[0000.025] W> RATCHET: MB1 binary ratchet value 4 is too lage than ratchet level 2 from HW fuses. [0000.034] I> MB1(prd-version: 1.5.1.7-t194-41334769-98030a79) [0000.039] I> Boot-mode: oldboot [0000.042] I> Chip revision : A02P 0000.045] I> Bootrom patch version : 15 (correctly patched) [000.050] I> ATE fuse revision : 0x200 [0000.054] I>Ram repair fuse : 0x0 [0000.057] I> Ram Code : 0x0 [000.059] I> rst_source : 0x0 [0000.062] I> rst_level : 0x [0000.065] I> Boot-device: QSPI 0000.068] I> Qspi flash params source = brbct [000.072] I> Qspi using bpmp-dma [0000.075] I> Qspi clock source : pllp [0000.079] I> QSPI Flash Size = 32 MB [0000.082] I> Qspi initialized sccessfully [0000.086] W> No valid slot number is found in scratch register [0000.091] W> Retun default slot: _a [0000.095] I> Active Boot chain : 0 [0000.098] I> Bot-device: QSPI [0000.101] I> Qspi flash params source = brbct [0000.106] W> MB1_PLATFORM_ONFIG: device prod data is empty in MB1 BCT. [0000.11] I> Temperature = 35500 [0000.117] W> Skipping boost forclk: BPMP_CPU_NIC [0000.122] W> Skipping boost or clk: BPMP_APB [0000.126] W> Skipping boost for clk: AXI_CBB [0000.130] W> Skipping boost for clk: AON_CPU_NIC [0000.134] W> Skipping boost for clk: CAN1 [0000.138] > Skipping boost for clk: CAN2 [0000.142] I> Boot-device: QSPI [0000.14] I> Boot-device: QSPI [0000.147] I> Qspi flash params source = mb1bct [0000.151] I> Qsp using bpmp-dma [0000.154] I> Qspi clock source : pllcout0 [0000.158] I> Qspi reinitialized [0000.161] I> Qspi flash params source = mb1bt [0000.167] I> ECC region[0] Start:0x0, End:0x0 [0000.171] I> ECC region[1]: Start:00, End:0x0 [0000.175] I> ECC region[2]: Start:x0, End:0x0 [0000.179] I> ECC region[3]: Stat:0x0, End:0x0 [0000.183] I> ECC region[4]:Start:0x0, End:0x0 [0000.187] I> Non-ECC regio[0]: Start:0x80000000, End:0x100000000 [0000.193] I> NonECC region[1]: Start:0x0, End:0x0 [0000.197] I> Non-ECC region[]: Start:0x0, End:0x0 [0000.202] I> Non-ECC region[3]: tart:0x0, End:0x0 [0000.206] I> Non-ECC region[4]: Star:0x0, End:0x0 [0000.212] E> FAILED: Thermal config [0000.21] E> FAILED: MEMIO rail config [0000.229] I> Bot-device: QSPI [0000.232] I> Qspi flash prams source = mb1bct [0000.24] I> Qspi flash params source = mb1bct 0000.252] I> Qspi flash params source = mb1bct [0000.319 I> Qspi flash params source = mb1bct [0000.328 I> Qspi flash params source = mb1bct [0000.35] I> Qspi flash params source = mb1bct [0000.369 I> MB1 done ▒▒▒▒main enter SPE VERSIO #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start cheduler. in late init ▒▒ [0000.377] I> Welcome to MB2(TBoot-BPMP) (verson: 00.00.2018.32-mobile-938a8cd8) [0000.377] I> DMA Hap @ [0x526fa000 - 0x52ffa000] [0000.378] I> Default Hap @ [0xd486400 - 0xd48a400] [0000.379]E> DEVICE_PROD: Invalid value data = 70020000, ize = 0. [0000.384] W> device prod register faled [0000.388] I> Boot-device: QSPI [0000.391 I> Boot_device: QSPI_FLASH instance: 0 [0000.396] I> SPI Flash Size = 32 MB [0000.402] I> Qspi initialized uccessfully [0000.403] I> qspi flash-0 params source =boot args [0000.809 I> sdmmc DDR50 mode [0000.811] I> sdmmc-3 params source = safe params [0000.816] I> Fond 47 partitions in QSPI_FLASH (instance 0) [0000.818]W> Cannot find any partition table for 00000003 [0000.822] I> Found 11 partitions in SDMMC_USE (instance 3) [0000.823] W> No valid slot numbr