=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2022.11.30 11:27:39 =~=~=~=~=~=~=~=~=~=~=~= ^@^@ÿâ [0039.168] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0039.176] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0039.181] I> Boot-mode: Platform RCM [0039.185] I> Platform: Silicon [0039.187] I> Chip revision : A02P [0039.191] I> Bootrom patch version : 15 (correctly patched) [0039.196] I> ATE fuse revision : 0x200 [0039.199] I> Ram repair fuse : 0x0 [0039.202] I> Ram Code : 0x0 [0039.205] I> rst_source: 0x0, rst_level: 0x0 [0039.210] I> USB configuration success [0041.366] I> mb2 image downloaded [0041.402] I> Recovery boot mode 0 [0041.408] I> UPHY full init done [0041.415] I> MB1 done [0041.420] I> Welcome to MB2(TBoot-BPMP) Applet (version: default.t194-mobile-27d8d121) [0041.427] I> DMA Heap @ [0x40020000 - 0x40065800] [0041.432] I> Default Heap @ [0xd486400 - 0xd48a400] [0041.436] W> Profiler not initialized [0041.516] I> sdmmc DDR50 mode [0041.523] I> QSPI-0l initialized successfully [0041.530] E> CLK_RST: instance 6 not found in module 44. [0041.535] E> MPhy CAR configuration failed error = 1747992077 [0041.541] E> UFS initialization failed [0041.544] I> UFS is not present [0041.550] W> Cannot find any partition table for 00000003 [0041.555] > PARTITION_MANAGER: Failed to publish partition. [0041.563] I> Found 19 partitions in SDMMC_USER (instance 3) [0041.571] I> Found 41 partitions in QSPI_FLASH (instance 0) [0041.576] W> Profiler not initialized [0041.580] I> Entering 3p server [0041.583] I> USB configuration success [0042.597] I> Populate chip info [0042.637] I> Populate eeprom info [0042.641] I> Populate eeprom info for module cvm [0042.646] > DEVICE_PROD: device prod is not initialized. [0042.761] I> Rebooting : reboot-recovery [0042.766] I> Reset to recovery mode ^@ÿâ [0011.261] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0011.269] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0011.274] I> Boot-mode: RCM [0011.277] I> Platform: Silicon [0011.279] I> Chip revision : A02P [0011.283] I> Bootrom patch version : 15 (correctly patched) [0011.288] I> ATE fuse revision : 0x200 [0011.291] I> Ram repair fuse : 0x0 [0011.294] I> Ram Code : 0x0 [0011.297] I> rst_source: 0xb, rst_level: 0x1 [0011.302] I> USB configuration success [0013.434] I> bct_bootrom image downloaded [0013.443] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0013.450] I> Temperature = 44000 [0013.453] W> Skipping boost for clk: BPMP_CPU_NIC [0013.458] W> Skipping boost for clk: BPMP_APB [0013.462] W> Skipping boost for clk: AXI_CBB [0013.466] W> Skipping boost for clk: AON_CPU_NIC [0013.470] W> Skipping boost for clk: CAN1 [0013.474] W> Skipping boost for clk: CAN2 [0013.478] I> Boot-device: QSPI (instance: 0) [0013.482] I> Qspi flash params source = mb1bct [0013.486] I> bct_mb1 image downloaded [0013.496] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0013.503] W> Thermal config not found in BCT [0013.512] W> MEMIO rail config not found in BCT [0013.522] I> bct_mem image downloaded [0014.764] I> blob image downloaded [0014.805] I> Recovery boot mode 0 [0014.849] W> Platform config not found in BCT [0014.882] I> MB1 done ^@ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0014.892] I> Welcome to MB2(TBoot-BPMP) Recovery (version: default.t194-mobile-7bfb41b2) [0014.893] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0014.894] I> Default Heap @ [0xd486400 - 0xd48a400] [0014.896] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0014.901] W> device prod register failed [0014.916] I> Relocating BR-BCT [0014.917] > DEVICE_PROD: device prod is not initialized. [0014.973] I> Relocating OP-TEE dtb from: 0x6bfffc10 to 0x70050000, size: 1008 [0014.973] I> [0] START: 0x80000000, SIZE: 0x47cf0000 [0014.974] I> [1] START: 0xca000000, SIZE: 0x800000 [0014.974] I> dram_block larger than 80000000 [0014.975] I> [2] START: 0x100000000, SIZE: 0x180000000 [0014.979] I> Setting NS memory ranges to OP-TEE dtb finished. [0014.982] I> found decompressor handler: lz4 [0015.254] I> EKB detected (length: 0x410) @ VA:0x526fa200 [0015.255] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/TC: Non-securÿâclk_early initialized ÿäe exÿâmail_early initialized ÿäteÿâfuse initialized hwwdt initialized ÿärnalÿât194_ec_get_ec_list: found 45 ecs ÿä DT found ÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäÿâadc initialized fmon_populate_monitors: found 73 monitors fmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized ÿäI/TC: OP-TEE version: 3.ÿâclk_dt initialized ÿä1ÿâtj_init initialized ÿä6ÿâ/uphy is not enabled status = disabled uphy_dt initialized uphy_mrq initialized uphy initialized ÿä (gcÿâec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 03:23:20 UTC 2022 aarch64 I/TC: WARNING: Thisÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿäOÿâpm_post initialized dbells initialized dmce initialized cvc initialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late initialized regulator_post initialized rm initialized console_late initialized clk_dt_post initialized mc_reg initialized pg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0015.886] I> Welcome to TBoot-CPU Recovery [0015.887] I> Heap: [0xa0f00000 ... 0xa9f00000 [0015.887] I> gpio framework initialized [0015.901] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0015.912] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0015.912] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0015.922] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0015.930] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0015.931] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0015.931] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0015.938] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0015.945] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0015.946] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0015.956] I> fixed regulator driver initialized [0016.126] I> CPU: Nvidia Carmel [0016.126] I> CPU: MIDR: 0x4e0f0040, MPIDR: 0x80000000 [0016.127] I> Platform: Silicon [0016.127] I> chip revision : A02P [0016.127] I> Boot_device: QSPI_FLASH instance: 0 [0016.127] I> qspi flash-0 params source = boot args [0016.129] I> QSPI source rate = 204000 Khz [0016.129] I> Requested rate for QSPI clock = 12000 Khz [0016.133] I> BPMP-set rate for QSPI clk = 12000 Khz [0016.138] I> QSPI-0l initialized successfully [0016.142] I> sdmmc-3 params source = safe params [0016.566] I> sdmmc DDR50 mode [0016.588] I> Found 41 partitions in QSPI_FLASH (instance 0) [0016.605] W> Cannot find any partition table for 00000003 [0016.606] > PARTITION_MANAGER: Failed to publish partition. [0016.619] I> Found 19 partitions in SDMMC_USER (instance 3) [0016.619] I> Recovery boot_type: 0 [0016.620] I> Entering 3p server [0016.620] I> USB configuration success [0016.824] I> Populate storage info [0016.868] I> Erasing device 3: 0 [0016.869] I> QSPI: Erasing entire device [0131.878] I> Writing device 3: 0. [0132.116] I> Found 41 partitions in QSPI_FLASH (instance 0) [0132.117] I> Erasing device 1: 3 [0132.873] I> Writing device 1: 3. [0132.881] I> Writing device 1: 3. [0132.901] I> Found 19 partitions in SDMMC_USER (instance 3) [0132.902] I> Writing device 1: 3. [0132.922] I> Found 19 partitions in SDMMC_USER (instance 3) [0132.923] I> Writing mb1 partition. [0136.245] I> Writing mb1_b partition. [0139.560] I> Writing spe-fw partition. [0140.826] I> Writing mb2 partition. [0143.587] I> Writing mts-preboot partition. [0143.909] I> Writing mts-mce partition. [0145.841] I> Writing mts-proper partition. [0191.330] I> Writing sc7 partition. [0192.066] I> Writing xusb-fw partition. [0193.835] I> Writing cpu-bootloader partition. [0235.588] I> Writing bootloader-dtb partition. [0240.106] I> Writing secure-os partition. [0251.803] I> Writing eks partition. [0251.880] I> Writing adsp-fw partition. [0257.150] I> Writing rce-fw partition. [0264.430] I> Writing bpmp-fw partition. [0277.791] I> Writing bpmp-fw-dtb partition. [0278.276] I> Writing spe-fw_b partition. [0279.540] I> Writing mb2_b partition. [0282.298] I> Writing mts-preboot_b partition. [0282.621] I> Writing mts-mce_b partition. [0284.552] I> Writing mts-proper_b partition. [0330.037] I> Writing sc7_b partition. [0330.773] I> Writing xusb-fw_b partition. [0332.539] I> Writing cpu-bootloader_b partition. [0374.300] I> Writing bootloader-dtb_b partition. [0378.815] I> Writing VER_b partition. [0378.824] I> Writing VER partition. [0378.833] I> Writing device 1: 3. [0378.841] I> Writing APP partition. [0631.612] I> Writing kernel partition. [0633.414] I> Writing kernel-dtb partition. [0633.447] I> Writing secure-os_b partition. [0633.500] I> Writing eks_b partition. [0633.521] I> Writing adsp-fw_b partition. [0633.556] I> Writing rce-fw_b partition. [0633.607] I> Writing bpmp-fw_b partition. [0633.666] I> Writing bpmp-fw-dtb_b partition. [0633.687] I> Writing kernel_b partition. [0635.480] I> Writing kernel-dtb_b partition. [0635.512] I> Writing recovery partition. [0637.499] I> Writing recovery-dtb partition. [0637.531] I> Writing esp partition. [0640.456] I> Writing secondary_gpt_backup partition. [0640.719] I> Writing BCT partition. [0640.967] I> Writing BCT-boot-chain_backup partition. [0641.444] I> Writing MB1_BCT partition. [0641.888] I> Writing MB1_BCT_b partition. [0642.335] I> Writing MEM_BCT partition. [0645.003] I> Writing MEM_BCT_b partition. [0647.723] I> Rebooting : reset-coldboot ÿäÿâShutdown state requested 1 Rebooting system ... ^@ÿâ [0000.024] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.032] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.055] I> Ram repair fuse : 0x0 [0000.058] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.077] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.093] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 51500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.905] I> MB1 done ^@ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.355] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.356] I> Active Boot chain : 0 [0002.027] I> Relocating BR-BCT [0002.029] > DEVICE_PROD: device prod is not initialized. [0002.335] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.336] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.336] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.337] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.337] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.337] I> dram_block larger than 80000000 [0002.340] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.351] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.355] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.585] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäalÿâadc initialized ÿä ÿâfmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aÿâclk_dt_late initialized ÿäuÿânoc_late initialized pm_post initialized dbells initialized ÿäg 1ÿâdmce initialized ÿä1ÿâcvc initialized ÿä 03:23:20 UTÿâavfs_clk_mach_post initialized ÿäC 202ÿâavfs_clk_platform_post initialized ÿä2 ÿâcvc_late initialized regulator_post initialized ÿäaarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNIÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäNG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.204] I> Welcome to NVDisp-Init [0003.204] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.205] I> 0) Base:0x00000000 Size:0x00000000 [0003.205] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.206] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.213] I> 5) Base:0xc8100000 Size:0x00100000 [0003.217] I> 6) Base:0xc9400000 Size:0x00400000 [0003.222] I> 7) Base:0xc9000000 Size:0x00400000 [0003.226] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.235] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.244] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.253] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.262] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.271] I> 18) Base:0x4004c000 Size:0x00002000 [0003.275] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.280] I> 20) Base:0x4004e000 Size:0x00002000 [0003.284] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.293] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.302] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.311] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.320] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.329] I> 31) Base:0x00000000 Size:0x00000000 [0003.333] I> 32) Base:0xf8000000 Size:0x08000000 [0003.338] I> 33) Base:0xce000000 Size:0x2a000000 [0003.342] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.351] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.360] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.369] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.378] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.387] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.396] GIC-SPI Target CPU: 0 [0003.399] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.407] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.417] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.424] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.429] initializing platform [0003.432] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.437] W> device prod register failed [0003.441] I> Bl_dtb @0xadf00000 [0003.444] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.488] I> Boot_device: QSPI_FLASH instance: 0 [0003.493] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.519] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.530] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.538] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.545] E> Failed to get board id info! [0003.551] I> sdmmc-3 params source = safe params [0003.558] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.564] E> Failed to publish 00000003 [0003.569] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.645] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 3840, height = 2160, frequency = 594000000 [0003.647] I> width = 3840, height = 2160, frequency = 297000000 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1920, height = 1080, frequency = 148351648 [0003.652] I> width = 1920, height = 1080, frequency = 74175824 [0003.658] I> width = 1920, height = 1080, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 720, height = 480, frequency = 26973026 [0003.674] I> width = 720, height = 480, frequency = 26973026 [0003.680] I> width = 640, height = 480, frequency = 25174825 [0003.685] I> width = 3840, height = 2160, frequency = 593406593 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.726] I> hdmi_enable, starting HDMI initialisation [0003.730] I> hdmi_enable, HDMI initialisation complete [0003.740] initializing target [0003.740] calling apps_init() [0003.741] starting app kernel_boot_app [0003.742] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) ^[[2J^[[04D^[[=3h^[[2J^[[09D ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104 (root@frank-desktop) (aarch64-linux-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #3 SMP PREEMPT Wed Nov 30 10:34:26 CST 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589c0000 MEMATTR=0x25943e018 ESRT=0x257e7ec98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x0000000257e7ec98 to 0x0000000257e7ecd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000257bf6fff] [ 0.000000] node 0: [mem 0x0000000257bf7000-0x0000000257d8dfff] [ 0.000000] node 0: [mem 0x0000000257d8e000-0x0000000257e3ffff] [ 0.000000] node 0: [mem 0x0000000257e40000-0x0000000257e6ffff] [ 0.000000] node 0: [mem 0x0000000257e70000-0x0000000257ffffff] [ 0.000000] node 0: [mem 0x0000000258000000-0x000000025886ffff] [ 0.000000] node 0: [mem 0x0000000258870000-0x00000002589affff] [ 0.000000] node 0: [mem 0x00000002589b0000-0x00000002589cffff] [ 0.000000] node 0: [mem 0x00000002589d0000-0x000000025922ffff] [ 0.000000] node 0: [mem 0x0000000259230000-0x000000025939ffff] [ 0.000000] node 0: [mem 0x00000002593a0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933636K/7473852K available (18112K kernel code, 3170K rwdata, 7128K rodata, 3968K init, 1093K bss, 474680K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000718] Console: colour dummy device 80x25 [ 0.002132] printk: console [tty0] enabled [ 0.002191] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002227] pid_max: default: 32768 minimum: 301 [ 0.002382] LSM: Security Framework initializing [ 0.002436] Yama: becoming mindful. [ 0.002483] SELinux: Initializing. [ 0.002620] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002659] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005634] rcu: Hierarchical SRCU implementation. [ 0.005865] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006515] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006569] DTB Build time: Nov 30 2022 10:34:23 [ 0.009175] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009412] Remapping and enabling EFI services. [ 0.011250] smp: Bringing up secondary CPUs ... [ 0.040432] Detected PIPT I-cache on CPU1 [ 0.040504] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070017] Detected PIPT I-cache on CPU2 [ 0.070112] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.099722] Detected PIPT I-cache on CPU3 [ 0.099807] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.129608] Detected PIPT I-cache on CPU4 [ 0.129699] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.159733] Detected PIPT I-cache on CPU5 [ 0.159817] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160223] smp: Brought up 1 node, 6 CPUs [ 0.160393] SMP: Total of 6 processors activated. [ 0.160444] CPU features: detected: Privileged Access Never [ 0.160481] CPU features: detected: LSE atomic instructions [ 0.160495] CPU features: detected: User Access Override [ 0.160509] CPU features: detected: 32-bit EL0 Support [ 0.160521] CPU features: detected: RAS Extension Support [ 0.160533] CPU features: detected: CRC32 instructions [ 0.160547] CPU features: detected: 32-bit EL1 Support [ 0.227117] CPU: All CPU(s) started at EL2 [ 0.233915] devtmpfs: initialized [ 0.274215] Registered cp15_barrier emulation handler [ 0.274336] Registered setend emulation handler [ 0.274356] KASLR enabled [ 0.274633] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.274656] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.275880] pinctrl core: initialized pinctrl subsystem [ 0.277038] SMBIOS 3.0.0 present. [ 0.277067] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.277613] NET: Registered protocol family 16 [ 0.279458] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.279955] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.280630] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.280687] audit: initializing netlink subsys (disabled) [ 0.280992] audit: type=2000 audit(0.276:1): state=initialized audit_enabled=0 res=1 [ 0.281471] thermal_sys: Registered thermal governor 'step_wise' [ 0.281482] thermal_sys: Registered thermal governor 'power_allocator' [ 0.281497] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.283933] cpuidle: using governor menu [ 0.284235] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.284660] ASID allocator initialised with 32768 entries [ 0.284890] Serial: AMBA PL011 UART driver [ 0.288079] Tegra reboot handler registered. [ 0.351241] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.351421] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.351623] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.351673] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.351801] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.351855] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.351960] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.352006] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.352113] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.352160] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.354404] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.354434] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.354513] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.354571] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.354620] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.354647] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.354687] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.354710] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.354733] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.354755] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.354777] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.354798] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.354820] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.354842] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.354865] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.354888] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.354927] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.355048] mc-err: mcerr ops are set to t19x [ 0.367087] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.367111] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.367123] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.367134] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.373385] ACPI: Interpreter disabled. [ 0.374568] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.375715] iommu: Default domain type: Translated [ 0.375775] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.376120] SCSI subsystem initialized [ 0.376270] usbcore: registered new interface driver usbfs [ 0.376309] usbcore: registered new interface driver hub [ 0.376339] usbcore: registered new device driver usb [ 0.376720] mc: Linux media interface: v0.10 [ 0.376750] videodev: Linux video capture interface: v2.00 [ 0.377056] pps_core: LinuxPPS API ver. 1 registered [ 0.377068] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.377087] PTP clock support registered [ 0.377272] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.377556] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.377632] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.378130] Registered efivars operations [ 0.383903] FPGA manager framework [ 0.383981] Advanced Linux Sound Architecture Driver Initialized. [ 0.384542] Bluetooth: Core ver 2.22 [ 0.384579] NET: Registered protocol family 31 [ 0.384589] Bluetooth: HCI device and connection manager initialized [ 0.384608] Bluetooth: HCI socket layer initialized [ 0.384624] Bluetooth: L2CAP socket layer initialized [ 0.384649] Bluetooth: SCO socket layer initialized [ 0.386145] camchar: rtcpu character device driver loaded [ 0.386872] clocksource: Switched to clocksource arch_sys_counter [ 0.704861] VFS: Disk quotas dquot_6.6.0 [ 0.704958] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.705257] pnp: PnP ACPI: disabled [ 0.716270] la/ptsa driver initialized. [ 0.716379] NET: Registered protocol family 2 [ 0.716547] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.721110] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.721224] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.721476] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.721914] TCP: Hash tables configured (established 65536 bind 65536) [ 0.722082] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722183] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722388] NET: Registered protocol family 1 [ 0.723080] RPC: Registered named UNIX socket transport module. [ 0.723111] RPC: Registered udp transport module. [ 0.723124] RPC: Registered tcp transport module. [ 0.723133] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.723185] PCI: CLS 0 bytes, default 64 [ 0.723378] Trying to unpack rootfs image as initramfs... [ 0.910196] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.912235] Freeing initrd memory: 8196K [ 0.916371] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.916404] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.916448] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.916834] kvm [1]: IPA Size Limit: 40 bits [ 0.917313] kvm [1]: vgic interrupt IRQ9 [ 0.917767] kvm [1]: VHE mode initialized successfully [ 0.919245] Initialise system trusted keyrings [ 0.919528] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.924820] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.925604] NFS: Registering the id_resolver key type [ 0.925645] Key type id_resolver registered [ 0.925655] Key type id_legacy registered [ 0.925741] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.925759] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.925786] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.934364] NET: Registered protocol family 38 [ 0.934383] Key type asymmetric registered [ 0.934393] Asymmetric key parser 'x509' registered [ 0.934457] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.934635] io scheduler mq-deadline registered [ 0.934649] io scheduler kyber registered [ 0.939676] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.941814] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.941868] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.941920] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.941969] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.942014] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.945927] scrncapt: init (heads:4 wins:6 planes:4) [ 0.946247] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.946795] EINJ: ACPI disabled. [ 0.949094] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.949114] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.949123] tegra-pmc: ### PMC reset level: L1 [ 0.949132] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.949165] tegra-pmc: PMC Prod config success [ 0.953295] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.957545] random: fast init done [ 0.958032] printk: console [ttyTCU0] enabled [ 2.502774] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.507238] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.511805] arm-smmu 10000000.iommu: stage 1 translation [ 2.517350] arm-smmu 10000000.iommu: stage 2 translation [ 2.523118] arm-smmu 10000000.iommu: nested translation [ 2.528420] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.535301] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.546430] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.548674] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.555258] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.563161] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.568040] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.572739] arm-smmu 12000000.iommu: stage 1 translation [ 2.578549] arm-smmu 12000000.iommu: stage 2 translation [ 2.583675] arm-smmu 12000000.iommu: nested translation [ 2.589385] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.596567] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.607412] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.609395] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.616230] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.623764] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.633408] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.636709] tegra_profiler: auth: init [ 2.640913] THERMAL EST: found 3 subdevs [ 2.644061] THERMAL EST num_resources: 0 [ 2.648157] [THERMAL EST subdev 0] [ 2.651230] [THERMAL EST subdev 1] [ 2.654894] [THERMAL EST subdev 2] [ 2.658126] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.664585] THERMAL EST: thz register success. [ 2.668841] THERMAL EST: end of probe, return err: 0 [ 2.674148] nvsciipc: loaded module [ 2.681166] tun: Universal TUN/TAP device driver, 1.6 [ 2.683536] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.689895] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.695469] e1000e: Intel(R) PRO/1000 Network Driver [ 2.700135] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.706220] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.711769] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.717947] PPP generic driver version 2.4.2 [ 2.722186] PPP BSD Compression module registered [ 2.726746] PPP Deflate Compression module registered [ 2.731766] PPP MPPE Compression module registered [ 2.736745] usbcore: registered new interface driver r8152 [ 2.742516] usbcore: registered new interface driver asix [ 2.747588] usbcore: registered new interface driver ax88179_178a [ 2.753968] usbcore: registered new interface driver cdc_ether [ 2.759947] usbcore: registered new interface driver net1080 [ 2.765519] usbcore: registered new interface driver cdc_subset [ 2.771301] usbcore: registered new interface driver zaurus [ 2.777021] usbcore: registered new interface driver cdc_ncm [ 2.782933] usbcore: registered new interface driver aqc111 [ 2.788355] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.794390] ohci-pci: OHCI PCI platform driver [ 2.798976] ohci-platform: OHCI generic platform driver [ 2.804845] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.815008] usbcore: registered new interface driver uas [ 2.815213] usbcore: registered new interface driver usb-storage [ 2.821447] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.827389] mousedev: PS/2 mouse device common for all mice [ 2.832165] usbcore: registered new interface driver xpad [ 2.840436] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.843110] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.850672] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.857427] i2c /dev entries driver [ 2.860569] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.866615] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.872012] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.877090] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.882798] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.887913] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.893297] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.906560] device-mapper: