ubuntu@tegra-ubuntu:~$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.96-tegra (ubuntu@P-001) (gcc version 4.8.5 (GCC) ) #1 SMP PREEMPT Mon Oct 22 14:30:51 JST 2018 [ 0.000000] CPU: Cortex A57 Processor [411fd071] revision 1 [ 0.000000] alternative: enabling workaround for ARM erratum 832075 [ 0.000000] Machine: jetson_tx1 [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Reserved memory: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] Tegra reserved memory: LP0: ff2bf000 - ff2bffff Bootloader framebuffer: 00000000 - 00000000 Bootloader framebuffer2: 00000000 - 00000000 Framebuffer: 00000000 - 00000000 2nd Framebuffer: 00000000 - 00000000 Carveout: 00000000 - 00000000 Vpr: 00000000 - 00000000 Tsec: 00000000 - 00000000 Bootloader Debug Data: 00000000 - 00000000 [ 0.000000] Nvdumper: ff23f000 - ff23ffff [ 0.000000] cma: CMA: reserved 16 MiB at fdc00000 [ 0.000000] On node 0 totalpages: 1043968 [ 0.000000] DMA32 zone: 7168 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 519680 pages, LIFO batch:31 [ 0.000000] Normal zone: 7168 pages used for memmap [ 0.000000] Normal zone: 524288 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] DTS File Name: /home/ubuntu/jetpak/20-SPI_Flash/04-MX5/24.2.1/src/sources/kernel/arch/arm64/boot/dts/tegra210--.dts [ 0.000000] DTB Build time: Oct 22 2018 14:31:38 [ 0.000000] Tegra21: Speedo/IDDQ fuse revision 4 [ 0.000000] Tegra21: CPU Speedo ID 7, Soc Speedo ID 0, Gpu Speedo ID 2 [ 0.000000] Tegra21: CPU Process ID 0, Soc Process ID 0, Gpu Process ID 0 [ 0.000000] Tegra21: CPU Speedo value 2032, Soc Speedo value 1918, Gpu Speedo value 2041 [ 0.000000] Tegra21: CPU IDDQ 2376, Soc IDDQ 2632, Gpu IDDQ 3195 [ 0.000000] Tegra Revision: A02 SKU: 0x17 CPU Process: 0 Core Process: 0 Bootrom patch v0x3f [ 0.000000] tegra: PLLP fixed rate: 408000000 [ 0.000000] pll_u: boot with h/w control already set [ 0.000000] pll_x boot misc1 0x0 : expected 0x20 [ 0.000000] (comparison mask = 0xffffff) [ 0.000000] pll_c4 rates match 204000000 max sdmmc: vco=998400000 out0=998400000 out3=998400000 [ 0.000000] Lowering vic03 maximum rate from 1000000000 to 627200000 [ 0.000000] Lowering nvjpg maximum rate from 1000000000 to 627200000 [ 0.000000] Lowering se maximum rate from 1000000000 to 627200000 [ 0.000000] Lowering tsecb maximum rate from 1000000000 to 627200000 [ 0.000000] Lowering msenc maximum rate from 1000000000 to 716800000 [ 0.000000] Lowering nvdec maximum rate from 1000000000 to 716800000 [ 0.000000] Lowering vi maximum rate from 1000000000 to 793600000 [ 0.000000] Lowering isp maximum rate from 1000000000 to 793600000 [ 0.000000] Lowering adsp_bus maximum rate from 1200000000 to 844800000 [ 0.000000] Lowering sbus maximum rate from 600000000 to 408000000 [ 0.000000] Lowering host1x maximum rate from 600000000 to 408000000 [ 0.000000] Lowering pll_c maximum rate from 1200000000 to 1130000000 [ 0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1130000000 [ 0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1130000000 [ 0.000000] Lowering pll_d2 maximum rate from 1500000000 to 1130000000 [ 0.000000] Lowering pll_dp maximum rate from 1500000000 to 1130000000 [ 0.000000] Lowering sor0 maximum rate from 600000000 to 540000000 [ 0.000000] Lowering sor1 maximum rate from 600000000 to 594000000 [ 0.000000] Lowering dmic1 maximum rate from 12288000 to 12190000 [ 0.000000] Lowering dmic2 maximum rate from 12288000 to 12190000 [ 0.000000] Lowering dmic3 maximum rate from 12288000 to 12190000 [ 0.000000] Lowering hda maximum rate from 102000000 to 51000000 [ 0.000000] Lowering sdmmc2 maximum rate from 266000000 to 204000000 [ 0.000000] Lowering qspi maximum rate from 163200000 to 116600000 [ 0.000000] Lowering gbus maximum rate from 1300000000 to 998400000 [ 0.000000] Lowering cpu_g maximum rate from 3000000000 to 1734000000 [ 0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1132800000 [ 0.000000] tegra dvfs: vdd_cpu: nominal 1226mV, offset 708000uV, step 19200uV, scaling enabled [ 0.000000] tegra dvfs: vdd_core: nominal 1125mV, offset 0uV, step 12500uV, scaling enabled [ 0.000000] tegra dvfs: vdd_gpu: nominal 1110mV, offset 710000uV, step 10000uV, scaling enabled [ 0.000000] Tegra reset control registration success [ 0.000000] tegra_powergate_init: DONE [ 0.000000] PERCPU: Embedded 13 pages/cpu @ffffffc01fed0000 s20800 r8192 d24256 u53248 [ 0.000000] pcpu-alloc: s20800 r8192 d24256 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029632 [ 0.000000] Kernel command line: fbcon=map:0 console=tty0 console=ttyS0,115200n8 androidboot.modem=none androidboot.serialno=P2180A00P00940c003fd androidboot.security=non-secure tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff2bf000 nvdumper_reserved=0xff23f000 core_edp_mv=1125 core_edp_ma=4000 gpt android.kerneltype=normal androidboot.touch_vendor_id=0 androidboot.touch_panel_id=63 androidboot.touch_feature=0 androidboot.bootreason=pmc:software_reset,pmic:0x0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 2030MB 2048MB = 4078MB total [ 0.000000] Memory: 4071492k/4071492k available, 104380k reserved [ 0.000000] Virtual kernel memory layout: vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB) vmemmap : 0xffffffbc01c00000 - 0xffffffbc05400000 ( 56 MB) modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) memory : 0xffffffc000000000 - 0xffffffc100000000 ( 4096 MB) .init : 0xffffffc000d8e000 - 0xffffffc000df0140 ( 393 kB) .text : 0xffffffc000080000 - 0xffffffc000d8d424 ( 13366 kB) .data : 0xffffffc000dfe000 - 0xffffffc000f4b5c0 ( 1334 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:704 nr_irqs:704 0 [ 0.000000] the number of interrupt controllers found is 6 [ 0.000000] Architected local timer running at 19.20MHz (phys). [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.023651] Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=192000 [ 0.032462] pid_max: default: 32768 minimum: 301 [ 0.037151] Security Framework initialized [ 0.041187] Mount-cache hash table entries: 256 [ 0.101203] Initializing cgroup subsys debug [ 0.103486] Initializing cgroup subsys memory [ 0.107842] Initializing cgroup subsys devices [ 0.112251] Initializing cgroup subsys freezer [ 0.116654] Initializing cgroup subsys net_cls [ 0.121081] Initializing cgroup subsys blkio [ 0.125320] Initializing cgroup subsys perf_event [ 0.130199] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available [ 