is found in scratch register [0000.824] W> Rturn default slot: _a [0000.824] I> Active Bootchain : 0 [0000.825] I> parsing oem signed sectin of bpmp-fw header done [0000.826] I> bpmp-fwbinary init read from storage [0000.831] I> oem authntication of bpmp-fw header done [0000.845] I> bpmpfw binary done read from storage [0000.845] I> bmp-fw: Authentication init Done [0000.846] I> pasing oem signed section of cpubl header done [000.850] I> cpubl binary init read from storage [000.854] I> bpmp-fw: Authentication Finalize Done [0000.859] I> oem authentication of cpubl header one [0000.867] I> cpubl binary done read from torage [0000.868] I> cpubl: Authentication init one [0000.873] I> parsing oem signed section of ce header done [0000.878] I> rce binary init rad from storage [0000.882] I> Relocating BR-BT [0000.885] I> cpubl: AuthenticationFinalize Done [0000.889] I> oem authenticationof rce header done [0000.894] I> rce binary doe read from storage [0000.898] I> rce: uthentication init Done [0000.902] I> parsing om signed section of ape header done [0000.907] I ape binary init read from storage [0000.91] I> rce: Authentication Finalize Done [000.916] I> oem authentication of ape headerdone [0000.921] I> ape binary done read frm storage [0000.925] I> ape: Authetication init Done [0000.929] I> parsingoem signed section of tos header done [000.934] I> tos binary init read from storage [0000.93] I> ape: Authentication Finalize Done [000.943] I> oem authentication of tos headerdone [0000.950] I> tos binary done read from sorage [0000.952] I> tos: Authentication nit Done [0000.956] I> parsing oem signed sectin of bpmp-fw-dtb header done [0000.962] I> bpmpfw-dtb binary init read from storage [0000.967] I> tos: Authentication Finlize Done [0000.973] I> oem authentication of bpmp-fw-dtb headr done [0000.976] I> bpmp-fw-dtb binary done rad from storage [0000.981] I> bpmp-fw-dtb: Autentication init Done [0000.986] I> parsing oemsigned section of cpubl-dtb header done [0000.996] I> bpmp-fw-dtb: Authentication Finalze Done [0001.04] I> oem authentication of cpubl-dtb header done [0001.049] I> cpubl-dtb bnary done read from storage [0001.050] I> cpubl-dtb: Authentication int Done [0001.051] I> parsing oem signed sectio of eks header done [0001.051] I> eks binary iit read from storage [0001.052] I> cpubl-dtb: uthentication Finalize Done [0001.053] I> oem uthentication of eks header done [0001.057] I>eks binary done read from storage [0001.061] I eks: Authentication init Done [0001.065] I> es: Authentication Finalize Done [0001.069] I> KB detected (length: 0x410) @ VA:0x5270a400 ▒▒OTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:32, Jul 26 2021 ipc-unitest-main: 1519: Welcome to IPC unittest!!! ipcunittest-main: 1531: waiting forever ipc-unittest-srv: 329: Ini unittest services!!! hwkey-agent: 41: hwkey-agent is running! hwkey-agent: 178: Init hweky-agent services!!4 uks-srv: 40: luks-srv is running!! luks-srv: 157: Initluks-srv IPC services!! platform_bootstrap_epiog: trusty bootstrap complete ▒▒ welcome to k calling constructors initializing heap reating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag s e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized t initialized mail initialized chipid initialized fuse initialized sku initialized speedoinitialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialied vmon_populate_monitors: found 3 monitors adc initializedd fmon_populate_monitors: found 3 monitors fmon initialized fmon_mrq initialied reset initialized nvhs initialized 391 clcks registered clk_mrq_init: mrq handle registered clk initialized nvlink initialize io_dpd initialized io_dpd initialized therml initialized i2c5 controller initialized iniialized i2c mrq handling i2c initialized regulator intialized avfs_clk_platform_init: bad cl id in clock@cluster1_avfs avfs_clkplatform initialized soctherm initialized aotag initialized powergate intialized dvs initilized pm initialized pg_late initialized strap initialized tag initialized emc initilized clk_dt initialized avfs_ccplex_platform iniialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handle registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late iitialized ▒▒ [0001.427] I> Welcome to Cboot▒▒mrq initialzed WARNING: no registered clock for FMON_NAFL_CLUSTER1 (id 281) fmon_post initialized ▒▒ 0001.428] I> Cboot Version: t194-cfa2bc91 [0001.430] I CPU-BL Params @ 0xf2820000 [0001.433] I> 0) Base:0x0000000 Size:0x00000000 [0001.438] I> 1) Base:xf1100000 Size:0x00100000 ▒▒clk_set_parent faied for clk i2c2, parent pll_aon (-22) clk_set_arent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialied pm_post initialized dbells initialized avs_clk_platform_post initialized dmce initializd cvc initialized ccplex_avfs_hw_init: nafll_luster0: not monitored ccplex_avfs_hw_init: nall_cluster2: not monitored ccplex_avfs_hw_init nafll_cluster3: not monitored avfs_clk_mach_pst initialized regulator_post initialized rm nitialized sc7_diag initialized thermal_test nitialized serial_late initialized clk_post iitialized clk_dt_post initialized mc_reg initalized pg_post initialized dyn_modules initiaized sku_debugfs initialized speedo_debugfs initializd adc_debugfs initialized Failed to register PTO couner for id 281 Failed to register PTO counter fr id 281 Failed to register PTO counter for i 281 Failed to register PTO counter for id 281 clk_debugfs initialized emc_debugfs initializd dvs_debugfs initialized fmon_debugfs_init_oe: no clock debugfs node to attach FMON_NAFLL_CUSTER1 fmon_debugfs initialized vmon_debugfs iitialized pg_debugfs initialized profile_fs iitialized debugfs_cons initialized mail_fs iniialized profile initialized cvc_debugfs initilized dmce_debugfs initialized ec_debugfs iniialized rm_rail_debugfs_init: /rm/vdd_cpu: faied rm_rail_debugfs_init: /rm/vdd_cpu: failed r_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs nitialized debugfs_mrq initialized debug_mrq nitialized debug_safereg initialized initializng target calling apps_init() starting app shell entring main console loop ] ▒▒[0001.442] I> 2) Base:0xf200000 Size:0x00200000 [0001.596] I> 3) Base:0xf120000 Size:0x00200000 [0001.601] I> 4) Base:0xf1000000 Size:0x0010000 [0001.610] I> 6) Base:0xf3800000 Size:0x00400000 [000.614] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.619] I> 8)Base:0xf0e00000 Size:0x00100000 [0001.623] I> 9) Base:0xf0d0000 Size:0x00100000 [0001.628] I> 10) Base:0xf3000000 Size:0x0000000 [0001.632] I> 11) Base:0x40000000 Size:0x00040000 [0001.636] I> 1) Base:0xf0c00000 Size:0x00100000 [0001.641] I> 13) Base:0x40046000 Siz:0x00002000 [0001.650] I> 15) Base:0xac000000 Size:0x00004000 [0001.654] I 16) Base:0x4004a000 Size:0x00002000 [0001.659] I> 