uevent: version 1.0.3 [ 2.907016] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.914041] cpuidle: Initializing cpuidle driver [ 2.917837] sdhci: Secure Digital Host Controller Interface driver [ 2.922485] sdhci: Copyright(c) Pierre Ossman [ 2.926848] Synopsys Designware Multimedia Card Interface Driver [ 2.932795] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.939042] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.939812] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.952296] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.973142] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.983189] vdd-1v0: supplied by regulator-dummy [ 2.989003] vdd-1v8-hs: supplied by regulator-dummy [ 2.994087] vdd-1v8-ls: supplied by regulator-dummy [ 2.999234] vdd-1v8-ao: supplied by regulator-dummy [ 3.003489] vddio-ddr-1v1: supplied by regulator-dummy [ 3.008554] vdd-rtc: supplied by regulator-dummy [ 3.010601] spmic-ldo1: supplied by regulator-dummy [ 3.012415] vdd-ao-3v3: supplied by regulator-dummy [ 3.019274] vddio-emmc-3v3: supplied by regulator-dummy [ 3.025854] spmic-ldo4: supplied by regulator-dummy [ 3.027739] vdd-usb-3v3: supplied by regulator-dummy [ 3.034554] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.041313] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.047575] spmic-ldo8: supplied by vdd-1v8-ls [ 3.049566] gpio-510 (gpio_default): hogged as output/high [ 3.051499] gpio-511 (gpio_default): hogged as output/high [ 3.054340] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.189843] max77686-rtc max77620-rtc: registered as rtc0 [ 3.191185] max77620-power max20024-power: Event recorder REG_NVERC : 0x79 [ 3.191568] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.880750] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.881756] hid: raw HID events driver (C) Jiri Kosina [ 3.882401] usbcore: registered new interface driver usbhid [ 3.882539] usbhid: USB HID core driver [ 3.884315] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.885345] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.922590] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.998334] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.555 ms) ÿá[ 3.970836] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.971559] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.972542] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.973110] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.974609] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.975232] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.975928] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.977079] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.977388] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.979379] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.986837] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.993194] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.998040] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.004485] denver_knobs_init:MTS_VERSION:55637613 [ 4.016408] t19x_cache tegra-cache: probed [ 4.018539] optee: probing for conduit method. [ 4.019397] optee: revision 3.16 (65cc2218) [ 4.020156] optee: dynamic shared memory is enabled [ 4.025829] optee: initialized driver [ 4.032246] nvpmodel: initialized successfully [ 4.033247] tegra_hv: get_hvd: not initialized yet [ 4.037911] user_ivc_mempool: hypervisor not present [ 4.044186] usbcore: registered new interface driver snd-usb-audio [ 4.050383] u32 classifier [ 4.051646] input device check on [ 4.055565] Actions configured [ 4.059170] Initializing XFRM netlink socket [ 4.063989] NET: Registered protocol family 10 [ 4.070673] Segment Routing with IPv6 [ 4.071768] NET: Registered protocol family 17 [ 4.075852] NET: Registered protocol family 15 [ 4.079995] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.093497] Bluetooth: RFCOMM socket layer initialized [ 4.098207] Bluetooth: RFCOMM ver 1.11 [ 4.102321] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.107925] Bluetooth: HIDP socket layer initialized [ 4.114028] 9pnet: Installing 9P2000 support [ 4.117677] Key type dns_resolver registered [ 4.123141] registered taskstats version 1 [ 4.125807] Loading compiled-in X.509 certificates [ 4.138994] Loaded X.509 cert 'Build time autogenerated kernel key: 9be991da9d8ded22224dde3fe9c6150c611f6c26' [ 4.141510] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.151433] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.153981] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.162309] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.170962] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.286992] tegra194-pcie 14160000.pcie: Link up [ 4.289918] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.290161] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.290288] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.290565] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.290747] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.291184] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.291611] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.303760] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.304335] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.304800] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.306431] pci 0004:01:00.0: supports D1 D2 [ 4.306599] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.318006] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.318427] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.318721] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.319377] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.319693] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.319885] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.321503] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.329008] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.337757] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.348350] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.352787] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.358041] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.364996] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.373490] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.375656] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.383894] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.392583] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.507890] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.508463] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.508661] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.508805] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.509095] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.509296] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.509711] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.510116] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.530063] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.530310] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.531917] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.533078] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.534363] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.536248] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.537140] pci 0005:00:00.0: Removing from iommu group 7 [ 5.537421] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.574357] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.598456] host1x 13e10000.host1x: initialized [ 5.600432] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.601191] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.602337] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.603093] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.604114] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.604842] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.605905] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.606465] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.607492] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.608032] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.618138] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.624817] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.634788] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.642087] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.652193] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.658708] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.668645] falcon 15340000.vic: Adding to iommu group 17 [ 5.683464] falcon 15340000.vic: initialized [ 5.684520] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.690405] falcon 15380000.nvjpg: initialized [ 5.691114] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.701733] falcon 154c0000.nvenc: initialized [ 5.702428] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.711747] falcon 15a80000.nvenc1: initialized [ 5.712295] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.724254] nvdec 15480000.nvdec: initialized [ 5.724766] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.734559] nvdec 15140000.nvdec1: initialized [ 5.735216] tsec 15500000.tsec: Adding to iommu group 18 [ 5.740687] tsec 15500000.tsec: initialized [ 5.741208] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.748904] tsec 15100000.tsecb: initialized [ 5.752686] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.780147] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.791882] gpio-374 (wifi-enable): hogged as output/high [ 5.792235] gpio-431 (camera-control-output-low): hogged as output/low [ 5.792615] gpio-432 (camera-control-output-low): hogged as output/low [ 5.794298] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.796363] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.796900] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.800121] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.805620] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.811100] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.816854] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.825681] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.832609] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.844364] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.849478] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.855313] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.864160] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.873263] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.880834] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.888387] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.894382] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.904138] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.910313] pva 16000000.pva0: Adding to iommu group 22 [ 5.936918] pva 16000000.pva0: initialized [ 5.941698] pva 16800000.pva1: Adding to iommu group 23 [ 5.960156] pva 16800000.pva1: initialized [ 5.964891] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.978987] nvdla 15880000.nvdla0: initialized [ 5.980457] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.989107] nvdla 158c0000.nvdla1: initialized [ 5.994531] tegradc 15200000.display: Adding to iommu group 26 [ 5.995015] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.995382] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.996396] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.996992] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.997108] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 5.997491] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.997574] tegradccommon 15200000.display-hub: dma mapping done [ 5.998002] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.003730] tegradc 15210000.display: Adding to iommu group 26 [ 6.004244] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.004384] generic_infoframe_type: 0x87 [ 6.004480] tegradc 15200000.display: DT parsed successfully [ 6.004577] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.005465] tegra_cec 3960000.tegra_cec: probed [ 6.008427] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.008441] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.008446] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.009262] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.009274] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.012683] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.019275] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.022360] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.037038] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.042114] tegradc 15210000.display: disp0 connected to head1->sor [ 6.048978] kfuse 3830000.kfuse: initialized [ 6.057386] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.065170] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.071069] tegradc 15210000.display: DT parsed successfully [ 6.077021] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.083681] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.090135] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.154506] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.163962] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.169030] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.178168] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.183550] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.205228] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.205672] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.206967] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.215073] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.224001] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.230314] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.238091] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.245289] usb usb1: Product: xHCI Host Controller [ 6.249981] usb usb1: Manufacturer: Linux 5.10.104 xhci-hcd [ 6.255753] usb usb1: SerialNumber: 3610000.xhci [ 6.261589] hub 1-0:1.0: USB hub found [ 6.264365] hub 1-0:1.0: 4 ports detected [ 6.268969] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.273992] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.281326] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.289106] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.296923] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.304413] usb usb2: Product: xHCI Host Controller [ 6.309422] usb usb2: Manufacturer: Linux 5.10.104 xhci-hcd [ 6.315083] usb usb2: SerialNumber: 3610000.xhci [ 6.320591] hub 2-0:1.0: USB hub found [ 6.323610] hub 2-0:1.0: 4 ports detected [ 6.364877] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.372464] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.374728] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.375016] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.388784] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.389849] tegra194-cpufreq ccplex: probed with BWMGR [ 6.391044] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.391502] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.393574] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.401275] mmc0: CQHCI version 5.10 [ 6.401525] tegra194-vi5 15c10000.vi: initialized [ 6.402720] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.403042] generic_infoframe_type: 0x87 [ 6.403216] tegradc 15200000.display: DT parsed successfully [ 6.404221] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.408928] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.415425] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.424254] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.431240] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.439141] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.439144] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.462452] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.468867] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.475304] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.475394] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.486957] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.488236] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.494370] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.494409] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.514967] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.515390] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.523849] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:07:6a:3b [ 6.529786] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.530937] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.551671] nvethernet 2490000.ethernet: Macsec not supported [ 6.559059] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.566163] tegradc 15200000.display: probed [ 6.566219] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.575334] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.582762] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.589344] random: crng init done [ 6.594346] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.601009] tegra-se-nvhost 15810000.se: initialized [ 6.609054] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.610345] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.613722] mmc0: Command Queue Engine enabled [ 6.617144] tegra-se-nvhost 15820000.se: initialized [ 6.620697] mmc0: periodic cache flush enabled [ 6.620712] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.631867] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.636913] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.643165] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.647574] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.654034] tegra-se-nvhost 15830000.se: initialized [ 6.666504] Console: switching to colour frame buffer device 480x135 [ 6.666944] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.672014] tegradc 15200000.display: fb registered [ 6.673768] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.678939] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.683266] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.691811] tegra-se-nvhost 15840000.se: initialized [ 6.698688] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.704587] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.708402] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.715069] tegra_actmon d230000.actmon: in actmon_register()... [ 6.732089] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.737753] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.746343] hvc_sysfs: hypervisor is not present [ 6.757239] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.758411] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.765616] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.770069] usb 1-2: Manufacturer: Generic [ 6.776723] hub 1-2:1.0: USB hub found [ 6.779155] ALSA device list: [ 6.779351] hub 1-2:1.0: 4 ports detected [ 6.781599] No soundcards found. [ 6.783505] tegradc 15200000.display: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 6.800410] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.808560] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.811808] Extcon AUX1(HDMI) enable [ 6.815601] tegradc 15210000.display: disp1 connected to head1->sor [ 6.821614] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.828711] tegradc 15210000.display: DT parsed successfully [ 6.834249] tegradc 15210000.display: Display dc.000000007ad7b77a registered with id=1 [ 6.842589] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.848117] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.861271] tegradc 15210000.display: probed [ 6.861608] tegradc 15210000.display: fb registered [ 6.866956] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.871061] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.872578] Freeing unused kernel memory: 3968K [ 6.878631] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.878694] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.896618] tegradc 15210000.display: blank - powerdown [ 6.901570] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.903196] Run /init as init process [ 6.909748] Extcon DP: HPD disabled [ 6.916940] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.924070] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.929615] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.944291] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.944960] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.952164] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.956623] usb 2-3: Manufacturer: Generic ÿâpll_d2 has no dyn ramp WARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.964432] tegradc 15200000.display: blank - powerdown [ 6.971952] hub 2-3:1.0: USB hub found [ 6.973848] hub 2-3:1.0: 4 ports detected [ 6.975571] Root device found: mmcblk0p1 [ 6.977584] Found dev node: /dev/mmcblk0p1 [ 6.998978] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.998983] Extcon AUX1(HDMI) disable [ 7.006944] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.006950] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.011857] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.015703] Rootfs mounted over mmcblk0p1 [ 7.022270] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.023384] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.047001] tegradc 15200000.display: unblank [ 7.047803] Switching from initrd to actual rootfs [ 7.048297] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.048491] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.058155] tegradc 15200000.display: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 7.060289] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.062922] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.064421] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.064425] Extcon AUX1(HDMI) enable [ 7.077044] tegradc 15200000.display: sync windows ret = 247 [ 7.114235] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.121640] Extcon HDMI: HPD enabled [ 7.125225] tegradc 15200000.display: hdmi: plugged [ 7.187872] systemd[1]: System time before build time, advancing clock. [ 7.207282] x_tables: module verification failed: signature and/or required key missing - tainting kernel [ 7.212054] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.212344] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.212622] usb 1-3: Product: Bluetooth Radio [ 7.212783] usb 1-3: Manufacturer: Realtek [ 7.212914] usb 1-3: SerialNumber: 00e04c000001 [ 7.243205] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.245445] systemd[1]: Detected architecture arm64. [ 7.285496] systemd[1]: No hostname configured. [ 7.285661] systemd[1]: Set hostname to . [ 7.482969] usb 1-2.1: new high-speed USB device number 4 using tegra-xusb [ 7.583854] usb 1-2.1: New USB device found, idVendor=14cd, idProduct=8601, bcdDevice= 0.00 [ 7.584157] usb 1-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 7.584376] usb 1-2.1: Product: USB 2.0 Hub [ 7.584514] usb 1-2.1: Manufacturer: USB Device [ 7.586095] hub 1-2.1:1.0: USB hub found [ 7.586336] hub 1-2.1:1.0: 4 ports detected [ 7.801820] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.802609] systemd[1]: Reached target Slices. [ 7.803012] systemd[1]: Reached target Swap. [ 7.804249] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.805121] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.805733] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.807227] systemd[1]: Listening on Journal Audit Socket. [ 7.816603] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.824667] systemd[1]: Listening on Journal Socket. [ 7.832392] systemd[1]: Listening on udev Control Socket. [ 7.839234] systemd[1]: Listening on udev Kernel Socket. [ 7.846393] systemd[1]: dev-hugepages.mount: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.849594] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.858889] systemd[1]: Mounting Huge Pages File System... [ 7.870066] systemd[1]: Mounting POSIX Message Queue File System... [ 7.874933] usb 1-2.1.2: new low-speed USB device number 5 using tegra-xusb [ 7.884712] systemd[1]: Mounting Kernel Debug File System... [ 7.896287] systemd[1]: Mounting Kernel Trace File System... [ 7.909152] systemd[1]: Starting Journal Service... [ 7.923088] systemd[1]: Starting Set the console keyboard layout... [ 7.934719] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 7.945947] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 7.957545] systemd[1]: Started Nameserver information manager. [ 7.965607] systemd[1]: Reached target Network (Pre). [ 7.978376] systemd[1]: Starting Set console scheme... [ 7.981288] usb 1-2.1.2: New USB device found, idVendor=04b3, idProduct=3025, bcdDevice= 1.09 [ 7.984980] usb 1-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.984986] usb 1-2.1.2: Product: USB NetVista Full Width Keyboard. [ 7.984990] usb 1-2.1.2: Manufacturer: LITE-ON Technology [ 7.991904] input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/0003:04B3:3025.0001/input/input1 [ 8.009531] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.013175] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.022726] systemd[1]: Starting Load Kernel Modules... [ 8.033677] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.046063] systemd[1]: Starting udev Coldplug all Devices... [ 8.055328] hid-generic 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-3610000.xhci-2.1.2/input0 [ 8.059914] systemd[1]: Mounted Huge Pages File System. [ 8.060724] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.061445] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.061831] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.061836] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.061845] nvmap_page_pool_init: Total RAM pages: 1752834 [ 8.061848] nvmap_page_pool_init: nvmap page pool size: 219104 pages (855 MB) [ 8.062187] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.062289] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.062356] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.062365] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.104266] systemd[1]: Mounted POSIX Message Queue File System. [ 8.112270] systemd[1]: Mounted Kernel Debug File System. [ 8.116841] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.116841] [ 8.126386] systemd[1]: Mounted Kernel Trace File System. [ 8.138257] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.142934] usb 1-2.1.3: new low-speed USB device number 6 using tegra-xusb [ 8.155967] systemd[1]: Finished Set console scheme. [ 8.166707] systemd[1]: Finished Load Kernel Modules. [ 8.177509] systemd[1]: Finished Set the console keyboard layout. [ 8.187776] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.197945] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.206559] systemd[1]: Mounting Kernel Configuration File System... [ 8.217939] systemd[1]: Started OP-TEE Client Supplicant. [ 8.229890] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.233949] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.242063] systemd[1]: Starting Load/Save Random Seed... [ 8.251405] usb 1-2.1.3: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14 [ 8.253302] systemd[1]: Starting Apply Kernel Variables... [ 8.255025] usb 1-2.1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 8.262270] usb 1-2.1.3: Product: USB Optical Mouse [ 8.269458] input: USB Optical Mouse as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1.3/1-2.1.3:1.0/0003:1BCF:0005.0002/input/input2 [ 8.273303] systemd[1]: Starting Create System Users... [ 8.273564] hid-generic 0003:1BCF:0005.0002: input,hidraw1: USB HID v1.10 Mouse [USB Optical Mouse] on usb-3610000.xhci-2.1.3/input0 [ 8.290508] systemd[1]: Mounted Kernel Configuration File System. [ 8.310077] systemd[1]: Finished Load/Save Random Seed. [ 10.031126] using random self ethernet address [ 10.043053] using random host ethernet address [ 10.152476] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.172120] imx219 9-0010: board setup failed [ 10.180717] imx219: probe of 9-0010 failed with error -121 [ 10.220951] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.242365] imx219 10-0010: board setup failed [ 10.251031] imx219: probe of 10-0010 failed with error -121 [ 11.565372] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.568706] Creating 1 MTD partitions on "spi6.0": [ 11.572516] 0x000000000000-0x000002000000 : "Whole_flash0" [ 11.761361] using random self ethernet address [ 11.764690] using random host ethernet address [ 18.512102] IRQ268: set affinity failed(-22). [ 18.512281] CPU4: shutdown [ 18.568083] IRQ268: set affinity failed(-22). [ 18.568481] CPU5: shutdown [ 27.578850] Please complete system configuration setup on desktop to proceed... Ubuntu 20.04.4 LTS pcp-desktop ttyTCU0 pcp-desktop login: [ 294.988602] using random self ethernet address [ 294.990911] using random host ethernet address [ 295.369682] using random self ethernet address [ 295.372134] using random host ethernet address pcp-desktop login: pcp Password: Welcome to Ubuntu 20.04.4 LTS (GNU/Linux 5.10.104 aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. 227 updates can be applied immediately. 