0.170262] ftrace: Allocated trace_printk buffers [ 0.230814] Brought up 4 CPUs [ 0.231790] SMP: Total of 4 processors activated. [ 0.236484] alternatives: patching kernel code [ 0.242910] devtmpfs: initialized [ 0.251215] pinctrl core: initialized pinctrl subsystem [ 0.254673] regulator-dummy: ; Rail ON [ 0.258485] Initializing plugin-manager [ 0.262779] node /plugin-manager/fragement@0 match with board >=2180-1000-300 [ 0.269641] NET: Registered protocol family 16 [ 0.275238] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.281022] console [pstore-1] enabled [ 0.284177] ramoops: attached 0x200000@0xff03f000, ecc: 0/0 [ 0.289972] I2C first dynamic bus number based on alias = 7 [ 0.295319] cpuidle: using governor ladder [ 0.299337] cpuidle: using governor menu [ 0.304066] PMC: Setting PMIC interrupt active-low [ 0.308690] tegra-pmc device create success [ 0.312232] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.319361] Clear bootloader IO dpd settings [ 0.323616] PMC: configuring io pad defaults [ 0.328028] PMC: IO pad audio voltage is 1800000 [ 0.332555] PMC: IO pad cam voltage is 1800000 [ 0.336965] PMC: IO pad dbg voltage is 1800000 [ 0.341394] PMC: IO pad dmic voltage is 1800000 [ 0.345892] PMC: IO pad pex-ctrl voltage is 1800000 [ 0.350753] PMC: IO pad spi voltage is 1800000 [ 0.355165] PMC: IO pad uart voltage is 1800000 [ 0.359671] PMC: IO pad bb voltage is 1800000 [ 0.364013] PMC: IO pad audio-hv voltage is 1800000 [ 0.368859] PMC: IO pad spi-hv voltage is 1800000 [ 0.373547] PMC: IO pad gpio voltage is 1800000 [ 0.378045] PMC: IO pad sdmmc3 voltage is 1800000 [ 0.382642] PMC: IO pad pex-bias power is disable [ 0.387312] PMC: IO pad pex-clk1 power is disable [ 0.392000] PMC: IO pad pex-clk2 power is disable [ 0.396663] T210 pmc padctrl driver initialized [ 0.401216] T210 pmc config for bootrom command passed [ 0.407004] INFO: pinmux CLAMP_INPUTS_WHEN_TRISTATED: disabled [ 0.413852] clk_init_from_dt_table: clocks are set from t210-clk-init-table:clkinit-0 [ 0.421952] platform tegra-carveouts.23: SMMU isn't ready yet [ 0.426205] platform tegra-carveouts.23: domain=ffffffc0fe1c1d58 allocates as[0]=ffffffc0fe2040a8 [ 0.434593] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.441133] bpmp: connect returned 0 [ 0.444519] mapped MMIO address: 0xffffff800001e000 -> 0x70019000 [ 0.450218] mapped MMIO address: 0xffffff8000056000 -> 0x7001c000 [ 0.456265] mapped MMIO address: 0xffffff800007c000 -> 0x7001d000 [ 0.463182] Wake16 for irq=34 [ 0.470382] tegra210-pinctrl 700008d4.pinmux: lookup the user state drive not found [ 0.476047] tegra210-pinctrl 700008d4.pinmux: lookup the user state unused not found [ 0.483767] tegra210-pinctrl 700008d4.pinmux: Probed Tegra pinctrl driver [ 0.490880] GPIO chip tegra-gpio: created GPIO range 0->245 ==> 700008d4.pinmux PIN 0->245 [ 0.498790] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name default [ 0.505882] tegra-gpio 6000d000.gpio: Initialising GPIO state 1: name camera_control [ 0.513604] tegra-gpio 6000d000.gpio: Initialising GPIO state 2: name camera-control [ 0.521302] tegra-gpio 6000d000.gpio: Initialising GPIO state 3: name default [ 0.528433] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio [ 0.537797] Wake44 for irq=81 [ 0.538795] Wake40 for irq=53 [ 0.541715] Wake41 for irq=53 [ 0.544661] Wake42 for irq=53 [ 0.547608] Wake43 for irq=53 [ 0.550935] platform 70006040.serial: domain=ffffffc0fe248f58 allocates as[0]=ffffffc0fe204110 [ 0.560841] platform tegradc.1: domain=ffffffc0fe248ad8 allocates as[0]=ffffffc0fe204178 [ 0.568678] platform gpu.0: domain=ffffffc0fe2488d8 allocates as[0]=ffffffc0fe2041e0 [ 0.574961] platform gpu.0: domain=ffffffc0fe2488d8 allocates as[1]=ffffffc0fe204248 [ 0.582674] platform gpu.0: domain=ffffffc0fe2488d8 allocates as[2]=ffffffc0fe2042b0 [ 0.590386] platform gpu.0: domain=ffffffc0fe2488d8 allocates as[3]=ffffffc0fe204318 [ 0.599212] platform 702ef000.adsp: domain=ffffffc0fe2486d8 allocates as[0]=ffffffc0fe204380 [ 0.606753] platform 1003000.pcie-controller: domain=ffffffc0fe248558 allocates as[0]=ffffffc0fe2043e8 [ 0.616829] platform sdhci-tegra.3: domain=ffffffc0fe2481d8 allocates as[0]=ffffffc0fe204450 [ 0.624481] platform sdhci-tegra.0: domain=ffffffc0fe2a1ed8 allocates as[0]=ffffffc0fe2044b8 [ 0.632749] Wake39 for irq=52 [ 0.640755] gpio wake52 for gpio=61 [ 0.642408] gpio wake8 for gpio=58 [ 0.645659] gpio wake8 for gpio=58 [ 0.649771] irq: no irq domain found for /soctherm@0x700E2000 ! [ 0.655048] irq: no irq domain found for /soctherm@0x700E2000 ! [ 0.660956] board_info: id:sku:fab:major:minor = 0x0884:0x03e8:0x00:0x00:0x00 [ 0.667919] PMC dt information non-NULL tegra_init_suspend [ 0.678714] Loading EMC tables... [ 0.680137] tegra: Using EMC sequence '21021' for Rev. 7 tables [ 0.685941] tegra: emc: Derated table is valid. [ 0.690453] Lowering emc maximum rate from 1800000000 to 1600000000 [ 0.696686] tegra: validated EMC DFS table [ 0.706429] swapper/0 isomgr_init(): iso emc max clk=1600000KHz [ 0.710383] swapper/0 isomgr_init(): max_iso_bw=11520000KB [ 0.715997] vdso: 2 pages (1 code, 1 data) at base ffffffc000e06000 [ 0.722081] vdso32: 2 pages (1 code, 1 data) at base ffffffc000e05000 [ 0.728494] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.735373] nvdumper: last reboot was unknown [ 0.739567] nvdumper: set_dirty_state 0x2badface [ 0.744481] Tegra restart notifier registered. [ 0.753652] bio: create slab at 0 [ 0.756804] of_get_named_gpio_flags: can't parse gpios property [ 0.756876] vdd-ac-bat: 5000 mV ; Rail ON [ 0.759742] of_get_named_gpio_flags: can't parse gpios property [ 0.759803] vdd-cpu-fixed: 1000 mV ; Rail ON [ 0.764344] vgaarb: loaded [ 0.766875] SCSI subsystem initialized [ 0.770364] libata version 3.00 loaded. [ 0.770483] usbcore: registered new interface driver usbfs [ 0.775799] usbcore: registered new interface driver hub [ 0.781143] usbcore: registered new device driver usb [ 0.786421] of_get_named_gpio_flags: can't parse gpios property [ 0.786428] of_get_named_gpio_flags: can't parse gpios property [ 0.786649] gpio wake33 for gpio=188 [ 0.790052] of_get_named_gpio_flags: can't parse gpios property [ 0.790060] of_get_named_gpio_flags: can't parse gpios property [ 0.790609] regulator_get() failed for (1-0074,vcc), -19 [ 0.794933] pca953x 1-0074: no regulator found for vcc. Assuming vcc is always powered [ 0.803302] gpiochip_find_base: found new base