17) Base:0x0b00000 Size:0x00100000 [0001.663] I> 18) Base:0x4004c00 Size:0x00002000 [0001.668] I> 19) Base:0xf2200000 Size:0x0060000 [0001.672] I> 20) Base:0x4004e000 Size:0x00002000 [0001.677] I> 1) Base:0xf0ad0000 Size:0x0000c000 [0001.681] I> 22) Base:0x0000000 Size:0x00000000 [0001.686] I> 23) Base:0xf0ae0000 ize:0x00020000 [0001.690] I> 24) Base:0xf6000000 Size:0x0200000 [0001.694] I> 25) Base:0x40050000 Size:0x00002000 [0001.699] I> 26) ase:0x40040000 Size:0x00006000 [0001.703] I> 27) Base:0xf180000 Size:0x00400000 [0001.708] I> 28) Base:0xf4c00000 Sie:0x01400000 [0001.712] I> 29) Base:0xf1400000 Size:0x00400000 [0001.717] I> 30) Base:0x00000000 Size:0x00000000 [0001.721] > 31) Base:0x00000000 Size:0x00000000 [0001.726] I> 32) Base:0xf8000000Size:0x08000000 [0001.730] I> 33) Base:0x00000000 Size0x00000000 [0001.735] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.73] I> 35) Base:0xab000000 Size:0x01000000 [0001.744] I> 36) Bas:0xa0000000 Size:0x0b000000 [0001.748] I> 37) Base:0xf2800000 ize:0x00800000 [0001.752] I> 38) Base:0x80000000 Size:0x20000000 [0001757] I> 39) Base:0xb0000000 Size:0x08000000 [0001.761] I> 40) ase:0x00000000 Size:0x00000000 [0001.766] I> 41) Base:0x0000000 Size:0x00000000 [0001.770] I> 42) Base:0x00000000 Size:0x0000000 [0001.775] I> 43) Base:0x00000000 Size:0x00000000 [0001.779] I> 4) Base:0x00000000 Size:0x00000000 [0001.784] I> 45) Base:0x0000000 Size:0x00000000 [0001.788] GIC-SPI Target CPU: 0 [0001.79] Interrupts Init done [0001.794] calling constructors [0001.97] initializing heap [0001.800] I> Heap: [0xa0699b80 ... 0xab00000] [0001.804] initializing threads [0001.807] initializin timers [0001.810] creating bootstrap completion thread [0001.814] to of bootstrap2() [0001.817] CPU: MIDR: 0x4E0F0040, MPIDR: 0x8000000 [0001.821] initializing platform [0001.824] E> DVICE_PROD: Invalid value data = 0, size = 0. [0001.830] W> devce prod register failed [0001.833] I> Bl_dtb @0xaaf00000 [000.839] W> "plugin-manager" doesn't exist, creating [0001.841] W "ids" doesn't exist, creating [0001.845] W> "connection" doesn't exist,creating [0001.850] W> "configs" doesn't exist, creating [000.860] E> failed to read label property for node 184544: 13 [001.863] E> failed to read reg property for node 184608: 13 [0001867] E> failed to read reg property for node 184660: 13 [0001.73] E> failed to read reg property for node 184744: 13 [0001.80] I> Find /i2c@3160000's alias i2c0 [0001.881] I> Reading eeprom i2c= address=0x50 [0001.910] I> Device at /i2c@3160000:0x50 [0001910] I> Reading eeprom i2c=0 address=0x57 [0001.911] E> I2C: save not found in slaves. [0001.911] E> I2C: Could not write 0 ytes to slave: 0x00ae with repeat start true. [0001.912] E> I2CDEV: Failed to send register address 0x00000000 [0001.912] E> I2C_DEV: Could not read 256 regsters of size 1 from slave 0xae at 0x00000000 va instance 0. [0001.920] E> eeprom: Failed to ead I2C slave device [0001.925] I> Eeprom readfailed 0x3526070d [0001.930] I> Find /i2c@c240000's alis i2c1 [0001.933] I> Reading eeprom i2c=1 addrss=0x50 [0001.938] E> I2C: slave not found in laves. [0001.941] E> I2C: Could not write 0 byes to slave: 0x00a0 with repeat start true. [001.949] E> I2C_DEV: Failed to send register addess 0x00000000. [0001.955] E> I2C_DEV: Could no read 256 registers of size 1 from slave 0xa0 a 0x00000000 via instance 1. [0001.964] E> eeprom: Retr to read I2C slave device. [0001.969] E> I2C: lave not found in slaves. [0001.973] E> I2C: Could notwrite 0 bytes to slave: 0x00a0 with repeat star true. [0001.981] E> I2C_DEV: Failed to send rgister address 0x00000000. [0001.986] E> I2C_DV: Could not read 256 registers of size 1 from lave 0xa0 at 0x00000000 via instance 1. [0001.996 E> eeprom: Failed to read I2C slave device [002.001] I> Eeprom read failed 0x3526070d [0002005] I> create_pm_ids: id: 3668-0001-301-E, len 15 [0002.010] I> config: mem-type:00,power-cofig:00,misc-config:00,modem-config:00,touch-conig:00,display-config:00,, len: 93 [0002.021] I Adding plugin-manager/ids/3668-0001-301=/i2c@360000:module@0x50 [0002.029] W> "i2c@3160000" oesn't exist, creating [0002.033] W> "module@050" doesn't exist, creating [0002.039] I> Adding plugi-manager/cvm [0002.041] W> "chip-id" doesn't exst, creating [0002.045] I> Adding plugin-manager/chip-d/A02P [0002.049] I> Plugin-manager override starting [0002.04] I> node /plugin-manager/fragment-pcie-c5-rp matches [0002.05] I> node /plugin-manager/fragement-tegra-wdt-en atches [0002.073] I> Disable plugin-manager staus in FDT [0002.073] I> Plugin-manager override finished successfully [0002.075] I> gio framework initialized [0002.080] I> tegrabl_gpio_driver_regster: register 'nvidia,tegra194-gpio' driver [0002.087 I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpi-aon' driver [0002.094] I> tegrabl_tca9539_init: i2c bus: 1, save addr: 0x46 [0002.101] W> fetch_driver_phanle_from_dt: failed to get node with compatible i,tca9539 [0002.109] W> fetch_driver_phandle_frm_dt: failed to get node with compatible nxp,tc9539 [0002.115] W> tegrabl_tca9539_init: faile to fetch phandle from dt [0002.121] I> tegrabl_tca953_init: i2c bus: 1, slave addr: 0x44 [0002.128]W> fetch_driver_phandle_from_dt: failed to get node wit compatible ti,tca9539 [0002.136] W> fetch_drier_phandle_from_dt: failed to get node with comatible nxp,tca9539 [0002.143] W> tegrabl_tca959_init: failed to fetch phandle from dt [0002.51] I> fixed regulator driver initialized [000.159] I> register 'maxim' power off handle [002.160] I> virtual i2c enabled [0002.161] I> reistered 'maxim,max20024' pmic [0002.165] I> terabl_gpio_driver_register: register 'max20024-gio' driver [0002.172] I> Boot-device: QSPI [002.175] I> Boot_device: QSPI_FLASH instance: 0 [0002.10] I> QSPI source rate = 204000 Khz [0002.183] > Requested rate for QSPI clock = 34000 Khz [0002.188]I> BPMP-set rate for QSPI clk = 34000 Khz [000.193] I> QSPI Flash Size = 32 MB [0002.201] I>Qspi initialized successfully [0002.201] I> qsi flash-0 params source = boot args [0002.210] I> config: mem-type:00,power-config:0,misc-config:00,modem-config:00,touch-config:0,display-config:00,, len: 93 [0002.225] I> sdmc-3 params source = safe params [0002.227] I> ound 47 partitions in QSPI_FLASH (instance 0) 0002.247] W> Cannot find any partition table fo 00000003 [0002.260] I> Found 11 partitions inSDMMC_USER (instance 3) [0002.26] E> invalid display type [0002.269] E> cannotfind any other nvdisp nodes [0002.270] E> no vlid display unit config found in dtb [0002.271 W> display init failed [0002.271] I> Load in Boot Boot Options partition and parse it [0002272] I> boot-order :- [0002.273] I> 1.sd [000.273] I> 2.usb [0002.273] I> 3.emmc [0002.273 I> 4.net [0002.275] I> tftp-server-ip: 192.16.0.1 [0002.278] W> parse_ip_info: static-ip ino is not required, only tftp-server-ip is requied. [0002.287] W> Failed to parse GUID [0002.90] I> boot-dev-order :- [0002.293] I> 1.sd [002.294] I> 2.usb [0002.296] I> 3.emmc [0002.29] I> 4.net [0002.300] I> Hit any key to stop atoboot: 43 21 [0004.308] initializing target [0004.308] calling apps_init() [0004.309] starting app kernel_boot_app [0004.319] I> found decompressorhandler: lz4-legacy [0004.320] I> decompressing BMP blb ... [0004.33] I> Kernel type = Normal [0004.331] I> ########## SD (0) boot########## [0004.332] I> No sdcard [0004.332] I> -0 params sorce = [0004.332] E> Blockdev open: exit error [0004.332] E> D boot failed, err: 724238353 [0004.333] I> ########## USB (0)boot ########## [0004.338] W> No valid slot number is ound in scratch register [0004.338] W> Return default slot: _a [0004.351] I> Validate XUSB-FW ... [0004.351] I> T19x: Authenicate XUSB-FW (bin_type: 11), max size 0x30000 [0004.33] I> Encryption fuse is not ON [0004.353] I> USB Firmware Verion: 60.09 release [0004.412 I> regulator of usb2-0 already enabled [0004.420] I> enabling 'usb_en' regulator [0004.423] I> regulator of usb2-2 already enabled [0005.490] > USB 2.0 port 3 new high-speed USB device detected [0005.492] W> WARNING: event and command not matching, cmd_trb_pr = 0xa42d4a00, cmd_ring.dma = 0xa42d4ac0 [0005.59] I> Start to enumerate device [0005.594] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa42d400, cmd_ring.dma = 0xa42d4ac0 [0005.599] I> [0005.599] I> Enumerated USB Devie 0424:2517 [0005.599] I> [0005.601] I> Hub: [0005.601] I> Downstream ports : 7 [0005.601]I> Power switching : Ganged [0005.601] I> Copound device : No [0005.602] I> Over-current rotection : Global [0005.606] I> Hub avg delay : 4 s [0005.610] I> Set interface = 1 (alt setting) [0005.615] I>Enable hub ports [0006.66] E> No device found on any of the hub ports [0006.660] E> failed to start xhci controller [0006.661] E> Error n init of XUSB host driver, err: 7979000d [0006.661] W> Failed toinitialize device 5-0 [0006.662] E> USB boot failed, err: 203773005 [0006.662] I> ########## Fixed storage boot ######### [0006.663] I> Loading kernel-bootctrl frm partition [0006.667] I> Loading partition kernel-bootctrl at0xa4330000 from device(0x1) [0006.682] W> tegrabl_get_kernel_botctrl: magic number(0x00000000) is invalid [0006.683] W> tegral_get_kernel_bootctrl: use default dummy boot control data [006.689] I> Already published: 00010003 [0006.692] I> Lok for boot partition [0006.696] I> Fallback: assuming 0th parttion is boot partition [0006.701] I> Detect filesystem [0006.28] I> Loading extlinux.conf ... [0006.729] I> Loading extlinu.conf binary from rootfs ... [0006.729] I> rootfs path: /sdmmcuser/boot/extlinux/extlinux.conf [0006.78] I> Loading extlinux.conf sig file from rootfs ... [0006.785] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.cnf.sig [0006.82] I> overload load_size to 848 (from 890) [0006.822] I> Validate extlinux.conf ... [0006.822]I> T19x: Authenticate extlinux.conf (bin_type: 54), max size 0x2000 [0006.823] E> digest on binary did not mach!! [0006.823] C> OEM authentication of extlinux.conf payload ailed! [0006.823] W> Failed to validate extlinux.conf binary from roots (err=1077936152, fail=0) [0006.830] W> Security fuse not bured, ignore validation failure [0006.835] I> restore load_size o 