182 of these updates are standard security updates. To see these additional updates run: apt list --upgradable The programs included with the Ubuntu system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. To run a command as administrator (user "root"), use "sudo ". See "man sudo_root" for details. pcp@pcp-desktop:~$ sudo systemctl disable nv-l4t-usb-device-mode.service [sudo] password for pcp: Removed /etc/systemd/system/multi-user.target.wants/nv-l4t-usb-device-mode.service. Removed /etc/systemd/system/nv-l4t-usb-device-mode.service. pcp@pcp-desktop:~$ pcp@pcp-desktop:~$ pcp@pcp-desktop:~$ [ 385.493827] watchdog: watchdog0: watchdog did not stop! [ 385.944940] Trying to unregister non-registered hwtime source [ 389.003939] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 389.006094] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy^@^@ÿâ [0000.024] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.032] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.055] I> Ram repair fuse : 0x0 [0000.058] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.077] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.093] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 57500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ^@ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNIÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäNG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.617] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.647] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 3840, height = 2160, frequency = 594000000 [0003.648] I> width = 3840, height = 2160, frequency = 297000000 [0003.649] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1920, height = 1080, frequency = 148351648 [0003.654] I> width = 1920, height = 1080, frequency = 74175824 [0003.660] I> width = 1920, height = 1080, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 720, height = 480, frequency = 26973026 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 640, height = 480, frequency = 25174825 [0003.687] I> width = 3840, height = 2160, frequency = 593406593 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.727] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.742] calling apps_init() [0003.743] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) ^[[2J^[[04D^[[=3h^[[2J^[[09D ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104 (root@frank-desktop) (aarch64-linux-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #3 SMP PREEMPT Wed Nov 30 10:34:26 CST 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x258722918 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x0000000258722918 to 0x0000000258722950. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586effff] [ 0.000000] node 0: [mem 0x00000002586f0000-0x000000025871ffff] [ 0.000000] node 0: [mem 0x0000000258720000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933448K/7473852K available (18112K kernel code, 3170K rwdata, 7128K rodata, 3968K init, 1093K bss, 474868K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000754] Console: colour dummy device 80x25 [ 0.002201] printk: console [tty0] enabled [ 0.002277] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002313] pid_max: default: 32768 minimum: 301 [ 0.002530] LSM: Security Framework initializing [ 0.002584] Yama: becoming mindful. [ 0.002624] SELinux: Initializing. [ 0.002774] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002824] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005597] rcu: Hierarchical SRCU implementation. [ 0.005861] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007678] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007728] DTB Build time: Nov 30 2022 10:34:23 [ 0.010640] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010883] Remapping and enabling EFI services. [ 0.012770] smp: Bringing up secondary CPUs ... [ 0.042118] Detected PIPT I-cache on CPU1 [ 0.042219] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071784] Detected PIPT I-cache on CPU2 [ 0.071856] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101388] Detected PIPT I-cache on CPU3 [ 0.101521] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131120] Detected PIPT I-cache on CPU4 [ 0.131256] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160855] Detected PIPT I-cache on CPU5 [ 0.160916] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161247] smp: Brought up 1 node, 6 CPUs [ 0.161473] SMP: Total of 6 processors activated. [ 0.161512] CPU features: detected: Privileged Access Never [ 0.161534] CPU features: detected: LSE atomic instructions [ 0.161564] CPU features: detected: User Access Override [ 0.161579] CPU features: detected: 32-bit EL0 Support [ 0.161592] CPU features: detected: RAS Extension Support [ 0.161604] CPU features: detected: CRC32 instructions [ 0.161615] CPU features: detected: 32-bit EL1 Support [ 0.224838] CPU: All CPU(s) started at EL2 [ 0.230844] devtmpfs: initialized [ 0.288128] Registered cp15_barrier emulation handler [ 0.288265] Registered setend emulation handler [ 0.288293] KASLR enabled [ 0.288539] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288661] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290346] pinctrl core: initialized pinctrl subsystem [ 0.291400] SMBIOS 3.0.0 present. [ 0.291465] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292200] NET: Registered protocol family 16 [ 0.294376] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295105] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296113] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296188] audit: initializing netlink subsys (disabled) [ 0.296487] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296952] thermal_sys: Registered thermal governor 'step_wise' [ 0.296960] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296984] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299828] cpuidle: using governor menu [ 0.300258] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300639] ASID allocator initialised with 32768 entries [ 0.300885] Serial: AMBA PL011 UART driver [ 0.303900] Tegra reboot handler registered. [ 0.361300] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.361426] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.361644] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.361694] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.361845] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.361889] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.362025] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.362115] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.362225] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.362270] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.364303] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.364338] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.364369] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.364398] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.364428] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.364455] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.364493] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.364527] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.364554] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.364579] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.364611] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.364636] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.364661] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.364685] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.364709] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.364750] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.364779] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.364891] mc-err: mcerr ops are set to t19x [ 0.374943] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.374975] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.374987] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.374998] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.380627] ACPI: Interpreter disabled. [ 0.381535] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.384607] iommu: Default domain type: Translated [ 0.384688] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.384997] SCSI subsystem initialized [ 0.385121] usbcore: registered new interface driver usbfs [ 0.385170] usbcore: registered new interface driver hub [ 0.385199] usbcore: registered new device driver usb [ 0.385527] mc: Linux media interface: v0.10 [ 0.385550] videodev: Linux video capture interface: v2.00 [ 0.385817] pps_core: LinuxPPS API ver. 1 registered [ 0.385836] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.385854] PTP clock support registered [ 0.386052] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.386289] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.386332] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.386809] Registered efivars operations [ 0.391484] FPGA manager framework [ 0.391575] Advanced Linux Sound Architecture Driver Initialized. [ 0.392113] Bluetooth: Core ver 2.22 [ 0.392168] NET: Registered protocol family 31 [ 0.392180] Bluetooth: HCI device and connection manager initialized [ 0.392195] Bluetooth: HCI socket layer initialized [ 0.392206] Bluetooth: L2CAP socket layer initialized [ 0.392225] Bluetooth: SCO socket layer initialized [ 0.394041] camchar: rtcpu character device driver loaded [ 0.394964] clocksource: Switched to clocksource arch_sys_counter [ 0.785244] VFS: Disk quotas dquot_6.6.0 [ 0.785325] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.785647] pnp: PnP ACPI: disabled [ 0.797220] la/ptsa driver initialized. [ 0.797368] NET: Registered protocol family 2 [ 0.797558] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.805153] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.805337] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.805717] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.806348] TCP: Hash tables configured (established 65536 bind 65536) [ 0.806494] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.806644] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.806900] NET: Registered protocol family 1 [ 0.807612] RPC: Registered named UNIX socket transport module. [ 0.807653] RPC: Registered udp transport module. [ 0.807666] RPC: Registered tcp transport module. [ 0.807678] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.807697] PCI: CLS 0 bytes, default 64 [ 0.808002] Trying to unpack rootfs image as initramfs... [ 1.062527] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.065312] Freeing initrd memory: 8196K [ 1.069338] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.069370] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.069424] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.069732] kvm [1]: IPA Size Limit: 40 bits [ 1.070123] kvm [1]: vgic interrupt IRQ9 [ 1.070529] kvm [1]: VHE mode initialized successfully [ 1.071767] Initialise system trusted keyrings [ 1.072017] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.077305] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.078118] NFS: Registering the id_resolver key type [ 1.078154] Key type id_resolver registered [ 1.078168] Key type id_legacy registered [ 1.078250] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.078272] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.078308] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.087692] NET: Registered protocol family 38 [ 1.087714] Key type asymmetric registered [ 1.087727] Asymmetric key parser 'x509' registered [ 1.087769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.087999] io scheduler mq-deadline registered [ 1.088015] io scheduler kyber registered [ 1.093506] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.096474] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.096544] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.096614] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.096677] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.096740] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.102230] scrncapt: init (heads:4 wins:6 planes:4) [ 1.102359] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.103398] EINJ: ACPI disabled. [ 1.106877] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.106929] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.106943] tegra-pmc: ### PMC reset level: L1 [ 1.107009] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.107060] tegra-pmc: PMC Prod config success [ 1.111793] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.117392] random: fast init done [ 1.125765] printk: console [ttyTCU0] enabled [ 2.661971] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.666536] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.671063] arm-smmu 10000000.iommu: stage 1 translation [ 2.676313] arm-smmu 10000000.iommu: stage 2 translation [ 2.682084] arm-smmu 10000000.iommu: nested translation [ 2.687173] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.694345] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.704008] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.707465] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.714026] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.721981] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.727069] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.732047] arm-smmu 12000000.iommu: stage 1 translation [ 2.737300] arm-smmu 12000000.iommu: stage 2 translation [ 2.742983] arm-smmu 12000000.iommu: nested translation [ 2.748437] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.755589] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.765165] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.768459] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.775270] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.782772] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.792098] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.795429] tegra_profiler: auth: init [ 2.799917] THERMAL EST: found 3 subdevs [ 2.803109] THERMAL EST num_resources: 0 [ 2.807209] [THERMAL EST subdev 0] [ 2.810259] [THERMAL EST subdev 1] [ 2.813946] [THERMAL EST subdev 2] [ 2.816937] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.823629] THERMAL EST: thz register success. [ 2.827888] THERMAL EST: end of probe, return err: 0 [ 2.832944] nvsciipc: loaded module [ 2.840033] tun: Universal TUN/TAP device driver, 1.6 [ 2.842651] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.848960] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.854512] e1000e: Intel(R) PRO/1000 Network Driver [ 2.859445] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.865267] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.870824] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.877001] PPP generic driver version 2.4.2 [ 2.881261] PPP BSD Compression module registered [ 2.885800] PPP Deflate Compression module registered [ 2.891045] PPP MPPE Compression module registered [ 2.895798] usbcore: registered new interface driver r8152 [ 2.901349] usbcore: registered new interface driver asix [ 2.906897] usbcore: registered new interface driver ax88179_178a [ 2.912799] usbcore: registered new interface driver cdc_ether [ 2.918719] usbcore: registered new interface driver net1080 [ 2.924603] usbcore: registered new interface driver cdc_subset [ 2.930366] usbcore: registered new interface driver zaurus [ 2.936050] usbcore: registered new interface driver cdc_ncm [ 2.941985] usbcore: registered new interface driver aqc111 [ 2.947629] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.953456] ohci-pci: OHCI PCI platform driver [ 2.957999] ohci-platform: OHCI generic platform driver [ 2.963654] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.970074] usbcore: registered new interface driver uas [ 2.974051] usbcore: registered new interface driver usb-storage [ 2.980454] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.986159] mousedev: PS/2 mouse device common for all mice [ 2.991187] usbcore: registered new interface driver xpad [ 2.999196] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.001938] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.009720] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.016317] i2c /dev entries driver [ 3.019636] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.025333] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.030858] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.036390] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.041711] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.047249] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.052651] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.066081] device-mapper: uevent: version 1.0.3 [ 3.066513] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.072771] cpuidle: Initializing cpuidle driver [ 3.076805] sdhci: Secure Digital Host Controller Interface driver [ 3.081545] sdhci: Copyright(c) Pierre Ossman [ 3.085899] Synopsys Designware Multimedia Card Interface Driver [ 3.092103] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.098074] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.098942] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.111396] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.132384] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.141848] vdd-1v0: supplied by regulator-dummy [ 3.147353] vdd-1v8-hs: supplied by regulator-dummy [ 3.152076] vdd-1v8-ls: supplied by regulator-dummy [ 3.156846] vdd-1v8-ao: supplied by regulator-dummy [ 3.160710] vddio-ddr-1v1: supplied by regulator-dummy [ 3.165108] vdd-rtc: supplied by regulator-dummy [ 3.166808] spmic-ldo1: supplied by regulator-dummy [ 3.168049] vdd-ao-3v3: supplied by regulator-dummy [ 3.174239] vddio-emmc-3v3: supplied by regulator-dummy [ 3.180439] spmic-ldo4: supplied by regulator-dummy [ 3.181624] vdd-usb-3v3: supplied by regulator-dummy [ 3.187835] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.193983] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.199503] spmic-ldo8: supplied by vdd-1v8-ls [ 3.200927] gpio-510 (gpio_default): hogged as output/high [ 3.202288] gpio-511 (gpio_default): hogged as output/high [ 3.205160] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.344159] max77686-rtc max77620-rtc: registered as rtc0 [ 3.345494] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.345816] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.164050] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.165400] hid: raw HID events driver (C) Jiri Kosina [ 4.166253] usbcore: registered new interface driver usbhid [ 4.166406] usbhid: USB HID core driver [ 4.168555] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.169738] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.288849] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.363285] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.245 ms) ÿá[ 4.254069] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.254679] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.255843] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.256574] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.258235] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.258932] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.259573] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.260806] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.261184] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.263162] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.270150] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.276347] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.281713] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.288328] denver_knobs_init:MTS_VERSION:55637613 [ 4.301032] t19x_cache tegra-cache: probed [ 4.305362] optee: probing for conduit method. [ 4.306230] optee: revision 3.16 (65cc2218) [ 4.307280] optee: dynamic shared memory is enabled [ 4.308926] optee: initialized driver [ 4.316533] nvpmodel: initialized successfully [ 4.317149] tegra_hv: get_hvd: not initialized yet [ 4.321414] user_ivc_mempool: hypervisor not present [ 4.327137] usbcore: registered new interface driver snd-usb-audio [ 4.333900] u32 classifier [ 4.334841] input device check on [ 4.338565] Actions configured [ 4.342524] Initializing XFRM netlink socket [ 4.347377] NET: Registered protocol family 10 [ 4.353455] Segment Routing with IPv6 [ 4.354755] NET: Registered protocol family 17 [ 4.358723] NET: Registered protocol family 15 [ 4.363432] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.376953] Bluetooth: RFCOMM socket layer initialized [ 4.381708] Bluetooth: RFCOMM ver 1.11 [ 4.385307] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.391396] Bluetooth: HIDP socket layer initialized [ 4.396864] 9pnet: Installing 9P2000 support [ 4.400575] Key type dns_resolver registered [ 4.406643] registered taskstats version 1 [ 4.409328] Loading compiled-in X.509 certificates [ 4.422223] Loaded X.509 cert 'Build time autogenerated kernel key: 9be991da9d8ded22224dde3fe9c6150c611f6c26' [ 4.425192] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.434822] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.437254] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.445506] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.454257] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.571105] tegra194-pcie 14160000.pcie: Link up [ 4.574633] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.575027] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.575248] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.575784] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.576075] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.576801] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.577564] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.595843] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.596655] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.597376] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.599230] pci 0004:01:00.0: supports D1 D2 [ 4.599482] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.613397] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.613902] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.614223] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.614861] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.615385] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.615602] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.615815] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.616139] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.622090] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.633071] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.636616] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.642541] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.649404] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.658423] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.659793] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.668602] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.676971] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.791868] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.792393] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.792578] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.792706] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.793013] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.793320] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.793893] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.794322] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.816588] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.817050] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.819578] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.820806] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.822320] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.824071] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.824844] pci 0005:00:00.0: Removing from iommu group 7 [ 5.825140] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.860518] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.884469] host1x 13e10000.host1x: initialized [ 5.885944] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.886693] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.888147] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.888841] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.889877] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.890503] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.891663] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.892321] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.893302] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.893819] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.902362] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.909165] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.919133] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.925791] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.935677] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.943045] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.952621] falcon 15340000.vic: Adding to iommu group 17 [ 5.967145] falcon 15340000.vic: initialized [ 5.968132] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.973737] falcon 15380000.nvjpg: initialized [ 5.974292] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.985769] falcon 154c0000.nvenc: initialized [ 5.986327] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.996225] falcon 15a80000.nvenc1: initialized [ 5.996803] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.008084] nvdec 15480000.nvdec: initialized [ 6.008828] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.019791] nvdec 15140000.nvdec1: initialized [ 6.020657] tsec 15500000.tsec: Adding to iommu group 18 [ 6.027160] tsec 15500000.tsec: initialized [ 6.027944] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.033606] tsec 15100000.tsecb: initialized [ 6.038009] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.064655] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.077037] gpio-374 (wifi-enable): hogged as output/high [ 6.077482] gpio-431 (camera-control-output-low): hogged as output/low [ 6.077733] gpio-432 (camera-control-output-low): hogged as output/low [ 6.079628] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.081624] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.082133] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.084205] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.089305] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.095302] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.100840] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.109119] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.116524] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.128169] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.132961] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.138929] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.147775] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.157204] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.164886] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.172200] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.178119] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.187903] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.194182] pva 16000000.pva0: Adding to iommu group 22 [ 6.213095] random: crng init done [ 6.220689] pva 16000000.pva0: initialized [ 6.226019] pva 16800000.pva1: Adding to iommu group 23 [ 6.237816] pva 16800000.pva1: initialized [ 6.242241] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.255045] nvdla 15880000.nvdla0: initialized [ 6.256382] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.264428] nvdla 158c0000.nvdla1: initialized [ 6.267997] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.268408] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.269148] tegradc 15200000.display: Adding to iommu group 26 [ 6.269195] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.269305] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.269362] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.269688] tegradccommon 15200000.display-hub: dma mapping done [ 6.270809] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.276188] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.276925] tegradc 15210000.display: Adding to iommu group 26 [ 6.281658] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.287035] generic_infoframe_type: 0x87 [ 6.293615] tegra_cec 3960000.tegra_cec: probed [ 6.299226] tegradc 15200000.display: DT parsed successfully [ 6.305968] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.309199] tegradc 15200000.display: Display dc.00000000e3058020 registered with id=0 [ 6.316001] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.323443] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.325404] kfuse 3830000.kfuse: initialized [ 6.333244] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.333250] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.334255] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.340657] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.348026] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.351986] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.352760] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.361797] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.370072] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.377263] tegradc 15210000.display: disp0 connected to head1->sor [ 6.394702] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.401102] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.409802] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.413918] tegradc 15210000.display: DT parsed successfully [ 