[0020.966] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses.
[0020.974] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1)
[0020.980] I> Boot-mode: Platform RCM
[0020.983] I> Platform: Silicon
[0020.986] I> Chip revision : A02P
[0020.989] I> Bootrom patch version : 15 (correctly patched)
[0020.994] I> ATE fuse revision : 0x200
[0020.998] I> Ram repair fuse : 0x0
[0021.001] I> Ram Code : 0x1
[0021.003] I> rst_source: 0x0, rst_level: 0x0
[0021.009] I> USB configuration success
[0024.174] I> mb2 image downloaded
[0024.263] I> Recovery boot mode 0
[0024.268] I> UPHY full init done
[0024.275] I> MB1 done

[0024.280] I> Welcome to MB2(TBoot-BPMP) Applet (version: default.t194-mobile-27d8d121)
[0024.288] I> DMA Heap @ [0x40020000 - 0x40065800]
[0024.292] I> Default Heap @ [0xd486400 - 0xd48a400]
[0024.297] W> Profiler not initialized
[0024.376] I> sdmmc DDR50 mode
[0024.384] I> QSPI-0l initialized successfully
[0024.390] E> CLK_RST: instance 6 not found in module 44.
[0024.395] E> MPhy CAR configuration failed error = 1747992077
[0024.401] E> UFS initialization failed
[0024.404] I> UFS is not present
[0024.409] W> Cannot find any partition table for 00000003
[0024.415]  > PARTITION_MANAGER: Failed to publish partition.
[0024.425] I> Found 19 partitions in SDMMC_USER (instance 3)
[0024.433] I> Found 41 partitions in QSPI_FLASH (instance 0)
[0024.438] W> Profiler not initialized
[0024.441] I> Entering 3p server
[0024.444] I> USB configuration success
[0025.634] I> Populate chip info
[0025.721] I> Populate eeprom info
[0025.725] I> Populate eeprom info for module cvm
[0025.730]  > DEVICE_PROD: device prod is not initialized.
[0026.617] I> Rebooting : reboot-recovery


[0026.622] I> Reset to recovery mode
ÿ
[0223.123] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses.
[0223.131] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1)
[0223.136] I> Boot-mode: RCM
[0223.139] I> Platform: Silicon
[0223.142] I> Chip revision : A02P
[0223.145] I> Bootrom patch version : 15 (correctly patched)
[0223.150] I> ATE fuse revision : 0x200
[0223.153] I> Ram repair fuse : 0x0
[0223.156] I> Ram Code : 0x1
[0223.159] I> rst_source: 0xb, rst_level: 0x1
[0223.164] I> USB configuration success
[0225.297] I> bct_bootrom image downloaded
[0225.306] W> PROD_CONFIG: device prod data is empty in MB1 BCT.
[0225.313] I> Temperature = 32500
[0225.316] W> Skipping boost for clk: BPMP_CPU_NIC
[0225.321] W> Skipping boost for clk: BPMP_APB
[0225.325] W> Skipping boost for clk: AXI_CBB
[0225.329] W> Skipping boost for clk: AON_CPU_NIC
[0225.333] W> Skipping boost for clk: CAN1
[0225.337] W> Skipping boost for clk: CAN2
[0225.341] I> Boot-device: QSPI (instance: 0)
[0225.345] I> Qspi flash params source = mb1bct
[0225.349] I> bct_mb1 image downloaded
[0225.359] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000
[0225.367] W>  Thermal config not found in BCT
[0225.375] W>  MEMIO rail config not found in BCT
[0225.385] I> bct_mem image downloaded
[0228.377] I> blob image downloaded
[0228.468] I> Recovery boot mode 0
[0228.512] W>  Platform config not found in BCT
[0228.545] I> MB1 done

ÿ󬠩n enter
SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27
HW Function test
Start Scheduler.
in late init
ÿ
 ᙰ228.556] I> Welcome to MB2(TBoot-BPMP) Recovery (version: default.t194-mobile-7bfb41b2)
[0228.556] I> DMA Heap @ [0x526fa000 - 0x52ffa000]
[0228.557] I> Default Heap @ [0xd486400 - 0xd48a400]
[0228.559] E> DEVICE_PROD: Invalid value data = 70020000, size = 0.
[0228.564] W> device prod register failed
[0228.577] I> Relocating BR-BCT
[0228.579]  > DEVICE_PROD: device prod is not initialized.
[0228.604] E> I2C: slave not found in slaves.
[0228.605] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true.
[0228.606] E> I2C_DEV: Failed to send register address 0x00000000.
[0228.607] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0.
[0228.608] E> eeprom: Failed to read I2C slave device
[0228.611] I> Failed to read CVB eeprom data @ AE
[0228.616] I> Retrying CVB eeprom read @ AC ...
[0228.621] E> I2C: slave not found in slaves.
[0228.625] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true.
[0228.632] E> I2C_DEV: Failed to send register address 0x00000000.
[0228.638] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0.
[0228.647] E> eeprom: Failed to read I2C slave device
[0228.652] I> Failed to read CVB eeprom data @ AC
[0228.660] I> found decompressor handler: lz4
ÿ㍏TICE:  BL31: v1.4(release):0c039d514
NOTICE:  BL31: Built : 20:16:52, Aug 10 2022
ERROR:   Error initializing runtime service trusty_fast
ÿSSERT: plat/nvidia/tegra/soc/t194/plat_setup.c <543>
 ᡰmp: init
bpmp: tag is 128431eec76692047e1ac1ebc0392266
sku_dt_init: not sku 0x00
clk_early initialized
mail_early initialized
fuse initialized
hwwdt initialized
t194_ec_get_ec_list: found 45 ecs
ec initialized
vmon_setup_monitors: found 3 monitors
vmon initialized
adc initialized
fmon_populate_monitors: found 73 monitors
fmon initialized
mc initialized
reset initialized
nvhs initialized
uphy_early initialized
emc_early initialized
392 clocks registered
clk initialized
io_dpd initialized
thermal initialized
thermal_mrq initialized
i2c initialized
vrmon_dt_init: vrmon node not found
vrmon_chk_boot_state: found 0 rail monitors
vrmon initialized
regulator initialized
avfs_clk_platform initialized
soctherm initialized
aotag initialized
powergate initialized
dvs initialized
pm initialized
suspend initialized
pg_late initialized
pg_mrq_init initialized
strap initialized
nvl initialized
emc initialized
emc_mrq initialized
clk_dt initialized
tj_init initialized
/uphy is not enabled status = disabled
uphy_dt initialized
uphy_mrq initialized
uphy initialized
ec_swd_poll_start: 281 reg polling start w period 47 ms
ec_late initialized
hwwdt_late initialized
reset_mrq initialized
ec_mrq initialized
fmon_mrq initialized
clk_mrq initialized
avfs_mrq initialized
mail_mrq initialized
i2c_mrq initialized
tag_mrq initialized
console_mrq initialized
mrq initialized
clk_sync_fmon_post initialized
clk_dt_late initialized
noc_late initialized
pm_post initialized
dbells initialized
dmce initialized
cvc initialized
avfs_clk_mach_post initialized
avfs_clk_platform_post initialized
cvc_late initialized
regulator_post initialized
rm initialized
console_late initialized
clk_dt_post initialized
mc_reg initialized
pg_post initialized
profile initialized
fuse_late initialized
extras_post initialized
bpmp: init complete
entering main console loop
]