at 1008 [ 0.803359] gpiochip_add: registered GPIOs 1008 to 1023 on device: tca9539 [ 0.809725] of_get_named_gpio_flags: can't parse gpios property [ 0.809731] of_get_named_gpio_flags: can't parse gpios property [ 0.809886] i2c i2c-3: of_i2c: modalias failure on /i2c@7000c700/prod-settings [ 0.816951] of_get_named_gpio_flags exited with status 195 [ 0.816969] of_get_named_gpio_flags exited with status 196 [ 0.817697] max77620 4-003c: CID0: 0xf9 [ 0.820767] max77620 4-003c: CID1: 0x06 [ 0.824562] max77620 4-003c: CID2: 0x05 [ 0.828374] max77620 4-003c: CID3: 0x59 [ 0.832201] max77620 4-003c: CID4: 0x3c [ 0.836001] max77620 4-003c: CID5: 0x80 [ 0.839815] max77620 4-003c: MAX77620 PMIC OTP Version is 0x3C [ 0.846944] max77620-pmic max77620-pmic: Consumer c2 does not have device name [ 0.853732] vdd_core: 600 <--> 1400 mV at 1000 mV with ramp delay 27500 uV/us ; Rail ON [ 0.861496] vddio-ddr: at 1125 mV with ramp delay 27500 uV/us ; Rail ON [ 0.867803] vdd-pre-reg: 1350 mV with ramp delay 27500 uV/us ; Rail ON [ 0.874818] vdd-1v8: 1800 mV with ramp delay 27500 uV/us ; Rail ON [ 0.880621] avdd-sys: 1200 mV with ramp delay 100000 uV/us ; Rail ON [ 0.886333] avdd-sys: supplied by vdd-pre-reg [ 0.891190] vdd-pex: 1050 mV with ramp delay 100000 uV/us ; Rail ON [ 0.896883] vdd-pex: supplied by vdd-pre-reg [ 0.901466] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV with ramp delay 100000 uV/us ; Rail ON [ 0.910014] vdd-cam-hv: 2800 mV with ramp delay 100000 uV/us ; Rail OFF [ 0.916733] vdd-rtc: 850 mV with ramp delay 100000 uV/us ; Rail ON [ 0.922764] avdd-ts-hv: 3300 mV with ramp delay 100000 uV/us ; Rail OFF [ 0.930010] vdd-ts: 1800 mV with ramp delay 100000 uV/us ; Rail OFF [ 0.935835] vdd-gen-pll-edp: 1050 mV with ramp delay 100000 uV/us ; Rail ON [ 0.942141] vdd-gen-pll-edp: supplied by vdd-pre-reg [ 0.947643] vdd-hdmi-dp: 1050 mV with ramp delay 100000 uV/us ; Rail ON [ 0.953662] vdd-hdmi-dp: supplied by vdd-pre-reg [ 0.958361] gpiochip_find_base: found new base at 1000 [ 0.958613] max77620-gpio max77620-gpio.0: Initialising GPIO state 1: name gpio_default [ 0.966254] gpiochip_add: registered GPIOs 1000 to 1007 on device: max77620-gpio [ 0.974578] max77620-gpio max77620-gpio.0: max77620 gpio successfully initialized [ 0.983910] max77620 4-003c: max77620 probe successfully [ 0.987490] media: Linux media interface: v0.10 [ 0.991769] Linux video capture interface: v2.00 [ 0.996699] pps_core: LinuxPPS API ver. 1 registered [ 1.001279] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.010394] PTP clock support registered [ 1.014560] Tegra WDT enabled on probe. Timeout = 120 seconds. [ 1.020255] tegra_wdt 60005100.watchdog: tegra_wdt_probe done [ 1.027448] of_get_named_gpio_flags exited with status 1003 [ 1.028246] vdd-3v3: 3300 mV ; Rail ON [ 1.030156] of_get_named_gpio_flags exited with status 1007 [ 1.031183] max77620-gpio7: 1050 mV ; Rail ON [ 1.034370] max77620-gpio7: supplied by vdd-gen-pll-edp [ 1.039654] of_get_named_gpio_flags exited with status 169 [ 1.039743] lcd-bl-en: 1800 mV ; Rail ON [ 1.043549] of_get_named_gpio_flags exited with status 203 [ 1.043625] en-vdd-sd: 3300 mV ; Rail OFF [ 1.047464] en-vdd-sd: supplied by vdd-3v3 [ 1.051640] of_get_named_gpio_flags exited with status 1001 [ 1.058195] vdd-sys-boost: 5000 mV ; Rail ON [ 1.060564] of_get_named_gpio_flags: can't parse gpios property [ 1.060628] aux-3v3: 3300 mV ; Rail ON [ 1.064275] of_get_named_gpio_flags: can't parse gpios property [ 1.064341] snsr_pm: 3300 mV ; Rail ON [ 1.068019] of_get_named_gpio_flags exited with status 67 [ 1.068564] vdd-disp-3v0: 3000 mV ; Rail ON [ 1.072192] of_get_named_gpio_flags exited with status 228 [ 1.072267] usb-vbus1: 5000 mV ; Rail OFF [ 1.076107] usb-vbus1: supplied by vdd-3v3 [ 1.080265] of_get_named_gpio_flags exited with status 28 [ 1.080336] usb-vbus3: 5000 mV ; Rail OFF [ 1.084162] usb-vbus3: supplied by vdd-3v3 [ 1.088313] of_get_named_gpio_flags exited with status 57 [ 1.088388] rtl-5v0: ; Rail OFF [ 1.091429] of_get_named_gpio_flags exited with status 229 [ 1.091507] en-usb-vbus2: ; Rail OFF [ 1.094963] of_get_named_gpio_flags: can't parse gpios property [ 1.095025] en-vdd-vcm-2v8: ; Rail ON [ 1.098551] en-vdd-vcm-2v8: supplied by vdd-3v3 [ 1.103462] of_get_named_gpio_flags: can't parse gpios property [ 1.103469] of_get_named_gpio_flags: can't parse gpios property [ 1.103475] of_get_named_gpio_flags: can't parse gpios property [ 1.103516] regulator-pwm 0.pwm-regulator: PWM request deferred [ 1.108925] platform 0.pwm-regulator: Driver regulator-pwm requests probe deferral [ 1.116542] of_get_named_gpio_flags exited with status 1006 [ 1.116549] of_get_named_gpio_flags: can't parse gpios property [ 1.116554] of_get_named_gpio_flags: can't parse gpios property [ 1.116956] vdd_gpu: applied init 1000000uV constraint [ 1.121586] vdd_gpu: 710 <--> 1320 mV at 1000 mV ; Rail OFF [ 1.127465] of_get_named_gpio_flags: can't parse gpios property [ 1.127531] vdd_cpu: applied init 1000000uV constraint [ 1.132247] vdd_cpu: 708 <--> 1322 mV at 1000 mV normal ; Rail ON [ 1.138701] of_get_named_gpio_flags exited with status 200 [ 1.138738] of_get_named_gpio_flags exited with status 1000 [ 1.138850] gpio wake34 for gpio=200 [ 1.143044] extcon-gpio-states 1.extcon: Cable state 0 [ 1.148012] Switching to clocksource arch_sys_counter [ 1.165548] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.170245] tegra-carveouts tegra-carveouts.23: iram :dma coherent mem declare 0x0000000040001000,258048 [ 1.179565] tegra-carveouts tegra-carveouts.23: assigned reserved memory node iram-carveout [ 1.187870] nvmap_page_pool_init: Total RAM pages: 1021969 [ 1.193317] nvmap_page_pool_init: nvmap page pool size: 127746 pages (499 MB) [ 1.200505] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.207406] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 1.214260] nvmap:inner cache maint threshold=2097152 [ 1.225526] Wake39 for irq=52 [ 1.226686] Could not add tegra-otg to power domain using device tree [ 1.233151] tegra-otg tegra-otg: otg transceiver registered [ 1.238895] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 1.247749] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 1.255594] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 1.263885] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 1.272272] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.281242] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 