6.436131] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.442509] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.449263] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.471310] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.491107] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.491443] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.494108] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.502687] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.511215] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.517734] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.525394] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.532641] usb usb1: Product: xHCI Host Controller [ 6.537361] usb usb1: Manufacturer: Linux 5.10.104 xhci-hcd [ 6.543395] usb usb1: SerialNumber: 3610000.xhci [ 6.548844] hub 1-0:1.0: USB hub found [ 6.551970] hub 1-0:1.0: 4 ports detected [ 6.556603] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.561090] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.568960] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.576439] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.584548] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.591798] usb usb2: Product: xHCI Host Controller [ 6.596517] usb usb2: Manufacturer: Linux 5.10.104 xhci-hcd [ 6.602201] usb usb2: SerialNumber: 3610000.xhci [ 6.607666] hub 2-0:1.0: USB hub found [ 6.610677] hub 2-0:1.0: 4 ports detected [ 6.653235] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.658884] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.660321] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.660525] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.673628] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.674668] tegra194-cpufreq ccplex: probed with BWMGR [ 6.675969] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.676359] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.678446] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.684684] tegra194-vi5 15c10000.vi: initialized [ 6.686097] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.686326] generic_infoframe_type: 0x87 [ 6.686823] tegradc 15200000.display: DT parsed successfully [ 6.687719] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.689039] mmc0: CQHCI version 5.10 [ 6.692472] tegradc 15200000.display: Display dc.0000000045381028 registered with id=0 [ 6.698800] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.703252] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.710457] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.717943] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.718558] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.718562] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.718942] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.726532] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.726543] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.733360] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.741225] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.750358] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.763033] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.763802] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.770366] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.804223] mmc0: Command Queue Engine enabled [ 6.810639] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.813129] tegradc 15200000.display: probed [ 6.817438] mmc0: periodic cache flush enabled [ 6.817454] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.818225] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.823062] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.833744] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.863542] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:07:6a:3b [ 6.870725] nvethernet 2490000.ethernet: Macsec not supported [ 6.871294] Console: switching to colour frame buffer device 480x135 [ 6.872070] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.874609] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.876158] tegradc 15200000.display: fb registered [ 6.876229] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.909709] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.910757] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.914983] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.921152] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.928358] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.941918] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.948465] tegra-se-nvhost 15810000.se: initialized [ 6.953142] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.958655] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.965127] tegra-se-nvhost 15820000.se: initialized [ 6.971418] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.976131] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.982664] tegra-se-nvhost 15830000.se: initialized [ 6.988087] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.993770] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.000105] tegra-se-nvhost 15840000.se: initialized [ 7.002145] tegradc 15200000.display: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 7.006146] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.015497] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.020929] tegra_actmon d230000.actmon: in actmon_register()... [ 7.022658] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.022663] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.022667] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.022671] usb 1-2: Manufacturer: Generic [ 7.024571] hub 1-2:1.0: USB hub found [ 7.025613] hub 1-2:1.0: 4 ports detected [ 7.029706] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.031565] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.040038] Extcon AUX1(HDMI) enable [ 7.040156] tegradc 15210000.display: disp1 connected to head1->sor [ 7.052037] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.056239] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.060611] hvc_sysfs: hypervisor is not present [ 7.063742] tegradc 15210000.display: DT parsed successfully [ 7.112066] tegradc 15210000.display: Display dc.00000000598bab50 registered with id=1 [ 7.138328] ALSA device list: [ 7.138441] No soundcards found. [ 7.138764] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.138988] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.147038] tegradc 15210000.display: probed [ 7.147417] tegradc 15210000.display: fb registered [ 7.147963] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.150898] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.156898] Freeing unused kernel memory: 3968K [ 7.162548] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.175034] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.179104] Run /init as init process [ 7.184363] tegradc 15210000.display: blank - powerdown [ 7.189299] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.189310] Extcon DP: HPD disabled [ 7.201293] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.207965] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 ÿâpll_d2 has no dyn ramp WARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.213607] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.213641] tegradc 15200000.display: blank - powerdown [ 7.218107] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.218113] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.218117] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.218120] usb 2-3: Manufacturer: Generic [ 7.228972] hub 2-3:1.0: USB hub found [ 7.230825] hub 2-3:1.0: 4 ports detected [ 7.245123] Root device found: mmcblk0p1 [ 7.247164] Found dev node: /dev/mmcblk0p1 [ 7.251057] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.251062] Extcon AUX1(HDMI) disable [ 7.274587] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.275658] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.281475] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.285147] Rootfs mounted over mmcblk0p1 [ 7.295047] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.295053] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.301106] tegradc 15200000.display: unblank [ 7.302462] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.302659] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.312949] tegradc 15200000.display: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 7.315071] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.319071] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.319074] Extcon AUX1(HDMI) enable [ 7.327705] Switching from initrd to actual rootfs [ 7.331836] tegradc 15200000.display: sync windows ret = 247 [ 7.339042] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.400346] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.407253] Extcon HDMI: HPD enabled [ 7.411108] tegradc 15200000.display: hdmi: plugged [ 7.523565] systemd[1]: System time before build time, advancing clock. [ 7.547061] x_tables: module verification failed: signature and/or required key missing - tainting kernel [ 7.548468] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.548713] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.548909] usb 1-3: Product: Bluetooth Radio [ 7.549030] usb 1-3: Manufacturer: Realtek [ 7.549141] usb 1-3: SerialNumber: 00e04c000001 [ 7.586291] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.588732] systemd[1]: Detected architecture arm64. [ 7.627964] systemd[1]: Set hostname to . [ 7.743014] usb 1-2.1: new high-speed USB device number 4 using tegra-xusb [ 7.848023] usb 1-2.1: New USB device found, idVendor=14cd, idProduct=8601, bcdDevice= 0.00 [ 7.848292] usb 1-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 7.848478] usb 1-2.1: Product: USB 2.0 Hub [ 7.848605] usb 1-2.1: Manufacturer: USB Device [ 7.850132] hub 1-2.1:1.0: USB hub found [ 7.850402] hub 1-2.1:1.0: 4 ports detected [ 8.103359] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.108817] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.116664] systemd[1]: Created slice system-modprobe.slice. [ 8.126165] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.134817] systemd[1]: Created slice User and Session Slice. [ 8.139000] usb 1-2.1.2: new low-speed USB device number 5 using tegra-xusb [ 8.145795] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.153332] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.159902] systemd[1]: Reached target User and Group Name Lookups. [ 8.166221] systemd[1]: Reached target Slices. [ 8.172420] systemd[1]: Reached target Swap. [ 8.179472] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.186112] systemd[1]: Listening on Syslog Socket. [ 8.200861] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.215890] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.226015] systemd[1]: Listening on Journal Audit Socket. [ 8.232522] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.239123] systemd[1]: Listening on Journal Socket. [ 8.245789] usb 1-2.1.2: New USB device found, idVendor=04b3, idProduct=3025, bcdDevice= 1.09 [ 8.245801] systemd[1]: Listening on udev Control Socket. [ 8.248872] usb 1-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.254999] usb 1-2.1.2: Product: USB NetVista Full Width Keyboard. [ 8.255003] usb 1-2.1.2: Manufacturer: LITE-ON Technology [ 8.261643] input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/0003:04B3:3025.0001/input/input1 [ 8.268367] systemd[1]: Listening on udev Kernel Socket. [ 8.279845] systemd[1]: Mounting Huge Pages File System... [ 8.290393] systemd[1]: Mounting POSIX Message Queue File System... [ 8.301063] systemd[1]: Mounting RPC Pipe File System... [ 8.311649] systemd[1]: Mounting Kernel Debug File System... [ 8.319435] hid-generic 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-3610000.xhci-2.1.2/input0 [ 8.322302] systemd[1]: Mounting Kernel Trace File System... [ 8.334890] systemd[1]: Starting Journal Service... [ 8.346209] systemd[1]: Starting Set the console keyboard layout... [ 8.357459] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.364001] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.371660] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.383190] systemd[1]: Started Nameserver information manager. [ 8.391956] systemd[1]: Reached target Network (Pre). [ 8.401320] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.404773] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.407028] usb 1-2.1.3: new low-speed USB device number 6 using tegra-xusb [ 8.413992] systemd[1]: Starting Load Kernel Modules... [ 8.424670] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.436601] systemd[1]: Starting udev Coldplug all Devices... [ 8.449586] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.449988] systemd[1]: Mounted Huge Pages File System. [ 8.451571] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.453509] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.461589] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.461605] nvmap_page_pool_init: Total RAM pages: 1752787 [ 8.461608] nvmap_page_pool_init: nvmap page pool size: 219098 pages (855 MB) [ 8.461824] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.462097] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.462287] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.462297] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.489331] systemd[1]: Mounted POSIX Message Queue File System. [ 8.496059] systemd[1]: Mounted RPC Pipe File System. [ 8.502764] systemd[1]: Mounted Kernel Debug File System. [ 8.509438] systemd[1]: Mounted Kernel Trace File System. [ 8.517055] usb 1-2.1.3: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14 [ 8.520480] usb 1-2.1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 8.521946] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.523546] usb 1-2.1.3: Product: USB Optical Mouse [ 8.525993] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.525993] [ 8.531231] input: USB Optical Mouse as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1.3/1-2.1.3:1.0/0003:1BCF:0005.0002/input/input2 [ 8.539699] hid-generic 0003:1BCF:0005.0002: input,hidraw1: USB HID v1.10 Mouse [USB Optical Mouse] on usb-3610000.xhci-2.1.3/input0 [ 8.547834] systemd[1]: nvfb-udev.service: Succeeded. [ 8.554293] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.567568] systemd[1]: Finished Load Kernel Modules. [ 8.577402] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.585306] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.594401] systemd[1]: Mounting Kernel Configuration File System... [ 8.606079] systemd[1]: Started OP-TEE Client Supplicant. [ 8.618438] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.623642] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.631689] systemd[1]: Starting Load/Save Random Seed... [ 8.642699] systemd[1]: Starting Apply Kernel Variables... [ 8.654702] systemd[1]: Starting Create System Users... [ 8.668246] systemd[1]: Finished Set the console keyboard layout. [ 10.269361] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.283159] imx219 9-0010: board setup failed [ 10.286081] imx219: probe of 9-0010 failed with error -121 [ 10.302882] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.324421] imx219 10-0010: board setup failed [ 10.327451] imx219: probe of 10-0010 failed with error -121 [ 11.457742] hot-surface-alert cooling state: 0 -> 1 [ 11.885146] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.885152] Creating 1 MTD partitions on "spi6.0": [ 11.885162] 0x000000000000-0x000002000000 : "Whole_flash0" [ 13.984211] IRQ269: set affinity failed(-22). [ 13.984435] CPU4: shutdown [ 14.052356] IRQ269: set affinity failed(-22). [ 14.052720] CPU5: shutdown [ 14.152643] hot-surface-alert cooling state: 1 -> 0 Ubuntu 20.04.4 LTS pcp-desktop ttyTCU0 pcp-desktop login: [ 78.243837] watchdog: watchdog0: watchdog did not stop! [ 78.595770] Trying to unregister non-registered hwtime source [ 81.656017] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 81.658496] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy : 1, ^@^@ÿâ [0000.024] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.032] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.055] I> Ram repair fuse : 0x0 [0000.058] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.077] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.093] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 58500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ^@ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.480] I> register 'maxim' power off handle [0003.482] I> virtual i2c enabled [0003.482] I> registered 'maxim,max20024' pmic [0003.482] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.629] I> edid read success [0003.641] I> edid read success [0003.642] I> width = 640, height = 480, frequency = 25174825 [0003.642] I> width = 3840, height = 2160, frequency = 594000000 [0003.642] I> width = 3840, height = 2160, frequency = 297000000 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1920, height = 1080, frequency = 148351648 [0003.648] I> width = 1920, height = 1080, frequency = 74175824 [0003.653] I> width = 1920, height = 1080, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 720, height = 480, frequency = 26973026 [0003.670] I> width = 720, height = 480, frequency = 26973026 [0003.676] I> width = 640, height = 480, frequency = 25174825 [0003.681] I> width = 3840, height = 2160, frequency = 593406593 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.721] I> hdmi_enable, starting HDMI initialisation [0003.726] I> hdmi_enable, HDMI initialisation complete [0003.735] initializing target [0003.736] calling apps_init() [0003.737] starting app kernel_boot_app [0003.738] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) ^[[2J^[[04D^[[=3h^[[2J^[[09D ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104 (root@frank-desktop) (aarch64-linux-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #3 SMP PREEMPT Wed Nov 30 10:34:26 CST 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943d018 ESRT=0x25944fb98 RNG=0x27c595918 MEMRESERVE=0x25943ef18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fb98 to 0x000000025944fbd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586effff] [ 0.000000] node 0: [mem 0x00000002586f0000-0x000000025871ffff] [ 0.000000] node 0: [mem 0x0000000258720000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933444K/7473852K available (18112K kernel code, 3170K rwdata, 7128K rodata, 3968K init, 1093K bss, 474872K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000664] Console: colour dummy device 80x25 [ 0.001965] printk: console [tty0] enabled [ 0.002023] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002057] pid_max: default: 32768 minimum: 301 [ 0.002242] LSM: Security Framework initializing [ 0.002296] Yama: becoming mindful. [ 0.002330] SELinux: Initializing. [ 0.002465] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002499] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005301] rcu: Hierarchical SRCU implementation. [ 0.005518] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006446] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006486] DTB Build time: Nov 30 2022 10:34:23 [ 0.009188] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009431] Remapping and enabling EFI services. [ 0.011735] smp: Bringing up secondary CPUs ... [ 0.041065] Detected PIPT I-cache on CPU1 [ 0.041173] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072876] Detected PIPT I-cache on CPU2 [ 0.072981] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102559] Detected PIPT I-cache on CPU3 [ 0.102690] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132279] Detected PIPT I-cache on CPU4 [ 0.132471] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162075] Detected PIPT I-cache on CPU5 [ 0.162216] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162513] smp: Brought up 1 node, 6 CPUs [ 0.162715] SMP: Total of 6 processors activated. [ 0.162795] CPU features: detected: Privileged Access Never [ 0.162818] CPU features: detected: LSE atomic instructions [ 0.162831] CPU features: detected: User Access Override [ 0.162843] CPU features: detected: 32-bit EL0 Support [ 0.162854] CPU features: detected: RAS Extension Support [ 0.162865] CPU features: detected: CRC32 instructions [ 0.162877] CPU features: detected: 32-bit EL1 Support [ 0.231335] CPU: All CPU(s) started at EL2 [ 0.237643] devtmpfs: initialized [ 0.276987] Registered cp15_barrier emulation handler [ 0.277120] Registered setend emulation handler [ 0.277144] KASLR enabled [ 0.277390] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.277415] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.278759] pinctrl core: initialized pinctrl subsystem [ 0.279784] SMBIOS 3.0.0 present. [ 0.279837] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.280395] NET: Registered protocol family 16 [ 0.282317] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.282841] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.283550] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.283603] audit: initializing netlink subsys (disabled) [ 0.283871] audit: type=2000 audit(0.280:1): state=initialized audit_enabled=0 res=1 [ 0.284241] thermal_sys: Registered thermal governor 'step_wise' [ 0.284247] thermal_sys: Registered thermal governor 'power_allocator' [ 0.284259] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.286380] cpuidle: using governor menu [ 0.286709] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.287134] ASID allocator initialised with 32768 entries [ 0.287375] Serial: AMBA PL011 UART driver [ 0.291050] Tegra reboot handler registered. [ 0.357572] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.357745] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.357901] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.357986] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.358131] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.358209] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.358311] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.358364] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.358499] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.358563] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.360885] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.360916] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.360959] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.360983] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.361023] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.361046] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.361070] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.361091] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.361113] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.361135] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.361157] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.361179] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.361200] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.361222] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.361245] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.361268] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.361293] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.361389] mc-err: mcerr ops are set to t19x [ 0.374896] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.374922] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.374935] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.374948] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.382028] ACPI: Interpreter disabled. [ 0.383104] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.384335] iommu: Default domain type: Translated [ 0.384401] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.384806] SCSI subsystem initialized [ 0.384964] usbcore: registered new interface driver usbfs [ 0.385011] usbcore: registered new interface driver hub [ 0.385051] usbcore: registered new device driver usb [ 0.385364] mc: Linux media interface: v0.10 [ 0.385394] videodev: Linux video capture interface: v2.00 [ 0.385655] pps_core: LinuxPPS API ver. 1 registered [ 0.385666] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.385685] PTP clock support registered [ 0.385860] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.386193] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.386238] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.386774] Registered efivars operations [ 0.392226] FPGA manager framework [ 0.392301] Advanced Linux Sound Architecture Driver Initialized. [ 0.392862] Bluetooth: Core ver 2.22 [ 0.392899] NET: Registered protocol family 31 [ 0.392909] Bluetooth: HCI device and connection manager initialized [ 0.392923] Bluetooth: HCI socket layer initialized [ 0.392940] Bluetooth: L2CAP socket layer initialized [ 0.392958] Bluetooth: SCO socket layer initialized [ 0.394384] camchar: rtcpu character device driver loaded [ 0.395095] clocksource: Switched to clocksource arch_sys_counter [ 0.749145] VFS: Disk quotas dquot_6.6.0 [ 0.749222] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.749539] pnp: PnP ACPI: disabled [ 0.759176] la/ptsa driver initialized. [ 0.759286] NET: Registered protocol family 2 [ 0.759432] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.763959] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.764040] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.764338] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.764769] TCP: Hash tables configured (established 65536 bind 65536) [ 0.764887] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.764980] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.765161] NET: Registered protocol family 1 [ 0.766197] RPC: Registered named UNIX socket transport module. [ 0.766236] RPC: Registered udp transport module. [ 0.766250] RPC: Registered tcp transport module. [ 0.766263] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.766285] PCI: CLS 0 bytes, default 64 [ 0.766562] Trying to unpack rootfs image as initramfs... [ 1.029907] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.032932] Freeing initrd memory: 8196K [ 1.037377] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.037410] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.037463] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.037832] kvm [1]: IPA Size Limit: 40 bits [ 1.038364] kvm [1]: vgic interrupt IRQ9 [ 1.038849] kvm [1]: VHE mode initialized successfully [ 1.040674] Initialise system trusted keyrings [ 1.041020] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.050271] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.051543] NFS: Registering the id_resolver key type [ 1.051588] Key type id_resolver registered [ 1.051602] Key type id_legacy registered [ 1.051724] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.051748] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.051781] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.062081] NET: Registered protocol family 38 [ 1.062104] Key type asymmetric registered [ 1.062118] Asymmetric key parser 'x509' registered [ 1.062175] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.062449] io scheduler mq-deadline registered [ 1.062468] io scheduler kyber registered [ 1.069124] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.072555] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.072637] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.072732] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.072827] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.072918] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.078631] scrncapt: init (heads:4 wins:6 planes:4) [ 1.078641] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.079805] EINJ: ACPI disabled. [ 1.083152] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.083177] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.083192] tegra-pmc: ### PMC reset level: L1 [ 1.083205] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.083266] tegra-pmc: PMC Prod config success [ 1.088822] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.095030] random: fast init done [ 1.102900] printk: console [ttyTCU0] enabled [ 2.638992] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.644029] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.648464] arm-smmu 10000000.iommu: stage 1 translation [ 2.653977] arm-smmu 10000000.iommu: stage 2 translation [ 2.659494] arm-smmu 10000000.iommu: nested translation [ 2.664566] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.671732] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.682283] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.685148] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.691437] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.698987] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.704735] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.709184] arm-smmu 12000000.iommu: stage 1 translation [ 2.714949] arm-smmu 12000000.iommu: stage 2 translation [ 2.720116] arm-smmu 12000000.iommu: nested translation [ 2.725793] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.732725] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.743135] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.746082] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.752692] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.759774] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.769790] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.773174] tegra_profiler: auth: init [ 2.777393] THERMAL EST: found 3 subdevs [ 2.780769] THERMAL EST num_resources: 0 [ 2.784602] [THERMAL EST subdev 0] [ 2.787672] [THERMAL EST subdev 1] [ 2.791338] [THERMAL EST subdev 2] [ 2.794303] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.801003] THERMAL EST: thz register success. [ 