890 [0006.839] I> L4T boot options [0006.842] I> [1]: "primry kernel" [0006.845] I> Enter choice: [0009.48] I> Continuing with default option: 1 [0009.848] I> Loading kernel ... [0009.848] I> Loading kenel binary from rootfs ... [0009.849] I> rootfs path: /sdmc_user/boot/Image [0010.25] I> Loading kernel sig file from rootfs ... [0010.254] I> rootfs path: /sdmmc_user/boot/Imag.sig [0010.27] I> overload load_size to 34484232 (from 34484240) [0010.279] I> Vaidate kernel ... [0010.280] I> T19x: Authenticate kernel (bin_type: 37) max size 0x5000000 [0010.594 I> Encryption fuse is not ON [0010.619] I>Loading kernel-dtb ... [0010.619] I> No kernel-dtb binary path [0010.620] > Continue to load from partition ... [0010.620] W> No valid slot numbr is found in scratch register [0010.620] W> Rturn default slot: _a [0010.621] I> A/B: bin_type (38) slt 0 [0010.621] I> Loading kernel-dtb from partition [010.622] I> Loading partition kernel-dtb at 0x91000000 rom device(0x1) [0010.640] I> T19x: Authenticate kernel-dtb (bin_type: 38), maxsize 0x400000 [0010.642] I> Encryption fuse is not ON [0010.63] I> Loading ramdisk from rootfs ... [0010.647] I> Loading radisk binary from rootfs ... [0010.652] I> rootfs path: /sdmmc_user/boo/initrd [0010.758 I> Loading ramdisk sig file from rootfs ... [0010.759] I> rootfs path: /sdmmc_user/boot/initrd.sig [0010.78] I> overload load_size to 7238344 (from 7238352) [0010.790] I> Validate ramdisk ... [0010.790] I> T19x:Authenticate ramdisk (bin_type: 54), max size 0x4000000 [0010.856 I> Encryption fuse is not ON [0010.865] I> Kernel hdr @0xa433000 [0010.865] I> Kernel dtb @0x90000000 [0010.865] I> decompressor handler not found [0010866] I> Copying kernel image (34484232 bytes) from 0xa430000 to 0x80080000 ... [0010.872] I> Done [0010.873] I> Update bpmp info to DTB [0010.874] I> Ramdisk: Base: 0x92000000; Siz: 0x6e72c8 [0010.874] I> Updated initrd info to DTB [0010.874 W> WARN: Fail to override "console=none" in commandline [0010878] I> Active rootfs suffix: [0010.881] E> tegrabl_linuxbootadd_disp_param, du 0 failed to get display params [0010.888] E tegrabl_linuxboot_add_disp_param, du 0 failed to get display prams [0010.896] E> tegrabl_linuxboot_add_disp_param, du 0 faild to get display params [0010.903] W> No valid slot number is found inscratch register [0010.909] W> Return default slot: _a [0010.12] I> Active slot suffix: [0010.915] I> add_boot_slot_suffix slot_suffix = [0010.920] I> Linux Cmdline: console=ttyTCU0,15200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.20.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegraen_boot_part_access=1 [0010.944] I> Updated bootarg info to DTB [001.948] W> MAC addr invalid! [0010.951] E> Failed to get WIFI MAC address [0010.955] W> MAC addr invalid! [0010.958] E> Failed to get Bluetooth AC address [0010.962] I> eeprom_get_mac_addr: MAC (typ: 2): 48:b0:2d:5f:f8:06 [0010.969] W> "plugin-manager" doesn'texist, creating [0010.973] I> Adding /chosen/plugin-manager/cvm [0010.977] W>"chip-id" doesn't exist, creating [0010.982] I> Adding /chosen/plugin-anager/chip-id [0010.986] W> "configs" doesn't exist, creating [0010.991] I> Addng /chosen/plugin-manager/configs [0010.995] W> "ids" doesn't xist, creating [0010.999] I> Adding /chosen/plugin-manaer/ids [0011.004] W> "odm-data" doesn't exist, creating [0011008] I> Adding /chosen/plugin-manager/odm-data [0011.015] W> "emory" doesn't exist, creating [0011.017] I> [0] START: 0x8000000, END: 0xac000000 [0011.021] I> [1] START: 0xac004000, END:0xf0ad0000 [0011.026] I> [2] START: 0xf0adc000, END: 0f0ae0000 [0011.031] I> dram_block larger than 80000000 [0011.35] I> [3] START: 0x100000000, END: 0x280000000 [0011.040] I> dded [base:0x80000000, size:0x2c000000] to /memory [0011.046] > added [base:0xac200000, size:0x44800000] to /memory [0011.05] I> added [base:0x100000000, size:0x180000000] to /memory [001.058] I> Updated memory info to DTB [0011.062] E> add_disp_paam: failed to get display params for du=0 [0011.068] W> "reset doesn't exist, creating [0011.072] I> Adding ecid(00000001642ca0890000000080481c0) to DT [0011.078] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0011.082] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0011.087 I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [001.092] I> NVG: Logical CPU: 3; MPIDR: 0x8000010 [0011.096] I> NVG: Logical CPU: 4; MPIDR: 0x8000200 [0011.101] I> NVG: Logical CPU: 5; MPIDR 0x80000201 [0011.106] I> Deleted cpu@6 node i DT [0011.109] I> Deleted cpu@7 node in DT [011.113] I> Deleted cluster3 node in FDT [0011.17] I> Update arm-pmu in FDT [0011.120] I> - upate property: interrupts [0011.124] I> - updat property: interrupt-affinity [0011.129] W> "mic-data" doesn't exist, creating [0011.133] I> Bot-device: QSPI [0011.136] W> Unknown boot devce [0011.139] I> Add storage-qspi to plugin-maager/misc-data [0011.144] W> Unknown storage deice [0011.148] I> Add serial number:142492107310 as DT property [0011.154] I> Plugin-manageroverride starting [0011.157] I> node /plugin-maager/fragment-pcie-c5-rp matches [0011.166] I>node /plugin-manager/fragement-tegra-wdt-en matces [0011.173] I> Disable plugin-manager statusin FDT [0011.173] I> Plugin-manager override fnished successfully [0011.179] I> tegrabl_load_ernel_and_dtb: Done [0011.183] E> tegrabl_dispay_clear: display is not initialized [0011.188]W> Boot logo display failed... [0011.192] I> Kernel EP 0x80080000, DTB: 0x90000000 [ 0.000000] Boting Linux on physical CPU 0x0 [ 0.000000] inux version 4.9.253-tegra (buildbrain@mobile-u4-5497-d3000) (gcc version 7.3.1 20180425 [linao-7.3-2018.05 revision d29120a424ecfbc167ef9006c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 MP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.00000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, re size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 4800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_art0 at MMIO32 0x000000000c168000 (options '') 0.000000] bootconsole [tegra_comb_uart0] enbled [ 0.82741] pca953x 1-0020: failed reading register [ 0.873379] pca953x 1-0021: failed reading register ▒▒WRNING: pll_d2 has no dyn ramp WARNING: atplatform/drivers/pg/pg-gpu-t194.c:185 WARNING: at platform/drivers/pg/pg-gpu-t194.c:185 ▒▒[ 3.488793] croup: cgroup2: unknown option "nsdelegate" ▒▒WARNING: at plaform/drivers/pg/pg-gpu-t194.c:185 WARNING: at platform/drivers/pg/pg-gpu-t194.c:185 ▒▒[ 4.794090] uing random self ethernet address [ 4.794232] using random host ethernet address [ 5.12656] random: crng init done [ 5.129875] random: 7 urandom warning(s) missed due to ratelimiting 5.344388] using random self ethernet address [ 5.344555] using random host ethernet address [ 6.57488] Bridge firewalling registered