1.289298] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type Tboard_tegra [ 1.298441] tegra21_plle_clk_enable: pll_e is already enabled [ 1.303576] t210_sata_uphy_pll_init: init sata uphy pll [ 1.308751] t210_sata_uphy_pll_init SATA uses SATA Lane [ 1.314267] tegra_xusb_padctl_phy_enable: init pex uphy pll [ 1.320687] tegra210-pmc-iopower pmc-iopower.28: Rail iopower-sys is having fixed voltage 1800000 [ 1.328409] tegra210-pmc-iopower pmc-iopower.28: Rail iopower-uart is having fixed voltage 1800000 [ 1.337331] tegra210-pmc-iopower pmc-iopower.28: Rail iopower-audio is having fixed voltage 1800000 [ 1.346342] tegra210-pmc-iopower pmc-iopower.28: Rail iopower-cam is having fixed voltage 1800000 [ 1.355183] tegra210-pmc-iopower pmc-iopower.28: Rail iopower-pex-ctrl is having fixed voltage 1800000 [ 1.364465] tegra210-pmc-iopower pmc-iopower.28: Rail iopower-sdmmc1 is having voltages: 1800000:3300000 [ 1.373905] tegra210-pmc-iopower pmc-iopower.28: Rail iopower-sdmmc3 is having fixed voltage 1800000 [ 1.383005] tegra210-pmc-iopower pmc-iopower.28: Rail iopower-sdmmc4 is having fixed voltage 1800000 [ 1.392103] tegra210-pmc-iopower pmc-iopower.28: Rail iopower-audio-hv is having fixed voltage 1800000 [ 1.401371] tegra210-pmc-iopower pmc-iopower.28: Rail iopower-debug is having fixed voltage 1800000 [ 1.410386] tegra210-pmc-iopower pmc-iopower.28: Rail iopower-dmic is having fixed voltage 1800000 [ 1.419317] tegra210-pmc-iopower pmc-iopower.28: Rail iopower-gpio is having fixed voltage 1800000 [ 1.428245] tegra210-pmc-iopower pmc-iopower.28: Rail iopower-spi is having fixed voltage 1800000 [ 1.437083] tegra210-pmc-iopower pmc-iopower.28: Rail iopower-spi-hv is having fixed voltage 1800000 [ 1.446184] tegra210-pmc-iopower pmc-iopower.28: Rail iopower-sdmmc2 is having fixed voltage 1800000 [ 1.455285] tegra210-pmc-iopower pmc-iopower.28: Rail iopower-dp is having fixed voltage 1800000 [ 1.463986] tegra210-pmc-iopower pmc-iopower.28: NO_IO_POWER setting 0x0 [ 1.470827] NET: Registered protocol family 2 [ 1.475590] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 1.482352] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 1.488941] TCP: Hash tables configured (established 32768 bind 32768) [ 1.495327] TCP: reno registered [ 1.498461] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.504480] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.511093] NET: Registered protocol family 1 [ 1.515488] RPC: Registered named UNIX socket transport module. [ 1.521079] RPC: Registered udp transport module. [ 1.525772] RPC: Registered tcp transport module. [ 1.530436] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.536863] PCI: CLS 0 bytes, default 64 [ 1.537152] tegra-fuse tegra-fuse: Fuse driver initialized succesfully [ 1.543667] Trying to unpack rootfs image as initramfs... [ 1.784521] Freeing initrd memory: 6740K (ffffffc003100000 - ffffffc003795000) [ 1.793422] host1x host1x: initialized [ 1.798427] NTFS driver 2.1.30 [Flags: R/O]. [ 1.800864] fuse init (API version 7.22) [ 1.804759] msgmni has been set to 7997 [ 1.809472] io scheduler noop registered (default) [ 1.813317] Tegra cpuquiet initialized: disabled [ 1.818133] of_get_named_gpio_flags: can't parse gpios property [ 1.818178] of_get_named_gpio_flags exited with status 2 [ 1.818186] of_get_named_gpio_flags: can't parse gpios property [ 1.819183] of_get_named_gpio_flags: can't parse gpios property [ 1.819363] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails [ 1.825400] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes and lane map as 0x4 [ 1.856602] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00 [ 1.861831] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 1.868688] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 1.875985] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.881412] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 1.887606] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400 [ 1.887689] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.887875] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.895717] pci 0000:01:00.0: [10ee:8024] type 00 class 0x058000 [ 1.895744] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x000fffff] [ 1.895781] pci 0000:01:00.0: reg 18: [mem 0x00000000-0x0000ffff 64bit pref] [ 1.912102] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.912160] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 1.916952] pci 0000:00:01.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 1.924680] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x130fffff] [ 1.931427] pci 0000:01:00.0: BAR 2: assigned [mem 0x20000000-0x2000ffff 64bit pref] [ 1.939180] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.944090] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 1.950837] pci 0000:00:01.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 1.958579] PCI: enabling device 0000:00:01.0 (0140 -> 0143) [ 1.964364] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.971117] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.977650] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 1.977754] aer 0000:00:01.0:pcie02: service driver aer loaded [ 1.979537] tsec tsec: initialized [ 1.981939] tsec tsecb: initialized [ 1.986045] nvdec nvdec: initialized [ 1.990313] falcon vic03: initialized [ 1.993195] falcon msenc: initialized [ 1.996566] falcon nvjpg: initialized [ 2.000032] tegradc tegradc.1: Display dc.54240000 registered with id=0 [ 2.005869] of_dc_parse_platform_data: DC OR node is connected to /host1x/sor1 [ 2.013229] display board info: id 0x0, fab 0x0 [ 2.018191] display board info: id 0x0, fab 0x0 [ 2.022437] invalid panel compatible [ 2.025611] parse_tmds_config: No tmds-config node [ 2.030466] of_get_named_gpio_flags exited with status 225 [ 2.030484] of_dc_parse_platform_data: could not find vrr-settings node [ 2.036998] of_dc_parse_platform_data: nvidia,hdmi-vrr-caps not present [ 2.043632] of_dc_parse_platform_data: could not find SD settings node [ 2.050049] of_dc_parse_platform_data: could not find cmu node [ 2.055880] of_dc_parse_platform_data: could not find cmu node for adobeRGB [ 2.062807] tegradc tegradc.1: DT parsed successfully [ 2.068022] hdmi: couldn't get regulator vdd_hdmi_5v0 [ 2.073012] display board info: id 0x0, fab 0x0 [ 2.077899] gpio wake53 for gpio=225 [ 2.081801] tegradc tegradc.1: probed [ 2.149858] Console: switching to colour frame buffer device 80x30 [ 2.157354] tegradc tegradc.1: fb registered [ 2.162163] tegra_camera_platform tegra-camera-platform.43: tegra_camera_probe:camera_platform_driver probe [ 2.172664] misc tegra_camera_ctrl: tegra_camera_isomgr_register camera's max_iso_bw 3600000 [ 2.183750] tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels [ 2.192347] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.199036] of_serial 70006200.serial: RX periodic polling enabled [ 2.204716] 70006200.serial: ttyS0 at MMIO 0x70006200 (irq = 78) is a Tegra [ 2.211502] console [ttyS0] enabled, bootconsole disabled [ 2.222422] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA [ 2.233173] serial-tegra 70006300.serial: RX in PIO mode [ 2.239936] 70006300.serial: ttyTHS3 at MMIO 0x70006300 (irq = 122) is a SERIAL_TEGRA [ 2.252552] (null): coherent DMA mask is unset [ 2.258610] gk20a gpu.0: failed to allocate secure buffer -12 [ 2.270671] brd: module loaded [ 2.277665] loop: module loaded [ 2.282668] zram: Created 1 device(s) ... [ 2.288223] nct1008_nct72 0-004c: find device tree node, parsing dt [ 2.296052] nct1008_nct72 0-004c: starting parse dt [ 2.302515] of_get_named_gpio_flags exited with status 188 [ 2.302554] nct1008_nct72 0-004c: success parsing dt [ 2.309118] nct1008_nct72 0-004c: success in enabling rail vdd_nct72 [ 2.383382] NCT72: Enabled overheat logging at 104.00C [ 2.390076] gpio wake33 for gpio=188 [ 2.395154] nct1008_nct72 0-004c: nct1008_probe: initialized [ 2.404528] tegra_profiler: Branch: Dev [ 2.409735] tegra_profiler: Version: 1.107 [ 2.415177] tegra_profiler: Samples version: 36 [ 2.420976] tegra_profiler: IO version: 20 [ 2.426305] armv8_pmu: imp: 0x41, idcode: 0x1 [ 2.431862] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [ 2.439709] armv8_pmu: imp: 0x41, idcode: 0x1 [ 2.445249] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [ 2.453065] armv8_pmu: imp: 0x41, idcode: 0x1 [ 2.458553] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [ 2.466324] armv8_pmu: imp: 0x41, idcode: 0x1 [ 2.471790] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [ 2.479653] tegra_profiler: auth: init [ 2.484929] tegra-sata tegra-sata.0: version 1.0 [ 2.484944] of_get_named_gpio_flags: can't parse gpios property [ 2.484950] of_get_named_gpio_flags: can't parse gpios property [ 2.485337] t210_sata_uphy_pll_init: sata uphy already enabled [ 2.492948] tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode [ 2.504399] tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pmp pio slum part sadm apst [ 2.516098] scsi0 : tegra-sata [ 2.520577] scsi1 : tegra-sata [ 2.524949] ata1: SATA max UDMA/133 irq 55 [ 2.530254] ata2: DUMMY [ 2.534429] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 2.543009] spi-tegra114 7000da00.spi: Static pin configuration used [ 2.550832] spi_master spi3: cannot find modalias for /spi@7000da00/prod-settings [ 2.561703] tun: Universal TUN/TAP device driver, 1.6 [ 2.568095] tun: (C) 1999-2004 Max Krasnyansky [ 2.575856] usbcore: registered new interface driver r8152 [ 2.582753] usbcore: registered new interface driver cdc_ether [ 2.589960] usbcore: registered new interface driver cdc_ncm [ 2.596947] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.605077] ehci-pci: EHCI PCI platform driver [ 2.611013] tegra_xusb_read_usb_calib: usb_calib0 = 0x0718940f [ 2.619574] tegra-xhci tegra-xhci: XUSB device id = 0xfac (T210) [ 2.627499] tegra-xhci tegra-xhci: Firmware File: tegra21x_xusb_firmware (124416 Bytes) [ 2.638314] tegra-xhci tegra-xhci: Firmware DMA Memory: dma 0x0000000080060000 mapped 0xffffff8000349000 (124416 Bytes) [ 2.638456] usbcore: registered new interface driver cdc_wdm [ 2.638489] usbcore: registered new interface driver usb-storage [ 2.638509] usbcore: registered new interface driver nvshieldled [ 2.673346] tegra-xhci tegra-xhci: num_hsic_port 0 [ 2.681520] tegra-xhci tegra-xhci: Firmware timestamp: 2016-06-16 13:21:43 UTC, Version: 50.16 release, Falcon state 0x20 [ 2.695163] tegra-xhci tegra-xhci: Nvidia xHCI Host Controller [ 2.702397] tegra-xhci tegra-xhci: new USB bus registered, assigned bus number 1 [ 2.713195] tegra-xhci tegra-xhci: irq 71, io mem 0x70090000 [ 2.720274] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.728435] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.738309] usb usb1: Product: Nvidia xHCI Host Controller [ 2.745156] usb usb1: Manufacturer: Linux 3.10.96-tegra tegra-xhci [ 2.752737] usb usb1: SerialNumber: tegra-xhci [ 2.758813] xHCI xhci_add_endpoint called for root hub [ 2.758820] xHCI xhci_check_bandwidth called for root hub [ 2.758903] hub 1-0:1.0: USB hub found [ 2.764057] hub 1-0:1.0: 5 ports detected [ 2.802061] max77620-rtc max77620-rtc.1: rtc core: registered max77620-rtc as rtc1 [ 2.842057] tegra-xhci tegra-xhci: Nvidia xHCI Host Controller [ 2.849316] tegra-xhci tegra-xhci: new USB bus registered, assigned bus number 2 [ 2.859562] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.867755] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.877717] usb usb2: Product: Nvidia xHCI Host Controller [ 2.884667] usb usb2: Manufacturer: Linux 3.10.96-tegra tegra-xhci [ 2.892349] usb usb2: SerialNumber: tegra-xhci [ 2.898324] Wake51 for irq=118 [ 2.902760] Enabling wake51 [ 2.907244] Wake16 for irq=34 [ 2.911531] Enabling wake16 [ 2.916304] xHCI xhci_add_endpoint called for root hub [ 2.916311] xHCI xhci_check_bandwidth called for root hub [ 2.916389] hub 2-0:1.0: USB hub found [ 2.921399] hub 2-0:1.0: 4 ports detected [ 2.926699] tegra-rtc 7000e000.rtc: rtc core: registered tegra-rtc as rtc0 [ 2.935048] i2c /dev entries driver [ 2.940272] of_get_named_gpio_flags exited with status 146 [ 2.940291] of_get_named_gpio_flags exited with status 147 [ 2.940828] virtual_init [ 2.946293] max77620-power-off max77620-power-off.4: Event recorder REG_NVERC : 0x0 [ 2.957850] tegra_aotag tegra-aotag.29: AOTAG probe started [ 2.964785] tegra_aotag tegra-aotag.29: nominal ft -- 105 [ 2.971462] tegra_aotag tegra-aotag.29: tall -- 76 [ 2.977508] tegra_aotag tegra-aotag.29: tiddq -- 1 [ 2.983527] Wake44 for irq=81 [ 2.987636] Wake40 for irq=53 [ 2.991688] Wake41 for irq=53 [ 2.995671] Wake42 for irq=53 [ 2.999592] Wake43 for irq=53 [ 3.003512] tegra_aotag tegra-aotag.29: ten-count -- 16 [ 3.009664] tegra_aotag tegra-aotag.29: tsample -- 9 [ 3.015527] tegra_aotag tegra-aotag.29: pdiv -- 8 [ 3.021080] tegra_aotag tegra-aotag.29: nominal cp -- 25 [ 3.027305] tegra_aotag tegra-aotag.29: pdiv-ate -- 8 [ 3.033182] tegra_aotag tegra-aotag.29: tsamp-ate -- 39 [ 3.039214] tegra_aotag tegra-aotag.29: compensation A,B -- 10632,-67490 [ 3.046757] tegra_aotag tegra-aotag.29: sensor found :ID 0, Name: aotag0 [ 3.054316] tegra_aotag tegra-aotag.29: reading fuse value for sensor 0 [ 3.061783] tegra_aotag tegra-aotag.29: base-cp:23a shifted-cp:2 [ 3.068661] tegra_aotag tegra-aotag.29: base-ft:4d7 shifted-ft:fffffffa [ 3.076117] tegra_aotag tegra-aotag.29: actual_aotag_cp 260, ft 1020 [ 3.083280] tegra_aotag tegra-aotag.29: - Tsens calib value - 0x3601a1a [ 3.090703] tegra_aotag tegra-aotag.29: CPmask 1fff FTmask 3ffe000 [ 3.097691] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.104655] tegra_aotag tegra-aotag.29: Tsense calib CP - 0x1a1a [ 3.104792] ata1.00: ATA-9: HAGIWARA HFDMSS-015GD(A10AEI, 00950020, max UDMA/133 [ 3.104797] ata1.00: 29323728 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.105043] ata1.00: configured for UDMA/133 [ 3.122332] scsi 0:0:0:0: Direct-Access ATA HAGIWARA HFDMSS- 0095 PQ: 0 ANSI: 5 [ 3.122698] sd 0:0:0:0: [sda] 29323728 512-byte logical blocks: (15.0 GB/13.9 GiB) [ 3.122703] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.122950] sd 0:0:0:0: [sda] Write Protect is off [ 3.122956] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.123034] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.128322] sda: sda1 [ 3.129020] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.186613] tegra_aotag tegra-aotag.29: Tsense Actual CP d.34970 [ 3.193944] tegra_aotag tegra-aotag.29: Tsense calib FT - 0x1b00 [ 3.201239] tegra_aotag tegra-aotag.29: Tsense Actual FT d.38368 [ 3.208531] tegra_aotag tegra-aotag.29: delta ts 3398, temp 760 [ 3.215730] tegra_aotag tegra-aotag.29: thermA-843, thermB--810 [ 3.222931] tegra_aotag tegra-aotag.29: Registering sensor 0 [ 3.229940] tegra_aotag tegra-aotag.29: Bound to TZ : ID 0 [ 3.236687] tegra_aotag tegra-aotag.29: shutdown temperature - 110 [ 3.242412] usb 2-1: new SuperSpeed USB device number 2 using tegra-xhci [ 3.252083] tegra_aotag tegra-aotag.29: AOTAG EN 60 [ 3.258207] tegra_aotag tegra-aotag.29: Probe done [SUCCESS]:0 [ 3.263433] usb 2-1: New USB device found, idVendor=0955, idProduct=09ff [ 3.263438] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 3.263442] usb 2-1: Product: USB 10/100/1000 LAN [ 3.263446] usb 2-1: Manufacturer: Nvidia [ 3.263449] usb 2-1: SerialNumber: 000001000000 [ 3.298613] Tegra210 cpuidle driver [ 3.303900] sdhci: Secure Digital Host Controller Interface driver [ 3.311142] sdhci: Copyright(c) Pierre Ossman [ 3.316545] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.323506] of_get_named_gpio_flags: can't parse gpios property [ 3.323514] of_get_named_gpio_flags: can't parse gpios property [ 3.323520] of_get_named_gpio_flags: can't parse gpios property [ 3.323565] mmc0: sdhci_tegra_probe line=5737 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0 [ 3.336286] sdhci-tegra sdhci-tegra.3: Parent select= pll_p rate=408000000 [ 3.344336] sdhci-tegra sdhci-tegra.3: Parent select= pll_c4_out2 rate=199680000 [ 3.353968] Could not add sdhci-tegra.3 to power domain using device tree [ 3.362542] sdhci-tegra sdhci-tegra.3: Speedo value 1918 [ 3.370048] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1125, boot_mv 1125, min_or_mv 0 [ 3.381541] regulator_get() failed for (sdhci-tegra.3,vqmmc), -19 [ 3.389015] mmc0: no vqmmc regulator found [ 3.394573] regulator_get() failed for (sdhci-tegra.3,vmmc), -19 [ 3.402005] usb 2-1: reset SuperSpeed USB device number 2 using tegra-xhci [ 3.410309] mmc0: no vmmc regulator found [ 3.452051] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA [ 3.462289] of_get_named_gpio_flags: can't parse gpios property [ 3.462297] of_get_named_gpio_flags: can't parse gpios property [ 3.462303] of_get_named_gpio_flags: can't parse gpios property [ 3.462346] mmc1: sdhci_tegra_probe line=5737 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0 [ 3.475884] sdhci-tegra sdhci-tegra.1: Parent select= pll_p rate=408000000 [ 3.484368] Could not add sdhci-tegra.1 to power domain using device tree [ 3.493328] sdhci-tegra sdhci-tegra.1: Speedo value 1918 [ 3.500271] sdhci-tegra sdhci-tegra.1: Tuning constraints: nom_mv 1125, boot_mv 1125, min_or_mv 0 [ 3.512864] regulator_get() failed for (sdhci-tegra.1,vqmmc), -19 [ 3.520621] mmc1: no vqmmc regulator found [ 3.526373] regulator_get() failed for (sdhci-tegra.1,vmmc), -19 [ 3.534003] mmc1: no vmmc regulator found [ 3.572066] mmc1: SDHCI controller on sdhci-tegra.1 [sdhci-tegra.1] using ADMA [ 3.583635] of_get_named_gpio_flags exited with status 201 [ 3.583655] of_get_named_gpio_flags exited with status 204 [ 3.583662] of_get_named_gpio_flags: can't parse gpios property [ 3.584010] of_get_named_gpio_flags exited with status 96 [ 3.584038] of_get_named_gpio_flags exited with status 97 [ 3.584125] of_get_named_gpio_flags exited with status 98 [ 3.584223] of_get_named_gpio_flags exited with status 99 [ 3.584375] of_get_named_gpio_flags exited with status 100 [ 3.584583] of_get_named_gpio_flags exited with status 101 [ 3.584593] mmc2: sdhci_tegra_probe line=5737 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0 [ 3.598464] sdhci-tegra sdhci-tegra.0: Parent select= pll_p rate=408000000 [ 3.607135] Could not add sdhci-tegra.0 to power domain using device tree [ 3.616182] sdhci-tegra sdhci-tegra.0: Speedo value 1918 [ 3.620885] r8152 2-1:1.0 eth0: v2.03.3 (2015/01/29) [ 3.620890] r8152 2-1:1.0 eth0: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 3.651728] sdhci-tegra sdhci-tegra.0: Tuning constraints: nom_mv 1125, boot_mv 1125, min_or_mv 0 [ 3.655794] mmc0: BKOPS_EN bit is not set [ 3.669411] regulator_get() failed for (sdhci-tegra.0,vqmmc), -19 [ 3.677072] mmc2: no vqmmc regulator found [ 3.682715] regulator_get() failed for (sdhci-tegra.0,vmmc), -19 [ 3.690259] mmc2: no vmmc regulator found [ 3.732054] mmc2: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA [ 3.742442] gpio wake35 for gpio=201 [ 3.749684] tegra-se tegra21-se: tegra_se_probe: complete [ 3.757013] tegra_bootloader_debug: Created tegra_bootloader directory [ 3.765091] tegra_bootloader_debug: Created sysfs interface tegra_bootloader_verify_regs in tegra_bootloader directory [ 3.778773] tegra_bootloader_debug: Created