2.805030] THERMAL EST: end of probe, return err: 0 [ 2.810274] nvsciipc: loaded module [ 2.817293] tun: Universal TUN/TAP device driver, 1.6 [ 2.819974] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.826356] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.831938] e1000e: Intel(R) PRO/1000 Network Driver [ 2.836827] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.842685] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.848206] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.854391] PPP generic driver version 2.4.2 [ 2.858683] PPP BSD Compression module registered [ 2.863181] PPP Deflate Compression module registered [ 2.868172] PPP MPPE Compression module registered [ 2.873190] usbcore: registered new interface driver r8152 [ 2.878956] usbcore: registered new interface driver asix [ 2.884308] usbcore: registered new interface driver ax88179_178a [ 2.890416] usbcore: registered new interface driver cdc_ether [ 2.896104] usbcore: registered new interface driver net1080 [ 2.901702] usbcore: registered new interface driver cdc_subset [ 2.907995] usbcore: registered new interface driver zaurus [ 2.913709] usbcore: registered new interface driver cdc_ncm [ 2.919137] usbcore: registered new interface driver aqc111 [ 2.924769] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.931133] ohci-pci: OHCI PCI platform driver [ 2.935392] ohci-platform: OHCI generic platform driver [ 2.940884] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.947327] usbcore: registered new interface driver uas [ 2.951433] usbcore: registered new interface driver usb-storage [ 2.957806] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.963789] mousedev: PS/2 mouse device common for all mice [ 2.968597] usbcore: registered new interface driver xpad [ 2.976752] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.979301] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.987385] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.993853] i2c /dev entries driver [ 2.996970] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.002723] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.008335] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.013476] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.018787] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.024520] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.029731] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.042291] device-mapper: uevent: version 1.0.3 [ 3.042756] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.049993] cpuidle: Initializing cpuidle driver [ 3.054120] sdhci: Secure Digital Host Controller Interface driver [ 3.059194] sdhci: Copyright(c) Pierre Ossman [ 3.063001] Synopsys Designware Multimedia Card Interface Driver [ 3.069203] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.075162] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.075816] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.088535] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.107312] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.116655] vdd-1v0: supplied by regulator-dummy [ 3.122155] vdd-1v8-hs: supplied by regulator-dummy [ 3.126977] vdd-1v8-ls: supplied by regulator-dummy [ 3.131819] vdd-1v8-ao: supplied by regulator-dummy [ 3.135723] vddio-ddr-1v1: supplied by regulator-dummy [ 3.140102] vdd-rtc: supplied by regulator-dummy [ 3.141753] spmic-ldo1: supplied by regulator-dummy [ 3.142949] vdd-ao-3v3: supplied by regulator-dummy [ 3.149121] vddio-emmc-3v3: supplied by regulator-dummy [ 3.155340] spmic-ldo4: supplied by regulator-dummy [ 3.156608] vdd-usb-3v3: supplied by regulator-dummy [ 3.162686] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.168834] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.174202] spmic-ldo8: supplied by vdd-1v8-ls [ 3.175638] gpio-510 (gpio_default): hogged as output/high [ 3.176960] gpio-511 (gpio_default): hogged as output/high [ 3.182111] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.320601] max77686-rtc max77620-rtc: registered as rtc0 [ 3.321567] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.321867] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.046847] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.047983] hid: raw HID events driver (C) Jiri Kosina [ 4.048695] usbcore: registered new interface driver usbhid [ 4.048860] usbhid: USB HID core driver [ 4.050593] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.051827] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.134753] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.210027] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.084 ms) ÿá[ 4.136785] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.137537] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.138689] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.139553] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.141254] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.141856] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.142402] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.143912] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.144256] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.146113] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.152726] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.159530] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.164137] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.171462] denver_knobs_init:MTS_VERSION:55637613 [ 4.183243] t19x_cache tegra-cache: probed [ 4.186213] optee: probing for conduit method. [ 4.187166] optee: revision 3.16 (65cc2218) [ 4.188462] optee: dynamic shared memory is enabled [ 4.191726] optee: initialized driver [ 4.198220] nvpmodel: initialized successfully [ 4.199433] tegra_hv: get_hvd: not initialized yet [ 4.204023] user_ivc_mempool: hypervisor not present [ 4.210417] usbcore: registered new interface driver snd-usb-audio [ 4.217236] u32 classifier [ 4.217707] input device check on [ 4.221554] Actions configured [ 4.225325] Initializing XFRM netlink socket [ 4.230346] NET: Registered protocol family 10 [ 4.237009] Segment Routing with IPv6 [ 4.237561] NET: Registered protocol family 17 [ 4.241658] NET: Registered protocol family 15 [ 4.246260] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.259903] Bluetooth: RFCOMM socket layer initialized [ 4.264576] Bluetooth: RFCOMM ver 1.11 [ 4.268463] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.274248] Bluetooth: HIDP socket layer initialized [ 4.279861] 9pnet: Installing 9P2000 support [ 4.283486] Key type dns_resolver registered [ 4.289176] registered taskstats version 1 [ 4.291910] Loading compiled-in X.509 certificates [ 4.305167] Loaded X.509 cert 'Build time autogenerated kernel key: 9be991da9d8ded22224dde3fe9c6150c611f6c26' [ 4.308041] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.317992] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.319930] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.328463] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.337233] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.455163] tegra194-pcie 14160000.pcie: Link up [ 4.458025] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.458246] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.458431] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.458690] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.458892] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.459339] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.459775] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.470820] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.471498] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.471960] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.473417] pci 0004:01:00.0: supports D1 D2 [ 4.473609] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.481097] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.481423] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.481668] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.482028] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.482319] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.483896] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.490010] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.497433] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.506045] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.515930] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.520951] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.526281] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.533198] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.541896] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.543685] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.552111] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.560892] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.667167] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.667826] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.668037] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.668196] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.668467] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.668709] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.669102] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.669508] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.684717] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.685182] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.686738] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.688201] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.689822] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.691378] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.692277] pci 0005:00:00.0: Removing from iommu group 7 [ 5.692550] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.722771] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.745638] host1x 13e10000.host1x: initialized [ 5.747573] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.748628] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.749638] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.750360] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.751485] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.752137] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.753003] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.753676] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.760378] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.767460] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.777372] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.784188] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.794497] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.801162] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.811262] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.818357] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.827925] falcon 15340000.vic: Adding to iommu group 17 [ 5.842447] falcon 15340000.vic: initialized [ 5.843438] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.848507] falcon 15380000.nvjpg: initialized [ 5.849094] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.860852] falcon 154c0000.nvenc: initialized [ 5.861382] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.870819] falcon 15a80000.nvenc1: initialized [ 5.871413] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.882829] nvdec 15480000.nvdec: initialized [ 5.883490] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.893088] nvdec 15140000.nvdec1: initialized [ 5.893660] tsec 15500000.tsec: Adding to iommu group 18 [ 5.899472] tsec 15500000.tsec: initialized [ 5.900052] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.908525] tsec 15100000.tsecb: initialized [ 5.912788] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.936168] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.947539] gpio-374 (wifi-enable): hogged as output/high [ 5.947865] gpio-431 (camera-control-output-low): hogged as output/low [ 5.948195] gpio-432 (camera-control-output-low): hogged as output/low [ 5.949925] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.951824] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.952812] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.959650] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.964979] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.970581] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.976235] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.984351] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.991704] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.002881] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.008504] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.014545] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.023163] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.032671] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.039839] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.047491] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.053419] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.063117] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.069548] pva 16000000.pva0: Adding to iommu group 22 [ 6.095619] pva 16000000.pva0: initialized [ 6.100694] pva 16800000.pva1: Adding to iommu group 23 [ 6.110911] pva 16800000.pva1: initialized [ 6.115575] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.127951] nvdla 15880000.nvdla0: initialized [ 6.129148] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.144932] nvdla 158c0000.nvdla1: initialized [ 6.147307] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.147542] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.147653] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.147868] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.147937] tegradccommon 15200000.display-hub: dma mapping done [ 6.148952] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.149528] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.149751] tegradc 15200000.display: Adding to iommu group 26 [ 6.150071] tegradc 15210000.display: Adding to iommu group 26 [ 6.153115] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.158754] tegradc 15210000.display: disp0 connected to head1->sor [ 6.158890] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.159035] tegradc 15210000.display: DT parsed successfully [ 6.159288] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.164764] tegra_cec 3960000.tegra_cec: probed [ 6.165742] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.171515] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.178639] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.184032] generic_infoframe_type: 0x87 [ 6.189990] kfuse 3830000.kfuse: initialized [ 6.197524] tegradc 15200000.display: DT parsed successfully [ 6.202646] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.207954] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.214620] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.249610] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.257232] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.264308] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.264318] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.278883] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.288021] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.292581] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.308488] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.309841] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.320992] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.321585] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.337663] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.343122] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.363143] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.363492] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.366264] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.374514] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.382955] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.389808] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.397432] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.404592] usb usb1: Product: xHCI Host Controller [ 6.409281] usb usb1: Manufacturer: Linux 5.10.104 xhci-hcd [ 6.415092] usb usb1: SerialNumber: 3610000.xhci [ 6.420692] hub 1-0:1.0: USB hub found [ 6.423625] hub 1-0:1.0: 4 ports detected [ 6.428439] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.433033] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.440886] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.448608] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.456300] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.463591] usb usb2: Product: xHCI Host Controller [ 6.468699] usb usb2: Manufacturer: Linux 5.10.104 xhci-hcd [ 6.474431] usb usb2: SerialNumber: 3610000.xhci [ 6.480597] hub 2-0:1.0: USB hub found [ 6.482618] hub 2-0:1.0: 4 ports detected [ 6.524187] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.529464] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.530536] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.530739] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.543751] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1900000 KHz, changing to: 1907200 KHz [ 6.544791] tegra194-cpufreq ccplex: probed with BWMGR [ 6.546066] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.546612] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.548880] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.557262] tegra194-vi5 15c10000.vi: initialized [ 6.558165] mmc0: CQHCI version 5.10 [ 6.558603] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.558869] generic_infoframe_type: 0x87 [ 6.559791] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.562449] tegradc 15200000.display: DT parsed successfully [ 6.569007] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.574500] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.582338] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.591190] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.595213] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.597052] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.605254] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.605258] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.605594] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.612879] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.612887] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.619877] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.621263] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.635137] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.635854] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.642280] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.642292] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.685414] tegradc 15200000.display: probed [ 6.691095] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.699850] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:07:6a:3b [ 6.715299] nvethernet 2490000.ethernet: Macsec not supported [ 6.722823] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.724017] mmc0: Command Queue Engine enabled [ 6.730266] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.733271] mmc0: periodic cache flush enabled [ 6.733289] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.733866] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.739429] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.743810] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.750140] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.765734] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.770514] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.790398] Console: switching to colour frame buffer device 480x135 [ 6.791560] tegra-se-nvhost 15810000.se: initialized [ 6.796213] tegradc 15200000.display: fb registered [ 6.806077] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.806221] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.812715] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.819219] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.825083] tegra-se-nvhost 15820000.se: initialized [ 6.835166] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.836908] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.847930] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.857372] tegra-se-nvhost 15830000.se: initialized [ 6.859869] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.865419] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.871894] tegra-se-nvhost 15840000.se: initialized [ 6.877367] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.883664] tegra_actmon d230000.actmon: in actmon_register()... [ 6.888161] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.894010] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.902299] hvc_sysfs: hypervisor is not present [ 6.910110] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.914678] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.921580] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.923426] tegradc 15200000.display: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 6.926294] usb 1-2: Manufacturer: Generic [ 6.932481] ALSA device list: [ 6.932487] No soundcards found. [ 6.937764] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.953093] hub 1-2:1.0: USB hub found [ 6.956061] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.963670] hub 1-2:1.0: 4 ports detected [ 6.963812] Extcon AUX1(HDMI) enable [ 6.971271] tegradc 15210000.display: disp1 connected to head1->sor [ 6.977766] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.984825] tegradc 15210000.display: DT parsed successfully [ 6.990113] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.998276] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.004606] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.017360] tegradc 15210000.display: probed [ 7.017730] tegradc 15210000.display: fb registered [ 7.023263] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.023959] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.027093] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.027103] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.029005] Freeing unused kernel memory: 3968K [ 7.052249] tegradc 15210000.display: blank - powerdown [ 7.057386] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.059210] Run /init as init process [ 7.065850] Extcon DP: HPD disabled [ 7.065855] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.065866] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.065871] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.072082] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.079583] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.092647] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.112725] usb 2-3: Manufacturer: Generic [ 7.130974] hub 2-3:1.0: USB hub found [ 7.134922] hub 2-3:1.0: 4 ports detected ÿâpll_d2 has no dyn ramp WARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.148577] tegradc 15200000.display: blank - powerdown [ 7.163932] Root device found: mmcblk0p1 [ 7.166382] Found dev node: /dev/mmcblk0p1 [ 7.175122] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.189020] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.189025] Extcon AUX1(HDMI) disable [ 7.200397] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.204230] Rootfs mounted over mmcblk0p1 [ 7.211137] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.212237] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.213233] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.234444] Switching from initrd to actual rootfs [ 7.238725] tegradc 15200000.display: unblank [ 7.239651] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.239658] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.240005] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.240195] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.249633] tegradc 15200000.display: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 7.251709] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.255715] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.255739] Extcon AUX1(HDMI) enable [ 7.268491] tegradc 15200000.display: sync windows ret = 247 [ 7.304285] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.311545] Extcon HDMI: HPD enabled [ 7.315165] tegradc 15200000.display: hdmi: plugged [ 7.360404] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.360680] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.360926] usb 1-3: Product: Bluetooth Radio [ 7.361067] usb 1-3: Manufacturer: Realtek [ 7.361198] usb 1-3: SerialNumber: 00e04c000001 [ 7.421284] systemd[1]: System time before build time, advancing clock. [ 7.442751] x_tables: module verification failed: signature and/or required key missing - tainting kernel [ 7.481361] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.483729] systemd[1]: Detected architecture arm64. [ 7.528298] systemd[1]: Set hostname to . [ 7.683124] usb 1-2.1: new high-speed USB device number 4 using tegra-xusb [ 7.784097] usb 1-2.1: New USB device found, idVendor=14cd, idProduct=8601, bcdDevice= 0.00 [ 7.784354] usb 1-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 7.784560] usb 1-2.1: Product: USB 2.0 Hub [ 7.784690] usb 1-2.1: Manufacturer: USB Device [ 7.786404] hub 1-2.1:1.0: USB hub found [ 7.786657] hub 1-2.1:1.0: 4 ports detected [ 8.014817] random: systemd: uninitialized urandom read (16 bytes read) [ 8.015296] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.015611] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.019752] systemd[1]: Created slice system-modprobe.slice. [ 8.020465] random: systemd: uninitialized urandom read (16 bytes read) [ 8.021805] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.031870] random: systemd: uninitialized urandom read (16 bytes read) [ 8.037045] systemd[1]: Created slice User and Session Slice. [ 8.045332] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.054157] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.061567] systemd[1]: Reached target User and Group Name Lookups. [ 8.068508] systemd[1]: Reached target Slices. [ 8.075105] usb 1-2.1.2: new low-speed USB device number 5 using tegra-xusb [ 8.078732] systemd[1]: Reached target Swap. [ 8.086409] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.093517] systemd[1]: Listening on Syslog Socket. [ 8.100532] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.107358] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.114932] systemd[1]: Listening on Journal Audit Socket. [ 8.121934] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.131959] systemd[1]: Listening on Journal Socket. [ 8.139273] systemd[1]: Listening on udev Control Socket. [ 8.146083] systemd[1]: Listening on udev Kernel Socket. [ 8.157717] systemd[1]: Mounting Huge Pages File System... [ 8.169332] systemd[1]: Mounting POSIX Message Queue File System... [ 8.180795] systemd[1]: Mounting RPC Pipe File System... [ 8.185456] usb 1-2.1.2: New USB device found, idVendor=04b3, idProduct=3025, bcdDevice= 1.09 [ 8.185463] usb 1-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.185468] usb 1-2.1.2: Product: USB NetVista Full Width Keyboard. [ 8.185471] usb 1-2.1.2: Manufacturer: LITE-ON Technology [ 8.192348] input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/0003:04B3:3025.0001/input/input1 [ 8.208643] systemd[1]: Mounting Kernel Debug File System... [ 8.220228] systemd[1]: Mounting Kernel Trace File System... [ 8.233506] systemd[1]: Starting Journal Service... [ 8.245627] systemd[1]: Starting Set the console keyboard layout... [ 8.257432] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.263445] hid-generic 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-3610000.xhci-2.1.2/input0 [ 8.269350] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.277338] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.289944] systemd[1]: Started Nameserver information manager. [ 8.297984] systemd[1]: Reached target Network (Pre). [ 8.307291] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.310724] random: crng init done [ 8.310945] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.314068] random: 7 urandom warning(s) missed due to ratelimiting [ 8.327023] systemd[1]: Starting Load Kernel Modules... [ 8.338226] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.347122] usb 1-2.1.3: new low-speed USB device number 6 using tegra-xusb [ 8.350604] systemd[1]: Starting udev Coldplug all Devices... [ 8.364440] systemd[1]: Mounted Huge Pages File System. [ 8.364659] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.364784] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.375553] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.375560] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.375569] nvmap_page_pool_init: Total RAM pages: 1752786 [ 8.375573] nvmap_page_pool_init: nvmap page pool size: 219098 pages (855 MB) [ 8.375774] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.375963] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.376117] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.376123] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.408801] systemd[1]: Mounted POSIX Message Queue File System. [ 8.416222] systemd[1]: Mounted RPC Pipe File System. [ 8.423937] systemd[1]: Mounted Kernel Debug File System. [ 8.430273] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.430273] [ 8.439134] systemd[1]: Mounted Kernel Trace File System. [ 8.448895] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.457689] systemd[1]: nvfb-udev.service: Succeeded. [ 8.459868] usb 1-2.1.3: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14 [ 8.465244] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.466039] usb 1-2.1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 8.474385] usb 1-2.1.3: Product: USB Optical Mouse [ 8.482003] input: USB Optical Mouse as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1.3/1-2.1.3:1.0/0003:1BCF:0005.0002/input/input2 [ 8.485955] hid-generic 0003:1BCF:0005.0002: input,hidraw1: USB HID v1.10 Mouse [USB Optical Mouse] on usb-3610000.xhci-2.1.3/input0 [ 8.492667] systemd[1]: Finished Load Kernel Modules. [ 8.502871] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.513851] systemd[1]: Finished Set the console keyboard layout. [ 8.522443] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.530818] systemd[1]: Mounting Kernel Configuration File System... [ 8.542642] systemd[1]: Started OP-TEE Client Supplicant. [ 8.554341] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.558268] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.567328] systemd[1]: Starting Load/Save Random Seed... [ 8.578870] systemd[1]: Starting Apply Kernel Variables... [ 8.590521] systemd[1]: Starting Create System Users... [ 8.604357] systemd[1]: Mounted Kernel Configuration File System. [ 10.246719] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.251912] imx219 9-0010: board setup failed [ 10.251991] imx219: probe of 9-0010 failed with error -121 [ 10.262991] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.362975] imx219 10-0010: board setup failed [ 10.386784] imx219: probe of 10-0010 failed with error -121 [ 10.482113] hot-surface-alert cooling state: 0 -> 1 [ 12.078509] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.078515] Creating 1 MTD partitions on "spi6.0": [ 12.078524] 0x000000000000-0x000002000000 : "Whole_flash0" [ 14.064175] IRQ268: set affinity failed(-22). [ 14.064632] CPU4: shutdown [ 14.124296] IRQ268: set affinity failed(-22). [ 14.124507] CPU5: shutdown [ 14.212806] hot-surface-alert cooling state: 1 -> 0 Ubuntu 20.04.4 LTS pcp-desktop ttyTCU0 pcp-desktop login: [ 70.344697] watchdog: watchdog0: watchdog did not stop! [ 70.763552] Trying to unregister non-registered hwtime source [ 73.820352] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 73.823396] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy ^@ÿâ [0000.024] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.032] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.055] I> Ram repair fuse : 0x0 [0000.058] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.077] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.093] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 59500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ^@ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.466] I> fixed regulator driver initialized [0003.481] I> register 'maxim' power off handle [0003.484] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.486] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.614] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.631] I> edid read success [0003.644] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.644] I> width = 3840, height = 2160, frequency = 594000000 [0003.645] I> width = 3840, height = 2160, frequency = 297000000 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1920, height = 1080, frequency = 148351648 [0003.650] I> width = 1920, height = 1080, frequency = 74175824 [0003.656] I> width = 1920, height = 1080, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 720, height = 480, frequency = 26973026 [0003.672] I> width = 720, height = 480, frequency = 26973026 [0003.678] I> width = 640, height = 480, frequency = 25174825 [0003.683] I> width = 3840, height = 2160, frequency = 593406593 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.724] I> hdmi_enable, starting HDMI initialisation [0003.728] I> hdmi_enable, HDMI initialisation complete [0003.738] initializing target [0003.739] calling apps_init() [0003.740] starting app kernel_boot_app [0003.740] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) ^[[2J^[[04D^[[=3h^[[2J^[[09D ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104 (root@frank-desktop) (aarch64-linux-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #3 SMP PREEMPT Wed Nov 30 10:34:26 CST 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943d018 ESRT=0x25944f718 RNG=0x27c595918 MEMRESERVE=0x25943ef18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f718 to 0x000000025944f750. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586effff] [ 0.000000] node 0: [mem 0x00000002586f0000-0x000000025871ffff] [ 0.000000] node 0: [mem 0x0000000258720000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933444K/7473852K available (18112K kernel code, 3170K rwdata, 7128K rodata, 3968K init, 1093K bss, 474872K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000693] Console: colour dummy device 80x25 [ 0.002137] printk: console [tty0] enabled [ 0.002201] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002234] pid_max: default: 32768 minimum: 301 [ 0.002450] LSM: Security Framework initializing [ 0.002503] Yama: becoming mindful. [ 0.002544] SELinux: Initializing. [ 0.002729] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002765] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005668] rcu: Hierarchical SRCU implementation. [ 0.005945] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006640] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006672] DTB Build time: Nov 30 2022 10:34:23 [ 0.010389] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010615] Remapping and enabling EFI services. [ 0.012609] smp: Bringing up secondary CPUs ... [ 0.041740] Detected PIPT I-cache on CPU1 [ 0.041843] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073497] Detected PIPT I-cache on CPU2 [ 0.073589] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103200] Detected PIPT I-cache on CPU3 [ 0.103300] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133007] Detected PIPT I-cache on CPU4 [ 0.133106] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162697] Detected PIPT I-cache on CPU5 [ 0.162833] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163173] smp: Brought up 1 node, 6 CPUs [ 0.163352] SMP: Total of 6 processors activated. [ 0.163396] CPU features: detected: Privileged Access Never [ 0.163430] CPU features: detected: LSE atomic instructions [ 0.163442] CPU features: detected: User Access Override [ 0.163454] CPU features: detected: 32-bit EL0 Support [ 0.163465] CPU features: detected: RAS Extension Support [ 0.163476] CPU features: detected: CRC32 instructions [ 0.163488] CPU features: detected: 32-bit EL1 Support [ 0.234195] CPU: All CPU(s) started at EL2 [ 0.239953] devtmpfs: initialized [ 0.280361] Registered cp15_barrier emulation handler [ 0.280467] Registered setend emulation handler [ 0.280486] KASLR enabled [ 0.280752] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.280777] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.283109] pinctrl core: initialized pinctrl subsystem [ 0.284287] SMBIOS 3.0.0 present. [ 0.284316] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.284967] NET: Registered protocol family 16 [ 0.287052] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.287589] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.288369] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.288421] audit: initializing netlink subsys (disabled) [ 0.288806] audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1 [ 0.289172] thermal_sys: Registered thermal governor 'step_wise' [ 0.289178] thermal_sys: Registered thermal governor 'power_allocator' [ 0.289192] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.291375] cpuidle: using governor menu [ 0.291733] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.292180] ASID allocator initialised with 32768 entries [ 0.292404] Serial: AMBA PL011 UART driver [ 0.295254] Tegra reboot handler registered. [ 0.360428] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.360606] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.360770] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.360813] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.360919] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.360983] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.361086] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.361125] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.361228] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.361265] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.363267] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.363315] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.363340] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.363369] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.363395] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.363419] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.363456] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.363486] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.363509] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.363531] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.363552] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.363573] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.363595] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.363616] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.363637] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.363659] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.363681] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.363763] mc-err: mcerr ops are set to t19x [ 0.375630] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.375651] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.375663] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.375674] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.381668] ACPI: Interpreter disabled. [ 0.382839] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.383927] iommu: Default domain type: Translated [ 0.383998] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.384320] SCSI subsystem initialized [ 0.384466] usbcore: registered new interface driver usbfs [ 0.384504] usbcore: registered new interface driver hub [ 0.384536] usbcore: registered new device driver usb [ 0.384918] mc: Linux media interface: v0.10 [ 0.384949] videodev: Linux video capture interface: v2.00 [ 0.385228] pps_core: LinuxPPS API ver. 1 registered [ 0.385239] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.385258] PTP clock support registered [ 0.385478] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.385733] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.385811] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.386424] Registered efivars operations [ 0.390914] FPGA manager framework [ 0.391003] Advanced Linux Sound Architecture Driver Initialized. [ 0.391569] Bluetooth: Core ver 2.22 [ 0.391609] NET: Registered protocol family 31 [ 0.391619] Bluetooth: HCI device and connection manager initialized [ 0.391633] Bluetooth: HCI socket layer initialized [ 0.391647] Bluetooth: L2CAP socket layer initialized [ 0.391666] Bluetooth: SCO socket layer initialized [ 0.393930] camchar: rtcpu character device driver loaded [ 0.395239] clocksource: Switched to clocksource arch_sys_counter [ 0.833816] VFS: Disk quotas dquot_6.6.0 [ 0.833898] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.834353] pnp: PnP ACPI: disabled [ 0.848016] la/ptsa driver initialized. [ 0.848228] NET: Registered protocol family 2 [ 0.848422] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.856321] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.856499] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.856858] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.857506] TCP: Hash tables configured (established 65536 bind 65536) [ 0.857706] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.857867] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.858118] NET: Registered protocol family 1 [ 0.858982] RPC: Registered named UNIX socket transport module. [ 0.859022] RPC: Registered udp transport module. [ 0.859041] RPC: Registered tcp transport module. [ 0.859059] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.859103] PCI: CLS 0 bytes, default 64 [ 0.859522] Trying to unpack rootfs image as initramfs... [ 1.128240] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.131127] Freeing initrd memory: 8196K [ 1.135645] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.135679] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.135713] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.136050] kvm [1]: IPA Size Limit: 40 bits [ 1.136584] kvm [1]: vgic interrupt IRQ9 [ 1.137145] kvm [1]: VHE mode initialized successfully [ 1.138819] Initialise system trusted keyrings [ 1.139181] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.146176] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.147063] NFS: Registering the id_resolver key type [ 1.147094] Key type id_resolver registered [ 1.147107] Key type id_legacy registered [ 1.147192] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.147213] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.147288] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.156691] NET: Registered protocol family 38 [ 1.156714] Key type asymmetric registered [ 1.156727] Asymmetric key parser 'x509' registered [ 1.156783] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.157030] io scheduler mq-deadline registered [ 1.157045] io scheduler kyber registered [ 1.162355] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.164998] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.165073] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.165137] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.165215] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.165277] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.170299] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.170501] scrncapt: init (heads:4 wins:6 planes:4) [ 1.171663] EINJ: ACPI disabled. [ 1.174708] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.174733] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.174746] tegra-pmc: ### PMC reset level: L1 [ 1.174759] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.174801] tegra-pmc: PMC Prod config success [ 1.179578] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.192480] random: fast init done [ 1.193067] printk: console [ttyTCU0] enabled [ 2.728967] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.734091] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.738665] arm-smmu 10000000.iommu: stage 1 translation [ 2.743978] arm-smmu 10000000.iommu: stage 2 translation [ 2.749669] arm-smmu 10000000.iommu: nested translation [ 2.754729] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.761905] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.772717] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.775287] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.781848] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.789233] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.794885] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.799609] arm-smmu 12000000.iommu: stage 1 translation [ 2.804861] arm-smmu 12000000.iommu: stage 2 translation [ 2.810286] arm-smmu 12000000.iommu: nested translation [ 2.815974] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.822895] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.833599] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.836271] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.842575] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.850163] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.859754] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.862980] tegra_profiler: auth: init [ 2.867516] THERMAL EST: found 3 subdevs [ 2.870645] THERMAL EST num_resources: 0 [ 2.874774] [THERMAL EST subdev 0] [ 2.878097] [THERMAL EST subdev 1] [ 2.881272] [THERMAL EST subdev 2] [ 2.884757] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.891261] THERMAL EST: thz register success. [ 2.895450] THERMAL EST: end of probe, return err: 0 [ 2.900419] nvsciipc: loaded module [ 2.907284] tun: Universal TUN/TAP device driver, 1.6 [ 2.909987] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.916520] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.921822] e1000e: Intel(R) PRO/1000 Network Driver [ 2.927033] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.932865] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.938409] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.944595] PPP generic driver version 2.4.2 [ 2.948845] PPP BSD Compression module registered [ 2.953363] PPP Deflate Compression module registered [ 2.958606] PPP MPPE Compression module registered [ 2.963386] usbcore: registered new interface driver r8152 [ 2.968900] usbcore: registered new interface driver asix [ 2.974456] usbcore: registered new interface driver ax88179_178a [ 2.980596] usbcore: registered new interface driver cdc_ether [ 2.986277] usbcore: registered new interface driver net1080 [ 2.992132] usbcore: registered new interface driver cdc_subset [ 2.997929] usbcore: registered new interface driver zaurus [ 3.003614] usbcore: registered new interface driver cdc_ncm [ 3.009297] usbcore: registered new interface driver aqc111 [ 3.014949] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.021276] ohci-pci: OHCI PCI platform driver [ 3.025325] ohci-platform: OHCI generic platform driver [ 3.031142] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.037783] usbcore: registered new interface driver uas [ 3.041868] usbcore: registered new interface driver usb-storage [ 3.047732] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.053690] mousedev: PS/2 mouse device common for all mice [ 3.058792] usbcore: registered new interface driver xpad [ 3.066994] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.069769] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.077549] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.083995] i2c /dev entries driver [ 3.087408] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.092943] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.098289] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.103704] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.109239] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.114753] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.120160] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.132764] device-mapper: uevent: version 1.0.3 [ 3.133215] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.140609] cpuidle: Initializing cpuidle driver [ 3.144467] sdhci: Secure Digital Host Controller Interface driver [ 3.149106] sdhci: Copyright(c) Pierre Ossman [ 3.153203] Synopsys Designware Multimedia Card Interface Driver [ 3.159655] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.165614] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.166318] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.178800] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.199567] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.208990] vdd-1v0: supplied by regulator-dummy [ 3.214517] vdd-1v8-hs: supplied by regulator-dummy [ 3.219423] vdd-1v8-ls: supplied by regulator-dummy [ 3.224276] vdd-1v8-ao: supplied by regulator-dummy [ 3.228107] vddio-ddr-1v1: supplied by regulator-dummy [ 3.232738] vdd-rtc: supplied by regulator-dummy [ 3.234468] spmic-ldo1: supplied by regulator-dummy [ 3.235876] vdd-ao-3v3: supplied by regulator-dummy [ 3.242259] vddio-emmc-3v3: supplied by regulator-dummy [ 3.248536] spmic-ldo4: supplied by regulator-dummy [ 3.249826] vdd-usb-3v3: supplied by regulator-dummy [ 3.256088] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.262289] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.267956] spmic-ldo8: supplied by vdd-1v8-ls [ 3.269396] gpio-510 (gpio_default): hogged as output/high [ 3.270740] gpio-511 (gpio_default): hogged as output/high [ 3.273637] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.411346] max77686-rtc max77620-rtc: registered as rtc0 [ 3.412628] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.412931] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.234173] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.235204] hid: raw HID events driver (C) Jiri Kosina [ 4.235960] usbcore: registered new interface driver usbhid [ 4.236099] usbhid: USB HID core driver [ 4.238112] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.239481] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.312389] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.387226] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.645 ms) ÿá[ 4.324348] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.324798] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.325875] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.326649] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.328266] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.329040] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.329668] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.331163] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.331463] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.334303] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.340965] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.347188] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.352484] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.358675] denver_knobs_init:MTS_VERSION:55637613 [ 4.370655] t19x_cache tegra-cache: probed [ 4.373345] optee: probing for conduit method. [ 4.374199] optee: revision 3.16 (65cc2218) [ 4.375104] optee: dynamic shared memory is enabled [ 4.379384] optee: initialized driver [ 4.385158] nvpmodel: initialized successfully [ 4.386532] tegra_hv: get_hvd: not initialized yet [ 4.391397] user_ivc_mempool: hypervisor not present [ 4.397244] usbcore: registered new interface driver snd-usb-audio [ 4.403640] u32 classifier [ 4.405043] input device check on [ 4.408832] Actions configured [ 4.412613] Initializing XFRM netlink socket [ 4.417282] NET: Registered protocol family 10 [ 4.423516] Segment Routing with IPv6 [ 4.424633] NET: Registered protocol family 17 [ 4.429153] NET: Registered protocol family 15 [ 4.433338] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.446788] Bluetooth: RFCOMM socket layer initialized [ 4.451586] Bluetooth: RFCOMM ver 1.11 [ 4.455782] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.461342] Bluetooth: HIDP socket layer initialized [ 4.467510] 9pnet: Installing 9P2000 support [ 4.470986] Key type dns_resolver registered [ 4.476347] registered taskstats version 1 [ 4.479539] Loading compiled-in X.509 certificates [ 4.491975] Loaded X.509 cert 'Build time autogenerated kernel key: 9be991da9d8ded22224dde3fe9c6150c611f6c26' [ 4.495129] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.504988] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.507110] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.515994] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.524084] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.639293] tegra194-pcie 14160000.pcie: Link up [ 4.642279] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.642463] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.642651] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.642891] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.643103] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.643486] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.644052] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.655953] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.656378] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.656892] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.658418] pci 0004:01:00.0: supports D1 D2 [ 4.658626] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.668942] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.669189] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.669475] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.669843] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.670134] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.670335] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.673931] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.681235] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.690027] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.700199] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.704788] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.710237] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.717400] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.726830] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.727913] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.736231] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.745030] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.860156] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.860767] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.861064] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.861230] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.861553] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.861765] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.862182] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.862645] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.883827] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.884183] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.885982] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.887644] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.889086] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.890829] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.891951] pci 0005:00:00.0: Removing from iommu group 7 [ 5.892167] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.924568] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.945586] host1x 13e10000.host1x: initialized [ 5.947002] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.947965] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.949055] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.949865] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.950822] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.951578] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.952614] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.953299] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.954214] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.960291] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.970303] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.977131] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.987067] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.994348] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.004214] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.011439] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.021116] falcon 15340000.vic: Adding to iommu group 17 [ 6.035690] falcon 15340000.vic: initialized [ 6.036501] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.041596] falcon 15380000.nvjpg: initialized [ 6.042135] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.053403] falcon 154c0000.nvenc: initialized [ 6.053914] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.063651] falcon 15a80000.nvenc1: initialized [ 6.064226] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.076852] nvdec 15480000.nvdec: initialized [ 6.077520] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.087366] nvdec 15140000.nvdec1: initialized [ 6.087937] tsec 15500000.tsec: Adding to iommu group 18 [ 6.092960] tsec 15500000.tsec: initialized [ 6.093468] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.101243] tsec 15100000.tsecb: initialized [ 6.104834] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.129270] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.141163] gpio-374 (wifi-enable): hogged as output/high [ 6.141479] gpio-431 (camera-control-output-low): hogged as output/low [ 6.141784] gpio-432 (camera-control-output-low): hogged as output/low [ 6.143436] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.144952] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.145771] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.152203] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.157556] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.163706] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.169006] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.177314] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.184995] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.196300] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.201520] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.207543] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.216373] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.225415] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.233005] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.240275] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.246721] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.256115] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.262599] pva 16000000.pva0: Adding to iommu group 22 [ 6.288092] pva 16000000.pva0: initialized [ 6.292938] pva 16800000.pva1: Adding to iommu group 23 [ 6.310552] pva 16800000.pva1: initialized [ 6.314543] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.328048] nvdla 15880000.nvdla0: initialized [ 