550000.xudc: ep 4 disabled [ 186.729214] tegra-xudc-new 3550000.xudc: ep 7 disabled [ 186.729247] tegra-xudc-new 3550000.xudc: ep 9 disabled [ 186.729271] tegra-xudc-new 3550000.xudc: ep 13 disabled [ 186.729361] tegra-xudc-new 3550000.xudc: ep 8 disabled [ 186.729375] tegra-xudc-new 3550000.xudc: ep 15 disabled [ 186.729414] android_work: sent uevent USB_STATE=DISCONNECTED [ 186.729504] tegra-xudc-new 3550000.xudc: ep 11 disabled [ 186.729519] tegra-xudc-new 3550000.xudc: ep 6 disabled [ 186.730467] tegra-xudc-new 3550000.xudc: ep 0 disabled [ 186.760585] device usb0 left promiscuous mode [ 186.760591] l4tbr0: port 2(usb0) entered disabled state [ 186.846704] device rndis0 left promiscuous mode [ 186.846711] l4tbr0: port 1(rndis0) entered disabled state [ 188.721196] tegradc 15210000.nvdisplay: unblank [ 190.941007] using random self ethernet address [ 190.945636] using random host ethernet address [ 191.205621] Mass Storage Function, version: 2009/09/11 [ 191.205627] LUN: removable file: (no medium) [ 191.210287] using random self ethernet address [ 191.214910] using random host ethernet address [ 191.240144] rndis0: HOST MAC c6:9c:4c:03:03:9c [ 191.249812] rndis0: MAC c6:9c:4c:03:03:9d [ 191.257742] usb0: HOST MAC c6:9c:4c:03:03:9e [ 191.258043] usb0: MAC c6:9c:4c:03:03:9f [ 191.258080] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 191.258169] android_work: did not send uevent (0 0 (null)) [ 191.266701] l4tbr0: port 1(rndis0) entered blocking state [ 191.266706] l4tbr0: port 1(rndis0) entered disabled state [ 191.267633] device rndis0 entered promiscuous mode [ 191.276465] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 191.281665] l4tbr0: port 2(usb0) entered blocking state [ 191.281669] l4tbr0: port 2(usb0) entered disabled state [ 191.282302] device usb0 entered promiscuous mode [ 191.298606] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 191.455863] android_work: did not send uevent (0 0 (null)) [ 191.528925] android_work: sent uevent USB_STATE=CONNECTED [ 191.583936] android_work: sent uevent USB_STATE=DISCONNECTED [ 191.676851] android_work: sent uevent USB_STATE=CONNECTED [ 191.681604] configfs-gadget gadget: high-speed config #1: c [ 191.681638] tegra-xudc-new 3550000.xudc: ep 5 (type: 3, dir: in) enabled [ 191.681654] tegra-xudc-new 3550000.xudc: ep 3 (type: 2, dir: in) enabled [ 191.681670] tegra-xudc-new 3550000.xudc: ep 2 (type: 2, dir: out) enabled [ 191.681742] tegra-xudc-new 3550000.xudc: ep 9 (type: 3, dir: in) enabled [ 191.681758] tegra-xudc-new 3550000.xudc: ep 7 (type: 2, dir: in) enabled [ 191.681773] tegra-xudc-new 3550000.xudc: ep 4 (type: 2, dir: out) enabled [ 191.681804] tegra-xudc-new 3550000.xudc: ep 15 (type: 3, dir: in) enabled [ 191.681822] tegra-xudc-new 3550000.xudc: ep 11 (type: 2, dir: in) enabled [ 191.681842] tegra-xudc-new 3550000.xudc: ep 6 (type: 2, dir: out) enabled [ 191.681878] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 191.682073] android_work: sent uevent USB_STATE=CONFIGURED [ 191.685984] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 191.686002] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 191.686123] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 191.687032] tegra-xudc-new 3550000.xudc: ep 13 disabled [ 191.687128] tegra-xudc-new 3550000.xudc: ep 8 disabled [ 191.704834] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 191.704852] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 195.737475] l4tbr0: port 2(usb0) entered blocking state [ 195.737481] l4tbr0: port 2(usb0) entered forwarding state [ 195.737544] l4tbr0: port 1(rndis0) entered blocking state [ 195.737548] l4tbr0: port 1(rndis0) entered forwarding state [ 195.737621] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 195.737634] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 205.490930] usb 1-2.3: new high-speed USB device number 5 using tegra-xusb [ 205.511856] usb 1-2.3: New USB device found, idVendor=1a40, idProduct=0101 [ 205.511882] usb 1-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 205.511898] usb 1-2.3: Product: USB2.0 HUB [ 205.513868] hub 1-2.3:1.0: USB hub found [ 205.514056] hub 1-2.3:1.0: 4 ports detected [ 205.802894] usb 1-2.3.1: new full-speed USB device number 6 using tegra-xusb [ 205.827544] usb 1-2.3.1: New USB device found, idVendor=0b95, idProduct=6804 [ 205.827570] usb 1-2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 205.827586] usb 1-2.3.1: Product: AX68004 [ 205.827600] usb 1-2.3.1: Manufacturer: ASIX Electronics [ 205.827612] usb 1-2.3.1: SerialNumber: 00000001 [ 205.829257] hub 1-2.3.1:1.0: USB hub found [ 205.829663] hub 1-2.3.1:1.0: 7 ports detected [ 205.910922] usb 1-2.3.4: new full-speed USB device number 7 using tegra-xusb [ 205.932436] usb 1-2.3.4: New USB device found, idVendor=1a86, idProduct=7523 [ 205.932461] usb 1-2.3.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 205.932476] usb 1-2.3.4: Product: USB Serial [ 205.972557] usbcore: registered new interface driver ch341 [ 205.972602] usbserial: USB Serial support registered for ch341-uart [ 205.972645] ch341 1-2.3.4:1.0: ch341-uart converter detected [ 205.973918] usb 1-2.3.4: ch341-uart converter now attached to ttyUSB0 [ 206.118907] usb 1-2.3.1.1: new full-speed USB device number 8 using tegra-xusb [ 206.151870] usb 1-2.3.1.1: New USB device found, idVendor=046d, idProduct=c534 [ 206.151879] usb 1-2.3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 206.151883] usb 1-2.3.1.1: Product: USB Receiver [ 206.151887] usb 1-2.3.1.1: Manufacturer: Logitech [ 206.159290] input: Logitech USB Receiver as /devices/3530000.xhci/usb1/1-2/1-2.3/1-2.3.1/1-2.3.1.1/1-2.3.1.1:1.0/0003:046D:C534.0001/input/input3 [ 206.220259] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3530000.xhci-2.3.1.1/input0 [ 206.224921] input: Logitech USB Receiver as /devices/3530000.xhci/usb1/1-2/1-2.3/1-2.3.1/1-2.3.1.1/1-2.3.1.1:1.1/0003:046D:C534.0002/input/input4 [ 206.284315] hid-generic 0003:046D:C534.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3530000.xhci-2.3.1.1/input1 [ 208.295472] tegradc 15210000.nvdisplay: blank - powerdown [ 208.351548] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 208.351552] Extcon AUX1(HDMI) disable [ 208.383993] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 208.384111] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 208.384874] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 208.503874] tegradc 15210000.nvdisplay: blank - powerdown [ 208.503884] tegradc 15210000.nvdisplay: unblank [ 208.504527] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 208.504629] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 208.504713] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 208.506151] Parent Clock set for DC plld2 [ 208.509549] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 208.512889] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 208.550929] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 208.550932] Extcon AUX1(HDMI) enable [ 208.551020] tegradc 15210000.nvdisplay: unblank [ 213.356481] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 213.356492] Bluetooth: BNEP socket layer initialized [ 213.681300] tegradc 15210000.nvdisplay: unblank [ 216.588172] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.