sysfs interface tegra_bootloader_prof in tegra_bootloader directory [ 3.792612] mmc0: tap value and tuning window after hw tuning completion ... [ 3.793100] tegra_throttle : init passed [ 3.794012] cpu-tegra: init EDP limit: 1122 MHz [ 3.794457] pll_x: not ready for dynamic ramp to 921600000 [ 3.794489] pll_x: not ready for dynamic ramp to 921600000 [ 3.795669] soctherm: prog thresholds [ 3.795672] soctherm: prog thresholds [ 3.795674] soctherm: tz:2 not found, skip thresh prog [ 3.795676] soctherm: prog thresholds [ 3.795686] soctherm: skipping sensor 4 programming [ 3.795688] soctherm: skipping sensor 5 programming [ 3.795693] soctherm: trip_point temp 127500 forced to 127000 [ 3.868389] mmc0: tuning_window[0]: 0xffffffff [ 3.868405] GACT probability NOT on [ 3.868411] Mirror/redirect action on [ 3.868415] u32 classifier [ 3.868416] Actions configured [ 3.868422] Netfilter messages via NETLINK v0.30. [ 3.868469] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3.905231] mmc0: tuning_window[1]: 0xffffffe7 [ 3.910830] mmc0: tuning_window[2]: 0xffffe3ff [ 3.911018] ctnetlink v0.93: registering with nfnetlink. [ 3.911106] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 3.911108] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 3.937861] mmc0: tuning_window[3]: 0x7ff1ffff [ 3.938012] xt_time: kernel timezone is -0000 [ 3.938107] ipip: IPv4 over IPv4 tunneling driver [ 3.938474] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.938618] arp_tables: (C) 2002 David S. Miller [ 3.938655] TCP: cubic registered [ 3.938659] Initializing XFRM netlink socket [ 3.976254] mmc0: tuning_window[4]: 0x0 [ 3.981186] mmc0: tuning_window[5]: 0x0 [ 3.986102] mmc0: tuning_window[6]: 0x0 [ 3.990981] mmc0: tuning_window[7]: 0x0 [ 3.995865] NET: Registered protocol family 10 [ 3.995875] sdhci: Tap value: 55 | Trim value: 8 [ 3.995878] sdhci: SDMMC Interrupt status: 0x00040000 [ 3.996913] mmc0: switch to HS400 mode is successful [ 4.000783] mmc0: new HS400 MMC card at address 0001 [ 4.025238] mmcblk0: mmc0:0001 016G32 14.6 GiB [ 4.031115] mmcblk0rpmb: mmc0:0001 016G32 partition 3 4.00 MiB [ 4.038104] mip6: Mobile IPv6 [ 4.042229] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 4.043570] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 [ 4.058949] sit: IPv6 over IPv4 tunneling driver [ 4.065429] NET: Registered protocol family 17 [ 4.071037] NET: Registered protocol family 15 [ 4.076597] NET: Registered protocol family 35 [ 4.082184] Key type dns_resolver registered [ 4.085913] mmc1: queuing unknown CIS tuple 0x80 (5 bytes) [ 4.095141] Registering SWP/SWPB emulation handler [ 4.123739] isp isp.0: initialized [ 4.129401] isp isp.1: initialized [ 4.134065] vdd_gpu: disabling [ 4.138132] en-vdd-vcm-2v8: disabling [ 4.142849] usb-vbus3: disabling [ 4.147139] usb-vbus1: disabling [ 4.151424] vdd-disp-3v0: disabling [ 4.155982] snsr_pm: disabling [ 4.160071] aux-3v3: disabling [ 4.164155] lcd-bl-en: disabling [ 4.168376] max77620-gpio7: disabling [ 4.184598] vdd-cpu-fixed: disabling [ 4.189151] regulator-dummy: disabling [ 4.194564] of_get_named_gpio_flags exited with status 189 [ 4.194590] of_get_named_gpio_flags exited with status 190 [ 4.194639] gpio wake24 for gpio=189 [ 4.199215] gpio wake25 for gpio=190 [ 4.203868] input: gpio-keys as /devices/platform/gpio-keys.44/input/input0 [ 4.229690] tegra-rtc 7000e000.rtc: setting system clock to 2013-01-01 00:00:00 UTC (1356998400) [ 4.240465] vi vi: vi_probe: ++ [ 4.246433] vi vi: initialized [ 4.250790] vi vi: parsing node /host1x/vi [ 4.255866] vi vi: handling endpoint /host1x/vi/ports/port@0/endpoint [ 4.263354] vi vi: handling endpoint /host1x/vi/ports/port@1/endpoint [ 4.270774] vi vi: handling endpoint /host1x/vi/ports/port@2/endpoint [ 4.278152] vi vi: handling endpoint /host1x/vi/ports/port@3/endpoint [ 4.279130] mmc1: tap value and tuning window after hw tuning completion ... [ 4.279135] mmc1: tuning_window[0]: 0x9fffffff [ 4.279139] mmc1: tuning_window[1]: 0xffffffff [ 4.279143] mmc1: tuning_window[2]: 0xffffff1f [ 4.279146] mmc1: tuning_window[3]: 0x7fff3fff [ 4.279150] mmc1: tuning_window[4]: 0x0 [ 4.279153] mmc1: tuning_window[5]: 0x0 [ 4.279156] mmc1: tuning_window[6]: 0x0 [ 4.279159] mmc1: tuning_window[7]: 0x0 [ 4.279162] sdhci: Tap value: 49 | Trim value: 8 [ 4.279165] sdhci: SDMMC Interrupt status: 0x00040000 [ 4.282166] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 4.352223] vi vi: handling endpoint /host1x/vi/ports/port@4/endpoint [ 4.359598] vi vi: handling endpoint /host1x/vi/ports/port@5/endpoint [ 4.366981] vi vi: warning: no subdev found in graph [ 4.373426] [dram-timers] DRAM derating cdev registered. [ 4.379613] Disable partitions left on by BL [ 4.384713] sata [ 4.387690] disb [ 4.390713] ------------[ cut here ]------------ [ 4.396164] WARNING: at /home/ubuntu/jetpak/20-SPI_Flash/04-MX5/24.2.1/src/sources/kernel/drivers/platform/tegra/clock.c:563 clk_disable_locked+0x38/0x15c() [ 4.411963] Attempting to disable clock disp2 with refcnt 0 [ 4.417423] Modules linked in: [ 4.422643] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.96-tegra #1 [ 4.430227] Call trace: [ 4.433690] [] dump_backtrace+0x0/0xf4 [ 4.440094] [] show_stack+0x14/0x1c [ 4.446262] [] dump_stack+0x20/0x28 [ 4.452445] [] warn_slowpath_common+0x78/0x9c [ 4.459534] [] warn_slowpath_fmt+0x50/0x58 [ 4.466382] [] clk_disable_locked+0x38/0x15c [ 4.473444] [] clk_disable+0x50/0x88 [ 4.479832] [] partition_clk_disable+0x80/0x9c [ 4.487100] [] __tegra1xx_powergate+0x90/0xdc [ 4.494285] [] tegra1xx_powergate_partition_with_clk_off+0x18/0x4c [ 4.504506] [] tegra210_pg_powergate_clk_off+0x174/0x238 [ 4.512735] [] tegra_powergate_partition_with_clk_off+0xf4/0x134 [ 4.522965] [] tegra210_disable_boot_partitions+0x54/0x78 [ 4.531341] [] do_one_initcall+0x40/0x108 [ 4.538333] [] do_initcall_level+0x90/0xb0 [ 4.545439] [] do_initcalls+0x18/0x30 [ 4.552087] [] do_basic_setup+0x28/0x34 [ 4.558866] [] kernel_init_freeable+0xc0/0x150 [ 4.566219] [] kernel_init+0x10/0xd8 [ 4.572640] ---[ end trace fd00de30ac30b6fd ]--- [ 4.578601] Disabling clocks left on by bootloader: [ 4.584742] audio2_dmic [ 4.588682] audio1_dmic [ 4.592574] audio0_dmic [ 4.596429] audio_2x [ 4.600011] audio [ 4.603305] audio4 [ 4.606659] audio3 [ 4.609973] audio2 [ 4.613274] audio1 [ 4.616531] audio0 [ 4.619802] entropy [ 4.623084] dsi2-fixed [ 4.626544] dsi1-fixed [ 4.629939] i2c3 [ 