6.329481] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.338122] nvdla 158c0000.nvdla1: initialized [ 6.341762] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.342041] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.342573] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.342894] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.342938] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.343412] tegradccommon 15200000.display-hub: dma mapping done [ 6.343535] tegradc 15200000.display: Adding to iommu group 26 [ 6.343544] tegradc 15210000.display: Adding to iommu group 26 [ 6.345493] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.351533] tegradc 15210000.display: disp0 connected to head1->sor [ 6.352454] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.358011] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.364106] tegra_cec 3960000.tegra_cec: probed [ 6.369972] tegradc 15210000.display: DT parsed successfully [ 6.378206] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.381780] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.382014] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.389642] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.393492] generic_infoframe_type: 0x87 [ 6.401381] kfuse 3830000.kfuse: initialized [ 6.407768] tegradc 15200000.display: DT parsed successfully [ 6.414974] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.418049] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.422198] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.422819] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.455670] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.456440] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.463257] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.463265] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.480952] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.490613] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.494611] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.500938] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.516935] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.522577] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.522811] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.537979] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.550236] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.553717] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.559445] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.567690] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.576393] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.582690] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.590274] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.597528] usb usb1: Product: xHCI Host Controller [ 6.602696] usb usb1: Manufacturer: Linux 5.10.104 xhci-hcd [ 6.608345] usb usb1: SerialNumber: 3610000.xhci [ 6.614121] hub 1-0:1.0: USB hub found [ 6.616898] hub 1-0:1.0: 4 ports detected [ 6.621546] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.626269] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.633865] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.641566] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.649480] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.656486] usb usb2: Product: xHCI Host Controller [ 6.661678] usb usb2: Manufacturer: Linux 5.10.104 xhci-hcd [ 6.667375] usb usb2: SerialNumber: 3610000.xhci [ 6.672642] hub 2-0:1.0: USB hub found [ 6.675605] hub 2-0:1.0: 4 ports detected [ 6.714278] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.719934] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.721150] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.721376] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.735114] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.736176] tegra194-cpufreq ccplex: probed with BWMGR [ 6.737445] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.738133] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.740215] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.747308] tegra194-vi5 15c10000.vi: initialized [ 6.748629] tegradc 15210000.display: disp0 connected to head1->sor [ 6.748945] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.749837] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.755251] tegradc 15210000.display: DT parsed successfully [ 6.761434] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.766977] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.768089] mmc0: CQHCI version 5.10 [ 6.775100] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.782571] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.786357] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.786367] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.792517] generic_infoframe_type: 0x87 [ 6.799291] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.823012] tegradc 15200000.display: DT parsed successfully [ 6.828895] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.829031] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.837535] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.842891] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.842969] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.842980] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.851276] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.851279] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.851629] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.860433] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:07:6a:3b [ 6.865794] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.867002] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.879297] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.880955] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.889000] nvethernet 2490000.ethernet: Macsec not supported [ 6.929231] mmc0: Command Queue Engine enabled [ 6.931343] tegradc 15200000.display: probed [ 6.932235] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.933302] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.933425] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.933536] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.933588] random: crng init done [ 6.934746] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.936342] tegra-se-nvhost 15810000.se: initialized [ 6.936621] mmc0: periodic cache flush enabled [ 6.941525] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.945091] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.945777] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.953780] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.959210] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.023605] tegra-se-nvhost 15820000.se: initialized [ 7.023738] Console: switching to colour frame buffer device 480x135 [ 7.025370] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.027608] tegradc 15200000.display: fb registered [ 7.027677] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.034356] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.034544] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.035312] tegra-se-nvhost 15830000.se: initialized [ 7.036398] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.036896] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.037532] tegra-se-nvhost 15840000.se: initialized [ 7.039154] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.040770] tegra_actmon d230000.actmon: in actmon_register()... [ 7.041372] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.041584] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.050660] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.051020] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.059262] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.059267] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.059271] usb 1-2: Manufacturer: Generic [ 7.061606] hub 1-2:1.0: USB hub found [ 7.065511] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.082259] hub 1-2:1.0: 4 ports detected [ 7.088209] hvc_sysfs: hypervisor is not present [ 7.106577] tegradc 15200000.display: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 7.136020] ALSA device list: [ 7.174056] No soundcards found. [ 7.175875] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.187657] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.191101] Extcon AUX1(HDMI) enable [ 7.194676] tegradc 15210000.display: disp1 connected to head1->sor [ 7.196112] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.201078] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.215614] tegradc 15210000.display: DT parsed successfully [ 7.221250] tegradc 15210000.display: Display dc.000000005063336e registered with id=1 [ 7.228948] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.235158] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.244955] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.247980] tegradc 15210000.display: probed [ 7.249658] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.261294] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.261298] usb 2-3: Manufacturer: Generic [ 7.269960] tegradc 15210000.display: fb registered [ 7.271876] hub 2-3:1.0: USB hub found [ 7.278550] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.280884] Freeing unused kernel memory: 3968K [ 7.281036] hub 2-3:1.0: 4 ports detected [ 7.286515] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.286528] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.308129] tegradc 15210000.display: blank - powerdown [ 7.313542] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.321579] Extcon DP: HPD disabled [ 7.325252] hpd: switching from state 0 (Reset) to state 1 (Check Plug) ÿâpll_d2 has no dyn ramp WARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.331845] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.331851] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.331939] tegradc 15200000.display: blank - powerdown [ 7.339368] Run /init as init process [ 7.359280] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.367267] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.372108] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.372112] Extcon AUX1(HDMI) disable [ 7.395340] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.396343] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.419564] tegradc 15200000.display: unblank [ 7.420866] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.421082] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.423860] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.423866] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.430287] tegradc 15200000.display: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 7.432358] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.436350] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.436354] Extcon AUX1(HDMI) enable [ 7.449135] tegradc 15200000.display: sync windows ret = 247 [ 7.476235] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.483682] Extcon HDMI: HPD enabled [ 7.487245] tegradc 15200000.display: hdmi: plugged [ 7.516535] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.516821] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.517043] usb 1-3: Product: Bluetooth Radio [ 7.517215] usb 1-3: Manufacturer: Realtek [ 7.517334] usb 1-3: SerialNumber: 00e04c000001 [ 7.526533] Root device found: mmcblk0p1 [ 7.528690] Found dev node: /dev/mmcblk0p1 [ 7.563133] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.567477] Rootfs mounted over mmcblk0p1 [ 7.597161] Switching from initrd to actual rootfs [ 7.738700] systemd[1]: System time before build time, advancing clock. [ 7.760058] x_tables: module verification failed: signature and/or required key missing - tainting kernel [ 7.798890] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.801301] systemd[1]: Detected architecture arm64. [ 7.803328] usb 1-2.1: new high-speed USB device number 4 using tegra-xusb [ 7.850916] systemd[1]: Set hostname to . [ 7.912118] usb 1-2.1: New USB device found, idVendor=14cd, idProduct=8601, bcdDevice= 0.00 [ 7.912396] usb 1-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 7.912589] usb 1-2.1: Product: USB 2.0 Hub [ 7.912786] usb 1-2.1: Manufacturer: USB Device [ 7.916586] hub 1-2.1:1.0: USB hub found [ 7.916878] hub 1-2.1:1.0: 4 ports detected [ 8.203283] usb 1-2.1.2: new low-speed USB device number 5 using tegra-xusb [ 8.309734] usb 1-2.1.2: New USB device found, idVendor=04b3, idProduct=3025, bcdDevice= 1.09 [ 8.309995] usb 1-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.310214] usb 1-2.1.2: Product: USB NetVista Full Width Keyboard. [ 8.310374] usb 1-2.1.2: Manufacturer: LITE-ON Technology [ 8.317307] input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/0003:04B3:3025.0001/input/input1 [ 8.330278] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.330643] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.334787] systemd[1]: Created slice system-modprobe.slice. [ 8.345230] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.354219] systemd[1]: Created slice User and Session Slice. [ 8.362001] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.370057] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.375699] hid-generic 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-3610000.xhci-2.1.2/input0 [ 8.381038] systemd[1]: Reached target User and Group Name Lookups. [ 8.388126] systemd[1]: Reached target Slices. [ 8.395010] systemd[1]: Reached target Swap. [ 8.402939] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.410105] systemd[1]: Listening on Syslog Socket. [ 8.417182] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.423995] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.434366] systemd[1]: Listening on Journal Audit Socket. [ 8.441530] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.448691] systemd[1]: Listening on Journal Socket. [ 8.455305] usb 1-2.1.3: new low-speed USB device number 6 using tegra-xusb [ 8.455800] systemd[1]: Listening on udev Control Socket. [ 8.465446] systemd[1]: Listening on udev Kernel Socket. [ 8.476730] systemd[1]: Mounting Huge Pages File System... [ 8.487994] systemd[1]: Mounting POSIX Message Queue File System... [ 8.499149] systemd[1]: Mounting RPC Pipe File System... [ 8.510697] systemd[1]: Mounting Kernel Debug File System... [ 8.521971] systemd[1]: Mounting Kernel Trace File System... [ 8.534710] systemd[1]: Starting Journal Service... [ 8.546592] systemd[1]: Starting Set the console keyboard layout... [ 8.558799] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.563963] usb 1-2.1.3: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14 [ 8.563968] usb 1-2.1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 8.563971] usb 1-2.1.3: Product: USB Optical Mouse [ 8.571259] input: USB Optical Mouse as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1.3/1-2.1.3:1.0/0003:1BCF:0005.0002/input/input2 [ 8.579534] hid-generic 0003:1BCF:0005.0002: input,hidraw1: USB HID v1.10 Mouse [USB Optical Mouse] on usb-3610000.xhci-2.1.3/input0 [ 8.583265] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.591455] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.603828] systemd[1]: Started Nameserver information manager. [ 8.611594] systemd[1]: Reached target Network (Pre). [ 8.620509] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.624112] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.634240] systemd[1]: Starting Load Kernel Modules... [ 8.646673] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.659210] systemd[1]: Starting udev Coldplug all Devices... [ 8.671067] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.673024] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.673109] systemd[1]: Mounted Huge Pages File System. [ 8.674954] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.684592] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.684612] nvmap_page_pool_init: Total RAM pages: 1752786 [ 8.691167] nvmap_page_pool_init: nvmap page pool size: 219098 pages (855 MB) [ 8.695425] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.695593] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.695725] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.695738] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.714597] systemd[1]: Mounted POSIX Message Queue File System. [ 8.722340] systemd[1]: Mounted RPC Pipe File System. [ 8.729773] systemd[1]: Mounted Kernel Debug File System. [ 8.736994] systemd[1]: Mounted Kernel Trace File System. [ 8.747412] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.758202] systemd[1]: nvfb-udev.service: Succeeded. [ 8.761793] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.761793] [ 8.764051] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.781968] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.791558] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.795398] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.803356] systemd[1]: Starting Load/Save Random Seed... [ 8.815712] systemd[1]: Starting Create System Users... [ 8.827685] systemd[1]: Finished Set the console keyboard layout. [ 8.840012] systemd[1]: Finished Load Kernel Modules. [ 8.850755] systemd[1]: Finished Load/Save Random Seed. [ 8.861015] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.869609] systemd[1]: Mounting Kernel Configuration File System... [ 8.880921] systemd[1]: Started OP-TEE Client Supplicant. [ 8.892911] systemd[1]: Starting Apply Kernel Variables... [ 8.908074] systemd[1]: Mounted Kernel Configuration File System. [ 10.442449] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.447626] imx219 9-0010: board setup failed [ 10.451422] imx219: probe of 9-0010 failed with error -121 [ 10.464203] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.477184] imx219 10-0010: board setup failed [ 10.480489] imx219: probe of 10-0010 failed with error -121 [ 10.680650] hot-surface-alert cooling state: 0 -> 1 [ 12.082092] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.082098] Creating 1 MTD partitions on "spi6.0": [ 12.082107] 0x000000000000-0x000002000000 : "Whole_flash0" [ 13.852550] IRQ269: set affinity failed(-22). [ 13.852746] CPU4: shutdown [ 13.920492] IRQ269: set affinity failed(-22). [ 13.920699] CPU5: shutdown [ 14.007667] hot-surface-alert cooling state: 1 -> 0 Ubuntu 20.04.4 LTS pcp-desktop ttyTCU0 pcp-desktop login: [ 51.332774] watchdog: watchdog0: watchdog did not stop! [ 51.732029] Trying to unregister non-registered hwtime source [ 54.793243] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 54.796238] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy : 1, badf1301, badf1301,^@^@ÿâ [0000.024] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.032] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.055] I> Ram repair fuse : 0x0 [0000.058] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.077] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.093] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 61000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ^@ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> hdmi cable connected [0003.611] W> set volts not configured for 'vdd-1v0' [0003.616] W> set volts not configured for 'vdd-1v8-hs' [0003.617] I> retrieved tmds range from prod_list_hdmi_soc [0003.622] E> invalid display type [0003.624] E> cannot find any other nvdisp nodes [0003.640] I> edid read success [0003.653] I> edid read success [0003.653] I> width = 640, height = 480, frequency = 25174825 [0003.653] I> width = 3840, height = 2160, frequency = 594000000 [0003.654] I> width = 3840, height = 2160, frequency = 297000000 [0003.654] I> width = 1920, height = 1080, frequency = 148500000 [0003.654] I> width = 1920, height = 1080, frequency = 148351648 [0003.659] I> width = 1920, height = 1080, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 74175824 [0003.670] I> width = 1280, height = 720, frequency = 74175824 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 640, height = 480, frequency = 25174825 [0003.693] I> width = 3840, height = 2160, frequency = 593406593 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 3840, height = 2160, frequency = 296703296 [0003.721] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.748] calling apps_init() [0003.749] starting app kernel_boot_app [0003.750] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) ^[[2J^[[04D^[[=3h^[[2J^[[09D ** WARNING: Test Key is used. ** L4TLauncher: Attempting Recovery Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104 (root@frank-desktop) (aarch64-linux-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #3 SMP PREEMPT Wed Nov 30 10:34:26 CST 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] printk: bootconsole [tegra_comb_uart0] enabled [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fb98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fb98 to 0x000000025944fbd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586effff] [ 0.000000] node 0: [mem 0x00000002586f0000-0x000000025871ffff] [ 0.000000] node 0: [mem 0x0000000258720000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/initrd rw rootwait console=ttyTCU0,115200n8 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 sdhci_tegra.en_boot_part_access=1 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6929756K/7473852K available (18112K kernel code, 3170K rwdata, 7128K rodata, 3968K init, 1093K bss, 478560K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.008439] Console: colour dummy device 80x25 [ 0.012391] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022242] pid_max: default: 32768 minimum: 301 [ 0.027226] LSM: Security Framework initializing [ 0.031554] Yama: becoming mindful. [ 0.035461] SELinux: Initializing. [ 0.039201] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.046676] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.057250] rcu: Hierarchical SRCU implementation. [ 0.059475] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.067880] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.080805] DTB Build time: Nov 30 2022 10:34:23 [ 0.088040] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.092617] Remapping and enabling EFI services. [ 0.098641] smp: Bringing up secondary CPUs ... ÿä: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.194409] Detected PIPT I-cache on CPU1 [ 0.194498] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.226617] Detected PIPT I-cache on CPU2 [ 0.226760] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.256293] Detected PIPT I-cache on CPU3 [ 0.256423] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.286106] Detected PIPT I-cache on CPU4 [ 0.286290] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.316070] Detected PIPT I-cache on CPU5 [ 0.316261] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.316595] smp: Brought up 1 node, 6 CPUs [ 0.317740] SMP: Total of 6 processors activated. [ 0.317847] CPU features: detected: Privileged Access Never [ 0.317963] CPU features: detected: LSE atomic instructions [ 0.318119] CPU features: detected: User Access Override [ 0.318519] CPU features: detected: 32-bit EL0 Support [ 0.318937] CPU features: detected: RAS Extension Support [ 0.319286] CPU features: detected: CRC32 instructions [ 0.320026] CPU features: detected: 32-bit EL1 Support [ 0.393750] CPU: All CPU(s) started at EL2 [ 0.399873] devtmpfs: initialized [ 0.446898] Registered cp15_barrier emulation handler [ 0.447117] Registered setend emulation handler [ 0.447209] KASLR enabled [ 0.447542] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.447705] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.449214] pinctrl core: initialized pinctrl subsystem [ 0.450409] SMBIOS 3.0.0 present. [ 0.450494] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.451358] NET: Registered protocol family 16 [ 0.453370] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.454034] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.454923] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.455140] audit: initializing netlink subsys (disabled) [ 0.455468] audit: type=2000 audit(0.408:1): state=initialized audit_enabled=0 res=1 [ 0.455890] thermal_sys: Registered thermal governor 'step_wise' [ 0.455897] thermal_sys: Registered thermal governor 'power_allocator' [ 0.456010] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.460289] cpuidle: using governor menu [ 0.468833] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.475732] ASID allocator initialised with 32768 entries [ 0.480991] Serial: AMBA PL011 UART driver [ 0.487913] Tegra reboot handler registered. [ 0.552156] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.552415] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.552772] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.552931] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.553186] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.553363] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.553649] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.553841] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.554105] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.554247] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.560290] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.564675] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.571135] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.577619] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.584088] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.590664] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.597220] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.603709] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.610247] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.616729] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.623193] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.629420] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.636062] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.642485] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.648848] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.655004] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.661619] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.668090] mc-err: mcerr ops are set to t19x [ 0.683730] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.683891] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.685574] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.692228] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.705996] ACPI: Interpreter disabled. [ 0.707249] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.708504] iommu: Default domain type: Translated [ 0.712259] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.718514] SCSI subsystem initialized [ 0.722252] usbcore: registered new interface driver usbfs [ 0.727474] usbcore: registered new interface driver hub [ 0.732968] usbcore: registered new device driver usb [ 0.738375] mc: Linux media interface: v0.10 [ 0.742372] videodev: Linux video capture interface: v2.00 [ 0.748167] pps_core: LinuxPPS API ver. 1 registered [ 0.752688] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.761792] PTP clock support registered [ 0.765591] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.772726] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.779638] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.786530] Registered efivars operations [ 0.795281] FPGA manager framework [ 0.795435] Advanced Linux Sound Architecture Driver Initialized. [ 0.800176] Bluetooth: Core ver 2.22 [ 0.803188] NET: Registered protocol family 31 [ 0.807458] Bluetooth: HCI device and connection manager initialized [ 0.813854] Bluetooth: HCI socket layer initialized [ 0.818839] Bluetooth: L2CAP socket layer initialized [ 0.824097] Bluetooth: SCO socket layer initialized [ 0.830664] camchar: rtcpu character device driver loaded [ 0.835393] clocksource: Switched to clocksource arch_sys_counter [ 1.178420] VFS: Disk quotas dquot_6.6.0 [ 1.178561] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.178977] pnp: PnP ACPI: disabled [ 1.191095] la/ptsa driver initialized. [ 1.191309] NET: Registered protocol family 2 [ 1.191554] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.197423] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.197612] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.198043] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.198584] TCP: Hash tables configured (established 65536 bind 65536) [ 1.198851] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.199084] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.199476] NET: Registered protocol family 1 [ 1.200268] RPC: Registered named UNIX socket transport module. [ 1.200412] RPC: Registered udp transport module. [ 1.200508] RPC: Registered tcp transport module. [ 1.200612] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.200740] PCI: CLS 0 bytes, default 64 [ 1.201155] Trying to unpack rootfs image as initramfs... [ 1.472403] Freeing initrd memory: 11884K [ 1.475767] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.475911] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.476036] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.476412] kvm [1]: IPA Size Limit: 40 bits [ 1.476935] kvm [1]: vgic interrupt IRQ9 [ 1.477476] kvm [1]: VHE mode initialized successfully [ 1.478730] Initialise system trusted keyrings [ 1.479064] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.483989] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.484729] NFS: Registering the id_resolver key type [ 1.484872] Key type id_resolver registered [ 1.484970] Key type id_legacy registered [ 1.485140] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.485285] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.485443] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.493483] NET: Registered protocol family 38 [ 1.493569] Key type asymmetric registered [ 1.493655] Asymmetric key parser 'x509' registered [ 1.493795] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.494138] io scheduler mq-deadline registered [ 1.494240] io scheduler kyber registered [ 1.500584] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.504902] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.508657] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.514246] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.519762] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.525694] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.534898] scrncapt: init (heads:4 wins:6 planes:4) [ 1.535156] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.537039] EINJ: ACPI disabled. [ 1.548540] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.553294] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.558184] tegra-pmc: ### PMC reset level: L1 [ 1.562470] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.567752] tegra-pmc: PMC Prod config success [ 1.576064] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.580338] printk: console [ttyTCU0] enabled [ 1.580338] printk: console [ttyTCU0] enabled [ 1.586745] printk: bootconsole [tegra_comb_uart0] disabled [ 1.586745] printk: bootconsole [tegra_comb_uart0] disabled [ 1.598737] arm-smmu 10000000.iommu: probing hardware configuration... [ 1.604508] arm-smmu 10000000.iommu: SMMUv2 with: [ 1.609493] arm-smmu 10000000.iommu: stage 1 translation [ 1.614814] arm-smmu 10000000.iommu: stage 2 translation [ 1.620147] arm-smmu 10000000.iommu: nested translation [ 1.625316] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 1.632673] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 1.642205] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 1.646138] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.652352] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.659645] arm-smmu 12000000.iommu: probing hardware configuration... [ 1.665305] arm-smmu 12000000.iommu: SMMUv2 with: [ 1.670021] arm-smmu 12000000.iommu: stage 1 translation [ 1.675272] arm-smmu 12000000.iommu: stage 2 translation [ 1.680954] arm-smmu 12000000.iommu: nested translation [ 1.686383] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 1.693302] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 1.702764] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 1.706688] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.713253] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.720454] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 1.729830] tegra_profiler: version: 1.147, samples/io: 49/28 [ 1.733636] tegra_profiler: auth: init [ 1.737776] THERMAL EST: found 3 subdevs [ 1.741338] THERMAL EST num_resources: 0 [ 1.744926] [THERMAL EST subdev 0] [ 1.748251] [THERMAL EST subdev 1] [ 1.751916] [THERMAL EST subdev 2] [ 1.754890] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.761322] THERMAL EST: thz register success. [ 1.765868] THERMAL EST: end of probe, return err: 0 [ 1.770828] nvsciipc: loaded module [ 1.777113] tun: Universal TUN/TAP device driver, 1.6 [ 1.780132] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 1.786672] hns3: Copyright (c) 2017 Huawei Corporation. [ 1.792224] e1000e: Intel(R) PRO/1000 Network Driver [ 1.797164] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.803512] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.808803] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.814615] PPP generic driver version 2.4.2 [ 1.819187] PPP BSD Compression module registered [ 1.823510] PPP Deflate Compression module registered [ 1.829013] PPP MPPE Compression module registered [ 1.833765] usbcore: registered new interface driver r8152 [ 1.839274] usbcore: registered new interface driver asix [ 1.844868] usbcore: registered new interface driver ax88179_178a [ 1.850986] usbcore: registered new interface driver cdc_ether [ 1.856933] usbcore: registered new interface driver net1080 [ 1.862533] usbcore: registered new interface driver cdc_subset [ 1.868318] usbcore: registered new interface driver zaurus [ 1.874033] usbcore: registered new interface driver cdc_ncm [ 1.879713] usbcore: registered new interface driver aqc111 [ 1.885347] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.891685] ohci-pci: OHCI PCI platform driver [ 1.895983] ohci-platform: OHCI generic platform driver [ 1.901680] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 1.907589] usbcore: registered new interface driver uas [ 1.912008] usbcore: registered new interface driver usb-storage [ 1.918055] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 1.924220] mousedev: PS/2 mouse device common for all mice [ 1.929190] usbcore: registered new interface driver xpad [ 1.937099] tegra_rtc c2a0000.rtc: registered as rtc1 [ 1.940176] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 1.947685] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.954445] i2c /dev entries driver [ 1.957585] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 1.963210] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 1.968915] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 1.974256] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 1.979375] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 1.984857] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 1.990534] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.001046] device-mapper: uevent: version 1.0.3 [ 2.001434] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.010521] cpuidle: Initializing cpuidle driver [ 2.014569] sdhci: Secure Digital Host Controller Interface driver [ 2.019522] sdhci: Copyright(c) Pierre Ossman [ 2.023613] Synopsys Designware Multimedia Card Interface Driver [ 2.030096] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.035811] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.036461] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.049073] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.064893] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.073567] vdd-1v0: supplied by regulator-dummy [ 2.078974] vdd-1v8-hs: supplied by regulator-dummy [ 2.083718] vdd-1v8-ls: supplied by regulator-dummy [ 2.088420] vdd-1v8-ao: supplied by regulator-dummy [ 2.092116] vddio-ddr-1v1: supplied by regulator-dummy [ 2.096408] vdd-rtc: supplied by regulator-dummy [ 2.097947] spmic-ldo1: supplied by regulator-dummy [ 2.099115] vdd-ao-3v3: supplied by regulator-dummy [ 2.105901] vddio-emmc-3v3: supplied by regulator-dummy [ 2.111910] spmic-ldo4: supplied by regulator-dummy [ 2.113047] vdd-usb-3v3: supplied by regulator-dummy [ 2.120823] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 2.126830] vdd-csi-1v2: supplied by vdd-1v8-ls [ 2.132238] spmic-ldo8: supplied by vdd-1v8-ls [ 2.133533] gpio-510 (gpio_default): hogged as output/high [ 2.135766] gpio-511 (gpio_default): hogged as output/high [ 2.142572] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 2.280935] max77686-rtc max77620-rtc: registered as rtc0 [ 2.282004] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 2.282319] max77620 4-003c: max77620 probe successful [ 2.288205] random: fast init done ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 2.974082] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.974919] hid: raw HID events driver (C) Jiri Kosina [ 2.975649] usbcore: registered new interface driver usbhid [ 2.975810] usbhid: USB HID core driver [ 2.977519] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 2.978554] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.039092] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.114738] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.456 ms) ÿá[ 3.063900] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.064431] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.065419] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.066054] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.067669] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.068219] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.068792] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.070157] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.070471] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.072388] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.080610] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.086642] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.091865] tegra186-aondbg aondbg: aondbg driver probe() OK [ 3.098535] denver_knobs_init:MTS_VERSION:55637613 [ 3.110396] t19x_cache tegra-cache: probed [ 3.112690] optee: probing for conduit method. [ 3.113457] optee: revision 3.16 (65cc2218) [ 3.114256] optee: dynamic shared memory is enabled [ 3.118790] optee: initialized driver [ 3.124920] nvpmodel: initialized successfully [ 3.126775] tegra_hv: get_hvd: not initialized yet [ 3.131531] user_ivc_mempool: hypervisor not present [ 3.137069] usbcore: registered new interface driver snd-usb-audio [ 3.143727] u32 classifier [ 3.145177] input device check on [ 3.148946] Actions configured [ 3.152243] Initializing XFRM netlink socket [ 3.157073] NET: Registered protocol family 10 [ 3.163250] Segment Routing with IPv6 [ 3.164840] NET: Registered protocol family 17 [ 3.168761] NET: Registered protocol family 15 [ 3.173420] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.187014] Bluetooth: RFCOMM socket layer initialized [ 3.191781] Bluetooth: RFCOMM ver 1.11 [ 3.195382] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.201196] Bluetooth: HIDP socket layer initialized [ 3.207186] 9pnet: Installing 9P2000 support [ 3.210897] Key type dns_resolver registered [ 3.216241] registered taskstats version 1 [ 3.219332] Loading compiled-in X.509 certificates [ 3.230683] Loaded X.509 cert 'Build time autogenerated kernel key: 9be991da9d8ded22224dde3fe9c6150c611f6c26' [ 3.235093] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 3.245299] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 3.247002] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 3.255858] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 3.263951] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 3.379518] tegra194-pcie 14160000.pcie: Link up [ 3.382689] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 3.382863] pci_bus 0004:00: root bus resource [bus 00-ff] [ 3.383000] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 3.383285] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 3.383591] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 3.384095] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 3.384535] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 3.397476] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 3.398017] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.398547] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 3.400333] pci 0004:01:00.0: supports D1 D2 [ 3.400516] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.412573] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 3.412930] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 3.413208] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 3.413621] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.413971] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 3.414145] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 3.414356] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 3.421746] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 3.429963] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 3.440326] pcieport 0004:00:00.0: Adding to iommu group 6 [ 3.444842] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 3.450659] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 3.457586] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 3.466803] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 3.468316] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 3.476643] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 3.484908] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 4.600383] tegra194-pcie 141a0000.pcie: Phy link never came up [ 4.601044] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 4.601250] pci_bus 0005:00: root bus resource [bus 00-ff] [ 4.601514] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 4.601763] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 4.602108] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 4.602444] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 4.602860] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 4.621032] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 4.621339] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 4.623080] pcieport 0005:00:00.0: Adding to iommu group 7 [ 4.624598] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 4.625840] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 4.627194] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 4.628476] pci 0005:00:00.0: Removing from iommu group 7 [ 4.628780] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 4.662263] host1x 13e10000.host1x: Adding to iommu group 8 [ 4.686345] host1x 13e10000.host1x: initialized [ 4.688039] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 4.688975] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 4.690073] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 4.690875] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 4.692175] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 4.692821] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 4.693948] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 4.694755] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 4.696064] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 4.700666] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 4.710883] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 4.717690] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 4.727903] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 4.734661] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 4.744747] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 4.751923] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 4.761402] falcon 15340000.vic: Adding to iommu group 17 [ 4.776424] falcon 15340000.vic: initialized [ 4.777336] falcon 15380000.nvjpg: Adding to iommu group 17 [ 4.783956] falcon 15380000.nvjpg: initialized [ 4.784550] falcon 154c0000.nvenc: Adding to iommu group 17 [ 4.795170] falcon 154c0000.nvenc: initialized [ 4.795988] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 4.803584] falcon 15a80000.nvenc1: initialized [ 4.804113] nvdec 15480000.nvdec: Adding to iommu group 17 [ 4.816934] nvdec 15480000.nvdec: initialized [ 4.817521] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 4.827155] nvdec 15140000.nvdec1: initialized [ 4.827698] tsec 15500000.tsec: Adding to iommu group 18 [ 4.834274] tsec 15500000.tsec: initialized [ 4.834894] tsec 15100000.tsecb: Adding to iommu group 19 [ 4.842173] tsec 15100000.tsecb: initialized [ 4.845888] gic 2a41000.agic-controller: GIC IRQ controller registered [ 4.871842] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 4.883504] gpio-374 (wifi-enable): hogged as output/high [ 4.883880] gpio-431 (camera-control-output-low): hogged as output/low [ 4.884133] gpio-432 (camera-control-output-low): hogged as output/low [ 4.885941] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 4.888173] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 4.888757] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 4.892951] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 4.898099] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 4.903985] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 4.909371] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 4.917577] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 4.925125] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 4.937047] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 4.941972] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 4.947552] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 4.956284] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 4.965760] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 4.973152] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 4.980527] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 4.986647] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 4.996654] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.002486] pva 16000000.pva0: Adding to iommu group 22 [ 5.029320] pva 16000000.pva0: initialized [ 5.033580] pva 16800000.pva1: Adding to iommu group 23 [ 5.044852] pva 16800000.pva1: initialized [ 5.048923] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.061714] nvdla 15880000.nvdla0: initialized [ 5.062892] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.071681] nvdla 158c0000.nvdla1: initialized [ 5.074409] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.074772] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.075263] tegradc 15210000.display: Adding to iommu group 26 [ 5.075579] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.075989] tegradc 15200000.display: Adding to iommu group 26 [ 5.076038] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 5.078605] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 5.084232] tegra_cec 3960000.tegra_cec: probed [ 5.089980] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 5.090547] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.096860] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 5.100791] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.101011] tegradccommon 15200000.display-hub: dma mapping done [ 5.108122] kfuse 3830000.kfuse: initialized [ 5.126038] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 5.131625] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 5.138945] serial-tegra 3100000.serial: Adding to iommu group 2 [ 5.145124] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 5.154478] serial-tegra 3110000.serial: Adding to iommu group 2 [ 5.159228] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 5.168467] serial-tegra 3140000.serial: Adding to iommu group 2 [ 5.174439] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 5.195486] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 5.195897] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.197612] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 5.205705] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 5.214298] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 5.221043] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 5.228415] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.235578] usb usb1: Product: xHCI Host Controller [ 5.240811] usb usb1: Manufacturer: Linux 5.10.104 xhci-hcd [ 5.246585] usb usb1: SerialNumber: 3610000.xhci [ 5.252434] hub 1-0:1.0: USB hub found [ 5.255121] hub 1-0:1.0: 4 ports detected [ 5.259807] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.264296] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 5.272148] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 5.279873] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 5.287508] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.294729] usb usb2: Product: xHCI Host Controller [ 5.299957] usb usb2: Manufacturer: Linux 5.10.104 xhci-hcd [ 5.305642] usb usb2: SerialNumber: 3610000.xhci [ 5.311132] hub 2-0:1.0: USB hub found [ 5.314121] hub 2-0:1.0: 4 ports detected [ 5.359659] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 5.366266] i2c i2c-2: Added multiplexed i2c bus 9 [ 5.367654] i2c i2c-2: Added multiplexed i2c bus 10 [ 5.367920] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 5.381312] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 5.382351] tegra194-cpufreq ccplex: probed with BWMGR [ 5.383514] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 5.383967] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 5.386122] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 5.393801] mmc0: CQHCI version 5.10 [ 5.394040] tegra194-vi5 15c10000.vi: initialized [ 5.395843] tegradc 15200000.display: disp0 connected to head0->sor1 [ 5.396161] generic_infoframe_type: 0x87 [ 5.396348] tegradc 15200000.display: DT parsed successfully [ 5.397396] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 5.399505] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 5.405700] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 5.421571] nvethernet 2490000.ethernet: failed to read MDIO address [ 5.428112] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 5.434738] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 5.441615] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 5.442790] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 5.455412] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 5.455962] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 5.460852] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 5.462786] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 5.462795] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 5.470918] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 5.479774] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:07:6a:3b [ 5.485843] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 5.500087] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 5.515280] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 5.520115] nvethernet 2490000.ethernet: Macsec not supported [ 5.527283] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 5.534172] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 5.540760] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 5.546966] mmc0: Command Queue Engine enabled [ 5.546971] mmc0: periodic cache flush enabled [ 5.546981] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 5.547456] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 5.547599] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 5.547708] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 5.547844] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 5.549765] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 5.551751] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 5.583581] tegradc 15200000.display: probed [ 5.587620] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 5.620199] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 5.628512] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 5.634752] tegra-se-nvhost 15810000.se: initialized [ 5.642957] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 5.644739] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 5.644938] Console: switching to colour frame buffer device 480x135 [ 5.650487] tegra-se-nvhost 15820000.se: initialized [ 5.656879] tegradc 15200000.display: fb registered [ 5.663216] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 5.666650] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 5.673611] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 5.679976] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 5.691104] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 5.697065] tegra-se-nvhost 15830000.se: initialized [ 5.702783] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 5.708507] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 5.714834] tegra-se-nvhost 15840000.se: initialized [ 5.720593] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 5.726576] tegra_actmon d230000.actmon: in actmon_register()... [ 5.731187] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 5.736992] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 5.745238] hvc_sysfs: hypervisor is not present [ 5.756427] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 5.757467] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.761800] tegradc 15200000.display: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 5.764585] usb 1-2: Product: 4-Port USB 2.0 Hub [ 5.777057] ALSA device list: [ 5.778046] usb 1-2: Manufacturer: Generic [ 5.779057] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 5.781284] No soundcards found. [ 5.783061] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 5.783066] Extcon AUX1(HDMI) enable [ 5.783319] tegradc 15210000.display: disp1 connected to head1->sor [ 5.783419] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 5.783465] tegradc 15210000.display: DT parsed successfully [ 5.783499] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 5.783615] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 5.783620] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 5.787373] hub 1-2:1.0: USB hub found [ 5.789913] tegradc 15210000.display: probed [ 5.853938] tegradc 15210000.display: fb registered [ 5.855091] hub 1-2:1.0: 4 ports detected [ 5.857345] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 5.857350] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 5.857356] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 5.859683] Freeing unused kernel memory: 3968K [ 5.888239] tegradc 15210000.display: blank - powerdown [ 5.893377] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 5.900815] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 5.907490] Run /init as init process [ 5.909032] Extcon DP: HPD disabled [ 5.915859] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 5.915869] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 5.915873] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâpll_d2 has no dyn ramp WARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 5.935774] tegradc 15200000.display: blank - powerdown [ 5.952663] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 5.952669] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.952672] usb 2-3: Product: 4-Port USB 3.0 Hub [ 5.952676] usb 2-3: Manufacturer: Generic [ 5.963413] hub 2-3:1.0: USB hub found [ 5.965245] hub 2-3:1.0: 4 ports detected [ 5.977276] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 5.977281] Extcon AUX1(HDMI) disable [ 6.000449] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.001496] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.026057] tegradc 15200000.display: unblank [ 6.027304] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.027503] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.037040] tegradc 15200000.display: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 6.039192] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.043188] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.043191] Extcon AUX1(HDMI) enable [ 6.055943] tegradc 15200000.display: sync windows ret = 246 [ 6.071444] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 6.080140] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 6.087277] Extcon HDMI: HPD enabled [ 6.090950] tegradc 15200000.display: hdmi: plugged [ 6.091414] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 6.130902] Root device found: initrd [ 6.132517] Mount initrd as rootfs and enter recovery mode [ 6.155977] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 6.156210] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. Finding OTA work dir on external storage devices Checking whether device /dev/mmcblk?p1 exist Looking for OTA work directory on the device(s): /dev/mmcblk0p1 Checking whether device /dev/sd?1 exist Device /dev/sd?1 does not exist Checking whether device /dev/nvme?n1p1 exist Device /dev/nvme?n1p1 does not exist Finding OTA work dir on internal storage device [ 6.232623] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 6.232824] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.232969] usb 1-3: Product: Bluetooth Radio [ 6.233062] usb 1-3: Manufacturer: Realtek [ 6.233144] usb 1-3: SerialNumber: 00e04c000001 [ 6.236806] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) OTA work directory /mnt/ota_work is not found on /dev/mmcblk0p1 OTA work directory is not found on internal and external storage devices bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell bash-5.0# [ 6.563377] usb 1-2.1: new high-speed USB device number 4 using tegra-xusb [ 6.664162] usb 1-2.1: New USB device found, idVendor=14cd, idProduct=8601, bcdDevice= 0.00 [ 6.664364] usb 1-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 6.664518] usb 1-2.1: Product: USB 2.0 Hub [ 6.664632] usb 1-2.1: Manufacturer: USB Device [ 6.666148] hub 1-2.1:1.0: USB hub found [ 6.666356] hub 1-2.1:1.0: 4 ports detected [ 6.951379] usb 1-2.1.2: new low-speed USB device number 5 using tegra-xusb [ 7.057574] usb 1-2.1.2: New USB device found, idVendor=04b3, idProduct=3025, bcdDevice= 1.09 [ 7.057762] usb 1-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.057924] usb 1-2.1.2: Product: USB NetVista Full Width Keyboard. [ 7.058055] usb 1-2.1.2: Manufacturer: LITE-ON Technology [ 7.064630] input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/0003:04B3:3025.0001/input/input1 [ 7.123629] hid-generic 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-3610000.xhci-2.1.2/input0 [ 7.203371] usb 1-2.1.3: new low-speed USB device number 6 using tegra-xusb [ 7.307833] usb 1-2.1.3: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14 [ 7.308021] usb 1-2.1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 7.308220] usb 1-2.1.3: Product: USB Optical Mouse [ 7.315126] input: USB Optical Mouse as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1.3/1-2.1.3:1.0/0003:1BCF:0005.0002/input/input2 [ 7.315745] hid-generic 0003:1BCF:0005.0002: input,hidraw1: USB HID v1.10 Mouse [USB Optical Mouse] on usb-3610000.xhci-2.1.3/input0 [ 35.947388] vdd-1v8-sd: disabling [ 35.947509] vdd-3v3-cvb: disabling [ 35.947596] vdd-1v8-cvb: disabling [ 35.947670] vdd-epb-1v0: disabling [ 35.947764] vdd-fan: disabling [ 35.947831] vdd_sys_en: disabling [ 47.639199] random: crng init done ^@