4.632777] sdmmc4_ddr [ 4.636063] sdmmc1_ddr [ 4.639289] sor1_src [ 4.642297] cclk_lp [ 4.645734] of_get_named_gpio_flags exited with status 217 [ 4.645787] tegra_cl_dvfs 70110000.dfll-ovr: DT data retrieved successfully [ 4.653531] tune_cpu_trimmers: init soctherm cpu zone LOW [ 4.659657] tegra_cl_dvfs_init_cdev: cpu_cold cooling device registered [ 4.667039] tegra_cl_dvfs_init_cdev: cpu_hot cooling device registered [ 4.667164] Tegra CPU DFLL is initialized with use_dfll = 1 [ 4.667278] tegra_dvfs: 0.vdd-cpu-rail-ovr connected to regulator [ 4.667484] tegra_dvfs: 4.vdd-core-rail-max77620 connected to regulator [ 4.667591] tegra_dvfs: 1.vdd-gpu-rail-ovr connected to regulator [ 4.668020] CPU rate: 921 MHz [ 4.668286] last reset is due to power on reset [ 4.668288] KERNEL: PMC reset status reg: 0x0 [ 4.668832] tegra_actmon.emc: Completed initialization (0) [ 4.669191] tegra_actmon.avp: Completed initialization (0) [ 4.861873] tegra dvfs: tegra sysfs cap interface is initialized [ 4.868709] tegra dvfs: tegra sysfs gpu & emc interface is initialized [ 4.876900] Set maximum possible CPU frequency 1734000 [ 4.883144] Freeing unused kernel memory: 392K (ffffffc000d8e000 - ffffffc000df0000) [ 4.892120] Freeing alternatives memory: 36K (ffffffc000df1000 - ffffffc000dfa000) [ 4.937323] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.004365] systemd[1]: System time before build time, advancing clock. [ 5.028362] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 5.049087] systemd[1]: Detected architecture arm64. [ 5.072985] systemd[1]: Set hostname to . [ 5.186874] systemd[1]: Listening on udev Control Socket. [ 5.212163] systemd[1]: Listening on udev Kernel Socket. [ 5.232166] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.252294] systemd[1]: Created slice User and Session Slice. [ 5.272166] systemd[1]: Listening on Journal Socket. [ 5.292112] systemd[1]: Reached target Remote File Systems (Pre). [ 5.312094] systemd[1]: Reached target Remote File Systems. [ 5.332154] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.362296] systemd[1]: Reached target Encrypted Volumes. [ 5.382223] systemd[1]: Created slice System Slice. [ 5.402993] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.432955] systemd[1]: Mounting POSIX Message Queue File System... [ 5.463078] systemd[1]: Started Braille Device Support. [ 5.484571] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 5.512133] systemd[1]: Reached target Slices. [ 5.532931] systemd[1]: Mounting Debug File System... [ 5.553019] systemd[1]: Starting Journal Service... [ 5.576051] systemd[1]: Starting Load Kernel Modules... [ 5.589018] of_get_named_gpio_flags exited with status 60 [ 5.589026] of_get_named_gpio_flags: can't parse gpios property [ 5.589037] of_get_named_gpio_flags exited with status 61 [ 5.589047] of_get_named_gpio_flags exited with status 59 [ 5.589127] gpio wake52 for gpio=61 [ 5.602333] systemd[1]: Created slice system-getty.slice. [ 5.622990] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.652132] systemd[1]: Reached target Swap. [ 5.673461] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.704157] systemd[1]: Mounted Debug File System. [ 5.722160] systemd[1]: Mounted POSIX Message Queue File System. [ 5.742216] systemd[1]: Started Journal Service. [ 6.388836] m25p80 spi3.0: found mr25h256, expected mt25ql01g [ 6.388847] m25p80 spi3.0: mr25h256 (32 Kbytes) [ 6.396856] systemd-journald[161]: Received request to flush runtime journal from PID 1 [ 6.481336] cfg80211: Calling CRDA to update world regulatory domain [ 6.485917] sdhci-tegra sdhci-tegra.1: Card already in requested state [ 6.485920] sdhci-tegra sdhci-tegra.1: Card already in requested state [ 6.586650] dhd_module_init in [ 6.587282] of_get_named_gpio_flags exited with status 56 [ 6.587288] of_get_named_gpio_flags: can't parse gpios property [ 6.587367] Power-up adapter 'DHD generic adapter' [ 6.590543] wifi_platform_set_power = 1 [ 6.792062] wifi_platform_bus_enumerate device present 1 [ 6.808319] wifi_platform_bus_enumerate device present 0 [ 6.808635] SDIO Vendor ID:02d0 and SDIO Device ID: 4354 [ 6.808757] F1 signature read @0x18000000=0x17214354 [ 6.814411] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 6.815554] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 6.815680] wifi_platform_prealloc: failed to alloc static mem section 7 [ 6.815690] wifi_platform_get_mac_addr [ 6.815948] of_get_mac_address: checking /chosen dtb node for mac address property nvidia,wifi-mac [ 6.816025] wifi_get_mac_addr: XX:XX:XX:XX:XX:XX [ 6.817131] wl_setup_wiphy : Registering Vendor80211 [ 6.817592] wl_create_event_handler(): thread:wl_event_handler:14d started [ 6.817691] wl_event_handler : tsk Enter, tsk = 0xffffffc0f38c19f0 [ 6.817708] dhd_attach(): thread:dhd_watchdog_thread:14e started [ 6.819222] dhd_attach(): thread:dhd_dpc:14f started [ 6.819281] dhd_attach(): thread:dhd_rxf:152 started [ 6.819290] dhd_deferred_work_init: work queue initialized [ 6.819526] Dongle Host Driver, version 1.201.82 (r) Compiled in drivers/net/wireless/bcmdhd on Oct 22 2018 at 14:32:02 [ 6.819794] Register interface [wlan0] MAC: XX:XX:XX:XX:XX:XX [ 6.819802] dhd_prot_ioctl : bus is down. we have nothing to do [ 6.821316] wifi_platform_set_power = 0 [ 6.949063] cfg80211: World regulatory domain updated: [ 6.949071] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.949076] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6.949080] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6.949084] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 6.949087] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 6.949090] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 6.949094] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 6.949097] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 6.949100] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 7.022046] tegra_sysfs_register [ 7.152460] dhd_inetaddr_notifier_call: bus not ready, exit [ 7.902892] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.255944] PCI: enabling device 0000:01:00.0 (0140 -> 0142) [ 8.272243] Create device attribute file for major =235, instance = 0 [ 8.272252] Device file created successfully [ 8.318356] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 11.294573] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 602.093103] tegradc tegradc.1: blank - normal ubuntu@tegra-ubuntu:~$